aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/Kconfig12
-rw-r--r--drivers/usb/storage/Makefile1
-rw-r--r--drivers/usb/storage/onetouch.c210
-rw-r--r--drivers/usb/storage/onetouch.h9
-rw-r--r--drivers/usb/storage/scsiglue.c8
-rw-r--r--drivers/usb/storage/shuttle_usbat.c97
-rw-r--r--drivers/usb/storage/transport.c17
-rw-r--r--drivers/usb/storage/unusual_devs.h19
-rw-r--r--drivers/usb/storage/usb.c79
-rw-r--r--drivers/usb/storage/usb.h1
10 files changed, 348 insertions, 105 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index f1f1c0608c2..bb9819cc882 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -111,3 +111,15 @@ config USB_STORAGE_JUMPSHOT
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
+
+config USB_STORAGE_ONETOUCH
+ bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
+ depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL
+ help
+ Say Y here to include additional code to support the Maxtor OneTouch
+ USB hard drive's onetouch button.
+
+ This code registers the button on the front of Maxtor OneTouch USB
+ hard drive's as an input device. An action can be associated with
+ this input in any keybinding software. (e.g. gnome's keyboard short-
+ cuts)
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 56652ccc288..44ab8f9978f 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -18,6 +18,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
new file mode 100644
index 00000000000..2c9402dc702
--- /dev/null
+++ b/drivers/usb/storage/onetouch.c
@@ -0,0 +1,210 @@
+/*
+ * Support for the Maxtor OneTouch USB hard drive's button
+ *
+ * Current development and maintenance by:
+ * Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
+ *
+ * Initial work by:
+ * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ *
+ * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_input.h>
+#include "usb.h"
+#include "onetouch.h"
+#include "debug.h"
+
+void onetouch_release_input(void *onetouch_);
+
+struct usb_onetouch {
+ char name[128];
+ char phys[64];
+ struct input_dev dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
+
+ struct urb *irq; /* urb for interrupt in report */
+ unsigned char *data; /* input data */
+ dma_addr_t data_dma;
+};
+
+static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_onetouch *onetouch = urb->context;
+ signed char *data = onetouch->data;
+ struct input_dev *dev = &onetouch->dev;
+ int status;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ input_regs(dev, regs);
+
+ input_report_key(&onetouch->dev, ONETOUCH_BUTTON,
+ data[0] & 0x02);
+
+ input_sync(dev);
+resubmit:
+ status = usb_submit_urb (urb, SLAB_ATOMIC);
+ if (status)
+ err ("can't resubmit intr, %s-%s/input0, status %d",
+ onetouch->udev->bus->bus_name,
+ onetouch->udev->devpath, status);
+}
+
+static int usb_onetouch_open(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ onetouch->irq->dev = onetouch->udev;
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
+ err("usb_submit_urb failed");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void usb_onetouch_close(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ usb_kill_urb(onetouch->irq);
+}
+
+int onetouch_connect_input(struct us_data *ss)
+{
+ struct usb_device *udev = ss->pusb_dev;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_onetouch *onetouch;
+ int pipe, maxp;
+ char path[64];
+
+ interface = ss->pusb_intf->cur_altsetting;
+
+ if (interface->desc.bNumEndpoints != 3)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[2].desc;
+ if(!(endpoint->bEndpointAddress & USB_DIR_IN))
+ return -ENODEV;
+ if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_INT)
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+ if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL)))
+ return -ENOMEM;
+
+ onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
+ SLAB_ATOMIC, &onetouch->data_dma);
+ if (!onetouch->data){
+ kfree(onetouch);
+ return -ENOMEM;
+ }
+
+ onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!onetouch->irq){
+ kfree(onetouch);
+ usb_buffer_free(udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ return -ENODEV;
+ }
+
+
+ onetouch->udev = udev;
+
+ set_bit(EV_KEY, onetouch->dev.evbit);
+ set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit);
+ clear_bit(0, onetouch->dev.keybit);
+
+ onetouch->dev.private = onetouch;
+ onetouch->dev.open = usb_onetouch_open;
+ onetouch->dev.close = usb_onetouch_close;
+
+ usb_make_path(udev, path, sizeof(path));
+ sprintf(onetouch->phys, "%s/input0", path);
+
+ onetouch->dev.name = onetouch->name;
+ onetouch->dev.phys = onetouch->phys;
+
+ usb_to_input_id(udev, &onetouch->dev.id);
+
+ onetouch->dev.dev = &udev->dev;
+
+ if (udev->manufacturer)
+ strcat(onetouch->name, udev->manufacturer);
+ if (udev->product)
+ sprintf(onetouch->name, "%s %s", onetouch->name,
+ udev->product);
+ if (!strlen(onetouch->name))
+ sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x",
+ onetouch->dev.id.vendor, onetouch->dev.id.product);
+
+ usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
+ (maxp > 8 ? 8 : maxp),
+ usb_onetouch_irq, onetouch, endpoint->bInterval);
+ onetouch->irq->transfer_dma = onetouch->data_dma;
+ onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ ss->extra_destructor = onetouch_release_input;
+ ss->extra = onetouch;
+
+ input_register_device(&onetouch->dev);
+ printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path);
+
+ return 0;
+}
+
+void onetouch_release_input(void *onetouch_)
+{
+ struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
+
+ if (onetouch) {
+ usb_kill_urb(onetouch->irq);
+ input_unregister_device(&onetouch->dev);
+ usb_free_urb(onetouch->irq);
+ usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ printk(KERN_INFO "usb-input: deregistering %s\n",
+ onetouch->dev.name);
+ }
+}
diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h
new file mode 100644
index 00000000000..41c7aa8f044
--- /dev/null
+++ b/drivers/usb/storage/onetouch.h
@@ -0,0 +1,9 @@
+#ifndef _ONETOUCH_H_
+#define _ONETOUCH_H_
+
+#define ONETOUCH_PKT_LEN 0x02
+#define ONETOUCH_BUTTON KEY_PROG1
+
+int onetouch_connect_input(struct us_data *ss);
+
+#endif
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index af294bb68c3..d34dc9f417f 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -156,6 +156,14 @@ static int slave_configure(struct scsi_device *sdev)
if (us->flags & US_FL_FIX_CAPACITY)
sdev->fix_capacity = 1;
+ /* Some devices report a SCSI revision level above 2 but are
+ * unable to handle the REPORT LUNS command (for which
+ * support is mandatory at level 3). Since we already have
+ * a Get-Max-LUN request, we won't lose much by setting the
+ * revision level down to 2. The only devices that would be
+ * affected are those with sparse LUNs. */
+ sdev->scsi_level = SCSI_2;
+
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
* recoverable or not. Setting this flag tells the SCSI
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index f3b60288696..356342c6e7a 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -839,34 +839,31 @@ static int usbat_identify_device(struct us_data *us,
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
+ msleep(25);
/*
- * By examining the device signature after a reset, we can identify
- * whether the device supports the ATAPI packet interface.
- * The flash-devices do not support this, whereas the HP CDRW's obviously
- * do.
- *
- * This method is not ideal, but works because no other devices have been
- * produced based on the USBAT/USBAT02.
- *
- * Section 9.1 of the ATAPI-4 spec states (amongst other things) that
- * after a device reset, a Cylinder low of 0x14 indicates that the device
- * does support packet commands.
+ * In attempt to distinguish between HP CDRW's and Flash readers, we now
+ * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+ * readers), this command should fail with error. On ATAPI devices (i.e.
+ * CDROM drives), it should succeed.
*/
- rc = usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, &status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
+ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("usbat_identify_device: Cylinder low is %02X\n", status);
+ rc = usbat_get_status(us, &status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- if (status == 0x14) {
+ // Check for error bit
+ if (status & 0x01) {
+ // Device is a CompactFlash reader/writer
+ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
+ } else {
// Device is HP 8200
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
- } else {
- // Device is a CompactFlash reader/writer
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -1239,16 +1236,10 @@ static int usbat_select_and_test_registers(struct us_data *us)
{
int selector;
unsigned char *status = us->iobuf;
- unsigned char max_selector = 0xB0;
- if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
- max_selector = 0xA0;
// try device = master, then device = slave.
-
- for (selector = 0xA0; selector <= max_selector; selector += 0x10) {
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200 &&
- usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1334,60 +1325,30 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 3\n");
- // At this point, we need to detect which device we are using
- if (usbat_set_transport(us, info))
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 4\n");
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200) {
- msleep(250);
-
- // Write 0x80 to ISA port 0x3F
- rc = usbat_write(us, USBAT_ISA, 0x3F, 0x80);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 5\n");
-
- // Read ISA port 0x27
- rc = usbat_read(us, USBAT_ISA, 0x27, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 6\n");
-
- rc = usbat_read_user_io(us, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 7\n");
- }
-
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 8\n");
+ US_DEBUGP("INIT 4\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 9\n");
+ US_DEBUGP("INIT 5\n");
// Enable peripheral control signals and card detect
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 10\n");
+ US_DEBUGP("INIT 6\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 11\n");
+ US_DEBUGP("INIT 7\n");
msleep(1400);
@@ -1395,13 +1356,19 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 12\n");
+ US_DEBUGP("INIT 8\n");
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 13\n");
+ US_DEBUGP("INIT 9\n");
+
+ // At this point, we need to detect which device we are using
+ if (usbat_set_transport(us, info))
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUGP("INIT 10\n");
if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
subcountH = 0x02;
@@ -1412,7 +1379,7 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 14\n");
+ US_DEBUGP("INIT 11\n");
return USB_STOR_TRANSPORT_GOOD;
}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index e6b1c6cf07f..c1ba5301ebf 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -96,8 +96,8 @@
* or before the URB_ACTIVE bit was set. If so, it's essential to cancel
* the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit
* is still set). Either way, the function must then wait for the URB to
- * finish. Note that because the URB_ASYNC_UNLINK flag is set, the URB can
- * still be in progress even after a call to usb_unlink_urb() returns.
+ * finish. Note that the URB can still be in progress even after a call to
+ * usb_unlink_urb() returns.
*
* The idea is that (1) once the ABORTING or DISCONNECTING bit is set,
* either the stop_transport() function or the submitting function
@@ -158,8 +158,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
* hasn't been mapped for DMA. Yes, this is clunky, but it's
* easier than always having the caller tell us whether the
* transfer buffer has already been mapped. */
- us->current_urb->transfer_flags =
- URB_ASYNC_UNLINK | URB_NO_SETUP_DMA_MAP;
+ us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
if (us->current_urb->transfer_buffer == us->iobuf)
us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
us->current_urb->transfer_dma = us->iobuf_dma;
@@ -611,7 +610,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
unsigned char old_sc_data_direction;
unsigned char old_cmd_len;
unsigned char old_cmnd[MAX_COMMAND_SIZE];
- unsigned long old_serial_number;
int old_resid;
US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
@@ -648,10 +646,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
old_sg = srb->use_sg;
srb->use_sg = 0;
- /* change the serial number -- toggle the high bit*/
- old_serial_number = srb->serial_number;
- srb->serial_number ^= 0x80000000;
-
/* issue the auto-sense command */
old_resid = srb->resid;
srb->resid = 0;
@@ -662,7 +656,6 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
srb->request_buffer = old_request_buffer;
srb->request_bufflen = old_request_bufflen;
srb->use_sg = old_sg;
- srb->serial_number = old_serial_number;
srb->sc_data_direction = old_sc_data_direction;
srb->cmd_len = old_cmd_len;
memcpy(srb->cmnd, old_cmnd, MAX_COMMAND_SIZE);
@@ -985,7 +978,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->DataTransferLength = cpu_to_le32(transfer_length);
bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0;
- bcb->Tag = srb->serial_number;
+ bcb->Tag = ++us->tag;
bcb->Lun = srb->device->lun;
if (us->flags & US_FL_SCM_MULT_TARG)
bcb->Lun |= srb->device->id << 4;
@@ -1074,7 +1067,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
residue, bcs->Status);
- if (bcs->Tag != srb->serial_number || bcs->Status > US_BULK_STAT_PHASE) {
+ if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
US_DEBUGP("Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index bd0ab3039bd..ad0cfd7a782 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -79,6 +79,13 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
#endif
+/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
+UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003,
+ "VIA Technologies Inc.",
+ "USB 2.0 Card Reader",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
* Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
* always fails and confuses drive.
@@ -929,6 +936,18 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
US_FL_SINGLE_LUN ),
#endif
+/* Submitted by: Nick Sillik <n.sillik@temple.edu>
+ * Needed for OneTouch extension to usb-storage
+ *
+ */
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+ UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
+ "Maxtor",
+ "OneTouch External Harddrive",
+ US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+ 0),
+#endif
+
/* Submitted by Joris Struyve <joris@struyve.be> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
"Medion",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 77e7fc258aa..cb4c770baf3 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -90,7 +90,9 @@
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
-
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+#include "onetouch.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -786,6 +788,7 @@ static void usb_stor_release_resources(struct us_data *us)
* any more commands.
*/
US_DEBUGP("-- sending exit command to thread\n");
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
up(&us->sema);
/* Call the destructor routine, if it exists */
@@ -816,6 +819,49 @@ static void dissociate_dev(struct us_data *us)
usb_set_intfdata(us->pusb_intf, NULL);
}
+/* First stage of disconnect processing: stop all commands and remove
+ * the host */
+static void quiesce_and_remove_host(struct us_data *us)
+{
+ /* Prevent new USB transfers, stop the current command, and
+ * interrupt a SCSI-scan or device-reset delay */
+ set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+ usb_stor_stop_transport(us);
+ wake_up(&us->delay_wait);
+
+ /* It doesn't matter if the SCSI-scanning thread is still running.
+ * The thread will exit when it sees the DISCONNECTING flag. */
+
+ /* Wait for the current command to finish, then remove the host */
+ down(&us->dev_semaphore);
+ up(&us->dev_semaphore);
+
+ /* queuecommand won't accept any new commands and the control
+ * thread won't execute a previously-queued command. If there
+ * is such a command pending, complete it with an error. */
+ if (us->srb) {
+ us->srb->result = DID_NO_CONNECT << 16;
+ scsi_lock(us_to_host(us));
+ us->srb->scsi_done(us->srb);
+ us->srb = NULL;
+ scsi_unlock(us_to_host(us));
+ }
+
+ /* Now we own no commands so it's safe to remove the SCSI host */
+ scsi_remove_host(us_to_host(us));
+}
+
+/* Second stage of disconnect processing: deallocate all resources */
+static void release_everything(struct us_data *us)
+{
+ usb_stor_release_resources(us);
+ dissociate_dev(us);
+
+ /* Drop our reference to the host; the SCSI core will free it
+ * (and "us" along with it) when the refcount becomes 0. */
+ scsi_host_put(us_to_host(us));
+}
+
/* Thread to carry out delayed SCSI-device scanning */
static int usb_stor_scan_thread(void * __us)
{
@@ -956,7 +1002,7 @@ static int storage_probe(struct usb_interface *intf,
if (result < 0) {
printk(KERN_WARNING USB_STORAGE
"Unable to start the device-scanning thread\n");
- scsi_remove_host(host);
+ quiesce_and_remove_host(us);
goto BadDevice;
}
atomic_inc(&total_threads);
@@ -969,10 +1015,7 @@ static int storage_probe(struct usb_interface *intf,
/* We come here if there are any problems */
BadDevice:
US_DEBUGP("storage_probe() failed\n");
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_release_resources(us);
- dissociate_dev(us);
- scsi_host_put(host);
+ release_everything(us);
return result;
}
@@ -982,28 +1025,8 @@ static void storage_disconnect(struct usb_interface *intf)
struct us_data *us = usb_get_intfdata(intf);
US_DEBUGP("storage_disconnect() called\n");
-
- /* Prevent new USB transfers, stop the current command, and
- * interrupt a SCSI-scan or device-reset delay */
- set_bit(US_FLIDX_DISCONNECTING, &us->flags);
- usb_stor_stop_transport(us);
- wake_up(&us->delay_wait);
-
- /* It doesn't matter if the SCSI-scanning thread is still running.
- * The thread will exit when it sees the DISCONNECTING flag. */
-
- /* Wait for the current command to finish, then remove the host */
- down(&us->dev_semaphore);
- up(&us->dev_semaphore);
- scsi_remove_host(us_to_host(us));
-
- /* Wait for everything to become idle and release all our resources */
- usb_stor_release_resources(us);
- dissociate_dev(us);
-
- /* Drop our reference to the host; the SCSI core will free it
- * (and "us" along with it) when the refcount becomes 0. */
- scsi_host_put(us_to_host(us));
+ quiesce_and_remove_host(us);
+ release_everything(us);
}
/***********************************************************************
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 625b7aa9807..a195adae57b 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -158,6 +158,7 @@ struct us_data {
/* SCSI interfaces */
struct scsi_cmnd *srb; /* current srb */
+ unsigned int tag; /* current dCBWTag */
/* thread information */
int pid; /* control thread */