diff options
Diffstat (limited to 'drivers/usb/otg/twl4030-usb.c')
| -rw-r--r-- | drivers/usb/otg/twl4030-usb.c | 721 |
1 files changed, 721 insertions, 0 deletions
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c new file mode 100644 index 00000000000..416e4410be0 --- /dev/null +++ b/drivers/usb/otg/twl4030-usb.c @@ -0,0 +1,721 @@ +/* + * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi <felipe.balbi@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * - HS USB ULPI mode works. + * - 3-pin mode support may be added in future. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/usb/otg.h> +#include <linux/i2c/twl4030.h> + + +/* Register defines */ + +#define VENDOR_ID_LO 0x00 +#define VENDOR_ID_HI 0x01 +#define PRODUCT_ID_LO 0x02 +#define PRODUCT_ID_HI 0x03 + +#define FUNC_CTRL 0x04 +#define FUNC_CTRL_SET 0x05 +#define FUNC_CTRL_CLR 0x06 +#define FUNC_CTRL_SUSPENDM (1 << 6) +#define FUNC_CTRL_RESET (1 << 5) +#define FUNC_CTRL_OPMODE_MASK (3 << 3) /* bits 3 and 4 */ +#define FUNC_CTRL_OPMODE_NORMAL (0 << 3) +#define FUNC_CTRL_OPMODE_NONDRIVING (1 << 3) +#define FUNC_CTRL_OPMODE_DISABLE_BIT_NRZI (2 << 3) +#define FUNC_CTRL_TERMSELECT (1 << 2) +#define FUNC_CTRL_XCVRSELECT_MASK (3 << 0) /* bits 0 and 1 */ +#define FUNC_CTRL_XCVRSELECT_HS (0 << 0) +#define FUNC_CTRL_XCVRSELECT_FS (1 << 0) +#define FUNC_CTRL_XCVRSELECT_LS (2 << 0) +#define FUNC_CTRL_XCVRSELECT_FS4LS (3 << 0) + +#define IFC_CTRL 0x07 +#define IFC_CTRL_SET 0x08 +#define IFC_CTRL_CLR 0x09 +#define IFC_CTRL_INTERFACE_PROTECT_DISABLE (1 << 7) +#define IFC_CTRL_AUTORESUME (1 << 4) +#define IFC_CTRL_CLOCKSUSPENDM (1 << 3) +#define IFC_CTRL_CARKITMODE (1 << 2) +#define IFC_CTRL_FSLSSERIALMODE_3PIN (1 << 1) + +#define TWL4030_OTG_CTRL 0x0A +#define TWL4030_OTG_CTRL_SET 0x0B +#define TWL4030_OTG_CTRL_CLR 0x0C +#define TWL4030_OTG_CTRL_DRVVBUS (1 << 5) +#define TWL4030_OTG_CTRL_CHRGVBUS (1 << 4) +#define TWL4030_OTG_CTRL_DISCHRGVBUS (1 << 3) +#define TWL4030_OTG_CTRL_DMPULLDOWN (1 << 2) +#define TWL4030_OTG_CTRL_DPPULLDOWN (1 << 1) +#define TWL4030_OTG_CTRL_IDPULLUP (1 << 0) + +#define USB_INT_EN_RISE 0x0D +#define USB_INT_EN_RISE_SET 0x0E +#define USB_INT_EN_RISE_CLR 0x0F +#define USB_INT_EN_FALL 0x10 +#define USB_INT_EN_FALL_SET 0x11 +#define USB_INT_EN_FALL_CLR 0x12 +#define USB_INT_STS 0x13 +#define USB_INT_LATCH 0x14 +#define USB_INT_IDGND (1 << 4) +#define USB_INT_SESSEND (1 << 3) +#define USB_INT_SESSVALID (1 << 2) +#define USB_INT_VBUSVALID (1 << 1) +#define USB_INT_HOSTDISCONNECT (1 << 0) + +#define CARKIT_CTRL 0x19 +#define CARKIT_CTRL_SET 0x1A +#define CARKIT_CTRL_CLR 0x1B +#define CARKIT_CTRL_MICEN (1 << 6) +#define CARKIT_CTRL_SPKRIGHTEN (1 << 5) +#define CARKIT_CTRL_SPKLEFTEN (1 << 4) +#define CARKIT_CTRL_RXDEN (1 << 3) +#define CARKIT_CTRL_TXDEN (1 << 2) +#define CARKIT_CTRL_IDGNDDRV (1 << 1) +#define CARKIT_CTRL_CARKITPWR (1 << 0) +#define CARKIT_PLS_CTRL 0x22 +#define CARKIT_PLS_CTRL_SET 0x23 +#define CARKIT_PLS_CTRL_CLR 0x24 +#define CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) +#define CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) +#define CARKIT_PLS_CTRL_RXPLSEN (1 << 1) +#define CARKIT_PLS_CTRL_TXPLSEN (1 << 0) + +#define MCPC_CTRL 0x30 +#define MCPC_CTRL_SET 0x31 +#define MCPC_CTRL_CLR 0x32 +#define MCPC_CTRL_RTSOL (1 << 7) +#define MCPC_CTRL_EXTSWR (1 << 6) +#define MCPC_CTRL_EXTSWC (1 << 5) +#define MCPC_CTRL_VOICESW (1 << 4) +#define MCPC_CTRL_OUT64K (1 << 3) +#define MCPC_CTRL_RTSCTSSW (1 << 2) +#define MCPC_CTRL_HS_UART (1 << 0) + +#define MCPC_IO_CTRL 0x33 +#define MCPC_IO_CTRL_SET 0x34 +#define MCPC_IO_CTRL_CLR 0x35 +#define MCPC_IO_CTRL_MICBIASEN (1 << 5) +#define MCPC_IO_CTRL_CTS_NPU (1 << 4) +#define MCPC_IO_CTRL_RXD_PU (1 << 3) +#define MCPC_IO_CTRL_TXDTYP (1 << 2) +#define MCPC_IO_CTRL_CTSTYP (1 << 1) +#define MCPC_IO_CTRL_RTSTYP (1 << 0) + +#define MCPC_CTRL2 0x36 +#define MCPC_CTRL2_SET 0x37 +#define MCPC_CTRL2_CLR 0x38 +#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) + +#define OTHER_FUNC_CTRL 0x80 +#define OTHER_FUNC_CTRL_SET 0x81 +#define OTHER_FUNC_CTRL_CLR 0x82 +#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) +#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) + +#define OTHER_IFC_CTRL 0x83 +#define OTHER_IFC_CTRL_SET 0x84 +#define OTHER_IFC_CTRL_CLR 0x85 +#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) +#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) +#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) +#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) +#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) +#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) + +#define OTHER_INT_EN_RISE 0x86 +#define OTHER_INT_EN_RISE_SET 0x87 +#define OTHER_INT_EN_RISE_CLR 0x88 +#define OTHER_INT_EN_FALL 0x89 +#define OTHER_INT_EN_FALL_SET 0x8A +#define OTHER_INT_EN_FALL_CLR 0x8B +#define OTHER_INT_STS 0x8C +#define OTHER_INT_LATCH 0x8D +#define OTHER_INT_VB_SESS_VLD (1 << 7) +#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ +#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ +#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ +#define OTHER_INT_MANU (1 << 1) +#define OTHER_INT_ABNORMAL_STRESS (1 << 0) + +#define ID_STATUS 0x96 +#define ID_RES_FLOAT (1 << 4) +#define ID_RES_440K (1 << 3) +#define ID_RES_200K (1 << 2) +#define ID_RES_102K (1 << 1) +#define ID_RES_GND (1 << 0) + +#define POWER_CTRL 0xAC +#define POWER_CTRL_SET 0xAD +#define POWER_CTRL_CLR 0xAE +#define POWER_CTRL_OTG_ENAB (1 << 5) + +#define OTHER_IFC_CTRL2 0xAF +#define OTHER_IFC_CTRL2_SET 0xB0 +#define OTHER_IFC_CTRL2_CLR 0xB1 +#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) +#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) +#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) + +#define REG_CTRL_EN 0xB2 +#define REG_CTRL_EN_SET 0xB3 +#define REG_CTRL_EN_CLR 0xB4 +#define REG_CTRL_ERROR 0xB5 +#define ULPI_I2C_CONFLICT_INTEN (1 << 0) + +#define OTHER_FUNC_CTRL2 0xB8 +#define OTHER_FUNC_CTRL2_SET 0xB9 +#define OTHER_FUNC_CTRL2_CLR 0xBA +#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) + +/* following registers do not have separate _clr and _set registers */ +#define VBUS_DEBOUNCE 0xC0 +#define ID_DEBOUNCE 0xC1 +#define VBAT_TIMER 0xD3 +#define PHY_PWR_CTRL 0xFD +#define PHY_PWR_PHYPWD (1 << 0) +#define PHY_CLK_CTRL 0xFE +#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) +#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) +#define REQ_PHY_DPLL_CLK (1 << 0) +#define PHY_CLK_CTRL_STS 0xFF +#define PHY_DPLL_CLK (1 << 0) + +/* In module TWL4030_MODULE_PM_MASTER */ +#define PROTECT_KEY 0x0E + +/* In module TWL4030_MODULE_PM_RECEIVER */ +#define VUSB_DEDICATED1 0x7D +#define VUSB_DEDICATED2 0x7E +#define VUSB1V5_DEV_GRP 0x71 +#define VUSB1V5_TYPE 0x72 +#define VUSB1V5_REMAP 0x73 +#define VUSB1V8_DEV_GRP 0x74 +#define VUSB1V8_TYPE 0x75 +#define VUSB1V8_REMAP 0x76 +#define VUSB3V1_DEV_GRP 0x77 +#define VUSB3V1_TYPE 0x78 +#define VUSB3V1_REMAP 0x79 + +/* In module TWL4030_MODULE_INTBR */ +#define PMBR1 0x0D +#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) + + + +enum linkstat { + USB_LINK_UNKNOWN = 0, + USB_LINK_NONE, + USB_LINK_VBUS, + USB_LINK_ID, +}; + +struct twl4030_usb { + struct otg_transceiver otg; + struct device *dev; + + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; + + int irq; + u8 linkstat; + u8 asleep; + bool irq_enabled; +}; + +/* internal define on top of container_of */ +#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg); + +/*-------------------------------------------------------------------------*/ + +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) +{ + u8 check; + + if ((twl4030_i2c_write_u8(module, data, address) >= 0) && + (twl4030_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 1, module, address, check, data); + + /* Failed once: Try again */ + if ((twl4030_i2c_write_u8(module, data, address) >= 0) && + (twl4030_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 2, module, address, check, data); + + /* Failed again: Return error */ + return -EBUSY; +} + +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address)) + +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) +{ + int ret = 0; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address); + if (ret < 0) + dev_dbg(twl->dev, + "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) +{ + u8 data; + int ret = 0; + + ret = twl4030_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_dbg(twl->dev, + "TWL4030:readb[0x%x,0x%x] Error %d\n", + module, address, ret); + + return ret; +} + +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) +{ + return twl4030_readb(twl, TWL4030_MODULE_USB, address); +} + +/*-------------------------------------------------------------------------*/ + +static inline int +twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, reg + 1, bits); +} + +static inline int +twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, reg + 2, bits); +} + +/*-------------------------------------------------------------------------*/ + +static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) +{ + int status; + int linkstat = USB_LINK_UNKNOWN; + + /* STS_HW_CONDITIONS */ + status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, 0x0f); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); + else if (status & BIT(7)) + linkstat = USB_LINK_VBUS; + else if (status & BIT(2)) + linkstat = USB_LINK_ID; + else + linkstat = USB_LINK_NONE; + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", + status, status, linkstat); + + /* REVISIT this assumes host and peripheral controllers + * are registered, and that both are active... + */ + + spin_lock_irq(&twl->lock); + twl->linkstat = linkstat; + if (linkstat == USB_LINK_ID) { + twl->otg.default_a = true; + twl->otg.state = OTG_STATE_A_IDLE; + } else { + twl->otg.default_a = false; + twl->otg.state = OTG_STATE_B_IDLE; + } + spin_unlock_irq(&twl->lock); + + return linkstat; +} + +static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) +{ + twl->usb_mode = mode; + + switch (mode) { + case T2_USB_MODE_ULPI: + twl4030_usb_clear_bits(twl, IFC_CTRL, IFC_CTRL_CARKITMODE); + twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + twl4030_usb_clear_bits(twl, FUNC_CTRL, + FUNC_CTRL_XCVRSELECT_MASK | + FUNC_CTRL_OPMODE_MASK); + break; + case -1: + /* FIXME: power on defaults */ + break; + default: + dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", + mode); + break; + }; +} + +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) +{ + unsigned long timeout; + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); + + if (val >= 0) { + if (on) { + /* enable DPLL to access PHY registers over I2C */ + val |= REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + + timeout = jiffies + HZ; + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK) + && time_before(jiffies, timeout)) + udelay(10); + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK)) + dev_err(twl->dev, "Timeout setting T2 HSUSB " + "PHY DPLL clock\n"); + } else { + /* let ULPI control the DPLL clock */ + val &= ~REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + } + } +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + u8 pwr; + + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + if (on) { + pwr &= ~PHY_PWR_PHYPWD; + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); + } else { + pwr |= PHY_PWR_PHYPWD; + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + } +} + +static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) +{ + if (twl->asleep) + return; + + twl4030_phy_power(twl, 0); + twl->asleep = 1; +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + + twl4030_phy_power(twl, 1); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); + twl->asleep = 0; +} + +static void twl4030_usb_ldo_init(struct twl4030_usb *twl) +{ + /* Enable writing to power configuration registers */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); + + /* put VUSB3V1 LDO in active state */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + + /* turn on 3.1V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + + /* turn on 1.5V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + + /* turn on 1.8V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP); + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); +} + +static ssize_t twl4030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&twl->lock, flags); + ret = sprintf(buf, "%s\n", + (twl->linkstat == USB_LINK_VBUS) ? "on" : "off"); + spin_unlock_irqrestore(&twl->lock, flags); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); + +static irqreturn_t twl4030_usb_irq(int irq, void *_twl) +{ + struct twl4030_usb *twl = _twl; + int status; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + status = twl4030_usb_linkstat(twl); + if (status != USB_LINK_UNKNOWN) { + + /* FIXME add a set_power() method so that B-devices can + * configure the charger appropriately. It's not always + * correct to consume VBUS power, and how much current to + * consume is a function of the USB configuration chosen + * by the host. + * + * REVISIT usb_gadget_vbus_connect(...) as needed, ditto + * its disconnect() sibling, when changing to/from the + * USB_LINK_VBUS state. musb_hdrc won't care until it + * starts to handle softconnect right. + */ + twl4030charger_usb_en(status == USB_LINK_VBUS); + + if (status == USB_LINK_NONE) + twl4030_phy_suspend(twl, 0); + else + twl4030_phy_resume(twl); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) +{ + struct twl4030_usb *twl = xceiv_to_twl(x); + + if (suspend) + twl4030_phy_suspend(twl, 1); + else + twl4030_phy_resume(twl); + + return 0; +} + +static int twl4030_set_peripheral(struct otg_transceiver *x, + struct usb_gadget *gadget) +{ + struct twl4030_usb *twl; + + if (!x) + return -ENODEV; + + twl = xceiv_to_twl(x); + twl->otg.gadget = gadget; + if (!gadget) + twl->otg.state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host) +{ + struct twl4030_usb *twl; + + if (!x) + return -ENODEV; + + twl = xceiv_to_twl(x); + twl->otg.host = host; + if (!host) + twl->otg.state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int __init twl4030_usb_probe(struct platform_device *pdev) +{ + struct twl4030_usb_data *pdata = pdev->dev.platform_data; + struct twl4030_usb *twl; + int status; + + if (!pdata) { + dev_dbg(&pdev->dev, "platform_data not available\n"); + return -EINVAL; + } + + twl = kzalloc(sizeof *twl, GFP_KERNEL); + if (!twl) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq = platform_get_irq(pdev, 0); + twl->otg.dev = twl->dev; + twl->otg.label = "twl4030"; + twl->otg.set_host = twl4030_set_host; + twl->otg.set_peripheral = twl4030_set_peripheral; + twl->otg.set_suspend = twl4030_set_suspend; + twl->usb_mode = pdata->usb_mode; + twl->asleep = 1; + + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + + twl4030_usb_ldo_init(twl); + otg_set_transceiver(&twl->otg); + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + /* Our job is to use irqs and status from the power module + * to keep the transceiver disabled when nothing's connected. + * + * FIXME we actually shouldn't start enabling it until the + * USB controller drivers have said they're ready, by calling + * set_host() and/or set_peripheral() ... OTG_capable boards + * need both handles, otherwise just one suffices. + */ + twl->irq_enabled = true; + status = request_irq(twl->irq, twl4030_usb_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "twl4030_usb", twl); + if (status < 0) { + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq, status); + kfree(twl); + return status; + } + + /* The IRQ handler just handles changes from the previous states + * of the ID and VBUS pins ... in probe() we must initialize that + * previous state. The easy way: fake an IRQ. + * + * REVISIT: a real IRQ might have happened already, if PREEMPT is + * enabled. Else the IRQ may not yet be configured or enabled, + * because of scheduling delays. + */ + twl4030_usb_irq(twl->irq, twl); + + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); + return 0; +} + +static int __exit twl4030_usb_remove(struct platform_device *pdev) +{ + struct twl4030_usb *twl = platform_get_drvdata(pdev); + int val; + + free_irq(twl->irq, twl); + device_remove_file(twl->dev, &dev_attr_vbus); + + /* set transceiver mode to power on defaults */ + twl4030_usb_set_mode(twl, -1); + + /* autogate 60MHz ULPI clock, + * clear dpll clock request for i2c access, + * disable 32KHz + */ + val = twl4030_usb_read(twl, PHY_CLK_CTRL); + if (val >= 0) { + val |= PHY_CLK_CTRL_CLOCKGATING_EN; + val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); + } + + /* disable complete OTG block */ + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + twl4030_phy_power(twl, 0); + + kfree(twl); + + return 0; +} + +static struct platform_driver twl4030_usb_driver = { + .probe = twl4030_usb_probe, + .remove = __exit_p(twl4030_usb_remove), + .driver = { + .name = "twl4030_usb", + .owner = THIS_MODULE, + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_usb_driver); +} +subsys_initcall(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_usb_driver); +} +module_exit(twl4030_usb_exit); + +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); +MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); +MODULE_LICENSE("GPL"); |