aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-hcd.c28
-rw-r--r--drivers/usb/host/ehci-hub.c27
-rw-r--r--drivers/usb/host/ehci.h1
-rw-r--r--drivers/usb/host/ohci-dbg.c9
-rw-r--r--drivers/usb/host/ohci-hcd.c14
-rw-r--r--drivers/usb/host/ohci-hub.c22
-rw-r--r--drivers/usb/host/ohci-pxa27x.c48
-rw-r--r--drivers/usb/host/ohci.h1
-rw-r--r--drivers/usb/host/uhci-hcd.c62
-rw-r--r--drivers/usb/host/uhci-hcd.h11
-rw-r--r--drivers/usb/host/uhci-hub.c11
-rw-r--r--drivers/usb/host/uhci-q.c2
12 files changed, 107 insertions, 129 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2507e898af0..b948ffd94f4 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -400,6 +400,23 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
return -EIO;
}
break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
}
/* optional debug port, normally in the first BAR */
@@ -759,12 +776,16 @@ static int ehci_resume (struct usb_hcd *hcd)
if (time_before (jiffies, ehci->next_statechange))
msleep (100);
- /* If any port is suspended, we know we can/must resume the HC. */
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
u32 status;
port--;
status = readl (&ehci->regs->port_status [port]);
- if (status & PORT_SUSPEND) {
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
down (&hcd->self.root_hub->serialize);
retval = ehci_hub_resume (hcd);
up (&hcd->self.root_hub->serialize);
@@ -1126,8 +1147,7 @@ rescan:
case QH_STATE_UNLINK: /* wait for hw to finish? */
idle_timeout:
spin_unlock_irqrestore (&ehci->lock, flags);
- set_current_state (TASK_UNINTERRUPTIBLE);
- schedule_timeout (1);
+ schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
if (list_empty (&qh->qtd_list)) {
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 36cc1f2218d..18d3f227031 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -54,7 +54,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd)
/* suspend any active/unsuspended ports, maybe allow wakeup */
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
- u32 t1 = readl (reg);
+ u32 t1 = readl (reg) & ~PORT_RWC_BITS;
u32 t2 = t1;
if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
@@ -115,7 +115,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd)
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
- temp &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
+ temp &= ~(PORT_RWC_BITS
+ | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
if (temp & PORT_SUSPEND) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
temp |= PORT_RESUME;
@@ -128,7 +129,7 @@ static int ehci_hub_resume (struct usb_hcd *hcd)
temp = readl (&ehci->regs->port_status [i]);
if ((temp & PORT_SUSPEND) == 0)
continue;
- temp &= ~PORT_RESUME;
+ temp &= ~(PORT_RWC_BITS | PORT_RESUME);
writel (temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
}
@@ -191,6 +192,7 @@ static int check_reset_complete (
// what happens if HCS_N_CC(params) == 0 ?
port_status |= PORT_OWNER;
+ port_status &= ~PORT_RWC_BITS;
writel (port_status, &ehci->regs->port_status [index]);
} else
@@ -233,7 +235,8 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
if (temp & PORT_OWNER) {
/* don't report this in GetPortStatus */
if (temp & PORT_CSC) {
- temp &= ~PORT_CSC;
+ temp &= ~PORT_RWC_BITS;
+ temp |= PORT_CSC;
writel (temp, &ehci->regs->port_status [i]);
}
continue;
@@ -343,7 +346,7 @@ static int ehci_hub_control (
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_ENABLE:
- writel (temp | PORT_PEC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_PEC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_SUSPEND:
@@ -353,7 +356,8 @@ static int ehci_hub_control (
if ((temp & PORT_PE) == 0)
goto error;
/* resume signaling for 20 msec */
- writel ((temp & ~PORT_WAKE_BITS) | PORT_RESUME,
+ temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+ writel (temp | PORT_RESUME,
&ehci->regs->port_status [wIndex]);
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (20);
@@ -364,15 +368,15 @@ static int ehci_hub_control (
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
- writel (temp & ~PORT_POWER,
+ writel (temp & ~(PORT_RWC_BITS | PORT_POWER),
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_CONNECTION:
- writel (temp | PORT_CSC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_CSC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
- writel (temp | PORT_OCC,
+ writel((temp & ~PORT_RWC_BITS) | PORT_OCC,
&ehci->regs->port_status [wIndex]);
break;
case USB_PORT_FEAT_C_RESET:
@@ -416,7 +420,7 @@ static int ehci_hub_control (
/* stop resume signaling */
temp = readl (&ehci->regs->port_status [wIndex]);
- writel (temp & ~PORT_RESUME,
+ writel (temp & ~(PORT_RWC_BITS | PORT_RESUME),
&ehci->regs->port_status [wIndex]);
retval = handshake (
&ehci->regs->port_status [wIndex],
@@ -437,7 +441,7 @@ static int ehci_hub_control (
ehci->reset_done [wIndex] = 0;
/* force reset to complete */
- writel (temp & ~PORT_RESET,
+ writel (temp & ~(PORT_RWC_BITS | PORT_RESET),
&ehci->regs->port_status [wIndex]);
/* REVISIT: some hardware needs 550+ usec to clear
* this bit; seems too long to spin routinely...
@@ -500,6 +504,7 @@ static int ehci_hub_control (
if (temp & PORT_OWNER)
break;
+ temp &= ~PORT_RWC_BITS;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if ((temp & PORT_PE) == 0
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 20c9b550097..f34a0516d35 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -263,6 +263,7 @@ struct ehci_regs {
#define PORT_PE (1<<2) /* port enable */
#define PORT_CSC (1<<1) /* connect status change */
#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
} __attribute__ ((packed));
/* Appendix C, Debug port ... intended for use with special "debug devices"
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 447f488f5d9..7924c74f958 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -228,23 +228,22 @@ ohci_dump_roothub (
char **next,
unsigned *size)
{
- u32 temp, ndp, i;
+ u32 temp, i;
temp = roothub_a (controller);
if (temp == ~(u32)0)
return;
- ndp = (temp & RH_A_NDP);
if (verbose) {
ohci_dbg_sw (controller, next, size,
- "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d\n", temp,
+ "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp,
((temp & RH_A_POTPGT) >> 24) & 0xff,
(temp & RH_A_NOCP) ? " NOCP" : "",
(temp & RH_A_OCPM) ? " OCPM" : "",
(temp & RH_A_DT) ? " DT" : "",
(temp & RH_A_NPS) ? " NPS" : "",
(temp & RH_A_PSM) ? " PSM" : "",
- ndp
+ (temp & RH_A_NDP), controller->num_ports
);
temp = roothub_b (controller);
ohci_dbg_sw (controller, next, size,
@@ -266,7 +265,7 @@ ohci_dump_roothub (
);
}
- for (i = 0; i < ndp; i++) {
+ for (i = 0; i < controller->num_ports; i++) {
temp = roothub_portstatus (controller, i);
dbg_port_sw (controller, i, temp, next, size);
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 56b43f2a0e5..67c1aa5eb1c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -382,8 +382,7 @@ sanitize:
goto sanitize;
}
spin_unlock_irqrestore (&ohci->lock, flags);
- set_current_state (TASK_UNINTERRUPTIBLE);
- schedule_timeout (1);
+ schedule_timeout_uninterruptible(1);
goto rescan;
case ED_IDLE: /* fully unlinked */
if (list_empty (&ed->td_list)) {
@@ -485,6 +484,10 @@ static int ohci_init (struct ohci_hcd *ohci)
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
+ /* Read the number of ports unless overridden */
+ if (ohci->num_ports == 0)
+ ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
+
if (ohci->hcca)
return 0;
@@ -561,10 +564,8 @@ static int ohci_run (struct ohci_hcd *ohci)
msleep(temp);
temp = roothub_a (ohci);
if (!(temp & RH_A_NPS)) {
- unsigned ports = temp & RH_A_NDP;
-
/* power down each port */
- for (temp = 0; temp < ports; temp++)
+ for (temp = 0; temp < ohci->num_ports; temp++)
ohci_writel (ohci, RH_PS_LSDA,
&ohci->regs->roothub.portstatus [temp]);
}
@@ -720,6 +721,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
if (ints & OHCI_INTR_RD) {
ohci_vdbg (ohci, "resume detect\n");
+ ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
if (hcd->state != HC_STATE_QUIESCING)
schedule_work(&ohci->rh_resume);
}
@@ -861,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
* and that if we try to turn them back on the root hub
* will respond to CSC processing.
*/
- i = roothub_a (ohci) & RH_A_NDP;
+ i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [temp]);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 83ca4549a50..ce7b28da7a1 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -184,7 +184,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
if (status != -EINPROGRESS)
return status;
- temp = roothub_a (ohci) & RH_A_NDP;
+ temp = ohci->num_ports;
enables = 0;
while (temp--) {
u32 stat = ohci_readl (ohci,
@@ -304,7 +304,7 @@ static int
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports, i, changed = 0, length = 1;
+ int i, changed = 0, length = 1;
int can_suspend = hcd->can_wakeup;
unsigned long flags;
@@ -319,9 +319,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
goto done;
}
- ports = roothub_a (ohci) & RH_A_NDP;
- if (ports > MAX_ROOT_PORTS) {
- ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports,
+ /* undocumented erratum seen on at least rev D */
+ if ((ohci->flags & OHCI_QUIRK_AMD756)
+ && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
+ ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
/* retry later; "should not happen" */
goto done;
@@ -332,13 +333,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
buf [0] = changed = 1;
else
buf [0] = 0;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
buf [1] = 0;
length++;
}
/* look at each port */
- for (i = 0; i < ports; i++) {
+ for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
@@ -395,15 +396,14 @@ ohci_hub_descriptor (
struct usb_hub_descriptor *desc
) {
u32 rh = roothub_a (ohci);
- int ports = rh & RH_A_NDP;
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
desc->bHubContrCurrent = 0;
- desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
+ desc->bNbrPorts = ohci->num_ports;
+ temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
temp = 0;
@@ -421,7 +421,7 @@ ohci_hub_descriptor (
rh = roothub_b (ohci);
memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
desc->bitmap [0] = rh & RH_B_DR;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
desc->bitmap [2] = 0xff;
} else
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e5bc1789d18..2fdb262d472 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -75,33 +75,6 @@ static int pxa27x_ohci_select_pmm( int mode )
return 0;
}
-/*
- If you select PMM_PERPORT_MODE, you should set the port power
- */
-static int pxa27x_ohci_set_port_power( int port )
-{
- if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE)
- && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) {
- UHCRHPS(port) |= 0x100;
- return 0;
- }
- return -1;
-}
-
-/*
- If you select PMM_PERPORT_MODE, you should set the port power
- */
-static int pxa27x_ohci_clear_port_power( int port )
-{
- if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE)
- && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) {
- UHCRHPS(port) |= 0x200;
- return 0;
- }
-
- return -1;
-}
-
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
@@ -130,11 +103,17 @@ static void pxa27x_start_hc(struct platform_device *dev)
Polarity Low to active low. Supply power to USB ports. */
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ pxa27x_ohci_pmm_state = PMM_PERPORT_MODE;
}
UHCHR &= ~UHCHR_SSE;
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+
+ /* Clear any OTG Pin Hold */
+ if (PSSR & PSSR_OTGPH)
+ PSSR |= PSSR_OTGPH;
}
static void pxa27x_stop_hc(struct platform_device *dev)
@@ -198,17 +177,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
pxa27x_start_hc(dev);
/* Select Power Management Mode */
- pxa27x_ohci_select_pmm( PMM_PERPORT_MODE );
-
- /* If choosing PMM_PERPORT_MODE, we should set the port power before we use it. */
- if (pxa27x_ohci_set_port_power(1) < 0)
- printk(KERN_ERR "Setting port 1 power failed.\n");
-
- if (pxa27x_ohci_clear_port_power(2) < 0)
- printk(KERN_ERR "Setting port 2 power failed.\n");
-
- if (pxa27x_ohci_clear_port_power(3) < 0)
- printk(KERN_ERR "Setting port 3 power failed.\n");
+ pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -258,6 +227,9 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
+ /* The value of NDP in roothub_a is incorrect on this hardware */
+ ohci->num_ports = 3;
+
if ((ret = ohci_init(ohci)) < 0)
return ret;
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 71cdd226286..8a9b9d9209e 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -383,6 +383,7 @@ struct ohci_hcd {
/*
* driver state
*/
+ int num_ports;
int load [NUM_INTS];
u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 0d5d2545bf0..0c024898cbe 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -97,14 +97,9 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
/* to make sure it doesn't hog all of the bandwidth */
#define DEPTH_INTERVAL 5
-static inline void restart_timer(struct uhci_hcd *uhci)
-{
- mod_timer(&uhci->stall_timer, jiffies + msecs_to_jiffies(100));
-}
-
-#include "uhci-hub.c"
#include "uhci-debug.c"
#include "uhci-q.c"
+#include "uhci-hub.c"
/*
* Make sure the controller is completely inactive, unable to
@@ -160,7 +155,6 @@ static void hc_died(struct uhci_hcd *uhci)
{
reset_hc(uhci);
uhci->hc_inaccessible = 1;
- del_timer(&uhci->stall_timer);
}
/*
@@ -287,8 +281,11 @@ __acquires(uhci->lock)
/* Enable resume-detect interrupts if they work.
* Then enter Global Suspend mode, still configured.
*/
- int_enable = (resume_detect_interrupts_are_broken(uhci) ?
- 0 : USBINTR_RESUME);
+ uhci->working_RD = 1;
+ int_enable = USBINTR_RESUME;
+ if (resume_detect_interrupts_are_broken(uhci)) {
+ uhci->working_RD = int_enable = 0;
+ }
outw(int_enable, uhci->io_addr + USBINTR);
outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
mb();
@@ -315,7 +312,6 @@ __acquires(uhci->lock)
uhci->rh_state = new_state;
uhci->is_stopped = UHCI_IS_STOPPED;
- del_timer(&uhci->stall_timer);
uhci_to_hcd(uhci)->poll_rh = !int_enable;
uhci_scan_schedule(uhci, NULL);
@@ -335,7 +331,6 @@ static void start_rh(struct uhci_hcd *uhci)
mb();
uhci->rh_state = UHCI_RH_RUNNING;
uhci_to_hcd(uhci)->poll_rh = 1;
- restart_timer(uhci);
}
static void wakeup_rh(struct uhci_hcd *uhci)
@@ -374,20 +369,6 @@ __acquires(uhci->lock)
mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
}
-static void stall_callback(unsigned long _uhci)
-{
- struct uhci_hcd *uhci = (struct uhci_hcd *) _uhci;
- unsigned long flags;
-
- spin_lock_irqsave(&uhci->lock, flags);
- uhci_scan_schedule(uhci, NULL);
- check_fsbr(uhci);
-
- if (!uhci->is_stopped)
- restart_timer(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
-}
-
static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
@@ -418,8 +399,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
"host controller halted, "
"very bad!\n");
hc_died(uhci);
- spin_unlock_irqrestore(&uhci->lock, flags);
- return IRQ_HANDLED;
+
+ /* Force a callback in case there are
+ * pending unlinks */
+ mod_timer(&hcd->rh_timer, jiffies);
}
spin_unlock_irqrestore(&uhci->lock, flags);
}
@@ -427,10 +410,11 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
if (status & USBSTS_RD)
usb_hcd_poll_rh_status(hcd);
-
- spin_lock_irqsave(&uhci->lock, flags);
- uhci_scan_schedule(uhci, regs);
- spin_unlock_irqrestore(&uhci->lock, flags);
+ else {
+ spin_lock_irqsave(&uhci->lock, flags);
+ uhci_scan_schedule(uhci, regs);
+ spin_unlock_irqrestore(&uhci->lock, flags);
+ }
return IRQ_HANDLED;
}
@@ -595,10 +579,6 @@ static int uhci_start(struct usb_hcd *hcd)
init_waitqueue_head(&uhci->waitqh);
- init_timer(&uhci->stall_timer);
- uhci->stall_timer.function = stall_callback;
- uhci->stall_timer.data = (unsigned long) uhci;
-
uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
&dma_handle, 0);
if (!uhci->fl) {
@@ -745,11 +725,11 @@ static void uhci_stop(struct usb_hcd *hcd)
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
spin_lock_irq(&uhci->lock);
- reset_hc(uhci);
+ if (!uhci->hc_inaccessible)
+ reset_hc(uhci);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);
- del_timer_sync(&uhci->stall_timer);
release_uhci(uhci);
}
@@ -811,13 +791,12 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
*/
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
uhci->hc_inaccessible = 1;
+ hcd->poll_rh = 0;
/* FIXME: Enable non-PME# remote wakeup? */
done:
spin_unlock_irq(&uhci->lock);
- if (rc == 0)
- del_timer_sync(&hcd->rh_timer);
return rc;
}
@@ -850,8 +829,11 @@ static int uhci_resume(struct usb_hcd *hcd)
spin_unlock_irq(&uhci->lock);
- if (hcd->poll_rh)
+ if (!uhci->working_RD) {
+ /* Suspended root hub needs to be polled */
+ hcd->poll_rh = 1;
usb_hcd_poll_rh_status(hcd);
+ }
return 0;
}
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index bf9c5f9b508..282f40b7588 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -345,9 +345,6 @@ enum uhci_rh_state {
/*
* This describes the full uhci information.
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs.
*/
struct uhci_hcd {
@@ -360,8 +357,6 @@ struct uhci_hcd {
struct dma_pool *qh_pool;
struct dma_pool *td_pool;
- struct usb_bus *bus;
-
struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
@@ -380,6 +375,8 @@ struct uhci_hcd {
unsigned int scan_in_progress:1; /* Schedule scan is running */
unsigned int need_rescan:1; /* Redo the schedule scan */
unsigned int hc_inaccessible:1; /* HC is suspended or dead */
+ unsigned int working_RD:1; /* Suspended root hub doesn't
+ need to be polled */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
@@ -405,9 +402,7 @@ struct uhci_hcd {
/* List of URB's awaiting completion callback */
struct list_head complete_list; /* P: uhci->lock */
- int rh_numports;
-
- struct timer_list stall_timer;
+ int rh_numports; /* Number of root-hub ports */
wait_queue_head_t waitqh; /* endpoint_disable waiters */
};
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 4eace2b19dd..a71e48a6680 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -145,15 +145,16 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
unsigned long flags;
- int status;
+ int status = 0;
spin_lock_irqsave(&uhci->lock, flags);
- if (uhci->hc_inaccessible) {
- status = 0;
- goto done;
- }
+ uhci_scan_schedule(uhci, NULL);
+ if (uhci->hc_inaccessible)
+ goto done;
+ check_fsbr(uhci);
uhci_check_ports(uhci);
+
status = get_hub_status_data(uhci, buf);
switch (uhci->rh_state) {
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index bbb36cd6ed6..ea0d168a8c6 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -33,7 +33,7 @@ static void uhci_free_pending_tds(struct uhci_hcd *uhci);
static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
{
if (uhci->is_stopped)
- mod_timer(&uhci->stall_timer, jiffies);
+ mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
}
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 19:06:18 +0000