diff options
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 377 |
1 files changed, 311 insertions, 66 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index aa88a067148..173c39c7648 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -172,8 +172,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * have their chain bit cleared (so that each Link TRB is a separate TD). * * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit - * set, but other sections talk about dealing with the chain bit set. - * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB. + * set, but other sections talk about dealing with the chain bit set. This was + * fixed in the 0.96 specification errata, but we have to assume that all 0.95 + * xHCI hardware can't handle the chain bit being cleared on a link TRB. */ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) { @@ -191,8 +192,14 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer while (last_trb(xhci, ring, ring->enq_seg, next)) { if (!consumer) { if (ring != xhci->event_ring) { - next->link.control &= ~TRB_CHAIN; - next->link.control |= chain; + /* If we're not dealing with 0.95 hardware, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!xhci_link_trb_quirk(xhci)) { + next->link.control &= ~TRB_CHAIN; + next->link.control |= chain; + } /* Give this link TRB to the hardware */ wmb(); if (next->link.control & TRB_CYCLE) @@ -289,16 +296,18 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index) { - struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; + unsigned int ep_state; u32 field; __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep = &xhci->devs[slot_id]->eps[ep_index]; + ep_state = ep->ep_state; /* Don't ring the doorbell for this endpoint if there are pending * cancellations because the we don't want to interrupt processing. */ - if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING) - && !(ep_ring->state & EP_HALTED)) { + if (!ep->cancels_pending && !(ep_state & SET_DEQ_PENDING) + && !(ep_state & EP_HALTED)) { field = xhci_readl(xhci, db_addr) & DB_MASK; xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr); /* Flush PCI posted writes - FIXME Matthew Wilcox says this @@ -354,7 +363,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_td *cur_td, struct xhci_dequeue_state *state) { struct xhci_virt_device *dev = xhci->devs[slot_id]; - struct xhci_ring *ep_ring = dev->ep_rings[ep_index]; + struct xhci_ring *ep_ring = dev->eps[ep_index].ring; struct xhci_generic_trb *trb; struct xhci_ep_ctx *ep_ctx; dma_addr_t addr; @@ -362,7 +371,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_cycle_state = 0; xhci_dbg(xhci, "Finding segment containing stopped TRB.\n"); state->new_deq_seg = find_trb_seg(cur_td->start_seg, - ep_ring->stopped_trb, + dev->eps[ep_index].stopped_trb, &state->new_cycle_state); if (!state->new_deq_seg) BUG(); @@ -442,9 +451,11 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, union xhci_trb *deq_ptr, u32 cycle_state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, - struct xhci_ring *ep_ring, unsigned int slot_id, - unsigned int ep_index, struct xhci_dequeue_state *deq_state) + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state) { + struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), " "new deq ptr = %p (0x%llx dma), new cycle = %u\n", deq_state->new_deq_seg, @@ -461,8 +472,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, * if the ring is running, and ringing the doorbell starts the * ring running. */ - ep_ring->state |= SET_DEQ_PENDING; - xhci_ring_cmd_db(xhci); + ep->ep_state |= SET_DEQ_PENDING; } /* @@ -481,6 +491,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, unsigned int slot_id; unsigned int ep_index; struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; struct list_head *entry; struct xhci_td *cur_td = 0; struct xhci_td *last_unlinked_td; @@ -493,9 +504,10 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, memset(&deq_state, 0, sizeof(deq_state)); slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep = &xhci->devs[slot_id]->eps[ep_index]; + ep_ring = ep->ring; - if (list_empty(&ep_ring->cancelled_td_list)) + if (list_empty(&ep->cancelled_td_list)) return; /* Fix up the ep ring first, so HW stops executing cancelled TDs. @@ -503,7 +515,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * it. We're also in the event handler, so we can't get re-interrupted * if another Stop Endpoint command completes */ - list_for_each(entry, &ep_ring->cancelled_td_list) { + list_for_each(entry, &ep->cancelled_td_list) { cur_td = list_entry(entry, struct xhci_td, cancelled_td_list); xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n", cur_td->first_trb, @@ -512,7 +524,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * If we stopped on the TD we need to cancel, then we have to * move the xHC endpoint ring dequeue pointer past this TD. */ - if (cur_td == ep_ring->stopped_td) + if (cur_td == ep->stopped_td) xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td, &deq_state); else @@ -523,14 +535,15 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * the cancelled TD list for URB completion later. */ list_del(&cur_td->td_list); - ep_ring->cancels_pending--; + ep->cancels_pending--; } last_unlinked_td = cur_td; /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { - xhci_queue_new_dequeue_state(xhci, ep_ring, + xhci_queue_new_dequeue_state(xhci, slot_id, ep_index, &deq_state); + xhci_ring_cmd_db(xhci); } else { /* Otherwise just ring the doorbell to restart the ring */ ring_ep_doorbell(xhci, slot_id, ep_index); @@ -543,7 +556,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * So stop when we've completed the URB for the last TD we unlinked. */ do { - cur_td = list_entry(ep_ring->cancelled_td_list.next, + cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); list_del(&cur_td->cancelled_td_list); @@ -590,7 +603,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); dev = xhci->devs[slot_id]; - ep_ring = dev->ep_rings[ep_index]; + ep_ring = dev->eps[ep_index].ring; ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); @@ -634,7 +647,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, ep_ctx->deq); } - ep_ring->state &= ~SET_DEQ_PENDING; + dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; ring_ep_doorbell(xhci, slot_id, ep_index); } @@ -644,18 +657,60 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci, { int slot_id; unsigned int ep_index; + struct xhci_ring *ep_ring; slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; /* This command will only fail if the endpoint wasn't halted, * but we don't care. */ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n", (unsigned int) GET_COMP_CODE(event->status)); - /* Clear our internal halted state and restart the ring */ - xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED; - ring_ep_doorbell(xhci, slot_id, ep_index); + /* HW with the reset endpoint quirk needs to have a configure endpoint + * command complete before the endpoint can be used. Queue that here + * because the HW can't handle two commands being queued in a row. + */ + if (xhci->quirks & XHCI_RESET_EP_QUIRK) { + xhci_dbg(xhci, "Queueing configure endpoint command\n"); + xhci_queue_configure_endpoint(xhci, + xhci->devs[slot_id]->in_ctx->dma, slot_id, + false); + xhci_ring_cmd_db(xhci); + } else { + /* Clear our internal halted state and restart the ring */ + xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } +} + +/* Check to see if a command in the device's command queue matches this one. + * Signal the completion or free the command, and return 1. Return 0 if the + * completed command isn't at the head of the command list. + */ +static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct xhci_event_cmd *event) +{ + struct xhci_command *command; + + if (list_empty(&virt_dev->cmd_list)) + return 0; + + command = list_entry(virt_dev->cmd_list.next, + struct xhci_command, cmd_list); + if (xhci->cmd_ring->dequeue != command->command_trb) + return 0; + + command->status = + GET_COMP_CODE(event->status); + list_del(&command->cmd_list); + if (command->completion) + complete(command->completion); + else + xhci_free_command(xhci, command); + return 1; } static void handle_cmd_completion(struct xhci_hcd *xhci, @@ -664,6 +719,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, int slot_id = TRB_TO_SLOT_ID(event->flags); u64 cmd_dma; dma_addr_t cmd_dequeue_dma; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_virt_device *virt_dev; + unsigned int ep_index; + struct xhci_ring *ep_ring; + unsigned int ep_state; cmd_dma = event->cmd_trb; cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, @@ -691,6 +751,47 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_free_virt_device(xhci, slot_id); break; case TRB_TYPE(TRB_CONFIG_EP): + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + break; + /* + * Configure endpoint commands can come from the USB core + * configuration or alt setting changes, or because the HW + * needed an extra configure endpoint command after a reset + * endpoint command. In the latter case, the xHCI driver is + * not waiting on the configure endpoint command. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, + virt_dev->in_ctx); + /* Input ctx add_flags are the endpoint index plus one */ + ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + if (!ep_ring) { + /* This must have been an initial configure endpoint */ + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + break; + } + ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; + xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, " + "state = %d\n", ep_index, ep_state); + if (xhci->quirks & XHCI_RESET_EP_QUIRK && + ep_state & EP_HALTED) { + /* Clear our internal halted state and restart ring */ + xhci->devs[slot_id]->eps[ep_index].ep_state &= + ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } else { + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + } + break; + case TRB_TYPE(TRB_EVAL_CONTEXT): + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + break; xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); complete(&xhci->devs[slot_id]->cmd_completion); break; @@ -805,7 +906,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, struct xhci_transfer_event *event) { struct xhci_virt_device *xdev; + struct xhci_virt_ep *ep; struct xhci_ring *ep_ring; + unsigned int slot_id; int ep_index; struct xhci_td *td = 0; dma_addr_t event_dma; @@ -814,9 +917,11 @@ static int handle_tx_event(struct xhci_hcd *xhci, struct urb *urb = 0; int status = -EINPROGRESS; struct xhci_ep_ctx *ep_ctx; + u32 trb_comp_code; xhci_dbg(xhci, "In %s\n", __func__); - xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)]; + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; if (!xdev) { xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); return -ENODEV; @@ -825,7 +930,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Endpoint ID is 1 based, our index is zero based */ ep_index = TRB_TO_EP_ID(event->flags) - 1; xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); - ep_ring = xdev->ep_rings[ep_index]; + ep = &xdev->eps[ep_index]; + ep_ring = ep->ring; ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n"); @@ -870,7 +976,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, (unsigned int) event->flags); /* Look for common error cases */ - switch (GET_COMP_CODE(event->transfer_len)) { + trb_comp_code = GET_COMP_CODE(event->transfer_len); + switch (trb_comp_code) { /* Skip codes that require special handling depending on * transfer type */ @@ -885,7 +992,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_STALL: xhci_warn(xhci, "WARN: Stalled endpoint\n"); - ep_ring->state |= EP_HALTED; + ep->ep_state |= EP_HALTED; status = -EPIPE; break; case COMP_TRB_ERR: @@ -913,7 +1020,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Was this a control transfer? */ if (usb_endpoint_xfer_control(&td->urb->ep->desc)) { xhci_debug_trb(xhci, xhci->event_ring->dequeue); - switch (GET_COMP_CODE(event->transfer_len)) { + switch (trb_comp_code) { case COMP_SUCCESS: if (event_trb == ep_ring->dequeue) { xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n"); @@ -928,8 +1035,37 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_SHORT_TX: xhci_warn(xhci, "WARN: short transfer on control ep\n"); - status = -EREMOTEIO; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; break; + case COMP_BABBLE: + /* The 0.96 spec says a babbling control endpoint + * is not halted. The 0.96 spec says it is. Some HW + * claims to be 0.95 compliant, but it halts the control + * endpoint anyway. Check if a babble halted the + * endpoint. + */ + if (ep_ctx->ep_info != EP_STATE_HALTED) + break; + /* else fall through */ + case COMP_STALL: + /* Did we transfer part of the data (middle) phase? */ + if (event_trb != ep_ring->dequeue && + event_trb != td->last_trb) + td->urb->actual_length = + td->urb->transfer_buffer_length + - TRB_LEN(event->transfer_len); + else + td->urb->actual_length = 0; + + ep->stopped_td = td; + ep->stopped_trb = event_trb; + xhci_queue_reset_ep(xhci, slot_id, ep_index); + xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); + xhci_ring_cmd_db(xhci); + goto td_cleanup; default: /* Others already handled above */ break; @@ -943,7 +1079,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (event_trb == td->last_trb) { if (td->urb->actual_length != 0) { /* Don't overwrite a previously set error code */ - if (status == -EINPROGRESS || status == 0) + if ((status == -EINPROGRESS || + status == 0) && + (td->urb->transfer_flags + & URB_SHORT_NOT_OK)) /* Did we already see a short data stage? */ status = -EREMOTEIO; } else { @@ -952,7 +1091,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, } } else { /* Maybe the event was for the data stage? */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) { + if (trb_comp_code != COMP_STOP_INVAL) { /* We didn't stop on a link TRB in the middle */ td->urb->actual_length = td->urb->transfer_buffer_length - @@ -964,7 +1103,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, } } } else { - switch (GET_COMP_CODE(event->transfer_len)) { + switch (trb_comp_code) { case COMP_SUCCESS: /* Double check that the HW transferred everything. */ if (event_trb != td->last_trb) { @@ -975,7 +1114,12 @@ static int handle_tx_event(struct xhci_hcd *xhci, else status = 0; } else { - xhci_dbg(xhci, "Successful bulk transfer!\n"); + if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) + xhci_dbg(xhci, "Successful bulk " + "transfer!\n"); + else + xhci_dbg(xhci, "Successful interrupt " + "transfer!\n"); status = 0; } break; @@ -1001,11 +1145,17 @@ static int handle_tx_event(struct xhci_hcd *xhci, td->urb->actual_length = td->urb->transfer_buffer_length - TRB_LEN(event->transfer_len); - if (td->urb->actual_length < 0) { + if (td->urb->transfer_buffer_length < + td->urb->actual_length) { xhci_warn(xhci, "HC gave bad length " "of %d bytes left\n", TRB_LEN(event->transfer_len)); td->urb->actual_length = 0; + if (td->urb->transfer_flags & + URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; } /* Don't overwrite a previously set error code */ if (status == -EINPROGRESS) { @@ -1041,30 +1191,31 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* If the ring didn't stop on a Link or No-op TRB, add * in the actual bytes transferred from the Normal TRB */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) + if (trb_comp_code != COMP_STOP_INVAL) td->urb->actual_length += TRB_LEN(cur_trb->generic.field[2]) - TRB_LEN(event->transfer_len); } } - if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL || - GET_COMP_CODE(event->transfer_len) == COMP_STOP) { + if (trb_comp_code == COMP_STOP_INVAL || + trb_comp_code == COMP_STOP) { /* The Endpoint Stop Command completion will take care of any * stopped TDs. A stopped TD may be restarted, so don't update * the ring dequeue pointer or take this TD off any lists yet. */ - ep_ring->stopped_td = td; - ep_ring->stopped_trb = event_trb; + ep->stopped_td = td; + ep->stopped_trb = event_trb; } else { - if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) { + if (trb_comp_code == COMP_STALL || + trb_comp_code == COMP_BABBLE) { /* The transfer is completed from the driver's * perspective, but we need to issue a set dequeue * command for this stalled endpoint to move the dequeue * pointer past the TD. We can't do that here because * the halt condition must be cleared first. */ - ep_ring->stopped_td = td; - ep_ring->stopped_trb = event_trb; + ep->stopped_td = td; + ep->stopped_trb = event_trb; } else { /* Update ring dequeue pointer */ while (ep_ring->dequeue != td->last_trb) @@ -1072,16 +1223,41 @@ static int handle_tx_event(struct xhci_hcd *xhci, inc_deq(xhci, ep_ring, false); } +td_cleanup: /* Clean up the endpoint's TD list */ urb = td->urb; + /* Do one last check of the actual transfer length. + * If the host controller said we transferred more data than + * the buffer length, urb->actual_length will be a very big + * number (since it's unsigned). Play it safe and say we didn't + * transfer anything. + */ + if (urb->actual_length > urb->transfer_buffer_length) { + xhci_warn(xhci, "URB transfer length is wrong, " + "xHC issue? req. len = %u, " + "act. len = %u\n", + urb->transfer_buffer_length, + urb->actual_length); + urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; + } list_del(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) { list_del(&td->cancelled_td_list); - ep_ring->cancels_pending--; + ep->cancels_pending--; } - /* Leave the TD around for the reset endpoint function to use */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) { + /* Leave the TD around for the reset endpoint function to use + * (but only if it's not a control endpoint, since we already + * queued the Set TR dequeue pointer command for stalled + * control endpoints). + */ + if (usb_endpoint_xfer_control(&urb->ep->desc) || + (trb_comp_code != COMP_STALL && + trb_comp_code != COMP_BABBLE)) { kfree(td); } urb->hcpriv = NULL; @@ -1094,7 +1270,7 @@ cleanup: if (urb) { usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n", - urb, td->urb->actual_length, status); + urb, urb->actual_length, status); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); spin_lock(&xhci->lock); @@ -1235,7 +1411,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, { int ret; struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - ret = prepare_ring(xhci, xdev->ep_rings[ep_index], + ret = prepare_ring(xhci, xdev->eps[ep_index].ring, ep_ctx->ep_info & EP_STATE_MASK, num_trbs, mem_flags); if (ret) @@ -1255,9 +1431,9 @@ static int prepare_transfer(struct xhci_hcd *xhci, (*td)->urb = urb; urb->hcpriv = (void *) (*td); /* Add this TD to the tail of the endpoint ring's TD list */ - list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list); - (*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg; - (*td)->first_trb = xdev->ep_rings[ep_index]->enqueue; + list_add_tail(&(*td)->td_list, &xdev->eps[ep_index].ring->td_list); + (*td)->start_seg = xdev->eps[ep_index].ring->enq_seg; + (*td)->first_trb = xdev->eps[ep_index].ring->enqueue; return 0; } @@ -1335,6 +1511,47 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, ring_ep_doorbell(xhci, slot_id, ep_index); } +/* + * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt + * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD + * (comprised of sg list entries) can take several service intervals to + * transmit. + */ +int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, + xhci->devs[slot_id]->out_ctx, ep_index); + int xhci_interval; + int ep_interval; + + xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info); + ep_interval = urb->interval; + /* Convert to microframes */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + ep_interval *= 8; + /* FIXME change this to a warning and a suggestion to use the new API + * to set the polling interval (once the API is added). + */ + if (xhci_interval != ep_interval) { + if (!printk_ratelimit()) + dev_dbg(&urb->dev->dev, "Driver uses different interval" + " (%d microframe%s) than xHCI " + "(%d microframe%s)\n", + ep_interval, + ep_interval == 1 ? "" : "s", + xhci_interval, + xhci_interval == 1 ? "" : "s"); + urb->interval = xhci_interval; + /* Convert back to frames for LS/FS devices */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->interval /= 8; + } + return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); +} + static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) { @@ -1350,7 +1567,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_generic_trb *start_trb; int start_cycle; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; num_trbs = count_sg_trbs_needed(xhci, urb); num_sgs = urb->num_sgs; @@ -1483,7 +1700,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->sg) return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ @@ -1594,7 +1811,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, u32 field, length_field; struct xhci_td *td; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; /* * Need to copy setup packet into setup TRB, so we can't use the setup @@ -1677,12 +1894,27 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /**** Command Ring Operations ****/ -/* Generic function for queueing a command TRB on the command ring */ -static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4) +/* Generic function for queueing a command TRB on the command ring. + * Check to make sure there's room on the command ring for one command TRB. + * Also check that there's room reserved for commands that must not fail. + * If this is a command that must not fail, meaning command_must_succeed = TRUE, + * then only check for the number of reserved spots. + * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB + * because the command event handler may want to resubmit a failed command. + */ +static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, + u32 field3, u32 field4, bool command_must_succeed) { - if (!room_on_ring(xhci, xhci->cmd_ring, 1)) { + int reserved_trbs = xhci->cmd_ring_reserved_trbs; + if (!command_must_succeed) + reserved_trbs++; + + if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) { if (!in_interrupt()) xhci_err(xhci, "ERR: No room for command on command ring\n"); + if (command_must_succeed) + xhci_err(xhci, "ERR: Reserved TRB counting for " + "unfailable commands failed.\n"); return -ENOMEM; } queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, @@ -1693,7 +1925,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 fiel /* Queue a no-op command on the command ring */ static int queue_cmd_noop(struct xhci_hcd *xhci) { - return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP)); + return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false); } /* @@ -1712,7 +1944,7 @@ void *xhci_setup_one_noop(struct xhci_hcd *xhci) int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) { return queue_command(xhci, 0, 0, 0, - TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue an address device command TRB */ @@ -1721,16 +1953,28 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, - TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id), + false); } /* Queue a configure endpoint command TRB */ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, + u32 slot_id, bool command_must_succeed) +{ + return queue_command(xhci, lower_32_bits(in_ctx_ptr), + upper_32_bits(in_ctx_ptr), 0, + TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id), + command_must_succeed); +} + +/* Queue an evaluate context command TRB */ +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, - TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), + false); } int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, @@ -1741,7 +1985,7 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, u32 type = TRB_TYPE(TRB_STOP_RING); return queue_command(xhci, 0, 0, 0, - trb_slot_id | trb_ep_index | type); + trb_slot_id | trb_ep_index | type, false); } /* Set Transfer Ring Dequeue Pointer command. @@ -1765,7 +2009,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, } return queue_command(xhci, lower_32_bits(addr) | cycle_state, upper_32_bits(addr), 0, - trb_slot_id | trb_ep_index | type); + trb_slot_id | trb_ep_index | type, false); } int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, @@ -1775,5 +2019,6 @@ int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_RESET_EP); - return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type); + return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type, + false); } |