aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/serial/cypress_m8.c185
1 files changed, 88 insertions, 97 deletions
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9db23decc5b..f34a9bb6a21 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -16,6 +16,14 @@
* See http://geocities.com/i0xox0i for information on this driver and the
* earthmate usb device.
*
+ * Lonnie Mendez <dignome@gmail.com>
+ * 4-29-2005
+ * Fixed problem where setting or retreiving the serial config would fail with
+ * EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial
+ * adapters. Issued new interval of 1ms instead of the default 10ms. As a
+ * result, transfer speed has been substantially increased. From avg. 850bps to
+ * avg. 3300bps. initial termios has also been modified. Cleaned up code and
+ * formatting issues so it is more readable. Replaced the C++ style comments.
*
* Lonnie Mendez <dignome@gmail.com>
* 12-15-2004
@@ -32,12 +40,6 @@
* 10-2003
* Driver first released.
*
- *
- * Long Term TODO:
- * Improve transfer speeds - both read/write are somewhat slow
- * at this point.
- * Improve debugging. Show modem line status with debug output and
- * implement filtering for certain data as a module parameter.
*/
/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
@@ -72,11 +74,12 @@
static int debug;
#endif
static int stats;
+static int interval;
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.08"
+#define DRIVER_VERSION "v1.09"
#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
#define DRIVER_DESC "Cypress USB to Serial Driver"
@@ -130,7 +133,6 @@ struct cypress_private {
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
struct termios tmp_termios; /* stores the old termios settings */
- char calledfromopen; /* used when issuing lines on open - fixes rts drop bug */
};
/* write buffer structure */
@@ -168,10 +170,8 @@ static void cypress_buf_free(struct cypress_buf *cb);
static void cypress_buf_clear(struct cypress_buf *cb);
static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
- unsigned int count);
-static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
- unsigned int count);
+static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
+static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
static struct usb_serial_device_type cypress_earthmate_device = {
@@ -238,10 +238,9 @@ static struct usb_serial_device_type cypress_hidcom_device = {
static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
int parity_enable, int parity_type, int reset, int cypress_request_type)
{
- int i, n_baud_rate = 0, retval = 0;
+ int new_baudrate = 0, retval = 0, tries = 0;
struct cypress_private *priv;
- __u8 feature_buffer[5];
- __u8 config;
+ __u8 feature_buffer[8];
unsigned long flags;
dbg("%s", __FUNCTION__);
@@ -256,7 +255,8 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
* of 57600bps (I have no idea whether DeLorme chose to use the general purpose
* firmware or not), if you need to modify this speed setting for your own
* project please add your own chiptype and modify the code likewise. The
- * Cypress HID->COM device will work successfully up to 115200bps.
+ * Cypress HID->COM device will work successfully up to 115200bps (but the
+ * actual throughput is around 3kBps).
*/
if (baud_mask != priv->cbr_mask) {
dbg("%s - baud rate is changing", __FUNCTION__);
@@ -265,109 +265,114 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
* but are not used with NMEA and SiRF protocols */
if ( (baud_mask == B300) || (baud_mask == B600) ) {
- err("%s - failed setting baud rate, unsupported speed (default to 4800)",
+ err("%s - failed setting baud rate, unsupported speed",
__FUNCTION__);
- n_baud_rate = 4800;
- } else if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) {
- err("%s - failed setting baud rate, unsupported speed (default to 4800)",
+ new_baudrate = priv->baud_rate;
+ } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
+ err("%s - failed setting baud rate, unsupported speed",
__FUNCTION__);
- n_baud_rate = 4800;
+ new_baudrate = priv->baud_rate;
}
} else if (priv->chiptype == CT_CYPHIDCOM) {
- if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) {
- err("%s - failed setting baud rate, unsupported speed (default to 4800)",
+ if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
+ err("%s - failed setting baud rate, unsupported speed",
__FUNCTION__);
- n_baud_rate = 4800;
+ new_baudrate = priv->baud_rate;
}
} else if (priv->chiptype == CT_GENERIC) {
- if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) {
- err("%s - failed setting baud rate, unsupported speed (default to 4800)",
+ if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
+ err("%s - failed setting baud rate, unsupported speed",
__FUNCTION__);
- n_baud_rate = 4800;
+ new_baudrate = priv->baud_rate;
}
} else {
- info("%s - please define your chiptype, using 4800bps default", __FUNCTION__);
- n_baud_rate = 4800;
+ info("%s - please define your chiptype", __FUNCTION__);
+ new_baudrate = priv->baud_rate;
}
} else { /* baud rate not changing, keep the old */
- n_baud_rate = priv->baud_rate;
+ new_baudrate = priv->baud_rate;
}
- dbg("%s - baud rate is being sent as %d", __FUNCTION__, n_baud_rate);
-
+ dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
- /*
- * This algorithm accredited to Jiang Jay Zhang... thanks for all the help!
- */
- for (i = 0; i < 4; ++i) {
- feature_buffer[i] = ( n_baud_rate >> (i*8) & 0xFF );
- }
+ memset(feature_buffer, 0, 8);
+ /* fill the feature_buffer with new configuration */
+ *((u_int32_t *)feature_buffer) = new_baudrate;
- config = 0; // reset config byte
- config |= data_bits; // assign data bits in 2 bit space ( max 3 )
+ feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
/* 1 bit gap */
- config |= (stop_bits << 3); // assign stop bits in 1 bit space
- config |= (parity_enable << 4); // assign parity flag in 1 bit space
- config |= (parity_type << 5); // assign parity type in 1 bit space
+ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
+ feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
+ feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
/* 1 bit gap */
- config |= (reset << 7); // assign reset at end of byte, 1 bit space
-
- feature_buffer[4] = config;
+ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
dbg("%s - device is being sent this feature report:", __FUNCTION__);
dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
feature_buffer[2], feature_buffer[3], feature_buffer[4]);
+ do {
retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
- 0x0300, 0, feature_buffer, 5, 500);
+ 0x0300, 0, feature_buffer, 8, 500);
+
+ if (tries++ >= 3)
+ break;
- if (retval != 5)
+ if (retval == EPIPE)
+ usb_clear_halt(port->serial->dev, 0x00);
+ } while (retval != 8 && retval != ENODEV);
+
+ if (retval != 8)
err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
else {
spin_lock_irqsave(&priv->lock, flags);
- priv->baud_rate = n_baud_rate;
+ priv->baud_rate = new_baudrate;
priv->cbr_mask = baud_mask;
- priv->current_config = config;
- ++priv->cmd_count;
+ priv->current_config = feature_buffer[4];
spin_unlock_irqrestore(&priv->lock, flags);
}
break;
case CYPRESS_GET_CONFIG:
dbg("%s - retreiving serial line settings", __FUNCTION__);
- /* reset values in feature buffer */
- memset(feature_buffer, 0, 5);
+ /* set initial values in feature buffer */
+ memset(feature_buffer, 0, 8);
+ do {
retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
- 0x0300, 0, feature_buffer, 5, 500);
+ 0x0300, 0, feature_buffer, 8, 500);
+
+ if (tries++ >= 3)
+ break;
+
+ if (retval == EPIPE)
+ usb_clear_halt(port->serial->dev, 0x00);
+ } while (retval != 5 && retval != ENODEV);
+
if (retval != 5) {
err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
+
/* store the config in one byte, and later use bit masks to check values */
priv->current_config = feature_buffer[4];
- /* reverse the process above to get the baud_mask value */
- n_baud_rate = 0; // reset bits
- for (i = 0; i < 4; ++i) {
- n_baud_rate |= ( feature_buffer[i] << (i*8) );
- }
+ priv->baud_rate = *((u_int32_t *)feature_buffer);
- priv->baud_rate = n_baud_rate;
- if ( (priv->cbr_mask = rate_to_mask(n_baud_rate)) == 0x40)
+ if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
- ++priv->cmd_count;
spin_unlock_irqrestore(&priv->lock, flags);
}
- break;
- default:
- err("%s - unsupported serial control command issued", __FUNCTION__);
}
+ spin_lock_irqsave(&priv->lock, flags);
+ ++priv->cmd_count;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
return retval;
} /* cypress_serial_control */
-/* given a baud mask, it will return speed on success */
+/* given a baud mask, it will return integer baud on success */
static int mask_to_rate (unsigned mask)
{
int rate;
@@ -438,11 +443,12 @@ static int generic_startup (struct usb_serial *serial)
usb_reset_configuration (serial->dev);
+ interval = 1;
priv->cmd_ctrl = 0;
priv->line_control = 0;
priv->termios_initialized = 0;
- priv->calledfromopen = 0;
priv->rx_flags = 0;
+ priv->cbr_mask = B300;
usb_set_serial_port_data(serial->port[0], priv);
return (0);
@@ -513,7 +519,6 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
dbg("%s - port %d", __FUNCTION__, port->number);
/* clear halts before open */
- usb_clear_halt(serial->dev, 0x00);
usb_clear_halt(serial->dev, 0x81);
usb_clear_halt(serial->dev, 0x02);
@@ -531,7 +536,6 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
/* raise both lines and set termios */
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = CONTROL_DTR | CONTROL_RTS;
- priv->calledfromopen = 1;
priv->cmd_ctrl = 1;
spin_unlock_irqrestore(&priv->lock, flags);
result = cypress_write(port, NULL, 0);
@@ -553,7 +557,7 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, port->interrupt_in_urb->interval);
+ cypress_read_int_callback, port, interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result){
@@ -680,12 +684,12 @@ static void cypress_send(struct usb_serial_port *port)
spin_lock_irqsave(&priv->lock, flags);
switch (port->interrupt_out_size) {
case 32:
- // this is for the CY7C64013...
+ /* this is for the CY7C64013... */
offset = 2;
port->interrupt_out_buffer[0] = priv->line_control;
break;
case 8:
- // this is for the CY7C63743...
+ /* this is for the CY7C63743... */
offset = 1;
port->interrupt_out_buffer[0] = priv->line_control;
break;
@@ -738,6 +742,7 @@ send:
port->interrupt_out_urb->transfer_buffer_length = actual_size;
port->interrupt_out_urb->dev = port->serial->dev;
+ port->interrupt_out_urb->interval = interval;
result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
@@ -910,7 +915,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
unsigned cflag, iflag, baud_mask;
unsigned long flags;
__u8 oldlines;
- int linechange;
+ int linechange = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -996,15 +1001,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break;
default: dbg("%s - unknown masked baud rate", __FUNCTION__);
}
- priv->line_control |= CONTROL_DTR;
-
- /* toggle CRTSCTS? - don't do this if being called from cypress_open */
- if (!priv->calledfromopen) {
- if (cflag & CRTSCTS)
- priv->line_control |= CONTROL_RTS;
- else
- priv->line_control &= ~CONTROL_RTS;
- }
+ priv->line_control = (CONTROL_DTR | CONTROL_RTS);
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -1014,8 +1011,6 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable,
parity_type, 0, CYPRESS_SET_CONFIG);
- msleep(50); /* give some time between change and read (50ms) */
-
/* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure
* this should confirm that all is working if it returns what we just set */
cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
@@ -1031,7 +1026,6 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
dbg("Using custom termios settings for a baud rate of 4800bps.");
/* define custom termios settings for NMEA protocol */
-
tty->termios->c_iflag /* input modes - */
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
@@ -1052,23 +1046,16 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o
| ISIG /* disable interrupt, quit, and suspend special characters */
| IEXTEN); /* disable non-POSIX special characters */
- } else if (priv->chiptype == CT_CYPHIDCOM) {
-
- // Software app handling it for device...
+ } /* CT_CYPHIDCOM: Application should handle this for device */
- }
linechange = (priv->line_control != oldlines);
spin_unlock_irqrestore(&priv->lock, flags);
/* if necessary, set lines */
- if (!priv->calledfromopen && linechange) {
+ if (linechange) {
priv->cmd_ctrl = 1;
cypress_write(port, NULL, 0);
}
-
- if (priv->calledfromopen)
- priv->calledfromopen = 0;
-
} /* cypress_set_termios */
@@ -1164,7 +1151,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
spin_lock_irqsave(&priv->lock, flags);
switch(urb->actual_length) {
case 32:
- // This is for the CY7C64013...
+ /* This is for the CY7C64013... */
priv->current_status = data[0] & 0xF8;
bytes = data[1]+2;
i=2;
@@ -1172,7 +1159,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
havedata = 1;
break;
case 8:
- // This is for the CY7C63743...
+ /* This is for the CY7C63743... */
priv->current_status = data[0] & 0xF8;
bytes = (data[0] & 0x07)+1;
i=1;
@@ -1245,7 +1232,7 @@ continue_read:
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
cypress_read_int_callback, port,
- port->interrupt_in_urb->interval);
+ interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
@@ -1274,6 +1261,8 @@ static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs)
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
priv->write_urb_in_use = 0;
return;
+ case -EPIPE: /* no break needed */
+ usb_clear_halt(port->serial->dev, 0x02);
default:
/* error in the urb, so we have to resubmit it */
dbg("%s - Overflow in write", __FUNCTION__);
@@ -1535,3 +1524,5 @@ module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(stats, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(stats, "Enable statistics or not");
+module_param(interval, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(interval, "Overrides interrupt interval");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 14:58:10 +0000