diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/storage/libusual.c | 7 | ||||
-rw-r--r-- | drivers/usb/storage/scsiglue.c | 8 | ||||
-rw-r--r-- | drivers/usb/storage/transport.c | 110 | ||||
-rw-r--r-- | drivers/usb/storage/unusual_devs.h | 16 | ||||
-rw-r--r-- | drivers/usb/storage/usb.c | 6 | ||||
-rw-r--r-- | drivers/usb/storage/usb.h | 4 |
6 files changed, 150 insertions, 1 deletions
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index d617e8ae6b0..f970b27ba30 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -46,6 +46,12 @@ static int usu_probe_thread(void *arg); { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } +#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + #define USUAL_DEV(useProto, useTrans, useType) \ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ .driver_info = ((useType)<<24) } @@ -57,6 +63,7 @@ struct usb_device_id storage_usb_ids [] = { #undef USUAL_DEV #undef UNUSUAL_DEV +#undef COMPLIANT_DEV MODULE_DEVICE_TABLE(usb, storage_usb_ids); EXPORT_SYMBOL_GPL(storage_usb_ids); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index e9d6c196a7a..8d78084abf9 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -208,6 +208,14 @@ static int slave_configure(struct scsi_device *sdev) * sector in a larger then 1 sector read, since the performance * impact is negible we set this flag for all USB disks */ sdev->last_sector_bug = 1; + + /* Enable last-sector hacks for single-target devices using + * the Bulk-only transport, unless we already know the + * capacity will be decremented or is correct. */ + if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK | + US_FL_SCM_MULT_TARG)) && + us->protocol == US_PR_BULK) + us->use_last_sector_hacks = 1; } else { /* Non-disk-type devices don't need to blacklist any pages diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 9cc30afd6d3..1d5438e6363 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -57,6 +57,9 @@ #include "scsiglue.h" #include "debug.h" +#include <linux/blkdev.h> +#include "../../scsi/sd.h" + /*********************************************************************** * Data transfer routines @@ -511,6 +514,110 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, * Transport routines ***********************************************************************/ +/* There are so many devices that report the capacity incorrectly, + * this routine was written to counteract some of the resulting + * problems. + */ +static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) +{ + struct gendisk *disk; + struct scsi_disk *sdkp; + u32 sector; + + /* To Report "Medium Error: Record Not Found */ + static unsigned char record_not_found[18] = { + [0] = 0x70, /* current error */ + [2] = MEDIUM_ERROR, /* = 0x03 */ + [7] = 0x0a, /* additional length */ + [12] = 0x14 /* Record Not Found */ + }; + + /* If last-sector problems can't occur, whether because the + * capacity was already decremented or because the device is + * known to report the correct capacity, then we don't need + * to do anything. + */ + if (!us->use_last_sector_hacks) + return; + + /* Was this command a READ(10) or a WRITE(10)? */ + if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10) + goto done; + + /* Did this command access the last sector? */ + sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) | + (srb->cmnd[4] << 8) | (srb->cmnd[5]); + disk = srb->request->rq_disk; + if (!disk) + goto done; + sdkp = scsi_disk(disk); + if (!sdkp) + goto done; + if (sector + 1 != sdkp->capacity) + goto done; + + if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { + + /* The command succeeded. If the capacity is odd + * (i.e., if the sector number is even) then the + * "always-even" heuristic would be wrong for this + * device. Issue a WARN() so that the kerneloops.org + * project will be notified and we will then know to + * mark the device with a CAPACITY_OK flag. Hopefully + * this will occur for only a few devices. + * + * Use the sign of us->last_sector_hacks to tell whether + * the warning has already been issued; we don't need + * more than one warning per device. + */ + if (!(sector & 1) && us->use_last_sector_hacks > 0) { + unsigned vid = le16_to_cpu( + us->pusb_dev->descriptor.idVendor); + unsigned pid = le16_to_cpu( + us->pusb_dev->descriptor.idProduct); + unsigned rev = le16_to_cpu( + us->pusb_dev->descriptor.bcdDevice); + + WARN(1, "%s: Successful last sector success at %u, " + "device %04x:%04x:%04x\n", + sdkp->disk->disk_name, sector, + vid, pid, rev); + us->use_last_sector_hacks = -1; + } + + } else { + /* The command failed. Allow up to 3 retries in case this + * is some normal sort of failure. After that, assume the + * capacity is wrong and we're trying to access the sector + * beyond the end. Replace the result code and sense data + * with values that will cause the SCSI core to fail the + * command immediately, instead of going into an infinite + * (or even just a very long) retry loop. + */ + if (++us->last_sector_retries < 3) + return; + srb->result = SAM_STAT_CHECK_CONDITION; + memcpy(srb->sense_buffer, record_not_found, + sizeof(record_not_found)); + + /* In theory we might want to issue a WARN() here if the + * capacity is even, since it could indicate the device + * has the READ CAPACITY bug _and_ the real capacity is + * odd. But it could also indicate that the device + * simply can't access its last sector, a failure mode + * which is surprisingly common. So no warning. + */ + } + + done: + /* Don't reset the retry counter for TEST UNIT READY commands, + * because they get issued after device resets which might be + * caused by a failed last-sector access. + */ + if (srb->cmnd[0] != TEST_UNIT_READY) + us->last_sector_retries = 0; +} + /* Invoke the transport and basic error-handling/recovery methods * * This is used by the protocol layers to actually send the message to @@ -544,6 +651,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* if the transport provided its own sense data, don't auto-sense */ if (result == USB_STOR_TRANSPORT_NO_SENSE) { srb->result = SAM_STAT_CHECK_CONDITION; + last_sector_hacks(us, srb); return; } @@ -705,6 +813,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); + last_sector_hacks(us, srb); return; /* Error and abort processing: try to resynchronize with the device @@ -732,6 +841,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) us->transport_reset(us); } clear_bit(US_FLIDX_RESETTING, &us->dflags); + last_sector_hacks(us, srb); } /* Stop the current URB transfer */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 0330ed53ec1..035bbc5d823 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -27,7 +27,8 @@ /* IMPORTANT NOTE: This file must be included in another file which does * the following thing for it to work: - * The macro UNUSUAL_DEV() must be defined before this file is included + * The UNUSUAL_DEV, COMPLIANT_DEV, and USUAL_DEV macros must be defined + * before this file is included. */ /* If you edit this file, please try to keep it sorted first by VendorID, @@ -46,6 +47,12 @@ * <usb-storage@lists.one-eyed-alien.net> */ +/* Note: If you add an entry only in order to set the CAPACITY_OK flag, + * use the COMPLIANT_DEV macro instead of UNUSUAL_DEV. This is + * because such entries mark devices which actually work correctly, + * as opposed to devices that do something strangely or wrongly. + */ + /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> */ UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, @@ -704,6 +711,13 @@ UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100, US_SC_8070, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Added by Alan Stern <stern@rowland.harvard.edu> */ +COMPLIANT_DEV(0x0525, 0xa4a5, 0x0000, 0x9999, + "Linux", + "File-backed Storage Gadget", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_CAPACITY_OK ), + /* Yakumo Mega Image 37 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */ UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index ce0b580db5e..80e234bf4e5 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -134,6 +134,8 @@ static struct quirks_entry *quirks_list, *quirks_end; { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } +#define COMPLIANT_DEV UNUSUAL_DEV + #define USUAL_DEV(useProto, useTrans, useType) \ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ .driver_info = (USB_US_TYPE_STOR<<24) } @@ -142,6 +144,7 @@ static struct usb_device_id storage_usb_ids [] = { # include "unusual_devs.h" #undef UNUSUAL_DEV +#undef COMPLIANT_DEV #undef USUAL_DEV /* Terminating entry */ { } @@ -172,6 +175,8 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); .initFunction = init_function, \ } +#define COMPLIANT_DEV UNUSUAL_DEV + #define USUAL_DEV(use_protocol, use_transport, use_type) \ { \ .useProtocol = use_protocol, \ @@ -181,6 +186,7 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" # undef UNUSUAL_DEV +# undef COMPLIANT_DEV # undef USUAL_DEV /* Terminating entry */ diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index e4674fc715e..65e674e4be9 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -154,6 +154,10 @@ struct us_data { #ifdef CONFIG_PM pm_hook suspend_resume_hook; #endif + + /* hacks for READ CAPACITY bug handling */ + int use_last_sector_hacks; + int last_sector_retries; }; /* Convert between us_data and the corresponding Scsi_Host */ |