diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 21 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 175 |
2 files changed, 196 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 7cf15ca854b..be5a05b2021 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -220,6 +220,12 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) dma_pool_destroy(xhci->segment_pool); xhci->segment_pool = NULL; xhci_dbg(xhci, "Freed segment pool\n"); + xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]); + xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]); + if (xhci->dcbaa) + pci_free_consistent(pdev, sizeof(*xhci->dcbaa), + xhci->dcbaa, xhci->dcbaa->dma); + xhci->dcbaa = NULL; xhci->page_size = 0; xhci->page_shift = 0; } @@ -263,6 +269,21 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_writel(xhci, val, &xhci->op_regs->config_reg); /* + * Section 5.4.8 - doorbell array must be + * "physically contiguous and 64-byte (cache line) aligned". + */ + xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev), + sizeof(*xhci->dcbaa), &dma); + if (!xhci->dcbaa) + goto fail; + memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); + xhci->dcbaa->dma = dma; + xhci_dbg(xhci, "// Setting device context base array address to 0x%x\n", + xhci->dcbaa->dma); + xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]); + xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]); + + /* * Initialize the ring segment pool. The ring must be a contiguous * structure comprised of TRBs. The TRBs must be 16 byte aligned, * however, the command ring segment needs 64-byte aligned segments, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ed331310f1a..f168fcac599 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -436,6 +436,180 @@ struct xhci_doorbell_array { #define DB_MASK (0xff << 8) +/** + * struct xhci_slot_ctx + * @dev_info: Route string, device speed, hub info, and last valid endpoint + * @dev_info2: Max exit latency for device number, root hub port number + * @tt_info: tt_info is used to construct split transaction tokens + * @dev_state: slot state and device address + * + * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context + * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes + * reserved at the end of the slot context for HC internal use. + */ +struct xhci_slot_ctx { + u32 dev_info; + u32 dev_info2; + u32 tt_info; + u32 dev_state; + /* offset 0x10 to 0x1f reserved for HC internal use */ + u32 reserved[4]; +} __attribute__ ((packed)); + +/* dev_info bitmasks */ +/* Route String - 0:19 */ +#define ROUTE_STRING_MASK (0xfffff) +/* Device speed - values defined by PORTSC Device Speed field - 20:23 */ +#define DEV_SPEED (0xf << 20) +/* bit 24 reserved */ +/* Is this LS/FS device connected through a HS hub? - bit 25 */ +#define DEV_MTT (0x1 << 25) +/* Set if the device is a hub - bit 26 */ +#define DEV_HUB (0x1 << 26) +/* Index of the last valid endpoint context in this device context - 27:31 */ +#define LAST_EP_MASK (0x1f << 27) +#define LAST_EP(p) ((p) << 27) + +/* dev_info2 bitmasks */ +/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */ +#define MAX_EXIT (0xffff) +/* Root hub port number that is needed to access the USB device */ +#define ROOT_HUB_PORT (0xff << 16) + +/* tt_info bitmasks */ +/* + * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub + * The Slot ID of the hub that isolates the high speed signaling from + * this low or full-speed device. '0' if attached to root hub port. + */ +#define TT_SLOT (0xff) +/* + * The number of the downstream facing port of the high-speed hub + * '0' if the device is not low or full speed. + */ +#define TT_PORT (0xff << 8) + +/* dev_state bitmasks */ +/* USB device address - assigned by the HC */ +#define DEV_ADDR (0xff) +/* bits 8:26 reserved */ +/* Slot state */ +#define SLOT_STATE (0x1f << 27) + + +/** + * struct xhci_ep_ctx + * @ep_info: endpoint state, streams, mult, and interval information. + * @ep_info2: information on endpoint type, max packet size, max burst size, + * error count, and whether the HC will force an event for all + * transactions. + * @ep_ring: 64-bit ring address. If the endpoint only defines one flow, + * this points to the endpoint transfer ring. Otherwise, it points + * to a flow context array, which has a ring pointer for each flow. + * @intr_target: + * 64-bit address of the Interrupter Target that will receive + * events from this endpoint. + * + * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context + * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes + * reserved at the end of the endpoint context for HC internal use. + */ +struct xhci_ep_ctx { + u32 ep_info; + u32 ep_info2; + /* 64-bit endpoint ring address */ + u32 ep_ring[2]; + /* 64-bit address of the interrupter target */ + u32 intr_target[2]; + /* offset 0x14 - 0x1f reserved for HC internal use */ + u32 reserved[2]; +} __attribute__ ((packed)); + +/* ep_info bitmasks */ +/* + * Endpoint State - bits 0:2 + * 0 - disabled + * 1 - running + * 2 - halted due to halt condition - ok to manipulate endpoint ring + * 3 - stopped + * 4 - TRB error + * 5-7 - reserved + */ +#define EP_STATE (0xf) +/* Mult - Max number of burtst within an interval, in EP companion desc. */ +#define EP_MULT(p) ((p & 0x3) << 8) +/* bits 10:14 are Max Primary Streams */ +/* bit 15 is Linear Stream Array */ +/* Interval - period between requests to an endpoint - 125u increments. */ +#define EP_INTERVAL (0xff << 16) + +/* ep_info2 bitmasks */ +/* + * Force Event - generate transfer events for all TRBs for this endpoint + * This will tell the HC to ignore the IOC and ISP flags (for debugging only). + */ +#define FORCE_EVENT (0x1) +#define ERROR_COUNT(p) (((p) & 0x3) << 1) +#define EP_TYPE(p) ((p) << 3) +#define ISOC_OUT_EP 1 +#define BULK_OUT_EP 2 +#define INT_OUT_EP 3 +#define CTRL_EP 4 +#define ISOC_IN_EP 5 +#define BULK_IN_EP 6 +#define INT_IN_EP 7 +/* bit 6 reserved */ +/* bit 7 is Host Initiate Disable - for disabling stream selection */ +#define MAX_BURST(p) (((p)&0xff) << 8) +#define MAX_PACKET(p) (((p)&0xffff) << 16) + + +/** + * struct xhci_device_control + * Input/Output context; see section 6.2.5. + * + * @drop_context: set the bit of the endpoint context you want to disable + * @add_context: set the bit of the endpoint context you want to enable + */ +struct xhci_device_control { + u32 drop_flags; + u32 add_flags; + u32 rsvd[6]; + struct xhci_slot_ctx slot; + struct xhci_ep_ctx ep[31]; +} __attribute__ ((packed)); + +/* drop context bitmasks */ +#define DROP_EP(x) (0x1 << x) +/* add context bitmasks */ +#define ADD_EP(x) (0x1 << x) + + +/** + * struct xhci_device_context_array + * @dev_context_ptr array of 64-bit DMA addresses for device contexts + */ +struct xhci_device_context_array { + /* 64-bit device addresses; we only write 32-bit addresses */ + u32 dev_context_ptrs[2*MAX_HC_SLOTS]; + /* private xHCD pointers */ + dma_addr_t dma; +} __attribute__ ((packed)); +/* TODO: write function to set the 64-bit device DMA address */ +/* + * TODO: change this to be dynamically sized at HC mem init time since the HC + * might not be able to handle the maximum number of devices possible. + */ + + +struct xhci_stream_ctx { + /* 64-bit stream ring address, cycle state, and stream type */ + u32 stream_ring[2]; + /* offset 0x14 - 0x1f reserved for HC internal use */ + u32 reserved[2]; +} __attribute__ ((packed)); + + struct xhci_transfer_event { /* 64-bit buffer address, or immediate data */ u32 buffer[2]; @@ -725,6 +899,7 @@ struct xhci_hcd { int msix_count; struct msix_entry *msix_entries; /* data structures */ + struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; struct xhci_ring *event_ring; struct xhci_erst erst; |