diff options
Diffstat (limited to 'drivers/usb/serial')
52 files changed, 7948 insertions, 7709 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9a7681b5526..8878c1767fc 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -64,14 +64,6 @@ config USB_SERIAL_AIRCABLE To compile this driver as a module, choose M here: the module will be called aircable. -config USB_SERIAL_AIRPRIME - tristate "USB AirPrime CDMA Wireless Driver" - help - Say Y here if you want to use a AirPrime CDMA Wireless PC card. - - To compile this driver as a module, choose M here: the - module will be called airprime. - config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 17a762ab676..6047f818adf 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o -obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index db6f97a93c0..79ea98c66fa 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -272,7 +272,7 @@ static void aircable_read(struct work_struct *work) * 64 bytes, to ensure I do not get throttled. * Ask USB mailing list for better aproach. */ - tty = port->tty; + tty = port->port.tty; if (!tty) { schedule_work(&priv->rx_work); @@ -378,13 +378,14 @@ static void aircable_shutdown(struct usb_serial *serial) } } -static int aircable_write_room(struct usb_serial_port *port) +static int aircable_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct aircable_private *priv = usb_get_serial_port_data(port); return serial_buf_data_avail(priv->tx_buf); } -static int aircable_write(struct usb_serial_port *port, +static int aircable_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *source, int count) { struct aircable_private *priv = usb_get_serial_port_data(port); @@ -466,7 +467,7 @@ static void aircable_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->open_count) { + if (!port->port.count) { dbg("%s - port is closed, exiting.", __func__); return; } @@ -494,7 +495,7 @@ static void aircable_read_bulk_callback(struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, urb->transfer_buffer); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { if (urb->actual_length <= 2) { /* This is an incomplete package */ @@ -528,7 +529,7 @@ static void aircable_read_bulk_callback(struct urb *urb) } /* Schedule the next read _if_ we are still open */ - if (port->open_count) { + if (port->port.count) { usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), @@ -547,8 +548,9 @@ static void aircable_read_bulk_callback(struct urb *urb) } /* Based on ftdi_sio.c throttle */ -static void aircable_throttle(struct usb_serial_port *port) +static void aircable_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct aircable_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -560,8 +562,9 @@ static void aircable_throttle(struct usb_serial_port *port) } /* Based on ftdi_sio.c unthrottle */ -static void aircable_unthrottle(struct usb_serial_port *port) +static void aircable_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct aircable_private *priv = usb_get_serial_port_data(port); int actually_throttled; unsigned long flags; diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 0798c14ce78..b3f1d1e8246 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -60,7 +60,7 @@ static int airprime_send_setup(struct usb_serial_port *port) priv = usb_get_serial_port_data(port); - if (port->tty) { + if (port->port.tty) { int val = 0; if (priv->dtr_state) val |= 0x01; @@ -94,7 +94,7 @@ static void airprime_read_bulk_callback(struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); @@ -130,7 +130,8 @@ static void airprime_write_bulk_callback(struct urb *urb) usb_serial_port_softint(port); } -static int airprime_open(struct usb_serial_port *port, struct file *filp) +static int airprime_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct airprime_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -211,7 +212,8 @@ static int airprime_open(struct usb_serial_port *port, struct file *filp) return result; } -static void airprime_close(struct usb_serial_port *port, struct file *filp) +static void airprime_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct airprime_private *priv = usb_get_serial_port_data(port); int i; @@ -237,7 +239,7 @@ static void airprime_close(struct usb_serial_port *port, struct file *filp) usb_set_serial_port_data(port, NULL); } -static int airprime_write(struct usb_serial_port *port, +static int airprime_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct airprime_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 77895c8f8f3..aec61880f36 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -158,12 +158,13 @@ cleanup: return -ENOMEM; } -static void ark3116_set_termios(struct usb_serial_port *port, +static void ark3116_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct ark3116_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = port->tty->termios; + struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; unsigned long flags; int baud; @@ -177,8 +178,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B9600 | CS8 + *termios = tty_std_termios; + termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; termios->c_ispeed = 9600; termios->c_ospeed = 9600; @@ -192,7 +193,7 @@ static void ark3116_set_termios(struct usb_serial_port *port, buf = kmalloc(1, GFP_KERNEL); if (!buf) { dbg("error kmalloc"); - *port->tty->termios = *old_termios; + *termios = *old_termios; return; } @@ -243,7 +244,7 @@ static void ark3116_set_termios(struct usb_serial_port *port, } /* set baudrate */ - baud = tty_get_baud_rate(port->tty); + baud = tty_get_baud_rate(tty); switch (baud) { case 75: @@ -262,11 +263,11 @@ static void ark3116_set_termios(struct usb_serial_port *port, case 230400: case 460800: /* Report the resulting rate back to the caller */ - tty_encode_baud_rate(port->tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); break; /* set 9600 as default (if given baudrate is invalid for example) */ default: - tty_encode_baud_rate(port->tty, 9600, 9600); + tty_encode_baud_rate(tty, 9600, 9600); case 0: baud = 9600; } @@ -317,7 +318,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, return; } -static int ark3116_open(struct usb_serial_port *port, struct file *filp) +static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -332,7 +334,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) return -ENOMEM; } - result = usb_serial_generic_open(port, filp); + result = usb_serial_generic_open(tty, port, filp); if (result) goto err_out; @@ -362,8 +364,8 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf); /* initialise termios */ - if (port->tty) - ark3116_set_termios(port, &tmp_termios); + if (tty) + ark3116_set_termios(tty, port, &tmp_termios); err_out: kfree(buf); @@ -371,9 +373,10 @@ err_out: return result; } -static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, +static int ark3116_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; @@ -403,8 +406,9 @@ static int ark3116_ioctl(struct usb_serial_port *port, struct file *file, return -ENOIOCTLCMD; } -static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file) +static int ark3116_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; char *buf; char temp; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 0a322fc53d6..2ebe06c3405 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -7,13 +7,14 @@ * This program is largely derived from work by the linux-usb group * and associated source files. Please see the usb/serial files for * individual credits and copyrights. - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * TODO: * -- Add true modem contol line query capability. Currently we track the @@ -28,7 +29,8 @@ * compressed all the differnent device entries into 1. * * 30-May-2001 gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * 08-Apr-2001 gb * - Identify version on module load. @@ -41,7 +43,7 @@ * - Added support for the old Belkin and Peracom devices. * - Made the port able to be opened multiple times. * - Added some defaults incase the line settings are things these devices - * can't support. + * can't support. * * 18-Oct-2000 William Greathouse * Released into the wild (linux-usb-devel) @@ -72,7 +74,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "belkin_sa.h" @@ -87,16 +89,19 @@ static int debug; #define DRIVER_DESC "USB Belkin Serial converter driver" /* function prototypes for a Belkin USB Serial Adapter F5U103 */ -static int belkin_sa_startup (struct usb_serial *serial); -static void belkin_sa_shutdown (struct usb_serial *serial); -static int belkin_sa_open (struct usb_serial_port *port, struct file *filp); -static void belkin_sa_close (struct usb_serial_port *port, struct file *filp); -static void belkin_sa_read_int_callback (struct urb *urb); -static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios * old); -static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void belkin_sa_break_ctl (struct usb_serial_port *port, int break_state ); -static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file); -static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); +static int belkin_sa_startup(struct usb_serial *serial); +static void belkin_sa_shutdown(struct usb_serial *serial); +static int belkin_sa_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void belkin_sa_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void belkin_sa_read_int_callback(struct urb *urb); +static void belkin_sa_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios * old); +static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); +static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file); +static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); static struct usb_device_id id_table_combined [] = { @@ -106,10 +111,10 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(GOHUBS_VID, GOHUBS_PID) }, { USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) }, { USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) }, - { } /* Terminating entry */ + { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver belkin_driver = { .name = "belkin", @@ -131,8 +136,8 @@ static struct usb_serial_driver belkin_device = { .num_ports = 1, .open = belkin_sa_open, .close = belkin_sa_close, - .read_int_callback = belkin_sa_read_int_callback, /* How we get the status info */ - .ioctl = belkin_sa_ioctl, + .read_int_callback = belkin_sa_read_int_callback, + /* How we get the status info */ .set_termios = belkin_sa_set_termios, .break_ctl = belkin_sa_break_ctl, .tiocmget = belkin_sa_tiocmget, @@ -160,12 +165,12 @@ struct belkin_sa_private { #define WDR_TIMEOUT 5000 /* default urb timeout */ /* assumes that struct usb_serial *serial is available */ -#define BSA_USB_CMD(c,v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \ +#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \ (c), BELKIN_SA_SET_REQUEST_TYPE, \ (v), 0, NULL, 0, WDR_TIMEOUT) /* do some startup allocations not currently performed by usb_serial_probe() */ -static int belkin_sa_startup (struct usb_serial *serial) +static int belkin_sa_startup(struct usb_serial *serial) { struct usb_device *dev = serial->dev; struct belkin_sa_private *priv; @@ -173,32 +178,35 @@ static int belkin_sa_startup (struct usb_serial *serial) /* allocate the private data structure */ priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL); if (!priv) - return (-1); /* error */ + return -1; /* error */ /* set initial values for control structures */ spin_lock_init(&priv->lock); priv->control_state = 0; priv->last_lsr = 0; priv->last_msr = 0; /* see comments at top of file */ - priv->bad_flow_control = (le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0; - info("bcdDevice: %04x, bfc: %d", le16_to_cpu(dev->descriptor.bcdDevice), priv->bad_flow_control); + priv->bad_flow_control = + (le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0; + info("bcdDevice: %04x, bfc: %d", + le16_to_cpu(dev->descriptor.bcdDevice), + priv->bad_flow_control); init_waitqueue_head(&serial->port[0]->write_wait); usb_set_serial_port_data(serial->port[0], priv); - - return (0); + + return 0; } -static void belkin_sa_shutdown (struct usb_serial *serial) +static void belkin_sa_shutdown(struct usb_serial *serial) { struct belkin_sa_private *priv; int i; - - dbg ("%s", __func__); + + dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) { /* My special items, the standard routines free my urbs */ priv = usb_get_serial_port_data(serial->port[i]); kfree(priv); @@ -206,7 +214,8 @@ static void belkin_sa_shutdown (struct usb_serial *serial) } -static int belkin_sa_open (struct usb_serial_port *port, struct file *filp) +static int belkin_sa_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int retval = 0; @@ -235,7 +244,8 @@ exit: } /* belkin_sa_open */ -static void belkin_sa_close (struct usb_serial_port *port, struct file *filp) +static void belkin_sa_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s port %d", __func__, port->number); @@ -246,7 +256,7 @@ static void belkin_sa_close (struct usb_serial_port *port, struct file *filp) } /* belkin_sa_close */ -static void belkin_sa_read_int_callback (struct urb *urb) +static void belkin_sa_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct belkin_sa_private *priv; @@ -272,7 +282,8 @@ static void belkin_sa_read_int_callback (struct urb *urb) goto exit; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); /* Handle known interrupt data */ /* ignore data[0] and data[1] */ @@ -280,7 +291,7 @@ static void belkin_sa_read_int_callback (struct urb *urb) priv = usb_get_serial_port_data(port); spin_lock_irqsave(&priv->lock, flags); priv->last_msr = data[BELKIN_SA_MSR_INDEX]; - + /* Record Control Line states */ if (priv->last_msr & BELKIN_SA_MSR_DSR) priv->control_state |= TIOCM_DSR; @@ -311,7 +322,7 @@ static void belkin_sa_read_int_callback (struct urb *urb) * to look in to this before committing any code. */ if (priv->last_lsr & BELKIN_SA_LSR_ERR) { - tty = port->tty; + tty = port->port.tty; /* Overrun Error */ if (priv->last_lsr & BELKIN_SA_LSR_OE) { } @@ -328,13 +339,14 @@ static void belkin_sa_read_int_callback (struct urb *urb) #endif spin_unlock_irqrestore(&priv->lock, flags); exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", + err("%s - usb_submit_urb failed with result %d", __func__, retval); } -static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void belkin_sa_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct belkin_sa_private *priv = usb_get_serial_port_data(port); @@ -347,8 +359,8 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios unsigned long control_state; int bad_flow_control; speed_t baud; - struct ktermios *termios = port->tty->termios; - + struct ktermios *termios = tty->termios; + iflag = termios->c_iflag; cflag = termios->c_cflag; @@ -359,25 +371,26 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios control_state = priv->control_state; bad_flow_control = priv->bad_flow_control; spin_unlock_irqrestore(&priv->lock, flags); - + old_iflag = old_termios->c_iflag; old_cflag = old_termios->c_cflag; /* Set the baud rate */ if ((cflag & CBAUD) != (old_cflag & CBAUD)) { /* reassert DTR and (maybe) RTS on transition from B0 */ - if( (old_cflag&CBAUD) == B0 ) { + if ((old_cflag & CBAUD) == B0) { control_state |= (TIOCM_DTR|TIOCM_RTS); if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0) err("Set DTR error"); /* don't set RTS if using hardware flow control */ if (!(old_cflag & CRTSCTS)) - if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 1) < 0) + if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST + , 1) < 0) err("Set RTS error"); } } - baud = tty_get_baud_rate(port->tty); + baud = tty_get_baud_rate(tty); if (baud) { urb_value = BELKIN_SA_BAUD(baud); /* Clip to maximum speed */ @@ -387,12 +400,13 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios baud = BELKIN_SA_BAUD(urb_value); /* Report the actual baud rate back to the caller */ - tty_encode_baud_rate(port->tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0) err("Set baudrate error"); } else { /* Disable flow control */ - if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, BELKIN_SA_FLOW_NONE) < 0) + if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, + BELKIN_SA_FLOW_NONE) < 0) err("Disable flowcontrol error"); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); @@ -403,9 +417,10 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } /* set the parity */ - if( (cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD)) ) { + if ((cflag ^ old_cflag) & (PARENB | PARODD)) { if (cflag & PARENB) - urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD : BELKIN_SA_PARITY_EVEN; + urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD + : BELKIN_SA_PARITY_EVEN; else urb_value = BELKIN_SA_PARITY_NONE; if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0) @@ -413,31 +428,40 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } /* set the number of data bits */ - if( (cflag&CSIZE) != (old_cflag&CSIZE) ) { + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { switch (cflag & CSIZE) { - case CS5: urb_value = BELKIN_SA_DATA_BITS(5); break; - case CS6: urb_value = BELKIN_SA_DATA_BITS(6); break; - case CS7: urb_value = BELKIN_SA_DATA_BITS(7); break; - case CS8: urb_value = BELKIN_SA_DATA_BITS(8); break; - default: dbg("CSIZE was not CS5-CS8, using default of 8"); - urb_value = BELKIN_SA_DATA_BITS(8); - break; + case CS5: + urb_value = BELKIN_SA_DATA_BITS(5); + break; + case CS6: + urb_value = BELKIN_SA_DATA_BITS(6); + break; + case CS7: + urb_value = BELKIN_SA_DATA_BITS(7); + break; + case CS8: + urb_value = BELKIN_SA_DATA_BITS(8); + break; + default: dbg("CSIZE was not CS5-CS8, using default of 8"); + urb_value = BELKIN_SA_DATA_BITS(8); + break; } if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0) err("Set data bits error"); } /* set the number of stop bits */ - if( (cflag&CSTOPB) != (old_cflag&CSTOPB) ) { - urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2) : BELKIN_SA_STOP_BITS(1); - if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, urb_value) < 0) + if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { + urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2) + : BELKIN_SA_STOP_BITS(1); + if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, + urb_value) < 0) err("Set stop bits error"); } /* Set flow control */ - if( (iflag&IXOFF) != (old_iflag&IXOFF) - || (iflag&IXON) != (old_iflag&IXON) - || (cflag&CRTSCTS) != (old_cflag&CRTSCTS) ) { + if (((iflag ^ old_iflag) & (IXOFF | IXON)) || + ((cflag ^ old_cflag) & CRTSCTS)) { urb_value = 0; if ((iflag & IXOFF) || (iflag & IXON)) urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON); @@ -463,8 +487,9 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } /* belkin_sa_set_termios */ -static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state ) +static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0) @@ -472,12 +497,13 @@ static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state ) } -static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file) +static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct belkin_sa_private *priv = usb_get_serial_port_data(port); unsigned long control_state; unsigned long flags; - + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); @@ -488,9 +514,10 @@ static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file) } -static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file, +static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; struct belkin_sa_private *priv = usb_get_serial_port_data(port); unsigned long control_state; @@ -498,7 +525,7 @@ static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file, int retval; int rts = 0; int dtr = 0; - + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); @@ -540,29 +567,7 @@ exit: } -static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case TIOCMIWAIT: - /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ - /* TODO */ - return( 0 ); - - case TIOCGICOUNT: - /* return count of modemline transitions */ - /* TODO */ - return 0; - - default: - dbg("belkin_sa_ioctl arg not supported - 0x%04x",cmd); - return(-ENOIOCTLCMD); - break; - } - return 0; -} /* belkin_sa_ioctl */ - - -static int __init belkin_sa_init (void) +static int __init belkin_sa_init(void) { int retval; retval = usb_serial_register(&belkin_device); @@ -582,17 +587,17 @@ failed_usb_serial_register: static void __exit belkin_sa_exit (void) { - usb_deregister (&belkin_driver); - usb_serial_deregister (&belkin_device); + usb_deregister(&belkin_driver); + usb_serial_deregister(&belkin_device); } -module_init (belkin_sa_init); -module_exit (belkin_sa_exit); +module_init(belkin_sa_init); +module_exit(belkin_sa_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h index 9116b92f462..c66a6730d38 100644 --- a/drivers/usb/serial/belkin_sa.h +++ b/drivers/usb/serial/belkin_sa.h @@ -7,13 +7,14 @@ * This program is largely derived from work by the linux-usb group * and associated source files. Please see the usb/serial files for * individual credits and copyrights. - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * 12-Mar-2001 gkh * Added GoHubs GO-COM232 device id. @@ -27,7 +28,7 @@ * adapter, so pardon any stupid mistakes. All of the information * I am using to write this driver was acquired by using a modified * UsbSnoop on Windows2000. - * + * */ #ifndef __LINUX_USB_SERIAL_BSA_H @@ -96,20 +97,20 @@ /* * It seems that the interrupt pipe is closely modelled after the - * 16550 register layout. This is probably because the adapter can + * 16550 register layout. This is probably because the adapter can * be used in a "DOS" environment to simulate a standard hardware port. */ -#define BELKIN_SA_LSR_INDEX 2 /* Line Status Register */ +#define BELKIN_SA_LSR_INDEX 2 /* Line Status Register */ #define BELKIN_SA_LSR_RDR 0x01 /* receive data ready */ #define BELKIN_SA_LSR_OE 0x02 /* overrun error */ #define BELKIN_SA_LSR_PE 0x04 /* parity error */ #define BELKIN_SA_LSR_FE 0x08 /* framing error */ #define BELKIN_SA_LSR_BI 0x10 /* break indicator */ -#define BELKIN_SA_LSR_THE 0x20 /* transmit holding register empty */ +#define BELKIN_SA_LSR_THE 0x20 /* tx holding register empty */ #define BELKIN_SA_LSR_TE 0x40 /* transmit register empty */ #define BELKIN_SA_LSR_ERR 0x80 /* OE | PE | FE | BI */ -#define BELKIN_SA_MSR_INDEX 3 /* Modem Status Register */ +#define BELKIN_SA_MSR_INDEX 3 /* Modem Status Register */ #define BELKIN_SA_MSR_DCTS 0x01 /* Delta CTS */ #define BELKIN_SA_MSR_DDSR 0x02 /* Delta DSR */ #define BELKIN_SA_MSR_DRI 0x04 /* Delta RI */ diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 0b14aea8ebd..83bbb5bca2e 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -15,7 +15,8 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -static int usb_serial_device_match (struct device *dev, struct device_driver *drv) +static int usb_serial_device_match(struct device *dev, + struct device_driver *drv) { struct usb_serial_driver *driver; const struct usb_serial_port *port; @@ -46,7 +47,7 @@ static ssize_t show_port_number(struct device *dev, static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL); -static int usb_serial_device_probe (struct device *dev) +static int usb_serial_device_probe(struct device *dev) { struct usb_serial_driver *driver; struct usb_serial_port *port; @@ -66,7 +67,7 @@ static int usb_serial_device_probe (struct device *dev) retval = -EIO; goto exit; } - retval = driver->port_probe (port); + retval = driver->port_probe(port); module_put(driver->driver.owner); if (retval) goto exit; @@ -77,8 +78,8 @@ static int usb_serial_device_probe (struct device *dev) goto exit; minor = port->number; - tty_register_device (usb_serial_tty_driver, minor, dev); - dev_info(&port->serial->dev->dev, + tty_register_device(usb_serial_tty_driver, minor, dev); + dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", driver->description, minor); @@ -86,7 +87,7 @@ exit: return retval; } -static int usb_serial_device_remove (struct device *dev) +static int usb_serial_device_remove(struct device *dev) { struct usb_serial_driver *driver; struct usb_serial_port *port; @@ -94,9 +95,8 @@ static int usb_serial_device_remove (struct device *dev) int minor; port = to_usb_serial_port(dev); - if (!port) { + if (!port) return -ENODEV; - } device_remove_file(&port->dev, &dev_attr_port_number); @@ -107,12 +107,12 @@ static int usb_serial_device_remove (struct device *dev) retval = -EIO; goto exit; } - retval = driver->port_remove (port); + retval = driver->port_remove(port); module_put(driver->driver.owner); } exit: minor = port->number; - tty_unregister_device (usb_serial_tty_driver, minor); + tty_unregister_device(usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 1f7c86bd829..f61e3ca6430 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -232,7 +232,8 @@ error: kfree(priv); } /* open this device, set default parameters */ -static int ch341_open(struct usb_serial_port *port, struct file *filp) +static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct usb_serial *serial = port->serial; struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]); @@ -256,7 +257,7 @@ static int ch341_open(struct usb_serial_port *port, struct file *filp) if (r) goto out; - r = usb_serial_generic_open(port, filp); + r = usb_serial_generic_open(tty, port, filp); out: return r; } @@ -264,11 +265,10 @@ out: return r; /* Old_termios contains the original termios settings and * tty->termios contains the new setting to be used. */ -static void ch341_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void ch341_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct ch341_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned baud_rate; dbg("ch341_set_termios()"); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 201184c3fb8..7b74238ad1c 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -6,7 +6,7 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. - * + * * Thanks to Randy Dunlap for the original version of this code. * */ @@ -67,7 +67,7 @@ static int usb_console_setup(struct console *co, char *options) struct tty_struct *tty = NULL; struct ktermios *termios = NULL, dummy; - dbg ("%s", __func__); + dbg("%s", __func__); if (options) { baud = simple_strtoul(options, NULL, 10); @@ -81,55 +81,27 @@ static int usb_console_setup(struct console *co, char *options) if (*s) doflow = (*s++ == 'r'); } + + /* Sane default */ + if (baud == 0) + baud = 9600; - /* build a cflag setting */ - switch (baud) { - case 1200: - cflag |= B1200; - break; - case 2400: - cflag |= B2400; - break; - case 4800: - cflag |= B4800; - break; - case 19200: - cflag |= B19200; - break; - case 38400: - cflag |= B38400; - break; - case 57600: - cflag |= B57600; - break; - case 115200: - cflag |= B115200; - break; - case 9600: - default: - cflag |= B9600; - /* - * Set this to a sane value to prevent a divide error - */ - baud = 9600; - break; - } switch (bits) { - case 7: - cflag |= CS7; - break; - default: - case 8: - cflag |= CS8; - break; + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; } switch (parity) { - case 'o': case 'O': - cflag |= PARODD; - break; - case 'e': case 'E': - cflag |= PARENB; - break; + case 'o': case 'O': + cflag |= PARODD; + break; + case 'e': case 'E': + cflag |= PARENB; + break; } co->cflag = cflag; @@ -140,17 +112,17 @@ static int usb_console_setup(struct console *co, char *options) serial = usb_serial_get_by_index(co->index); if (serial == NULL) { /* no device is connected yet, sorry :( */ - err ("No USB device connected to ttyUSB%i", co->index); + err("No USB device connected to ttyUSB%i", co->index); return -ENODEV; } port = serial->port[0]; - port->tty = NULL; + port->port.tty = NULL; info->port = port; - - ++port->open_count; - if (port->open_count == 1) { + + ++port->port.count; + if (port->port.count == 1) { if (serial->type->set_termios) { /* * allocate a fake tty so the driver can initialize @@ -171,15 +143,15 @@ static int usb_console_setup(struct console *co, char *options) } memset(&dummy, 0, sizeof(struct ktermios)); tty->termios = termios; - port->tty = tty; + port->port.tty = tty; } - /* only call the device specific open if this + /* only call the device specific open if this * is the first time the port is opened */ if (serial->type->open) - retval = serial->type->open(port, NULL); + retval = serial->type->open(NULL, port, NULL); else - retval = usb_serial_generic_open(port, NULL); + retval = usb_serial_generic_open(NULL, port, NULL); if (retval) { err("could not open USB console port"); @@ -188,9 +160,10 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { termios->c_cflag = cflag; - serial->type->set_termios(port, &dummy); + tty_termios_encode_baud_rate(termios, baud, baud); + serial->type->set_termios(NULL, port, &dummy); - port->tty = NULL; + port->port.tty = NULL; kfree(termios); kfree(tty); } @@ -203,15 +176,16 @@ out: return retval; free_termios: kfree(termios); - port->tty = NULL; + port->port.tty = NULL; free_tty: kfree(tty); reset_open_count: - port->open_count = 0; + port->port.count = 0; goto out; } -static void usb_console_write(struct console *co, const char *buf, unsigned count) +static void usb_console_write(struct console *co, + const char *buf, unsigned count) { static struct usbcons_info *info = &usbcons_info; struct usb_serial_port *port = info->port; @@ -227,8 +201,8 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - if (!port->open_count) { - dbg ("%s - port not opened", __func__); + if (!port->port.count) { + dbg("%s - port not opened", __func__); return; } @@ -236,26 +210,29 @@ static void usb_console_write(struct console *co, const char *buf, unsigned coun unsigned int i; unsigned int lf; /* search for LF so we can insert CR if necessary */ - for (i=0, lf=0 ; i < count ; i++) { + for (i = 0, lf = 0 ; i < count ; i++) { if (*(buf + i) == 10) { lf = 1; i++; break; } } - /* pass on to the driver specific version of this function if it is available */ + /* pass on to the driver specific version of this function if + it is available */ if (serial->type->write) - retval = serial->type->write(port, buf, i); + retval = serial->type->write(NULL, port, buf, i); else - retval = usb_serial_generic_write(port, buf, i); + retval = usb_serial_generic_write(NULL, port, buf, i); dbg("%s - return value : %d", __func__, retval); if (lf) { /* append CR after LF */ unsigned char cr = 13; if (serial->type->write) - retval = serial->type->write(port, &cr, 1); + retval = serial->type->write(NULL, + port, &cr, 1); else - retval = usb_serial_generic_write(port, &cr, 1); + retval = usb_serial_generic_write(NULL, + port, &cr, 1); dbg("%s - return value : %d", __func__, retval); } buf += i; @@ -273,18 +250,19 @@ static struct console usbcons = { void usb_serial_console_disconnect(struct usb_serial *serial) { - if (serial && serial->port && serial->port[0] && serial->port[0] == usbcons_info.port) { + if (serial && serial->port && serial->port[0] + && serial->port[0] == usbcons_info.port) { usb_serial_console_exit(); usb_serial_put(serial); } } -void usb_serial_console_init (int serial_debug, int minor) +void usb_serial_console_init(int serial_debug, int minor) { debug = serial_debug; if (minor == 0) { - /* + /* * Call register_console() if this is the first device plugged * in. If we call it earlier, then the callback to * console_setup() will fail, as there is not a device seen by @@ -293,21 +271,21 @@ void usb_serial_console_init (int serial_debug, int minor) /* * Register console. * NOTES: - * console_setup() is called (back) immediately (from register_console). - * console_write() is called immediately from register_console iff - * CON_PRINTBUFFER is set in flags. + * console_setup() is called (back) immediately (from + * register_console). console_write() is called immediately + * from register_console iff CON_PRINTBUFFER is set in flags. */ - dbg ("registering the USB serial console."); + dbg("registering the USB serial console."); register_console(&usbcons); } } -void usb_serial_console_exit (void) +void usb_serial_console_exit(void) { if (usbcons_info.port) { unregister_console(&usbcons); - if (usbcons_info.port->open_count) - usbcons_info.port->open_count--; + if (usbcons_info.port->port.count) + usbcons_info.port->port.count--; usbcons_info.port = NULL; } } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index f5b57b196c5..442cba69cce 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -25,7 +25,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/usb.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb/serial.h> /* @@ -37,17 +37,20 @@ /* * Function Prototypes */ -static int cp2101_open(struct usb_serial_port*, struct file*); -static void cp2101_cleanup(struct usb_serial_port*); -static void cp2101_close(struct usb_serial_port*, struct file*); -static void cp2101_get_termios(struct usb_serial_port*); -static void cp2101_set_termios(struct usb_serial_port*, struct ktermios*); -static int cp2101_tiocmget (struct usb_serial_port *, struct file *); -static int cp2101_tiocmset (struct usb_serial_port *, struct file *, +static int cp2101_open(struct tty_struct *, struct usb_serial_port *, + struct file *); +static void cp2101_cleanup(struct usb_serial_port *); +static void cp2101_close(struct tty_struct *, struct usb_serial_port *, + struct file*); +static void cp2101_get_termios(struct tty_struct *); +static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, + struct ktermios*); +static int cp2101_tiocmget(struct tty_struct *, struct file *); +static int cp2101_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static void cp2101_break_ctl(struct usb_serial_port*, int); -static int cp2101_startup (struct usb_serial *); -static void cp2101_shutdown(struct usb_serial*); +static void cp2101_break_ctl(struct tty_struct *, int); +static int cp2101_startup(struct usb_serial *); +static void cp2101_shutdown(struct usb_serial *); static int debug; @@ -93,7 +96,7 @@ static struct usb_device_id id_table [] = { { } /* Terminating Entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver cp2101_driver = { .name = "cp2101", @@ -182,7 +185,7 @@ static struct usb_serial_driver cp2101_device = { * 'data' is a pointer to a pre-allocated array of integers large * enough to hold 'size' bytes (with 4 bytes to each integer) */ -static int cp2101_get_config(struct usb_serial_port* port, u8 request, +static int cp2101_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -202,12 +205,12 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, request++; /* Issue the request, attempting to read 'size' bytes */ - result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0), + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, 0, buf, size, 300); /* Convert data into an array of integers */ - for (i=0; i<length; i++) + for (i = 0; i < length; i++) data[i] = le32_to_cpu(buf[i]); kfree(buf); @@ -228,7 +231,7 @@ static int cp2101_get_config(struct usb_serial_port* port, u8 request, * Values less than 16 bits wide are sent directly * 'size' is specified in bytes. */ -static int cp2101_set_config(struct usb_serial_port* port, u8 request, +static int cp2101_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -250,12 +253,12 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, buf[i] = cpu_to_le32(data[i]); if (size > 2) { - result = usb_control_msg (serial->dev, + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_DEVICE, 0x0000, 0, buf, size, 300); } else { - result = usb_control_msg (serial->dev, + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_DEVICE, data[0], 0, NULL, 0, 300); @@ -271,7 +274,7 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, } /* Single data value */ - result = usb_control_msg (serial->dev, + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_DEVICE, data[0], 0, NULL, 0, 300); @@ -283,13 +286,14 @@ static int cp2101_set_config(struct usb_serial_port* port, u8 request, * Convenience function for calling cp2101_set_config on single data values * without requiring an integer pointer */ -static inline int cp2101_set_config_single(struct usb_serial_port* port, +static inline int cp2101_set_config_single(struct usb_serial_port *port, u8 request, unsigned int data) { return cp2101_set_config(port, request, &data, 2); } -static int cp2101_open (struct usb_serial_port *port, struct file *filp) +static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct usb_serial *serial = port->serial; int result; @@ -303,7 +307,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) } /* Start reading from the device */ - usb_fill_bulk_urb (port->read_urb, serial->dev, + usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -318,15 +322,15 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) } /* Configure the termios structure */ - cp2101_get_termios(port); + cp2101_get_termios(tty); /* Set the DTR and RTS pins low */ - cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0); + cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0); return 0; } -static void cp2101_cleanup (struct usb_serial_port *port) +static void cp2101_cleanup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -341,7 +345,8 @@ static void cp2101_cleanup (struct usb_serial_port *port) } } -static void cp2101_close (struct usb_serial_port *port, struct file * filp) +static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { dbg("%s - port %d", __func__, port->number); @@ -362,19 +367,15 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp) * from the device, corrects any unsupported values, and configures the * termios structure to reflect the state of the device */ -static void cp2101_get_termios (struct usb_serial_port *port) +static void cp2101_get_termios (struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned int cflag, modem_ctl[4]; - int baud; - int bits; + unsigned int baud; + unsigned int bits; dbg("%s - port %d", __func__, port->number); - if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __func__); - return; - } - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); /* Convert to baudrate */ if (baud) @@ -382,104 +383,102 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - baud rate = %d", __func__, baud); - tty_encode_baud_rate(port->tty, baud, baud); - cflag = port->tty->termios->c_cflag; + tty_encode_baud_rate(tty, baud, baud); + cflag = tty->termios->c_cflag; cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; - switch(bits & BITS_DATA_MASK) { - case BITS_DATA_5: - dbg("%s - data bits = 5", __func__); - cflag |= CS5; - break; - case BITS_DATA_6: - dbg("%s - data bits = 6", __func__); - cflag |= CS6; - break; - case BITS_DATA_7: - dbg("%s - data bits = 7", __func__); - cflag |= CS7; - break; - case BITS_DATA_8: - dbg("%s - data bits = 8", __func__); - cflag |= CS8; - break; - case BITS_DATA_9: - dbg("%s - data bits = 9 (not supported, " - "using 8 data bits)", __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - default: - dbg("%s - Unknown number of data bits, " - "using 8", __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; + switch (bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __func__); + cflag |= CS5; + break; + case BITS_DATA_6: + dbg("%s - data bits = 6", __func__); + cflag |= CS6; + break; + case BITS_DATA_7: + dbg("%s - data bits = 7", __func__); + cflag |= CS7; + break; + case BITS_DATA_8: + dbg("%s - data bits = 8", __func__); + cflag |= CS8; + break; + case BITS_DATA_9: + dbg("%s - data bits = 9 (not supported, using 8 data bits)", + __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + default: + dbg("%s - Unknown number of data bits, using 8", __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; } - switch(bits & BITS_PARITY_MASK) { - case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __func__); - cflag &= ~PARENB; - break; - case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __func__); - cflag |= (PARENB|PARODD); - break; - case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __func__); - cflag &= ~PARODD; - cflag |= PARENB; - break; - case BITS_PARITY_MARK: - dbg("%s - parity = MARK (not supported, " - "disabling parity)", __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - case BITS_PARITY_SPACE: - dbg("%s - parity = SPACE (not supported, " - "disabling parity)", __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - default: - dbg("%s - Unknown parity mode, " - "disabling parity", __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; + switch (bits & BITS_PARITY_MASK) { + case BITS_PARITY_NONE: + dbg("%s - parity = NONE", __func__); + cflag &= ~PARENB; + break; + case BITS_PARITY_ODD: + dbg("%s - parity = ODD", __func__); + cflag |= (PARENB|PARODD); + break; + case BITS_PARITY_EVEN: + dbg("%s - parity = EVEN", __func__); + cflag &= ~PARODD; + cflag |= PARENB; + break; + case BITS_PARITY_MARK: + dbg("%s - parity = MARK (not supported, disabling parity)", + __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + case BITS_PARITY_SPACE: + dbg("%s - parity = SPACE (not supported, disabling parity)", + __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + default: + dbg("%s - Unknown parity mode, disabling parity", __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; } cflag &= ~CSTOPB; - switch(bits & BITS_STOP_MASK) { - case BITS_STOP_1: - dbg("%s - stop bits = 1", __func__); - break; - case BITS_STOP_1_5: - dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit)", __func__); - bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - case BITS_STOP_2: - dbg("%s - stop bits = 2", __func__); - cflag |= CSTOPB; - break; - default: - dbg("%s - Unknown number of stop bits, " - "using 1 stop bit", __func__); - bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; + switch (bits & BITS_STOP_MASK) { + case BITS_STOP_1: + dbg("%s - stop bits = 1", __func__); + break; + case BITS_STOP_1_5: + dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", + __func__); + bits &= ~BITS_STOP_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + case BITS_STOP_2: + dbg("%s - stop bits = 2", __func__); + cflag |= CSTOPB; + break; + default: + dbg("%s - Unknown number of stop bits, using 1 stop bit", + __func__); + bits &= ~BITS_STOP_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; } cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); @@ -491,55 +490,53 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag &= ~CRTSCTS; } - port->tty->termios->c_cflag = cflag; + tty->termios->c_cflag = cflag; } -static void cp2101_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void cp2101_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - int baud=0, bits; + unsigned int baud = 0, bits; unsigned int modem_ctl[4]; dbg("%s - port %d", __func__, port->number); - if (!port->tty || !port->tty->termios) { - dbg("%s - no tty structures", __func__); + if (!tty) return; - } - port->tty->termios->c_cflag &= ~CMSPAR; - cflag = port->tty->termios->c_cflag; + tty->termios->c_cflag &= ~CMSPAR; + cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = tty_get_baud_rate(port->tty); + baud = tty_get_baud_rate(tty); /* If the baud rate is to be updated*/ if (baud != tty_termios_baud_rate(old_termios)) { switch (baud) { - case 0: - case 600: - case 1200: - case 1800: - case 2400: - case 4800: - case 7200: - case 9600: - case 14400: - case 19200: - case 28800: - case 38400: - case 55854: - case 57600: - case 115200: - case 127117: - case 230400: - case 460800: - case 921600: - case 3686400: - break; - default: - baud = 9600; - break; + case 0: + case 600: + case 1200: + case 1800: + case 2400: + case 4800: + case 7200: + case 9600: + case 14400: + case 19200: + case 28800: + case 38400: + case 55854: + case 57600: + case 115200: + case 127117: + case 230400: + case 460800: + case 921600: + case 3686400: + break; + default: + baud = 9600; + break; } if (baud) { @@ -554,35 +551,35 @@ static void cp2101_set_termios (struct usb_serial_port *port, } } /* Report back the resulting baud rate */ - tty_encode_baud_rate(port->tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { - case CS5: - bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __func__); - break; - case CS6: - bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __func__); - break; - case CS7: - bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __func__); - break; - case CS8: - bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __func__); - break; - /*case CS9: - bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __func__); - break;*/ - default: - dev_err(&port->dev, "cp2101 driver does not " + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __func__); + break; + case CS6: + bits |= BITS_DATA_6; + dbg("%s - data bits = 6", __func__); + break; + case CS7: + bits |= BITS_DATA_7; + dbg("%s - data bits = 7", __func__); + break; + case CS8: + bits |= BITS_DATA_8; + dbg("%s - data bits = 8", __func__); + break; + /*case CS9: + bits |= BITS_DATA_9; + dbg("%s - data bits = 9", __func__); + break;*/ + default: + dev_err(&port->dev, "cp2101 driver does not " "support the number of bits requested," " using 8 bit mode\n"); bits |= BITS_DATA_8; @@ -651,10 +648,11 @@ static void cp2101_set_termios (struct usb_serial_port *port, } -static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, +static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - int control = 0; + struct usb_serial_port *port = tty->driver_data; + unsigned int control = 0; dbg("%s - port %d", __func__, port->number); @@ -681,9 +679,11 @@ static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, } -static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) +static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) { - int control, result; + struct usb_serial_port *port = tty->driver_data; + unsigned int control; + int result; dbg("%s - port %d", __func__, port->number); @@ -701,9 +701,10 @@ static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) return result; } -static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) +static void cp2101_break_ctl (struct tty_struct *tty, int break_state) { - int state; + struct usb_serial_port *port = tty->driver_data; + unsigned int state; dbg("%s - port %d", __func__, port->number); if (break_state == 0) @@ -711,30 +712,29 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) else state = BREAK_ON; dbg("%s - turning break %s", __func__, - state==BREAK_OFF ? "off" : "on"); + state == BREAK_OFF ? "off" : "on"); cp2101_set_config(port, CP2101_BREAK, &state, 2); } -static int cp2101_startup (struct usb_serial *serial) +static int cp2101_startup(struct usb_serial *serial) { /* CP2101 buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } -static void cp2101_shutdown (struct usb_serial *serial) +static void cp2101_shutdown(struct usb_serial *serial) { int i; dbg("%s", __func__); /* Stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) cp2101_cleanup(serial->port[i]); - } } -static int __init cp2101_init (void) +static int __init cp2101_init(void) { int retval; @@ -754,10 +754,10 @@ static int __init cp2101_init (void) return 0; } -static void __exit cp2101_exit (void) +static void __exit cp2101_exit(void) { - usb_deregister (&cp2101_driver); - usb_serial_deregister (&cp2101_device); + usb_deregister(&cp2101_driver); + usb_serial_deregister(&cp2101_device); } module_init(cp2101_init); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index c164e2cf275..b4d72351cb9 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -37,7 +37,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -57,22 +57,25 @@ static int debug; #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static int cyberjack_startup (struct usb_serial *serial); -static void cyberjack_shutdown (struct usb_serial *serial); -static int cyberjack_open (struct usb_serial_port *port, struct file *filp); -static void cyberjack_close (struct usb_serial_port *port, struct file *filp); -static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int cyberjack_write_room( struct usb_serial_port *port ); -static void cyberjack_read_int_callback (struct urb *urb); -static void cyberjack_read_bulk_callback (struct urb *urb); -static void cyberjack_write_bulk_callback (struct urb *urb); +static int cyberjack_startup(struct usb_serial *serial); +static void cyberjack_shutdown(struct usb_serial *serial); +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void cyberjack_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +static int cyberjack_write_room(struct tty_struct *tty); +static void cyberjack_read_int_callback(struct urb *urb); +static void cyberjack_read_bulk_callback(struct urb *urb); +static void cyberjack_write_bulk_callback(struct urb *urb); static struct usb_device_id id_table [] = { { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver cyberjack_driver = { .name = "cyberjack", @@ -111,7 +114,7 @@ struct cyberjack_private { }; /* do some startup allocations not currently performed by usb_serial_probe() */ -static int cyberjack_startup (struct usb_serial *serial) +static int cyberjack_startup(struct usb_serial *serial) { struct cyberjack_private *priv; int i; @@ -135,20 +138,20 @@ static int cyberjack_startup (struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { int result; serial->port[i]->interrupt_in_urb->dev = serial->dev; - result = usb_submit_urb(serial->port[i]->interrupt_in_urb, + result = usb_submit_urb(serial->port[i]->interrupt_in_urb, GFP_KERNEL); if (result) err(" usb_submit_urb(read int) failed"); dbg("%s - usb_submit_urb(int urb)", __func__); } - return( 0 ); + return 0; } -static void cyberjack_shutdown (struct usb_serial *serial) +static void cyberjack_shutdown(struct usb_serial *serial) { int i; - + dbg("%s", __func__); for (i = 0; i < serial->num_ports; ++i) { @@ -158,8 +161,9 @@ static void cyberjack_shutdown (struct usb_serial *serial) usb_set_serial_port_data(serial->port[i], NULL); } } - -static int cyberjack_open (struct usb_serial_port *port, struct file *filp) + +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct cyberjack_private *priv; unsigned long flags; @@ -167,14 +171,15 @@ static int cyberjack_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); - dbg("%s - usb_clear_halt", __func__ ); + dbg("%s - usb_clear_halt", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); /* force low_latency on so that our tty_push actually forces * the data through, otherwise it is scheduled, and with high * data rates (like with OHCI) data can get lost. */ - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; priv = usb_get_serial_port_data(port); spin_lock_irqsave(&priv->lock, flags); @@ -186,7 +191,8 @@ static int cyberjack_open (struct usb_serial_port *port, struct file *filp) return result; } -static void cyberjack_close (struct usb_serial_port *port, struct file *filp) +static void cyberjack_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __func__, port->number); @@ -197,7 +203,8 @@ static void cyberjack_close (struct usb_serial_port *port, struct file *filp) } } -static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct cyberjack_private *priv = usb_get_serial_port_data(port); @@ -223,7 +230,7 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b spin_lock_irqsave(&priv->lock, flags); - if( (count+priv->wrfilled) > sizeof(priv->wrbuf) ) { + if (count+priv->wrfilled > sizeof(priv->wrbuf)) { /* To much data for buffer. Reset buffer. */ priv->wrfilled = 0; port->write_urb_busy = 0; @@ -232,42 +239,43 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b } /* Copy data */ - memcpy (priv->wrbuf+priv->wrfilled, buf, count); + memcpy(priv->wrbuf + priv->wrfilled, buf, count); usb_serial_debug_data(debug, &port->dev, __func__, count, - priv->wrbuf+priv->wrfilled); + priv->wrbuf + priv->wrfilled); priv->wrfilled += count; - if( priv->wrfilled >= 3 ) { + if (priv->wrfilled >= 3) { wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; dbg("%s - expected data: %d", __func__, wrexpected); - } else { + } else wrexpected = sizeof(priv->wrbuf); - } - if( priv->wrfilled >= wrexpected ) { + if (priv->wrfilled >= wrexpected) { /* We have enough data to begin transmission */ int length; dbg("%s - transmitting data (frame 1)", __func__); - length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected; + length = (wrexpected > port->bulk_out_size) ? + port->bulk_out_size : wrexpected; - memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length ); - priv->wrsent=length; + memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length); + priv->wrsent = length; /* set up our urb */ - usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_fill_bulk_urb(port->write_urb, serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, length, - ((serial->type->write_bulk_callback) ? - serial->type->write_bulk_callback : - cyberjack_write_bulk_callback), + ((serial->type->write_bulk_callback) ? + serial->type->write_bulk_callback : + cyberjack_write_bulk_callback), port); /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; priv->wrsent = 0; @@ -276,12 +284,12 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b return 0; } - dbg("%s - priv->wrsent=%d", __func__,priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled); + dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); + dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); - if( priv->wrsent>=priv->wrfilled ) { + if (priv->wrsent >= priv->wrfilled) { dbg("%s - buffer cleaned", __func__); - memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; } @@ -289,16 +297,16 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b spin_unlock_irqrestore(&priv->lock, flags); - return (count); -} + return count; +} -static int cyberjack_write_room( struct usb_serial_port *port ) +static int cyberjack_write_room(struct tty_struct *tty) { /* FIXME: .... */ return CYBERJACK_LOCAL_BUF_SIZE; } -static void cyberjack_read_int_callback( struct urb *urb ) +static void cyberjack_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); @@ -312,10 +320,11 @@ static void cyberjack_read_int_callback( struct urb *urb ) if (status) return; - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); /* React only to interrupts signaling a bulk_in transfer */ - if( (urb->actual_length == 4) && (data[0] == 0x01) ) { + if (urb->actual_length == 4 && data[0] == 0x01) { short old_rdtodo; /* This is a announcement of coming bulk_ins. */ @@ -325,8 +334,8 @@ static void cyberjack_read_int_callback( struct urb *urb ) old_rdtodo = priv->rdtodo; - if( (old_rdtodo+size)<(old_rdtodo) ) { - dbg( "To many bulk_in urbs to do." ); + if (old_rdtodo + size < old_rdtodo) { + dbg("To many bulk_in urbs to do."); spin_unlock(&priv->lock); goto resubmit; } @@ -338,10 +347,10 @@ static void cyberjack_read_int_callback( struct urb *urb ) spin_unlock(&priv->lock); - if( !old_rdtodo ) { + if (!old_rdtodo) { port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if( result ) + if (result) err("%s - failed resubmitting read urb, error %d", __func__, result); dbg("%s - usb_submit_urb(read urb)", __func__); } @@ -355,7 +364,7 @@ resubmit: dbg("%s - usb_submit_urb(int urb)", __func__); } -static void cyberjack_read_bulk_callback (struct urb *urb) +static void cyberjack_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); @@ -367,14 +376,15 @@ static void cyberjack_read_bulk_callback (struct urb *urb) dbg("%s - port %d", __func__, port->number); - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); if (status) { dbg("%s - nonzero read bulk status received: %d", __func__, status); return; } - tty = port->tty; + tty = port->port.tty; if (!tty) { dbg("%s - ignoring since device not open\n", __func__); return; @@ -382,15 +392,16 @@ static void cyberjack_read_bulk_callback (struct urb *urb) if (urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(tty); } spin_lock(&priv->lock); /* Reduce urbs to do by one. */ - priv->rdtodo-=urb->actual_length; + priv->rdtodo -= urb->actual_length; /* Just to be sure */ - if ( priv->rdtodo<0 ) priv->rdtodo = 0; + if (priv->rdtodo < 0) + priv->rdtodo = 0; todo = priv->rdtodo; spin_unlock(&priv->lock); @@ -398,16 +409,17 @@ static void cyberjack_read_bulk_callback (struct urb *urb) dbg("%s - rdtodo: %d", __func__, todo); /* Continue to read if we have still urbs to do. */ - if( todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) { + if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) { port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); dbg("%s - usb_submit_urb(read urb)", __func__); } } -static void cyberjack_write_bulk_callback (struct urb *urb) +static void cyberjack_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cyberjack_private *priv = usb_get_serial_port_data(port); @@ -425,7 +437,7 @@ static void cyberjack_write_bulk_callback (struct urb *urb) spin_lock(&priv->lock); /* only do something if we have more data to send */ - if( priv->wrfilled ) { + if (priv->wrfilled) { int length, blksize, result; dbg("%s - transmitting data (frame n)", __func__); @@ -433,37 +445,39 @@ static void cyberjack_write_bulk_callback (struct urb *urb) length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? port->bulk_out_size : (priv->wrfilled - priv->wrsent); - memcpy (port->write_urb->transfer_buffer, priv->wrbuf + priv->wrsent, - length ); - priv->wrsent+=length; + memcpy(port->write_urb->transfer_buffer, + priv->wrbuf + priv->wrsent, length); + priv->wrsent += length; /* set up our urb */ - usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, length, - ((port->serial->type->write_bulk_callback) ? - port->serial->type->write_bulk_callback : - cyberjack_write_bulk_callback), + ((port->serial->type->write_bulk_callback) ? + port->serial->type->write_bulk_callback : + cyberjack_write_bulk_callback), port); /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; priv->wrsent = 0; goto exit; } - dbg("%s - priv->wrsent=%d", __func__,priv->wrsent); - dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled); + dbg("%s - priv->wrsent=%d", __func__, priv->wrsent); + dbg("%s - priv->wrfilled=%d", __func__, priv->wrfilled); blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; - if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) { + if (priv->wrsent >= priv->wrfilled || + priv->wrsent >= blksize) { dbg("%s - buffer cleaned", __func__); - memset( priv->wrbuf, 0, sizeof(priv->wrbuf) ); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); priv->wrfilled = 0; priv->wrsent = 0; } @@ -474,14 +488,14 @@ exit: usb_serial_port_softint(port); } -static int __init cyberjack_init (void) +static int __init cyberjack_init(void) { int retval; retval = usb_serial_register(&cyberjack_device); if (retval) goto failed_usb_serial_register; retval = usb_register(&cyberjack_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_VERSION " " DRIVER_AUTHOR); @@ -494,18 +508,18 @@ failed_usb_serial_register: return retval; } -static void __exit cyberjack_exit (void) +static void __exit cyberjack_exit(void) { - usb_deregister (&cyberjack_driver); - usb_serial_deregister (&cyberjack_device); + usb_deregister(&cyberjack_driver); + usb_serial_deregister(&cyberjack_device); } module_init(cyberjack_init); module_exit(cyberjack_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 0230d3c0888..22837a3f2f8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -2,7 +2,7 @@ * USB Cypress M8 driver * * Copyright (C) 2004 - * Lonnie Mendez (dignome@gmail.com) + * Lonnie Mendez (dignome@gmail.com) * Copyright (C) 2003,2004 * Neil Whelchel (koyama@firstlight.net) * @@ -11,19 +11,21 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * See http://geocities.com/i0xox0i for information on this driver and the * earthmate usb device. * * Lonnie Mendez <dignome@gmail.com> * 4-29-2005 - * Fixed problem where setting or retreiving the serial config would fail with - * EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial - * adapters. Issued new interval of 1ms instead of the default 10ms. As a - * result, transfer speed has been substantially increased. From avg. 850bps to - * avg. 3300bps. initial termios has also been modified. Cleaned up code and - * formatting issues so it is more readable. Replaced the C++ style comments. + * Fixed problem where setting or retreiving the serial config would fail + * with EPIPE. Removed CRTS toggling so the driver behaves more like + * other usbserial adapters. Issued new interval of 1ms instead of the + * default 10ms. As a result, transfer speed has been substantially + * increased from avg. 850bps to avg. 3300bps. initial termios has also + * been modified. Cleaned up code and formatting issues so it is more + * readable. Replaced the C++ style comments. * * Lonnie Mendez <dignome@gmail.com> * 12-15-2004 @@ -42,10 +44,11 @@ * */ -/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */ +/* Thanks to Neil Whelchel for writing the first cypress m8 implementation + for linux. */ /* Thanks to cypress for providing references for the hid reports. */ /* Thanks to Jiang Zhang for providing links and for general help. */ -/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */ +/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/ #include <linux/kernel.h> @@ -62,7 +65,7 @@ #include <linux/usb/serial.h> #include <linux/serial.h> #include <linux/delay.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "cypress_m8.h" @@ -112,7 +115,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver cypress_driver = { .name = "cypress", @@ -146,11 +149,13 @@ struct cypress_private { __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */ enum packet_format pkt_fmt; /* format to use for packet send / receive */ int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */ - int baud_rate; /* stores current baud rate in integer form */ + int baud_rate; /* stores current baud rate in + integer form */ int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ - /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */ + /* we pass a pointer to this as the arguement sent to + cypress_set_termios old_termios */ struct ktermios tmp_termios; /* stores the old termios settings */ }; @@ -163,33 +168,41 @@ struct cypress_buf { }; /* function prototypes for the Cypress USB to serial device */ -static int cypress_earthmate_startup (struct usb_serial *serial); -static int cypress_hidcom_startup (struct usb_serial *serial); -static int cypress_ca42v2_startup (struct usb_serial *serial); -static void cypress_shutdown (struct usb_serial *serial); -static int cypress_open (struct usb_serial_port *port, struct file *filp); -static void cypress_close (struct usb_serial_port *port, struct file *filp); -static int cypress_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static void cypress_send (struct usb_serial_port *port); -static int cypress_write_room (struct usb_serial_port *port); -static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void cypress_set_termios (struct usb_serial_port *port, struct ktermios * old); -static int cypress_tiocmget (struct usb_serial_port *port, struct file *file); -static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); -static int cypress_chars_in_buffer (struct usb_serial_port *port); -static void cypress_throttle (struct usb_serial_port *port); -static void cypress_unthrottle (struct usb_serial_port *port); -static void cypress_set_dead (struct usb_serial_port *port); -static void cypress_read_int_callback (struct urb *urb); -static void cypress_write_int_callback (struct urb *urb); +static int cypress_earthmate_startup(struct usb_serial *serial); +static int cypress_hidcom_startup(struct usb_serial *serial); +static int cypress_ca42v2_startup(struct usb_serial *serial); +static void cypress_shutdown(struct usb_serial *serial); +static int cypress_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void cypress_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static void cypress_send(struct usb_serial_port *port); +static int cypress_write_room(struct tty_struct *tty); +static int cypress_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int cypress_tiocmget(struct tty_struct *tty, struct file *file); +static int cypress_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static int cypress_chars_in_buffer(struct tty_struct *tty); +static void cypress_throttle(struct tty_struct *tty); +static void cypress_unthrottle(struct tty_struct *tty); +static void cypress_set_dead(struct usb_serial_port *port); +static void cypress_read_int_callback(struct urb *urb); +static void cypress_write_int_callback(struct urb *urb); /* write buffer functions */ static struct cypress_buf *cypress_buf_alloc(unsigned int size); -static void cypress_buf_free(struct cypress_buf *cb); -static void cypress_buf_clear(struct cypress_buf *cb); -static unsigned int cypress_buf_data_avail(struct cypress_buf *cb); -static unsigned int cypress_buf_space_avail(struct cypress_buf *cb); -static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count); -static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); +static void cypress_buf_free(struct cypress_buf *cb); +static void cypress_buf_clear(struct cypress_buf *cb); +static unsigned int cypress_buf_data_avail(struct cypress_buf *cb); +static unsigned int cypress_buf_space_avail(struct cypress_buf *cb); +static unsigned int cypress_buf_put(struct cypress_buf *cb, + const char *buf, unsigned int count); +static unsigned int cypress_buf_get(struct cypress_buf *cb, + char *buf, unsigned int count); static struct usb_serial_driver cypress_earthmate_device = { @@ -247,7 +260,7 @@ static struct usb_serial_driver cypress_hidcom_device = { static struct usb_serial_driver cypress_ca42v2_device = { .driver = { .owner = THIS_MODULE, - .name = "nokiaca42v2", + .name = "nokiaca42v2", }, .description = "Nokia CA-42 V2 Adapter", .usb_driver = &cypress_driver, @@ -322,8 +335,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) /* This function can either set or retrieve the current serial line settings */ -static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits, - int parity_enable, int parity_type, int reset, int cypress_request_type) +static int cypress_serial_control(struct tty_struct *tty, + struct usb_serial_port *port, speed_t baud_rate, int data_bits, + int stop_bits, int parity_enable, int parity_type, int reset, + int cypress_request_type) { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; @@ -331,111 +346,114 @@ static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_ra unsigned long flags; dbg("%s", __func__); - + priv = usb_get_serial_port_data(port); if (!priv->comm_is_ok) return -ENODEV; - switch(cypress_request_type) { - case CYPRESS_SET_CONFIG: + switch (cypress_request_type) { + case CYPRESS_SET_CONFIG: + new_baudrate = priv->baud_rate; + /* 0 means 'Hang up' so doesn't change the true bit rate */ + if (baud_rate == 0) new_baudrate = priv->baud_rate; - /* 0 means 'Hang up' so doesn't change the true bit rate */ - if (baud_rate == 0) - new_baudrate = priv->baud_rate; - /* Change of speed ? */ - else if (baud_rate != priv->baud_rate) { - dbg("%s - baud rate is changing", __func__); - retval = analyze_baud_rate(port, baud_rate); - if (retval >= 0) { - new_baudrate = retval; - dbg("%s - New baud rate set to %d", - __func__, new_baudrate); - } - } - dbg("%s - baud rate is being sent as %d", __func__, new_baudrate); - - memset(feature_buffer, 0, sizeof(feature_buffer)); - /* fill the feature_buffer with new configuration */ - *((u_int32_t *)feature_buffer) = new_baudrate; - - feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ - /* 1 bit gap */ - feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ - feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ - feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ - /* 1 bit gap */ - feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ - - dbg("%s - device is being sent this feature report:", __func__); - dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1], - feature_buffer[2], feature_buffer[3], feature_buffer[4]); - - do { - retval = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - HID_REQ_SET_REPORT, - USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); - - if (tries++ >= 3) - break; - - } while (retval != sizeof(feature_buffer) && - retval != -ENODEV); - - if (retval != sizeof(feature_buffer)) { - err("%s - failed sending serial line settings - %d", __func__, retval); - cypress_set_dead(port); - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->baud_rate = new_baudrate; - priv->current_config = feature_buffer[4]; - spin_unlock_irqrestore(&priv->lock, flags); - /* If we asked for a speed change encode it */ - if (baud_rate) - tty_encode_baud_rate(port->tty, - new_baudrate, new_baudrate); - } - break; - case CYPRESS_GET_CONFIG: - if (priv->get_cfg_unsafe) { - /* Not implemented for this device, - and if we try to do it we're likely - to crash the hardware. */ - return -ENOTTY; - } - dbg("%s - retreiving serial line settings", __func__); - /* set initial values in feature buffer */ - memset(feature_buffer, 0, sizeof(feature_buffer)); - - do { - retval = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - HID_REQ_GET_REPORT, - USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0x0300, 0, feature_buffer, - sizeof(feature_buffer), 500); - - if (tries++ >= 3) - break; - - } while (retval != sizeof(feature_buffer) && - retval != -ENODEV); - - if (retval != sizeof(feature_buffer)) { - err("%s - failed to retrieve serial line settings - %d", __func__, retval); - cypress_set_dead(port); - return retval; - } else { - spin_lock_irqsave(&priv->lock, flags); - - /* store the config in one byte, and later use bit masks to check values */ - priv->current_config = feature_buffer[4]; - priv->baud_rate = *((u_int32_t *)feature_buffer); - spin_unlock_irqrestore(&priv->lock, flags); + /* Change of speed ? */ + else if (baud_rate != priv->baud_rate) { + dbg("%s - baud rate is changing", __func__); + retval = analyze_baud_rate(port, baud_rate); + if (retval >= 0) { + new_baudrate = retval; + dbg("%s - New baud rate set to %d", + __func__, new_baudrate); } + } + dbg("%s - baud rate is being sent as %d", + __func__, new_baudrate); + + memset(feature_buffer, 0, sizeof(feature_buffer)); + /* fill the feature_buffer with new configuration */ + *((u_int32_t *)feature_buffer) = new_baudrate; + feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ + /* 1 bit gap */ + feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ + feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ + feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ + /* 1 bit gap */ + feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ + + dbg("%s - device is being sent this feature report:", + __func__); + dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, + feature_buffer[0], feature_buffer[1], + feature_buffer[2], feature_buffer[3], + feature_buffer[4]); + + do { + retval = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + sizeof(feature_buffer), 500); + + if (tries++ >= 3) + break; + + } while (retval != sizeof(feature_buffer) && + retval != -ENODEV); + + if (retval != sizeof(feature_buffer)) { + err("%s - failed sending serial line settings - %d", + __func__, retval); + cypress_set_dead(port); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->baud_rate = new_baudrate; + priv->current_config = feature_buffer[4]; + spin_unlock_irqrestore(&priv->lock, flags); + /* If we asked for a speed change encode it */ + if (baud_rate) + tty_encode_baud_rate(tty, + new_baudrate, new_baudrate); + } + break; + case CYPRESS_GET_CONFIG: + if (priv->get_cfg_unsafe) { + /* Not implemented for this device, + and if we try to do it we're likely + to crash the hardware. */ + return -ENOTTY; + } + dbg("%s - retreiving serial line settings", __func__); + /* set initial values in feature buffer */ + memset(feature_buffer, 0, sizeof(feature_buffer)); + + do { + retval = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + HID_REQ_GET_REPORT, + USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + sizeof(feature_buffer), 500); + + if (tries++ >= 3) + break; + } while (retval != sizeof(feature_buffer) + && retval != -ENODEV); + + if (retval != sizeof(feature_buffer)) { + err("%s - failed to retrieve serial line settings - %d", __func__, retval); + cypress_set_dead(port); + return retval; + } else { + spin_lock_irqsave(&priv->lock, flags); + /* store the config in one byte, and later + use bit masks to check values */ + priv->current_config = feature_buffer[4]; + priv->baud_rate = *((u_int32_t *)feature_buffer); + spin_unlock_irqrestore(&priv->lock, flags); + } } spin_lock_irqsave(&priv->lock, flags); ++priv->cmd_count; @@ -468,14 +486,14 @@ static void cypress_set_dead(struct usb_serial_port *port) *****************************************************************************/ -static int generic_startup (struct usb_serial *serial) +static int generic_startup(struct usb_serial *serial) { struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; dbg("%s - port %d", __func__, port->number); - priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL); + priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -487,9 +505,9 @@ static int generic_startup (struct usb_serial *serial) return -ENOMEM; } init_waitqueue_head(&priv->delta_msr_wait); - - usb_reset_configuration (serial->dev); - + + usb_reset_configuration(serial->dev); + priv->cmd_ctrl = 0; priv->line_control = 0; priv->termios_initialized = 0; @@ -500,30 +518,30 @@ static int generic_startup (struct usb_serial *serial) small. Otherwise we can use the slightly more compact format. This is in accordance with the cypress_m8 serial converter app note. */ - if (port->interrupt_out_size > 9) { + if (port->interrupt_out_size > 9) priv->pkt_fmt = packet_format_1; - } else { + else priv->pkt_fmt = packet_format_2; - } + if (interval > 0) { priv->write_urb_interval = interval; priv->read_urb_interval = interval; dbg("%s - port %d read & write intervals forced to %d", - __func__,port->number,interval); + __func__, port->number, interval); } else { priv->write_urb_interval = port->interrupt_out_urb->interval; priv->read_urb_interval = port->interrupt_in_urb->interval; dbg("%s - port %d intervals: read=%d write=%d", - __func__,port->number, - priv->read_urb_interval,priv->write_urb_interval); + __func__, port->number, + priv->read_urb_interval, priv->write_urb_interval); } usb_set_serial_port_data(port, priv); - + return 0; } -static int cypress_earthmate_startup (struct usb_serial *serial) +static int cypress_earthmate_startup(struct usb_serial *serial) { struct cypress_private *priv; struct usb_serial_port *port = serial->port[0]; @@ -541,7 +559,8 @@ static int cypress_earthmate_startup (struct usb_serial *serial) /* All Earthmate devices use the separated-count packet format! Idiotic. */ priv->pkt_fmt = packet_format_1; - if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) { + if (serial->dev->descriptor.idProduct != + cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) { /* The old original USB Earthmate seemed able to handle GET_CONFIG requests; everything they've produced since that time crashes if this command is @@ -555,7 +574,7 @@ static int cypress_earthmate_startup (struct usb_serial *serial) } /* cypress_earthmate_startup */ -static int cypress_hidcom_startup (struct usb_serial *serial) +static int cypress_hidcom_startup(struct usb_serial *serial) { struct cypress_private *priv; @@ -569,12 +588,12 @@ static int cypress_hidcom_startup (struct usb_serial *serial) priv = usb_get_serial_port_data(serial->port[0]); priv->chiptype = CT_CYPHIDCOM; - + return 0; } /* cypress_hidcom_startup */ -static int cypress_ca42v2_startup (struct usb_serial *serial) +static int cypress_ca42v2_startup(struct usb_serial *serial) { struct cypress_private *priv; @@ -593,11 +612,11 @@ static int cypress_ca42v2_startup (struct usb_serial *serial) } /* cypress_ca42v2_startup */ -static void cypress_shutdown (struct usb_serial *serial) +static void cypress_shutdown(struct usb_serial *serial) { struct cypress_private *priv; - dbg ("%s - port %d", __func__, serial->port[0]->number); + dbg("%s - port %d", __func__, serial->port[0]->number); /* all open ports are closed at this point */ @@ -611,7 +630,8 @@ static void cypress_shutdown (struct usb_serial *serial) } -static int cypress_open (struct usb_serial_port *port, struct file *filp) +static int cypress_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct cypress_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -636,37 +656,44 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->lock, flags); /* setting to zero could cause data loss */ - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; /* raise both lines and set termios */ spin_lock_irqsave(&priv->lock, flags); priv->line_control = CONTROL_DTR | CONTROL_RTS; priv->cmd_ctrl = 1; spin_unlock_irqrestore(&priv->lock, flags); - result = cypress_write(port, NULL, 0); + result = cypress_write(tty, port, NULL, 0); if (result) { - dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed setting the control lines - error %d\n", + __func__, result); return result; } else dbg("%s - success setting the control lines", __func__); - cypress_set_termios(port, &priv->tmp_termios); + if (tty) + cypress_set_termios(tty, port, &priv->tmp_termios); /* setup the port and start reading from the device */ - if(!port->interrupt_in_urb){ + if (!port->interrupt_in_urb) { err("%s - interrupt_in_urb is empty!", __func__); - return(-1); + return -1; } usb_fill_int_urb(port->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), - port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (result){ - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + if (result) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); cypress_set_dead(port); } @@ -674,7 +701,8 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) } /* cypress_open */ -static void cypress_close(struct usb_serial_port *port, struct file * filp) +static void cypress_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct cypress_private *priv = usb_get_serial_port_data(port); unsigned int c_cflag; @@ -688,7 +716,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) spin_lock_irq(&priv->lock); timeout = CYPRESS_CLOSING_WAIT; init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); + add_wait_queue(&tty->write_wait, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (cypress_buf_data_avail(priv->buf) == 0 @@ -701,7 +729,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) spin_lock_irq(&priv->lock); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); + remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ cypress_buf_clear(priv->buf); spin_unlock_irq(&priv->lock); @@ -713,19 +741,21 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) return; } /* wait for characters to drain from device */ - bps = tty_get_baud_rate(port->tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); + if (tty) { + bps = tty_get_baud_rate(tty); + if (bps > 1200) + timeout = max((HZ * 2560) / bps, HZ / 10); + else + timeout = 2 * HZ; + schedule_timeout_interruptible(timeout); + } dbg("%s - stopping urbs", __func__); - usb_kill_urb (port->interrupt_in_urb); - usb_kill_urb (port->interrupt_out_urb); + usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_out_urb); - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; if (c_cflag & HUPCL) { /* drop dtr and rts */ priv = usb_get_serial_port_data(port); @@ -733,22 +763,23 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) priv->line_control = 0; priv->cmd_ctrl = 1; spin_unlock_irq(&priv->lock); - cypress_write(port, NULL, 0); + cypress_write(tty, port, NULL, 0); } } if (stats) - dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", - priv->bytes_in, priv->bytes_out, priv->cmd_count); + dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", + priv->bytes_in, priv->bytes_out, priv->cmd_count); mutex_unlock(&port->serial->disc_mutex); } /* cypress_close */ -static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count) +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - + dbg("%s - port %d, %d bytes", __func__, port->number, count); /* line control commands, which need to be executed immediately, @@ -758,10 +789,10 @@ static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, count = 0; goto finish; } - + if (!count) return count; - + spin_lock_irqsave(&priv->lock, flags); count = cypress_buf_put(priv->buf, buf, count); spin_unlock_irqrestore(&priv->lock, flags); @@ -778,13 +809,14 @@ static void cypress_send(struct usb_serial_port *port) int count = 0, result, offset, actual_size; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - + if (!priv->comm_is_ok) return; dbg("%s - port %d", __func__, port->number); - dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size); - + dbg("%s - interrupt out size is %d", __func__, + port->interrupt_out_size); + spin_lock_irqsave(&priv->lock, flags); if (priv->write_urb_in_use) { dbg("%s - can't write, urb in use", __func__); @@ -794,7 +826,8 @@ static void cypress_send(struct usb_serial_port *port) spin_unlock_irqrestore(&priv->lock, flags); /* clear buffer */ - memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size); + memset(port->interrupt_out_urb->transfer_buffer, 0, + port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); switch (priv->pkt_fmt) { @@ -825,9 +858,8 @@ static void cypress_send(struct usb_serial_port *port) count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset], port->interrupt_out_size-offset); - if (count == 0) { + if (count == 0) return; - } switch (priv->pkt_fmt) { default: @@ -851,26 +883,29 @@ send: actual_size = count + (priv->pkt_fmt == packet_format_1 ? 2 : 1); - usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size, - port->interrupt_out_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, + port->interrupt_out_size, + port->interrupt_out_urb->transfer_buffer); usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), port->interrupt_out_buffer, port->interrupt_out_size, cypress_write_int_callback, port, priv->write_urb_interval); - result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, - result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); priv->write_urb_in_use = 0; cypress_set_dead(port); } spin_lock_irqsave(&priv->lock, flags); - if (priv->cmd_ctrl) { + if (priv->cmd_ctrl) priv->cmd_ctrl = 0; - } - priv->bytes_out += count; /* do not count the line control and size bytes */ + + /* do not count the line control and size bytes */ + priv->bytes_out += count; spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); @@ -878,8 +913,9 @@ send: /* returns how much space is available in the soft buffer */ -static int cypress_write_room(struct usb_serial_port *port) +static int cypress_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -895,13 +931,14 @@ static int cypress_write_room(struct usb_serial_port *port) } -static int cypress_tiocmget (struct usb_serial_port *port, struct file *file) +static int cypress_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); __u8 status, control; unsigned int result = 0; unsigned long flags; - + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); @@ -922,12 +959,13 @@ static int cypress_tiocmget (struct usb_serial_port *port, struct file *file) } -static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, +static int cypress_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - + dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); @@ -942,63 +980,60 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, priv->cmd_ctrl = 1; spin_unlock_irqrestore(&priv->lock, flags); - return cypress_write(port, NULL, 0); + return cypress_write(tty, port, NULL, 0); } -static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +static int cypress_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); switch (cmd) { - /* This code comes from drivers/char/serial.c and ftdi_sio.c */ - case TIOCMIWAIT: - while (priv != NULL) { - interruptible_sleep_on(&priv->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - else { - char diff = priv->diff_status; - - if (diff == 0) { - return -EIO; /* no change => error */ - } - - /* consume all events */ - priv->diff_status = 0; - - /* return 0 if caller wanted to know about these bits */ - if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) || - ((arg & TIOCM_DSR) && (diff & UART_DSR)) || - ((arg & TIOCM_CD) && (diff & UART_CD)) || - ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) { - return 0; - } - /* otherwise caller can't care less about what happened, - * and so we continue to wait for more events. - */ - } + /* This code comes from drivers/char/serial.c and ftdi_sio.c */ + case TIOCMIWAIT: + while (priv != NULL) { + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + else { + char diff = priv->diff_status; + if (diff == 0) + return -EIO; /* no change => error */ + + /* consume all events */ + priv->diff_status = 0; + + /* return 0 if caller wanted to know about + these bits */ + if (((arg & TIOCM_RNG) && (diff & UART_RI)) || + ((arg & TIOCM_DSR) && (diff & UART_DSR)) || + ((arg & TIOCM_CD) && (diff & UART_CD)) || + ((arg & TIOCM_CTS) && (diff & UART_CTS))) + return 0; + /* otherwise caller can't care less about what + * happened, and so we continue to wait for + * more events. + */ } - return 0; - break; - default: - break; + } + return 0; + default: + break; } - dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd); - return -ENOIOCTLCMD; } /* cypress_ioctl */ -static void cypress_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct cypress_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty; int data_bits, stop_bits, parity_type, parity_enable; unsigned cflag, iflag; unsigned long flags; @@ -1007,8 +1042,6 @@ static void cypress_set_termios (struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - tty = port->tty; - spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { if (priv->chiptype == CT_EARTHMATE) { @@ -1060,28 +1093,24 @@ static void cypress_set_termios (struct usb_serial_port *port, } else parity_enable = parity_type = 0; - if (cflag & CSIZE) { - switch (cflag & CSIZE) { - case CS5: - data_bits = 0; - break; - case CS6: - data_bits = 1; - break; - case CS7: - data_bits = 2; - break; - case CS8: - data_bits = 3; - break; - default: - err("%s - CSIZE was set, but not CS5-CS8", - __func__); - data_bits = 3; - } - } else + switch (cflag & CSIZE) { + case CS5: + data_bits = 0; + break; + case CS6: + data_bits = 1; + break; + case CS7: + data_bits = 2; + break; + case CS8: data_bits = 3; - + break; + default: + err("%s - CSIZE was set, but not CS5-CS8", + __func__); + data_bits = 3; + } spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { @@ -1096,19 +1125,21 @@ static void cypress_set_termios (struct usb_serial_port *port, "%d data_bits (+5)", __func__, stop_bits, parity_enable, parity_type, data_bits); - cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits, - parity_enable, parity_type, 0, CYPRESS_SET_CONFIG); + cypress_serial_control(tty, port, tty_get_baud_rate(tty), + data_bits, stop_bits, + parity_enable, parity_type, + 0, CYPRESS_SET_CONFIG); /* we perform a CYPRESS_GET_CONFIG so that the current settings are * filled into the private structure this should confirm that all is * working if it returns what we just set */ - cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); + cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); /* Here we can define custom tty settings for devices; the main tty * termios flag base comes from empeg.c */ spin_lock_irqsave(&priv->lock, flags); - if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) { + if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { dbg("Using custom termios settings for a baud rate of " "4800bps."); /* define custom termios settings for NMEA protocol */ @@ -1142,20 +1173,21 @@ static void cypress_set_termios (struct usb_serial_port *port, /* if necessary, set lines */ if (linechange) { priv->cmd_ctrl = 1; - cypress_write(port, NULL, 0); + cypress_write(tty, port, NULL, 0); } } /* cypress_set_termios */ /* returns amount of data still left in soft buffer */ -static int cypress_chars_in_buffer(struct usb_serial_port *port) +static int cypress_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; dbg("%s - port %d", __func__, port->number); - + spin_lock_irqsave(&priv->lock, flags); chars = cypress_buf_data_avail(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); @@ -1165,8 +1197,9 @@ static int cypress_chars_in_buffer(struct usb_serial_port *port) } -static void cypress_throttle (struct usb_serial_port *port) +static void cypress_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -1178,8 +1211,9 @@ static void cypress_throttle (struct usb_serial_port *port) } -static void cypress_unthrottle (struct usb_serial_port *port) +static void cypress_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); int actually_throttled, result; unsigned long flags; @@ -1232,12 +1266,13 @@ static void cypress_read_int_callback(struct urb *urb) /* precursor to disconnect so just go away */ return; case -EPIPE: - usb_clear_halt(port->serial->dev,0x81); + usb_clear_halt(port->serial->dev, 0x81); break; default: /* something ugly is going on... */ - dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n", - __func__, status); + dev_err(&urb->dev->dev, + "%s - unexpected nonzero read status received: %d\n", + __func__, status); cypress_set_dead(port); return; } @@ -1251,7 +1286,7 @@ static void cypress_read_int_callback(struct urb *urb) } spin_unlock_irqrestore(&priv->lock, flags); - tty = port->tty; + tty = port->port.tty; if (!tty) { dbg("%s - bad tty pointer - exiting", __func__); return; @@ -1285,8 +1320,8 @@ static void cypress_read_int_callback(struct urb *urb) goto continue_read; } - usb_serial_debug_data (debug, &port->dev, __func__, - urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); spin_lock_irqsave(&priv->lock, flags); /* check to see if status has changed */ @@ -1327,7 +1362,7 @@ static void cypress_read_int_callback(struct urb *urb) data[i]); tty_insert_flip_char(tty, data[i], tty_flag); } - tty_flip_buffer_push(port->tty); + tty_flip_buffer_push(port->port.tty); } spin_lock_irqsave(&priv->lock, flags); @@ -1339,13 +1374,14 @@ continue_read: /* Continue trying to always read... unless the port has closed. */ - if (port->open_count > 0 && priv->comm_is_ok) { + if (port->port.count > 0 && priv->comm_is_ok) { usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, - cypress_read_int_callback, port, priv->read_urb_interval); + cypress_read_int_callback, port, + priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) { dev_err(&urb->dev->dev, "%s - failed resubmitting " @@ -1369,42 +1405,43 @@ static void cypress_write_int_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); switch (status) { - case 0: - /* success */ + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __func__, status); + priv->write_urb_in_use = 0; + return; + case -EPIPE: /* no break needed; clear halt and resubmit */ + if (!priv->comm_is_ok) break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); - priv->write_urb_in_use = 0; + usb_clear_halt(port->serial->dev, 0x02); + /* error in the urb, so we have to resubmit it */ + dbg("%s - nonzero write bulk status received: %d", + __func__, status); + port->interrupt_out_urb->transfer_buffer_length = 1; + port->interrupt_out_urb->dev = port->serial->dev; + result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); + if (!result) return; - case -EPIPE: /* no break needed; clear halt and resubmit */ - if (!priv->comm_is_ok) - break; - usb_clear_halt(port->serial->dev, 0x02); - /* error in the urb, so we have to resubmit it */ - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - port->interrupt_out_urb->transfer_buffer_length = 1; - port->interrupt_out_urb->dev = port->serial->dev; - result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); - if (!result) - return; - dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", - __func__, result); - cypress_set_dead(port); - break; - default: - dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n", - __func__, status); - cypress_set_dead(port); - break; + dev_err(&urb->dev->dev, + "%s - failed resubmitting write urb, error %d\n", + __func__, result); + cypress_set_dead(port); + break; + default: + dev_err(&urb->dev->dev, + "%s - unexpected nonzero write status received: %d\n", + __func__, status); + cypress_set_dead(port); + break; } - priv->write_urb_in_use = 0; - + /* send any buffered data */ cypress_send(port); } @@ -1486,7 +1523,8 @@ static void cypress_buf_clear(struct cypress_buf *cb) static unsigned int cypress_buf_data_avail(struct cypress_buf *cb) { if (cb != NULL) - return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size); + return (cb->buf_size + cb->buf_put - cb->buf_get) + % cb->buf_size; else return 0; } @@ -1502,7 +1540,8 @@ static unsigned int cypress_buf_data_avail(struct cypress_buf *cb) static unsigned int cypress_buf_space_avail(struct cypress_buf *cb) { if (cb != NULL) - return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size); + return (cb->buf_size + cb->buf_get - cb->buf_put - 1) + % cb->buf_size; else return 0; } @@ -1602,9 +1641,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, static int __init cypress_init(void) { int retval; - + dbg("%s", __func__); - + retval = usb_serial_register(&cypress_earthmate_device); if (retval) goto failed_em_register; @@ -1632,23 +1671,23 @@ failed_em_register: } -static void __exit cypress_exit (void) +static void __exit cypress_exit(void) { dbg("%s", __func__); - usb_deregister (&cypress_driver); - usb_serial_deregister (&cypress_earthmate_device); - usb_serial_deregister (&cypress_hidcom_device); - usb_serial_deregister (&cypress_ca42v2_device); + usb_deregister(&cypress_driver); + usb_serial_deregister(&cypress_earthmate_device); + usb_serial_deregister(&cypress_hidcom_device); + usb_serial_deregister(&cypress_ca42v2_device); } module_init(cypress_init); module_exit(cypress_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 0388065bb79..e772b01ac3a 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -54,7 +54,7 @@ #define UART_DSR 0x20 /* data set ready - flow control - device to host */ #define CONTROL_RTS 0x10 /* request to send - flow control - host to device */ #define UART_CTS 0x10 /* clear to send - flow control - device to host */ -#define UART_RI 0x10 /* ring indicator - modem - device to host */ +#define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ /* Note - the below has nothing to to with the "feature report" reset */ diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 04a56f300ea..240aad1acaa 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -15,7 +15,7 @@ * Al Borchers (borchers@steinerpoint.com) * * (12/03/2001) gkh -* switched to using port->open_count instead of private version. +* switched to using port->port.count instead of private version. * Removed port->active * * (04/08/2001) gb @@ -229,8 +229,6 @@ * in case a wake up is lost. * - Following Documentation/DocBook/kernel-locking.pdf no spin locks * are held when calling copy_to/from_user or printk. -* -* $Id: digi_acceleport.c,v 1.80.1.2 2000/11/02 05:45:08 root Exp $ */ #include <linux/kernel.h> @@ -243,7 +241,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/workqueue.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/wait.h> #include <linux/usb/serial.h> @@ -443,22 +441,23 @@ static int digi_set_modem_signals(struct usb_serial_port *port, unsigned int modem_signals, int interruptible); static int digi_transmit_idle(struct usb_serial_port *port, unsigned long timeout); -static void digi_rx_throttle (struct usb_serial_port *port); -static void digi_rx_unthrottle (struct usb_serial_port *port); -static void digi_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios); -static void digi_break_ctl(struct usb_serial_port *port, int break_state); -static int digi_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg); -static int digi_tiocmget(struct usb_serial_port *port, struct file *file); -static int digi_tiocmset(struct usb_serial_port *port, struct file *file, +static void digi_rx_throttle(struct tty_struct *tty); +static void digi_rx_unthrottle(struct tty_struct *tty); +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void digi_break_ctl(struct tty_struct *tty, int break_state); +static int digi_tiocmget(struct tty_struct *tty, struct file *file); +static int digi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count); +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); static void digi_write_bulk_callback(struct urb *urb); -static int digi_write_room(struct usb_serial_port *port); -static int digi_chars_in_buffer(struct usb_serial_port *port); -static int digi_open(struct usb_serial_port *port, struct file *filp); -static void digi_close(struct usb_serial_port *port, struct file *filp); +static int digi_write_room(struct tty_struct *tty); +static int digi_chars_in_buffer(struct tty_struct *tty); +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_shutdown(struct usb_serial *serial); @@ -487,7 +486,7 @@ static struct usb_device_id id_table_4 [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver digi_driver = { .name = "digi_acceleport", @@ -518,7 +517,6 @@ static struct usb_serial_driver digi_acceleport_2_device = { .chars_in_buffer = digi_chars_in_buffer, .throttle = digi_rx_throttle, .unthrottle = digi_rx_unthrottle, - .ioctl = digi_ioctl, .set_termios = digi_set_termios, .break_ctl = digi_break_ctl, .tiocmget = digi_tiocmget, @@ -545,7 +543,6 @@ static struct usb_serial_driver digi_acceleport_4_device = { .chars_in_buffer = digi_chars_in_buffer, .throttle = digi_rx_throttle, .unthrottle = digi_rx_unthrottle, - .ioctl = digi_ioctl, .set_termios = digi_set_termios, .break_ctl = digi_break_ctl, .tiocmget = digi_tiocmget, @@ -558,21 +555,22 @@ static struct usb_serial_driver digi_acceleport_4_device = { /* Functions */ /* -* Cond Wait Interruptible Timeout Irqrestore -* -* Do spin_unlock_irqrestore and interruptible_sleep_on_timeout -* so that wake ups are not lost if they occur between the unlock -* and the sleep. In other words, spin_unlock_irqrestore and -* interruptible_sleep_on_timeout are "atomic" with respect to -* wake ups. This is used to implement condition variables. -* -* interruptible_sleep_on_timeout is deprecated and has been replaced -* with the equivalent code. -*/ + * Cond Wait Interruptible Timeout Irqrestore + * + * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout + * so that wake ups are not lost if they occur between the unlock + * and the sleep. In other words, spin_unlock_irqrestore and + * interruptible_sleep_on_timeout are "atomic" with respect to + * wake ups. This is used to implement condition variables. + * + * interruptible_sleep_on_timeout is deprecated and has been replaced + * with the equivalent code. + */ static long cond_wait_interruptible_timeout_irqrestore( wait_queue_head_t *q, long timeout, spinlock_t *lock, unsigned long flags) +__releases(lock) { DEFINE_WAIT(wait); @@ -586,15 +584,16 @@ static long cond_wait_interruptible_timeout_irqrestore( /* -* Digi Wakeup Write -* -* Wake up port, line discipline, and tty processes sleeping -* on writes. -*/ + * Digi Wakeup Write + * + * Wake up port, line discipline, and tty processes sleeping + * on writes. + */ static void digi_wakeup_write_lock(struct work_struct *work) { - struct digi_port *priv = container_of(work, struct digi_port, dp_wakeup_work); + struct digi_port *priv = + container_of(work, struct digi_port, dp_wakeup_work); struct usb_serial_port *port = priv->dp_port; unsigned long flags; @@ -605,20 +604,20 @@ static void digi_wakeup_write_lock(struct work_struct *work) static void digi_wakeup_write(struct usb_serial_port *port) { - tty_wakeup(port->tty); + tty_wakeup(port->port.tty); } /* -* Digi Write OOB Command -* -* Write commands on the out of band port. Commands are 4 -* bytes each, multiple commands can be sent at once, and -* no command will be split across USB packets. Returns 0 -* if successful, -EINTR if interrupted while sleeping and -* the interruptible flag is true, or a negative error -* returned by usb_submit_urb. -*/ + * Digi Write OOB Command + * + * Write commands on the out of band port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. Returns 0 + * if successful, -EINTR if interrupted while sleeping and + * the interruptible flag is true, or a negative error + * returned by usb_submit_urb. + */ static int digi_write_oob_command(struct usb_serial_port *port, unsigned char *buf, int count, int interruptible) @@ -633,8 +632,8 @@ static int digi_write_oob_command(struct usb_serial_port *port, dbg("digi_write_oob_command: TOP: port=%d, count=%d", oob_priv->dp_port_num, count); spin_lock_irqsave(&oob_priv->dp_port_lock, flags); - while(count > 0) { - while(oob_port->write_urb->status == -EINPROGRESS + while (count > 0) { + while (oob_port->write_urb->status == -EINPROGRESS || oob_priv->dp_write_urb_in_use) { cond_wait_interruptible_timeout_irqrestore( &oob_port->write_wait, DIGI_RETRY_TIMEOUT, @@ -651,7 +650,8 @@ static int digi_write_oob_command(struct usb_serial_port *port, memcpy(oob_port->write_urb->transfer_buffer, buf, len); oob_port->write_urb->transfer_buffer_length = len; oob_port->write_urb->dev = port->serial->dev; - if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) { + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { oob_priv->dp_write_urb_in_use = 1; count -= len; buf += len; @@ -666,16 +666,16 @@ static int digi_write_oob_command(struct usb_serial_port *port, /* -* Digi Write In Band Command -* -* Write commands on the given port. Commands are 4 -* bytes each, multiple commands can be sent at once, and -* no command will be split across USB packets. If timeout -* is non-zero, write in band command will return after -* waiting unsuccessfully for the URB status to clear for -* timeout ticks. Returns 0 if successful, or a negative -* error returned by digi_write. -*/ + * Digi Write In Band Command + * + * Write commands on the given port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. If timeout + * is non-zero, write in band command will return after + * waiting unsuccessfully for the URB status to clear for + * timeout ticks. Returns 0 if successful, or a negative + * error returned by digi_write. + */ static int digi_write_inb_command(struct usb_serial_port *port, unsigned char *buf, int count, unsigned long timeout) @@ -695,9 +695,10 @@ static int digi_write_inb_command(struct usb_serial_port *port, timeout = ULONG_MAX; spin_lock_irqsave(&priv->dp_port_lock, flags); - while(count > 0 && ret == 0) { - while((port->write_urb->status == -EINPROGRESS - || priv->dp_write_urb_in_use) && time_before(jiffies, timeout)) { + while (count > 0 && ret == 0) { + while ((port->write_urb->status == -EINPROGRESS + || priv->dp_write_urb_in_use) + && time_before(jiffies, timeout)) { cond_wait_interruptible_timeout_irqrestore( &port->write_wait, DIGI_RETRY_TIMEOUT, &priv->dp_port_lock, flags); @@ -728,7 +729,8 @@ static int digi_write_inb_command(struct usb_serial_port *port, } port->write_urb->dev = port->serial->dev; - if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { priv->dp_write_urb_in_use = 1; priv->dp_out_buf_len = 0; count -= len; @@ -746,14 +748,14 @@ static int digi_write_inb_command(struct usb_serial_port *port, /* -* Digi Set Modem Signals -* -* Sets or clears DTR and RTS on the port, according to the -* modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags -* for the modem_signals argument. Returns 0 if successful, -* -EINTR if interrupted while sleeping, or a non-zero error -* returned by usb_submit_urb. -*/ + * Digi Set Modem Signals + * + * Sets or clears DTR and RTS on the port, according to the + * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags + * for the modem_signals argument. Returns 0 if successful, + * -EINTR if interrupted while sleeping, or a non-zero error + * returned by usb_submit_urb. + */ static int digi_set_modem_signals(struct usb_serial_port *port, unsigned int modem_signals, int interruptible) @@ -761,7 +763,7 @@ static int digi_set_modem_signals(struct usb_serial_port *port, int ret; struct digi_port *port_priv = usb_get_serial_port_data(port); - struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; + struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); unsigned char *data = oob_port->write_urb->transfer_buffer; unsigned long flags = 0; @@ -773,7 +775,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port, spin_lock_irqsave(&oob_priv->dp_port_lock, flags); spin_lock(&port_priv->dp_port_lock); - while(oob_port->write_urb->status == -EINPROGRESS || oob_priv->dp_write_urb_in_use) { + while (oob_port->write_urb->status == -EINPROGRESS || + oob_priv->dp_write_urb_in_use) { spin_unlock(&port_priv->dp_port_lock); cond_wait_interruptible_timeout_irqrestore( &oob_port->write_wait, DIGI_RETRY_TIMEOUT, @@ -785,17 +788,20 @@ static int digi_set_modem_signals(struct usb_serial_port *port, } data[0] = DIGI_CMD_SET_DTR_SIGNAL; data[1] = port_priv->dp_port_num; - data[2] = (modem_signals&TIOCM_DTR) ? DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; + data[2] = (modem_signals & TIOCM_DTR) ? + DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; data[3] = 0; data[4] = DIGI_CMD_SET_RTS_SIGNAL; data[5] = port_priv->dp_port_num; - data[6] = (modem_signals&TIOCM_RTS) ? DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; + data[6] = (modem_signals & TIOCM_RTS) ? + DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; data[7] = 0; oob_port->write_urb->transfer_buffer_length = 8; oob_port->write_urb->dev = port->serial->dev; - if ((ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC)) == 0) { + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { oob_priv->dp_write_urb_in_use = 1; port_priv->dp_modem_signals = (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS)) @@ -809,16 +815,16 @@ static int digi_set_modem_signals(struct usb_serial_port *port, } /* -* Digi Transmit Idle -* -* Digi transmit idle waits, up to timeout ticks, for the transmitter -* to go idle. It returns 0 if successful or a negative error. -* -* There are race conditions here if more than one process is calling -* digi_transmit_idle on the same port at the same time. However, this -* is only called from close, and only one process can be in close on a -* port at a time, so its ok. -*/ + * Digi Transmit Idle + * + * Digi transmit idle waits, up to timeout ticks, for the transmitter + * to go idle. It returns 0 if successful or a negative error. + * + * There are race conditions here if more than one process is calling + * digi_transmit_idle on the same port at the same time. However, this + * is only called from close, and only one process can be in close on a + * port at a time, so its ok. + */ static int digi_transmit_idle(struct usb_serial_port *port, unsigned long timeout) @@ -837,12 +843,13 @@ static int digi_transmit_idle(struct usb_serial_port *port, timeout += jiffies; - if ((ret = digi_write_inb_command(port, buf, 2, timeout - jiffies)) != 0) + ret = digi_write_inb_command(port, buf, 2, timeout - jiffies); + if (ret != 0) return ret; spin_lock_irqsave(&priv->dp_port_lock, flags); - while(time_before(jiffies, timeout) && !priv->dp_transmit_idle) { + while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) { cond_wait_interruptible_timeout_irqrestore( &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT, &priv->dp_port_lock, flags); @@ -857,9 +864,10 @@ static int digi_transmit_idle(struct usb_serial_port *port, } -static void digi_rx_throttle(struct usb_serial_port *port) +static void digi_rx_throttle(struct tty_struct *tty) { unsigned long flags; + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); @@ -873,10 +881,11 @@ static void digi_rx_throttle(struct usb_serial_port *port) } -static void digi_rx_unthrottle(struct usb_serial_port *port) +static void digi_rx_unthrottle(struct tty_struct *tty) { int ret = 0; unsigned long flags; + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num); @@ -901,26 +910,25 @@ static void digi_rx_unthrottle(struct usb_serial_port *port) } -static void digi_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - struct digi_port *priv = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned int iflag = tty->termios->c_iflag; unsigned int cflag = tty->termios->c_cflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int old_cflag = old_termios->c_cflag; unsigned char buf[32]; unsigned int modem_signals; - int arg,ret; + int arg, ret; int i = 0; speed_t baud; dbg("digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x", priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); /* set baud rate */ - if ((baud = tty_get_baud_rate(tty)) != tty_termios_baud_rate(old_termios)) { + baud = tty_get_baud_rate(tty); + if (baud != tty_termios_baud_rate(old_termios)) { arg = -1; /* reassert DTR and (maybe) RTS on transition from B0 */ @@ -934,30 +942,30 @@ static void digi_set_termios(struct usb_serial_port *port, digi_set_modem_signals(port, modem_signals, 1); } switch (baud) { - /* drop DTR and RTS on transition to B0 */ - case 0: digi_set_modem_signals(port, 0, 1); break; - case 50: arg = DIGI_BAUD_50; break; - case 75: arg = DIGI_BAUD_75; break; - case 110: arg = DIGI_BAUD_110; break; - case 150: arg = DIGI_BAUD_150; break; - case 200: arg = DIGI_BAUD_200; break; - case 300: arg = DIGI_BAUD_300; break; - case 600: arg = DIGI_BAUD_600; break; - case 1200: arg = DIGI_BAUD_1200; break; - case 1800: arg = DIGI_BAUD_1800; break; - case 2400: arg = DIGI_BAUD_2400; break; - case 4800: arg = DIGI_BAUD_4800; break; - case 9600: arg = DIGI_BAUD_9600; break; - case 19200: arg = DIGI_BAUD_19200; break; - case 38400: arg = DIGI_BAUD_38400; break; - case 57600: arg = DIGI_BAUD_57600; break; - case 115200: arg = DIGI_BAUD_115200; break; - case 230400: arg = DIGI_BAUD_230400; break; - case 460800: arg = DIGI_BAUD_460800; break; - default: - arg = DIGI_BAUD_9600; - baud = 9600; - break; + /* drop DTR and RTS on transition to B0 */ + case 0: digi_set_modem_signals(port, 0, 1); break; + case 50: arg = DIGI_BAUD_50; break; + case 75: arg = DIGI_BAUD_75; break; + case 110: arg = DIGI_BAUD_110; break; + case 150: arg = DIGI_BAUD_150; break; + case 200: arg = DIGI_BAUD_200; break; + case 300: arg = DIGI_BAUD_300; break; + case 600: arg = DIGI_BAUD_600; break; + case 1200: arg = DIGI_BAUD_1200; break; + case 1800: arg = DIGI_BAUD_1800; break; + case 2400: arg = DIGI_BAUD_2400; break; + case 4800: arg = DIGI_BAUD_4800; break; + case 9600: arg = DIGI_BAUD_9600; break; + case 19200: arg = DIGI_BAUD_19200; break; + case 38400: arg = DIGI_BAUD_38400; break; + case 57600: arg = DIGI_BAUD_57600; break; + case 115200: arg = DIGI_BAUD_115200; break; + case 230400: arg = DIGI_BAUD_230400; break; + case 460800: arg = DIGI_BAUD_460800; break; + default: + arg = DIGI_BAUD_9600; + baud = 9600; + break; } if (arg != -1) { buf[i++] = DIGI_CMD_SET_BAUD_RATE; @@ -1083,14 +1091,16 @@ static void digi_set_termios(struct usb_serial_port *port, buf[i++] = arg; buf[i++] = 0; } - if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0) + ret = digi_write_oob_command(port, buf, i, 1); + if (ret != 0) dbg("digi_set_termios: write oob failed, ret=%d", ret); tty_encode_baud_rate(tty, baud, baud); } -static void digi_break_ctl(struct usb_serial_port *port, int break_state) +static void digi_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; unsigned char buf[4]; buf[0] = DIGI_CMD_BREAK_CONTROL; @@ -1101,8 +1111,9 @@ static void digi_break_ctl(struct usb_serial_port *port, int break_state) } -static int digi_tiocmget(struct usb_serial_port *port, struct file *file) +static int digi_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); unsigned int val; unsigned long flags; @@ -1116,9 +1127,10 @@ static int digi_tiocmget(struct usb_serial_port *port, struct file *file) } -static int digi_tiocmset(struct usb_serial_port *port, struct file *file, +static int digi_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); unsigned int val; unsigned long flags; @@ -1132,30 +1144,11 @@ static int digi_tiocmset(struct usb_serial_port *port, struct file *file, } -static int digi_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct digi_port *priv = usb_get_serial_port_data(port); - dbg("digi_ioctl: TOP: port=%d, cmd=0x%x", priv->dp_port_num, cmd); - - switch (cmd) { - case TIOCMIWAIT: - /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ - /* TODO */ - return 0; - case TIOCGICOUNT: - /* return count of modemline transitions */ - /* TODO */ - return 0; - } - return -ENOIOCTLCMD; - -} - -static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count) +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { - int ret,data_len,new_len; + int ret, data_len, new_len; struct digi_port *priv = usb_get_serial_port_data(port); unsigned char *data = port->write_urb->transfer_buffer; unsigned long flags = 0; @@ -1173,7 +1166,8 @@ static int digi_write(struct usb_serial_port *port, const unsigned char *buf, in spin_lock_irqsave(&priv->dp_port_lock, flags); /* wait for urb status clear to submit another urb */ - if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) { + if (port->write_urb->status == -EINPROGRESS || + priv->dp_write_urb_in_use) { /* buffer data if count is 1 (probably put_char) if possible */ if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) { priv->dp_out_buf[priv->dp_out_buf_len++] = *buf; @@ -1208,7 +1202,8 @@ static int digi_write(struct usb_serial_port *port, const unsigned char *buf, in /* copy in new data */ memcpy(data, buf, new_len); - if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { priv->dp_write_urb_in_use = 1; ret = new_len; priv->dp_out_buf_len = 0; @@ -1222,7 +1217,7 @@ static int digi_write(struct usb_serial_port *port, const unsigned char *buf, in dbg("digi_write: returning %d", ret); return ret; -} +} static void digi_write_bulk_callback(struct urb *urb) { @@ -1237,13 +1232,13 @@ static void digi_write_bulk_callback(struct urb *urb) dbg("digi_write_bulk_callback: TOP, urb->status=%d", status); /* port and serial sanity check */ - if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) { + if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { err("%s: port or port->private is NULL, status=%d", __func__, status); return; } serial = port->serial; - if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) { + if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) { err("%s: serial or serial->private is NULL, status=%d", __func__, status); return; @@ -1262,17 +1257,19 @@ static void digi_write_bulk_callback(struct urb *urb) /* try to send any buffered data on this port, if it is open */ spin_lock(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - if (port->open_count && port->write_urb->status != -EINPROGRESS + if (port->port.count && port->write_urb->status != -EINPROGRESS && priv->dp_out_buf_len > 0) { *((unsigned char *)(port->write_urb->transfer_buffer)) = (unsigned char)DIGI_CMD_SEND_DATA; - *((unsigned char *)(port->write_urb->transfer_buffer)+1) + *((unsigned char *)(port->write_urb->transfer_buffer) + 1) = (unsigned char)priv->dp_out_buf_len; - port->write_urb->transfer_buffer_length = priv->dp_out_buf_len+2; + port->write_urb->transfer_buffer_length = + priv->dp_out_buf_len + 2; port->write_urb->dev = serial->dev; - memcpy(port->write_urb->transfer_buffer+2, priv->dp_out_buf, + memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf, priv->dp_out_buf_len); - if ((ret = usb_submit_urb(port->write_urb, GFP_ATOMIC)) == 0) { + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { priv->dp_write_urb_in_use = 1; priv->dp_out_buf_len = 0; } @@ -1289,16 +1286,17 @@ static void digi_write_bulk_callback(struct urb *urb) __func__, ret, priv->dp_port_num); } -static int digi_write_room(struct usb_serial_port *port) +static int digi_write_room(struct tty_struct *tty) { - - int room; + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); + int room; unsigned long flags = 0; spin_lock_irqsave(&priv->dp_port_lock, flags); - if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) + if (port->write_urb->status == -EINPROGRESS || + priv->dp_write_urb_in_use) room = 0; else room = port->bulk_out_size - 2 - priv->dp_out_buf_len; @@ -1309,12 +1307,11 @@ static int digi_write_room(struct usb_serial_port *port) } -static int digi_chars_in_buffer(struct usb_serial_port *port) +static int digi_chars_in_buffer(struct tty_struct *tty) { - + struct usb_serial_port *port = tty->driver_data; struct digi_port *priv = usb_get_serial_port_data(port); - if (port->write_urb->status == -EINPROGRESS || priv->dp_write_urb_in_use) { dbg("digi_chars_in_buffer: port=%d, chars=%d", @@ -1330,7 +1327,8 @@ static int digi_chars_in_buffer(struct usb_serial_port *port) } -static int digi_open(struct usb_serial_port *port, struct file *filp) +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { int ret; unsigned char buf[32]; @@ -1339,7 +1337,7 @@ static int digi_open(struct usb_serial_port *port, struct file *filp) unsigned long flags = 0; dbg("digi_open: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->open_count); + priv->dp_port_num, port->port.count); /* be sure the device is started up */ if (digi_startup_device(port->serial) != 0) @@ -1354,7 +1352,7 @@ static int digi_open(struct usb_serial_port *port, struct file *filp) } /* wait for a close in progress to finish */ - while(priv->dp_in_close) { + while (priv->dp_in_close) { cond_wait_interruptible_timeout_irqrestore( &priv->dp_close_wait, DIGI_RETRY_TIMEOUT, &priv->dp_port_lock, flags); @@ -1364,7 +1362,7 @@ static int digi_open(struct usb_serial_port *port, struct file *filp) } spin_unlock_irqrestore(&priv->dp_port_lock, flags); - + /* read modem signals automatically whenever they change */ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; buf[1] = priv->dp_port_num; @@ -1377,13 +1375,16 @@ static int digi_open(struct usb_serial_port *port, struct file *filp) buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; buf[7] = 0; - if ((ret = digi_write_oob_command(port, buf, 8, 1)) != 0) + ret = digi_write_oob_command(port, buf, 8, 1); + if (ret != 0) dbg("digi_open: write oob failed, ret=%d", ret); /* set termios settings */ - not_termios.c_cflag = ~port->tty->termios->c_cflag; - not_termios.c_iflag = ~port->tty->termios->c_iflag; - digi_set_termios(port, ¬_termios); + if (tty) { + not_termios.c_cflag = ~tty->termios->c_cflag; + not_termios.c_iflag = ~tty->termios->c_iflag; + digi_set_termios(tty, port, ¬_termios); + } /* set DTR and RTS */ digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1); @@ -1392,16 +1393,16 @@ static int digi_open(struct usb_serial_port *port, struct file *filp) } -static void digi_close(struct usb_serial_port *port, struct file *filp) +static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { DEFINE_WAIT(wait); int ret; unsigned char buf[32]; - struct tty_struct *tty = port->tty; struct digi_port *priv = usb_get_serial_port_data(port); dbg("digi_close: TOP: port=%d, open_count=%d", - priv->dp_port_num, port->open_count); + priv->dp_port_num, port->port.count); mutex_lock(&port->serial->disc_mutex); /* if disconnected, just clear flags */ @@ -1426,9 +1427,8 @@ static void digi_close(struct usb_serial_port *port, struct file *filp) if (port->serial->dev) { /* wait for transmit idle */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { + if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - } /* drop DTR and RTS */ digi_set_modem_signals(port, 0, 0); @@ -1462,11 +1462,13 @@ static void digi_close(struct usb_serial_port *port, struct file *filp) buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; buf[19] = 0; - if ((ret = digi_write_oob_command(port, buf, 20, 0)) != 0) + ret = digi_write_oob_command(port, buf, 20, 0); + if (ret != 0) dbg("digi_close: write oob failed, ret=%d", ret); /* wait for final commands on oob port to complete */ - prepare_to_wait(&priv->dp_flush_wait, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait(&priv->dp_flush_wait, &wait, + TASK_INTERRUPTIBLE); schedule_timeout(DIGI_CLOSE_TIMEOUT); finish_wait(&priv->dp_flush_wait, &wait); @@ -1486,15 +1488,15 @@ exit: /* -* Digi Startup Device -* -* Starts reads on all ports. Must be called AFTER startup, with -* urbs initialized. Returns 0 if successful, non-zero error otherwise. -*/ + * Digi Startup Device + * + * Starts reads on all ports. Must be called AFTER startup, with + * urbs initialized. Returns 0 if successful, non-zero error otherwise. + */ static int digi_startup_device(struct usb_serial *serial) { - int i,ret = 0; + int i, ret = 0; struct digi_serial *serial_priv = usb_get_serial_data(serial); struct usb_serial_port *port; @@ -1512,7 +1514,8 @@ static int digi_startup_device(struct usb_serial *serial) for (i = 0; i < serial->type->num_ports + 1; i++) { port = serial->port[i]; port->write_urb->dev = port->serial->dev; - if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) { + ret = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (ret != 0) { err("%s: usb_submit_urb failed, ret=%d, port=%d", __func__, ret, i); break; @@ -1533,7 +1536,7 @@ static int digi_startup(struct usb_serial *serial) /* allocate the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ - for(i = 0; i < serial->type->num_ports + 1; i++) { + for (i = 0; i < serial->type->num_ports + 1; i++) { /* allocate port private structure */ priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL); if (priv == NULL) { @@ -1596,7 +1599,7 @@ static void digi_shutdown(struct usb_serial *serial) /* free the private data structures for all ports */ /* number of regular ports + 1 for the out-of-band port */ - for(i = 0; i < serial->type->num_ports + 1; i++) + for (i = 0; i < serial->type->num_ports + 1; i++) kfree(usb_get_serial_port_data(serial->port[i])); kfree(usb_get_serial_data(serial)); } @@ -1619,7 +1622,7 @@ static void digi_read_bulk_callback(struct urb *urb) return; } if (port->serial == NULL || - (serial_priv=usb_get_serial_data(port->serial)) == NULL) { + (serial_priv = usb_get_serial_data(port->serial)) == NULL) { err("%s: serial is bad or serial->private is NULL, status=%d", __func__, status); return; @@ -1643,45 +1646,46 @@ static void digi_read_bulk_callback(struct urb *urb) /* continue read */ urb->dev = port->serial->dev; - if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret != 0) { err("%s: failed resubmitting urb, ret=%d, port=%d", __func__, ret, priv->dp_port_num); } } -/* -* Digi Read INB Callback -* -* Digi Read INB Callback handles reads on the in band ports, sending -* the data on to the tty subsystem. When called we know port and -* port->private are not NULL and port->serial has been validated. -* It returns 0 if successful, 1 if successful but the port is -* throttled, and -1 if the sanity checks failed. -*/ +/* + * Digi Read INB Callback + * + * Digi Read INB Callback handles reads on the in band ports, sending + * the data on to the tty subsystem. When called we know port and + * port->private are not NULL and port->serial has been validated. + * It returns 0 if successful, 1 if successful but the port is + * throttled, and -1 if the sanity checks failed. + */ static int digi_read_inb_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; struct digi_port *priv = usb_get_serial_port_data(port); int opcode = ((unsigned char *)urb->transfer_buffer)[0]; int len = ((unsigned char *)urb->transfer_buffer)[1]; int port_status = ((unsigned char *)urb->transfer_buffer)[2]; - unsigned char *data = ((unsigned char *)urb->transfer_buffer)+3; - int flag,throttled; + unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3; + int flag, throttled; int i; int status = urb->status; /* do not process callbacks on closed ports */ /* but do continue the read chain */ - if (port->open_count == 0) + if (port->port.count == 0) return 0; /* short/multiple packet check */ if (urb->actual_length != len + 2) { - err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, " + err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, " "port=%d, opcode=%d, len=%d, actual_length=%d, " "status=%d", __func__, status, priv->dp_port_num, opcode, len, urb->actual_length, port_status); @@ -1723,8 +1727,9 @@ static int digi_read_inb_callback(struct urb *urb) if (flag == TTY_NORMAL) tty_insert_flip_string(tty, data, len); else { - for(i = 0; i < len; i++) - tty_insert_flip_char(tty, data[i], flag); + for (i = 0; i < len; i++) + tty_insert_flip_char(tty, + data[i], flag); } tty_flip_buffer_push(tty); } @@ -1736,19 +1741,19 @@ static int digi_read_inb_callback(struct urb *urb) else if (opcode != DIGI_CMD_RECEIVE_DATA) dbg("%s: unknown opcode: %d", __func__, opcode); - return(throttled ? 1 : 0); + return throttled ? 1 : 0; } -/* -* Digi Read OOB Callback -* -* Digi Read OOB Callback handles reads on the out of band port. -* When called we know port and port->private are not NULL and -* the port->serial is valid. It returns 0 if successful, and -* -1 if the sanity checks failed. -*/ +/* + * Digi Read OOB Callback + * + * Digi Read OOB Callback handles reads on the out of band port. + * When called we know port and port->private are not NULL and + * the port->serial is valid. It returns 0 if successful, and + * -1 if the sanity checks failed. + */ static int digi_read_oob_callback(struct urb *urb) { @@ -1758,12 +1763,13 @@ static int digi_read_oob_callback(struct urb *urb) struct digi_port *priv = usb_get_serial_port_data(port); int opcode, line, status, val; int i; + unsigned int rts; dbg("digi_read_oob_callback: port=%d, len=%d", priv->dp_port_num, urb->actual_length); /* handle each oob command */ - for(i = 0; i < urb->actual_length - 3;) { + for (i = 0; i < urb->actual_length - 3;) { opcode = ((unsigned char *)urb->transfer_buffer)[i++]; line = ((unsigned char *)urb->transfer_buffer)[i++]; status = ((unsigned char *)urb->transfer_buffer)[i++]; @@ -1777,27 +1783,29 @@ static int digi_read_oob_callback(struct urb *urb) port = serial->port[line]; - if ((priv=usb_get_serial_port_data(port)) == NULL) + priv = usb_get_serial_port_data(port); + if (priv == NULL) return -1; + rts = 0; + if (port->port.count) + rts = port->port.tty->termios->c_cflag & CRTSCTS; + if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) { spin_lock(&priv->dp_port_lock); /* convert from digi flags to termiox flags */ if (val & DIGI_READ_INPUT_SIGNALS_CTS) { priv->dp_modem_signals |= TIOCM_CTS; /* port must be open to use tty struct */ - if (port->open_count - && port->tty->termios->c_cflag & CRTSCTS) { - port->tty->hw_stopped = 0; + if (rts) { + port->port.tty->hw_stopped = 0; digi_wakeup_write(port); } } else { priv->dp_modem_signals &= ~TIOCM_CTS; /* port must be open to use tty struct */ - if (port->open_count - && port->tty->termios->c_cflag & CRTSCTS) { - port->tty->hw_stopped = 1; - } + if (rts) + port->port.tty->hw_stopped = 1; } if (val & DIGI_READ_INPUT_SIGNALS_DSR) priv->dp_modem_signals |= TIOCM_DSR; @@ -1834,7 +1842,7 @@ static int __init digi_init(void) if (retval) goto failed_acceleport_2_device; retval = usb_serial_register(&digi_acceleport_4_device); - if (retval) + if (retval) goto failed_acceleport_4_device; retval = usb_register(&digi_driver); if (retval) diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index c5ec309a3cb..a6ab5b58d9c 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -11,36 +11,39 @@ * it under the terms of the GNU General Public License, as published by * the Free Software Foundation, version 2. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * * (07/16/2001) gb - * remove unused code in empeg_close() (thanks to Oliver Neukum for pointing this - * out) and rewrote empeg_set_termios(). - * + * remove unused code in empeg_close() (thanks to Oliver Neukum for + * pointing this out) and rewrote empeg_set_termios(). + * * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. - * + * * (01/22/2001) gb - * Added write_room() and chars_in_buffer() support. - * + * Added write_room() and chars_in_buffer() support. + * * (12/21/2000) gb * Moved termio stuff inside the port->active check. * Moved MOD_DEC_USE_COUNT to end of empeg_close(). - * + * * (12/03/2000) gb - * Added port->tty->ldisc.set_termios(port->tty, NULL) to empeg_open() - * This notifies the tty driver that the termios have changed. - * + * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to + * empeg_open(). This notifies the tty driver that the termios have + * changed. + * * (11/13/2000) gb - * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to empeg_open() - * (It only needs to be set once - Doh!) - * + * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to + * empeg_open() (It only needs to be set once - Doh!) + * * (11/11/2000) gb * Updated to work with id_table structure. - * + * * (11/04/2000) gb * Forked this from visor.c, and hacked it up to work with an * Empeg ltd. empeg-car player. Constructive criticism welcomed. @@ -48,7 +51,7 @@ * use of his code, and for his guidance, advice and patience. :) * A 'Thank You' is in order for John Ripley of Empeg ltd for his * advice, and patience too. - * + * */ #include <linux/kernel.h> @@ -60,7 +63,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -77,31 +80,30 @@ static int debug; #define EMPEG_PRODUCT_ID 0x0001 /* function prototypes for an empeg-car player */ -static int empeg_open (struct usb_serial_port *port, struct file *filp); -static void empeg_close (struct usb_serial_port *port, struct file *filp); -static int empeg_write (struct usb_serial_port *port, - const unsigned char *buf, - int count); -static int empeg_write_room (struct usb_serial_port *port); -static int empeg_chars_in_buffer (struct usb_serial_port *port); -static void empeg_throttle (struct usb_serial_port *port); -static void empeg_unthrottle (struct usb_serial_port *port); -static int empeg_startup (struct usb_serial *serial); -static void empeg_shutdown (struct usb_serial *serial); -static int empeg_ioctl (struct usb_serial_port *port, - struct file * file, - unsigned int cmd, - unsigned long arg); -static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios); -static void empeg_write_bulk_callback (struct urb *urb); -static void empeg_read_bulk_callback (struct urb *urb); +static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, + int count); +static int empeg_write_room(struct tty_struct *tty); +static int empeg_chars_in_buffer(struct tty_struct *tty); +static void empeg_throttle(struct tty_struct *tty); +static void empeg_unthrottle(struct tty_struct *tty); +static int empeg_startup(struct usb_serial *serial); +static void empeg_shutdown(struct usb_serial *serial); +static void empeg_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void empeg_write_bulk_callback(struct urb *urb); +static void empeg_read_bulk_callback(struct urb *urb); static struct usb_device_id id_table [] = { { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver empeg_driver = { .name = "empeg", @@ -125,7 +127,6 @@ static struct usb_serial_driver empeg_device = { .unthrottle = empeg_unthrottle, .attach = empeg_startup, .shutdown = empeg_shutdown, - .ioctl = empeg_ioctl, .set_termios = empeg_set_termios, .write = empeg_write, .write_room = empeg_write_room, @@ -145,7 +146,8 @@ static int bytes_out; /****************************************************************************** * Empeg specific driver functions ******************************************************************************/ -static int empeg_open (struct usb_serial_port *port, struct file *filp) +static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct usb_serial *serial = port->serial; int result = 0; @@ -153,7 +155,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); /* Force default termio settings */ - empeg_set_termios (port, NULL) ; + empeg_set_termios(tty, port, NULL) ; bytes_in = 0; bytes_out = 0; @@ -161,7 +163,7 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) /* Start reading from the device */ usb_fill_bulk_urb( port->read_urb, - serial->dev, + serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -172,13 +174,16 @@ static int empeg_open (struct usb_serial_port *port, struct file *filp) result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; } -static void empeg_close (struct usb_serial_port *port, struct file * filp) +static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { dbg("%s - port %d", __func__, port->number); @@ -189,7 +194,8 @@ static void empeg_close (struct usb_serial_port *port, struct file * filp) } -static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct urb *urb; @@ -203,11 +209,10 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, dbg("%s - port %d", __func__, port->number); while (count > 0) { - /* try to find a free urb in our list of them */ urb = NULL; - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status != -EINPROGRESS) { @@ -216,7 +221,7 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, } } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); + spin_unlock_irqrestore(&write_urb_pool_lock, flags); if (urb == NULL) { dbg("%s - no more free urbs", __func__); @@ -224,25 +229,27 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", __func__); + dev_err(&port->dev, + "%s no more kernel memory...\n", + __func__); goto exit; } } - transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); - memcpy (urb->transfer_buffer, current_position, transfer_size); + memcpy(urb->transfer_buffer, current_position, transfer_size); usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); /* build up our urb */ - usb_fill_bulk_urb ( + usb_fill_bulk_urb( urb, serial->dev, usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), + port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, empeg_write_bulk_callback, @@ -262,66 +269,57 @@ static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, bytes_out += transfer_size; } - exit: return bytes_sent; - -} +} -static int empeg_write_room (struct usb_serial_port *port) +static int empeg_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; int i; int room = 0; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave (&write_urb_pool_lock, flags); - + spin_lock_irqsave(&write_urb_pool_lock, flags); /* tally up the number of bytes available */ for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status != -EINPROGRESS) { + if (write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; - } - } - - spin_unlock_irqrestore (&write_urb_pool_lock, flags); - + } + spin_unlock_irqrestore(&write_urb_pool_lock, flags); dbg("%s - returns %d", __func__, room); - - return (room); + return room; } -static int empeg_chars_in_buffer (struct usb_serial_port *port) +static int empeg_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; int i; int chars = 0; dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); /* tally up the number of bytes waiting */ for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status == -EINPROGRESS) { + if (write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&write_urb_pool_lock, flags); - + spin_unlock_irqrestore(&write_urb_pool_lock, flags); dbg("%s - returns %d", __func__, chars); - - return (chars); - + return chars; } -static void empeg_write_bulk_callback (struct urb *urb) +static void empeg_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -338,7 +336,7 @@ static void empeg_write_bulk_callback (struct urb *urb) } -static void empeg_read_bulk_callback (struct urb *urb) +static void empeg_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct tty_struct *tty; @@ -354,9 +352,9 @@ static void empeg_read_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - - tty = port->tty; + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); + tty = port->port.tty; if (urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); @@ -368,7 +366,7 @@ static void empeg_read_bulk_callback (struct urb *urb) /* Continue trying to always read */ usb_fill_bulk_urb( port->read_urb, - port->serial->dev, + port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -379,38 +377,39 @@ static void empeg_read_bulk_callback (struct urb *urb) result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&urb->dev->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; } -static void empeg_throttle (struct usb_serial_port *port) +static void empeg_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } -static void empeg_unthrottle (struct usb_serial_port *port) +static void empeg_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int result; - dbg("%s - port %d", __func__, port->number); port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - - return; + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); } -static int empeg_startup (struct usb_serial *serial) +static int empeg_startup(struct usb_serial *serial) { int r; @@ -422,7 +421,7 @@ static int empeg_startup (struct usb_serial *serial) return -ENODEV; } dbg("%s - reset config", __func__); - r = usb_reset_configuration (serial->dev); + r = usb_reset_configuration(serial->dev); /* continue on with initialization */ return r; @@ -430,34 +429,27 @@ static int empeg_startup (struct usb_serial *serial) } -static void empeg_shutdown (struct usb_serial *serial) +static void empeg_shutdown(struct usb_serial *serial) { - dbg ("%s", __func__); -} - - -static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) -{ - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - - return -ENOIOCTLCMD; + dbg("%s", __func__); } -static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void empeg_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - struct ktermios *termios = port->tty->termios; + struct ktermios *termios = tty->termios; dbg("%s - port %d", __func__, port->number); /* - * The empeg-car player wants these particular tty settings. - * You could, for example, change the baud rate, however the - * player only supports 115200 (currently), so there is really - * no point in support for changes to the tty settings. - * (at least for now) - * - * The default requirements for this device are: - */ + * The empeg-car player wants these particular tty settings. + * You could, for example, change the baud rate, however the + * player only supports 115200 (currently), so there is really + * no point in support for changes to the tty settings. + * (at least for now) + * + * The default requirements for this device are: + */ termios->c_iflag &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ @@ -491,18 +483,18 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol * this is bad as it opens up the possibility of dropping bytes * on the floor. We don't want to drop bytes on the floor. :) */ - port->tty->low_latency = 1; - tty_encode_baud_rate(port->tty, 115200, 115200); + tty->low_latency = 1; + tty_encode_baud_rate(tty, 115200, 115200); } -static int __init empeg_init (void) +static int __init empeg_init(void) { struct urb *urb; int i, retval; - /* create our write urb pool and transfer buffers */ - spin_lock_init (&write_urb_pool_lock); + /* create our write urb pool and transfer buffers */ + spin_lock_init(&write_urb_pool_lock); for (i = 0; i < NUM_URBS; ++i) { urb = usb_alloc_urb(0, GFP_KERNEL); write_urb_pool[i] = urb; @@ -511,9 +503,10 @@ static int __init empeg_init (void) continue; } - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", + err("%s - out of memory for urb buffers.", __func__); continue; } @@ -542,36 +535,36 @@ failed_usb_serial_register: } -static void __exit empeg_exit (void) +static void __exit empeg_exit(void) { int i; unsigned long flags; usb_deregister(&empeg_driver); - usb_serial_deregister (&empeg_device); + usb_serial_deregister(&empeg_device); - spin_lock_irqsave (&write_urb_pool_lock, flags); + spin_lock_irqsave(&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]) { - /* FIXME - uncomment the following usb_kill_urb call when - * the host controllers get fixed to set urb->dev = NULL after - * the urb is finished. Otherwise this call oopses. */ + /* FIXME - uncomment the following usb_kill_urb call + * when the host controllers get fixed to set urb->dev + * = NULL after the urb is finished. Otherwise this + * call oopses. */ /* usb_kill_urb(write_urb_pool[i]); */ kfree(write_urb_pool[i]->transfer_buffer); - usb_free_urb (write_urb_pool[i]); + usb_free_urb(write_urb_pool[i]); } } - - spin_unlock_irqrestore (&write_urb_pool_lock, flags); + spin_unlock_irqrestore(&write_urb_pool_lock, flags); } module_init(empeg_init); module_exit(empeg_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index cc4fbd9d60b..711e84f6ed8 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -20,7 +20,8 @@ /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define CPUCS_REG 0x7F92 -int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest) +int ezusb_writememory(struct usb_serial *serial, int address, + unsigned char *data, int length, __u8 request) { int result; unsigned char *transfer_buffer; @@ -33,26 +34,27 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, length); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, length); return -ENOMEM; } - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); - kfree (transfer_buffer); + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + request, 0x40, address, 0, transfer_buffer, length, 3000); + kfree(transfer_buffer); return result; } +EXPORT_SYMBOL_GPL(ezusb_writememory); -int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit) +int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit) { int response; /* dbg("%s - %d", __func__, reset_bit); */ - response = ezusb_writememory (serial, CPUCS_REG, &reset_bit, 1, 0xa0); + response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0); if (response < 0) - dev_err(&serial->dev->dev, "%s- %d failed\n", __func__, reset_bit); + dev_err(&serial->dev->dev, "%s- %d failed\n", + __func__, reset_bit); return response; } - - -EXPORT_SYMBOL_GPL(ezusb_writememory); EXPORT_SYMBOL_GPL(ezusb_set_reset); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0ff4a3971e4..83871725014 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -12,7 +12,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * See http://ftdi-usb-sio.sourceforge.net for upto date testing info * and extra documentation @@ -25,7 +26,8 @@ /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ /* Thanx to FTDI for so kindly providing details of the protocol required */ /* to talk to the device */ -/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */ +/* Thanx to gkh and the rest of the usb dev group for all code I have + assimilated :-) */ #include <linux/kernel.h> #include <linux/errno.h> @@ -36,7 +38,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/serial.h> #include <linux/usb/serial.h> @@ -55,17 +57,22 @@ static __u16 product; struct ftdi_private { ftdi_chip_type_t chip_type; - /* type of the device, either SIO or FT8U232AM */ + /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ - int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ + int custom_divisor; /* custom_divisor kludge, this is for + baud_base (different from what goes to the + chip!) */ __u16 last_set_data_urb_value ; - /* the last data state set - needed for doing a break */ - int write_offset; /* This is the offset in the usb data block to write the serial data - - * it is different between devices + /* the last data state set - needed for doing + * a break + */ + int write_offset; /* This is the offset in the usb data block to + * write the serial data - it varies between + * devices */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ - wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ @@ -76,8 +83,10 @@ struct ftdi_private { __u16 interface; /* FT2232C port interface (0 for FT232/245) */ - speed_t force_baud; /* if non-zero, force the baud rate to this value */ - int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + speed_t force_baud; /* if non-zero, force the baud rate to + this value */ + int force_rtscts; /* if non-zero, force RTS-CTS to always + be enabled */ spinlock_t tx_lock; /* spinlock for transmit state */ unsigned long tx_bytes; @@ -88,13 +97,14 @@ struct ftdi_private { /* struct ftdi_sio_quirk is used by devices requiring special attention. */ struct ftdi_sio_quirk { int (*probe)(struct usb_serial *); - void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */ + /* Special settings for probed ports. */ + void (*port_probe)(struct ftdi_private *); }; -static int ftdi_jtag_probe (struct usb_serial *serial); -static int ftdi_mtxorb_hack_setup (struct usb_serial *serial); -static void ftdi_USB_UIRT_setup (struct ftdi_private *priv); -static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv); +static int ftdi_jtag_probe(struct usb_serial *serial); +static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); +static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); +static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); static struct ftdi_sio_quirk ftdi_jtag_quirk = { .probe = ftdi_jtag_probe, @@ -174,270 +184,270 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID), + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) }, - { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, @@ -642,7 +652,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver ftdi_driver = { .name = "ftdi_sio", @@ -678,30 +688,37 @@ static const char *ftdi_chip_name[] = { | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP) /* function prototypes for a FTDI serial converter */ -static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id); -static void ftdi_shutdown (struct usb_serial *serial); -static int ftdi_sio_port_probe (struct usb_serial_port *port); -static int ftdi_sio_port_remove (struct usb_serial_port *port); -static int ftdi_open (struct usb_serial_port *port, struct file *filp); -static void ftdi_close (struct usb_serial_port *port, struct file *filp); -static int ftdi_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int ftdi_write_room (struct usb_serial_port *port); -static int ftdi_chars_in_buffer (struct usb_serial_port *port); -static void ftdi_write_bulk_callback (struct urb *urb); -static void ftdi_read_bulk_callback (struct urb *urb); -static void ftdi_process_read (struct work_struct *work); -static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios * old); -static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); -static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); -static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void ftdi_break_ctl (struct usb_serial_port *port, int break_state ); -static void ftdi_throttle (struct usb_serial_port *port); -static void ftdi_unthrottle (struct usb_serial_port *port); - -static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base); -static unsigned short int ftdi_232am_baud_to_divisor (int baud); -static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); -static __u32 ftdi_232bm_baud_to_divisor (int baud); +static int ftdi_sio_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static void ftdi_shutdown(struct usb_serial *serial); +static int ftdi_sio_port_probe(struct usb_serial_port *port); +static int ftdi_sio_port_remove(struct usb_serial_port *port); +static int ftdi_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void ftdi_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int ftdi_write_room(struct tty_struct *tty); +static int ftdi_chars_in_buffer(struct tty_struct *tty); +static void ftdi_write_bulk_callback(struct urb *urb); +static void ftdi_read_bulk_callback(struct urb *urb); +static void ftdi_process_read(struct work_struct *work); +static void ftdi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int ftdi_tiocmget(struct tty_struct *tty, struct file *file); +static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static int ftdi_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void ftdi_break_ctl(struct tty_struct *tty, int break_state); +static void ftdi_throttle(struct tty_struct *tty); +static void ftdi_unthrottle(struct tty_struct *tty); + +static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); +static unsigned short int ftdi_232am_baud_to_divisor(int baud); +static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); +static __u32 ftdi_232bm_baud_to_divisor(int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { @@ -752,44 +769,54 @@ static struct usb_serial_driver ftdi_sio_device = { static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) { unsigned short int divisor; - int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left - if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1 + /* divisor shifted 3 bits to the left */ + int divisor3 = base / 2 / baud; + if ((divisor3 & 0x7) == 7) + divisor3++; /* round x.7/8 up to x+1 */ divisor = divisor3 >> 3; divisor3 &= 0x7; - if (divisor3 == 1) divisor |= 0xc000; else // 0.125 - if (divisor3 >= 4) divisor |= 0x4000; else // 0.5 - if (divisor3 != 0) divisor |= 0x8000; // 0.25 - if (divisor == 1) divisor = 0; /* special case for maximum baud rate */ + if (divisor3 == 1) + divisor |= 0xc000; + else if (divisor3 >= 4) + divisor |= 0x4000; + else if (divisor3 != 0) + divisor |= 0x8000; + else if (divisor == 1) + divisor = 0; /* special case for maximum baud rate */ return divisor; } static unsigned short int ftdi_232am_baud_to_divisor(int baud) { - return(ftdi_232am_baud_base_to_divisor(baud, 48000000)); + return ftdi_232am_baud_base_to_divisor(baud, 48000000); } static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) { static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; __u32 divisor; - int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left + /* divisor shifted 3 bits to the left */ + int divisor3 = base / 2 / baud; divisor = divisor3 >> 3; divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ - if (divisor == 1) divisor = 0; else // 1.0 - if (divisor == 0x4001) divisor = 1; // 1.5 + if (divisor == 1) + divisor = 0; + else if (divisor == 0x4001) + divisor = 1; return divisor; } static __u32 ftdi_232bm_baud_to_divisor(int baud) { - return(ftdi_232bm_baud_base_to_divisor(baud, 48000000)); + return ftdi_232bm_baud_base_to_divisor(baud, 48000000); } #define set_mctrl(port, set) update_mctrl((port), (set), 0) #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear)) -static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) +static int update_mctrl(struct usb_serial_port *port, unsigned int set, + unsigned int clear) { struct ftdi_private *priv = usb_get_serial_port_data(port); char *buf; @@ -843,42 +870,8 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned } -static __u32 get_ftdi_divisor(struct usb_serial_port * port); - - -static int change_speed(struct usb_serial_port *port) -{ - struct ftdi_private *priv = usb_get_serial_port_data(port); - char *buf; - __u16 urb_value; - __u16 urb_index; - __u32 urb_index_value; - int rv; - - buf = kmalloc(1, GFP_NOIO); - if (!buf) - return -ENOMEM; - - urb_index_value = get_ftdi_divisor(port); - urb_value = (__u16)urb_index_value; - urb_index = (__u16)(urb_index_value >> 16); - if (priv->interface) { /* FT2232C */ - urb_index = (__u16)((urb_index << 8) | priv->interface); - } - - rv = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_BAUDRATE_REQUEST, - FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, - urb_value, urb_index, - buf, 0, WDR_SHORT_TIMEOUT); - - kfree(buf); - return rv; -} - - -static __u32 get_ftdi_divisor(struct usb_serial_port * port) +static __u32 get_ftdi_divisor(struct tty_struct *tty, + struct usb_serial_port *port) { /* get_ftdi_divisor */ struct ftdi_private *priv = usb_get_serial_port_data(port); __u32 div_value = 0; @@ -886,48 +879,56 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) int baud; /* - * The logic involved in setting the baudrate can be cleanly split in 3 steps. - * Obtaining the actual baud rate is a little tricky since unix traditionally - * somehow ignored the possibility to set non-standard baud rates. + * The logic involved in setting the baudrate can be cleanly split into + * 3 steps. * 1. Standard baud rates are set in tty->termios->c_cflag - * 2. If these are not enough, you can set any speed using alt_speed as follows: + * 2. If these are not enough, you can set any speed using alt_speed as + * follows: * - set tty->termios->c_cflag speed to B38400 * - set your real speed in tty->alt_speed; it gets ignored when * alt_speed==0, (or) - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows: - * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just - * sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800) + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as + * follows: + * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], + * this just sets alt_speed to (HI: 57600, VHI: 115200, + * SHI: 230400, WARP: 460800) * ** Steps 1, 2 are done courtesy of tty_get_baud_rate * 3. You can also set baud rate by setting custom divisor as follows * - set tty->termios->c_cflag speed to B38400 - * - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows: + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as + * follows: * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST * o custom_divisor set to baud_base / your_new_baudrate - * ** Step 3 is done courtesy of code borrowed from serial.c - I should really - * spend some time and separate+move this common code to serial.c, it is - * replicated in nearly every serial driver you see. + * ** Step 3 is done courtesy of code borrowed from serial.c + * I should really spend some time and separate + move this common + * code to serial.c, it is replicated in nearly every serial driver + * you see. */ - /* 1. Get the baud rate from the tty settings, this observes alt_speed hack */ + /* 1. Get the baud rate from the tty settings, this observes + alt_speed hack */ - baud = tty_get_baud_rate(port->tty); + baud = tty_get_baud_rate(tty); dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud); - /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */ + /* 2. Observe async-compatible custom_divisor hack, update baudrate + if needed */ if (baud == 38400 && ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (priv->custom_divisor)) { baud = priv->baud_base / priv->custom_divisor; - dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud); + dbg("%s - custom divisor %d sets baud rate to %d", + __func__, priv->custom_divisor, baud); } /* 3. Convert baudrate to device-specific divisor */ - if (!baud) baud = 9600; - switch(priv->chip_type) { + if (!baud) + baud = 9600; + switch (priv->chip_type) { case SIO: /* SIO chip */ - switch(baud) { + switch (baud) { case 300: div_value = ftdi_sio_b300; break; case 600: div_value = ftdi_sio_b600; break; case 1200: div_value = ftdi_sio_b1200; break; @@ -940,7 +941,8 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) case 115200: div_value = ftdi_sio_b115200; break; } /* baud */ if (div_value == 0) { - dbg("%s - Baudrate (%d) requested is not supported", __func__, baud); + dbg("%s - Baudrate (%d) requested is not supported", + __func__, baud); div_value = ftdi_sio_b9600; baud = 9600; div_okay = 0; @@ -950,7 +952,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dbg("%s - Baud rate too high!", __func__); baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; @@ -962,7 +964,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (baud <= 3000000) { div_value = ftdi_232bm_baud_to_divisor(baud); } else { - dbg("%s - Baud rate too high!", __func__); + dbg("%s - Baud rate too high!", __func__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; baud = 9600; @@ -976,12 +978,45 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) ftdi_chip_name[priv->chip_type]); } - tty_encode_baud_rate(port->tty, baud, baud); - return(div_value); + tty_encode_baud_rate(tty, baud, baud); + return div_value; +} + +static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *buf; + __u16 urb_value; + __u16 urb_index; + __u32 urb_index_value; + int rv; + + buf = kmalloc(1, GFP_NOIO); + if (!buf) + return -ENOMEM; + + urb_index_value = get_ftdi_divisor(tty, port); + urb_value = (__u16)urb_index_value; + urb_index = (__u16)(urb_index_value >> 16); + if (priv->interface) { /* FT2232C */ + urb_index = (__u16)((urb_index << 8) | priv->interface); + } + + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_BAUDRATE_REQUEST, + FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, + urb_value, urb_index, + buf, 0, WDR_SHORT_TIMEOUT); + + kfree(buf); + return rv; } -static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo) + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct serial_struct tmp; @@ -998,7 +1033,8 @@ static int get_serial_info(struct usb_serial_port * port, struct serial_struct _ } /* get_serial_info */ -static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo) +static int set_serial_info(struct tty_struct *tty, + struct usb_serial_port *port, struct serial_struct __user *newinfo) { /* set_serial_info */ struct ftdi_private *priv = usb_get_serial_port_data(port); struct serial_struct new_serial; @@ -1006,7 +1042,7 @@ static int set_serial_info(struct usb_serial_port * port, struct serial_struct _ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) return -EFAULT; - old_priv = * priv; + old_priv = *priv; /* Do error checking and permission checking */ @@ -1027,33 +1063,32 @@ static int set_serial_info(struct usb_serial_port * port, struct serial_struct _ /* Make the changes - these are privileged changes! */ priv->flags = ((priv->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); + (new_serial.flags & ASYNC_FLAGS)); priv->custom_divisor = new_serial.custom_divisor; - port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != (priv->flags & ASYNC_SPD_MASK)) { if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - port->tty->alt_speed = 57600; + tty->alt_speed = 57600; else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - port->tty->alt_speed = 115200; + tty->alt_speed = 115200; else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - port->tty->alt_speed = 230400; + tty->alt_speed = 230400; else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - port->tty->alt_speed = 460800; + tty->alt_speed = 460800; else - port->tty->alt_speed = 0; + tty->alt_speed = 0; } if (((old_priv.flags & ASYNC_SPD_MASK) != (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { - change_speed(port); + change_speed(tty, port); } - - return (0); + return 0; } /* set_serial_info */ @@ -1082,11 +1117,10 @@ static void ftdi_determine_type(struct usb_serial_port *port) priv->chip_type = FT2232C; /* Determine interface code. */ inter = serial->interface->altsetting->desc.bInterfaceNumber; - if (inter == 0) { + if (inter == 0) priv->interface = PIT_SIOA; - } else { + else priv->interface = PIT_SIOB; - } /* BM-type devices have a bug where bcdDevice gets set * to 0x200 when iSerialNumber is 0. */ if (version < 0x500) { @@ -1120,7 +1154,8 @@ static void ftdi_determine_type(struct usb_serial_port *port) * *************************************************************************** */ -static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_latency_timer(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1129,14 +1164,14 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a int rv = 0; - dbg("%s",__func__); + dbg("%s", __func__); rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0, priv->interface, - (char*) &latency, 1, WDR_TIMEOUT); + (char *) &latency, 1, WDR_TIMEOUT); if (rv < 0) { dev_err(dev, "Unable to read latency timer: %i\n", rv); @@ -1146,8 +1181,9 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a } /* Write a new value of the latency timer, in units of milliseconds. */ -static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf, - size_t count) +static ssize_t store_latency_timer(struct device *dev, + struct device_attribute *attr, const char *valbuf, + size_t count) { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1175,8 +1211,8 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute * /* Write an event character directly to the FTDI register. The ASCII value is in the low 8 bits, with the enable bit in the 9th bit. */ -static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf, - size_t count) +static ssize_t store_event_char(struct device *dev, + struct device_attribute *attr, const char *valbuf, size_t count) { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1202,7 +1238,8 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att return count; } -static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer); +static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, + store_latency_timer); static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); static int create_sysfs_attrs(struct usb_serial_port *port) @@ -1210,7 +1247,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int retval = 0; - dbg("%s",__func__); + dbg("%s", __func__); /* XXX I've no idea if the original SIO supports the event_char * sysfs parameter, so I'm playing it safe. */ @@ -1232,7 +1269,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - dbg("%s",__func__); + dbg("%s", __func__); /* XXX see create_sysfs_attrs */ if (priv->chip_type != SIO) { @@ -1253,9 +1290,11 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) */ /* Probe function to check for special devices */ -static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id) +static int ftdi_sio_probe(struct usb_serial *serial, + const struct usb_device_id *id) { - struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info; + struct ftdi_sio_quirk *quirk = + (struct ftdi_sio_quirk *)id->driver_info; if (quirk && quirk->probe) { int ret = quirk->probe(serial); @@ -1274,17 +1313,18 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); - dbg("%s",__func__); + dbg("%s", __func__); priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); - if (!priv){ - err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private)); + if (!priv) { + err("%s- kmalloc(%Zd) failed.", __func__, + sizeof(struct ftdi_private)); return -ENOMEM; } spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); - init_waitqueue_head(&priv->delta_msr_wait); + init_waitqueue_head(&priv->delta_msr_wait); /* This will push the characters through immediately rather than queue a task to deliver them */ priv->flags = ASYNC_LOW_LATENCY; @@ -1294,9 +1334,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Increase the size of read buffers */ kfree(port->bulk_in_buffer); - port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL); + port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL); if (!port->bulk_in_buffer) { - kfree (priv); + kfree(priv); return -ENOMEM; } if (port->read_urb) { @@ -1309,7 +1349,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Free port's existing write urb and transfer buffer. */ if (port->write_urb) { - usb_free_urb (port->write_urb); + usb_free_urb(port->write_urb); port->write_urb = NULL; } kfree(port->bulk_out_buffer); @@ -1317,7 +1357,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); - ftdi_determine_type (port); + ftdi_determine_type(port); create_sysfs_attrs(port); return 0; } @@ -1325,9 +1365,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) /* Setup for the USB-UIRT device, which requires hardwired * baudrate (38400 gets mapped to 312500) */ /* Called from usbserial:serial_probe */ -static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) +static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) { - dbg("%s",__func__); + dbg("%s", __func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; @@ -1336,9 +1376,10 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) /* Setup for the HE-TIRA1 device, which requires hardwired * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ -static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) + +static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) { - dbg("%s",__func__); + dbg("%s", __func__); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; @@ -1356,7 +1397,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial) struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - dbg("%s",__func__); + dbg("%s", __func__); if (interface == udev->actconfig->interface[0]) { info("Ignoring serial port reserved for JTAG"); @@ -1390,7 +1431,7 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) * calls __serial_close for each open of the port * shutdown is called then (ie ftdi_shutdown) */ -static void ftdi_shutdown (struct usb_serial *serial) +static void ftdi_shutdown(struct usb_serial *serial) { dbg("%s", __func__); } @@ -1404,7 +1445,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) remove_sysfs_attrs(port); /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) + * (by usbserial.c:__serial_close, which calls ftdi_close) */ if (priv) { @@ -1415,7 +1456,8 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) return 0; } -static int ftdi_open (struct usb_serial_port *port, struct file *filp) +static int ftdi_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { /* ftdi_open */ struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1433,8 +1475,8 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) priv->rx_bytes = 0; spin_unlock_irqrestore(&priv->rx_lock, flags); - if (port->tty) - port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if (tty) + tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ @@ -1448,8 +1490,8 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (port->tty) - ftdi_set_termios(port, port->tty->termios); + if (tty) + ftdi_set_termios(tty, port, tty->termios); /* FIXME: Flow control might be enabled, so it should be checked - we have no control of defaults! */ @@ -1464,12 +1506,14 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) /* Start reading from the device */ priv->rx_processed = 0; usb_fill_bulk_urb(port->read_urb, dev, - usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - ftdi_read_bulk_callback, port); + usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - err("%s - failed submitting read urb, error %d", __func__, result); + err("%s - failed submitting read urb, error %d", + __func__, result); return result; @@ -1485,16 +1529,17 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) * */ -static void ftdi_close (struct usb_serial_port *port, struct file *filp) +static void ftdi_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { /* ftdi_close */ - unsigned int c_cflag = port->tty->termios->c_cflag; + unsigned int c_cflag = tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); char buf[1]; dbg("%s", __func__); mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected){ + if (c_cflag & HUPCL && !port->serial->disconnected) { /* Disable flow control */ if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), @@ -1527,7 +1572,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) * * The new devices do not require this byte */ -static int ftdi_write (struct usb_serial_port *port, +static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { /* ftdi_write */ struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1554,7 +1599,7 @@ static int ftdi_write (struct usb_serial_port *port, spin_unlock_irqrestore(&priv->tx_lock, flags); data_offset = priv->write_offset; - dbg("data_offset set to %d",data_offset); + dbg("data_offset set to %d", data_offset); /* Determine total transfer size */ transfer_size = count; @@ -1565,7 +1610,7 @@ static int ftdi_write (struct usb_serial_port *port, (PKTSZ - data_offset))); } - buffer = kmalloc (transfer_size, GFP_ATOMIC); + buffer = kmalloc(transfer_size, GFP_ATOMIC); if (!buffer) { err("%s ran out of kernel memory for urb ...", __func__); count = -ENOMEM; @@ -1581,20 +1626,20 @@ static int ftdi_write (struct usb_serial_port *port, /* Copy data */ if (data_offset > 0) { - /* Original sio requires control byte at start of each packet. */ + /* Original sio requires control byte at start of + each packet. */ int user_pktsz = PKTSZ - data_offset; int todo = count; unsigned char *first_byte = buffer; const unsigned char *current_position = buf; while (todo > 0) { - if (user_pktsz > todo) { + if (user_pktsz > todo) user_pktsz = todo; - } /* Write the control byte at the front of the packet*/ *first_byte = 1 | ((user_pktsz) << 2); /* Copy data for packet */ - memcpy (first_byte + data_offset, + memcpy(first_byte + data_offset, current_position, user_pktsz); first_byte += user_pktsz + data_offset; current_position += user_pktsz; @@ -1603,20 +1648,23 @@ static int ftdi_write (struct usb_serial_port *port, } else { /* No control byte required. */ /* Copy in the data to send */ - memcpy (buffer, buf, count); + memcpy(buffer, buf, count); } - usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer); + usb_serial_debug_data(debug, &port->dev, __func__, + transfer_size, buffer); /* fill the buffer and send it */ usb_fill_bulk_urb(urb, port->serial->dev, - usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), - buffer, transfer_size, - ftdi_write_bulk_callback, port); + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + buffer, transfer_size, + ftdi_write_bulk_callback, port); status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - err("%s - failed submitting write urb, error %d", __func__, status); + err("%s - failed submitting write urb, error %d", + __func__, status); count = status; goto error; } else { @@ -1635,7 +1683,7 @@ static int ftdi_write (struct usb_serial_port *port, error: usb_free_urb(urb); error_no_urb: - kfree (buffer); + kfree(buffer); error_no_buffer: spin_lock_irqsave(&priv->tx_lock, flags); priv->tx_outstanding_urbs--; @@ -1646,7 +1694,7 @@ error_no_buffer: /* This function may get called when the device is closed */ -static void ftdi_write_bulk_callback (struct urb *urb) +static void ftdi_write_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; @@ -1656,7 +1704,7 @@ static void ftdi_write_bulk_callback (struct urb *urb) int status = urb->status; /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree (urb->transfer_buffer); + kfree(urb->transfer_buffer); dbg("%s - port %d", __func__, port->number); @@ -1686,8 +1734,9 @@ static void ftdi_write_bulk_callback (struct urb *urb) } /* ftdi_write_bulk_callback */ -static int ftdi_write_room( struct usb_serial_port *port ) +static int ftdi_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); int room; unsigned long flags; @@ -1707,11 +1756,11 @@ static int ftdi_write_room( struct usb_serial_port *port ) } spin_unlock_irqrestore(&priv->tx_lock, flags); return room; -} /* ftdi_write_room */ - +} -static int ftdi_chars_in_buffer (struct usb_serial_port *port) -{ /* ftdi_chars_in_buffer */ +static int ftdi_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); int buffered; unsigned long flags; @@ -1726,12 +1775,10 @@ static int ftdi_chars_in_buffer (struct usb_serial_port *port) buffered = 0; } return buffered; -} /* ftdi_chars_in_buffer */ - - +} -static void ftdi_read_bulk_callback (struct urb *urb) -{ /* ftdi_read_bulk_callback */ +static void ftdi_read_bulk_callback(struct urb *urb) +{ struct usb_serial_port *port = urb->context; struct tty_struct *tty; struct ftdi_private *priv; @@ -1740,19 +1787,21 @@ static void ftdi_read_bulk_callback (struct urb *urb) int status = urb->status; if (urb->number_of_packets > 0) { - err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__, - urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets ); - err("%s transfer_flags %x ", __func__,urb->transfer_flags ); + err("%s transfer_buffer_length %d actual_length %d number of packets %d", + __func__, + urb->transfer_buffer_length, + urb->actual_length, urb->number_of_packets); + err("%s transfer_flags %x ", __func__, urb->transfer_flags); } dbg("%s - port %d", __func__, port->number); - if (port->open_count <= 0) + if (port->port.count <= 0) return; - tty = port->tty; + tty = port->port.tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__func__); + dbg("%s - bad tty pointer - exiting", __func__); return; } @@ -1762,14 +1811,13 @@ static void ftdi_read_bulk_callback (struct urb *urb) return; } - if (urb != port->read_urb) { + if (urb != port->read_urb) err("%s - Not my urb!", __func__); - } if (status) { - /* This will happen at close every time so it is a dbg not an err */ - dbg("(this is ok on close) nonzero read bulk status received: " - "%d", status); + /* This will happen at close every time so it is a dbg not an + err */ + dbg("(this is ok on close) nonzero read bulk status received: %d", status); return; } @@ -1785,7 +1833,7 @@ static void ftdi_read_bulk_callback (struct urb *urb) } /* ftdi_read_bulk_callback */ -static void ftdi_process_read (struct work_struct *work) +static void ftdi_process_read(struct work_struct *work) { /* ftdi_process_read */ struct ftdi_private *priv = container_of(work, struct ftdi_private, rx_work.work); @@ -1803,12 +1851,12 @@ static void ftdi_process_read (struct work_struct *work) dbg("%s - port %d", __func__, port->number); - if (port->open_count <= 0) + if (port->port.count <= 0) return; - tty = port->tty; + tty = port->port.tty; if (!tty) { - dbg("%s - bad tty pointer - exiting",__func__); + dbg("%s - bad tty pointer - exiting", __func__); return; } @@ -1832,11 +1880,11 @@ static void ftdi_process_read (struct work_struct *work) urb->actual_length - priv->rx_processed); } else { /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - } else { - dbg("Status only: %03oo %03oo",data[0],data[1]); - } + if (urb->actual_length > 2) + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); + else + dbg("Status only: %03oo %03oo", data[0], data[1]); } @@ -1846,16 +1894,19 @@ static void ftdi_process_read (struct work_struct *work) /* if CD is dropped and the line is not CLOCAL then we should hangup */ need_flip = 0; - for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + for (packet_offset = priv->rx_processed; + packet_offset < urb->actual_length; packet_offset += PKTSZ) { int length; - /* Compare new line status to the old one, signal if different */ - /* N.B. packet may be processed more than once, but differences - * are only processed once. */ + /* Compare new line status to the old one, signal if different/ + N.B. packet may be processed more than once, but differences + are only processed once. */ if (priv != NULL) { - char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; + char new_status = data[packet_offset + 0] & + FTDI_STATUS_B0_MASK; if (new_status != priv->prev_status) { - priv->diff_status |= new_status ^ priv->prev_status; + priv->diff_status |= + new_status ^ priv->prev_status; wake_up_interruptible(&priv->delta_msr_wait); priv->prev_status = new_status; } @@ -1872,30 +1923,31 @@ static void ftdi_process_read (struct work_struct *work) break; } if (tty_buffer_request_room(tty, length) < length) { - /* break out & wait for throttling/unthrottling to happen */ + /* break out & wait for throttling/unthrottling to + happen */ dbg("%s - receive room low", __func__); break; } /* Handle errors and break */ error_flag = TTY_NORMAL; - /* Although the device uses a bitmask and hence can have multiple */ - /* errors on a packet - the order here sets the priority the */ - /* error is returned to the tty layer */ + /* Although the device uses a bitmask and hence can have + multiple errors on a packet - the order here sets the + priority the error is returned to the tty layer */ - if ( data[packet_offset+1] & FTDI_RS_OE ) { + if (data[packet_offset+1] & FTDI_RS_OE) { error_flag = TTY_OVERRUN; dbg("OVERRRUN error"); } - if ( data[packet_offset+1] & FTDI_RS_BI ) { + if (data[packet_offset+1] & FTDI_RS_BI) { error_flag = TTY_BREAK; dbg("BREAK received"); } - if ( data[packet_offset+1] & FTDI_RS_PE ) { + if (data[packet_offset+1] & FTDI_RS_PE) { error_flag = TTY_PARITY; dbg("PARITY error"); } - if ( data[packet_offset+1] & FTDI_RS_FE ) { + if (data[packet_offset+1] & FTDI_RS_FE) { error_flag = TTY_FRAME; dbg("FRAMING error"); } @@ -1904,7 +1956,8 @@ static void ftdi_process_read (struct work_struct *work) /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ - tty_insert_flip_char(tty, data[packet_offset+i], error_flag); + tty_insert_flip_char(tty, + data[packet_offset + i], error_flag); } need_flip = 1; } @@ -1912,19 +1965,19 @@ static void ftdi_process_read (struct work_struct *work) #ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW /* if a parity error is detected you get status packets forever until a character is sent without a parity error. - This doesn't work well since the application receives a never - ending stream of bad data - even though new data hasn't been sent. - Therefore I (bill) have taken this out. + This doesn't work well since the application receives a + never ending stream of bad data - even though new data + hasn't been sent. Therefore I (bill) have taken this out. However - this might make sense for framing errors and so on so I am leaving the code in for now. */ else { - if (error_flag != TTY_NORMAL){ + if (error_flag != TTY_NORMAL) { dbg("error_flag is not normal"); - /* In this case it is just status - if that is an error send a bad character */ - if(tty->flip.count >= TTY_FLIPBUF_SIZE) { + /* In this case it is just status - if that is + an error send a bad character */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) tty_flip_buffer_push(tty); - } tty_insert_flip_char(tty, 0xff, error_flag); need_flip = 1; } @@ -1933,9 +1986,8 @@ static void ftdi_process_read (struct work_struct *work) } /* "for(packet_offset=0..." */ /* Low latency */ - if (need_flip) { + if (need_flip) tty_flip_buffer_push(tty); - } if (packet_offset < urb->actual_length) { /* not completely processed - record progress */ @@ -1954,12 +2006,11 @@ static void ftdi_process_read (struct work_struct *work) } spin_unlock_irqrestore(&priv->rx_lock, flags); /* if the port is closed stop trying to read */ - if (port->open_count > 0){ + if (port->port.count > 0) /* delay processing of remainder */ schedule_delayed_work(&priv->rx_work, 1); - } else { + else dbg("%s - port is closed", __func__); - } return; } @@ -1967,24 +2018,26 @@ static void ftdi_process_read (struct work_struct *work) priv->rx_processed = 0; /* if the port is closed stop trying to read */ - if (port->open_count > 0){ + if (port->port.count > 0) { /* Continue trying to always read */ usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - ftdi_read_bulk_callback, port); + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ftdi_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); } - - return; } /* ftdi_process_read */ -static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) +static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); __u16 urb_value = 0; char buf[1]; @@ -1993,22 +2046,23 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) /* see drivers/char/tty_io.c to see it used */ /* last_set_data_urb_value NEVER has the break bit set in it */ - if (break_state) { + if (break_state) urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; - } else { + else urb_value = priv->last_set_data_urb_value; - } - - if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_DATA_REQUEST, - FTDI_SIO_SET_DATA_REQUEST_TYPE, - urb_value , priv->interface, - buf, 0, WDR_TIMEOUT) < 0) { - err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state); + if (usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST_TYPE, + urb_value , priv->interface, + buf, 0, WDR_TIMEOUT) < 0) { + err("%s FAILED to enable/disable break state (state was %d)", + __func__, break_state); } - dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value); + dbg("%s break state is %d - urb is %d", __func__, + break_state, urb_value); } @@ -2018,26 +2072,28 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) * WARNING: set_termios calls this with old_termios in kernel space */ -static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void ftdi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { /* ftdi_termios */ struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = port->tty->termios; + struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ - // Added for xon/xoff support + /* Added for xon/xoff support */ unsigned int iflag = termios->c_iflag; unsigned char vstop; unsigned char vstart; dbg("%s", __func__); - /* Force baud rate if this device requires it, unless it is set to B0. */ + /* Force baud rate if this device requires it, unless it is set to + B0. */ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { dbg("%s: forcing baud rate for this device", __func__); - tty_encode_baud_rate(port->tty, priv->force_baud, + tty_encode_baud_rate(tty, priv->force_baud, priv->force_baud); } @@ -2053,8 +2109,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old not - so just do the change regardless - should be able to compare old_termios and tty->termios */ /* NOTE These routines can get interrupted by - ftdi_sio_read_bulk_callback - need to examine what this - means - don't see any problems yet */ + ftdi_sio_read_bulk_callback - need to examine what this means - + don't see any problems yet */ /* Set number of data bits, parity, stop bits */ @@ -2078,8 +2134,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old } } - /* This is needed by the break command since it uses the same command - but is - * or'ed with this value */ + /* This is needed by the break command since it uses the same command + - but is or'ed with this value */ priv->last_set_data_urb_value = urb_value; if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2091,7 +2147,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old } /* Now do the baudrate */ - if ((cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) == B0) { /* Disable flow control */ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -2104,13 +2160,11 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } else { /* set the baudrate determined before */ - if (change_speed(port)) { + if (change_speed(tty, port)) err("%s urb failed to set baudrate", __func__); - } /* Ensure RTS and DTR are raised when baudrate changed from 0 */ - if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) { + if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } } /* Set flow control */ @@ -2130,18 +2184,22 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old /* * Xon/Xoff code * - * Check the IXOFF status in the iflag component of the termios structure - * if IXOFF is not set, the pre-xon/xoff code is executed. - */ + * Check the IXOFF status in the iflag component of the + * termios structure. If IXOFF is not set, the pre-xon/xoff + * code is executed. + */ if (iflag & IXOFF) { - dbg("%s request to enable xonxoff iflag=%04x",__func__,iflag); - // Try to enable the XON/XOFF on the ftdi_sio - // Set the vstart and vstop -- could have been done up above where - // a lot of other dereferencing is done but that would be very - // inefficient as vstart and vstop are not always needed + dbg("%s request to enable xonxoff iflag=%04x", + __func__, iflag); + /* Try to enable the XON/XOFF on the ftdi_sio + * Set the vstart and vstop -- could have been done up + * above where a lot of other dereferencing is done but + * that would be very inefficient as vstart and vstop + * are not always needed. + */ vstart = termios->c_cc[VSTART]; vstop = termios->c_cc[VSTOP]; - urb_value=(vstop << 8) | (vstart); + urb_value = (vstop << 8) | (vstart); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2153,8 +2211,9 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old err("urb failed to set to xon/xoff flow control"); } } else { - /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */ - /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */ + /* else clause to only run if cflag ! CRTSCTS and iflag + * ! XOFF. CHECKME Assuming XON/XOFF handled by tty + * stack - not by device */ dbg("%s Turning off hardware flow control", __func__); if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -2168,11 +2227,11 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old } return; -} /* ftdi_termios */ - +} -static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) +static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned char buf[2]; int ret; @@ -2181,32 +2240,35 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) switch (priv->chip_type) { case SIO: /* Request the status from the device */ - if ((ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, 0, - buf, 1, WDR_TIMEOUT)) < 0 ) { + ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, 0, + buf, 1, WDR_TIMEOUT); + if (ret < 0) { err("%s Could not get modem status of device - err: %d", __func__, ret); - return(ret); + return ret; } break; case FT8U232AM: case FT232BM: case FT2232C: case FT232RL: - /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same - format as the data returned from the in point */ - if ((ret = usb_control_msg(port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0), - FTDI_SIO_GET_MODEM_STATUS_REQUEST, - FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, - buf, 2, WDR_TIMEOUT)) < 0 ) { + /* the 8U232AM returns a two byte value (the sio is a 1 byte + value) - in the same format as the data returned from the in + point */ + ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, priv->interface, + buf, 2, WDR_TIMEOUT); + if (ret < 0) { err("%s Could not get modem status of device - err: %d", __func__, ret); - return(ret); + return ret; } break; default: @@ -2221,15 +2283,19 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file) priv->last_dtr_rts; } -static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear) +static int ftdi_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; dbg("%s TIOCMSET", __func__); return update_mctrl(port, set, clear); } -static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +static int ftdi_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); dbg("%s cmd 0x%04x", __func__, cmd); @@ -2238,10 +2304,12 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne switch (cmd) { case TIOCGSERIAL: /* gets serial port data */ - return get_serial_info(port, (struct serial_struct __user *) arg); + return get_serial_info(port, + (struct serial_struct __user *) arg); case TIOCSSERIAL: /* sets serial port data */ - return set_serial_info(port, (struct serial_struct __user *) arg); + return set_serial_info(tty, port, + (struct serial_struct __user *) arg); /* * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change @@ -2260,45 +2328,41 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne else { char diff = priv->diff_status; - if (diff == 0) { + if (diff == 0) return -EIO; /* no change => error */ - } /* Consume all events */ priv->diff_status = 0; - /* Return 0 if caller wanted to know about these bits */ - if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) || - ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) || - ((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) || - ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) { + /* Return 0 if caller wanted to know about + these bits */ + if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) || + ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) || + ((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) || + ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) { return 0; } /* - * Otherwise caller can't care less about what happened, - * and so we continue to wait for more events. + * Otherwise caller can't care less about what + * happened,and so we continue to wait for more + * events. */ } } - return(0); - break; + return 0; default: break; - } - - - /* This is not necessarily an error - turns out the higher layers will do - * some ioctls itself (see comment above) + /* This is not necessarily an error - turns out the higher layers + * will do some ioctls themselves (see comment above) */ dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd); + return -ENOIOCTLCMD; +} - return(-ENOIOCTLCMD); -} /* ftdi_ioctl */ - - -static void ftdi_throttle (struct usb_serial_port *port) +static void ftdi_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -2310,8 +2374,9 @@ static void ftdi_throttle (struct usb_serial_port *port) } -static void ftdi_unthrottle (struct usb_serial_port *port) +static void ftdi_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); int actually_throttled; unsigned long flags; @@ -2327,7 +2392,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) schedule_delayed_work(&priv->rx_work, 0); } -static int __init ftdi_init (void) +static int __init ftdi_init(void) { int retval; @@ -2357,13 +2422,13 @@ failed_sio_register: } -static void __exit ftdi_exit (void) +static void __exit ftdi_exit(void) { dbg("%s", __func__); - usb_deregister (&ftdi_driver); - usb_serial_deregister (&ftdi_sio_device); + usb_deregister(&ftdi_driver); + usb_serial_deregister(&ftdi_sio_device); } @@ -2371,8 +2436,8 @@ static void __exit ftdi_exit (void) module_init(ftdi_init); module_exit(ftdi_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 8302eca893e..a577ea44dcf 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,20 +1,20 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - - * known as FTDI_SIO (Serial Input/Output application of the chipset) + * Definitions for the FTDI USB Single Port Serial Converter - + * known as FTDI_SIO (Serial Input/Output application of the chipset) * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other * USC-1000s which don't look like my device though so beware! * - * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, + * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, * USB on the other. * * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details * of the protocol required to talk to the device and ongoing assistence * during development. * - * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the + * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais @@ -472,7 +472,7 @@ /* * DSS-20 Sync Station for Sony Ericsson P800 */ -#define FTDI_DSS20_PID 0xFC82 +#define FTDI_DSS20_PID 0xFC82 /* * Home Electronics (www.home-electro.com) USB gadgets @@ -884,7 +884,7 @@ /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_RESET - * wValue: Control Value + * wValue: Control Value * 0 = Reset SIO * 1 = Purge RX buffer * 2 = Purge TX buffer @@ -952,7 +952,7 @@ * 101 - add .625 to divisor * 110 - add .750 to divisor * 111 - add .875 to divisor - * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is + * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is * placed in bit 0 of the urb index. * * Note that there are a couple of special cases to support the highest baud @@ -971,8 +971,8 @@ typedef enum { } ftdi_chip_type_t; typedef enum { - ftdi_sio_b300 = 0, - ftdi_sio_b600 = 1, + ftdi_sio_b300 = 0, + ftdi_sio_b600 = 1, ftdi_sio_b1200 = 2, ftdi_sio_b2400 = 3, ftdi_sio_b4800 = 4, @@ -981,7 +981,7 @@ typedef enum { ftdi_sio_b38400 = 7, ftdi_sio_b57600 = 8, ftdi_sio_b115200 = 9 -} FTDI_SIO_baudrate_t ; +} FTDI_SIO_baudrate_t; /* * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values @@ -990,19 +990,19 @@ typedef enum { #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 -#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) +#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) +#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) +#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) +#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) +#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) +#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) #define FTDI_SIO_SET_BREAK (0x1 << 14) /* FTDI_SIO_SET_DATA */ /* - * BmRequestType: 0100 0000B + * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_SET_DATA * wValue: Data characteristics (see below) * wIndex: Port @@ -1035,7 +1035,7 @@ typedef enum { #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL -/* +/* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_MODEM_CTRL * wValue: ControlValue (see below) @@ -1049,11 +1049,11 @@ typedef enum { */ #define FTDI_SIO_SET_DTR_MASK 0x1 -#define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) -#define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) #define FTDI_SIO_SET_RTS_MASK 0x2 -#define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) -#define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) +#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) +#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) /* * ControlValue @@ -1076,7 +1076,7 @@ typedef enum { /* FTDI_SIO_SET_FLOW_CTRL */ #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL -#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 +#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) @@ -1085,7 +1085,7 @@ typedef enum { * bRequest: FTDI_SIO_SET_FLOW_CTRL * wValue: Xoff/Xon * wIndex: Protocol/Port - hIndex is protocl / lIndex is port - * wLength: 0 + * wLength: 0 * Data: None * * hIndex protocol is: @@ -1101,10 +1101,10 @@ typedef enum { * * A value of zero in the hIndex field disables handshaking * - * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character + * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character * and the lValue field contains the XON character. - */ - + */ + /* * FTDI_SIO_GET_LATENCY_TIMER * @@ -1118,7 +1118,7 @@ typedef enum { #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 -/* +/* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_LATENCY_TIMER * wValue: 0 @@ -1127,7 +1127,7 @@ typedef enum { * Data: latency (on return) */ -/* +/* * FTDI_SIO_SET_LATENCY_TIMER * * Set the timeout interval. The FTDI collects data from the slave @@ -1140,7 +1140,7 @@ typedef enum { #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_LATENCY_TIMER * wValue: Latency (milliseconds) @@ -1155,7 +1155,7 @@ typedef enum { */ /* - * FTDI_SIO_SET_EVENT_CHAR + * FTDI_SIO_SET_EVENT_CHAR * * Set the special event character for the specified communications port. * If the device sees this character it will immediately return the @@ -1168,7 +1168,7 @@ typedef enum { #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: EventChar @@ -1184,12 +1184,12 @@ typedef enum { * B9..15 Reserved * */ - + /* FTDI_SIO_SET_ERROR_CHAR */ /* Set the parity error replacement character for the specified communications port */ -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: Error Char @@ -1215,15 +1215,15 @@ typedef enum { #define FTDI_SIO_DSR_MASK 0x20 #define FTDI_SIO_RI_MASK 0x40 #define FTDI_SIO_RLSD_MASK 0x80 -/* +/* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_MODEM_STATUS * wValue: zero * wIndex: Port * wLength: 1 * Data: Status - * - * One byte of data is returned + * + * One byte of data is returned * B0..3 0 * B4 CTS * 0 = inactive @@ -1236,15 +1236,15 @@ typedef enum { * 1 = active * B7 Receive Line Signal Detect (RLSD) * 0 = inactive - * 1 = active + * 1 = active */ -/* Descriptors returned by the device - * +/* Descriptors returned by the device + * * Device Descriptor - * + * * Offset Field Size Value Description * 0 bLength 1 0x12 Size of descriptor in bytes * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type @@ -1260,9 +1260,9 @@ typedef enum { * 15 iProduct 1 0x02 Index of prod string desc * 16 iSerialNumber 1 0x02 Index of serial nmr string desc * 17 bNumConfigurations 1 0x01 Number of possible configurations - * + * * Configuration Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type @@ -1272,9 +1272,9 @@ typedef enum { * 6 iConfiguration 1 0x02 Index of config string descriptor * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup * 8 MaxPower 1 0x1E Max power consumption - * + * * Interface Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type @@ -1285,9 +1285,9 @@ typedef enum { * 6 bInterfaceSubClass 1 0xFF Subclass Code * 7 bInterfaceProtocol 1 0xFF Protocol Code * 8 iInterface 1 0x02 Index of interface string description - * + * * IN Endpoint Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type @@ -1295,9 +1295,9 @@ typedef enum { * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint - * + * * OUT Endpoint Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type @@ -1305,17 +1305,17 @@ typedef enum { * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint - * + * * DATA FORMAT - * + * * IN Endpoint - * + * * The device reserves the first two bytes of data on this endpoint to contain the current * values of the modem and line status registers. In the absence of data, the device * generates a message consisting of these two status bytes every 40 ms - * + * * Byte 0: Modem Status - * + * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 @@ -1325,9 +1325,9 @@ typedef enum { * B5 Data Set Ready (DSR) * B6 Ring Indicator (RI) * B7 Receive Line Signal Detect (RLSD) - * + * * Byte 1: Line Status - * + * * Offset Description * B0 Data Ready (DR) * B1 Overrun Error (OE) @@ -1337,7 +1337,7 @@ typedef enum { * B5 Transmitter Holding Register (THRE) * B6 Transmitter Empty (TEMT) * B7 Error in RCVR FIFO - * + * */ #define FTDI_RS0_CTS (1 << 4) #define FTDI_RS0_DSR (1 << 5) @@ -1355,17 +1355,17 @@ typedef enum { /* * OUT Endpoint - * + * * This device reserves the first bytes of data on this endpoint contain the length * and port identifier of the message. For the FTDI USB Serial converter the port * identifier is always 1. - * + * * Byte 0: Line Status - * + * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 * B2..7 Length of message - (not including Byte 0) - * + * */ diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index e8ba2cb5995..d30f736d2cc 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> static int debug; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 8ce5a56a48e..2e663f1afd5 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -33,7 +33,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/atomic.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -44,7 +44,7 @@ static int initial_mode = 1; /* debug flag */ -static int debug = 0; +static int debug; #define GARMIN_VENDOR_ID 0x091E @@ -56,7 +56,7 @@ static int debug = 0; #define VERSION_MINOR 31 #define _STR(s) #s -#define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b) +#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b) #define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR) #define DRIVER_AUTHOR "hermann kneissel" #define DRIVER_DESC "garmin gps driver" @@ -65,37 +65,37 @@ static int debug = 0; #define EINVPKT 1000 /* invalid packet structure */ -// size of the header of a packet using the usb protocol +/* size of the header of a packet using the usb protocol */ #define GARMIN_PKTHDR_LENGTH 12 -// max. possible size of a packet using the serial protocol -#define MAX_SERIAL_PKT_SIZ (3+255+3) +/* max. possible size of a packet using the serial protocol */ +#define MAX_SERIAL_PKT_SIZ (3 + 255 + 3) -// max. possible size of a packet with worst case stuffing -#define MAX_SERIAL_PKT_SIZ_STUFFED MAX_SERIAL_PKT_SIZ+256 +/* max. possible size of a packet with worst case stuffing */ +#define MAX_SERIAL_PKT_SIZ_STUFFED (MAX_SERIAL_PKT_SIZ + 256) -// size of a buffer able to hold a complete (no stuffing) packet -// (the document protocol does not contain packets with a larger -// size, but in theory a packet may be 64k+12 bytes - if in -// later protocol versions larger packet sizes occur, this value -// should be increased accordingly, so the input buffer is always -// large enough the store a complete packet inclusive header) -#define GPS_IN_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) +/* size of a buffer able to hold a complete (no stuffing) packet + * (the document protocol does not contain packets with a larger + * size, but in theory a packet may be 64k+12 bytes - if in + * later protocol versions larger packet sizes occur, this value + * should be increased accordingly, so the input buffer is always + * large enough the store a complete packet inclusive header) */ +#define GPS_IN_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) -// size of a buffer able to hold a complete (incl. stuffing) packet -#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) +/* size of a buffer able to hold a complete (incl. stuffing) packet */ +#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) -// where to place the packet id of a serial packet, so we can -// prepend the usb-packet header without the need to move the -// packets data +/* where to place the packet id of a serial packet, so we can + * prepend the usb-packet header without the need to move the + * packets data */ #define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2) -// max. size of incoming private packets (header+1 param) +/* max. size of incoming private packets (header+1 param) */ #define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4) #define GARMIN_LAYERID_TRANSPORT 0 #define GARMIN_LAYERID_APPL 20 -// our own layer-id to use for some control mechanisms +/* our own layer-id to use for some control mechanisms */ #define GARMIN_LAYERID_PRIVATE 0x01106E4B #define GARMIN_PKTID_PVT_DATA 51 @@ -103,7 +103,7 @@ static int debug = 0; #define CMND_ABORT_TRANSFER 0 -// packet ids used in private layer +/* packet ids used in private layer */ #define PRIV_PKTID_SET_DEBUG 1 #define PRIV_PKTID_SET_MODE 2 #define PRIV_PKTID_INFO_REQ 3 @@ -121,7 +121,8 @@ static int debug = 0; struct garmin_packet { struct list_head list; int seq; - int size; // the real size of the data array, always > 0 + /* the real size of the data array, always > 0 */ + int size; __u8 data[1]; }; @@ -164,7 +165,7 @@ struct garmin_data { #define MODE_NATIVE 0 #define MODE_GARMIN_SERIAL 1 -// Flags used in garmin_data.flags: +/* Flags used in garmin_data.flags: */ #define FLAGS_SESSION_REPLY_MASK 0x00C0 #define FLAGS_SESSION_REPLY1_SEEN 0x0080 #define FLAGS_SESSION_REPLY2_SEEN 0x0040 @@ -185,7 +186,7 @@ struct garmin_data { /* function prototypes */ -static void gsp_next_packet(struct garmin_data * garmin_data_p); +static void gsp_next_packet(struct garmin_data *garmin_data_p); static int garmin_write_bulk(struct usb_serial_port *port, const unsigned char *buf, int count, int dismiss_ack); @@ -217,12 +218,13 @@ static unsigned char const PRIVATE_REQ[] static struct usb_device_id id_table [] = { - /* the same device id seems to be used by all usb enabled gps devices */ - { USB_DEVICE(GARMIN_VENDOR_ID, 3 ) }, + /* the same device id seems to be used by all + usb enabled GPS devices */ + { USB_DEVICE(GARMIN_VENDOR_ID, 3) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver garmin_driver = { .name = "garmin_gps", @@ -233,9 +235,10 @@ static struct usb_driver garmin_driver = { }; -static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p) +static inline int noResponseFromAppLayer(struct garmin_data *garmin_data_p) { - return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count); + return atomic_read(&garmin_data_p->req_count) == + atomic_read(&garmin_data_p->resp_count); } @@ -261,10 +264,10 @@ static inline int getDataLength(const __u8 *usbPacket) */ static inline int isAbortTrfCmnd(const unsigned char *buf) { - if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, - sizeof(GARMIN_STOP_TRANSFER_REQ)) || - 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, - sizeof(GARMIN_STOP_TRANSFER_REQ_V2))) + if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, + sizeof(GARMIN_STOP_TRANSFER_REQ)) || + 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, + sizeof(GARMIN_STOP_TRANSFER_REQ_V2))) return 1; else return 0; @@ -275,11 +278,11 @@ static inline int isAbortTrfCmnd(const unsigned char *buf) static void send_to_tty(struct usb_serial_port *port, char *data, unsigned int actual_length) { - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; if (tty && actual_length) { - usb_serial_debug_data(debug, &port->dev, + usb_serial_debug_data(debug, &port->dev, __func__, actual_length, data); tty_buffer_request_room(tty, actual_length); @@ -296,7 +299,7 @@ static void send_to_tty(struct usb_serial_port *port, /* * queue a received (usb-)packet for later processing */ -static int pkt_add(struct garmin_data * garmin_data_p, +static int pkt_add(struct garmin_data *garmin_data_p, unsigned char *data, unsigned int data_length) { int state = 0; @@ -307,7 +310,7 @@ static int pkt_add(struct garmin_data * garmin_data_p, /* process only packets containg data ... */ if (data_length) { pkt = kmalloc(sizeof(struct garmin_packet)+data_length, - GFP_ATOMIC); + GFP_ATOMIC); if (pkt == NULL) { dev_err(&garmin_data_p->port->dev, "out of memory\n"); return 0; @@ -325,16 +328,15 @@ static int pkt_add(struct garmin_data * garmin_data_p, /* in serial mode, if someone is waiting for data from the device, iconvert and send the next packet to tty. */ - if (result && (state == STATE_GSP_WAIT_DATA)) { + if (result && (state == STATE_GSP_WAIT_DATA)) gsp_next_packet(garmin_data_p); - } } return result; } /* get the next pending packet */ -static struct garmin_packet *pkt_pop(struct garmin_data * garmin_data_p) +static struct garmin_packet *pkt_pop(struct garmin_data *garmin_data_p) { unsigned long flags; struct garmin_packet *result = NULL; @@ -350,7 +352,7 @@ static struct garmin_packet *pkt_pop(struct garmin_data * garmin_data_p) /* free up all queued data */ -static void pkt_clear(struct garmin_data * garmin_data_p) +static void pkt_clear(struct garmin_data *garmin_data_p) { unsigned long flags; struct garmin_packet *result = NULL; @@ -372,7 +374,7 @@ static void pkt_clear(struct garmin_data * garmin_data_p) ******************************************************************************/ /* send an ack packet back to the tty */ -static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) +static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) { __u8 pkt[10]; __u8 cksum = 0; @@ -391,9 +393,8 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) *ptr++ = pkt_id; cksum += pkt_id; - if (pkt_id == DLE) { + if (pkt_id == DLE) *ptr++ = DLE; - } *ptr++ = 0; *ptr++ = 0xFF & (-cksum); @@ -415,12 +416,12 @@ static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id) * at GSP_INITIAL_OFFSET. * * count - number of bytes in the input buffer including space reserved for - * the usb header: GSP_INITIAL_OFFSET + number of bytes in packet + * the usb header: GSP_INITIAL_OFFSET + number of bytes in packet * (including pkt-id, data-length a. cksum) */ -static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) +static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) { - const __u8* recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; + const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; int cksum = 0; @@ -440,8 +441,8 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) cksum += *recpkt++; cksum += *recpkt++; - // sanity check, remove after test ... - if ((__u8*)&(usbdata[3]) != recpkt) { + /* sanity check, remove after test ... */ + if ((__u8 *)&(usbdata[3]) != recpkt) { dbg("%s - ptr mismatch %p - %p", __func__, &(usbdata[4]), recpkt); return -EINVPKT; @@ -462,7 +463,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) usbdata[1] = __cpu_to_le32(pktid); usbdata[2] = __cpu_to_le32(size); - garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, + garmin_write_bulk(garmin_data_p->port, garmin_data_p->inbuffer, GARMIN_PKTHDR_LENGTH+size, 0); /* if this was an abort-transfer command, flush all @@ -495,7 +496,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) * if the input is an abort command, drop all queued data. */ -static int gsp_receive(struct garmin_data * garmin_data_p, +static int gsp_receive(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { unsigned long flags; @@ -504,10 +505,11 @@ static int gsp_receive(struct garmin_data * garmin_data_p, int i = 0; __u8 *dest; int size; - // dleSeen: set if last byte read was a DLE + /* dleSeen: set if last byte read was a DLE */ int dleSeen; - // skip: if set, skip incoming data until possible start of - // new packet + /* skip: if set, skip incoming data until possible start of + * new packet + */ int skip; __u8 data; @@ -521,14 +523,13 @@ static int gsp_receive(struct garmin_data * garmin_data_p, dbg("%s - dle=%d skip=%d size=%d count=%d", __func__, dleSeen, skip, size, count); - if (size == 0) { + if (size == 0) size = GSP_INITIAL_OFFSET; - } while (offs < count) { data = *(buf+offs); - offs ++; + offs++; if (data == DLE) { if (skip) { /* start of a new pkt */ @@ -554,9 +555,8 @@ static int gsp_receive(struct garmin_data * garmin_data_p, ack_or_nak_seen = NAK; dbg("NAK packet complete."); } else { - dbg("packet complete " - "- id=0x%X.", - 0xFF & data); + dbg("packet complete - id=0x%X.", + 0xFF & data); gsp_rec_packet(garmin_data_p, size); } @@ -589,7 +589,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p, garmin_data_p->insize = size; - // copy flags back to structure + /* copy flags back to structure */ if (skip) garmin_data_p->flags |= FLAGS_GSP_SKIP; else @@ -600,16 +600,13 @@ static int gsp_receive(struct garmin_data * garmin_data_p, else garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN; - if (ack_or_nak_seen) { + if (ack_or_nak_seen) garmin_data_p->state = STATE_GSP_WAIT_DATA; - } spin_unlock_irqrestore(&garmin_data_p->lock, flags); - if (ack_or_nak_seen) { + if (ack_or_nak_seen) gsp_next_packet(garmin_data_p); - } - return count; } @@ -623,7 +620,7 @@ static int gsp_receive(struct garmin_data * garmin_data_p, * * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent */ -static int gsp_send(struct garmin_data * garmin_data_p, +static int gsp_send(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { const unsigned char *src; @@ -631,11 +628,11 @@ static int gsp_send(struct garmin_data * garmin_data_p, int pktid = 0; int datalen = 0; int cksum = 0; - int i=0; + int i = 0; int k; dbg("%s - state %d - %d bytes.", __func__, - garmin_data_p->state, count); + garmin_data_p->state, count); k = garmin_data_p->outsize; if ((k+count) > GPS_OUT_BUFSIZ) { @@ -650,7 +647,7 @@ static int gsp_send(struct garmin_data * garmin_data_p, if (k >= GARMIN_PKTHDR_LENGTH) { pktid = getPacketId(garmin_data_p->outbuffer); - datalen= getDataLength(garmin_data_p->outbuffer); + datalen = getDataLength(garmin_data_p->outbuffer); i = GARMIN_PKTHDR_LENGTH + datalen; if (k < i) return 0; @@ -658,19 +655,18 @@ static int gsp_send(struct garmin_data * garmin_data_p, return 0; } - dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, - k, i); + dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i); /* garmin_data_p->outbuffer now contains a complete packet */ usb_serial_debug_data(debug, &garmin_data_p->port->dev, - __func__, k, garmin_data_p->outbuffer); + __func__, k, garmin_data_p->outbuffer); garmin_data_p->outsize = 0; if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { - dbg("not an application packet (%d)", - getLayerId(garmin_data_p->outbuffer)); + dbg("not an application packet (%d)", + getLayerId(garmin_data_p->outbuffer)); return -1; } @@ -688,14 +684,14 @@ static int gsp_send(struct garmin_data * garmin_data_p, k = 0; src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; - for (i=0; i<datalen; i++) { + for (i = 0; i < datalen; i++) { if (*src++ == DLE) k++; } src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; if (k > (GARMIN_PKTHDR_LENGTH-2)) { - /* can't add stuffing DLEs in place, move data to end + /* can't add stuffing DLEs in place, move data to end of buffer ... */ dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen; memcpy(dst, src, datalen); @@ -712,14 +708,14 @@ static int gsp_send(struct garmin_data * garmin_data_p, if (datalen == DLE) *dst++ = DLE; - for (i=0; i<datalen; i++) { + for (i = 0; i < datalen; i++) { __u8 c = *src++; *dst++ = c; cksum += c; if (c == DLE) *dst++ = DLE; } - + cksum = 0xFF & -cksum; *dst++ = cksum; if (cksum == DLE) @@ -744,7 +740,7 @@ static int gsp_send(struct garmin_data * garmin_data_p, /* * Process the next pending data packet - if there is one */ -static void gsp_next_packet(struct garmin_data * garmin_data_p) +static void gsp_next_packet(struct garmin_data *garmin_data_p) { struct garmin_packet *pkt = NULL; @@ -774,17 +770,17 @@ static void gsp_next_packet(struct garmin_data * garmin_data_p) * buf contains the data read, it may span more than one packet * or even incomplete packets */ -static int nat_receive(struct garmin_data * garmin_data_p, +static int nat_receive(struct garmin_data *garmin_data_p, const unsigned char *buf, int count) { unsigned long flags; - __u8 * dest; + __u8 *dest; int offs = 0; int result = count; int len; while (offs < count) { - // if buffer contains header, copy rest of data + /* if buffer contains header, copy rest of data */ if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) len = GARMIN_PKTHDR_LENGTH +getDataLength(garmin_data_p->inbuffer); @@ -792,9 +788,9 @@ static int nat_receive(struct garmin_data * garmin_data_p, len = GARMIN_PKTHDR_LENGTH; if (len >= GPS_IN_BUFSIZ) { - /* seem to be an invalid packet, ignore rest of input */ - dbg("%s - packet size too large: %d", - __func__, len); + /* seems to be an invalid packet, ignore rest + of input */ + dbg("%s - packet size too large: %d", __func__, len); garmin_data_p->insize = 0; count = 0; result = -EINVPKT; @@ -804,7 +800,7 @@ static int nat_receive(struct garmin_data * garmin_data_p, len = (count-offs); if (len > 0) { dest = garmin_data_p->inbuffer - +garmin_data_p->insize; + + garmin_data_p->insize; memcpy(dest, buf+offs, len); garmin_data_p->insize += len; offs += len; @@ -816,17 +812,19 @@ static int nat_receive(struct garmin_data * garmin_data_p, len = GARMIN_PKTHDR_LENGTH+ getDataLength(garmin_data_p->inbuffer); if (garmin_data_p->insize >= len) { - garmin_write_bulk (garmin_data_p->port, - garmin_data_p->inbuffer, - len, 0); + garmin_write_bulk(garmin_data_p->port, + garmin_data_p->inbuffer, + len, 0); garmin_data_p->insize = 0; /* if this was an abort-transfer command, flush all queued data. */ if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { - spin_lock_irqsave(&garmin_data_p->lock, flags); + spin_lock_irqsave(&garmin_data_p->lock, + flags); garmin_data_p->flags |= FLAGS_DROP_DATA; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + spin_unlock_irqrestore( + &garmin_data_p->lock, flags); pkt_clear(garmin_data_p); } } @@ -842,7 +840,7 @@ static int nat_receive(struct garmin_data * garmin_data_p, static void priv_status_resp(struct usb_serial_port *port) { - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); __le32 *pkt = (__le32 *)garmin_data_p->privpkt; pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE); @@ -852,7 +850,7 @@ static void priv_status_resp(struct usb_serial_port *port) pkt[4] = __cpu_to_le32(garmin_data_p->mode); pkt[5] = __cpu_to_le32(garmin_data_p->serial_num); - send_to_tty(port, (__u8*)pkt, 6*4); + send_to_tty(port, (__u8 *)pkt, 6 * 4); } @@ -864,7 +862,7 @@ static int process_resetdev_request(struct usb_serial_port *port) { unsigned long flags; int status; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED); @@ -872,8 +870,8 @@ static int process_resetdev_request(struct usb_serial_port *port) garmin_data_p->serial_num = 0; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - usb_kill_urb (port->interrupt_in_urb); - dbg("%s - usb_reset_device", __func__ ); + usb_kill_urb(port->interrupt_in_urb); + dbg("%s - usb_reset_device", __func__); status = usb_reset_device(port->serial->dev); if (status) dbg("%s - usb_reset_device failed: %d", @@ -886,7 +884,7 @@ static int process_resetdev_request(struct usb_serial_port *port) /* * clear all cached data */ -static int garmin_clear(struct garmin_data * garmin_data_p) +static int garmin_clear(struct garmin_data *garmin_data_p) { unsigned long flags; int status = 0; @@ -896,8 +894,7 @@ static int garmin_clear(struct garmin_data * garmin_data_p) if (port != NULL && atomic_read(&garmin_data_p->resp_count)) { /* send a terminate command */ status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ, - sizeof(GARMIN_STOP_TRANSFER_REQ), - 1); + sizeof(GARMIN_STOP_TRANSFER_REQ), 1); } /* flush all queued data */ @@ -920,28 +917,26 @@ static int garmin_init_session(struct usb_serial_port *port) { unsigned long flags; struct usb_serial *serial = port->serial; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); int status = 0; if (status == 0) { - usb_kill_urb (port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); dbg("%s - adding interrupt input", __func__); port->interrupt_in_urb->dev = serial->dev; status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (status) dev_err(&serial->dev->dev, - "%s - failed submitting interrupt urb," - " error %d\n", - __func__, status); + "%s - failed submitting interrupt urb, error %d\n", + __func__, status); } if (status == 0) { dbg("%s - starting session ...", __func__); garmin_data_p->state = STATE_ACTIVE; status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, - sizeof(GARMIN_START_SESSION_REQ), - 0); + sizeof(GARMIN_START_SESSION_REQ), 0); if (status >= 0) { @@ -951,14 +946,14 @@ static int garmin_init_session(struct usb_serial_port *port) /* not needed, but the win32 driver does it too ... */ status = garmin_write_bulk(port, - GARMIN_START_SESSION_REQ2, - sizeof(GARMIN_START_SESSION_REQ2), - 0); + GARMIN_START_SESSION_REQ2, + sizeof(GARMIN_START_SESSION_REQ2), 0); if (status >= 0) { status = 0; spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->ignorePkts++; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + spin_unlock_irqrestore(&garmin_data_p->lock, + flags); } } } @@ -970,11 +965,12 @@ static int garmin_init_session(struct usb_serial_port *port) -static int garmin_open (struct usb_serial_port *port, struct file *filp) +static int garmin_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { unsigned long flags; int status = 0; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); @@ -983,8 +979,8 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) * through, otherwise it is scheduled, and with high data rates (like * with OHCI) data can get lost. */ - if (port->tty) - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; @@ -995,23 +991,22 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* shutdown any bulk reads that might be going on */ - usb_kill_urb (port->write_urb); - usb_kill_urb (port->read_urb); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); - if (garmin_data_p->state == STATE_RESET) { + if (garmin_data_p->state == STATE_RESET) status = garmin_init_session(port); - } garmin_data_p->state = STATE_ACTIVE; - return status; } -static void garmin_close (struct usb_serial_port *port, struct file * filp) +static void garmin_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__, port->number, garmin_data_p->mode, @@ -1025,8 +1020,8 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp) garmin_clear(garmin_data_p); /* shutdown our urbs */ - usb_kill_urb (port->read_urb); - usb_kill_urb (port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->write_urb); if (!port->serial->disconnected) { if (noResponseFromAppLayer(garmin_data_p) || @@ -1042,21 +1037,22 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp) mutex_unlock(&port->serial->disc_mutex); } - -static void garmin_write_bulk_callback (struct urb *urb) +static void garmin_write_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; int status = urb->status; if (port) { - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = + usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer) && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { - gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]); + gsp_send_ack(garmin_data_p, + ((__u8 *)urb->transfer_buffer)[4]); } if (status) { @@ -1070,20 +1066,21 @@ static void garmin_write_bulk_callback (struct urb *urb) usb_serial_port_softint(port); } - /* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */ + /* Ignore errors that resulted from garmin_write_bulk with + dismiss_ack = 1 */ /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree (urb->transfer_buffer); + kfree(urb->transfer_buffer); } -static int garmin_write_bulk (struct usb_serial_port *port, +static int garmin_write_bulk(struct usb_serial_port *port, const unsigned char *buf, int count, int dismiss_ack) { unsigned long flags; struct usb_serial *serial = port->serial; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); struct urb *urb; unsigned char *buffer; int status; @@ -1095,7 +1092,7 @@ static int garmin_write_bulk (struct usb_serial_port *port, garmin_data_p->flags &= ~FLAGS_DROP_DATA; spin_unlock_irqrestore(&garmin_data_p->lock, flags); - buffer = kmalloc (count, GFP_ATOMIC); + buffer = kmalloc(count, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); return -ENOMEM; @@ -1104,17 +1101,17 @@ static int garmin_write_bulk (struct usb_serial_port *port, urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { dev_err(&port->dev, "no more free urbs\n"); - kfree (buffer); + kfree(buffer); return -ENOMEM; } - memcpy (buffer, buf, count); + memcpy(buffer, buf, count); usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); - usb_fill_bulk_urb (urb, serial->dev, - usb_sndbulkpipe (serial->dev, - port->bulk_out_endpointAddress), + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), buffer, count, garmin_write_bulk_callback, dismiss_ack ? NULL : port); @@ -1132,33 +1129,29 @@ static int garmin_write_bulk (struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, - "%s - usb_submit_urb(write bulk) " - "failed with status = %d\n", + "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); count = status; } /* we are done with this urb, so let the host driver * really free it when it is finished with it */ - usb_free_urb (urb); + usb_free_urb(urb); return count; } - - -static int garmin_write (struct usb_serial_port *port, - const unsigned char *buf, int count) +static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { int pktid, pktsiz, len; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; usb_serial_debug_data(debug, &port->dev, __func__, count, buf); /* check for our private packets */ if (count >= GARMIN_PKTHDR_LENGTH) { - len = PRIVPKTSIZ; if (count < len) len = count; @@ -1169,15 +1162,16 @@ static int garmin_write (struct usb_serial_port *port, pktid = getPacketId(garmin_data_p->privpkt); if (count == (GARMIN_PKTHDR_LENGTH+pktsiz) - && GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) { + && GARMIN_LAYERID_PRIVATE == + getLayerId(garmin_data_p->privpkt)) { dbg("%s - processing private request %d", __func__, pktid); - // drop all unfinished transfers + /* drop all unfinished transfers */ garmin_clear(garmin_data_p); - switch(pktid) { + switch (pktid) { case PRIV_PKTID_SET_DEBUG: if (pktsiz != 4) @@ -1226,44 +1220,31 @@ static int garmin_write (struct usb_serial_port *port, } -static int garmin_write_room (struct usb_serial_port *port) +static int garmin_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; /* * Report back the bytes currently available in the output buffer. */ - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); return GPS_OUT_BUFSIZ-garmin_data_p->outsize; } -static int garmin_chars_in_buffer (struct usb_serial_port *port) -{ - /* - * Report back the number of bytes currently in our input buffer. - * Will this lock up the driver - the buffer contains an incomplete - * package which will not be written to the device until it - * has been completed ? - */ - //struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - //return garmin_data_p->insize; - return 0; -} - - -static void garmin_read_process(struct garmin_data * garmin_data_p, +static void garmin_read_process(struct garmin_data *garmin_data_p, unsigned char *data, unsigned data_length) { if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ dbg("%s - pkt dropped", __func__); } else if (garmin_data_p->state != STATE_DISCONNECTED && - garmin_data_p->state != STATE_RESET ) { + garmin_data_p->state != STATE_RESET) { /* remember any appl.layer packets, so we know if a reset is required or not when closing the device */ if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY, - sizeof(GARMIN_APP_LAYER_REPLY))) { + sizeof(GARMIN_APP_LAYER_REPLY))) { atomic_inc(&garmin_data_p->resp_count); } @@ -1273,9 +1254,8 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); } else if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { - if (getLayerId(data) == GARMIN_LAYERID_APPL) { + if (getLayerId(data) == GARMIN_LAYERID_APPL) pkt_add(garmin_data_p, data, data_length); - } } else { send_to_tty(garmin_data_p->port, data, data_length); } @@ -1283,12 +1263,12 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, } -static void garmin_read_bulk_callback (struct urb *urb) +static void garmin_read_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; struct usb_serial *serial = port->serial; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; int status = urb->status; int retval; @@ -1306,7 +1286,7 @@ static void garmin_read_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); garmin_read_process(garmin_data_p, data, urb->actual_length); @@ -1340,13 +1320,13 @@ static void garmin_read_bulk_callback (struct urb *urb) } -static void garmin_read_int_callback (struct urb *urb) +static void garmin_read_int_callback(struct urb *urb) { unsigned long flags; int retval; struct usb_serial_port *port = urb->context; struct usb_serial *serial = port->serial; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; int status = urb->status; @@ -1372,30 +1352,31 @@ static void garmin_read_int_callback (struct urb *urb) if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, - sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { + sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { dbg("%s - bulk data available.", __func__); if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { /* bulk data available */ - usb_fill_bulk_urb (port->read_urb, serial->dev, - usb_rcvbulkpipe (serial->dev, - port->bulk_in_endpointAddress), + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, garmin_read_bulk_callback, port); retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) { dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, retval); + "%s - failed submitting read urb, error %d\n", + __func__, retval); } else { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE; /* do not send this packet to the user */ garmin_data_p->ignorePkts = 1; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + spin_unlock_irqrestore(&garmin_data_p->lock, + flags); } } else { /* bulk-in transfer still active */ @@ -1406,15 +1387,15 @@ static void garmin_read_int_callback (struct urb *urb) } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) && 0 == memcmp(data, GARMIN_START_SESSION_REPLY, - sizeof(GARMIN_START_SESSION_REPLY))) { + sizeof(GARMIN_START_SESSION_REPLY))) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* save the serial number */ - garmin_data_p->serial_num - = __le32_to_cpup((__le32*)(data+GARMIN_PKTHDR_LENGTH)); + garmin_data_p->serial_num = __le32_to_cpup( + (__le32 *)(data+GARMIN_PKTHDR_LENGTH)); dbg("%s - start-of-session reply seen - serial %u.", __func__, garmin_data_p->serial_num); @@ -1433,7 +1414,7 @@ static void garmin_read_int_callback (struct urb *urb) } port->interrupt_in_urb->dev = port->serial->dev; - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", @@ -1446,7 +1427,7 @@ static void garmin_read_int_callback (struct urb *urb) * and then sets a timer to call itself again until all queued data * is sent. */ -static int garmin_flush_queue(struct garmin_data * garmin_data_p) +static int garmin_flush_queue(struct garmin_data *garmin_data_p) { unsigned long flags; struct garmin_packet *pkt; @@ -1468,10 +1449,11 @@ static int garmin_flush_queue(struct garmin_data * garmin_data_p) } -static void garmin_throttle (struct usb_serial_port *port) +static void garmin_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned long flags; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); /* set flag, data received will be put into a queue @@ -1482,10 +1464,11 @@ static void garmin_throttle (struct usb_serial_port *port) } -static void garmin_unthrottle (struct usb_serial_port *port) +static void garmin_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned long flags; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); int status; dbg("%s - port %d", __func__, port->number); @@ -1507,8 +1490,6 @@ static void garmin_unthrottle (struct usb_serial_port *port) } } - - /* * The timer is currently only used to send queued packets to * the tty in cases where the protocol provides no own handshaking @@ -1526,11 +1507,11 @@ static void timeout_handler(unsigned long data) -static int garmin_attach (struct usb_serial *serial) +static int garmin_attach(struct usb_serial *serial) { int status = 0; struct usb_serial_port *port = serial->port[0]; - struct garmin_data * garmin_data_p = NULL; + struct garmin_data *garmin_data_p = NULL; dbg("%s", __func__); @@ -1542,7 +1523,7 @@ static int garmin_attach (struct usb_serial *serial) init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); - //garmin_data_p->timer.expires = jiffies + session_timeout; + /* garmin_data_p->timer.expires = jiffies + session_timeout; */ garmin_data_p->timer.data = (unsigned long)garmin_data_p; garmin_data_p->timer.function = timeout_handler; garmin_data_p->port = port; @@ -1556,16 +1537,16 @@ static int garmin_attach (struct usb_serial *serial) } -static void garmin_shutdown (struct usb_serial *serial) +static void garmin_shutdown(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); dbg("%s", __func__); - usb_kill_urb (port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); - kfree (garmin_data_p); + kfree(garmin_data_p); usb_set_serial_port_data(port, NULL); } @@ -1588,7 +1569,6 @@ static struct usb_serial_driver garmin_device = { .shutdown = garmin_shutdown, .write = garmin_write, .write_room = garmin_write_room, - .chars_in_buffer = garmin_chars_in_buffer, .write_bulk_callback = garmin_write_bulk_callback, .read_bulk_callback = garmin_read_bulk_callback, .read_int_callback = garmin_read_int_callback, @@ -1596,7 +1576,7 @@ static struct usb_serial_driver garmin_device = { -static int __init garmin_init (void) +static int __init garmin_init(void) { int retval; @@ -1616,10 +1596,10 @@ failed_garmin_register: } -static void __exit garmin_exit (void) +static void __exit garmin_exit(void) { - usb_deregister (&garmin_driver); - usb_serial_deregister (&garmin_device); + usb_deregister(&garmin_driver); + usb_serial_deregister(&garmin_device); } @@ -1628,8 +1608,8 @@ static void __exit garmin_exit (void) module_init(garmin_init); module_exit(garmin_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IWUSR | S_IRUGO); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 537f12a027c..fe84c88ec20 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -18,7 +18,7 @@ #include <linux/moduleparam.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> static int debug; @@ -81,7 +81,7 @@ static int generic_probe(struct usb_interface *interface, } #endif -int usb_serial_generic_register (int _debug) +int usb_serial_generic_register(int _debug) { int retval = 0; @@ -89,10 +89,11 @@ int usb_serial_generic_register (int _debug) #ifdef CONFIG_USB_SERIAL_GENERIC generic_device_ids[0].idVendor = vendor; generic_device_ids[0].idProduct = product; - generic_device_ids[0].match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; + generic_device_ids[0].match_flags = + USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; /* register our generic driver with ourselves */ - retval = usb_serial_register (&usb_serial_generic_device); + retval = usb_serial_register(&usb_serial_generic_device); if (retval) goto exit; retval = usb_register(&generic_driver); @@ -103,16 +104,17 @@ exit: return retval; } -void usb_serial_generic_deregister (void) +void usb_serial_generic_deregister(void) { #ifdef CONFIG_USB_SERIAL_GENERIC /* remove our generic driver */ usb_deregister(&generic_driver); - usb_serial_deregister (&usb_serial_generic_device); + usb_serial_deregister(&usb_serial_generic_device); #endif } -int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) +int usb_serial_generic_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; int result = 0; @@ -120,11 +122,11 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); - /* force low_latency on so that our tty_push actually forces the data through, - otherwise it is scheduled, and with high data rates (like with OHCI) data - can get lost. */ - if (port->tty) - port->tty->low_latency = 1; + /* force low_latency on so that our tty_push actually forces the data + through, otherwise it is scheduled, and with high data rates (like + with OHCI) data can get lost. */ + if (tty) + tty->low_latency = 1; /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); @@ -135,8 +137,9 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) /* if we have a bulk endpoint, start reading from it */ if (serial->num_bulk_in) { /* Start reading from the device */ - usb_fill_bulk_urb (port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ((serial->type->read_bulk_callback) ? @@ -145,14 +148,16 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp) port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } return result; } EXPORT_SYMBOL_GPL(usb_serial_generic_open); -static void generic_cleanup (struct usb_serial_port *port) +static void generic_cleanup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -182,7 +187,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) #endif for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - if (port->open_count && port->read_urb) { + if (port->port.count && port->read_urb) { r = usb_submit_urb(port->read_urb, GFP_NOIO); if (r < 0) c++; @@ -192,13 +197,15 @@ int usb_serial_generic_resume(struct usb_serial *serial) return c ? -EIO : 0; } -void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp) +void usb_serial_generic_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __func__, port->number); - generic_cleanup (port); + generic_cleanup(port); } -int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *buf, int count) +int usb_serial_generic_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; int result; @@ -208,7 +215,7 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * if (count == 0) { dbg("%s - write request of 0 bytes", __func__); - return (0); + return 0; } /* only do something if we have a bulk out endpoint */ @@ -223,27 +230,32 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * port->write_urb_busy = 1; spin_unlock_irqrestore(&port->lock, flags); - count = (count > port->bulk_out_size) ? port->bulk_out_size : count; + count = (count > port->bulk_out_size) ? + port->bulk_out_size : count; - memcpy (port->write_urb->transfer_buffer, buf, count); + memcpy(port->write_urb->transfer_buffer, buf, count); data = port->write_urb->transfer_buffer; usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ - usb_fill_bulk_urb (port->write_urb, serial->dev, - usb_sndbulkpipe (serial->dev, - port->bulk_out_endpointAddress), + usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, count, - ((serial->type->write_bulk_callback) ? + ((serial->type->write_bulk_callback) ? serial->type->write_bulk_callback : - usb_serial_generic_write_bulk_callback), port); + usb_serial_generic_write_bulk_callback), + port); /* send the data out the bulk port */ port->write_urb_busy = 1; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); - /* don't have to grab the lock here, as we will retry if != 0 */ + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); + /* don't have to grab the lock here, as we will + retry if != 0 */ port->write_urb_busy = 0; } else result = count; @@ -255,8 +267,9 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * return 0; } -int usb_serial_generic_write_room (struct usb_serial_port *port) +int usb_serial_generic_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int room = 0; @@ -272,8 +285,9 @@ int usb_serial_generic_write_room (struct usb_serial_port *port) return room; } -int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port) +int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int chars = 0; @@ -286,7 +300,7 @@ int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port) } dbg("%s - returns %d", __func__, chars); - return (chars); + return chars; } @@ -297,24 +311,26 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags) int result; /* Continue reading from device */ - usb_fill_bulk_urb (urb, serial->dev, - usb_rcvbulkpipe (serial->dev, - port->bulk_in_endpointAddress), + usb_fill_bulk_urb(urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), urb->transfer_buffer, urb->transfer_buffer_length, - ((serial->type->read_bulk_callback) ? - serial->type->read_bulk_callback : + ((serial->type->read_bulk_callback) ? + serial->type->read_bulk_callback : usb_serial_generic_read_bulk_callback), port); result = usb_submit_urb(urb, mem_flags); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); } /* Push data to tty layer and resubmit the bulk read URB */ -static void flush_and_resubmit_read_urb (struct usb_serial_port *port) +static void flush_and_resubmit_read_urb(struct usb_serial_port *port) { struct urb *urb = port->read_urb; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; int room; /* Push data to tty */ @@ -329,7 +345,7 @@ static void flush_and_resubmit_read_urb (struct usb_serial_port *port) resubmit_read_urb(port, GFP_ATOMIC); } -void usb_serial_generic_read_bulk_callback (struct urb *urb) +void usb_serial_generic_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; @@ -344,20 +360,21 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); /* Throttle the device if requested by tty */ spin_lock_irqsave(&port->lock, flags); - if (!(port->throttled = port->throttle_req)) { + port->throttled = port->throttle_req; + if (!port->throttled) { spin_unlock_irqrestore(&port->lock, flags); flush_and_resubmit_read_urb(port); - } else { + } else spin_unlock_irqrestore(&port->lock, flags); - } } EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); -void usb_serial_generic_write_bulk_callback (struct urb *urb) +void usb_serial_generic_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -374,8 +391,9 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb) } EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); -void usb_serial_generic_throttle (struct usb_serial_port *port) +void usb_serial_generic_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; dbg("%s - port %d", __func__, port->number); @@ -387,8 +405,9 @@ void usb_serial_generic_throttle (struct usb_serial_port *port) spin_unlock_irqrestore(&port->lock, flags); } -void usb_serial_generic_unthrottle (struct usb_serial_port *port) +void usb_serial_generic_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int was_throttled; unsigned long flags; @@ -406,15 +425,14 @@ void usb_serial_generic_unthrottle (struct usb_serial_port *port) } } -void usb_serial_generic_shutdown (struct usb_serial *serial) +void usb_serial_generic_shutdown(struct usb_serial *serial) { int i; dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) generic_cleanup(serial->port[i]); - } } diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 75b88b356eb..ab905869e95 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -9,7 +9,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver */ #include <linux/kernel.h> diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 2fd449bcfa3..bfa508ddb0f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -44,7 +44,7 @@ #include <linux/wait.h> #include <linux/firmware.h> #include <linux/ihex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "io_edgeport.h" @@ -66,16 +66,16 @@ /* receive port state */ enum RXSTATE { - EXPECT_HDR1 = 0, /* Expect header byte 1 */ - EXPECT_HDR2 = 1, /* Expect header byte 2 */ - EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ - EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ + EXPECT_HDR1 = 0, /* Expect header byte 1 */ + EXPECT_HDR2 = 1, /* Expect header byte 2 */ + EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ + EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ }; -/* Transmit Fifo - * This Transmit queue is an extension of the edgeport Rx buffer. - * The maximum amount of data buffered in both the edgeport +/* Transmit Fifo + * This Transmit queue is an extension of the edgeport Rx buffer. + * The maximum amount of data buffered in both the edgeport * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. */ struct TxFifo { @@ -132,12 +132,12 @@ struct edgeport_serial { int is_epic; /* flag if EPiC device or not */ __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ - unsigned char * interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ - struct urb * interrupt_read_urb; /* our interrupt urb */ + unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ + struct urb *interrupt_read_urb; /* our interrupt urb */ __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb * read_urb; /* our bulk read urb */ + unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ + struct urb *read_urb; /* our bulk read urb */ bool read_in_progress; spinlock_t es_lock; @@ -162,16 +162,17 @@ struct divisor_table_entry { __u16 Divisor; }; -// -// Define table of divisors for Rev A EdgePort/4 hardware -// These assume a 3.6864MHz crystal, the standard /16, and -// MCR.7 = 0. -// +/* + * Define table of divisors for Rev A EdgePort/4 hardware + * These assume a 3.6864MHz crystal, the standard /16, and + * MCR.7 = 0. + */ + static const struct divisor_table_entry divisor_table[] = { - { 50, 4608}, - { 75, 3072}, - { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ - { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ + { 50, 4608}, + { 75, 3072}, + { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ { 150, 1536}, { 300, 768}, { 600, 384}, @@ -194,64 +195,86 @@ static int debug; static int low_latency = 1; /* tty low latency flag, on by default */ -static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ +static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ /* local function prototypes */ /* function prototypes for all URB callbacks */ -static void edge_interrupt_callback (struct urb *urb); -static void edge_bulk_in_callback (struct urb *urb); -static void edge_bulk_out_data_callback (struct urb *urb); -static void edge_bulk_out_cmd_callback (struct urb *urb); +static void edge_interrupt_callback(struct urb *urb); +static void edge_bulk_in_callback(struct urb *urb); +static void edge_bulk_out_data_callback(struct urb *urb); +static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ -static int edge_open (struct usb_serial_port *port, struct file *filp); -static void edge_close (struct usb_serial_port *port, struct file *filp); -static int edge_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int edge_write_room (struct usb_serial_port *port); -static int edge_chars_in_buffer (struct usb_serial_port *port); -static void edge_throttle (struct usb_serial_port *port); -static void edge_unthrottle (struct usb_serial_port *port); -static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios); -static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg); -static void edge_break (struct usb_serial_port *port, int break_state); -static int edge_tiocmget (struct usb_serial_port *port, struct file *file); -static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); -static int edge_startup (struct usb_serial *serial); -static void edge_shutdown (struct usb_serial *serial); - +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void edge_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int edge_write_room(struct tty_struct *tty); +static int edge_chars_in_buffer(struct tty_struct *tty); +static void edge_throttle(struct tty_struct *tty); +static void edge_unthrottle(struct tty_struct *tty); +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); +static int edge_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void edge_break(struct tty_struct *tty, int break_state); +static int edge_tiocmget(struct tty_struct *tty, struct file *file); +static int edge_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static int edge_startup(struct usb_serial *serial); +static void edge_shutdown(struct usb_serial *serial); #include "io_tables.h" /* all of the devices that this driver supports */ /* function prototypes for all of our local functions */ -static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); -static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3); -static void edge_tty_recv (struct device *dev, struct tty_struct *tty, unsigned char *data, int length); -static void handle_new_msr (struct edgeport_port *edge_port, __u8 newMsr); -static void handle_new_lsr (struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data); -static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param); -static int calc_baud_rate_divisor (int baud_rate, int *divisor); -static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate); -static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios); -static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue); -static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength); -static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port); - -static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); -static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); -static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); -static void get_manufacturing_desc (struct edgeport_serial *edge_serial); -static void get_boot_desc (struct edgeport_serial *edge_serial); -static void load_application_firmware (struct edgeport_serial *edge_serial); - -static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size); - - -// ************************************************************************ -// ************************************************************************ -// ************************************************************************ -// ************************************************************************ + +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength); +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3); +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length); +static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data); +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, + __u8 param); +static int calc_baud_rate_divisor(int baud_rate, int *divisor); +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate); +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, + struct ktermios *old_termios); +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue); +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int writeLength); +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port); + +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, __u8 *data); +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static void get_manufacturing_desc(struct edgeport_serial *edge_serial); +static void get_boot_desc(struct edgeport_serial *edge_serial); +static void load_application_firmware(struct edgeport_serial *edge_serial); + +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size); + + +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ /************************************************************************ * * @@ -261,7 +284,7 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic * embedded in this driver * * * ************************************************************************/ -static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) +static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) { __u32 BootCurVer; __u32 BootNewVer; @@ -275,16 +298,14 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) int response; switch (edge_serial->product_info.iDownloadFile) { - case EDGE_DOWNLOAD_FILE_I930: - fw_name = "edgeport/boot.fw"; - break; - - case EDGE_DOWNLOAD_FILE_80251: - fw_name = "edgeport/boot2.fw"; - break; - - default: - return; + case EDGE_DOWNLOAD_FILE_I930: + fw_name = "edgeport/boot.fw"; + break; + case EDGE_DOWNLOAD_FILE_80251: + fw_name = "edgeport/boot2.fw"; + break; + default: + return; } response = request_ihex_firmware(&fw, fw_name, @@ -300,7 +321,7 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) BootMinorVersion = rec->data[1]; BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; - // Check Boot Image Version + /* Check Boot Image Version */ BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + (edge_serial->boot_descriptor.MinorVersion << 16) + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); @@ -352,29 +373,29 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) * Get string descriptor from device * * * ************************************************************************/ -static int get_string (struct usb_device *dev, int Id, char *string, int buflen) +static int get_string(struct usb_device *dev, int Id, char *string, int buflen) { struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id ); + dbg("%s - USB String ID = %d", __func__, Id); - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, + &StringDesc, sizeof(StringDesc))) return 0; - } - pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); - - if (!pStringDesc) { + pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + if (!pStringDesc) return 0; - } - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, + pStringDesc, StringDesc.bLength)) { kfree(pStringDesc); return 0; } - unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2); + unicode_to_ascii(string, buflen, + pStringDesc->wData, pStringDesc->bLength/2); kfree(pStringDesc); dbg("%s - USB String %s", __func__, string); @@ -388,24 +409,24 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen) * Get string descriptor from device * ************************************************************************/ -static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc) +static int get_string_desc(struct usb_device *dev, int Id, + struct usb_string_descriptor **pRetDesc) { struct usb_string_descriptor StringDesc; struct usb_string_descriptor *pStringDesc; - dbg("%s - USB String ID = %d", __func__, Id ); + dbg("%s - USB String ID = %d", __func__, Id); - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, + sizeof(StringDesc))) return 0; - } - pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL); - - if (!pStringDesc) { + pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + if (!pStringDesc) return -1; - } - if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) { + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, + StringDesc.bLength)) { kfree(pStringDesc); return -1; } @@ -417,25 +438,30 @@ static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_de static void dump_product_info(struct edgeport_product_info *product_info) { - // Dump Product Info structure + /* Dump Product Info structure */ dbg("**Product Information:"); - dbg(" ProductId %x", product_info->ProductId ); - dbg(" NumPorts %d", product_info->NumPorts ); - dbg(" ProdInfoVer %d", product_info->ProdInfoVer ); + dbg(" ProductId %x", product_info->ProductId); + dbg(" NumPorts %d", product_info->NumPorts); + dbg(" ProdInfoVer %d", product_info->ProdInfoVer); dbg(" IsServer %d", product_info->IsServer); - dbg(" IsRS232 %d", product_info->IsRS232 ); - dbg(" IsRS422 %d", product_info->IsRS422 ); - dbg(" IsRS485 %d", product_info->IsRS485 ); - dbg(" RomSize %d", product_info->RomSize ); - dbg(" RamSize %d", product_info->RamSize ); - dbg(" CpuRev %x", product_info->CpuRev ); + dbg(" IsRS232 %d", product_info->IsRS232); + dbg(" IsRS422 %d", product_info->IsRS422); + dbg(" IsRS485 %d", product_info->IsRS485); + dbg(" RomSize %d", product_info->RomSize); + dbg(" RamSize %d", product_info->RamSize); + dbg(" CpuRev %x", product_info->CpuRev); dbg(" BoardRev %x", product_info->BoardRev); dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, product_info->BootMinorVersion, le16_to_cpu(product_info->BootBuildNumber)); - dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0], - product_info->ManufactureDescDate[1], - product_info->ManufactureDescDate[2]+1900); + dbg(" FirmwareMajorVersion %d.%d.%d", + product_info->FirmwareMajorVersion, + product_info->FirmwareMinorVersion, + le16_to_cpu(product_info->FirmwareBuildNumber)); + dbg(" ManufactureDescDate %d/%d/%d", + product_info->ManufactureDescDate[0], + product_info->ManufactureDescDate[1], + product_info->ManufactureDescDate[2]+1900); dbg(" iDownloadFile 0x%x", product_info->iDownloadFile); dbg(" EpicVer %d", product_info->EpicVer); } @@ -444,55 +470,60 @@ static void get_product_info(struct edgeport_serial *edge_serial) { struct edgeport_product_info *product_info = &edge_serial->product_info; - memset (product_info, 0, sizeof(struct edgeport_product_info)); - - product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); - product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; - product_info->ProdInfoVer = 0; - - product_info->RomSize = edge_serial->manuf_descriptor.RomSize; - product_info->RamSize = edge_serial->manuf_descriptor.RamSize; - product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; - product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; - - product_info->BootMajorVersion = edge_serial->boot_descriptor.MajorVersion; - product_info->BootMinorVersion = edge_serial->boot_descriptor.MinorVersion; - product_info->BootBuildNumber = edge_serial->boot_descriptor.BuildNumber; - - memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate)); - - // check if this is 2nd generation hardware - if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) { - product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; - } else { - product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; - } - - // Determine Product type and set appropriate flags + memset(product_info, 0, sizeof(struct edgeport_product_info)); + + product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); + product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; + product_info->ProdInfoVer = 0; + + product_info->RomSize = edge_serial->manuf_descriptor.RomSize; + product_info->RamSize = edge_serial->manuf_descriptor.RamSize; + product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; + product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; + + product_info->BootMajorVersion = + edge_serial->boot_descriptor.MajorVersion; + product_info->BootMinorVersion = + edge_serial->boot_descriptor.MinorVersion; + product_info->BootBuildNumber = + edge_serial->boot_descriptor.BuildNumber; + + memcpy(product_info->ManufactureDescDate, + edge_serial->manuf_descriptor.DescDate, + sizeof(edge_serial->manuf_descriptor.DescDate)); + + /* check if this is 2nd generation hardware */ + if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) + & ION_DEVICE_ID_80251_NETCHIP) + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; + else + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; + + /* Determine Product type and set appropriate flags */ switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { - case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: - case ION_DEVICE_ID_EDGEPORT_4T: - case ION_DEVICE_ID_EDGEPORT_4: - case ION_DEVICE_ID_EDGEPORT_2: - case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: - case ION_DEVICE_ID_EDGEPORT_8: - case ION_DEVICE_ID_EDGEPORT_421: - case ION_DEVICE_ID_EDGEPORT_21: - case ION_DEVICE_ID_EDGEPORT_2_DIN: - case ION_DEVICE_ID_EDGEPORT_4_DIN: - case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: - product_info->IsRS232 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: + case ION_DEVICE_ID_EDGEPORT_4T: + case ION_DEVICE_ID_EDGEPORT_4: + case ION_DEVICE_ID_EDGEPORT_2: + case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: + case ION_DEVICE_ID_EDGEPORT_8: + case ION_DEVICE_ID_EDGEPORT_421: + case ION_DEVICE_ID_EDGEPORT_21: + case ION_DEVICE_ID_EDGEPORT_2_DIN: + case ION_DEVICE_ID_EDGEPORT_4_DIN: + case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: + product_info->IsRS232 = 1; + break; - case ION_DEVICE_ID_EDGEPORT_2I: // Edgeport/2 RS422/RS485 - product_info->IsRS422 = 1; - product_info->IsRS485 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ + product_info->IsRS422 = 1; + product_info->IsRS485 = 1; + break; - case ION_DEVICE_ID_EDGEPORT_8I: // Edgeport/4 RS422 - case ION_DEVICE_ID_EDGEPORT_4I: // Edgeport/4 RS422 - product_info->IsRS422 = 1; - break; + case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ + case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ + product_info->IsRS422 = 1; + break; } dump_product_info(product_info); @@ -520,32 +551,32 @@ static int get_epic_descriptor(struct edgeport_serial *ep) ep->is_epic = 1; memset(product_info, 0, sizeof(struct edgeport_product_info)); - product_info->NumPorts = epic->NumPorts; - product_info->ProdInfoVer = 0; - product_info->FirmwareMajorVersion = epic->MajorVersion; - product_info->FirmwareMinorVersion = epic->MinorVersion; - product_info->FirmwareBuildNumber = epic->BuildNumber; - product_info->iDownloadFile = epic->iDownloadFile; - product_info->EpicVer = epic->EpicVer; - product_info->Epic = epic->Supports; - product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; + product_info->NumPorts = epic->NumPorts; + product_info->ProdInfoVer = 0; + product_info->FirmwareMajorVersion = epic->MajorVersion; + product_info->FirmwareMinorVersion = epic->MinorVersion; + product_info->FirmwareBuildNumber = epic->BuildNumber; + product_info->iDownloadFile = epic->iDownloadFile; + product_info->EpicVer = epic->EpicVer; + product_info->Epic = epic->Supports; + product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; dump_product_info(product_info); bits = &ep->epic_descriptor.Supports; dbg("**EPIC descriptor:"); dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE"); - dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE" ); - dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE" ); - dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE" ); - dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE" ); - dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE" ); - dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE" ); - dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE" ); - dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE" ); - dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE" ); - dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE" ); - dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE" ); - dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE" ); + dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE"); + dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE"); + dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE"); + dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); + dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); + dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE"); + dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE"); + dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); + dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE"); + dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE"); + dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); + dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE"); } return result; @@ -561,10 +592,10 @@ static int get_epic_descriptor(struct edgeport_serial *ep) /***************************************************************************** * edge_interrupt_callback - * this is the callback function for when we have received data on the + * this is the callback function for when we have received data on the * interrupt endpoint. *****************************************************************************/ -static void edge_interrupt_callback (struct urb *urb) +static void edge_interrupt_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; struct edgeport_port *edge_port; @@ -589,17 +620,17 @@ static void edge_interrupt_callback (struct urb *urb) case -ESHUTDOWN: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", - __func__, status); + __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", - __func__, status); + dbg("%s - nonzero urb status received: %d", __func__, status); goto exit; } - // process this interrupt-read even if there are no ports open + /* process this interrupt-read even if there are no ports open */ if (length) { - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, + __func__, length, data); if (length > 1) { bytes_avail = data[0] | (data[1] << 8); @@ -613,7 +644,8 @@ static void edge_interrupt_callback (struct urb *urb) dbg("%s - posting a read", __func__); edge_serial->read_in_progress = true; - /* we have pending bytes on the bulk in pipe, send a request */ + /* we have pending bytes on the + bulk in pipe, send a request */ edge_serial->read_urb->dev = edge_serial->serial->dev; result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { @@ -627,7 +659,8 @@ static void edge_interrupt_callback (struct urb *urb) /* grab the txcredits for the ports if available */ position = 2; portNumber = 0; - while ((position < length) && (portNumber < edge_serial->serial->num_ports)) { + while ((position < length) && + (portNumber < edge_serial->serial->num_ports)) { txCredits = data[position] | (data[position+1] << 8); if (txCredits) { port = edge_serial->serial->port[portNumber]; @@ -636,14 +669,19 @@ static void edge_interrupt_callback (struct urb *urb) spin_lock(&edge_port->ep_lock); edge_port->txCredits += txCredits; spin_unlock(&edge_port->ep_lock); - dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits); - - /* tell the tty driver that something has changed */ - if (edge_port->port->tty) - tty_wakeup(edge_port->port->tty); - - // Since we have more credit, check if more data can be sent - send_more_port_data(edge_serial, edge_port); + dbg("%s - txcredits for port%d = %d", + __func__, portNumber, + edge_port->txCredits); + + /* tell the tty driver that something + has changed */ + if (edge_port->port->port.tty) + tty_wakeup(edge_port->port->port.tty); + + /* Since we have more credit, check + if more data can be sent */ + send_more_port_data(edge_serial, + edge_port); } } position += 2; @@ -652,19 +690,20 @@ static void edge_interrupt_callback (struct urb *urb) } exit: - result = usb_submit_urb (urb, GFP_ATOMIC); - if (result) { - dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - } + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __func__, result); } /***************************************************************************** * edge_bulk_in_callback - * this is the callback function for when we have received data on the + * this is the callback function for when we have received data on the * bulk in endpoint. *****************************************************************************/ -static void edge_bulk_in_callback (struct urb *urb) +static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; unsigned char *data = urb->transfer_buffer; @@ -689,16 +728,18 @@ static void edge_bulk_in_callback (struct urb *urb) raw_data_length = urb->actual_length; - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data); + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, + __func__, raw_data_length, data); spin_lock(&edge_serial->es_lock); /* decrement our rxBytes available by the number that we just got */ edge_serial->rxBytesAvail -= raw_data_length; - dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail); + dbg("%s - Received = %d, rxBytesAvail %d", __func__, + raw_data_length, edge_serial->rxBytesAvail); - process_rcvd_data (edge_serial, data, urb->actual_length); + process_rcvd_data(edge_serial, data, urb->actual_length); /* check to see if there's any more data for us to read */ if (edge_serial->rxBytesAvail > 0) { @@ -721,10 +762,10 @@ static void edge_bulk_in_callback (struct urb *urb) /***************************************************************************** * edge_bulk_out_data_callback - * this is the callback function for when we have finished sending serial data - * on the bulk out endpoint. + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. *****************************************************************************/ -static void edge_bulk_out_data_callback (struct urb *urb) +static void edge_bulk_out_data_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; struct tty_struct *tty; @@ -737,27 +778,29 @@ static void edge_bulk_out_data_callback (struct urb *urb) __func__, status); } - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; if (tty && edge_port->open) { - /* let the tty driver wakeup if it has a special write_wakeup function */ + /* let the tty driver wakeup if it has a special + write_wakeup function */ tty_wakeup(tty); } - // Release the Write URB + /* Release the Write URB */ edge_port->write_in_progress = false; - // Check if more data needs to be sent - send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port); + /* Check if more data needs to be sent */ + send_more_port_data((struct edgeport_serial *) + (usb_get_serial_data(edge_port->port->serial)), edge_port); } /***************************************************************************** * BulkOutCmdCallback - * this is the callback function for when we have finished sending a command - * on the bulk out endpoint. + * this is the callback function for when we have finished sending a + * command on the bulk out endpoint. *****************************************************************************/ -static void edge_bulk_out_cmd_callback (struct urb *urb) +static void edge_bulk_out_cmd_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; struct tty_struct *tty; @@ -766,22 +809,24 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) dbg("%s", __func__); atomic_dec(&CmdUrbs); - dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); + dbg("%s - FREE URB %p (outstanding %d)", __func__, + urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ kfree(urb->transfer_buffer); /* Free the command urb */ - usb_free_urb (urb); + usb_free_urb(urb); if (status) { - dbg("%s - nonzero write bulk status received: %d", __func__, status); + dbg("%s - nonzero write bulk status received: %d", + __func__, status); return; } /* Get pointer to tty */ - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; /* tell the tty driver that something has changed */ if (tty && edge_port->open) @@ -803,7 +848,8 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) * If successful, we return 0 * Otherwise we return a negative error number. *****************************************************************************/ -static int edge_open (struct usb_serial_port *port, struct file * filp) +static int edge_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct usb_serial *serial; @@ -815,55 +861,62 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) if (edge_port == NULL) return -ENODEV; - if (port->tty) - port->tty->low_latency = low_latency; + if (tty) + tty->low_latency = low_latency; - /* see if we've set up our endpoint info yet (can't set it up in edge_startup - as the structures were not set up at that time.) */ + /* see if we've set up our endpoint info yet (can't set it up + in edge_startup as the structures were not set up at that time.) */ serial = port->serial; edge_serial = usb_get_serial_data(serial); - if (edge_serial == NULL) { + if (edge_serial == NULL) return -ENODEV; - } if (edge_serial->interrupt_in_buffer == NULL) { struct usb_serial_port *port0 = serial->port[0]; - + /* not set up yet, so do it now */ - edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer; - edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress; + edge_serial->interrupt_in_buffer = + port0->interrupt_in_buffer; + edge_serial->interrupt_in_endpoint = + port0->interrupt_in_endpointAddress; edge_serial->interrupt_read_urb = port0->interrupt_in_urb; edge_serial->bulk_in_buffer = port0->bulk_in_buffer; - edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress; + edge_serial->bulk_in_endpoint = + port0->bulk_in_endpointAddress; edge_serial->read_urb = port0->read_urb; - edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress; - + edge_serial->bulk_out_endpoint = + port0->bulk_out_endpointAddress; + /* set up our interrupt urb */ usb_fill_int_urb(edge_serial->interrupt_read_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - port0->interrupt_in_endpointAddress), - port0->interrupt_in_buffer, - edge_serial->interrupt_read_urb->transfer_buffer_length, - edge_interrupt_callback, edge_serial, - edge_serial->interrupt_read_urb->interval); - + serial->dev, + usb_rcvintpipe(serial->dev, + port0->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + edge_serial->interrupt_read_urb->transfer_buffer_length, + edge_interrupt_callback, edge_serial, + edge_serial->interrupt_read_urb->interval); + /* set up our bulk in urb */ usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port0->bulk_in_endpointAddress), - port0->bulk_in_buffer, - edge_serial->read_urb->transfer_buffer_length, - edge_bulk_in_callback, edge_serial); + usb_rcvbulkpipe(serial->dev, + port0->bulk_in_endpointAddress), + port0->bulk_in_buffer, + edge_serial->read_urb->transfer_buffer_length, + edge_bulk_in_callback, edge_serial); edge_serial->read_in_progress = false; /* start interrupt read for this edgeport - * this interrupt will continue as long as the edgeport is connected */ - response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL); + * this interrupt will continue as long + * as the edgeport is connected */ + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); if (response) { - dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response); + dev_err(&port->dev, + "%s - Error %d submitting control urb\n", + __func__, response); } } - + /* initialize our wait queues */ init_waitqueue_head(&edge_port->wait_open); init_waitqueue_head(&edge_port->wait_chase); @@ -871,26 +924,29 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) init_waitqueue_head(&edge_port->wait_command); /* initialize our icount structure */ - memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount)); + memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); /* initialize our port settings */ - edge_port->txCredits = 0; /* Can't send any data yet */ - edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */ + edge_port->txCredits = 0; /* Can't send any data yet */ + /* Must always set this bit to enable ints! */ + edge_port->shadowMCR = MCR_MASTER_IE; edge_port->chaseResponsePending = false; /* send a open port command */ edge_port->openPending = true; edge_port->open = false; - response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0); + response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { - dev_err(&port->dev, "%s - error sending open port command\n", __func__); + dev_err(&port->dev, "%s - error sending open port command\n", + __func__); edge_port->openPending = false; return -ENODEV; } /* now wait for the port to be completely opened */ - wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT); + wait_event_timeout(edge_port->wait_open, !edge_port->openPending, + OPEN_TIMEOUT); if (!edge_port->open) { /* open timed out */ @@ -904,25 +960,26 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) edge_port->txfifo.tail = 0; edge_port->txfifo.count = 0; edge_port->txfifo.size = edge_port->maxTxCredits; - edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL); + edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); if (!edge_port->txfifo.fifo) { dbg("%s - no memory", __func__); - edge_close (port, filp); + edge_close(tty, port, filp); return -ENOMEM; } /* Allocate a URB for the write */ - edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL); + edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); edge_port->write_in_progress = false; if (!edge_port->write_urb) { dbg("%s - no memory", __func__); - edge_close (port, filp); + edge_close(tty, port, filp); return -ENOMEM; } - dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits); + dbg("%s(%d) - Initialize TX fifo to %d bytes", + __func__, port->number, edge_port->maxTxCredits); dbg("%s exited", __func__); @@ -948,27 +1005,28 @@ static void block_until_chase_response(struct edgeport_port *edge_port) int loop = 10; while (1) { - // Save Last credits + /* Save Last credits */ lastCredits = edge_port->txCredits; - // Did we get our Chase response + /* Did we get our Chase response */ if (!edge_port->chaseResponsePending) { dbg("%s - Got Chase Response", __func__); - // did we get all of our credit back? - if (edge_port->txCredits == edge_port->maxTxCredits ) { + /* did we get all of our credit back? */ + if (edge_port->txCredits == edge_port->maxTxCredits) { dbg("%s - Got all credits", __func__); return; } } - // Block the thread for a while - prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); if (lastCredits == edge_port->txCredits) { - // No activity.. count down. + /* No activity.. count down. */ loop--; if (loop == 0) { edge_port->chaseResponsePending = false; @@ -976,8 +1034,9 @@ static void block_until_chase_response(struct edgeport_port *edge_port) return; } } else { - // Reset timeout value back to 10 seconds - dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits); + /* Reset timeout value back to 10 seconds */ + dbg("%s - Last %d, Current %d", __func__, + lastCredits, edge_port->txCredits); loop = 10; } } @@ -994,7 +1053,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ -static void block_until_tx_empty (struct edgeport_port *edge_port) +static void block_until_tx_empty(struct edgeport_port *edge_port) { DEFINE_WAIT(wait); struct TxFifo *fifo = &edge_port->txfifo; @@ -1003,31 +1062,32 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) int loop = 30; while (1) { - // Save Last count + /* Save Last count */ lastCount = fifo->count; - // Is the Edgeport Buffer empty? + /* Is the Edgeport Buffer empty? */ if (lastCount == 0) { dbg("%s - TX Buffer Empty", __func__); return; } - // Block the thread for a while - prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE); + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); schedule_timeout(timeout); finish_wait(&edge_port->wait_chase, &wait); dbg("%s wait", __func__); if (lastCount == fifo->count) { - // No activity.. count down. + /* No activity.. count down. */ loop--; if (loop == 0) { dbg("%s - TIMEOUT", __func__); return; } } else { - // Reset timeout value back to seconds + /* Reset timeout value back to seconds */ loop = 30; } } @@ -1038,20 +1098,21 @@ static void block_until_tx_empty (struct edgeport_port *edge_port) * edge_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void edge_close (struct usb_serial_port *port, struct file * filp) +static void edge_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; int status; dbg("%s - port %d", __func__, port->number); - + edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); - if ((edge_serial == NULL) || (edge_port == NULL)) + if (edge_serial == NULL || edge_port == NULL) return; - - // block until tx is empty + + /* block until tx is empty */ block_until_tx_empty(edge_port); edge_port->closePending = true; @@ -1063,13 +1124,12 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); - if (status == 0) { - // block until chase finished + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); + if (status == 0) + /* block until chase finished */ block_until_chase_response(edge_port); - } else { + else edge_port->chaseResponsePending = false; - } } if ((!edge_serial->is_epic) || @@ -1077,10 +1137,10 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) (edge_serial->epic_descriptor.Supports.IOSPClose))) { /* close the port */ dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__); - send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0); + send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); } - //port->close = true; + /* port->close = true; */ edge_port->closePending = false; edge_port->open = false; edge_port->openPending = false; @@ -1088,7 +1148,8 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) usb_kill_urb(edge_port->write_urb); if (edge_port->write_urb) { - /* if this urb had a transfer buffer already (old transfer) free it */ + /* if this urb had a transfer buffer already + (old transfer) free it */ kfree(edge_port->write_urb->transfer_buffer); usb_free_urb(edge_port->write_urb); edge_port->write_urb = NULL; @@ -1097,16 +1158,17 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) edge_port->txfifo.fifo = NULL; dbg("%s exited", __func__); -} +} /***************************************************************************** * SerialWrite - * this function is called by the tty driver when data should be written to - * the port. - * If successful, we return the number of bytes written, otherwise we return - * a negative error number. + * this function is called by the tty driver when data should be written + * to the port. + * If successful, we return the number of bytes written, otherwise we + * return a negative error number. *****************************************************************************/ -static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count) +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct TxFifo *fifo; @@ -1121,66 +1183,76 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, if (edge_port == NULL) return -ENODEV; - // get a pointer to the Tx fifo + /* get a pointer to the Tx fifo */ fifo = &edge_port->txfifo; spin_lock_irqsave(&edge_port->ep_lock, flags); - // calculate number of bytes to put in fifo - copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count)); + /* calculate number of bytes to put in fifo */ + copySize = min((unsigned int)count, + (edge_port->txCredits - fifo->count)); - dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __func__, - port->number, count, edge_port->txCredits - fifo->count, copySize); + dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", + __func__, port->number, count, + edge_port->txCredits - fifo->count, copySize); - /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */ + /* catch writes of 0 bytes which the tty driver likes to give us, + and when txCredits is empty */ if (copySize == 0) { dbg("%s - copySize = Zero", __func__); goto finish_write; } - // queue the data - // since we can never overflow the buffer we do not have to check for full condition - - // the copy is done is two parts -- first fill to the end of the buffer - // then copy the reset from the start of the buffer - + /* queue the data + * since we can never overflow the buffer we do not have to check for a + * full condition + * + * the copy is done is two parts -- first fill to the end of the buffer + * then copy the reset from the start of the buffer + */ bytesleft = fifo->size - fifo->head; - firsthalf = min (bytesleft, copySize); - dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft); + firsthalf = min(bytesleft, copySize); + dbg("%s - copy %d bytes of %d into fifo ", __func__, + firsthalf, bytesleft); /* now copy our data */ memcpy(&fifo->fifo[fifo->head], data, firsthalf); - usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); + usb_serial_debug_data(debug, &port->dev, __func__, + firsthalf, &fifo->fifo[fifo->head]); - // update the index and size + /* update the index and size */ fifo->head += firsthalf; fifo->count += firsthalf; - // wrap the index - if (fifo->head == fifo->size) { + /* wrap the index */ + if (fifo->head == fifo->size) fifo->head = 0; - } secondhalf = copySize-firsthalf; if (secondhalf) { dbg("%s - copy rest of data %d", __func__, secondhalf); memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); - usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); - // update the index and size + usb_serial_debug_data(debug, &port->dev, __func__, + secondhalf, &fifo->fifo[fifo->head]); + /* update the index and size */ fifo->count += secondhalf; fifo->head += secondhalf; - // No need to check for wrap since we can not get to end of fifo in this part + /* No need to check for wrap since we can not get to end of + * the fifo in this part + */ } finish_write: spin_unlock_irqrestore(&edge_port->ep_lock, flags); - send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port); + send_more_port_data((struct edgeport_serial *) + usb_get_serial_data(port->serial), edge_port); - dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, + copySize, edge_port->txCredits, fifo->count); - return copySize; + return copySize; } @@ -1197,7 +1269,8 @@ finish_write: * can transmit more. * ************************************************************************/ -static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port) +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port) { struct TxFifo *fifo = &edge_port->txfifo; struct urb *urb; @@ -1216,67 +1289,78 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge if (edge_port->write_in_progress || !edge_port->open || (fifo->count == 0)) { - dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress); + dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", + __func__, edge_port->port->number, + fifo->count, edge_port->write_in_progress); goto exit_send; } - // since the amount of data in the fifo will always fit into the - // edgeport buffer we do not need to check the write length - - // Do we have enough credits for this port to make it worthwhile - // to bother queueing a write. If it's too small, say a few bytes, - // it's better to wait for more credits so we can do a larger - // write. - if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) { - dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits ); + /* since the amount of data in the fifo will always fit into the + * edgeport buffer we do not need to check the write length + * + * Do we have enough credits for this port to make it worthwhile + * to bother queueing a write. If it's too small, say a few bytes, + * it's better to wait for more credits so we can do a larger write. + */ + if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { + dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", + __func__, edge_port->port->number, fifo->count, + edge_port->txCredits); goto exit_send; } - // lock this write + /* lock this write */ edge_port->write_in_progress = true; - // get a pointer to the write_urb + /* get a pointer to the write_urb */ urb = edge_port->write_urb; /* make sure transfer buffer is freed */ kfree(urb->transfer_buffer); urb->transfer_buffer = NULL; - /* build the data header for the buffer and port that we are about to send out */ + /* build the data header for the buffer and port that we are about + to send out */ count = fifo->count; - buffer = kmalloc (count+2, GFP_ATOMIC); + buffer = kmalloc(count+2, GFP_ATOMIC); if (buffer == NULL) { - dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__); + dev_err(&edge_port->port->dev, + "%s - no more kernel memory...\n", __func__); edge_port->write_in_progress = false; goto exit_send; } - buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count); - buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count); + buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number + - edge_port->port->serial->minor, count); + buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number + - edge_port->port->serial->minor, count); /* now copy our data */ bytesleft = fifo->size - fifo->tail; - firsthalf = min (bytesleft, count); + firsthalf = min(bytesleft, count); memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); fifo->tail += firsthalf; fifo->count -= firsthalf; - if (fifo->tail == fifo->size) { + if (fifo->tail == fifo->size) fifo->tail = 0; - } secondhalf = count-firsthalf; if (secondhalf) { - memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf); + memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], + secondhalf); fifo->tail += secondhalf; fifo->count -= secondhalf; } if (count) - usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]); + usb_serial_debug_data(debug, &edge_port->port->dev, + __func__, count, &buffer[2]); /* fill up the urb with all of our data and submit it */ - usb_fill_bulk_urb (urb, edge_serial->serial->dev, - usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), - buffer, count+2, edge_bulk_out_data_callback, edge_port); + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, count+2, + edge_bulk_out_data_callback, edge_port); /* decrement the number of credits we have by the number we just sent */ edge_port->txCredits -= count; @@ -1286,14 +1370,17 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status); + dev_err(&edge_port->port->dev, + "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", + __func__, status); edge_port->write_in_progress = false; /* revert the credits as something bad happened. */ edge_port->txCredits += count; edge_port->icount.tx -= count; } - dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count); + dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", + __func__, count, edge_port->txCredits, fifo->count); exit_send: spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1302,14 +1389,14 @@ exit_send: /***************************************************************************** * edge_write_room - * this function is called by the tty driver when it wants to know how many - * bytes of data we can accept for a specific port. - * If successful, we return the amount of room that we have for this port - * (the txCredits), - * Otherwise we return a negative error number. + * this function is called by the tty driver when it wants to know how + * many bytes of data we can accept for a specific port. If successful, + * we return the amount of room that we have for this port (the txCredits) + * otherwise we return a negative error number. *****************************************************************************/ -static int edge_write_room (struct usb_serial_port *port) +static int edge_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int room; unsigned long flags; @@ -1317,18 +1404,18 @@ static int edge_write_room (struct usb_serial_port *port) dbg("%s", __func__); if (edge_port == NULL) - return -ENODEV; + return 0; if (edge_port->closePending) - return -ENODEV; + return 0; dbg("%s - port %d", __func__, port->number); if (!edge_port->open) { dbg("%s - port not opened", __func__); - return -EINVAL; + return 0; } - // total of both buffers is still txCredit + /* total of both buffers is still txCredit */ spin_lock_irqsave(&edge_port->ep_lock, flags); room = edge_port->txCredits - edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); @@ -1340,15 +1427,16 @@ static int edge_write_room (struct usb_serial_port *port) /***************************************************************************** * edge_chars_in_buffer - * this function is called by the tty driver when it wants to know how many - * bytes of data we currently have outstanding in the port (data that has - * been written, but hasn't made it out the port yet) - * If successful, we return the number of bytes left to be written in the - * system, + * this function is called by the tty driver when it wants to know how + * many bytes of data we currently have outstanding in the port (data that + * has been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, * Otherwise we return a negative error number. *****************************************************************************/ -static int edge_chars_in_buffer (struct usb_serial_port *port) +static int edge_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int num_chars; unsigned long flags; @@ -1356,20 +1444,22 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) dbg("%s", __func__); if (edge_port == NULL) - return -ENODEV; + return 0; if (edge_port->closePending) - return -ENODEV; + return 0; if (!edge_port->open) { dbg("%s - port not opened", __func__); - return -EINVAL; + return 0; } spin_lock_irqsave(&edge_port->ep_lock, flags); - num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count; + num_chars = edge_port->maxTxCredits - edge_port->txCredits + + edge_port->txfifo.count; spin_unlock_irqrestore(&edge_port->ep_lock, flags); if (num_chars) { - dbg("%s(port %d) - returns %d", __func__, port->number, num_chars); + dbg("%s(port %d) - returns %d", __func__, + port->number, num_chars); } return num_chars; @@ -1381,10 +1471,10 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) * this function is called by the tty driver when it wants to stop the data * being read from the port. *****************************************************************************/ -static void edge_throttle (struct usb_serial_port *port) +static void edge_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty; int status; dbg("%s - port %d", __func__, port->number); @@ -1397,28 +1487,21 @@ static void edge_throttle (struct usb_serial_port *port) return; } - tty = port->tty; - if (!tty) { - dbg ("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = edge_write (port, &stop_char, 1); - if (status <= 0) { + status = edge_write(tty, port, &stop_char, 1); + if (status <= 0) return; - } } /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { edge_port->shadowMCR &= ~MCR_RTS; - status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); - if (status != 0) { + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) return; - } } return; @@ -1427,13 +1510,13 @@ static void edge_throttle (struct usb_serial_port *port) /***************************************************************************** * edge_unthrottle - * this function is called by the tty driver when it wants to resume the data - * being read from the port (called after SerialThrottle is called) + * this function is called by the tty driver when it wants to resume the + * data being read from the port (called after SerialThrottle is called) *****************************************************************************/ -static void edge_unthrottle (struct usb_serial_port *port) +static void edge_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty; int status; dbg("%s - port %d", __func__, port->number); @@ -1446,43 +1529,31 @@ static void edge_unthrottle (struct usb_serial_port *port) return; } - tty = port->tty; - if (!tty) { - dbg ("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); - status = edge_write (port, &start_char, 1); - if (status <= 0) { + status = edge_write(tty, port, &start_char, 1); + if (status <= 0) return; - } } - /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { edge_port->shadowMCR |= MCR_RTS; - status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); - if (status != 0) { - return; - } + send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); } - - return; } /***************************************************************************** * SerialSetTermios - * this function is called by the tty driver when it wants to change the termios structure + * this function is called by the tty driver when it wants to change + * the termios structure *****************************************************************************/ -static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - /* FIXME: This function appears unused ?? */ struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned int cflag; cflag = tty->termios->c_cflag; @@ -1502,9 +1573,7 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old } /* change the port settings to the new ones specified */ - change_port_settings (edge_port, old_termios); - - return; + change_port_settings(tty, edge_port, old_termios); } @@ -1516,9 +1585,10 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old * release the bus after transmitting. This must be done when * the transmit shift register is empty, not be done when the * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. + * allows an RS485 driver to be written in user space. *****************************************************************************/ -static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value) +static int get_lsr_info(struct edgeport_port *edge_port, + unsigned int __user *value) { unsigned int result = 0; unsigned long flags; @@ -1536,25 +1606,10 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va return 0; } -static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int __user *value) -{ - unsigned int result = 0; - struct tty_struct *tty = edge_port->port->tty; - - if (!tty) - return -ENOIOCTLCMD; - - result = tty->read_cnt; - - dbg("%s(%d) = %d", __func__, edge_port->port->number, result); - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - //return 0; - return -ENOIOCTLCMD; -} - -static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) +static int edge_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; @@ -1582,8 +1637,9 @@ static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsig return 0; } -static int edge_tiocmget(struct usb_serial_port *port, struct file *file) +static int edge_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int result = 0; unsigned int msr; @@ -1606,7 +1662,8 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) return result; } -static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) +static int get_serial_info(struct edgeport_port *edge_port, + struct serial_struct __user *retinfo) { struct serial_struct tmp; @@ -1624,9 +1681,6 @@ static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct tmp.baud_base = 9600; tmp.close_delay = 5*HZ; tmp.closing_wait = 30*HZ; -// tmp.custom_divisor = state->custom_divisor; -// tmp.hub6 = state->hub6; -// tmp.io_type = state->io_type; if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; @@ -1639,8 +1693,10 @@ static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct * SerialIoctl * this function handles any ioctl calls to the driver *****************************************************************************/ -static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) +static int edge_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; DEFINE_WAIT(wait); struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct async_icount cnow; @@ -1650,71 +1706,61 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { - // return number of bytes available - case TIOCINQ: - dbg("%s (%d) TIOCINQ", __func__, port->number); - return get_number_bytes_avail(edge_port, (unsigned int __user *) arg); - break; - - case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return get_lsr_info(edge_port, (unsigned int __user *) arg); - return 0; - - case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); - return get_serial_info(edge_port, (struct serial_struct __user *) arg); - - case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); - break; - - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - cprev = edge_port->icount; - while (1) { - prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&edge_port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; + case TIOCSERGETLSR: + dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + return get_lsr_info(edge_port, (unsigned int __user *) arg); + + case TIOCGSERIAL: + dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + return get_serial_info(edge_port, (struct serial_struct __user *) arg); + + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + cprev = edge_port->icount; + while (1) { + prepare_to_wait(&edge_port->delta_msr_wait, + &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(&edge_port->delta_msr_wait, &wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = edge_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; } - /* NOTREACHED */ - break; + cprev = cnow; + } + /* NOTREACHED */ + break; - case TIOCGICOUNT: - cnow = edge_port->icount; - memset(&icount, 0, sizeof(icount)); - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx ); - if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) - return -EFAULT; - return 0; + case TIOCGICOUNT: + cnow = edge_port->icount; + memset(&icount, 0, sizeof(icount)); + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", + __func__, port->number, icount.rx, icount.tx); + if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) + return -EFAULT; + return 0; } - return -ENOIOCTLCMD; } @@ -1723,8 +1769,9 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned * SerialBreak * this function sends a break to the port *****************************************************************************/ -static void edge_break (struct usb_serial_port *port, int break_state) +static void edge_break(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial); int status; @@ -1736,9 +1783,9 @@ static void edge_break (struct usb_serial_port *port, int break_state) edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); if (status == 0) { - // block until chase finished + /* block until chase finished */ block_until_chase_response(edge_port); } else { edge_port->chaseResponsePending = false; @@ -1750,14 +1797,16 @@ static void edge_break (struct usb_serial_port *port, int break_state) (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { if (break_state == -1) { dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_BREAK, 0); } else { dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__); - status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0); - } - if (status) { - dbg("%s - error sending break set/clear command.", __func__); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_CLEAR_BREAK, 0); } + if (status) + dbg("%s - error sending break set/clear command.", + __func__); } return; @@ -1768,7 +1817,8 @@ static void edge_break (struct usb_serial_port *port, int break_state) * process_rcvd_data * this function handles the data received on the bulk in pipe. *****************************************************************************/ -static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength) +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength) { struct usb_serial_port *port; struct edgeport_port *edge_port; @@ -1789,105 +1839,123 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha lastBufferLength = bufferLength; switch (edge_serial->rxState) { - case EXPECT_HDR1: - edge_serial->rxHeader1 = *buffer; - ++buffer; - --bufferLength; + case EXPECT_HDR1: + edge_serial->rxHeader1 = *buffer; + ++buffer; + --bufferLength; - if (bufferLength == 0) { - edge_serial->rxState = EXPECT_HDR2; + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_HDR2; + break; + } + /* otherwise, drop on through */ + case EXPECT_HDR2: + edge_serial->rxHeader2 = *buffer; + ++buffer; + --bufferLength; + + dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, + edge_serial->rxHeader1, edge_serial->rxHeader2); + /* Process depending on whether this header is + * data or status */ + + if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { + /* Decode this status header and go to + * EXPECT_HDR1 (if we can process the status + * with only 2 bytes), or go to EXPECT_HDR3 to + * get the third byte. */ + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxStatusCode = + IOSP_GET_STATUS_CODE( + edge_serial->rxHeader1); + + if (!IOSP_STATUS_IS_2BYTE( + edge_serial->rxStatusCode)) { + /* This status needs additional bytes. + * Save what we have and then wait for + * more data. + */ + edge_serial->rxStatusParam + = edge_serial->rxHeader2; + edge_serial->rxState = EXPECT_HDR3; break; } - /* otherwise, drop on through */ - - case EXPECT_HDR2: - edge_serial->rxHeader2 = *buffer; - ++buffer; - --bufferLength; - - dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2); - - // Process depending on whether this header is - // data or status - - if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { - // Decode this status header and goto EXPECT_HDR1 (if we - // can process the status with only 2 bytes), or goto - // EXPECT_HDR3 to get the third byte. - - edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); - edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1); - - if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) { - // This status needs additional bytes. Save what we have - // and then wait for more data. - edge_serial->rxStatusParam = edge_serial->rxHeader2; - - edge_serial->rxState = EXPECT_HDR3; - break; - } + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxHeader2, 0); + edge_serial->rxState = EXPECT_HDR1; + break; + } else { + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxBytesRemaining = + IOSP_GET_HDR_DATA_LEN( + edge_serial->rxHeader1, + edge_serial->rxHeader2); + dbg("%s - Data for Port %u Len %u", + __func__, + edge_serial->rxPort, + edge_serial->rxBytesRemaining); + + /* ASSERT(DevExt->RxPort < DevExt->NumPorts); + * ASSERT(DevExt->RxBytesRemaining < + * IOSP_MAX_DATA_LENGTH); + */ - // We have all the header bytes, process the status now - process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0); - edge_serial->rxState = EXPECT_HDR1; + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_DATA; break; - } else { - edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1); - edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2); - - dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining); - - //ASSERT( DevExt->RxPort < DevExt->NumPorts ); - //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH ); - - if (bufferLength == 0 ) { - edge_serial->rxState = EXPECT_DATA; - break; - } - // Else, drop through } + /* Else, drop through */ + } + case EXPECT_DATA: /* Expect data */ + if (bufferLength < edge_serial->rxBytesRemaining) { + rxLen = bufferLength; + /* Expect data to start next buffer */ + edge_serial->rxState = EXPECT_DATA; + } else { + /* BufLen >= RxBytesRemaining */ + rxLen = edge_serial->rxBytesRemaining; + /* Start another header next time */ + edge_serial->rxState = EXPECT_HDR1; + } - case EXPECT_DATA: // Expect data - - if (bufferLength < edge_serial->rxBytesRemaining) { - rxLen = bufferLength; - edge_serial->rxState = EXPECT_DATA; // Expect data to start next buffer - } else { - // BufLen >= RxBytesRemaining - rxLen = edge_serial->rxBytesRemaining; - edge_serial->rxState = EXPECT_HDR1; // Start another header next time - } + bufferLength -= rxLen; + edge_serial->rxBytesRemaining -= rxLen; - bufferLength -= rxLen; - edge_serial->rxBytesRemaining -= rxLen; - - /* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[edge_serial->rxPort]; - edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { - tty = edge_port->port->tty; - if (tty) { - dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort); - edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); - } - edge_port->icount.rx += rxLen; + /* spit this data back into the tty driver if this + port is open */ + if (rxLen) { + port = edge_serial->serial->port[ + edge_serial->rxPort]; + edge_port = usb_get_serial_port_data(port); + if (edge_port->open) { + tty = edge_port->port->port.tty; + if (tty) { + dbg("%s - Sending %d bytes to TTY for port %d", + __func__, rxLen, edge_serial->rxPort); + edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen); } - buffer += rxLen; + edge_port->icount.rx += rxLen; } + buffer += rxLen; + } + break; - break; - - case EXPECT_HDR3: // Expect 3rd byte of status header - edge_serial->rxHeader3 = *buffer; - ++buffer; - --bufferLength; - - // We have all the header bytes, process the status now - process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3); - edge_serial->rxState = EXPECT_HDR1; - break; - + case EXPECT_HDR3: /* Expect 3rd byte of status header */ + edge_serial->rxHeader3 = *buffer; + ++buffer; + --bufferLength; + + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxStatusParam, + edge_serial->rxHeader3); + edge_serial->rxState = EXPECT_HDR1; + break; } } } @@ -1895,9 +1963,11 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha /***************************************************************************** * process_rcvd_status - * this function handles the any status messages received on the bulk in pipe. + * this function handles the any status messages received on the + * bulk in pipe. *****************************************************************************/ -static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3) +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3) { struct usb_serial_port *port; struct edgeport_port *edge_port; @@ -1907,7 +1977,9 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) { - dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort); + dev_err(&edge_serial->serial->dev->dev, + "%s - edge_port == NULL for port %d\n", + __func__, edge_serial->rxPort); return; } @@ -1915,22 +1987,28 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 if (code == IOSP_EXT_STATUS) { switch (byte2) { - case IOSP_EXT_STATUS_CHASE_RSP: - // we want to do EXT status regardless of port open/closed - dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 ); - // Currently, the only EXT_STATUS is Chase, so process here instead of one more call - // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do. - // Also, we currently clear flag and close the port regardless of content of above's Byte3. - // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport, - // like wait longer in block_until_chase_response, but for now we don't. - edge_port->chaseResponsePending = false; - wake_up (&edge_port->wait_chase); - return; + case IOSP_EXT_STATUS_CHASE_RSP: + /* we want to do EXT status regardless of port + * open/closed */ + dbg("%s - Port %u EXT CHASE_RSP Data = %02x", + __func__, edge_serial->rxPort, byte3); + /* Currently, the only EXT_STATUS is Chase, so process + * here instead of one more call to one more subroutine + * If/when more EXT_STATUS, there'll be more work to do + * Also, we currently clear flag and close the port + * regardless of content of above's Byte3. + * We could choose to do something else when Byte3 says + * Timeout on Chase from Edgeport, like wait longer in + * block_until_chase_response, but for now we don't. + */ + edge_port->chaseResponsePending = false; + wake_up(&edge_port->wait_chase); + return; - case IOSP_EXT_STATUS_RX_CHECK_RSP: - dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 ); - //Port->RxCheckRsp = true; - return; + case IOSP_EXT_STATUS_RX_CHECK_RSP: + dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3); + /* Port->RxCheckRsp = true; */ + return; } } @@ -1938,11 +2016,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); - handle_new_msr (edge_port, byte2); + handle_new_msr(edge_port, byte2); - /* send the current line settings to the port so we are in sync with any further termios calls */ - if (edge_port->port->tty) - change_port_settings (edge_port, edge_port->port->tty->termios); + /* send the current line settings to the port so we are + in sync with any further termios calls */ + /* FIXME: locking on tty */ + if (edge_port->port->port.tty) + change_port_settings(edge_port->port->port.tty, + edge_port, edge_port->port->port.tty->termios); /* we have completed the open */ edge_port->openPending = false; @@ -1951,45 +2032,49 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 return; } - // If port is closed, silently discard all rcvd status. We can - // have cases where buffered status is received AFTER the close - // port command is sent to the Edgeport. - if (!edge_port->open || edge_port->closePending) { + /* If port is closed, silently discard all rcvd status. We can + * have cases where buffered status is received AFTER the close + * port command is sent to the Edgeport. + */ + if (!edge_port->open || edge_port->closePending) return; - } switch (code) { - // Not currently sent by Edgeport - case IOSP_STATUS_LSR: - dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2); - handle_new_lsr(edge_port, false, byte2, 0); - break; + /* Not currently sent by Edgeport */ + case IOSP_STATUS_LSR: + dbg("%s - Port %u LSR Status = %02x", + __func__, edge_serial->rxPort, byte2); + handle_new_lsr(edge_port, false, byte2, 0); + break; - case IOSP_STATUS_LSR_DATA: - dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); - // byte2 is LSR Register - // byte3 is broken data byte - handle_new_lsr(edge_port, true, byte2, byte3); - break; - // - // case IOSP_EXT_4_STATUS: - // dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3); - // break; - // - case IOSP_STATUS_MSR: - dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2); - - // Process this new modem status and generate appropriate - // events, etc, based on the new status. This routine - // also saves the MSR in Port->ShadowMsr. - handle_new_msr(edge_port, byte2); - break; + case IOSP_STATUS_LSR_DATA: + dbg("%s - Port %u LSR Status = %02x, Data = %02x", + __func__, edge_serial->rxPort, byte2, byte3); + /* byte2 is LSR Register */ + /* byte3 is broken data byte */ + handle_new_lsr(edge_port, true, byte2, byte3); + break; + /* + * case IOSP_EXT_4_STATUS: + * dbg("%s - Port %u LSR Status = %02x Data = %02x", + * __func__, edge_serial->rxPort, byte2, byte3); + * break; + */ + case IOSP_STATUS_MSR: + dbg("%s - Port %u MSR Status = %02x", + __func__, edge_serial->rxPort, byte2); + /* + * Process this new modem status and generate appropriate + * events, etc, based on the new status. This routine + * also saves the MSR in Port->ShadowMsr. + */ + handle_new_msr(edge_port, byte2); + break; - default: - dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); - break; + default: + dbg("%s - Unrecognized IOSP status code %u\n", __func__, code); + break; } - return; } @@ -1998,7 +2083,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 * edge_tty_recv * this function passes data on to the tty flip buffer *****************************************************************************/ -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length) +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length) { int cnt; @@ -2007,7 +2093,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c if (cnt < length) { dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); - if(cnt == 0) + if (cnt == 0) break; } tty_insert_flip_string(tty, data, cnt); @@ -2029,22 +2115,19 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) dbg("%s %02x", __func__, newMsr); - if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { + if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | + EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; /* update input line counters */ - if (newMsr & EDGEPORT_MSR_DELTA_CTS) { + if (newMsr & EDGEPORT_MSR_DELTA_CTS) icount->cts++; - } - if (newMsr & EDGEPORT_MSR_DELTA_DSR) { + if (newMsr & EDGEPORT_MSR_DELTA_DSR) icount->dsr++; - } - if (newMsr & EDGEPORT_MSR_DELTA_CD) { + if (newMsr & EDGEPORT_MSR_DELTA_CD) icount->dcd++; - } - if (newMsr & EDGEPORT_MSR_DELTA_RI) { + if (newMsr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - } wake_up_interruptible(&edge_port->delta_msr_wait); } @@ -2059,42 +2142,41 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) * handle_new_lsr * this function handles any change to the lsr register for a port. *****************************************************************************/ -static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data) +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data) { - __u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); - struct async_icount *icount; + __u8 newLsr = (__u8) (lsr & (__u8) + (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); + struct async_icount *icount; dbg("%s - %02x", __func__, newLsr); edge_port->shadowLSR = lsr; if (newLsr & LSR_BREAK) { - // - // Parity and Framing errors only count if they - // occur exclusive of a break being - // received. - // + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); } /* Place LSR data byte into Rx buffer */ - if (lsrData && edge_port->port->tty) - edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1); + if (lsrData && edge_port->port->port.tty) + edge_tty_recv(&edge_port->port->dev, + edge_port->port->port.tty, &data, 1); /* update input line counters */ icount = &edge_port->icount; - if (newLsr & LSR_BREAK) { + if (newLsr & LSR_BREAK) icount->brk++; - } - if (newLsr & LSR_OVER_ERR) { + if (newLsr & LSR_OVER_ERR) icount->overrun++; - } - if (newLsr & LSR_PAR_ERR) { + if (newLsr & LSR_PAR_ERR) icount->parity++; - } - if (newLsr & LSR_FRM_ERR) { + if (newLsr & LSR_FRM_ERR) icount->frame++; - } return; } @@ -2102,12 +2184,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l /**************************************************************************** * sram_write - * writes a number of bytes to the Edgeport device's sram starting at the + * writes a number of bytes to the Edgeport device's sram starting at the * given address. * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) { int result; __u16 current_length; @@ -2115,32 +2198,37 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, 64); return -ENOMEM; } /* need to split these writes up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); - memcpy (transfer_buffer, data, current_length); - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM, - 0x40, addr, extAddr, transfer_buffer, current_length, 300); + +/* dbg("%s - writing %x, %x, %d", __func__, + extAddr, addr, current_length); */ + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_RAM, + 0x40, addr, extAddr, transfer_buffer, + current_length, 300); if (result < 0) break; length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2152,40 +2240,45 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1 * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) { int result; __u16 current_length; unsigned char *transfer_buffer; -// dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); +/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */ - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", + __func__, 64); return -ENOMEM; } /* need to split these writes up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length); - memcpy (transfer_buffer, data, current_length); - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM, - 0x40, addr, extAddr, transfer_buffer, current_length, 300); +/* dbg("%s - writing %x, %x, %d", __func__, + extAddr, addr, current_length); */ + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_ROM, 0x40, + addr, extAddr, + transfer_buffer, current_length, 300); if (result < 0) break; length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2197,7 +2290,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 * If successful returns the number of bytes read, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) +static int rom_read(struct usb_serial *serial, __u16 extAddr, + __u16 addr, __u16 length, __u8 *data) { int result; __u16 current_length; @@ -2205,32 +2299,36 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); - transfer_buffer = kmalloc (64, GFP_KERNEL); + transfer_buffer = kmalloc(64, GFP_KERNEL); if (!transfer_buffer) { - dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64); + dev_err(&serial->dev->dev, + "%s - kmalloc(%d) failed.\n", __func__, 64); return -ENOMEM; } /* need to split these reads up into 64 byte chunks */ result = 0; while (length > 0) { - if (length > 64) { + if (length > 64) current_length = 64; - } else { + else current_length = length; - } -// dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length); - result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM, - 0xC0, addr, extAddr, transfer_buffer, current_length, 300); +/* dbg("%s - %x, %x, %d", __func__, + extAddr, addr, current_length); */ + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + USB_REQUEST_ION_READ_ROM, + 0xC0, addr, extAddr, transfer_buffer, + current_length, 300); if (result < 0) break; - memcpy (data, transfer_buffer, current_length); + memcpy(data, transfer_buffer, current_length); length -= current_length; addr += current_length; data += current_length; - } + } - kfree (transfer_buffer); + kfree(transfer_buffer); return result; } @@ -2239,7 +2337,8 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 * send_iosp_ext_cmd * Is used to send a IOSP message to the Edgeport device ****************************************************************************/ -static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param) +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, + __u8 command, __u8 param) { unsigned char *buffer; unsigned char *currentCommand; @@ -2248,19 +2347,20 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u dbg("%s - %d, %d", __func__, command, param); - buffer = kmalloc (10, GFP_ATOMIC); + buffer = kmalloc(10, GFP_ATOMIC); if (!buffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10); + dev_err(&edge_port->port->dev, + "%s - kmalloc(%d) failed.\n", __func__, 10); return -ENOMEM; } currentCommand = buffer; - MAKE_CMD_EXT_CMD (¤tCommand, &length, - edge_port->port->number - edge_port->port->serial->minor, - command, param); + MAKE_CMD_EXT_CMD(¤tCommand, &length, + edge_port->port->number - edge_port->port->serial->minor, + command, param); - status = write_cmd_usb (edge_port, buffer, length); + status = write_cmd_usb(edge_port, buffer, length); if (status) { /* something bad happened, let's free up the memory */ kfree(buffer); @@ -2274,43 +2374,50 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u * write_cmd_usb * this function writes the given buffer out to the bulk write endpoint. *****************************************************************************/ -static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length) +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int length) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); int status = 0; struct urb *urb; int timeout; - usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer); + usb_serial_debug_data(debug, &edge_port->port->dev, + __func__, length, buffer); /* Allocate our next urb */ - urb = usb_alloc_urb (0, GFP_ATOMIC); + urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) return -ENOMEM; atomic_inc(&CmdUrbs); - dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs)); + dbg("%s - ALLOCATE URB %p (outstanding %d)", + __func__, urb, atomic_read(&CmdUrbs)); - usb_fill_bulk_urb (urb, edge_serial->serial->dev, - usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), - buffer, length, edge_bulk_out_cmd_callback, edge_port); + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, length, edge_bulk_out_cmd_callback, edge_port); edge_port->commandPending = true; status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status); + dev_err(&edge_port->port->dev, + "%s - usb_submit_urb(write command) failed, status = %d\n", + __func__, status); usb_kill_urb(urb); usb_free_urb(urb); atomic_dec(&CmdUrbs); return status; } - // wait for command to finish + /* wait for command to finish */ timeout = COMMAND_TIMEOUT; #if 0 - wait_event (&edge_port->wait_command, !edge_port->commandPending); + wait_event(&edge_port->wait_command, !edge_port->commandPending); if (edge_port->commandPending) { /* command timed out */ @@ -2327,15 +2434,18 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer * this function sends the proper command to change the baud rate of the * specified port. *****************************************************************************/ -static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate) +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); unsigned char *cmdBuffer; unsigned char *currCmd; int cmdLen = 0; int divisor; int status; - unsigned char number = edge_port->port->number - edge_port->port->serial->minor; + unsigned char number = + edge_port->port->number - edge_port->port->serial->minor; if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { @@ -2344,36 +2454,40 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa return 0; } - dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate); + dbg("%s - port = %d, baud = %d", __func__, + edge_port->port->number, baudRate); - status = calc_baud_rate_divisor (baudRate, &divisor); + status = calc_baud_rate_divisor(baudRate, &divisor); if (status) { - dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__); + dev_err(&edge_port->port->dev, "%s - bad baud rate\n", + __func__); return status; } - // Alloc memory for the string of commands. - cmdBuffer = kmalloc (0x100, GFP_ATOMIC); + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x100, GFP_ATOMIC); if (!cmdBuffer) { - dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100); + dev_err(&edge_port->port->dev, + "%s - kmalloc(%d) failed.\n", __func__, 0x100); return -ENOMEM; } currCmd = cmdBuffer; - // Enable access to divisor latch - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE ); + /* Enable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); - // Write the divisor itself - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) ); - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) ); + /* Write the divisor itself */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); - // Restore original value to disable access to divisor latch - MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR); + /* Restore original value to disable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, + edge_port->shadowLCR); - status = write_cmd_usb(edge_port, cmdBuffer, cmdLen ); + status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); if (status) { /* something bad happened, let's free up the memory */ - kfree (cmdBuffer); + kfree(cmdBuffer); } return status; @@ -2385,7 +2499,7 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor (int baudrate, int *divisor) +static int calc_baud_rate_divisor(int baudrate, int *divisor) { int i; __u16 custom; @@ -2394,17 +2508,17 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) dbg("%s - %d", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { - if ( divisor_table[i].BaudRate == baudrate ) { + if (divisor_table[i].BaudRate == baudrate) { *divisor = divisor_table[i].Divisor; return 0; } } - // We have tried all of the standard baud rates - // lets try to calculate the divisor for this baud rate - // Make sure the baud rate is reasonable + /* We have tried all of the standard baud rates + * lets try to calculate the divisor for this baud rate + * Make sure the baud rate is reasonable */ if (baudrate > 50 && baudrate < 230400) { - // get divisor + /* get divisor */ custom = (__u16)((230400L + baudrate/2) / baudrate); *divisor = custom; @@ -2419,17 +2533,20 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to to the device. *****************************************************************************/ -static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); unsigned char *cmdBuffer; unsigned char *currCmd; unsigned long cmdLen = 0; int status; - dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); + dbg("%s - write to %s register 0x%02x", + (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && @@ -2441,27 +2558,26 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r if (edge_serial->is_epic && !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && regNum == LCR) { - dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); + dbg("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; } - // Alloc memory for the string of commands. - cmdBuffer = kmalloc (0x10, GFP_ATOMIC); - if (cmdBuffer == NULL ) { + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x10, GFP_ATOMIC); + if (cmdBuffer == NULL) return -ENOMEM; - } currCmd = cmdBuffer; - // Build a cmd in the buffer to write the given register - MAKE_CMD_WRITE_REG (&currCmd, &cmdLen, - edge_port->port->number - edge_port->port->serial->minor, - regNum, regValue); + /* Build a cmd in the buffer to write the given register */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, + edge_port->port->number - edge_port->port->serial->minor, + regNum, regValue); status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); if (status) { /* something bad happened, let's free up the memory */ - kfree (cmdBuffer); + kfree(cmdBuffer); } return status; @@ -2470,16 +2586,15 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r /***************************************************************************** * change_port_settings - * This routine is called to set the UART on the device to match the specified - * new settings. + * This routine is called to set the UART on the device to match the + * specified new settings. *****************************************************************************/ -#ifndef CMSPAR -#define CMSPAR 0 -#endif -static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios) + +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, struct ktermios *old_termios) { - struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial); - struct tty_struct *tty; + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); int baud; unsigned cflag; __u8 mask = 0xff; @@ -2498,21 +2613,26 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi return; } - tty = edge_port->port->tty; - if ((!tty) || - (!tty->termios)) { - dbg("%s - no tty structures", __func__); - return; - } - cflag = tty->termios->c_cflag; switch (cflag & CSIZE) { - case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __func__); break; - case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __func__); break; - case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __func__); break; - default: - case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __func__); break; + case CS5: + lData = LCR_BITS_5; mask = 0x1f; + dbg("%s - data bits = 5", __func__); + break; + case CS6: + lData = LCR_BITS_6; mask = 0x3f; + dbg("%s - data bits = 6", __func__); + break; + case CS7: + lData = LCR_BITS_7; mask = 0x7f; + dbg("%s - data bits = 7", __func__); + break; + default: + case CS8: + lData = LCR_BITS_8; + dbg("%s - data bits = 8", __func__); + break; } lParity = LCR_PAR_NONE; @@ -2554,7 +2674,8 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi dbg("%s - RTS/CTS is disabled", __func__); } - /* if we are implementing XON/XOFF, set the start and stop character in the device */ + /* if we are implementing XON/XOFF, set the start and stop character + in the device */ if (I_IXOFF(tty) || I_IXON(tty)) { unsigned char stop_char = STOP_CHAR(tty); unsigned char start_char = START_CHAR(tty); @@ -2562,14 +2683,17 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi if ((!edge_serial->is_epic) || ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) { - send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char); - send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char); + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XON_CHAR, start_char); + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XOFF_CHAR, stop_char); } /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { rxFlow |= IOSP_RX_FLOW_XON_XOFF; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); + dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, start_char, stop_char); } else { dbg("%s - INBOUND XON/XOFF is disabled", __func__); } @@ -2577,7 +2701,8 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { txFlow |= IOSP_TX_FLOW_XON_XOFF; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char); + dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, start_char, stop_char); } else { dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); } @@ -2600,20 +2725,20 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi edge_port->validDataMask = mask; /* Send the updated LCR value to the EdgePort */ - status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR); - if (status != 0) { + status = send_cmd_write_uart_register(edge_port, LCR, + edge_port->shadowLCR); + if (status != 0) return; - } /* set up the MCR register and send it to the EdgePort */ edge_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) { + if (cflag & CBAUD) edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); - } - status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); - if (status != 0) { + + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) return; - } /* Determine divisor based on baud rate */ baud = tty_get_baud_rate(tty); @@ -2623,7 +2748,7 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi } dbg("%s - baud rate = %d", __func__, baud); - status = send_cmd_write_baud_rate (edge_port, baud); + status = send_cmd_write_baud_rate(edge_port, baud); if (status == -1) { /* Speed change was not possible - put back the old speed */ baud = tty_termios_baud_rate(old_termios); @@ -2640,7 +2765,8 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi * ASCII range, but it's only for debugging... * NOTE: expects the unicode in LE format ****************************************************************************/ -static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size) +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size) { int i; @@ -2659,75 +2785,99 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic /**************************************************************************** * get_manufacturing_desc - * reads in the manufacturing descriptor and stores it into the serial + * reads in the manufacturing descriptor and stores it into the serial * structure. ****************************************************************************/ -static void get_manufacturing_desc (struct edgeport_serial *edge_serial) +static void get_manufacturing_desc(struct edgeport_serial *edge_serial) { int response; dbg("getting manufacturer descriptor"); - response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, - (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN, - (__u8 *)(&edge_serial->manuf_descriptor)); + response = rom_read(edge_serial->serial, + (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), + EDGE_MANUF_DESC_LEN, + (__u8 *)(&edge_serial->manuf_descriptor)); - if (response < 1) { - dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n"); - } else { + if (response < 1) + dev_err(&edge_serial->serial->dev->dev, + "error in getting manufacturer descriptor\n"); + else { char string[30]; dbg("**Manufacturer Descriptor"); - dbg(" RomSize: %dK", edge_serial->manuf_descriptor.RomSize); - dbg(" RamSize: %dK", edge_serial->manuf_descriptor.RamSize); - dbg(" CpuRev: %d", edge_serial->manuf_descriptor.CpuRev); - dbg(" BoardRev: %d", edge_serial->manuf_descriptor.BoardRev); - dbg(" NumPorts: %d", edge_serial->manuf_descriptor.NumPorts); - dbg(" DescDate: %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900); + dbg(" RomSize: %dK", + edge_serial->manuf_descriptor.RomSize); + dbg(" RamSize: %dK", + edge_serial->manuf_descriptor.RamSize); + dbg(" CpuRev: %d", + edge_serial->manuf_descriptor.CpuRev); + dbg(" BoardRev: %d", + edge_serial->manuf_descriptor.BoardRev); + dbg(" NumPorts: %d", + edge_serial->manuf_descriptor.NumPorts); + dbg(" DescDate: %d/%d/%d", + edge_serial->manuf_descriptor.DescDate[0], + edge_serial->manuf_descriptor.DescDate[1], + edge_serial->manuf_descriptor.DescDate[2]+1900); unicode_to_ascii(string, sizeof(string), - edge_serial->manuf_descriptor.SerialNumber, - edge_serial->manuf_descriptor.SerNumLength/2); + edge_serial->manuf_descriptor.SerialNumber, + edge_serial->manuf_descriptor.SerNumLength/2); dbg(" SerialNumber: %s", string); unicode_to_ascii(string, sizeof(string), - edge_serial->manuf_descriptor.AssemblyNumber, - edge_serial->manuf_descriptor.AssemblyNumLength/2); + edge_serial->manuf_descriptor.AssemblyNumber, + edge_serial->manuf_descriptor.AssemblyNumLength/2); dbg(" AssemblyNumber: %s", string); unicode_to_ascii(string, sizeof(string), edge_serial->manuf_descriptor.OemAssyNumber, edge_serial->manuf_descriptor.OemAssyNumLength/2); dbg(" OemAssyNumber: %s", string); - dbg(" UartType: %d", edge_serial->manuf_descriptor.UartType); - dbg(" IonPid: %d", edge_serial->manuf_descriptor.IonPid); - dbg(" IonConfig: %d", edge_serial->manuf_descriptor.IonConfig); + dbg(" UartType: %d", + edge_serial->manuf_descriptor.UartType); + dbg(" IonPid: %d", + edge_serial->manuf_descriptor.IonPid); + dbg(" IonConfig: %d", + edge_serial->manuf_descriptor.IonConfig); } } /**************************************************************************** * get_boot_desc - * reads in the bootloader descriptor and stores it into the serial + * reads in the bootloader descriptor and stores it into the serial * structure. ****************************************************************************/ -static void get_boot_desc (struct edgeport_serial *edge_serial) +static void get_boot_desc(struct edgeport_serial *edge_serial) { int response; dbg("getting boot descriptor"); - response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, - (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN, - (__u8 *)(&edge_serial->boot_descriptor)); + response = rom_read(edge_serial->serial, + (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), + EDGE_BOOT_DESC_LEN, + (__u8 *)(&edge_serial->boot_descriptor)); - if (response < 1) { - dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n"); - } else { + if (response < 1) + dev_err(&edge_serial->serial->dev->dev, + "error in getting boot descriptor\n"); + else { dbg("**Boot Descriptor:"); - dbg(" BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); - dbg(" MajorVersion: %d", edge_serial->boot_descriptor.MajorVersion); - dbg(" MinorVersion: %d", edge_serial->boot_descriptor.MinorVersion); - dbg(" BuildNumber: %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); - dbg(" Capabilities: 0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); - dbg(" UConfig0: %d", edge_serial->boot_descriptor.UConfig0); - dbg(" UConfig1: %d", edge_serial->boot_descriptor.UConfig1); + dbg(" BootCodeLength: %d", + le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); + dbg(" MajorVersion: %d", + edge_serial->boot_descriptor.MajorVersion); + dbg(" MinorVersion: %d", + edge_serial->boot_descriptor.MinorVersion); + dbg(" BuildNumber: %d", + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); + dbg(" Capabilities: 0x%x", + le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); + dbg(" UConfig0: %d", + edge_serial->boot_descriptor.UConfig0); + dbg(" UConfig1: %d", + edge_serial->boot_descriptor.UConfig1); } } @@ -2736,7 +2886,7 @@ static void get_boot_desc (struct edgeport_serial *edge_serial) * load_application_firmware * This is called to load the application firmware to the device ****************************************************************************/ -static void load_application_firmware (struct edgeport_serial *edge_serial) +static void load_application_firmware(struct edgeport_serial *edge_serial) { const struct ihex_binrec *rec; const struct firmware *fw; @@ -2813,7 +2963,7 @@ static void load_application_firmware (struct edgeport_serial *edge_serial) /**************************************************************************** * edge_startup ****************************************************************************/ -static int edge_startup (struct usb_serial *serial) +static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; @@ -2855,10 +3005,10 @@ static int edge_startup (struct usb_serial *serial) sizeof(struct edge_compatibility_bits)); /* get the manufacturing descriptor for this device */ - get_manufacturing_desc (edge_serial); + get_manufacturing_desc(edge_serial); /* get the boot descriptor */ - get_boot_desc (edge_serial); + get_boot_desc(edge_serial); get_product_info(edge_serial); } @@ -2879,41 +3029,43 @@ static int edge_startup (struct usb_serial *serial) /* If not an EPiC device */ if (!edge_serial->is_epic) { /* now load the application firmware into this device */ - load_application_firmware (edge_serial); + load_application_firmware(edge_serial); dbg("%s - time 2 %ld", __func__, jiffies); /* Check current Edgeport EEPROM and update if necessary */ - update_edgeport_E2PROM (edge_serial); + update_edgeport_E2PROM(edge_serial); dbg("%s - time 3 %ld", __func__, jiffies); /* set the configuration to use #1 */ -// dbg("set_configuration 1"); -// usb_set_configuration (dev, 1); +/* dbg("set_configuration 1"); */ +/* usb_set_configuration (dev, 1); */ } dbg(" FirmwareMajorVersion %d.%d.%d", edge_serial->product_info.FirmwareMajorVersion, edge_serial->product_info.FirmwareMinorVersion, le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); - /* we set up the pointers to the endpoints in the edge_open function, + /* we set up the pointers to the endpoints in the edge_open function, * as the structures aren't created yet. */ /* set up our port private structures */ for (i = 0; i < serial->num_ports; ++i) { - edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL); + edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", + __func__); for (j = 0; j < i; ++j) { - kfree (usb_get_serial_port_data(serial->port[j])); - usb_set_serial_port_data(serial->port[j], NULL); + kfree(usb_get_serial_port_data(serial->port[j])); + usb_set_serial_port_data(serial->port[j], + NULL); } usb_set_serial_data(serial, NULL); kfree(edge_serial); return -ENOMEM; } - memset (edge_port, 0, sizeof(struct edgeport_port)); + memset(edge_port, 0, sizeof(struct edgeport_port)); spin_lock_init(&edge_port->ep_lock); edge_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], edge_port); @@ -2922,14 +3074,16 @@ static int edge_startup (struct usb_serial *serial) response = 0; if (edge_serial->is_epic) { - /* EPIC thing, set up our interrupt polling now and our read urb, so - * that the device knows it really is connected. */ + /* EPIC thing, set up our interrupt polling now and our read + * urb, so that the device knows it really is connected. */ interrupt_in_found = bulk_in_found = bulk_out_found = false; - for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) { + for (i = 0; i < serial->interface->altsetting[0] + .desc.bNumEndpoints; ++i) { struct usb_endpoint_descriptor *endpoint; int buffer_size; - endpoint = &serial->interface->altsetting[0].endpoint[i].desc; + endpoint = &serial->interface->altsetting[0]. + endpoint[i].desc; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { @@ -2937,58 +3091,67 @@ static int edge_startup (struct usb_serial *serial) dbg("found interrupt in"); /* not set up yet, so do it now */ - edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); + edge_serial->interrupt_read_urb = + usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->interrupt_read_urb) { err("out of memory"); return -ENOMEM; } - edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + edge_serial->interrupt_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { err("out of memory"); usb_free_urb(edge_serial->interrupt_read_urb); return -ENOMEM; } - edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress; + edge_serial->interrupt_in_endpoint = + endpoint->bEndpointAddress; /* set up our interrupt urb */ - usb_fill_int_urb(edge_serial->interrupt_read_urb, - dev, - usb_rcvintpipe(dev, endpoint->bEndpointAddress), - edge_serial->interrupt_in_buffer, - buffer_size, - edge_interrupt_callback, - edge_serial, - endpoint->bInterval); + usb_fill_int_urb( + edge_serial->interrupt_read_urb, + dev, + usb_rcvintpipe(dev, + endpoint->bEndpointAddress), + edge_serial->interrupt_in_buffer, + buffer_size, + edge_interrupt_callback, + edge_serial, + endpoint->bInterval); interrupt_in_found = true; } if (!bulk_in_found && - (usb_endpoint_is_bulk_in(endpoint))) { + (usb_endpoint_is_bulk_in(endpoint))) { /* we found a bulk in endpoint */ dbg("found bulk in"); /* not set up yet, so do it now */ - edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); + edge_serial->read_urb = + usb_alloc_urb(0, GFP_KERNEL); if (!edge_serial->read_urb) { err("out of memory"); return -ENOMEM; } - edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); + edge_serial->bulk_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->bulk_in_buffer) { - err ("out of memory"); + err("out of memory"); usb_free_urb(edge_serial->read_urb); return -ENOMEM; } - edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress; + edge_serial->bulk_in_endpoint = + endpoint->bEndpointAddress; /* set up our bulk in urb */ usb_fill_bulk_urb(edge_serial->read_urb, dev, - usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), - edge_serial->bulk_in_buffer, - le16_to_cpu(endpoint->wMaxPacketSize), - edge_bulk_in_callback, - edge_serial); + usb_rcvbulkpipe(dev, + endpoint->bEndpointAddress), + edge_serial->bulk_in_buffer, + le16_to_cpu(endpoint->wMaxPacketSize), + edge_bulk_in_callback, + edge_serial); bulk_in_found = true; } @@ -2996,21 +3159,24 @@ static int edge_startup (struct usb_serial *serial) (usb_endpoint_is_bulk_out(endpoint))) { /* we found a bulk out endpoint */ dbg("found bulk out"); - edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress; + edge_serial->bulk_out_endpoint = + endpoint->bEndpointAddress; bulk_out_found = true; } } if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - err ("Error - the proper endpoints were not found!"); + err("Error - the proper endpoints were not found!"); return -ENODEV; } /* start interrupt read for this edgeport this interrupt will * continue as long as the edgeport is connected */ - response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL); + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); if (response) - err("%s - Error %d submitting control urb", __func__, response); + err("%s - Error %d submitting control urb", + __func__, response); } return response; } @@ -3020,7 +3186,7 @@ static int edge_startup (struct usb_serial *serial) * edge_shutdown * This function is called whenever the device is removed from the usb bus. ****************************************************************************/ -static void edge_shutdown (struct usb_serial *serial) +static void edge_shutdown(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); int i; @@ -3028,8 +3194,8 @@ static void edge_shutdown (struct usb_serial *serial) dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { - kfree (usb_get_serial_port_data(serial->port[i])); + for (i = 0; i < serial->num_ports; ++i) { + kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } /* free up our endpoint stuff */ @@ -3069,7 +3235,7 @@ static int __init edgeport_init(void) if (retval) goto failed_epic_device_register; retval = usb_register(&io_driver); - if (retval) + if (retval) goto failed_usb_register; atomic_set(&CmdUrbs, 0); info(DRIVER_DESC " " DRIVER_VERSION); @@ -3094,19 +3260,19 @@ failed_2port_device_register: ****************************************************************************/ static void __exit edgeport_exit (void) { - usb_deregister (&io_driver); - usb_serial_deregister (&edgeport_2port_device); - usb_serial_deregister (&edgeport_4port_device); - usb_serial_deregister (&edgeport_8port_device); - usb_serial_deregister (&epic_device); + usb_deregister(&io_driver); + usb_serial_deregister(&edgeport_2port_device); + usb_serial_deregister(&edgeport_4port_device); + usb_serial_deregister(&edgeport_8port_device); + usb_serial_deregister(&epic_device); } module_init(edgeport_init); module_exit(edgeport_exit); /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("edgeport/boot.fw"); MODULE_FIRMWARE("edgeport/boot2.fw"); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 2ec85893f27..7eb9d67b81b 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * */ #ifndef IO_TABLES_H @@ -90,10 +90,10 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, - { } /* Terminating entry */ + { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_edgeport", diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 61daea3f7b2..cb4c54316cf 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -18,8 +18,8 @@ * * Version history: * - * July 11, 2002 Removed 4 port device structure since all TI UMP - * chips have only 2 ports + * July 11, 2002 Removed 4 port device structure since all TI UMP + * chips have only 2 ports * David Iacovelli (davidi@ionetworks.com) * */ @@ -38,7 +38,7 @@ #include <linux/serial.h> #include <linux/ioctl.h> #include <linux/firmware.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -57,18 +57,19 @@ struct edgeport_uart_buf_desc { - __u32 count; // Number of bytes currently in buffer + __u32 count; /* Number of bytes currently in buffer */ }; /* different hardware types */ #define HARDWARE_TYPE_930 0 #define HARDWARE_TYPE_TIUMP 1 -// IOCTL_PRIVATE_TI_GET_MODE Definitions -#define TI_MODE_CONFIGURING 0 // Device has not entered start device -#define TI_MODE_BOOT 1 // Staying in boot mode -#define TI_MODE_DOWNLOAD 2 // Made it to download mode -#define TI_MODE_TRANSITIONING 3 // Currently in boot mode but transitioning to download mode +/* IOCTL_PRIVATE_TI_GET_MODE Definitions */ +#define TI_MODE_CONFIGURING 0 /* Device has not entered start device */ +#define TI_MODE_BOOT 1 /* Staying in boot mode */ +#define TI_MODE_DOWNLOAD 2 /* Made it to download mode */ +#define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but + transitioning to download mode */ /* read urb state */ #define EDGE_READ_URB_RUNNING 0 @@ -82,10 +83,9 @@ struct edgeport_uart_buf_desc { /* Product information read from the Edgeport */ -struct product_info -{ - int TiMode; // Current TI Mode - __u8 hardware_type; // Type of hardware +struct product_info { + int TiMode; /* Current TI Mode */ + __u8 hardware_type; /* Type of hardware */ } __attribute__((packed)); /* circular buffer */ @@ -116,7 +116,7 @@ struct edgeport_port { happen */ struct edgeport_serial *edge_serial; struct usb_serial_port *port; - __u8 bUartMode; /* Port type, 0: RS232, etc. */ + __u8 bUartMode; /* Port type, 0: RS232, etc. */ spinlock_t ep_lock; int ep_read_urb_state; int ep_write_urb_in_use; @@ -125,8 +125,9 @@ struct edgeport_port { struct edgeport_serial { struct product_info product_info; - u8 TI_I2C_Type; // Type of I2C in UMP - u8 TiReadI2C; // Set to TRUE if we have read the I2c in Boot Mode + u8 TI_I2C_Type; /* Type of I2C in UMP */ + u8 TiReadI2C; /* Set to TRUE if we have read the + I2c in Boot Mode */ struct mutex es_lock; int num_ports_open; struct usb_serial *serial; @@ -214,7 +215,7 @@ static struct usb_device_id id_table_combined [] = { { } }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver io_driver = { .name = "io_ti", @@ -231,20 +232,20 @@ static unsigned short OperationalBuildNumber; static int debug; -static int TIStayInBootMode = 0; static int low_latency = EDGE_LOW_LATENCY; static int closing_wait = EDGE_CLOSING_WAIT; -static int ignore_cpu_rev = 0; -static int default_uart_mode = 0; /* RS232 */ - +static int ignore_cpu_rev; +static int default_uart_mode; /* RS232 */ -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length); +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length); static void stop_read(struct edgeport_port *edge_port); static int restart_read(struct edgeport_port *edge_port); -static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios); -static void edge_send(struct usb_serial_port *port); +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void edge_send(struct tty_struct *tty); /* sysfs attributes */ static int edge_create_sysfs_attrs(struct usb_serial_port *port); @@ -262,87 +263,57 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, unsigned int count); -static int TIReadVendorRequestSync (struct usb_device *dev, - __u8 request, - __u16 value, - __u16 index, - u8 *data, - int size) +static int ti_vread_sync(struct usb_device *dev, __u8 request, + __u16 value, __u16 index, u8 *data, int size) { int status; - status = usb_control_msg (dev, - usb_rcvctrlpipe(dev, 0), - request, - (USB_TYPE_VENDOR | - USB_RECIP_DEVICE | - USB_DIR_IN), - value, - index, - data, - size, - 1000); + status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), + value, index, data, size, 1000); if (status < 0) return status; if (status != size) { - dbg ("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dbg("%s - wanted to write %d, but only wrote %d", + __func__, size, status); return -ECOMM; } return 0; } -static int TISendVendorRequestSync (struct usb_device *dev, - __u8 request, - __u16 value, - __u16 index, - u8 *data, - int size) +static int ti_vsend_sync(struct usb_device *dev, __u8 request, + __u16 value, __u16 index, u8 *data, int size) { int status; - status = usb_control_msg (dev, - usb_sndctrlpipe(dev, 0), - request, - (USB_TYPE_VENDOR | - USB_RECIP_DEVICE | - USB_DIR_OUT), - value, - index, - data, - size, - 1000); + status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), + value, index, data, size, 1000); if (status < 0) return status; if (status != size) { - dbg ("%s - wanted to write %d, but only wrote %d", + dbg("%s - wanted to write %d, but only wrote %d", __func__, size, status); return -ECOMM; } return 0; } -static int TIWriteCommandSync (struct usb_device *dev, __u8 command, +static int send_cmd(struct usb_device *dev, __u8 command, __u8 moduleid, __u16 value, u8 *data, int size) { - return TISendVendorRequestSync (dev, - command, // Request - value, // wValue - moduleid, // wIndex - data, // TransferBuffer - size); // TransferBufferLength - + return ti_vsend_sync(dev, command, value, moduleid, data, size); } /* clear tx/rx buffers and fifo in TI UMP */ -static int TIPurgeDataSync (struct usb_serial_port *port, __u16 mask) +static int purge_port(struct usb_serial_port *port, __u16 mask) { int port_number = port->number - port->serial->minor; - dbg ("%s - port %d, mask %x", __func__, port_number, mask); + dbg("%s - port %d, mask %x", __func__, port_number, mask); - return TIWriteCommandSync (port->serial->dev, + return send_cmd(port->serial->dev, UMPC_PURGE_PORT, (__u8)(UMPM_UART1_PORT + port_number), mask, @@ -351,92 +322,87 @@ static int TIPurgeDataSync (struct usb_serial_port *port, __u16 mask) } /** - * TIReadDownloadMemory - Read edgeport memory from TI chip + * read_download_mem - Read edgeport memory from TI chip * @dev: usb device pointer * @start_address: Device CPU address at which to read * @length: Length of above data * @address_type: Can read both XDATA and I2C * @buffer: pointer to input data buffer */ -static int TIReadDownloadMemory(struct usb_device *dev, int start_address, +static int read_download_mem(struct usb_device *dev, int start_address, int length, __u8 address_type, __u8 *buffer) { int status = 0; __u8 read_length; __be16 be_start_address; - - dbg ("%s - @ %x for %d", __func__, start_address, length); + + dbg("%s - @ %x for %d", __func__, start_address, length); /* Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) */ while (length) { if (length > 64) - read_length= 64; + read_length = 64; else read_length = (__u8)length; if (read_length > 1) { - dbg ("%s - @ %x for %d", __func__, + dbg("%s - @ %x for %d", __func__, start_address, read_length); } - be_start_address = cpu_to_be16 (start_address); - status = TIReadVendorRequestSync (dev, - UMPC_MEMORY_READ, // Request - (__u16)address_type, // wValue (Address type) - (__force __u16)be_start_address, // wIndex (Address to read) - buffer, // TransferBuffer - read_length); // TransferBufferLength + be_start_address = cpu_to_be16(start_address); + status = ti_vread_sync(dev, UMPC_MEMORY_READ, + (__u16)address_type, + (__force __u16)be_start_address, + buffer, read_length); if (status) { - dbg ("%s - ERROR %x", __func__, status); + dbg("%s - ERROR %x", __func__, status); return status; } - if (read_length > 1) { + if (read_length > 1) usb_serial_debug_data(debug, &dev->dev, __func__, read_length, buffer); - } /* Update pointers/length */ start_address += read_length; buffer += read_length; length -= read_length; } - + return status; } -static int TIReadRam (struct usb_device *dev, int start_address, int length, __u8 *buffer) +static int read_ram(struct usb_device *dev, int start_address, + int length, __u8 *buffer) { - return TIReadDownloadMemory (dev, - start_address, - length, - DTK_ADDR_SPACE_XDATA, - buffer); + return read_download_mem(dev, start_address, length, + DTK_ADDR_SPACE_XDATA, buffer); } /* Read edgeport memory to a given block */ -static int TIReadBootMemory (struct edgeport_serial *serial, int start_address, int length, __u8 * buffer) +static int read_boot_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) { int status = 0; int i; - for (i=0; i< length; i++) { - status = TIReadVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_READ, // Request - serial->TI_I2C_Type, // wValue (Address type) - (__u16)(start_address+i), // wIndex - &buffer[i], // TransferBuffer - 0x01); // TransferBufferLength + for (i = 0; i < length; i++) { + status = ti_vread_sync(serial->serial->dev, + UMPC_MEMORY_READ, serial->TI_I2C_Type, + (__u16)(start_address+i), &buffer[i], 0x01); if (status) { - dbg ("%s - ERROR %x", __func__, status); + dbg("%s - ERROR %x", __func__, status); return status; } } - dbg ("%s - start_address = %x, length = %d", __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); + dbg("%s - start_address = %x, length = %d", + __func__, start_address, length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, + __func__, length, buffer); serial->TiReadI2C = 1; @@ -444,7 +410,8 @@ static int TIReadBootMemory (struct edgeport_serial *serial, int start_address, } /* Write given block to TI EPROM memory */ -static int TIWriteBootMemory (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer) +static int write_boot_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) { int status = 0; int i; @@ -452,57 +419,58 @@ static int TIWriteBootMemory (struct edgeport_serial *serial, int start_address, /* Must do a read before write */ if (!serial->TiReadI2C) { - status = TIReadBootMemory(serial, 0, 1, &temp); + status = read_boot_mem(serial, 0, 1, &temp); if (status) return status; } - for (i=0; i < length; ++i) { - status = TISendVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_WRITE, // Request - buffer[i], // wValue - (__u16)(i+start_address), // wIndex - NULL, // TransferBuffer - 0); // TransferBufferLength + for (i = 0; i < length; ++i) { + status = ti_vsend_sync(serial->serial->dev, + UMPC_MEMORY_WRITE, buffer[i], + (__u16)(i + start_address), NULL, 0); if (status) return status; } - dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); + dbg("%s - start_sddr = %x, length = %d", + __func__, start_address, length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, + __func__, length, buffer); return status; } /* Write edgeport I2C memory to TI chip */ -static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer) +static int write_i2c_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 address_type, __u8 *buffer) { int status = 0; int write_length; __be16 be_start_address; /* We can only send a maximum of 1 aligned byte page at a time */ - + /* calulate the number of bytes left in the first page */ - write_length = EPROM_PAGE_SIZE - (start_address & (EPROM_PAGE_SIZE - 1)); + write_length = EPROM_PAGE_SIZE - + (start_address & (EPROM_PAGE_SIZE - 1)); if (write_length > length) write_length = length; - dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer); + dbg("%s - BytesInFirstPage Addr = %x, length = %d", + __func__, start_address, write_length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, + __func__, write_length, buffer); /* Write first page */ - be_start_address = cpu_to_be16 (start_address); - status = TISendVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_WRITE, // Request - (__u16)address_type, // wValue - (__force __u16)be_start_address, // wIndex - buffer, // TransferBuffer - write_length); + be_start_address = cpu_to_be16(start_address); + status = ti_vsend_sync(serial->serial->dev, + UMPC_MEMORY_WRITE, (__u16)address_type, + (__force __u16)be_start_address, + buffer, write_length); if (status) { - dbg ("%s - ERROR %d", __func__, status); + dbg("%s - ERROR %d", __func__, status); return status; } @@ -510,29 +478,31 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address start_address += write_length; buffer += write_length; - /* We should be aligned now -- can write max page size bytes at a time */ + /* We should be aligned now -- can write + max page size bytes at a time */ while (length) { if (length > EPROM_PAGE_SIZE) write_length = EPROM_PAGE_SIZE; else write_length = length; - dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer); + dbg("%s - Page Write Addr = %x, length = %d", + __func__, start_address, write_length); + usb_serial_debug_data(debug, &serial->serial->dev->dev, + __func__, write_length, buffer); /* Write next page */ - be_start_address = cpu_to_be16 (start_address); - status = TISendVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_WRITE, // Request - (__u16)address_type, // wValue - (__force __u16)be_start_address, // wIndex - buffer, // TransferBuffer - write_length); // TransferBufferLength + be_start_address = cpu_to_be16(start_address); + status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE, + (__u16)address_type, + (__force __u16)be_start_address, + buffer, write_length); if (status) { - dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status); + dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n", + __func__, status); return status; } - + length -= write_length; start_address += write_length; buffer += write_length; @@ -541,25 +511,25 @@ static int TIWriteDownloadI2C (struct edgeport_serial *serial, int start_address } /* Examine the UMP DMA registers and LSR - * + * * Check the MSBit of the X and Y DMA byte count registers. * A zero in this bit indicates that the TX DMA buffers are empty * then check the TX Empty bit in the UART. */ -static int TIIsTxActive (struct edgeport_port *port) +static int tx_active(struct edgeport_port *port) { int status; struct out_endpoint_desc_block *oedb; __u8 *lsr; int bytes_left = 0; - oedb = kmalloc (sizeof (* oedb), GFP_KERNEL); + oedb = kmalloc(sizeof(*oedb), GFP_KERNEL); if (!oedb) { - dev_err (&port->port->dev, "%s - out of memory\n", __func__); + dev_err(&port->port->dev, "%s - out of memory\n", __func__); return -ENOMEM; } - lsr = kmalloc (1, GFP_KERNEL); /* Sigh, that's right, just one byte, + lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte, as not all platforms can do DMA from stack */ if (!lsr) { @@ -567,51 +537,47 @@ static int TIIsTxActive (struct edgeport_port *port) return -ENOMEM; } /* Read the DMA Count Registers */ - status = TIReadRam (port->port->serial->dev, - port->dma_address, - sizeof( *oedb), - (void *)oedb); - + status = read_ram(port->port->serial->dev, port->dma_address, + sizeof(*oedb), (void *)oedb); if (status) goto exit_is_tx_active; - dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount); + dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount); /* and the LSR */ - status = TIReadRam (port->port->serial->dev, - port->uart_base + UMPMEM_OFFS_UART_LSR, - 1, - lsr); + status = read_ram(port->port->serial->dev, + port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr); if (status) goto exit_is_tx_active; - dbg ("%s - LSR = 0x%X", __func__, *lsr); - + dbg("%s - LSR = 0x%X", __func__, *lsr); + /* If either buffer has data or we are transmitting then return TRUE */ - if ((oedb->XByteCount & 0x80 ) != 0 ) + if ((oedb->XByteCount & 0x80) != 0) bytes_left += 64; - if ((*lsr & UMP_UART_LSR_TX_MASK ) == 0 ) + if ((*lsr & UMP_UART_LSR_TX_MASK) == 0) bytes_left += 1; /* We return Not Active if we get any kind of error */ exit_is_tx_active: - dbg ("%s - return %d", __func__, bytes_left ); + dbg("%s - return %d", __func__, bytes_left); kfree(lsr); kfree(oedb); return bytes_left; } -static void TIChasePort(struct edgeport_port *port, unsigned long timeout, int flush) +static void chase_port(struct edgeport_port *port, unsigned long timeout, + int flush) { int baud_rate; - struct tty_struct *tty = port->port->tty; + struct tty_struct *tty = port->port->port.tty; wait_queue_t wait; unsigned long flags; if (!timeout) - timeout = (HZ*EDGE_CLOSING_WAIT)/100; + timeout = (HZ * EDGE_CLOSING_WAIT)/100; /* wait for data to drain from the buffer */ spin_lock_irqsave(&port->ep_lock, flags); @@ -621,7 +587,8 @@ static void TIChasePort(struct edgeport_port *port, unsigned long timeout, int f set_current_state(TASK_INTERRUPTIBLE); if (edge_buf_data_avail(port->ep_out_buf) == 0 || timeout == 0 || signal_pending(current) - || !usb_get_intfdata(port->port->serial->interface)) /* disconnect */ + || !usb_get_intfdata(port->port->serial->interface)) + /* disconnect */ break; spin_unlock_irqrestore(&port->ep_lock, flags); timeout = schedule_timeout(timeout); @@ -636,8 +603,9 @@ static void TIChasePort(struct edgeport_port *port, unsigned long timeout, int f /* wait for data to drain from the device */ timeout += jiffies; while ((long)(jiffies - timeout) < 0 && !signal_pending(current) - && usb_get_intfdata(port->port->serial->interface)) { /* not disconnected */ - if (!TIIsTxActive(port)) + && usb_get_intfdata(port->port->serial->interface)) { + /* not disconnected */ + if (!tx_active(port)) break; msleep(10); } @@ -647,72 +615,72 @@ static void TIChasePort(struct edgeport_port *port, unsigned long timeout, int f return; /* wait one more character time, based on baud rate */ - /* (TIIsTxActive doesn't seem to wait for the last byte) */ - if ((baud_rate=port->baud_rate) == 0) + /* (tx_active doesn't seem to wait for the last byte) */ + baud_rate = port->baud_rate; + if (baud_rate == 0) baud_rate = 50; msleep(max(1, DIV_ROUND_UP(10000, baud_rate))); } -static int TIChooseConfiguration (struct usb_device *dev) +static int choose_config(struct usb_device *dev) { - // There may be multiple configurations on this device, in which case - // we would need to read and parse all of them to find out which one - // we want. However, we just support one config at this point, - // configuration # 1, which is Config Descriptor 0. + /* + * There may be multiple configurations on this device, in which case + * we would need to read and parse all of them to find out which one + * we want. However, we just support one config at this point, + * configuration # 1, which is Config Descriptor 0. + */ - dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces); - dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2); + dbg("%s - Number of Interfaces = %d", + __func__, dev->config->desc.bNumInterfaces); + dbg("%s - MAX Power = %d", + __func__, dev->config->desc.bMaxPower * 2); if (dev->config->desc.bNumInterfaces != 1) { - dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); + dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", + __func__); return -ENODEV; } return 0; } -static int TIReadRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer) +static int read_rom(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) { int status; if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { - status = TIReadDownloadMemory (serial->serial->dev, + status = read_download_mem(serial->serial->dev, start_address, length, serial->TI_I2C_Type, buffer); } else { - status = TIReadBootMemory (serial, - start_address, - length, - buffer); + status = read_boot_mem(serial, start_address, length, + buffer); } - return status; } -static int TIWriteRom (struct edgeport_serial *serial, int start_address, int length, __u8 *buffer) +static int write_rom(struct edgeport_serial *serial, int start_address, + int length, __u8 *buffer) { if (serial->product_info.TiMode == TI_MODE_BOOT) - return TIWriteBootMemory (serial, - start_address, - length, - buffer); + return write_boot_mem(serial, start_address, length, + buffer); if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) - return TIWriteDownloadI2C (serial, - start_address, - length, - serial->TI_I2C_Type, - buffer); - + return write_i2c_mem(serial, start_address, length, + serial->TI_I2C_Type, buffer); return -EINVAL; } /* Read a descriptor header from I2C based on type */ -static int TIGetDescriptorAddress (struct edgeport_serial *serial, int desc_type, struct ti_i2c_desc *rom_desc) +static int get_descriptor_addr(struct edgeport_serial *serial, + int desc_type, struct ti_i2c_desc *rom_desc) { int start_address; int status; @@ -720,41 +688,42 @@ static int TIGetDescriptorAddress (struct edgeport_serial *serial, int desc_type /* Search for requested descriptor in I2C */ start_address = 2; do { - status = TIReadRom (serial, + status = read_rom(serial, start_address, sizeof(struct ti_i2c_desc), - (__u8 *)rom_desc ); + (__u8 *)rom_desc); if (status) return 0; if (rom_desc->Type == desc_type) return start_address; - start_address = start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size; + start_address = start_address + sizeof(struct ti_i2c_desc) + + rom_desc->Size; } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type); - + return 0; } /* Validate descriptor checksum */ -static int ValidChecksum(struct ti_i2c_desc *rom_desc, __u8 *buffer) +static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) { __u16 i; __u8 cs = 0; - for (i=0; i < rom_desc->Size; i++) { + for (i = 0; i < rom_desc->Size; i++) cs = (__u8)(cs + buffer[i]); - } + if (cs != rom_desc->CheckSum) { - dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); + dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); return -EINVAL; } return 0; } /* Make sure that the I2C image is good */ -static int TiValidateI2cImage (struct edgeport_serial *serial) +static int check_i2c_image(struct edgeport_serial *serial) { struct device *dev = &serial->serial->dev->dev; int status = 0; @@ -763,120 +732,124 @@ static int TiValidateI2cImage (struct edgeport_serial *serial) __u8 *buffer; __u16 ttype; - rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (dev, "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } - buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL); + buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory when allocating buffer\n", __func__); - kfree (rom_desc); + dev_err(dev, "%s - out of memory when allocating buffer\n", + __func__); + kfree(rom_desc); return -ENOMEM; } - // Read the first byte (Signature0) must be 0x52 or 0x10 - status = TIReadRom (serial, 0, 1, buffer); + /* Read the first byte (Signature0) must be 0x52 or 0x10 */ + status = read_rom(serial, 0, 1, buffer); if (status) - goto ExitTiValidateI2cImage; + goto out; if (*buffer != UMP5152 && *buffer != UMP3410) { - dev_err (dev, "%s - invalid buffer signature\n", __func__); + dev_err(dev, "%s - invalid buffer signature\n", __func__); status = -ENODEV; - goto ExitTiValidateI2cImage; + goto out; } do { - // Validate the I2C - status = TIReadRom (serial, + /* Validate the I2C */ + status = read_rom(serial, start_address, sizeof(struct ti_i2c_desc), (__u8 *)rom_desc); if (status) break; - if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) { + if ((start_address + sizeof(struct ti_i2c_desc) + + rom_desc->Size) > TI_MAX_I2C_SIZE) { status = -ENODEV; - dbg ("%s - structure too big, erroring out.", __func__); + dbg("%s - structure too big, erroring out.", __func__); break; } - dbg ("%s Type = 0x%x", __func__, rom_desc->Type); + dbg("%s Type = 0x%x", __func__, rom_desc->Type); - // Skip type 2 record + /* Skip type 2 record */ ttype = rom_desc->Type & 0x0f; - if ( ttype != I2C_DESC_TYPE_FIRMWARE_BASIC - && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO ) { - // Read the descriptor data - status = TIReadRom(serial, - start_address+sizeof(struct ti_i2c_desc), - rom_desc->Size, - buffer); + if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC + && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) { + /* Read the descriptor data */ + status = read_rom(serial, start_address + + sizeof(struct ti_i2c_desc), + rom_desc->Size, buffer); if (status) break; - status = ValidChecksum(rom_desc, buffer); + status = valid_csum(rom_desc, buffer); if (status) break; } - start_address = start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size; + start_address = start_address + sizeof(struct ti_i2c_desc) + + rom_desc->Size; - } while ((rom_desc->Type != I2C_DESC_TYPE_ION) && (start_address < TI_MAX_I2C_SIZE)); + } while ((rom_desc->Type != I2C_DESC_TYPE_ION) && + (start_address < TI_MAX_I2C_SIZE)); - if ((rom_desc->Type != I2C_DESC_TYPE_ION) || (start_address > TI_MAX_I2C_SIZE)) + if ((rom_desc->Type != I2C_DESC_TYPE_ION) || + (start_address > TI_MAX_I2C_SIZE)) status = -ENODEV; -ExitTiValidateI2cImage: - kfree (buffer); - kfree (rom_desc); +out: + kfree(buffer); + kfree(rom_desc); return status; } -static int TIReadManufDescriptor (struct edgeport_serial *serial, __u8 *buffer) +static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) { int status; int start_address; struct ti_i2c_desc *rom_desc; struct edge_ti_manuf_descriptor *desc; - rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__); + dev_err(&serial->serial->dev->dev, "%s - out of memory\n", + __func__); return -ENOMEM; } - start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc); + start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, + rom_desc); if (!start_address) { - dbg ("%s - Edge Descriptor not found in I2C", __func__); + dbg("%s - Edge Descriptor not found in I2C", __func__); status = -ENODEV; goto exit; } - // Read the descriptor data - status = TIReadRom (serial, - start_address+sizeof(struct ti_i2c_desc), - rom_desc->Size, - buffer); + /* Read the descriptor data */ + status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc), + rom_desc->Size, buffer); if (status) goto exit; - - status = ValidChecksum(rom_desc, buffer); - + + status = valid_csum(rom_desc, buffer); + desc = (struct edge_ti_manuf_descriptor *)buffer; - dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig ); - dbg ( "%s - Version %d", __func__, desc->Version ); - dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev ); - dbg ( "%s - NumPorts %d", __func__, desc->NumPorts ); - dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts ); - dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts ); + dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig); + dbg("%s - Version %d", __func__, desc->Version); + dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev); + dbg("%s - NumPorts %d", __func__, desc->NumPorts); + dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts); + dbg("%s - TotalPorts %d", __func__, desc->TotalPorts); exit: - kfree (rom_desc); + kfree(rom_desc); return status; } /* Build firmware header used for firmware update */ -static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) +static int build_i2c_fw_hdr(__u8 *header, struct device *dev) { __u8 *buffer; int buffer_size; @@ -889,24 +862,28 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) const struct firmware *fw; const char *fw_name = "edgeport/down3.bin"; - // In order to update the I2C firmware we must change the type 2 record to type 0xF2. - // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver - // will download the latest firmware (padded to 15.5k) into the UMP ram. - // And finally when the device comes back up in download mode the driver will cause - // the new firmware to be copied from the UMP Ram to I2C and the firmware will update - // the record type from 0xf2 to 0x02. - - // Allocate a 15.5k buffer + 2 bytes for version number (Firmware Record) - buffer_size = (((1024 * 16) - 512 )+ sizeof(struct ti_i2c_firmware_rec)); - - buffer = kmalloc (buffer_size, GFP_KERNEL); + /* In order to update the I2C firmware we must change the type 2 record + * to type 0xF2. This will force the UMP to come up in Boot Mode. + * Then while in boot mode, the driver will download the latest + * firmware (padded to 15.5k) into the UMP ram. And finally when the + * device comes back up in download mode the driver will cause the new + * firmware to be copied from the UMP Ram to I2C and the firmware will + * update the record type from 0xf2 to 0x02. + */ + + /* Allocate a 15.5k buffer + 2 bytes for version number + * (Firmware Record) */ + buffer_size = (((1024 * 16) - 512 ) + + sizeof(struct ti_i2c_firmware_rec)); + + buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } - + // Set entire image of 0xffs - memset (buffer, 0xff, buffer_size); + memset(buffer, 0xff, buffer_size); err = request_firmware(&fw, fw_name, dev); if (err) { @@ -921,16 +898,16 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) OperationalMinorVersion = fw->data[1]; OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8); - // Copy version number into firmware record + /* Copy version number into firmware record */ firmware_rec = (struct ti_i2c_firmware_rec *)buffer; firmware_rec->Ver_Major = OperationalMajorVersion; firmware_rec->Ver_Minor = OperationalMinorVersion; - // Pointer to fw_down memory image + /* Pointer to fw_down memory image */ img_header = (struct ti_i2c_image_header *)&fw->data[4]; - memcpy (buffer + sizeof(struct ti_i2c_firmware_rec), + memcpy(buffer + sizeof(struct ti_i2c_firmware_rec), &fw->data[4 + sizeof(struct ti_i2c_image_header)], le16_to_cpu(img_header->Length)); @@ -940,12 +917,12 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) cs = (__u8)(cs + buffer[i]); } - kfree (buffer); + kfree(buffer); - // Build new header + /* Build new header */ i2c_header = (struct ti_i2c_desc *)header; firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data; - + i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK; i2c_header->Size = (__u16)buffer_size; i2c_header->CheckSum = cs; @@ -956,103 +933,100 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) } /* Try to figure out what type of I2c we have */ -static int TIGetI2cTypeInBootMode (struct edgeport_serial *serial) +static int i2c_type_bootmode(struct edgeport_serial *serial) { int status; __u8 data; - - // Try to read type 2 - status = TIReadVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_READ, // Request - DTK_ADDR_SPACE_I2C_TYPE_II, // wValue (Address type) - 0, // wIndex - &data, // TransferBuffer - 0x01); // TransferBufferLength + + /* Try to read type 2 */ + status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, + DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01); if (status) - dbg ("%s - read 2 status error = %d", __func__, status); + dbg("%s - read 2 status error = %d", __func__, status); else - dbg ("%s - read 2 data = 0x%x", __func__, data); + dbg("%s - read 2 data = 0x%x", __func__, data); if ((!status) && (data == UMP5152 || data == UMP3410)) { - dbg ("%s - ROM_TYPE_II", __func__); + dbg("%s - ROM_TYPE_II", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; return 0; } - // Try to read type 3 - status = TIReadVendorRequestSync (serial->serial->dev, - UMPC_MEMORY_READ, // Request - DTK_ADDR_SPACE_I2C_TYPE_III, // wValue (Address type) - 0, // wIndex - &data, // TransferBuffer - 0x01); // TransferBufferLength + /* Try to read type 3 */ + status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, + DTK_ADDR_SPACE_I2C_TYPE_III, 0, &data, 0x01); if (status) - dbg ("%s - read 3 status error = %d", __func__, status); + dbg("%s - read 3 status error = %d", __func__, status); else - dbg ("%s - read 2 data = 0x%x", __func__, data); + dbg("%s - read 2 data = 0x%x", __func__, data); if ((!status) && (data == UMP5152 || data == UMP3410)) { - dbg ("%s - ROM_TYPE_III", __func__); + dbg("%s - ROM_TYPE_III", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; return 0; } - dbg ("%s - Unknown", __func__); + dbg("%s - Unknown", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; return -ENODEV; } -static int TISendBulkTransferSync (struct usb_serial *serial, void *buffer, int length, int *num_sent) +static int bulk_xfer(struct usb_serial *serial, void *buffer, + int length, int *num_sent) { int status; - status = usb_bulk_msg (serial->dev, - usb_sndbulkpipe(serial->dev, - serial->port[0]->bulk_out_endpointAddress), - buffer, - length, - num_sent, - 1000); + status = usb_bulk_msg(serial->dev, + usb_sndbulkpipe(serial->dev, + serial->port[0]->bulk_out_endpointAddress), + buffer, length, num_sent, 1000); return status; } /* Download given firmware image to the device (IN BOOT MODE) */ -static int TIDownloadCodeImage (struct edgeport_serial *serial, __u8 *image, int image_length) +static int download_code(struct edgeport_serial *serial, __u8 *image, + int image_length) { int status = 0; int pos; int transfer; int done; - // Transfer firmware image + /* Transfer firmware image */ for (pos = 0; pos < image_length; ) { - // Read the next buffer from file + /* Read the next buffer from file */ transfer = image_length - pos; if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE) transfer = EDGE_FW_BULK_MAX_PACKET_SIZE; - // Transfer data - status = TISendBulkTransferSync (serial->serial, &image[pos], transfer, &done); + /* Transfer data */ + status = bulk_xfer(serial->serial, &image[pos], + transfer, &done); if (status) break; - // Advance buffer pointer + /* Advance buffer pointer */ pos += done; } return status; } -// FIXME!!! -static int TIConfigureBootDevice (struct usb_device *dev) +/* FIXME!!! */ +static int config_boot_dev(struct usb_device *dev) { return 0; } +static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc) +{ + return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev); +} + /** * DownloadTIFirmware - Download run-time operating firmware to the TI5052 - * + * * This routine downloads the main operating code into the TI5052, using the * boot code already burned into E2PROM or ROM. */ -static int TIDownloadFirmware (struct edgeport_serial *serial) +static int download_fw(struct edgeport_serial *serial) { struct device *dev = &serial->serial->dev->dev; int status = 0; @@ -1071,22 +1045,25 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) /* Default to type 2 i2c */ serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - status = TIChooseConfiguration (serial->serial->dev); + status = choose_config(serial->serial->dev); if (status) return status; interface = &serial->serial->interface->cur_altsetting->desc; if (!interface) { - dev_err (dev, "%s - no interface set, error!\n", __func__); + dev_err(dev, "%s - no interface set, error!\n", __func__); return -ENODEV; } - // Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING - // if we have more than one endpoint we are definitely in download mode + /* + * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING + * if we have more than one endpoint we are definitely in download + * mode + */ if (interface->bNumEndpoints > 1) serial->product_info.TiMode = TI_MODE_DOWNLOAD; else - // Otherwise we will remain in configuring mode + /* Otherwise we will remain in configuring mode */ serial->product_info.TiMode = TI_MODE_CONFIGURING; /********************************************************************/ @@ -1097,256 +1074,273 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) dbg("%s - RUNNING IN DOWNLOAD MODE", __func__); - status = TiValidateI2cImage (serial); + status = check_i2c_image(serial); if (status) { dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__); return status; } - + /* Validate Hardware version number * Read Manufacturing Descriptor from TI Based Edgeport */ - ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL); + ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); if (!ti_manuf_desc) { - dev_err (dev, "%s - out of memory.\n", __func__); + dev_err(dev, "%s - out of memory.\n", __func__); return -ENOMEM; } - status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc); + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); if (status) { - kfree (ti_manuf_desc); + kfree(ti_manuf_desc); return status; } - // Check version number of ION descriptor - if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) { - dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__, - TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev)); - kfree (ti_manuf_desc); - return -EINVAL; - } + /* Check version number of ION descriptor */ + if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { + dbg("%s - Wrong CPU Rev %d (Must be 2)", + __func__, ti_cpu_rev(ti_manuf_desc)); + kfree(ti_manuf_desc); + return -EINVAL; + } - rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL); + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err (dev, "%s - out of memory.\n", __func__); - kfree (ti_manuf_desc); + dev_err(dev, "%s - out of memory.\n", __func__); + kfree(ti_manuf_desc); return -ENOMEM; } - // Search for type 2 record (firmware record) - if ((start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc)) != 0) { + /* Search for type 2 record (firmware record) */ + start_address = get_descriptor_addr(serial, + I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); + if (start_address != 0) { struct ti_i2c_firmware_rec *firmware_version; __u8 record; - dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__); + dbg("%s - Found Type FIRMWARE (Type 2) record", + __func__); - firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL); + firmware_version = kmalloc(sizeof(*firmware_version), + GFP_KERNEL); if (!firmware_version) { - dev_err (dev, "%s - out of memory.\n", __func__); - kfree (rom_desc); - kfree (ti_manuf_desc); + dev_err(dev, "%s - out of memory.\n", __func__); + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENOMEM; } - // Validate version number - // Read the descriptor data - status = TIReadRom (serial, - start_address+sizeof(struct ti_i2c_desc), + /* Validate version number + * Read the descriptor data + */ + status = read_rom(serial, start_address + + sizeof(struct ti_i2c_desc), sizeof(struct ti_i2c_firmware_rec), (__u8 *)firmware_version); if (status) { - kfree (firmware_version); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } - // Check version number of download with current version in I2c - download_cur_ver = (firmware_version->Ver_Major << 8) + + /* Check version number of download with current + version in I2c */ + download_cur_ver = (firmware_version->Ver_Major << 8) + (firmware_version->Ver_Minor); download_new_ver = (OperationalMajorVersion << 8) + (OperationalMinorVersion); - dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dbg("%s - >> FW Versions Device %d.%d Driver %d.%d", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); - // Check if we have an old version in the I2C and update if necessary + /* Check if we have an old version in the I2C and + update if necessary */ if (download_cur_ver != download_new_ver) { - dbg ("%s - Update I2C Download from %d.%d to %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); - - // In order to update the I2C firmware we must change the type 2 record to type 0xF2. - // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver - // will download the latest firmware (padded to 15.5k) into the UMP ram. - // And finally when the device comes back up in download mode the driver will cause - // the new firmware to be copied from the UMP Ram to I2C and the firmware will update - // the record type from 0xf2 to 0x02. - + dbg("%s - Update I2C dld from %d.%d to %d.%d", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); + + /* In order to update the I2C firmware we must + * change the type 2 record to type 0xF2. This + * will force the UMP to come up in Boot Mode. + * Then while in boot mode, the driver will + * download the latest firmware (padded to + * 15.5k) into the UMP ram. Finally when the + * device comes back up in download mode the + * driver will cause the new firmware to be + * copied from the UMP Ram to I2C and the + * firmware will update the record type from + * 0xf2 to 0x02. + */ record = I2C_DESC_TYPE_FIRMWARE_BLANK; - // Change the I2C Firmware record type to 0xf2 to trigger an update - status = TIWriteRom (serial, - start_address, - sizeof(record), - &record); + /* Change the I2C Firmware record type to + 0xf2 to trigger an update */ + status = write_rom(serial, start_address, + sizeof(record), &record); if (status) { - kfree (firmware_version); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } - // verify the write -- must do this in order for write to - // complete before we do the hardware reset - status = TIReadRom (serial, + /* verify the write -- must do this in order + * for write to complete before we do the + * hardware reset + */ + status = read_rom(serial, start_address, sizeof(record), &record); - if (status) { - kfree (firmware_version); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err (dev, "%s - error resetting device\n", __func__); - kfree (firmware_version); - kfree (rom_desc); - kfree (ti_manuf_desc); + dev_err(dev, + "%s - error resetting device\n", + __func__); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENODEV; } - dbg ("%s - HARDWARE RESET", __func__); + dbg("%s - HARDWARE RESET", __func__); - // Reset UMP -- Back to BOOT MODE - status = TISendVendorRequestSync (serial->serial->dev, - UMPC_HARDWARE_RESET, // Request - 0, // wValue - 0, // wIndex - NULL, // TransferBuffer - 0); // TransferBufferLength + /* Reset UMP -- Back to BOOT MODE */ + status = ti_vsend_sync(serial->serial->dev, + UMPC_HARDWARE_RESET, + 0, 0, NULL, 0); - dbg ( "%s - HARDWARE RESET return %d", __func__, status); + dbg("%s - HARDWARE RESET return %d", + __func__, status); /* return an error on purpose. */ - kfree (firmware_version); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENODEV; } - kfree (firmware_version); + kfree(firmware_version); } - // Search for type 0xF2 record (firmware blank record) - else if ((start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) { - #define HEADER_SIZE (sizeof(struct ti_i2c_desc) + sizeof(struct ti_i2c_firmware_rec)) + /* Search for type 0xF2 record (firmware blank record) */ + else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) { +#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \ + sizeof(struct ti_i2c_firmware_rec)) __u8 *header; __u8 *vheader; - header = kmalloc (HEADER_SIZE, GFP_KERNEL); + header = kmalloc(HEADER_SIZE, GFP_KERNEL); if (!header) { - dev_err (dev, "%s - out of memory.\n", __func__); - kfree (rom_desc); - kfree (ti_manuf_desc); + dev_err(dev, "%s - out of memory.\n", __func__); + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENOMEM; } - - vheader = kmalloc (HEADER_SIZE, GFP_KERNEL); + + vheader = kmalloc(HEADER_SIZE, GFP_KERNEL); if (!vheader) { - dev_err (dev, "%s - out of memory.\n", __func__); - kfree (header); - kfree (rom_desc); - kfree (ti_manuf_desc); + dev_err(dev, "%s - out of memory.\n", __func__); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENOMEM; } - - dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__); - - // In order to update the I2C firmware we must change the type 2 record to type 0xF2. - // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver - // will download the latest firmware (padded to 15.5k) into the UMP ram. - // And finally when the device comes back up in download mode the driver will cause - // the new firmware to be copied from the UMP Ram to I2C and the firmware will update - // the record type from 0xf2 to 0x02. - status = BuildI2CFirmwareHeader(header, dev); + + dbg("%s - Found Type BLANK FIRMWARE (Type F2) record", + __func__); + + /* + * In order to update the I2C firmware we must change + * the type 2 record to type 0xF2. This will force the + * UMP to come up in Boot Mode. Then while in boot + * mode, the driver will download the latest firmware + * (padded to 15.5k) into the UMP ram. Finally when the + * device comes back up in download mode the driver + * will cause the new firmware to be copied from the + * UMP Ram to I2C and the firmware will update the + * record type from 0xf2 to 0x02. + */ + status = build_i2c_fw_hdr(header, dev); if (status) { - kfree (vheader); - kfree (header); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } - // Update I2C with type 0xf2 record with correct size and checksum - status = TIWriteRom (serial, + /* Update I2C with type 0xf2 record with correct + size and checksum */ + status = write_rom(serial, start_address, HEADER_SIZE, header); if (status) { - kfree (vheader); - kfree (header); - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } - // verify the write -- must do this in order for write to - // complete before we do the hardware reset - status = TIReadRom (serial, - start_address, - HEADER_SIZE, - vheader); + /* verify the write -- must do this in order for + write to complete before we do the hardware reset */ + status = read_rom(serial, start_address, + HEADER_SIZE, vheader); if (status) { - dbg ("%s - can't read header back", __func__); - kfree (vheader); - kfree (header); - kfree (rom_desc); - kfree (ti_manuf_desc); + dbg("%s - can't read header back", __func__); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dbg ("%s - write download record failed", __func__); - kfree (vheader); - kfree (header); - kfree (rom_desc); - kfree (ti_manuf_desc); + dbg("%s - write download record failed", + __func__); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } - kfree (vheader); - kfree (header); + kfree(vheader); + kfree(header); - dbg ("%s - Start firmware update", __func__); + dbg("%s - Start firmware update", __func__); - // Tell firmware to copy download image into I2C - status = TISendVendorRequestSync (serial->serial->dev, - UMPC_COPY_DNLD_TO_I2C, // Request - 0, // wValue - 0, // wIndex - NULL, // TransferBuffer - 0); // TransferBufferLength + /* Tell firmware to copy download image into I2C */ + status = ti_vsend_sync(serial->serial->dev, + UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0); - dbg ("%s - Update complete 0x%x", __func__, status); + dbg("%s - Update complete 0x%x", __func__, status); if (status) { - dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__); - kfree (rom_desc); - kfree (ti_manuf_desc); + dev_err(dev, + "%s - UMPC_COPY_DNLD_TO_I2C failed\n", + __func__); + kfree(rom_desc); + kfree(ti_manuf_desc); return status; } } // The device is running the download code - kfree (rom_desc); - kfree (ti_manuf_desc); + kfree(rom_desc); + kfree(ti_manuf_desc); return 0; } @@ -1355,32 +1349,26 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) /********************************************************************/ dbg("%s - RUNNING IN BOOT MODE", __func__); - // Configure the TI device so we can use the BULK pipes for download - status = TIConfigureBootDevice (serial->serial->dev); + /* Configure the TI device so we can use the BULK pipes for download */ + status = config_boot_dev(serial->serial->dev); if (status) return status; - if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) { - dbg ("%s - VID = 0x%x", __func__, + if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) + != USB_VENDOR_ID_ION) { + dbg("%s - VID = 0x%x", __func__, le16_to_cpu(serial->serial->dev->descriptor.idVendor)); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; - goto StayInBootMode; + goto stayinbootmode; } - // We have an ION device (I2c Must be programmed) - // Determine I2C image type - if (TIGetI2cTypeInBootMode(serial)) { - goto StayInBootMode; - } + /* We have an ION device (I2c Must be programmed) + Determine I2C image type */ + if (i2c_type_bootmode(serial)) + goto stayinbootmode; - // Registry variable set? - if (TIStayInBootMode) { - dbg ("%s - TIStayInBootMode", __func__); - goto StayInBootMode; - } - - // Check for ION Vendor ID and that the I2C is valid - if (!TiValidateI2cImage(serial)) { + /* Check for ION Vendor ID and that the I2C is valid */ + if (!check_i2c_image(serial)) { struct ti_i2c_image_header *header; int i; __u8 cs = 0; @@ -1393,49 +1381,52 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) /* Validate Hardware version number * Read Manufacturing Descriptor from TI Based Edgeport */ - ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL); + ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); if (!ti_manuf_desc) { - dev_err (dev, "%s - out of memory.\n", __func__); + dev_err(dev, "%s - out of memory.\n", __func__); return -ENOMEM; } - status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc); + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); if (status) { - kfree (ti_manuf_desc); - goto StayInBootMode; + kfree(ti_manuf_desc); + goto stayinbootmode; } - // Check for version 2 - if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) { - dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__, - TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev)); - kfree (ti_manuf_desc); - goto StayInBootMode; + /* Check for version 2 */ + if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { + dbg("%s - Wrong CPU Rev %d (Must be 2)", + __func__, ti_cpu_rev(ti_manuf_desc)); + kfree(ti_manuf_desc); + goto stayinbootmode; } - kfree (ti_manuf_desc); + kfree(ti_manuf_desc); - // In order to update the I2C firmware we must change the type 2 record to type 0xF2. - // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver - // will download the latest firmware (padded to 15.5k) into the UMP ram. - // And finally when the device comes back up in download mode the driver will cause - // the new firmware to be copied from the UMP Ram to I2C and the firmware will update - // the record type from 0xf2 to 0x02. - /* + * In order to update the I2C firmware we must change the type + * 2 record to type 0xF2. This will force the UMP to come up + * in Boot Mode. Then while in boot mode, the driver will + * download the latest firmware (padded to 15.5k) into the + * UMP ram. Finally when the device comes back up in download + * mode the driver will cause the new firmware to be copied + * from the UMP Ram to I2C and the firmware will update the + * record type from 0xf2 to 0x02. + * * Do we really have to copy the whole firmware image, * or could we do this in place! */ - // Allocate a 15.5k buffer + 3 byte header - buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header)); - buffer = kmalloc (buffer_size, GFP_KERNEL); + /* Allocate a 15.5k buffer + 3 byte header */ + buffer_size = (((1024 * 16) - 512) + + sizeof(struct ti_i2c_image_header)); + buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (dev, "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } - - // Initialize the buffer to 0xff (pad the buffer) - memset (buffer, 0xff, buffer_size); + + /* Initialize the buffer to 0xff (pad the buffer) */ + memset(buffer, 0xff, buffer_size); err = request_firmware(&fw, fw_name, dev); if (err) { @@ -1447,38 +1438,43 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) memcpy(buffer, &fw->data[4], fw->size - 4); release_firmware(fw); - for(i = sizeof(struct ti_i2c_image_header); i < buffer_size; i++) { + for (i = sizeof(struct ti_i2c_image_header); + i < buffer_size; i++) { cs = (__u8)(cs + buffer[i]); } - + header = (struct ti_i2c_image_header *)buffer; - - // update length and checksum after padding - header->Length = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_i2c_image_header))); + + /* update length and checksum after padding */ + header->Length = cpu_to_le16((__u16)(buffer_size - + sizeof(struct ti_i2c_image_header))); header->CheckSum = cs; - // Download the operational code - dbg ("%s - Downloading operational code image (TI UMP)", __func__); - status = TIDownloadCodeImage (serial, buffer, buffer_size); + /* Download the operational code */ + dbg("%s - Downloading operational code image (TI UMP)", + __func__); + status = download_code(serial, buffer, buffer_size); - kfree (buffer); + kfree(buffer); if (status) { - dbg ("%s - Error downloading operational code image", __func__); + dbg("%s - Error downloading operational code image", + __func__); return status; } - // Device will reboot + /* Device will reboot */ serial->product_info.TiMode = TI_MODE_TRANSITIONING; - dbg ("%s - Download successful -- Device rebooting...", __func__); + dbg("%s - Download successful -- Device rebooting...", + __func__); /* return an error on purpose */ return -ENODEV; } -StayInBootMode: - // Eprom is invalid or blank stay in boot mode +stayinbootmode: + /* Eprom is invalid or blank stay in boot mode */ dbg("%s - STAYING IN BOOT MODE", __func__); serial->product_info.TiMode = TI_MODE_BOOT; @@ -1486,156 +1482,33 @@ StayInBootMode: } -static int TISetDtr (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - port->shadow_mcr |= MCR_DTR; - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_DTR, - (__u8)(UMPM_UART1_PORT + port_number), - 1, /* set */ - NULL, - 0); -} - -static int TIClearDtr (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - port->shadow_mcr &= ~MCR_DTR; - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_DTR, - (__u8)(UMPM_UART1_PORT + port_number), - 0, /* clear */ - NULL, - 0); -} - -static int TISetRts (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - port->shadow_mcr |= MCR_RTS; - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_RTS, - (__u8)(UMPM_UART1_PORT + port_number), - 1, /* set */ - NULL, - 0); -} - -static int TIClearRts (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - port->shadow_mcr &= ~MCR_RTS; - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_RTS, - (__u8)(UMPM_UART1_PORT + port_number), - 0, /* clear */ - NULL, - 0); -} - -static int TISetLoopBack (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_LOOPBACK, - (__u8)(UMPM_UART1_PORT + port_number), - 1, /* set */ - NULL, - 0); -} - -static int TIClearLoopBack (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_LOOPBACK, - (__u8)(UMPM_UART1_PORT + port_number), - 0, /* clear */ - NULL, - 0); -} - -static int TISetBreak (struct edgeport_port *port) +static int ti_do_config(struct edgeport_port *port, int feature, int on) { int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_BREAK, - (__u8)(UMPM_UART1_PORT + port_number), - 1, /* set */ - NULL, - 0); + on = !!on; /* 1 or 0 not bitmask */ + return send_cmd(port->port->serial->dev, + feature, (__u8)(UMPM_UART1_PORT + port_number), + on, NULL, 0); } -static int TIClearBreak (struct edgeport_port *port) -{ - int port_number = port->port->number - port->port->serial->minor; - - dbg ("%s", __func__); - return TIWriteCommandSync (port->port->serial->dev, - UMPC_SET_CLR_BREAK, - (__u8)(UMPM_UART1_PORT + port_number), - 0, /* clear */ - NULL, - 0); -} - -static int TIRestoreMCR (struct edgeport_port *port, __u8 mcr) +static int restore_mcr(struct edgeport_port *port, __u8 mcr) { int status = 0; - dbg ("%s - %x", __func__, mcr); - - if (mcr & MCR_DTR) - status = TISetDtr (port); - else - status = TIClearDtr (port); + dbg("%s - %x", __func__, mcr); + status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR); if (status) return status; - - if (mcr & MCR_RTS) - status = TISetRts (port); - else - status = TIClearRts (port); - + status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS); if (status) return status; - - if (mcr & MCR_LOOPBACK) - status = TISetLoopBack (port); - else - status = TIClearLoopBack (port); - - return status; + return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK); } - - /* Convert TI LSR to standard UART flags */ -static __u8 MapLineStatus (__u8 ti_lsr) +static __u8 map_line_status(__u8 ti_lsr) { __u8 lsr = 0; @@ -1647,22 +1520,23 @@ static __u8 MapLineStatus (__u8 ti_lsr) MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */ MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */ MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */ - MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* receive data available */ - MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* transmit holding register empty */ + MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */ + MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */ #undef MAP_FLAG return lsr; } -static void handle_new_msr (struct edgeport_port *edge_port, __u8 msr) +static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) { struct async_icount *icount; struct tty_struct *tty; - dbg ("%s - %02x", __func__, msr); + dbg("%s - %02x", __func__, msr); - if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { + if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | + EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { icount = &edge_port->icount; /* update input line counters */ @@ -1674,13 +1548,13 @@ static void handle_new_msr (struct edgeport_port *edge_port, __u8 msr) icount->dcd++; if (msr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible (&edge_port->delta_msr_wait); + wake_up_interruptible(&edge_port->delta_msr_wait); } /* Save the new modem status */ edge_port->shadow_msr = msr & 0xf0; - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; /* handle CTS flow control */ if (tty && C_CRTSCTS(tty)) { if (msr & EDGEPORT_MSR_CTS) { @@ -1694,26 +1568,27 @@ static void handle_new_msr (struct edgeport_port *edge_port, __u8 msr) return; } -static void handle_new_lsr (struct edgeport_port *edge_port, int lsr_data, __u8 lsr, __u8 data) +static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, + __u8 lsr, __u8 data) { struct async_icount *icount; - __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); + __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | + LSR_FRM_ERR | LSR_BREAK)); - dbg ("%s - %02x", __func__, new_lsr); + dbg("%s - %02x", __func__, new_lsr); edge_port->shadow_lsr = lsr; - if (new_lsr & LSR_BREAK) { + if (new_lsr & LSR_BREAK) /* * Parity and Framing errors only count if they * occur exclusive of a break being received. */ new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); - } /* Place LSR data byte into Rx buffer */ - if (lsr_data && edge_port->port->tty) - edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1); + if (lsr_data && edge_port->port->port.tty) + edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1); /* update input line counters */ icount = &edge_port->icount; @@ -1728,7 +1603,7 @@ static void handle_new_lsr (struct edgeport_port *edge_port, int lsr_data, __u8 } -static void edge_interrupt_callback (struct urb *urb) +static void edge_interrupt_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; struct usb_serial_port *port; @@ -1762,66 +1637,71 @@ static void edge_interrupt_callback (struct urb *urb) } if (!length) { - dbg ("%s - no data in urb", __func__); + dbg("%s - no data in urb", __func__); goto exit; } - - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data); - + + usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, + __func__, length, data); + if (length != 2) { - dbg ("%s - expecting packet of size 2, got %d", __func__, length); + dbg("%s - expecting packet of size 2, got %d", + __func__, length); goto exit; } - port_number = TIUMP_GET_PORT_FROM_CODE (data[0]); - function = TIUMP_GET_FUNC_FROM_CODE (data[0]); - dbg ("%s - port_number %d, function %d, info 0x%x", + port_number = TIUMP_GET_PORT_FROM_CODE(data[0]); + function = TIUMP_GET_FUNC_FROM_CODE(data[0]); + dbg("%s - port_number %d, function %d, info 0x%x", __func__, port_number, function, data[1]); port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { - dbg ("%s - edge_port not found", __func__); + dbg("%s - edge_port not found", __func__); return; } switch (function) { case TIUMP_INTERRUPT_CODE_LSR: - lsr = MapLineStatus(data[1]); + lsr = map_line_status(data[1]); if (lsr & UMP_UART_LSR_DATA_MASK) { - /* Save the LSR event for bulk read completion routine */ - dbg ("%s - LSR Event Port %u LSR Status = %02x", + /* Save the LSR event for bulk read + completion routine */ + dbg("%s - LSR Event Port %u LSR Status = %02x", __func__, port_number, lsr); edge_port->lsr_event = 1; edge_port->lsr_mask = lsr; } else { - dbg ("%s - ===== Port %d LSR Status = %02x ======", + dbg("%s - ===== Port %d LSR Status = %02x ======", __func__, port_number, lsr); - handle_new_lsr (edge_port, 0, lsr, 0); + handle_new_lsr(edge_port, 0, lsr, 0); } break; - case TIUMP_INTERRUPT_CODE_MSR: // MSR + case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg ("%s - ===== Port %u MSR Status = %02x ======\n", + dbg("%s - ===== Port %u MSR Status = %02x ======\n", __func__, port_number, msr); - handle_new_msr (edge_port, msr); + handle_new_msr(edge_port, msr); break; default: - dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n", - __func__, data[1]); + dev_err(&urb->dev->dev, + "%s - Unknown Interrupt code from UMP %x\n", + __func__, data[1]); break; - + } exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -static void edge_bulk_in_callback (struct urb *urb) +static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; unsigned char *data = urb->transfer_buffer; @@ -1844,15 +1724,16 @@ static void edge_bulk_in_callback (struct urb *urb) __func__, status); return; default: - dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n", - __func__, status); + dev_err(&urb->dev->dev, + "%s - nonzero read bulk status received: %d\n", + __func__, status); } if (status == -EPIPE) goto exit; if (status) { - dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__); + dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__); return; } @@ -1860,23 +1741,24 @@ static void edge_bulk_in_callback (struct urb *urb) if (edge_port->lsr_event) { edge_port->lsr_event = 0; - dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======", + dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======", __func__, port_number, edge_port->lsr_mask, *data); - handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data); + handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data); /* Adjust buffer length/pointer */ --urb->actual_length; ++data; } - tty = edge_port->port->tty; + tty = edge_port->port->port.tty; if (tty && urb->actual_length) { - usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data); - - if (edge_port->close_pending) { - dbg ("%s - close is pending, dropping data on the floor.", __func__); - } else { - edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length); - } + usb_serial_debug_data(debug, &edge_port->port->dev, + __func__, urb->actual_length, data); + if (edge_port->close_pending) + dbg("%s - close pending, dropping data on the floor", + __func__); + else + edge_tty_recv(&edge_port->port->dev, tty, data, + urb->actual_length); edge_port->icount.rx += urb->actual_length; } @@ -1891,37 +1773,31 @@ exit: } spin_unlock(&edge_port->ep_lock); if (retval) - dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", __func__, retval); } -static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length) +static void edge_tty_recv(struct device *dev, struct tty_struct *tty, + unsigned char *data, int length) { - int cnt; - - do { - cnt = tty_buffer_request_room(tty, length); - if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", - __func__, length - cnt); - if(cnt == 0) - break; - } - tty_insert_flip_string(tty, data, cnt); - data += cnt; - length -= cnt; - } while (length > 0); + int queued; + tty_buffer_request_room(tty, length); + queued = tty_insert_flip_string(tty, data, length); + if (queued < length) + dev_err(dev, "%s - dropping data, %d bytes lost\n", + __func__, length - queued); tty_flip_buffer_push(tty); } -static void edge_bulk_out_callback (struct urb *urb) +static void edge_bulk_out_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status = urb->status; - dbg ("%s - port %d", __func__, port->number); + dbg("%s - port %d", __func__, port->number); edge_port->ep_write_urb_in_use = 0; @@ -1942,10 +1818,11 @@ static void edge_bulk_out_callback (struct urb *urb) } /* send any buffered data */ - edge_send(port); + edge_send(port->port.tty); } -static int edge_open (struct usb_serial_port *port, struct file * filp) +static int edge_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct edgeport_serial *edge_serial; @@ -1961,122 +1838,125 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) if (edge_port == NULL) return -ENODEV; - port->tty->low_latency = low_latency; + if (tty) + tty->low_latency = low_latency; port_number = port->number - port->serial->minor; switch (port_number) { - case 0: - edge_port->uart_base = UMPMEM_BASE_UART1; - edge_port->dma_address = UMPD_OEDB1_ADDRESS; - break; - case 1: - edge_port->uart_base = UMPMEM_BASE_UART2; - edge_port->dma_address = UMPD_OEDB2_ADDRESS; - break; - default: - dev_err (&port->dev, "Unknown port number!!!\n"); - return -ENODEV; + case 0: + edge_port->uart_base = UMPMEM_BASE_UART1; + edge_port->dma_address = UMPD_OEDB1_ADDRESS; + break; + case 1: + edge_port->uart_base = UMPMEM_BASE_UART2; + edge_port->dma_address = UMPD_OEDB2_ADDRESS; + break; + default: + dev_err(&port->dev, "Unknown port number!!!\n"); + return -ENODEV; } - dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x", - __func__, port_number, edge_port->uart_base, edge_port->dma_address); + dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x", + __func__, port_number, edge_port->uart_base, + edge_port->dma_address); dev = port->serial->dev; - memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - init_waitqueue_head (&edge_port->delta_msr_wait); + memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); + init_waitqueue_head(&edge_port->delta_msr_wait); /* turn off loopback */ - status = TIClearLoopBack (edge_port); + status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0); if (status) { - dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n", + dev_err(&port->dev, + "%s - cannot send clear loopback command, %d\n", __func__, status); return status; } - + /* set up the port settings */ - edge_set_termios (port, port->tty->termios); + if (tty) + edge_set_termios(tty, port, port->port.tty->termios); /* open up the port */ /* milliseconds to timeout for DMA transfer */ transaction_timeout = 2; - edge_port->ump_read_timeout = max (20, ((transaction_timeout * 3) / 2) ); + edge_port->ump_read_timeout = + max(20, ((transaction_timeout * 3) / 2)); - // milliseconds to timeout for DMA transfer - open_settings = (u8)(UMP_DMA_MODE_CONTINOUS | - UMP_PIPE_TRANS_TIMEOUT_ENA | + /* milliseconds to timeout for DMA transfer */ + open_settings = (u8)(UMP_DMA_MODE_CONTINOUS | + UMP_PIPE_TRANS_TIMEOUT_ENA | (transaction_timeout << 2)); - dbg ("%s - Sending UMPC_OPEN_PORT", __func__); + dbg("%s - Sending UMPC_OPEN_PORT", __func__); /* Tell TI to open and start the port */ - status = TIWriteCommandSync (dev, - UMPC_OPEN_PORT, - (u8)(UMPM_UART1_PORT + port_number), - open_settings, - NULL, - 0); + status = send_cmd(dev, UMPC_OPEN_PORT, + (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { - dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send open command, %d\n", + __func__, status); return status; } /* Start the DMA? */ - status = TIWriteCommandSync (dev, - UMPC_START_PORT, - (u8)(UMPM_UART1_PORT + port_number), - 0, - NULL, - 0); + status = send_cmd(dev, UMPC_START_PORT, + (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); if (status) { - dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send start DMA command, %d\n", + __func__, status); return status; } /* Clear TX and RX buffers in UMP */ - status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN); + status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN); if (status) { - dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status); + dev_err(&port->dev, + "%s - cannot send clear buffers command, %d\n", + __func__, status); return status; } /* Read Initial MSR */ - status = TIReadVendorRequestSync (dev, - UMPC_READ_MSR, // Request - 0, // wValue - (__u16)(UMPM_UART1_PORT + port_number), // wIndex (Address) - &edge_port->shadow_msr, // TransferBuffer - 1); // TransferBufferLength + status = ti_vread_sync(dev, UMPC_READ_MSR, 0, + (__u16)(UMPM_UART1_PORT + port_number), + &edge_port->shadow_msr, 1); if (status) { - dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send read MSR command, %d\n", + __func__, status); return status; } - dbg ("ShadowMSR 0x%X", edge_port->shadow_msr); - + dbg("ShadowMSR 0x%X", edge_port->shadow_msr); + /* Set Initial MCR */ edge_port->shadow_mcr = MCR_RTS | MCR_DTR; - dbg ("ShadowMCR 0x%X", edge_port->shadow_mcr); + dbg("ShadowMCR 0x%X", edge_port->shadow_mcr); edge_serial = edge_port->edge_serial; if (mutex_lock_interruptible(&edge_serial->es_lock)) return -ERESTARTSYS; if (edge_serial->num_ports_open == 0) { - /* we are the first port to be opened, let's post the interrupt urb */ + /* we are the first port to open, post the interrupt urb */ urb = edge_serial->serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__); + dev_err(&port->dev, + "%s - no interrupt urb present, exiting\n", + __func__); status = -EINVAL; goto release_es_lock; } urb->complete = edge_interrupt_callback; urb->context = edge_serial; urb->dev = dev; - status = usb_submit_urb (urb, GFP_KERNEL); + status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status); + dev_err(&port->dev, + "%s - usb_submit_urb failed with value %d\n", + __func__, status); goto release_es_lock; } } @@ -2085,13 +1965,14 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) * reset the data toggle on the bulk endpoints to work around bug in * host controllers where things get out of sync some times */ - usb_clear_halt (dev, port->write_urb->pipe); - usb_clear_halt (dev, port->read_urb->pipe); + usb_clear_halt(dev, port->write_urb->pipe); + usb_clear_halt(dev, port->read_urb->pipe); /* start up our bulk read urb */ urb = port->read_urb; if (!urb) { - dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__); + dev_err(&port->dev, "%s - no read urb present, exiting\n", + __func__); status = -EINVAL; goto unlink_int_urb; } @@ -2099,9 +1980,11 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) urb->complete = edge_bulk_in_callback; urb->context = edge_port; urb->dev = dev; - status = usb_submit_urb (urb, GFP_KERNEL); + status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status); + dev_err(&port->dev, + "%s - read bulk usb_submit_urb failed with value %d\n", + __func__, status); goto unlink_int_urb; } @@ -2119,7 +2002,8 @@ release_es_lock: return status; } -static void edge_close (struct usb_serial_port *port, struct file *filp) +static void edge_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; @@ -2127,18 +2011,18 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) int status; dbg("%s - port %d", __func__, port->number); - + edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); - if ((edge_serial == NULL) || (edge_port == NULL)) + if (edge_serial == NULL || edge_port == NULL) return; - - /* The bulkreadcompletion routine will check + + /* The bulkreadcompletion routine will check * this flag and dump add read data */ edge_port->close_pending = 1; /* chase the port close and flush */ - TIChasePort (edge_port, (HZ*closing_wait)/100, 1); + chase_port(edge_port, (HZ * closing_wait) / 100, 1); usb_kill_urb(port->read_urb); usb_kill_urb(port->write_urb); @@ -2148,7 +2032,7 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) * send a close port command to it */ dbg("%s - send umpc_close_port", __func__); port_number = port->number - port->serial->minor; - status = TIWriteCommandSync (port->serial->dev, + status = send_cmd(port->serial->dev, UMPC_CLOSE_PORT, (__u8)(UMPM_UART1_PORT + port_number), 0, @@ -2167,7 +2051,8 @@ static void edge_close (struct usb_serial_port *port, struct file *filp) dbg("%s - exited", __func__); } -static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count) +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; @@ -2188,16 +2073,16 @@ static int edge_write (struct usb_serial_port *port, const unsigned char *data, count = edge_buf_put(edge_port->ep_out_buf, data, count); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - edge_send(port); + edge_send(tty); return count; } -static void edge_send(struct usb_serial_port *port) +static void edge_send(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int count, result; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned long flags; @@ -2223,11 +2108,12 @@ static void edge_send(struct usb_serial_port *port) spin_unlock_irqrestore(&edge_port->ep_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, + port->write_urb->transfer_buffer); /* set up our urb */ - usb_fill_bulk_urb (port->write_urb, port->serial->dev, - usb_sndbulkpipe (port->serial->dev, + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, count, edge_bulk_out_callback, @@ -2236,23 +2122,23 @@ static void edge_send(struct usb_serial_port *port) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); edge_port->ep_write_urb_in_use = 0; - // TODO: reschedule edge_send - } else { + /* TODO: reschedule edge_send */ + } else edge_port->icount.tx += count; - } /* wakeup any process waiting for writes to complete */ /* there is now more room in the buffer for new writes */ - if (tty) { - /* let the tty driver wakeup if it has a special write_wakeup function */ + if (tty) tty_wakeup(tty); - } } -static int edge_write_room (struct usb_serial_port *port) +static int edge_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -2260,9 +2146,9 @@ static int edge_write_room (struct usb_serial_port *port) dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) - return -ENODEV; + return 0; if (edge_port->close_pending == 1) - return -ENODEV; + return 0; spin_lock_irqsave(&edge_port->ep_lock, flags); room = edge_buf_space_avail(edge_port->ep_out_buf); @@ -2272,8 +2158,9 @@ static int edge_write_room (struct usb_serial_port *port) return room; } -static int edge_chars_in_buffer (struct usb_serial_port *port) +static int edge_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; @@ -2281,22 +2168,22 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) - return -ENODEV; + return 0; if (edge_port->close_pending == 1) - return -ENODEV; + return 0; spin_lock_irqsave(&edge_port->ep_lock, flags); chars = edge_buf_data_avail(edge_port->ep_out_buf); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg ("%s - returns %d", __func__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } -static void edge_throttle (struct usb_serial_port *port) +static void edge_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty; int status; dbg("%s - port %d", __func__, port->number); @@ -2304,16 +2191,10 @@ static void edge_throttle (struct usb_serial_port *port) if (edge_port == NULL) return; - tty = port->tty; - if (!tty) { - dbg ("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = edge_write (port, &stop_char, 1); + status = edge_write(tty, port, &stop_char, 1); if (status <= 0) { dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status); } @@ -2326,10 +2207,10 @@ static void edge_throttle (struct usb_serial_port *port) } -static void edge_unthrottle (struct usb_serial_port *port) +static void edge_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty; int status; dbg("%s - port %d", __func__, port->number); @@ -2337,27 +2218,22 @@ static void edge_unthrottle (struct usb_serial_port *port) if (edge_port == NULL) return; - tty = port->tty; - if (!tty) { - dbg ("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); - status = edge_write (port, &start_char, 1); + status = edge_write(tty, port, &start_char, 1); if (status <= 0) { dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status); } } - /* if we are implementing RTS/CTS, restart reads */ /* are the Edgeport will assert the RTS line */ if (C_CRTSCTS(tty)) { status = restart_read(edge_port); if (status) - dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status); + dev_err(&port->dev, + "%s - read bulk usb_submit_urb failed: %d\n", + __func__, status); } } @@ -2398,22 +2274,23 @@ static int restart_read(struct edgeport_port *edge_port) return status; } -static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios) +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, struct ktermios *old_termios) { struct ump_uart_config *config; - struct tty_struct *tty; int baud; unsigned cflag; int status; - int port_number = edge_port->port->number - edge_port->port->serial->minor; + int port_number = edge_port->port->number - + edge_port->port->serial->minor; dbg("%s - port %d", __func__, edge_port->port->number); - tty = edge_port->port->tty; - config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { - dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__); + *tty->termios = *old_termios; + dev_err(&edge_port->port->dev, "%s - out of memory\n", + __func__); return; } @@ -2427,22 +2304,22 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi config->bUartMode = (__u8)(edge_port->bUartMode); switch (cflag & CSIZE) { - case CS5: - config->bDataBits = UMP_UART_CHAR5BITS; - dbg ("%s - data bits = 5", __func__); - break; - case CS6: - config->bDataBits = UMP_UART_CHAR6BITS; - dbg ("%s - data bits = 6", __func__); - break; - case CS7: - config->bDataBits = UMP_UART_CHAR7BITS; - dbg ("%s - data bits = 7", __func__); - break; - default: - case CS8: - config->bDataBits = UMP_UART_CHAR8BITS; - dbg ("%s - data bits = 8", __func__); + case CS5: + config->bDataBits = UMP_UART_CHAR5BITS; + dbg("%s - data bits = 5", __func__); + break; + case CS6: + config->bDataBits = UMP_UART_CHAR6BITS; + dbg("%s - data bits = 6", __func__); + break; + case CS7: + config->bDataBits = UMP_UART_CHAR7BITS; + dbg("%s - data bits = 7", __func__); + break; + default: + case CS8: + config->bDataBits = UMP_UART_CHAR8BITS; + dbg("%s - data bits = 8", __func__); break; } @@ -2457,7 +2334,7 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi dbg("%s - parity = even", __func__); } } else { - config->bParity = UMP_UART_NOPARITY; + config->bParity = UMP_UART_NOPARITY; dbg("%s - parity = none", __func__); } @@ -2480,29 +2357,26 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi restart_read(edge_port); } - /* if we are implementing XON/XOFF, set the start and stop character in the device */ - if (I_IXOFF(tty) || I_IXON(tty)) { - config->cXon = START_CHAR(tty); - config->cXoff = STOP_CHAR(tty); + /* if we are implementing XON/XOFF, set the start and stop + character in the device */ + config->cXon = START_CHAR(tty); + config->cXoff = STOP_CHAR(tty); - /* if we are implementing INBOUND XON/XOFF */ - if (I_IXOFF(tty)) { - config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; - dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); - } else { - dbg ("%s - INBOUND XON/XOFF is disabled", __func__); - } + /* if we are implementing INBOUND XON/XOFF */ + if (I_IXOFF(tty)) { + config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; + dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, config->cXon, config->cXoff); + } else + dbg("%s - INBOUND XON/XOFF is disabled", __func__); - /* if we are implementing OUTBOUND XON/XOFF */ - if (I_IXON(tty)) { - config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; - dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); - } else { - dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__); - } - } + /* if we are implementing OUTBOUND XON/XOFF */ + if (I_IXON(tty)) { + config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; + dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", + __func__, config->cXon, config->cXoff); + } else + dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); tty->termios->c_cflag &= ~CMSPAR; @@ -2519,41 +2393,36 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi /* FIXME: Recompute actual baud from divisor here */ - dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate); + dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud, + config->wBaudRate); - dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate)); - dbg ("wFlags: 0x%x", config->wFlags); - dbg ("bDataBits: %d", config->bDataBits); - dbg ("bParity: %d", config->bParity); - dbg ("bStopBits: %d", config->bStopBits); - dbg ("cXon: %d", config->cXon); - dbg ("cXoff: %d", config->cXoff); - dbg ("bUartMode: %d", config->bUartMode); + dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate)); + dbg("wFlags: 0x%x", config->wFlags); + dbg("bDataBits: %d", config->bDataBits); + dbg("bParity: %d", config->bParity); + dbg("bStopBits: %d", config->bStopBits); + dbg("cXon: %d", config->cXon); + dbg("cXoff: %d", config->cXoff); + dbg("bUartMode: %d", config->bUartMode); /* move the word values into big endian mode */ - cpu_to_be16s (&config->wFlags); - cpu_to_be16s (&config->wBaudRate); + cpu_to_be16s(&config->wFlags); + cpu_to_be16s(&config->wBaudRate); - status = TIWriteCommandSync (edge_port->port->serial->dev, - UMPC_SET_CONFIG, + status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG, (__u8)(UMPM_UART1_PORT + port_number), - 0, - (__u8 *)config, - sizeof(*config)); - if (status) { - dbg ("%s - error %d when trying to write config to device", + 0, (__u8 *)config, sizeof(*config)); + if (status) + dbg("%s - error %d when trying to write config to device", __func__, status); - } - - kfree (config); - + kfree(config); return; } -static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned int cflag; cflag = tty->termios->c_cflag; @@ -2562,20 +2431,19 @@ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old tty->termios->c_cflag, tty->termios->c_iflag); dbg("%s - old clfag %08x old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __func__, port->number); if (edge_port == NULL) return; - /* change the port settings to the new ones specified */ - change_port_settings (edge_port, old_termios); - + change_port_settings(tty, edge_port, old_termios); return; } -static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) +static int edge_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int mcr; unsigned long flags; @@ -2601,13 +2469,13 @@ static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsig edge_port->shadow_mcr = mcr; spin_unlock_irqrestore(&edge_port->ep_lock, flags); - TIRestoreMCR (edge_port, mcr); - + restore_mcr(edge_port, mcr); return 0; } -static int edge_tiocmget(struct usb_serial_port *port, struct file *file) +static int edge_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int result = 0; unsigned int msr; @@ -2634,7 +2502,8 @@ static int edge_tiocmget(struct usb_serial_port *port, struct file *file) return result; } -static int get_serial_info (struct edgeport_port *edge_port, struct serial_struct __user *retinfo) +static int get_serial_info(struct edgeport_port *edge_port, + struct serial_struct __user *retinfo) { struct serial_struct tmp; @@ -2652,18 +2521,16 @@ static int get_serial_info (struct edgeport_port *edge_port, struct serial_struc tmp.baud_base = 9600; tmp.close_delay = 5*HZ; tmp.closing_wait = closing_wait; -// tmp.custom_divisor = state->custom_divisor; -// tmp.hub6 = state->hub6; -// tmp.io_type = state->io_type; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) return -EFAULT; return 0; } -static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) +static int edge_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct async_icount cnow; struct async_icount cprev; @@ -2671,81 +2538,64 @@ static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { - case TIOCINQ: - dbg("%s - (%d) TIOCINQ", __func__, port->number); -// return get_number_bytes_avail(edge_port, (unsigned int *) arg); - break; - - case TIOCSERGETLSR: - dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number); -// return get_lsr_info(edge_port, (unsigned int *) arg); - break; - - case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); - return get_serial_info(edge_port, (struct serial_struct __user *) arg); - break; - - case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); - break; - - case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); - cprev = edge_port->icount; - while (1) { - interruptible_sleep_on(&edge_port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; + case TIOCGSERIAL: + dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + return get_serial_info(edge_port, + (struct serial_struct __user *) arg); + case TIOCMIWAIT: + dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + cprev = edge_port->icount; + while (1) { + interruptible_sleep_on(&edge_port->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = edge_port->icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; } - /* not reached */ - break; - - case TIOCGICOUNT: - dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, edge_port->icount.rx, edge_port->icount.tx); - if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount))) - return -EFAULT; - return 0; + cprev = cnow; + } + /* not reached */ + break; + case TIOCGICOUNT: + dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, + port->number, edge_port->icount.rx, edge_port->icount.tx); + if (copy_to_user((void __user *)arg, &edge_port->icount, + sizeof(edge_port->icount))) + return -EFAULT; + return 0; } - return -ENOIOCTLCMD; } -static void edge_break (struct usb_serial_port *port, int break_state) +static void edge_break(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; + int bv = 0; /* Off */ - dbg ("%s - state = %d", __func__, break_state); + dbg("%s - state = %d", __func__, break_state); /* chase the port close */ - TIChasePort (edge_port, 0, 0); + chase_port(edge_port, 0, 0); - if (break_state == -1) { - status = TISetBreak (edge_port); - } else { - status = TIClearBreak (edge_port); - } - if (status) { - dbg ("%s - error %d sending break set/clear command.", + if (break_state == -1) + bv = 1; /* On */ + status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); + if (status) + dbg("%s - error %d sending break set/clear command.", __func__, status); - } } -static int edge_startup (struct usb_serial *serial) +static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; @@ -2765,9 +2615,9 @@ static int edge_startup (struct usb_serial *serial) edge_serial->serial = serial; usb_set_serial_data(serial, edge_serial); - status = TIDownloadFirmware (edge_serial); + status = download_fw(edge_serial); if (status) { - kfree (edge_serial); + kfree(edge_serial); return status; } @@ -2775,13 +2625,15 @@ static int edge_startup (struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", + __func__); goto cleanup; } spin_lock_init(&edge_port->ep_lock); edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE); if (edge_port->ep_out_buf == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + dev_err(&serial->dev->dev, "%s - Out of memory\n", + __func__); kfree(edge_port); goto cleanup; } @@ -2790,27 +2642,27 @@ static int edge_startup (struct usb_serial *serial) usb_set_serial_port_data(serial->port[i], edge_port); edge_port->bUartMode = default_uart_mode; } - + return 0; cleanup: - for (--i; i>=0; --i) { + for (--i; i >= 0; --i) { edge_port = usb_get_serial_port_data(serial->port[i]); edge_buf_free(edge_port->ep_out_buf); kfree(edge_port); usb_set_serial_port_data(serial->port[i], NULL); } - kfree (edge_serial); + kfree(edge_serial); usb_set_serial_data(serial, NULL); return -ENOMEM; } -static void edge_shutdown (struct usb_serial *serial) +static void edge_shutdown(struct usb_serial *serial) { int i; struct edgeport_port *edge_port; - dbg ("%s", __func__); + dbg("%s", __func__); for (i = 0; i < serial->num_ports; ++i) { edge_port = usb_get_serial_port_data(serial->port[i]); @@ -2852,7 +2704,8 @@ static ssize_t store_uart_mode(struct device *dev, return count; } -static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode, store_uart_mode); +static DEVICE_ATTR(uart_mode, S_IWUSR | S_IRUGO, show_uart_mode, + store_uart_mode); static int edge_create_sysfs_attrs(struct usb_serial_port *port) { @@ -2922,9 +2775,9 @@ static void edge_buf_free(struct edge_buf *eb) static void edge_buf_clear(struct edge_buf *eb) { - if (eb != NULL) - eb->buf_get = eb->buf_put; - /* equivalent to a get of all data available */ + if (eb != NULL) + eb->buf_get = eb->buf_put; + /* equivalent to a get of all data available */ } @@ -2937,10 +2790,9 @@ static void edge_buf_clear(struct edge_buf *eb) static unsigned int edge_buf_data_avail(struct edge_buf *eb) { - if (eb != NULL) - return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size); - else + if (eb == NULL) return 0; + return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size); } @@ -2953,10 +2805,9 @@ static unsigned int edge_buf_data_avail(struct edge_buf *eb) static unsigned int edge_buf_space_avail(struct edge_buf *eb) { - if (eb != NULL) - return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size); - else + if (eb == NULL) return 0; + return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size); } @@ -3113,7 +2964,7 @@ static int __init edgeport_init(void) if (retval) goto failed_2port_device_register; retval = usb_register(&io_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_DESC " " DRIVER_VERSION); return 0; @@ -3125,11 +2976,11 @@ failed_1port_device_register: return retval; } -static void __exit edgeport_exit (void) +static void __exit edgeport_exit(void) { - usb_deregister (&io_driver); - usb_serial_deregister (&edgeport_1port_device); - usb_serial_deregister (&edgeport_2port_device); + usb_deregister(&io_driver); + usb_serial_deregister(&edgeport_1port_device); + usb_serial_deregister(&edgeport_2port_device); } module_init(edgeport_init); @@ -3151,8 +3002,8 @@ module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(ignore_cpu_rev, "Ignore the cpu revision when connecting to a device"); +MODULE_PARM_DESC(ignore_cpu_rev, + "Ignore the cpu revision when connecting to a device"); module_param(default_uart_mode, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ..."); - diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d9fb3768a2d..832a5a4f3cb 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -53,7 +53,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "ipaq.h" @@ -74,19 +74,21 @@ static int connect_retries = KP_RETRIES; static int initial_wait; /* Function prototypes for an ipaq */ -static int ipaq_open (struct usb_serial_port *port, struct file *filp); -static void ipaq_close (struct usb_serial_port *port, struct file *filp); -static int ipaq_startup (struct usb_serial *serial); -static void ipaq_shutdown (struct usb_serial *serial); -static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf, - int count); -static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf, - int count); +static int ipaq_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void ipaq_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int ipaq_startup(struct usb_serial *serial); +static void ipaq_shutdown(struct usb_serial *serial); +static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int ipaq_write_bulk(struct usb_serial_port *port, + const unsigned char *buf, int count); static void ipaq_write_gather(struct usb_serial_port *port); -static void ipaq_read_bulk_callback (struct urb *urb); +static void ipaq_read_bulk_callback(struct urb *urb); static void ipaq_write_bulk_callback(struct urb *urb); -static int ipaq_write_room(struct usb_serial_port *port); -static int ipaq_chars_in_buffer(struct usb_serial_port *port); +static int ipaq_write_room(struct tty_struct *tty); +static int ipaq_chars_in_buffer(struct tty_struct *tty); static void ipaq_destroy_lists(struct usb_serial_port *port); @@ -550,7 +552,7 @@ static struct usb_device_id ipaq_id_table [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, ipaq_id_table); +MODULE_DEVICE_TABLE(usb, ipaq_id_table); static struct usb_driver ipaq_driver = { .name = "ipaq", @@ -591,7 +593,8 @@ static spinlock_t write_list_lock; static int bytes_in; static int bytes_out; -static int ipaq_open(struct usb_serial_port *port, struct file *filp) +static int ipaq_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; struct ipaq_private *priv; @@ -617,9 +620,9 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) for (i = 0; i < URBDATA_QUEUE_MAX / PACKET_SIZE; i++) { pkt = kmalloc(sizeof(struct ipaq_packet), GFP_KERNEL); - if (pkt == NULL) { + if (pkt == NULL) goto enomem; - } + pkt->data = kmalloc(PACKET_SIZE, GFP_KERNEL); if (pkt->data == NULL) { kfree(pkt); @@ -637,21 +640,24 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) * discipline instead of queueing. */ - port->tty->low_latency = 1; - port->tty->raw = 1; - port->tty->real_raw = 1; - + if (tty) { + tty->low_latency = 1; + /* FIXME: These two are bogus */ + tty->raw = 1; + tty->real_raw = 1; + } /* * Lose the small buffers usbserial provides. Make larger ones. */ kfree(port->bulk_in_buffer); - kfree(port->bulk_out_buffer); port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL); if (port->bulk_in_buffer == NULL) { port->bulk_out_buffer = NULL; /* prevent double free */ goto enomem; } + + kfree(port->bulk_out_buffer); port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL); if (port->bulk_out_buffer == NULL) { kfree(port->bulk_in_buffer); @@ -661,8 +667,9 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) port->read_urb->transfer_buffer = port->bulk_in_buffer; port->write_urb->transfer_buffer = port->bulk_out_buffer; port->read_urb->transfer_buffer_length = URBDATA_SIZE; - port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE; - + port->bulk_out_size = port->write_urb->transfer_buffer_length + = URBDATA_SIZE; + msleep(1000*initial_wait); /* @@ -691,13 +698,15 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - ipaq_read_bulk_callback, port); + usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ipaq_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - err("%s - failed submitting read urb, error %d", __func__, result); + err("%s - failed submitting read urb, error %d", + __func__, result); goto error; } @@ -713,12 +722,13 @@ error: } -static void ipaq_close(struct usb_serial_port *port, struct file *filp) +static void ipaq_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct ipaq_private *priv = usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); - + /* * shut down bulk read and write */ @@ -728,7 +738,8 @@ static void ipaq_close(struct usb_serial_port *port, struct file *filp) kfree(priv); usb_set_serial_port_data(port, NULL); - /* Uncomment the following line if you want to see some statistics in your syslog */ + /* Uncomment the following line if you want to see some statistics + * in your syslog */ /* info ("Bytes In = %d Bytes Out = %d", bytes_in, bytes_out); */ } @@ -748,9 +759,10 @@ static void ipaq_read_bulk_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -759,18 +771,20 @@ static void ipaq_read_bulk_callback(struct urb *urb) } /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - ipaq_read_bulk_callback, port); + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ipaq_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); return; } -static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf, - int count) +static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { const unsigned char *current_position = buf; int bytes_sent = 0; @@ -780,9 +794,8 @@ static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf, while (count > 0) { transfer_size = min(count, PACKET_SIZE); - if (ipaq_write_bulk(port, current_position, transfer_size)) { + if (ipaq_write_bulk(port, current_position, transfer_size)) break; - } current_position += transfer_size; bytes_sent += transfer_size; count -= transfer_size; @@ -790,10 +803,10 @@ static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf, } return bytes_sent; -} +} -static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf, - int count) +static int ipaq_write_bulk(struct usb_serial_port *port, + const unsigned char *buf, int count) { struct ipaq_private *priv = usb_get_serial_port_data(port); struct ipaq_packet *pkt = NULL; @@ -830,9 +843,9 @@ static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *bu ipaq_write_gather(port); spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); - } + if (result) + err("%s - failed submitting write urb, error %d", + __func__, result); } else { spin_unlock_irqrestore(&write_list_lock, flags); } @@ -859,16 +872,15 @@ static void ipaq_write_gather(struct usb_serial_port *port) list_move(&pkt->list, &priv->freelist); priv->free_len += PACKET_SIZE; } - if (room == 0) { + if (room == 0) break; - } } count = URBDATA_SIZE - room; - usb_fill_bulk_urb(port->write_urb, serial->dev, - usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, count, ipaq_write_bulk_callback, - port); + usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, count, + ipaq_write_bulk_callback, port); return; } @@ -893,9 +905,9 @@ static void ipaq_write_bulk_callback(struct urb *urb) ipaq_write_gather(port); spin_unlock_irqrestore(&write_list_lock, flags); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); - } + if (result) + err("%s - failed submitting write urb, error %d", + __func__, result); } else { priv->active = 0; spin_unlock_irqrestore(&write_list_lock, flags); @@ -904,16 +916,18 @@ static void ipaq_write_bulk_callback(struct urb *urb) usb_serial_port_softint(port); } -static int ipaq_write_room(struct usb_serial_port *port) +static int ipaq_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ipaq_private *priv = usb_get_serial_port_data(port); dbg("%s - freelen %d", __func__, priv->free_len); return priv->free_len; } -static int ipaq_chars_in_buffer(struct usb_serial_port *port) +static int ipaq_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ipaq_private *priv = usb_get_serial_port_data(port); dbg("%s - queuelen %d", __func__, priv->queue_len); @@ -944,7 +958,7 @@ static int ipaq_startup(struct usb_serial *serial) serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } - return usb_reset_configuration (serial->dev); + return usb_reset_configuration(serial->dev); } static void ipaq_shutdown(struct usb_serial *serial) @@ -957,7 +971,7 @@ static int __init ipaq_init(void) int retval; spin_lock_init(&write_list_lock); retval = usb_serial_register(&ipaq_device); - if (retval) + if (retval) goto failed_usb_serial_register; info(DRIVER_DESC " " DRIVER_VERSION); if (vendor) { @@ -967,7 +981,7 @@ static int __init ipaq_init(void) retval = usb_register(&ipaq_driver); if (retval) goto failed_usb_register; - + return 0; failed_usb_register: usb_serial_deregister(&ipaq_device); @@ -986,8 +1000,8 @@ static void __exit ipaq_exit(void) module_init(ipaq_init); module_exit(ipaq_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); @@ -1000,7 +1014,9 @@ module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified USB idProduct"); module_param(connect_retries, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); +MODULE_PARM_DESC(connect_retries, + "Maximum number of connect retries (one second each)"); module_param(initial_wait, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)"); +MODULE_PARM_DESC(initial_wait, + "Time to wait before attempting a connection (in seconds)"); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index bc85ca5c1c3..a842025b9b5 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -10,27 +10,27 @@ * (at your option) any later version. * * All information about the device was acquired using SnoopyPro - * on MSFT's O/S, and examing the MSFT drivers' debug output + * on MSFT's O/S, and examing the MSFT drivers' debug output * (insanely left _on_ in the enduser version) * * It was written out of frustration with the IPWireless USB modem * supplied by Axity3G/Sentech South Africa not supporting * Linux whatsoever. * - * Nobody provided any proprietary information that was not already + * Nobody provided any proprietary information that was not already * available for this device. - * - * The modem adheres to the "3GPP TS 27.007 AT command set for 3G - * User Equipment (UE)" standard, available from + * + * The modem adheres to the "3GPP TS 27.007 AT command set for 3G + * User Equipment (UE)" standard, available from * http://www.3gpp.org/ftp/Specs/html-info/27007.htm * * The code was only tested the IPWireless handheld modem distributed * in South Africa by Sentech. - * + * * It may work for Woosh Inc in .nz too, as it appears they use the * same kit. * - * There is still some work to be done in terms of handling + * There is still some work to be done in terms of handling * DCD, DTR, RTS, CTS which are currently faked. * It's good enough for PPP at this point. It's based off all kinds of * code found in usb/serial and usb/class @@ -47,7 +47,7 @@ #include <linux/spinlock.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> /* * Version Information @@ -64,7 +64,7 @@ /* Message sizes */ #define EVENT_BUFFER_SIZE 0xFF -#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) +#define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) #define NUM_BULK_URBS 24 #define NUM_CONTROL_URBS 16 @@ -94,33 +94,34 @@ enum { /* data bits */ #define ipw_dtb_7 0x700 -#define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1 - // I mean, is there a point to any other setting these days? :) +#define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */ + /* I mean, is there a point to any other setting these days? :) */ /* usb control request types : */ -#define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off) -#define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx -#define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x -#define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx -#define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0 -#define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open) -#define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge -#define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes -#define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes, - // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 +#define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */ +#define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */ +#define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */ +#define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */ +#define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */ +#define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */ +#define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */ +#define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */ +#define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */ + /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */ /* values used for request IPW_SIO_SET_PIN */ #define IPW_PIN_SETDTR 0x101 #define IPW_PIN_SETRTS 0x202 #define IPW_PIN_CLRDTR 0x100 -#define IPW_PIN_CLRRTS 0x200 // unconfirmed +#define IPW_PIN_CLRRTS 0x200 /* unconfirmed */ /* values used for request IPW_SIO_RXCTL */ #define IPW_RXBULK_ON 1 #define IPW_RXBULK_OFF 0 /* various 16 byte hardcoded transferbuffers used by flow control */ -#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } +#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0 } /* Interpretation of modem status lines */ /* These need sorting out by individually connecting pins and checking @@ -132,17 +133,6 @@ enum { #define IPW_CTS ((1<<5) | (1<<4)) #define IPW_WANTS_TO_SEND 0x30 -//#define IPW_DTR /* Data Terminal Ready */ -//#define IPW_CTS /* Clear To Send */ -//#define IPW_CD /* Carrier Detect */ -//#define IPW_DSR /* Data Set Ready */ -//#define IPW_RxD /* Receive pin */ - -//#define IPW_LE -//#define IPW_RTS -//#define IPW_ST -//#define IPW_SR -//#define IPW_RI /* Ring Indicator */ static struct usb_device_id usb_ipw_ids[] = { { USB_DEVICE(IPW_VID, IPW_PID) }, @@ -177,9 +167,10 @@ static void ipw_read_bulk_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -187,19 +178,22 @@ static void ipw_read_bulk_callback(struct urb *urb) } /* Continue trying to always read */ - usb_fill_bulk_urb (port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - ipw_read_bulk_callback, port); + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); return; } -static int ipw_open(struct usb_serial_port *port, struct file *filp) +static int ipw_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_device *dev = port->serial->dev; u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; @@ -212,29 +206,33 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) if (!buf_flow_init) return -ENOMEM; - if (port->tty) - port->tty->low_latency = 1; - - /* --1: Tell the modem to initialize (we think) From sniffs this is always the - * first thing that gets sent to the modem during opening of the device */ - dbg("%s: Sending SIO_INIT (we guess)",__func__); - result = usb_control_msg(dev, usb_sndctrlpipe(dev,0), - IPW_SIO_INIT, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0, - 0, /* index */ - NULL, - 0, - 100000); + if (tty) + tty->low_latency = 1; + + /* --1: Tell the modem to initialize (we think) From sniffs this is + * always the first thing that gets sent to the modem during + * opening of the device */ + dbg("%s: Sending SIO_INIT (we guess)", __func__); + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + IPW_SIO_INIT, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, /* index */ + NULL, + 0, + 100000); if (result < 0) - dev_err(&port->dev, "Init of modem failed (error = %d)\n", result); + dev_err(&port->dev, + "Init of modem failed (error = %d)\n", result); /* reset the bulk pipes */ - usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); - usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); + usb_clear_halt(dev, + usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); + usb_clear_halt(dev, + usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); - /*--2: Start reading from the device */ - dbg("%s: setting up bulk read callback",__func__); + /*--2: Start reading from the device */ + dbg("%s: setting up bulk read callback", __func__); usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->bulk_in_buffer, @@ -242,66 +240,72 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) ipw_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result < 0) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result); + dbg("%s - usb_submit_urb(read bulk) failed with status %d", + __func__, result); /*--3: Tell the modem to open the floodgates on the rx bulk channel */ - dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__); + dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_RXCTL, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_RXBULK_ON, - 0, /* index */ - NULL, - 0, - 100000); - if (result < 0) - dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result); + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_ON, + 0, /* index */ + NULL, + 0, + 100000); + if (result < 0) + dev_err(&port->dev, + "Enabling bulk RxRead failed (error = %d)\n", result); /*--4: setup the initial flowcontrol */ - dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init); + dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_HANDFLOW, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0, - 0, - buf_flow_init, - 0x10, - 200000); + IPW_SIO_HANDFLOW, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, + buf_flow_init, + 0x10, + 200000); if (result < 0) - dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result); + dev_err(&port->dev, + "initial flowcontrol failed (error = %d)\n", result); /*--5: raise the dtr */ - dbg("%s:raising dtr",__func__); + dbg("%s:raising dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_SETDTR, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_SETDTR, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); + dev_err(&port->dev, + "setting dtr failed (error = %d)\n", result); /*--6: raise the rts */ - dbg("%s:raising rts",__func__); + dbg("%s:raising rts", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_SETRTS, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_SETRTS, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "setting dtr failed (error = %d)\n", result); - + dev_err(&port->dev, + "setting dtr failed (error = %d)\n", result); + kfree(buf_flow_init); return 0; } -static void ipw_close(struct usb_serial_port *port, struct file * filp) +static void ipw_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_device *dev = port->serial->dev; int result; @@ -312,56 +316,62 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp) } /*--1: drop the dtr */ - dbg("%s:dropping dtr",__func__); + dbg("%s:dropping dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRDTR, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_CLRDTR, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result); + dev_err(&port->dev, "dropping dtr failed (error = %d)\n", + result); /*--2: drop the rts */ - dbg("%s:dropping rts",__func__); + dbg("%s:dropping rts", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRRTS, - 0, - NULL, - 0, - 200000); + IPW_SIO_SET_PIN, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_PIN_CLRRTS, + 0, + NULL, + 0, + 200000); if (result < 0) - dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); + dev_err(&port->dev, + "dropping rts failed (error = %d)\n", result); /*--3: purge */ - dbg("%s:sending purge",__func__); + dbg("%s:sending purge", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - 0x03, - 0, - NULL, - 0, - 200000); + IPW_SIO_PURGE, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + 0x03, + 0, + NULL, + 0, + 200000); if (result < 0) dev_err(&port->dev, "purge failed (error = %d)\n", result); - /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */ + /* send RXBULK_off (tell modem to stop transmitting bulk data on + rx chan) */ result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - IPW_SIO_RXCTL, - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_RXBULK_OFF, - 0, /* index */ - NULL, - 0, - 100000); + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_OFF, + 0, /* index */ + NULL, + 0, + 100000); if (result < 0) - dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result); + dev_err(&port->dev, + "Disabling bulk RxRead failed (error = %d)\n", result); /* shutdown any in-flight urbs that we know about */ usb_kill_urb(port->read_urb); @@ -384,13 +394,14 @@ static void ipw_write_bulk_callback(struct urb *urb) usb_serial_port_softint(port); } -static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count) +static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct usb_device *dev = port->serial->dev; int ret; dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__, - count, in_interrupt() ); + count, in_interrupt()); if (count == 0) { dbg("%s - write request of 0 bytes", __func__); @@ -421,13 +432,14 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (ret != 0) { port->write_urb_busy = 0; - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret); + dbg("%s - usb_submit_urb(write bulk) failed with error = %d", + __func__, ret); return ret; } dbg("%s returning %d", __func__, count); return count; -} +} static int ipw_probe(struct usb_serial_port *port) { @@ -486,8 +498,8 @@ module_init(usb_ipw_init); module_exit(usb_ipw_exit); /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 004d57385a7..e59155c6607 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -19,7 +19,12 @@ * was written by Roman Weissgaerber <weissg@vienna.at>, Dag Brattli * <dag@brattli.net>, and Jean Tourrilhes <jt@hpl.hp.com> * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * 2008_Jun_02 Felipe Balbi <me@felipebalbi.com> + * Introduced common header to be used also in USB Gadget Framework. + * Still needs some other style fixes. * * 2007_Jun_21 Alan Cox <alan@redhat.com> * Minimal cleanups for some of the driver problens and tty layer abuse. @@ -59,9 +64,10 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/usb/irda.h> /* * Version Information @@ -70,100 +76,77 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" #define DRIVER_DESC "USB IR Dongle driver" -/* USB IrDA class spec information */ -#define USB_CLASS_IRDA 0x02 -#define USB_DT_IRDA 0x21 -#define IU_REQ_GET_CLASS_DESC 0x06 -#define SPEED_2400 0x01 -#define SPEED_9600 0x02 -#define SPEED_19200 0x03 -#define SPEED_38400 0x04 -#define SPEED_57600 0x05 -#define SPEED_115200 0x06 -#define SPEED_576000 0x07 -#define SPEED_1152000 0x08 -#define SPEED_4000000 0x09 - -struct irda_class_desc { - u8 bLength; - u8 bDescriptorType; - u16 bcdSpecRevision; - u8 bmDataSize; - u8 bmWindowSize; - u8 bmMinTurnaroundTime; - u16 wBaudRate; - u8 bmAdditionalBOFs; - u8 bIrdaRateSniff; - u8 bMaxUnicastList; -} __attribute__ ((packed)); - static int debug; /* if overridden by the user, then use their value for the size of the read and * write urbs */ static int buffer_size; + /* if overridden by the user, then use the specified number of XBOFs */ static int xbof = -1; static int ir_startup (struct usb_serial *serial); -static int ir_open (struct usb_serial_port *port, struct file *filep); -static void ir_close (struct usb_serial_port *port, struct file *filep); -static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int count); +static int ir_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filep); +static void ir_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filep); +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); static void ir_write_bulk_callback (struct urb *urb); static void ir_read_bulk_callback (struct urb *urb); -static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios); +static void ir_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); /* Not that this lot means you can only have one per system */ -static u8 ir_baud = 0; -static u8 ir_xbof = 0; -static u8 ir_add_bof = 0; +static u8 ir_baud; +static u8 ir_xbof; +static u8 ir_add_bof; -static struct usb_device_id id_table [] = { +static struct usb_device_id ir_id_table[] = { { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */ { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */ { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */ - { USB_INTERFACE_INFO (USB_CLASS_APP_SPEC, USB_CLASS_IRDA, 0) }, + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, USB_SUBCLASS_IRDA, 0) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, ir_id_table); static struct usb_driver ir_driver = { - .name = "ir-usb", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, + .name = "ir-usb", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = ir_id_table, + .no_dynamic_id = 1, }; - static struct usb_serial_driver ir_device = { - .driver = { - .owner = THIS_MODULE, - .name = "ir-usb", + .driver = { + .owner = THIS_MODULE, + .name = "ir-usb", }, - .description = "IR Dongle", - .usb_driver = &ir_driver, - .id_table = id_table, - .num_ports = 1, - .set_termios = ir_set_termios, - .attach = ir_startup, - .open = ir_open, - .close = ir_close, - .write = ir_write, - .write_bulk_callback = ir_write_bulk_callback, - .read_bulk_callback = ir_read_bulk_callback, + .description = "IR Dongle", + .usb_driver = &ir_driver, + .id_table = ir_id_table, + .num_ports = 1, + .set_termios = ir_set_termios, + .attach = ir_startup, + .open = ir_open, + .close = ir_close, + .write = ir_write, + .write_bulk_callback = ir_write_bulk_callback, + .read_bulk_callback = ir_read_bulk_callback, }; -static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc) +static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc) { dbg("bLength=%x", desc->bLength); dbg("bDescriptorType=%x", desc->bDescriptorType); - dbg("bcdSpecRevision=%x", desc->bcdSpecRevision); + dbg("bcdSpecRevision=%x", __le16_to_cpu(desc->bcdSpecRevision)); dbg("bmDataSize=%x", desc->bmDataSize); dbg("bmWindowSize=%x", desc->bmWindowSize); dbg("bmMinTurnaroundTime=%d", desc->bmMinTurnaroundTime); - dbg("wBaudRate=%x", desc->wBaudRate); + dbg("wBaudRate=%x", __le16_to_cpu(desc->wBaudRate)); dbg("bmAdditionalBOFs=%x", desc->bmAdditionalBOFs); dbg("bIrdaRateSniff=%x", desc->bIrdaRateSniff); dbg("bMaxUnicastList=%x", desc->bMaxUnicastList); @@ -181,35 +164,37 @@ static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc) * * Based on the same function in drivers/net/irda/irda-usb.c */ -static struct irda_class_desc *irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum) +static struct usb_irda_cs_descriptor * +irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum) { - struct irda_class_desc *desc; + struct usb_irda_cs_descriptor *desc; int ret; - - desc = kzalloc(sizeof (struct irda_class_desc), GFP_KERNEL); - if (desc == NULL) + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) return NULL; - - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev,0), - IU_REQ_GET_CLASS_DESC, + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_CS_IRDA_GET_CLASS_DESC, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, ifnum, desc, sizeof(*desc), 1000); - + dbg("%s - ret=%d", __func__, ret); if (ret < sizeof(*desc)) { dbg("%s - class descriptor read %s (%d)", __func__, - (ret<0) ? "failed" : "too short", + (ret < 0) ? "failed" : "too short", ret); goto error; } - if (desc->bDescriptorType != USB_DT_IRDA) { + if (desc->bDescriptorType != USB_DT_CS_IRDA) { dbg("%s - bad class descriptor type", __func__); goto error; } - + irda_usb_dump_class_desc(desc); return desc; + error: kfree(desc); return NULL; @@ -219,64 +204,101 @@ error: static u8 ir_xbof_change(u8 xbof) { u8 result; + /* reference irda-usb.c */ - switch(xbof) { - case 48: result = 0x10; break; - case 28: - case 24: result = 0x20; break; - default: - case 12: result = 0x30; break; - case 5: - case 6: result = 0x40; break; - case 3: result = 0x50; break; - case 2: result = 0x60; break; - case 1: result = 0x70; break; - case 0: result = 0x80; break; + switch (xbof) { + case 48: + result = 0x10; + break; + case 28: + case 24: + result = 0x20; + break; + default: + case 12: + result = 0x30; + break; + case 5: + case 6: + result = 0x40; + break; + case 3: + result = 0x50; + break; + case 2: + result = 0x60; + break; + case 1: + result = 0x70; + break; + case 0: + result = 0x80; + break; } + return(result); } -static int ir_startup (struct usb_serial *serial) +static int ir_startup(struct usb_serial *serial) { - struct irda_class_desc *irda_desc; + struct usb_irda_cs_descriptor *irda_desc; - irda_desc = irda_usb_find_class_desc (serial->dev, 0); - if (irda_desc == NULL) { - dev_err (&serial->dev->dev, "IRDA class descriptor not found, device not bound\n"); + irda_desc = irda_usb_find_class_desc(serial->dev, 0); + if (!irda_desc) { + dev_err(&serial->dev->dev, + "IRDA class descriptor not found, device not bound\n"); return -ENODEV; } - dbg ("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s", + dbg("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s", __func__, - (irda_desc->wBaudRate & 0x0001) ? " 2400" : "", - (irda_desc->wBaudRate & 0x0002) ? " 9600" : "", - (irda_desc->wBaudRate & 0x0004) ? " 19200" : "", - (irda_desc->wBaudRate & 0x0008) ? " 38400" : "", - (irda_desc->wBaudRate & 0x0010) ? " 57600" : "", - (irda_desc->wBaudRate & 0x0020) ? " 115200" : "", - (irda_desc->wBaudRate & 0x0040) ? " 576000" : "", - (irda_desc->wBaudRate & 0x0080) ? " 1152000" : "", - (irda_desc->wBaudRate & 0x0100) ? " 4000000" : ""); - - switch( irda_desc->bmAdditionalBOFs ) { - case 0x01: ir_add_bof = 48; break; - case 0x02: ir_add_bof = 24; break; - case 0x04: ir_add_bof = 12; break; - case 0x08: ir_add_bof = 6; break; - case 0x10: ir_add_bof = 3; break; - case 0x20: ir_add_bof = 2; break; - case 0x40: ir_add_bof = 1; break; - case 0x80: ir_add_bof = 0; break; - default:; + (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : ""); + + switch (irda_desc->bmAdditionalBOFs) { + case USB_IRDA_AB_48: + ir_add_bof = 48; + break; + case USB_IRDA_AB_24: + ir_add_bof = 24; + break; + case USB_IRDA_AB_12: + ir_add_bof = 12; + break; + case USB_IRDA_AB_6: + ir_add_bof = 6; + break; + case USB_IRDA_AB_3: + ir_add_bof = 3; + break; + case USB_IRDA_AB_2: + ir_add_bof = 2; + break; + case USB_IRDA_AB_1: + ir_add_bof = 1; + break; + case USB_IRDA_AB_0: + ir_add_bof = 0; + break; + default: + break; } - kfree (irda_desc); + kfree(irda_desc); - return 0; + return 0; } -static int ir_open (struct usb_serial_port *port, struct file *filp) +static int ir_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { char *buffer; int result = 0; @@ -285,51 +307,56 @@ static int ir_open (struct usb_serial_port *port, struct file *filp) if (buffer_size) { /* override the default buffer sizes */ - buffer = kmalloc (buffer_size, GFP_KERNEL); + buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (&port->dev, "%s - out of memory.\n", __func__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } - kfree (port->read_urb->transfer_buffer); + kfree(port->read_urb->transfer_buffer); port->read_urb->transfer_buffer = buffer; port->read_urb->transfer_buffer_length = buffer_size; - buffer = kmalloc (buffer_size, GFP_KERNEL); + buffer = kmalloc(buffer_size, GFP_KERNEL); if (!buffer) { - dev_err (&port->dev, "%s - out of memory.\n", __func__); + dev_err(&port->dev, "%s - out of memory.\n", __func__); return -ENOMEM; } - kfree (port->write_urb->transfer_buffer); + kfree(port->write_urb->transfer_buffer); port->write_urb->transfer_buffer = buffer; port->write_urb->transfer_buffer_length = buffer_size; port->bulk_out_size = buffer_size; } /* Start reading from the device */ - usb_fill_bulk_urb ( + usb_fill_bulk_urb( port->read_urb, - port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), + port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ir_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); return result; } -static void ir_close (struct usb_serial_port *port, struct file * filp) +static void ir_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file * filp) { dbg("%s - port %d", __func__, port->number); - + /* shutdown our bulk read */ usb_kill_urb(port->read_urb); } -static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { unsigned char *transfer_buffer; int result; @@ -337,11 +364,6 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int dbg("%s - port = %d, count = %d", __func__, port->number, count); - if (!port->tty) { - dev_err (&port->dev, "%s - no tty???\n", __func__); - return 0; - } - if (count == 0) return 0; @@ -359,7 +381,7 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int /* * The first byte of the packet we send to the device contains an - * inband header which indicates an additional number of BOFs and + * inbound header which indicates an additional number of BOFs and * a baud rate change. * * See section 5.4.2.2 of the USB IrDA spec. @@ -367,9 +389,9 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int *transfer_buffer = ir_xbof | ir_baud; ++transfer_buffer; - memcpy (transfer_buffer, buf, transfer_size); + memcpy(transfer_buffer, buf, transfer_size); - usb_fill_bulk_urb ( + usb_fill_bulk_urb( port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -381,17 +403,19 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int port->write_urb->transfer_flags = URB_ZERO_PACKET; - result = usb_submit_urb (port->write_urb, GFP_ATOMIC); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { port->write_urb_busy = 0; - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); } else result = transfer_size; return result; } -static void ir_write_bulk_callback (struct urb *urb) +static void ir_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -405,7 +429,7 @@ static void ir_write_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data ( + usb_serial_debug_data( debug, &port->dev, __func__, @@ -415,7 +439,7 @@ static void ir_write_bulk_callback (struct urb *urb) usb_serial_port_softint(port); } -static void ir_read_bulk_callback (struct urb *urb) +static void ir_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct tty_struct *tty; @@ -425,74 +449,61 @@ static void ir_read_bulk_callback (struct urb *urb) dbg("%s - port %d", __func__, port->number); - if (!port->open_count) { + if (!port->port.count) { dbg("%s - port closed.", __func__); return; } switch (status) { - case 0: /* Successful */ - - /* - * The first byte of the packet we get from the device - * contains a busy indicator and baud rate change. - * See section 5.4.1.2 of the USB IrDA spec. - */ - if ((*data & 0x0f) > 0) - ir_baud = *data & 0x0f; - - usb_serial_debug_data ( - debug, - &port->dev, - __func__, - urb->actual_length, - data); - - tty = port->tty; - - if (tty_buffer_request_room(tty, urb->actual_length - 1)) { - tty_insert_flip_string(tty, data+1, urb->actual_length - 1); - tty_flip_buffer_push(tty); - } - - /* - * No break here. - * We want to resubmit the urb so we can read - * again. - */ + case 0: /* Successful */ + /* + * The first byte of the packet we get from the device + * contains a busy indicator and baud rate change. + * See section 5.4.1.2 of the USB IrDA spec. + */ + if ((*data & 0x0f) > 0) + ir_baud = *data & 0x0f; + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); + tty = port->port.tty; + if (tty_buffer_request_room(tty, urb->actual_length - 1)) { + tty_insert_flip_string(tty, data+1, urb->actual_length - 1); + tty_flip_buffer_push(tty); + } - case -EPROTO: /* taking inspiration from pl2303.c */ + /* + * No break here. + * We want to resubmit the urb so we can read + * again. + */ + case -EPROTO: /* taking inspiration from pl2303.c */ /* Continue trying to always read */ - usb_fill_bulk_urb ( - port->read_urb, - port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - ir_read_bulk_callback, - port); - - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", - __func__, result); - - break ; - - default: - dbg("%s - nonzero read bulk status received: %d", - __func__, - status); + usb_fill_bulk_urb( + port->read_urb, + port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + ir_read_bulk_callback, + port); + + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); break ; - + default: + dbg("%s - nonzero read bulk status received: %d", + __func__, status); + break ; } - return; } -static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) +static void ir_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { unsigned char *transfer_buffer; int result; @@ -501,7 +512,7 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t dbg("%s - port %d", __func__, port->number); - baud = tty_get_baud_rate(port->tty); + baud = tty_get_baud_rate(tty); /* * FIXME, we should compare the baud request against the @@ -510,19 +521,36 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t */ switch (baud) { - case 2400: ir_baud = SPEED_2400; break; - case 9600: ir_baud = SPEED_9600; break; - case 19200: ir_baud = SPEED_19200; break; - case 38400: ir_baud = SPEED_38400; break; - case 57600: ir_baud = SPEED_57600; break; - case 115200: ir_baud = SPEED_115200; break; - case 576000: ir_baud = SPEED_576000; break; - case 1152000: ir_baud = SPEED_1152000; break; - case 4000000: ir_baud = SPEED_4000000; break; - break; - default: - ir_baud = SPEED_9600; - baud = 9600; + case 2400: + ir_baud = USB_IRDA_BR_2400; + break; + case 9600: + ir_baud = USB_IRDA_BR_9600; + break; + case 19200: + ir_baud = USB_IRDA_BR_19200; + break; + case 38400: + ir_baud = USB_IRDA_BR_38400; + break; + case 57600: + ir_baud = USB_IRDA_BR_57600; + break; + case 115200: + ir_baud = USB_IRDA_BR_115200; + break; + case 576000: + ir_baud = USB_IRDA_BR_576000; + break; + case 1152000: + ir_baud = USB_IRDA_BR_1152000; + break; + case 4000000: + ir_baud = USB_IRDA_BR_4000000; + break; + default: + ir_baud = USB_IRDA_BR_9600; + baud = 9600; } if (xbof == -1) @@ -538,10 +566,11 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t transfer_buffer = port->write_urb->transfer_buffer; *transfer_buffer = ir_xbof | ir_baud; - usb_fill_bulk_urb ( + usb_fill_bulk_urb( port->write_urb, port->serial->dev, - usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), port->write_urb->transfer_buffer, 1, ir_write_bulk_callback, @@ -549,38 +578,44 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t port->write_urb->transfer_flags = URB_ZERO_PACKET; - result = usb_submit_urb (port->write_urb, GFP_KERNEL); + result = usb_submit_urb(port->write_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); /* Only speed changes are supported */ - tty_termios_copy_hw(port->tty->termios, old_termios); - tty_encode_baud_rate(port->tty, baud, baud); + tty_termios_copy_hw(tty->termios, old_termios); + tty_encode_baud_rate(tty, baud, baud); } - -static int __init ir_init (void) +static int __init ir_init(void) { int retval; + retval = usb_serial_register(&ir_device); if (retval) goto failed_usb_serial_register; + retval = usb_register(&ir_driver); - if (retval) + if (retval) goto failed_usb_register; + info(DRIVER_DESC " " DRIVER_VERSION); + return 0; + failed_usb_register: usb_serial_deregister(&ir_device); + failed_usb_serial_register: return retval; } - -static void __exit ir_exit (void) +static void __exit ir_exit(void) { - usb_deregister (&ir_driver); - usb_serial_deregister (&ir_device); + usb_deregister(&ir_driver); + usb_serial_deregister(&ir_device); } diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index a01e987c7d3..ddff37fa633 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -144,9 +144,10 @@ static void iuu_shutdown(struct usb_serial *serial) } } -static int iuu_tiocmset(struct usb_serial_port *port, struct file *file, +static int iuu_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -171,8 +172,9 @@ static int iuu_tiocmset(struct usb_serial_port *port, struct file *file, * When no card , the reader respond with TIOCM_CD * This is known as CD autodetect mechanism */ -static int iuu_tiocmget(struct usb_serial_port *port, struct file *file) +static int iuu_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; int rc; @@ -316,11 +318,10 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) port->bulk_out_endpointAddress), buf, count, &actual, HZ * 1); - if (status != IUU_OPERATION_OK) { + if (status != IUU_OPERATION_OK) dbg("%s - error = %2x", __func__, status); - } else { + else dbg("%s - write OK !", __func__); - } return status; } @@ -340,12 +341,10 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) port->bulk_in_endpointAddress), buf, count, &actual, HZ * 1); - if (status != IUU_OPERATION_OK) { + if (status != IUU_OPERATION_OK) dbg("%s - error = %2x", __func__, status); - } else { + else dbg("%s - read OK !", __func__); - } - return status; } @@ -630,7 +629,7 @@ static void read_buf_callback(struct urb *urb) } dbg("%s - %i chars to write", __func__, urb->actual_length); - tty = port->tty; + tty = port->port.tty; if (data == NULL) dbg("%s - data is NULL !!!", __func__); if (tty && urb->actual_length && data) { @@ -752,11 +751,10 @@ static void iuu_uart_read_callback(struct urb *urb) /* if nothing to write call again rxcmd */ dbg("%s - rxcmd recall", __func__); iuu_led_activity_off(urb); - return; } -static int iuu_uart_write(struct usb_serial_port *port, const u8 *buf, - int count) +static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, + const u8 *buf, int count) { struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -769,14 +767,14 @@ static int iuu_uart_write(struct usb_serial_port *port, const u8 *buf, if (priv->writelen > 0) { /* buffer already filled but not commited */ spin_unlock_irqrestore(&priv->lock, flags); - return (0); + return 0; } /* fill the buffer */ memcpy(priv->writebuf, buf, count); priv->writelen = count; spin_unlock_irqrestore(&priv->lock, flags); - return (count); + return count; } static void read_rxcmd_callback(struct urb *urb) @@ -948,7 +946,8 @@ static int set_control_lines(struct usb_device *dev, u8 value) return 0; } -static void iuu_close(struct usb_serial_port *port, struct file *filp) +static void iuu_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { /* iuu_led (port,255,0,0,0); */ struct usb_serial *serial; @@ -964,8 +963,8 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp) iuu_uart_off(port); if (serial->dev) { - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; if (c_cflag & HUPCL) { /* drop DTR and RTS */ priv = usb_get_serial_port_data(port); @@ -989,7 +988,8 @@ static void iuu_close(struct usb_serial_port *port, struct file *filp) } } -static int iuu_open(struct usb_serial_port *port, struct file *filp) +static int iuu_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; u8 *buf; @@ -1036,15 +1036,17 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp) /* set the termios structure */ spin_lock_irqsave(&priv->lock, flags); - if (!priv->termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 - | TIOCM_CTS | CSTOPB | PARENB; - port->tty->termios->c_lflag = 0; - port->tty->termios->c_oflag = 0; - port->tty->termios->c_iflag = 0; + if (tty && !priv->termios_initialized) { + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 + | TIOCM_CTS | CSTOPB | PARENB; + tty->termios->c_ispeed = 9600; + tty->termios->c_ospeed = 9600; + tty->termios->c_lflag = 0; + tty->termios->c_oflag = 0; + tty->termios->c_iflag = 0; priv->termios_initialized = 1; - port->tty->low_latency = 1; + tty->low_latency = 1; priv->poll = 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -1148,7 +1150,7 @@ static int iuu_open(struct usb_serial_port *port, struct file *filp) if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - iuu_close(port, NULL); + iuu_close(tty, port, NULL); return -EPROTO; } else { dbg("%s - rxcmd OK", __func__); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 11e439b90ea..704716f6f6d 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1,29 +1,29 @@ /* Keyspan USB to Serial Converter driver - + (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org> (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com> - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See http://misc.nu/hugh/keyspan.html for more information. - + Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. This driver has been put together with the support of Innosys, Inc. and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. Thanks Guys :) - + Thanks to Paulus for miscellaneous tidy ups, some largish chunks of much nicer and/or completely new code and (perhaps most uniquely) having the patience to sit down and explain why and where he'd changed - stuff. - - Tip 'o the hat to IBM (and previously Linuxcare :) for supporting + stuff. + + Tip 'o the hat to IBM (and previously Linuxcare :) for supporting staff in their work on open source projects. Change History @@ -70,21 +70,21 @@ Thu May 31 11:56:42 PDT 2001 gkh switched from using spinlock to a semaphore - + (04/08/2001) gb Identify version on module load. - + (11/01/2000) Adam J. Richter usb_device_id table support. - + Tue Oct 10 23:15:33 EST 2000 Hugh Merged Paul's changes with my USA-49W mods. Work in progress still... - + Wed Jul 19 14:00:42 EST 2000 gkh Added module_init and module_exit functions to handle the fact that this driver is a loadable module now. - + Tue Jul 18 16:14:52 EST 2000 Hugh Basic character input/output for USA-19 now mostly works, fixed at 9600 baud for the moment. @@ -107,7 +107,7 @@ #include <linux/spinlock.h> #include <linux/firmware.h> #include <linux/ihex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "keyspan.h" @@ -132,15 +132,15 @@ struct keyspan_serial_private { struct urb *instat_urb; char instat_buf[INSTAT_BUFLEN]; - /* added to support 49wg, where data from all 4 ports comes in on 1 EP */ - /* and high-speed supported */ + /* added to support 49wg, where data from all 4 ports comes in + on 1 EP and high-speed supported */ struct urb *indat_urb; char indat_buf[INDAT49W_BUFLEN]; /* XXX this one probably will need a lock */ struct urb *glocont_urb; char glocont_buf[GLOCONT_BUFLEN]; - char ctrl_buf[8]; // for EP0 control message + char ctrl_buf[8]; /* for EP0 control message */ }; struct keyspan_port_private { @@ -186,19 +186,19 @@ struct keyspan_port_private { int resend_cont; /* need to resend control packet */ }; - /* Include Keyspan message headers. All current Keyspan Adapters make use of one of five message formats which are referred - to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within this driver. */ + to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and + within this driver. */ #include "keyspan_usa26msg.h" #include "keyspan_usa28msg.h" #include "keyspan_usa49msg.h" #include "keyspan_usa90msg.h" #include "keyspan_usa67msg.h" - + /* Functions used by new usb-serial code. */ -static int __init keyspan_init (void) +static int __init keyspan_init(void) { int retval; retval = usb_serial_register(&keyspan_pre_device); @@ -214,7 +214,7 @@ static int __init keyspan_init (void) if (retval) goto failed_4port_device_register; retval = usb_register(&keyspan_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_VERSION ":" DRIVER_DESC); @@ -232,35 +232,24 @@ failed_pre_device_register: return retval; } -static void __exit keyspan_exit (void) +static void __exit keyspan_exit(void) { - usb_deregister (&keyspan_driver); - usb_serial_deregister (&keyspan_pre_device); - usb_serial_deregister (&keyspan_1port_device); - usb_serial_deregister (&keyspan_2port_device); - usb_serial_deregister (&keyspan_4port_device); + usb_deregister(&keyspan_driver); + usb_serial_deregister(&keyspan_pre_device); + usb_serial_deregister(&keyspan_1port_device); + usb_serial_deregister(&keyspan_2port_device); + usb_serial_deregister(&keyspan_4port_device); } module_init(keyspan_init); module_exit(keyspan_exit); -static void keyspan_rx_throttle (struct usb_serial_port *port) -{ - dbg("%s - port %d", __func__, port->number); -} - - -static void keyspan_rx_unthrottle (struct usb_serial_port *port) -{ - dbg("%s - port %d", __func__, port->number); -} - - -static void keyspan_break_ctl (struct usb_serial_port *port, int break_state) +static void keyspan_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct keyspan_port_private *p_priv; - dbg("%s", __func__); + dbg("%s", __func__); p_priv = usb_get_serial_port_data(port); @@ -273,14 +262,13 @@ static void keyspan_break_ctl (struct usb_serial_port *port, int break_state) } -static void keyspan_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void keyspan_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { int baud_rate, device_port; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; unsigned int cflag; - struct tty_struct *tty = port->tty; dbg("%s", __func__); @@ -292,7 +280,7 @@ static void keyspan_set_termios (struct usb_serial_port *port, /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ baud_rate = tty_get_baud_rate(tty); - /* If no match or invalid, don't change */ + /* If no match or invalid, don't change */ if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ @@ -312,35 +300,32 @@ static void keyspan_set_termios (struct usb_serial_port *port, keyspan_send_setup(port, 0); } -static int keyspan_tiocmget(struct usb_serial_port *port, struct file *file) +static int keyspan_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); unsigned int value; - struct keyspan_port_private *p_priv; - p_priv = usb_get_serial_port_data(port); - value = ((p_priv->rts_state) ? TIOCM_RTS : 0) | ((p_priv->dtr_state) ? TIOCM_DTR : 0) | ((p_priv->cts_state) ? TIOCM_CTS : 0) | ((p_priv->dsr_state) ? TIOCM_DSR : 0) | ((p_priv->dcd_state) ? TIOCM_CAR : 0) | - ((p_priv->ri_state) ? TIOCM_RNG : 0); + ((p_priv->ri_state) ? TIOCM_RNG : 0); return value; } -static int keyspan_tiocmset(struct usb_serial_port *port, struct file *file, +static int keyspan_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct keyspan_port_private *p_priv; + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); - p_priv = usb_get_serial_port_data(port); - if (set & TIOCM_RTS) p_priv->rts_state = 1; if (set & TIOCM_DTR) p_priv->dtr_state = 1; - if (clear & TIOCM_RTS) p_priv->rts_state = 0; if (clear & TIOCM_DTR) @@ -349,35 +334,29 @@ static int keyspan_tiocmset(struct usb_serial_port *port, struct file *file, return 0; } -static int keyspan_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - - /* Write function is similar for the four protocols used - with only a minor change for usa90 (usa19hs) required */ -static int keyspan_write(struct usb_serial_port *port, - const unsigned char *buf, int count) +/* Write function is similar for the four protocols used + with only a minor change for usa90 (usa19hs) required */ +static int keyspan_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; int flip; int left, todo; struct urb *this_urb; - int err, maxDataLen, dataOffset; + int err, maxDataLen, dataOffset; p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; if (d_details->msg_format == msg_usa90) { - maxDataLen = 64; + maxDataLen = 64; dataOffset = 0; } else { maxDataLen = 63; dataOffset = 1; } - + dbg("%s - for port %d (%d chars), flip=%d", __func__, port->number, count, p_priv->out_flip); @@ -387,37 +366,40 @@ static int keyspan_write(struct usb_serial_port *port, todo = maxDataLen; flip = p_priv->out_flip; - + /* Check we have a valid urb/endpoint before we use it... */ - if ((this_urb = p_priv->out_urbs[flip]) == NULL) { + this_urb = p_priv->out_urbs[flip]; + if (this_urb == NULL) { /* no bulk out, so return 0 bytes written */ dbg("%s - no output urb :(", __func__); return count; } - dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip); + dbg("%s - endpoint %d flip %d", + __func__, usb_pipeendpoint(this_urb->pipe), flip); if (this_urb->status == -EINPROGRESS) { - if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ)) + if (time_before(jiffies, + p_priv->tx_start_time[flip] + 10 * HZ)) break; usb_unlink_urb(this_urb); break; } - /* First byte in buffer is "last flag" (except for usa19hx) - unused so - for now so set to zero */ + /* First byte in buffer is "last flag" (except for usa19hx) + - unused so for now so set to zero */ ((char *)this_urb->transfer_buffer)[0] = 0; - memcpy (this_urb->transfer_buffer + dataOffset, buf, todo); + memcpy(this_urb->transfer_buffer + dataOffset, buf, todo); buf += todo; /* send the data out the bulk port */ this_urb->transfer_buffer_length = todo + dataOffset; this_urb->dev = port->serial->dev; - if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) dbg("usb_submit_urb(write bulk) failed (%d)", err); - } p_priv->tx_start_time[flip] = jiffies; /* Flip for next time if usa26 or usa28 interface @@ -437,7 +419,7 @@ static void usa26_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); @@ -448,17 +430,18 @@ static void usa26_indat_callback(struct urb *urb) } port = urb->context; - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { - /* no errors on individual bytes, only possible overrun err*/ + /* no errors on individual bytes, only + possible overrun err */ if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else err = 0; - for (i = 1; i < urb->actual_length ; ++i) { + err = TTY_OVERRUN; + else + err = 0; + for (i = 1; i < urb->actual_length ; ++i) tty_insert_flip_char(tty, data[i], err); - } } else { /* some bytes had errors, every byte has status */ dbg("%s - RX error!!!!", __func__); @@ -476,17 +459,19 @@ static void usa26_indat_callback(struct urb *urb) } tty_flip_buffer_push(tty); } - - /* Resubmit urb so we continue receiving */ + + /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->open_count) - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } + if (port->port.count) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); + } return; } - /* Outdat handling is common for all devices */ +/* Outdat handling is common for all devices */ static void usa2x_outdat_callback(struct urb *urb) { struct usb_serial_port *port; @@ -494,16 +479,16 @@ static void usa2x_outdat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); + dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]); - if (port->open_count) + if (port->port.count) usb_serial_port_softint(port); } static void usa26_inack_callback(struct urb *urb) { - dbg ("%s", __func__); - + dbg("%s", __func__); + } static void usa26_outcont_callback(struct urb *urb) @@ -515,8 +500,9 @@ static void usa26_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __func__); - keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1); + dbg("%s - sending setup", __func__); + keyspan_usa26_send_setup(port->serial, port, + p_priv->resend_cont - 1); } } @@ -552,14 +538,14 @@ static void usa26_instat_callback(struct urb *urb) /* Now do something useful with the data */ - /* Check port number from message and retrieve private data */ + /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __func__, msg->port); + dbg("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; p_priv = usb_get_serial_port_data(port); - + /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); @@ -567,39 +553,38 @@ static void usa26_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state != p_priv->dcd_state) { if (old_dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); /* else */ /* wake_up_interruptible(&p_priv->open_wait); */ } - + /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } exit: ; } static void usa26_glocont_callback(struct urb *urb) { - dbg ("%s", __func__); - + dbg("%s", __func__); } static void usa28_indat_callback(struct urb *urb) { - int i, err; + int err; struct usb_serial_port *port; struct tty_struct *tty; unsigned char *data; struct keyspan_port_private *p_priv; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); port = urb->context; p_priv = usb_get_serial_port_data(port); @@ -619,20 +604,20 @@ static void usa28_indat_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); data = urb->transfer_buffer; - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { - for (i = 0; i < urb->actual_length ; ++i) { - tty_insert_flip_char(tty, data[i], 0); - } + tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->open_count) - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } + if (port->port.count) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); + } p_priv->in_flip ^= 1; urb = p_priv->in_urbs[p_priv->in_flip]; @@ -641,7 +626,7 @@ static void usa28_indat_callback(struct urb *urb) static void usa28_inack_callback(struct urb *urb) { - dbg ("%s", __func__); + dbg("%s", __func__); } static void usa28_outcont_callback(struct urb *urb) @@ -653,8 +638,9 @@ static void usa28_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __func__); - keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1); + dbg("%s - sending setup", __func__); + keyspan_usa28_send_setup(port->serial, port, + p_priv->resend_cont - 1); } } @@ -684,19 +670,18 @@ static void usa28_instat_callback(struct urb *urb) /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__ data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10], data[11]);*/ - - /* Now do something useful with the data */ - msg = (struct keyspan_usa28_portStatusMessage *)data; + /* Now do something useful with the data */ + msg = (struct keyspan_usa28_portStatusMessage *)data; - /* Check port number from message and retrieve private data */ + /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __func__, msg->port); + dbg("%s - Unexpected port number %d", __func__, msg->port); goto exit; } port = serial->port[msg->port]; p_priv = usb_get_serial_port_data(port); - + /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; p_priv->cts_state = ((msg->cts) ? 1 : 0); @@ -704,25 +689,25 @@ static void usa28_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state != p_priv->dcd_state) { if (old_dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); /* else */ /* wake_up_interruptible(&p_priv->open_wait); */ } /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } exit: ; } static void usa28_glocont_callback(struct urb *urb) { - dbg ("%s", __func__); + dbg("%s", __func__); } @@ -733,7 +718,7 @@ static void usa49_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __func__); + dbg("%s", __func__); serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -741,8 +726,9 @@ static void usa49_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __func__); - keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1); + dbg("%s - sending setup", __func__); + keyspan_usa49_send_setup(serial, port, + p_priv->resend_cont - 1); break; } } @@ -761,7 +747,7 @@ static void usa49_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); serial = urb->context; @@ -770,7 +756,8 @@ static void usa49_instat_callback(struct urb *urb) return; } - if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) { + if (urb->actual_length != + sizeof(struct keyspan_usa49_portStatusMessage)) { dbg("%s - bad length %d", __func__, urb->actual_length); goto exit; } @@ -778,18 +765,19 @@ static void usa49_instat_callback(struct urb *urb) /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__, data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7], data[8], data[9], data[10]);*/ - - /* Now do something useful with the data */ + + /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; - /* Check port number from message and retrieve private data */ + /* Check port number from message and retrieve private data */ if (msg->portNumber >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __func__, msg->portNumber); + dbg("%s - Unexpected port number %d", + __func__, msg->portNumber); goto exit; } port = serial->port[msg->portNumber]; p_priv = usb_get_serial_port_data(port); - + /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; p_priv->cts_state = ((msg->cts) ? 1 : 0); @@ -797,26 +785,26 @@ static void usa49_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state != p_priv->dcd_state) { if (old_dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); /* else */ /* wake_up_interruptible(&p_priv->open_wait); */ } - /* Resubmit urb so we continue receiving */ + /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } exit: ; } static void usa49_inack_callback(struct urb *urb) { - dbg ("%s", __func__); + dbg("%s", __func__); } static void usa49_indat_callback(struct urb *urb) @@ -828,7 +816,7 @@ static void usa49_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); @@ -839,14 +827,13 @@ static void usa49_indat_callback(struct urb *urb) } port = urb->context; - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { /* no error on any byte */ - for (i = 1; i < urb->actual_length ; ++i) { - tty_insert_flip_char(tty, data[i], 0); - } + tty_insert_flip_string(tty, data + 1, + urb->actual_length - 1); } else { /* some bytes had errors, every byte has status */ for (i = 0; i + 1 < urb->actual_length; i += 2) { @@ -863,13 +850,15 @@ static void usa49_indat_callback(struct urb *urb) } tty_flip_buffer_push(tty); } - - /* Resubmit urb so we continue receiving */ + + /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->open_count) - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } + if (port->port.count) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); + } } static void usa49wg_indat_callback(struct urb *urb) @@ -881,7 +870,7 @@ static void usa49wg_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); serial = urb->context; @@ -899,12 +888,12 @@ static void usa49wg_indat_callback(struct urb *urb) /* Check port number from message*/ if (data[i] >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", + dbg("%s - Unexpected port number %d", __func__, data[i]); return; } port = serial->port[data[i++]]; - tty = port->tty; + tty = port->port.tty; len = data[i++]; /* 0x80 bit is error flag */ @@ -912,7 +901,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* no error on any byte */ i++; for (x = 1; x < len ; ++x) - if (port->open_count) + if (port->port.count) tty_insert_flip_char(tty, data[i++], 0); else @@ -930,13 +919,13 @@ static void usa49wg_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - if (port->open_count) + if (port->port.count) tty_insert_flip_char(tty, data[i+1], flag); i += 2; } } - if (port->open_count) + if (port->port.count) tty_flip_buffer_push(tty); } } @@ -952,7 +941,7 @@ static void usa49wg_indat_callback(struct urb *urb) /* not used, usa-49 doesn't have per-port control endpoints */ static void usa49_outcont_callback(struct urb *urb) { - dbg ("%s", __func__); + dbg("%s", __func__); } static void usa90_indat_callback(struct urb *urb) @@ -965,7 +954,7 @@ static void usa90_indat_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); endpoint = usb_pipeendpoint(urb->pipe); @@ -978,29 +967,26 @@ static void usa90_indat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { - /* if current mode is DMA, looks like usa28 format - otherwise looks like usa26 data format */ + otherwise looks like usa26 data format */ - if (p_priv->baud > 57600) { - for (i = 0; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], 0); - } + if (p_priv->baud > 57600) + tty_insert_flip_string(tty, data, urb->actual_length); else { - /* 0x80 bit is error flag */ if ((data[0] & 0x80) == 0) { - /* no errors on individual bytes, only possible overrun err*/ + /* no errors on individual bytes, only + possible overrun err*/ if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else err = 0; - for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(tty, data[i], err); - - } - else { + err = TTY_OVERRUN; + else + err = 0; + for (i = 1; i < urb->actual_length ; ++i) + tty_insert_flip_char(tty, data[i], + err); + } else { /* some bytes had errors, every byte has status */ dbg("%s - RX error!!!!", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { @@ -1012,19 +998,22 @@ static void usa90_indat_callback(struct urb *urb) if (stat & RXERROR_PARITY) flag |= TTY_PARITY; /* XXX should handle break (0x10) */ - tty_insert_flip_char(tty, data[i+1], flag); + tty_insert_flip_char(tty, data[i+1], + flag); } } } tty_flip_buffer_push(tty); } - + /* Resubmit urb so we continue receiving */ urb->dev = port->serial->dev; - if (port->open_count) - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { - dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } + if (port->port.count) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dbg("%s - resubmit read urb failed. (%d)", + __func__, err); + } return; } @@ -1056,7 +1045,7 @@ static void usa90_instat_callback(struct urb *urb) port = serial->port[0]; p_priv = usb_get_serial_port_data(port); - + /* Update handshaking pin state information */ old_dcd_state = p_priv->dcd_state; p_priv->cts_state = ((msg->cts) ? 1 : 0); @@ -1064,19 +1053,19 @@ static void usa90_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state != p_priv->dcd_state) { if (old_dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); /* else */ /* wake_up_interruptible(&p_priv->open_wait); */ } - + /* Resubmit urb so we continue receiving */ urb->dev = serial->dev; - if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) dbg("%s - resubmit read urb failed. (%d)", __func__, err); - } exit: ; } @@ -1090,8 +1079,9 @@ static void usa90_outcont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __func__); - keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1); + dbg("%s - sending setup", __func__); + keyspan_usa90_send_setup(port->serial, port, + p_priv->resend_cont - 1); } } @@ -1107,7 +1097,7 @@ static void usa67_instat_callback(struct urb *urb) int old_dcd_state; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); serial = urb->context; @@ -1116,7 +1106,8 @@ static void usa67_instat_callback(struct urb *urb) return; } - if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) { + if (urb->actual_length != + sizeof(struct keyspan_usa67_portStatusMessage)) { dbg("%s - bad length %d", __func__, urb->actual_length); return; } @@ -1127,7 +1118,7 @@ static void usa67_instat_callback(struct urb *urb) /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { - dbg ("%s - Unexpected port number %d", __func__, msg->port); + dbg("%s - Unexpected port number %d", __func__, msg->port); return; } @@ -1139,10 +1130,10 @@ static void usa67_instat_callback(struct urb *urb) p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state != p_priv->dcd_state) { if (old_dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); /* else */ /* wake_up_interruptible(&p_priv->open_wait); */ } @@ -1161,7 +1152,7 @@ static void usa67_glocont_callback(struct urb *urb) struct keyspan_port_private *p_priv; int i; - dbg ("%s", __func__); + dbg("%s", __func__); serial = urb->context; for (i = 0; i < serial->num_ports; ++i) { @@ -1169,7 +1160,7 @@ static void usa67_glocont_callback(struct urb *urb) p_priv = usb_get_serial_port_data(port); if (p_priv->resend_cont) { - dbg ("%s - sending setup", __func__); + dbg("%s - sending setup", __func__); keyspan_usa67_send_setup(serial, port, p_priv->resend_cont - 1); break; @@ -1177,8 +1168,9 @@ static void usa67_glocont_callback(struct urb *urb) } } -static int keyspan_write_room (struct usb_serial_port *port) +static int keyspan_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; int flip; @@ -1191,32 +1183,30 @@ static int keyspan_write_room (struct usb_serial_port *port) /* FIXME: locking */ if (d_details->msg_format == msg_usa90) - data_len = 64; + data_len = 64; else data_len = 63; flip = p_priv->out_flip; /* Check both endpoints to see if any are available. */ - if ((this_urb = p_priv->out_urbs[flip]) != NULL) { + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { if (this_urb->status != -EINPROGRESS) - return (data_len); - flip = (flip + 1) & d_details->outdat_endp_flip; - if ((this_urb = p_priv->out_urbs[flip]) != NULL) + return data_len; + flip = (flip + 1) & d_details->outdat_endp_flip; + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { if (this_urb->status != -EINPROGRESS) - return (data_len); + return data_len; + } } return 0; } -static int keyspan_chars_in_buffer (struct usb_serial_port *port) -{ - return 0; -} - - -static int keyspan_open (struct usb_serial_port *port, struct file *filp) +static int keyspan_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct keyspan_port_private *p_priv; struct keyspan_serial_private *s_priv; @@ -1225,7 +1215,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) int i, err; int baud_rate, device_port; struct urb *urb; - unsigned int cflag; + unsigned int cflag = 0; s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1247,50 +1237,53 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) /* Reset low level data toggle and start reading from endpoints */ for (i = 0; i < 2; i++) { - if ((urb = p_priv->in_urbs[i]) == NULL) + urb = p_priv->in_urbs[i]; + if (urb == NULL) continue; urb->dev = serial->dev; - /* make sure endpoint data toggle is synchronized with the device */ - + /* make sure endpoint data toggle is synchronized + with the device */ usb_clear_halt(urb->dev, urb->pipe); - - if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) { - dbg("%s - submit urb %d failed (%d)", __func__, i, err); - } + err = usb_submit_urb(urb, GFP_KERNEL); + if (err != 0) + dbg("%s - submit urb %d failed (%d)", + __func__, i, err); } /* Reset low level data toggle on out endpoints */ for (i = 0; i < 2; i++) { - if ((urb = p_priv->out_urbs[i]) == NULL) + urb = p_priv->out_urbs[i]; + if (urb == NULL) continue; urb->dev = serial->dev; - /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 0); */ } /* get the terminal config for the setup message now so we don't * need to send 2 of them */ - cflag = port->tty->termios->c_cflag; device_port = port->number - port->serial->minor; - - /* Baud rate calculation takes baud rate as an integer - so other rates can be generated if desired. */ - baud_rate = tty_get_baud_rate(port->tty); - /* If no match or invalid, leave as default */ - if (baud_rate >= 0 - && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, - NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { - p_priv->baud = baud_rate; + if (tty) { + cflag = tty->termios->c_cflag; + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(tty); + /* If no match or invalid, leave as default */ + if (baud_rate >= 0 + && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + p_priv->baud = baud_rate; + } } - /* set CTS/RTS handshake etc. */ p_priv->cflag = cflag; p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none; keyspan_send_setup(port, 1); - //mdelay(100); - //keyspan_set_termios(port, NULL); + /* mdelay(100); */ + /* keyspan_set_termios(port, NULL); */ return 0; } @@ -1301,7 +1294,8 @@ static inline void stop_urb(struct urb *urb) usb_kill_urb(urb); } -static void keyspan_close(struct usb_serial_port *port, struct file *filp) +static void keyspan_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int i; struct usb_serial *serial = port->serial; @@ -1311,15 +1305,15 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); - + p_priv->rts_state = 0; p_priv->dtr_state = 0; - + if (serial->dev) { keyspan_send_setup(port, 2); /* pilot-xfer seems to work best with this delay */ mdelay(100); - // keyspan_set_termios(port, NULL); + /* keyspan_set_termios(port, NULL); */ } /*while (p_priv->outcont_urb->status == -EINPROGRESS) { @@ -1338,11 +1332,11 @@ static void keyspan_close(struct usb_serial_port *port, struct file *filp) stop_urb(p_priv->out_urbs[i]); } } - port->tty = NULL; + port->port.tty = NULL; } - /* download the firmware to a pre-renumeration device */ -static int keyspan_fake_startup (struct usb_serial *serial) +/* download the firmware to a pre-renumeration device */ +static int keyspan_fake_startup(struct usb_serial *serial) { int response; const struct ihex_binrec *record; @@ -1352,10 +1346,11 @@ static int keyspan_fake_startup (struct usb_serial *serial) dbg("Keyspan startup version %04x product %04x", le16_to_cpu(serial->dev->descriptor.bcdDevice), le16_to_cpu(serial->dev->descriptor.idProduct)); - - if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) != 0x8000) { + + if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) + != 0x8000) { dbg("Firmware already loaded. Quitting."); - return(1); + return 1; } /* Select firmware image on the basis of idProduct */ @@ -1379,11 +1374,11 @@ static int keyspan_fake_startup (struct usb_serial *serial) case keyspan_usa19_pre_product_id: fw_name = "keyspan/usa19.fw"; break; - + case keyspan_usa19qi_pre_product_id: fw_name = "keyspan/usa19qi.fw"; break; - + case keyspan_mpr_pre_product_id: fw_name = "keyspan/mpr.fw"; break; @@ -1391,15 +1386,15 @@ static int keyspan_fake_startup (struct usb_serial *serial) case keyspan_usa19qw_pre_product_id: fw_name = "keyspan/usa19qw.fw"; break; - + case keyspan_usa18x_pre_product_id: fw_name = "keyspan/usa18x.fw"; break; - + case keyspan_usa19w_pre_product_id: fw_name = "keyspan/usa19w.fw"; break; - + case keyspan_usa49w_pre_product_id: fw_name = "keyspan/usa49w.fw"; break; @@ -1431,8 +1426,7 @@ static int keyspan_fake_startup (struct usb_serial *serial) (unsigned char *)record->data, be16_to_cpu(record->len), 0xa0); if (response < 0) { - dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan" - "firmware (%d %04X %p %d)\n", + dev_err(&serial->dev->dev, "ezusb_writememory failed for Keyspan firmware (%d %04X %p %d)\n", response, be32_to_cpu(record->addr), record->data, be16_to_cpu(record->len)); break; @@ -1445,7 +1439,7 @@ static int keyspan_fake_startup (struct usb_serial *serial) response = ezusb_set_reset(serial, 0); /* we don't want this device to have a driver assigned to it. */ - return (1); + return 1; } /* Helper functions used by keyspan_setup_urbs */ @@ -1467,7 +1461,7 @@ static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *se return NULL; } -static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, +static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, int dir, void *ctx, char *buf, int len, void (*callback)(struct urb *)) { @@ -1478,10 +1472,10 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, if (endpoint == -1) return NULL; /* endpoint not needed */ - dbg ("%s - alloc for endpoint %d.", __func__, endpoint); + dbg("%s - alloc for endpoint %d.", __func__, endpoint); urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { - dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint); + dbg("%s - alloc for endpoint %d failed.", __func__, endpoint); return NULL; } @@ -1554,7 +1548,7 @@ static struct callbacks { }, { /* msg_usa90 callbacks */ .instat_callback = usa90_instat_callback, - .glocont_callback = usa28_glocont_callback, + .glocont_callback = usa28_glocont_callback, .indat_callback = usa90_indat_callback, .outdat_callback = usa2x_outdat_callback, .inack_callback = usa28_inack_callback, @@ -1582,16 +1576,16 @@ static void keyspan_setup_urbs(struct usb_serial *serial) struct callbacks *cback; int endp; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; - /* Setup values for the various callback routines */ + /* Setup values for the various callback routines */ cback = &keyspan_callbacks[d_details->msg_format]; - /* Allocate and set up urbs for each one that is in use, - starting with instat endpoints */ + /* Allocate and set up urbs for each one that is in use, + starting with instat endpoints */ s_priv->instat_urb = keyspan_setup_urb (serial, d_details->instat_endpoint, USB_DIR_IN, serial, s_priv->instat_buf, INSTAT_BUFLEN, @@ -1607,8 +1601,8 @@ static void keyspan_setup_urbs(struct usb_serial *serial) serial, s_priv->glocont_buf, GLOCONT_BUFLEN, cback->glocont_callback); - /* Setup endpoints for each port specific thing */ - for (i = 0; i < d_details->num_ports; i ++) { + /* Setup endpoints for each port specific thing */ + for (i = 0; i < d_details->num_ports; i++) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); @@ -1644,8 +1638,7 @@ static void keyspan_setup_urbs(struct usb_serial *serial) (serial, d_details->outcont_endpoints[i], USB_DIR_OUT, port, p_priv->outcont_buffer, 64, cback->outcont_callback); - } - + } } /* usa19 function doesn't require prescaler */ @@ -1653,46 +1646,39 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ - div, /* divisor */ + div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - - dbg ("%s - %d.", __func__, baud_rate); - - /* prevent divide by zero... */ - if( (b16 = (baud_rate * 16L)) == 0) { - return (KEYSPAN_INVALID_BAUD_RATE); - } - /* Any "standard" rate over 57k6 is marginal on the USA-19 - as we run out of divisor resolution. */ - if (baud_rate > 57600) { - return (KEYSPAN_INVALID_BAUD_RATE); - } - - /* calculate the divisor and the counter (its inverse) */ - if( (div = (baudclk / b16)) == 0) { - return (KEYSPAN_INVALID_BAUD_RATE); - } - else { + dbg("%s - %d.", __func__, baud_rate); + + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + /* Any "standard" rate over 57k6 is marginal on the USA-19 + as we run out of divisor resolution. */ + if (baud_rate > 57600) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else cnt = 0 - div; - } - if(div > 0xffff) { - return (KEYSPAN_INVALID_BAUD_RATE); - } + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; - /* return the counter values if non-null */ - if (rate_low) { + /* return the counter values if non-null */ + if (rate_low) *rate_low = (u8) (cnt & 0xff); - } - if (rate_hi) { + if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); - } - if (rate_low && rate_hi) { - dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); - } - - return (KEYSPAN_BAUD_RATE_OK); + if (rate_low && rate_hi) + dbg("%s - %d %02x %02x.", + __func__, baud_rate, *rate_hi, *rate_low); + return KEYSPAN_BAUD_RATE_OK; } /* usa19hs function doesn't require prescaler */ @@ -1700,34 +1686,35 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ - div; /* divisor */ - - dbg ("%s - %d.", __func__, baud_rate); + div; /* divisor */ - /* prevent divide by zero... */ - if( (b16 = (baud_rate * 16L)) == 0) - return (KEYSPAN_INVALID_BAUD_RATE); - + dbg("%s - %d.", __func__, baud_rate); + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; - /* calculate the divisor */ - if( (div = (baudclk / b16)) == 0) - return (KEYSPAN_INVALID_BAUD_RATE); + /* calculate the divisor */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; - if(div > 0xffff) - return (KEYSPAN_INVALID_BAUD_RATE); + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; - /* return the counter values if non-null */ - if (rate_low) + /* return the counter values if non-null */ + if (rate_low) *rate_low = (u8) (div & 0xff); - - if (rate_hi) + + if (rate_hi) *rate_hi = (u8) ((div >> 8) & 0xff); - - if (rate_low && rate_hi) - dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low); - - return (KEYSPAN_BAUD_RATE_OK); + + if (rate_low && rate_hi) + dbg("%s - %d %02x %02x.", + __func__, baud_rate, *rate_hi, *rate_low); + + return KEYSPAN_BAUD_RATE_OK; } static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, @@ -1735,64 +1722,61 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, { u32 b16, /* baud rate times 16 (actual rate used internally) */ clk, /* clock with 13/8 prescaler */ - div, /* divisor using 13/8 prescaler */ + div, /* divisor using 13/8 prescaler */ res, /* resulting baud rate using 13/8 prescaler */ diff, /* error using 13/8 prescaler */ smallest_diff; u8 best_prescaler; int i; - dbg ("%s - %d.", __func__, baud_rate); + dbg("%s - %d.", __func__, baud_rate); - /* prevent divide by zero */ - if( (b16 = baud_rate * 16L) == 0) { - return (KEYSPAN_INVALID_BAUD_RATE); - } + /* prevent divide by zero */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; - /* Calculate prescaler by trying them all and looking - for best fit */ - - /* start with largest possible difference */ + /* Calculate prescaler by trying them all and looking + for best fit */ + + /* start with largest possible difference */ smallest_diff = 0xffffffff; /* 0 is an invalid prescaler, used as a flag */ best_prescaler = 0; - for(i = 8; i <= 0xff; ++i) { + for (i = 8; i <= 0xff; ++i) { clk = (baudclk * 8) / (u32) i; - - if( (div = clk / b16) == 0) { + + div = clk / b16; + if (div == 0) continue; - } res = clk / div; - diff= (res > b16) ? (res-b16) : (b16-res); + diff = (res > b16) ? (res-b16) : (b16-res); - if(diff < smallest_diff) { + if (diff < smallest_diff) { best_prescaler = i; smallest_diff = diff; } } - if(best_prescaler == 0) { - return (KEYSPAN_INVALID_BAUD_RATE); - } + if (best_prescaler == 0) + return KEYSPAN_INVALID_BAUD_RATE; clk = (baudclk * 8) / (u32) best_prescaler; div = clk / b16; - /* return the divisor and prescaler if non-null */ - if (rate_low) { + /* return the divisor and prescaler if non-null */ + if (rate_low) *rate_low = (u8) (div & 0xff); - } - if (rate_hi) { + if (rate_hi) *rate_hi = (u8) ((div >> 8) & 0xff); - } if (prescaler) { *prescaler = best_prescaler; /* dbg("%s - %d %d", __func__, *prescaler, div); */ } - return (KEYSPAN_BAUD_RATE_OK); + return KEYSPAN_BAUD_RATE_OK; } /* USA-28 supports different maximum baud rates on each port */ @@ -1800,57 +1784,51 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum) { u32 b16, /* baud rate times 16 (actual rate used internally) */ - div, /* divisor */ + div, /* divisor */ cnt; /* inverse of divisor (programmed into 8051) */ - dbg ("%s - %d.", __func__, baud_rate); + dbg("%s - %d.", __func__, baud_rate); /* prevent divide by zero */ - if ((b16 = baud_rate * 16L) == 0) - return (KEYSPAN_INVALID_BAUD_RATE); - - /* calculate the divisor and the counter (its inverse) */ - if ((div = (KEYSPAN_USA28_BAUDCLK / b16)) == 0) { - return (KEYSPAN_INVALID_BAUD_RATE); - } - else { + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = KEYSPAN_USA28_BAUDCLK / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else cnt = 0 - div; - } - /* check for out of range, based on portnum, - and return result */ - if(portnum == 0) { - if(div > 0xffff) - return (KEYSPAN_INVALID_BAUD_RATE); - } - else { - if(portnum == 1) { - if(div > 0xff) { - return (KEYSPAN_INVALID_BAUD_RATE); - } - } - else { - return (KEYSPAN_INVALID_BAUD_RATE); - } + /* check for out of range, based on portnum, + and return result */ + if (portnum == 0) { + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + } else { + if (portnum == 1) { + if (div > 0xff) + return KEYSPAN_INVALID_BAUD_RATE; + } else + return KEYSPAN_INVALID_BAUD_RATE; } /* return the counter values if not NULL (port 1 will ignore retHi) */ - if (rate_low) { + if (rate_low) *rate_low = (u8) (cnt & 0xff); - } - if (rate_hi) { + if (rate_hi) *rate_hi = (u8) ((cnt >> 8) & 0xff); - } - dbg ("%s - %d OK.", __func__, baud_rate); - return (KEYSPAN_BAUD_RATE_OK); + dbg("%s - %d OK.", __func__, baud_rate); + return KEYSPAN_BAUD_RATE_OK; } static int keyspan_usa26_send_setup(struct usb_serial *serial, struct usb_serial_port *port, int reset_port) { - struct keyspan_usa26_portControlMessage msg; + struct keyspan_usa26_portControlMessage msg; struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; @@ -1858,7 +1836,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct urb *this_urb; int device_port, err; - dbg ("%s reset=%d", __func__, reset_port); + dbg("%s reset=%d", __func__, reset_port); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1881,22 +1859,22 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __func__); */ + /* dbg("%s - already writing", __func__); */ mdelay(5); - return(-1); + return -1; } - memset(&msg, 0, sizeof (struct keyspan_usa26_portControlMessage)); - - /* Only set baud rate if it's changed */ + memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage)); + + /* Only set baud rate if it's changed */ if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, - p_priv->baud); + &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dbg("%s - Invalid baud rate %d requested, using 9600.", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -1922,7 +1900,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, if (p_priv->cflag & PARENB) { /* note USA_PARITY_NONE == 0 */ msg.lcr |= (p_priv->cflag & PARODD)? - USA_PARITY_ODD: USA_PARITY_EVEN; + USA_PARITY_ODD : USA_PARITY_EVEN; } msg.setLcr = 0xff; @@ -1963,7 +1941,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, /* Sending intermediate configs */ else { - msg._txOn = (! p_priv->break_on); + msg._txOn = (!p_priv->break_on); msg._txOff = 0; msg.txFlush = 0; msg.txBreak = (p_priv->break_on); @@ -1975,23 +1953,23 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, msg.resetDataToggle = 0x0; } - /* Do handshaking outputs */ + /* Do handshaking outputs */ msg.setTxTriState_setRts = 0xff; msg.txTriState_rts = p_priv->rts_state; msg.setHskoa_setDtr = 0xff; msg.hskoa_dtr = p_priv->dtr_state; - + p_priv->resend_cont = 0; - memcpy (this_urb->transfer_buffer, &msg, sizeof(msg)); - + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + /* send the data out the device on control endpoint */ this_urb->transfer_buffer_length = sizeof(msg); this_urb->dev = serial->dev; - if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); - } #if 0 else { dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__ @@ -2007,14 +1985,14 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, struct usb_serial_port *port, int reset_port) { - struct keyspan_usa28_portControlMessage msg; + struct keyspan_usa28_portControlMessage msg; struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct urb *this_urb; int device_port, err; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2022,7 +2000,8 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, device_port = port->number - port->serial->minor; /* only do something if we have a bulk out endpoint */ - if ((this_urb = p_priv->outcont_urb) == NULL) { + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { dbg("%s - oops no urb.", __func__); return -1; } @@ -2032,17 +2011,18 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __func__); + dbg("%s already writing", __func__); mdelay(5); - return(-1); + return -1; } - memset(&msg, 0, sizeof (struct keyspan_usa28_portControlMessage)); + memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); msg.setBaudRate = 1; if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, - &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud); + &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dbg("%s - Invalid baud rate requested %d.", + __func__, p_priv->baud); msg.baudLo = 0xff; msg.baudHi = 0xb2; /* Values for 9600 baud */ } @@ -2053,7 +2033,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, msg.ctsFlowControl = (p_priv->flow_control == flow_cts); msg.xonFlowControl = 0; - /* Do handshaking outputs, DTR is inverted relative to RTS */ + /* Do handshaking outputs, DTR is inverted relative to RTS */ msg.rts = p_priv->rts_state; msg.dtr = p_priv->dtr_state; @@ -2095,7 +2075,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, } /* Sending intermediate configs */ else { - msg._txOn = (! p_priv->break_on); + msg._txOn = (!p_priv->break_on); msg._txOff = 0; msg.txFlush = 0; msg.txForceXoff = 0; @@ -2109,15 +2089,15 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, } p_priv->resend_cont = 0; - memcpy (this_urb->transfer_buffer, &msg, sizeof(msg)); + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); /* send the data out the device on control endpoint */ this_urb->transfer_buffer_length = sizeof(msg); this_urb->dev = serial->dev; - if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) dbg("%s - usb_submit_urb(setup) failed", __func__); - } #if 0 else { dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__, @@ -2140,7 +2120,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2151,7 +2131,9 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Work out which port within the device is being setup */ device_port = port->number - port->serial->minor; - dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port); + dbg("%s - endpoint %d port %d (%d)", + __func__, usb_pipeendpoint(this_urb->pipe), + port->number, device_port); /* Make sure we have an urb then send the message */ if (this_urb == NULL) { @@ -2165,30 +2147,30 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __func__); */ + /* dbg("%s - already writing", __func__); */ mdelay(5); - return(-1); + return -1; } - memset(&msg, 0, sizeof (struct keyspan_usa49_portControlMessage)); + memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); /*msg.portNumber = port->number;*/ msg.portNumber = device_port; - - /* Only set baud rate if it's changed */ + + /* Only set baud rate if it's changed */ if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0xff; if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, - p_priv->baud); + &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dbg("%s - Invalid baud rate %d requested, using 9600.", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; } - //msg.setPrescaler = 0xff; + /* msg.setPrescaler = 0xff; */ } msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1; @@ -2209,19 +2191,19 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, if (p_priv->cflag & PARENB) { /* note USA_PARITY_NONE == 0 */ msg.lcr |= (p_priv->cflag & PARODD)? - USA_PARITY_ODD: USA_PARITY_EVEN; + USA_PARITY_ODD : USA_PARITY_EVEN; } msg.setLcr = 0xff; msg.ctsFlowControl = (p_priv->flow_control == flow_cts); msg.xonFlowControl = 0; msg.setFlowControl = 0xff; - + msg.forwardingLength = 16; msg.xonChar = 17; msg.xoffChar = 19; - /* Opening port */ + /* Opening port */ if (reset_port == 1) { msg._txOn = 1; msg._txOff = 0; @@ -2253,7 +2235,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, } /* Sending intermediate configs */ else { - msg._txOn = (! p_priv->break_on); + msg._txOn = (!p_priv->break_on); msg._txOff = 0; msg.txFlush = 0; msg.txBreak = (p_priv->break_on); @@ -2267,16 +2249,17 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, msg.disablePort = 0; } - /* Do handshaking outputs */ + /* Do handshaking outputs */ msg.setRts = 0xff; msg.rts = p_priv->rts_state; msg.setDtr = 0xff; msg.dtr = p_priv->dtr_state; - + p_priv->resend_cont = 0; - /* if the device is a 49wg, we send control message on usb control EP 0 */ + /* if the device is a 49wg, we send control message on usb + control EP 0 */ if (d_details->product_id == keyspan_usa49wg_product_id) { dr = (void *)(s_priv->ctrl_buf); @@ -2286,23 +2269,24 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, dr->wIndex = 0; dr->wLength = cpu_to_le16(sizeof(msg)); - memcpy (s_priv->glocont_buf, &msg, sizeof(msg)); + memcpy(s_priv->glocont_buf, &msg, sizeof(msg)); - usb_fill_control_urb(this_urb, serial->dev, usb_sndctrlpipe(serial->dev, 0), - (unsigned char *)dr, s_priv->glocont_buf, sizeof(msg), - usa49_glocont_callback, serial); + usb_fill_control_urb(this_urb, serial->dev, + usb_sndctrlpipe(serial->dev, 0), + (unsigned char *)dr, s_priv->glocont_buf, + sizeof(msg), usa49_glocont_callback, serial); } else { memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); - + /* send the data out the device on control endpoint */ this_urb->transfer_buffer_length = sizeof(msg); this_urb->dev = serial->dev; } - if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); - } #if 0 else { dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__, @@ -2318,7 +2302,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, struct usb_serial_port *port, int reset_port) { - struct keyspan_usa90_portControlMessage msg; + struct keyspan_usa90_portControlMessage msg; struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; @@ -2326,14 +2310,15 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, int err; u8 prescaler; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); d_details = s_priv->device_details; /* only do something if we have a bulk out endpoint */ - if ((this_urb = p_priv->outcont_urb) == NULL) { + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { dbg("%s - oops no urb.", __func__); return -1; } @@ -2343,24 +2328,24 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - dbg ("%s already writing", __func__); + dbg("%s already writing", __func__); mdelay(5); - return(-1); + return -1; } - memset(&msg, 0, sizeof (struct keyspan_usa90_portControlMessage)); + memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage)); - /* Only set baud rate if it's changed */ + /* Only set baud rate if it's changed */ if (p_priv->old_baud != p_priv->baud) { p_priv->old_baud = p_priv->baud; msg.setClocking = 0x01; if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, - p_priv->baud); + &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dbg("%s - Invalid baud rate %d requested, using 9600.", + __func__, p_priv->baud); p_priv->baud = 9600; - d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, + d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk, &msg.baudHi, &msg.baudLo, &prescaler, 0); } msg.setRxMode = 1; @@ -2368,13 +2353,10 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, } /* modes must always be correctly specified */ - if (p_priv->baud > 57600) - { + if (p_priv->baud > 57600) { msg.rxMode = RXMODE_DMA; msg.txMode = TXMODE_DMA; - } - else - { + } else { msg.rxMode = RXMODE_BYHAND; msg.txMode = TXMODE_BYHAND; } @@ -2397,7 +2379,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, if (p_priv->cflag & PARENB) { /* note USA_PARITY_NONE == 0 */ msg.lcr |= (p_priv->cflag & PARODD)? - USA_PARITY_ODD: USA_PARITY_EVEN; + USA_PARITY_ODD : USA_PARITY_EVEN; } if (p_priv->old_cflag != p_priv->cflag) { p_priv->old_cflag = p_priv->cflag; @@ -2408,47 +2390,46 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial, msg.txFlowControl = TXFLOW_CTS; msg.setTxFlowControl = 0x01; msg.setRxFlowControl = 0x01; - + msg.rxForwardingLength = 16; - msg.rxForwardingTimeout = 16; + msg.rxForwardingTimeout = 16; msg.txAckSetting = 0; msg.xonChar = 17; msg.xoffChar = 19; - /* Opening port */ + /* Opening port */ if (reset_port == 1) { msg.portEnabled = 1; msg.rxFlush = 1; msg.txBreak = (p_priv->break_on); } /* Closing port */ - else if (reset_port == 2) { + else if (reset_port == 2) msg.portEnabled = 0; - } /* Sending intermediate configs */ else { - if (port->open_count) + if (port->port.count) msg.portEnabled = 1; msg.txBreak = (p_priv->break_on); } - /* Do handshaking outputs */ + /* Do handshaking outputs */ msg.setRts = 0x01; msg.rts = p_priv->rts_state; msg.setDtr = 0x01; msg.dtr = p_priv->dtr_state; - + p_priv->resend_cont = 0; - memcpy (this_urb->transfer_buffer, &msg, sizeof(msg)); - + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + /* send the data out the device on control endpoint */ this_urb->transfer_buffer_length = sizeof(msg); this_urb->dev = serial->dev; - if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) { + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err); - } return 0; } @@ -2463,7 +2444,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, struct urb *this_urb; int err, device_port; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -2486,9 +2467,9 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if ((reset_port + 1) > p_priv->resend_cont) p_priv->resend_cont = reset_port + 1; if (this_urb->status == -EINPROGRESS) { - /* dbg ("%s - already writing", __func__); */ + /* dbg("%s - already writing", __func__); */ mdelay(5); - return(-1); + return -1; } memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage)); @@ -2501,9 +2482,9 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, msg.setClocking = 0xff; if (d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk, &msg.baudHi, - &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) { - dbg("%s - Invalid baud rate %d requested, using 9600.", __func__, - p_priv->baud); + &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dbg("%s - Invalid baud rate %d requested, using 9600.", + __func__, p_priv->baud); msg.baudLo = 0; msg.baudHi = 125; /* Values for 9600 baud */ msg.prescaler = 10; @@ -2529,7 +2510,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, if (p_priv->cflag & PARENB) { /* note USA_PARITY_NONE == 0 */ msg.lcr |= (p_priv->cflag & PARODD)? - USA_PARITY_ODD: USA_PARITY_EVEN; + USA_PARITY_ODD : USA_PARITY_EVEN; } msg.setLcr = 0xff; @@ -2566,7 +2547,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial, msg.resetDataToggle = 0; } else { /* Sending intermediate configs */ - msg._txOn = (! p_priv->break_on); + msg._txOn = (!p_priv->break_on); msg._txOff = 0; msg.txFlush = 0; msg.txBreak = (p_priv->break_on); @@ -2606,7 +2587,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) struct keyspan_serial_private *s_priv; const struct keyspan_device_details *d_details; - dbg ("%s", __func__); + dbg("%s", __func__); s_priv = usb_get_serial_data(serial); d_details = s_priv->device_details; @@ -2633,7 +2614,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) /* Gets called by the "real" driver (ie once firmware is loaded and renumeration has taken place. */ -static int keyspan_startup (struct usb_serial *serial) +static int keyspan_startup(struct usb_serial *serial) { int i, err; struct usb_serial_port *port; @@ -2644,17 +2625,20 @@ static int keyspan_startup (struct usb_serial *serial) dbg("%s", __func__); for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) - if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) + if (d_details->product_id == + le16_to_cpu(serial->dev->descriptor.idProduct)) break; if (d_details == NULL) { - dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); + dev_err(&serial->dev->dev, "%s - unknown product id %x\n", + __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); return 1; } /* Setup private data for serial driver */ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); if (!s_priv) { - dbg("%s - kmalloc for keyspan_serial_private failed.", __func__); + dbg("%s - kmalloc for keyspan_serial_private failed.", + __func__); return -ENOMEM; } @@ -2664,10 +2648,11 @@ static int keyspan_startup (struct usb_serial *serial) /* Now setup per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; - p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL); + p_priv = kzalloc(sizeof(struct keyspan_port_private), + GFP_KERNEL); if (!p_priv) { dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i); - return (1); + return 1; } p_priv->device_details = d_details; usb_set_serial_port_data(port, p_priv); @@ -2689,11 +2674,11 @@ static int keyspan_startup (struct usb_serial *serial) dbg("%s - submit indat urb failed %d", __func__, err); } - + return 0; } -static void keyspan_shutdown (struct usb_serial *serial) +static void keyspan_shutdown(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; @@ -2745,8 +2730,8 @@ static void keyspan_shutdown (struct usb_serial *serial) } } -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("keyspan/usa28.fw"); diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index b52fb657a24..38b4582e073 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -35,17 +35,18 @@ /* Function prototypes for Keyspan serial converter */ -static int keyspan_open (struct usb_serial_port *port, +static int keyspan_open (struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); -static void keyspan_close (struct usb_serial_port *port, +static void keyspan_close (struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); static int keyspan_startup (struct usb_serial *serial); static void keyspan_shutdown (struct usb_serial *serial); -static void keyspan_rx_throttle (struct usb_serial_port *port); -static void keyspan_rx_unthrottle (struct usb_serial_port *port); -static int keyspan_write_room (struct usb_serial_port *port); +static int keyspan_write_room (struct tty_struct *tty); -static int keyspan_write (struct usb_serial_port *port, +static int keyspan_write (struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); @@ -53,18 +54,14 @@ static void keyspan_send_setup (struct usb_serial_port *port, int reset_port); -static int keyspan_chars_in_buffer (struct usb_serial_port *port); -static int keyspan_ioctl (struct usb_serial_port *port, - struct file *file, - unsigned int cmd, - unsigned long arg); -static void keyspan_set_termios (struct usb_serial_port *port, +static void keyspan_set_termios (struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); -static void keyspan_break_ctl (struct usb_serial_port *port, +static void keyspan_break_ctl (struct tty_struct *tty, int break_state); -static int keyspan_tiocmget (struct usb_serial_port *port, +static int keyspan_tiocmget (struct tty_struct *tty, struct file *file); -static int keyspan_tiocmset (struct usb_serial_port *port, +static int keyspan_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); @@ -138,7 +135,8 @@ static int keyspan_usa67_send_setup (struct usb_serial *serial, /* Product IDs post-renumeration. Note that the 28x and 28xb have the same id's post-renumeration but behave identically - so it's not an issue. */ + so it's not an issue. As such, the 28xb is not listed in any + of the device tables. */ #define keyspan_usa18x_product_id 0x0112 #define keyspan_usa19_product_id 0x0107 #define keyspan_usa19qi_product_id 0x010c @@ -482,7 +480,6 @@ static struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, @@ -532,7 +529,6 @@ static struct usb_device_id keyspan_2port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { } /* Terminating entry */ }; @@ -568,10 +564,6 @@ static struct usb_serial_driver keyspan_1port_device = { .close = keyspan_close, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, @@ -592,10 +584,6 @@ static struct usb_serial_driver keyspan_2port_device = { .close = keyspan_close, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, @@ -616,10 +604,6 @@ static struct usb_serial_driver keyspan_4port_device = { .close = keyspan_close, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 644a1eaaa37..040040a267d 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -10,8 +10,9 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * * (09/07/2001) gkh * cleaned up the Xircom support. Added ids for Entregra device which is * the same as the Xircom device. Enabled the code to be compiled for @@ -21,23 +22,24 @@ * support for Xircom PGSDB9 * * (05/31/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. - * + * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (08/28/2000) gkh * Added locks for SMP safeness. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more * than once. - * + * * (07/20/2000) borchers * - keyspan_pda_write no longer sleeps if it is called on interrupt time; * PPP and the line discipline with stty echo on can call write on @@ -55,14 +57,14 @@ * than done directly from the callback to avoid the race in write_chan * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the * urb status is -EINPROGRESS, meaning it cannot write at the moment - * + * * (07/19/2000) gkh * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * * (03/26/2000) gkh * Split driver up into device specific pieces. - * + * */ @@ -78,7 +80,7 @@ #include <linux/workqueue.h> #include <linux/firmware.h> #include <linux/ihex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -135,7 +137,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver keyspan_pda_driver = { .name = "keyspan_pda", @@ -159,9 +161,9 @@ static struct usb_device_id id_table_fake [] = { #ifdef XIRCOM static struct usb_device_id id_table_fake_xircom [] = { - { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, - { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, - { } + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, + { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) }, + { } }; #endif @@ -171,7 +173,7 @@ static void keyspan_pda_wakeup_write(struct work_struct *work) container_of(work, struct keyspan_pda_private, wakeup_work); struct usb_serial_port *port = priv->port; - tty_wakeup(port->tty); + tty_wakeup(port->port.tty); } static void keyspan_pda_request_unthrottle(struct work_struct *work) @@ -184,7 +186,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) dbg(" request_unthrottle"); /* ask the device to tell us when the tx buffer becomes sufficiently empty */ - result = usb_control_msg(serial->dev, + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 7, /* request_unthrottle */ USB_TYPE_VENDOR | USB_RECIP_INTERFACE @@ -195,17 +197,16 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", + dbg("%s - error %d from usb_control_msg", __func__, result); } -static void keyspan_pda_rx_interrupt (struct urb *urb) +static void keyspan_pda_rx_interrupt(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; unsigned char *data = urb->transfer_buffer; - int i; int retval; int status = urb->status; struct keyspan_pda_private *priv; @@ -228,14 +229,13 @@ static void keyspan_pda_rx_interrupt (struct urb *urb) goto exit; } - /* see if the message is data or a status interrupt */ + /* see if the message is data or a status interrupt */ switch (data[0]) { case 0: /* rest of message is rx data */ if (urb->actual_length) { - for (i = 1; i < urb->actual_length ; ++i) { - tty_insert_flip_char(tty, data[i], 0); - } + tty_insert_flip_string(tty, data + 1, + urb->actual_length - 1); tty_flip_buffer_push(tty); } break; @@ -259,14 +259,14 @@ static void keyspan_pda_rx_interrupt (struct urb *urb) } exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", + err("%s - usb_submit_urb failed with result %d", __func__, retval); } -static void keyspan_pda_rx_throttle (struct usb_serial_port *port) +static void keyspan_pda_rx_throttle(struct tty_struct *tty) { /* stop receiving characters. We just turn off the URB request, and let chars pile up in the device. If we're doing hardware @@ -274,14 +274,15 @@ static void keyspan_pda_rx_throttle (struct usb_serial_port *port) fills up. If we're doing XON/XOFF, this would be a good time to send an XOFF, although it might make sense to foist that off upon the device too. */ - + struct usb_serial_port *port = tty->driver_data; dbg("keyspan_pda_rx_throttle port %d", port->number); usb_kill_urb(port->interrupt_in_urb); } -static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port) +static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; /* just restart the receive interrupt URB */ dbg("keyspan_pda_rx_unthrottle port %d", port->number); port->interrupt_in_urb->dev = port->serial->dev; @@ -291,32 +292,52 @@ static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port) } -static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud) +static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud) { int rc; int bindex; - switch(baud) { - case 110: bindex = 0; break; - case 300: bindex = 1; break; - case 1200: bindex = 2; break; - case 2400: bindex = 3; break; - case 4800: bindex = 4; break; - case 9600: bindex = 5; break; - case 19200: bindex = 6; break; - case 38400: bindex = 7; break; - case 57600: bindex = 8; break; - case 115200: bindex = 9; break; - default: - bindex = 5; /* Default to 9600 */ - baud = 9600; + switch (baud) { + case 110: + bindex = 0; + break; + case 300: + bindex = 1; + break; + case 1200: + bindex = 2; + break; + case 2400: + bindex = 3; + break; + case 4800: + bindex = 4; + break; + case 9600: + bindex = 5; + break; + case 19200: + bindex = 6; + break; + case 38400: + bindex = 7; + break; + case 57600: + bindex = 8; + break; + case 115200: + bindex = 9; + break; + default: + bindex = 5; /* Default to 9600 */ + baud = 9600; } /* rather than figure out how to sleep while waiting for this to complete, I just use the "legacy" API. */ rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0, /* set baud */ - USB_TYPE_VENDOR + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, /* type */ bindex, /* value */ @@ -330,8 +351,9 @@ static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud) } -static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state) +static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int value; int result; @@ -341,11 +363,11 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state else value = 0; /* clear break */ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - 4, /* set break */ - USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - value, 0, NULL, 0, 2000); + 4, /* set break */ + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + value, 0, NULL, 0, 2000); if (result < 0) - dbg("%s - error %d from usb_control_msg", + dbg("%s - error %d from usb_control_msg", __func__, result); /* there is something funky about this.. the TCSBRK that 'cu' performs ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 @@ -354,8 +376,8 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state } -static void keyspan_pda_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void keyspan_pda_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; speed_t speed; @@ -380,7 +402,7 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port, For now, just do baud. */ - speed = tty_get_baud_rate(port->tty); + speed = tty_get_baud_rate(tty); speed = keyspan_pda_setbaud(serial, speed); if (speed == 0) { @@ -390,8 +412,8 @@ static void keyspan_pda_set_termios (struct usb_serial_port *port, } /* Only speed can change so copy the old h/w parameters then encode the new speed */ - tty_termios_copy_hw(port->tty->termios, old_termios); - tty_encode_baud_rate(port->tty, speed, speed); + tty_termios_copy_hw(tty->termios, old_termios); + tty_encode_baud_rate(tty, speed, speed); } @@ -408,7 +430,7 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial, 3, /* get pins */ USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, 0, 0, &data, 1, 2000); - if (rc > 0) + if (rc >= 0) *value = data; return rc; } @@ -425,8 +447,9 @@ static int keyspan_pda_set_modem_info(struct usb_serial *serial, return rc; } -static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file) +static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int rc; unsigned char status; @@ -445,9 +468,10 @@ static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file) return value; } -static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file, +static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; int rc; unsigned char status; @@ -469,23 +493,8 @@ static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file, return rc; } -static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg) -{ - switch (cmd) { - case TIOCMIWAIT: - /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ - /* TODO */ - case TIOCGICOUNT: - /* return count of modemline transitions */ - return 0; /* TODO */ - } - - return -ENOIOCTLCMD; -} - -static int keyspan_pda_write(struct usb_serial_port *port, - const unsigned char *buf, int count) +static int keyspan_pda_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; int request_unthrottle = 0; @@ -501,10 +510,10 @@ static int keyspan_pda_write(struct usb_serial_port *port, select() or poll() too) until we receive that unthrottle interrupt. Block if we can't write anything at all, otherwise write as much as we can. */ - dbg("keyspan_pda_write(%d)",count); + dbg("keyspan_pda_write(%d)", count); if (count == 0) { dbg(" write request of 0 bytes"); - return (0); + return 0; } /* we might block because of: @@ -531,7 +540,7 @@ static int keyspan_pda_write(struct usb_serial_port *port, scheduler time, since usb_control_msg() sleeps. */ if (count > priv->tx_room && !in_interrupt()) { unsigned char room; - rc = usb_control_msg(serial->dev, + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 6, /* write_room */ USB_TYPE_VENDOR | USB_RECIP_INTERFACE @@ -562,7 +571,7 @@ static int keyspan_pda_write(struct usb_serial_port *port, if (count) { /* now transfer data */ - memcpy (port->write_urb->transfer_buffer, buf, count); + memcpy(port->write_urb->transfer_buffer, buf, count); /* send the data out the bulk port */ port->write_urb->transfer_buffer_length = count; @@ -574,8 +583,7 @@ static int keyspan_pda_write(struct usb_serial_port *port, dbg(" usb_submit_urb(write bulk) failed"); goto exit; } - } - else { + } else { /* There wasn't any room left, so we are throttled until the buffer empties a bit */ request_unthrottle = 1; @@ -594,7 +602,7 @@ exit: } -static void keyspan_pda_write_bulk_callback (struct urb *urb) +static void keyspan_pda_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct keyspan_pda_private *priv; @@ -607,22 +615,21 @@ static void keyspan_pda_write_bulk_callback (struct urb *urb) } -static int keyspan_pda_write_room (struct usb_serial_port *port) +static int keyspan_pda_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct keyspan_pda_private *priv; - priv = usb_get_serial_port_data(port); - /* used by n_tty.c for processing of tabs and such. Giving it our conservative guess is probably good enough, but needs testing by running a console through the device. */ - - return (priv->tx_room); + return priv->tx_room; } -static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port) +static int keyspan_pda_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct keyspan_pda_private *priv; unsigned long flags; int ret = 0; @@ -640,7 +647,8 @@ static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port) } -static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp) +static int keyspan_pda_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; unsigned char room; @@ -672,8 +680,8 @@ static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp) /* the normal serial device seems to always turn on DTR and RTS here, so do the same */ - if (port->tty->termios->c_cflag & CBAUD) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) ); + if (tty && (tty->termios->c_cflag & CBAUD)) + keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2)); else keyspan_pda_set_modem_info(serial, 0); @@ -690,13 +698,15 @@ error: } -static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp) +static void keyspan_pda_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; if (serial->dev) { - /* the normal serial device seems to always shut off DTR and RTS now */ - if (port->tty->termios->c_cflag & HUPCL) + /* the normal serial device seems to always shut + off DTR and RTS now */ + if (tty->termios->c_cflag & HUPCL) keyspan_pda_set_modem_info(serial, 0); /* shutdown our bulk reads and writes */ @@ -707,7 +717,7 @@ static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp) /* download the firmware to a "fake" device (pre-renumeration) */ -static int keyspan_pda_fake_startup (struct usb_serial *serial) +static int keyspan_pda_fake_startup(struct usb_serial *serial) { int response; const char *fw_name; @@ -756,10 +766,10 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial) response = ezusb_set_reset(serial, 0); /* we want this device to fail to have a driver assigned to it. */ - return (1); + return 1; } -static int keyspan_pda_startup (struct usb_serial *serial) +static int keyspan_pda_startup(struct usb_serial *serial) { struct keyspan_pda_private *priv; @@ -769,20 +779,20 @@ static int keyspan_pda_startup (struct usb_serial *serial) priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL); if (!priv) - return (1); /* error */ + return 1; /* error */ usb_set_serial_port_data(serial->port[0], priv); init_waitqueue_head(&serial->port[0]->write_wait); INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write); INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle); priv->serial = serial; priv->port = serial->port[0]; - return (0); + return 0; } -static void keyspan_pda_shutdown (struct usb_serial *serial) +static void keyspan_pda_shutdown(struct usb_serial *serial) { dbg("%s", __func__); - + kfree(usb_get_serial_port_data(serial->port[0])); } @@ -832,7 +842,6 @@ static struct usb_serial_driver keyspan_pda_device = { .chars_in_buffer = keyspan_pda_chars_in_buffer, .throttle = keyspan_pda_rx_throttle, .unthrottle = keyspan_pda_rx_unthrottle, - .ioctl = keyspan_pda_ioctl, .set_termios = keyspan_pda_set_termios, .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, @@ -842,7 +851,7 @@ static struct usb_serial_driver keyspan_pda_device = { }; -static int __init keyspan_pda_init (void) +static int __init keyspan_pda_init(void) { int retval; retval = usb_serial_register(&keyspan_pda_device); @@ -863,7 +872,7 @@ static int __init keyspan_pda_init (void) goto failed_usb_register; info(DRIVER_DESC " " DRIVER_VERSION); return 0; -failed_usb_register: +failed_usb_register: #ifdef XIRCOM usb_serial_deregister(&xircom_pgs_fake_device); failed_xircom_register: @@ -880,15 +889,15 @@ failed_pda_register: } -static void __exit keyspan_pda_exit (void) +static void __exit keyspan_pda_exit(void) { - usb_deregister (&keyspan_pda_driver); - usb_serial_deregister (&keyspan_pda_device); + usb_deregister(&keyspan_pda_driver); + usb_serial_deregister(&keyspan_pda_device); #ifdef KEYSPAN - usb_serial_deregister (&keyspan_pda_fake_device); + usb_serial_deregister(&keyspan_pda_fake_device); #endif #ifdef XIRCOM - usb_serial_deregister (&xircom_pgs_fake_device); + usb_serial_deregister(&xircom_pgs_fake_device); #endif } @@ -896,8 +905,8 @@ static void __exit keyspan_pda_exit (void) module_init(keyspan_pda_init); module_exit(keyspan_pda_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index f328948d74e..b84dddc7112 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -15,12 +15,12 @@ * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided * information that was not already available. * - * It seems that KLSI bought some silicon-design information from ScanLogic, + * It seems that KLSI bought some silicon-design information from ScanLogic, * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. * KLSI has firmware available for their devices; it is probable that the * firmware differs from that used by KLSI in their products. If you have an - * original KLSI device and can provide some information on it, I would be - * most interested in adding support for it here. If you have any information + * original KLSI device and can provide some information on it, I would be + * most interested in adding support for it here. If you have any information * on the protocol used (or find errors in my reverse-engineered stuff), please * let me know. * @@ -40,7 +40,7 @@ * 0.2 - TIOCMGET works, so autopilot(1) can be used! * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l * - * The driver skeleton is mainly based on mct_u232.c and various other + * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. */ @@ -53,7 +53,7 @@ #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/unaligned.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -72,33 +72,25 @@ static int debug; /* * Function prototypes */ -static int klsi_105_startup (struct usb_serial *serial); -static void klsi_105_shutdown (struct usb_serial *serial); -static int klsi_105_open (struct usb_serial_port *port, - struct file *filp); -static void klsi_105_close (struct usb_serial_port *port, - struct file *filp); -static int klsi_105_write (struct usb_serial_port *port, - const unsigned char *buf, - int count); -static void klsi_105_write_bulk_callback (struct urb *urb); -static int klsi_105_chars_in_buffer (struct usb_serial_port *port); -static int klsi_105_write_room (struct usb_serial_port *port); - -static void klsi_105_read_bulk_callback (struct urb *urb); -static void klsi_105_set_termios (struct usb_serial_port *port, - struct ktermios *old); -static void klsi_105_throttle (struct usb_serial_port *port); -static void klsi_105_unthrottle (struct usb_serial_port *port); -/* -static void klsi_105_break_ctl (struct usb_serial_port *port, - int break_state ); - */ -static int klsi_105_tiocmget (struct usb_serial_port *port, - struct file *file); -static int klsi_105_tiocmset (struct usb_serial_port *port, - struct file *file, unsigned int set, - unsigned int clear); +static int klsi_105_startup(struct usb_serial *serial); +static void klsi_105_shutdown(struct usb_serial *serial); +static int klsi_105_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void klsi_105_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int klsi_105_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +static void klsi_105_write_bulk_callback(struct urb *urb); +static int klsi_105_chars_in_buffer(struct tty_struct *tty); +static int klsi_105_write_room(struct tty_struct *tty); +static void klsi_105_read_bulk_callback(struct urb *urb); +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void klsi_105_throttle(struct tty_struct *tty); +static void klsi_105_unthrottle(struct tty_struct *tty); +static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file); +static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); /* * All of the device info needed for the KLSI converters. @@ -109,7 +101,7 @@ static struct usb_device_id id_table [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kl5kusb105d_driver = { .name = "kl5kusb105d", @@ -134,7 +126,7 @@ static struct usb_serial_driver kl5kusb105d_device = { .write_bulk_callback = klsi_105_write_bulk_callback, .chars_in_buffer = klsi_105_chars_in_buffer, .write_room = klsi_105_write_room, - .read_bulk_callback =klsi_105_read_bulk_callback, + .read_bulk_callback = klsi_105_read_bulk_callback, .set_termios = klsi_105_set_termios, /*.break_ctl = klsi_105_break_ctl,*/ .tiocmget = klsi_105_tiocmget, @@ -161,7 +153,7 @@ struct klsi_105_private { struct ktermios termios; unsigned long line_state; /* modem line settings */ /* write pool */ - struct urb * write_urb_pool[NUM_URBS]; + struct urb *write_urb_pool[NUM_URBS]; spinlock_t lock; unsigned long bytes_in; unsigned long bytes_out; @@ -180,15 +172,15 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, { int rc; - rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_SET_DATA, - USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, /* value */ - 0, /* index */ - settings, - sizeof(struct klsi_105_port_settings), - KLSI_TIMEOUT); + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_SET_DATA, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, + 0, /* value */ + 0, /* index */ + settings, + sizeof(struct klsi_105_port_settings), + KLSI_TIMEOUT); if (rc < 0) err("Change port settings failed (error = %d)", rc); info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d", @@ -196,7 +188,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port, settings->pktlen, settings->baudrate, settings->databits, settings->unknown1, settings->unknown2); - return rc; + return rc; } /* klsi_105_chg_port_settings */ /* translate a 16-bit status value from the device to linux's TIO bits */ @@ -210,9 +202,9 @@ static unsigned long klsi_105_status2linestate(const __u16 status) return res; } -/* +/* * Read line control via vendor command and return result through - * *line_state_p + * *line_state_p */ /* It seems that the status buffer has always only 2 bytes length */ #define KLSI_STATUSBUF_LEN 2 @@ -220,14 +212,14 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, unsigned long *line_state_p) { int rc; - __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1}; + __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1}; __u16 status; info("%s - sending SIO Poll request", __func__); - rc = usb_control_msg(port->serial->dev, + rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_POLL, - USB_TYPE_VENDOR | USB_DIR_IN, + USB_TYPE_VENDOR | USB_DIR_IN, 0, /* value */ 0, /* index */ status_buf, KLSI_STATUSBUF_LEN, @@ -236,15 +228,14 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, if (rc < 0) err("Reading line status failed (error = %d)", rc); else { - status = le16_to_cpu(get_unaligned((__le16 *)status_buf)); + status = get_unaligned_le16(status_buf); info("%s - read status %x %x", __func__, status_buf[0], status_buf[1]); *line_state_p = klsi_105_status2linestate(status); } - - return rc; + return rc; } @@ -252,7 +243,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int klsi_105_startup (struct usb_serial *serial) +static int klsi_105_startup(struct usb_serial *serial) { struct klsi_105_private *priv; int i, j; @@ -262,7 +253,7 @@ static int klsi_105_startup (struct usb_serial *serial) */ /* allocate the private data structure */ - for (i=0; i<serial->num_ports; i++) { + for (i = 0; i < serial->num_ports; i++) { priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { @@ -283,9 +274,9 @@ static int klsi_105_startup (struct usb_serial *serial) priv->bytes_out = 0; usb_set_serial_port_data(serial->port[i], priv); - spin_lock_init (&priv->lock); - for (j=0; j<NUM_URBS; j++) { - struct urb* urb = usb_alloc_urb(0, GFP_KERNEL); + spin_lock_init(&priv->lock); + for (j = 0; j < NUM_URBS; j++) { + struct urb *urb = usb_alloc_urb(0, GFP_KERNEL); priv->write_urb_pool[j] = urb; if (urb == NULL) { @@ -293,10 +284,11 @@ static int klsi_105_startup (struct usb_serial *serial) goto err_cleanup; } - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - err("%s - out of memory for urb buffers.", __func__); + err("%s - out of memory for urb buffers.", + __func__); goto err_cleanup; } } @@ -304,13 +296,13 @@ static int klsi_105_startup (struct usb_serial *serial) /* priv->termios is left uninitalized until port opening */ init_waitqueue_head(&serial->port[i]->write_wait); } - + return 0; err_cleanup: for (; i >= 0; i--) { priv = usb_get_serial_port_data(serial->port[i]); - for (j=0; j < NUM_URBS; j++) { + for (j = 0; j < NUM_URBS; j++) { if (priv->write_urb_pool[j]) { kfree(priv->write_urb_pool[j]->transfer_buffer); usb_free_urb(priv->write_urb_pool[j]); @@ -322,22 +314,23 @@ err_cleanup: } /* klsi_105_startup */ -static void klsi_105_shutdown (struct usb_serial *serial) +static void klsi_105_shutdown(struct usb_serial *serial) { int i; - + dbg("%s", __func__); /* stop reads and writes on all ports */ - for (i=0; i < serial->num_ports; ++i) { - struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]); + for (i = 0; i < serial->num_ports; ++i) { + struct klsi_105_private *priv = + usb_get_serial_port_data(serial->port[i]); unsigned long flags; if (priv) { /* kill our write urb pool */ int j; struct urb **write_urbs = priv->write_urb_pool; - spin_lock_irqsave(&priv->lock,flags); + spin_lock_irqsave(&priv->lock, flags); for (j = 0; j < NUM_URBS; j++) { if (write_urbs[j]) { @@ -349,19 +342,18 @@ static void klsi_105_shutdown (struct usb_serial *serial) * oopses. */ /* usb_kill_urb(write_urbs[j]); */ kfree(write_urbs[j]->transfer_buffer); - usb_free_urb (write_urbs[j]); + usb_free_urb(write_urbs[j]); } } - - spin_unlock_irqrestore (&priv->lock, flags); - + spin_unlock_irqrestore(&priv->lock, flags); kfree(priv); usb_set_serial_port_data(serial->port[i], NULL); } } } /* klsi_105_shutdown */ -static int klsi_105_open (struct usb_serial_port *port, struct file *filp) +static int klsi_105_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int retval = 0; @@ -375,11 +367,11 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) /* force low_latency on so that our tty_push actually forces * the data through - * port->tty->low_latency = 1; */ + * tty->low_latency = 1; */ /* Do a defined restart: * Set up sane default baud rate and send the 'READ_ON' - * vendor command. + * vendor command. * FIXME: set modem line control (how?) * Then read the modem line control and store values in * priv->line_state. @@ -390,24 +382,24 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) cfg.unknown1 = 0; cfg.unknown2 = 1; klsi_105_chg_port_settings(port, &cfg); - + /* set up termios structure */ - spin_lock_irqsave (&priv->lock, flags); - priv->termios.c_iflag = port->tty->termios->c_iflag; - priv->termios.c_oflag = port->tty->termios->c_oflag; - priv->termios.c_cflag = port->tty->termios->c_cflag; - priv->termios.c_lflag = port->tty->termios->c_lflag; - for (i=0; i<NCCS; i++) - priv->termios.c_cc[i] = port->tty->termios->c_cc[i]; + spin_lock_irqsave(&priv->lock, flags); + priv->termios.c_iflag = tty->termios->c_iflag; + priv->termios.c_oflag = tty->termios->c_oflag; + priv->termios.c_cflag = tty->termios->c_cflag; + priv->termios.c_lflag = tty->termios->c_lflag; + for (i = 0; i < NCCS; i++) + priv->termios.c_cc[i] = tty->termios->c_cc[i]; priv->cfg.pktlen = cfg.pktlen; priv->cfg.baudrate = cfg.baudrate; priv->cfg.databits = cfg.databits; priv->cfg.unknown1 = cfg.unknown1; priv->cfg.unknown2 = cfg.unknown2; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); /* READ_ON and urb submission */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -423,7 +415,7 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) } rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev,0), + usb_sndctrlpipe(port->serial->dev, 0), KL5KUSB105A_SIO_CONFIGURE, USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, KL5KUSB105A_SIO_CONFIGURE_READ_ON, @@ -434,14 +426,14 @@ static int klsi_105_open (struct usb_serial_port *port, struct file *filp) if (rc < 0) { err("Enabling read failed (error = %d)", rc); retval = rc; - } else + } else dbg("%s - enabled reading", __func__); rc = klsi_105_get_line_state(port, &line_state); if (rc >= 0) { - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - read line state 0x%lx", __func__, line_state); retval = 0; } else @@ -452,7 +444,8 @@ exit: } /* klsi_105_open */ -static void klsi_105_close (struct usb_serial_port *port, struct file *filp) +static void klsi_105_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int rc; @@ -462,14 +455,14 @@ static void klsi_105_close (struct usb_serial_port *port, struct file *filp) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* send READ_OFF */ - rc = usb_control_msg (port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_CONFIGURE, - USB_TYPE_VENDOR | USB_DIR_OUT, - KL5KUSB105A_SIO_CONFIGURE_READ_OFF, - 0, /* index */ - NULL, 0, - KLSI_TIMEOUT); + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); if (rc < 0) err("Disabling read failed (error = %d)", rc); } @@ -482,23 +475,24 @@ static void klsi_105_close (struct usb_serial_port *port, struct file *filp) /* FIXME */ /* wgg - do I need this? I think so. */ usb_kill_urb(port->interrupt_in_urb); - info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out); + info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", + priv->bytes_in, priv->bytes_out); } /* klsi_105_close */ /* We need to write a complete 64-byte data block and encode the - * number actually sent in the first double-byte, LSB-order. That + * number actually sent in the first double-byte, LSB-order. That * leaves at most 62 bytes of payload. */ #define KLSI_105_DATA_OFFSET 2 /* in the bulk urb data block */ -static int klsi_105_write (struct usb_serial_port *port, - const unsigned char *buf, int count) +static int klsi_105_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int result, size; - int bytes_sent=0; + int bytes_sent = 0; dbg("%s - port %d", __func__, port->number); @@ -507,34 +501,37 @@ static int klsi_105_write (struct usb_serial_port *port, struct urb *urb = NULL; unsigned long flags; int i; - /* since the pool is per-port we might not need the spin lock !? */ - spin_lock_irqsave (&priv->lock, flags); - for (i=0; i<NUM_URBS; i++) { + /* since the pool is per-port we might not need + the spin lock !? */ + spin_lock_irqsave(&priv->lock, flags); + for (i = 0; i < NUM_URBS; i++) { if (priv->write_urb_pool[i]->status != -EINPROGRESS) { urb = priv->write_urb_pool[i]; dbg("%s - using pool URB %d", __func__, i); break; } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); - if (urb==NULL) { + if (urb == NULL) { dbg("%s - no more free urbs", __func__); goto exit; } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); if (urb->transfer_buffer == NULL) { err("%s - no more kernel memory...", __func__); goto exit; } } - size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET); - size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET); + size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET); + size = min(size, URB_TRANSFER_BUFFER_SIZE - + KLSI_105_DATA_OFFSET); - memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size); + memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size); /* write payload size into transfer buffer */ ((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF); @@ -552,7 +549,8 @@ static int klsi_105_write (struct usb_serial_port *port, /* send the data out the bulk port */ result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); goto exit; } buf += size; @@ -561,12 +559,12 @@ static int klsi_105_write (struct usb_serial_port *port, } exit: /* lockless, but it's for debug info only... */ - priv->bytes_out+=bytes_sent; + priv->bytes_out += bytes_sent; return bytes_sent; /* that's how much we wrote */ } /* klsi_105_write */ -static void klsi_105_write_bulk_callback ( struct urb *urb) +static void klsi_105_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -584,50 +582,50 @@ static void klsi_105_write_bulk_callback ( struct urb *urb) /* return number of characters currently in the writing process */ -static int klsi_105_chars_in_buffer (struct usb_serial_port *port) +static int klsi_105_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int chars = 0; int i; unsigned long flags; struct klsi_105_private *priv = usb_get_serial_port_data(port); - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (priv->write_urb_pool[i]->status == -EINPROGRESS) { + if (priv->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - returns %d", __func__, chars); - return (chars); + return chars; } -static int klsi_105_write_room (struct usb_serial_port *port) +static int klsi_105_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; unsigned long flags; int i; int room = 0; struct klsi_105_private *priv = usb_get_serial_port_data(port); - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (priv->write_urb_pool[i]->status != -EINPROGRESS) { + if (priv->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; - } } - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - returns %d", __func__, room); - return (room); + return room; } -static void klsi_105_read_bulk_callback (struct urb *urb) +static void klsi_105_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct klsi_105_private *priv = usb_get_serial_port_data(port); @@ -660,13 +658,13 @@ static void klsi_105_read_bulk_callback (struct urb *urb) } else { int bytes_sent = ((__u8 *) data)[0] + ((unsigned int) ((__u8 *) data)[1] << 8); - tty = port->tty; + tty = port->port.tty; /* we should immediately resubmit the URB, before attempting * to pass the data on to the tty layer. But that needs locking * against re-entry an then mixed-up data because of * intermixed tty_flip_buffer_push()s * FIXME - */ + */ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); @@ -686,7 +684,7 @@ static void klsi_105_read_bulk_callback (struct urb *urb) priv->bytes_in += bytes_sent; } /* Continue trying to always read */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, @@ -695,15 +693,16 @@ static void klsi_105_read_bulk_callback (struct urb *urb) port); rc = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (rc) - err("%s - failed resubmitting read urb, error %d", __func__, rc); + err("%s - failed resubmitting read urb, error %d", + __func__, rc); } /* klsi_105_read_bulk_callback */ -static void klsi_105_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) { struct klsi_105_private *priv = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; unsigned int iflag = tty->termios->c_iflag; unsigned int old_iflag = old_termios->c_iflag; unsigned int cflag = tty->termios->c_cflag; @@ -711,65 +710,63 @@ static void klsi_105_set_termios (struct usb_serial_port *port, struct klsi_105_port_settings cfg; unsigned long flags; speed_t baud; - + /* lock while we are modifying the settings */ - spin_lock_irqsave (&priv->lock, flags); - + spin_lock_irqsave(&priv->lock, flags); + /* * Update baud rate */ baud = tty_get_baud_rate(tty); - if( (cflag & CBAUD) != (old_cflag & CBAUD) ) { - /* reassert DTR and (maybe) RTS on transition from B0 */ - if( (old_cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) != (old_cflag & CBAUD)) { + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { dbg("%s: baud was B0", __func__); #if 0 priv->control_state |= TIOCM_DTR; /* don't set RTS if using hardware flow control */ - if (!(old_cflag & CRTSCTS)) { + if (!(old_cflag & CRTSCTS)) priv->control_state |= TIOCM_RTS; - } mct_u232_set_modem_ctrl(serial, priv->control_state); #endif } } - switch(baud) { - case 0: /* handled below */ - break; - case 1200: - priv->cfg.baudrate = kl5kusb105a_sio_b1200; - break; - case 2400: - priv->cfg.baudrate = kl5kusb105a_sio_b2400; - break; - case 4800: - priv->cfg.baudrate = kl5kusb105a_sio_b4800; - break; - case 9600: - priv->cfg.baudrate = kl5kusb105a_sio_b9600; - break; - case 19200: - priv->cfg.baudrate = kl5kusb105a_sio_b19200; - break; - case 38400: - priv->cfg.baudrate = kl5kusb105a_sio_b38400; - break; - case 57600: - priv->cfg.baudrate = kl5kusb105a_sio_b57600; - break; - case 115200: - priv->cfg.baudrate = kl5kusb105a_sio_b115200; - break; - default: - dbg("KLSI USB->Serial converter:" - " unsupported baudrate request, using default" - " of 9600"); + switch (baud) { + case 0: /* handled below */ + break; + case 1200: + priv->cfg.baudrate = kl5kusb105a_sio_b1200; + break; + case 2400: + priv->cfg.baudrate = kl5kusb105a_sio_b2400; + break; + case 4800: + priv->cfg.baudrate = kl5kusb105a_sio_b4800; + break; + case 9600: + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + break; + case 19200: + priv->cfg.baudrate = kl5kusb105a_sio_b19200; + break; + case 38400: + priv->cfg.baudrate = kl5kusb105a_sio_b38400; + break; + case 57600: + priv->cfg.baudrate = kl5kusb105a_sio_b57600; + break; + case 115200: + priv->cfg.baudrate = kl5kusb105a_sio_b115200; + break; + default: + dbg("KLSI USB->Serial converter:" + " unsupported baudrate request, using default of 9600"); priv->cfg.baudrate = kl5kusb105a_sio_b9600; - baud = 9600; - break; + baud = 9600; + break; } - if ((cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) == B0) { dbg("%s: baud is B0", __func__); /* Drop RTS and DTR */ /* maybe this should be simulated by sending read @@ -778,7 +775,7 @@ static void klsi_105_set_termios (struct usb_serial_port *port, ; #if 0 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, priv->control_state); + mct_u232_set_modem_ctrl(serial, priv->control_state); #endif } tty_encode_baud_rate(tty, baud, baud); @@ -788,11 +785,11 @@ static void klsi_105_set_termios (struct usb_serial_port *port, switch (cflag & CSIZE) { case CS5: dbg("%s - 5 bits/byte not supported", __func__); - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return ; case CS6: dbg("%s - 6 bits/byte not supported", __func__); - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return ; case CS7: priv->cfg.databits = kl5kusb105a_dtb_7; @@ -811,8 +808,7 @@ static void klsi_105_set_termios (struct usb_serial_port *port, * Update line control register (LCR) */ if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) - || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) { - + || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { /* Not currently supported */ tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB); #if 0 @@ -833,20 +829,18 @@ static void klsi_105_set_termios (struct usb_serial_port *port, #endif ; } - /* * Set flow control: well, I do not really now how to handle DTR/RTS. * Just do what we have seen with SniffUSB on Win98. */ - if( (iflag & IXOFF) != (old_iflag & IXOFF) + if ((iflag & IXOFF) != (old_iflag & IXOFF) || (iflag & IXON) != (old_iflag & IXON) - || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) { - + || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { /* Not currently supported */ tty->termios->c_cflag &= ~CRTSCTS; /* Drop DTR/RTS if no flow control otherwise assert */ #if 0 - if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) ) + if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) priv->control_state |= TIOCM_DTR | TIOCM_RTS; else priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); @@ -854,19 +848,21 @@ static void klsi_105_set_termios (struct usb_serial_port *port, #endif ; } - memcpy (&cfg, &priv->cfg, sizeof(cfg)); - spin_unlock_irqrestore (&priv->lock, flags); - + memcpy(&cfg, &priv->cfg, sizeof(cfg)); + spin_unlock_irqrestore(&priv->lock, flags); + /* now commit changes to device */ klsi_105_chg_port_settings(port, &cfg); } /* klsi_105_set_termios */ #if 0 -static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - struct mct_u232_private *priv = (struct mct_u232_private *)port->private; + struct mct_u232_private *priv = + (struct mct_u232_private *)port->private; unsigned char lcr = priv->last_lcr; dbg("%sstate=%d", __func__, break_state); @@ -878,8 +874,9 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) } /* mct_u232_break_ctl */ #endif -static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file) +static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct klsi_105_private *priv = usb_get_serial_port_data(port); unsigned long flags; int rc; @@ -893,18 +890,18 @@ static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file) return rc; } - spin_lock_irqsave (&priv->lock, flags); + spin_lock_irqsave(&priv->lock, flags); priv->line_state = line_state; - spin_unlock_irqrestore (&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - read line state 0x%lx", __func__, line_state); return (int)line_state; } -static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear) +static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { int retval = -EINVAL; - + dbg("%s", __func__); /* if this ever gets implemented, it should be done something like this: @@ -929,14 +926,16 @@ static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file, return retval; } -static void klsi_105_throttle (struct usb_serial_port *port) +static void klsi_105_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); } -static void klsi_105_unthrottle (struct usb_serial_port *port) +static void klsi_105_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int result; dbg("%s - port %d", __func__, port->number); @@ -950,7 +949,7 @@ static void klsi_105_unthrottle (struct usb_serial_port *port) -static int __init klsi_105_init (void) +static int __init klsi_105_init(void) { int retval; retval = usb_serial_register(&kl5kusb105d_device); @@ -969,19 +968,19 @@ failed_usb_serial_register: } -static void __exit klsi_105_exit (void) +static void __exit klsi_105_exit(void) { - usb_deregister (&kl5kusb105d_driver); - usb_serial_deregister (&kl5kusb105d_device); + usb_deregister(&kl5kusb105d_driver); + usb_serial_deregister(&kl5kusb105d_device); } -module_init (klsi_105_init); -module_exit (klsi_105_exit); +module_init(klsi_105_init); +module_exit(klsi_105_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 693f00da7c0..deba28ec77e 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -1,7 +1,7 @@ /* * KOBIL USB Smart Card Terminal Driver * - * Copyright (C) 2002 KOBIL Systems GmbH + * Copyright (C) 2002 KOBIL Systems GmbH * Author: Thomas Wahrenbruch * * Contact: linuxusb@kobil.de @@ -20,7 +20,7 @@ * * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus * (Adapter K), B1 Professional and KAAN Professional (Adapter B) - * + * * (21/05/2004) tw * Fix bug with P'n'P readers * @@ -44,7 +44,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/ioctl.h> @@ -68,21 +68,24 @@ static int debug; /* Function prototypes */ -static int kobil_startup (struct usb_serial *serial); -static void kobil_shutdown (struct usb_serial *serial); -static int kobil_open (struct usb_serial_port *port, struct file *filp); -static void kobil_close (struct usb_serial_port *port, struct file *filp); -static int kobil_write (struct usb_serial_port *port, +static int kobil_startup(struct usb_serial *serial); +static void kobil_shutdown(struct usb_serial *serial); +static int kobil_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -static int kobil_write_room(struct usb_serial_port *port); -static int kobil_ioctl(struct usb_serial_port *port, struct file *file, +static int kobil_write_room(struct tty_struct *tty); +static int kobil_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static int kobil_tiocmget(struct usb_serial_port *port, struct file *file); -static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, +static int kobil_tiocmget(struct tty_struct *tty, struct file *file); +static int kobil_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static void kobil_read_int_callback( struct urb *urb ); -static void kobil_write_callback( struct urb *purb ); -static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old); +static void kobil_read_int_callback(struct urb *urb); +static void kobil_write_callback(struct urb *purb); +static void kobil_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); static struct usb_device_id id_table [] = { @@ -94,7 +97,7 @@ static struct usb_device_id id_table [] = { }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver kobil_driver = { .name = "kobil", @@ -131,14 +134,14 @@ static struct usb_serial_driver kobil_device = { struct kobil_private { int write_int_endpoint_address; int read_int_endpoint_address; - unsigned char buf[KOBIL_BUF_LENGTH]; // buffer for the APDU to send - int filled; // index of the last char in buf - int cur_pos; // index of the next char to send in buf + unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */ + int filled; /* index of the last char in buf */ + int cur_pos; /* index of the next char to send in buf */ __u16 device_type; }; -static int kobil_startup (struct usb_serial *serial) +static int kobil_startup(struct usb_serial *serial) { int i; struct kobil_private *priv; @@ -149,20 +152,20 @@ static int kobil_startup (struct usb_serial *serial) struct usb_host_endpoint *endpoint; priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL); - if (!priv){ + if (!priv) return -ENOMEM; - } priv->filled = 0; priv->cur_pos = 0; priv->device_type = le16_to_cpu(serial->dev->descriptor.idProduct); - switch (priv->device_type){ + switch (priv->device_type) { case KOBIL_ADAPTER_B_PRODUCT_ID: printk(KERN_DEBUG "KOBIL B1 PRO / KAAN PRO detected\n"); break; case KOBIL_ADAPTER_K_PRODUCT_ID: - printk(KERN_DEBUG "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); + printk(KERN_DEBUG + "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); break; case KOBIL_USBTWIN_PRODUCT_ID: printk(KERN_DEBUG "KOBIL USBTWIN detected\n"); @@ -173,44 +176,48 @@ static int kobil_startup (struct usb_serial *serial) } usb_set_serial_port_data(serial->port[0], priv); - // search for the necessary endpoints + /* search for the necessary endpoints */ pdev = serial->dev; - actconfig = pdev->actconfig; - interface = actconfig->interface[0]; + actconfig = pdev->actconfig; + interface = actconfig->interface[0]; altsetting = interface->cur_altsetting; - endpoint = altsetting->endpoint; - - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { + endpoint = altsetting->endpoint; + + for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; if (usb_endpoint_is_int_out(&endpoint->desc)) { - dbg("%s Found interrupt out endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress); - priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; - } + dbg("%s Found interrupt out endpoint. Address: %d", + __func__, endpoint->desc.bEndpointAddress); + priv->write_int_endpoint_address = + endpoint->desc.bEndpointAddress; + } if (usb_endpoint_is_int_in(&endpoint->desc)) { - dbg("%s Found interrupt in endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress); - priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; - } + dbg("%s Found interrupt in endpoint. Address: %d", + __func__, endpoint->desc.bEndpointAddress); + priv->read_int_endpoint_address = + endpoint->desc.bEndpointAddress; + } } return 0; } -static void kobil_shutdown (struct usb_serial *serial) +static void kobil_shutdown(struct usb_serial *serial) { int i; dbg("%s - port %d", __func__, serial->port[0]->number); - for (i=0; i < serial->num_ports; ++i) { - while (serial->port[i]->open_count > 0) { - kobil_close (serial->port[i], NULL); - } + for (i = 0; i < serial->num_ports; ++i) { + while (serial->port[i]->port.count > 0) + kobil_close(NULL, serial->port[i], NULL); kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } } -static int kobil_open (struct usb_serial_port *port, struct file *filp) +static int kobil_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int result = 0; struct kobil_private *priv; @@ -221,7 +228,7 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); priv = usb_get_serial_port_data(port); - // someone sets the dev to 0 if the close method has been called + /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; @@ -229,100 +236,115 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) * the data through, otherwise it is scheduled, and with high * data rates (like with OHCI) data can get lost. */ - port->tty->low_latency = 1; - - // without this, every push_tty_char is echoed :-( - port->tty->termios->c_lflag = 0; - port->tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); - port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; - port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) - - // allocate memory for transfer buffer + if (tty) { + tty->low_latency = 1; + + /* Default to echo off and other sane device settings */ + tty->termios->c_lflag = 0; + tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | + XCASE); + tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF; + /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ + tty->termios->c_oflag &= ~ONLCR; + } + /* allocate memory for transfer buffer */ transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); - if (! transfer_buffer) { + if (!transfer_buffer) return -ENOMEM; - } - - // allocate write_urb - if (!port->write_urb) { - dbg("%s - port %d Allocating port->write_urb", __func__, port->number); - port->write_urb = usb_alloc_urb(0, GFP_KERNEL); + + /* allocate write_urb */ + if (!port->write_urb) { + dbg("%s - port %d Allocating port->write_urb", + __func__, port->number); + port->write_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->write_urb) { - dbg("%s - port %d usb_alloc_urb failed", __func__, port->number); + dbg("%s - port %d usb_alloc_urb failed", + __func__, port->number); kfree(transfer_buffer); return -ENOMEM; } } - // allocate memory for write_urb transfer buffer - port->write_urb->transfer_buffer = kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL); - if (! port->write_urb->transfer_buffer) { + /* allocate memory for write_urb transfer buffer */ + port->write_urb->transfer_buffer = + kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL); + if (!port->write_urb->transfer_buffer) { kfree(transfer_buffer); usb_free_urb(port->write_urb); port->write_urb = NULL; return -ENOMEM; - } - - // get hardware version - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_GetMisc, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, - SUSBCR_MSC_GetHWVersion, - 0, - transfer_buffer, - transfer_buffer_length, - KOBIL_TIMEOUT + } + + /* get hardware version */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetMisc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + SUSBCR_MSC_GetHWVersion, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT + ); + dbg("%s - port %d Send get_HW_version URB returns: %i", + __func__, port->number, result); + dbg("Harware version: %i.%i.%i", + transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + + /* get firmware version */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetMisc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + SUSBCR_MSC_GetFWVersion, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT + ); + dbg("%s - port %d Send get_FW_version URB returns: %i", + __func__, port->number, result); + dbg("Firmware version: %i.%i.%i", + transfer_buffer[0], transfer_buffer[1], transfer_buffer[2]); + + if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { + /* Setting Baudrate, Parity and Stopbits */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetBaudRateParityAndStopBits, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | + SUSBCR_SPASB_1StopBit, + 0, + transfer_buffer, + 0, + KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_HW_version URB returns: %i", __func__, port->number, result); - dbg("Harware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] ); - - // get firmware version - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_GetMisc, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, - SUSBCR_MSC_GetFWVersion, - 0, - transfer_buffer, - transfer_buffer_length, - KOBIL_TIMEOUT + dbg("%s - port %d Send set_baudrate URB returns: %i", + __func__, port->number, result); + + /* reset all queues */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_Misc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_MSC_ResetAllQueues, + 0, + transfer_buffer, + 0, + KOBIL_TIMEOUT ); - dbg("%s - port %d Send get_FW_version URB returns: %i", __func__, port->number, result); - dbg("Firmware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] ); - - if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { - // Setting Baudrate, Parity and Stopbits - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_SetBaudRateParityAndStopBits, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | SUSBCR_SPASB_1StopBit, - 0, - transfer_buffer, - 0, - KOBIL_TIMEOUT - ); - dbg("%s - port %d Send set_baudrate URB returns: %i", __func__, port->number, result); - - // reset all queues - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_Misc, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - SUSBCR_MSC_ResetAllQueues, - 0, - transfer_buffer, - 0, - KOBIL_TIMEOUT - ); - dbg("%s - port %d Send reset_all_queues URB returns: %i", __func__, port->number, result); + dbg("%s - port %d Send reset_all_queues URB returns: %i", + __func__, port->number, result); } - if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { - // start reading (Adapter B 'cause PNP string) - result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC ); - dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); + /* start reading (Adapter B 'cause PNP string) */ + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + dbg("%s - port %d Send read URB returns: %i", + __func__, port->number, result); } kfree(transfer_buffer); @@ -330,13 +352,14 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp) } -static void kobil_close (struct usb_serial_port *port, struct file *filp) +static void kobil_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __func__, port->number); if (port->write_urb) { usb_kill_urb(port->write_urb); - usb_free_urb( port->write_urb ); + usb_free_urb(port->write_urb); port->write_urb = NULL; } usb_kill_urb(port->interrupt_in_urb); @@ -350,7 +373,7 @@ static void kobil_read_int_callback(struct urb *urb) struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int status = urb->status; -// char *dbg_data; +/* char *dbg_data; */ dbg("%s - port %d", __func__, port->number); @@ -360,51 +383,53 @@ static void kobil_read_int_callback(struct urb *urb) return; } - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { - // BEGIN DEBUG + /* BEGIN DEBUG */ /* - dbg_data = kzalloc((3 * purb->actual_length + 10) * sizeof(char), GFP_KERNEL); + dbg_data = kzalloc((3 * purb->actual_length + 10) + * sizeof(char), GFP_KERNEL); if (! dbg_data) { - return; + return; } - for (i = 0; i < purb->actual_length; i++) { - sprintf(dbg_data +3*i, "%02X ", data[i]); + for (i = 0; i < purb->actual_length; i++) { + sprintf(dbg_data +3*i, "%02X ", data[i]); } - dbg(" <-- %s", dbg_data ); + dbg(" <-- %s", dbg_data); kfree(dbg_data); */ - // END DEBUG + /* END DEBUG */ tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } - - // someone sets the dev to 0 if the close method has been called + /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); - dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); + dbg("%s - port %d Send read URB returns: %i", + __func__, port->number, result); } -static void kobil_write_callback( struct urb *purb ) +static void kobil_write_callback(struct urb *purb) { } -static int kobil_write (struct usb_serial_port *port, +static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { int length = 0; int result = 0; int todo = 0; - struct kobil_private * priv; + struct kobil_private *priv; if (count == 0) { - dbg("%s - port %d write request of 0 bytes", __func__, port->number); + dbg("%s - port %d write request of 0 bytes", + __func__, port->number); return 0; } @@ -415,106 +440,113 @@ static int kobil_write (struct usb_serial_port *port, return -ENOMEM; } - // Copy data to buffer - memcpy (priv->buf + priv->filled, buf, count); - - usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled); - + /* Copy data to buffer */ + memcpy(priv->buf + priv->filled, buf, count); + usb_serial_debug_data(debug, &port->dev, __func__, count, + priv->buf + priv->filled); priv->filled = priv->filled + count; - - // only send complete block. TWIN, KAAN SIM and adapter K use the same protocol. - if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || - ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) { - - // stop reading (except TWIN and KAAN SIM) - if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) + /* only send complete block. TWIN, KAAN SIM and adapter K + use the same protocol. */ + if (((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || + ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4)))) { + /* stop reading (except TWIN and KAAN SIM) */ + if ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) + || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID)) usb_kill_urb(port->interrupt_in_urb); todo = priv->filled - priv->cur_pos; - while(todo > 0) { - // max 8 byte in one urb (endpoint size) + while (todo > 0) { + /* max 8 byte in one urb (endpoint size) */ length = (todo < 8) ? todo : 8; - // copy data to transfer buffer - memcpy(port->write_urb->transfer_buffer, priv->buf + priv->cur_pos, length ); - usb_fill_int_urb( port->write_urb, - port->serial->dev, - usb_sndintpipe(port->serial->dev, priv->write_int_endpoint_address), - port->write_urb->transfer_buffer, - length, - kobil_write_callback, - port, - 8 - ); + /* copy data to transfer buffer */ + memcpy(port->write_urb->transfer_buffer, + priv->buf + priv->cur_pos, length); + usb_fill_int_urb(port->write_urb, + port->serial->dev, + usb_sndintpipe(port->serial->dev, + priv->write_int_endpoint_address), + port->write_urb->transfer_buffer, + length, + kobil_write_callback, + port, + 8 + ); priv->cur_pos = priv->cur_pos + length; - result = usb_submit_urb( port->write_urb, GFP_NOIO ); - dbg("%s - port %d Send write URB returns: %i", __func__, port->number, result); + result = usb_submit_urb(port->write_urb, GFP_NOIO); + dbg("%s - port %d Send write URB returns: %i", + __func__, port->number, result); todo = priv->filled - priv->cur_pos; - if (todo > 0) { + if (todo > 0) msleep(24); - } + } - } // end while - priv->filled = 0; priv->cur_pos = 0; - // someone sets the dev to 0 if the close method has been called + /* someone sets the dev to 0 if the close method + has been called */ port->interrupt_in_urb->dev = port->serial->dev; - - // start reading (except TWIN and KAAN SIM) - if ( (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) ) { - // someone sets the dev to 0 if the close method has been called + + /* start reading (except TWIN and KAAN SIM) */ + if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { + /* someone sets the dev to 0 if the close method has + been called */ port->interrupt_in_urb->dev = port->serial->dev; - - result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO ); - dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result); + + result = usb_submit_urb(port->interrupt_in_urb, + GFP_NOIO); + dbg("%s - port %d Send read URB returns: %i", + __func__, port->number, result); } } return count; } -static int kobil_write_room (struct usb_serial_port *port) +static int kobil_write_room(struct tty_struct *tty) { - //dbg("%s - port %d", __func__, port->number); + /* dbg("%s - port %d", __func__, port->number); */ + /* FIXME */ return 8; } -static int kobil_tiocmget(struct usb_serial_port *port, struct file *file) +static int kobil_tiocmget(struct tty_struct *tty, struct file *file) { - struct kobil_private * priv; + struct usb_serial_port *port = tty->driver_data; + struct kobil_private *priv; int result; unsigned char *transfer_buffer; int transfer_buffer_length = 8; priv = usb_get_serial_port_data(port); - if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) { - // This device doesn't support ioctl calls + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID + || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ return -EINVAL; } - // allocate memory for transfer buffer + /* allocate memory for transfer buffer */ transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); - if (!transfer_buffer) { + if (!transfer_buffer) return -ENOMEM; - } - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_GetStatusLineState, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, - 0, - 0, - transfer_buffer, - transfer_buffer_length, - KOBIL_TIMEOUT); - - dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetStatusLineState, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + 0, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT); + + dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x", __func__, port->number, result, transfer_buffer[0]); result = 0; @@ -524,10 +556,11 @@ static int kobil_tiocmget(struct usb_serial_port *port, struct file *file) return result; } -static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, +static int kobil_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct kobil_private * priv; + struct usb_serial_port *port = tty->driver_data; + struct kobil_private *priv; int result; int dtr = 0; int rts = 0; @@ -536,16 +569,16 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, /* FIXME: locking ? */ priv = usb_get_serial_port_data(port); - if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) { - // This device doesn't support ioctl calls + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID + || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ return -EINVAL; } - // allocate memory for transfer buffer + /* allocate memory for transfer buffer */ transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); - if (! transfer_buffer) { + if (!transfer_buffer) return -ENOMEM; - } if (set & TIOCM_RTS) rts = 1; @@ -558,66 +591,77 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) { if (dtr != 0) - dbg("%s - port %d Setting DTR", __func__, port->number); + dbg("%s - port %d Setting DTR", + __func__, port->number); else - dbg("%s - port %d Clearing DTR", __func__, port->number); - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_SetStatusLinesOrQueues, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR), - 0, - transfer_buffer, - 0, - KOBIL_TIMEOUT); + dbg("%s - port %d Clearing DTR", + __func__, port->number); + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetStatusLinesOrQueues, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR), + 0, + transfer_buffer, + 0, + KOBIL_TIMEOUT); } else { if (rts != 0) - dbg("%s - port %d Setting RTS", __func__, port->number); + dbg("%s - port %d Setting RTS", + __func__, port->number); else - dbg("%s - port %d Clearing RTS", __func__, port->number); - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_SetStatusLinesOrQueues, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS), - 0, - transfer_buffer, - 0, - KOBIL_TIMEOUT); + dbg("%s - port %d Clearing RTS", + __func__, port->number); + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetStatusLinesOrQueues, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS), + 0, + transfer_buffer, + 0, + KOBIL_TIMEOUT); } - dbg("%s - port %d Send set_status_line URB returns: %i", __func__, port->number, result); + dbg("%s - port %d Send set_status_line URB returns: %i", + __func__, port->number, result); kfree(transfer_buffer); return (result < 0) ? result : 0; } -static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old) +static void kobil_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old) { - struct kobil_private * priv; + struct kobil_private *priv; int result; unsigned short urb_val = 0; - int c_cflag = port->tty->termios->c_cflag; + int c_cflag = tty->termios->c_cflag; speed_t speed; - void * settings; + void *settings; priv = usb_get_serial_port_data(port); - if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) - // This device doesn't support ioctl calls + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ + *tty->termios = *old; return; + } - switch (speed = tty_get_baud_rate(port->tty)) { - case 1200: - urb_val = SUSBCR_SBR_1200; - break; - default: - speed = 9600; - case 9600: - urb_val = SUSBCR_SBR_9600; - break; + speed = tty_get_baud_rate(tty); + switch (speed) { + case 1200: + urb_val = SUSBCR_SBR_1200; + break; + default: + speed = 9600; + case 9600: + urb_val = SUSBCR_SBR_9600; + break; } - urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit; + urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : + SUSBCR_SPASB_1StopBit; settings = kzalloc(50, GFP_KERNEL); - if (! settings) + if (!settings) return; sprintf(settings, "%d ", speed); @@ -634,66 +678,69 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old urb_val |= SUSBCR_SPASB_NoParity; strcat(settings, "No Parity"); } - port->tty->termios->c_cflag &= ~CMSPAR; - tty_encode_baud_rate(port->tty, speed, speed); - - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_SetBaudRateParityAndStopBits, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - urb_val, - 0, - settings, - 0, - KOBIL_TIMEOUT + tty->termios->c_cflag &= ~CMSPAR; + tty_encode_baud_rate(tty, speed, speed); + + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetBaudRateParityAndStopBits, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + urb_val, + 0, + settings, + 0, + KOBIL_TIMEOUT ); kfree(settings); } -static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +static int kobil_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { - struct kobil_private * priv = usb_get_serial_port_data(port); + struct usb_serial_port *port = tty->driver_data; + struct kobil_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; int transfer_buffer_length = 8; int result; - if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) - // This device doesn't support ioctl calls - return 0; + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) + /* This device doesn't support ioctl calls */ + return -ENOIOCTLCMD; switch (cmd) { - case TCFLSH: // 0x540B + case TCFLSH: transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL); - if (! transfer_buffer) - return -ENOBUFS; - - result = usb_control_msg( port->serial->dev, - usb_rcvctrlpipe(port->serial->dev, 0 ), - SUSBCRequest_Misc, - USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, - SUSBCR_MSC_ResetAllQueues, - 0, - NULL,//transfer_buffer, - 0, - KOBIL_TIMEOUT + if (!transfer_buffer) + return -ENOBUFS; + + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_Misc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_MSC_ResetAllQueues, + 0, + NULL, /* transfer_buffer, */ + 0, + KOBIL_TIMEOUT ); - + dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result); kfree(transfer_buffer); - return (result < 0) ? -EFAULT : 0; + return (result < 0) ? -EIO: 0; default: return -ENOIOCTLCMD; } } -static int __init kobil_init (void) +static int __init kobil_init(void) { int retval; retval = usb_serial_register(&kobil_device); if (retval) goto failed_usb_serial_register; retval = usb_register(&kobil_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_VERSION " " DRIVER_AUTHOR); @@ -707,18 +754,18 @@ failed_usb_serial_register: } -static void __exit kobil_exit (void) +static void __exit kobil_exit(void) { - usb_deregister (&kobil_driver); - usb_serial_deregister (&kobil_device); + usb_deregister(&kobil_driver); + usb_serial_deregister(&kobil_device); } module_init(kobil_init); module_exit(kobil_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE( "GPL" ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 5fc2cef30e3..0ded8bd6ec8 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -33,10 +33,11 @@ * - Fixed an endianess problem with the baudrate selection for PowerPC. * * 06-Dec-2001 Martin Hamilton <martinh@gnu.org> - * Added support for the Belkin F5U109 DB9 adaptor + * - Added support for the Belkin F5U109 DB9 adaptor * * 30-May-2001 Greg Kroah-Hartman - * switched from using spinlock to a semaphore, which fixes lots of problems. + * - switched from using spinlock to a semaphore, which fixes lots of + * problems. * * 04-May-2001 Stelian Pop * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes @@ -49,7 +50,7 @@ * 08-Apr-2001 gb * - Identify version on module load. * - * 06-Jan-2001 Cornel Ciocirlan + * 06-Jan-2001 Cornel Ciocirlan * - Added support for Sitecom U232-P25 model (Product Id 0x0230) * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200) * @@ -59,8 +60,8 @@ * (lots of things will change if/when the usb-serial core changes to * handle these issues. * - * 27-Nov-2000 Wolfgang Grandegger - * A version for kernel 2.4.0-test10 released to the Linux community + * 27-Nov-2000 Wolfgang Grandegge + * A version for kernel 2.4.0-test10 released to the Linux community * (via linux-usb-devel). */ @@ -73,7 +74,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "mct_u232.h" @@ -90,28 +91,21 @@ static int debug; /* * Function prototypes */ -static int mct_u232_startup (struct usb_serial *serial); -static void mct_u232_shutdown (struct usb_serial *serial); -static int mct_u232_open (struct usb_serial_port *port, - struct file *filp); -static void mct_u232_close (struct usb_serial_port *port, - struct file *filp); -static void mct_u232_read_int_callback (struct urb *urb); -static void mct_u232_set_termios (struct usb_serial_port *port, - struct ktermios * old); -static int mct_u232_ioctl (struct usb_serial_port *port, - struct file * file, - unsigned int cmd, - unsigned long arg); -static void mct_u232_break_ctl (struct usb_serial_port *port, - int break_state ); -static int mct_u232_tiocmget (struct usb_serial_port *port, - struct file *file); -static int mct_u232_tiocmset (struct usb_serial_port *port, - struct file *file, unsigned int set, - unsigned int clear); -static void mct_u232_throttle (struct usb_serial_port *port); -static void mct_u232_unthrottle (struct usb_serial_port *port); +static int mct_u232_startup(struct usb_serial *serial); +static void mct_u232_shutdown(struct usb_serial *serial); +static int mct_u232_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void mct_u232_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void mct_u232_read_int_callback(struct urb *urb); +static void mct_u232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); +static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file); +static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void mct_u232_throttle(struct tty_struct *tty); +static void mct_u232_unthrottle(struct tty_struct *tty); /* @@ -125,7 +119,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver mct_u232_driver = { .name = "mct_u232", @@ -149,7 +143,6 @@ static struct usb_serial_driver mct_u232_device = { .throttle = mct_u232_throttle, .unthrottle = mct_u232_unthrottle, .read_int_callback = mct_u232_read_int_callback, - .ioctl = mct_u232_ioctl, .set_termios = mct_u232_set_termios, .break_ctl = mct_u232_break_ctl, .tiocmget = mct_u232_tiocmget, @@ -180,23 +173,34 @@ struct mct_u232_private { * Later day 2.6.0-test kernels have new baud rates like B230400 which * we do not know how to support. We ignore them for the moment. */ -static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result) +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, + speed_t value, speed_t *result) { *result = value; if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID - || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { + || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { switch (value) { - case 300: return 0x01; - case 600: return 0x02; /* this one not tested */ - case 1200: return 0x03; - case 2400: return 0x04; - case 4800: return 0x06; - case 9600: return 0x08; - case 19200: return 0x09; - case 38400: return 0x0a; - case 57600: return 0x0b; - case 115200: return 0x0c; + case 300: + return 0x01; + case 600: + return 0x02; /* this one not tested */ + case 1200: + return 0x03; + case 2400: + return 0x04; + case 4800: + return 0x06; + case 9600: + return 0x08; + case 19200: + return 0x09; + case 38400: + return 0x0a; + case 57600: + return 0x0b; + case 115200: + return 0x0c; default: *result = 9600; return 0x08; @@ -224,26 +228,27 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value } } -static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port, - speed_t value) +static int mct_u232_set_baud_rate(struct tty_struct *tty, + struct usb_serial *serial, struct usb_serial_port *port, speed_t value) { __le32 divisor; - int rc; - unsigned char zero_byte = 0; - unsigned char cts_enable_byte = 0; - speed_t speed; - - divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, &speed)); - - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - MCT_U232_SET_BAUD_RATE_REQUEST, - MCT_U232_SET_REQUEST_TYPE, - 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, - WDR_TIMEOUT); + int rc; + unsigned char zero_byte = 0; + unsigned char cts_enable_byte = 0; + speed_t speed; + + divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, + &speed)); + + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_BAUD_RATE_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, + WDR_TIMEOUT); if (rc < 0) /*FIXME: What value speed results */ err("Set BAUD RATE %d failed (error = %d)", value, rc); else - tty_encode_baud_rate(port->tty, speed, speed); + tty_encode_baud_rate(tty, speed, speed); dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which @@ -258,55 +263,55 @@ static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_p whether data will be transmitted to a device which is not asserting the 'CTS' signal. If the second message's data byte is zero, data will be transmitted even if 'CTS' is not asserted (i.e. no hardware - flow control). if the second message's data byte is nonzero (a value - of 1 is used by this driver), data will not be transmitted to a device - which is not asserting 'CTS'. + flow control). if the second message's data byte is nonzero (a + value of 1 is used by this driver), data will not be transmitted to + a device which is not asserting 'CTS'. */ rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - MCT_U232_SET_UNKNOWN1_REQUEST, - MCT_U232_SET_REQUEST_TYPE, - 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, - WDR_TIMEOUT); + MCT_U232_SET_UNKNOWN1_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, + WDR_TIMEOUT); if (rc < 0) - err("Sending USB device request code %d failed (error = %d)", + err("Sending USB device request code %d failed (error = %d)", MCT_U232_SET_UNKNOWN1_REQUEST, rc); - if (port && C_CRTSCTS(port->tty)) { + if (port && C_CRTSCTS(tty)) cts_enable_byte = 1; - } - dbg("set_baud_rate: send second control message, data = %02X", cts_enable_byte); + dbg("set_baud_rate: send second control message, data = %02X", + cts_enable_byte); rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - MCT_U232_SET_CTS_REQUEST, - MCT_U232_SET_REQUEST_TYPE, - 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, - WDR_TIMEOUT); + MCT_U232_SET_CTS_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, + WDR_TIMEOUT); if (rc < 0) - err("Sending USB device request code %d failed (error = %d)", - MCT_U232_SET_CTS_REQUEST, rc); + err("Sending USB device request code %d failed (error = %d)", + MCT_U232_SET_CTS_REQUEST, rc); - return rc; + return rc; } /* mct_u232_set_baud_rate */ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) { - int rc; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - MCT_U232_SET_LINE_CTRL_REQUEST, - MCT_U232_SET_REQUEST_TYPE, - 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, - WDR_TIMEOUT); + int rc; + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_LINE_CTRL_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, + WDR_TIMEOUT); if (rc < 0) err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc); dbg("set_line_ctrl: 0x%x", lcr); - return rc; + return rc; } /* mct_u232_set_line_ctrl */ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) { - int rc; + int rc; unsigned char mcr = MCT_U232_MCR_NONE; if (control_state & TIOCM_DTR) @@ -314,37 +319,39 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial, if (control_state & TIOCM_RTS) mcr |= MCT_U232_MCR_RTS; - rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - MCT_U232_SET_MODEM_CTRL_REQUEST, - MCT_U232_SET_REQUEST_TYPE, - 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, - WDR_TIMEOUT); + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_MODEM_CTRL_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, + WDR_TIMEOUT); if (rc < 0) err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc); dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); - return rc; + return rc; } /* mct_u232_set_modem_ctrl */ -static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr) +static int mct_u232_get_modem_stat(struct usb_serial *serial, + unsigned char *msr) { - int rc; - rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCT_U232_GET_MODEM_STAT_REQUEST, - MCT_U232_GET_REQUEST_TYPE, - 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, - WDR_TIMEOUT); + int rc; + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCT_U232_GET_MODEM_STAT_REQUEST, + MCT_U232_GET_REQUEST_TYPE, + 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, + WDR_TIMEOUT); if (rc < 0) { err("Get MODEM STATus failed (error = %d)", rc); *msr = 0; } dbg("get_modem_stat: 0x%x", *msr); - return rc; + return rc; } /* mct_u232_get_modem_stat */ -static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr) +static void mct_u232_msr_to_state(unsigned int *control_state, + unsigned char msr) { - /* Translate Control Line states */ + /* Translate Control Line states */ if (msr & MCT_U232_MSR_DSR) *control_state |= TIOCM_DSR; else @@ -361,14 +368,14 @@ static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr *control_state |= TIOCM_CD; else *control_state &= ~TIOCM_CD; - dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); + dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); } /* mct_u232_msr_to_state */ /* * Driver's tty interface functions */ -static int mct_u232_startup (struct usb_serial *serial) +static int mct_u232_startup(struct usb_serial *serial) { struct mct_u232_private *priv; struct usb_serial_port *port, *rport; @@ -390,18 +397,18 @@ static int mct_u232_startup (struct usb_serial *serial) rport->interrupt_in_urb = NULL; port->read_urb->context = port; - return (0); + return 0; } /* mct_u232_startup */ -static void mct_u232_shutdown (struct usb_serial *serial) +static void mct_u232_shutdown(struct usb_serial *serial) { struct mct_u232_private *priv; int i; - + dbg("%s", __func__); - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) { /* My special items, the standard routines free my urbs */ priv = usb_get_serial_port_data(serial->port[i]); if (priv) { @@ -411,7 +418,8 @@ static void mct_u232_shutdown (struct usb_serial *serial) } } /* mct_u232_shutdown */ -static int mct_u232_open (struct usb_serial_port *port, struct file *filp) +static int mct_u232_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); @@ -428,21 +436,22 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp) * it seems to be able to accept only 16 bytes (and that's what * SniffUSB says too...) */ - if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID) + if (le16_to_cpu(serial->dev->descriptor.idProduct) + == MCT_U232_SITECOM_PID) port->bulk_out_size = 16; - /* Do a defined restart: the normal serial device seems to + /* Do a defined restart: the normal serial device seems to * always turn on DTR and RTS here, so do the same. I'm not * sure if this is really necessary. But it should not harm * either. */ spin_lock_irqsave(&priv->lock, flags); - if (port->tty->termios->c_cflag & CBAUD) + if (tty && (tty->termios->c_cflag & CBAUD)) priv->control_state = TIOCM_DTR | TIOCM_RTS; else priv->control_state = 0; - - priv->last_lcr = (MCT_U232_DATA_BITS_8 | + + priv->last_lcr = (MCT_U232_DATA_BITS_8 | MCT_U232_PARITY_NONE | MCT_U232_STOP_BITS_1); control_state = priv->control_state; @@ -481,15 +490,16 @@ error: } /* mct_u232_open */ -static void mct_u232_close (struct usb_serial_port *port, struct file *filp) +static void mct_u232_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { unsigned int c_cflag; unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); dbg("%s port %d", __func__, port->number); - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; mutex_lock(&port->serial->disc_mutex); if (c_cflag & HUPCL && !port->serial->disconnected) { /* drop DTR and RTS */ @@ -512,7 +522,7 @@ static void mct_u232_close (struct usb_serial_port *port, struct file *filp) } /* mct_u232_close */ -static void mct_u232_read_int_callback (struct urb *urb) +static void mct_u232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct mct_u232_private *priv = usb_get_serial_port_data(port); @@ -545,36 +555,34 @@ static void mct_u232_read_int_callback (struct urb *urb) return; } - dbg("%s - port %d", __func__, port->number); - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + dbg("%s - port %d", __func__, port->number); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); /* * Work-a-round: handle the 'usual' bulk-in pipe here */ if (urb->transfer_buffer_length > 2) { - int i; - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { - for (i = 0; i < urb->actual_length ; ++i) { - tty_insert_flip_char(tty, data[i], 0); - } + tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } goto exit; } - + /* * The interrupt-in pipe signals exceptional conditions (modem line * signal changes and errors). data[0] holds MSR, data[1] holds LSR. */ spin_lock_irqsave(&priv->lock, flags); priv->last_msr = data[MCT_U232_MSR_INDEX]; - + /* Record Control Line states */ mct_u232_msr_to_state(&priv->control_state, priv->last_msr); #if 0 - /* Not yet handled. See belin_sa.c for further information */ + /* Not yet handled. See belkin_sa.c for further information */ /* Now to report any errors */ priv->last_lsr = data[MCT_U232_LSR_INDEX]; /* @@ -583,7 +591,7 @@ static void mct_u232_read_int_callback (struct urb *urb) * to look in to this before committing any code. */ if (priv->last_lsr & MCT_U232_LSR_ERR) { - tty = port->tty; + tty = port->port.tty; /* Overrun Error */ if (priv->last_lsr & MCT_U232_LSR_OE) { } @@ -600,18 +608,19 @@ static void mct_u232_read_int_callback (struct urb *urb) #endif spin_unlock_irqrestore(&priv->lock, flags); exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) - err ("%s - usb_submit_urb failed with result %d", + err("%s - usb_submit_urb failed with result %d", __func__, retval); } /* mct_u232_read_int_callback */ -static void mct_u232_set_termios (struct usb_serial_port *port, - struct ktermios *old_termios) +static void mct_u232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); - struct ktermios *termios = port->tty->termios; + struct ktermios *termios = tty->termios; unsigned int cflag = termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned long flags; @@ -631,20 +640,20 @@ static void mct_u232_set_termios (struct usb_serial_port *port, * Premature optimization is the root of all evil. */ - /* reassert DTR and RTS on transition from B0 */ + /* reassert DTR and RTS on transition from B0 */ if ((old_cflag & CBAUD) == B0) { dbg("%s: baud was B0", __func__); control_state |= TIOCM_DTR | TIOCM_RTS; mct_u232_set_modem_ctrl(serial, control_state); } - mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty)); + mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); - if ((cflag & CBAUD) == B0 ) { + if ((cflag & CBAUD) == B0) { dbg("%s: baud is B0", __func__); /* Drop RTS and DTR */ control_state &= ~(TIOCM_DTR | TIOCM_RTS); - mct_u232_set_modem_ctrl(serial, control_state); + mct_u232_set_modem_ctrl(serial, control_state); } /* @@ -689,8 +698,9 @@ static void mct_u232_set_termios (struct usb_serial_port *port, spin_unlock_irqrestore(&priv->lock, flags); } /* mct_u232_set_termios */ -static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned char lcr; @@ -709,12 +719,13 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) } /* mct_u232_break_ctl */ -static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file) +static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; unsigned long flags; - + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); @@ -724,14 +735,15 @@ static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file) return control_state; } -static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file, +static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned int control_state; unsigned long flags; - + dbg("%s", __func__); spin_lock_irqsave(&priv->lock, flags); @@ -751,77 +763,50 @@ static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file, return mct_u232_set_modem_ctrl(serial, control_state); } -static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file, - unsigned int cmd, unsigned long arg) -{ - dbg("%scmd=0x%x", __func__, cmd); - - /* Based on code from acm.c and others */ - switch (cmd) { - case TIOCMIWAIT: - /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ - /* TODO */ - return( 0 ); - - case TIOCGICOUNT: - /* return count of modemline transitions */ - /* TODO */ - return 0; - - default: - dbg("%s: arg not supported - 0x%04x", __func__,cmd); - return(-ENOIOCTLCMD); - break; - } - return 0; -} /* mct_u232_ioctl */ - -static void mct_u232_throttle (struct usb_serial_port *port) +static void mct_u232_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int control_state; - struct tty_struct *tty; - tty = port->tty; dbg("%s - port %d", __func__, port->number); spin_lock_irqsave(&priv->lock, flags); priv->rx_flags |= THROTTLED; if (C_CRTSCTS(tty)) { - priv->control_state &= ~TIOCM_RTS; - control_state = priv->control_state; - spin_unlock_irqrestore(&priv->lock, flags); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + priv->control_state &= ~TIOCM_RTS; + control_state = priv->control_state; + spin_unlock_irqrestore(&priv->lock, flags); + (void) mct_u232_set_modem_ctrl(port->serial, control_state); } else { - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); } } -static void mct_u232_unthrottle (struct usb_serial_port *port) +static void mct_u232_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct mct_u232_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int control_state; - struct tty_struct *tty; dbg("%s - port %d", __func__, port->number); - tty = port->tty; spin_lock_irqsave(&priv->lock, flags); if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { - priv->rx_flags &= ~THROTTLED; - priv->control_state |= TIOCM_RTS; - control_state = priv->control_state; - spin_unlock_irqrestore(&priv->lock, flags); - (void) mct_u232_set_modem_ctrl(port->serial, control_state); + priv->rx_flags &= ~THROTTLED; + priv->control_state |= TIOCM_RTS; + control_state = priv->control_state; + spin_unlock_irqrestore(&priv->lock, flags); + (void) mct_u232_set_modem_ctrl(port->serial, control_state); } else { - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); } } -static int __init mct_u232_init (void) +static int __init mct_u232_init(void) { int retval; retval = usb_serial_register(&mct_u232_device); @@ -839,18 +824,17 @@ failed_usb_serial_register: } -static void __exit mct_u232_exit (void) +static void __exit mct_u232_exit(void) { - usb_deregister (&mct_u232_driver); - usb_serial_deregister (&mct_u232_device); + usb_deregister(&mct_u232_driver); + usb_serial_deregister(&mct_u232_device); } - -module_init (mct_u232_init); +module_init(mct_u232_init); module_exit(mct_u232_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 50f1fe26333..7c4917d77c0 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -33,7 +33,7 @@ #include <linux/serial_reg.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> /* @@ -64,8 +64,7 @@ #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ /* This structure holds all of the local port information */ -struct moschip_port -{ +struct moschip_port { __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ @@ -76,8 +75,7 @@ struct moschip_port }; /* This structure holds all of the individual serial device information */ -struct moschip_serial -{ +struct moschip_serial { int interrupt_started; }; @@ -88,7 +86,7 @@ static int debug; #define MOSCHIP_DEVICE_ID_7715 0x7715 static struct usb_device_id moschip_port_id_table [] = { - { USB_DEVICE(USB_VENDOR_ID_MOSCHIP,MOSCHIP_DEVICE_ID_7720) }, + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, moschip_port_id_table); @@ -108,7 +106,7 @@ static void mos7720_interrupt_callback(struct urb *urb) __u8 sp1; __u8 sp2; - dbg("%s"," : Entering\n"); + dbg("%s", " : Entering\n"); switch (status) { case 0: @@ -208,7 +206,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) mos7720_port = urb->context; if (!mos7720_port) { - dbg("%s","NULL mos7720_port pointer \n"); + dbg("%s", "NULL mos7720_port pointer \n"); return ; } @@ -218,7 +216,7 @@ static void mos7720_bulk_in_callback(struct urb *urb) data = urb->transfer_buffer; - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -264,7 +262,7 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) dbg("Entering ........."); - tty = mos7720_port->port->tty; + tty = mos7720_port->port->port.tty; if (tty && mos7720_port->open) tty_wakeup(tty); @@ -284,17 +282,16 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, __u16 size = 0x0000; if (value < MOS_MAX_PORT) { - if (product == MOSCHIP_DEVICE_ID_7715) { + if (product == MOSCHIP_DEVICE_ID_7715) value = value*0x100+0x100; - } else { + else value = value*0x100+0x200; - } } else { value = 0x0000; if ((product == MOSCHIP_DEVICE_ID_7715) && (index != 0x08)) { dbg("serial->product== MOSCHIP_DEVICE_ID_7715"); - //index = 0x01 ; + /* index = 0x01 ; */ } } @@ -308,19 +305,20 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value, request = (__u8)MOS_READ; requesttype = (__u8)0xC0; size = 0x01; - pipe = usb_rcvctrlpipe(serial->dev,0); + pipe = usb_rcvctrlpipe(serial->dev, 0); } status = usb_control_msg(serial->dev, pipe, request, requesttype, value, index, data, size, MOS_WDR_TIMEOUT); if (status < 0) - dbg("Command Write failed Value %x index %x\n",value,index); + dbg("Command Write failed Value %x index %x\n", value, index); return status; } -static int mos7720_open(struct usb_serial_port *port, struct file * filp) +static int mos7720_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct usb_serial_port *port0; @@ -351,7 +349,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) /* Initialising the write urb pool */ for (j = 0; j < NUM_URBS; ++j) { - urb = usb_alloc_urb(0,GFP_KERNEL); + urb = usb_alloc_urb(0, GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; if (urb == NULL) { @@ -385,7 +383,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) */ port_number = port->number - port->serial->minor; send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data); - dbg("SS::%p LSR:%x\n",mos7720_port, data); + dbg("SS::%p LSR:%x\n", mos7720_port, data); dbg("Check:Sending Command .........."); @@ -402,10 +400,10 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) data = 0xCF; send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data); data = 0x03; - mos7720_port->shadowLCR = data; + mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0b; - mos7720_port->shadowMCR = data; + mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x0b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); @@ -420,7 +418,8 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) data = 0x03; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); data = 0x00; - send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); + send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT, + port_number + 1, &data); */ data = 0x00; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); @@ -429,28 +428,26 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); data = 0x83; - mos7720_port->shadowLCR = data; + mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); data = 0x00; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x03; - mos7720_port->shadowLCR = data; + mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); -//Matrix - /* force low_latency on so that our tty_push actually forces * * the data through,otherwise it is scheduled, and with * * high data rates (like with OHCI) data can get lost. */ - if (port->tty) - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; /* see if we've set up our endpoint info yet * * (can't set it up in mos7720_startup as the * @@ -465,15 +462,15 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) /* set up our interrupt urb */ usb_fill_int_urb(port0->interrupt_in_urb, serial->dev, - usb_rcvintpipe(serial->dev, - port->interrupt_in_endpointAddress), - port0->interrupt_in_buffer, - port0->interrupt_in_urb->transfer_buffer_length, - mos7720_interrupt_callback, mos7720_port, - port0->interrupt_in_urb->interval); + usb_rcvintpipe(serial->dev, + port->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + port0->interrupt_in_urb->transfer_buffer_length, + mos7720_interrupt_callback, mos7720_port, + port0->interrupt_in_urb->interval); /* start interrupt read for this mos7720 this interrupt * - * will continue as long as the mos7720 is connected */ + * will continue as long as the mos7720 is connected */ dbg("Submit URB over !!!"); response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL); if (response) @@ -485,14 +482,14 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) /* set up our bulk in urb */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), + port->bulk_in_endpointAddress), port->bulk_in_buffer, port->read_urb->transfer_buffer_length, mos7720_bulk_in_callback, mos7720_port); response = usb_submit_urb(port->read_urb, GFP_KERNEL); if (response) - dev_err(&port->dev, - "%s - Error %d submitting read urb\n", __func__, response); + dev_err(&port->dev, "%s - Error %d submitting read urb\n", + __func__, response); /* initialize our icount structure */ memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); @@ -515,8 +512,9 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) * system, * Otherwise we return a negative error number. */ -static int mos7720_chars_in_buffer(struct usb_serial_port *port) +static int mos7720_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int i; int chars = 0; struct moschip_port *mos7720_port; @@ -530,14 +528,16 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port) } for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } dbg("%s - returns %d", __func__, chars); return chars; } -static void mos7720_close(struct usb_serial_port *port, struct file *filp) +static void mos7720_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct moschip_port *mos7720_port; @@ -575,12 +575,12 @@ static void mos7720_close(struct usb_serial_port *port, struct file *filp) * been disconnected */ if (!serial->disconnected) { data = 0x00; - send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, - 0x04, &data); + send_mos_cmd(serial, MOS_WRITE, + port->number - port->serial->minor, 0x04, &data); data = 0x00; - send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, - 0x01, &data); + send_mos_cmd(serial, MOS_WRITE, + port->number - port->serial->minor, 0x01, &data); } mutex_unlock(&serial->disc_mutex); mos7720_port->open = 0; @@ -588,9 +588,10 @@ static void mos7720_close(struct usb_serial_port *port, struct file *filp) dbg("Leaving %s", __func__); } -static void mos7720_break(struct usb_serial_port *port, int break_state) +static void mos7720_break(struct tty_struct *tty, int break_state) { - unsigned char data; + struct usb_serial_port *port = tty->driver_data; + unsigned char data; struct usb_serial *serial; struct moschip_port *mos7720_port; @@ -621,8 +622,9 @@ static void mos7720_break(struct usb_serial_port *port, int break_state) * If successful, we return the amount of room that we have for this port * Otherwise we return a negative error number. */ -static int mos7720_write_room(struct usb_serial_port *port) +static int mos7720_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; int room = 0; int i; @@ -637,7 +639,8 @@ static int mos7720_write_room(struct usb_serial_port *port) /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; } @@ -645,8 +648,8 @@ static int mos7720_write_room(struct usb_serial_port *port) return room; } -static int mos7720_write(struct usb_serial_port *port, - const unsigned char *data, int count) +static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) { int status; int i; @@ -672,9 +675,10 @@ static int mos7720_write(struct usb_serial_port *port, urb = NULL; for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; - dbg("URB:%d",i); + dbg("URB:%d", i); break; } } @@ -692,7 +696,7 @@ static int mos7720_write(struct usb_serial_port *port, goto exit; } } - transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, @@ -701,12 +705,12 @@ static int mos7720_write(struct usb_serial_port *port, /* fill urb with data and submit */ usb_fill_bulk_urb(urb, serial->dev, usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), + port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, mos7720_bulk_out_data_callback, mos7720_port); /* send it down the pipe */ - status = usb_submit_urb(urb,GFP_ATOMIC); + status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { err("%s - usb_submit_urb(write bulk) failed with status = %d", __func__, status); @@ -719,10 +723,10 @@ exit: return bytes_sent; } -static void mos7720_throttle(struct usb_serial_port *port) +static void mos7720_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; - struct tty_struct *tty; int status; dbg("%s- port %d\n", __func__, port->number); @@ -739,16 +743,10 @@ static void mos7720_throttle(struct usb_serial_port *port) dbg("%s: Entering ..........", __func__); - tty = port->tty; - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = mos7720_write(port, &stop_char, 1); + status = mos7720_write(tty, port, &stop_char, 1); if (status <= 0) return; } @@ -764,11 +762,11 @@ static void mos7720_throttle(struct usb_serial_port *port) } } -static void mos7720_unthrottle(struct usb_serial_port *port) +static void mos7720_unthrottle(struct tty_struct *tty) { - struct tty_struct *tty; - int status; + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + int status; if (mos7720_port == NULL) return; @@ -780,16 +778,10 @@ static void mos7720_unthrottle(struct usb_serial_port *port) dbg("%s: Entering ..........", __func__); - tty = port->tty; - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); - status = mos7720_write(port, &start_char, 1); + status = mos7720_write(tty, port, &start_char, 1); if (status <= 0) return; } @@ -819,9 +811,9 @@ static int set_higher_rates(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - /*********************************************** - * Init Sequence for higher rates - ***********************************************/ + /*********************************************** + * Init Sequence for higher rates + ***********************************************/ dbg("Sending Setting Commands .........."); port_number = port->number - port->serial->minor; @@ -832,7 +824,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port, data = 0x0CF; send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data); data = 0x00b; - mos7720_port->shadowMCR = data; + mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x00b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); @@ -843,12 +835,12 @@ static int set_higher_rates(struct moschip_port *mos7720_port, send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); - /*********************************************** - * Set for higher rates * - ***********************************************/ + /*********************************************** + * Set for higher rates * + ***********************************************/ data = baud * 0x10; - send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1,&data); + send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data); data = 0x003; send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data); @@ -856,34 +848,33 @@ static int set_higher_rates(struct moschip_port *mos7720_port, send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data); data = 0x02b; - mos7720_port->shadowMCR = data; + mos7720_port->shadowMCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); data = 0x02b; send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); - /*********************************************** - * Set DLL/DLM - ***********************************************/ + /*********************************************** + * Set DLL/DLM + ***********************************************/ data = mos7720_port->shadowLCR | UART_LCR_DLAB; - mos7720_port->shadowLCR = data; + mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); data = 0x001; /* DLL */ - send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); + send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data); data = 0x000; /* DLM */ - send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); + send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; - mos7720_port->shadowLCR = data; + mos7720_port->shadowLCR = data; send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data); return 0; } /* baud rate information */ -struct divisor_table_entry -{ +struct divisor_table_entry { __u32 baudrate; __u16 divisor; }; @@ -932,8 +923,8 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) } } - /* After trying for all the standard baud rates * - * Try calculating the divisor for this baud rate */ + /* After trying for all the standard baud rates * + * Try calculating the divisor for this baud rate */ if (baudrate > 75 && baudrate < 230400) { /* get the divisor */ custom = (__u16)(230400L / baudrate); @@ -945,7 +936,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) custom++; *divisor = custom; - dbg("Baud %d = %d",baudrate, custom); + dbg("Baud %d = %d", baudrate, custom); return 0; } @@ -979,29 +970,29 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, number = port->number - port->serial->minor; dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); - /* Calculate the Divisor */ + /* Calculate the Divisor */ status = calc_baud_rate_divisor(baudrate, &divisor); if (status) { err("%s - bad baud rate", __func__); return status; } - /* Enable access to divisor latch */ - data = mos7720_port->shadowLCR | UART_LCR_DLAB; - mos7720_port->shadowLCR = data; - send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data); + /* Enable access to divisor latch */ + data = mos7720_port->shadowLCR | UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data); /* Write the divisor */ data = ((unsigned char)(divisor & 0xff)); - send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data); + send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data); data = ((unsigned char)((divisor & 0xff00) >> 8)); - send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data); + send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data); - /* Disable access to divisor latch */ - data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; - mos7720_port->shadowLCR = data; - send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data); + /* Disable access to divisor latch */ + data = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + mos7720_port->shadowLCR = data; + send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data); return status; } @@ -1011,12 +1002,12 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, * This routine is called to set the UART on the device to match * the specified new settings. */ -static void change_port_settings(struct moschip_port *mos7720_port, +static void change_port_settings(struct tty_struct *tty, + struct moschip_port *mos7720_port, struct ktermios *old_termios) { struct usb_serial_port *port; struct usb_serial *serial; - struct tty_struct *tty; int baud; unsigned cflag; unsigned iflag; @@ -1042,8 +1033,6 @@ static void change_port_settings(struct moschip_port *mos7720_port, return; } - tty = mos7720_port->port->tty; - dbg("%s: Entering ..........", __func__); lData = UART_LCR_WLEN8; @@ -1106,29 +1095,31 @@ static void change_port_settings(struct moschip_port *mos7720_port, #define LCR_PAR_MASK 0x38 /* Mask for parity field */ /* Update the LCR with the correct value */ - mos7720_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7720_port->shadowLCR &= + ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); mos7720_port->shadowLCR |= (lData | lParity | lStop); /* Disable Interrupts */ data = 0x00; - send_mos_cmd(serial,MOS_WRITE,port->number - port->serial->minor, UART_IER, &data); + send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor, + UART_IER, &data); data = 0x00; - send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); data = 0xcf; - send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); + send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data); /* Send the updated LCR value to the mos7720 */ data = mos7720_port->shadowLCR; - send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data); + send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data); - data = 0x00b; - mos7720_port->shadowMCR = data; - send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); - data = 0x00b; - send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + mos7720_port->shadowMCR = data; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); + data = 0x00b; + send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data); /* set up the MCR register and send it to the mos7720 */ mos7720_port->shadowMCR = UART_MCR_OUT2; @@ -1137,9 +1128,8 @@ static void change_port_settings(struct moschip_port *mos7720_port, if (cflag & CRTSCTS) { mos7720_port->shadowMCR |= (UART_MCR_XONANY); - - /* To set hardware flow control to the specified * - * serial port, in SP1/2_CONTROL_REG */ + /* To set hardware flow control to the specified * + * serial port, in SP1/2_CONTROL_REG */ if (port->number) { data = 0x001; send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, @@ -1198,14 +1188,13 @@ static void change_port_settings(struct moschip_port *mos7720_port, * this function is called by the tty driver when it wants to change the * termios structure. */ -static void mos7720_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void mos7720_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { int status; unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7720_port; - struct tty_struct *tty; serial = port->serial; @@ -1214,15 +1203,12 @@ static void mos7720_set_termios(struct usb_serial_port *port, if (mos7720_port == NULL) return; - tty = port->tty; - - if (!mos7720_port->open) { dbg("%s - port not opened", __func__); return; } - dbg("%s\n","setting termios - ASPIRE"); + dbg("%s\n", "setting termios - ASPIRE"); cflag = tty->termios->c_cflag; @@ -1237,14 +1223,14 @@ static void mos7720_set_termios(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); /* change the port settings to the new ones specified */ - change_port_settings(mos7720_port, old_termios); + change_port_settings(tty, mos7720_port, old_termios); - if(!port->read_urb) { - dbg("%s","URB KILLED !!!!!\n"); + if (!port->read_urb) { + dbg("%s", "URB KILLED !!!!!\n"); return; } - if(port->read_urb->status != -EINPROGRESS) { + if (port->read_urb->status != -EINPROGRESS) { port->read_urb->dev = serial->dev; status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) @@ -1264,13 +1250,13 @@ static void mos7720_set_termios(struct usb_serial_port *port, * transmit holding register is empty. This functionality * allows an RS485 driver to be written in user space. */ -static int get_lsr_info(struct moschip_port *mos7720_port, - unsigned int __user *value) +static int get_lsr_info(struct tty_struct *tty, + struct moschip_port *mos7720_port, unsigned int __user *value) { int count; unsigned int result = 0; - count = mos7720_chars_in_buffer(mos7720_port->port); + count = mos7720_chars_in_buffer(tty); if (count == 0) { dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; @@ -1290,7 +1276,7 @@ static int get_number_bytes_avail(struct moschip_port *mos7720_port, unsigned int __user *value) { unsigned int result = 0; - struct tty_struct *tty = mos7720_port->port->tty; + struct tty_struct *tty = mos7720_port->port->port.tty; if (!tty) return -ENOIOCTLCMD; @@ -1316,7 +1302,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, if (mos7720_port == NULL) return -1; - port = (struct usb_serial_port*)mos7720_port->port; + port = (struct usb_serial_port *)mos7720_port->port; mcr = mos7720_port->shadowMCR; if (copy_from_user(&arg, value, sizeof(int))) @@ -1397,7 +1383,7 @@ static int get_serial_info(struct moschip_port *mos7720_port, tmp.port = mos7720_port->port->number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; tmp.baud_base = 9600; tmp.close_delay = 5*HZ; tmp.closing_wait = 30*HZ; @@ -1407,9 +1393,10 @@ static int get_serial_info(struct moschip_port *mos7720_port, return 0; } -static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, +static int mos7720_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; struct async_icount cnow; struct async_icount cprev; @@ -1431,14 +1418,16 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, case TIOCSERGETLSR: dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return get_lsr_info(mos7720_port, (unsigned int __user *)arg); + return get_lsr_info(tty, mos7720_port, + (unsigned int __user *)arg); return 0; + /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, - port->number); + dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", + __func__, port->number); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); @@ -1452,10 +1441,6 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); - case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); - break; - case TIOCMIWAIT: dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7720_port->icount; @@ -1469,7 +1454,7 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { return 0; } cprev = cnow; @@ -1492,7 +1477,7 @@ static int mos7720_ioctl(struct usb_serial_port *port, struct file *file, icount.buf_overrun = cnow.buf_overrun; dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount.rx, icount.tx ); + port->number, icount.rx, icount.tx); if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) return -EFAULT; return 0; @@ -1543,7 +1528,8 @@ static int mos7720_startup(struct usb_serial *serial) /* Initialize all port interrupt end point to port 0 int * endpoint. Our device has only one interrupt endpoint * comman to all ports */ - serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; + serial->port[i]->interrupt_in_endpointAddress = + serial->port[0]->interrupt_in_endpointAddress; mos7720_port->port = serial->port[i]; usb_set_serial_port_data(serial->port[i], mos7720_port); @@ -1555,13 +1541,15 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00,0x01,0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); - send_mos_cmd(serial,MOS_READ,0x00, UART_LSR, &data); // LSR For Port 1 - dbg("LSR:%x",data); + /* LSR For Port 1 */ + send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data); + dbg("LSR:%x", data); - send_mos_cmd(serial,MOS_READ,0x01, UART_LSR, &data); // LSR For Port 2 - dbg("LSR:%x",data); + /* LSR For Port 2 */ + send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data); + dbg("LSR:%x", data); return 0; } @@ -1571,7 +1559,7 @@ static void mos7720_shutdown(struct usb_serial *serial) int i; /* free private structure allocated for serial port */ - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) { kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } @@ -1651,8 +1639,8 @@ module_init(moschip7720_init); module_exit(moschip7720_exit); /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 78f2f6db494..09d82062b97 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -33,7 +33,7 @@ #include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> /* * Version Information @@ -82,8 +82,8 @@ * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */ -#define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ +#define WAIT_FOR_EVER (HZ * 0) /* timeout urb is wait for ever */ +#define MOS_WDR_TIMEOUT (HZ * 5) /* default urb timeout */ #define MOS_PORT1 0x0200 #define MOS_PORT2 0x0300 @@ -102,8 +102,8 @@ #define MAX_NAME_LEN 64 -#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58 -#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62 +#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ +#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ /* For higher baud Rates use TIOCEXBAUD */ #define TIOCEXBAUD 0x5462 @@ -142,7 +142,7 @@ #define MOS_MSR_DELTA_RI 0x40 #define MOS_MSR_DELTA_CD 0x80 -// Serial Port register Address +/* Serial Port register Address */ #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) #define FIFO_CONTROL_REGISTER ((__u16)(0x02)) #define LINE_CONTROL_REGISTER ((__u16)(0x03)) @@ -201,11 +201,11 @@ struct moschip_port { struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ - /*Offsets */ + /* Offsets */ __u8 SpRegOffset; __u8 ControlRegOffset; __u8 DcrRegOffset; - //for processing control URBS in interrupt context + /* for processing control URBS in interrupt context */ struct urb *control_urb; struct usb_ctrlrequest *dr; char *ctrl_buf; @@ -244,7 +244,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, */ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = port->serial->dev; int ret = 0; @@ -269,16 +269,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, struct usb_device *dev = port->serial->dev; val = val & 0x00ff; - // For the UART control registers, the application number need to be Or'ed + /* For the UART control registers, the application number need + to be Or'ed */ if (port->serial->num_ports == 4) { - val |= - (((__u16) port->number - (__u16) (port->serial->minor)) + - 1) << 8; + val |= (((__u16) port->number - + (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_set_uart_reg application number is %x\n", val); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - val |= - (((__u16) port->number - + val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_set_uart_reg application number is %x\n", val); @@ -302,14 +301,15 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, * by passing usb_rcvctrlpipe function as parameter. */ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = port->serial->dev; int ret = 0; __u16 Wval; - //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); - /*Wval is same as application number */ + /* dbg("application number is %4x \n", + (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */ + /* Wval is same as application number */ if (port->serial->num_ports == 4) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + @@ -317,14 +317,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, dbg("mos7840_get_uart_reg application number is %x\n", Wval); } else { if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { - Wval = - (((__u16) port->number - + Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; dbg("mos7840_get_uart_reg application number is %x\n", Wval); } else { - Wval = - (((__u16) port->number - + Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 2) << 8; dbg("mos7840_get_uart_reg application number is %x\n", Wval); @@ -406,11 +404,11 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) dbg("%s - %02x", __func__, new_lsr); if (new_lsr & SERIAL_LSR_BI) { - // - // Parity and Framing errors only count if they - // occur exclusive of a break being - // received. - // + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); } @@ -492,7 +490,7 @@ exit: } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, - __u16 * val) + __u16 *val) { struct usb_device *dev = mcs->port->serial->dev; struct usb_ctrlrequest *dr = mcs->dr; @@ -501,7 +499,7 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, dr->bRequestType = MCS_RD_RTYPE; dr->bRequest = MCS_RDREQ; - dr->wValue = cpu_to_le16(Wval); //0; + dr->wValue = cpu_to_le16(Wval); /* 0 */ dr->wIndex = cpu_to_le16(reg); dr->wLength = cpu_to_le16(2); @@ -607,7 +605,8 @@ static void mos7840_interrupt_callback(struct urb *urb) } } } - if (!(rv < 0)) /* the completion handler for the control urb will resubmit */ + if (!(rv < 0)) + /* the completion handler for the control urb will resubmit */ return; exit: result = usb_submit_urb(urb, GFP_ATOMIC); @@ -656,8 +655,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, if (!port || mos7840_port_paranoia_check(port, function) || mos7840_serial_paranoia_check(port->serial, function)) { - /* then say that we don't have a valid usb_serial thing, which will - * end up genrating -ENODEV return values */ + /* then say that we don't have a valid usb_serial thing, + * which will end up genrating -ENODEV return values */ return NULL; } @@ -710,7 +709,7 @@ static void mos7840_bulk_in_callback(struct urb *urb) dbg("%s", "Entering ........... \n"); if (urb->actual_length) { - tty = mos7840_port->port->tty; + tty = mos7840_port->port->port.tty; if (tty) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -741,8 +740,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) /***************************************************************************** * mos7840_bulk_out_data_callback - * this is the callback function for when we have finished sending serial data - * on the bulk out endpoint. + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. *****************************************************************************/ static void mos7840_bulk_out_data_callback(struct urb *urb) @@ -774,7 +773,7 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) dbg("%s \n", "Entering ........."); - tty = mos7840_port->port->tty; + tty = mos7840_port->port->port.tty; if (tty && mos7840_port->open) tty_wakeup(tty); @@ -804,7 +803,8 @@ static int mos7840_serial_probe(struct usb_serial *serial, * Otherwise we return a negative error number. *****************************************************************************/ -static int mos7840_open(struct usb_serial_port *port, struct file *filp) +static int mos7840_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int response; int j; @@ -847,7 +847,8 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) continue; } - urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); if (!urb->transfer_buffer) { usb_free_urb(urb); mos7840_port->write_urb_pool[j] = NULL; @@ -868,9 +869,8 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) * 0x08 : SP1/2 Control Reg *****************************************************************************/ -//NEED to check the following Block + /* NEED to check the following Block */ - status = 0; Data = 0x0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { @@ -890,36 +890,35 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) dbg("writing Spreg failed\n"); return -1; } -//End of block to be checked + /* End of block to be checked */ - status = 0; Data = 0x0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); if (status < 0) { dbg("Reading Controlreg failed\n"); return -1; } - Data |= 0x08; //Driver done bit - Data |= 0x20; //rx_disable - status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + Data |= 0x08; /* Driver done bit */ + Data |= 0x20; /* rx_disable */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); if (status < 0) { dbg("writing Controlreg failed\n"); return -1; } - //do register settings here - // Set all regs to the device default values. - //////////////////////////////////// - // First Disable all interrupts. - //////////////////////////////////// - + /* do register settings here */ + /* Set all regs to the device default values. */ + /*********************************** + * First Disable all interrupts. + ***********************************/ Data = 0x00; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dbg("disableing interrupts failed\n"); return -1; } - // Set FIFO_CONTROL_REGISTER to the default value + /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { @@ -946,90 +945,73 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; - Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 + Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); Data = 0x0c; - status = 0; status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); Data = 0x0; - status = 0; status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); Data = Data & ~SERIAL_LCR_DLAB; - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); mos7840_port->shadowLCR = Data; - //clearing Bulkin and Bulkout Fifo + /* clearing Bulkin and Bulkout Fifo */ Data = 0x0; - status = 0; status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); Data = Data | 0x0c; - status = 0; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); Data = Data & ~0x0c; - status = 0; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); - //Finally enable all interrupts - Data = 0x0; + /* Finally enable all interrupts */ Data = 0x0c; - status = 0; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - //clearing rx_disable + /* clearing rx_disable */ Data = 0x0; - status = 0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); Data = Data & ~0x20; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); - // rx_negate + /* rx_negate */ Data = 0x0; - status = 0; - status = - mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data); + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); Data = Data | 0x10; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); /* force low_latency on so that our tty_push actually forces * * the data through,otherwise it is scheduled, and with * * high data rates (like with OHCI) data can get lost. */ + if (tty) + tty->low_latency = 1; - if (port->tty) - port->tty->low_latency = 1; -/* Check to see if we've set up our endpoint info yet * - * (can't set it up in mos7840_startup as the structures * - * were not set up at that time.) */ + /* Check to see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the structures * + * were not set up at that time.) */ if (port0->open_ports == 1) { if (serial->port[0]->interrupt_in_buffer == NULL) { - /* set up interrupt urb */ - usb_fill_int_urb(serial->port[0]->interrupt_in_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - serial->port[0]-> - interrupt_in_endpointAddress), - serial->port[0]->interrupt_in_buffer, - serial->port[0]->interrupt_in_urb-> - transfer_buffer_length, - mos7840_interrupt_callback, - serial, - serial->port[0]->interrupt_in_urb-> - interval); + serial->dev, + usb_rcvintpipe(serial->dev, + serial->port[0]->interrupt_in_endpointAddress), + serial->port[0]->interrupt_in_buffer, + serial->port[0]->interrupt_in_urb-> + transfer_buffer_length, + mos7840_interrupt_callback, + serial, + serial->port[0]->interrupt_in_urb->interval); /* start interrupt read for mos7840 * * will continue as long as mos7840 is connected */ @@ -1084,14 +1066,16 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); /* initialize our port settings */ - mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ + /* Must set to enable ints! */ + mos7840_port->shadowMCR = MCR_MASTER_IE; /* send a open port command */ mos7840_port->open = 1; - //mos7840_change_port_settings(mos7840_port,old_termios); + /* mos7840_change_port_settings(mos7840_port,old_termios); */ mos7840_port->icount.tx = 0; mos7840_port->icount.rx = 0; - dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", serial, mos7840_port, port); + dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", + serial, mos7840_port, port); return 0; @@ -1104,11 +1088,12 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) * been written, but hasn't made it out the port yet) * If successful, we return the number of bytes left to be written in the * system, - * Otherwise we return a negative error number. + * Otherwise we return zero. *****************************************************************************/ -static int mos7840_chars_in_buffer(struct usb_serial_port *port) +static int mos7840_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int i; int chars = 0; unsigned long flags; @@ -1118,22 +1103,20 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); - return -1; + return 0; } mos7840_port = mos7840_get_port_private(port); if (mos7840_port == NULL) { dbg("%s \n", "mos7840_break:leaving ..........."); - return -1; + return 0; } - spin_lock_irqsave(&mos7840_port->pool_lock,flags); - for (i = 0; i < NUM_URBS; ++i) { - if (mos7840_port->busy[i]) { + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + for (i = 0; i < NUM_URBS; ++i) + if (mos7840_port->busy[i]) chars += URB_TRANSFER_BUFFER_SIZE; - } - } - spin_unlock_irqrestore(&mos7840_port->pool_lock,flags); + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); dbg("%s - returns %d", __func__, chars); return chars; @@ -1149,7 +1132,8 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ -static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) +static void mos7840_block_until_tx_empty(struct tty_struct *tty, + struct moschip_port *mos7840_port) { int timeout = HZ / 10; int wait = 30; @@ -1157,12 +1141,11 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) while (1) { - count = mos7840_chars_in_buffer(mos7840_port->port); + count = mos7840_chars_in_buffer(tty); /* Check for Buffer status */ - if (count <= 0) { + if (count <= 0) return; - } /* Block the thread for a while */ interruptible_sleep_on_timeout(&mos7840_port->wait_chase, @@ -1185,7 +1168,8 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void mos7840_close(struct usb_serial_port *port, struct file *filp) +static void mos7840_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1226,32 +1210,28 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) } } - if (serial->dev) { + if (serial->dev) /* flush and block until tx is empty */ - mos7840_block_until_tx_empty(mos7840_port); - } + mos7840_block_until_tx_empty(tty, mos7840_port); /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists */ if (serial->dev) { - if (mos7840_port->write_urb) { dbg("%s", "Shutdown bulk write\n"); usb_kill_urb(mos7840_port->write_urb); } - if (mos7840_port->read_urb) { dbg("%s", "Shutdown bulk read\n"); usb_kill_urb(mos7840_port->read_urb); } if ((&mos7840_port->control_urb)) { dbg("%s", "Shutdown control read\n"); - // usb_kill_urb (mos7840_port->control_urb); - + /*/ usb_kill_urb (mos7840_port->control_urb); */ } } -// if(mos7840_port->ctrl_buf != NULL) -// kfree(mos7840_port->ctrl_buf); +/* if(mos7840_port->ctrl_buf != NULL) */ +/* kfree(mos7840_port->ctrl_buf); */ port0->open_ports--; dbg("mos7840_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number); @@ -1264,10 +1244,8 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) if (mos7840_port->write_urb) { /* if this urb had a transfer buffer already (old tx) free it */ - - if (mos7840_port->write_urb->transfer_buffer != NULL) { + if (mos7840_port->write_urb->transfer_buffer != NULL) kfree(mos7840_port->write_urb->transfer_buffer); - } usb_free_urb(mos7840_port->write_urb); } @@ -1293,20 +1271,19 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) * ************************************************************************/ -static void mos7840_block_until_chase_response(struct moschip_port - *mos7840_port) +static void mos7840_block_until_chase_response(struct tty_struct *tty, + struct moschip_port *mos7840_port) { int timeout = 1 * HZ; int wait = 10; int count; while (1) { - count = mos7840_chars_in_buffer(mos7840_port->port); + count = mos7840_chars_in_buffer(tty); /* Check for Buffer status */ - if (count <= 0) { + if (count <= 0) return; - } /* Block the thread for a while */ interruptible_sleep_on_timeout(&mos7840_port->wait_chase, @@ -1328,8 +1305,9 @@ static void mos7840_block_until_chase_response(struct moschip_port * mos7840_break * this function sends a break to the port *****************************************************************************/ -static void mos7840_break(struct usb_serial_port *port, int break_state) +static void mos7840_break(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; unsigned char data; struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1350,21 +1328,17 @@ static void mos7840_break(struct usb_serial_port *port, int break_state) mos7840_port = mos7840_get_port_private(port); - if (mos7840_port == NULL) { + if (mos7840_port == NULL) return; - } - - if (serial->dev) { + if (serial->dev) /* flush and block until tx is empty */ - mos7840_block_until_chase_response(mos7840_port); - } + mos7840_block_until_chase_response(tty, mos7840_port); - if (break_state == -1) { + if (break_state == -1) data = mos7840_port->shadowLCR | LCR_SET_BREAK; - } else { + else data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; - } mos7840_port->shadowLCR = data; dbg("mcs7840_break mos7840_port->shadowLCR is %x\n", @@ -1383,8 +1357,9 @@ static void mos7840_break(struct usb_serial_port *port, int break_state) * Otherwise we return a negative error number. *****************************************************************************/ -static int mos7840_write_room(struct usb_serial_port *port) +static int mos7840_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int i; int room = 0; unsigned long flags; @@ -1406,9 +1381,8 @@ static int mos7840_write_room(struct usb_serial_port *port) spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (!mos7840_port->busy[i]) { + if (!mos7840_port->busy[i]) room += URB_TRANSFER_BUFFER_SIZE; - } } spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); @@ -1426,7 +1400,7 @@ static int mos7840_write_room(struct usb_serial_port *port) * return a negative error number. *****************************************************************************/ -static int mos7840_write(struct usb_serial_port *port, +static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count) { int status; @@ -1438,45 +1412,41 @@ static int mos7840_write(struct usb_serial_port *port, struct moschip_port *mos7840_port; struct usb_serial *serial; struct urb *urb; - //__u16 Data; + /* __u16 Data; */ const unsigned char *current_position = data; unsigned char *data1; dbg("%s \n", "entering ..........."); - //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR); + /* dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", + mos7840_port->shadowLCR); */ #ifdef NOTMOS7840 Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data); dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", mos7840_port->shadowLCR); - //Data = 0x03; - //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); - //mos7840_port->shadowLCR=Data;//Need to add later + /* Data = 0x03; */ + /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ + /* mos7840_port->shadowLCR=Data;//Need to add later */ - Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 - status = 0; + Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - //Data = 0x0c; - //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); + /* Data = 0x0c; */ + /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); dbg("mos7840_write:DLL value is %x\n", Data); Data = 0x0; - status = 0; status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); dbg("mos7840_write:DLM value is %x\n", Data); Data = Data & ~SERIAL_LCR_DLAB; dbg("mos7840_write: mos7840_port->shadowLCR is %x\n", mos7840_port->shadowLCR); - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); #endif @@ -1555,8 +1525,7 @@ static int mos7840_write(struct usb_serial_port *port, mos7840_port->icount.tx += transfer_size; smp_wmb(); dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); - exit: - +exit: return bytes_sent; } @@ -1567,10 +1536,10 @@ static int mos7840_write(struct usb_serial_port *port, * being read from the port. *****************************************************************************/ -static void mos7840_throttle(struct usb_serial_port *port) +static void mos7840_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7840_port; - struct tty_struct *tty; int status; if (mos7840_port_paranoia_check(port, __func__)) { @@ -1592,32 +1561,20 @@ static void mos7840_throttle(struct usb_serial_port *port) dbg("%s", "Entering .......... \n"); - tty = port->tty; - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); - status = mos7840_write(port, &stop_char, 1); - if (status <= 0) { + status = mos7840_write(tty, port, &stop_char, 1); + if (status <= 0) return; - } } - /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7840_port->shadowMCR &= ~MCR_RTS; - status = 0; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); - - if (status < 0) { + if (status < 0) return; - } } return; @@ -1625,12 +1582,13 @@ static void mos7840_throttle(struct usb_serial_port *port) /***************************************************************************** * mos7840_unthrottle - * this function is called by the tty driver when it wants to resume the data - * being read from the port (called after SerialThrottle is called) + * this function is called by the tty driver when it wants to resume + * the data being read from the port (called after mos7840_throttle is + * called) *****************************************************************************/ -static void mos7840_unthrottle(struct usb_serial_port *port) +static void mos7840_unthrottle(struct tty_struct *tty) { - struct tty_struct *tty; + struct usb_serial_port *port = tty->driver_data; int status; struct moschip_port *mos7840_port = mos7840_get_port_private(port); @@ -1649,43 +1607,32 @@ static void mos7840_unthrottle(struct usb_serial_port *port) dbg("%s", "Entering .......... \n"); - tty = port->tty; - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); - status = mos7840_write(port, &start_char, 1); - if (status <= 0) { + status = mos7840_write(tty, port, &start_char, 1); + if (status <= 0) return; - } } /* if we are implementing RTS/CTS, toggle that line */ if (tty->termios->c_cflag & CRTSCTS) { mos7840_port->shadowMCR |= MCR_RTS; - status = 0; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mos7840_port->shadowMCR); - if (status < 0) { + if (status < 0) return; - } } - - return; } -static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) +static int mos7840_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7840_port; unsigned int result; __u16 msr; __u16 mcr; - int status = 0; + int status; mos7840_port = mos7840_get_port_private(port); dbg("%s - port %d", __func__, port->number); @@ -1708,9 +1655,10 @@ static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file) return result; } -static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file, +static int mos7840_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7840_port; unsigned int mcr; int status; @@ -1755,7 +1703,7 @@ static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file, * baud rate. *****************************************************************************/ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, - __u16 * clk_sel_val) + __u16 *clk_sel_val) { dbg("%s - %d", __func__, baudRate); @@ -1807,9 +1755,8 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor, /* Check for round off */ round1 = (__u16) (2304000L / baudrate); round = (__u16) (round1 - (custom * 10)); - if (round > 4) { + if (round > 4) custom++; - } *divisor = custom; dbg(" Baud %d = %d\n", baudrate, custom); @@ -1857,16 +1804,15 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, dbg("%s - port = %d, baud = %d", __func__, mos7840_port->port->number, baudRate); - //reset clk_uart_sel in spregOffset + /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { #ifdef HW_flow_control - //NOTE: need to see the pther register to modify - //setting h/w flow control bit to 1; - status = 0; + /* NOTE: need to see the pther register to modify */ + /* setting h/w flow control bit to 1 */ Data = 0x2b; mos7840_port->shadowMCR = Data; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1875,12 +1821,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, } else { #ifdef HW_flow_control - //setting h/w flow control bit to 0; - status = 0; + / *setting h/w flow control bit to 0 */ Data = 0xb; mos7840_port->shadowMCR = Data; - status = - mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1889,25 +1834,20 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, } - if (1) //baudRate <= 115200) - { + if (1) { /* baudRate <= 115200) */ clk_sel_val = 0x0; Data = 0x0; - status = 0; - status = - mos7840_calc_baud_rate_divisor(baudRate, &divisor, + status = mos7840_calc_baud_rate_divisor(baudRate, &divisor, &clk_sel_val); - status = - mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, - &Data); + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, + &Data); if (status < 0) { dbg("reading spreg failed in set_serial_baud\n"); return -1; } Data = (Data & 0x8f) | clk_sel_val; - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, + Data); if (status < 0) { dbg("Writing spreg failed in set_serial_baud\n"); return -1; @@ -1939,7 +1879,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); } - return status; } @@ -1949,10 +1888,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, * the specified new settings. *****************************************************************************/ -static void mos7840_change_port_settings(struct moschip_port *mos7840_port, - struct ktermios *old_termios) +static void mos7840_change_port_settings(struct tty_struct *tty, + struct moschip_port *mos7840_port, struct ktermios *old_termios) { - struct tty_struct *tty; int baud; unsigned cflag; unsigned iflag; @@ -1988,8 +1926,6 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, return; } - tty = mos7840_port->port->tty; - dbg("%s", "Entering .......... \n"); lData = LCR_BITS_8; @@ -2033,9 +1969,8 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, dbg("%s - parity = none", __func__); } - if (cflag & CMSPAR) { + if (cflag & CMSPAR) lParity = lParity | 0x20; - } /* Change the Stop bit */ if (cflag & CSTOPB) { @@ -2077,16 +2012,13 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, /* set up the MCR register and send it to the mos7840 */ mos7840_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) { + if (cflag & CBAUD) mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); - } - if (cflag & CRTSCTS) { + if (cflag & CRTSCTS) mos7840_port->shadowMCR |= (MCR_XON_ANY); - - } else { + else mos7840_port->shadowMCR &= ~(MCR_XON_ANY); - } Data = mos7840_port->shadowMCR; mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); @@ -2131,14 +2063,14 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, * the termios structure *****************************************************************************/ -static void mos7840_set_termios(struct usb_serial_port *port, +static void mos7840_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { int status; unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7840_port; - struct tty_struct *tty; dbg("mos7840_set_termios: START\n"); if (mos7840_port_paranoia_check(port, __func__)) { dbg("%s", "Invalid port \n"); @@ -2157,8 +2089,6 @@ static void mos7840_set_termios(struct usb_serial_port *port, if (mos7840_port == NULL) return; - tty = port->tty; - if (!mos7840_port->open) { dbg("%s - port not opened", __func__); return; @@ -2176,7 +2106,7 @@ static void mos7840_set_termios(struct usb_serial_port *port, /* change the port settings to the new ones specified */ - mos7840_change_port_settings(mos7840_port, old_termios); + mos7840_change_port_settings(tty, mos7840_port, old_termios); if (!mos7840_port->read_urb) { dbg("%s", "URB KILLED !!!!!\n"); @@ -2205,13 +2135,13 @@ static void mos7840_set_termios(struct usb_serial_port *port, * allows an RS485 driver to be written in user space. *****************************************************************************/ -static int mos7840_get_lsr_info(struct moschip_port *mos7840_port, +static int mos7840_get_lsr_info(struct tty_struct *tty, unsigned int __user *value) { int count; unsigned int result = 0; - count = mos7840_chars_in_buffer(mos7840_port->port); + count = mos7840_chars_in_buffer(tty); if (count == 0) { dbg("%s -- Empty", __func__); result = TIOCSER_TEMT; @@ -2227,6 +2157,8 @@ static int mos7840_get_lsr_info(struct moschip_port *mos7840_port, * function to set modem info *****************************************************************************/ +/* FIXME: Should be using the model control hooks */ + static int mos7840_set_modem_info(struct moschip_port *mos7840_port, unsigned int cmd, unsigned int __user *value) { @@ -2282,7 +2214,6 @@ static int mos7840_set_modem_info(struct moschip_port *mos7840_port, mos7840_port->shadowMCR = mcr; Data = mos7840_port->shadowMCR; - status = 0; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); if (status < 0) { dbg("setting MODEM_CONTROL_REGISTER Failed\n"); @@ -2303,10 +2234,8 @@ static int mos7840_get_modem_info(struct moschip_port *mos7840_port, unsigned int result = 0; __u16 msr; unsigned int mcr = mos7840_port->shadowMCR; - int status = 0; - status = - mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER, - &msr); + mos7840_get_uart_reg(mos7840_port->port, + MODEM_STATUS_REGISTER, &msr); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ @@ -2359,12 +2288,12 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port, * this function handles any ioctl calls to the driver *****************************************************************************/ -static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, +static int mos7840_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; void __user *argp = (void __user *)arg; struct moschip_port *mos7840_port; - struct tty_struct *tty; struct async_icount cnow; struct async_icount cprev; @@ -2381,8 +2310,6 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, if (mos7840_port == NULL) return -1; - tty = mos7840_port->port->tty; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); switch (cmd) { @@ -2390,9 +2317,10 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, case TIOCSERGETLSR: dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return mos7840_get_lsr_info(mos7840_port, argp); + return mos7840_get_lsr_info(tty, argp); return 0; + /* FIXME: use the modem hooks and remove this */ case TIOCMBIS: case TIOCMBIC: case TIOCMSET: @@ -2418,7 +2346,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, dbg("%s (%d) TIOCMIWAIT", __func__, port->number); cprev = mos7840_port->icount; while (1) { - //interruptible_sleep_on(&mos7840_port->delta_msr_wait); + /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ mos7840_port->delta_msr_cond = 0; wait_event_interruptible(mos7840_port->delta_msr_wait, (mos7840_port-> @@ -2463,13 +2391,9 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, if (copy_to_user(argp, &icount, sizeof(icount))) return -EFAULT; return 0; - - case TIOCEXBAUD: - return 0; default: break; } - return -ENOIOCTLCMD; } @@ -2527,8 +2451,9 @@ static int mos7840_startup(struct usb_serial *serial) goto error; } - /* Initialize all port interrupt end point to port 0 int endpoint * - * Our device has only one interrupt end point comman to all port */ + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt end point + * common to all port */ mos7840_port->port = serial->port[i]; mos7840_set_port_private(serial->port[i], mos7840_port); @@ -2564,27 +2489,23 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->DcrRegOffset = 0x1c; } mos7840_dump_serial_port(mos7840_port); - mos7840_set_port_private(serial->port[i], mos7840_port); - //enable rx_disable bit in control register - - status = - mos7840_get_reg_sync(serial->port[i], - mos7840_port->ControlRegOffset, &Data); + /* enable rx_disable bit in control register */ + status = mos7840_get_reg_sync(serial->port[i], + mos7840_port->ControlRegOffset, &Data); if (status < 0) { dbg("Reading ControlReg failed status-0x%x\n", status); break; } else dbg("ControlReg Reading success val is %x, status%d\n", Data, status); - Data |= 0x08; //setting driver done bit - Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg + Data |= 0x08; /* setting driver done bit */ + Data |= 0x04; /* sp1_bit to have cts change reflect in + modem status reg */ - //Data |= 0x20; //rx_disable bit - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], + /* Data |= 0x20; //rx_disable bit */ + status = mos7840_set_reg_sync(serial->port[i], mos7840_port->ControlRegOffset, Data); if (status < 0) { dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status); @@ -2593,13 +2514,11 @@ static int mos7840_startup(struct usb_serial *serial) dbg("ControlReg Writing success(rx_disable) status%d\n", status); - //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3 + /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 + and 0x24 in DCR3 */ Data = 0x01; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 0), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 0), Data); if (status < 0) { dbg("Writing DCR0 failed status-0x%x\n", status); break; @@ -2607,11 +2526,8 @@ static int mos7840_startup(struct usb_serial *serial) dbg("DCR0 Writing success status%d\n", status); Data = 0x05; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 1), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 1), Data); if (status < 0) { dbg("Writing DCR1 failed status-0x%x\n", status); break; @@ -2619,22 +2535,17 @@ static int mos7840_startup(struct usb_serial *serial) dbg("DCR1 Writing success status%d\n", status); Data = 0x24; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], - (__u16) (mos7840_port->DcrRegOffset + - 2), Data); + status = mos7840_set_reg_sync(serial->port[i], + (__u16) (mos7840_port->DcrRegOffset + 2), Data); if (status < 0) { dbg("Writing DCR2 failed status-0x%x\n", status); break; } else dbg("DCR2 Writing success status%d\n", status); - // write values in clkstart0x0 and clkmulti 0x20 + /* write values in clkstart0x0 and clkmulti 0x20 */ Data = 0x0; - status = 0; - status = - mos7840_set_reg_sync(serial->port[i], + status = mos7840_set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, Data); if (status < 0) { dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); @@ -2643,9 +2554,8 @@ static int mos7840_startup(struct usb_serial *serial) dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; - status = - mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, - Data); + status = mos7840_set_reg_sync(serial->port[i], + CLK_MULTI_REGISTER, Data); if (status < 0) { dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); @@ -2654,11 +2564,10 @@ static int mos7840_startup(struct usb_serial *serial) dbg("CLK_MULTI_REGISTER Writing success status%d\n", status); - //write value 0x0 to scratchpad register + /* write value 0x0 to scratchpad register */ Data = 0x00; - status = - mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, - Data); + status = mos7840_set_uart_reg(serial->port[i], + SCRATCH_PAD_REGISTER, Data); if (status < 0) { dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); @@ -2667,21 +2576,17 @@ static int mos7840_startup(struct usb_serial *serial) dbg("SCRATCH_PAD_REGISTER Writing success status%d\n", status); - //Zero Length flag register + /* Zero Length flag register */ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { Data = 0xff; - status = 0; status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16) - mos7840_port-> - port_num)), - Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num)), Data); dbg("ZLIP offset%x\n", (__u16) (ZLP_REG1 + - ((__u16) mos7840_port->port_num))); + ((__u16) mos7840_port->port_num))); if (status < 0) { dbg("Writing ZLP_REG%d failed status-0x%x\n", i + 2, status); @@ -2691,13 +2596,9 @@ static int mos7840_startup(struct usb_serial *serial) i + 2, status); } else { Data = 0xff; - status = 0; status = mos7840_set_reg_sync(serial->port[i], - (__u16) (ZLP_REG1 + - ((__u16) - mos7840_port-> - port_num) - - 0x1), Data); + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num) - 0x1), Data); dbg("ZLIP offset%x\n", (__u16) (ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); @@ -2712,14 +2613,16 @@ static int mos7840_startup(struct usb_serial *serial) } mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); - if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) { + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || + !mos7840_port->dr) { status = -ENOMEM; goto error; } } - //Zero Length flag enable + /* Zero Length flag enable */ Data = 0x0f; status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { @@ -2762,7 +2665,7 @@ static void mos7840_shutdown(struct usb_serial *serial) return; } - /* check for the ports to be closed,close the ports and disconnect */ + /* check for the ports to be closed,close the ports and disconnect */ /* free private structure allocated for serial port * * stop reads and writes on all ports */ @@ -2843,20 +2746,12 @@ static int __init moschip7840_init(void) /* Register with the usb */ retval = usb_register(&io_driver); - - if (retval) - goto failed_usb_register; - if (retval == 0) { dbg("%s\n", "Leaving..."); return 0; } - - failed_usb_register: usb_serial_deregister(&moschip7840_4port_device); - - failed_port_device_register: - +failed_port_device_register: return retval; } diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 43c8894353b..d6736531a0f 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -64,7 +64,7 @@ static void navman_read_int_callback(struct urb *urb) usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -79,7 +79,8 @@ exit: __func__, result); } -static int navman_open(struct usb_serial_port *port, struct file *filp) +static int navman_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int result = 0; @@ -96,14 +97,15 @@ static int navman_open(struct usb_serial_port *port, struct file *filp) return result; } -static void navman_close(struct usb_serial_port *port, struct file *filp) +static void navman_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->interrupt_in_urb); } -static int navman_write(struct usb_serial_port *port, +static int navman_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 7b7422f4947..ae8e227f3db 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -5,26 +5,28 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * Please report both successes and troubles to the author at omninet@kroah.com - * + * * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (08/28/2000) gkh * Added locks for SMP safeness. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more * than once. * Fixed potential race in omninet_write_bulk_callback * @@ -43,7 +45,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -58,25 +60,29 @@ static int debug; #define ZYXEL_VENDOR_ID 0x0586 #define ZYXEL_OMNINET_ID 0x1000 -#define BT_IGNITIONPRO_ID 0x2000 /* This one seems to be a re-branded ZyXEL device */ +/* This one seems to be a re-branded ZyXEL device */ +#define BT_IGNITIONPRO_ID 0x2000 /* function prototypes */ -static int omninet_open (struct usb_serial_port *port, struct file *filp); -static void omninet_close (struct usb_serial_port *port, struct file *filp); -static void omninet_read_bulk_callback (struct urb *urb); -static void omninet_write_bulk_callback (struct urb *urb); -static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int omninet_write_room (struct usb_serial_port *port); -static void omninet_shutdown (struct usb_serial *serial); -static int omninet_attach (struct usb_serial *serial); - -static struct usb_device_id id_table [] = { +static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void omninet_read_bulk_callback(struct urb *urb); +static void omninet_write_bulk_callback(struct urb *urb); +static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int omninet_write_room(struct tty_struct *tty); +static void omninet_shutdown(struct usb_serial *serial); +static int omninet_attach(struct usb_serial *serial); + +static struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver omninet_driver = { .name = "omninet", @@ -130,34 +136,34 @@ static struct usb_serial_driver zyxel_omninet_device = { * */ -struct omninet_header -{ +struct omninet_header { __u8 oh_seq; __u8 oh_len; __u8 oh_xxx; __u8 oh_pad; }; -struct omninet_data -{ - __u8 od_outseq; // Sequence number for bulk_out URBs +struct omninet_data { + __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; -static int omninet_attach (struct usb_serial *serial) +static int omninet_attach(struct usb_serial *serial) { struct omninet_data *od; struct usb_serial_port *port = serial->port[0]; - od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL ); - if( !od ) { - err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct omninet_data)); + od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); + if (!od) { + err("%s- kmalloc(%Zd) failed.", + __func__, sizeof(struct omninet_data)); return -ENOMEM; } usb_set_serial_port_data(port, od); return 0; } -static int omninet_open (struct usb_serial_port *port, struct file *filp) +static int omninet_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; @@ -166,22 +172,24 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __func__, port->number); wport = serial->port[1]; - wport->tty = port->tty; + wport->port.tty = tty; /* FIXME */ /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - omninet_read_bulk_callback, port); + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + omninet_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) { - err("%s - failed submitting read urb, error %d", __func__, result); - } - + if (result) + err("%s - failed submitting read urb, error %d", + __func__, result); return result; } -static void omninet_close (struct usb_serial_port *port, struct file * filp) +static void omninet_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); @@ -192,14 +200,14 @@ static void omninet_close (struct usb_serial_port *port, struct file * filp) #define OMNINET_HEADERLEN sizeof(struct omninet_header) #define OMNINET_BULKOUTSIZE (64 - OMNINET_HEADERLEN) -static void omninet_read_bulk_callback (struct urb *urb) +static void omninet_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; struct omninet_header *header = (struct omninet_header *) &data[0]; int status = urb->status; - int i; int result; + int i; dbg("%s - port %d", __func__, port->number); @@ -209,42 +217,46 @@ static void omninet_read_bulk_callback (struct urb *urb) return; } - if ((debug) && (header->oh_xxx != 0x30)) { + if (debug && header->oh_xxx != 0x30) { if (urb->actual_length) { - printk (KERN_DEBUG __FILE__ ": omninet_read %d: ", header->oh_len); - for (i = 0; i < (header->oh_len + OMNINET_HEADERLEN); i++) { - printk ("%.2x ", data[i]); - } - printk ("\n"); + printk(KERN_DEBUG __FILE__ + ": omninet_read %d: ", header->oh_len); + for (i = 0; i < (header->oh_len + + OMNINET_HEADERLEN); i++) + printk("%.2x ", data[i]); + printk("\n"); } } if (urb->actual_length && header->oh_len) { - for (i = 0; i < header->oh_len; i++) { - tty_insert_flip_char(port->tty, data[OMNINET_DATAOFFSET + i], 0); - } - tty_flip_buffer_push(port->tty); + tty_insert_flip_string(port->port.tty, + data + OMNINET_DATAOFFSET, header->oh_len); + tty_flip_buffer_push(port->port.tty); } /* Continue trying to always read */ - usb_fill_bulk_urb(urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress), - urb->transfer_buffer, urb->transfer_buffer_length, - omninet_read_bulk_callback, port); + usb_fill_bulk_urb(urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + urb->transfer_buffer, urb->transfer_buffer_length, + omninet_read_bulk_callback, port); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); return; } -static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { - struct usb_serial *serial = port->serial; - struct usb_serial_port *wport = serial->port[1]; + struct usb_serial *serial = port->serial; + struct usb_serial_port *wport = serial->port[1]; - struct omninet_data *od = usb_get_serial_port_data(port); - struct omninet_header *header = (struct omninet_header *) wport->write_urb->transfer_buffer; + struct omninet_data *od = usb_get_serial_port_data(port); + struct omninet_header *header = (struct omninet_header *) + wport->write_urb->transfer_buffer; int result; @@ -252,7 +264,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf if (count == 0) { dbg("%s - write request of 0 bytes", __func__); - return (0); + return 0; } spin_lock_bh(&wport->lock); @@ -266,9 +278,11 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count; - memcpy (wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count); + memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, + buf, count); - usb_serial_debug_data(debug, &port->dev, __func__, count, wport->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, + wport->write_urb->transfer_buffer); header->oh_seq = od->od_outseq++; header->oh_len = count; @@ -282,7 +296,8 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { wport->write_urb_busy = 0; - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); } else result = count; @@ -290,8 +305,9 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf } -static int omninet_write_room (struct usb_serial_port *port) +static int omninet_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; struct usb_serial_port *wport = serial->port[1]; @@ -303,12 +319,13 @@ static int omninet_write_room (struct usb_serial_port *port) dbg("%s - returns %d", __func__, room); - return (room); + return room; } -static void omninet_write_bulk_callback (struct urb *urb) +static void omninet_write_bulk_callback(struct urb *urb) { -/* struct omninet_header *header = (struct omninet_header *) urb->transfer_buffer; */ +/* struct omninet_header *header = (struct omninet_header *) + urb->transfer_buffer; */ struct usb_serial_port *port = urb->context; int status = urb->status; @@ -325,18 +342,18 @@ static void omninet_write_bulk_callback (struct urb *urb) } -static void omninet_shutdown (struct usb_serial *serial) +static void omninet_shutdown(struct usb_serial *serial) { struct usb_serial_port *wport = serial->port[1]; struct usb_serial_port *port = serial->port[0]; - dbg ("%s", __func__); + dbg("%s", __func__); usb_kill_urb(wport->write_urb); kfree(usb_get_serial_port_data(port)); } -static int __init omninet_init (void) +static int __init omninet_init(void) { int retval; retval = usb_serial_register(&zyxel_omninet_device); @@ -354,18 +371,18 @@ failed_usb_serial_register: } -static void __exit omninet_exit (void) +static void __exit omninet_exit(void) { - usb_deregister (&omninet_driver); - usb_serial_deregister (&zyxel_omninet_device); + usb_deregister(&omninet_driver); + usb_serial_deregister(&zyxel_omninet_device); } module_init(omninet_init); module_exit(omninet_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a73420dd052..e4eca95f2b0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -43,29 +43,25 @@ #include <linux/usb/serial.h> /* Function prototypes */ -static int option_open(struct usb_serial_port *port, struct file *filp); -static void option_close(struct usb_serial_port *port, struct file *filp); +static int option_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void option_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); static int option_startup(struct usb_serial *serial); static void option_shutdown(struct usb_serial *serial); -static void option_rx_throttle(struct usb_serial_port *port); -static void option_rx_unthrottle(struct usb_serial_port *port); -static int option_write_room(struct usb_serial_port *port); +static int option_write_room(struct tty_struct *tty); static void option_instat_callback(struct urb *urb); -static int option_write(struct usb_serial_port *port, +static int option_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); - -static int option_chars_in_buffer(struct usb_serial_port *port); -static int option_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg); -static void option_set_termios(struct usb_serial_port *port, - struct ktermios *old); -static void option_break_ctl(struct usb_serial_port *port, int break_state); -static int option_tiocmget(struct usb_serial_port *port, struct file *file); -static int option_tiocmset(struct usb_serial_port *port, struct file *file, +static int option_chars_in_buffer(struct tty_struct *tty); +static void option_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int option_tiocmget(struct tty_struct *tty, struct file *file); +static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int option_send_setup(struct usb_serial_port *port); +static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); /* Vendor and product IDs */ #define OPTION_VENDOR_ID 0x0AF0 @@ -173,6 +169,7 @@ static int option_send_setup(struct usb_serial_port *port); #define DELL_VENDOR_ID 0x413C #define KYOCERA_VENDOR_ID 0x0c88 +#define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a #define ANYDATA_VENDOR_ID 0x16d5 @@ -305,6 +302,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ @@ -340,11 +338,7 @@ static struct usb_serial_driver option_1port_device = { .write = option_write, .write_room = option_write_room, .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .ioctl = option_ioctl, .set_termios = option_set_termios, - .break_ctl = option_break_ctl, .tiocmget = option_tiocmget, .tiocmset = option_tiocmset, .attach = option_startup, @@ -401,47 +395,32 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_1port_device); + usb_serial_deregister(&option_1port_device); failed_1port_device_register: return retval; } static void __exit option_exit(void) { - usb_deregister (&option_driver); - usb_serial_deregister (&option_1port_device); + usb_deregister(&option_driver); + usb_serial_deregister(&option_1port_device); } module_init(option_init); module_exit(option_exit); -static void option_rx_throttle(struct usb_serial_port *port) -{ - dbg("%s", __func__); -} - -static void option_rx_unthrottle(struct usb_serial_port *port) -{ - dbg("%s", __func__); -} - -static void option_break_ctl(struct usb_serial_port *port, int break_state) -{ - /* Unfortunately, I don't know how to send a break */ - dbg("%s", __func__); -} - -static void option_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void option_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s", __func__); /* Doesn't support option setting */ - tty_termios_copy_hw(port->tty->termios, old_termios); - option_send_setup(port); + tty_termios_copy_hw(tty->termios, old_termios); + option_send_setup(tty, port); } -static int option_tiocmget(struct usb_serial_port *port, struct file *file) +static int option_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; unsigned int value; struct option_port_private *portdata; @@ -457,9 +436,10 @@ static int option_tiocmget(struct usb_serial_port *port, struct file *file) return value; } -static int option_tiocmset(struct usb_serial_port *port, struct file *file, +static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct option_port_private *portdata; portdata = usb_get_serial_port_data(port); @@ -474,17 +454,11 @@ static int option_tiocmset(struct usb_serial_port *port, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return option_send_setup(port); -} - -static int option_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; + return option_send_setup(tty, port); } /* Write */ -static int option_write(struct usb_serial_port *port, +static int option_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct option_port_private *portdata; @@ -499,7 +473,7 @@ static int option_write(struct usb_serial_port *port, i = 0; left = count; - for (i=0; left > 0 && i < N_OUT_URB; i++) { + for (i = 0; left > 0 && i < N_OUT_URB; i++) { todo = left; if (todo > OUT_BUFLEN) todo = OUT_BUFLEN; @@ -520,7 +494,7 @@ static int option_write(struct usb_serial_port *port, usb_pipeendpoint(this_urb->pipe), i); /* send the data */ - memcpy (this_urb->transfer_buffer, buf, todo); + memcpy(this_urb->transfer_buffer, buf, todo); this_urb->transfer_buffer_length = todo; this_urb->dev = port->serial->dev; @@ -560,7 +534,7 @@ static void option_indat_callback(struct urb *urb) dbg("%s: nonzero status: %d on endpoint %02x.", __func__, status, endpoint); } else { - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -570,7 +544,7 @@ static void option_indat_callback(struct urb *urb) } /* Resubmit urb so we continue receiving */ - if (port->open_count && status != -ESHUTDOWN) { + if (port->port.count && status != -ESHUTDOWN) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) printk(KERN_ERR "%s: resubmit read urb failed. " @@ -611,7 +585,7 @@ static void option_instat_callback(struct urb *urb) struct usb_serial *serial = port->serial; dbg("%s", __func__); - dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata); + dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata); if (status == 0) { struct usb_ctrlrequest *req_pkt = @@ -636,12 +610,12 @@ static void option_instat_callback(struct urb *urb) portdata->dsr_state = ((signals & 0x02) ? 1 : 0); portdata->ri_state = ((signals & 0x08) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) && + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state && !portdata->dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); } else { dbg("%s: type %x req %x", __func__, - req_pkt->bRequestType,req_pkt->bRequest); + req_pkt->bRequestType, req_pkt->bRequest); } } else dbg("%s: error %d", __func__, status); @@ -656,8 +630,9 @@ static void option_instat_callback(struct urb *urb) } } -static int option_write_room(struct usb_serial_port *port) +static int option_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct option_port_private *portdata; int i; int data_len = 0; @@ -666,7 +641,7 @@ static int option_write_room(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - for (i=0; i < N_OUT_URB; i++) { + for (i = 0; i < N_OUT_URB; i++) { this_urb = portdata->out_urbs[i]; if (this_urb && !test_bit(i, &portdata->out_busy)) data_len += OUT_BUFLEN; @@ -676,8 +651,9 @@ static int option_write_room(struct usb_serial_port *port) return data_len; } -static int option_chars_in_buffer(struct usb_serial_port *port) +static int option_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct option_port_private *portdata; int i; int data_len = 0; @@ -685,7 +661,7 @@ static int option_chars_in_buffer(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - for (i=0; i < N_OUT_URB; i++) { + for (i = 0; i < N_OUT_URB; i++) { this_urb = portdata->out_urbs[i]; /* FIXME: This locking is insufficient as this_urb may go unused during the test */ @@ -696,7 +672,8 @@ static int option_chars_in_buffer(struct usb_serial_port *port) return data_len; } -static int option_open(struct usb_serial_port *port, struct file *filp) +static int option_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct option_port_private *portdata; struct usb_serial *serial = port->serial; @@ -714,7 +691,7 @@ static int option_open(struct usb_serial_port *port, struct file *filp) /* Reset low level data toggle and start reading from endpoints */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; - if (! urb) + if (!urb) continue; if (urb->dev != serial->dev) { dbg("%s: dev %p != %p", __func__, @@ -739,21 +716,23 @@ static int option_open(struct usb_serial_port *port, struct file *filp) /* Reset low level data toggle on out endpoints */ for (i = 0; i < N_OUT_URB; i++) { urb = portdata->out_urbs[i]; - if (! urb) + if (!urb) continue; urb->dev = serial->dev; /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ } - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; - option_send_setup(port); + option_send_setup(tty, port); - return (0); + return 0; } -static void option_close(struct usb_serial_port *port, struct file *filp) +static void option_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int i; struct usb_serial *serial = port->serial; @@ -768,7 +747,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp) if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) - option_send_setup(port); + option_send_setup(tty, port); mutex_unlock(&serial->disc_mutex); /* Stop reading/writing urbs */ @@ -777,7 +756,7 @@ static void option_close(struct usb_serial_port *port, struct file *filp) for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); } - port->tty = NULL; + port->port.tty = NULL; /* FIXME */ } /* Helper functions used by option_setup_urbs */ @@ -807,7 +786,7 @@ static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint, /* Setup urbs */ static void option_setup_urbs(struct usb_serial *serial) { - int i,j; + int i, j; struct usb_serial_port *port; struct option_port_private *portdata; @@ -817,18 +796,22 @@ static void option_setup_urbs(struct usb_serial *serial) port = serial->port[i]; portdata = usb_get_serial_port_data(port); - /* Do indat endpoints first */ + /* Do indat endpoints first */ for (j = 0; j < N_IN_URB; ++j) { - portdata->in_urbs[j] = option_setup_urb (serial, - port->bulk_in_endpointAddress, USB_DIR_IN, port, - portdata->in_buffer[j], IN_BUFLEN, option_indat_callback); + portdata->in_urbs[j] = option_setup_urb(serial, + port->bulk_in_endpointAddress, + USB_DIR_IN, port, + portdata->in_buffer[j], + IN_BUFLEN, option_indat_callback); } /* outdat endpoints */ for (j = 0; j < N_OUT_URB; ++j) { - portdata->out_urbs[j] = option_setup_urb (serial, - port->bulk_out_endpointAddress, USB_DIR_OUT, port, - portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback); + portdata->out_urbs[j] = option_setup_urb(serial, + port->bulk_out_endpointAddress, + USB_DIR_OUT, port, + portdata->out_buffer[j], + OUT_BUFLEN, option_outdat_callback); } } } @@ -839,7 +822,8 @@ static void option_setup_urbs(struct usb_serial *serial) * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN * CDC. */ -static int option_send_setup(struct usb_serial_port *port) +static int option_send_setup(struct tty_struct *tty, + struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct option_port_private *portdata; @@ -848,7 +832,7 @@ static int option_send_setup(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - if (port->tty) { + if (tty) { int val = 0; if (portdata->dtr_state) val |= 0x01; @@ -856,10 +840,9 @@ static int option_send_setup(struct usb_serial_port *port) val |= 0x02; return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT); + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); } - return 0; } @@ -879,7 +862,7 @@ static int option_startup(struct usb_serial *serial) if (!portdata) { dbg("%s: kmalloc for option_port_private (%d) failed!.", __func__, i); - return (1); + return 1; } for (j = 0; j < N_IN_URB; j++) { @@ -898,17 +881,15 @@ static int option_startup(struct usb_serial *serial) usb_set_serial_port_data(port, portdata); - if (! port->interrupt_in_urb) + if (!port->interrupt_in_urb) continue; err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (err) dbg("%s: submit irq_in urb failed %d", __func__, err); } - option_setup_urbs(serial); - - return (0); + return 0; bail_out_error2: for (j = 0; j < N_OUT_URB; j++) @@ -947,7 +928,8 @@ static void option_shutdown(struct usb_serial *serial) for (j = 0; j < N_IN_URB; j++) { if (portdata->in_urbs[j]) { usb_free_urb(portdata->in_urbs[j]); - free_page((unsigned long)portdata->in_buffer[j]); + free_page((unsigned long) + portdata->in_buffer[j]); portdata->in_urbs[j] = NULL; } } diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index a9625c180dc..81db5715ee2 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -25,7 +25,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * TODO: * - implement correct flushing for ioctls and oti6858_close() @@ -49,7 +50,7 @@ #include <linux/spinlock.h> #include <linux/usb.h> #include <linux/usb/serial.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "oti6858.h" #define OTI6858_DESCRIPTION \ @@ -135,27 +136,28 @@ struct oti6858_control_pkt { #define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt) #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \ - ( ((a)->divisor == (priv)->pending_setup.divisor) \ + (((a)->divisor == (priv)->pending_setup.divisor) \ && ((a)->control == (priv)->pending_setup.control) \ - && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) ) + && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt)) /* function prototypes */ -static int oti6858_open(struct usb_serial_port *port, struct file *filp); -static void oti6858_close(struct usb_serial_port *port, struct file *filp); -static void oti6858_set_termios(struct usb_serial_port *port, - struct ktermios *old); -static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, +static int oti6858_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void oti6858_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void oti6858_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int oti6858_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); static void oti6858_write_bulk_callback(struct urb *urb); -static int oti6858_write(struct usb_serial_port *port, +static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -static int oti6858_write_room(struct usb_serial_port *port); -static void oti6858_break_ctl(struct usb_serial_port *port, int break_state); -static int oti6858_chars_in_buffer(struct usb_serial_port *port); -static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file); -static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, +static int oti6858_write_room(struct tty_struct *tty); +static int oti6858_chars_in_buffer(struct tty_struct *tty); +static int oti6858_tiocmget(struct tty_struct *tty, struct file *file); +static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int oti6858_startup(struct usb_serial *serial); static void oti6858_shutdown(struct usb_serial *serial); @@ -184,7 +186,6 @@ static struct usb_serial_driver oti6858_device = { .close = oti6858_close, .write = oti6858_write, .ioctl = oti6858_ioctl, - .break_ctl = oti6858_break_ctl, .set_termios = oti6858_set_termios, .tiocmget = oti6858_tiocmget, .tiocmset = oti6858_tiocmset, @@ -220,7 +221,7 @@ struct oti6858_private { struct delayed_work delayed_setup_work; wait_queue_head_t intr_wait; - struct usb_serial_port *port; /* USB port with which associated */ + struct usb_serial_port *port; /* USB port with which associated */ }; #undef dbg @@ -229,7 +230,8 @@ struct oti6858_private { static void setup_line(struct work_struct *work) { - struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work); + struct oti6858_private *priv = container_of(work, + struct oti6858_private, delayed_setup_work.work); struct usb_serial_port *port = priv->port; struct oti6858_control_pkt *new_setup; unsigned long flags; @@ -237,10 +239,12 @@ static void setup_line(struct work_struct *work) dbg("%s(port = %d)", __func__, port->number); - if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { + new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); + if (new_setup == NULL) { dev_err(&port->dev, "%s(): out of memory!\n", __func__); /* we will try again */ - schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); + schedule_delayed_work(&priv->delayed_setup_work, + msecs_to_jiffies(2)); return; } @@ -256,7 +260,8 @@ static void setup_line(struct work_struct *work) dev_err(&port->dev, "%s(): error reading status\n", __func__); kfree(new_setup); /* we will try again */ - schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2)); + schedule_delayed_work(&priv->delayed_setup_work, + msecs_to_jiffies(2)); return; } @@ -297,7 +302,8 @@ static void setup_line(struct work_struct *work) void send_data(struct work_struct *work) { - struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work); + struct oti6858_private *priv = container_of(work, + struct oti6858_private, delayed_write_work.work); struct usb_serial_port *port = priv->port; int count = 0, result; unsigned long flags; @@ -308,7 +314,8 @@ void send_data(struct work_struct *work) spin_lock_irqsave(&priv->lock, flags); if (priv->flags.write_urb_in_use) { spin_unlock_irqrestore(&priv->lock, flags); - schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2)); + schedule_delayed_work(&priv->delayed_write_work, + msecs_to_jiffies(2)); return; } priv->flags.write_urb_in_use = 1; @@ -359,8 +366,8 @@ void send_data(struct work_struct *work) static int oti6858_startup(struct usb_serial *serial) { - struct usb_serial_port *port = serial->port[0]; - struct oti6858_private *priv; + struct usb_serial_port *port = serial->port[0]; + struct oti6858_private *priv; int i; for (i = 0; i < serial->num_ports; ++i) { @@ -375,8 +382,8 @@ static int oti6858_startup(struct usb_serial *serial) spin_lock_init(&priv->lock); init_waitqueue_head(&priv->intr_wait); -// INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); -// INIT_WORK(&priv->write_work, send_data, serial->port[i]); +/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */ +/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */ priv->port = port; INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); @@ -395,7 +402,7 @@ static int oti6858_startup(struct usb_serial *serial) return -ENOMEM; } -static int oti6858_write(struct usb_serial_port *port, +static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct oti6858_private *priv = usb_get_serial_port_data(port); @@ -413,8 +420,9 @@ static int oti6858_write(struct usb_serial_port *port, return count; } -static int oti6858_write_room(struct usb_serial_port *port) +static int oti6858_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -428,8 +436,9 @@ static int oti6858_write_room(struct usb_serial_port *port) return room; } -static int oti6858_chars_in_buffer(struct usb_serial_port *port) +static int oti6858_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; @@ -443,8 +452,8 @@ static int oti6858_chars_in_buffer(struct usb_serial_port *port) return chars; } -static void oti6858_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void oti6858_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -455,22 +464,22 @@ static void oti6858_set_termios(struct usb_serial_port *port, dbg("%s(port = %d)", __func__, port->number); - if (!port->tty || !port->tty->termios) { + if (!tty) { dbg("%s(): no tty structures", __func__); return; } spin_lock_irqsave(&priv->lock, flags); if (!priv->flags.termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 38400; + tty->termios->c_ospeed = 38400; priv->flags.termios_initialized = 1; - port->tty->termios->c_ispeed = 38400; - port->tty->termios->c_ospeed = 38400; } spin_unlock_irqrestore(&priv->lock, flags); - cflag = port->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; spin_lock_irqsave(&priv->lock, flags); divisor = priv->pending_setup.divisor; @@ -480,19 +489,19 @@ static void oti6858_set_termios(struct usb_serial_port *port, frame_fmt &= ~FMT_DATA_BITS_MASK; switch (cflag & CSIZE) { - case CS5: - frame_fmt |= FMT_DATA_BITS_5; - break; - case CS6: - frame_fmt |= FMT_DATA_BITS_6; - break; - case CS7: - frame_fmt |= FMT_DATA_BITS_7; - break; - default: - case CS8: - frame_fmt |= FMT_DATA_BITS_8; - break; + case CS5: + frame_fmt |= FMT_DATA_BITS_5; + break; + case CS6: + frame_fmt |= FMT_DATA_BITS_6; + break; + case CS7: + frame_fmt |= FMT_DATA_BITS_7; + break; + default: + case CS8: + frame_fmt |= FMT_DATA_BITS_8; + break; } /* manufacturer claims that this device can work with baud rates @@ -500,7 +509,7 @@ static void oti6858_set_termios(struct usb_serial_port *port, * guarantee that any other baud rate will work (especially * the higher ones) */ - br = tty_get_baud_rate(port->tty); + br = tty_get_baud_rate(tty); if (br == 0) { divisor = 0; } else { @@ -511,23 +520,21 @@ static void oti6858_set_termios(struct usb_serial_port *port, new_divisor = (96000000 + 8 * br) / (16 * br); real_br = 96000000 / (16 * new_divisor); divisor = cpu_to_le16(new_divisor); - tty_encode_baud_rate(port->tty, real_br, real_br); + tty_encode_baud_rate(tty, real_br, real_br); } frame_fmt &= ~FMT_STOP_BITS_MASK; - if ((cflag & CSTOPB) != 0) { + if ((cflag & CSTOPB) != 0) frame_fmt |= FMT_STOP_BITS_2; - } else { + else frame_fmt |= FMT_STOP_BITS_1; - } frame_fmt &= ~FMT_PARITY_MASK; if ((cflag & PARENB) != 0) { - if ((cflag & PARODD) != 0) { + if ((cflag & PARODD) != 0) frame_fmt |= FMT_PARITY_ODD; - } else { + else frame_fmt |= FMT_PARITY_EVEN; - } } else { frame_fmt |= FMT_PARITY_NONE; } @@ -564,7 +571,8 @@ static void oti6858_set_termios(struct usb_serial_port *port, spin_unlock_irqrestore(&priv->lock, flags); } -static int oti6858_open(struct usb_serial_port *port, struct file *filp) +static int oti6858_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct oti6858_private *priv = usb_get_serial_port_data(port); struct ktermios tmp_termios; @@ -578,10 +586,11 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp) usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); - if (port->open_count != 1) + if (port->port.count != 1) return 0; - if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) { + buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); + if (buf == NULL) { dev_err(&port->dev, "%s(): out of memory!\n", __func__); return -ENOMEM; } @@ -617,18 +626,19 @@ static int oti6858_open(struct usb_serial_port *port, struct file *filp) if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); - oti6858_close(port, NULL); + oti6858_close(tty, port, NULL); return -EPROTO; } /* setup termios */ - if (port->tty) - oti6858_set_termios(port, &tmp_termios); + if (tty) + oti6858_set_termios(tty, port, &tmp_termios); return 0; } -static void oti6858_close(struct usb_serial_port *port, struct file *filp) +static void oti6858_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -641,7 +651,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); + add_wait_queue(&tty->write_wait, &wait); dbg("%s(): entering wait loop", __func__); for (;;) { set_current_state(TASK_INTERRUPTIBLE); @@ -654,7 +664,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); + remove_wait_queue(&tty->write_wait, &wait); dbg("%s(): after wait loop", __func__); /* clear out any remaining data in the buffer */ @@ -669,7 +679,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) /* data is in the buffer to compute a delay */ /* that is not unnecessarily long) */ /* FIXME - bps = tty_get_baud_rate(port->tty); + bps = tty_get_baud_rate(tty); if (bps > 1200) timeout = max((HZ*2560)/bps,HZ/10); else @@ -690,7 +700,7 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) usb_kill_urb(port->interrupt_in_urb); /* - if (port->tty && (port->tty->termios->c_cflag) & HUPCL) { + if (tty && (tty->termios->c_cflag) & HUPCL) { // drop DTR and RTS spin_lock_irqsave(&priv->lock, flags); priv->pending_setup.control &= ~CONTROL_MASK; @@ -699,9 +709,10 @@ static void oti6858_close(struct usb_serial_port *port, struct file *filp) */ } -static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, +static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -724,16 +735,16 @@ static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file, if ((clear & TIOCM_DTR) != 0) control &= ~CONTROL_DTR_HIGH; - if (control != priv->pending_setup.control) { + if (control != priv->pending_setup.control) priv->pending_setup.control = control; - } - spin_unlock_irqrestore(&priv->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return 0; } -static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file) +static int oti6858_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned pin_state; @@ -779,7 +790,8 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev); + wait_event_interruptible(priv->intr_wait, + priv->status.pin_state != prev); if (signal_pending(current)) return -ERESTARTSYS; @@ -789,12 +801,11 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) changed = prev ^ status; /* FIXME: check if this is correct (active high/low) */ - if ( ((arg & TIOCM_RNG) && (changed & PIN_RI)) || - ((arg & TIOCM_DSR) && (changed & PIN_DSR)) || - ((arg & TIOCM_CD) && (changed & PIN_DCD)) || - ((arg & TIOCM_CTS) && (changed & PIN_CTS))) { - return 0; - } + if (((arg & TIOCM_RNG) && (changed & PIN_RI)) || + ((arg & TIOCM_DSR) && (changed & PIN_DSR)) || + ((arg & TIOCM_CD) && (changed & PIN_DCD)) || + ((arg & TIOCM_CTS) && (changed & PIN_CTS))) + return 0; prev = status; } @@ -802,56 +813,25 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, +static int oti6858_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - void __user *user_arg = (void __user *) arg; - unsigned int x; + struct usb_serial_port *port = tty->driver_data; dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)", __func__, port->number, cmd, arg); switch (cmd) { - case TIOCMBIS: - if (copy_from_user(&x, user_arg, sizeof(x))) - return -EFAULT; - return oti6858_tiocmset(port, NULL, x, 0); - - case TIOCMBIC: - if (copy_from_user(&x, user_arg, sizeof(x))) - return -EFAULT; - return oti6858_tiocmset(port, NULL, 0, x); - - case TIOCMIWAIT: - dbg("%s(): TIOCMIWAIT", __func__); - return wait_modem_info(port, arg); - - default: - dbg("%s(): 0x%04x not supported", __func__, cmd); - break; + case TIOCMIWAIT: + dbg("%s(): TIOCMIWAIT", __func__); + return wait_modem_info(port, arg); + default: + dbg("%s(): 0x%04x not supported", __func__, cmd); + break; } - return -ENOIOCTLCMD; } -static void oti6858_break_ctl(struct usb_serial_port *port, int break_state) -{ - int state; - - dbg("%s(port = %d)", __func__, port->number); - - state = (break_state == 0) ? 0 : 1; - dbg("%s(): turning break %s", __func__, state ? "on" : "off"); - - /* FIXME */ -/* - result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), - BREAK_REQUEST, BREAK_REQUEST_TYPE, state, - 0, NULL, 0, 100); - if (result != 0) - dbg("%s(): error sending break", __func__); - */ -} static void oti6858_shutdown(struct usb_serial *serial) { @@ -964,7 +944,7 @@ static void oti6858_read_int_callback(struct urb *urb) spin_lock_irqsave(&priv->lock, flags); if (priv->flags.write_urb_in_use == 0 && oti6858_buf_data_avail(priv->buf) != 0) { - schedule_delayed_work(&priv->delayed_write_work,0); + schedule_delayed_work(&priv->delayed_write_work, 0); resubmit = 0; } spin_unlock_irqrestore(&priv->lock, flags); @@ -973,7 +953,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (resubmit) { int result; -// dbg("%s(): submitting interrupt urb", __func__); +/* dbg("%s(): submitting interrupt urb", __func__); */ urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result != 0) { @@ -1002,14 +982,16 @@ static void oti6858_read_bulk_callback(struct urb *urb) spin_unlock_irqrestore(&priv->lock, flags); if (status != 0) { - if (!port->open_count) { + if (!port->port.count) { dbg("%s(): port is closed, exiting", __func__); return; } /* if (status == -EPROTO) { - // PL2303 mysteriously fails with -EPROTO reschedule the read - dbg("%s - caught -EPROTO, resubmitting the urb", __func__); + * PL2303 mysteriously fails with -EPROTO reschedule + the read * + dbg("%s - caught -EPROTO, resubmitting the urb", + __func__); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); @@ -1020,14 +1002,14 @@ static void oti6858_read_bulk_callback(struct urb *urb) return; } - tty = port->tty; + tty = port->port.tty; if (tty != NULL && urb->actual_length > 0) { tty_insert_flip_string(tty, data, urb->actual_length); tty_flip_buffer_push(tty); } - // schedule the interrupt urb if we are still open */ - if (port->open_count != 0) { + /* schedule the interrupt urb if we are still open */ + if (port->port.count != 0) { port->interrupt_in_urb->dev = port->serial->dev; result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result != 0) { @@ -1078,7 +1060,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) priv->flags.write_urb_in_use = 0; - // schedule the interrupt urb if we are still open */ + /* schedule the interrupt urb if we are still open */ port->interrupt_in_urb->dev = port->serial->dev; dbg("%s(): submitting interrupt urb", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); @@ -1153,7 +1135,7 @@ static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); + return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size; } /* @@ -1166,7 +1148,7 @@ static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); + return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size; } /* @@ -1253,13 +1235,12 @@ static int __init oti6858_init(void) { int retval; - if ((retval = usb_serial_register(&oti6858_device)) == 0) { - if ((retval = usb_register(&oti6858_driver)) != 0) + retval = usb_serial_register(&oti6858_device); + if (retval == 0) { + retval = usb_register(&oti6858_driver); + if (retval) usb_serial_deregister(&oti6858_device); - else - return 0; } - return retval; } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 2a0dd1b50dc..2c9c446ad62 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -10,7 +10,8 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * */ @@ -25,7 +26,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "pl2303.h" @@ -116,7 +117,7 @@ static struct usb_driver pl2303_driver = { #define CONTROL_RTS 0x02 #define BREAK_REQUEST_TYPE 0x21 -#define BREAK_REQUEST 0x23 +#define BREAK_REQUEST 0x23 #define BREAK_ON 0xffff #define BREAK_OFF 0x0000 @@ -222,7 +223,7 @@ static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); + return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size; } /* @@ -236,7 +237,7 @@ static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); + return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size; } /* @@ -395,7 +396,7 @@ static int pl2303_startup(struct usb_serial *serial) cleanup: kfree(buf); - for (--i; i>=0; --i) { + for (--i; i >= 0; --i) { priv = usb_get_serial_port_data(serial->port[i]); pl2303_buf_free(priv->buf); kfree(priv); @@ -407,7 +408,7 @@ cleanup: static int set_control_lines(struct usb_device *dev, u8 value) { int retval; - + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); @@ -452,14 +453,14 @@ static void pl2303_send(struct usb_serial_port *port) dev_err(&port->dev, "%s - failed submitting write urb," " error %d\n", __func__, result); priv->write_urb_in_use = 0; - // TODO: reschedule pl2303_send + /* TODO: reschedule pl2303_send */ } usb_serial_port_softint(port); } -static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, - int count) +static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -478,8 +479,9 @@ static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf, return count; } -static int pl2303_write_room(struct usb_serial_port *port) +static int pl2303_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -494,8 +496,9 @@ static int pl2303_write_room(struct usb_serial_port *port) return room; } -static int pl2303_chars_in_buffer(struct usb_serial_port *port) +static int pl2303_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; @@ -510,8 +513,8 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port) return chars; } -static void pl2303_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void pl2303_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -526,11 +529,10 @@ static void pl2303_set_termios(struct usb_serial_port *port, spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B9600 | CS8 | CREAD | - HUPCL | CLOCAL; - port->tty->termios->c_ispeed = 9600; - port->tty->termios->c_ospeed = 9600; + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 9600; + tty->termios->c_ospeed = 9600; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -539,16 +541,16 @@ static void pl2303_set_termios(struct usb_serial_port *port, serial settings even to the same values as before. Thus we actually need to filter in this specific case */ - if (!tty_termios_hw_change(port->tty->termios, old_termios)) + if (!tty_termios_hw_change(tty->termios, old_termios)) return; - cflag = port->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; buf = kzalloc(7, GFP_KERNEL); if (!buf) { dev_err(&port->dev, "%s - out of memory.\n", __func__); /* Report back no change occurred */ - *port->tty->termios = *old_termios; + *tty->termios = *old_termios; return; } @@ -560,16 +562,24 @@ static void pl2303_set_termios(struct usb_serial_port *port, if (cflag & CSIZE) { switch (cflag & CSIZE) { - case CS5: buf[6] = 5; break; - case CS6: buf[6] = 6; break; - case CS7: buf[6] = 7; break; - default: - case CS8: buf[6] = 8; break; + case CS5: + buf[6] = 5; + break; + case CS6: + buf[6] = 6; + break; + case CS7: + buf[6] = 7; + break; + default: + case CS8: + buf[6] = 8; + break; } dbg("%s - data bits = %d", __func__, buf[6]); } - baud = tty_get_baud_rate(port->tty);; + baud = tty_get_baud_rate(tty); dbg("%s - baud = %d", __func__, baud); if (baud) { buf[0] = baud & 0xff; @@ -646,12 +656,13 @@ static void pl2303_set_termios(struct usb_serial_port *port, /* FIXME: Need to read back resulting baud rate */ if (baud) - tty_encode_baud_rate(port->tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); kfree(buf); } -static void pl2303_close(struct usb_serial_port *port, struct file *filp) +static void pl2303_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -666,7 +677,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); timeout = PL2303_CLOSING_WAIT; init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); + add_wait_queue(&tty->write_wait, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (pl2303_buf_data_avail(priv->buf) == 0 || @@ -678,7 +689,7 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); + remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ pl2303_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); @@ -690,9 +701,9 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) /* for lower rates we should really know how much */ /* data is in the buffer to compute a delay */ /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); + bps = tty_get_baud_rate(tty); if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); + timeout = max((HZ*2560)/bps, HZ/10); else timeout = 2*HZ; schedule_timeout_interruptible(timeout); @@ -703,8 +714,8 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; if (c_cflag & HUPCL) { /* drop DTR and RTS */ spin_lock_irqsave(&priv->lock, flags); @@ -715,7 +726,8 @@ static void pl2303_close(struct usb_serial_port *port, struct file *filp) } } -static int pl2303_open(struct usb_serial_port *port, struct file *filp) +static int pl2303_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -734,11 +746,10 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) } /* Setup termios */ - if (port->tty) { - pl2303_set_termios(port, &tmp_termios); - } + if (tty) + pl2303_set_termios(tty, port, &tmp_termios); - //FIXME: need to assert RTS and DTR if CRTSCTS off + /* FIXME: need to assert RTS and DTR if CRTSCTS off */ dbg("%s - submitting read urb", __func__); port->read_urb->dev = serial->dev; @@ -746,7 +757,7 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - pl2303_close(port, NULL); + pl2303_close(tty, port, NULL); return -EPROTO; } @@ -756,15 +767,16 @@ static int pl2303_open(struct usb_serial_port *port, struct file *filp) if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); - pl2303_close(port, NULL); + pl2303_close(tty, port, NULL); return -EPROTO; } return 0; } -static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file, +static int pl2303_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -787,8 +799,9 @@ static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file, return set_control_lines(port->serial->dev, control); } -static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file) +static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; @@ -839,12 +852,12 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); - changed=prevstatus^status; + changed = prevstatus ^ status; if (((arg & TIOCM_RNG) && (changed & UART_RING)) || ((arg & TIOCM_DSR) && (changed & UART_DSR)) || ((arg & TIOCM_CD) && (changed & UART_DCD)) || - ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) { + ((arg & TIOCM_CTS) && (changed & UART_CTS))) { return 0; } prevstatus = status; @@ -853,26 +866,26 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int pl2303_ioctl(struct usb_serial_port *port, struct file *file, +static int pl2303_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - return wait_modem_info(port, arg); - - default: - dbg("%s not supported = 0x%04x", __func__, cmd); - break; + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + return wait_modem_info(port, arg); + default: + dbg("%s not supported = 0x%04x", __func__, cmd); + break; } - return -ENOIOCTLCMD; } -static void pl2303_break_ctl(struct usb_serial_port *port, int break_state) +static void pl2303_break_ctl(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; u16 state; int result; @@ -883,7 +896,8 @@ static void pl2303_break_ctl(struct usb_serial_port *port, int break_state) state = BREAK_OFF; else state = BREAK_ON; - dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on"); + dbg("%s - turning break %s", __func__, + state == BREAK_OFF ? "off" : "on"); result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, @@ -937,7 +951,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, if (actual_length < length) return; - /* Save off the uart status for others to look at */ + /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); @@ -1001,7 +1015,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) if (status) { dbg("%s - urb status = %d", __func__, status); - if (!port->open_count) { + if (!port->port.count) { dbg("%s - port is closed, exiting.", __func__); return; } @@ -1036,7 +1050,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) /* break takes precedence over parity, */ /* which takes precedence over framing errors */ - if (line_status & UART_BREAK_ERROR ) + if (line_status & UART_BREAK_ERROR) tty_flag = TTY_BREAK; else if (line_status & UART_PARITY_ERROR) tty_flag = TTY_PARITY; @@ -1044,7 +1058,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) tty_flag = TTY_FRAME; dbg("%s - tty_flag = %d", __func__, tty_flag); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ @@ -1056,7 +1070,7 @@ static void pl2303_read_bulk_callback(struct urb *urb) } /* Schedule the next read _if_ we are still open */ - if (port->open_count) { + if (port->port.count) { urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 94bddf06ea4..def52d07a4e 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -13,24 +13,25 @@ * Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com> */ -/* - * The encapsultaion is designed to overcome difficulties with some USB hardware. +/* + * The encapsultaion is designed to overcome difficulties with some USB + * hardware. * * While the USB protocol has a CRC over the data while in transit, i.e. while - * being carried over the bus, there is no end to end protection. If the hardware - * has any problems getting the data into or out of the USB transmit and receive - * FIFO's then data can be lost. + * being carried over the bus, there is no end to end protection. If the + * hardware has any problems getting the data into or out of the USB transmit + * and receive FIFO's then data can be lost. * - * This protocol adds a two byte trailer to each USB packet to specify the number - * of bytes of valid data and a 10 bit CRC that will allow the receiver to verify - * that the entire USB packet was received without error. + * This protocol adds a two byte trailer to each USB packet to specify the + * number of bytes of valid data and a 10 bit CRC that will allow the receiver + * to verify that the entire USB packet was received without error. * - * Because in this case the sender and receiver are the class and function drivers - * there is now end to end protection. + * Because in this case the sender and receiver are the class and function + * drivers there is now end to end protection. * - * There is an additional option that can be used to force all transmitted packets - * to be padded to the maximum packet size. This provides a work around for some - * devices which have problems with small USB packets. + * There is an additional option that can be used to force all transmitted + * packets to be padded to the maximum packet size. This provides a work + * around for some devices which have problems with small USB packets. * * Assuming a packetsize of N: * @@ -44,11 +45,12 @@ * | Data Length | 10 bit CRC | * + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 + * - * The 10 bit CRC is computed across the sent data, followed by the trailer with - * the length set and the CRC set to zero. The CRC is then OR'd into the trailer. + * The 10 bit CRC is computed across the sent data, followed by the trailer + * with the length set and the CRC set to zero. The CRC is then OR'd into + * the trailer. * - * When received a 10 bit CRC is computed over the entire frame including the trailer - * and should be equal to zero. + * When received a 10 bit CRC is computed over the entire frame including + * the trailer and should be equal to zero. * * Two module parameters are used to control the encapsulation, if both are * turned of the module works as a simple serial device with NO @@ -69,7 +71,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -86,12 +88,12 @@ static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com" #define DRIVER_DESC "USB Safe Encapsulated Serial" -MODULE_AUTHOR (DRIVER_AUTHOR); -MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -static __u16 vendor; // no default -static __u16 product; // no default +static __u16 vendor; /* no default */ +static __u16 product; /* no default */ module_param(vendor, ushort, 0); MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)"); module_param(product, ushort, 0); @@ -122,30 +124,31 @@ MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off"); #define LINEO_SAFESERIAL_CRC_PADDED 0x02 -#define MY_USB_DEVICE(vend,prod,dc,ic,isc) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS | \ - USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, \ - .idVendor = (vend), \ - .idProduct = (prod),\ - .bDeviceClass = (dc),\ - .bInterfaceClass = (ic), \ - .bInterfaceSubClass = (isc), +#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_DEV_CLASS | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_SUBCLASS, \ + .idVendor = (vend), \ + .idProduct = (prod),\ + .bDeviceClass = (dc),\ + .bInterfaceClass = (ic), \ + .bInterfaceSubClass = (isc), static struct usb_device_id id_table[] = { - {MY_USB_DEVICE (0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Itsy - {MY_USB_DEVICE (0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Calypso - {MY_USB_DEVICE (0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Iris - {MY_USB_DEVICE (0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie - {MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie - {MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie - {MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Sharp tmp - // extra null entry for module - // vendor/produc parameters - {MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, - {} // terminating entry + {MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Itsy */ + {MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Calypso */ + {MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Iris */ + {MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Sharp tmp */ + /* extra null entry for module vendor/produc parameters */ + {MY_USB_DEVICE(0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, + {} /* terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table); +MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver safe_driver = { .name = "safe_serial", @@ -156,29 +159,45 @@ static struct usb_driver safe_driver = { }; static const __u16 crc10_table[256] = { - 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, - 0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf, - 0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c, - 0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad, - 0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a, - 0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b, - 0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158, - 0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169, - 0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076, - 0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047, - 0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014, - 0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025, - 0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2, - 0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083, - 0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0, - 0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1, + 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, + 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, + 0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, + 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf, + 0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, + 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c, + 0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, + 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad, + 0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, + 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a, + 0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, + 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b, + 0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, + 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158, + 0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, + 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169, + 0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, + 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076, + 0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, + 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047, + 0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, + 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014, + 0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, + 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025, + 0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, + 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2, + 0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, + 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083, + 0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, + 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0, + 0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, + 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1, }; -#define CRC10_INITFCS 0x000 // Initial FCS value -#define CRC10_GOODFCS 0x000 // Good final FCS value -#define CRC10_FCS(fcs, c) ( (((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c)) +#define CRC10_INITFCS 0x000 /* Initial FCS value */ +#define CRC10_GOODFCS 0x000 /* Good final FCS value */ +#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c)) -/** +/** * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer * @sp: pointer to buffer * @len: number of bytes @@ -187,13 +206,13 @@ static const __u16 crc10_table[256] = { * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return * new 10 bit FCS. */ -static __u16 __inline__ fcs_compute10 (unsigned char *sp, int len, __u16 fcs) +static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs) { - for (; len-- > 0; fcs = CRC10_FCS (fcs, *sp++)); + for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++)); return fcs; } -static void safe_read_bulk_callback (struct urb *urb) +static void safe_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; @@ -201,7 +220,7 @@ static void safe_read_bulk_callback (struct urb *urb) int result; int status = urb->status; - dbg ("%s", __func__); + dbg("%s", __func__); if (status) { dbg("%s - nonzero read bulk status received: %d", @@ -209,76 +228,82 @@ static void safe_read_bulk_callback (struct urb *urb) return; } - dbg ("safe_read_bulk_callback length: %d", port->read_urb->actual_length); + dbg("safe_read_bulk_callback length: %d", + port->read_urb->actual_length); #ifdef ECHO_RCV { int i; unsigned char *cp = port->read_urb->transfer_buffer; for (i = 0; i < port->read_urb->actual_length; i++) { - if ((i % 32) == 0) { - printk ("\nru[%02x] ", i); - } - printk ("%02x ", *cp++); + if ((i % 32) == 0) + printk("\nru[%02x] ", i); + printk("%02x ", *cp++); } - printk ("\n"); + printk("\n"); } #endif if (safe) { __u16 fcs; - if (!(fcs = fcs_compute10 (data, length, CRC10_INITFCS))) { + fcs = fcs_compute10(data, length, CRC10_INITFCS); + if (!fcs) { int actual_length = data[length - 2] >> 2; if (actual_length <= (length - 2)) { - info ("%s - actual: %d", __func__, actual_length); - tty_insert_flip_string(port->tty, data, actual_length); - tty_flip_buffer_push (port->tty); + info("%s - actual: %d", __func__, + actual_length); + tty_insert_flip_string(port->port.tty, + data, actual_length); + tty_flip_buffer_push(port->port.tty); } else { - err ("%s - inconsistent lengths %d:%d", __func__, - actual_length, length); + err("%s - inconsistent lengths %d:%d", + __func__, actual_length, length); } } else { - err ("%s - bad CRC %x", __func__, fcs); + err("%s - bad CRC %x", __func__, fcs); } } else { - tty_insert_flip_string(port->tty, data, length); - tty_flip_buffer_push (port->tty); + tty_insert_flip_string(port->port.tty, data, length); + tty_flip_buffer_push(port->port.tty); } /* Continue trying to always read */ - usb_fill_bulk_urb (urb, port->serial->dev, - usb_rcvbulkpipe (port->serial->dev, port->bulk_in_endpointAddress), - urb->transfer_buffer, urb->transfer_buffer_length, - safe_read_bulk_callback, port); - - if ((result = usb_submit_urb (urb, GFP_ATOMIC))) { - err ("%s - failed resubmitting read urb, error %d", __func__, result); + usb_fill_bulk_urb(urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + urb->transfer_buffer, urb->transfer_buffer_length, + safe_read_bulk_callback, port); + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + err("%s - failed resubmitting read urb, error %d", + __func__, result); /* FIXME: Need a mechanism to retry later if this happens */ - } } -static int safe_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int safe_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { unsigned char *data; int result; int i; int packet_length; - dbg ("safe_write port: %p %d urb: %p count: %d", port, port->number, port->write_urb, - count); + dbg("safe_write port: %p %d urb: %p count: %d", + port, port->number, port->write_urb, count); if (!port->write_urb) { - dbg ("%s - write urb NULL", __func__); + dbg("%s - write urb NULL", __func__); return 0; } - dbg ("safe_write write_urb: %d transfer_buffer_length", + dbg("safe_write write_urb: %d transfer_buffer_length", port->write_urb->transfer_buffer_length); if (!port->write_urb->transfer_buffer_length) { - dbg ("%s - write urb transfer_buffer_length zero", __func__); + dbg("%s - write urb transfer_buffer_length zero", __func__); return 0; } if (count == 0) { - dbg ("%s - write request of 0 bytes", __func__); + dbg("%s - write request of 0 bytes", __func__); return 0; } spin_lock_bh(&port->lock); @@ -290,85 +315,85 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i port->write_urb_busy = 1; spin_unlock_bh(&port->lock); - packet_length = port->bulk_out_size; // get max packetsize + packet_length = port->bulk_out_size; /* get max packetsize */ - i = packet_length - (safe ? 2 : 0); // get bytes to send + i = packet_length - (safe ? 2 : 0); /* get bytes to send */ count = (count > i) ? i : count; - // get the data into the transfer buffer + /* get the data into the transfer buffer */ data = port->write_urb->transfer_buffer; - memset (data, '0', packet_length); + memset(data, '0', packet_length); - memcpy (data, buf, count); + memcpy(data, buf, count); if (safe) { __u16 fcs; - // pad if necessary - if (!padded) { + /* pad if necessary */ + if (!padded) packet_length = count + 2; - } - // set count + /* set count */ data[packet_length - 2] = count << 2; data[packet_length - 1] = 0; - // compute fcs and insert into trailer - fcs = fcs_compute10 (data, packet_length, CRC10_INITFCS); + /* compute fcs and insert into trailer */ + fcs = fcs_compute10(data, packet_length, CRC10_INITFCS); data[packet_length - 2] |= fcs >> 8; data[packet_length - 1] |= fcs & 0xff; - // set length to send + /* set length to send */ port->write_urb->transfer_buffer_length = packet_length; } else { port->write_urb->transfer_buffer_length = count; } - usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, + port->write_urb->transfer_buffer); #ifdef ECHO_TX { int i; unsigned char *cp = port->write_urb->transfer_buffer; for (i = 0; i < port->write_urb->transfer_buffer_length; i++) { - if ((i % 32) == 0) { - printk ("\nsu[%02x] ", i); - } - printk ("%02x ", *cp++); + if ((i % 32) == 0) + printk("\nsu[%02x] ", i); + printk("%02x ", *cp++); } - printk ("\n"); + printk("\n"); } #endif port->write_urb->dev = port->serial->dev; - if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) { + result = usb_submit_urb(port->write_urb, GFP_KERNEL); + if (result) { port->write_urb_busy = 0; - err ("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); return 0; } - dbg ("%s urb: %p submitted", __func__, port->write_urb); + dbg("%s urb: %p submitted", __func__, port->write_urb); - return (count); + return count; } -static int safe_write_room (struct usb_serial_port *port) +static int safe_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; int room = 0; /* Default: no room */ unsigned long flags; - dbg ("%s", __func__); + dbg("%s", __func__); spin_lock_irqsave(&port->lock, flags); if (port->write_urb_busy) room = port->bulk_out_size - (safe ? 2 : 0); spin_unlock_irqrestore(&port->lock, flags); - if (room) { - dbg ("safe_write_room returns %d", room); - } - + if (room) + dbg("safe_write_room returns %d", room); return room; } -static int safe_startup (struct usb_serial *serial) +static int safe_startup(struct usb_serial *serial) { switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) { case LINEO_SAFESERIAL_CRC: @@ -396,17 +421,18 @@ static struct usb_serial_driver safe_device = { .attach = safe_startup, }; -static int __init safe_init (void) +static int __init safe_init(void) { int i, retval; - info (DRIVER_VERSION " " DRIVER_AUTHOR); - info (DRIVER_DESC); - info ("vendor: %x product: %x safe: %d padded: %d\n", vendor, product, safe, padded); + info(DRIVER_VERSION " " DRIVER_AUTHOR); + info(DRIVER_DESC); + info("vendor: %x product: %x safe: %d padded: %d\n", + vendor, product, safe, padded); - // if we have vendor / product parameters patch them into id list + /* if we have vendor / product parameters patch them into id list */ if (vendor || product) { - info ("vendor: %x product: %x\n", vendor, product); + info("vendor: %x product: %x\n", vendor, product); for (i = 0; i < ARRAY_SIZE(id_table); i++) { if (!id_table[i].idVendor && !id_table[i].idProduct) { @@ -431,11 +457,11 @@ failed_usb_serial_register: return retval; } -static void __exit safe_exit (void) +static void __exit safe_exit(void) { - usb_deregister (&safe_driver); - usb_serial_deregister (&safe_device); + usb_deregister(&safe_driver); + usb_serial_deregister(&safe_device); } -module_init (safe_init); -module_exit (safe_exit); +module_init(safe_init); +module_exit(safe_exit); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 29074c1ba22..2f6f1523ec5 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -250,7 +250,8 @@ struct sierra_port_private { int ri_state; }; -static int sierra_send_setup(struct usb_serial_port *port) +static int sierra_send_setup(struct tty_struct *tty, + struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; @@ -260,7 +261,7 @@ static int sierra_send_setup(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - if (port->tty) { + if (tty) { int val = 0; if (portdata->dtr_state) val |= 0x01; @@ -284,32 +285,17 @@ static int sierra_send_setup(struct usb_serial_port *port) return 0; } -static void sierra_rx_throttle(struct usb_serial_port *port) +static void sierra_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s", __func__); + tty_termios_copy_hw(tty->termios, old_termios); + sierra_send_setup(tty, port); } -static void sierra_rx_unthrottle(struct usb_serial_port *port) -{ - dbg("%s", __func__); -} - -static void sierra_break_ctl(struct usb_serial_port *port, int break_state) -{ - /* Unfortunately, I don't know how to send a break */ - dbg("%s", __func__); -} - -static void sierra_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) -{ - dbg("%s", __func__); - tty_termios_copy_hw(port->tty->termios, old_termios); - sierra_send_setup(port); -} - -static int sierra_tiocmget(struct usb_serial_port *port, struct file *file) +static int sierra_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; unsigned int value; struct sierra_port_private *portdata; @@ -325,9 +311,10 @@ static int sierra_tiocmget(struct usb_serial_port *port, struct file *file) return value; } -static int sierra_tiocmset(struct usb_serial_port *port, struct file *file, +static int sierra_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct sierra_port_private *portdata; portdata = usb_get_serial_port_data(port); @@ -341,13 +328,7 @@ static int sierra_tiocmset(struct usb_serial_port *port, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return sierra_send_setup(port); -} - -static int sierra_ioctl(struct usb_serial_port *port, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; + return sierra_send_setup(tty, port); } static void sierra_outdat_callback(struct urb *urb) @@ -374,8 +355,8 @@ static void sierra_outdat_callback(struct urb *urb) } /* Write */ -static int sierra_write(struct usb_serial_port *port, - const unsigned char *buf, int count) +static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct sierra_port_private *portdata = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -463,7 +444,7 @@ static void sierra_indat_callback(struct urb *urb) dbg("%s: nonzero status: %d on endpoint %02x.", __func__, status, endpoint); } else { - tty = port->tty; + tty = port->port.tty; if (urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length); tty_insert_flip_string(tty, data, urb->actual_length); @@ -473,7 +454,7 @@ static void sierra_indat_callback(struct urb *urb) } /* Resubmit urb so we continue receiving */ - if (port->open_count && status != -ESHUTDOWN) { + if (port->port.count && status != -ESHUTDOWN) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -517,9 +498,9 @@ static void sierra_instat_callback(struct urb *urb) portdata->dsr_state = ((signals & 0x02) ? 1 : 0); portdata->ri_state = ((signals & 0x08) ? 1 : 0); - if (port->tty && !C_CLOCAL(port->tty) && + if (port->port.tty && !C_CLOCAL(port->port.tty) && old_dcd_state && !portdata->dcd_state) - tty_hangup(port->tty); + tty_hangup(port->port.tty); } else { dbg("%s: type %x req %x", __func__, req_pkt->bRequestType, req_pkt->bRequest); @@ -537,8 +518,9 @@ static void sierra_instat_callback(struct urb *urb) } } -static int sierra_write_room(struct usb_serial_port *port) +static int sierra_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct sierra_port_private *portdata = usb_get_serial_port_data(port); unsigned long flags; @@ -557,22 +539,8 @@ static int sierra_write_room(struct usb_serial_port *port) return 2048; } -static int sierra_chars_in_buffer(struct usb_serial_port *port) -{ - dbg("%s - port %d", __func__, port->number); - - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device as we can't see the backend here, so just - * tell the tty layer that everything is flushed. - * - * FIXME: should walk the outstanding urbs info - */ - return 0; -} - -static int sierra_open(struct usb_serial_port *port, struct file *filp) +static int sierra_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct sierra_port_private *portdata; struct usb_serial *serial = port->serial; @@ -612,9 +580,10 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp) } } - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; - sierra_send_setup(port); + sierra_send_setup(tty, port); /* start up the interrupt endpoint if we have one */ if (port->interrupt_in_urb) { @@ -626,7 +595,8 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp) return 0; } -static void sierra_close(struct usb_serial_port *port, struct file *filp) +static void sierra_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int i; struct usb_serial *serial = port->serial; @@ -641,7 +611,7 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp) if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) - sierra_send_setup(port); + sierra_send_setup(tty, port); mutex_unlock(&serial->disc_mutex); /* Stop reading/writing urbs */ @@ -651,7 +621,7 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp) usb_kill_urb(port->interrupt_in_urb); - port->tty = NULL; + port->port.tty = NULL; /* FIXME */ } static int sierra_startup(struct usb_serial *serial) @@ -754,12 +724,7 @@ static struct usb_serial_driver sierra_device = { .close = sierra_close, .write = sierra_write, .write_room = sierra_write_room, - .chars_in_buffer = sierra_chars_in_buffer, - .throttle = sierra_rx_throttle, - .unthrottle = sierra_rx_unthrottle, - .ioctl = sierra_ioctl, .set_termios = sierra_set_termios, - .break_ctl = sierra_break_ctl, .tiocmget = sierra_tiocmget, .tiocmset = sierra_tiocmset, .attach = sierra_startup, @@ -792,7 +757,7 @@ failed_device_register: static void __exit sierra_exit(void) { - usb_deregister (&sierra_driver); + usb_deregister(&sierra_driver); usb_serial_deregister(&sierra_device); } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 55b2570b8b8..283cf6b36b2 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -208,7 +208,7 @@ static inline unsigned int ringbuf_avail_data(struct ringbuf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); + return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size; } /* get the number of space in the pipo */ @@ -216,7 +216,7 @@ static inline unsigned int ringbuf_avail_space(struct ringbuf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); + return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size; } /* put count data into pipo */ @@ -448,7 +448,8 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, /* close the serial port. We should wait for data sending to device 1st and * then kill all urb. */ -static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) +static void spcp8x5_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -464,7 +465,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); timeout = SPCP8x5_CLOSING_WAIT; init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); + add_wait_queue(&tty->write_wait, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (ringbuf_avail_data(priv->buf) == 0 || @@ -475,7 +476,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); + remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ clear_ringbuf(priv->buf); @@ -486,7 +487,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) * flow control for data rates of 1200 bps or more, for lower rates we * should really know how much data is in the buffer to compute a delay * that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); + bps = tty_get_baud_rate(tty); if (bps > 1200) timeout = max((HZ*2560) / bps, HZ/10); else @@ -495,8 +496,8 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) schedule_timeout(timeout); /* clear control lines */ - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; if (c_cflag & HUPCL) { spin_lock_irqsave(&priv->lock, flags); priv->line_control = 0; @@ -518,14 +519,14 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) } /* set the serial param for transfer. we should check if we really need to - * transfer. then if be set flow contorl we should do this too. */ -static void spcp8x5_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) + * transfer. if we set flow control we should do this too. */ +static void spcp8x5_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int cflag = port->tty->termios->c_cflag; + unsigned int cflag = tty->termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; @@ -533,21 +534,19 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, int i; u8 control; - if ((!port->tty) || (!port->tty->termios)) - return; - /* for the 1st time call this function */ spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B115200 | CS8 | CREAD | - HUPCL | CLOCAL; + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 115200; + tty->termios->c_ospeed = 115200; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); /* check that they really want us to change something */ - if (!tty_termios_hw_change(port->tty->termios, old_termios)) + if (!tty_termios_hw_change(tty->termios, old_termios)) return; /* set DTR/RTS active */ @@ -567,7 +566,7 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, } /* Set Baud Rate */ - baud = tty_get_baud_rate(port->tty);; + baud = tty_get_baud_rate(tty);; switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; @@ -643,7 +642,8 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, /* open the serial port. do some usb system call. set termios and get the line * status of the device. then submit the read urb */ -static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) +static int spcp8x5_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -665,7 +665,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) return ret; spin_lock_irqsave(&priv->lock, flags); - if (port->tty->termios->c_cflag & CBAUD) + if (tty && (tty->termios->c_cflag & CBAUD)) priv->line_control = MCR_DTR | MCR_RTS; else priv->line_control = 0; @@ -674,8 +674,8 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ - if (port->tty) - spcp8x5_set_termios(port, &tmp_termios); + if (tty) + spcp8x5_set_termios(tty, port, &tmp_termios); spcp8x5_get_msr(serial->dev, &status, priv->type); @@ -690,7 +690,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret) { - spcp8x5_close(port, NULL); + spcp8x5_close(tty, port, NULL); return -EPROTO; } return 0; @@ -717,7 +717,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) /* check the urb status */ if (urb->status) { - if (!port->open_count) + if (!port->port.count) return; if (urb->status == -EPROTO) { /* spcp8x5 mysteriously fails with -EPROTO */ @@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) tty_flag = TTY_FRAME; dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ @@ -767,7 +767,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) } /* Schedule the next read _if_ we are still open */ - if (port->open_count) { + if (port->port.count) { urb->dev = port->serial->dev; result = usb_submit_urb(urb , GFP_ATOMIC); if (result) @@ -866,7 +866,7 @@ static void spcp8x5_write_bulk_callback(struct urb *urb) } /* write data to ring buffer. and then start the write transfer */ -static int spcp8x5_write(struct usb_serial_port *port, +static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); @@ -925,9 +925,10 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port, return 0; } -static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file, +static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { @@ -943,9 +944,10 @@ static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file, return -ENOIOCTLCMD; } -static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file, +static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -965,8 +967,9 @@ static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file, return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } -static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file) +static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; @@ -989,8 +992,9 @@ static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file) } /* get the avail space room in ring buffer */ -static int spcp8x5_write_room(struct usb_serial_port *port) +static int spcp8x5_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -1003,8 +1007,9 @@ static int spcp8x5_write_room(struct usb_serial_port *port) } /* get the number of avail data in write ring buffer */ -static int spcp8x5_chars_in_buffer(struct usb_serial_port *port) +static int spcp8x5_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a26a629dfc4..e39c779e416 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -16,7 +16,7 @@ * For questions or problems with this driver, contact Texas Instruments * technical support, or Al Borchers <alborchers@steinerpoint.com>, or * Peter Berger <pberger@brimson.com>. - * + * * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052 * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device * configuration. @@ -70,6 +70,7 @@ #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/firmware.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> @@ -81,7 +82,7 @@ #include <linux/serial.h> #include <linux/circ_buf.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/firmware.h> @@ -149,21 +150,24 @@ struct ti_device { static int ti_startup(struct usb_serial *serial); static void ti_shutdown(struct usb_serial *serial); -static int ti_open(struct usb_serial_port *port, struct file *file); -static void ti_close(struct usb_serial_port *port, struct file *file); -static int ti_write(struct usb_serial_port *port, const unsigned char *data, - int count); -static int ti_write_room(struct usb_serial_port *port); -static int ti_chars_in_buffer(struct usb_serial_port *port); -static void ti_throttle(struct usb_serial_port *port); -static void ti_unthrottle(struct usb_serial_port *port); -static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg); -static void ti_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios); -static int ti_tiocmget(struct usb_serial_port *port, struct file *file); -static int ti_tiocmset(struct usb_serial_port *port, struct file *file, - unsigned int set, unsigned int clear); -static void ti_break(struct usb_serial_port *port, int break_state); +static int ti_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *file); +static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *file); +static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count); +static int ti_write_room(struct tty_struct *tty); +static int ti_chars_in_buffer(struct tty_struct *tty); +static void ti_throttle(struct tty_struct *tty); +static void ti_unthrottle(struct tty_struct *tty); +static int ti_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void ti_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static int ti_tiocmget(struct tty_struct *tty, struct file *file); +static int ti_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void ti_break(struct tty_struct *tty, int break_state); static void ti_interrupt_callback(struct urb *urb); static void ti_bulk_in_callback(struct urb *urb); static void ti_bulk_out_callback(struct urb *urb); @@ -192,8 +196,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, static int ti_write_byte(struct ti_device *tdev, unsigned long addr, __u8 mask, __u8 byte); -static int ti_download_firmware(struct ti_device *tdev, char *fw_name); - +static int ti_download_firmware(struct ti_device *tdev, int type); /* circular buffer */ static struct circ_buf *ti_buf_alloc(void); @@ -325,19 +328,25 @@ module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off"); +MODULE_PARM_DESC(low_latency, + "TTY low_latency flag, 0=off, 1=on, default is off"); module_param(closing_wait, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); +MODULE_PARM_DESC(closing_wait, + "Maximum wait for data to drain in close, in .01 secs, default is 4000"); module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO); -MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers"); +MODULE_PARM_DESC(vendor_3410, + "Vendor ids for 3410 based devices, 1-5 short integers"); module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO); -MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers"); +MODULE_PARM_DESC(product_3410, + "Product ids for 3410 based devices, 1-5 short integers"); module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO); -MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers"); +MODULE_PARM_DESC(vendor_5052, + "Vendor ids for 5052 based devices, 1-5 short integers"); module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO); -MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers"); +MODULE_PARM_DESC(product_5052, + "Product ids for 5052 based devices, 1-5 short integers"); MODULE_DEVICE_TABLE(usb, ti_id_table_combined); @@ -346,18 +355,18 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined); static int __init ti_init(void) { - int i,j; + int i, j; int ret; /* insert extra vendor and product ids */ j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1; - for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) { + for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) { ti_id_table_3410[j].idVendor = vendor_3410[i]; ti_id_table_3410[j].idProduct = product_3410[i]; ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; } j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1; - for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) { + for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) { ti_id_table_5052[j].idVendor = vendor_5052[i]; ti_id_table_5052[j].idProduct = product_5052[i]; ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE; @@ -426,15 +435,15 @@ static int ti_startup(struct usb_serial *serial) /* determine device type */ if (usb_match_id(serial->interface, ti_id_table_3410)) tdev->td_is_3410 = 1; - dbg("%s - device type is %s", __func__, tdev->td_is_3410 ? "3410" : "5052"); + dbg("%s - device type is %s", __func__, + tdev->td_is_3410 ? "3410" : "5052"); /* if we have only 1 configuration, download firmware */ if (dev->descriptor.bNumConfigurations == 1) { - if (tdev->td_is_3410) - status = ti_download_firmware(tdev, "ti_3410.fw"); + status = ti_download_firmware(tdev, 3410); else - status = ti_download_firmware(tdev, "ti_5052.fw"); + status = ti_download_firmware(tdev, 5052); if (status) goto free_tdev; @@ -446,7 +455,7 @@ static int ti_startup(struct usb_serial *serial) status = -ENODEV; goto free_tdev; - } + } /* the second configuration must be set (in sysfs by hotplug script) */ if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { @@ -463,7 +472,8 @@ static int ti_startup(struct usb_serial *serial) goto free_tports; } spin_lock_init(&tport->tp_lock); - tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); + tport->tp_uart_base_addr = (i == 0 ? + TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; tport->tp_closing_wait = closing_wait; init_waitqueue_head(&tport->tp_msr_wait); @@ -480,11 +490,11 @@ static int ti_startup(struct usb_serial *serial) usb_set_serial_port_data(serial->port[i], tport); tport->tp_uart_mode = 0; /* default is RS232 */ } - + return 0; free_tports: - for (--i; i>=0; --i) { + for (--i; i >= 0; --i) { tport = usb_get_serial_port_data(serial->port[i]); ti_buf_free(tport->tp_write_buf); kfree(tport); @@ -505,7 +515,7 @@ static void ti_shutdown(struct usb_serial *serial) dbg("%s", __func__); - for (i=0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) { tport = usb_get_serial_port_data(serial->port[i]); if (tport) { ti_buf_free(tport->tp_write_buf); @@ -519,7 +529,8 @@ static void ti_shutdown(struct usb_serial *serial) } -static int ti_open(struct usb_serial_port *port, struct file *file) +static int ti_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *file) { struct ti_port *tport = usb_get_serial_port_data(port); struct ti_device *tdev; @@ -527,8 +538,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file) struct urb *urb; int port_number; int status; - __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | - TI_PIPE_TIMEOUT_ENABLE | + __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | + TI_PIPE_TIMEOUT_ENABLE | (TI_TRANSFER_TIMEOUT << 2)); dbg("%s - port %d", __func__, port->number); @@ -543,9 +554,9 @@ static int ti_open(struct usb_serial_port *port, struct file *file) if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - if (port->tty) - port->tty->low_latency = - (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if (tty) + tty->low_latency = + (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; port_number = port->number - port->serial->minor; @@ -559,7 +570,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file) dbg("%s - start interrupt in urb", __func__); urb = tdev->td_serial->port[0]->interrupt_in_urb; if (!urb) { - dev_err(&port->dev, "%s - no interrupt urb\n", __func__); + dev_err(&port->dev, "%s - no interrupt urb\n", + __func__); status = -EINVAL; goto release_lock; } @@ -568,18 +580,22 @@ static int ti_open(struct usb_serial_port *port, struct file *file) urb->dev = dev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); + dev_err(&port->dev, + "%s - submit interrupt urb failed, %d\n", + __func__, status); goto release_lock; } } - ti_set_termios(port, port->tty->termios); + if (tty) + ti_set_termios(tty, port, tty->termios); dbg("%s - sending TI_OPEN_PORT", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send open command, %d\n", + __func__, status); goto unlink_int_urb; } @@ -587,7 +603,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file) status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send start command, %d\n", + __func__, status); goto unlink_int_urb; } @@ -595,13 +612,15 @@ static int ti_open(struct usb_serial_port *port, struct file *file) status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", + __func__, status); goto unlink_int_urb; } status = ti_command_out_sync(tdev, TI_PURGE_PORT, (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", + __func__, status); goto unlink_int_urb; } @@ -610,13 +629,15 @@ static int ti_open(struct usb_serial_port *port, struct file *file) usb_clear_halt(dev, port->write_urb->pipe); usb_clear_halt(dev, port->read_urb->pipe); - ti_set_termios(port, port->tty->termios); + if (tty) + ti_set_termios(tty, port, tty->termios); dbg("%s - sending TI_OPEN_PORT (2)", __func__); status = ti_command_out_sync(tdev, TI_OPEN_PORT, (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send open command (2), %d\n", + __func__, status); goto unlink_int_urb; } @@ -624,7 +645,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file) status = ti_command_out_sync(tdev, TI_START_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) { - dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot send start command (2), %d\n", + __func__, status); goto unlink_int_urb; } @@ -642,7 +664,8 @@ static int ti_open(struct usb_serial_port *port, struct file *file) urb->dev = dev; status = usb_submit_urb(urb, GFP_KERNEL); if (status) { - dev_err(&port->dev, "%s - submit read urb failed, %d\n", __func__, status); + dev_err(&port->dev, "%s - submit read urb failed, %d\n", + __func__, status); goto unlink_int_urb; } @@ -661,7 +684,8 @@ release_lock: } -static void ti_close(struct usb_serial_port *port, struct file *file) +static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *file) { struct ti_device *tdev; struct ti_port *tport; @@ -670,7 +694,7 @@ static void ti_close(struct usb_serial_port *port, struct file *file) int do_unlock; dbg("%s - port %d", __func__, port->number); - + tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); if (tdev == NULL || tport == NULL) @@ -690,7 +714,9 @@ static void ti_close(struct usb_serial_port *port, struct file *file) status = ti_command_out_sync(tdev, TI_CLOSE_PORT, (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); if (status) - dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __func__, status); + dev_err(&port->dev, + "%s - cannot send close port command, %d\n" + , __func__, status); /* if mutex_lock is interrupted, continue anyway */ do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock); @@ -707,8 +733,8 @@ static void ti_close(struct usb_serial_port *port, struct file *file) } -static int ti_write(struct usb_serial_port *port, const unsigned char *data, - int count) +static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) { struct ti_port *tport = usb_get_serial_port_data(port); unsigned long flags; @@ -733,8 +759,9 @@ static int ti_write(struct usb_serial_port *port, const unsigned char *data, } -static int ti_write_room(struct usb_serial_port *port) +static int ti_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -743,7 +770,7 @@ static int ti_write_room(struct usb_serial_port *port) if (tport == NULL) return -ENODEV; - + spin_lock_irqsave(&tport->tp_lock, flags); room = ti_buf_space_avail(tport->tp_write_buf); spin_unlock_irqrestore(&tport->tp_lock, flags); @@ -753,8 +780,9 @@ static int ti_write_room(struct usb_serial_port *port) } -static int ti_chars_in_buffer(struct usb_serial_port *port) +static int ti_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; @@ -773,32 +801,26 @@ static int ti_chars_in_buffer(struct usb_serial_port *port) } -static void ti_throttle(struct usb_serial_port *port) +static void ti_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - struct tty_struct *tty; dbg("%s - port %d", __func__, port->number); if (tport == NULL) return; - tty = port->tty; - if (!tty) { - dbg("%s - no tty", __func__); - return; - } - if (I_IXOFF(tty) || C_CRTSCTS(tty)) ti_stop_read(tport, tty); } -static void ti_unthrottle(struct usb_serial_port *port) +static void ti_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - struct tty_struct *tty; int status; dbg("%s - port %d", __func__, port->number); @@ -806,23 +828,19 @@ static void ti_unthrottle(struct usb_serial_port *port) if (tport == NULL) return; - tty = port->tty; - if (!tty) { - dbg("%s - no tty", __func__); - return; - } - if (I_IXOFF(tty) || C_CRTSCTS(tty)) { status = ti_restart_read(tport, tty); if (status) - dev_err(&port->dev, "%s - cannot restart read, %d\n", __func__, status); + dev_err(&port->dev, "%s - cannot restart read, %d\n", + __func__, status); } } -static int ti_ioctl(struct usb_serial_port *port, struct file *file, +static int ti_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); struct async_icount cnow; struct async_icount cprev; @@ -833,55 +851,52 @@ static int ti_ioctl(struct usb_serial_port *port, struct file *file, return -ENODEV; switch (cmd) { - case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); - return ti_get_serial_info(tport, (struct serial_struct __user *)arg); - break; - - case TIOCSSERIAL: - dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); - return ti_set_serial_info(tport, (struct serial_struct __user *)arg); - break; - - case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); - cprev = tport->tp_icount; - while (1) { - interruptible_sleep_on(&tport->tp_msr_wait); - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = tport->tp_icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; - } - break; - - case TIOCGICOUNT: - dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, tport->tp_icount.rx, tport->tp_icount.tx); - if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount))) - return -EFAULT; - return 0; + case TIOCGSERIAL: + dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + return ti_get_serial_info(tport, + (struct serial_struct __user *)arg); + case TIOCSSERIAL: + dbg("%s - (%d) TIOCSSERIAL", __func__, port->number); + return ti_set_serial_info(tport, + (struct serial_struct __user *)arg); + case TIOCMIWAIT: + dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + cprev = tport->tp_icount; + while (1) { + interruptible_sleep_on(&tport->tp_msr_wait); + if (signal_pending(current)) + return -ERESTARTSYS; + cnow = tport->tp_icount; + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) + return 0; + cprev = cnow; + } + break; + case TIOCGICOUNT: + dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", + __func__, port->number, + tport->tp_icount.rx, tport->tp_icount.tx); + if (copy_to_user((void __user *)arg, &tport->tp_icount, + sizeof(tport->tp_icount))) + return -EFAULT; + return 0; } - return -ENOIOCTLCMD; } -static void ti_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) +static void ti_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct ti_port *tport = usb_get_serial_port_data(port); - struct tty_struct *tty = port->tty; struct ti_uart_config *config; - tcflag_t cflag,iflag; + tcflag_t cflag, iflag; int baud; int status; int port_number = port->number - port->serial->minor; @@ -893,7 +908,8 @@ static void ti_set_termios(struct usb_serial_port *port, iflag = tty->termios->c_iflag; dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag); - dbg("%s - old clfag %08x, old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag); + dbg("%s - old clfag %08x, old iflag %08x", __func__, + old_termios->c_cflag, old_termios->c_iflag); if (tport == NULL) return; @@ -912,19 +928,19 @@ static void ti_set_termios(struct usb_serial_port *port, config->bUartMode = (__u8)(tport->tp_uart_mode); switch (cflag & CSIZE) { - case CS5: - config->bDataBits = TI_UART_5_DATA_BITS; - break; - case CS6: - config->bDataBits = TI_UART_6_DATA_BITS; - break; - case CS7: - config->bDataBits = TI_UART_7_DATA_BITS; - break; - default: - case CS8: - config->bDataBits = TI_UART_8_DATA_BITS; - break; + case CS5: + config->bDataBits = TI_UART_5_DATA_BITS; + break; + case CS6: + config->bDataBits = TI_UART_6_DATA_BITS; + break; + case CS7: + config->bDataBits = TI_UART_7_DATA_BITS; + break; + default: + case CS8: + config->bDataBits = TI_UART_8_DATA_BITS; + break; } /* CMSPAR isn't supported by this driver */ @@ -940,7 +956,7 @@ static void ti_set_termios(struct usb_serial_port *port, } } else { config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; - config->bParity = TI_UART_NO_PARITY; + config->bParity = TI_UART_NO_PARITY; } if (cflag & CSTOPB) @@ -993,7 +1009,8 @@ static void ti_set_termios(struct usb_serial_port *port, (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) - dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __func__, port_number, status); + dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", + __func__, port_number, status); /* SET_CONFIG asserts RTS and DTR, reset them correctly */ mcr = tport->tp_shadow_mcr; @@ -1002,14 +1019,17 @@ static void ti_set_termios(struct usb_serial_port *port, mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); status = ti_set_mcr(tport, mcr); if (status) - dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __func__, port_number, status); + dev_err(&port->dev, + "%s - cannot set modem control on port %d, %d\n", + __func__, port_number, status); kfree(config); } -static int ti_tiocmget(struct usb_serial_port *port, struct file *file) +static int ti_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); unsigned int result; unsigned int msr; @@ -1040,9 +1060,10 @@ static int ti_tiocmget(struct usb_serial_port *port, struct file *file) } -static int ti_tiocmset(struct usb_serial_port *port, struct file *file, +static int ti_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); unsigned int mcr; unsigned long flags; @@ -1074,8 +1095,9 @@ static int ti_tiocmset(struct usb_serial_port *port, struct file *file, } -static void ti_break(struct usb_serial_port *port, int break_state) +static void ti_break(struct tty_struct *tty, int break_state) { + struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); int status; @@ -1141,10 +1163,12 @@ static void ti_interrupt_callback(struct urb *urb) port_number = TI_GET_PORT_FROM_CODE(data[0]); function = TI_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, data 0x%02X", __func__, port_number, function, data[1]); + dbg("%s - port_number %d, function %d, data 0x%02X", + __func__, port_number, function, data[1]); if (port_number >= serial->num_ports) { - dev_err(dev, "%s - bad port number, %d\n", __func__, port_number); + dev_err(dev, "%s - bad port number, %d\n", + __func__, port_number); goto exit; } @@ -1156,7 +1180,8 @@ static void ti_interrupt_callback(struct urb *urb) switch (function) { case TI_CODE_DATA_ERROR: - dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __func__, port_number, data[1]); + dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", + __func__, port_number, data[1]); break; case TI_CODE_MODEM_STATUS: @@ -1166,7 +1191,8 @@ static void ti_interrupt_callback(struct urb *urb) break; default: - dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __func__, data[1]); + dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", + __func__, data[1]); break; } @@ -1200,7 +1226,7 @@ static void ti_bulk_in_callback(struct urb *urb) return; default: dev_err(dev, "%s - nonzero urb status, %d\n", - __func__, status ); + __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); } @@ -1213,15 +1239,16 @@ static void ti_bulk_in_callback(struct urb *urb) return; } - if (port->tty && urb->actual_length) { + if (port->port.tty && urb->actual_length) { usb_serial_debug_data(debug, dev, __func__, urb->actual_length, urb->transfer_buffer); if (!tport->tp_is_open) dbg("%s - port closed, dropping data", __func__); else - ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer, - urb->actual_length); + ti_recv(&urb->dev->dev, port->port.tty, + urb->transfer_buffer, + urb->actual_length); spin_lock(&tport->tp_lock); tport->tp_icount.rx += urb->actual_length; @@ -1285,8 +1312,9 @@ static void ti_recv(struct device *dev, struct tty_struct *tty, do { cnt = tty_buffer_request_room(tty, length); if (cnt < length) { - dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt); - if(cnt == 0) + dev_err(dev, "%s - dropping data, %d bytes lost\n", + __func__, length - cnt); + if (cnt == 0) break; } tty_insert_flip_string(tty, data, cnt); @@ -1302,7 +1330,7 @@ static void ti_send(struct ti_port *tport) { int count, result; struct usb_serial_port *port = tport->tp_port; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; /* FIXME */ unsigned long flags; @@ -1328,7 +1356,8 @@ static void ti_send(struct ti_port *tport) spin_unlock_irqrestore(&tport->tp_lock, flags); - usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, __func__, count, + port->write_urb->transfer_buffer); usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, @@ -1338,8 +1367,9 @@ static void ti_send(struct ti_port *tport) result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - submit write urb failed, %d\n", __func__, result); - tport->tp_write_urb_in_use = 0; + dev_err(&port->dev, "%s - submit write urb failed, %d\n", + __func__, result); + tport->tp_write_urb_in_use = 0; /* TODO: reschedule ti_send */ } else { spin_lock_irqsave(&tport->tp_lock, flags); @@ -1374,7 +1404,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) static int ti_get_lsr(struct ti_port *tport) { - int size,status; + int size, status; struct ti_device *tdev = tport->tp_tdev; struct usb_serial_port *port = tport->tp_port; int port_number = port->number - port->serial->minor; @@ -1392,7 +1422,9 @@ static int ti_get_lsr(struct ti_port *tport) status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); if (status) { - dev_err(&port->dev, "%s - get port status command failed, %d\n", __func__, status); + dev_err(&port->dev, + "%s - get port status command failed, %d\n", + __func__, status); goto free_data; } @@ -1442,8 +1474,9 @@ static int ti_set_serial_info(struct ti_port *tport, return -EFAULT; tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - if (port->tty) - port->tty->low_latency = + /* FIXME */ + if (port->port.tty) + port->port.tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; tport->tp_closing_wait = new_serial.closing_wait; @@ -1477,7 +1510,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) tport->tp_msr = msr & TI_MSR_MASK; /* handle CTS flow control */ - tty = tport->tp_port->tty; + tty = tport->tp_port->port.tty; if (tty && C_CRTSCTS(tty)) { if (msr & TI_MSR_CTS) { tty->hw_stopped = 0; @@ -1627,7 +1660,8 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, struct ti_write_data_bytes *data; struct device *dev = &tdev->td_serial->dev->dev; - dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __func__, addr, mask, byte); + dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", + __func__, addr, mask, byte); size = sizeof(struct ti_write_data_bytes) + 2; data = kmalloc(size, GFP_KERNEL); @@ -1655,67 +1689,68 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr, return status; } - -static int ti_download_firmware(struct ti_device *tdev, - char *fw_name) +static int ti_do_download(struct usb_device *dev, int pipe, + u8 *buffer, int size) { - const struct firmware *fw; - int status = 0; - int buffer_size; int pos; - int len; + u8 cs = 0; int done; - __u8 cs = 0; - __u8 *buffer; - struct usb_device *dev = tdev->td_serial->dev; struct ti_firmware_header *header; - unsigned int pipe = usb_sndbulkpipe(dev, - tdev->td_serial->port[0]->bulk_out_endpointAddress); - - buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); - - if (request_firmware(&fw, fw_name, &dev->dev)) { - dev_err(&dev->dev, "%s - failed to load firmware \"%s\"\n", - __func__, fw_name); - return -ENOENT; - } - if (fw->size > buffer_size) { - dev_err(&dev->dev, "%s - firmware \"%s\" is too large\n", - __func__, fw_name); - release_firmware(fw); - return -EINVAL; - } - - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); - release_firmware(fw); - return -ENOMEM; - } - - memcpy(buffer, fw->data, fw->size); - memset(buffer+fw->size, 0xff, buffer_size-fw->size); + int status; + int len; - for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++) + for (pos = sizeof(struct ti_firmware_header); pos < size; pos++) cs = (__u8)(cs + buffer[pos]); header = (struct ti_firmware_header *)buffer; - header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header))); + header->wLength = cpu_to_le16((__u16)(size + - sizeof(struct ti_firmware_header))); header->bCheckSum = cs; dbg("%s - downloading firmware", __func__); - for (pos = 0; pos < buffer_size; pos += done) { - len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); - status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000); + for (pos = 0; pos < size; pos += done) { + len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); + status = usb_bulk_msg(dev, pipe, buffer + pos, len, + &done, 1000); if (status) break; } + return status; +} - kfree(buffer); - release_firmware(fw); +static int ti_download_firmware(struct ti_device *tdev, int type) +{ + int status = -ENOMEM; + int buffer_size; + __u8 *buffer; + struct usb_device *dev = tdev->td_serial->dev; + unsigned int pipe = usb_sndbulkpipe(dev, + tdev->td_serial->port[0]->bulk_out_endpointAddress); + const struct firmware *fw_p; + char buf[32]; + sprintf(buf, "ti_usb-%d.bin", type); + if (request_firmware(&fw_p, buf, &dev->dev)) { + dev_err(&dev->dev, "%s - firmware not found\n", __func__); + return -ENOENT; + } + if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { + dev_err(&dev->dev, "%s - firmware too large\n", __func__); + return -ENOENT; + } + + buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (buffer) { + memcpy(buffer, fw_p->data, fw_p->size); + memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); + ti_do_download(dev, pipe, buffer, fw_p->size); + kfree(buffer); + } + release_firmware(fw_p); if (status) { - dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status); + dev_err(&dev->dev, "%s - error downloading firmware, %d\n", + __func__, status); return status; } @@ -1787,7 +1822,7 @@ static void ti_buf_clear(struct circ_buf *cb) static int ti_buf_data_avail(struct circ_buf *cb) { - return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE); + return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE); } @@ -1800,7 +1835,7 @@ static int ti_buf_data_avail(struct circ_buf *cb) static int ti_buf_space_avail(struct circ_buf *cb) { - return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE); + return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0cb0d77dc42..8c2d531eede 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -12,7 +12,8 @@ * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * */ @@ -28,7 +29,7 @@ #include <linux/spinlock.h> #include <linux/mutex.h> #include <linux/list.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "pl2303.h" @@ -59,7 +60,8 @@ static struct usb_driver usb_serial_driver = { */ static int debug; -static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */ +/* initially all NULL */ +static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); @@ -76,7 +78,8 @@ struct usb_serial *usb_serial_get_by_index(unsigned index) return serial; } -static struct usb_serial *get_free_serial (struct usb_serial *serial, int num_ports, unsigned int *minor) +static struct usb_serial *get_free_serial(struct usb_serial *serial, + int num_ports, unsigned int *minor) { unsigned int i, j; int good_spot; @@ -122,9 +125,8 @@ static void return_serial(struct usb_serial *serial) if (serial == NULL) return; - for (i = 0; i < serial->num_ports; ++i) { + for (i = 0; i < serial->num_ports; ++i) serial_table[serial->minor + i] = NULL; - } } static void destroy_serial(struct kref *kref) @@ -143,7 +145,7 @@ static void destroy_serial(struct kref *kref) return_serial(serial); for (i = 0; i < serial->num_ports; ++i) - serial->port[i]->open_count = 0; + serial->port[i]->port.count = 0; /* the ports are cleaned up and released in port_release() */ for (i = 0; i < serial->num_ports; ++i) @@ -156,7 +158,8 @@ static void destroy_serial(struct kref *kref) * not get cleaned up in port_release() as it was never registered with * the driver core */ if (serial->num_ports < serial->num_port_pointers) { - for (i = serial->num_ports; i < serial->num_port_pointers; ++i) { + for (i = serial->num_ports; + i < serial->num_port_pointers; ++i) { port = serial->port[i]; if (!port) continue; @@ -167,7 +170,7 @@ static void destroy_serial(struct kref *kref) usb_put_dev(serial->dev); /* free up any memory that we allocated */ - kfree (serial); + kfree(serial); } void usb_serial_put(struct usb_serial *serial) @@ -180,13 +183,13 @@ void usb_serial_put(struct usb_serial *serial) /***************************************************************************** * Driver tty interface functions *****************************************************************************/ -static int serial_open (struct tty_struct *tty, struct file * filp) +static int serial_open (struct tty_struct *tty, struct file *filp) { struct usb_serial *serial; struct usb_serial_port *port; unsigned int portNumber; int retval; - + dbg("%s", __func__); /* get the serial object associated with this tty pointer */ @@ -207,15 +210,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp) retval = -ERESTARTSYS; goto bailout_kref_put; } - - ++port->open_count; + + ++port->port.count; /* set up our port structure making the tty driver * remember our port object, and us it */ tty->driver_data = port; - port->tty = tty; + port->port.tty = tty; - if (port->open_count == 1) { + if (port->port.count == 1) { /* lock this module before we call it * this may fail, which means we must bail out, @@ -228,9 +231,9 @@ static int serial_open (struct tty_struct *tty, struct file * filp) retval = usb_autopm_get_interface(serial->interface); if (retval) goto bailout_module_put; - /* only call the device specific open if this + /* only call the device specific open if this * is the first time the port is opened */ - retval = serial->type->open(port, filp); + retval = serial->type->open(tty, port, filp); if (retval) goto bailout_interface_put; } @@ -243,16 +246,16 @@ bailout_interface_put: bailout_module_put: module_put(serial->type->driver.owner); bailout_mutex_unlock: - port->open_count = 0; + port->port.count = 0; tty->driver_data = NULL; - port->tty = NULL; + port->port.tty = NULL; mutex_unlock(&port->mutex); bailout_kref_put: usb_serial_put(serial); return retval; } -static void serial_close(struct tty_struct *tty, struct file * filp) +static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; @@ -263,27 +266,30 @@ static void serial_close(struct tty_struct *tty, struct file * filp) mutex_lock(&port->mutex); - if (port->open_count == 0) { + if (port->port.count == 0) { mutex_unlock(&port->mutex); return; } - --port->open_count; - if (port->open_count == 0) - /* only call the device specific close if this + --port->port.count; + if (port->port.count == 0) + /* only call the device specific close if this * port is being closed by the last owner */ - port->serial->type->close(port, filp); + port->serial->type->close(tty, port, filp); - if (port->open_count == (port->console? 1 : 0)) { - if (port->tty) { - if (port->tty->driver_data) - port->tty->driver_data = NULL; - port->tty = NULL; + if (port->port.count == (port->console? 1 : 0)) { + if (port->port.tty) { + if (port->port.tty->driver_data) + port->port.tty->driver_data = NULL; + port->port.tty = NULL; } } - if (port->open_count == 0) { - usb_autopm_put_interface(port->serial->interface); + if (port->port.count == 0) { + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) + usb_autopm_put_interface(port->serial->interface); + mutex_unlock(&port->serial->disc_mutex); module_put(port->serial->type->driver.owner); } @@ -291,7 +297,8 @@ static void serial_close(struct tty_struct *tty, struct file * filp) usb_serial_put(port->serial); } -static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count) +static int serial_write(struct tty_struct *tty, const unsigned char *buf, + int count) { struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; @@ -301,107 +308,112 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int dbg("%s - port %d, %d byte(s)", __func__, port->number, count); - /* open_count is managed under the mutex lock for the tty so cannot - drop to zero until after the last close completes */ - WARN_ON(!port->open_count); + /* count is managed under the mutex lock for the tty so cannot + drop to zero until after the last close completes */ + WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ - retval = port->serial->type->write(port, buf, count); + retval = port->serial->type->write(tty, port, buf, count); exit: return retval; } -static int serial_write_room (struct tty_struct *tty) +static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ - return port->serial->type->write_room(port); + return port->serial->type->write_room(tty); } -static int serial_chars_in_buffer (struct tty_struct *tty) +static int serial_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s = port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ - return port->serial->type->chars_in_buffer(port); + return port->serial->type->chars_in_buffer(tty); } -static void serial_throttle (struct tty_struct * tty) +static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) - port->serial->type->throttle(port); + port->serial->type->throttle(tty); } -static void serial_unthrottle (struct tty_struct * tty) +static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) - port->serial->type->unthrottle(port); + port->serial->type->unthrottle(tty); } -static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) +static int serial_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); - /* pass on to the driver specific version of this function if it is available */ + /* pass on to the driver specific version of this function + if it is available */ if (port->serial->type->ioctl) { lock_kernel(); - retval = port->serial->type->ioctl(port, file, cmd, arg); + retval = port->serial->type->ioctl(tty, file, cmd, arg); unlock_kernel(); - } - else + } else retval = -ENOIOCTLCMD; return retval; } -static void serial_set_termios (struct tty_struct *tty, struct ktermios * old) +static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); - /* pass on to the driver specific version of this function if it is available */ + WARN_ON(!port->port.count); + /* pass on to the driver specific version of this function + if it is available */ if (port->serial->type->set_termios) - port->serial->type->set_termios(port, old); + port->serial->type->set_termios(tty, port, old); else tty_termios_copy_hw(tty->termios, old); } -static void serial_break (struct tty_struct *tty, int break_state) +static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); - /* pass on to the driver specific version of this function if it is available */ + WARN_ON(!port->port.count); + /* pass on to the driver specific version of this function + if it is available */ if (port->serial->type->break_ctl) { lock_kernel(); - port->serial->type->break_ctl(port, break_state); + port->serial->type->break_ctl(tty, break_state); unlock_kernel(); } + return 0; } -static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data) +static int serial_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) { struct usb_serial *serial; int length = 0; @@ -410,26 +422,29 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __func__); - length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); + length += sprintf(page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) continue; - length += sprintf (page+length, "%d:", i); + length += sprintf(page+length, "%d:", i); if (serial->type->driver.owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->description); - length += sprintf (page+length, " vendor:%04x product:%04x", - le16_to_cpu(serial->dev->descriptor.idVendor), - le16_to_cpu(serial->dev->descriptor.idProduct)); - length += sprintf (page+length, " num_ports:%d", serial->num_ports); - length += sprintf (page+length, " port:%d", i - serial->minor + 1); - + length += sprintf(page+length, " module:%s", + module_name(serial->type->driver.owner)); + length += sprintf(page+length, " name:\"%s\"", + serial->type->description); + length += sprintf(page+length, " vendor:%04x product:%04x", + le16_to_cpu(serial->dev->descriptor.idVendor), + le16_to_cpu(serial->dev->descriptor.idProduct)); + length += sprintf(page+length, " num_ports:%d", + serial->num_ports); + length += sprintf(page+length, " port:%d", + i - serial->minor + 1); usb_make_path(serial->dev, tmp, sizeof(tmp)); - length += sprintf (page+length, " path:%s", tmp); - - length += sprintf (page+length, "\n"); + length += sprintf(page+length, " path:%s", tmp); + + length += sprintf(page+length, "\n"); if ((length + begin) > (off + count)) { usb_serial_put(serial); goto done; @@ -445,31 +460,31 @@ done: if (off >= (length + begin)) return 0; *start = page + (off-begin); - return ((count < begin+length-off) ? count : begin+length-off); + return (count < begin+length-off) ? count : begin+length-off; } -static int serial_tiocmget (struct tty_struct *tty, struct file *file) +static int serial_tiocmget(struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); if (port->serial->type->tiocmget) - return port->serial->type->tiocmget(port, file); + return port->serial->type->tiocmget(tty, file); return -EINVAL; } -static int serial_tiocmset (struct tty_struct *tty, struct file *file, +static int serial_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; dbg("%s - port %d", __func__, port->number); - WARN_ON(!port->open_count); + WARN_ON(!port->port.count); if (port->serial->type->tiocmset) - return port->serial->type->tiocmset(port, file, set, clear); + return port->serial->type->tiocmset(tty, file, set, clear); return -EINVAL; } @@ -482,6 +497,7 @@ void usb_serial_port_softint(struct usb_serial_port *port) { schedule_work(&port->work); } +EXPORT_SYMBOL_GPL(usb_serial_port_softint); static void usb_serial_port_work(struct work_struct *work) { @@ -490,11 +506,11 @@ static void usb_serial_port_work(struct work_struct *work) struct tty_struct *tty; dbg("%s - port %d", __func__, port->number); - + if (!port) return; - tty = port->tty; + tty = port->port.tty; if (!tty) return; @@ -505,7 +521,7 @@ static void port_release(struct device *dev) { struct usb_serial_port *port = to_usb_serial_port(dev); - dbg ("%s - %s", __func__, dev->bus_id); + dbg ("%s - %s", __func__, dev_name(dev)); port_free(port); } @@ -543,9 +559,9 @@ static void port_free(struct usb_serial_port *port) kfree(port); } -static struct usb_serial * create_serial (struct usb_device *dev, - struct usb_interface *interface, - struct usb_serial_driver *driver) +static struct usb_serial *create_serial(struct usb_device *dev, + struct usb_interface *interface, + struct usb_serial_driver *driver) { struct usb_serial *serial; @@ -564,7 +580,7 @@ static struct usb_serial * create_serial (struct usb_device *dev, } static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf, - struct usb_serial_driver *drv) + struct usb_serial_driver *drv) { struct usb_dynid *dynid; @@ -596,7 +612,8 @@ exit: return id; } -static struct usb_serial_driver *search_serial_device(struct usb_interface *iface) +static struct usb_serial_driver *search_serial_device( + struct usb_interface *iface) { const struct usb_device_id *id; struct usb_serial_driver *drv; @@ -614,7 +631,7 @@ static struct usb_serial_driver *search_serial_device(struct usb_interface *ifac int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { - struct usb_device *dev = interface_to_usbdev (interface); + struct usb_device *dev = interface_to_usbdev(interface); struct usb_serial *serial = NULL; struct usb_serial_port *port; struct usb_host_interface *iface_desc; @@ -625,7 +642,7 @@ int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; struct usb_serial_driver *type = NULL; int retval; - int minor; + unsigned int minor; int buffer_size; int i; int num_interrupt_in = 0; @@ -643,7 +660,7 @@ int usb_serial_probe(struct usb_interface *interface, return -ENODEV; } - serial = create_serial (dev, interface, type); + serial = create_serial(dev, interface, type); if (!serial) { unlock_kernel(); dev_err(&interface->dev, "%s - out of memory\n", __func__); @@ -656,8 +673,9 @@ int usb_serial_probe(struct usb_interface *interface, if (!try_module_get(type->driver.owner)) { unlock_kernel(); - dev_err(&interface->dev, "module get failed, exiting\n"); - kfree (serial); + dev_err(&interface->dev, + "module get failed, exiting\n"); + kfree(serial); return -EIO; } @@ -667,8 +685,8 @@ int usb_serial_probe(struct usb_interface *interface, if (retval) { unlock_kernel(); - dbg ("sub driver rejected device"); - kfree (serial); + dbg("sub driver rejected device"); + kfree(serial); return retval; } } @@ -709,7 +727,7 @@ int usb_serial_probe(struct usb_interface *interface, } #if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE) - /* BEGIN HORRIBLE HACK FOR PL2303 */ + /* BEGIN HORRIBLE HACK FOR PL2303 */ /* this is needed due to the looney way its endpoints are set up */ if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) || @@ -738,7 +756,7 @@ int usb_serial_probe(struct usb_interface *interface, if (num_bulk_in == 0 || num_bulk_out == 0) { unlock_kernel(); dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); - kfree (serial); + kfree(serial); return -ENODEV; } } @@ -750,8 +768,9 @@ int usb_serial_probe(struct usb_interface *interface, num_ports = num_bulk_out; if (num_ports == 0) { unlock_kernel(); - dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); - kfree (serial); + dev_err(&interface->dev, + "Generic device with no bulk out, not allowed.\n"); + kfree(serial); return -EIO; } } @@ -761,11 +780,12 @@ int usb_serial_probe(struct usb_interface *interface, if (type->calc_num_ports) { if (!try_module_get(type->driver.owner)) { unlock_kernel(); - dev_err(&interface->dev, "module get failed, exiting\n"); - kfree (serial); + dev_err(&interface->dev, + "module get failed, exiting\n"); + kfree(serial); return -EIO; } - num_ports = type->calc_num_ports (serial); + num_ports = type->calc_num_ports(serial); module_put(type->driver.owner); } if (!num_ports) @@ -783,7 +803,8 @@ int usb_serial_probe(struct usb_interface *interface, type->description); /* create our ports, we need as many as the max endpoints */ - /* we don't use num_ports here cauz some devices have more endpoint pairs than ports */ + /* we don't use num_ports here because some devices have more + endpoint pairs than ports */ max_endpoints = max(num_bulk_in, num_bulk_out); max_endpoints = max(max_endpoints, num_interrupt_in); max_endpoints = max(max_endpoints, num_interrupt_out); @@ -791,7 +812,8 @@ int usb_serial_probe(struct usb_interface *interface, serial->num_port_pointers = max_endpoints; unlock_kernel(); - dbg("%s - setting up %d port structures for this device", __func__, max_endpoints); + dbg("%s - setting up %d port structures for this device", + __func__, max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -807,7 +829,7 @@ int usb_serial_probe(struct usb_interface *interface, for (i = 0; i < num_bulk_in; ++i) { endpoint = bulk_in_endpoint[i]; port = serial->port[i]; - port->read_urb = usb_alloc_urb (0, GFP_KERNEL); + port->read_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->read_urb) { dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; @@ -815,17 +837,17 @@ int usb_serial_probe(struct usb_interface *interface, buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; - port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL); + port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_in_buffer) { - dev_err(&interface->dev, "Couldn't allocate bulk_in_buffer\n"); + dev_err(&interface->dev, + "Couldn't allocate bulk_in_buffer\n"); goto probe_error; } - usb_fill_bulk_urb (port->read_urb, dev, - usb_rcvbulkpipe (dev, - endpoint->bEndpointAddress), - port->bulk_in_buffer, buffer_size, - serial->type->read_bulk_callback, - port); + usb_fill_bulk_urb(port->read_urb, dev, + usb_rcvbulkpipe(dev, + endpoint->bEndpointAddress), + port->bulk_in_buffer, buffer_size, + serial->type->read_bulk_callback, port); } for (i = 0; i < num_bulk_out; ++i) { @@ -839,17 +861,17 @@ int usb_serial_probe(struct usb_interface *interface, buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; - port->bulk_out_buffer = kmalloc (buffer_size, GFP_KERNEL); + port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!port->bulk_out_buffer) { - dev_err(&interface->dev, "Couldn't allocate bulk_out_buffer\n"); + dev_err(&interface->dev, + "Couldn't allocate bulk_out_buffer\n"); goto probe_error; } - usb_fill_bulk_urb (port->write_urb, dev, - usb_sndbulkpipe (dev, - endpoint->bEndpointAddress), - port->bulk_out_buffer, buffer_size, - serial->type->write_bulk_callback, - port); + usb_fill_bulk_urb(port->write_urb, dev, + usb_sndbulkpipe(dev, + endpoint->bEndpointAddress), + port->bulk_out_buffer, buffer_size, + serial->type->write_bulk_callback, port); } if (serial->type->read_int_callback) { @@ -858,73 +880,82 @@ int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_in_urb) { - dev_err(&interface->dev, "No free urbs available\n"); + dev_err(&interface->dev, + "No free urbs available\n"); goto probe_error; } buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; - port->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL); + port->interrupt_in_endpointAddress = + endpoint->bEndpointAddress; + port->interrupt_in_buffer = kmalloc(buffer_size, + GFP_KERNEL); if (!port->interrupt_in_buffer) { - dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n"); + dev_err(&interface->dev, + "Couldn't allocate interrupt_in_buffer\n"); goto probe_error; } - usb_fill_int_urb (port->interrupt_in_urb, dev, - usb_rcvintpipe (dev, - endpoint->bEndpointAddress), - port->interrupt_in_buffer, buffer_size, - serial->type->read_int_callback, port, - endpoint->bInterval); + usb_fill_int_urb(port->interrupt_in_urb, dev, + usb_rcvintpipe(dev, + endpoint->bEndpointAddress), + port->interrupt_in_buffer, buffer_size, + serial->type->read_int_callback, port, + endpoint->bInterval); } } else if (num_interrupt_in) { dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined"); } - + if (serial->type->write_int_callback) { for (i = 0; i < num_interrupt_out; ++i) { endpoint = interrupt_out_endpoint[i]; port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!port->interrupt_out_urb) { - dev_err(&interface->dev, "No free urbs available\n"); + dev_err(&interface->dev, + "No free urbs available\n"); goto probe_error; } buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->interrupt_out_size = buffer_size; - port->interrupt_out_endpointAddress = endpoint->bEndpointAddress; - port->interrupt_out_buffer = kmalloc (buffer_size, GFP_KERNEL); + port->interrupt_out_endpointAddress = + endpoint->bEndpointAddress; + port->interrupt_out_buffer = kmalloc(buffer_size, + GFP_KERNEL); if (!port->interrupt_out_buffer) { - dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n"); + dev_err(&interface->dev, + "Couldn't allocate interrupt_out_buffer\n"); goto probe_error; } - usb_fill_int_urb (port->interrupt_out_urb, dev, - usb_sndintpipe (dev, - endpoint->bEndpointAddress), - port->interrupt_out_buffer, buffer_size, - serial->type->write_int_callback, port, - endpoint->bInterval); + usb_fill_int_urb(port->interrupt_out_urb, dev, + usb_sndintpipe(dev, + endpoint->bEndpointAddress), + port->interrupt_out_buffer, buffer_size, + serial->type->write_int_callback, port, + endpoint->bInterval); } } else if (num_interrupt_out) { dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined"); } - + /* if this device type has an attach function, call it */ if (type->attach) { if (!try_module_get(type->driver.owner)) { - dev_err(&interface->dev, "module get failed, exiting\n"); + dev_err(&interface->dev, + "module get failed, exiting\n"); goto probe_error; } - retval = type->attach (serial); + retval = type->attach(serial); module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { - /* quietly accept this device, but don't bind to a serial port - * as it's about to disappear */ + /* quietly accept this device, but don't bind to a + serial port as it's about to disappear */ goto exit; } } - if (get_free_serial (serial, num_ports, &minor) == NULL) { + if (get_free_serial(serial, num_ports, &minor) == NULL) { dev_err(&interface->dev, "No more free serial devices\n"); goto probe_error; } @@ -938,19 +969,19 @@ int usb_serial_probe(struct usb_interface *interface, port->dev.bus = &usb_serial_bus_type; port->dev.release = &port_release; - snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number); - dbg ("%s - registering %s", __func__, port->dev.bus_id); + dev_set_name(&port->dev, "ttyUSB%d", port->number); + dbg ("%s - registering %s", __func__, dev_name(&port->dev)); retval = device_register(&port->dev); if (retval) dev_err(&port->dev, "Error registering port device, " "continuing\n"); } - usb_serial_console_init (debug, minor); + usb_serial_console_init(debug, minor); exit: /* success */ - usb_set_intfdata (interface, serial); + usb_set_intfdata(interface, serial); return 0; probe_error: @@ -986,29 +1017,30 @@ probe_error: /* free up any memory that we allocated */ for (i = 0; i < serial->num_port_pointers; ++i) kfree(serial->port[i]); - kfree (serial); + kfree(serial); return -EIO; } +EXPORT_SYMBOL_GPL(usb_serial_probe); void usb_serial_disconnect(struct usb_interface *interface) { int i; - struct usb_serial *serial = usb_get_intfdata (interface); + struct usb_serial *serial = usb_get_intfdata(interface); struct device *dev = &interface->dev; struct usb_serial_port *port; usb_serial_console_disconnect(serial); - dbg ("%s", __func__); + dbg("%s", __func__); mutex_lock(&serial->disc_mutex); - usb_set_intfdata (interface, NULL); + usb_set_intfdata(interface, NULL); /* must set a flag, to signal subdrivers */ serial->disconnected = 1; for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) { - if (port->tty) - tty_hangup(port->tty); + if (port->port.tty) + tty_hangup(port->port.tty); kill_traffic(port); } } @@ -1018,6 +1050,7 @@ void usb_serial_disconnect(struct usb_interface *interface) usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } +EXPORT_SYMBOL_GPL(usb_serial_disconnect); int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) { @@ -1076,9 +1109,8 @@ static int __init usb_serial_init(void) return -ENOMEM; /* Initialize our global data */ - for (i = 0; i < SERIAL_TTY_MINORS; ++i) { + for (i = 0; i < SERIAL_TTY_MINORS; ++i) serial_table[i] = NULL; - } result = bus_register(&usb_serial_bus_type); if (result) { @@ -1093,9 +1125,11 @@ static int __init usb_serial_init(void) usb_serial_tty_driver->minor_start = 0; usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL; - usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; usb_serial_tty_driver->init_termios = tty_std_termios; - usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD + | HUPCL | CLOCAL; usb_serial_tty_driver->init_termios.c_ispeed = 9600; usb_serial_tty_driver->init_termios.c_ospeed = 9600; tty_set_operations(usb_serial_tty_driver, &serial_ops); @@ -1133,7 +1167,7 @@ exit_reg_driver: bus_unregister(&usb_serial_bus_type); exit_bus: - err ("%s - returning with error %d", __func__, result); + err("%s - returning with error %d", __func__, result); put_tty_driver(usb_serial_tty_driver); return result; } @@ -1160,7 +1194,7 @@ module_exit(usb_serial_exit); if (!type->function) { \ type->function = usb_serial_generic_##function; \ dbg("Had to override the " #function \ - " usb serial operation with the generic one.");\ + " usb serial operation with the generic one.");\ } \ } while (0) @@ -1177,8 +1211,9 @@ static void fixup_generic(struct usb_serial_driver *device) set_to_generic_if_null(device, resume); } -int usb_serial_register(struct usb_serial_driver *driver) /* must be called with BKL held */ +int usb_serial_register(struct usb_serial_driver *driver) { + /* must be called with BKL held */ int retval; fixup_generic(driver); @@ -1191,37 +1226,30 @@ int usb_serial_register(struct usb_serial_driver *driver) /* must be called with retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, driver->description); + err("problem %d when registering driver %s", + retval, driver->description); list_del(&driver->driver_list); - } - else - info("USB Serial support registered for %s", driver->description); + } else + info("USB Serial support registered for %s", + driver->description); return retval; } +EXPORT_SYMBOL_GPL(usb_serial_register); -void usb_serial_deregister(struct usb_serial_driver *device) /* must be called with BKL held */ +void usb_serial_deregister(struct usb_serial_driver *device) { + /* must be called with BKL held */ info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } - - - -/* If the usb-serial core is built into the core, the usb-serial drivers - need these symbols to load properly as modules. */ -EXPORT_SYMBOL_GPL(usb_serial_register); EXPORT_SYMBOL_GPL(usb_serial_deregister); -EXPORT_SYMBOL_GPL(usb_serial_probe); -EXPORT_SYMBOL_GPL(usb_serial_disconnect); -EXPORT_SYMBOL_GPL(usb_serial_port_softint); - /* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index f9fc926b56d..fc5d9952b03 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -15,6 +15,8 @@ #include <linux/usb.h> #include <linux/usb/serial.h> +#define USB_DEBUG_MAX_PACKET_SIZE 8 + static struct usb_device_id id_table [] = { { USB_DEVICE(0x0525, 0x127a) }, { }, @@ -29,6 +31,13 @@ static struct usb_driver debug_driver = { .no_dynamic_id = 1, }; +int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE; + return usb_serial_generic_open(tty, port, filp); +} + static struct usb_serial_driver debug_device = { .driver = { .owner = THIS_MODULE, @@ -36,6 +45,7 @@ static struct usb_serial_driver debug_device = { }, .id_table = id_table, .num_ports = 1, + .open = usb_debug_open, }; static int __init debug_init(void) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 5fc20122145..cf8924f9a2c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -9,7 +9,8 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * */ @@ -23,7 +24,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include "visor.h" @@ -35,25 +36,29 @@ #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" /* function prototypes for a handspring visor */ -static int visor_open (struct usb_serial_port *port, struct file *filp); -static void visor_close (struct usb_serial_port *port, struct file *filp); -static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int visor_write_room (struct usb_serial_port *port); -static int visor_chars_in_buffer (struct usb_serial_port *port); -static void visor_throttle (struct usb_serial_port *port); -static void visor_unthrottle (struct usb_serial_port *port); -static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id); +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static void visor_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp); +static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int visor_write_room(struct tty_struct *tty); +static void visor_throttle(struct tty_struct *tty); +static void visor_unthrottle(struct tty_struct *tty); +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id); static int visor_calc_num_ports(struct usb_serial *serial); -static void visor_shutdown (struct usb_serial *serial); -static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void visor_write_bulk_callback (struct urb *urb); -static void visor_read_bulk_callback (struct urb *urb); -static void visor_read_int_callback (struct urb *urb); -static int clie_3_5_startup (struct usb_serial *serial); -static int treo_attach (struct usb_serial *serial); -static int clie_5_attach (struct usb_serial *serial); -static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id); -static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id); +static void visor_shutdown(struct usb_serial *serial); +static void visor_write_bulk_callback(struct urb *urb); +static void visor_read_bulk_callback(struct urb *urb); +static void visor_read_int_callback(struct urb *urb); +static int clie_3_5_startup(struct usb_serial *serial); +static int treo_attach(struct usb_serial *serial); +static int clie_5_attach(struct usb_serial *serial); +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id); /* Parameters that may be passed into the module. */ static int debug; @@ -105,13 +110,13 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, - { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), + { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, @@ -170,7 +175,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver visor_driver = { .name = "visor", @@ -180,7 +185,8 @@ static struct usb_driver visor_driver = { .no_dynamic_id = 1, }; -/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ +/* All of the device info needed for the Handspring Visor, + and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { .driver = { .owner = THIS_MODULE, @@ -198,10 +204,8 @@ static struct usb_serial_driver handspring_device = { .probe = visor_probe, .calc_num_ports = visor_calc_num_ports, .shutdown = visor_shutdown, - .ioctl = visor_ioctl, .write = visor_write, .write_room = visor_write_room, - .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, .read_int_callback = visor_read_int_callback, @@ -225,10 +229,8 @@ static struct usb_serial_driver clie_5_device = { .probe = visor_probe, .calc_num_ports = visor_calc_num_ports, .shutdown = visor_shutdown, - .ioctl = visor_ioctl, .write = visor_write, .write_room = visor_write_room, - .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, .read_int_callback = visor_read_int_callback, @@ -249,10 +251,8 @@ static struct usb_serial_driver clie_3_5_device = { .throttle = visor_throttle, .unthrottle = visor_unthrottle, .attach = clie_3_5_startup, - .ioctl = visor_ioctl, .write = visor_write, .write_room = visor_write_room, - .chars_in_buffer = visor_chars_in_buffer, .write_bulk_callback = visor_write_bulk_callback, .read_bulk_callback = visor_read_bulk_callback, }; @@ -274,7 +274,8 @@ static int stats; /****************************************************************************** * Handspring Visor specific driver functions ******************************************************************************/ -static int visor_open (struct usb_serial_port *port, struct file *filp) +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) { struct usb_serial *serial = port->serial; struct visor_private *priv = usb_get_serial_port_data(port); @@ -300,42 +301,45 @@ static int visor_open (struct usb_serial_port *port, struct file *filp) * through, otherwise it is scheduled, and with high data rates (like * with OHCI) data can get lost. */ - if (port->tty) - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; /* Start reading from the device */ - usb_fill_bulk_urb (port->read_urb, serial->dev, - usb_rcvbulkpipe (serial->dev, + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) { - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); goto exit; } - + if (port->interrupt_in_urb) { dbg("%s - adding interrupt input for treo", __func__); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) - dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", - __func__, result); + dev_err(&port->dev, + "%s - failed submitting interrupt urb, error %d\n", + __func__, result); } -exit: +exit: return result; } -static void visor_close (struct usb_serial_port *port, struct file * filp) +static void visor_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct visor_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; dbg("%s - port %d", __func__, port->number); - + /* shutdown our urbs */ usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); @@ -343,14 +347,14 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) { /* Try to send shutdown message, unless the device is gone */ - transfer_buffer = kmalloc (0x12, GFP_KERNEL); + transfer_buffer = kmalloc(0x12, GFP_KERNEL); if (transfer_buffer) { - usb_control_msg (port->serial->dev, + usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), VISOR_CLOSE_NOTIFICATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); - kfree (transfer_buffer); + kfree(transfer_buffer); } } mutex_unlock(&port->serial->disc_mutex); @@ -361,7 +365,8 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) } -static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count) +static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { struct visor_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; @@ -381,7 +386,7 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, priv->outstanding_urbs++; spin_unlock_irqrestore(&priv->lock, flags); - buffer = kmalloc (count, GFP_ATOMIC); + buffer = kmalloc(count, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; @@ -395,21 +400,22 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, goto error_no_urb; } - memcpy (buffer, buf, count); + memcpy(buffer, buf, count); usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); - usb_fill_bulk_urb (urb, serial->dev, - usb_sndbulkpipe (serial->dev, + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), - buffer, count, + buffer, count, visor_write_bulk_callback, port); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", - __func__, status); + dev_err(&port->dev, + "%s - usb_submit_urb(write bulk) failed with status = %d\n", + __func__, status); count = status; goto error; } else { @@ -435,8 +441,9 @@ error_no_buffer: } -static int visor_write_room (struct usb_serial_port *port) +static int visor_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct visor_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -460,23 +467,7 @@ static int visor_write_room (struct usb_serial_port *port) } -static int visor_chars_in_buffer (struct usb_serial_port *port) -{ - dbg("%s - port %d", __func__, port->number); - - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device, so just tell the tty layer that everything - * is flushed. - * - * FIXME: Should walk outstanding_urbs - */ - return 0; -} - - -static void visor_write_bulk_callback (struct urb *urb) +static void visor_write_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct visor_private *priv = usb_get_serial_port_data(port); @@ -484,7 +475,7 @@ static void visor_write_bulk_callback (struct urb *urb) unsigned long flags; /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree (urb->transfer_buffer); + kfree(urb->transfer_buffer); dbg("%s - port %d", __func__, port->number); @@ -500,7 +491,7 @@ static void visor_write_bulk_callback (struct urb *urb) } -static void visor_read_bulk_callback (struct urb *urb) +static void visor_read_bulk_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct visor_private *priv = usb_get_serial_port_data(port); @@ -518,11 +509,13 @@ static void visor_read_bulk_callback (struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, data); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { - available_room = tty_buffer_request_room(tty, urb->actual_length); + available_room = tty_buffer_request_room(tty, + urb->actual_length); if (available_room) { tty_insert_flip_string(tty, data, available_room); tty_flip_buffer_push(tty); @@ -536,22 +529,23 @@ static void visor_read_bulk_callback (struct urb *urb) /* Continue trying to always read if we should */ if (!priv->throttled) { - usb_fill_bulk_urb (port->read_urb, port->serial->dev, + usb_fill_bulk_urb(port->read_urb, port->serial->dev, usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), + port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); - } else { + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); + } else priv->actually_throttled = 1; - } spin_unlock(&priv->lock); } -static void visor_read_int_callback (struct urb *urb) +static void visor_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; int status = urb->status; @@ -585,14 +579,16 @@ static void visor_read_int_callback (struct urb *urb) urb->actual_length, urb->transfer_buffer); exit: - result = usb_submit_urb (urb, GFP_ATOMIC); + result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", - __func__, result); + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); } -static void visor_throttle (struct usb_serial_port *port) +static void visor_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct visor_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -603,8 +599,9 @@ static void visor_throttle (struct usb_serial_port *port) } -static void visor_unthrottle (struct usb_serial_port *port) +static void visor_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct visor_private *priv = usb_get_serial_port_data(port); unsigned long flags; int result; @@ -618,10 +615,13 @@ static void visor_unthrottle (struct usb_serial_port *port) port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (result) - dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); } -static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id) +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id) { struct device *dev = &serial->dev->dev; struct visor_connection_info *connection_info; @@ -633,7 +633,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i dbg("%s", __func__); - transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, sizeof(*connection_info)); @@ -641,7 +641,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i } /* send a get connection info request */ - retval = usb_control_msg (serial->dev, + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_GET_CONNECTION_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, @@ -653,29 +653,31 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i } if (retval == sizeof(*connection_info)) { - connection_info = (struct visor_connection_info *)transfer_buffer; + connection_info = (struct visor_connection_info *) + transfer_buffer; num_ports = le16_to_cpu(connection_info->num_ports); for (i = 0; i < num_ports; ++i) { - switch (connection_info->connections[i].port_function_id) { - case VISOR_FUNCTION_GENERIC: - string = "Generic"; - break; - case VISOR_FUNCTION_DEBUGGER: - string = "Debugger"; - break; - case VISOR_FUNCTION_HOTSYNC: - string = "HotSync"; - break; - case VISOR_FUNCTION_CONSOLE: - string = "Console"; - break; - case VISOR_FUNCTION_REMOTE_FILE_SYS: - string = "Remote File System"; - break; - default: - string = "unknown"; - break; + switch ( + connection_info->connections[i].port_function_id) { + case VISOR_FUNCTION_GENERIC: + string = "Generic"; + break; + case VISOR_FUNCTION_DEBUGGER: + string = "Debugger"; + break; + case VISOR_FUNCTION_HOTSYNC: + string = "HotSync"; + break; + case VISOR_FUNCTION_CONSOLE: + string = "Console"; + break; + case VISOR_FUNCTION_REMOTE_FILE_SYS: + string = "Remote File System"; + break; + default: + string = "unknown"; + break; } dev_info(dev, "%s: port %d, is for %s use\n", serial->type->description, @@ -686,11 +688,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i * Handle devices that report invalid stuff here. */ if (num_ports == 0 || num_ports > 2) { - dev_warn (dev, "%s: No valid connect info available\n", + dev_warn(dev, "%s: No valid connect info available\n", serial->type->description); num_ports = 2; } - + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); @@ -700,8 +702,9 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ usb_set_serial_data(serial, (void *)(long)num_ports); - /* ask for the number of bytes available, but ignore the response as it is broken */ - retval = usb_control_msg (serial->dev, + /* ask for the number of bytes available, but ignore the + response as it is broken */ + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_REQUEST_BYTES_AVAILABLE, 0xc2, 0x0000, 0x0005, transfer_buffer, @@ -712,12 +715,13 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i retval = 0; exit: - kfree (transfer_buffer); + kfree(transfer_buffer); return retval; } -static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_id *id) +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id) { struct device *dev = &serial->dev->dev; struct palm_ext_connection_info *connection_info; @@ -726,18 +730,18 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i dbg("%s", __func__); - transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL); + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); if (!transfer_buffer) { dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__, sizeof(*connection_info)); return -ENOMEM; } - retval = usb_control_msg (serial->dev, - usb_rcvctrlpipe(serial->dev, 0), + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), PALM_GET_EXT_CONNECTION_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, - sizeof (*connection_info), 300); + sizeof(*connection_info), 300); if (retval < 0) dev_err(dev, "%s - error %d getting connection info\n", __func__, retval); @@ -745,15 +749,17 @@ static int palm_os_4_probe (struct usb_serial *serial, const struct usb_device_i usb_serial_debug_data(debug, &serial->dev->dev, __func__, retval, transfer_buffer); - kfree (transfer_buffer); + kfree(transfer_buffer); return 0; } -static int visor_probe (struct usb_serial *serial, const struct usb_device_id *id) +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id) { int retval = 0; - int (*startup) (struct usb_serial *serial, const struct usb_device_id *id); + int (*startup)(struct usb_serial *serial, + const struct usb_device_id *id); dbg("%s", __func__); @@ -771,7 +777,7 @@ static int visor_probe (struct usb_serial *serial, const struct usb_device_id *i return retval; } -static int visor_calc_num_ports (struct usb_serial *serial) +static int visor_calc_num_ports(struct usb_serial *serial) { int num_ports = (int)(long)(usb_get_serial_data(serial)); @@ -788,7 +794,7 @@ static int generic_startup(struct usb_serial *serial) int i; for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc (sizeof(*priv), GFP_KERNEL); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { while (i-- != 0) { priv = usb_get_serial_port_data(ports[i]); @@ -803,7 +809,7 @@ static int generic_startup(struct usb_serial *serial) return 0; } -static int clie_3_5_startup (struct usb_serial *serial) +static int clie_3_5_startup(struct usb_serial *serial) { struct device *dev = &serial->dev->dev; int result; @@ -816,62 +822,72 @@ static int clie_3_5_startup (struct usb_serial *serial) */ /* get the config number */ - result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQ_GET_CONFIGURATION, USB_DIR_IN, 0, 0, &data, 1, 3000); if (result < 0) { - dev_err(dev, "%s: get config number failed: %d\n", __func__, result); + dev_err(dev, "%s: get config number failed: %d\n", + __func__, result); return result; } if (result != 1) { - dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result); + dev_err(dev, "%s: get config number bad return length: %d\n", + __func__, result); return -EIO; } /* get the interface number */ - result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), - USB_REQ_GET_INTERFACE, + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQ_GET_INTERFACE, USB_DIR_IN | USB_RECIP_INTERFACE, 0, 0, &data, 1, 3000); if (result < 0) { - dev_err(dev, "%s: get interface number failed: %d\n", __func__, result); + dev_err(dev, "%s: get interface number failed: %d\n", + __func__, result); return result; } if (result != 1) { - dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result); + dev_err(dev, + "%s: get interface number bad return length: %d\n", + __func__, result); return -EIO; } return generic_startup(serial); } - -static int treo_attach (struct usb_serial *serial) + +static int treo_attach(struct usb_serial *serial) { struct usb_serial_port *swap_port; /* Only do this endpoint hack for the Handspring devices with * interrupt in endpoints, which for now are the Treo devices. */ - if (!((le16_to_cpu(serial->dev->descriptor.idVendor) == HANDSPRING_VENDOR_ID) || - (le16_to_cpu(serial->dev->descriptor.idVendor) == KYOCERA_VENDOR_ID)) || - (serial->num_interrupt_in == 0)) + if (!((le16_to_cpu(serial->dev->descriptor.idVendor) + == HANDSPRING_VENDOR_ID) || + (le16_to_cpu(serial->dev->descriptor.idVendor) + == KYOCERA_VENDOR_ID)) || + (serial->num_interrupt_in == 0)) goto generic_startup; dbg("%s", __func__); /* - * It appears that Treos and Kyoceras want to use the - * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, - * so let's swap the 1st and 2nd bulk in and interrupt endpoints. - * Note that swapping the bulk out endpoints would break lots of + * It appears that Treos and Kyoceras want to use the + * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, + * so let's swap the 1st and 2nd bulk in and interrupt endpoints. + * Note that swapping the bulk out endpoints would break lots of * apps that want to communicate on the second port. */ #define COPY_PORT(dest, src) \ - dest->read_urb = src->read_urb; \ - dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress; \ - dest->bulk_in_buffer = src->bulk_in_buffer; \ - dest->interrupt_in_urb = src->interrupt_in_urb; \ - dest->interrupt_in_endpointAddress = src->interrupt_in_endpointAddress; \ - dest->interrupt_in_buffer = src->interrupt_in_buffer; + do { \ + dest->read_urb = src->read_urb; \ + dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ + dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_endpointAddress = \ + src->interrupt_in_endpointAddress;\ + dest->interrupt_in_buffer = src->interrupt_in_buffer; \ + } while (0); swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL); if (!swap_port) @@ -885,28 +901,30 @@ generic_startup: return generic_startup(serial); } -static int clie_5_attach (struct usb_serial *serial) +static int clie_5_attach(struct usb_serial *serial) { dbg("%s", __func__); - /* TH55 registers 2 ports. - Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0 - Communication out to the UX50/TH55 uses bulk_out_endpointAddress from port 1 - + /* TH55 registers 2 ports. + Communication in from the UX50/TH55 uses bulk_in_endpointAddress + from port 0. Communication out to the UX50/TH55 uses + bulk_out_endpointAddress from port 1 + Lets do a quick and dirty mapping */ - + /* some sanity check */ if (serial->num_ports < 2) return -1; - + /* port 0 now uses the modified endpoint Address */ - serial->port[0]->bulk_out_endpointAddress = serial->port[1]->bulk_out_endpointAddress; + serial->port[0]->bulk_out_endpointAddress = + serial->port[1]->bulk_out_endpointAddress; return generic_startup(serial); } -static void visor_shutdown (struct usb_serial *serial) +static void visor_shutdown(struct usb_serial *serial) { struct visor_private *priv; int i; @@ -922,37 +940,35 @@ static void visor_shutdown (struct usb_serial *serial) } } -static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) -{ - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - - return -ENOIOCTLCMD; -} - -static int __init visor_init (void) +static int __init visor_init(void) { int i, retval; /* Only if parameters were passed to us */ - if ((vendor>0) && (product>0)) { - struct usb_device_id usb_dev_temp[]= - {{USB_DEVICE(vendor, product), - .driver_info = (kernel_ulong_t)&palm_os_4_probe }}; + if (vendor > 0 && product > 0) { + struct usb_device_id usb_dev_temp[] = { + { + USB_DEVICE(vendor, product), + .driver_info = + (kernel_ulong_t) &palm_os_4_probe + } + }; /* Find the last entry in id_table */ - for (i=0; ; i++) { - if (id_table[i].idVendor==0) { + for (i = 0;; i++) { + if (id_table[i].idVendor == 0) { id_table[i] = usb_dev_temp[0]; break; } } /* Find the last entry in id_table_combined */ - for (i=0; ; i++) { - if (id_table_combined[i].idVendor==0) { + for (i = 0;; i++) { + if (id_table_combined[i].idVendor == 0) { id_table_combined[i] = usb_dev_temp[0]; break; } } - info("Untested USB device specified at time of module insertion"); + info( + "Untested USB device specified at time of module insertion"); info("Warning: This is not guaranteed to work"); info("Using a newer kernel is preferred to this method"); info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x", @@ -968,7 +984,7 @@ static int __init visor_init (void) if (retval) goto failed_clie_5_register; retval = usb_register(&visor_driver); - if (retval) + if (retval) goto failed_usb_register; info(DRIVER_DESC); @@ -986,18 +1002,18 @@ failed_handspring_register: static void __exit visor_exit (void) { - usb_deregister (&visor_driver); - usb_serial_deregister (&handspring_device); - usb_serial_deregister (&clie_3_5_device); - usb_serial_deregister (&clie_5_device); + usb_deregister(&visor_driver); + usb_serial_deregister(&handspring_device); + usb_serial_deregister(&clie_3_5_device); + usb_serial_deregister(&clie_5_device); } module_init(visor_init); module_exit(visor_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 665aa77a917..3a9d14384a4 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -12,29 +12,31 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) * Upgrade to full working driver * * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. + * switched from using spinlock to a semaphore, which fixes lots of + * problems. * * (04/08/2001) gb * Identify version on module load. - * + * * 2001_Mar_19 gkh - * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more + * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more * than once, and the got the proper usb_device_id table entries so * the driver works again. * * (11/01/2000) Adam J. Richter * usb_device_id table support - * + * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. - * + * * (10/03/2000) smd * firmware is improved to guard against crap sent to device * firmware now replies CMD_FAILURE on bad things @@ -52,9 +54,9 @@ * Fixed bug with port->minor that was found by Al Borchers * * (07/04/2000) gkh - * Added support for port settings. Baud rate can now be changed. Line signals - * are not transferred to and from the tty layer yet, but things seem to be - * working well now. + * Added support for port settings. Baud rate can now be changed. Line + * signals are not transferred to and from the tty layer yet, but things + * seem to be working well now. * * (05/04/2000) gkh * First cut at open and close commands. Data can flow through the ports at @@ -62,7 +64,7 @@ * * (03/26/2000) gkh * Split driver up into device specific pieces. - * + * */ #include <linux/kernel.h> @@ -75,7 +77,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/termbits.h> #include <linux/usb.h> #include <linux/serial_reg.h> @@ -125,7 +127,7 @@ static struct usb_device_id id_table_combined [] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); static struct usb_driver whiteheat_driver = { .name = "whiteheat", @@ -136,26 +138,34 @@ static struct usb_driver whiteheat_driver = { }; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id); -static int whiteheat_firmware_attach (struct usb_serial *serial); +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id); +static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ -static int whiteheat_attach (struct usb_serial *serial); -static void whiteheat_shutdown (struct usb_serial *serial); -static int whiteheat_open (struct usb_serial_port *port, struct file *filp); -static void whiteheat_close (struct usb_serial_port *port, struct file *filp); -static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int whiteheat_write_room (struct usb_serial_port *port); -static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old); -static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file); -static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); -static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state); -static int whiteheat_chars_in_buffer (struct usb_serial_port *port); -static void whiteheat_throttle (struct usb_serial_port *port); -static void whiteheat_unthrottle (struct usb_serial_port *port); -static void whiteheat_read_callback (struct urb *urb); -static void whiteheat_write_callback (struct urb *urb); +static int whiteheat_attach(struct usb_serial *serial); +static void whiteheat_shutdown(struct usb_serial *serial); +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static void whiteheat_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +static int whiteheat_write(struct tty_struct *tty, + struct usb_serial_port *port, + const unsigned char *buf, int count); +static int whiteheat_write_room(struct tty_struct *tty); +static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file); +static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); +static int whiteheat_chars_in_buffer(struct tty_struct *tty); +static void whiteheat_throttle(struct tty_struct *tty); +static void whiteheat_unthrottle(struct tty_struct *tty); +static void whiteheat_read_callback(struct urb *urb); +static void whiteheat_write_callback(struct urb *urb); static struct usb_serial_driver whiteheat_fake_device = { .driver = { @@ -202,7 +212,9 @@ struct whiteheat_command_private { struct mutex mutex; __u8 port_running; __u8 command_finished; - wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ + wait_queue_head_t wait_command; /* for handling sleeping whilst + waiting for a command to + finish */ __u8 result_buffer[64]; }; @@ -239,14 +251,16 @@ static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); static int start_port_read(struct usb_serial_port *port); -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head); +static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, + struct list_head *head); static struct list_head *list_first(struct list_head *head); static void rx_data_softint(struct work_struct *work); -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); static int firm_close(struct usb_serial_port *port); -static int firm_setup_port(struct usb_serial_port *port); +static int firm_setup_port(struct tty_struct *tty); static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); static int firm_set_break(struct usb_serial_port *port, __u8 onoff); @@ -278,7 +292,8 @@ static int firm_report_tx_done(struct usb_serial_port *port); - device renumerated itself and comes up as new device id with all firmware download completed. */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id) +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id) { int response, ret = -ENOENT; const struct firmware *loader_fw = NULL, *firmware_fw = NULL; @@ -313,7 +328,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct record = ihex_next_binrec(record); } - response = ezusb_set_reset (serial, 0); + response = ezusb_set_reset(serial, 0); record = (const struct ihex_binrec *)firmware_fw->data; while (record && be32_to_cpu(record->addr) < 0x1b40) @@ -330,8 +345,8 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct } ++record; } - - response = ezusb_set_reset (serial, 1); + + response = ezusb_set_reset(serial, 1); record = (const struct ihex_binrec *)firmware_fw->data; while (record && be32_to_cpu(record->addr) < 0x1b40) { @@ -355,7 +370,7 @@ static int whiteheat_firmware_download (struct usb_serial *serial, const struct } -static int whiteheat_firmware_attach (struct usb_serial *serial) +static int whiteheat_firmware_attach(struct usb_serial *serial) { /* We want this device to fail to have a driver assigned to it */ return 1; @@ -365,7 +380,7 @@ static int whiteheat_firmware_attach (struct usb_serial *serial) /***************************************************************************** * Connect Tech's White Heat serial driver functions *****************************************************************************/ -static int whiteheat_attach (struct usb_serial *serial) +static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; @@ -386,43 +401,52 @@ static int whiteheat_attach (struct usb_serial *serial) command_port = serial->port[COMMAND_PORT]; - pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress); + pipe = usb_sndbulkpipe(serial->dev, + command_port->bulk_out_endpointAddress); command = kmalloc(2, GFP_KERNEL); if (!command) goto no_command_buffer; command[0] = WHITEHEAT_GET_HW_INFO; command[1] = 0; - + result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); if (!result) goto no_result_buffer; /* * When the module is reloaded the firmware is still there and * the endpoints are still in the usb core unchanged. This is the - * unlinking bug in disguise. Same for the call below. - */ + * unlinking bug in disguise. Same for the call below. + */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, command, 2, + &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->description, ret); + err("%s: Couldn't send command [%d]", + serial->type->description, ret); goto no_firmware; } else if (alen != 2) { - err("%s: Send command incomplete [%d]", serial->type->description, alen); + err("%s: Send command incomplete [%d]", + serial->type->description, alen); goto no_firmware; } - pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress); + pipe = usb_rcvbulkpipe(serial->dev, + command_port->bulk_in_endpointAddress); /* See the comment on the usb_clear_halt() above */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, result, + sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->description, ret); + err("%s: Couldn't get results [%d]", + serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(*hw_info) + 1) { - err("%s: Get results incomplete [%d]", serial->type->description, alen); + err("%s: Get results incomplete [%d]", + serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->description, result[0]); + err("%s: Command failed [%d]", + serial->type->description, result[0]); goto no_firmware; } @@ -436,7 +460,8 @@ static int whiteheat_attach (struct usb_serial *serial) info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); + err("%s: Out of memory for port structures\n", + serial->type->description); goto no_private; } @@ -506,9 +531,11 @@ static int whiteheat_attach (struct usb_serial *serial) usb_set_serial_port_data(port, info); } - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); + command_info = kmalloc(sizeof(struct whiteheat_command_private), + GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); + err("%s: Out of memory for port structures\n", + serial->type->description); goto no_command_private; } @@ -525,9 +552,12 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); - err("%s: please contact support@connecttech.com\n", serial->type->description); + err("%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + err("%s: please contact support@connecttech.com\n", + serial->type->description); kfree(result); return -ENODEV; @@ -570,7 +600,7 @@ no_command_buffer: } -static void whiteheat_shutdown (struct usb_serial *serial) +static void whiteheat_shutdown(struct usb_serial *serial) { struct usb_serial_port *command_port; struct usb_serial_port *port; @@ -585,7 +615,7 @@ static void whiteheat_shutdown (struct usb_serial *serial) /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; - kfree (usb_get_serial_port_data(command_port)); + kfree(usb_get_serial_port_data(command_port)); for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; @@ -612,11 +642,10 @@ static void whiteheat_shutdown (struct usb_serial *serial) return; } - -static int whiteheat_open (struct usb_serial_port *port, struct file *filp) +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { int retval = 0; - struct ktermios old_term; dbg("%s - port %d", __func__, port->number); @@ -624,7 +653,8 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) if (retval) goto exit; - port->tty->low_latency = 1; + if (tty) + tty->low_latency = 1; /* send an open port command */ retval = firm_open(port); @@ -640,9 +670,8 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) goto exit; } - old_term.c_cflag = ~port->tty->termios->c_cflag; - old_term.c_iflag = ~port->tty->termios->c_iflag; - whiteheat_set_termios(port, &old_term); + if (tty) + firm_setup_port(tty); /* Work around HCD bugs */ usb_clear_halt(port->serial->dev, port->read_urb->pipe); @@ -651,7 +680,8 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) /* Start reading from the device */ retval = start_port_read(port); if (retval) { - err("%s - failed submitting read urb, error %d", __func__, retval); + err("%s - failed submitting read urb, error %d", + __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; @@ -663,7 +693,8 @@ exit: } -static void whiteheat_close(struct usb_serial_port *port, struct file * filp) +static void whiteheat_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct whiteheat_private *info = usb_get_serial_port_data(port); struct whiteheat_urb_wrap *wrap; @@ -681,7 +712,7 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) } mutex_unlock(&port->serial->disc_mutex); - port->tty->closing = 1; + tty->closing = 1; /* * Not currently in use; tty_wait_until_sent() calls @@ -689,12 +720,12 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) * acquisition. This should be fixed at some point. Greg's been * notified. if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { - tty_wait_until_sent(port->tty, CLOSING_DELAY); + tty_wait_until_sent(tty, CLOSING_DELAY); } */ - tty_driver_flush_buffer(port->tty); - tty_ldisc_flush(port->tty); + tty_driver_flush_buffer(tty); + tty_ldisc_flush(tty); firm_report_tx_done(port); @@ -728,11 +759,12 @@ static void whiteheat_close(struct usb_serial_port *port, struct file * filp) stop_command_port(port->serial); - port->tty->closing = 0; + tty->closing = 0; } -static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count) +static int whiteheat_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct whiteheat_private *info = usb_get_serial_port_data(port); @@ -763,16 +795,19 @@ static int whiteheat_write(struct usb_serial_port *port, const unsigned char *bu wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); urb = wrap->urb; - bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; - memcpy (urb->transfer_buffer, buf + sent, bytes); + bytes = (count > port->bulk_out_size) ? + port->bulk_out_size : count; + memcpy(urb->transfer_buffer, buf + sent, bytes); - usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer); + usb_serial_debug_data(debug, &port->dev, + __func__, bytes, urb->transfer_buffer); urb->dev = serial->dev; urb->transfer_buffer_length = bytes; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed submitting write urb, error %d", __func__, result); + err("%s - failed submitting write urb, error %d", + __func__, result); sent = result; spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->tx_urbs_free); @@ -790,16 +825,16 @@ static int whiteheat_write(struct usb_serial_port *port, const unsigned char *bu return sent; } - -static int whiteheat_write_room(struct usb_serial_port *port) +static int whiteheat_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); struct list_head *tmp; int room = 0; unsigned long flags; dbg("%s - port %d", __func__, port->number); - + spin_lock_irqsave(&info->lock, flags); list_for_each(tmp, &info->tx_urbs_free) room++; @@ -810,9 +845,9 @@ static int whiteheat_write_room(struct usb_serial_port *port) return (room); } - -static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) +static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; @@ -827,10 +862,10 @@ static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) return modem_signals; } - -static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); dbg("%s - port %d", __func__, port->number); @@ -851,65 +886,55 @@ static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, } -static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +static int whiteheat_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); switch (cmd) { - case TIOCGSERIAL: - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; - serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = port->bulk_out_size; - serstruct.custom_divisor = 0; - serstruct.baud_base = 460800; - serstruct.close_delay = CLOSING_DELAY; - serstruct.closing_wait = CLOSING_DELAY; - - if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) - return -EFAULT; - - break; - - case TIOCSSERIAL: - if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) - return -EFAULT; - - /* - * For now this is ignored. dip sets the ASYNC_[V]HI flags - * but this isn't used by us at all. Maybe someone somewhere - * will need the custom_divisor setting. - */ - - break; - - default: - break; + case TIOCGSERIAL: + memset(&serstruct, 0, sizeof(serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->serial->minor; + serstruct.port = port->number; + serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + serstruct.xmit_fifo_size = port->bulk_out_size; + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + serstruct.close_delay = CLOSING_DELAY; + serstruct.closing_wait = CLOSING_DELAY; + + if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) + return -EFAULT; + break; + default: + break; } return -ENOIOCTLCMD; } -static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - dbg("%s -port %d", __func__, port->number); - firm_setup_port(port); + firm_setup_port(tty); } - -static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) { +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; firm_set_break(port, break_state); } -static int whiteheat_chars_in_buffer(struct usb_serial_port *port) +static int whiteheat_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); struct list_head *tmp; struct whiteheat_urb_wrap *wrap; @@ -925,13 +950,14 @@ static int whiteheat_chars_in_buffer(struct usb_serial_port *port) } spin_unlock_irqrestore(&info->lock, flags); - dbg ("%s - returns %d", __func__, chars); + dbg("%s - returns %d", __func__, chars); return chars; } -static void whiteheat_throttle (struct usb_serial_port *port) +static void whiteheat_throttle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned long flags; @@ -945,8 +971,9 @@ static void whiteheat_throttle (struct usb_serial_port *port) } -static void whiteheat_unthrottle (struct usb_serial_port *port) +static void whiteheat_unthrottle(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); int actually_throttled; unsigned long flags; @@ -993,7 +1020,7 @@ static void command_port_read_callback(struct urb *urb) command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg ("%s - command_info is NULL, exiting.", __func__); + dbg("%s - command_info is NULL, exiting.", __func__); return; } if (status) { @@ -1004,7 +1031,8 @@ static void command_port_read_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &command_port->dev, + __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -1013,21 +1041,23 @@ static void command_port_read_callback(struct urb *urb) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { - /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ + /* These are unsolicited reports from the firmware, hence no + waiting command to wakeup */ dbg("%s - event received", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { - memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); + memcpy(command_info->result_buffer, &data[1], + urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); - } else { + } else dbg("%s - bad reply from firmware", __func__); - } - + /* Continue trying to always read */ command_port->read_urb->dev = command_port->serial->dev; result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", __func__, result); + dbg("%s - failed resubmitting read urb, error %d", + __func__, result); } @@ -1060,7 +1090,8 @@ static void whiteheat_read_callback(struct urb *urb) return; } - usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); + usb_serial_debug_data(debug, &port->dev, + __func__, urb->actual_length, data); spin_lock(&info->lock); list_add_tail(&wrap->list, &info->rx_urb_q); @@ -1107,7 +1138,8 @@ static void whiteheat_write_callback(struct urb *urb) /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; @@ -1122,13 +1154,13 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); command_info->command_finished = false; - + transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; transfer_buffer[0] = command; - memcpy (&transfer_buffer[1], data, datasize); + memcpy(&transfer_buffer[1], data, datasize); command_port->write_urb->transfer_buffer_length = datasize + 1; command_port->write_urb->dev = port->serial->dev; - retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); + retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { dbg("%s - submit urb failed", __func__); goto exit; @@ -1155,51 +1187,57 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { dbg("%s - command completed.", __func__); switch (command) { - case WHITEHEAT_GET_DTR_RTS: - info = usb_get_serial_port_data(port); - memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info)); + case WHITEHEAT_GET_DTR_RTS: + info = usb_get_serial_port_data(port); + memcpy(&info->mcr, command_info->result_buffer, + sizeof(struct whiteheat_dr_info)); break; } } - exit: mutex_unlock(&command_info->mutex); return retval; } -static int firm_open(struct usb_serial_port *port) { +static int firm_open(struct usb_serial_port *port) +{ struct whiteheat_simple open_command; open_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); + return firm_send_command(port, WHITEHEAT_OPEN, + (__u8 *)&open_command, sizeof(open_command)); } -static int firm_close(struct usb_serial_port *port) { +static int firm_close(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); + return firm_send_command(port, WHITEHEAT_CLOSE, + (__u8 *)&close_command, sizeof(close_command)); } -static int firm_setup_port(struct usb_serial_port *port) { +static int firm_setup_port(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; struct whiteheat_port_settings port_settings; - unsigned int cflag = port->tty->termios->c_cflag; + unsigned int cflag = tty->termios->c_cflag; port_settings.port = port->number + 1; /* get the byte size */ switch (cflag & CSIZE) { - case CS5: port_settings.bits = 5; break; - case CS6: port_settings.bits = 6; break; - case CS7: port_settings.bits = 7; break; - default: - case CS8: port_settings.bits = 8; break; + case CS5: port_settings.bits = 5; break; + case CS6: port_settings.bits = 6; break; + case CS7: port_settings.bits = 7; break; + default: + case CS8: port_settings.bits = 8; break; } dbg("%s - data bits = %d", __func__, port_settings.bits); - + /* determine the parity */ if (cflag & PARENB) if (cflag & CMSPAR) @@ -1225,7 +1263,8 @@ static int firm_setup_port(struct usb_serial_port *port) { /* figure out the flow control settings */ if (cflag & CRTSCTS) - port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); + port_settings.hflow = (WHITEHEAT_HFLOW_CTS | + WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; dbg("%s - hardware flow control = %s %s %s %s", __func__, @@ -1233,81 +1272,95 @@ static int firm_setup_port(struct usb_serial_port *port) { (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); - + /* determine software flow control */ - if (I_IXOFF(port->tty)) + if (I_IXOFF(tty)) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; dbg("%s - software flow control = %c", __func__, port_settings.sflow); - - port_settings.xon = START_CHAR(port->tty); - port_settings.xoff = STOP_CHAR(port->tty); - dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff); + + port_settings.xon = START_CHAR(tty); + port_settings.xoff = STOP_CHAR(tty); + dbg("%s - XON = %2x, XOFF = %2x", + __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ - port_settings.baud = tty_get_baud_rate(port->tty); + port_settings.baud = tty_get_baud_rate(tty); dbg("%s - baud rate = %d", __func__, port_settings.baud); /* fixme: should set validated settings */ - tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud); + tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; - + /* now send the message to the device */ - return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); + return firm_send_command(port, WHITEHEAT_SETUP_PORT, + (__u8 *)&port_settings, sizeof(port_settings)); } -static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb rts_command; rts_command.port = port->number - port->serial->minor + 1; rts_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&rts_command, sizeof(rts_command)); } -static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb dtr_command; dtr_command.port = port->number - port->serial->minor + 1; dtr_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command)); + return firm_send_command(port, WHITEHEAT_SET_DTR, + (__u8 *)&dtr_command, sizeof(dtr_command)); } -static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_break(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb break_command; break_command.port = port->number - port->serial->minor + 1; break_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command)); + return firm_send_command(port, WHITEHEAT_SET_BREAK, + (__u8 *)&break_command, sizeof(break_command)); } -static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { +static int firm_purge(struct usb_serial_port *port, __u8 rxtx) +{ struct whiteheat_purge purge_command; purge_command.port = port->number - port->serial->minor + 1; purge_command.what = rxtx; - return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); + return firm_send_command(port, WHITEHEAT_PURGE, + (__u8 *)&purge_command, sizeof(purge_command)); } -static int firm_get_dtr_rts(struct usb_serial_port *port) { +static int firm_get_dtr_rts(struct usb_serial_port *port) +{ struct whiteheat_simple get_dr_command; get_dr_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); + return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, + (__u8 *)&get_dr_command, sizeof(get_dr_command)); } -static int firm_report_tx_done(struct usb_serial_port *port) { +static int firm_report_tx_done(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); + return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, + (__u8 *)&close_command, sizeof(close_command)); } @@ -1319,7 +1372,7 @@ static int start_command_port(struct usb_serial *serial) struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; int retval = 0; - + command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); @@ -1330,7 +1383,8 @@ static int start_command_port(struct usb_serial *serial) command_port->read_urb->dev = serial->dev; retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { - err("%s - failed submitting read urb, error %d", __func__, retval); + err("%s - failed submitting read urb, error %d", + __func__, retval); goto exit; } } @@ -1400,7 +1454,8 @@ static int start_port_read(struct usb_serial_port *port) } -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head) +static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, + struct list_head *head) { struct whiteheat_urb_wrap *wrap; struct list_head *tmp; @@ -1426,7 +1481,7 @@ static void rx_data_softint(struct work_struct *work) struct whiteheat_private *info = container_of(work, struct whiteheat_private, rx_work); struct usb_serial_port *port = info->port; - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; struct whiteheat_urb_wrap *wrap; struct urb *urb; unsigned long flags; @@ -1449,7 +1504,8 @@ static void rx_data_softint(struct work_struct *work) urb = wrap->urb; if (tty && urb->actual_length) { - int len = tty_buffer_request_room(tty, urb->actual_length); + int len = tty_buffer_request_room(tty, + urb->actual_length); /* This stuff can go away now I suspect */ if (unlikely(len < urb->actual_length)) { spin_lock_irqsave(&info->lock, flags); @@ -1466,7 +1522,8 @@ static void rx_data_softint(struct work_struct *work) urb->dev = port->serial->dev; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - err("%s - failed resubmitting read urb, error %d", __func__, result); + err("%s - failed resubmitting read urb, error %d", + __func__, result); spin_lock_irqsave(&info->lock, flags); list_add(tmp, &info->rx_urbs_free); continue; @@ -1485,7 +1542,7 @@ static void rx_data_softint(struct work_struct *work) /***************************************************************************** * Connect Tech's White Heat module functions *****************************************************************************/ -static int __init whiteheat_init (void) +static int __init whiteheat_init(void) { int retval; retval = usb_serial_register(&whiteheat_fake_device); @@ -1508,19 +1565,19 @@ failed_fake_register: } -static void __exit whiteheat_exit (void) +static void __exit whiteheat_exit(void) { - usb_deregister (&whiteheat_driver); - usb_serial_deregister (&whiteheat_fake_device); - usb_serial_deregister (&whiteheat_device); + usb_deregister(&whiteheat_driver); + usb_serial_deregister(&whiteheat_fake_device); + usb_serial_deregister(&whiteheat_device); } module_init(whiteheat_init); module_exit(whiteheat_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h index f1607970566..38065df4d2d 100644 --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -2,7 +2,7 @@ * USB ConnectTech WhiteHEAT driver * * Copyright (C) 2002 - * Connect Tech Inc. + * Connect Tech Inc. * * Copyright (C) 1999, 2000 * Greg Kroah-Hartman (greg@kroah.com) @@ -12,7 +12,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver + * See Documentation/usb/usb-serial.txt for more information on using this + * driver * */ @@ -30,13 +31,16 @@ #define WHITEHEAT_DUMP 7 /* dump memory */ #define WHITEHEAT_STATUS 8 /* get status */ #define WHITEHEAT_PURGE 9 /* clear the UART fifos */ -#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS for a port */ -#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and hardware ID */ +#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS + for a port */ +#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and + hardware ID */ #define WHITEHEAT_REPORT_TX_DONE 12 /* get the next TX done */ #define WHITEHEAT_EVENT 13 /* unsolicited status events */ -#define WHITEHEAT_ECHO 14 /* send data to the indicated IN endpoint */ -#define WHITEHEAT_DO_TEST 15 /* perform the specified test */ -#define WHITEHEAT_CMD_COMPLETE 16 /* reply for certain commands */ +#define WHITEHEAT_ECHO 14 /* send data to the indicated + IN endpoint */ +#define WHITEHEAT_DO_TEST 15 /* perform specified test */ +#define WHITEHEAT_CMD_COMPLETE 16 /* reply for some commands */ #define WHITEHEAT_CMD_FAILURE 17 /* reply for failed commands */ @@ -67,20 +71,28 @@ struct whiteheat_simple { #define WHITEHEAT_PAR_MARK '1' /* mark (force 1) parity */ #define WHITEHEAT_SFLOW_NONE 'n' /* no software flow control */ -#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX fills/empties */ -#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will stop/start TX */ +#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX + fills/empties */ +#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will + stop/start TX */ #define WHITEHEAT_SFLOW_RXTX 'b' /* both SFLOW_RX and SFLOW_TX */ #define WHITEHEAT_HFLOW_NONE 0x00 /* no hardware flow control */ -#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, off otherwise */ -#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX fills/empties */ -#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on will stop/start TX */ -#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on will stop/start TX */ -#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX fills/empties */ +#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, + off otherwise */ +#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX + fills/empties */ +#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX + fills/empties */ struct whiteheat_port_settings { __u8 port; /* port number (1 to N) */ - __u32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */ + __u32 baud; /* any value 7 - 460800, firmware calculates + best fit; arrives little endian */ __u8 bits; /* 5, 6, 7, or 8 */ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */ __u8 parity; /* see WHITEHEAT_PAR_* above */ @@ -167,12 +179,14 @@ struct whiteheat_echo { */ #define WHITEHEAT_TEST_UART_RW 0x01 /* read/write uart registers */ #define WHITEHEAT_TEST_UART_INTR 0x02 /* uart interrupt */ -#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for PORT_CONT/PORT_DISCONT */ +#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for + PORT_CONT/PORT_DISCONT */ #define WHITEHEAT_TEST_PORT_CONT 0x04 /* port connect */ #define WHITEHEAT_TEST_PORT_DISCONT 0x05 /* port disconnect */ #define WHITEHEAT_TEST_UART_CLK_START 0x06 /* uart clock test start */ #define WHITEHEAT_TEST_UART_CLK_STOP 0x07 /* uart clock test stop */ -#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a loopback cable/connector */ +#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a + loopback cable/connector */ #define WHITEHEAT_TEST_ERASE_EEPROM 0x09 /* erase eeprom */ #define WHITEHEAT_TEST_READ_EEPROM 0x0a /* read eeprom */ #define WHITEHEAT_TEST_PROGRAM_EEPROM 0x0b /* program eeprom */ @@ -198,19 +212,27 @@ struct whiteheat_test { #define WHITEHEAT_EVENT_CONNECT 0x08 /* connect field is valid */ #define WHITEHEAT_FLOW_NONE 0x00 /* no flow control active */ -#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS (waiting for CTS to go on) */ -#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped by RTS */ -#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF received (waiting for XON) */ -#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF transmitted */ +#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS + (waiting for CTS to go on) */ +#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped + by RTS */ +#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF + received (waiting for XON) */ +#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF + transmitted */ #define WHITEHEAT_FLOW_TX_DONE 0x80 /* TX has completed */ struct whiteheat_status_info { __u8 port; /* port number (1 to N) */ - __u8 event; /* indicates what the current event is, see WHITEHEAT_EVENT_* above */ - __u8 modem; /* modem signal status (copy of uart's MSR register) */ + __u8 event; /* indicates what the current event is, + see WHITEHEAT_EVENT_* above */ + __u8 modem; /* modem signal status (copy of uart's + MSR register) */ __u8 error; /* line status (copy of uart's LSR register) */ - __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* above */ - __u8 connect; /* 0 means not connected, non-zero means connected */ + __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* + above */ + __u8 connect; /* 0 means not connected, non-zero means + connected */ }; @@ -256,7 +278,8 @@ struct whiteheat_hw_info { struct whiteheat_event_info { __u8 port; /* port number (1 to N) */ __u8 event; /* see whiteheat_status_info.event */ - __u8 info; /* see whiteheat_status_info.modem, .error, .flow, .connect */ + __u8 info; /* see whiteheat_status_info.modem, .error, + .flow, .connect */ }; @@ -269,7 +292,8 @@ struct whiteheat_event_info { struct whiteheat_test_info { __u8 port; /* port number (1 to N) */ - __u8 test; /* indicates which test this is a response for, see WHITEHEAT_DO_TEST above */ + __u8 test; /* indicates which test this is a response for, + see WHITEHEAT_DO_TEST above */ __u8 status; /* see WHITEHEAT_TEST_* above */ __u8 results[32]; /* test-dependent results */ }; |