diff options
Diffstat (limited to 'drivers/usb')
122 files changed, 9281 insertions, 1241 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index dcd49f1e96d..240750881d2 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -22,7 +22,6 @@ config USB_ARCH_HAS_HCD default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 default y if SUPERH # r8a66597-hcd - default y if MICROBLAZE default PCI # many non-PCI SOC chips embed OHCI @@ -39,6 +38,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_AT91 default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB + default y if ARCH_W90X900 # PPC: default y if STB03xxx default y if PPC_MPC52xx @@ -58,6 +58,8 @@ config USB_ARCH_HAS_EHCI default y if PPC_83xx default y if SOC_AU1200 default y if ARCH_IXP4XX + default y if ARCH_W90X900 + default y if ARCH_AT91SAM9G45 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 19cb7d5480d..be3c9b80bc9 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_XHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ +obj-$(CONFIG_USB_ISP1362_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ obj-$(CONFIG_USB_HWA_HCD) += host/ @@ -39,6 +40,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ +obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 85a1a55815c..e3861b21e77 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -59,6 +59,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> +#include <linux/serial.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> @@ -609,6 +610,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; tasklet_schedule(&acm->urb_task); + set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); done: mutex_unlock(&acm->mutex); diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index ba589d4ca8b..3e564bfe17d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -313,8 +313,13 @@ static ssize_t wdm_write r = usb_autopm_get_interface(desc->intf); if (r < 0) goto outnp; - r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, - &desc->flags)); + + if (!file->f_flags && O_NONBLOCK) + r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, + &desc->flags)); + else + if (test_bit(WDM_IN_USE, &desc->flags)) + r = -EAGAIN; if (r < 0) goto out; @@ -377,7 +382,7 @@ outnl: static ssize_t wdm_read (struct file *file, char __user *buffer, size_t count, loff_t *ppos) { - int rv, cntr; + int rv, cntr = 0; int i = 0; struct wdm_device *desc = file->private_data; @@ -389,10 +394,23 @@ static ssize_t wdm_read if (desc->length == 0) { desc->read = 0; retry: + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto err; + } i++; - rv = wait_event_interruptible(desc->wait, - test_bit(WDM_READ, &desc->flags)); + if (file->f_flags & O_NONBLOCK) { + if (!test_bit(WDM_READ, &desc->flags)) { + rv = cntr ? cntr : -EAGAIN; + goto err; + } + rv = 0; + } else { + rv = wait_event_interruptible(desc->wait, + test_bit(WDM_READ, &desc->flags)); + } + /* may have happened while we slept */ if (test_bit(WDM_DISCONNECTING, &desc->flags)) { rv = -ENODEV; goto err; @@ -448,7 +466,7 @@ retry: err: mutex_unlock(&desc->rlock); - if (rv < 0) + if (rv < 0 && rv != -EAGAIN) dev_err(&desc->intf->dev, "wdm_read: exit error\n"); return rv; } @@ -506,8 +524,6 @@ static int wdm_open(struct inode *inode, struct file *file) desc = usb_get_intfdata(intf); if (test_bit(WDM_DISCONNECTING, &desc->flags)) goto out; - - ; file->private_data = desc; rv = usb_autopm_get_interface(desc->intf); diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index b09a527f734..333ee02e7b2 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -57,7 +57,9 @@ MODULE_DEVICE_TABLE(usb, usbtmc_devices); /* * This structure is the capabilities for the device - * See section 4.2.1.8 of the USBTMC specification for details. + * See section 4.2.1.8 of the USBTMC specification, + * and section 4.2.2 of the USBTMC usb488 subclass + * specification for details. */ struct usbtmc_dev_capabilities { __u8 interface_capabilities; @@ -86,6 +88,8 @@ struct usbtmc_device_data { bool TermCharEnabled; bool auto_abort; + bool zombie; /* fd of disconnected device */ + struct usbtmc_dev_capabilities capabilities; struct kref kref; struct mutex io_mutex; /* only one i/o function running at a time */ @@ -367,13 +371,13 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, { struct usbtmc_device_data *data; struct device *dev; - unsigned long int n_characters; + u32 n_characters; u8 *buffer; int actual; - int done; - int remaining; + size_t done; + size_t remaining; int retval; - int this_part; + size_t this_part; /* Get pointer to private data structure */ data = filp->private_data; @@ -384,6 +388,10 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, return -ENOMEM; mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto exit; + } remaining = count; done = 0; @@ -401,10 +409,10 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, buffer[1] = data->bTag; buffer[2] = ~(data->bTag); buffer[3] = 0; /* Reserved */ - buffer[4] = (this_part - 12 - 3) & 255; - buffer[5] = ((this_part - 12 - 3) >> 8) & 255; - buffer[6] = ((this_part - 12 - 3) >> 16) & 255; - buffer[7] = ((this_part - 12 - 3) >> 24) & 255; + buffer[4] = (this_part) & 255; + buffer[5] = ((this_part) >> 8) & 255; + buffer[6] = ((this_part) >> 16) & 255; + buffer[7] = ((this_part) >> 24) & 255; buffer[8] = data->TermCharEnabled * 2; /* Use term character? */ buffer[9] = data->TermChar; @@ -455,6 +463,22 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, (buffer[6] << 16) + (buffer[7] << 24); + /* Ensure the instrument doesn't lie about it */ + if(n_characters > actual - 12) { + dev_err(dev, "Device lies about message size: %u > %d\n", n_characters, actual - 12); + n_characters = actual - 12; + } + + /* Ensure the instrument doesn't send more back than requested */ + if(n_characters > this_part) { + dev_err(dev, "Device returns more than requested: %zu > %zu\n", done + n_characters, done + this_part); + n_characters = this_part; + } + + /* Bound amount of data received by amount of data requested */ + if (n_characters > this_part) + n_characters = this_part; + /* Copy buffer to user space */ if (copy_to_user(buf + done, &buffer[12], n_characters)) { /* There must have been an addressing problem */ @@ -463,8 +487,11 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, } done += n_characters; - if (n_characters < USBTMC_SIZE_IOBUFFER) + /* Terminate if end-of-message bit recieved from device */ + if ((buffer[8] & 0x01) && (actual >= n_characters + 12)) remaining = 0; + else + remaining -= n_characters; } /* Update file position value */ @@ -496,6 +523,10 @@ static ssize_t usbtmc_write(struct file *filp, const char __user *buf, return -ENOMEM; mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto exit; + } remaining = count; done = 0; @@ -767,20 +798,21 @@ static int get_capabilities(struct usbtmc_device_data *data) } dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); - dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]); - dev_dbg(dev, "Device capabilities are %x\n", buffer[5]); - dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]); - dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); if (buffer[0] != USBTMC_STATUS_SUCCESS) { dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); rv = -EPERM; goto err_out; } + dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]); + dev_dbg(dev, "Device capabilities are %x\n", buffer[5]); + dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]); + dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); data->capabilities.interface_capabilities = buffer[4]; data->capabilities.device_capabilities = buffer[5]; data->capabilities.usb488_interface_capabilities = buffer[14]; data->capabilities.usb488_device_capabilities = buffer[15]; + rv = 0; err_out: kfree(buffer); @@ -925,6 +957,10 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) data = file->private_data; mutex_lock(&data->io_mutex); + if (data->zombie) { + retval = -ENODEV; + goto skip_io_on_zombie; + } switch (cmd) { case USBTMC_IOCTL_CLEAR_OUT_HALT: @@ -952,6 +988,7 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } +skip_io_on_zombie: mutex_unlock(&data->io_mutex); return retval; } @@ -995,6 +1032,7 @@ static int usbtmc_probe(struct usb_interface *intf, usb_set_intfdata(intf, data); kref_init(&data->kref); mutex_init(&data->io_mutex); + data->zombie = 0; /* Initialize USBTMC bTag and other fields */ data->bTag = 1; @@ -1065,14 +1103,30 @@ static void usbtmc_disconnect(struct usb_interface *intf) usb_deregister_dev(intf, &usbtmc_class); sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); + mutex_lock(&data->io_mutex); + data->zombie = 1; + mutex_unlock(&data->io_mutex); kref_put(&data->kref, usbtmc_delete); } +static int usbtmc_suspend (struct usb_interface *intf, pm_message_t message) +{ + /* this driver does not have pending URBs */ + return 0; +} + +static int usbtmc_resume (struct usb_interface *intf) +{ + return 0; +} + static struct usb_driver usbtmc_driver = { .name = "usbtmc", .id_table = usbtmc_devices, .probe = usbtmc_probe, - .disconnect = usbtmc_disconnect + .disconnect = usbtmc_disconnect, + .suspend = usbtmc_suspend, + .resume = usbtmc_resume, }; static int __init usbtmc_init(void) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index a16c538d013..0d3af6a6ee4 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -105,7 +105,7 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, ep->ss_ep_comp->extralen = i; buffer += i; size -= i; - retval = buffer - buffer_start + i; + retval = buffer - buffer_start; if (num_skipped > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", num_skipped, plural(num_skipped), diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 4247eccf858..181f78c8410 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -52,6 +52,7 @@ #include "hcd.h" /* for usbcore internals */ #include "usb.h" +#include "hub.h" #define USB_MAXBUS 64 #define USB_DEVICE_MAX USB_MAXBUS * 128 @@ -73,6 +74,7 @@ struct dev_state { void __user *disccontext; unsigned long ifclaimed; u32 secid; + u32 disabled_bulk_eps; }; struct async { @@ -87,6 +89,8 @@ struct async { struct urb *urb; int status; u32 secid; + u8 bulk_addr; + u8 bulk_status; }; static int usbfs_snoop; @@ -99,11 +103,15 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); dev_info(dev , format , ## arg); \ } while (0) -#define USB_DEVICE_DEV MKDEV(USB_DEVICE_MAJOR, 0) +enum snoop_when { + SUBMIT, COMPLETE +}; +#define USB_DEVICE_DEV MKDEV(USB_DEVICE_MAJOR, 0) #define MAX_USBFS_BUFFER_SIZE 16384 + static int connected(struct dev_state *ps) { return (!list_empty(&ps->list) && @@ -300,24 +308,79 @@ static struct async *async_getpending(struct dev_state *ps, return NULL; } -static void snoop_urb(struct urb *urb, void __user *userurb) +static void snoop_urb(struct usb_device *udev, + void __user *userurb, int pipe, unsigned length, + int timeout_or_status, enum snoop_when when) { - unsigned j; - unsigned char *data = urb->transfer_buffer; + static const char *types[] = {"isoc", "int", "ctrl", "bulk"}; + static const char *dirs[] = {"out", "in"}; + int ep; + const char *t, *d; if (!usbfs_snoop) return; - dev_info(&urb->dev->dev, "direction=%s\n", - usb_urb_dir_in(urb) ? "IN" : "OUT"); - dev_info(&urb->dev->dev, "userurb=%p\n", userurb); - dev_info(&urb->dev->dev, "transfer_buffer_length=%u\n", - urb->transfer_buffer_length); - dev_info(&urb->dev->dev, "actual_length=%u\n", urb->actual_length); - dev_info(&urb->dev->dev, "data: "); - for (j = 0; j < urb->transfer_buffer_length; ++j) - printk("%02x ", data[j]); - printk("\n"); + ep = usb_pipeendpoint(pipe); + t = types[usb_pipetype(pipe)]; + d = dirs[!!usb_pipein(pipe)]; + + if (userurb) { /* Async */ + if (when == SUBMIT) + dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + "length %u\n", + userurb, ep, t, d, length); + else + dev_info(&udev->dev, "userurb %p, ep%d %s-%s, " + "actual_length %u status %d\n", + userurb, ep, t, d, length, + timeout_or_status); + } else { + if (when == SUBMIT) + dev_info(&udev->dev, "ep%d %s-%s, length %u, " + "timeout %d\n", + ep, t, d, length, timeout_or_status); + else + dev_info(&udev->dev, "ep%d %s-%s, actual_length %u, " + "status %d\n", + ep, t, d, length, timeout_or_status); + } +} + +#define AS_CONTINUATION 1 +#define AS_UNLINK 2 + +static void cancel_bulk_urbs(struct dev_state *ps, unsigned bulk_addr) +__releases(ps->lock) +__acquires(ps->lock) +{ + struct async *as; + + /* Mark all the pending URBs that match bulk_addr, up to but not + * including the first one without AS_CONTINUATION. If such an + * URB is encountered then a new transfer has already started so + * the endpoint doesn't need to be disabled; otherwise it does. + */ + list_for_each_entry(as, &ps->async_pending, asynclist) { + if (as->bulk_addr == bulk_addr) { + if (as->bulk_status != AS_CONTINUATION) + goto rescan; + as->bulk_status = AS_UNLINK; + as->bulk_addr = 0; + } + } + ps->disabled_bulk_eps |= (1 << bulk_addr); + + /* Now carefully unlink all the marked pending URBs */ + rescan: + list_for_each_entry(as, &ps->async_pending, asynclist) { + if (as->bulk_status == AS_UNLINK) { + as->bulk_status = 0; /* Only once */ + spin_unlock(&ps->lock); /* Allow completions */ + usb_unlink_urb(as->urb); + spin_lock(&ps->lock); + goto rescan; + } + } } static void async_completed(struct urb *urb) @@ -346,7 +409,11 @@ static void async_completed(struct urb *urb) secid = as->secid; } snoop(&urb->dev->dev, "urb complete\n"); - snoop_urb(urb, as->userurb); + snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length, + as->status, COMPLETE); + if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET && + as->status != -ENOENT) + cancel_bulk_urbs(ps, as->bulk_addr); spin_unlock(&ps->lock); if (signr) @@ -655,6 +722,7 @@ static int usbdev_release(struct inode *inode, struct file *file) struct async *as; usb_lock_device(dev); + usb_hub_release_all_ports(dev, ps); /* Protect against simultaneous open */ mutex_lock(&usbfs_mutex); @@ -688,7 +756,7 @@ static int proc_control(struct dev_state *ps, void __user *arg) unsigned int tmo; unsigned char *tbuf; unsigned wLength; - int i, j, ret; + int i, pipe, ret; if (copy_from_user(&ctrl, arg, sizeof(ctrl))) return -EFAULT; @@ -708,24 +776,17 @@ static int proc_control(struct dev_state *ps, void __user *arg) free_page((unsigned long)tbuf); return -EINVAL; } - snoop(&dev->dev, "control read: bRequest=%02x " - "bRrequestType=%02x wValue=%04x " - "wIndex=%04x wLength=%04x\n", - ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, - ctrl.wIndex, ctrl.wLength); + pipe = usb_rcvctrlpipe(dev, 0); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); usb_unlock_device(dev); - i = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ctrl.bRequest, + i = usb_control_msg(dev, pipe, ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); + if ((i > 0) && ctrl.wLength) { - if (usbfs_snoop) { - dev_info(&dev->dev, "control read: data "); - for (j = 0; j < i; ++j) - printk("%02x ", (u8)(tbuf)[j]); - printk("\n"); - } if (copy_to_user(ctrl.data, tbuf, i)) { free_page((unsigned long)tbuf); return -EFAULT; @@ -738,22 +799,15 @@ static int proc_control(struct dev_state *ps, void __user *arg) return -EFAULT; } } - snoop(&dev->dev, "control write: bRequest=%02x " - "bRrequestType=%02x wValue=%04x " - "wIndex=%04x wLength=%04x\n", - ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, - ctrl.wIndex, ctrl.wLength); - if (usbfs_snoop) { - dev_info(&dev->dev, "control write: data: "); - for (j = 0; j < ctrl.wLength; ++j) - printk("%02x ", (unsigned char)(tbuf)[j]); - printk("\n"); - } + pipe = usb_sndctrlpipe(dev, 0); + snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT); + usb_unlock_device(dev); i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex, tbuf, ctrl.wLength, tmo); usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE); } free_page((unsigned long)tbuf); if (i < 0 && i != -EPIPE) { @@ -772,7 +826,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) unsigned int tmo, len1, pipe; int len2; unsigned char *tbuf; - int i, j, ret; + int i, ret; if (copy_from_user(&bulk, arg, sizeof(bulk))) return -EFAULT; @@ -799,18 +853,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) kfree(tbuf); return -EINVAL; } - snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n", - bulk.len, bulk.timeout); + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); + if (!i && len2) { - if (usbfs_snoop) { - dev_info(&dev->dev, "bulk read: data "); - for (j = 0; j < len2; ++j) - printk("%02x ", (u8)(tbuf)[j]); - printk("\n"); - } if (copy_to_user(bulk.data, tbuf, len2)) { kfree(tbuf); return -EFAULT; @@ -823,17 +873,12 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) return -EFAULT; } } - snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n", - bulk.len, bulk.timeout); - if (usbfs_snoop) { - dev_info(&dev->dev, "bulk write: data: "); - for (j = 0; j < len1; ++j) - printk("%02x ", (unsigned char)(tbuf)[j]); - printk("\n"); - } + snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT); + usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); + snoop_urb(dev, NULL, pipe, len2, i, COMPLETE); } kfree(tbuf); if (i < 0) @@ -991,6 +1036,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP | USBDEVFS_URB_SHORT_NOT_OK | + USBDEVFS_URB_BULK_CONTINUATION | USBDEVFS_URB_NO_FSBR | USBDEVFS_URB_ZERO_PACKET | USBDEVFS_URB_NO_INTERRUPT)) @@ -1051,13 +1097,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, is_in = 0; uurb->endpoint &= ~USB_DIR_IN; } - snoop(&ps->dev->dev, "control urb: bRequest=%02x " - "bRrequestType=%02x wValue=%04x " - "wIndex=%04x wLength=%04x\n", - dr->bRequest, dr->bRequestType, - __le16_to_cpup(&dr->wValue), - __le16_to_cpup(&dr->wIndex), - __le16_to_cpup(&dr->wLength)); break; case USBDEVFS_URB_TYPE_BULK: @@ -1070,7 +1109,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, uurb->number_of_packets = 0; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; - snoop(&ps->dev->dev, "bulk urb\n"); break; case USBDEVFS_URB_TYPE_ISO: @@ -1097,12 +1135,12 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, } totlen += isopkt[u].length; } - if (totlen > 32768) { + /* 3072 * 64 microframes */ + if (totlen > 196608) { kfree(isopkt); return -EINVAL; } uurb->buffer_length = totlen; - snoop(&ps->dev->dev, "iso urb\n"); break; case USBDEVFS_URB_TYPE_INTERRUPT: @@ -1111,7 +1149,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE) return -EINVAL; - snoop(&ps->dev->dev, "interrupt urb\n"); break; default: @@ -1198,11 +1235,46 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EFAULT; } } - snoop_urb(as->urb, as->userurb); + snoop_urb(ps->dev, as->userurb, as->urb->pipe, + as->urb->transfer_buffer_length, 0, SUBMIT); async_newpending(as); - if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) { + + if (usb_endpoint_xfer_bulk(&ep->desc)) { + spin_lock_irq(&ps->lock); + + /* Not exactly the endpoint address; the direction bit is + * shifted to the 0x10 position so that the value will be + * between 0 and 31. + */ + as->bulk_addr = usb_endpoint_num(&ep->desc) | + ((ep->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) + >> 3); + + /* If this bulk URB is the start of a new transfer, re-enable + * the endpoint. Otherwise mark it as a continuation URB. + */ + if (uurb->flags & USBDEVFS_URB_BULK_CONTINUATION) + as->bulk_status = AS_CONTINUATION; + else + ps->disabled_bulk_eps &= ~(1 << as->bulk_addr); + + /* Don't accept continuation URBs if the endpoint is + * disabled because of an earlier error. + */ + if (ps->disabled_bulk_eps & (1 << as->bulk_addr)) + ret = -EREMOTEIO; + else + ret = usb_submit_urb(as->urb, GFP_ATOMIC); + spin_unlock_irq(&ps->lock); + } else { + ret = usb_submit_urb(as->urb, GFP_KERNEL); + } + + if (ret) { dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); + snoop_urb(ps->dev, as->userurb, as->urb->pipe, + 0, ret, COMPLETE); async_removepending(as); free_async(as); return ret; @@ -1548,6 +1620,29 @@ static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg) } #endif +static int proc_claim_port(struct dev_state *ps, void __user *arg) +{ + unsigned portnum; + int rc; + + if (get_user(portnum, (unsigned __user *) arg)) + return -EFAULT; + rc = usb_hub_claim_port(ps->dev, portnum, ps); + if (rc == 0) + snoop(&ps->dev->dev, "port %d claimed by process %d: %s\n", + portnum, task_pid_nr(current), current->comm); + return rc; +} + +static int proc_release_port(struct dev_state *ps, void __user *arg) +{ + unsigned portnum; + + if (get_user(portnum, (unsigned __user *) arg)) + return -EFAULT; + return usb_hub_release_port(ps->dev, portnum, ps); +} + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -1645,7 +1740,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, break; case USBDEVFS_REAPURBNDELAY32: - snoop(&dev->dev, "%s: REAPURBDELAY32\n", __func__); + snoop(&dev->dev, "%s: REAPURBNDELAY32\n", __func__); ret = proc_reapurbnonblock_compat(ps, p); break; @@ -1666,7 +1761,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, break; case USBDEVFS_REAPURBNDELAY: - snoop(&dev->dev, "%s: REAPURBDELAY\n", __func__); + snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__); ret = proc_reapurbnonblock(ps, p); break; @@ -1689,6 +1784,16 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, snoop(&dev->dev, "%s: IOCTL\n", __func__); ret = proc_ioctl_default(ps, p); break; + + case USBDEVFS_CLAIM_PORT: + snoop(&dev->dev, "%s: CLAIM_PORT\n", __func__); + ret = proc_claim_port(ps, p); + break; + + case USBDEVFS_RELEASE_PORT: + snoop(&dev->dev, "%s: RELEASE_PORT\n", __func__); + ret = proc_release_port(ps, p); + break; } usb_unlock_device(dev); if (ret >= 0) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 69e5773abfc..4f864472c5c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -207,6 +207,9 @@ static int usb_probe_interface(struct device *dev) intf->needs_binding = 0; + if (usb_device_is_owned(udev)) + return -ENODEV; + if (udev->authorized == 0) { dev_err(&intf->dev, "Device is not authorized for usage\n"); return -ENODEV; @@ -232,28 +235,35 @@ static int usb_probe_interface(struct device *dev) /* The interface should always appear to be in use * unless the driver suports autosuspend. */ - intf->pm_usage_cnt = !(driver->supports_autosuspend); + atomic_set(&intf->pm_usage_cnt, !driver->supports_autosuspend); /* Carry out a deferred switch to altsetting 0 */ if (intf->needs_altsetting0) { - usb_set_interface(udev, intf->altsetting[0]. + error = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); + if (error < 0) + goto err; + intf->needs_altsetting0 = 0; } error = driver->probe(intf, id); - if (error) { - mark_quiesced(intf); - intf->needs_remote_wakeup = 0; - intf->condition = USB_INTERFACE_UNBOUND; - usb_cancel_queued_reset(intf); - } else - intf->condition = USB_INTERFACE_BOUND; + if (error) + goto err; + intf->condition = USB_INTERFACE_BOUND; usb_autosuspend_device(udev); } return error; + +err: + mark_quiesced(intf); + intf->needs_remote_wakeup = 0; + intf->condition = USB_INTERFACE_UNBOUND; + usb_cancel_queued_reset(intf); + usb_autosuspend_device(udev); + return error; } /* called from driver core with dev locked */ @@ -262,7 +272,7 @@ static int usb_unbind_interface(struct device *dev) struct usb_driver *driver = to_usb_driver(dev->driver); struct usb_interface *intf = to_usb_interface(dev); struct usb_device *udev; - int error; + int error, r; intf->condition = USB_INTERFACE_UNBINDING; @@ -290,11 +300,14 @@ static int usb_unbind_interface(struct device *dev) * Just re-enable it without affecting the endpoint toggles. */ usb_enable_interface(udev, intf, false); - } else if (!error && intf->dev.power.status == DPM_ON) - usb_set_interface(udev, intf->altsetting[0]. + } else if (!error && intf->dev.power.status == DPM_ON) { + r = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); - else + if (r < 0) + intf->needs_altsetting0 = 1; + } else { intf->needs_altsetting0 = 1; + } usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; @@ -344,7 +357,7 @@ int usb_driver_claim_interface(struct usb_driver *driver, usb_pm_lock(udev); iface->condition = USB_INTERFACE_BOUND; mark_active(iface); - iface->pm_usage_cnt = !(driver->supports_autosuspend); + atomic_set(&iface->pm_usage_cnt, !driver->supports_autosuspend); usb_pm_unlock(udev); /* if interface was already added, bind now; else let @@ -1065,7 +1078,7 @@ static int autosuspend_check(struct usb_device *udev, int reschedule) intf = udev->actconfig->interface[i]; if (!is_active(intf)) continue; - if (intf->pm_usage_cnt > 0) + if (atomic_read(&intf->pm_usage_cnt) > 0) return -EBUSY; if (intf->needs_remote_wakeup && !udev->do_remote_wakeup) { @@ -1461,17 +1474,19 @@ static int usb_autopm_do_interface(struct usb_interface *intf, status = -ENODEV; else { udev->auto_pm = 1; - intf->pm_usage_cnt += inc_usage_cnt; + atomic_add(inc_usage_cnt, &intf->pm_usage_cnt); udev->last_busy = jiffies; - if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { + if (inc_usage_cnt >= 0 && + atomic_read(&intf->pm_usage_cnt) > 0) { if (udev->state == USB_STATE_SUSPENDED) status = usb_resume_both(udev, PMSG_AUTO_RESUME); if (status != 0) - intf->pm_usage_cnt -= inc_usage_cnt; + atomic_sub(inc_usage_cnt, &intf->pm_usage_cnt); else udev->last_busy = jiffies; - } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) { + } else if (inc_usage_cnt <= 0 && + atomic_read(&intf->pm_usage_cnt) <= 0) { status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); } } @@ -1516,7 +1531,7 @@ void usb_autopm_put_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, -1); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, intf->pm_usage_cnt); + __func__, status, atomic_read(&intf->pm_usage_cnt)); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1544,10 +1559,10 @@ void usb_autopm_put_interface_async(struct usb_interface *intf) status = -ENODEV; } else { udev->last_busy = jiffies; - --intf->pm_usage_cnt; + atomic_dec(&intf->pm_usage_cnt); if (udev->autosuspend_disabled || udev->autosuspend_delay < 0) status = -EPERM; - else if (intf->pm_usage_cnt <= 0 && + else if (atomic_read(&intf->pm_usage_cnt) <= 0 && !timer_pending(&udev->autosuspend.timer)) { queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, round_jiffies_up_relative( @@ -1555,7 +1570,7 @@ void usb_autopm_put_interface_async(struct usb_interface *intf) } } dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, intf->pm_usage_cnt); + __func__, status, atomic_read(&intf->pm_usage_cnt)); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async); @@ -1599,7 +1614,7 @@ int usb_autopm_get_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, 1); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, intf->pm_usage_cnt); + __func__, status, atomic_read(&intf->pm_usage_cnt)); return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); @@ -1627,10 +1642,14 @@ int usb_autopm_get_interface_async(struct usb_interface *intf) status = -ENODEV; else if (udev->autoresume_disabled) status = -EPERM; - else if (++intf->pm_usage_cnt > 0 && udev->state == USB_STATE_SUSPENDED) - queue_work(ksuspend_usb_wq, &udev->autoresume); + else { + atomic_inc(&intf->pm_usage_cnt); + if (atomic_read(&intf->pm_usage_cnt) > 0 && + udev->state == USB_STATE_SUSPENDED) + queue_work(ksuspend_usb_wq, &udev->autoresume); + } dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, intf->pm_usage_cnt); + __func__, status, atomic_read(&intf->pm_usage_cnt)); return status; } EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async); @@ -1652,7 +1671,7 @@ int usb_autopm_set_interface(struct usb_interface *intf) status = usb_autopm_do_interface(intf, 0); dev_vdbg(&intf->dev, "%s: status %d cnt %d\n", - __func__, status, intf->pm_usage_cnt); + __func__, status, atomic_read(&intf->pm_usage_cnt)); return status; } EXPORT_SYMBOL_GPL(usb_autopm_set_interface); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 30ecac3af15..05e6d313961 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -158,7 +158,9 @@ static int generic_probe(struct usb_device *udev) /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ - if (udev->authorized == 0) + if (usb_device_is_owned(udev)) + ; /* Don't configure if the device is owned */ + else if (udev->authorized == 0) dev_err(&udev->dev, "Device is not authorized for usage\n"); else { c = usb_choose_configuration(udev); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 95ccfa0b9fc..34de475f016 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -337,72 +337,89 @@ static const u8 ss_rh_config_descriptor[] = { /*-------------------------------------------------------------------------*/ -/* - * helper routine for returning string descriptors in UTF-16LE - * input can actually be ISO-8859-1; ASCII is its 7-bit subset +/** + * ascii2desc() - Helper routine for producing UTF-16LE string descriptors + * @s: Null-terminated ASCII (actually ISO-8859-1) string + * @buf: Buffer for USB string descriptor (header + UTF-16LE) + * @len: Length (in bytes; may be odd) of descriptor buffer. + * + * The return value is the number of bytes filled in: 2 + 2*strlen(s) or + * buflen, whichever is less. + * + * USB String descriptors can contain at most 126 characters; input + * strings longer than that are truncated. */ -static unsigned ascii2utf(char *s, u8 *utf, int utfmax) +static unsigned +ascii2desc(char const *s, u8 *buf, unsigned len) { - unsigned retval; + unsigned n, t = 2 + 2*strlen(s); - for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *s++; - *utf++ = 0; - } - if (utfmax > 0) { - *utf = *s; - ++retval; + if (t > 254) + t = 254; /* Longest possible UTF string descriptor */ + if (len > t) + len = t; + + t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */ + + n = len; + while (n--) { + *buf++ = t; + if (!n--) + break; + *buf++ = t >> 8; + t = (unsigned char)*s++; } - return retval; + return len; } -/* - * rh_string - provides manufacturer, product and serial strings for root hub - * @id: the string ID number (1: serial number, 2: product, 3: vendor) +/** + * rh_string() - provides string descriptors for root hub + * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor) * @hcd: the host controller for this root hub - * @data: return packet in UTF-16 LE - * @len: length of the return packet + * @data: buffer for output packet + * @len: length of the provided buffer * * Produces either a manufacturer, product or serial number string for the * virtual root hub device. + * Returns the number of bytes filled in: the length of the descriptor or + * of the provided buffer, whichever is less. */ -static unsigned rh_string(int id, struct usb_hcd *hcd, u8 *data, unsigned len) +static unsigned +rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) { - char buf [100]; + char buf[100]; + char const *s; + static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; // language ids - if (id == 0) { - buf[0] = 4; buf[1] = 3; /* 4 bytes string data */ - buf[2] = 0x09; buf[3] = 0x04; /* MSFT-speak for "en-us" */ - len = min_t(unsigned, len, 4); - memcpy (data, buf, len); + switch (id) { + case 0: + /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */ + /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */ + if (len > 4) + len = 4; + memcpy(data, langids, len); return len; - - // serial number - } else if (id == 1) { - strlcpy (buf, hcd->self.bus_name, sizeof buf); - - // product description - } else if (id == 2) { - strlcpy (buf, hcd->product_desc, sizeof buf); - - // id 3 == vendor description - } else if (id == 3) { + case 1: + /* Serial number */ + s = hcd->self.bus_name; + break; + case 2: + /* Product name */ + s = hcd->product_desc; + break; + case 3: + /* Manufacturer */ snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname, init_utsname()->release, hcd->driver->description); - } - - switch (len) { /* All cases fall through */ + s = buf; + break; default: - len = 2 + ascii2utf (buf, data + 2, len - 2); - case 2: - data [1] = 3; /* type == string */ - case 1: - data [0] = 2 * (strlen (buf) + 1); - case 0: - ; /* Compiler wants a statement here */ + /* Can't happen; caller guarantees it */ + return 0; } - return len; + + return ascii2desc(s, data, len); } diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index ec5c67ea07b..79782a1c43f 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -267,6 +267,11 @@ struct hc_driver { void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* Notifies the HCD after a hub descriptor is fetched. + * Will block. + */ + int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 71f86c60d83..5ce839137ad 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -78,6 +78,7 @@ struct usb_hub { u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; struct delayed_work init_work; + void **port_owners; }; @@ -162,8 +163,10 @@ static inline char *portspeed(int portstatus) } /* Note that hdev or one of its children must be locked! */ -static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev) +static struct usb_hub *hdev_to_hub(struct usb_device *hdev) { + if (!hdev || !hdev->actconfig) + return NULL; return usb_get_intfdata(hdev->actconfig->interface[0]); } @@ -372,7 +375,7 @@ static void kick_khubd(struct usb_hub *hub) unsigned long flags; /* Suppress autosuspend until khubd runs */ - to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; + atomic_set(&to_usb_interface(hub->intfdev)->pm_usage_cnt, 1); spin_lock_irqsave(&hub_event_lock, flags); if (!hub->disconnected && list_empty(&hub->event_list)) { @@ -384,8 +387,10 @@ static void kick_khubd(struct usb_hub *hub) void usb_kick_khubd(struct usb_device *hdev) { - /* FIXME: What if hdev isn't bound to the hub driver? */ - kick_khubd(hdev_to_hub(hdev)); + struct usb_hub *hub = hdev_to_hub(hdev); + + if (hub) + kick_khubd(hub); } @@ -677,7 +682,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) msecs_to_jiffies(delay)); /* Suppress autosuspend until init is done */ - to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; + atomic_set(&to_usb_interface(hub->intfdev)-> + pm_usage_cnt, 1); return; /* Continues at init2: below */ } else { hub_power_on(hub, true); @@ -854,25 +860,24 @@ static int hub_post_reset(struct usb_interface *intf) static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { + struct usb_hcd *hcd; struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; u16 hubstatus, hubchange; u16 wHubCharacteristics; unsigned int pipe; int maxp, ret; - char *message; + char *message = "out of memory"; hub->buffer = usb_buffer_alloc(hdev, sizeof(*hub->buffer), GFP_KERNEL, &hub->buffer_dma); if (!hub->buffer) { - message = "can't allocate hub irq buffer"; ret = -ENOMEM; goto fail; } hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL); if (!hub->status) { - message = "can't kmalloc hub status buffer"; ret = -ENOMEM; goto fail; } @@ -880,7 +885,6 @@ static int hub_configure(struct usb_hub *hub, hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL); if (!hub->descriptor) { - message = "can't kmalloc hub descriptor"; ret = -ENOMEM; goto fail; } @@ -904,6 +908,12 @@ static int hub_configure(struct usb_hub *hub, dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, (hdev->maxchild == 1) ? "" : "s"); + hub->port_owners = kzalloc(hdev->maxchild * sizeof(void *), GFP_KERNEL); + if (!hub->port_owners) { + ret = -ENOMEM; + goto fail; + } + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); if (wHubCharacteristics & HUB_CHAR_COMPOUND) { @@ -1052,6 +1062,19 @@ static int hub_configure(struct usb_hub *hub, dev_dbg(hub_dev, "%umA bus power budget for each child\n", hub->mA_per_port); + /* Update the HCD's internal representation of this hub before khubd + * starts getting port status changes for devices under the hub. + */ + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_KERNEL); + if (ret < 0) { + message = "can't update HCD hub info"; + goto fail; + } + } + ret = hub_hub_status(hub, &hubstatus, &hubchange); if (ret < 0) { message = "can't get hub status"; @@ -1082,7 +1105,6 @@ static int hub_configure(struct usb_hub *hub, hub->urb = usb_alloc_urb(0, GFP_KERNEL); if (!hub->urb) { - message = "couldn't allocate interrupt urb"; ret = -ENOMEM; goto fail; } @@ -1131,11 +1153,13 @@ static void hub_disconnect(struct usb_interface *intf) hub_quiesce(hub, HUB_DISCONNECT); usb_set_intfdata (intf, NULL); + hub->hdev->maxchild = 0; if (hub->hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; usb_free_urb(hub->urb); + kfree(hub->port_owners); kfree(hub->descriptor); kfree(hub->status); usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer, @@ -1250,6 +1274,79 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) } } +/* + * Allow user programs to claim ports on a hub. When a device is attached + * to one of these "claimed" ports, the program will "own" the device. + */ +static int find_port_owner(struct usb_device *hdev, unsigned port1, + void ***ppowner) +{ + if (hdev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (port1 == 0 || port1 > hdev->maxchild) + return -EINVAL; + + /* This assumes that devices not managed by the hub driver + * will always have maxchild equal to 0. + */ + *ppowner = &(hdev_to_hub(hdev)->port_owners[port1 - 1]); + return 0; +} + +/* In the following three functions, the caller must hold hdev's lock */ +int usb_hub_claim_port(struct usb_device *hdev, unsigned port1, void *owner) +{ + int rc; + void **powner; + + rc = find_port_owner(hdev, port1, &powner); + if (rc) + return rc; + if (*powner) + return -EBUSY; + *powner = owner; + return rc; +} + +int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void *owner) +{ + int rc; + void **powner; + + rc = find_port_owner(hdev, port1, &powner); + if (rc) + return rc; + if (*powner != owner) + return -ENOENT; + *powner = NULL; + return rc; +} + +void usb_hub_release_all_ports(struct usb_device *hdev, void *owner) +{ + int n; + void **powner; + + n = find_port_owner(hdev, 1, &powner); + if (n == 0) { + for (; n < hdev->maxchild; (++n, ++powner)) { + if (*powner == owner) + *powner = NULL; + } + } +} + +/* The caller must hold udev's lock */ +bool usb_device_is_owned(struct usb_device *udev) +{ + struct usb_hub *hub; + + if (udev->state == USB_STATE_NOTATTACHED || !udev->parent) + return false; + hub = hdev_to_hub(udev->parent); + return !!hub->port_owners[udev->portnum - 1]; +} + static void recursively_mark_NOTATTACHED(struct usb_device *udev) { @@ -2849,14 +2946,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, /* For a suspended device, treat this as a * remote wakeup event. */ - if (udev->do_remote_wakeup) - status = remote_wakeup(udev); - - /* Otherwise leave it be; devices can't tell the - * difference between suspended and disabled. - */ - else - status = 0; + status = remote_wakeup(udev); #endif } else { diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index ffe75e83787..97b40ce133f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -48,7 +48,6 @@ #define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO) #define USBFS_DEFAULT_LISTMODE S_IRUGO -static struct super_operations usbfs_ops; static const struct file_operations default_file_operations; static struct vfsmount *usbfs_mount; static int usbfs_mount_count; /* = 0 */ @@ -449,7 +448,7 @@ static const struct file_operations default_file_operations = { .llseek = default_file_lseek, }; -static struct super_operations usbfs_ops = { +static const struct super_operations usbfs_ops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, .remount_fs = remount, diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 9720e699f47..da718e84d58 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -459,35 +459,23 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, io->urbs[i]->context = io; /* - * Some systems need to revert to PIO when DMA is - * temporarily unavailable. For their sakes, both - * transfer_buffer and transfer_dma are set when - * possible. However this can only work on systems - * without: + * Some systems need to revert to PIO when DMA is temporarily + * unavailable. For their sakes, both transfer_buffer and + * transfer_dma are set when possible. * - * - HIGHMEM, since DMA buffers located in high memory - * are not directly addressable by the CPU for PIO; - * - * - IOMMU, since dma_map_sg() is allowed to use an - * IOMMU to make virtually discontiguous buffers be - * "dma-contiguous" so that PIO and DMA need diferent - * numbers of URBs. - * - * So when HIGHMEM or IOMMU are in use, transfer_buffer - * is NULL to prevent stale pointers and to help spot - * bugs. + * Note that if IOMMU coalescing occurred, we cannot + * trust sg_page anymore, so check if S/G list shrunk. */ + if (io->nents == io->entries && !PageHighMem(sg_page(sg))) + io->urbs[i]->transfer_buffer = sg_virt(sg); + else + io->urbs[i]->transfer_buffer = NULL; + if (dma) { io->urbs[i]->transfer_dma = sg_dma_address(sg); len = sg_dma_len(sg); -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU) - io->urbs[i]->transfer_buffer = NULL; -#else - io->urbs[i]->transfer_buffer = sg_virt(sg); -#endif } else { /* hc may use _only_ transfer_buffer */ - io->urbs[i]->transfer_buffer = sg_virt(sg); len = sg->length; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 43ee943d757..b1b85abb9a2 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -413,8 +413,13 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, } else { snprintf(dev->devpath, sizeof dev->devpath, "%s.%d", parent->devpath, port1); - dev->route = parent->route + - (port1 << ((parent->level - 1)*4)); + /* Route string assumes hubs have less than 16 ports */ + if (port1 < 15) + dev->route = parent->route + + (port1 << ((parent->level - 1)*4)); + else + dev->route = parent->route + + (15 << ((parent->level - 1)*4)); } dev->dev.parent = &parent->dev; @@ -914,11 +919,11 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in, || !(bus = dev->bus) || !(controller = bus->controller) || !controller->dma_mask) - return -1; + return -EINVAL; /* FIXME generic api broken like pci, can't report errors */ return dma_map_sg(controller, sg, nents, - is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE); + is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM; } EXPORT_SYMBOL_GPL(usb_buffer_map_sg); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index c0e0ae2bb8e..9a8b15e6377 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -37,6 +37,13 @@ extern int usb_match_device(struct usb_device *dev, extern void usb_forced_unbind_intf(struct usb_interface *intf); extern void usb_rebind_intf(struct usb_interface *intf); +extern int usb_hub_claim_port(struct usb_device *hdev, unsigned port, + void *owner); +extern int usb_hub_release_port(struct usb_device *hdev, unsigned port, + void *owner); +extern void usb_hub_release_all_ports(struct usb_device *hdev, void *owner); +extern bool usb_device_is_owned(struct usb_device *udev); + extern int usb_hub_init(void); extern void usb_hub_cleanup(void); extern int usb_major_init(void); diff --git a/drivers/usb/early/Makefile b/drivers/usb/early/Makefile new file mode 100644 index 00000000000..dfedee8c45b --- /dev/null +++ b/drivers/usb/early/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for early USB devices +# + +obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c new file mode 100644 index 00000000000..1206a26ef89 --- /dev/null +++ b/drivers/usb/early/ehci-dbgp.c @@ -0,0 +1,996 @@ +/* + * Standalone EHCI usb debug driver + * + * Originally written by: + * Eric W. Biederman" <ebiederm@xmission.com> and + * Yinghai Lu <yhlu.kernel@gmail.com> + * + * Changes for early/late printk and HW errata: + * Jason Wessel <jason.wessel@windriver.com> + * Copyright (C) 2009 Wind River Systems, Inc. + * + */ + +#include <linux/console.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> +#include <linux/usb/ch9.h> +#include <linux/usb/ehci_def.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/pci-direct.h> +#include <asm/fixmap.h> + +/* The code here is intended to talk directly to the EHCI debug port + * and does not require that you have any kind of USB host controller + * drivers or USB device drivers compiled into the kernel. + * + * If you make a change to anything in here, the following test cases + * need to pass where a USB debug device works in the following + * configurations. + * + * 1. boot args: earlyprintk=dbgp + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * 2. boot args: earlyprintk=dbgp,keep + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * 3. boot args: earlyprintk=dbgp console=ttyUSB0 + * o kernel has CONFIG_USB_EHCI_HCD=y and + * CONFIG_USB_SERIAL_DEBUG=y + * 4. boot args: earlyprintk=vga,dbgp + * o kernel compiled with # CONFIG_USB_EHCI_HCD is not set + * o kernel compiled with CONFIG_USB_EHCI_HCD=y + * + * For the 4th configuration you can turn on or off the DBGP_DEBUG + * such that you can debug the dbgp device's driver code. + */ + +static int dbgp_phys_port = 1; + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static int dbgp_not_safe; /* Cannot use debug device during ehci reset */ +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +#ifdef DBGP_DEBUG +#define dbgp_printk printk +static void dbgp_ehci_status(char *str) +{ + if (!ehci_debug) + return; + dbgp_printk("dbgp: %s\n", str); + dbgp_printk(" Debug control: %08x", readl(&ehci_debug->control)); + dbgp_printk(" ehci cmd : %08x", readl(&ehci_regs->command)); + dbgp_printk(" ehci conf flg: %08x\n", + readl(&ehci_regs->configured_flag)); + dbgp_printk(" ehci status : %08x", readl(&ehci_regs->status)); + dbgp_printk(" ehci portsc : %08x\n", + readl(&ehci_regs->port_status[dbgp_phys_port - 1])); +} +#else +static inline void dbgp_ehci_status(char *str) { } +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 +#define DBGP_TIMEOUT (250 * 1000) + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = DBGP_TIMEOUT; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + udelay(1); + } while (--loop > 0); + + if (!loop) + return -DBGP_TIMEOUT; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static inline void dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) { + /* A -DBGP_TIMEOUT failure here means the device has + * failed, perhaps because it was unplugged, in which + * case we do not want to hang the system so the dbgp + * will be marked as unsafe to use. EHCI reset is the + * only way to recover if you unplug the dbgp device. + */ + if (ret == -DBGP_TIMEOUT && !dbgp_not_safe) + dbgp_not_safe = 1; + return ret; + } + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static inline void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static inline void dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_out(u32 addr, const char *bytes, int size) +{ + u32 pids, ctrl; + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + return dbgp_wait_until_done(ctrl); +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + int ret; + int loops = 5; + u32 addr; + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); +try_again: + if (loops--) { + ret = dbgp_out(addr, bytes, size); + if (ret == -DBGP_ERR_BAD) { + int try_loops = 3; + do { + /* Emit a dummy packet to re-sync communication + * with the debug device */ + if (dbgp_out(addr, "12345678", 8) >= 0) { + udelay(2); + goto try_again; + } + } while (try_loops--); + } + } + + return ret; +} + +static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int dbgp_control_msg(unsigned devnum, int requesttype, + int request, int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = cpu_to_le16(value); + req.wIndex = cpu_to_le16(index); + req.wLength = cpu_to_le16(size); + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int dbgp_ehci_startup(void) +{ + u32 ctrl, cmd, status; + int loop; + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + udelay(1); + + dbgp_ehci_status("EHCI startup"); + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + if (!(status & STS_HALT)) + break; + udelay(1); + } while (--loop > 0); + + if (!loop) { + dbgp_printk("ehci can not be started\n"); + return -ENODEV; + } + dbgp_printk("ehci started\n"); + return 0; +} + +static int dbgp_ehci_controller_reset(void) +{ + int loop = 250 * 1000; + u32 cmd; + + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_ehci_status("ehci reset done"); + return 0; +} +static int ehci_wait_for_port(int port); +/* Return 0 on success + * Return -ENODEV for any general failure + * Return -EIO if wait for port fails + */ +int dbgp_external_startup(void) +{ + int devnum; + struct usb_debug_descriptor dbgp_desc; + int ret; + u32 ctrl, portsc, cmd; + int dbg_port = dbgp_phys_port; + int tries = 3; + int reset_port_tries = 1; + int try_hard_once = 1; + +try_port_reset_again: + ret = dbgp_ehci_startup(); + if (ret) + return ret; + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(dbg_port); + if (ret < 0) { + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + if (!(portsc & PORT_CONNECT) && try_hard_once) { + /* Last ditch effort to try to force enable + * the debug device by using the packet test + * ehci command to try and wake it up. */ + try_hard_once = 0; + cmd = readl(&ehci_regs->command); + cmd &= ~CMD_RUN; + writel(cmd, &ehci_regs->command); + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + portsc |= PORT_TEST_PKT; + writel(portsc, &ehci_regs->port_status[dbg_port - 1]); + dbgp_ehci_status("Trying to force debug port online"); + mdelay(50); + dbgp_ehci_controller_reset(); + goto try_port_reset_again; + } else if (reset_port_tries--) { + goto try_port_reset_again; + } + dbgp_printk("No device found in debug port\n"); + return -EIO; + } + dbgp_ehci_status("wait for port done"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + return -ENODEV; + } + dbgp_ehci_status("debug ported enabled"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[dbg_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[dbg_port - 1]); + + dbgp_mdelay(100); + +try_again: + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + dbgp_not_safe = 0; + + return 0; +err: + if (tries--) + goto try_again; + return -ENODEV; +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); + +static int __init ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + dbgp_ehci_status("reset port"); + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + portsc = readl(&ehci_regs->port_status[port - 1]); + if (!(portsc & PORT_RESET)) + break; + } + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 100 * 1000; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + udelay(1); + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + return -EBUSY; +} + +static int ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 300; reps++) { + status = readl(&ehci_regs->status); + if (status & STS_PCD) + break; + dbgp_mdelay(1); + } + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + return -ENOTCONN; +} + +typedef void (*set_debug_port_t)(int port); + +static void __init default_set_debug_port(int port) +{ +} + +static set_debug_port_t __initdata set_debug_port = default_set_debug_port; + +static void __init nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +/* The code in early_ehci_bios_handoff() is derived from the usb pci + * quirk initialization, but altered so as to use the early PCI + * routines. */ +#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ +#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ +static void __init early_ehci_bios_handoff(void) +{ + u32 hcc_params = readl(&ehci_caps->hcc_params); + int offset = (hcc_params >> 8) & 0xff; + u32 cap; + int msec; + + if (!offset) + return; + + cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset); + dbgp_printk("dbgp: ehci BIOS state %08x\n", cap); + + if ((cap & 0xff) == 1 && (cap & EHCI_USBLEGSUP_BIOS)) { + dbgp_printk("dbgp: BIOS handoff\n"); + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset + 3, 1); + } + + /* if boot firmware now owns EHCI, spin till it hands it over. */ + msec = 1000; + while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) { + mdelay(10); + msec -= 10; + cap = read_pci_config(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset); + } + + if (cap & EHCI_USBLEGSUP_BIOS) { + /* well, possibly buggy BIOS... try to shut it down, + * and hope nothing goes too wrong */ + dbgp_printk("dbgp: BIOS handoff failed: %08x\n", cap); + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, + ehci_dev.func, offset + 2, 0); + } + + /* just in case, always disable EHCI SMIs */ + write_pci_config_byte(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + offset + EHCI_USBLEGCTLSTS, 0); +} + +static int __init ehci_setup(void) +{ + u32 ctrl, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + int ret, i; + int port_map_tried; + int playtimes = 3; + + early_ehci_bios_handoff(); + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + dbgp_phys_port = debug_port; + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + dbgp_ehci_status(""); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + /* Only reset the controller if it is not already in the + * configured state */ + if (!(readl(&ehci_regs->configured_flag) & FLAG_CF)) { + if (dbgp_ehci_controller_reset() != 0) + return -1; + } else { + dbgp_ehci_status("ehci skip - already configured"); + } + + ret = dbgp_external_startup(); + if (ret == -EIO) + goto next_debug_port; + + if (ret < 0) { + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + } + return 0; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<<n_ports) - 1)) { + set_debug_port(new_debug_port); + goto try_next_port; + } + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + + return -1; +} + +int __init early_dbgp_init(char *s) +{ + u32 debug_port, bar, offset; + u32 bus, slot, func, cap; + void __iomem *ehci_bar; + u32 dbgp_num; + u32 bar_val; + char *e; + int ret; + u8 byte; + + if (!early_pci_allowed()) + return -1; + + dbgp_num = 0; + if (*s) + dbgp_num = simple_strtoul(s, &e, 10); + dbgp_printk("dbgp_num: %d\n", dbgp_num); + + cap = find_dbgp(dbgp_num, &bus, &slot, &func); + if (!cap) + return -1; + + dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, + func); + + debug_port = read_pci_config(bus, slot, func, cap); + bar = (debug_port >> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = NULL; + + return -1; + } + dbgp_ehci_status("early_init_complete"); + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + char buf[DBGP_MAX_PACKET]; + int use_cr = 0; + u32 cmd, ctrl; + int reset_run = 0; + + if (!ehci_debug || dbgp_not_safe) + return; + + cmd = readl(&ehci_regs->command); + if (unlikely(!(cmd & CMD_RUN))) { + /* If the ehci controller is not in the run state do extended + * checks to see if the acpi or some other initialization also + * reset the ehci debug port */ + ctrl = readl(&ehci_debug->control); + if (!(ctrl & DBGP_ENABLED)) { + dbgp_not_safe = 1; + dbgp_external_startup(); + } else { + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + reset_run = 1; + } + } + while (n > 0) { + for (chunk = 0; chunk < DBGP_MAX_PACKET && n > 0; + str++, chunk++, n--) { + if (!use_cr && *str == '\n') { + use_cr = 1; + buf[chunk] = '\r'; + str--; + n++; + continue; + } + if (use_cr) + use_cr = 0; + buf[chunk] = *str; + } + if (chunk > 0) { + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, buf, chunk); + } + } + if (unlikely(reset_run)) { + cmd = readl(&ehci_regs->command); + cmd &= ~CMD_RUN; + writel(cmd, &ehci_regs->command); + } +} + +struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +int dbgp_reset_prep(void) +{ + u32 ctrl; + + dbgp_not_safe = 1; + if (!ehci_debug) + return 0; + + if (early_dbgp_console.index != -1 && + !(early_dbgp_console.flags & CON_BOOT)) + return 1; + /* This means the console is not initialized, or should get + * shutdown so as to allow for reuse of the usb device, which + * means it is time to shutdown the usb debug port. */ + ctrl = readl(&ehci_debug->control); + if (ctrl & DBGP_ENABLED) { + ctrl &= ~(DBGP_CLAIM); + writel(ctrl, &ehci_debug->control); + } + return 0; +} +EXPORT_SYMBOL_GPL(dbgp_reset_prep); diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 9f986b417c5..33351312327 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -124,7 +124,7 @@ choice config USB_GADGET_AT91 boolean "Atmel AT91 USB Device Port" - depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 + depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45 select USB_GADGET_SELECTED help Many Atmel AT91 processors (such as the AT91RM2000) have a @@ -143,7 +143,7 @@ config USB_AT91 config USB_GADGET_ATMEL_USBA boolean "Atmel USBA" select USB_GADGET_DUALSPEED - depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL + depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. @@ -627,9 +627,10 @@ config USB_AUDIO config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" depends on NET + select CRC32 help - This driver implements Ethernet style communication, in either - of two ways: + This driver implements Ethernet style communication, in one of + several ways: - The "Communication Device Class" (CDC) Ethernet Control Model. That protocol is often avoided with pure Ethernet adapters, in @@ -639,7 +640,11 @@ config USB_ETH - On hardware can't implement that protocol, a simple CDC subset is used, placing fewer demands on USB. - RNDIS support is a third option, more demanding than that subset. + - CDC Ethernet Emulation Model (EEM) is a newer standard that has + a simpler interface that can be used by more USB hardware. + + RNDIS support is an additional option, more demanding than than + subset. Within the USB device, this gadget driver exposes a network device "usbX", where X depends on what other networking devices you have. @@ -672,6 +677,22 @@ config USB_ETH_RNDIS XP, you'll need to download drivers from Microsoft's website; a URL is given in comments found in that info file. +config USB_ETH_EEM + bool "Ethernet Emulation Model (EEM) support" + depends on USB_ETH + default n + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". + config USB_GADGETFS tristate "Gadget Filesystem (EXPERIMENTAL)" depends on EXPERIMENTAL diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 77352ccc245..d5b65962dd3 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -2378,40 +2378,34 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) if (!ep->cancel_transfer && !list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct udc_request, queue); - if (req) { - /* - * length bytes transfered - * check dma done of last desc. in PPBDU mode - */ - if (use_dma_ppb_du) { - td = udc_get_last_dma_desc(req); - if (td) { - dma_done = - AMD_GETBITS(td->status, - UDC_DMA_IN_STS_BS); - /* don't care DMA done */ - req->req.actual = - req->req.length; - } - } else { - /* assume all bytes transferred */ + /* + * length bytes transfered + * check dma done of last desc. in PPBDU mode + */ + if (use_dma_ppb_du) { + td = udc_get_last_dma_desc(req); + if (td) { + dma_done = + AMD_GETBITS(td->status, + UDC_DMA_IN_STS_BS); + /* don't care DMA done */ req->req.actual = req->req.length; } + } else { + /* assume all bytes transferred */ + req->req.actual = req->req.length; + } - if (req->req.actual == req->req.length) { - /* complete req */ - complete_req(ep, req, 0); - req->dma_going = 0; - /* further request available ? */ - if (list_empty(&ep->queue)) { - /* disable interrupt */ - tmp = readl( - &dev->regs->ep_irqmsk); - tmp |= AMD_BIT(ep->num); - writel(tmp, - &dev->regs->ep_irqmsk); - } - + if (req->req.actual == req->req.length) { + /* complete req */ + complete_req(ep, req, 0); + req->dma_going = 0; + /* further request available ? */ + if (list_empty(&ep->queue)) { + /* disable interrupt */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); } } } diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 72bae8f39d8..66450a1abc2 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1754,7 +1754,6 @@ static int __init at91udc_probe(struct platform_device *pdev) IRQF_DISABLED, driver_name, udc)) { DBG("request vbus irq %d failed\n", udc->board.vbus_pin); - free_irq(udc->udp_irq, udc); retval = -EBUSY; goto fail3; } diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 9f80f4e970b..a3a0f4a27ef 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -106,20 +106,20 @@ static int audio_set_endpoint_req(struct usb_configuration *c, ctrl->bRequest, w_value, len, ep); switch (ctrl->bRequest) { - case SET_CUR: + case UAC_SET_CUR: value = 0; break; - case SET_MIN: + case UAC_SET_MIN: break; - case SET_MAX: + case UAC_SET_MAX: break; - case SET_RES: + case UAC_SET_RES: break; - case SET_MEM: + case UAC_SET_MEM: break; default: @@ -142,13 +142,13 @@ static int audio_get_endpoint_req(struct usb_configuration *c, ctrl->bRequest, w_value, len, ep); switch (ctrl->bRequest) { - case GET_CUR: - case GET_MIN: - case GET_MAX: - case GET_RES: + case UAC_GET_CUR: + case UAC_GET_MIN: + case UAC_GET_MAX: + case UAC_GET_RES: value = 3; break; - case GET_MEM: + case UAC_GET_MEM: break; default: break; @@ -171,11 +171,11 @@ audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl) * Audio class messages; interface activation uses set_alt(). */ switch (ctrl->bRequestType) { - case USB_AUDIO_SET_ENDPOINT: + case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT: value = audio_set_endpoint_req(c, ctrl); break; - case USB_AUDIO_GET_ENDPOINT: + case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT: value = audio_get_endpoint_req(c, ctrl); break; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 59e85234fa0..d05397ec8a1 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -602,7 +602,7 @@ static int get_string(struct usb_composite_dev *cdev, } } - for (len = 0; s->wData[len] && len <= 126; len++) + for (len = 0; len <= 126 && s->wData[len]; len++) continue; if (!len) return -EINVAL; diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a56b24d305f..5e096648518 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1306,11 +1306,6 @@ restart: setup = *(struct usb_ctrlrequest*) urb->setup_packet; w_index = le16_to_cpu(setup.wIndex); w_value = le16_to_cpu(setup.wValue); - if (le16_to_cpu(setup.wLength) != - urb->transfer_buffer_length) { - status = -EOVERFLOW; - goto return_urb; - } /* paranoia, in case of stale queued data */ list_for_each_entry (req, &ep->queue, queue) { diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index bd102f5052b..f37de283d0a 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -61,6 +61,11 @@ * simpler, Microsoft pushes their own approach: RNDIS. The published * RNDIS specs are ambiguous and appear to be incomplete, and are also * needlessly complex. They borrow more from CDC ACM than CDC ECM. + * + * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet + * interface to the target, CDC EEM was designed to use ethernet over the USB + * link between the host and target. CDC EEM is implemented as an alternative + * to those other protocols when that communication model is more appropriate */ #define DRIVER_DESC "Ethernet Gadget" @@ -114,6 +119,7 @@ static inline bool has_rndis(void) #include "f_rndis.c" #include "rndis.c" #endif +#include "f_eem.c" #include "u_ether.c" /*-------------------------------------------------------------------------*/ @@ -150,6 +156,10 @@ static inline bool has_rndis(void) #define RNDIS_VENDOR_NUM 0x0525 /* NetChip */ #define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */ +/* For EEM gadgets */ +#define EEM_VENDOR_NUM 0x0525 /* INVALID - NEEDS TO BE ALLOCATED */ +#define EEM_PRODUCT_NUM 0xa4a1 /* INVALID - NEEDS TO BE ALLOCATED */ + /*-------------------------------------------------------------------------*/ static struct usb_device_descriptor device_desc = { @@ -246,8 +256,16 @@ static struct usb_configuration rndis_config_driver = { /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_USB_ETH_EEM +static int use_eem = 1; +#else +static int use_eem; +#endif +module_param(use_eem, bool, 0); +MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); + /* - * We _always_ have an ECM or CDC Subset configuration. + * We _always_ have an ECM, CDC Subset, or EEM configuration. */ static int __init eth_do_config(struct usb_configuration *c) { @@ -258,7 +276,9 @@ static int __init eth_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - if (can_support_ecm(c->cdev->gadget)) + if (use_eem) + return eem_bind_config(c); + else if (can_support_ecm(c->cdev->gadget)) return ecm_bind_config(c, hostaddr); else return geth_bind_config(c, hostaddr); @@ -286,7 +306,12 @@ static int __init eth_bind(struct usb_composite_dev *cdev) return status; /* set up main config label and device descriptor */ - if (can_support_ecm(cdev->gadget)) { + if (use_eem) { + /* EEM */ + eth_config_driver.label = "CDC Ethernet (EEM)"; + device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM); + device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM); + } else if (can_support_ecm(cdev->gadget)) { /* ECM */ eth_config_driver.label = "CDC Ethernet (ECM)"; } else { diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 66527ba2d2e..98e9bb97729 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -28,6 +28,9 @@ static int audio_buf_size = 48000; module_param(audio_buf_size, int, S_IRUGO); MODULE_PARM_DESC(audio_buf_size, "Audio buffer size"); +static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value); +static int generic_get_cmd(struct usb_audio_control *con, u8 cmd); + /* * DESCRIPTORS ... most are static, but strings and full * configuration descriptors are built on demand. @@ -50,16 +53,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, }; -DECLARE_USB_AC_HEADER_DESCRIPTOR(2); +DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); -#define USB_DT_AC_HEADER_LENGH USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +#define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct usb_ac_header_descriptor_2 ac_header_desc = { - .bLength = USB_DT_AC_HEADER_LENGH, +static struct uac_ac_header_descriptor_2 ac_header_desc = { + .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = HEADER, + .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, @@ -68,33 +71,33 @@ static struct usb_ac_header_descriptor_2 ac_header_desc = { }; #define INPUT_TERMINAL_ID 1 -static struct usb_input_terminal_descriptor input_terminal_desc = { - .bLength = USB_DT_AC_INPUT_TERMINAL_SIZE, +static struct uac_input_terminal_descriptor input_terminal_desc = { + .bLength = UAC_DT_INPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = INPUT_TERMINAL, + .bDescriptorSubtype = UAC_INPUT_TERMINAL, .bTerminalID = INPUT_TERMINAL_ID, - .wTerminalType = USB_AC_TERMINAL_STREAMING, + .wTerminalType = UAC_TERMINAL_STREAMING, .bAssocTerminal = 0, .wChannelConfig = 0x3, }; -DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0); +DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(0); #define FEATURE_UNIT_ID 2 -static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = { - .bLength = USB_DT_AC_FEATURE_UNIT_SIZE(0), +static struct uac_feature_unit_descriptor_0 feature_unit_desc = { + .bLength = UAC_DT_FEATURE_UNIT_SIZE(0), .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = FEATURE_UNIT, + .bDescriptorSubtype = UAC_FEATURE_UNIT, .bUnitID = FEATURE_UNIT_ID, .bSourceID = INPUT_TERMINAL_ID, .bControlSize = 2, - .bmaControls[0] = (FU_MUTE | FU_VOLUME), + .bmaControls[0] = (UAC_FU_MUTE | UAC_FU_VOLUME), }; static struct usb_audio_control mute_control = { .list = LIST_HEAD_INIT(mute_control.list), .name = "Mute Control", - .type = MUTE_CONTROL, + .type = UAC_MUTE_CONTROL, /* Todo: add real Mute control code */ .set = generic_set_cmd, .get = generic_get_cmd, @@ -103,7 +106,7 @@ static struct usb_audio_control mute_control = { static struct usb_audio_control volume_control = { .list = LIST_HEAD_INIT(volume_control.list), .name = "Volume Control", - .type = VOLUME_CONTROL, + .type = UAC_VOLUME_CONTROL, /* Todo: add real Volume control code */ .set = generic_set_cmd, .get = generic_get_cmd, @@ -113,17 +116,17 @@ static struct usb_audio_control_selector feature_unit = { .list = LIST_HEAD_INIT(feature_unit.list), .id = FEATURE_UNIT_ID, .name = "Mute & Volume Control", - .type = FEATURE_UNIT, + .type = UAC_FEATURE_UNIT, .desc = (struct usb_descriptor_header *)&feature_unit_desc, }; #define OUTPUT_TERMINAL_ID 3 -static struct usb_output_terminal_descriptor output_terminal_desc = { - .bLength = USB_DT_AC_OUTPUT_TERMINAL_SIZE, +static struct uac_output_terminal_descriptor output_terminal_desc = { + .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = OUTPUT_TERMINAL, + .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, .bTerminalID = OUTPUT_TERMINAL_ID, - .wTerminalType = USB_AC_OUTPUT_TERMINAL_SPEAKER, + .wTerminalType = UAC_OUTPUT_TERMINAL_SPEAKER, .bAssocTerminal = FEATURE_UNIT_ID, .bSourceID = FEATURE_UNIT_ID, }; @@ -148,22 +151,22 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = { }; /* B.4.2 Class-Specific AS Interface Descriptor */ -static struct usb_as_header_descriptor as_header_desc = { - .bLength = USB_DT_AS_HEADER_SIZE, +static struct uac_as_header_descriptor as_header_desc = { + .bLength = UAC_DT_AS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = AS_GENERAL, + .bDescriptorSubtype = UAC_AS_GENERAL, .bTerminalLink = INPUT_TERMINAL_ID, .bDelay = 1, - .wFormatTag = USB_AS_AUDIO_FORMAT_TYPE_I_PCM, + .wFormatTag = UAC_FORMAT_TYPE_I_PCM, }; -DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1); +DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1); -static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = { - .bLength = USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1), +static struct uac_format_type_i_discrete_descriptor_1 as_type_i_desc = { + .bLength = UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = FORMAT_TYPE, - .bFormatType = USB_AS_FORMAT_TYPE_I, + .bDescriptorSubtype = UAC_FORMAT_TYPE, + .bFormatType = UAC_FORMAT_TYPE_I, .bSubframeSize = 2, .bBitResolution = 16, .bSamFreqType = 1, @@ -174,17 +177,17 @@ static struct usb_endpoint_descriptor as_out_ep_desc __initdata = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_AS_ENDPOINT_ADAPTIVE + .bmAttributes = USB_ENDPOINT_SYNC_ADAPTIVE | USB_ENDPOINT_XFER_ISOC, .wMaxPacketSize = __constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE), .bInterval = 4, }; /* Class-specific AS ISO OUT Endpoint Descriptor */ -static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = { - .bLength = USB_AS_ISO_ENDPOINT_DESC_SIZE, +static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = { + .bLength = UAC_ISO_ENDPOINT_DESC_SIZE, .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = EP_GENERAL, + .bDescriptorSubtype = UAC_EP_GENERAL, .bmAttributes = 1, .bLockDelayUnits = 1, .wLockDelay = __constant_cpu_to_le16(1), @@ -456,11 +459,11 @@ f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) * Audio class messages; interface activation uses set_alt(). */ switch (ctrl->bRequestType) { - case USB_AUDIO_SET_INTF: + case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE: value = audio_set_intf_req(f, ctrl); break; - case USB_AUDIO_GET_INTF: + case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE: value = audio_get_intf_req(f, ctrl); break; @@ -632,6 +635,18 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f) /*-------------------------------------------------------------------------*/ +static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) +{ + con->data[cmd] = value; + + return 0; +} + +static int generic_get_cmd(struct usb_audio_control *con, u8 cmd) +{ + return con->data[cmd]; +} + /* Todo: add more control selecotor dynamically */ int __init control_selector_init(struct f_audio *audio) { @@ -642,10 +657,10 @@ int __init control_selector_init(struct f_audio *audio) list_add(&mute_control.list, &feature_unit.control); list_add(&volume_control.list, &feature_unit.control); - volume_control.data[_CUR] = 0xffc0; - volume_control.data[_MIN] = 0xe3a0; - volume_control.data[_MAX] = 0xfff0; - volume_control.data[_RES] = 0x0030; + volume_control.data[UAC__CUR] = 0xffc0; + volume_control.data[UAC__MIN] = 0xe3a0; + volume_control.data[UAC__MAX] = 0xfff0; + volume_control.data[UAC__RES] = 0x0030; return 0; } diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c new file mode 100644 index 00000000000..0a577d5694f --- /dev/null +++ b/drivers/usb/gadget/f_eem.c @@ -0,0 +1,562 @@ +/* + * f_eem.c -- USB CDC Ethernet (EEM) link function driver + * + * Copyright (C) 2003-2005,2008 David Brownell + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2009 EF Johnson Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/etherdevice.h> +#include <linux/crc32.h> + +#include "u_ether.h" + +#define EEM_HLEN 2 + +/* + * This function is a "CDC Ethernet Emulation Model" (CDC EEM) + * Ethernet link. + */ + +struct eem_ep_descs { + struct usb_endpoint_descriptor *in; + struct usb_endpoint_descriptor *out; +}; + +struct f_eem { + struct gether port; + u8 ctrl_id; + + struct eem_ep_descs fs; + struct eem_ep_descs hs; +}; + +static inline struct f_eem *func_to_eem(struct usb_function *f) +{ + return container_of(f, struct f_eem, port.func); +} + +/*-------------------------------------------------------------------------*/ + +/* interface descriptor: */ + +static struct usb_interface_descriptor eem_intf __initdata = { + .bLength = sizeof eem_intf, + .bDescriptorType = USB_DT_INTERFACE, + + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_EEM, + .bInterfaceProtocol = USB_CDC_PROTO_EEM, + /* .iInterface = DYNAMIC */ +}; + +/* full speed support: */ + +static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_descriptor_header *eem_fs_function[] __initdata = { + /* CDC EEM control descriptors */ + (struct usb_descriptor_header *) &eem_intf, + (struct usb_descriptor_header *) &eem_fs_in_desc, + (struct usb_descriptor_header *) &eem_fs_out_desc, + NULL, +}; + +/* high speed support: */ + +static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_descriptor_header *eem_hs_function[] __initdata = { + /* CDC EEM control descriptors */ + (struct usb_descriptor_header *) &eem_intf, + (struct usb_descriptor_header *) &eem_hs_in_desc, + (struct usb_descriptor_header *) &eem_hs_out_desc, + NULL, +}; + +/* string descriptors: */ + +static struct usb_string eem_string_defs[] = { + [0].s = "CDC Ethernet Emulation Model (EEM)", + { } /* end of list */ +}; + +static struct usb_gadget_strings eem_string_table = { + .language = 0x0409, /* en-us */ + .strings = eem_string_defs, +}; + +static struct usb_gadget_strings *eem_strings[] = { + &eem_string_table, + NULL, +}; + +/*-------------------------------------------------------------------------*/ + +static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) +{ + struct usb_composite_dev *cdev = f->config->cdev; + int value = -EOPNOTSUPP; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + w_value, w_index, w_length); + + /* device either stalls (value < 0) or reports success */ + return value; +} + + +static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_eem *eem = func_to_eem(f); + struct usb_composite_dev *cdev = f->config->cdev; + struct net_device *net; + + /* we know alt == 0, so this is an activation or a reset */ + if (alt != 0) + goto fail; + + if (intf == eem->ctrl_id) { + + if (eem->port.in_ep->driver_data) { + DBG(cdev, "reset eem\n"); + gether_disconnect(&eem->port); + } + + if (!eem->port.in) { + DBG(cdev, "init eem\n"); + eem->port.in = ep_choose(cdev->gadget, + eem->hs.in, eem->fs.in); + eem->port.out = ep_choose(cdev->gadget, + eem->hs.out, eem->fs.out); + } + + /* zlps should not occur because zero-length EEM packets + * will be inserted in those cases where they would occur + */ + eem->port.is_zlp_ok = 1; + eem->port.cdc_filter = DEFAULT_FILTER; + DBG(cdev, "activate eem\n"); + net = gether_connect(&eem->port); + if (IS_ERR(net)) + return PTR_ERR(net); + } else + goto fail; + + return 0; +fail: + return -EINVAL; +} + +static void eem_disable(struct usb_function *f) +{ + struct f_eem *eem = func_to_eem(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "eem deactivated\n"); + + if (eem->port.in_ep->driver_data) + gether_disconnect(&eem->port); +} + +/*-------------------------------------------------------------------------*/ + +/* EEM function driver setup/binding */ + +static int __init +eem_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = c->cdev; + struct f_eem *eem = func_to_eem(f); + int status; + struct usb_ep *ep; + + /* allocate instance-specific interface IDs */ + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + eem->ctrl_id = status; + eem_intf.bInterfaceNumber = status; + + status = -ENODEV; + + /* allocate instance-specific endpoints */ + ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc); + if (!ep) + goto fail; + eem->port.in_ep = ep; + ep->driver_data = cdev; /* claim */ + + ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc); + if (!ep) + goto fail; + eem->port.out_ep = ep; + ep->driver_data = cdev; /* claim */ + + status = -ENOMEM; + + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(eem_fs_function); + if (!f->descriptors) + goto fail; + + eem->fs.in = usb_find_endpoint(eem_fs_function, + f->descriptors, &eem_fs_in_desc); + eem->fs.out = usb_find_endpoint(eem_fs_function, + f->descriptors, &eem_fs_out_desc); + + /* support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + eem_hs_in_desc.bEndpointAddress = + eem_fs_in_desc.bEndpointAddress; + eem_hs_out_desc.bEndpointAddress = + eem_fs_out_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->hs_descriptors = usb_copy_descriptors(eem_hs_function); + if (!f->hs_descriptors) + goto fail; + + eem->hs.in = usb_find_endpoint(eem_hs_function, + f->hs_descriptors, &eem_hs_in_desc); + eem->hs.out = usb_find_endpoint(eem_hs_function, + f->hs_descriptors, &eem_hs_out_desc); + } + + DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n", + gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", + eem->port.in_ep->name, eem->port.out_ep->name); + return 0; + +fail: + if (f->descriptors) + usb_free_descriptors(f->descriptors); + + /* we might as well release our claims on endpoints */ + if (eem->port.out) + eem->port.out_ep->driver_data = NULL; + if (eem->port.in) + eem->port.in_ep->driver_data = NULL; + + ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); + + return status; +} + +static void +eem_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_eem *eem = func_to_eem(f); + + DBG(c->cdev, "eem unbind\n"); + + if (gadget_is_dualspeed(c->cdev->gadget)) + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + kfree(eem); +} + +static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req) +{ +} + +/* + * Add the EEM header and ethernet checksum. + * We currently do not attempt to put multiple ethernet frames + * into a single USB transfer + */ +static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) +{ + struct sk_buff *skb2 = NULL; + struct usb_ep *in = port->in_ep; + int padlen = 0; + u16 len = skb->len; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0, + * stick two bytes of zero-length EEM packet on the end. + */ + if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0) + padlen += 2; + + if ((tailroom >= (ETH_FCS_LEN + padlen)) && + (headroom >= EEM_HLEN)) + goto done; + } + + skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return skb; + +done: + /* use the "no CRC" option */ + put_unaligned_be32(0xdeadbeef, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (0 == sentinel CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2)); + + /* add a zero-length EEM packet, if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +/* + * Remove the EEM header. Note that there can be many EEM packets in a single + * USB transfer, so we need to break them out and handle them independently. + */ +static int eem_unwrap(struct gether *port, + struct sk_buff *skb, + struct sk_buff_head *list) +{ + struct usb_composite_dev *cdev = port->func.config->cdev; + int status = 0; + + do { + struct sk_buff *skb2; + u16 header; + u16 len = 0; + + if (skb->len < EEM_HLEN) { + status = -EINVAL; + DBG(cdev, "invalid EEM header\n"); + goto error; + } + + /* remove the EEM header */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HLEN); + + /* EEM packet header format: + * b0..14: EEM type dependent (data or command) + * b15: bmType (0 == data, 1 == command) + */ + if (header & BIT(15)) { + struct usb_request *req = cdev->req; + u16 bmEEMCmd; + + /* EEM command packet format: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: reserved (must be zero) + * b15: bmType (1 == command) + */ + if (header & BIT(14)) + continue; + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + case 0: /* echo */ + len = header & 0x7FF; + if (skb->len < len) { + status = -EOVERFLOW; + goto error; + } + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) { + DBG(cdev, "EEM echo response error\n"); + goto next; + } + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | BIT(11) | len, + skb_push(skb2, 2)); + skb_copy_bits(skb, 0, req->buf, skb->len); + req->length = skb->len; + req->complete = eem_cmd_complete; + req->zero = 1; + if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC)) + DBG(cdev, "echo response queue fail\n"); + break; + + case 1: /* echo response */ + case 2: /* suspend hint */ + case 3: /* response hint */ + case 4: /* response complete hint */ + case 5: /* tickle */ + default: /* reserved */ + continue; + } + } else { + u32 crc, crc2; + struct sk_buff *skb3; + + /* check for zero-length EEM packet */ + if (header == 0) + continue; + + /* EEM data packet format: + * b0..13: length of ethernet frame + * b14: bmCRC (0 == sentinel, 1 == calculated) + * b15: bmType (0 == data) + */ + len = header & 0x3FFF; + if ((skb->len < len) + || (len < (ETH_HLEN + ETH_FCS_LEN))) { + status = -EINVAL; + goto error; + } + + /* validate CRC */ + crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); + if (header & BIT(14)) { + crc = get_unaligned_le32(skb->data + len + - ETH_FCS_LEN); + crc2 = ~crc32_le(~0, + skb->data, + skb->len - ETH_FCS_LEN); + } else { + crc = get_unaligned_be32(skb->data + len + - ETH_FCS_LEN); + crc2 = 0xdeadbeef; + } + if (crc != crc2) { + DBG(cdev, "invalid EEM CRC\n"); + goto next; + } + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) { + DBG(cdev, "unable to unframe EEM packet\n"); + continue; + } + skb_trim(skb2, len - ETH_FCS_LEN); + + skb3 = skb_copy_expand(skb2, + NET_IP_ALIGN, + 0, + GFP_ATOMIC); + if (unlikely(!skb3)) { + DBG(cdev, "unable to realign EEM packet\n"); + dev_kfree_skb_any(skb2); + continue; + } + dev_kfree_skb_any(skb2); + skb_queue_tail(list, skb3); + } +next: + skb_pull(skb, len); + } while (skb->len); + +error: + dev_kfree_skb_any(skb); + return status; +} + +/** + * eem_bind_config - add CDC Ethernet (EEM) network link to a configuration + * @c: the configuration to support the network link + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + * + * Caller must have called @gether_setup(). Caller is also responsible + * for calling @gether_cleanup() before module unload. + */ +int __init eem_bind_config(struct usb_configuration *c) +{ + struct f_eem *eem; + int status; + + /* maybe allocate device-global string IDs */ + if (eem_string_defs[0].id == 0) { + + /* control interface label */ + status = usb_string_id(c->cdev); + if (status < 0) + return status; + eem_string_defs[0].id = status; + eem_intf.iInterface = status; + } + + /* allocate and initialize one new instance */ + eem = kzalloc(sizeof *eem, GFP_KERNEL); + if (!eem) + return -ENOMEM; + + eem->port.cdc_filter = DEFAULT_FILTER; + + eem->port.func.name = "cdc_eem"; + eem->port.func.strings = eem_strings; + /* descriptors are per-instance copies */ + eem->port.func.bind = eem_bind; + eem->port.func.unbind = eem_unbind; + eem->port.func.set_alt = eem_set_alt; + eem->port.func.setup = eem_setup; + eem->port.func.disable = eem_disable; + eem->port.wrap = eem_wrap; + eem->port.unwrap = eem_unwrap; + eem->port.header_len = EEM_HLEN; + + status = usb_add_function(c, &eem->port.func); + if (status) + kfree(eem); + return status; +} + diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index eb6ddfc2085..6cb29d3df57 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -22,7 +22,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 46d6266f30e..b4a3ba654ea 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -24,7 +24,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "u_serial.h" diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 424a37c5773..c9966cc07d3 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -286,12 +286,17 @@ static struct usb_gadget_strings *rndis_strings[] = { /*-------------------------------------------------------------------------*/ -static struct sk_buff *rndis_add_header(struct sk_buff *skb) +static struct sk_buff *rndis_add_header(struct gether *port, + struct sk_buff *skb) { - skb = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); - if (skb) - rndis_add_hdr(skb); - return skb; + struct sk_buff *skb2; + + skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); + if (skb2) + rndis_add_hdr(skb2); + + dev_kfree_skb_any(skb); + return skb2; } static void rndis_response_available(void *_rndis) diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index bffe91d525f..09cba273d2d 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -22,7 +22,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include "g_zero.h" diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index d701bf4698d..7881f12413c 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2751,6 +2751,10 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) /*-------------------------------------------------------------------------*/ static struct of_device_id __devinitdata qe_udc_match[] = { { + .compatible = "fsl,mpc8323-qe-usb", + .data = (void *)PORT_QE, + }, + { .compatible = "fsl,mpc8360-qe-usb", .data = (void *)PORT_QE, }, diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index b9312dc6e04..d0b1e836f0e 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -191,7 +191,7 @@ module_param(qlen, uint, S_IRUGO); #define GMIDI_MS_INTERFACE 1 #define GMIDI_NUM_INTERFACES 2 -DECLARE_USB_AC_HEADER_DESCRIPTOR(1); +DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); @@ -237,12 +237,12 @@ static const struct usb_interface_descriptor ac_interface_desc = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct usb_ac_header_descriptor_1 ac_header_desc = { - .bLength = USB_DT_AC_HEADER_SIZE(1), +static const struct uac_ac_header_descriptor_1 ac_header_desc = { + .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, .bcdADC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)), + .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), .bInCollection = 1, .baInterfaceNr = { [0] = GMIDI_MS_INTERFACE, diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 7d33f50b587..c44367fea18 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -2033,7 +2033,7 @@ gadgetfs_create_file (struct super_block *sb, char const *name, return inode; } -static struct super_operations gadget_fs_operations = { +static const struct super_operations gadget_fs_operations = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, }; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index ed21e263f83..e6fedbd5a65 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -56,6 +56,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/otg.h> /* * This driver is PXA25x only. Grab the right register definitions. @@ -1008,15 +1009,27 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active) return 0; } +/* boards may consume current from VBUS, up to 100-500mA based on config. + * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs + * violate USB specs. + */ +static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) +{ + struct pxa25x_udc *udc; + + udc = container_of(_gadget, struct pxa25x_udc, gadget); + + if (udc->transceiver) + return otg_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + static const struct usb_gadget_ops pxa25x_udc_ops = { .get_frame = pxa25x_udc_get_frame, .wakeup = pxa25x_udc_wakeup, .vbus_session = pxa25x_udc_vbus_session, .pullup = pxa25x_udc_pullup, - - // .vbus_draw ... boards may consume current from VBUS, up to - // 100-500mA based on config. the 500uA suspend ceiling means - // that exclusively vbus-powered PXA designs violate USB specs. + .vbus_draw = pxa25x_udc_vbus_draw, }; /*-------------------------------------------------------------------------*/ @@ -1303,9 +1316,23 @@ fail: * for set_configuration as well as eventual disconnect. */ DMSG("registered gadget driver '%s'\n", driver->driver.name); + + /* connect to bus through transceiver */ + if (dev->transceiver) { + retval = otg_set_peripheral(dev->transceiver, &dev->gadget); + if (retval) { + DMSG("can't bind to transceiver\n"); + if (driver->unbind) + driver->unbind(&dev->gadget); + goto bind_fail; + } + } + pullup(dev); dump_state(dev); return 0; +bind_fail: + return retval; } EXPORT_SYMBOL(usb_gadget_register_driver); @@ -1351,6 +1378,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) stop_activity(dev, driver); local_irq_enable(); + if (dev->transceiver) + (void) otg_set_peripheral(dev->transceiver, NULL); + driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -2162,6 +2192,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; + dev->transceiver = otg_get_transceiver(); + if (gpio_is_valid(dev->mach->gpio_vbus)) { if ((retval = gpio_request(dev->mach->gpio_vbus, "pxa25x_udc GPIO VBUS"))) { @@ -2264,6 +2296,10 @@ lubbock_fail0: if (gpio_is_valid(dev->mach->gpio_vbus)) gpio_free(dev->mach->gpio_vbus); err_gpio_vbus: + if (dev->transceiver) { + otg_put_transceiver(dev->transceiver); + dev->transceiver = NULL; + } clk_put(dev->clk); err_clk: return retval; @@ -2305,6 +2341,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) clk_put(dev->clk); + if (dev->transceiver) { + otg_put_transceiver(dev->transceiver); + dev->transceiver = NULL; + } + platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index 1d51aa21e6e..f572c561746 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -128,6 +128,7 @@ struct pxa25x_udc { struct device *dev; struct clk *clk; struct pxa2xx_udc_mach_info *mach; + struct otg_transceiver *transceiver; u64 dma_mask; struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS]; diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index ca41b0b5afb..48267bc0b2e 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -1022,22 +1022,29 @@ static rndis_resp_t *rndis_add_response (int configNr, u32 length) return r; } -int rndis_rm_hdr(struct sk_buff *skb) +int rndis_rm_hdr(struct gether *port, + struct sk_buff *skb, + struct sk_buff_head *list) { /* tmp points to a struct rndis_packet_msg_type */ __le32 *tmp = (void *) skb->data; /* MessageType, MessageLength */ if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG) - != get_unaligned(tmp++)) + != get_unaligned(tmp++)) { + dev_kfree_skb_any(skb); return -EINVAL; + } tmp++; /* DataOffset, DataLength */ - if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) + if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) { + dev_kfree_skb_any(skb); return -EOVERFLOW; + } skb_trim(skb, get_unaligned_le32(tmp++)); + skb_queue_tail(list, skb); return 0; } diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h index aac61dfe0f0..c236aaa9dcd 100644 --- a/drivers/usb/gadget/rndis.h +++ b/drivers/usb/gadget/rndis.h @@ -251,7 +251,8 @@ int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr); int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed); void rndis_add_hdr (struct sk_buff *skb); -int rndis_rm_hdr (struct sk_buff *skb); +int rndis_rm_hdr(struct gether *port, struct sk_buff *skb, + struct sk_buff_head *list); u8 *rndis_get_next_response (int configNr, u32 *length); void rndis_free_response (int configNr, u8 *buf); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 50c71aae2cc..4b5dbd0127f 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2392,7 +2392,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg) grstctl = readl(hsotg->regs + S3C_GRSTCTL); } while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0); - if (!grstctl & S3C_GRSTCTL_CSftRst) { + if (!(grstctl & S3C_GRSTCTL_CSftRst)) { dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); return -EINVAL; } @@ -2514,8 +2514,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) * DMA mode we may need this. */ writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk | S3C_DOEPMSK_EPDisbldMsk | - using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | - S3C_DIEPMSK_TimeOUTMsk) : 0, + (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk | + S3C_DIEPMSK_TimeOUTMsk) : 0), hsotg->regs + S3C_DOEPMSK); writel(0, hsotg->regs + S3C_DAINTMSK); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index a9b452fe622..d5f4c1d45c9 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1703,8 +1703,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n", driver->driver.name); - if (driver->disconnect) - driver->disconnect(&udc->gadget); + driver->unbind(&udc->gadget); device_del(&udc->gadget.dev); udc->driver = NULL; diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index 0f3d22fc030..8252595d619 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -10,7 +10,6 @@ */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/delay.h> #include <linux/ctype.h> @@ -253,11 +252,13 @@ static int gaudio_open_snd_dev(struct gaudio *card) snd->filp = filp_open(fn_cap, O_RDONLY, 0); if (IS_ERR(snd->filp)) { ERROR(card, "No such PCM capture device: %s\n", fn_cap); - snd->filp = NULL; + snd->substream = NULL; + snd->card = NULL; + } else { + pcm_file = snd->filp->private_data; + snd->substream = pcm_file->substream; + snd->card = card; } - pcm_file = snd->filp->private_data; - snd->substream = pcm_file->substream; - snd->card = card; return 0; } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index c6652195391..2fc02bd9584 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -23,7 +23,6 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> -#include <linux/utsname.h> #include <linux/device.h> #include <linux/ctype.h> #include <linux/etherdevice.h> @@ -37,8 +36,9 @@ * one (!) network link through the USB gadget stack, normally "usb0". * * The control and data models are handled by the function driver which - * connects to this code; such as CDC Ethernet, "CDC Subset", or RNDIS. - * That includes all descriptor and endpoint management. + * connects to this code; such as CDC Ethernet (ECM or EEM), + * "CDC Subset", or RNDIS. That includes all descriptor and endpoint + * management. * * Link level addressing is handled by this component using module * parameters; if no such parameters are provided, random link level @@ -68,9 +68,13 @@ struct eth_dev { struct list_head tx_reqs, rx_reqs; atomic_t tx_qlen; + struct sk_buff_head rx_frames; + unsigned header_len; - struct sk_buff *(*wrap)(struct sk_buff *skb); - int (*unwrap)(struct sk_buff *skb); + struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb); + int (*unwrap)(struct gether *, + struct sk_buff *skb, + struct sk_buff_head *list); struct work_struct work; @@ -269,7 +273,7 @@ enomem: static void rx_complete(struct usb_ep *ep, struct usb_request *req) { - struct sk_buff *skb = req->context; + struct sk_buff *skb = req->context, *skb2; struct eth_dev *dev = ep->driver_data; int status = req->status; @@ -278,26 +282,47 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) /* normal completion */ case 0: skb_put(skb, req->actual); - if (dev->unwrap) - status = dev->unwrap(skb); - if (status < 0 - || ETH_HLEN > skb->len - || skb->len > ETH_FRAME_LEN) { - dev->net->stats.rx_errors++; - dev->net->stats.rx_length_errors++; - DBG(dev, "rx length %d\n", skb->len); - break; - } - skb->protocol = eth_type_trans(skb, dev->net); - dev->net->stats.rx_packets++; - dev->net->stats.rx_bytes += skb->len; + if (dev->unwrap) { + unsigned long flags; - /* no buffer copies needed, unless hardware can't - * use skb buffers. - */ - status = netif_rx(skb); + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) { + status = dev->unwrap(dev->port_usb, + skb, + &dev->rx_frames); + } else { + dev_kfree_skb_any(skb); + status = -ENOTCONN; + } + spin_unlock_irqrestore(&dev->lock, flags); + } else { + skb_queue_tail(&dev->rx_frames, skb); + } skb = NULL; + + skb2 = skb_dequeue(&dev->rx_frames); + while (skb2) { + if (status < 0 + || ETH_HLEN > skb2->len + || skb2->len > ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb2->len); + dev_kfree_skb_any(skb2); + goto next_frame; + } + skb2->protocol = eth_type_trans(skb2, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb2->len; + + /* no buffer copies needed, unless hardware can't + * use skb buffers. + */ + status = netif_rx(skb2); +next_frame: + skb2 = skb_dequeue(&dev->rx_frames); + } break; /* software-driven interface shutdown */ @@ -537,14 +562,15 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, * or there's not enough space for extra headers we need */ if (dev->wrap) { - struct sk_buff *skb_new; + unsigned long flags; - skb_new = dev->wrap(skb); - if (!skb_new) + spin_lock_irqsave(&dev->lock, flags); + if (dev->port_usb) + skb = dev->wrap(dev->port_usb, skb); + spin_unlock_irqrestore(&dev->lock, flags); + if (!skb) goto drop; - dev_kfree_skb_any(skb); - skb = skb_new; length = skb->len; } req->buf = skb->data; @@ -578,9 +604,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, } if (retval) { + dev_kfree_skb_any(skb); drop: dev->net->stats.tx_dropped++; - dev_kfree_skb_any(skb); spin_lock_irqsave(&dev->req_lock, flags); if (list_empty(&dev->tx_reqs)) netif_start_queue(net); @@ -753,6 +779,8 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) INIT_LIST_HEAD(&dev->tx_reqs); INIT_LIST_HEAD(&dev->rx_reqs); + skb_queue_head_init(&dev->rx_frames); + /* network device setup */ dev->net = net; strcpy(net->name, "usb%d"); diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index 0d1f7ae3b07..91b39ffdf6e 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -60,12 +60,13 @@ struct gether { u16 cdc_filter; - /* hooks for added framing, as needed for RNDIS and EEM. - * we currently don't support multiple frames per SKB. - */ + /* hooks for added framing, as needed for RNDIS and EEM. */ u32 header_len; - struct sk_buff *(*wrap)(struct sk_buff *skb); - int (*unwrap)(struct sk_buff *skb); + struct sk_buff *(*wrap)(struct gether *port, + struct sk_buff *skb); + int (*unwrap)(struct gether *port, + struct sk_buff *skb, + struct sk_buff_head *list); /* called on network open/close */ void (*open)(struct gether *); @@ -109,6 +110,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget) /* each configuration may bind one instance of an ethernet link */ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +int eem_bind_config(struct usb_configuration *c); #ifdef CONFIG_USB_ETH_RNDIS diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index fc6e709f45b..adf8260c3a6 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -1114,7 +1114,6 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count) /* export the driver ... */ status = tty_register_driver(gs_tty_driver); if (status) { - put_tty_driver(gs_tty_driver); pr_err("%s: cannot register, err %d\n", __func__, status); goto fail; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f21ca7d27a4..9b43b226817 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -113,6 +113,12 @@ config USB_EHCI_HCD_PPC_OF Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. +config USB_W90X900_EHCI + bool "W90X900(W90P910) EHCI support" + depends on USB_EHCI_HCD && ARCH_W90X900 + ---help--- + Enables support for the W90X900 USB controller + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" depends on USB @@ -153,6 +159,18 @@ config USB_ISP1760_HCD To compile this driver as a module, choose M here: the module will be called isp1760. +config USB_ISP1362_HCD + tristate "ISP1362 HCD support" + depends on USB + default N + ---help--- + Supports the Philips ISP1362 chip as a host controller + + This driver does not support isochronous transfers. + + To compile this driver as a module, choose M here: the + module will be called isp1362-hcd. + config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 289d748bb41..f58b2494c44 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o +obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c new file mode 100644 index 00000000000..87c1b7c34c0 --- /dev/null +++ b/drivers/usb/host/ehci-atmel.c @@ -0,0 +1,230 @@ +/* + * Driver for EHCI UHP on Atmel chips + * + * Copyright (C) 2009 Atmel Corporation, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> + +/* interface and function clocks */ +static struct clk *iclk, *fclk; +static int clocked; + +/*-------------------------------------------------------------------------*/ + +static void atmel_start_clock(void) +{ + clk_enable(iclk); + clk_enable(fclk); + clocked = 1; +} + +static void atmel_stop_clock(void) +{ + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; +} + +static void atmel_start_ehci(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "start\n"); + atmel_start_clock(); +} + +static void atmel_stop_ehci(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "stop\n"); + atmel_stop_clock(); +} + +/*-------------------------------------------------------------------------*/ + +static int ehci_atmel_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval = 0; + + /* registers start at offset 0x0 */ + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + + ehci_reset(ehci); + ehci_port_power(ehci, 0); + + return retval; +} + +static const struct hc_driver ehci_atmel_hc_driver = { + .description = hcd_name, + .product_desc = "Atmel EHCI UHP HS", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* generic hardware linkage */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* basic lifecycle operations */ + .reset = ehci_atmel_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = ehci_get_frame, + + /* root hub support */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int __init ehci_atmel_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + const struct hc_driver *driver = &ehci_atmel_hc_driver; + struct resource *res; + int irq; + int retval; + + if (usb_disabled()) + return -ENODEV; + + pr_debug("Initializing Atmel-SoC USB Host Controller\n"); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + retval = -ENODEV; + goto fail_create_hcd; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto fail_create_hcd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + retval = -ENODEV; + goto fail_request_resource; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto fail_request_resource; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto fail_ioremap; + } + + iclk = clk_get(&pdev->dev, "ehci_clk"); + if (IS_ERR(iclk)) { + dev_err(&pdev->dev, "Error getting interface clock\n"); + retval = -ENOENT; + goto fail_get_iclk; + } + fclk = clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(fclk)) { + dev_err(&pdev->dev, "Error getting function clock\n"); + retval = -ENOENT; + goto fail_get_fclk; + } + + atmel_start_ehci(pdev); + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval) + goto fail_add_hcd; + + return retval; + +fail_add_hcd: + atmel_stop_ehci(pdev); + clk_put(fclk); +fail_get_fclk: + clk_put(iclk); +fail_get_iclk: + iounmap(hcd->regs); +fail_ioremap: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +fail_request_resource: + usb_put_hcd(hcd); +fail_create_hcd: + dev_err(&pdev->dev, "init %s fail, %d\n", + dev_name(&pdev->dev), retval); + + return retval; +} + +static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + ehci_shutdown(hcd); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + atmel_stop_ehci(pdev); + clk_put(fclk); + clk_put(iclk); + fclk = iclk = NULL; + + return 0; +} + +static struct platform_driver ehci_atmel_driver = { + .probe = ehci_atmel_drv_probe, + .remove = __exit_p(ehci_atmel_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "atmel-ehci", +}; diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 59d208d94d4..ed77be76d6b 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -199,10 +199,9 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev, - pm_message_t message) +static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned long flags; int rc; @@ -229,12 +228,6 @@ static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev, ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); - /* make sure snapshot being resumed re-enumerates everything */ - if (message.event == PM_EVENT_PRETHAW) { - ehci_halt(ehci); - ehci_reset(ehci); - } - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); au1xxx_stop_ehc(); @@ -248,10 +241,9 @@ bail: return rc; } - -static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev) +static int ehci_hcd_au1xxx_drv_resume(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct ehci_hcd *ehci = hcd_to_ehci(hcd); au1xxx_start_ehc(); @@ -305,20 +297,25 @@ static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev) return 0; } +static struct dev_pm_ops au1xxx_ehci_pmops = { + .suspend = ehci_hcd_au1xxx_drv_suspend, + .resume = ehci_hcd_au1xxx_drv_resume, +}; + +#define AU1XXX_EHCI_PMOPS &au1xxx_ehci_pmops + #else -#define ehci_hcd_au1xxx_drv_suspend NULL -#define ehci_hcd_au1xxx_drv_resume NULL +#define AU1XXX_EHCI_PMOPS NULL #endif static struct platform_driver ehci_hcd_au1xxx_driver = { .probe = ehci_hcd_au1xxx_drv_probe, .remove = ehci_hcd_au1xxx_drv_remove, .shutdown = usb_hcd_platform_shutdown, - .suspend = ehci_hcd_au1xxx_drv_suspend, - .resume = ehci_hcd_au1xxx_drv_resume, .driver = { .name = "au1xxx-ehci", .owner = THIS_MODULE, + .pm = AU1XXX_EHCI_PMOPS, } }; diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 7f4ace73d44..874d2000bf9 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -134,10 +134,11 @@ dbg_qtd (const char *label, struct ehci_hcd *ehci, struct ehci_qtd *qtd) static void __maybe_unused dbg_qh (const char *label, struct ehci_hcd *ehci, struct ehci_qh *qh) { + struct ehci_qh_hw *hw = qh->hw; + ehci_dbg (ehci, "%s qh %p n%08x info %x %x qtd %x\n", label, - qh, qh->hw_next, qh->hw_info1, qh->hw_info2, - qh->hw_current); - dbg_qtd ("overlay", ehci, (struct ehci_qtd *) &qh->hw_qtd_next); + qh, hw->hw_next, hw->hw_info1, hw->hw_info2, hw->hw_current); + dbg_qtd("overlay", ehci, (struct ehci_qtd *) &hw->hw_qtd_next); } static void __maybe_unused @@ -400,31 +401,32 @@ static void qh_lines ( char *next = *nextp; char mark; __le32 list_end = EHCI_LIST_END(ehci); + struct ehci_qh_hw *hw = qh->hw; - if (qh->hw_qtd_next == list_end) /* NEC does this */ + if (hw->hw_qtd_next == list_end) /* NEC does this */ mark = '@'; else - mark = token_mark(ehci, qh->hw_token); + mark = token_mark(ehci, hw->hw_token); if (mark == '/') { /* qh_alt_next controls qh advance? */ - if ((qh->hw_alt_next & QTD_MASK(ehci)) - == ehci->async->hw_alt_next) + if ((hw->hw_alt_next & QTD_MASK(ehci)) + == ehci->async->hw->hw_alt_next) mark = '#'; /* blocked */ - else if (qh->hw_alt_next == list_end) + else if (hw->hw_alt_next == list_end) mark = '.'; /* use hw_qtd_next */ /* else alt_next points to some other qtd */ } - scratch = hc32_to_cpup(ehci, &qh->hw_info1); - hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &qh->hw_current) : 0; + scratch = hc32_to_cpup(ehci, &hw->hw_info1); + hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &hw->hw_current) : 0; temp = scnprintf (next, size, "qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)", qh, scratch & 0x007f, speed_char (scratch), (scratch >> 8) & 0x000f, - scratch, hc32_to_cpup(ehci, &qh->hw_info2), - hc32_to_cpup(ehci, &qh->hw_token), mark, - (cpu_to_hc32(ehci, QTD_TOGGLE) & qh->hw_token) + scratch, hc32_to_cpup(ehci, &hw->hw_info2), + hc32_to_cpup(ehci, &hw->hw_token), mark, + (cpu_to_hc32(ehci, QTD_TOGGLE) & hw->hw_token) ? "data1" : "data0", - (hc32_to_cpup(ehci, &qh->hw_alt_next) >> 1) & 0x0f); + (hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f); size -= temp; next += temp; @@ -435,10 +437,10 @@ static void qh_lines ( mark = ' '; if (hw_curr == td->qtd_dma) mark = '*'; - else if (qh->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma)) + else if (hw->hw_qtd_next == cpu_to_hc32(ehci, td->qtd_dma)) mark = '+'; else if (QTD_LENGTH (scratch)) { - if (td->hw_alt_next == ehci->async->hw_alt_next) + if (td->hw_alt_next == ehci->async->hw->hw_alt_next) mark = '#'; else if (td->hw_alt_next != list_end) mark = '/'; @@ -550,12 +552,15 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) next += temp; do { + struct ehci_qh_hw *hw; + switch (hc32_to_cpu(ehci, tag)) { case Q_TYPE_QH: + hw = p.qh->hw; temp = scnprintf (next, size, " qh%d-%04x/%p", p.qh->period, hc32_to_cpup(ehci, - &p.qh->hw_info2) + &hw->hw_info2) /* uframe masks */ & (QH_CMASK | QH_SMASK), p.qh); @@ -576,7 +581,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) /* show more info the first time around */ if (temp == seen_count) { u32 scratch = hc32_to_cpup(ehci, - &p.qh->hw_info1); + &hw->hw_info1); struct ehci_qtd *qtd; char *type = ""; @@ -609,7 +614,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf) } else temp = 0; if (p.qh) { - tag = Q_NEXT_TYPE(ehci, p.qh->hw_next); + tag = Q_NEXT_TYPE(ehci, hw->hw_next); p = p.qh->qh_next; } break; @@ -879,8 +884,7 @@ static int debug_close(struct inode *inode, struct file *file) struct debug_buffer *buf = file->private_data; if (buf) { - if (buf->output_buf) - vfree(buf->output_buf); + vfree(buf->output_buf); kfree(buf); } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 11c627ce602..9835e071394 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -30,7 +30,6 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/interrupt.h> -#include <linux/reboot.h> #include <linux/usb.h> #include <linux/moduleparam.h> #include <linux/dma-mapping.h> @@ -127,6 +126,8 @@ timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action) switch (action) { case TIMER_IO_WATCHDOG: + if (!ehci->need_io_watchdog) + return; t = EHCI_IO_JIFFIES; break; case TIMER_ASYNC_OFF: @@ -239,6 +240,11 @@ static int ehci_reset (struct ehci_hcd *ehci) int retval; u32 command = ehci_readl(ehci, &ehci->regs->command); + /* If the EHCI debug controller is active, special care must be + * taken before and after a host controller reset */ + if (ehci->debug && !dbgp_reset_prep()) + ehci->debug = NULL; + command |= CMD_RESET; dbg_cmd (ehci, "reset", command); ehci_writel(ehci, command, &ehci->regs->command); @@ -247,12 +253,21 @@ static int ehci_reset (struct ehci_hcd *ehci) retval = handshake (ehci, &ehci->regs->command, CMD_RESET, 0, 250 * 1000); + if (ehci->has_hostpc) { + ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, + (u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX)); + ehci_writel(ehci, TXFIFO_DEFAULT, + (u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING)); + } if (retval) return retval; if (ehci_is_TDI(ehci)) tdi_reset (ehci); + if (ehci->debug) + dbgp_external_startup(); + return retval; } @@ -505,9 +520,14 @@ static int ehci_init(struct usb_hcd *hcd) u32 temp; int retval; u32 hcc_params; + struct ehci_qh_hw *hw; spin_lock_init(&ehci->lock); + /* + * keep io watchdog by default, those good HCDs could turn off it later + */ + ehci->need_io_watchdog = 1; init_timer(&ehci->watchdog); ehci->watchdog.function = ehci_watchdog; ehci->watchdog.data = (unsigned long) ehci; @@ -544,12 +564,13 @@ static int ehci_init(struct usb_hcd *hcd) * from automatically advancing to the next td after short reads. */ ehci->async->qh_next.qh = NULL; - ehci->async->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); - ehci->async->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); - ehci->async->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); - ehci->async->hw_qtd_next = EHCI_LIST_END(ehci); + hw = ehci->async->hw; + hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); + hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); + hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); + hw->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; - ehci->async->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma); + hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma); /* clear interrupt enables, set irq latency */ if (log2_irq_thresh < 0 || log2_irq_thresh > 6) @@ -850,12 +871,18 @@ static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim) end_unlink_async(ehci); - /* if it's not linked then there's nothing to do */ - if (qh->qh_state != QH_STATE_LINKED) - ; + /* If the QH isn't linked then there's nothing we can do + * unless we were called during a giveback, in which case + * qh_completions() has to deal with it. + */ + if (qh->qh_state != QH_STATE_LINKED) { + if (qh->qh_state == QH_STATE_COMPLETING) + qh->needs_rescan = 1; + return; + } /* defer till later if busy */ - else if (ehci->reclaim) { + if (ehci->reclaim) { struct ehci_qh *last; for (last = ehci->reclaim; @@ -915,8 +942,9 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) break; switch (qh->qh_state) { case QH_STATE_LINKED: + case QH_STATE_COMPLETING: intr_deschedule (ehci, qh); - /* FALL THROUGH */ + break; case QH_STATE_IDLE: qh_completions (ehci, qh); break; @@ -925,23 +953,6 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh, qh->qh_state); goto done; } - - /* reschedule QH iff another request is queued */ - if (!list_empty (&qh->qtd_list) - && HC_IS_RUNNING (hcd->state)) { - rc = qh_schedule(ehci, qh); - - /* An error here likely indicates handshake failure - * or no space left in the schedule. Neither fault - * should happen often ... - * - * FIXME kill the now-dysfunctional queued urbs - */ - if (rc != 0) - ehci_err(ehci, - "can't reschedule qh %p, err %d", - qh, rc); - } break; case PIPE_ISOCHRONOUS: @@ -979,7 +990,7 @@ rescan: /* endpoints can be iso streams. for now, we don't * accelerate iso completions ... so spin a while. */ - if (qh->hw_info1 == 0) { + if (qh->hw->hw_info1 == 0) { ehci_vdbg (ehci, "iso delay\n"); goto idle_timeout; } @@ -988,6 +999,7 @@ rescan: qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: + case QH_STATE_COMPLETING: for (tmp = ehci->async->qh_next.qh; tmp && tmp != qh; tmp = tmp->qh_next.qh) @@ -1052,18 +1064,17 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) usb_settoggle(qh->dev, epnum, is_out, 0); if (!list_empty(&qh->qtd_list)) { WARN_ONCE(1, "clear_halt for a busy endpoint\n"); - } else if (qh->qh_state == QH_STATE_LINKED) { + } else if (qh->qh_state == QH_STATE_LINKED || + qh->qh_state == QH_STATE_COMPLETING) { /* The toggle value in the QH can't be updated * while the QH is active. Unlink it now; * re-linking will call qh_refresh(). */ - if (eptype == USB_ENDPOINT_XFER_BULK) { + if (eptype == USB_ENDPOINT_XFER_BULK) unlink_async(ehci, qh); - } else { + else intr_deschedule(ehci, qh); - (void) qh_schedule(ehci, qh); - } } } spin_unlock_irqrestore(&ehci->lock, flags); @@ -1117,6 +1128,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ixp4xx_ehci_driver #endif +#ifdef CONFIG_USB_W90X900_EHCI +#include "ehci-w90x900.c" +#define PLATFORM_DRIVER ehci_hcd_w90x900_driver +#endif + +#ifdef CONFIG_ARCH_AT91 +#include "ehci-atmel.c" +#define PLATFORM_DRIVER ehci_atmel_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) #error "missing bus glue for ehci-hcd" diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index f46ad27c9a9..1b6f1c0e5ce 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -111,6 +111,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); int port; int mask; + u32 __iomem *hostpc_reg = NULL; ehci_dbg(ehci, "suspend root hub\n"); @@ -142,6 +143,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; u32 t2 = t1; + if (ehci->has_hostpc) + hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs + + HOSTPC0 + 4 * (port & 0xff)); /* keep track of which ports we suspend */ if (t1 & PORT_OWNER) set_bit(port, &ehci->owned_ports); @@ -151,15 +155,37 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } /* enable remote wakeup on all ports */ - if (hcd->self.root_hub->do_remote_wakeup) - t2 |= PORT_WAKE_BITS; - else + if (hcd->self.root_hub->do_remote_wakeup) { + /* only enable appropriate wake bits, otherwise the + * hardware can not go phy low power mode. If a race + * condition happens here(connection change during bits + * set), the port change detection will finally fix it. + */ + if (t1 & PORT_CONNECT) { + t2 |= PORT_WKOC_E | PORT_WKDISC_E; + t2 &= ~PORT_WKCONN_E; + } else { + t2 |= PORT_WKOC_E | PORT_WKCONN_E; + t2 &= ~PORT_WKDISC_E; + } + } else t2 &= ~PORT_WAKE_BITS; if (t1 != t2) { ehci_vdbg (ehci, "port %d, %08x -> %08x\n", port + 1, t1, t2); ehci_writel(ehci, t2, reg); + if (hostpc_reg) { + u32 t3; + + msleep(5);/* 5ms for HCD enter low pwr mode */ + t3 = ehci_readl(ehci, hostpc_reg); + ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); + t3 = ehci_readl(ehci, hostpc_reg); + ehci_dbg(ehci, "Port%d phy low pwr mode %s\n", + port, (t3 & HOSTPC_PHCD) ? + "succeeded" : "failed"); + } } } @@ -183,6 +209,11 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irq (&ehci->lock); + + /* ehci_work() may have re-enabled the watchdog timer, which we do not + * want, and so we must delete any pending watchdog timer events. + */ + del_timer_sync(&ehci->watchdog); return 0; } @@ -204,6 +235,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd) return -ESHUTDOWN; } + if (unlikely(ehci->debug)) { + if (ehci->debug && !dbgp_reset_prep()) + ehci->debug = NULL; + else + dbgp_external_startup(); + } + /* Ideally and we've got a real resume here, and no port's power * was lost. (For PCI, that means Vaux was maintained.) But we * could instead be restoring a swsusp snapshot -- so that BIOS was @@ -563,7 +601,8 @@ static int ehci_hub_control ( int ports = HCS_N_PORTS (ehci->hcs_params); u32 __iomem *status_reg = &ehci->regs->port_status[ (wIndex & 0xff) - 1]; - u32 temp, status; + u32 __iomem *hostpc_reg = NULL; + u32 temp, temp1, status; unsigned long flags; int retval = 0; unsigned selector; @@ -575,6 +614,9 @@ static int ehci_hub_control ( * power, "this is the one", etc. EHCI spec supports this. */ + if (ehci->has_hostpc) + hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs + + HOSTPC0 + 4 * ((wIndex & 0xff) - 1)); spin_lock_irqsave (&ehci->lock, flags); switch (typeReq) { case ClearHubFeature: @@ -773,7 +815,11 @@ static int ehci_hub_control ( if (temp & PORT_CONNECT) { status |= 1 << USB_PORT_FEAT_CONNECTION; // status may be from integrated TT - status |= ehci_port_speed(ehci, temp); + if (ehci->has_hostpc) { + temp1 = ehci_readl(ehci, hostpc_reg); + status |= ehci_port_speed(ehci, temp1); + } else + status |= ehci_port_speed(ehci, temp); } if (temp & PORT_PE) status |= 1 << USB_PORT_FEAT_ENABLE; @@ -816,6 +862,15 @@ static int ehci_hub_control ( case SetPortFeature: selector = wIndex >> 8; wIndex &= 0xff; + if (unlikely(ehci->debug)) { + /* If the debug port is active any port + * feature requests should get denied */ + if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) && + (readl(&ehci->debug->control) & DBGP_ENABLED)) { + retval = -ENODEV; + goto error_exit; + } + } if (!wIndex || wIndex > ports) goto error; wIndex--; @@ -832,6 +887,24 @@ static int ehci_hub_control ( || (temp & PORT_RESET) != 0) goto error; ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. + * Set appropriate bit thus could put phy into low power + * mode if we have hostpc feature + */ + if (hostpc_reg) { + temp &= ~PORT_WKCONN_E; + temp |= (PORT_WKDISC_E | PORT_WKOC_E); + ehci_writel(ehci, temp | PORT_SUSPEND, + status_reg); + msleep(5);/* 5ms for HCD enter low pwr mode */ + temp1 = ehci_readl(ehci, hostpc_reg); + ehci_writel(ehci, temp1 | HOSTPC_PHCD, + hostpc_reg); + temp1 = ehci_readl(ehci, hostpc_reg); + ehci_dbg(ehci, "Port%d phy low pwr mode %s\n", + wIndex, (temp1 & HOSTPC_PHCD) ? + "succeeded" : "failed"); + } set_bit(wIndex, &ehci->suspended_ports); break; case USB_PORT_FEAT_POWER: @@ -894,6 +967,7 @@ error: /* "stall" on error */ retval = -EPIPE; } +error_exit: spin_unlock_irqrestore (&ehci->lock, flags); return retval; } diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 10d52919abb..aeda96e0af6 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -75,7 +75,8 @@ static void qh_destroy(struct ehci_qh *qh) } if (qh->dummy) ehci_qtd_free (ehci, qh->dummy); - dma_pool_free (ehci->qh_pool, qh, qh->qh_dma); + dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma); + kfree(qh); } static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags) @@ -83,12 +84,14 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags) struct ehci_qh *qh; dma_addr_t dma; - qh = (struct ehci_qh *) - dma_pool_alloc (ehci->qh_pool, flags, &dma); + qh = kzalloc(sizeof *qh, GFP_ATOMIC); if (!qh) - return qh; - - memset (qh, 0, sizeof *qh); + goto done; + qh->hw = (struct ehci_qh_hw *) + dma_pool_alloc(ehci->qh_pool, flags, &dma); + if (!qh->hw) + goto fail; + memset(qh->hw, 0, sizeof *qh->hw); qh->refcount = 1; qh->ehci = ehci; qh->qh_dma = dma; @@ -99,10 +102,15 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags) qh->dummy = ehci_qtd_alloc (ehci, flags); if (qh->dummy == NULL) { ehci_dbg (ehci, "no dummy td\n"); - dma_pool_free (ehci->qh_pool, qh, qh->qh_dma); - qh = NULL; + goto fail1; } +done: return qh; +fail1: + dma_pool_free(ehci->qh_pool, qh->hw, qh->qh_dma); +fail: + kfree(qh); + return NULL; } /* to share a qh (cpu threads, or hc) */ @@ -180,7 +188,7 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) /* QHs for control/bulk/intr transfers */ ehci->qh_pool = dma_pool_create ("ehci_qh", ehci_to_hcd(ehci)->self.controller, - sizeof (struct ehci_qh), + sizeof(struct ehci_qh_hw), 32 /* byte alignment (for hw parts) */, 4096 /* can't cross 4K */); if (!ehci->qh_pool) { diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index c2f1b7df918..378861b9d79 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -27,28 +27,8 @@ /* called after powerup, by probe or system-pm "wakeup" */ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) { - u32 temp; int retval; - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability(pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = ehci_to_hcd(ehci)->regs + temp; - temp = ehci_readl(ehci, &ehci->debug->control); - ehci_info(ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } - /* we expect static quirk code to handle the "extended capabilities" * (currently just BIOS handoff) allowed starting with EHCI 0.96 */ @@ -129,6 +109,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) return retval; switch (pdev->vendor) { + case PCI_VENDOR_ID_INTEL: + ehci->need_io_watchdog = 0; + break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { hcd->has_tt = 1; @@ -192,6 +175,25 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = ehci_to_hcd(ehci)->regs + temp; + temp = ehci_readl(ehci, &ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + ehci_reset(ehci); /* at least the Genesys GL880S needs fixup here */ @@ -242,7 +244,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) * System suspend currently expects to be able to suspend the entire * device tree, device-at-a-time. If we failed selective suspend * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for for runtime + * success. That's lying to usbcore, and it matters for runtime * PM scenarios with selective suspend and remote wakeup... */ if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 7673554fa64..00ad9ce392e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -87,31 +87,33 @@ qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf, static inline void qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) { + struct ehci_qh_hw *hw = qh->hw; + /* writes to an active overlay are unsafe */ BUG_ON(qh->qh_state != QH_STATE_IDLE); - qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); - qh->hw_alt_next = EHCI_LIST_END(ehci); + hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); + hw->hw_alt_next = EHCI_LIST_END(ehci); /* Except for control endpoints, we make hardware maintain data * toggle (like OHCI) ... here (re)initialize the toggle in the QH, * and set the pseudo-toggle in udev. Only usb_clear_halt() will * ever clear it. */ - if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) { + if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) { unsigned is_out, epnum; is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8)); - epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f; + epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f; if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) { - qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); + hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE); usb_settoggle (qh->dev, epnum, is_out, 1); } } /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */ wmb (); - qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING); + hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING); } /* if it weren't for a common silicon quirk (writing the dummy into the qh @@ -129,7 +131,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) qtd = list_entry (qh->qtd_list.next, struct ehci_qtd, qtd_list); /* first qtd may already be partially processed */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw_current) + if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) qtd = NULL; } @@ -260,7 +262,7 @@ __acquires(ehci->lock) struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv; /* S-mask in a QH means it's an interrupt urb */ - if ((qh->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) { + if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) { /* ... update hc-wide periodic stats (for usbfs) */ ehci_to_hcd(ehci)->self.bandwidth_int_reqs--; @@ -297,7 +299,6 @@ __acquires(ehci->lock) static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh); static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh); -static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh); static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh); /* @@ -308,13 +309,14 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh); static unsigned qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) { - struct ehci_qtd *last = NULL, *end = qh->dummy; + struct ehci_qtd *last, *end = qh->dummy; struct list_head *entry, *tmp; - int last_status = -EINPROGRESS; + int last_status; int stopped; unsigned count = 0; u8 state; - __le32 halt = HALT_BIT(ehci); + const __le32 halt = HALT_BIT(ehci); + struct ehci_qh_hw *hw = qh->hw; if (unlikely (list_empty (&qh->qtd_list))) return count; @@ -324,11 +326,20 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) * they add urbs to this qh's queue or mark them for unlinking. * * NOTE: unlinking expects to be done in queue order. + * + * It's a bug for qh->qh_state to be anything other than + * QH_STATE_IDLE, unless our caller is scan_async() or + * scan_periodic(). */ state = qh->qh_state; qh->qh_state = QH_STATE_COMPLETING; stopped = (state == QH_STATE_IDLE); + rescan: + last = NULL; + last_status = -EINPROGRESS; + qh->needs_rescan = 0; + /* remove de-activated QTDs from front of queue. * after faults (including short reads), cleanup this urb * then let the queue advance. @@ -392,7 +403,8 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) qtd->hw_token = cpu_to_hc32(ehci, token); wmb(); - qh->hw_token = cpu_to_hc32(ehci, token); + hw->hw_token = cpu_to_hc32(ehci, + token); goto retry_xacterr; } stopped = 1; @@ -435,8 +447,8 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* qh unlinked; token in overlay may be most current */ if (state == QH_STATE_IDLE && cpu_to_hc32(ehci, qtd->qtd_dma) - == qh->hw_current) { - token = hc32_to_cpu(ehci, qh->hw_token); + == hw->hw_current) { + token = hc32_to_cpu(ehci, hw->hw_token); /* An unlink may leave an incomplete * async transaction in the TT buffer. @@ -449,9 +461,9 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) * patch the qh later and so that completions can't * activate it while we "know" it's stopped. */ - if ((halt & qh->hw_token) == 0) { + if ((halt & hw->hw_token) == 0) { halt: - qh->hw_token |= halt; + hw->hw_token |= halt; wmb (); } } @@ -503,6 +515,21 @@ halt: ehci_qtd_free (ehci, last); } + /* Do we need to rescan for URBs dequeued during a giveback? */ + if (unlikely(qh->needs_rescan)) { + /* If the QH is already unlinked, do the rescan now. */ + if (state == QH_STATE_IDLE) + goto rescan; + + /* Otherwise we have to wait until the QH is fully unlinked. + * Our caller will start an unlink if qh->needs_rescan is + * set. But if an unlink has already started, nothing needs + * to be done. + */ + if (state != QH_STATE_LINKED) + qh->needs_rescan = 0; + } + /* restore original state; caller must unlink or relink */ qh->qh_state = state; @@ -510,7 +537,7 @@ halt: * it after fault cleanup, or recovering from silicon wrongly * overlaying the dummy qtd (which reduces DMA chatter). */ - if (stopped != 0 || qh->hw_qtd_next == EHCI_LIST_END(ehci)) { + if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) { switch (state) { case QH_STATE_IDLE: qh_refresh(ehci, qh); @@ -527,12 +554,9 @@ halt: * That should be rare for interrupt transfers, * except maybe high bandwidth ... */ - if ((cpu_to_hc32(ehci, QH_SMASK) - & qh->hw_info2) != 0) { - intr_deschedule (ehci, qh); - (void) qh_schedule (ehci, qh); - } else - unlink_async (ehci, qh); + + /* Tell the caller to start an unlink */ + qh->needs_rescan = 1; break; /* otherwise, unlink already started */ } @@ -649,7 +673,7 @@ qh_urb_transaction ( * (this will usually be overridden later.) */ if (is_input) - qtd->hw_alt_next = ehci->async->hw_alt_next; + qtd->hw_alt_next = ehci->async->hw->hw_alt_next; /* qh makes control packets use qtd toggle; maybe switch it */ if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0) @@ -744,6 +768,7 @@ qh_make ( int is_input, type; int maxp = 0; struct usb_tt *tt = urb->dev->tt; + struct ehci_qh_hw *hw; if (!qh) return qh; @@ -890,8 +915,9 @@ done: /* init as live, toggle clear, advance to dummy */ qh->qh_state = QH_STATE_IDLE; - qh->hw_info1 = cpu_to_hc32(ehci, info1); - qh->hw_info2 = cpu_to_hc32(ehci, info2); + hw = qh->hw; + hw->hw_info1 = cpu_to_hc32(ehci, info1); + hw->hw_info2 = cpu_to_hc32(ehci, info2); usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1); qh_refresh (ehci, qh); return qh; @@ -910,6 +936,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) if (unlikely(qh->clearing_tt)) return; + WARN_ON(qh->qh_state != QH_STATE_IDLE); + /* (re)start the async schedule? */ head = ehci->async; timer_action_done (ehci, TIMER_ASYNC_OFF); @@ -928,16 +956,15 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) } /* clear halt and/or toggle; and maybe recover from silicon quirk */ - if (qh->qh_state == QH_STATE_IDLE) - qh_refresh (ehci, qh); + qh_refresh(ehci, qh); /* splice right after start */ qh->qh_next = head->qh_next; - qh->hw_next = head->hw_next; + qh->hw->hw_next = head->hw->hw_next; wmb (); head->qh_next.qh = qh; - head->hw_next = dma; + head->hw->hw_next = dma; qh_get(qh); qh->xacterrs = 0; @@ -984,7 +1011,7 @@ static struct ehci_qh *qh_append_tds ( /* usb_reset_device() briefly reverts to address 0 */ if (usb_pipedevice (urb->pipe) == 0) - qh->hw_info1 &= ~qh_addr_mask; + qh->hw->hw_info1 &= ~qh_addr_mask; } /* just one way to queue requests: swap with the dummy qtd. @@ -1169,7 +1196,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) while (prev->qh_next.qh != qh) prev = prev->qh_next.qh; - prev->hw_next = qh->hw_next; + prev->hw->hw_next = qh->hw->hw_next; prev->qh_next = qh->qh_next; wmb (); @@ -1214,6 +1241,8 @@ rescan: qh = qh_get (qh); qh->stamp = ehci->stamp; temp = qh_completions (ehci, qh); + if (qh->needs_rescan) + unlink_async(ehci, qh); qh_put (qh); if (temp != 0) { goto rescan; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index edd61ee9032..3ea05936851 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -60,6 +60,20 @@ periodic_next_shadow(struct ehci_hcd *ehci, union ehci_shadow *periodic, } } +static __hc32 * +shadow_next_periodic(struct ehci_hcd *ehci, union ehci_shadow *periodic, + __hc32 tag) +{ + switch (hc32_to_cpu(ehci, tag)) { + /* our ehci_shadow.qh is actually software part */ + case Q_TYPE_QH: + return &periodic->qh->hw->hw_next; + /* others are hw parts */ + default: + return periodic->hw_next; + } +} + /* caller must hold ehci->lock */ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) { @@ -71,7 +85,8 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) while (here.ptr && here.ptr != ptr) { prev_p = periodic_next_shadow(ehci, prev_p, Q_NEXT_TYPE(ehci, *hw_p)); - hw_p = here.hw_next; + hw_p = shadow_next_periodic(ehci, &here, + Q_NEXT_TYPE(ehci, *hw_p)); here = *prev_p; } /* an interrupt entry (at list end) could have been shared */ @@ -83,7 +98,7 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) */ *prev_p = *periodic_next_shadow(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); - *hw_p = *here.hw_next; + *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); } /* how many of the uframe's 125 usecs are allocated? */ @@ -93,18 +108,20 @@ periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe) __hc32 *hw_p = &ehci->periodic [frame]; union ehci_shadow *q = &ehci->pshadow [frame]; unsigned usecs = 0; + struct ehci_qh_hw *hw; while (q->ptr) { switch (hc32_to_cpu(ehci, Q_NEXT_TYPE(ehci, *hw_p))) { case Q_TYPE_QH: + hw = q->qh->hw; /* is it in the S-mask? */ - if (q->qh->hw_info2 & cpu_to_hc32(ehci, 1 << uframe)) + if (hw->hw_info2 & cpu_to_hc32(ehci, 1 << uframe)) usecs += q->qh->usecs; /* ... or C-mask? */ - if (q->qh->hw_info2 & cpu_to_hc32(ehci, + if (hw->hw_info2 & cpu_to_hc32(ehci, 1 << (8 + uframe))) usecs += q->qh->c_usecs; - hw_p = &q->qh->hw_next; + hw_p = &hw->hw_next; q = &q->qh->qh_next; break; // case Q_TYPE_FSTN: @@ -237,10 +254,10 @@ periodic_tt_usecs ( continue; case Q_TYPE_QH: if (same_tt(dev, q->qh->dev)) { - uf = tt_start_uframe(ehci, q->qh->hw_info2); + uf = tt_start_uframe(ehci, q->qh->hw->hw_info2); tt_usecs[uf] += q->qh->tt_usecs; } - hw_p = &q->qh->hw_next; + hw_p = &q->qh->hw->hw_next; q = &q->qh->qh_next; continue; case Q_TYPE_SITD: @@ -375,6 +392,7 @@ static int tt_no_collision ( for (; frame < ehci->periodic_size; frame += period) { union ehci_shadow here; __hc32 type; + struct ehci_qh_hw *hw; here = ehci->pshadow [frame]; type = Q_NEXT_TYPE(ehci, ehci->periodic [frame]); @@ -385,17 +403,18 @@ static int tt_no_collision ( here = here.itd->itd_next; continue; case Q_TYPE_QH: + hw = here.qh->hw; if (same_tt (dev, here.qh->dev)) { u32 mask; mask = hc32_to_cpu(ehci, - here.qh->hw_info2); + hw->hw_info2); /* "knows" no gap is needed */ mask |= mask >> 8; if (mask & uf_mask) break; } - type = Q_NEXT_TYPE(ehci, here.qh->hw_next); + type = Q_NEXT_TYPE(ehci, hw->hw_next); here = here.qh->qh_next; continue; case Q_TYPE_SITD: @@ -498,7 +517,8 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) dev_dbg (&qh->dev->dev, "link qh%d-%04x/%p start %d [%d/%d us]\n", - period, hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK), + period, hc32_to_cpup(ehci, &qh->hw->hw_info2) + & (QH_CMASK | QH_SMASK), qh, qh->start, qh->usecs, qh->c_usecs); /* high bandwidth, or otherwise every microframe */ @@ -517,7 +537,7 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) if (type == cpu_to_hc32(ehci, Q_TYPE_QH)) break; prev = periodic_next_shadow(ehci, prev, type); - hw_p = &here.qh->hw_next; + hw_p = shadow_next_periodic(ehci, &here, type); here = *prev; } @@ -528,14 +548,14 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) if (qh->period > here.qh->period) break; prev = &here.qh->qh_next; - hw_p = &here.qh->hw_next; + hw_p = &here.qh->hw->hw_next; here = *prev; } /* link in this qh, unless some earlier pass did that */ if (qh != here.qh) { qh->qh_next = here; if (here.qh) - qh->hw_next = *hw_p; + qh->hw->hw_next = *hw_p; wmb (); prev->qh = qh; *hw_p = QH_NEXT (ehci, qh->qh_dma); @@ -581,7 +601,7 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) dev_dbg (&qh->dev->dev, "unlink qh%d-%04x/%p start %d [%d/%d us]\n", qh->period, - hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK), + hc32_to_cpup(ehci, &qh->hw->hw_info2) & (QH_CMASK | QH_SMASK), qh, qh->start, qh->usecs, qh->c_usecs); /* qh->qh_next still "live" to HC */ @@ -595,7 +615,19 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) { - unsigned wait; + unsigned wait; + struct ehci_qh_hw *hw = qh->hw; + int rc; + + /* If the QH isn't linked then there's nothing we can do + * unless we were called during a giveback, in which case + * qh_completions() has to deal with it. + */ + if (qh->qh_state != QH_STATE_LINKED) { + if (qh->qh_state == QH_STATE_COMPLETING) + qh->needs_rescan = 1; + return; + } qh_unlink_periodic (ehci, qh); @@ -606,15 +638,33 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) */ if (list_empty (&qh->qtd_list) || (cpu_to_hc32(ehci, QH_CMASK) - & qh->hw_info2) != 0) + & hw->hw_info2) != 0) wait = 2; else wait = 55; /* worst case: 3 * 1024 */ udelay (wait); qh->qh_state = QH_STATE_IDLE; - qh->hw_next = EHCI_LIST_END(ehci); + hw->hw_next = EHCI_LIST_END(ehci); wmb (); + + qh_completions(ehci, qh); + + /* reschedule QH iff another request is queued */ + if (!list_empty(&qh->qtd_list) && + HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + rc = qh_schedule(ehci, qh); + + /* An error here likely indicates handshake failure + * or no space left in the schedule. Neither fault + * should happen often ... + * + * FIXME kill the now-dysfunctional queued urbs + */ + if (rc != 0) + ehci_err(ehci, "can't reschedule qh %p, err %d\n", + qh, rc); + } } /*-------------------------------------------------------------------------*/ @@ -739,14 +789,15 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) unsigned uframe; __hc32 c_mask; unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */ + struct ehci_qh_hw *hw = qh->hw; qh_refresh(ehci, qh); - qh->hw_next = EHCI_LIST_END(ehci); + hw->hw_next = EHCI_LIST_END(ehci); frame = qh->start; /* reuse the previous schedule slots, if we can */ if (frame < qh->period) { - uframe = ffs(hc32_to_cpup(ehci, &qh->hw_info2) & QH_SMASK); + uframe = ffs(hc32_to_cpup(ehci, &hw->hw_info2) & QH_SMASK); status = check_intr_schedule (ehci, frame, --uframe, qh, &c_mask); } else { @@ -784,11 +835,11 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->start = frame; /* reset S-frame and (maybe) C-frame masks */ - qh->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK)); - qh->hw_info2 |= qh->period + hw->hw_info2 &= cpu_to_hc32(ehci, ~(QH_CMASK | QH_SMASK)); + hw->hw_info2 |= qh->period ? cpu_to_hc32(ehci, 1 << uframe) : cpu_to_hc32(ehci, QH_SMASK); - qh->hw_info2 |= c_mask; + hw->hw_info2 |= c_mask; } else ehci_dbg (ehci, "reused qh %p schedule\n", qh); @@ -2188,10 +2239,11 @@ restart: case Q_TYPE_QH: /* handle any completions */ temp.qh = qh_get (q.qh); - type = Q_NEXT_TYPE(ehci, q.qh->hw_next); + type = Q_NEXT_TYPE(ehci, q.qh->hw->hw_next); q = q.qh->qh_next; modified = qh_completions (ehci, temp.qh); - if (unlikely (list_empty (&temp.qh->qtd_list))) + if (unlikely(list_empty(&temp.qh->qtd_list) || + temp.qh->needs_rescan)) intr_deschedule (ehci, temp.qh); qh_put (temp.qh); break; diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c new file mode 100644 index 00000000000..cfa21ea20f8 --- /dev/null +++ b/drivers/usb/host/ehci-w90x900.c @@ -0,0 +1,181 @@ +/* + * linux/driver/usb/host/ehci-w90x900.c + * + * Copyright (c) 2008 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include <linux/platform_device.h> + +/*ebable phy0 and phy1 for w90p910*/ +#define ENPHY (0x01<<8) +#define PHY0_CTR (0xA4) +#define PHY1_CTR (0xA8) + +static int __devinit usb_w90x900_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct resource *res; + int retval = 0, irq; + unsigned long val; + + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -ENXIO; + goto err1; + } + + hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + retval = -EFAULT; + goto err3; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + + /* enable PHY 0,1,the regs only apply to w90p910 + * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of + * w90p910 IC relative to ehci->regs. + */ + val = __raw_readl(ehci->regs+PHY0_CTR); + val |= ENPHY; + __raw_writel(val, ehci->regs+PHY0_CTR); + + val = __raw_readl(ehci->regs+PHY1_CTR); + val |= ENPHY; + __raw_writel(val, ehci->regs+PHY1_CTR); + + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + ehci->sbrn = 0x20; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + goto err4; + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + + ehci_writel(ehci, 1, &ehci->regs->configured_flag); + + return retval; +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + return retval; +} + +static +void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static const struct hc_driver ehci_w90x900_hc_driver = { + .description = hcd_name, + .product_desc = "Nuvoton w90x900 EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_USB2|HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ehci_init, + .start = ehci_run, + + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int __devinit ehci_w90x900_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return usb_w90x900_probe(&ehci_w90x900_hc_driver, pdev); +} + +static int __devexit ehci_w90x900_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_w90x900_remove(hcd, pdev); + + return 0; +} + +static struct platform_driver ehci_hcd_w90x900_driver = { + .probe = ehci_w90x900_probe, + .remove = __devexit_p(ehci_w90x900_remove), + .driver = { + .name = "w90x900-ehci", + .owner = THIS_MODULE, + }, +}; + +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); +MODULE_DESCRIPTION("w90p910 usb ehci driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-ehci"); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2bfff30f470..064e76821ff 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16; #define __hc16 __le16 #endif -/* statistics can be kept for for tuning/monitoring */ +/* statistics can be kept for tuning/monitoring */ struct ehci_stats { /* irq usage */ unsigned long normal; @@ -126,6 +126,7 @@ struct ehci_hcd { /* one per controller */ unsigned big_endian_mmio:1; unsigned big_endian_desc:1; unsigned has_amcc_usb23:1; + unsigned need_io_watchdog:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -135,6 +136,7 @@ struct ehci_hcd { /* one per controller */ #define OHCI_HCCTRL_OFFSET 0x4 #define OHCI_HCCTRL_LEN 0x4 __hc32 *ohci_hcctrl_reg; + unsigned has_hostpc:1; u8 sbrn; /* packed release number */ @@ -298,8 +300,8 @@ union ehci_shadow { * These appear in both the async and (for interrupt) periodic schedules. */ -struct ehci_qh { - /* first part defined by EHCI spec */ +/* first part defined by EHCI spec */ +struct ehci_qh_hw { __hc32 hw_next; /* see EHCI 3.6.1 */ __hc32 hw_info1; /* see EHCI 3.6.2 */ #define QH_HEAD 0x00008000 @@ -317,7 +319,10 @@ struct ehci_qh { __hc32 hw_token; __hc32 hw_buf [5]; __hc32 hw_buf_hi [5]; +} __attribute__ ((aligned(32))); +struct ehci_qh { + struct ehci_qh_hw *hw; /* the rest is HCD-private */ dma_addr_t qh_dma; /* address of qh */ union ehci_shadow qh_next; /* ptr to qh; or periodic */ @@ -336,6 +341,7 @@ struct ehci_qh { u32 refcount; unsigned stamp; + u8 needs_rescan; /* Dequeue during giveback */ u8 qh_state; #define QH_STATE_LINKED 1 /* HC sees this */ #define QH_STATE_UNLINK 2 /* HC may still see this */ @@ -357,7 +363,7 @@ struct ehci_qh { struct usb_device *dev; /* access to TT */ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ -} __attribute__ ((aligned (32))); +}; /*-------------------------------------------------------------------------*/ @@ -544,7 +550,7 @@ static inline unsigned int ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) { if (ehci_is_TDI(ehci)) { - switch ((portsc>>26)&3) { + switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { case 0: return 0; case 1: diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c new file mode 100644 index 00000000000..e35d82808ba --- /dev/null +++ b/drivers/usb/host/isp1362-hcd.c @@ -0,0 +1,2909 @@ +/* + * ISP1362 HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2005 Lothar Wassmann <LW@KARO-electronics.de> + * + * Derived from the SL811 HCD, rewritten for ISP116x. + * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee> + * + * Portions: + * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) + * Copyright (C) 2004 David Brownell + */ + +/* + * The ISP1362 chip requires a large delay (300ns and 462ns) between + * accesses to the address and data register. + * The following timing options exist: + * + * 1. Configure your memory controller to add such delays if it can (the best) + * 2. Implement platform-specific delay function possibly + * combined with configuring the memory controller; see + * include/linux/usb_isp1362.h for more info. + * 3. Use ndelay (easiest, poorest). + * + * Use the corresponding macros USE_PLATFORM_DELAY and USE_NDELAY in the + * platform specific section of isp1362.h to select the appropriate variant. + * + * Also note that according to the Philips "ISP1362 Errata" document + * Rev 1.00 from 27 May data corruption may occur when the #WR signal + * is reasserted (even with #CS deasserted) within 132ns after a + * write cycle to any controller register. If the hardware doesn't + * implement the recommended fix (gating the #WR with #CS) software + * must ensure that no further write cycle (not necessarily to the chip!) + * is issued by the CPU within this interval. + + * For PXA25x this can be ensured by using VLIO with the maximum + * recovery time (MSCx = 0x7f8c) with a memory clock of 99.53 MHz. + */ + +#ifdef CONFIG_USB_DEBUG +# define ISP1362_DEBUG +#else +# undef ISP1362_DEBUG +#endif + +/* + * The PXA255 UDC apparently doesn't handle GET_STATUS, GET_CONFIG and + * GET_INTERFACE requests correctly when the SETUP and DATA stages of the + * requests are carried out in separate frames. This will delay any SETUP + * packets until the start of the next frame so that this situation is + * unlikely to occur (and makes usbtest happy running with a PXA255 target + * device). + */ +#undef BUGGY_PXA2XX_UDC_USBTEST + +#undef PTD_TRACE +#undef URB_TRACE +#undef VERBOSE +#undef REGISTERS + +/* This enables a memory test on the ISP1362 chip memory to make sure the + * chip access timing is correct. + */ +#undef CHIP_BUFFER_TEST + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/usb.h> +#include <linux/usb/isp1362.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/bitops.h> + +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +static int dbg_level; +#ifdef ISP1362_DEBUG +module_param(dbg_level, int, 0644); +#else +module_param(dbg_level, int, 0); +#define STUB_DEBUG_FILE +#endif + +#include "../core/hcd.h" +#include "../core/usb.h" +#include "isp1362.h" + + +#define DRIVER_VERSION "2005-04-04" +#define DRIVER_DESC "ISP1362 USB Host Controller Driver" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +static const char hcd_name[] = "isp1362-hcd"; + +static void isp1362_hc_stop(struct usb_hcd *hcd); +static int isp1362_hc_start(struct usb_hcd *hcd); + +/*-------------------------------------------------------------------------*/ + +/* + * When called from the interrupthandler only isp1362_hcd->irqenb is modified, + * since the interrupt handler will write isp1362_hcd->irqenb to HCuPINT upon + * completion. + * We don't need a 'disable' counterpart, since interrupts will be disabled + * only by the interrupt handler. + */ +static inline void isp1362_enable_int(struct isp1362_hcd *isp1362_hcd, u16 mask) +{ + if ((isp1362_hcd->irqenb | mask) == isp1362_hcd->irqenb) + return; + if (mask & ~isp1362_hcd->irqenb) + isp1362_write_reg16(isp1362_hcd, HCuPINT, mask & ~isp1362_hcd->irqenb); + isp1362_hcd->irqenb |= mask; + if (isp1362_hcd->irq_active) + return; + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb); +} + +/*-------------------------------------------------------------------------*/ + +static inline struct isp1362_ep_queue *get_ptd_queue(struct isp1362_hcd *isp1362_hcd, + u16 offset) +{ + struct isp1362_ep_queue *epq = NULL; + + if (offset < isp1362_hcd->istl_queue[1].buf_start) + epq = &isp1362_hcd->istl_queue[0]; + else if (offset < isp1362_hcd->intl_queue.buf_start) + epq = &isp1362_hcd->istl_queue[1]; + else if (offset < isp1362_hcd->atl_queue.buf_start) + epq = &isp1362_hcd->intl_queue; + else if (offset < isp1362_hcd->atl_queue.buf_start + + isp1362_hcd->atl_queue.buf_size) + epq = &isp1362_hcd->atl_queue; + + if (epq) + DBG(1, "%s: PTD $%04x is on %s queue\n", __func__, offset, epq->name); + else + pr_warning("%s: invalid PTD $%04x\n", __func__, offset); + + return epq; +} + +static inline int get_ptd_offset(struct isp1362_ep_queue *epq, u8 index) +{ + int offset; + + if (index * epq->blk_size > epq->buf_size) { + pr_warning("%s: Bad %s index %d(%d)\n", __func__, epq->name, index, + epq->buf_size / epq->blk_size); + return -EINVAL; + } + offset = epq->buf_start + index * epq->blk_size; + DBG(3, "%s: %s PTD[%02x] # %04x\n", __func__, epq->name, index, offset); + + return offset; +} + +/*-------------------------------------------------------------------------*/ + +static inline u16 max_transfer_size(struct isp1362_ep_queue *epq, size_t size, + int mps) +{ + u16 xfer_size = min_t(size_t, MAX_XFER_SIZE, size); + + xfer_size = min_t(size_t, xfer_size, epq->buf_avail * epq->blk_size - PTD_HEADER_SIZE); + if (xfer_size < size && xfer_size % mps) + xfer_size -= xfer_size % mps; + + return xfer_size; +} + +static int claim_ptd_buffers(struct isp1362_ep_queue *epq, + struct isp1362_ep *ep, u16 len) +{ + int ptd_offset = -EINVAL; + int index; + int num_ptds = ((len + PTD_HEADER_SIZE - 1) / epq->blk_size) + 1; + int found = -1; + int last = -1; + + BUG_ON(len > epq->buf_size); + + if (!epq->buf_avail) + return -ENOMEM; + + if (ep->num_ptds) + pr_err("%s: %s len %d/%d num_ptds %d buf_map %08lx skip_map %08lx\n", __func__, + epq->name, len, epq->blk_size, num_ptds, epq->buf_map, epq->skip_map); + BUG_ON(ep->num_ptds != 0); + + for (index = 0; index <= epq->buf_count - num_ptds; index++) { + if (test_bit(index, &epq->buf_map)) + continue; + found = index; + for (last = index + 1; last < index + num_ptds; last++) { + if (test_bit(last, &epq->buf_map)) { + found = -1; + break; + } + } + if (found >= 0) + break; + } + if (found < 0) + return -EOVERFLOW; + + DBG(1, "%s: Found %d PTDs[%d] for %d/%d byte\n", __func__, + num_ptds, found, len, (int)(epq->blk_size - PTD_HEADER_SIZE)); + ptd_offset = get_ptd_offset(epq, found); + WARN_ON(ptd_offset < 0); + ep->ptd_offset = ptd_offset; + ep->num_ptds += num_ptds; + epq->buf_avail -= num_ptds; + BUG_ON(epq->buf_avail > epq->buf_count); + ep->ptd_index = found; + for (index = found; index < last; index++) + __set_bit(index, &epq->buf_map); + DBG(1, "%s: Done %s PTD[%d] $%04x, avail %d count %d claimed %d %08lx:%08lx\n", + __func__, epq->name, ep->ptd_index, ep->ptd_offset, + epq->buf_avail, epq->buf_count, num_ptds, epq->buf_map, epq->skip_map); + + return found; +} + +static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep) +{ + int index = ep->ptd_index; + int last = ep->ptd_index + ep->num_ptds; + + if (last > epq->buf_count) + pr_err("%s: ep %p req %d len %d %s PTD[%d] $%04x num_ptds %d buf_count %d buf_avail %d buf_map %08lx skip_map %08lx\n", + __func__, ep, ep->num_req, ep->length, epq->name, ep->ptd_index, + ep->ptd_offset, ep->num_ptds, epq->buf_count, epq->buf_avail, + epq->buf_map, epq->skip_map); + BUG_ON(last > epq->buf_count); + + for (; index < last; index++) { + __clear_bit(index, &epq->buf_map); + __set_bit(index, &epq->skip_map); + } + epq->buf_avail += ep->num_ptds; + epq->ptd_count--; + + BUG_ON(epq->buf_avail > epq->buf_count); + BUG_ON(epq->ptd_count > epq->buf_count); + + DBG(1, "%s: Done %s PTDs $%04x released %d avail %d count %d\n", + __func__, epq->name, + ep->ptd_offset, ep->num_ptds, epq->buf_avail, epq->buf_count); + DBG(1, "%s: buf_map %08lx skip_map %08lx\n", __func__, + epq->buf_map, epq->skip_map); + + ep->num_ptds = 0; + ep->ptd_offset = -EINVAL; + ep->ptd_index = -EINVAL; +} + +/*-------------------------------------------------------------------------*/ + +/* + Set up PTD's. +*/ +static void prepare_ptd(struct isp1362_hcd *isp1362_hcd, struct urb *urb, + struct isp1362_ep *ep, struct isp1362_ep_queue *epq, + u16 fno) +{ + struct ptd *ptd; + int toggle; + int dir; + u16 len; + size_t buf_len = urb->transfer_buffer_length - urb->actual_length; + + DBG(3, "%s: %s ep %p\n", __func__, epq->name, ep); + + ptd = &ep->ptd; + + ep->data = (unsigned char *)urb->transfer_buffer + urb->actual_length; + + switch (ep->nextpid) { + case USB_PID_IN: + toggle = usb_gettoggle(urb->dev, ep->epnum, 0); + dir = PTD_DIR_IN; + if (usb_pipecontrol(urb->pipe)) { + len = min_t(size_t, ep->maxpacket, buf_len); + } else if (usb_pipeisoc(urb->pipe)) { + len = min_t(size_t, urb->iso_frame_desc[fno].length, MAX_XFER_SIZE); + ep->data = urb->transfer_buffer + urb->iso_frame_desc[fno].offset; + } else + len = max_transfer_size(epq, buf_len, ep->maxpacket); + DBG(1, "%s: IN len %d/%d/%d from URB\n", __func__, len, ep->maxpacket, + (int)buf_len); + break; + case USB_PID_OUT: + toggle = usb_gettoggle(urb->dev, ep->epnum, 1); + dir = PTD_DIR_OUT; + if (usb_pipecontrol(urb->pipe)) + len = min_t(size_t, ep->maxpacket, buf_len); + else if (usb_pipeisoc(urb->pipe)) + len = min_t(size_t, urb->iso_frame_desc[0].length, MAX_XFER_SIZE); + else + len = max_transfer_size(epq, buf_len, ep->maxpacket); + if (len == 0) + pr_info("%s: Sending ZERO packet: %d\n", __func__, + urb->transfer_flags & URB_ZERO_PACKET); + DBG(1, "%s: OUT len %d/%d/%d from URB\n", __func__, len, ep->maxpacket, + (int)buf_len); + break; + case USB_PID_SETUP: + toggle = 0; + dir = PTD_DIR_SETUP; + len = sizeof(struct usb_ctrlrequest); + DBG(1, "%s: SETUP len %d\n", __func__, len); + ep->data = urb->setup_packet; + break; + case USB_PID_ACK: + toggle = 1; + len = 0; + dir = (urb->transfer_buffer_length && usb_pipein(urb->pipe)) ? + PTD_DIR_OUT : PTD_DIR_IN; + DBG(1, "%s: ACK len %d\n", __func__, len); + break; + default: + toggle = dir = len = 0; + pr_err("%s@%d: ep->nextpid %02x\n", __func__, __LINE__, ep->nextpid); + BUG_ON(1); + } + + ep->length = len; + if (!len) + ep->data = NULL; + + ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle); + ptd->mps = PTD_MPS(ep->maxpacket) | PTD_SPD(urb->dev->speed == USB_SPEED_LOW) | + PTD_EP(ep->epnum); + ptd->len = PTD_LEN(len) | PTD_DIR(dir); + ptd->faddr = PTD_FA(usb_pipedevice(urb->pipe)); + + if (usb_pipeint(urb->pipe)) { + ptd->faddr |= PTD_SF_INT(ep->branch); + ptd->faddr |= PTD_PR(ep->interval ? __ffs(ep->interval) : 0); + } + if (usb_pipeisoc(urb->pipe)) + ptd->faddr |= PTD_SF_ISO(fno); + + DBG(1, "%s: Finished\n", __func__); +} + +static void isp1362_write_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep, + struct isp1362_ep_queue *epq) +{ + struct ptd *ptd = &ep->ptd; + int len = PTD_GET_DIR(ptd) == PTD_DIR_IN ? 0 : ep->length; + + _BUG_ON(ep->ptd_offset < 0); + + prefetch(ptd); + isp1362_write_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE); + if (len) + isp1362_write_buffer(isp1362_hcd, ep->data, + ep->ptd_offset + PTD_HEADER_SIZE, len); + + dump_ptd(ptd); + dump_ptd_out_data(ptd, ep->data); +} + +static void isp1362_read_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep, + struct isp1362_ep_queue *epq) +{ + struct ptd *ptd = &ep->ptd; + int act_len; + + WARN_ON(list_empty(&ep->active)); + BUG_ON(ep->ptd_offset < 0); + + list_del_init(&ep->active); + DBG(1, "%s: ep %p removed from active list %p\n", __func__, ep, &epq->active); + + prefetchw(ptd); + isp1362_read_buffer(isp1362_hcd, ptd, ep->ptd_offset, PTD_HEADER_SIZE); + dump_ptd(ptd); + act_len = PTD_GET_COUNT(ptd); + if (PTD_GET_DIR(ptd) != PTD_DIR_IN || act_len == 0) + return; + if (act_len > ep->length) + pr_err("%s: ep %p PTD $%04x act_len %d ep->length %d\n", __func__, ep, + ep->ptd_offset, act_len, ep->length); + BUG_ON(act_len > ep->length); + /* Only transfer the amount of data that has actually been overwritten + * in the chip buffer. We don't want any data that doesn't belong to the + * transfer to leak out of the chip to the callers transfer buffer! + */ + prefetchw(ep->data); + isp1362_read_buffer(isp1362_hcd, ep->data, + ep->ptd_offset + PTD_HEADER_SIZE, act_len); + dump_ptd_in_data(ptd, ep->data); +} + +/* + * INT PTDs will stay in the chip until data is available. + * This function will remove a PTD from the chip when the URB is dequeued. + * Must be called with the spinlock held and IRQs disabled + */ +static void remove_ptd(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) + +{ + int index; + struct isp1362_ep_queue *epq; + + DBG(1, "%s: ep %p PTD[%d] $%04x\n", __func__, ep, ep->ptd_index, ep->ptd_offset); + BUG_ON(ep->ptd_offset < 0); + + epq = get_ptd_queue(isp1362_hcd, ep->ptd_offset); + BUG_ON(!epq); + + /* put ep in remove_list for cleanup */ + WARN_ON(!list_empty(&ep->remove_list)); + list_add_tail(&ep->remove_list, &isp1362_hcd->remove_list); + /* let SOF interrupt handle the cleanup */ + isp1362_enable_int(isp1362_hcd, HCuPINT_SOF); + + index = ep->ptd_index; + if (index < 0) + /* ISO queues don't have SKIP registers */ + return; + + DBG(1, "%s: Disabling PTD[%02x] $%04x %08lx|%08x\n", __func__, + index, ep->ptd_offset, epq->skip_map, 1 << index); + + /* prevent further processing of PTD (will be effective after next SOF) */ + epq->skip_map |= 1 << index; + if (epq == &isp1362_hcd->atl_queue) { + DBG(2, "%s: ATLSKIP = %08x -> %08lx\n", __func__, + isp1362_read_reg32(isp1362_hcd, HCATLSKIP), epq->skip_map); + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, epq->skip_map); + if (~epq->skip_map == 0) + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE); + } else if (epq == &isp1362_hcd->intl_queue) { + DBG(2, "%s: INTLSKIP = %08x -> %08lx\n", __func__, + isp1362_read_reg32(isp1362_hcd, HCINTLSKIP), epq->skip_map); + isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, epq->skip_map); + if (~epq->skip_map == 0) + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE); + } +} + +/* + Take done or failed requests out of schedule. Give back + processed urbs. +*/ +static void finish_request(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep, + struct urb *urb, int status) + __releases(isp1362_hcd->lock) + __acquires(isp1362_hcd->lock) +{ + urb->hcpriv = NULL; + ep->error_count = 0; + + if (usb_pipecontrol(urb->pipe)) + ep->nextpid = USB_PID_SETUP; + + URB_DBG("%s: req %d FA %d ep%d%s %s: len %d/%d %s stat %d\n", __func__, + ep->num_req, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + !usb_pipein(urb->pipe) ? "out" : "in", + usb_pipecontrol(urb->pipe) ? "ctrl" : + usb_pipeint(urb->pipe) ? "int" : + usb_pipebulk(urb->pipe) ? "bulk" : + "iso", + urb->actual_length, urb->transfer_buffer_length, + !(urb->transfer_flags & URB_SHORT_NOT_OK) ? + "short_ok" : "", urb->status); + + + usb_hcd_unlink_urb_from_ep(isp1362_hcd_to_hcd(isp1362_hcd), urb); + spin_unlock(&isp1362_hcd->lock); + usb_hcd_giveback_urb(isp1362_hcd_to_hcd(isp1362_hcd), urb, status); + spin_lock(&isp1362_hcd->lock); + + /* take idle endpoints out of the schedule right away */ + if (!list_empty(&ep->hep->urb_list)) + return; + + /* async deschedule */ + if (!list_empty(&ep->schedule)) { + list_del_init(&ep->schedule); + return; + } + + + if (ep->interval) { + /* periodic deschedule */ + DBG(1, "deschedule qh%d/%p branch %d load %d bandwidth %d -> %d\n", ep->interval, + ep, ep->branch, ep->load, + isp1362_hcd->load[ep->branch], + isp1362_hcd->load[ep->branch] - ep->load); + isp1362_hcd->load[ep->branch] -= ep->load; + ep->branch = PERIODIC_SIZE; + } +} + +/* + * Analyze transfer results, handle partial transfers and errors +*/ +static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) +{ + struct urb *urb = get_urb(ep); + struct usb_device *udev; + struct ptd *ptd; + int short_ok; + u16 len; + int urbstat = -EINPROGRESS; + u8 cc; + + DBG(2, "%s: ep %p req %d\n", __func__, ep, ep->num_req); + + udev = urb->dev; + ptd = &ep->ptd; + cc = PTD_GET_CC(ptd); + if (cc == PTD_NOTACCESSED) { + pr_err("%s: req %d PTD %p Untouched by ISP1362\n", __func__, + ep->num_req, ptd); + cc = PTD_DEVNOTRESP; + } + + short_ok = !(urb->transfer_flags & URB_SHORT_NOT_OK); + len = urb->transfer_buffer_length - urb->actual_length; + + /* Data underrun is special. For allowed underrun + we clear the error and continue as normal. For + forbidden underrun we finish the DATA stage + immediately while for control transfer, + we do a STATUS stage. + */ + if (cc == PTD_DATAUNDERRUN) { + if (short_ok) { + DBG(1, "%s: req %d Allowed data underrun short_%sok %d/%d/%d byte\n", + __func__, ep->num_req, short_ok ? "" : "not_", + PTD_GET_COUNT(ptd), ep->maxpacket, len); + cc = PTD_CC_NOERROR; + urbstat = 0; + } else { + DBG(1, "%s: req %d Data Underrun %s nextpid %02x short_%sok %d/%d/%d byte\n", + __func__, ep->num_req, + usb_pipein(urb->pipe) ? "IN" : "OUT", ep->nextpid, + short_ok ? "" : "not_", + PTD_GET_COUNT(ptd), ep->maxpacket, len); + if (usb_pipecontrol(urb->pipe)) { + ep->nextpid = USB_PID_ACK; + /* save the data underrun error code for later and + * procede with the status stage + */ + urb->actual_length += PTD_GET_COUNT(ptd); + BUG_ON(urb->actual_length > urb->transfer_buffer_length); + + if (urb->status == -EINPROGRESS) + urb->status = cc_to_error[PTD_DATAUNDERRUN]; + } else { + usb_settoggle(udev, ep->epnum, ep->nextpid == USB_PID_OUT, + PTD_GET_TOGGLE(ptd)); + urbstat = cc_to_error[PTD_DATAUNDERRUN]; + } + goto out; + } + } + + if (cc != PTD_CC_NOERROR) { + if (++ep->error_count >= 3 || cc == PTD_CC_STALL || cc == PTD_DATAOVERRUN) { + urbstat = cc_to_error[cc]; + DBG(1, "%s: req %d nextpid %02x, status %d, error %d, error_count %d\n", + __func__, ep->num_req, ep->nextpid, urbstat, cc, + ep->error_count); + } + goto out; + } + + switch (ep->nextpid) { + case USB_PID_OUT: + if (PTD_GET_COUNT(ptd) != ep->length) + pr_err("%s: count=%d len=%d\n", __func__, + PTD_GET_COUNT(ptd), ep->length); + BUG_ON(PTD_GET_COUNT(ptd) != ep->length); + urb->actual_length += ep->length; + BUG_ON(urb->actual_length > urb->transfer_buffer_length); + usb_settoggle(udev, ep->epnum, 1, PTD_GET_TOGGLE(ptd)); + if (urb->actual_length == urb->transfer_buffer_length) { + DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__, + ep->num_req, len, ep->maxpacket, urbstat); + if (usb_pipecontrol(urb->pipe)) { + DBG(3, "%s: req %d %s Wait for ACK\n", __func__, + ep->num_req, + usb_pipein(urb->pipe) ? "IN" : "OUT"); + ep->nextpid = USB_PID_ACK; + } else { + if (len % ep->maxpacket || + !(urb->transfer_flags & URB_ZERO_PACKET)) { + urbstat = 0; + DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n", + __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT", + urbstat, len, ep->maxpacket, urb->actual_length); + } + } + } + break; + case USB_PID_IN: + len = PTD_GET_COUNT(ptd); + BUG_ON(len > ep->length); + urb->actual_length += len; + BUG_ON(urb->actual_length > urb->transfer_buffer_length); + usb_settoggle(udev, ep->epnum, 0, PTD_GET_TOGGLE(ptd)); + /* if transfer completed or (allowed) data underrun */ + if ((urb->transfer_buffer_length == urb->actual_length) || + len % ep->maxpacket) { + DBG(3, "%s: req %d xfer complete %d/%d status %d -> 0\n", __func__, + ep->num_req, len, ep->maxpacket, urbstat); + if (usb_pipecontrol(urb->pipe)) { + DBG(3, "%s: req %d %s Wait for ACK\n", __func__, + ep->num_req, + usb_pipein(urb->pipe) ? "IN" : "OUT"); + ep->nextpid = USB_PID_ACK; + } else { + urbstat = 0; + DBG(3, "%s: req %d URB %s status %d count %d/%d/%d\n", + __func__, ep->num_req, usb_pipein(urb->pipe) ? "IN" : "OUT", + urbstat, len, ep->maxpacket, urb->actual_length); + } + } + break; + case USB_PID_SETUP: + if (urb->transfer_buffer_length == urb->actual_length) { + ep->nextpid = USB_PID_ACK; + } else if (usb_pipeout(urb->pipe)) { + usb_settoggle(udev, 0, 1, 1); + ep->nextpid = USB_PID_OUT; + } else { + usb_settoggle(udev, 0, 0, 1); + ep->nextpid = USB_PID_IN; + } + break; + case USB_PID_ACK: + DBG(3, "%s: req %d got ACK %d -> 0\n", __func__, ep->num_req, + urbstat); + WARN_ON(urbstat != -EINPROGRESS); + urbstat = 0; + ep->nextpid = 0; + break; + default: + BUG_ON(1); + } + + out: + if (urbstat != -EINPROGRESS) { + DBG(2, "%s: Finishing ep %p req %d urb %p status %d\n", __func__, + ep, ep->num_req, urb, urbstat); + finish_request(isp1362_hcd, ep, urb, urbstat); + } +} + +static void finish_unlinks(struct isp1362_hcd *isp1362_hcd) +{ + struct isp1362_ep *ep; + struct isp1362_ep *tmp; + + list_for_each_entry_safe(ep, tmp, &isp1362_hcd->remove_list, remove_list) { + struct isp1362_ep_queue *epq = + get_ptd_queue(isp1362_hcd, ep->ptd_offset); + int index = ep->ptd_index; + + BUG_ON(epq == NULL); + if (index >= 0) { + DBG(1, "%s: remove PTD[%d] $%04x\n", __func__, index, ep->ptd_offset); + BUG_ON(ep->num_ptds == 0); + release_ptd_buffers(epq, ep); + } + if (!list_empty(&ep->hep->urb_list)) { + struct urb *urb = get_urb(ep); + + DBG(1, "%s: Finishing req %d ep %p from remove_list\n", __func__, + ep->num_req, ep); + finish_request(isp1362_hcd, ep, urb, -ESHUTDOWN); + } + WARN_ON(list_empty(&ep->active)); + if (!list_empty(&ep->active)) { + list_del_init(&ep->active); + DBG(1, "%s: ep %p removed from active list\n", __func__, ep); + } + list_del_init(&ep->remove_list); + DBG(1, "%s: ep %p removed from remove_list\n", __func__, ep); + } + DBG(1, "%s: Done\n", __func__); +} + +static inline void enable_atl_transfers(struct isp1362_hcd *isp1362_hcd, int count) +{ + if (count > 0) { + if (count < isp1362_hcd->atl_queue.ptd_count) + isp1362_write_reg16(isp1362_hcd, HCATLDTC, count); + isp1362_enable_int(isp1362_hcd, HCuPINT_ATL); + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, isp1362_hcd->atl_queue.skip_map); + isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE); + } else + isp1362_enable_int(isp1362_hcd, HCuPINT_SOF); +} + +static inline void enable_intl_transfers(struct isp1362_hcd *isp1362_hcd) +{ + isp1362_enable_int(isp1362_hcd, HCuPINT_INTL); + isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE); + isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, isp1362_hcd->intl_queue.skip_map); +} + +static inline void enable_istl_transfers(struct isp1362_hcd *isp1362_hcd, int flip) +{ + isp1362_enable_int(isp1362_hcd, flip ? HCuPINT_ISTL1 : HCuPINT_ISTL0); + isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, flip ? + HCBUFSTAT_ISTL1_FULL : HCBUFSTAT_ISTL0_FULL); +} + +static int submit_req(struct isp1362_hcd *isp1362_hcd, struct urb *urb, + struct isp1362_ep *ep, struct isp1362_ep_queue *epq) +{ + int index = epq->free_ptd; + + prepare_ptd(isp1362_hcd, urb, ep, epq, 0); + index = claim_ptd_buffers(epq, ep, ep->length); + if (index == -ENOMEM) { + DBG(1, "%s: req %d No free %s PTD available: %d, %08lx:%08lx\n", __func__, + ep->num_req, epq->name, ep->num_ptds, epq->buf_map, epq->skip_map); + return index; + } else if (index == -EOVERFLOW) { + DBG(1, "%s: req %d Not enough space for %d byte %s PTD %d %08lx:%08lx\n", + __func__, ep->num_req, ep->length, epq->name, ep->num_ptds, + epq->buf_map, epq->skip_map); + return index; + } else + BUG_ON(index < 0); + list_add_tail(&ep->active, &epq->active); + DBG(1, "%s: ep %p req %d len %d added to active list %p\n", __func__, + ep, ep->num_req, ep->length, &epq->active); + DBG(1, "%s: Submitting %s PTD $%04x for ep %p req %d\n", __func__, epq->name, + ep->ptd_offset, ep, ep->num_req); + isp1362_write_ptd(isp1362_hcd, ep, epq); + __clear_bit(ep->ptd_index, &epq->skip_map); + + return 0; +} + +static void start_atl_transfers(struct isp1362_hcd *isp1362_hcd) +{ + int ptd_count = 0; + struct isp1362_ep_queue *epq = &isp1362_hcd->atl_queue; + struct isp1362_ep *ep; + int defer = 0; + + if (atomic_read(&epq->finishing)) { + DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name); + return; + } + + list_for_each_entry(ep, &isp1362_hcd->async, schedule) { + struct urb *urb = get_urb(ep); + int ret; + + if (!list_empty(&ep->active)) { + DBG(2, "%s: Skipping active %s ep %p\n", __func__, epq->name, ep); + continue; + } + + DBG(1, "%s: Processing %s ep %p req %d\n", __func__, epq->name, + ep, ep->num_req); + + ret = submit_req(isp1362_hcd, urb, ep, epq); + if (ret == -ENOMEM) { + defer = 1; + break; + } else if (ret == -EOVERFLOW) { + defer = 1; + continue; + } +#ifdef BUGGY_PXA2XX_UDC_USBTEST + defer = ep->nextpid == USB_PID_SETUP; +#endif + ptd_count++; + } + + /* Avoid starving of endpoints */ + if (isp1362_hcd->async.next != isp1362_hcd->async.prev) { + DBG(2, "%s: Cycling ASYNC schedule %d\n", __func__, ptd_count); + list_move(&isp1362_hcd->async, isp1362_hcd->async.next); + } + if (ptd_count || defer) + enable_atl_transfers(isp1362_hcd, defer ? 0 : ptd_count); + + epq->ptd_count += ptd_count; + if (epq->ptd_count > epq->stat_maxptds) { + epq->stat_maxptds = epq->ptd_count; + DBG(0, "%s: max_ptds: %d\n", __func__, epq->stat_maxptds); + } +} + +static void start_intl_transfers(struct isp1362_hcd *isp1362_hcd) +{ + int ptd_count = 0; + struct isp1362_ep_queue *epq = &isp1362_hcd->intl_queue; + struct isp1362_ep *ep; + + if (atomic_read(&epq->finishing)) { + DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name); + return; + } + + list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) { + struct urb *urb = get_urb(ep); + int ret; + + if (!list_empty(&ep->active)) { + DBG(1, "%s: Skipping active %s ep %p\n", __func__, + epq->name, ep); + continue; + } + + DBG(1, "%s: Processing %s ep %p req %d\n", __func__, + epq->name, ep, ep->num_req); + ret = submit_req(isp1362_hcd, urb, ep, epq); + if (ret == -ENOMEM) + break; + else if (ret == -EOVERFLOW) + continue; + ptd_count++; + } + + if (ptd_count) { + static int last_count; + + if (ptd_count != last_count) { + DBG(0, "%s: ptd_count: %d\n", __func__, ptd_count); + last_count = ptd_count; + } + enable_intl_transfers(isp1362_hcd); + } + + epq->ptd_count += ptd_count; + if (epq->ptd_count > epq->stat_maxptds) + epq->stat_maxptds = epq->ptd_count; +} + +static inline int next_ptd(struct isp1362_ep_queue *epq, struct isp1362_ep *ep) +{ + u16 ptd_offset = ep->ptd_offset; + int num_ptds = (ep->length + PTD_HEADER_SIZE + (epq->blk_size - 1)) / epq->blk_size; + + DBG(2, "%s: PTD offset $%04x + %04x => %d * %04x -> $%04x\n", __func__, ptd_offset, + ep->length, num_ptds, epq->blk_size, ptd_offset + num_ptds * epq->blk_size); + + ptd_offset += num_ptds * epq->blk_size; + if (ptd_offset < epq->buf_start + epq->buf_size) + return ptd_offset; + else + return -ENOMEM; +} + +static void start_iso_transfers(struct isp1362_hcd *isp1362_hcd) +{ + int ptd_count = 0; + int flip = isp1362_hcd->istl_flip; + struct isp1362_ep_queue *epq; + int ptd_offset; + struct isp1362_ep *ep; + struct isp1362_ep *tmp; + u16 fno = isp1362_read_reg32(isp1362_hcd, HCFMNUM); + + fill2: + epq = &isp1362_hcd->istl_queue[flip]; + if (atomic_read(&epq->finishing)) { + DBG(1, "%s: finish_transfers is active for %s\n", __func__, epq->name); + return; + } + + if (!list_empty(&epq->active)) + return; + + ptd_offset = epq->buf_start; + list_for_each_entry_safe(ep, tmp, &isp1362_hcd->isoc, schedule) { + struct urb *urb = get_urb(ep); + s16 diff = fno - (u16)urb->start_frame; + + DBG(1, "%s: Processing %s ep %p\n", __func__, epq->name, ep); + + if (diff > urb->number_of_packets) { + /* time frame for this URB has elapsed */ + finish_request(isp1362_hcd, ep, urb, -EOVERFLOW); + continue; + } else if (diff < -1) { + /* URB is not due in this frame or the next one. + * Comparing with '-1' instead of '0' accounts for double + * buffering in the ISP1362 which enables us to queue the PTD + * one frame ahead of time + */ + } else if (diff == -1) { + /* submit PTD's that are due in the next frame */ + prepare_ptd(isp1362_hcd, urb, ep, epq, fno); + if (ptd_offset + PTD_HEADER_SIZE + ep->length > + epq->buf_start + epq->buf_size) { + pr_err("%s: Not enough ISO buffer space for %d byte PTD\n", + __func__, ep->length); + continue; + } + ep->ptd_offset = ptd_offset; + list_add_tail(&ep->active, &epq->active); + + ptd_offset = next_ptd(epq, ep); + if (ptd_offset < 0) { + pr_warning("%s: req %d No more %s PTD buffers available\n", __func__, + ep->num_req, epq->name); + break; + } + } + } + list_for_each_entry(ep, &epq->active, active) { + if (epq->active.next == &ep->active) + ep->ptd.mps |= PTD_LAST_MSK; + isp1362_write_ptd(isp1362_hcd, ep, epq); + ptd_count++; + } + + if (ptd_count) + enable_istl_transfers(isp1362_hcd, flip); + + epq->ptd_count += ptd_count; + if (epq->ptd_count > epq->stat_maxptds) + epq->stat_maxptds = epq->ptd_count; + + /* check, whether the second ISTL buffer may also be filled */ + if (!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) & + (flip ? HCBUFSTAT_ISTL0_FULL : HCBUFSTAT_ISTL1_FULL))) { + fno++; + ptd_count = 0; + flip = 1 - flip; + goto fill2; + } +} + +static void finish_transfers(struct isp1362_hcd *isp1362_hcd, unsigned long done_map, + struct isp1362_ep_queue *epq) +{ + struct isp1362_ep *ep; + struct isp1362_ep *tmp; + + if (list_empty(&epq->active)) { + DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name); + return; + } + + DBG(1, "%s: Finishing %s transfers %08lx\n", __func__, epq->name, done_map); + + atomic_inc(&epq->finishing); + list_for_each_entry_safe(ep, tmp, &epq->active, active) { + int index = ep->ptd_index; + + DBG(1, "%s: Checking %s PTD[%02x] $%04x\n", __func__, epq->name, + index, ep->ptd_offset); + + BUG_ON(index < 0); + if (__test_and_clear_bit(index, &done_map)) { + isp1362_read_ptd(isp1362_hcd, ep, epq); + epq->free_ptd = index; + BUG_ON(ep->num_ptds == 0); + release_ptd_buffers(epq, ep); + + DBG(1, "%s: ep %p req %d removed from active list\n", __func__, + ep, ep->num_req); + if (!list_empty(&ep->remove_list)) { + list_del_init(&ep->remove_list); + DBG(1, "%s: ep %p removed from remove list\n", __func__, ep); + } + DBG(1, "%s: Postprocessing %s ep %p req %d\n", __func__, epq->name, + ep, ep->num_req); + postproc_ep(isp1362_hcd, ep); + } + if (!done_map) + break; + } + if (done_map) + pr_warning("%s: done_map not clear: %08lx:%08lx\n", __func__, done_map, + epq->skip_map); + atomic_dec(&epq->finishing); +} + +static void finish_iso_transfers(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep_queue *epq) +{ + struct isp1362_ep *ep; + struct isp1362_ep *tmp; + + if (list_empty(&epq->active)) { + DBG(1, "%s: Nothing to do for %s queue\n", __func__, epq->name); + return; + } + + DBG(1, "%s: Finishing %s transfers\n", __func__, epq->name); + + atomic_inc(&epq->finishing); + list_for_each_entry_safe(ep, tmp, &epq->active, active) { + DBG(1, "%s: Checking PTD $%04x\n", __func__, ep->ptd_offset); + + isp1362_read_ptd(isp1362_hcd, ep, epq); + DBG(1, "%s: Postprocessing %s ep %p\n", __func__, epq->name, ep); + postproc_ep(isp1362_hcd, ep); + } + WARN_ON(epq->blk_size != 0); + atomic_dec(&epq->finishing); +} + +static irqreturn_t isp1362_irq(struct usb_hcd *hcd) +{ + int handled = 0; + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + u16 irqstat; + u16 svc_mask; + + spin_lock(&isp1362_hcd->lock); + + BUG_ON(isp1362_hcd->irq_active++); + + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0); + + irqstat = isp1362_read_reg16(isp1362_hcd, HCuPINT); + DBG(3, "%s: got IRQ %04x:%04x\n", __func__, irqstat, isp1362_hcd->irqenb); + + /* only handle interrupts that are currently enabled */ + irqstat &= isp1362_hcd->irqenb; + isp1362_write_reg16(isp1362_hcd, HCuPINT, irqstat); + svc_mask = irqstat; + + if (irqstat & HCuPINT_SOF) { + isp1362_hcd->irqenb &= ~HCuPINT_SOF; + isp1362_hcd->irq_stat[ISP1362_INT_SOF]++; + handled = 1; + svc_mask &= ~HCuPINT_SOF; + DBG(3, "%s: SOF\n", __func__); + isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM); + if (!list_empty(&isp1362_hcd->remove_list)) + finish_unlinks(isp1362_hcd); + if (!list_empty(&isp1362_hcd->async) && !(irqstat & HCuPINT_ATL)) { + if (list_empty(&isp1362_hcd->atl_queue.active)) { + start_atl_transfers(isp1362_hcd); + } else { + isp1362_enable_int(isp1362_hcd, HCuPINT_ATL); + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, + isp1362_hcd->atl_queue.skip_map); + isp1362_set_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE); + } + } + } + + if (irqstat & HCuPINT_ISTL0) { + isp1362_hcd->irq_stat[ISP1362_INT_ISTL0]++; + handled = 1; + svc_mask &= ~HCuPINT_ISTL0; + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL0_FULL); + DBG(1, "%s: ISTL0\n", __func__); + WARN_ON((int)!!isp1362_hcd->istl_flip); + WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) & + HCBUFSTAT_ISTL0_ACTIVE); + WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) & + HCBUFSTAT_ISTL0_DONE)); + isp1362_hcd->irqenb &= ~HCuPINT_ISTL0; + } + + if (irqstat & HCuPINT_ISTL1) { + isp1362_hcd->irq_stat[ISP1362_INT_ISTL1]++; + handled = 1; + svc_mask &= ~HCuPINT_ISTL1; + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ISTL1_FULL); + DBG(1, "%s: ISTL1\n", __func__); + WARN_ON(!(int)isp1362_hcd->istl_flip); + WARN_ON(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) & + HCBUFSTAT_ISTL1_ACTIVE); + WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCBUFSTAT) & + HCBUFSTAT_ISTL1_DONE)); + isp1362_hcd->irqenb &= ~HCuPINT_ISTL1; + } + + if (irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) { + WARN_ON((irqstat & (HCuPINT_ISTL0 | HCuPINT_ISTL1)) == + (HCuPINT_ISTL0 | HCuPINT_ISTL1)); + finish_iso_transfers(isp1362_hcd, + &isp1362_hcd->istl_queue[isp1362_hcd->istl_flip]); + start_iso_transfers(isp1362_hcd); + isp1362_hcd->istl_flip = 1 - isp1362_hcd->istl_flip; + } + + if (irqstat & HCuPINT_INTL) { + u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE); + u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCINTLSKIP); + isp1362_hcd->irq_stat[ISP1362_INT_INTL]++; + + DBG(2, "%s: INTL\n", __func__); + + svc_mask &= ~HCuPINT_INTL; + + isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, skip_map | done_map); + if (~(done_map | skip_map) == 0) + /* All PTDs are finished, disable INTL processing entirely */ + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_INTL_ACTIVE); + + handled = 1; + WARN_ON(!done_map); + if (done_map) { + DBG(3, "%s: INTL done_map %08x\n", __func__, done_map); + finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue); + start_intl_transfers(isp1362_hcd); + } + } + + if (irqstat & HCuPINT_ATL) { + u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE); + u32 skip_map = isp1362_read_reg32(isp1362_hcd, HCATLSKIP); + isp1362_hcd->irq_stat[ISP1362_INT_ATL]++; + + DBG(2, "%s: ATL\n", __func__); + + svc_mask &= ~HCuPINT_ATL; + + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, skip_map | done_map); + if (~(done_map | skip_map) == 0) + isp1362_clr_mask16(isp1362_hcd, HCBUFSTAT, HCBUFSTAT_ATL_ACTIVE); + if (done_map) { + DBG(3, "%s: ATL done_map %08x\n", __func__, done_map); + finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue); + start_atl_transfers(isp1362_hcd); + } + handled = 1; + } + + if (irqstat & HCuPINT_OPR) { + u32 intstat = isp1362_read_reg32(isp1362_hcd, HCINTSTAT); + isp1362_hcd->irq_stat[ISP1362_INT_OPR]++; + + svc_mask &= ~HCuPINT_OPR; + DBG(2, "%s: OPR %08x:%08x\n", __func__, intstat, isp1362_hcd->intenb); + intstat &= isp1362_hcd->intenb; + if (intstat & OHCI_INTR_UE) { + pr_err("Unrecoverable error\n"); + /* FIXME: do here reset or cleanup or whatever */ + } + if (intstat & OHCI_INTR_RHSC) { + isp1362_hcd->rhstatus = isp1362_read_reg32(isp1362_hcd, HCRHSTATUS); + isp1362_hcd->rhport[0] = isp1362_read_reg32(isp1362_hcd, HCRHPORT1); + isp1362_hcd->rhport[1] = isp1362_read_reg32(isp1362_hcd, HCRHPORT2); + } + if (intstat & OHCI_INTR_RD) { + pr_info("%s: RESUME DETECTED\n", __func__); + isp1362_show_reg(isp1362_hcd, HCCONTROL); + usb_hcd_resume_root_hub(hcd); + } + isp1362_write_reg32(isp1362_hcd, HCINTSTAT, intstat); + irqstat &= ~HCuPINT_OPR; + handled = 1; + } + + if (irqstat & HCuPINT_SUSP) { + isp1362_hcd->irq_stat[ISP1362_INT_SUSP]++; + handled = 1; + svc_mask &= ~HCuPINT_SUSP; + + pr_info("%s: SUSPEND IRQ\n", __func__); + } + + if (irqstat & HCuPINT_CLKRDY) { + isp1362_hcd->irq_stat[ISP1362_INT_CLKRDY]++; + handled = 1; + isp1362_hcd->irqenb &= ~HCuPINT_CLKRDY; + svc_mask &= ~HCuPINT_CLKRDY; + pr_info("%s: CLKRDY IRQ\n", __func__); + } + + if (svc_mask) + pr_err("%s: Unserviced interrupt(s) %04x\n", __func__, svc_mask); + + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb); + isp1362_hcd->irq_active--; + spin_unlock(&isp1362_hcd->lock); + + return IRQ_RETVAL(handled); +} + +/*-------------------------------------------------------------------------*/ + +#define MAX_PERIODIC_LOAD 900 /* out of 1000 usec */ +static int balance(struct isp1362_hcd *isp1362_hcd, u16 interval, u16 load) +{ + int i, branch = -ENOSPC; + + /* search for the least loaded schedule branch of that interval + * which has enough bandwidth left unreserved. + */ + for (i = 0; i < interval; i++) { + if (branch < 0 || isp1362_hcd->load[branch] > isp1362_hcd->load[i]) { + int j; + + for (j = i; j < PERIODIC_SIZE; j += interval) { + if ((isp1362_hcd->load[j] + load) > MAX_PERIODIC_LOAD) { + pr_err("%s: new load %d load[%02x] %d max %d\n", __func__, + load, j, isp1362_hcd->load[j], MAX_PERIODIC_LOAD); + break; + } + } + if (j < PERIODIC_SIZE) + continue; + branch = i; + } + } + return branch; +} + +/* NB! ALL the code above this point runs with isp1362_hcd->lock + held, irqs off +*/ + +/*-------------------------------------------------------------------------*/ + +static int isp1362_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + struct usb_device *udev = urb->dev; + unsigned int pipe = urb->pipe; + int is_out = !usb_pipein(pipe); + int type = usb_pipetype(pipe); + int epnum = usb_pipeendpoint(pipe); + struct usb_host_endpoint *hep = urb->ep; + struct isp1362_ep *ep = NULL; + unsigned long flags; + int retval = 0; + + DBG(3, "%s: urb %p\n", __func__, urb); + + if (type == PIPE_ISOCHRONOUS) { + pr_err("Isochronous transfers not supported\n"); + return -ENOSPC; + } + + URB_DBG("%s: FA %d ep%d%s %s: len %d %s%s\n", __func__, + usb_pipedevice(pipe), epnum, + is_out ? "out" : "in", + usb_pipecontrol(pipe) ? "ctrl" : + usb_pipeint(pipe) ? "int" : + usb_pipebulk(pipe) ? "bulk" : + "iso", + urb->transfer_buffer_length, + (urb->transfer_flags & URB_ZERO_PACKET) ? "ZERO_PACKET " : "", + !(urb->transfer_flags & URB_SHORT_NOT_OK) ? + "short_ok" : ""); + + /* avoid all allocations within spinlocks: request or endpoint */ + if (!hep->hcpriv) { + ep = kcalloc(1, sizeof *ep, mem_flags); + if (!ep) + return -ENOMEM; + } + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + /* don't submit to a dead or disabled port */ + if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) & + (1 << USB_PORT_FEAT_ENABLE)) || + !HC_IS_RUNNING(hcd->state)) { + kfree(ep); + retval = -ENODEV; + goto fail_not_linked; + } + + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) { + kfree(ep); + goto fail_not_linked; + } + + if (hep->hcpriv) { + ep = hep->hcpriv; + } else { + INIT_LIST_HEAD(&ep->schedule); + INIT_LIST_HEAD(&ep->active); + INIT_LIST_HEAD(&ep->remove_list); + ep->udev = usb_get_dev(udev); + ep->hep = hep; + ep->epnum = epnum; + ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out); + ep->ptd_offset = -EINVAL; + ep->ptd_index = -EINVAL; + usb_settoggle(udev, epnum, is_out, 0); + + if (type == PIPE_CONTROL) + ep->nextpid = USB_PID_SETUP; + else if (is_out) + ep->nextpid = USB_PID_OUT; + else + ep->nextpid = USB_PID_IN; + + switch (type) { + case PIPE_ISOCHRONOUS: + case PIPE_INTERRUPT: + if (urb->interval > PERIODIC_SIZE) + urb->interval = PERIODIC_SIZE; + ep->interval = urb->interval; + ep->branch = PERIODIC_SIZE; + ep->load = usb_calc_bus_time(udev->speed, !is_out, + (type == PIPE_ISOCHRONOUS), + usb_maxpacket(udev, pipe, is_out)) / 1000; + break; + } + hep->hcpriv = ep; + } + ep->num_req = isp1362_hcd->req_serial++; + + /* maybe put endpoint into schedule */ + switch (type) { + case PIPE_CONTROL: + case PIPE_BULK: + if (list_empty(&ep->schedule)) { + DBG(1, "%s: Adding ep %p req %d to async schedule\n", + __func__, ep, ep->num_req); + list_add_tail(&ep->schedule, &isp1362_hcd->async); + } + break; + case PIPE_ISOCHRONOUS: + case PIPE_INTERRUPT: + urb->interval = ep->interval; + + /* urb submitted for already existing EP */ + if (ep->branch < PERIODIC_SIZE) + break; + + retval = balance(isp1362_hcd, ep->interval, ep->load); + if (retval < 0) { + pr_err("%s: balance returned %d\n", __func__, retval); + goto fail; + } + ep->branch = retval; + retval = 0; + isp1362_hcd->fmindex = isp1362_read_reg32(isp1362_hcd, HCFMNUM); + DBG(1, "%s: Current frame %04x branch %02x start_frame %04x(%04x)\n", + __func__, isp1362_hcd->fmindex, ep->branch, + ((isp1362_hcd->fmindex + PERIODIC_SIZE - 1) & + ~(PERIODIC_SIZE - 1)) + ep->branch, + (isp1362_hcd->fmindex & (PERIODIC_SIZE - 1)) + ep->branch); + + if (list_empty(&ep->schedule)) { + if (type == PIPE_ISOCHRONOUS) { + u16 frame = isp1362_hcd->fmindex; + + frame += max_t(u16, 8, ep->interval); + frame &= ~(ep->interval - 1); + frame |= ep->branch; + if (frame_before(frame, isp1362_hcd->fmindex)) + frame += ep->interval; + urb->start_frame = frame; + + DBG(1, "%s: Adding ep %p to isoc schedule\n", __func__, ep); + list_add_tail(&ep->schedule, &isp1362_hcd->isoc); + } else { + DBG(1, "%s: Adding ep %p to periodic schedule\n", __func__, ep); + list_add_tail(&ep->schedule, &isp1362_hcd->periodic); + } + } else + DBG(1, "%s: ep %p already scheduled\n", __func__, ep); + + DBG(2, "%s: load %d bandwidth %d -> %d\n", __func__, + ep->load / ep->interval, isp1362_hcd->load[ep->branch], + isp1362_hcd->load[ep->branch] + ep->load); + isp1362_hcd->load[ep->branch] += ep->load; + } + + urb->hcpriv = hep; + ALIGNSTAT(isp1362_hcd, urb->transfer_buffer); + + switch (type) { + case PIPE_CONTROL: + case PIPE_BULK: + start_atl_transfers(isp1362_hcd); + break; + case PIPE_INTERRUPT: + start_intl_transfers(isp1362_hcd); + break; + case PIPE_ISOCHRONOUS: + start_iso_transfers(isp1362_hcd); + break; + default: + BUG(); + } + fail: + if (retval) + usb_hcd_unlink_urb_from_ep(hcd, urb); + + + fail_not_linked: + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (retval) + DBG(0, "%s: urb %p failed with %d\n", __func__, urb, retval); + return retval; +} + +static int isp1362_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + struct usb_host_endpoint *hep; + unsigned long flags; + struct isp1362_ep *ep; + int retval = 0; + + DBG(3, "%s: urb %p\n", __func__, urb); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + retval = usb_hcd_check_unlink_urb(hcd, urb, status); + if (retval) + goto done; + + hep = urb->hcpriv; + + if (!hep) { + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + return -EIDRM; + } + + ep = hep->hcpriv; + if (ep) { + /* In front of queue? */ + if (ep->hep->urb_list.next == &urb->urb_list) { + if (!list_empty(&ep->active)) { + DBG(1, "%s: urb %p ep %p req %d active PTD[%d] $%04x\n", __func__, + urb, ep, ep->num_req, ep->ptd_index, ep->ptd_offset); + /* disable processing and queue PTD for removal */ + remove_ptd(isp1362_hcd, ep); + urb = NULL; + } + } + if (urb) { + DBG(1, "%s: Finishing ep %p req %d\n", __func__, ep, + ep->num_req); + finish_request(isp1362_hcd, ep, urb, status); + } else + DBG(1, "%s: urb %p active; wait4irq\n", __func__, urb); + } else { + pr_warning("%s: No EP in URB %p\n", __func__, urb); + retval = -EINVAL; + } +done: + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + DBG(3, "%s: exit\n", __func__); + + return retval; +} + +static void isp1362_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) +{ + struct isp1362_ep *ep = hep->hcpriv; + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + + DBG(1, "%s: ep %p\n", __func__, ep); + if (!ep) + return; + spin_lock_irqsave(&isp1362_hcd->lock, flags); + if (!list_empty(&hep->urb_list)) { + if (!list_empty(&ep->active) && list_empty(&ep->remove_list)) { + DBG(1, "%s: Removing ep %p req %d PTD[%d] $%04x\n", __func__, + ep, ep->num_req, ep->ptd_index, ep->ptd_offset); + remove_ptd(isp1362_hcd, ep); + pr_info("%s: Waiting for Interrupt to clean up\n", __func__); + } + } + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + /* Wait for interrupt to clear out active list */ + while (!list_empty(&ep->active)) + msleep(1); + + DBG(1, "%s: Freeing EP %p\n", __func__, ep); + + usb_put_dev(ep->udev); + kfree(ep); + hep->hcpriv = NULL; +} + +static int isp1362_get_frame(struct usb_hcd *hcd) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + u32 fmnum; + unsigned long flags; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + fmnum = isp1362_read_reg32(isp1362_hcd, HCFMNUM); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + return (int)fmnum; +} + +/*-------------------------------------------------------------------------*/ + +/* Adapted from ohci-hub.c */ +static int isp1362_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + int ports, i, changed = 0; + unsigned long flags; + + if (!HC_IS_RUNNING(hcd->state)) + return -ESHUTDOWN; + + /* Report no status change now, if we are scheduled to be + called later */ + if (timer_pending(&hcd->rh_timer)) + return 0; + + ports = isp1362_hcd->rhdesca & RH_A_NDP; + BUG_ON(ports > 2); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + /* init status */ + if (isp1362_hcd->rhstatus & (RH_HS_LPSC | RH_HS_OCIC)) + buf[0] = changed = 1; + else + buf[0] = 0; + + for (i = 0; i < ports; i++) { + u32 status = isp1362_hcd->rhport[i]; + + if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC | + RH_PS_OCIC | RH_PS_PRSC)) { + changed = 1; + buf[0] |= 1 << (i + 1); + continue; + } + + if (!(status & RH_PS_CCS)) + continue; + } + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + return changed; +} + +static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, + struct usb_hub_descriptor *desc) +{ + u32 reg = isp1362_hcd->rhdesca; + + DBG(3, "%s: enter\n", __func__); + + desc->bDescriptorType = 0x29; + desc->bDescLength = 9; + desc->bHubContrCurrent = 0; + desc->bNbrPorts = reg & 0x3; + /* Power switching, device type, overcurrent. */ + desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f); + DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f)); + desc->bPwrOn2PwrGood = (reg >> 24) & 0xff; + /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ + desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; + desc->bitmap[1] = ~0; + + DBG(3, "%s: exit\n", __func__); +} + +/* Adapted from ohci-hub.c */ +static int isp1362_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + int retval = 0; + unsigned long flags; + unsigned long t1; + int ports = isp1362_hcd->rhdesca & RH_A_NDP; + u32 tmp = 0; + + switch (typeReq) { + case ClearHubFeature: + DBG(0, "ClearHubFeature: "); + switch (wValue) { + case C_HUB_OVER_CURRENT: + _DBG(0, "C_HUB_OVER_CURRENT\n"); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_OCIC); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + case C_HUB_LOCAL_POWER: + _DBG(0, "C_HUB_LOCAL_POWER\n"); + break; + default: + goto error; + } + break; + case SetHubFeature: + DBG(0, "SetHubFeature: "); + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + _DBG(0, "C_HUB_OVER_CURRENT or C_HUB_LOCAL_POWER\n"); + break; + default: + goto error; + } + break; + case GetHubDescriptor: + DBG(0, "GetHubDescriptor\n"); + isp1362_hub_descriptor(isp1362_hcd, (struct usb_hub_descriptor *)buf); + break; + case GetHubStatus: + DBG(0, "GetHubStatus\n"); + put_unaligned(cpu_to_le32(0), (__le32 *) buf); + break; + case GetPortStatus: +#ifndef VERBOSE + DBG(0, "GetPortStatus\n"); +#endif + if (!wIndex || wIndex > ports) + goto error; + tmp = isp1362_hcd->rhport[--wIndex]; + put_unaligned(cpu_to_le32(tmp), (__le32 *) buf); + break; + case ClearPortFeature: + DBG(0, "ClearPortFeature: "); + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + _DBG(0, "USB_PORT_FEAT_ENABLE\n"); + tmp = RH_PS_CCS; + break; + case USB_PORT_FEAT_C_ENABLE: + _DBG(0, "USB_PORT_FEAT_C_ENABLE\n"); + tmp = RH_PS_PESC; + break; + case USB_PORT_FEAT_SUSPEND: + _DBG(0, "USB_PORT_FEAT_SUSPEND\n"); + tmp = RH_PS_POCI; + break; + case USB_PORT_FEAT_C_SUSPEND: + _DBG(0, "USB_PORT_FEAT_C_SUSPEND\n"); + tmp = RH_PS_PSSC; + break; + case USB_PORT_FEAT_POWER: + _DBG(0, "USB_PORT_FEAT_POWER\n"); + tmp = RH_PS_LSDA; + + break; + case USB_PORT_FEAT_C_CONNECTION: + _DBG(0, "USB_PORT_FEAT_C_CONNECTION\n"); + tmp = RH_PS_CSC; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + _DBG(0, "USB_PORT_FEAT_C_OVER_CURRENT\n"); + tmp = RH_PS_OCIC; + break; + case USB_PORT_FEAT_C_RESET: + _DBG(0, "USB_PORT_FEAT_C_RESET\n"); + tmp = RH_PS_PRSC; + break; + default: + goto error; + } + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, tmp); + isp1362_hcd->rhport[wIndex] = + isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + break; + case SetPortFeature: + DBG(0, "SetPortFeature: "); + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + _DBG(0, "USB_PORT_FEAT_SUSPEND\n"); +#ifdef CONFIG_USB_OTG + if (ohci->hcd.self.otg_port == (wIndex + 1) && + ohci->hcd.self.b_hnp_enable) { + start_hnp(ohci); + break; + } +#endif + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PSS); + isp1362_hcd->rhport[wIndex] = + isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + break; + case USB_PORT_FEAT_POWER: + _DBG(0, "USB_PORT_FEAT_POWER\n"); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, RH_PS_PPS); + isp1362_hcd->rhport[wIndex] = + isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + break; + case USB_PORT_FEAT_RESET: + _DBG(0, "USB_PORT_FEAT_RESET\n"); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + t1 = jiffies + msecs_to_jiffies(USB_RESET_WIDTH); + while (time_before(jiffies, t1)) { + /* spin until any current reset finishes */ + for (;;) { + tmp = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + wIndex); + if (!(tmp & RH_PS_PRS)) + break; + udelay(500); + } + if (!(tmp & RH_PS_CCS)) + break; + /* Reset lasts 10ms (claims datasheet) */ + isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + wIndex, (RH_PS_PRS)); + + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + msleep(10); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + } + + isp1362_hcd->rhport[wIndex] = isp1362_read_reg32(isp1362_hcd, + HCRHPORT1 + wIndex); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + break; + default: + goto error; + } + break; + + default: + error: + /* "protocol stall" on error */ + _DBG(0, "PROTOCOL STALL\n"); + retval = -EPIPE; + } + + return retval; +} + +#ifdef CONFIG_PM +static int isp1362_bus_suspend(struct usb_hcd *hcd) +{ + int status = 0; + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + + if (time_before(jiffies, isp1362_hcd->next_statechange)) + msleep(5); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL); + switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_RESUME: + DBG(0, "%s: resume/suspend?\n", __func__); + isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS; + isp1362_hcd->hc_control |= OHCI_USB_RESET; + isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control); + /* FALL THROUGH */ + case OHCI_USB_RESET: + status = -EBUSY; + pr_warning("%s: needs reinit!\n", __func__); + goto done; + case OHCI_USB_SUSPEND: + pr_warning("%s: already suspended?\n", __func__); + goto done; + } + DBG(0, "%s: suspend root hub\n", __func__); + + /* First stop any processing */ + hcd->state = HC_STATE_QUIESCING; + if (!list_empty(&isp1362_hcd->atl_queue.active) || + !list_empty(&isp1362_hcd->intl_queue.active) || + !list_empty(&isp1362_hcd->istl_queue[0] .active) || + !list_empty(&isp1362_hcd->istl_queue[1] .active)) { + int limit; + + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0); + isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0); + isp1362_write_reg16(isp1362_hcd, HCBUFSTAT, 0); + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0); + isp1362_write_reg32(isp1362_hcd, HCINTSTAT, OHCI_INTR_SF); + + DBG(0, "%s: stopping schedules ...\n", __func__); + limit = 2000; + while (limit > 0) { + udelay(250); + limit -= 250; + if (isp1362_read_reg32(isp1362_hcd, HCINTSTAT) & OHCI_INTR_SF) + break; + } + mdelay(7); + if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ATL) { + u32 done_map = isp1362_read_reg32(isp1362_hcd, HCATLDONE); + finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->atl_queue); + } + if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_INTL) { + u32 done_map = isp1362_read_reg32(isp1362_hcd, HCINTLDONE); + finish_transfers(isp1362_hcd, done_map, &isp1362_hcd->intl_queue); + } + if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL0) + finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[0]); + if (isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_ISTL1) + finish_iso_transfers(isp1362_hcd, &isp1362_hcd->istl_queue[1]); + } + DBG(0, "%s: HCINTSTAT: %08x\n", __func__, + isp1362_read_reg32(isp1362_hcd, HCINTSTAT)); + isp1362_write_reg32(isp1362_hcd, HCINTSTAT, + isp1362_read_reg32(isp1362_hcd, HCINTSTAT)); + + /* Suspend hub */ + isp1362_hcd->hc_control = OHCI_USB_SUSPEND; + isp1362_show_reg(isp1362_hcd, HCCONTROL); + isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control); + isp1362_show_reg(isp1362_hcd, HCCONTROL); + +#if 1 + isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL); + if ((isp1362_hcd->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_SUSPEND) { + pr_err("%s: controller won't suspend %08x\n", __func__, + isp1362_hcd->hc_control); + status = -EBUSY; + } else +#endif + { + /* no resumes until devices finish suspending */ + isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(5); + } +done: + if (status == 0) { + hcd->state = HC_STATE_SUSPENDED; + DBG(0, "%s: HCD suspended: %08x\n", __func__, + isp1362_read_reg32(isp1362_hcd, HCCONTROL)); + } + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + return status; +} + +static int isp1362_bus_resume(struct usb_hcd *hcd) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + u32 port; + unsigned long flags; + int status = -EINPROGRESS; + + if (time_before(jiffies, isp1362_hcd->next_statechange)) + msleep(5); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL); + pr_info("%s: HCCONTROL: %08x\n", __func__, isp1362_hcd->hc_control); + if (hcd->state == HC_STATE_RESUMING) { + pr_warning("%s: duplicate resume\n", __func__); + status = 0; + } else + switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_SUSPEND: + DBG(0, "%s: resume root hub\n", __func__); + isp1362_hcd->hc_control &= ~OHCI_CTRL_HCFS; + isp1362_hcd->hc_control |= OHCI_USB_RESUME; + isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control); + break; + case OHCI_USB_RESUME: + /* HCFS changes sometime after INTR_RD */ + DBG(0, "%s: remote wakeup\n", __func__); + break; + case OHCI_USB_OPER: + DBG(0, "%s: odd resume\n", __func__); + status = 0; + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + break; + default: /* RESET, we lost power */ + DBG(0, "%s: root hub hardware reset\n", __func__); + status = -EBUSY; + } + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (status == -EBUSY) { + DBG(0, "%s: Restarting HC\n", __func__); + isp1362_hc_stop(hcd); + return isp1362_hc_start(hcd); + } + if (status != -EINPROGRESS) + return status; + spin_lock_irqsave(&isp1362_hcd->lock, flags); + port = isp1362_read_reg32(isp1362_hcd, HCRHDESCA) & RH_A_NDP; + while (port--) { + u32 stat = isp1362_read_reg32(isp1362_hcd, HCRHPORT1 + port); + + /* force global, not selective, resume */ + if (!(stat & RH_PS_PSS)) { + DBG(0, "%s: Not Resuming RH port %d\n", __func__, port); + continue; + } + DBG(0, "%s: Resuming RH port %d\n", __func__, port); + isp1362_write_reg32(isp1362_hcd, HCRHPORT1 + port, RH_PS_POCI); + } + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + /* Some controllers (lucent) need extra-long delays */ + hcd->state = HC_STATE_RESUMING; + mdelay(20 /* usb 11.5.1.10 */ + 15); + + isp1362_hcd->hc_control = OHCI_USB_OPER; + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_show_reg(isp1362_hcd, HCCONTROL); + isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + /* TRSMRCY */ + msleep(10); + + /* keep it alive for ~5x suspend + resume costs */ + isp1362_hcd->next_statechange = jiffies + msecs_to_jiffies(250); + + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + hcd->state = HC_STATE_RUNNING; + return 0; +} +#else +#define isp1362_bus_suspend NULL +#define isp1362_bus_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +#ifdef STUB_DEBUG_FILE + +static inline void create_debug_file(struct isp1362_hcd *isp1362_hcd) +{ +} +static inline void remove_debug_file(struct isp1362_hcd *isp1362_hcd) +{ +} + +#else + +#include <linux/proc_fs.h> +#include <linux/seq_file.h> + +static void dump_irq(struct seq_file *s, char *label, u16 mask) +{ + seq_printf(s, "%-15s %04x%s%s%s%s%s%s\n", label, mask, + mask & HCuPINT_CLKRDY ? " clkrdy" : "", + mask & HCuPINT_SUSP ? " susp" : "", + mask & HCuPINT_OPR ? " opr" : "", + mask & HCuPINT_EOT ? " eot" : "", + mask & HCuPINT_ATL ? " atl" : "", + mask & HCuPINT_SOF ? " sof" : ""); +} + +static void dump_int(struct seq_file *s, char *label, u32 mask) +{ + seq_printf(s, "%-15s %08x%s%s%s%s%s%s%s\n", label, mask, + mask & OHCI_INTR_MIE ? " MIE" : "", + mask & OHCI_INTR_RHSC ? " rhsc" : "", + mask & OHCI_INTR_FNO ? " fno" : "", + mask & OHCI_INTR_UE ? " ue" : "", + mask & OHCI_INTR_RD ? " rd" : "", + mask & OHCI_INTR_SF ? " sof" : "", + mask & OHCI_INTR_SO ? " so" : ""); +} + +static void dump_ctrl(struct seq_file *s, char *label, u32 mask) +{ + seq_printf(s, "%-15s %08x%s%s%s\n", label, mask, + mask & OHCI_CTRL_RWC ? " rwc" : "", + mask & OHCI_CTRL_RWE ? " rwe" : "", + ({ + char *hcfs; + switch (mask & OHCI_CTRL_HCFS) { + case OHCI_USB_OPER: + hcfs = " oper"; + break; + case OHCI_USB_RESET: + hcfs = " reset"; + break; + case OHCI_USB_RESUME: + hcfs = " resume"; + break; + case OHCI_USB_SUSPEND: + hcfs = " suspend"; + break; + default: + hcfs = " ?"; + } + hcfs; + })); +} + +static void dump_regs(struct seq_file *s, struct isp1362_hcd *isp1362_hcd) +{ + seq_printf(s, "HCREVISION [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCREVISION), + isp1362_read_reg32(isp1362_hcd, HCREVISION)); + seq_printf(s, "HCCONTROL [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCONTROL), + isp1362_read_reg32(isp1362_hcd, HCCONTROL)); + seq_printf(s, "HCCMDSTAT [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCCMDSTAT), + isp1362_read_reg32(isp1362_hcd, HCCMDSTAT)); + seq_printf(s, "HCINTSTAT [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTSTAT), + isp1362_read_reg32(isp1362_hcd, HCINTSTAT)); + seq_printf(s, "HCINTENB [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTENB), + isp1362_read_reg32(isp1362_hcd, HCINTENB)); + seq_printf(s, "HCFMINTVL [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMINTVL), + isp1362_read_reg32(isp1362_hcd, HCFMINTVL)); + seq_printf(s, "HCFMREM [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMREM), + isp1362_read_reg32(isp1362_hcd, HCFMREM)); + seq_printf(s, "HCFMNUM [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCFMNUM), + isp1362_read_reg32(isp1362_hcd, HCFMNUM)); + seq_printf(s, "HCLSTHRESH [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCLSTHRESH), + isp1362_read_reg32(isp1362_hcd, HCLSTHRESH)); + seq_printf(s, "HCRHDESCA [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCA), + isp1362_read_reg32(isp1362_hcd, HCRHDESCA)); + seq_printf(s, "HCRHDESCB [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHDESCB), + isp1362_read_reg32(isp1362_hcd, HCRHDESCB)); + seq_printf(s, "HCRHSTATUS [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHSTATUS), + isp1362_read_reg32(isp1362_hcd, HCRHSTATUS)); + seq_printf(s, "HCRHPORT1 [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT1), + isp1362_read_reg32(isp1362_hcd, HCRHPORT1)); + seq_printf(s, "HCRHPORT2 [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCRHPORT2), + isp1362_read_reg32(isp1362_hcd, HCRHPORT2)); + seq_printf(s, "\n"); + seq_printf(s, "HCHWCFG [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCHWCFG), + isp1362_read_reg16(isp1362_hcd, HCHWCFG)); + seq_printf(s, "HCDMACFG [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCDMACFG), + isp1362_read_reg16(isp1362_hcd, HCDMACFG)); + seq_printf(s, "HCXFERCTR [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCXFERCTR), + isp1362_read_reg16(isp1362_hcd, HCXFERCTR)); + seq_printf(s, "HCuPINT [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINT), + isp1362_read_reg16(isp1362_hcd, HCuPINT)); + seq_printf(s, "HCuPINTENB [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCuPINTENB), + isp1362_read_reg16(isp1362_hcd, HCuPINTENB)); + seq_printf(s, "HCCHIPID [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCCHIPID), + isp1362_read_reg16(isp1362_hcd, HCCHIPID)); + seq_printf(s, "HCSCRATCH [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCSCRATCH), + isp1362_read_reg16(isp1362_hcd, HCSCRATCH)); + seq_printf(s, "HCBUFSTAT [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCBUFSTAT), + isp1362_read_reg16(isp1362_hcd, HCBUFSTAT)); + seq_printf(s, "HCDIRADDR [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCDIRADDR), + isp1362_read_reg32(isp1362_hcd, HCDIRADDR)); +#if 0 + seq_printf(s, "HCDIRDATA [%02x] %04x\n", ISP1362_REG_NO(HCDIRDATA), + isp1362_read_reg16(isp1362_hcd, HCDIRDATA)); +#endif + seq_printf(s, "HCISTLBUFSZ[%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLBUFSZ), + isp1362_read_reg16(isp1362_hcd, HCISTLBUFSZ)); + seq_printf(s, "HCISTLRATE [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCISTLRATE), + isp1362_read_reg16(isp1362_hcd, HCISTLRATE)); + seq_printf(s, "\n"); + seq_printf(s, "HCINTLBUFSZ[%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBUFSZ), + isp1362_read_reg16(isp1362_hcd, HCINTLBUFSZ)); + seq_printf(s, "HCINTLBLKSZ[%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLBLKSZ), + isp1362_read_reg16(isp1362_hcd, HCINTLBLKSZ)); + seq_printf(s, "HCINTLDONE [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLDONE), + isp1362_read_reg32(isp1362_hcd, HCINTLDONE)); + seq_printf(s, "HCINTLSKIP [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLSKIP), + isp1362_read_reg32(isp1362_hcd, HCINTLSKIP)); + seq_printf(s, "HCINTLLAST [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLLAST), + isp1362_read_reg32(isp1362_hcd, HCINTLLAST)); + seq_printf(s, "HCINTLCURR [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCINTLCURR), + isp1362_read_reg16(isp1362_hcd, HCINTLCURR)); + seq_printf(s, "\n"); + seq_printf(s, "HCATLBUFSZ [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBUFSZ), + isp1362_read_reg16(isp1362_hcd, HCATLBUFSZ)); + seq_printf(s, "HCATLBLKSZ [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLBLKSZ), + isp1362_read_reg16(isp1362_hcd, HCATLBLKSZ)); +#if 0 + seq_printf(s, "HCATLDONE [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDONE), + isp1362_read_reg32(isp1362_hcd, HCATLDONE)); +#endif + seq_printf(s, "HCATLSKIP [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLSKIP), + isp1362_read_reg32(isp1362_hcd, HCATLSKIP)); + seq_printf(s, "HCATLLAST [%02x] %08x\n", ISP1362_REG_NO(ISP1362_REG_HCATLLAST), + isp1362_read_reg32(isp1362_hcd, HCATLLAST)); + seq_printf(s, "HCATLCURR [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLCURR), + isp1362_read_reg16(isp1362_hcd, HCATLCURR)); + seq_printf(s, "\n"); + seq_printf(s, "HCATLDTC [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTC), + isp1362_read_reg16(isp1362_hcd, HCATLDTC)); + seq_printf(s, "HCATLDTCTO [%02x] %04x\n", ISP1362_REG_NO(ISP1362_REG_HCATLDTCTO), + isp1362_read_reg16(isp1362_hcd, HCATLDTCTO)); +} + +static int proc_isp1362_show(struct seq_file *s, void *unused) +{ + struct isp1362_hcd *isp1362_hcd = s->private; + struct isp1362_ep *ep; + int i; + + seq_printf(s, "%s\n%s version %s\n", + isp1362_hcd_to_hcd(isp1362_hcd)->product_desc, hcd_name, DRIVER_VERSION); + + /* collect statistics to help estimate potential win for + * DMA engines that care about alignment (PXA) + */ + seq_printf(s, "alignment: 16b/%ld 8b/%ld 4b/%ld 2b/%ld 1b/%ld\n", + isp1362_hcd->stat16, isp1362_hcd->stat8, isp1362_hcd->stat4, + isp1362_hcd->stat2, isp1362_hcd->stat1); + seq_printf(s, "max # ptds in ATL fifo: %d\n", isp1362_hcd->atl_queue.stat_maxptds); + seq_printf(s, "max # ptds in INTL fifo: %d\n", isp1362_hcd->intl_queue.stat_maxptds); + seq_printf(s, "max # ptds in ISTL fifo: %d\n", + max(isp1362_hcd->istl_queue[0] .stat_maxptds, + isp1362_hcd->istl_queue[1] .stat_maxptds)); + + /* FIXME: don't show the following in suspended state */ + spin_lock_irq(&isp1362_hcd->lock); + + dump_irq(s, "hc_irq_enable", isp1362_read_reg16(isp1362_hcd, HCuPINTENB)); + dump_irq(s, "hc_irq_status", isp1362_read_reg16(isp1362_hcd, HCuPINT)); + dump_int(s, "ohci_int_enable", isp1362_read_reg32(isp1362_hcd, HCINTENB)); + dump_int(s, "ohci_int_status", isp1362_read_reg32(isp1362_hcd, HCINTSTAT)); + dump_ctrl(s, "ohci_control", isp1362_read_reg32(isp1362_hcd, HCCONTROL)); + + for (i = 0; i < NUM_ISP1362_IRQS; i++) + if (isp1362_hcd->irq_stat[i]) + seq_printf(s, "%-15s: %d\n", + ISP1362_INT_NAME(i), isp1362_hcd->irq_stat[i]); + + dump_regs(s, isp1362_hcd); + list_for_each_entry(ep, &isp1362_hcd->async, schedule) { + struct urb *urb; + + seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, ep->epnum, + ({ + char *s; + switch (ep->nextpid) { + case USB_PID_IN: + s = "in"; + break; + case USB_PID_OUT: + s = "out"; + break; + case USB_PID_SETUP: + s = "setup"; + break; + case USB_PID_ACK: + s = "status"; + break; + default: + s = "?"; + break; + }; + s;}), ep->maxpacket) ; + list_for_each_entry(urb, &ep->hep->urb_list, urb_list) { + seq_printf(s, " urb%p, %d/%d\n", urb, + urb->actual_length, + urb->transfer_buffer_length); + } + } + if (!list_empty(&isp1362_hcd->async)) + seq_printf(s, "\n"); + dump_ptd_queue(&isp1362_hcd->atl_queue); + + seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE); + + list_for_each_entry(ep, &isp1362_hcd->periodic, schedule) { + seq_printf(s, "branch:%2d load:%3d PTD[%d] $%04x:\n", ep->branch, + isp1362_hcd->load[ep->branch], ep->ptd_index, ep->ptd_offset); + + seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n", + ep->interval, ep, + (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ", + ep->udev->devnum, ep->epnum, + (ep->epnum == 0) ? "" : + ((ep->nextpid == USB_PID_IN) ? + "in" : "out"), ep->maxpacket); + } + dump_ptd_queue(&isp1362_hcd->intl_queue); + + seq_printf(s, "ISO:\n"); + + list_for_each_entry(ep, &isp1362_hcd->isoc, schedule) { + seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n", + ep->interval, ep, + (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ", + ep->udev->devnum, ep->epnum, + (ep->epnum == 0) ? "" : + ((ep->nextpid == USB_PID_IN) ? + "in" : "out"), ep->maxpacket); + } + + spin_unlock_irq(&isp1362_hcd->lock); + seq_printf(s, "\n"); + + return 0; +} + +static int proc_isp1362_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_isp1362_show, PDE(inode)->data); +} + +static const struct file_operations proc_ops = { + .open = proc_isp1362_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* expect just one isp1362_hcd per system */ +static const char proc_filename[] = "driver/isp1362"; + +static void create_debug_file(struct isp1362_hcd *isp1362_hcd) +{ + struct proc_dir_entry *pde; + + pde = create_proc_entry(proc_filename, 0, NULL); + if (pde == NULL) { + pr_warning("%s: Failed to create debug file '%s'\n", __func__, proc_filename); + return; + } + + pde->proc_fops = &proc_ops; + pde->data = isp1362_hcd; + isp1362_hcd->pde = pde; +} + +static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) +{ + if (isp1362_hcd->pde) + remove_proc_entry(proc_filename, 0); +} + +#endif + +/*-------------------------------------------------------------------------*/ + +static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd) +{ + int tmp = 20; + unsigned long flags; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC); + isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR); + while (--tmp) { + mdelay(1); + if (!(isp1362_read_reg32(isp1362_hcd, HCCMDSTAT) & OHCI_HCR)) + break; + } + if (!tmp) + pr_err("Software reset timeout\n"); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); +} + +static int isp1362_mem_config(struct usb_hcd *hcd) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + u32 total; + u16 istl_size = ISP1362_ISTL_BUFSIZE; + u16 intl_blksize = ISP1362_INTL_BLKSIZE + PTD_HEADER_SIZE; + u16 intl_size = ISP1362_INTL_BUFFERS * intl_blksize; + u16 atl_blksize = ISP1362_ATL_BLKSIZE + PTD_HEADER_SIZE; + u16 atl_buffers = (ISP1362_BUF_SIZE - (istl_size + intl_size)) / atl_blksize; + u16 atl_size; + int i; + + WARN_ON(istl_size & 3); + WARN_ON(atl_blksize & 3); + WARN_ON(intl_blksize & 3); + WARN_ON(atl_blksize < PTD_HEADER_SIZE); + WARN_ON(intl_blksize < PTD_HEADER_SIZE); + + BUG_ON((unsigned)ISP1362_INTL_BUFFERS > 32); + if (atl_buffers > 32) + atl_buffers = 32; + atl_size = atl_buffers * atl_blksize; + total = atl_size + intl_size + istl_size; + dev_info(hcd->self.controller, "ISP1362 Memory usage:\n"); + dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n", + istl_size / 2, istl_size, 0, istl_size / 2); + dev_info(hcd->self.controller, " INTL: %4d * (%3u+8): %4d @ $%04x\n", + ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE, + intl_size, istl_size); + dev_info(hcd->self.controller, " ATL : %4d * (%3u+8): %4d @ $%04x\n", + atl_buffers, atl_blksize - PTD_HEADER_SIZE, + atl_size, istl_size + intl_size); + dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total, + ISP1362_BUF_SIZE - total); + + if (total > ISP1362_BUF_SIZE) { + dev_err(hcd->self.controller, "%s: Memory requested: %d, available %d\n", + __func__, total, ISP1362_BUF_SIZE); + return -ENOMEM; + } + + total = istl_size + intl_size + atl_size; + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + for (i = 0; i < 2; i++) { + isp1362_hcd->istl_queue[i].buf_start = i * istl_size / 2, + isp1362_hcd->istl_queue[i].buf_size = istl_size / 2; + isp1362_hcd->istl_queue[i].blk_size = 4; + INIT_LIST_HEAD(&isp1362_hcd->istl_queue[i].active); + snprintf(isp1362_hcd->istl_queue[i].name, + sizeof(isp1362_hcd->istl_queue[i].name), "ISTL%d", i); + DBG(3, "%s: %5s buf $%04x %d\n", __func__, + isp1362_hcd->istl_queue[i].name, + isp1362_hcd->istl_queue[i].buf_start, + isp1362_hcd->istl_queue[i].buf_size); + } + isp1362_write_reg16(isp1362_hcd, HCISTLBUFSZ, istl_size / 2); + + isp1362_hcd->intl_queue.buf_start = istl_size; + isp1362_hcd->intl_queue.buf_size = intl_size; + isp1362_hcd->intl_queue.buf_count = ISP1362_INTL_BUFFERS; + isp1362_hcd->intl_queue.blk_size = intl_blksize; + isp1362_hcd->intl_queue.buf_avail = isp1362_hcd->intl_queue.buf_count; + isp1362_hcd->intl_queue.skip_map = ~0; + INIT_LIST_HEAD(&isp1362_hcd->intl_queue.active); + + isp1362_write_reg16(isp1362_hcd, HCINTLBUFSZ, + isp1362_hcd->intl_queue.buf_size); + isp1362_write_reg16(isp1362_hcd, HCINTLBLKSZ, + isp1362_hcd->intl_queue.blk_size - PTD_HEADER_SIZE); + isp1362_write_reg32(isp1362_hcd, HCINTLSKIP, ~0); + isp1362_write_reg32(isp1362_hcd, HCINTLLAST, + 1 << (ISP1362_INTL_BUFFERS - 1)); + + isp1362_hcd->atl_queue.buf_start = istl_size + intl_size; + isp1362_hcd->atl_queue.buf_size = atl_size; + isp1362_hcd->atl_queue.buf_count = atl_buffers; + isp1362_hcd->atl_queue.blk_size = atl_blksize; + isp1362_hcd->atl_queue.buf_avail = isp1362_hcd->atl_queue.buf_count; + isp1362_hcd->atl_queue.skip_map = ~0; + INIT_LIST_HEAD(&isp1362_hcd->atl_queue.active); + + isp1362_write_reg16(isp1362_hcd, HCATLBUFSZ, + isp1362_hcd->atl_queue.buf_size); + isp1362_write_reg16(isp1362_hcd, HCATLBLKSZ, + isp1362_hcd->atl_queue.blk_size - PTD_HEADER_SIZE); + isp1362_write_reg32(isp1362_hcd, HCATLSKIP, ~0); + isp1362_write_reg32(isp1362_hcd, HCATLLAST, + 1 << (atl_buffers - 1)); + + snprintf(isp1362_hcd->atl_queue.name, + sizeof(isp1362_hcd->atl_queue.name), "ATL"); + snprintf(isp1362_hcd->intl_queue.name, + sizeof(isp1362_hcd->intl_queue.name), "INTL"); + DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__, + isp1362_hcd->intl_queue.name, + isp1362_hcd->intl_queue.buf_start, + ISP1362_INTL_BUFFERS, isp1362_hcd->intl_queue.blk_size, + isp1362_hcd->intl_queue.buf_size); + DBG(3, "%s: %5s buf $%04x %2d * %4d = %4d\n", __func__, + isp1362_hcd->atl_queue.name, + isp1362_hcd->atl_queue.buf_start, + atl_buffers, isp1362_hcd->atl_queue.blk_size, + isp1362_hcd->atl_queue.buf_size); + + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + return 0; +} + +static int isp1362_hc_reset(struct usb_hcd *hcd) +{ + int ret = 0; + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long t; + unsigned long timeout = 100; + unsigned long flags; + int clkrdy = 0; + + pr_info("%s:\n", __func__); + + if (isp1362_hcd->board && isp1362_hcd->board->reset) { + isp1362_hcd->board->reset(hcd->self.controller, 1); + msleep(20); + if (isp1362_hcd->board->clock) + isp1362_hcd->board->clock(hcd->self.controller, 1); + isp1362_hcd->board->reset(hcd->self.controller, 0); + } else + isp1362_sw_reset(isp1362_hcd); + + /* chip has been reset. First we need to see a clock */ + t = jiffies + msecs_to_jiffies(timeout); + while (!clkrdy && time_before_eq(jiffies, t)) { + spin_lock_irqsave(&isp1362_hcd->lock, flags); + clkrdy = isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_CLKRDY; + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (!clkrdy) + msleep(4); + } + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_CLKRDY); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (!clkrdy) { + pr_err("Clock not ready after %lums\n", timeout); + ret = -ENODEV; + } + return ret; +} + +static void isp1362_hc_stop(struct usb_hcd *hcd) +{ + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + u32 tmp; + + pr_info("%s:\n", __func__); + + del_timer_sync(&hcd->rh_timer); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0); + + /* Switch off power for all ports */ + tmp = isp1362_read_reg32(isp1362_hcd, HCRHDESCA); + tmp &= ~(RH_A_NPS | RH_A_PSM); + isp1362_write_reg32(isp1362_hcd, HCRHDESCA, tmp); + isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS); + + /* Reset the chip */ + if (isp1362_hcd->board && isp1362_hcd->board->reset) + isp1362_hcd->board->reset(hcd->self.controller, 1); + else + isp1362_sw_reset(isp1362_hcd); + + if (isp1362_hcd->board && isp1362_hcd->board->clock) + isp1362_hcd->board->clock(hcd->self.controller, 0); + + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); +} + +#ifdef CHIP_BUFFER_TEST +static int isp1362_chip_test(struct isp1362_hcd *isp1362_hcd) +{ + int ret = 0; + u16 *ref; + unsigned long flags; + + ref = kmalloc(2 * ISP1362_BUF_SIZE, GFP_KERNEL); + if (ref) { + int offset; + u16 *tst = &ref[ISP1362_BUF_SIZE / 2]; + + for (offset = 0; offset < ISP1362_BUF_SIZE / 2; offset++) { + ref[offset] = ~offset; + tst[offset] = offset; + } + + for (offset = 0; offset < 4; offset++) { + int j; + + for (j = 0; j < 8; j++) { + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_buffer(isp1362_hcd, (u8 *)ref + offset, 0, j); + isp1362_read_buffer(isp1362_hcd, (u8 *)tst + offset, 0, j); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + if (memcmp(ref, tst, j)) { + ret = -ENODEV; + pr_err("%s: memory check with %d byte offset %d failed\n", + __func__, j, offset); + dump_data((u8 *)ref + offset, j); + dump_data((u8 *)tst + offset, j); + } + } + } + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_buffer(isp1362_hcd, ref, 0, ISP1362_BUF_SIZE); + isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + if (memcmp(ref, tst, ISP1362_BUF_SIZE)) { + ret = -ENODEV; + pr_err("%s: memory check failed\n", __func__); + dump_data((u8 *)tst, ISP1362_BUF_SIZE / 2); + } + + for (offset = 0; offset < 256; offset++) { + int test_size = 0; + + yield(); + + memset(tst, 0, ISP1362_BUF_SIZE); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE); + isp1362_read_buffer(isp1362_hcd, tst, 0, ISP1362_BUF_SIZE); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (memcmp(tst, tst + (ISP1362_BUF_SIZE / (2 * sizeof(*tst))), + ISP1362_BUF_SIZE / 2)) { + pr_err("%s: Failed to clear buffer\n", __func__); + dump_data((u8 *)tst, ISP1362_BUF_SIZE); + break; + } + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_buffer(isp1362_hcd, ref, offset * 2, PTD_HEADER_SIZE); + isp1362_write_buffer(isp1362_hcd, ref + PTD_HEADER_SIZE / sizeof(*ref), + offset * 2 + PTD_HEADER_SIZE, test_size); + isp1362_read_buffer(isp1362_hcd, tst, offset * 2, + PTD_HEADER_SIZE + test_size); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) { + dump_data(((u8 *)ref) + offset, PTD_HEADER_SIZE + test_size); + dump_data((u8 *)tst, PTD_HEADER_SIZE + test_size); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_read_buffer(isp1362_hcd, tst, offset * 2, + PTD_HEADER_SIZE + test_size); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + if (memcmp(ref, tst, PTD_HEADER_SIZE + test_size)) { + ret = -ENODEV; + pr_err("%s: memory check with offset %02x failed\n", + __func__, offset); + break; + } + pr_warning("%s: memory check with offset %02x ok after second read\n", + __func__, offset); + } + } + kfree(ref); + } + return ret; +} +#endif + +static int isp1362_hc_start(struct usb_hcd *hcd) +{ + int ret; + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + struct isp1362_platform_data *board = isp1362_hcd->board; + u16 hwcfg; + u16 chipid; + unsigned long flags; + + pr_info("%s:\n", __func__); + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + if ((chipid & HCCHIPID_MASK) != HCCHIPID_MAGIC) { + pr_err("%s: Invalid chip ID %04x\n", __func__, chipid); + return -ENODEV; + } + +#ifdef CHIP_BUFFER_TEST + ret = isp1362_chip_test(isp1362_hcd); + if (ret) + return -ENODEV; +#endif + spin_lock_irqsave(&isp1362_hcd->lock, flags); + /* clear interrupt status and disable all interrupt sources */ + isp1362_write_reg16(isp1362_hcd, HCuPINT, 0xff); + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, 0); + + /* HW conf */ + hwcfg = HCHWCFG_INT_ENABLE | HCHWCFG_DBWIDTH(1); + if (board->sel15Kres) + hwcfg |= HCHWCFG_PULLDOWN_DS2 | + ((MAX_ROOT_PORTS > 1) ? HCHWCFG_PULLDOWN_DS1 : 0); + if (board->clknotstop) + hwcfg |= HCHWCFG_CLKNOTSTOP; + if (board->oc_enable) + hwcfg |= HCHWCFG_ANALOG_OC; + if (board->int_act_high) + hwcfg |= HCHWCFG_INT_POL; + if (board->int_edge_triggered) + hwcfg |= HCHWCFG_INT_TRIGGER; + if (board->dreq_act_high) + hwcfg |= HCHWCFG_DREQ_POL; + if (board->dack_act_high) + hwcfg |= HCHWCFG_DACK_POL; + isp1362_write_reg16(isp1362_hcd, HCHWCFG, hwcfg); + isp1362_show_reg(isp1362_hcd, HCHWCFG); + isp1362_write_reg16(isp1362_hcd, HCDMACFG, 0); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + ret = isp1362_mem_config(hcd); + if (ret) + return ret; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + + /* Root hub conf */ + isp1362_hcd->rhdesca = 0; + if (board->no_power_switching) + isp1362_hcd->rhdesca |= RH_A_NPS; + if (board->power_switching_mode) + isp1362_hcd->rhdesca |= RH_A_PSM; + if (board->potpg) + isp1362_hcd->rhdesca |= (board->potpg << 24) & RH_A_POTPGT; + else + isp1362_hcd->rhdesca |= (25 << 24) & RH_A_POTPGT; + + isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca & ~RH_A_OCPM); + isp1362_write_reg32(isp1362_hcd, HCRHDESCA, isp1362_hcd->rhdesca | RH_A_OCPM); + isp1362_hcd->rhdesca = isp1362_read_reg32(isp1362_hcd, HCRHDESCA); + + isp1362_hcd->rhdescb = RH_B_PPCM; + isp1362_write_reg32(isp1362_hcd, HCRHDESCB, isp1362_hcd->rhdescb); + isp1362_hcd->rhdescb = isp1362_read_reg32(isp1362_hcd, HCRHDESCB); + + isp1362_read_reg32(isp1362_hcd, HCFMINTVL); + isp1362_write_reg32(isp1362_hcd, HCFMINTVL, (FSMP(FI) << 16) | FI); + isp1362_write_reg32(isp1362_hcd, HCLSTHRESH, LSTHRESH); + + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + isp1362_hcd->hc_control = OHCI_USB_OPER; + hcd->state = HC_STATE_RUNNING; + + spin_lock_irqsave(&isp1362_hcd->lock, flags); + /* Set up interrupts */ + isp1362_hcd->intenb = OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE; + isp1362_hcd->intenb |= OHCI_INTR_RD; + isp1362_hcd->irqenb = HCuPINT_OPR | HCuPINT_SUSP; + isp1362_write_reg32(isp1362_hcd, HCINTENB, isp1362_hcd->intenb); + isp1362_write_reg16(isp1362_hcd, HCuPINTENB, isp1362_hcd->irqenb); + + /* Go operational */ + isp1362_write_reg32(isp1362_hcd, HCCONTROL, isp1362_hcd->hc_control); + /* enable global power */ + isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC | RH_HS_DRWE); + + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct hc_driver isp1362_hc_driver = { + .description = hcd_name, + .product_desc = "ISP1362 Host Controller", + .hcd_priv_size = sizeof(struct isp1362_hcd), + + .irq = isp1362_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + .reset = isp1362_hc_reset, + .start = isp1362_hc_start, + .stop = isp1362_hc_stop, + + .urb_enqueue = isp1362_urb_enqueue, + .urb_dequeue = isp1362_urb_dequeue, + .endpoint_disable = isp1362_endpoint_disable, + + .get_frame_number = isp1362_get_frame, + + .hub_status_data = isp1362_hub_status_data, + .hub_control = isp1362_hub_control, + .bus_suspend = isp1362_bus_suspend, + .bus_resume = isp1362_bus_resume, +}; + +/*-------------------------------------------------------------------------*/ + +#define resource_len(r) (((r)->end - (r)->start) + 1) + +static int __devexit isp1362_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + struct resource *res; + + remove_debug_file(isp1362_hcd); + DBG(0, "%s: Removing HCD\n", __func__); + usb_remove_hcd(hcd); + + DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, + (u32)isp1362_hcd->data_reg); + iounmap(isp1362_hcd->data_reg); + + DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, + (u32)isp1362_hcd->addr_reg); + iounmap(isp1362_hcd->addr_reg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start); + if (res) + release_mem_region(res->start, resource_len(res)); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start); + if (res) + release_mem_region(res->start, resource_len(res)); + + DBG(0, "%s: put_hcd\n", __func__); + usb_put_hcd(hcd); + DBG(0, "%s: Done\n", __func__); + + return 0; +} + +static int __init isp1362_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct isp1362_hcd *isp1362_hcd; + struct resource *addr, *data; + void __iomem *addr_reg; + void __iomem *data_reg; + int irq; + int retval = 0; + + /* basic sanity checks first. board-specific init logic should + * have initialized this the three resources and probably board + * specific platform_data. we don't probe for IRQs, and do only + * minimal sanity checking. + */ + if (pdev->num_resources < 3) { + retval = -ENODEV; + goto err1; + } + + data = platform_get_resource(pdev, IORESOURCE_MEM, 0); + addr = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq = platform_get_irq(pdev, 0); + if (!addr || !data || irq < 0) { + retval = -ENODEV; + goto err1; + } + +#ifdef CONFIG_USB_HCD_DMA + if (pdev->dev.dma_mask) { + struct resource *dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + + if (!dma_res) { + retval = -ENODEV; + goto err1; + } + isp1362_hcd->data_dma = dma_res->start; + isp1362_hcd->max_dma_size = resource_len(dma_res); + } +#else + if (pdev->dev.dma_mask) { + DBG(1, "won't do DMA"); + retval = -ENODEV; + goto err1; + } +#endif + + if (!request_mem_region(addr->start, resource_len(addr), hcd_name)) { + retval = -EBUSY; + goto err1; + } + addr_reg = ioremap(addr->start, resource_len(addr)); + if (addr_reg == NULL) { + retval = -ENOMEM; + goto err2; + } + + if (!request_mem_region(data->start, resource_len(data), hcd_name)) { + retval = -EBUSY; + goto err3; + } + data_reg = ioremap(data->start, resource_len(data)); + if (data_reg == NULL) { + retval = -ENOMEM; + goto err4; + } + + /* allocate and initialize hcd */ + hcd = usb_create_hcd(&isp1362_hc_driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err5; + } + hcd->rsrc_start = data->start; + isp1362_hcd = hcd_to_isp1362_hcd(hcd); + isp1362_hcd->data_reg = data_reg; + isp1362_hcd->addr_reg = addr_reg; + + isp1362_hcd->next_statechange = jiffies; + spin_lock_init(&isp1362_hcd->lock); + INIT_LIST_HEAD(&isp1362_hcd->async); + INIT_LIST_HEAD(&isp1362_hcd->periodic); + INIT_LIST_HEAD(&isp1362_hcd->isoc); + INIT_LIST_HEAD(&isp1362_hcd->remove_list); + isp1362_hcd->board = pdev->dev.platform_data; +#if USE_PLATFORM_DELAY + if (!isp1362_hcd->board->delay) { + dev_err(hcd->self.controller, "No platform delay function given\n"); + retval = -ENODEV; + goto err6; + } +#endif + +#ifdef CONFIG_ARM + if (isp1362_hcd->board) + set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING); +#endif + + retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED); + if (retval != 0) + goto err6; + pr_info("%s, irq %d\n", hcd->product_desc, irq); + + create_debug_file(isp1362_hcd); + + return 0; + + err6: + DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd); + usb_put_hcd(hcd); + err5: + DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg); + iounmap(data_reg); + err4: + DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start); + release_mem_region(data->start, resource_len(data)); + err3: + DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg); + iounmap(addr_reg); + err2: + DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start); + release_mem_region(addr->start, resource_len(addr)); + err1: + pr_err("%s: init error, %d\n", __func__, retval); + + return retval; +} + +#ifdef CONFIG_PM +static int isp1362_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + int retval = 0; + + DBG(0, "%s: Suspending device\n", __func__); + + if (state.event == PM_EVENT_FREEZE) { + DBG(0, "%s: Suspending root hub\n", __func__); + retval = isp1362_bus_suspend(hcd); + } else { + DBG(0, "%s: Suspending RH ports\n", __func__); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPS); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + } + if (retval == 0) + pdev->dev.power.power_state = state; + return retval; +} + +static int isp1362_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd); + unsigned long flags; + + DBG(0, "%s: Resuming\n", __func__); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + DBG(0, "%s: Resume RH ports\n", __func__); + spin_lock_irqsave(&isp1362_hcd->lock, flags); + isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_LPSC); + spin_unlock_irqrestore(&isp1362_hcd->lock, flags); + return 0; + } + + pdev->dev.power.power_state = PMSG_ON; + + return isp1362_bus_resume(isp1362_hcd_to_hcd(isp1362_hcd)); +} +#else +#define isp1362_suspend NULL +#define isp1362_resume NULL +#endif + +static struct platform_driver isp1362_driver = { + .probe = isp1362_probe, + .remove = __devexit_p(isp1362_remove), + + .suspend = isp1362_suspend, + .resume = isp1362_resume, + .driver = { + .name = (char *)hcd_name, + .owner = THIS_MODULE, + }, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init isp1362_init(void) +{ + if (usb_disabled()) + return -ENODEV; + pr_info("driver %s, %s\n", hcd_name, DRIVER_VERSION); + return platform_driver_register(&isp1362_driver); +} +module_init(isp1362_init); + +static void __exit isp1362_cleanup(void) +{ + platform_driver_unregister(&isp1362_driver); +} +module_exit(isp1362_cleanup); diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h new file mode 100644 index 00000000000..fe60f62a32f --- /dev/null +++ b/drivers/usb/host/isp1362.h @@ -0,0 +1,1079 @@ +/* + * ISP1362 HCD (Host Controller Driver) for USB. + * + * COPYRIGHT (C) by L. Wassmann <LW@KARO-electronics.de> + */ + +/* ------------------------------------------------------------------------- */ +/* + * Platform specific compile time options + */ +#if defined(CONFIG_ARCH_KARO) +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/karo.h> + +#define USE_32BIT 1 + + +/* These options are mutually eclusive */ +#define USE_PLATFORM_DELAY 1 +#define USE_NDELAY 0 +/* + * MAX_ROOT_PORTS: Number of downstream ports + * + * The chip has two USB ports, one of which can be configured as + * an USB device port, so the value of this constant is implementation + * specific. + */ +#define MAX_ROOT_PORTS 2 +#define DUMMY_DELAY_ACCESS do {} while (0) + +/* insert platform specific definitions for other machines here */ +#elif defined(CONFIG_BLACKFIN) + +#include <linux/io.h> +#define USE_32BIT 0 +#define MAX_ROOT_PORTS 2 +#define USE_PLATFORM_DELAY 0 +#define USE_NDELAY 1 + +#define DUMMY_DELAY_ACCESS \ + do { \ + bfin_read16(ASYNC_BANK0_BASE); \ + bfin_read16(ASYNC_BANK0_BASE); \ + bfin_read16(ASYNC_BANK0_BASE); \ + } while (0) + +#undef insw +#undef outsw + +#define insw delayed_insw +#define outsw delayed_outsw + +static inline void delayed_outsw(unsigned int addr, void *buf, int len) +{ + unsigned short *bp = (unsigned short *)buf; + while (len--) { + DUMMY_DELAY_ACCESS; + outw(*bp++, addr); + } +} + +static inline void delayed_insw(unsigned int addr, void *buf, int len) +{ + unsigned short *bp = (unsigned short *)buf; + while (len--) { + DUMMY_DELAY_ACCESS; + *bp++ = inw((void *)addr); + } +} + +#else + +#define MAX_ROOT_PORTS 2 + +#define USE_32BIT 0 + +/* These options are mutually eclusive */ +#define USE_PLATFORM_DELAY 0 +#define USE_NDELAY 0 + +#define DUMMY_DELAY_ACCESS do {} while (0) + +#endif + + +/* ------------------------------------------------------------------------- */ + +#define USB_RESET_WIDTH 50 +#define MAX_XFER_SIZE 1023 + +/* Buffer sizes */ +#define ISP1362_BUF_SIZE 4096 +#define ISP1362_ISTL_BUFSIZE 512 +#define ISP1362_INTL_BLKSIZE 64 +#define ISP1362_INTL_BUFFERS 16 +#define ISP1362_ATL_BLKSIZE 64 + +#define ISP1362_REG_WRITE_OFFSET 0x80 + +#ifdef ISP1362_DEBUG +typedef const unsigned int isp1362_reg_t; + +#define REG_WIDTH_16 0x000 +#define REG_WIDTH_32 0x100 +#define REG_WIDTH_MASK 0x100 +#define REG_NO_MASK 0x0ff + +#define REG_ACCESS_R 0x200 +#define REG_ACCESS_W 0x400 +#define REG_ACCESS_RW 0x600 +#define REG_ACCESS_MASK 0x600 + +#define ISP1362_REG_NO(r) ((r) & REG_NO_MASK) + +#define _BUG_ON(x) BUG_ON(x) +#define _WARN_ON(x) WARN_ON(x) + +#define ISP1362_REG(name, addr, width, rw) \ +static isp1362_reg_t ISP1362_REG_##name = ((addr) | (width) | (rw)) + +#define REG_ACCESS_TEST(r) BUG_ON(((r) & ISP1362_REG_WRITE_OFFSET) && !((r) & REG_ACCESS_W)) +#define REG_WIDTH_TEST(r, w) BUG_ON(((r) & REG_WIDTH_MASK) != (w)) +#else +typedef const unsigned char isp1362_reg_t; +#define ISP1362_REG_NO(r) (r) +#define _BUG_ON(x) do {} while (0) +#define _WARN_ON(x) do {} while (0) + +#define ISP1362_REG(name, addr, width, rw) \ +static isp1362_reg_t ISP1362_REG_##name = addr + +#define REG_ACCESS_TEST(r) do {} while (0) +#define REG_WIDTH_TEST(r, w) do {} while (0) +#endif + +/* OHCI compatible registers */ +/* + * Note: Some of the ISP1362 'OHCI' registers implement only + * a subset of the bits defined in the OHCI spec. + * + * Bitmasks for the individual bits of these registers are defined in "ohci.h" + */ +ISP1362_REG(HCREVISION, 0x00, REG_WIDTH_32, REG_ACCESS_R); +ISP1362_REG(HCCONTROL, 0x01, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCCMDSTAT, 0x02, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCINTSTAT, 0x03, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCINTENB, 0x04, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCFMINTVL, 0x0d, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCFMREM, 0x0e, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCFMNUM, 0x0f, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCLSTHRESH, 0x11, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCRHDESCA, 0x12, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCRHDESCB, 0x13, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCRHSTATUS, 0x14, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCRHPORT1, 0x15, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCRHPORT2, 0x16, REG_WIDTH_32, REG_ACCESS_RW); + +/* Philips ISP1362 specific registers */ +ISP1362_REG(HCHWCFG, 0x20, REG_WIDTH_16, REG_ACCESS_RW); +#define HCHWCFG_DISABLE_SUSPEND (1 << 15) +#define HCHWCFG_GLOBAL_PWRDOWN (1 << 14) +#define HCHWCFG_PULLDOWN_DS2 (1 << 13) +#define HCHWCFG_PULLDOWN_DS1 (1 << 12) +#define HCHWCFG_CLKNOTSTOP (1 << 11) +#define HCHWCFG_ANALOG_OC (1 << 10) +#define HCHWCFG_ONEINT (1 << 9) +#define HCHWCFG_DACK_MODE (1 << 8) +#define HCHWCFG_ONEDMA (1 << 7) +#define HCHWCFG_DACK_POL (1 << 6) +#define HCHWCFG_DREQ_POL (1 << 5) +#define HCHWCFG_DBWIDTH_MASK (0x03 << 3) +#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK) +#define HCHWCFG_INT_POL (1 << 2) +#define HCHWCFG_INT_TRIGGER (1 << 1) +#define HCHWCFG_INT_ENABLE (1 << 0) + +ISP1362_REG(HCDMACFG, 0x21, REG_WIDTH_16, REG_ACCESS_RW); +#define HCDMACFG_CTR_ENABLE (1 << 7) +#define HCDMACFG_BURST_LEN_MASK (0x03 << 5) +#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK) +#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0) +#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1) +#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2) +#define HCDMACFG_DMA_ENABLE (1 << 4) +#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1) +#define HCDMACFG_BUF_TYPE(n) (((n) << 1) & HCDMACFG_BUF_TYPE_MASK) +#define HCDMACFG_BUF_ISTL0 HCDMACFG_BUF_TYPE(0) +#define HCDMACFG_BUF_ISTL1 HCDMACFG_BUF_TYPE(1) +#define HCDMACFG_BUF_INTL HCDMACFG_BUF_TYPE(2) +#define HCDMACFG_BUF_ATL HCDMACFG_BUF_TYPE(3) +#define HCDMACFG_BUF_DIRECT HCDMACFG_BUF_TYPE(4) +#define HCDMACFG_DMA_RW_SELECT (1 << 0) + +ISP1362_REG(HCXFERCTR, 0x22, REG_WIDTH_16, REG_ACCESS_RW); + +ISP1362_REG(HCuPINT, 0x24, REG_WIDTH_16, REG_ACCESS_RW); +#define HCuPINT_SOF (1 << 0) +#define HCuPINT_ISTL0 (1 << 1) +#define HCuPINT_ISTL1 (1 << 2) +#define HCuPINT_EOT (1 << 3) +#define HCuPINT_OPR (1 << 4) +#define HCuPINT_SUSP (1 << 5) +#define HCuPINT_CLKRDY (1 << 6) +#define HCuPINT_INTL (1 << 7) +#define HCuPINT_ATL (1 << 8) +#define HCuPINT_OTG (1 << 9) + +ISP1362_REG(HCuPINTENB, 0x25, REG_WIDTH_16, REG_ACCESS_RW); +/* same bit definitions apply as for HCuPINT */ + +ISP1362_REG(HCCHIPID, 0x27, REG_WIDTH_16, REG_ACCESS_R); +#define HCCHIPID_MASK 0xff00 +#define HCCHIPID_MAGIC 0x3600 + +ISP1362_REG(HCSCRATCH, 0x28, REG_WIDTH_16, REG_ACCESS_RW); + +ISP1362_REG(HCSWRES, 0x29, REG_WIDTH_16, REG_ACCESS_W); +#define HCSWRES_MAGIC 0x00f6 + +ISP1362_REG(HCBUFSTAT, 0x2c, REG_WIDTH_16, REG_ACCESS_RW); +#define HCBUFSTAT_ISTL0_FULL (1 << 0) +#define HCBUFSTAT_ISTL1_FULL (1 << 1) +#define HCBUFSTAT_INTL_ACTIVE (1 << 2) +#define HCBUFSTAT_ATL_ACTIVE (1 << 3) +#define HCBUFSTAT_RESET_HWPP (1 << 4) +#define HCBUFSTAT_ISTL0_ACTIVE (1 << 5) +#define HCBUFSTAT_ISTL1_ACTIVE (1 << 6) +#define HCBUFSTAT_ISTL0_DONE (1 << 8) +#define HCBUFSTAT_ISTL1_DONE (1 << 9) +#define HCBUFSTAT_PAIRED_PTDPP (1 << 10) + +ISP1362_REG(HCDIRADDR, 0x32, REG_WIDTH_32, REG_ACCESS_RW); +#define HCDIRADDR_ADDR_MASK 0x0000ffff +#define HCDIRADDR_ADDR(n) (((n) << 0) & HCDIRADDR_ADDR_MASK) +#define HCDIRADDR_COUNT_MASK 0xffff0000 +#define HCDIRADDR_COUNT(n) (((n) << 16) & HCDIRADDR_COUNT_MASK) +ISP1362_REG(HCDIRDATA, 0x45, REG_WIDTH_16, REG_ACCESS_RW); + +ISP1362_REG(HCISTLBUFSZ, 0x30, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCISTLRATE, 0x47, REG_WIDTH_16, REG_ACCESS_RW); + +ISP1362_REG(HCINTLBUFSZ, 0x33, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCINTLBLKSZ, 0x53, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCINTLDONE, 0x17, REG_WIDTH_32, REG_ACCESS_R); +ISP1362_REG(HCINTLSKIP, 0x18, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCINTLLAST, 0x19, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCINTLCURR, 0x1a, REG_WIDTH_16, REG_ACCESS_R); + +ISP1362_REG(HCATLBUFSZ, 0x34, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCATLBLKSZ, 0x54, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCATLDONE, 0x1b, REG_WIDTH_32, REG_ACCESS_R); +ISP1362_REG(HCATLSKIP, 0x1c, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCATLLAST, 0x1d, REG_WIDTH_32, REG_ACCESS_RW); +ISP1362_REG(HCATLCURR, 0x1e, REG_WIDTH_16, REG_ACCESS_R); + +ISP1362_REG(HCATLDTC, 0x51, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(HCATLDTCTO, 0x52, REG_WIDTH_16, REG_ACCESS_RW); + + +ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R); +ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW); +ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW); + +/* Philips transfer descriptor, cpu-endian */ +struct ptd { + u16 count; +#define PTD_COUNT_MSK (0x3ff << 0) +#define PTD_TOGGLE_MSK (1 << 10) +#define PTD_ACTIVE_MSK (1 << 11) +#define PTD_CC_MSK (0xf << 12) + u16 mps; +#define PTD_MPS_MSK (0x3ff << 0) +#define PTD_SPD_MSK (1 << 10) +#define PTD_LAST_MSK (1 << 11) +#define PTD_EP_MSK (0xf << 12) + u16 len; +#define PTD_LEN_MSK (0x3ff << 0) +#define PTD_DIR_MSK (3 << 10) +#define PTD_DIR_SETUP (0) +#define PTD_DIR_OUT (1) +#define PTD_DIR_IN (2) + u16 faddr; +#define PTD_FA_MSK (0x7f << 0) +/* PTD Byte 7: [StartingFrame (if ISO PTD) | StartingFrame[0..4], PollingRate[0..2] (if INT PTD)] */ +#define PTD_SF_ISO_MSK (0xff << 8) +#define PTD_SF_INT_MSK (0x1f << 8) +#define PTD_PR_MSK (0x07 << 13) +} __attribute__ ((packed, aligned(2))); +#define PTD_HEADER_SIZE sizeof(struct ptd) + +/* ------------------------------------------------------------------------- */ +/* Copied from ohci.h: */ +/* + * Hardware transfer status codes -- CC from PTD + */ +#define PTD_CC_NOERROR 0x00 +#define PTD_CC_CRC 0x01 +#define PTD_CC_BITSTUFFING 0x02 +#define PTD_CC_DATATOGGLEM 0x03 +#define PTD_CC_STALL 0x04 +#define PTD_DEVNOTRESP 0x05 +#define PTD_PIDCHECKFAIL 0x06 +#define PTD_UNEXPECTEDPID 0x07 +#define PTD_DATAOVERRUN 0x08 +#define PTD_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define PTD_BUFFEROVERRUN 0x0C +#define PTD_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define PTD_NOTACCESSED 0x0F + + +/* map OHCI TD status codes (CC) to errno values */ +static const int cc_to_error[16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIMEDOUT, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -EALREADY, + /* (for HCD) */ -EALREADY +}; + + +/* + * HcControl (control) register masks + */ +#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ +#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ + +/* pre-shifted values for HCFS */ +# define OHCI_USB_RESET (0 << 6) +# define OHCI_USB_RESUME (1 << 6) +# define OHCI_USB_OPER (2 << 6) +# define OHCI_USB_SUSPEND (3 << 6) + +/* + * HcCommandStatus (cmdstatus) register masks + */ +#define OHCI_HCR (1 << 0) /* host controller reset */ +#define OHCI_SOC (3 << 16) /* scheduling overrun count */ + +/* + * masks used with interrupt registers: + * HcInterruptStatus (intrstatus) + * HcInterruptEnable (intrenable) + * HcInterruptDisable (intrdisable) + */ +#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ +#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ +#define OHCI_INTR_SF (1 << 2) /* start frame */ +#define OHCI_INTR_RD (1 << 3) /* resume detect */ +#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ +#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ +#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ +#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ + +/* roothub.portstatus [i] bits */ +#define RH_PS_CCS 0x00000001 /* current connect status */ +#define RH_PS_PES 0x00000002 /* port enable status*/ +#define RH_PS_PSS 0x00000004 /* port suspend status */ +#define RH_PS_POCI 0x00000008 /* port over current indicator */ +#define RH_PS_PRS 0x00000010 /* port reset status */ +#define RH_PS_PPS 0x00000100 /* port power status */ +#define RH_PS_LSDA 0x00000200 /* low speed device attached */ +#define RH_PS_CSC 0x00010000 /* connect status change */ +#define RH_PS_PESC 0x00020000 /* port enable status change */ +#define RH_PS_PSSC 0x00040000 /* port suspend status change */ +#define RH_PS_OCIC 0x00080000 /* over current indicator change */ +#define RH_PS_PRSC 0x00100000 /* port reset status change */ + +/* roothub.status bits */ +#define RH_HS_LPS 0x00000001 /* local power status */ +#define RH_HS_OCI 0x00000002 /* over current indicator */ +#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ +#define RH_HS_LPSC 0x00010000 /* local power status change */ +#define RH_HS_OCIC 0x00020000 /* over current indicator change */ +#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ + +/* roothub.b masks */ +#define RH_B_DR 0x0000ffff /* device removable flags */ +#define RH_B_PPCM 0xffff0000 /* port power control mask */ + +/* roothub.a masks */ +#define RH_A_NDP (0xff << 0) /* number of downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* over current protection mode */ +#define RH_A_NOCP (1 << 12) /* no over current protection */ +#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ + +#define FI 0x2edf /* 12000 bits per frame (-1) */ +#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) +#define LSTHRESH 0x628 /* lowspeed bit threshold */ + +/* ------------------------------------------------------------------------- */ + +/* PTD accessor macros. */ +#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0) +#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK) +#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10) +#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK) +#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11) +#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK) +#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12) +#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK) +#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0) +#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK) +#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10) +#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK) +#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11) +#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK) +#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12) +#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK) +#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0) +#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK) +#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10) +#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK) +#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0) +#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK) +#define PTD_GET_SF_INT(p) (((p)->faddr & PTD_SF_INT_MSK) >> 8) +#define PTD_SF_INT(v) (((v) << 8) & PTD_SF_INT_MSK) +#define PTD_GET_SF_ISO(p) (((p)->faddr & PTD_SF_ISO_MSK) >> 8) +#define PTD_SF_ISO(v) (((v) << 8) & PTD_SF_ISO_MSK) +#define PTD_GET_PR(p) (((p)->faddr & PTD_PR_MSK) >> 13) +#define PTD_PR(v) (((v) << 13) & PTD_PR_MSK) + +#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */ +#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE) + +struct isp1362_ep { + struct usb_host_endpoint *hep; + struct usb_device *udev; + + /* philips transfer descriptor */ + struct ptd ptd; + + u8 maxpacket; + u8 epnum; + u8 nextpid; + u16 error_count; + u16 length; /* of current packet */ + s16 ptd_offset; /* buffer offset in ISP1362 where + PTD has been stored + (for access thru HCDIRDATA) */ + int ptd_index; + int num_ptds; + void *data; /* to databuf */ + /* queue of active EPs (the ones transmitted to the chip) */ + struct list_head active; + + /* periodic schedule */ + u8 branch; + u16 interval; + u16 load; + u16 last_iso; + + /* async schedule */ + struct list_head schedule; /* list of all EPs that need processing */ + struct list_head remove_list; + int num_req; +}; + +struct isp1362_ep_queue { + struct list_head active; /* list of PTDs currently processed by HC */ + atomic_t finishing; + unsigned long buf_map; + unsigned long skip_map; + int free_ptd; + u16 buf_start; + u16 buf_size; + u16 blk_size; /* PTD buffer block size for ATL and INTL */ + u8 buf_count; + u8 buf_avail; + char name[16]; + + /* for statistical tracking */ + u8 stat_maxptds; /* Max # of ptds seen simultaneously in fifo */ + u8 ptd_count; /* number of ptds submitted to this queue */ +}; + +struct isp1362_hcd { + spinlock_t lock; + void __iomem *addr_reg; + void __iomem *data_reg; + + struct isp1362_platform_data *board; + + struct proc_dir_entry *pde; + unsigned long stat1, stat2, stat4, stat8, stat16; + + /* HC registers */ + u32 intenb; /* "OHCI" interrupts */ + u16 irqenb; /* uP interrupts */ + + /* Root hub registers */ + u32 rhdesca; + u32 rhdescb; + u32 rhstatus; + u32 rhport[MAX_ROOT_PORTS]; + unsigned long next_statechange; + + /* HC control reg shadow copy */ + u32 hc_control; + + /* async schedule: control, bulk */ + struct list_head async; + + /* periodic schedule: int */ + u16 load[PERIODIC_SIZE]; + struct list_head periodic; + u16 fmindex; + + /* periodic schedule: isochronous */ + struct list_head isoc; + int istl_flip:1; + int irq_active:1; + + /* Schedules for the current frame */ + struct isp1362_ep_queue atl_queue; + struct isp1362_ep_queue intl_queue; + struct isp1362_ep_queue istl_queue[2]; + + /* list of PTDs retrieved from HC */ + struct list_head remove_list; + enum { + ISP1362_INT_SOF, + ISP1362_INT_ISTL0, + ISP1362_INT_ISTL1, + ISP1362_INT_EOT, + ISP1362_INT_OPR, + ISP1362_INT_SUSP, + ISP1362_INT_CLKRDY, + ISP1362_INT_INTL, + ISP1362_INT_ATL, + ISP1362_INT_OTG, + NUM_ISP1362_IRQS + } IRQ_NAMES; + unsigned int irq_stat[NUM_ISP1362_IRQS]; + int req_serial; +}; + +static inline const char *ISP1362_INT_NAME(int n) +{ + switch (n) { + case ISP1362_INT_SOF: return "SOF"; + case ISP1362_INT_ISTL0: return "ISTL0"; + case ISP1362_INT_ISTL1: return "ISTL1"; + case ISP1362_INT_EOT: return "EOT"; + case ISP1362_INT_OPR: return "OPR"; + case ISP1362_INT_SUSP: return "SUSP"; + case ISP1362_INT_CLKRDY: return "CLKRDY"; + case ISP1362_INT_INTL: return "INTL"; + case ISP1362_INT_ATL: return "ATL"; + case ISP1362_INT_OTG: return "OTG"; + default: return "unknown"; + } +} + +static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr) +{ + unsigned p = (unsigned)ptr; + if (!(p & 0xf)) + isp1362_hcd->stat16++; + else if (!(p & 0x7)) + isp1362_hcd->stat8++; + else if (!(p & 0x3)) + isp1362_hcd->stat4++; + else if (!(p & 0x1)) + isp1362_hcd->stat2++; + else + isp1362_hcd->stat1++; +} + +static inline struct isp1362_hcd *hcd_to_isp1362_hcd(struct usb_hcd *hcd) +{ + return (struct isp1362_hcd *) (hcd->hcd_priv); +} + +static inline struct usb_hcd *isp1362_hcd_to_hcd(struct isp1362_hcd *isp1362_hcd) +{ + return container_of((void *)isp1362_hcd, struct usb_hcd, hcd_priv); +} + +#define frame_before(f1, f2) ((s16)((u16)f1 - (u16)f2) < 0) + +/* + * ISP1362 HW Interface + */ + +#ifdef ISP1362_DEBUG +#define DBG(level, fmt...) \ + do { \ + if (dbg_level > level) \ + pr_debug(fmt); \ + } while (0) +#define _DBG(level, fmt...) \ + do { \ + if (dbg_level > level) \ + printk(fmt); \ + } while (0) +#else +#define DBG(fmt...) do {} while (0) +#define _DBG DBG +#endif + +#ifdef VERBOSE +# define VDBG(fmt...) DBG(3, fmt) +#else +# define VDBG(fmt...) do {} while (0) +#endif + +#ifdef REGISTERS +# define RDBG(fmt...) DBG(1, fmt) +#else +# define RDBG(fmt...) do {} while (0) +#endif + +#ifdef URB_TRACE +#define URB_DBG(fmt...) DBG(0, fmt) +#else +#define URB_DBG(fmt...) do {} while (0) +#endif + + +#if USE_PLATFORM_DELAY +#if USE_NDELAY +#error USE_PLATFORM_DELAY and USE_NDELAY defined simultaneously. +#endif +#define isp1362_delay(h, d) (h)->board->delay(isp1362_hcd_to_hcd(h)->self.controller, d) +#elif USE_NDELAY +#define isp1362_delay(h, d) ndelay(d) +#else +#define isp1362_delay(h, d) do {} while (0) +#endif + +#define get_urb(ep) ({ \ + BUG_ON(list_empty(&ep->hep->urb_list)); \ + container_of(ep->hep->urb_list.next, struct urb, urb_list); \ +}) + +/* basic access functions for ISP1362 chip registers */ +/* NOTE: The contents of the address pointer register cannot be read back! The driver must ensure, + * that all register accesses are performed with interrupts disabled, since the interrupt + * handler has no way of restoring the previous state. + */ +static void isp1362_write_addr(struct isp1362_hcd *isp1362_hcd, isp1362_reg_t reg) +{ + /*_BUG_ON((reg & ISP1362_REG_WRITE_OFFSET) && !(reg & REG_ACCESS_W));*/ + REG_ACCESS_TEST(reg); + _BUG_ON(!irqs_disabled()); + DUMMY_DELAY_ACCESS; + writew(ISP1362_REG_NO(reg), isp1362_hcd->addr_reg); + DUMMY_DELAY_ACCESS; + isp1362_delay(isp1362_hcd, 1); +} + +static void isp1362_write_data16(struct isp1362_hcd *isp1362_hcd, u16 val) +{ + _BUG_ON(!irqs_disabled()); + DUMMY_DELAY_ACCESS; + writew(val, isp1362_hcd->data_reg); +} + +static u16 isp1362_read_data16(struct isp1362_hcd *isp1362_hcd) +{ + u16 val; + + _BUG_ON(!irqs_disabled()); + DUMMY_DELAY_ACCESS; + val = readw(isp1362_hcd->data_reg); + + return val; +} + +static void isp1362_write_data32(struct isp1362_hcd *isp1362_hcd, u32 val) +{ + _BUG_ON(!irqs_disabled()); +#if USE_32BIT + DUMMY_DELAY_ACCESS; + writel(val, isp1362_hcd->data_reg); +#else + DUMMY_DELAY_ACCESS; + writew((u16)val, isp1362_hcd->data_reg); + DUMMY_DELAY_ACCESS; + writew(val >> 16, isp1362_hcd->data_reg); +#endif +} + +static u32 isp1362_read_data32(struct isp1362_hcd *isp1362_hcd) +{ + u32 val; + + _BUG_ON(!irqs_disabled()); +#if USE_32BIT + DUMMY_DELAY_ACCESS; + val = readl(isp1362_hcd->data_reg); +#else + DUMMY_DELAY_ACCESS; + val = (u32)readw(isp1362_hcd->data_reg); + DUMMY_DELAY_ACCESS; + val |= (u32)readw(isp1362_hcd->data_reg) << 16; +#endif + return val; +} + +/* use readsw/writesw to access the fifo whenever possible */ +/* assume HCDIRDATA or XFERCTR & addr_reg have been set up */ +static void isp1362_read_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len) +{ + u8 *dp = buf; + u16 data; + + if (!len) + return; + + _BUG_ON(!irqs_disabled()); + + RDBG("%s: Reading %d byte from fifo to mem @ %p\n", __func__, len, buf); +#if USE_32BIT + if (len >= 4) { + RDBG("%s: Using readsl for %d dwords\n", __func__, len >> 2); + readsl(isp1362_hcd->data_reg, dp, len >> 2); + dp += len & ~3; + len &= 3; + } +#endif + if (len >= 2) { + RDBG("%s: Using readsw for %d words\n", __func__, len >> 1); + insw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1); + dp += len & ~1; + len &= 1; + } + + BUG_ON(len & ~1); + if (len > 0) { + data = isp1362_read_data16(isp1362_hcd); + RDBG("%s: Reading trailing byte %02x to mem @ %08x\n", __func__, + (u8)data, (u32)dp); + *dp = (u8)data; + } +} + +static void isp1362_write_fifo(struct isp1362_hcd *isp1362_hcd, void *buf, u16 len) +{ + u8 *dp = buf; + u16 data; + + if (!len) + return; + + if ((unsigned)dp & 0x1) { + /* not aligned */ + for (; len > 1; len -= 2) { + data = *dp++; + data |= *dp++ << 8; + isp1362_write_data16(isp1362_hcd, data); + } + if (len) + isp1362_write_data16(isp1362_hcd, *dp); + return; + } + + _BUG_ON(!irqs_disabled()); + + RDBG("%s: Writing %d byte to fifo from memory @%p\n", __func__, len, buf); +#if USE_32BIT + if (len >= 4) { + RDBG("%s: Using writesl for %d dwords\n", __func__, len >> 2); + writesl(isp1362_hcd->data_reg, dp, len >> 2); + dp += len & ~3; + len &= 3; + } +#endif + if (len >= 2) { + RDBG("%s: Using writesw for %d words\n", __func__, len >> 1); + outsw((unsigned long)isp1362_hcd->data_reg, dp, len >> 1); + dp += len & ~1; + len &= 1; + } + + BUG_ON(len & ~1); + if (len > 0) { + /* finally write any trailing byte; we don't need to care + * about the high byte of the last word written + */ + data = (u16)*dp; + RDBG("%s: Sending trailing byte %02x from mem @ %08x\n", __func__, + data, (u32)dp); + isp1362_write_data16(isp1362_hcd, data); + } +} + +#define isp1362_read_reg16(d, r) ({ \ + u16 __v; \ + REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16); \ + isp1362_write_addr(d, ISP1362_REG_##r); \ + __v = isp1362_read_data16(d); \ + RDBG("%s: Read %04x from %s[%02x]\n", __func__, __v, #r, \ + ISP1362_REG_NO(ISP1362_REG_##r)); \ + __v; \ +}) + +#define isp1362_read_reg32(d, r) ({ \ + u32 __v; \ + REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32); \ + isp1362_write_addr(d, ISP1362_REG_##r); \ + __v = isp1362_read_data32(d); \ + RDBG("%s: Read %08x from %s[%02x]\n", __func__, __v, #r, \ + ISP1362_REG_NO(ISP1362_REG_##r)); \ + __v; \ +}) + +#define isp1362_write_reg16(d, r, v) { \ + REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_16); \ + isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET); \ + isp1362_write_data16(d, (u16)(v)); \ + RDBG("%s: Wrote %04x to %s[%02x]\n", __func__, (u16)(v), #r, \ + ISP1362_REG_NO(ISP1362_REG_##r)); \ +} + +#define isp1362_write_reg32(d, r, v) { \ + REG_WIDTH_TEST(ISP1362_REG_##r, REG_WIDTH_32); \ + isp1362_write_addr(d, (ISP1362_REG_##r) | ISP1362_REG_WRITE_OFFSET); \ + isp1362_write_data32(d, (u32)(v)); \ + RDBG("%s: Wrote %08x to %s[%02x]\n", __func__, (u32)(v), #r, \ + ISP1362_REG_NO(ISP1362_REG_##r)); \ +} + +#define isp1362_set_mask16(d, r, m) { \ + u16 __v; \ + __v = isp1362_read_reg16(d, r); \ + if ((__v | m) != __v) \ + isp1362_write_reg16(d, r, __v | m); \ +} + +#define isp1362_clr_mask16(d, r, m) { \ + u16 __v; \ + __v = isp1362_read_reg16(d, r); \ + if ((__v & ~m) != __v) \ + isp1362_write_reg16(d, r, __v & ~m); \ +} + +#define isp1362_set_mask32(d, r, m) { \ + u32 __v; \ + __v = isp1362_read_reg32(d, r); \ + if ((__v | m) != __v) \ + isp1362_write_reg32(d, r, __v | m); \ +} + +#define isp1362_clr_mask32(d, r, m) { \ + u32 __v; \ + __v = isp1362_read_reg32(d, r); \ + if ((__v & ~m) != __v) \ + isp1362_write_reg32(d, r, __v & ~m); \ +} + +#ifdef ISP1362_DEBUG +#define isp1362_show_reg(d, r) { \ + if ((ISP1362_REG_##r & REG_WIDTH_MASK) == REG_WIDTH_32) \ + DBG(0, "%-12s[%02x]: %08x\n", #r, \ + ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg32(d, r)); \ + else \ + DBG(0, "%-12s[%02x]: %04x\n", #r, \ + ISP1362_REG_NO(ISP1362_REG_##r), isp1362_read_reg16(d, r)); \ +} +#else +#define isp1362_show_reg(d, r) do {} while (0) +#endif + +static void __attribute__((__unused__)) isp1362_show_regs(struct isp1362_hcd *isp1362_hcd) +{ + isp1362_show_reg(isp1362_hcd, HCREVISION); + isp1362_show_reg(isp1362_hcd, HCCONTROL); + isp1362_show_reg(isp1362_hcd, HCCMDSTAT); + isp1362_show_reg(isp1362_hcd, HCINTSTAT); + isp1362_show_reg(isp1362_hcd, HCINTENB); + isp1362_show_reg(isp1362_hcd, HCFMINTVL); + isp1362_show_reg(isp1362_hcd, HCFMREM); + isp1362_show_reg(isp1362_hcd, HCFMNUM); + isp1362_show_reg(isp1362_hcd, HCLSTHRESH); + isp1362_show_reg(isp1362_hcd, HCRHDESCA); + isp1362_show_reg(isp1362_hcd, HCRHDESCB); + isp1362_show_reg(isp1362_hcd, HCRHSTATUS); + isp1362_show_reg(isp1362_hcd, HCRHPORT1); + isp1362_show_reg(isp1362_hcd, HCRHPORT2); + + isp1362_show_reg(isp1362_hcd, HCHWCFG); + isp1362_show_reg(isp1362_hcd, HCDMACFG); + isp1362_show_reg(isp1362_hcd, HCXFERCTR); + isp1362_show_reg(isp1362_hcd, HCuPINT); + + if (in_interrupt()) + DBG(0, "%-12s[%02x]: %04x\n", "HCuPINTENB", + ISP1362_REG_NO(ISP1362_REG_HCuPINTENB), isp1362_hcd->irqenb); + else + isp1362_show_reg(isp1362_hcd, HCuPINTENB); + isp1362_show_reg(isp1362_hcd, HCCHIPID); + isp1362_show_reg(isp1362_hcd, HCSCRATCH); + isp1362_show_reg(isp1362_hcd, HCBUFSTAT); + isp1362_show_reg(isp1362_hcd, HCDIRADDR); + /* Access would advance fifo + * isp1362_show_reg(isp1362_hcd, HCDIRDATA); + */ + isp1362_show_reg(isp1362_hcd, HCISTLBUFSZ); + isp1362_show_reg(isp1362_hcd, HCISTLRATE); + isp1362_show_reg(isp1362_hcd, HCINTLBUFSZ); + isp1362_show_reg(isp1362_hcd, HCINTLBLKSZ); + isp1362_show_reg(isp1362_hcd, HCINTLDONE); + isp1362_show_reg(isp1362_hcd, HCINTLSKIP); + isp1362_show_reg(isp1362_hcd, HCINTLLAST); + isp1362_show_reg(isp1362_hcd, HCINTLCURR); + isp1362_show_reg(isp1362_hcd, HCATLBUFSZ); + isp1362_show_reg(isp1362_hcd, HCATLBLKSZ); + /* only valid after ATL_DONE interrupt + * isp1362_show_reg(isp1362_hcd, HCATLDONE); + */ + isp1362_show_reg(isp1362_hcd, HCATLSKIP); + isp1362_show_reg(isp1362_hcd, HCATLLAST); + isp1362_show_reg(isp1362_hcd, HCATLCURR); + isp1362_show_reg(isp1362_hcd, HCATLDTC); + isp1362_show_reg(isp1362_hcd, HCATLDTCTO); +} + +static void isp1362_write_diraddr(struct isp1362_hcd *isp1362_hcd, u16 offset, u16 len) +{ + _BUG_ON(offset & 1); + _BUG_ON(offset >= ISP1362_BUF_SIZE); + _BUG_ON(len > ISP1362_BUF_SIZE); + _BUG_ON(offset + len > ISP1362_BUF_SIZE); + len = (len + 1) & ~1; + + isp1362_clr_mask16(isp1362_hcd, HCDMACFG, HCDMACFG_CTR_ENABLE); + isp1362_write_reg32(isp1362_hcd, HCDIRADDR, + HCDIRADDR_ADDR(offset) | HCDIRADDR_COUNT(len)); +} + +static void isp1362_read_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len) +{ + _BUG_ON(offset & 1); + + isp1362_write_diraddr(isp1362_hcd, offset, len); + + DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__, + len, offset, (u32)buf); + + isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); + _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); + + isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA); + + isp1362_read_fifo(isp1362_hcd, buf, len); + _WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); + isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); + _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); +} + +static void isp1362_write_buffer(struct isp1362_hcd *isp1362_hcd, void *buf, u16 offset, int len) +{ + _BUG_ON(offset & 1); + + isp1362_write_diraddr(isp1362_hcd, offset, len); + + DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__, + len, offset, (u32)buf); + + isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); + _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); + + isp1362_write_addr(isp1362_hcd, ISP1362_REG_HCDIRDATA | ISP1362_REG_WRITE_OFFSET); + isp1362_write_fifo(isp1362_hcd, buf, len); + + _WARN_ON(!(isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); + isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT); + _WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT)); +} + +static void __attribute__((unused)) dump_data(char *buf, int len) +{ + if (dbg_level > 0) { + int k; + int lf = 0; + + for (k = 0; k < len; ++k) { + if (!lf) + DBG(0, "%04x:", k); + printk(" %02x", ((u8 *) buf)[k]); + lf = 1; + if (!k) + continue; + if (k % 16 == 15) { + printk("\n"); + lf = 0; + continue; + } + if (k % 8 == 7) + printk(" "); + if (k % 4 == 3) + printk(" "); + } + if (lf) + printk("\n"); + } +} + +#if defined(ISP1362_DEBUG) && defined(PTD_TRACE) + +static void dump_ptd(struct ptd *ptd) +{ + DBG(0, "EP %p: CC=%x EP=%d DIR=%x CNT=%d LEN=%d MPS=%d TGL=%x ACT=%x FA=%d SPD=%x SF=%x PR=%x LST=%x\n", + container_of(ptd, struct isp1362_ep, ptd), + PTD_GET_CC(ptd), PTD_GET_EP(ptd), PTD_GET_DIR(ptd), + PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), + PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd), PTD_GET_FA(ptd), + PTD_GET_SPD(ptd), PTD_GET_SF_INT(ptd), PTD_GET_PR(ptd), PTD_GET_LAST(ptd)); + DBG(0, " %04x %04x %04x %04x\n", ptd->count, ptd->mps, ptd->len, ptd->faddr); +} + +static void dump_ptd_out_data(struct ptd *ptd, u8 *buf) +{ + if (dbg_level > 0) { + if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) { + DBG(0, "--out->\n"); + dump_data(buf, PTD_GET_LEN(ptd)); + } + } +} + +static void dump_ptd_in_data(struct ptd *ptd, u8 *buf) +{ + if (dbg_level > 0) { + if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) { + DBG(0, "<--in--\n"); + dump_data(buf, PTD_GET_COUNT(ptd)); + } + DBG(0, "-----\n"); + } +} + +static void dump_ptd_queue(struct isp1362_ep_queue *epq) +{ + struct isp1362_ep *ep; + int dbg = dbg_level; + + dbg_level = 1; + list_for_each_entry(ep, &epq->active, active) { + dump_ptd(&ep->ptd); + dump_data(ep->data, ep->length); + } + dbg_level = dbg; +} +#else +#define dump_ptd(ptd) do {} while (0) +#define dump_ptd_in_data(ptd, buf) do {} while (0) +#define dump_ptd_out_data(ptd, buf) do {} while (0) +#define dump_ptd_data(ptd, buf) do {} while (0) +#define dump_ptd_queue(epq) do {} while (0) +#endif diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 15438469f21..9600a58299d 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -386,6 +386,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) hwmode |= HW_DACK_POL_HIGH; if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH) hwmode |= HW_DREQ_POL_HIGH; + if (priv->devflags & ISP1760_FLAG_INTR_POL_HIGH) + hwmode |= HW_INTR_HIGH_ACT; + if (priv->devflags & ISP1760_FLAG_INTR_EDGE_TRIG) + hwmode |= HW_INTR_EDGE_TRIG; /* * We have to set this first in case we're in 16-bit mode. diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index 462f4943cb1..6931ef5c965 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -142,6 +142,8 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, #define ISP1760_FLAG_DACK_POL_HIGH 0x00000010 /* DACK active high */ #define ISP1760_FLAG_DREQ_POL_HIGH 0x00000020 /* DREQ active high */ #define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */ +#define ISP1760_FLAG_INTR_POL_HIGH 0x00000080 /* Interrupt polarity active high */ +#define ISP1760_FLAG_INTR_EDGE_TRIG 0x00000100 /* Interrupt edge triggered */ /* chip memory management */ struct memory_chunk { diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index d4feebfc63b..1c9f977a5c9 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -3,6 +3,7 @@ * Currently there is support for * - OpenFirmware * - PCI + * - PDEV (generic platform device centralized driver model) * * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de> * @@ -11,6 +12,7 @@ #include <linux/usb.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/usb/isp1760.h> #include "../core/hcd.h" #include "isp1760-hcd.h" @@ -308,6 +310,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) struct resource *mem_res; struct resource *irq_res; resource_size_t mem_size; + struct isp1760_platform_data *priv = pdev->dev.platform_data; + unsigned int devflags = 0; unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED; mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -330,8 +334,23 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) } irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; + if (priv) { + if (priv->is_isp1761) + devflags |= ISP1760_FLAG_ISP1761; + if (priv->bus_width_16) + devflags |= ISP1760_FLAG_BUS_WIDTH_16; + if (priv->port1_otg) + devflags |= ISP1760_FLAG_OTG_EN; + if (priv->analog_oc) + devflags |= ISP1760_FLAG_ANALOG_OC; + if (priv->dack_polarity_high) + devflags |= ISP1760_FLAG_DACK_POL_HIGH; + if (priv->dreq_polarity_high) + devflags |= ISP1760_FLAG_DREQ_POL_HIGH; + } + hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, - irqflags, &pdev->dev, dev_name(&pdev->dev), 0); + irqflags, &pdev->dev, dev_name(&pdev->dev), devflags); if (IS_ERR(hcd)) { pr_warning("isp1760: Failed to register the HCD device\n"); ret = -ENODEV; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index bb5e6f67157..7ccffcbe7b6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -148,7 +148,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, at91_start_hc(pdev); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED); + retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED); if (retval == 0) return retval; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 2ac4e022a13..e4380082ebb 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -248,10 +248,9 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev, - pm_message_t message) +static int ohci_hcd_au1xxx_drv_suspend(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); unsigned long flags; int rc; @@ -274,10 +273,6 @@ static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev, ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); (void)ohci_readl(ohci, &ohci->regs->intrdisable); - /* make sure snapshot being resumed re-enumerates everything */ - if (message.event == PM_EVENT_PRETHAW) - ohci_usb_reset(ohci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); au1xxx_stop_ohc(); @@ -287,9 +282,9 @@ bail: return rc; } -static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev) +static int ohci_hcd_au1xxx_drv_resume(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); au1xxx_start_ohc(); @@ -298,20 +293,26 @@ static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev) return 0; } + +static struct dev_pm_ops au1xxx_ohci_pmops = { + .suspend = ohci_hcd_au1xxx_drv_suspend, + .resume = ohci_hcd_au1xxx_drv_resume, +}; + +#define AU1XXX_OHCI_PMOPS &au1xxx_ohci_pmops + #else -#define ohci_hcd_au1xxx_drv_suspend NULL -#define ohci_hcd_au1xxx_drv_resume NULL +#define AU1XXX_OHCI_PMOPS NULL #endif static struct platform_driver ohci_hcd_au1xxx_driver = { .probe = ohci_hcd_au1xxx_drv_probe, .remove = ohci_hcd_au1xxx_drv_remove, .shutdown = usb_hcd_platform_shutdown, - .suspend = ohci_hcd_au1xxx_drv_suspend, - .resume = ohci_hcd_au1xxx_drv_resume, .driver = { .name = "au1xxx-ohci", .owner = THIS_MODULE, + .pm = AU1XXX_OHCI_PMOPS, }, }; diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index b0dbf4157d2..4e681613e7a 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -188,7 +188,6 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int status; if (time_before(jiffies, ohci->next_statechange)) msleep(5); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 58151687d35..78bb7710f36 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -34,7 +34,6 @@ #include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/dmapool.h> -#include <linux/reboot.h> #include <linux/workqueue.h> #include <linux/debugfs.h> diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e44dc2cbca2..f1c06202fdf 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -177,9 +177,13 @@ static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, if (inf->flags & NO_OC_PROTECTION) uhcrhda |= UHCRHDA_NOCP; + else + uhcrhda &= ~UHCRHDA_NOCP; if (inf->flags & OC_MODE_PERPORT) uhcrhda |= UHCRHDA_OCPM; + else + uhcrhda &= ~UHCRHDA_OCPM; if (inf->power_on_delay) { uhcrhda &= ~UHCRHDA_POTPGT(0xff); @@ -477,38 +481,47 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); ohci->ohci.next_statechange = jiffies; - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(ohci, dev); hcd->state = HC_STATE_SUSPENDED; return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) +static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxaohci_platform_data *inf = dev->platform_data; int status; if (time_before(jiffies, ohci->ohci.next_statechange)) msleep(5); ohci->ohci.next_statechange = jiffies; - if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0) + if ((status = pxa27x_start_hc(ohci, dev)) < 0) return status; + /* Select Power Management Mode */ + pxa27x_ohci_select_pmm(ohci, inf->port_mode); + ohci_finish_controller_resume(hcd); return 0; } + +static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { + .suspend = ohci_hcd_pxa27x_drv_suspend, + .resume = ohci_hcd_pxa27x_drv_resume, +}; #endif /* work with hotplug and coldplug */ @@ -518,13 +531,12 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, .shutdown = usb_hcd_platform_shutdown, -#ifdef CONFIG_PM - .suspend = ohci_hcd_pxa27x_drv_suspend, - .resume = ohci_hcd_pxa27x_drv_resume, -#endif .driver = { .name = "pxa27x-ohci", .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &ohci_hcd_pxa27x_pm_ops, +#endif }, }; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index c2d80f80448..16fecb8ecc3 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -418,7 +418,7 @@ static struct ed *ed_get ( is_out = !(ep->desc.bEndpointAddress & USB_DIR_IN); /* FIXME usbcore changes dev->devnum before SET_ADDRESS - * suceeds ... otherwise we wouldn't need "pipe". + * succeeds ... otherwise we wouldn't need "pipe". */ info = usb_pipedevice (pipe); ed->type = usb_pipetype(pipe); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 5ac489ee3da..50f57f46883 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -33,7 +33,6 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/interrupt.h> -#include <linux/reboot.h> #include <linux/usb.h> #include <linux/moduleparam.h> #include <linux/dma-mapping.h> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 83b5f9cea85..23cf3bde476 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -475,4 +475,4 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); } -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a949259f18b..5b22a4d1c9e 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -719,8 +719,12 @@ retry: /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ - sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) - | (1 << USB_PORT_FEAT_CONNECTION); + if (sl811->stat_insrmv & 1) + sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION; + else + sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION); + + sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION; } else if (irqstat & SL11H_INTMASK_RD) { if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) { diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 64e57bfe236..acd582c0280 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1422,7 +1422,6 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, goto err_submit_failed; /* Add this URB to the QH */ - urbp->qh = qh; list_add_tail(&urbp->node, &qh->queue); /* If the new URB is the first and only one on this QH then either diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index c2050785a81..c632437c764 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -227,11 +227,21 @@ void scan_async_work(struct work_struct *work) /* * Now that the ASL is updated, complete the removal of any * removed qsets. + * + * If the qset was to be reset, do so and reinsert it into the + * ASL if it has pending transfers. */ spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { qset_remove_complete(whc, qset); + if (qset->reset) { + qset_reset(whc, qset); + if (!list_empty(&qset->stds)) { + asl_qset_insert_begin(whc, qset); + queue_work(whc->workqueue, &whc->async_work); + } + } } spin_unlock_irq(&whc->lock); @@ -267,7 +277,7 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - if (!qset->in_sw_list) + if (!qset->in_sw_list && !qset->remove) asl_qset_insert_begin(whc, qset); } else usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index e019a5058ab..687b622a161 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -192,19 +192,23 @@ static void whc_endpoint_reset(struct usb_hcd *usb_hcd, struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); struct whc *whc = wusbhc_to_whc(wusbhc); struct whc_qset *qset; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); qset = ep->hcpriv; if (qset) { qset->remove = 1; + qset->reset = 1; if (usb_endpoint_xfer_bulk(&ep->desc) || usb_endpoint_xfer_control(&ep->desc)) queue_work(whc->workqueue, &whc->async_work); else queue_work(whc->workqueue, &whc->periodic_work); - - qset_reset(whc, qset); } + + spin_unlock_irqrestore(&whc->lock, flags); } diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index ff4ef9e910d..a9e05bac664 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -255,11 +255,21 @@ void scan_periodic_work(struct work_struct *work) /* * Now that the PZL is updated, complete the removal of any * removed qsets. + * + * If the qset was to be reset, do so and reinsert it into the + * PZL if it has pending transfers. */ spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { qset_remove_complete(whc, qset); + if (qset->reset) { + qset_reset(whc, qset); + if (!list_empty(&qset->stds)) { + qset_insert_in_sw_list(whc, qset); + queue_work(whc->workqueue, &whc->periodic_work); + } + } } spin_unlock_irq(&whc->lock); @@ -295,7 +305,7 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - if (!qset->in_sw_list) + if (!qset->in_sw_list && !qset->remove) qset_insert_in_sw_list(whc, qset); } else usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 640b38fbd05..1b9dc157157 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -103,7 +103,6 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) void qset_clear(struct whc *whc, struct whc_qset *qset) { qset->td_start = qset->td_end = qset->ntds = 0; - qset->remove = 0; qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; @@ -125,7 +124,7 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) */ void qset_reset(struct whc *whc, struct whc_qset *qset) { - wait_for_completion(&qset->remove_complete); + qset->reset = 0; qset->qh.status &= ~QH_STATUS_SEQ_MASK; qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); @@ -156,6 +155,7 @@ struct whc_qset *get_qset(struct whc *whc, struct urb *urb, void qset_remove_complete(struct whc *whc, struct whc_qset *qset) { + qset->remove = 0; list_del_init(&qset->list_node); complete(&qset->remove_complete); } diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index 794dba0d0f0..e8d0001605b 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -264,6 +264,7 @@ struct whc_qset { unsigned in_sw_list:1; unsigned in_hw_list:1; unsigned remove:1; + unsigned reset:1; struct urb *pause_after_urb; struct completion remove_complete; int max_burst; diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 705e3432415..33128d52f21 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -413,7 +413,8 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) int i; struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); - dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx); + dma_addr_t dma = ctx->dma + + ((unsigned long)slot_ctx - (unsigned long)ctx->bytes); int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params); xhci_dbg(xhci, "Slot Context:\n"); @@ -459,7 +460,7 @@ void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, for (i = 0; i < last_ep_ctx; ++i) { struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i); dma_addr_t dma = ctx->dma + - ((unsigned long)ep_ctx - (unsigned long)ctx); + ((unsigned long)ep_ctx - (unsigned long)ctx->bytes); xhci_dbg(xhci, "Endpoint %02d Context:\n", i); xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n", diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 816c39caca1..99911e727e0 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -22,12 +22,18 @@ #include <linux/irq.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include "xhci.h" #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" +/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ +static int link_quirk; +module_param(link_quirk, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); + /* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * handshake - spin reading hc until handshake completes or fails @@ -214,6 +220,12 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "xhci_init\n"); spin_lock_init(&xhci->lock); + if (link_quirk) { + xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n"); + xhci->quirks |= XHCI_LINK_TRB_QUIRK; + } else { + xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); + } retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); @@ -339,13 +351,14 @@ void xhci_event_ring_work(unsigned long arg) xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); xhci_dbg_cmd_ptrs(xhci); for (i = 0; i < MAX_HC_SLOTS; ++i) { - if (xhci->devs[i]) { - for (j = 0; j < 31; ++j) { - if (xhci->devs[i]->ep_rings[j]) { - xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j); - xhci_debug_segment(xhci, xhci->devs[i]->ep_rings[j]->deq_seg); - } - } + if (!xhci->devs[i]) + continue; + for (j = 0; j < 31; ++j) { + struct xhci_ring *ring = xhci->devs[i]->eps[j].ring; + if (!ring) + continue; + xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j); + xhci_debug_segment(xhci, ring->deq_seg); } } @@ -555,13 +568,22 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) return 1 << (xhci_get_endpoint_index(desc) + 1); } +/* Find the flag for this endpoint (for use in the control context). Use the + * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is + * bit 1, etc. + */ +unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) +{ + return 1 << (ep_index + 1); +} + /* Compute the last valid endpoint context index. Basically, this is the * endpoint index plus one. For slot contexts with more than valid endpoint, * we find the most significant bit set in the added contexts flags. * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000 * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one. */ -static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs) +unsigned int xhci_last_valid_endpoint(u32 added_ctxs) { return fls(added_ctxs) - 1; } @@ -589,6 +611,71 @@ int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, return 1; } +static int xhci_configure_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, struct xhci_command *command, + bool ctx_change, bool must_succeed); + +/* + * Full speed devices may have a max packet size greater than 8 bytes, but the + * USB core doesn't know that until it reads the first 8 bytes of the + * descriptor. If the usb_device's max packet size changes after that point, + * we need to issue an evaluate context command and wait on it. + */ +static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, + unsigned int ep_index, struct urb *urb) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_container_ctx *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; + int max_packet_size; + int hw_max_packet_size; + int ret = 0; + + out_ctx = xhci->devs[slot_id]->out_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2); + max_packet_size = urb->dev->ep0.desc.wMaxPacketSize; + if (hw_max_packet_size != max_packet_size) { + xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n"); + xhci_dbg(xhci, "Max packet size in usb_device = %d\n", + max_packet_size); + xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n", + hw_max_packet_size); + xhci_dbg(xhci, "Issuing evaluate context command.\n"); + + /* Set up the modified control endpoint 0 */ + xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, ep_index); + in_ctx = xhci->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + ep_ctx->ep_info2 &= ~MAX_PACKET_MASK; + ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size); + + /* Set up the input context flags for the command */ + /* FIXME: This won't work if a non-default control endpoint + * changes max packet sizes. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx->add_flags = EP0_FLAG; + ctrl_ctx->drop_flags = 0; + + xhci_dbg(xhci, "Slot %d input context\n", slot_id); + xhci_dbg_ctx(xhci, in_ctx, ep_index); + xhci_dbg(xhci, "Slot %d output context\n", slot_id); + xhci_dbg_ctx(xhci, out_ctx, ep_index); + + ret = xhci_configure_endpoint(xhci, urb->dev, NULL, + true, false); + + /* Clean up the input context for later use by bandwidth + * functions. + */ + ctrl_ctx->add_flags = SLOT_FLAG; + } + return ret; +} + /* * non-error returns are a promise to giveback() the urb later * we drop ownership so next owner (or urb unlink) can get it @@ -600,13 +687,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) int ret = 0; unsigned int slot_id, ep_index; + if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0) return -EINVAL; slot_id = urb->dev->slot_id; ep_index = xhci_get_endpoint_index(&urb->ep->desc); - spin_lock_irqsave(&xhci->lock, flags); if (!xhci->devs || !xhci->devs[slot_id]) { if (!in_interrupt()) dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n"); @@ -619,19 +706,38 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = -ESHUTDOWN; goto exit; } - if (usb_endpoint_xfer_control(&urb->ep->desc)) + if (usb_endpoint_xfer_control(&urb->ep->desc)) { + /* Check to see if the max packet size for the default control + * endpoint changed during FS device enumeration + */ + if (urb->dev->speed == USB_SPEED_FULL) { + ret = xhci_check_maxpacket(xhci, slot_id, + ep_index, urb); + if (ret < 0) + return ret; + } + /* We have a spinlock and interrupts disabled, so we must pass * atomic context to this function, which may allocate memory. */ + spin_lock_irqsave(&xhci->lock, flags); ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); - else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) + spin_unlock_irqrestore(&xhci->lock, flags); + } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { + spin_lock_irqsave(&xhci->lock, flags); ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); - else + spin_unlock_irqrestore(&xhci->lock, flags); + } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); + } else { ret = -EINVAL; + } exit: - spin_unlock_irqrestore(&xhci->lock, flags); return ret; } @@ -674,6 +780,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) struct xhci_td *td; unsigned int ep_index; struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; xhci = hcd_to_xhci(hcd); spin_lock_irqsave(&xhci->lock, flags); @@ -686,17 +793,18 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_ring(xhci, xhci->event_ring); ep_index = xhci_get_endpoint_index(&urb->ep->desc); - ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index]; + ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; + ep_ring = ep->ring; xhci_dbg(xhci, "Endpoint ring:\n"); xhci_debug_ring(xhci, ep_ring); td = (struct xhci_td *) urb->hcpriv; - ep_ring->cancels_pending++; - list_add_tail(&td->cancelled_td_list, &ep_ring->cancelled_td_list); + ep->cancels_pending++; + list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); /* Queue a stop endpoint command, but only if this is * the first cancellation to be handled. */ - if (ep_ring->cancels_pending == 1) { + if (ep->cancels_pending == 1) { xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index); xhci_ring_cmd_db(xhci); } @@ -930,6 +1038,141 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir } } +static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, + struct usb_device *udev, int *cmd_status) +{ + int ret; + + switch (*cmd_status) { + case COMP_ENOMEM: + dev_warn(&udev->dev, "Not enough host controller resources " + "for new device state.\n"); + ret = -ENOMEM; + /* FIXME: can we allocate more resources for the HC? */ + break; + case COMP_BW_ERR: + dev_warn(&udev->dev, "Not enough bandwidth " + "for new device state.\n"); + ret = -ENOSPC; + /* FIXME: can we go back to the old state? */ + break; + case COMP_TRB_ERR: + /* the HCD set up something wrong */ + dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, " + "add flag = 1, " + "and endpoint is not disabled.\n"); + ret = -EINVAL; + break; + case COMP_SUCCESS: + dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); + ret = 0; + break; + default: + xhci_err(xhci, "ERROR: unexpected command completion " + "code 0x%x.\n", *cmd_status); + ret = -EINVAL; + break; + } + return ret; +} + +static int xhci_evaluate_context_result(struct xhci_hcd *xhci, + struct usb_device *udev, int *cmd_status) +{ + int ret; + struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; + + switch (*cmd_status) { + case COMP_EINVAL: + dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate " + "context command.\n"); + ret = -EINVAL; + break; + case COMP_EBADSLT: + dev_warn(&udev->dev, "WARN: slot not enabled for" + "evaluate context command.\n"); + case COMP_CTX_STATE: + dev_warn(&udev->dev, "WARN: invalid context state for " + "evaluate context command.\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); + ret = -EINVAL; + break; + case COMP_SUCCESS: + dev_dbg(&udev->dev, "Successful evaluate context command\n"); + ret = 0; + break; + default: + xhci_err(xhci, "ERROR: unexpected command completion " + "code 0x%x.\n", *cmd_status); + ret = -EINVAL; + break; + } + return ret; +} + +/* Issue a configure endpoint command or evaluate context command + * and wait for it to finish. + */ +static int xhci_configure_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct xhci_command *command, + bool ctx_change, bool must_succeed) +{ + int ret; + int timeleft; + unsigned long flags; + struct xhci_container_ctx *in_ctx; + struct completion *cmd_completion; + int *cmd_status; + struct xhci_virt_device *virt_dev; + + spin_lock_irqsave(&xhci->lock, flags); + virt_dev = xhci->devs[udev->slot_id]; + if (command) { + in_ctx = command->in_ctx; + cmd_completion = command->completion; + cmd_status = &command->status; + command->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&command->cmd_list, &virt_dev->cmd_list); + } else { + in_ctx = virt_dev->in_ctx; + cmd_completion = &virt_dev->cmd_completion; + cmd_status = &virt_dev->cmd_status; + } + + if (!ctx_change) + ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, + udev->slot_id, must_succeed); + else + ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, + udev->slot_id); + if (ret < 0) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); + return -ENOMEM; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for the configure endpoint command to complete */ + timeleft = wait_for_completion_interruptible_timeout( + cmd_completion, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for %s command\n", + timeleft == 0 ? "Timeout" : "Signal", + ctx_change == 0 ? + "configure endpoint" : + "evaluate context"); + /* FIXME cancel the configure endpoint command */ + return -ETIME; + } + + if (!ctx_change) + return xhci_configure_endpoint_result(xhci, udev, cmd_status); + return xhci_evaluate_context_result(xhci, udev, cmd_status); +} + /* Called after one or more calls to xhci_add_endpoint() or * xhci_drop_endpoint(). If this call fails, the USB core is expected * to call xhci_reset_bandwidth(). @@ -944,8 +1187,6 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) { int i; int ret = 0; - int timeleft; - unsigned long flags; struct xhci_hcd *xhci; struct xhci_virt_device *virt_dev; struct xhci_input_control_ctx *ctrl_ctx; @@ -975,56 +1216,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg_ctx(xhci, virt_dev->in_ctx, LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); - spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma, - udev->slot_id); - if (ret < 0) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); - return -ENOMEM; - } - xhci_ring_cmd_db(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); - - /* Wait for the configure endpoint command to complete */ - timeleft = wait_for_completion_interruptible_timeout( - &virt_dev->cmd_completion, - USB_CTRL_SET_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for configure endpoint command\n", - timeleft == 0 ? "Timeout" : "Signal"); - /* FIXME cancel the configure endpoint command */ - return -ETIME; - } - - switch (virt_dev->cmd_status) { - case COMP_ENOMEM: - dev_warn(&udev->dev, "Not enough host controller resources " - "for new device state.\n"); - ret = -ENOMEM; - /* FIXME: can we allocate more resources for the HC? */ - break; - case COMP_BW_ERR: - dev_warn(&udev->dev, "Not enough bandwidth " - "for new device state.\n"); - ret = -ENOSPC; - /* FIXME: can we go back to the old state? */ - break; - case COMP_TRB_ERR: - /* the HCD set up something wrong */ - dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, " - "and endpoint is not disabled.\n"); - ret = -EINVAL; - break; - case COMP_SUCCESS: - dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); - break; - default: - xhci_err(xhci, "ERROR: unexpected command completion " - "code 0x%x.\n", virt_dev->cmd_status); - ret = -EINVAL; - break; - } + ret = xhci_configure_endpoint(xhci, udev, NULL, + false, false); if (ret) { /* Callee should call reset_bandwidth() */ return ret; @@ -1037,10 +1230,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_zero_in_ctx(xhci, virt_dev); /* Free any old rings */ for (i = 1; i < 31; ++i) { - if (virt_dev->new_ep_rings[i]) { - xhci_ring_free(xhci, virt_dev->ep_rings[i]); - virt_dev->ep_rings[i] = virt_dev->new_ep_rings[i]; - virt_dev->new_ep_rings[i] = NULL; + if (virt_dev->eps[i].new_ring) { + xhci_ring_free(xhci, virt_dev->eps[i].ring); + virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; + virt_dev->eps[i].new_ring = NULL; } } @@ -1067,14 +1260,93 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) virt_dev = xhci->devs[udev->slot_id]; /* Free any rings allocated for added endpoints */ for (i = 0; i < 31; ++i) { - if (virt_dev->new_ep_rings[i]) { - xhci_ring_free(xhci, virt_dev->new_ep_rings[i]); - virt_dev->new_ep_rings[i] = NULL; + if (virt_dev->eps[i].new_ring) { + xhci_ring_free(xhci, virt_dev->eps[i].new_ring); + virt_dev->eps[i].new_ring = NULL; } } xhci_zero_in_ctx(xhci, virt_dev); } +static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx, + u32 add_flags, u32 drop_flags) +{ + struct xhci_input_control_ctx *ctrl_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx->add_flags = add_flags; + ctrl_ctx->drop_flags = drop_flags; + xhci_slot_copy(xhci, in_ctx, out_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + + xhci_dbg(xhci, "Input Context:\n"); + xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); +} + +void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_ep_ctx *ep_ctx; + u32 added_ctxs; + dma_addr_t addr; + + xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, ep_index); + in_ctx = xhci->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg, + deq_state->new_deq_ptr); + if (addr == 0) { + xhci_warn(xhci, "WARN Cannot submit config ep after " + "reset ep command\n"); + xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n", + deq_state->new_deq_seg, + deq_state->new_deq_ptr); + return; + } + ep_ctx->deq = addr | deq_state->new_cycle_state; + + added_ctxs = xhci_get_endpoint_flag_from_index(ep_index); + xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs); +} + +void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, + struct usb_device *udev, unsigned int ep_index) +{ + struct xhci_dequeue_state deq_state; + struct xhci_virt_ep *ep; + + xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n"); + ep = &xhci->devs[udev->slot_id]->eps[ep_index]; + /* We need to move the HW's dequeue pointer past this TD, + * or it will attempt to resend it on the next doorbell ring. + */ + xhci_find_new_dequeue_state(xhci, udev->slot_id, + ep_index, ep->stopped_td, + &deq_state); + + /* HW with the reset endpoint quirk will use the saved dequeue state to + * issue a configure endpoint command later. + */ + if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { + xhci_dbg(xhci, "Queueing new dequeue state\n"); + xhci_queue_new_dequeue_state(xhci, udev->slot_id, + ep_index, &deq_state); + } else { + /* Better hope no one uses the input context between now and the + * reset endpoint completion! + */ + xhci_dbg(xhci, "Setting up input context for " + "configure endpoint command\n"); + xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id, + ep_index, &deq_state); + } +} + /* Deal with stalled endpoints. The core should have sent the control message * to clear the halt condition. However, we need to make the xHCI hardware * reset its sequence number, since a device will expect a sequence number of @@ -1089,8 +1361,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, unsigned int ep_index; unsigned long flags; int ret; - struct xhci_dequeue_state deq_state; - struct xhci_ring *ep_ring; + struct xhci_virt_ep *virt_ep; xhci = hcd_to_xhci(hcd); udev = (struct usb_device *) ep->hcpriv; @@ -1100,12 +1371,16 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, if (!ep->hcpriv) return; ep_index = xhci_get_endpoint_index(&ep->desc); - ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index]; - if (!ep_ring->stopped_td) { + virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; + if (!virt_ep->stopped_td) { xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n", ep->desc.bEndpointAddress); return; } + if (usb_endpoint_xfer_control(&ep->desc)) { + xhci_dbg(xhci, "Control endpoint stall already handled.\n"); + return; + } xhci_dbg(xhci, "Queueing reset endpoint command\n"); spin_lock_irqsave(&xhci->lock, flags); @@ -1116,17 +1391,8 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, * command. Better hope that last command worked! */ if (!ret) { - xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n"); - /* We need to move the HW's dequeue pointer past this TD, - * or it will attempt to resend it on the next doorbell ring. - */ - xhci_find_new_dequeue_state(xhci, udev->slot_id, - ep_index, ep_ring->stopped_td, &deq_state); - xhci_dbg(xhci, "Queueing new dequeue state\n"); - xhci_queue_new_dequeue_state(xhci, ep_ring, - udev->slot_id, - ep_index, &deq_state); - kfree(ep_ring->stopped_td); + xhci_cleanup_stalled_ring(xhci, udev, ep_index); + kfree(virt_ep->stopped_td); xhci_ring_cmd_db(xhci); } spin_unlock_irqrestore(&xhci->lock, flags); @@ -1328,6 +1594,88 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } +/* Once a hub descriptor is fetched for a device, we need to update the xHC's + * internal data structures for the device. + */ +int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_virt_device *vdev; + struct xhci_command *config_cmd; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + unsigned long flags; + unsigned think_time; + int ret; + + /* Ignore root hubs */ + if (!hdev->parent) + return 0; + + vdev = xhci->devs[hdev->slot_id]; + if (!vdev) { + xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); + return -EINVAL; + } + config_cmd = xhci_alloc_command(xhci, true, mem_flags); + if (!config_cmd) { + xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); + return -ENOMEM; + } + + spin_lock_irqsave(&xhci->lock, flags); + xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); + slot_ctx->dev_info |= DEV_HUB; + if (tt->multi) + slot_ctx->dev_info |= DEV_MTT; + if (xhci->hci_version > 0x95) { + xhci_dbg(xhci, "xHCI version %x needs hub " + "TT think time and number of ports\n", + (unsigned int) xhci->hci_version); + slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild); + /* Set TT think time - convert from ns to FS bit times. + * 0 = 8 FS bit times, 1 = 16 FS bit times, + * 2 = 24 FS bit times, 3 = 32 FS bit times. + */ + think_time = tt->think_time; + if (think_time != 0) + think_time = (think_time / 666) - 1; + slot_ctx->tt_info |= TT_THINK_TIME(think_time); + } else { + xhci_dbg(xhci, "xHCI version %x doesn't need hub " + "TT think time or number of ports\n", + (unsigned int) xhci->hci_version); + } + slot_ctx->dev_state = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + + xhci_dbg(xhci, "Set up %s for hub device.\n", + (xhci->hci_version > 0x95) ? + "configure endpoint" : "evaluate context"); + xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id); + xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0); + + /* Issue and wait for the configure endpoint or + * evaluate context command. + */ + if (xhci->hci_version > 0x95) + ret = xhci_configure_endpoint(xhci, hdev, config_cmd, + false, false); + else + ret = xhci_configure_endpoint(xhci, hdev, config_cmd, + true, false); + + xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id); + xhci_dbg_ctx(xhci, vdev->out_ctx, 0); + + xhci_free_command(xhci, config_cmd); + return ret; +} + int xhci_get_frame(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index e6b9a1c6002..1db4fea8c17 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -94,6 +94,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, val = prev->trbs[TRBS_PER_SEGMENT-1].link.control; val &= ~TRB_TYPE_BITMASK; val |= TRB_TYPE(TRB_LINK); + /* Always set the chain bit with 0.95 hardware */ + if (xhci_link_trb_quirk(xhci)) + val |= TRB_CHAIN; prev->trbs[TRBS_PER_SEGMENT-1].link.control = val; } xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n", @@ -141,7 +144,6 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, return 0; INIT_LIST_HEAD(&ring->td_list); - INIT_LIST_HEAD(&ring->cancelled_td_list); if (num_segs == 0) return ring; @@ -262,8 +264,8 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) return; for (i = 0; i < 31; ++i) - if (dev->ep_rings[i]) - xhci_ring_free(xhci, dev->ep_rings[i]); + if (dev->eps[i].ring) + xhci_ring_free(xhci, dev->eps[i].ring); if (dev->in_ctx) xhci_free_container_ctx(xhci, dev->in_ctx); @@ -278,6 +280,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { struct xhci_virt_device *dev; + int i; /* Slot ID 0 is reserved */ if (slot_id == 0 || xhci->devs[slot_id]) { @@ -306,12 +309,17 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id, (unsigned long long)dev->in_ctx->dma); + /* Initialize the cancellation list for each endpoint */ + for (i = 0; i < 31; i++) + INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list); + /* Allocate endpoint 0 ring */ - dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags); - if (!dev->ep_rings[0]) + dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags); + if (!dev->eps[0].ring) goto fail; init_completion(&dev->cmd_completion); + INIT_LIST_HEAD(&dev->cmd_list); /* Point to output device context in dcbaa. */ xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma; @@ -352,9 +360,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= LAST_CTX(1); + slot_ctx->dev_info |= (u32) udev->route; switch (udev->speed) { case USB_SPEED_SUPER: - slot_ctx->dev_info |= (u32) udev->route; slot_ctx->dev_info |= (u32) SLOT_SPEED_SS; break; case USB_SPEED_HIGH: @@ -382,14 +390,12 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); /* Is this a LS/FS device under a HS hub? */ - /* - * FIXME: I don't think this is right, where does the TT info for the - * roothub or parent hub come from? - */ if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) && udev->tt) { slot_ctx->tt_info = udev->tt->hub->slot_id; slot_ctx->tt_info |= udev->ttport << 8; + if (udev->tt->multi) + slot_ctx->dev_info |= DEV_MTT; } xhci_dbg(xhci, "udev->tt = %p\n", udev->tt); xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport); @@ -398,22 +404,35 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud /* Step 5 */ ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP); /* - * See section 4.3 bullet 6: - * The default Max Packet size for ep0 is "8 bytes for a USB2 - * LS/FS/HS device or 512 bytes for a USB3 SS device" * XXX: Not sure about wireless USB devices. */ - if (udev->speed == USB_SPEED_SUPER) + switch (udev->speed) { + case USB_SPEED_SUPER: ep0_ctx->ep_info2 |= MAX_PACKET(512); - else + break; + case USB_SPEED_HIGH: + /* USB core guesses at a 64-byte max packet first for FS devices */ + case USB_SPEED_FULL: + ep0_ctx->ep_info2 |= MAX_PACKET(64); + break; + case USB_SPEED_LOW: ep0_ctx->ep_info2 |= MAX_PACKET(8); + break; + case USB_SPEED_VARIABLE: + xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); + return -EINVAL; + break; + default: + /* New speed? */ + BUG(); + } /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */ ep0_ctx->ep_info2 |= MAX_BURST(0); ep0_ctx->ep_info2 |= ERROR_COUNT(3); ep0_ctx->deq = - dev->ep_rings[0]->first_seg->dma; - ep0_ctx->deq |= dev->ep_rings[0]->cycle_state; + dev->eps[0].ring->first_seg->dma; + ep0_ctx->deq |= dev->eps[0].ring->cycle_state; /* Steps 7 and 8 were done in xhci_alloc_virt_device() */ @@ -523,10 +542,11 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); /* Set up the endpoint ring */ - virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags); - if (!virt_dev->new_ep_rings[ep_index]) + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 1, true, mem_flags); + if (!virt_dev->eps[ep_index].new_ring) return -ENOMEM; - ep_ring = virt_dev->new_ep_rings[ep_index]; + ep_ring = virt_dev->eps[ep_index].new_ring; ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep); @@ -598,6 +618,48 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci, */ } +/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy. + * Useful when you want to change one particular aspect of the endpoint and then + * issue a configure endpoint command. + */ +void xhci_endpoint_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx, + unsigned int ep_index) +{ + struct xhci_ep_ctx *out_ep_ctx; + struct xhci_ep_ctx *in_ep_ctx; + + out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + + in_ep_ctx->ep_info = out_ep_ctx->ep_info; + in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2; + in_ep_ctx->deq = out_ep_ctx->deq; + in_ep_ctx->tx_info = out_ep_ctx->tx_info; +} + +/* Copy output xhci_slot_ctx to the input xhci_slot_ctx. + * Useful when you want to change one particular aspect of the endpoint and then + * issue a configure endpoint command. Only the context entries field matters, + * but we'll copy the whole thing anyway. + */ +void xhci_slot_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx) +{ + struct xhci_slot_ctx *in_slot_ctx; + struct xhci_slot_ctx *out_slot_ctx; + + in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); + out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx); + + in_slot_ctx->dev_info = out_slot_ctx->dev_info; + in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2; + in_slot_ctx->tt_info = out_slot_ctx->tt_info; + in_slot_ctx->dev_state = out_slot_ctx->dev_state; +} + /* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) { @@ -695,6 +757,44 @@ static void scratchpad_free(struct xhci_hcd *xhci) xhci->scratchpad = NULL; } +struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, + bool allocate_completion, gfp_t mem_flags) +{ + struct xhci_command *command; + + command = kzalloc(sizeof(*command), mem_flags); + if (!command) + return NULL; + + command->in_ctx = + xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, mem_flags); + if (!command->in_ctx) + return NULL; + + if (allocate_completion) { + command->completion = + kzalloc(sizeof(struct completion), mem_flags); + if (!command->completion) { + xhci_free_container_ctx(xhci, command->in_ctx); + return NULL; + } + init_completion(command->completion); + } + + command->status = 0; + INIT_LIST_HEAD(&command->cmd_list); + return command; +} + +void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command) +{ + xhci_free_container_ctx(xhci, + command->in_ctx); + kfree(command->completion); + kfree(command); +} + void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 592fe7e623f..06595ec27bb 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -24,6 +24,10 @@ #include "xhci.h" +/* Device for a quirk */ +#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 +#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -59,9 +63,20 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1); xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2); xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3); + xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); + xhci->hci_version = HC_VERSION(xhci->hcc_params); xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params); xhci_print_registers(xhci); + /* Look for vendor-specific quirks */ + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x0) { + xhci->quirks |= XHCI_RESET_EP_QUIRK; + xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" + " endpoint cmd after reset endpoint\n"); + } + /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) @@ -121,6 +136,7 @@ static const struct hc_driver xhci_pci_hc_driver = { .check_bandwidth = xhci_check_bandwidth, .reset_bandwidth = xhci_reset_bandwidth, .address_device = xhci_address_device, + .update_hub_device = xhci_update_hub_device, /* * scheduling support diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index aa88a067148..173c39c7648 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -172,8 +172,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer * have their chain bit cleared (so that each Link TRB is a separate TD). * * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit - * set, but other sections talk about dealing with the chain bit set. - * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB. + * set, but other sections talk about dealing with the chain bit set. This was + * fixed in the 0.96 specification errata, but we have to assume that all 0.95 + * xHCI hardware can't handle the chain bit being cleared on a link TRB. */ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer) { @@ -191,8 +192,14 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer while (last_trb(xhci, ring, ring->enq_seg, next)) { if (!consumer) { if (ring != xhci->event_ring) { - next->link.control &= ~TRB_CHAIN; - next->link.control |= chain; + /* If we're not dealing with 0.95 hardware, + * carry over the chain bit of the previous TRB + * (which may mean the chain bit is cleared). + */ + if (!xhci_link_trb_quirk(xhci)) { + next->link.control &= ~TRB_CHAIN; + next->link.control |= chain; + } /* Give this link TRB to the hardware */ wmb(); if (next->link.control & TRB_CYCLE) @@ -289,16 +296,18 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index) { - struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; + unsigned int ep_state; u32 field; __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep = &xhci->devs[slot_id]->eps[ep_index]; + ep_state = ep->ep_state; /* Don't ring the doorbell for this endpoint if there are pending * cancellations because the we don't want to interrupt processing. */ - if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING) - && !(ep_ring->state & EP_HALTED)) { + if (!ep->cancels_pending && !(ep_state & SET_DEQ_PENDING) + && !(ep_state & EP_HALTED)) { field = xhci_readl(xhci, db_addr) & DB_MASK; xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr); /* Flush PCI posted writes - FIXME Matthew Wilcox says this @@ -354,7 +363,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_td *cur_td, struct xhci_dequeue_state *state) { struct xhci_virt_device *dev = xhci->devs[slot_id]; - struct xhci_ring *ep_ring = dev->ep_rings[ep_index]; + struct xhci_ring *ep_ring = dev->eps[ep_index].ring; struct xhci_generic_trb *trb; struct xhci_ep_ctx *ep_ctx; dma_addr_t addr; @@ -362,7 +371,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_cycle_state = 0; xhci_dbg(xhci, "Finding segment containing stopped TRB.\n"); state->new_deq_seg = find_trb_seg(cur_td->start_seg, - ep_ring->stopped_trb, + dev->eps[ep_index].stopped_trb, &state->new_cycle_state); if (!state->new_deq_seg) BUG(); @@ -442,9 +451,11 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, union xhci_trb *deq_ptr, u32 cycle_state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, - struct xhci_ring *ep_ring, unsigned int slot_id, - unsigned int ep_index, struct xhci_dequeue_state *deq_state) + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state) { + struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), " "new deq ptr = %p (0x%llx dma), new cycle = %u\n", deq_state->new_deq_seg, @@ -461,8 +472,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, * if the ring is running, and ringing the doorbell starts the * ring running. */ - ep_ring->state |= SET_DEQ_PENDING; - xhci_ring_cmd_db(xhci); + ep->ep_state |= SET_DEQ_PENDING; } /* @@ -481,6 +491,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, unsigned int slot_id; unsigned int ep_index; struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; struct list_head *entry; struct xhci_td *cur_td = 0; struct xhci_td *last_unlinked_td; @@ -493,9 +504,10 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, memset(&deq_state, 0, sizeof(deq_state)); slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep = &xhci->devs[slot_id]->eps[ep_index]; + ep_ring = ep->ring; - if (list_empty(&ep_ring->cancelled_td_list)) + if (list_empty(&ep->cancelled_td_list)) return; /* Fix up the ep ring first, so HW stops executing cancelled TDs. @@ -503,7 +515,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * it. We're also in the event handler, so we can't get re-interrupted * if another Stop Endpoint command completes */ - list_for_each(entry, &ep_ring->cancelled_td_list) { + list_for_each(entry, &ep->cancelled_td_list) { cur_td = list_entry(entry, struct xhci_td, cancelled_td_list); xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n", cur_td->first_trb, @@ -512,7 +524,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * If we stopped on the TD we need to cancel, then we have to * move the xHC endpoint ring dequeue pointer past this TD. */ - if (cur_td == ep_ring->stopped_td) + if (cur_td == ep->stopped_td) xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td, &deq_state); else @@ -523,14 +535,15 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * the cancelled TD list for URB completion later. */ list_del(&cur_td->td_list); - ep_ring->cancels_pending--; + ep->cancels_pending--; } last_unlinked_td = cur_td; /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { - xhci_queue_new_dequeue_state(xhci, ep_ring, + xhci_queue_new_dequeue_state(xhci, slot_id, ep_index, &deq_state); + xhci_ring_cmd_db(xhci); } else { /* Otherwise just ring the doorbell to restart the ring */ ring_ep_doorbell(xhci, slot_id, ep_index); @@ -543,7 +556,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, * So stop when we've completed the URB for the last TD we unlinked. */ do { - cur_td = list_entry(ep_ring->cancelled_td_list.next, + cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); list_del(&cur_td->cancelled_td_list); @@ -590,7 +603,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); dev = xhci->devs[slot_id]; - ep_ring = dev->ep_rings[ep_index]; + ep_ring = dev->eps[ep_index].ring; ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx); @@ -634,7 +647,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, ep_ctx->deq); } - ep_ring->state &= ~SET_DEQ_PENDING; + dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; ring_ep_doorbell(xhci, slot_id, ep_index); } @@ -644,18 +657,60 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci, { int slot_id; unsigned int ep_index; + struct xhci_ring *ep_ring; slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]); ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]); + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; /* This command will only fail if the endpoint wasn't halted, * but we don't care. */ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n", (unsigned int) GET_COMP_CODE(event->status)); - /* Clear our internal halted state and restart the ring */ - xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED; - ring_ep_doorbell(xhci, slot_id, ep_index); + /* HW with the reset endpoint quirk needs to have a configure endpoint + * command complete before the endpoint can be used. Queue that here + * because the HW can't handle two commands being queued in a row. + */ + if (xhci->quirks & XHCI_RESET_EP_QUIRK) { + xhci_dbg(xhci, "Queueing configure endpoint command\n"); + xhci_queue_configure_endpoint(xhci, + xhci->devs[slot_id]->in_ctx->dma, slot_id, + false); + xhci_ring_cmd_db(xhci); + } else { + /* Clear our internal halted state and restart the ring */ + xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } +} + +/* Check to see if a command in the device's command queue matches this one. + * Signal the completion or free the command, and return 1. Return 0 if the + * completed command isn't at the head of the command list. + */ +static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct xhci_event_cmd *event) +{ + struct xhci_command *command; + + if (list_empty(&virt_dev->cmd_list)) + return 0; + + command = list_entry(virt_dev->cmd_list.next, + struct xhci_command, cmd_list); + if (xhci->cmd_ring->dequeue != command->command_trb) + return 0; + + command->status = + GET_COMP_CODE(event->status); + list_del(&command->cmd_list); + if (command->completion) + complete(command->completion); + else + xhci_free_command(xhci, command); + return 1; } static void handle_cmd_completion(struct xhci_hcd *xhci, @@ -664,6 +719,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, int slot_id = TRB_TO_SLOT_ID(event->flags); u64 cmd_dma; dma_addr_t cmd_dequeue_dma; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_virt_device *virt_dev; + unsigned int ep_index; + struct xhci_ring *ep_ring; + unsigned int ep_state; cmd_dma = event->cmd_trb; cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, @@ -691,6 +751,47 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_free_virt_device(xhci, slot_id); break; case TRB_TYPE(TRB_CONFIG_EP): + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + break; + /* + * Configure endpoint commands can come from the USB core + * configuration or alt setting changes, or because the HW + * needed an extra configure endpoint command after a reset + * endpoint command. In the latter case, the xHCI driver is + * not waiting on the configure endpoint command. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, + virt_dev->in_ctx); + /* Input ctx add_flags are the endpoint index plus one */ + ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + if (!ep_ring) { + /* This must have been an initial configure endpoint */ + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + break; + } + ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; + xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, " + "state = %d\n", ep_index, ep_state); + if (xhci->quirks & XHCI_RESET_EP_QUIRK && + ep_state & EP_HALTED) { + /* Clear our internal halted state and restart ring */ + xhci->devs[slot_id]->eps[ep_index].ep_state &= + ~EP_HALTED; + ring_ep_doorbell(xhci, slot_id, ep_index); + } else { + xhci->devs[slot_id]->cmd_status = + GET_COMP_CODE(event->status); + complete(&xhci->devs[slot_id]->cmd_completion); + } + break; + case TRB_TYPE(TRB_EVAL_CONTEXT): + virt_dev = xhci->devs[slot_id]; + if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) + break; xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status); complete(&xhci->devs[slot_id]->cmd_completion); break; @@ -805,7 +906,9 @@ static int handle_tx_event(struct xhci_hcd *xhci, struct xhci_transfer_event *event) { struct xhci_virt_device *xdev; + struct xhci_virt_ep *ep; struct xhci_ring *ep_ring; + unsigned int slot_id; int ep_index; struct xhci_td *td = 0; dma_addr_t event_dma; @@ -814,9 +917,11 @@ static int handle_tx_event(struct xhci_hcd *xhci, struct urb *urb = 0; int status = -EINPROGRESS; struct xhci_ep_ctx *ep_ctx; + u32 trb_comp_code; xhci_dbg(xhci, "In %s\n", __func__); - xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)]; + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; if (!xdev) { xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n"); return -ENODEV; @@ -825,7 +930,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Endpoint ID is 1 based, our index is zero based */ ep_index = TRB_TO_EP_ID(event->flags) - 1; xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); - ep_ring = xdev->ep_rings[ep_index]; + ep = &xdev->eps[ep_index]; + ep_ring = ep->ring; ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n"); @@ -870,7 +976,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, (unsigned int) event->flags); /* Look for common error cases */ - switch (GET_COMP_CODE(event->transfer_len)) { + trb_comp_code = GET_COMP_CODE(event->transfer_len); + switch (trb_comp_code) { /* Skip codes that require special handling depending on * transfer type */ @@ -885,7 +992,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_STALL: xhci_warn(xhci, "WARN: Stalled endpoint\n"); - ep_ring->state |= EP_HALTED; + ep->ep_state |= EP_HALTED; status = -EPIPE; break; case COMP_TRB_ERR: @@ -913,7 +1020,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Was this a control transfer? */ if (usb_endpoint_xfer_control(&td->urb->ep->desc)) { xhci_debug_trb(xhci, xhci->event_ring->dequeue); - switch (GET_COMP_CODE(event->transfer_len)) { + switch (trb_comp_code) { case COMP_SUCCESS: if (event_trb == ep_ring->dequeue) { xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n"); @@ -928,8 +1035,37 @@ static int handle_tx_event(struct xhci_hcd *xhci, break; case COMP_SHORT_TX: xhci_warn(xhci, "WARN: short transfer on control ep\n"); - status = -EREMOTEIO; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; break; + case COMP_BABBLE: + /* The 0.96 spec says a babbling control endpoint + * is not halted. The 0.96 spec says it is. Some HW + * claims to be 0.95 compliant, but it halts the control + * endpoint anyway. Check if a babble halted the + * endpoint. + */ + if (ep_ctx->ep_info != EP_STATE_HALTED) + break; + /* else fall through */ + case COMP_STALL: + /* Did we transfer part of the data (middle) phase? */ + if (event_trb != ep_ring->dequeue && + event_trb != td->last_trb) + td->urb->actual_length = + td->urb->transfer_buffer_length + - TRB_LEN(event->transfer_len); + else + td->urb->actual_length = 0; + + ep->stopped_td = td; + ep->stopped_trb = event_trb; + xhci_queue_reset_ep(xhci, slot_id, ep_index); + xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); + xhci_ring_cmd_db(xhci); + goto td_cleanup; default: /* Others already handled above */ break; @@ -943,7 +1079,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (event_trb == td->last_trb) { if (td->urb->actual_length != 0) { /* Don't overwrite a previously set error code */ - if (status == -EINPROGRESS || status == 0) + if ((status == -EINPROGRESS || + status == 0) && + (td->urb->transfer_flags + & URB_SHORT_NOT_OK)) /* Did we already see a short data stage? */ status = -EREMOTEIO; } else { @@ -952,7 +1091,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, } } else { /* Maybe the event was for the data stage? */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) { + if (trb_comp_code != COMP_STOP_INVAL) { /* We didn't stop on a link TRB in the middle */ td->urb->actual_length = td->urb->transfer_buffer_length - @@ -964,7 +1103,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, } } } else { - switch (GET_COMP_CODE(event->transfer_len)) { + switch (trb_comp_code) { case COMP_SUCCESS: /* Double check that the HW transferred everything. */ if (event_trb != td->last_trb) { @@ -975,7 +1114,12 @@ static int handle_tx_event(struct xhci_hcd *xhci, else status = 0; } else { - xhci_dbg(xhci, "Successful bulk transfer!\n"); + if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) + xhci_dbg(xhci, "Successful bulk " + "transfer!\n"); + else + xhci_dbg(xhci, "Successful interrupt " + "transfer!\n"); status = 0; } break; @@ -1001,11 +1145,17 @@ static int handle_tx_event(struct xhci_hcd *xhci, td->urb->actual_length = td->urb->transfer_buffer_length - TRB_LEN(event->transfer_len); - if (td->urb->actual_length < 0) { + if (td->urb->transfer_buffer_length < + td->urb->actual_length) { xhci_warn(xhci, "HC gave bad length " "of %d bytes left\n", TRB_LEN(event->transfer_len)); td->urb->actual_length = 0; + if (td->urb->transfer_flags & + URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; } /* Don't overwrite a previously set error code */ if (status == -EINPROGRESS) { @@ -1041,30 +1191,31 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* If the ring didn't stop on a Link or No-op TRB, add * in the actual bytes transferred from the Normal TRB */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) + if (trb_comp_code != COMP_STOP_INVAL) td->urb->actual_length += TRB_LEN(cur_trb->generic.field[2]) - TRB_LEN(event->transfer_len); } } - if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL || - GET_COMP_CODE(event->transfer_len) == COMP_STOP) { + if (trb_comp_code == COMP_STOP_INVAL || + trb_comp_code == COMP_STOP) { /* The Endpoint Stop Command completion will take care of any * stopped TDs. A stopped TD may be restarted, so don't update * the ring dequeue pointer or take this TD off any lists yet. */ - ep_ring->stopped_td = td; - ep_ring->stopped_trb = event_trb; + ep->stopped_td = td; + ep->stopped_trb = event_trb; } else { - if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) { + if (trb_comp_code == COMP_STALL || + trb_comp_code == COMP_BABBLE) { /* The transfer is completed from the driver's * perspective, but we need to issue a set dequeue * command for this stalled endpoint to move the dequeue * pointer past the TD. We can't do that here because * the halt condition must be cleared first. */ - ep_ring->stopped_td = td; - ep_ring->stopped_trb = event_trb; + ep->stopped_td = td; + ep->stopped_trb = event_trb; } else { /* Update ring dequeue pointer */ while (ep_ring->dequeue != td->last_trb) @@ -1072,16 +1223,41 @@ static int handle_tx_event(struct xhci_hcd *xhci, inc_deq(xhci, ep_ring, false); } +td_cleanup: /* Clean up the endpoint's TD list */ urb = td->urb; + /* Do one last check of the actual transfer length. + * If the host controller said we transferred more data than + * the buffer length, urb->actual_length will be a very big + * number (since it's unsigned). Play it safe and say we didn't + * transfer anything. + */ + if (urb->actual_length > urb->transfer_buffer_length) { + xhci_warn(xhci, "URB transfer length is wrong, " + "xHC issue? req. len = %u, " + "act. len = %u\n", + urb->transfer_buffer_length, + urb->actual_length); + urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + status = -EREMOTEIO; + else + status = 0; + } list_del(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) { list_del(&td->cancelled_td_list); - ep_ring->cancels_pending--; + ep->cancels_pending--; } - /* Leave the TD around for the reset endpoint function to use */ - if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) { + /* Leave the TD around for the reset endpoint function to use + * (but only if it's not a control endpoint, since we already + * queued the Set TR dequeue pointer command for stalled + * control endpoints). + */ + if (usb_endpoint_xfer_control(&urb->ep->desc) || + (trb_comp_code != COMP_STALL && + trb_comp_code != COMP_BABBLE)) { kfree(td); } urb->hcpriv = NULL; @@ -1094,7 +1270,7 @@ cleanup: if (urb) { usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n", - urb, td->urb->actual_length, status); + urb, urb->actual_length, status); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); spin_lock(&xhci->lock); @@ -1235,7 +1411,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, { int ret; struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - ret = prepare_ring(xhci, xdev->ep_rings[ep_index], + ret = prepare_ring(xhci, xdev->eps[ep_index].ring, ep_ctx->ep_info & EP_STATE_MASK, num_trbs, mem_flags); if (ret) @@ -1255,9 +1431,9 @@ static int prepare_transfer(struct xhci_hcd *xhci, (*td)->urb = urb; urb->hcpriv = (void *) (*td); /* Add this TD to the tail of the endpoint ring's TD list */ - list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list); - (*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg; - (*td)->first_trb = xdev->ep_rings[ep_index]->enqueue; + list_add_tail(&(*td)->td_list, &xdev->eps[ep_index].ring->td_list); + (*td)->start_seg = xdev->eps[ep_index].ring->enq_seg; + (*td)->first_trb = xdev->eps[ep_index].ring->enqueue; return 0; } @@ -1335,6 +1511,47 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, ring_ep_doorbell(xhci, slot_id, ep_index); } +/* + * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt + * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD + * (comprised of sg list entries) can take several service intervals to + * transmit. + */ +int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, + xhci->devs[slot_id]->out_ctx, ep_index); + int xhci_interval; + int ep_interval; + + xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info); + ep_interval = urb->interval; + /* Convert to microframes */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + ep_interval *= 8; + /* FIXME change this to a warning and a suggestion to use the new API + * to set the polling interval (once the API is added). + */ + if (xhci_interval != ep_interval) { + if (!printk_ratelimit()) + dev_dbg(&urb->dev->dev, "Driver uses different interval" + " (%d microframe%s) than xHCI " + "(%d microframe%s)\n", + ep_interval, + ep_interval == 1 ? "" : "s", + xhci_interval, + xhci_interval == 1 ? "" : "s"); + urb->interval = xhci_interval; + /* Convert back to frames for LS/FS devices */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->interval /= 8; + } + return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); +} + static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) { @@ -1350,7 +1567,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_generic_trb *start_trb; int start_cycle; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; num_trbs = count_sg_trbs_needed(xhci, urb); num_sgs = urb->num_sgs; @@ -1483,7 +1700,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->sg) return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ @@ -1594,7 +1811,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, u32 field, length_field; struct xhci_td *td; - ep_ring = xhci->devs[slot_id]->ep_rings[ep_index]; + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; /* * Need to copy setup packet into setup TRB, so we can't use the setup @@ -1677,12 +1894,27 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /**** Command Ring Operations ****/ -/* Generic function for queueing a command TRB on the command ring */ -static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4) +/* Generic function for queueing a command TRB on the command ring. + * Check to make sure there's room on the command ring for one command TRB. + * Also check that there's room reserved for commands that must not fail. + * If this is a command that must not fail, meaning command_must_succeed = TRUE, + * then only check for the number of reserved spots. + * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB + * because the command event handler may want to resubmit a failed command. + */ +static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, + u32 field3, u32 field4, bool command_must_succeed) { - if (!room_on_ring(xhci, xhci->cmd_ring, 1)) { + int reserved_trbs = xhci->cmd_ring_reserved_trbs; + if (!command_must_succeed) + reserved_trbs++; + + if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) { if (!in_interrupt()) xhci_err(xhci, "ERR: No room for command on command ring\n"); + if (command_must_succeed) + xhci_err(xhci, "ERR: Reserved TRB counting for " + "unfailable commands failed.\n"); return -ENOMEM; } queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, @@ -1693,7 +1925,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 fiel /* Queue a no-op command on the command ring */ static int queue_cmd_noop(struct xhci_hcd *xhci) { - return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP)); + return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false); } /* @@ -1712,7 +1944,7 @@ void *xhci_setup_one_noop(struct xhci_hcd *xhci) int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) { return queue_command(xhci, 0, 0, 0, - TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue an address device command TRB */ @@ -1721,16 +1953,28 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, - TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id), + false); } /* Queue a configure endpoint command TRB */ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, + u32 slot_id, bool command_must_succeed) +{ + return queue_command(xhci, lower_32_bits(in_ctx_ptr), + upper_32_bits(in_ctx_ptr), 0, + TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id), + command_must_succeed); +} + +/* Queue an evaluate context command TRB */ +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id) { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, - TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id)); + TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), + false); } int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, @@ -1741,7 +1985,7 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, u32 type = TRB_TYPE(TRB_STOP_RING); return queue_command(xhci, 0, 0, 0, - trb_slot_id | trb_ep_index | type); + trb_slot_id | trb_ep_index | type, false); } /* Set Transfer Ring Dequeue Pointer command. @@ -1765,7 +2009,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, } return queue_command(xhci, lower_32_bits(addr) | cycle_state, upper_32_bits(addr), 0, - trb_slot_id | trb_ep_index | type); + trb_slot_id | trb_ep_index | type, false); } int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, @@ -1775,5 +2019,6 @@ int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_RESET_EP); - return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type); + return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type, + false); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d31d32206ba..4b254b6fa24 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -509,6 +509,8 @@ struct xhci_slot_ctx { #define MAX_EXIT (0xffff) /* Root hub port number that is needed to access the USB device */ #define ROOT_HUB_PORT(p) (((p) & 0xff) << 16) +/* Maximum number of ports under a hub device */ +#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24) /* tt_info bitmasks */ /* @@ -522,6 +524,7 @@ struct xhci_slot_ctx { * '0' if the device is not low or full speed. */ #define TT_PORT (0xff << 8) +#define TT_THINK_TIME(p) (((p) & 0x3) << 16) /* dev_state bitmasks */ /* USB device address - assigned by the HC */ @@ -581,6 +584,7 @@ struct xhci_ep_ctx { /* bit 15 is Linear Stream Array */ /* Interval - period between requests to an endpoint - 125u increments. */ #define EP_INTERVAL(p) ((p & 0xff) << 16) +#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff)) /* ep_info2 bitmasks */ /* @@ -589,6 +593,7 @@ struct xhci_ep_ctx { */ #define FORCE_EVENT (0x1) #define ERROR_COUNT(p) (((p) & 0x3) << 1) +#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) #define EP_TYPE(p) ((p) << 3) #define ISOC_OUT_EP 1 #define BULK_OUT_EP 2 @@ -601,6 +606,8 @@ struct xhci_ep_ctx { /* bit 7 is Host Initiate Disable - for disabling stream selection */ #define MAX_BURST(p) (((p)&0xff) << 8) #define MAX_PACKET(p) (((p)&0xffff) << 16) +#define MAX_PACKET_MASK (0xffff << 16) +#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) /** @@ -616,11 +623,44 @@ struct xhci_input_control_ctx { u32 rsvd2[6]; }; +/* Represents everything that is needed to issue a command on the command ring. + * It's useful to pre-allocate these for commands that cannot fail due to + * out-of-memory errors, like freeing streams. + */ +struct xhci_command { + /* Input context for changing device state */ + struct xhci_container_ctx *in_ctx; + u32 status; + /* If completion is null, no one is waiting on this command + * and the structure can be freed after the command completes. + */ + struct completion *completion; + union xhci_trb *command_trb; + struct list_head cmd_list; +}; + /* drop context bitmasks */ #define DROP_EP(x) (0x1 << x) /* add context bitmasks */ #define ADD_EP(x) (0x1 << x) +struct xhci_virt_ep { + struct xhci_ring *ring; + /* Temporary storage in case the configure endpoint command fails and we + * have to restore the device state to the previous state + */ + struct xhci_ring *new_ring; + unsigned int ep_state; +#define SET_DEQ_PENDING (1 << 0) +#define EP_HALTED (1 << 1) + /* ---- Related to URB cancellation ---- */ + struct list_head cancelled_td_list; + unsigned int cancels_pending; + /* The TRB that was last reported in a stopped endpoint ring */ + union xhci_trb *stopped_trb; + struct xhci_td *stopped_td; +}; + struct xhci_virt_device { /* * Commands to the hardware are passed an "input context" that @@ -633,16 +673,11 @@ struct xhci_virt_device { struct xhci_container_ctx *out_ctx; /* Used for addressing devices and configuration changes */ struct xhci_container_ctx *in_ctx; - - /* FIXME when stream support is added */ - struct xhci_ring *ep_rings[31]; - /* Temporary storage in case the configure endpoint command fails and we - * have to restore the device state to the previous state - */ - struct xhci_ring *new_ep_rings[31]; + struct xhci_virt_ep eps[31]; struct completion cmd_completion; /* Status of the last command issued for this device */ u32 cmd_status; + struct list_head cmd_list; }; @@ -905,6 +940,8 @@ union xhci_trb { * It must also be greater than 16. */ #define TRBS_PER_SEGMENT 64 +/* Allow two commands + a link TRB, along with any reserved command TRBs */ +#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define SEGMENT_SIZE (TRBS_PER_SEGMENT*16) /* TRB buffer pointers can't cross 64KB boundaries */ #define TRB_MAX_BUFF_SHIFT 16 @@ -926,6 +963,12 @@ struct xhci_td { union xhci_trb *last_trb; }; +struct xhci_dequeue_state { + struct xhci_segment *new_deq_seg; + union xhci_trb *new_deq_ptr; + int new_cycle_state; +}; + struct xhci_ring { struct xhci_segment *first_seg; union xhci_trb *enqueue; @@ -935,15 +978,6 @@ struct xhci_ring { struct xhci_segment *deq_seg; unsigned int deq_updates; struct list_head td_list; - /* ---- Related to URB cancellation ---- */ - struct list_head cancelled_td_list; - unsigned int cancels_pending; - unsigned int state; -#define SET_DEQ_PENDING (1 << 0) -#define EP_HALTED (1 << 1) - /* The TRB that was last reported in a stopped endpoint ring */ - union xhci_trb *stopped_trb; - struct xhci_td *stopped_td; /* * Write the cycle state into the TRB cycle field to give ownership of * the TRB to the host controller (if we are the producer), or to check @@ -952,12 +986,6 @@ struct xhci_ring { u32 cycle_state; }; -struct xhci_dequeue_state { - struct xhci_segment *new_deq_seg; - union xhci_trb *new_deq_ptr; - int new_cycle_state; -}; - struct xhci_erst_entry { /* 64-bit event ring segment address */ u64 seg_addr; @@ -1034,6 +1062,7 @@ struct xhci_hcd { /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; + unsigned int cmd_ring_reserved_trbs; struct xhci_ring *event_ring; struct xhci_erst erst; /* Scratchpad */ @@ -1058,6 +1087,9 @@ struct xhci_hcd { int noops_submitted; int noops_handled; int error_bitmask; + unsigned int quirks; +#define XHCI_LINK_TRB_QUIRK (1 << 0) +#define XHCI_RESET_EP_QUIRK (1 << 1) }; /* For testing purposes */ @@ -1136,6 +1168,13 @@ static inline void xhci_write_64(struct xhci_hcd *xhci, writel(val_hi, ptr + 1); } +static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) +{ + u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase); + return ((HC_VERSION(temp) == 0x95) && + (xhci->quirks & XHCI_LINK_TRB_QUIRK)); +} + /* xHCI debugging */ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); @@ -1150,7 +1189,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); -/* xHCI memory managment */ +/* xHCI memory management */ void xhci_mem_cleanup(struct xhci_hcd *xhci); int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); @@ -1158,11 +1197,24 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); +unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); +unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); +void xhci_endpoint_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx, + unsigned int ep_index); +void xhci_slot_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx); int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_device *udev, struct usb_host_endpoint *ep, gfp_t mem_flags); void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); +struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, + bool allocate_completion, gfp_t mem_flags); +void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command); #ifdef CONFIG_PCI /* xHCI PCI glue */ @@ -1182,6 +1234,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev); +int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); @@ -1205,7 +1259,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); +int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, + int slot_id, unsigned int ep_index); int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, + u32 slot_id, bool command_must_succeed); +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); @@ -1213,8 +1271,13 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_td *cur_td, struct xhci_dequeue_state *state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, - struct xhci_ring *ep_ring, unsigned int slot_id, - unsigned int ep_index, struct xhci_dequeue_state *deq_state); + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state); +void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, + struct usb_device *udev, unsigned int ep_index); +void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state); /* xHCI roothub code */ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 4541dfcea88..459a7287fe0 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -653,33 +653,6 @@ static struct scsi_host_template mts_scsi_host_template = { .max_sectors= 256, /* 128 K */ }; -struct vendor_product -{ - char* name; - enum - { - mts_sup_unknown=0, - mts_sup_alpha, - mts_sup_full - } - support_status; -} ; - - -/* These are taken from the msmUSB.inf file on the Windows driver CD */ -static const struct vendor_product mts_supported_products[] = -{ - { "Phantom 336CX", mts_sup_unknown}, - { "Phantom 336CX", mts_sup_unknown}, - { "Scanmaker X6", mts_sup_alpha}, - { "Phantom C6", mts_sup_unknown}, - { "Phantom 336CX", mts_sup_unknown}, - { "ScanMaker V6USL", mts_sup_unknown}, - { "ScanMaker V6USL", mts_sup_unknown}, - { "Scanmaker V6UL", mts_sup_unknown}, - { "Scanmaker V6UPL", mts_sup_alpha}, -}; - /* The entries of microtek_table must correspond, line-by-line to the entries of mts_supported_products[]. */ @@ -711,7 +684,6 @@ static int mts_usb_probe(struct usb_interface *intf, int err_retval = -ENOMEM; struct mts_desc * new_desc; - struct vendor_product const* p; struct usb_device *dev = interface_to_usbdev (intf); /* the current altsetting on the interface we're probing */ @@ -726,15 +698,6 @@ static int mts_usb_probe(struct usb_interface *intf, MTS_DEBUG_GOT_HERE(); - p = &mts_supported_products[id - mts_usb_ids]; - - MTS_DEBUG_GOT_HERE(); - - MTS_DEBUG( "found model %s\n", p->name ); - if ( p->support_status != mts_sup_full ) - MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n", - p->name ); - /* the current altsetting on the interface we're probing */ altsetting = intf->cur_altsetting; diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 6da8887538c..1337a9ce80b 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -96,6 +96,8 @@ static int idmouse_probe(struct usb_interface *interface, const struct usb_device_id *id); static void idmouse_disconnect(struct usb_interface *interface); +static int idmouse_suspend(struct usb_interface *intf, pm_message_t message); +static int idmouse_resume(struct usb_interface *intf); /* file operation pointers */ static const struct file_operations idmouse_fops = { @@ -117,7 +119,11 @@ static struct usb_driver idmouse_driver = { .name = DRIVER_SHORT, .probe = idmouse_probe, .disconnect = idmouse_disconnect, + .suspend = idmouse_suspend, + .resume = idmouse_resume, + .reset_resume = idmouse_resume, .id_table = idmouse_table, + .supports_autosuspend = 1, }; static int idmouse_create_image(struct usb_idmouse *dev) @@ -197,6 +203,17 @@ reset: return result; } +/* PM operations are nops as this driver does IO only during open() */ +static int idmouse_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static int idmouse_resume(struct usb_interface *intf) +{ + return 0; +} + static inline void idmouse_delete(struct usb_idmouse *dev) { kfree(dev->bulk_in_buffer); @@ -235,9 +252,13 @@ static int idmouse_open(struct inode *inode, struct file *file) } else { /* create a new image and check for success */ + result = usb_autopm_get_interface(interface); + if (result) + goto error; result = idmouse_create_image (dev); if (result) goto error; + usb_autopm_put_interface(interface); /* increment our usage count for the driver */ ++dev->open; diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index ad4fb15b5dc..90f130126c1 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -412,6 +412,9 @@ static unsigned int ld_usb_poll(struct file *file, poll_table *wait) dev = file->private_data; + if (!dev->intf) + return POLLERR | POLLHUP; + poll_wait(file, &dev->read_wait, wait); poll_wait(file, &dev->write_wait, wait); @@ -767,6 +770,9 @@ static void ld_usb_disconnect(struct usb_interface *intf) ld_usb_delete(dev); } else { dev->intf = NULL; + /* wake up pollers */ + wake_up_interruptible_all(&dev->read_wait); + wake_up_interruptible_all(&dev->write_wait); mutex_unlock(&dev->mutex); } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 97efeaec4d5..faa6d623de7 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -552,6 +552,9 @@ static unsigned int tower_poll (struct file *file, poll_table *wait) dev = file->private_data; + if (!dev->udev) + return POLLERR | POLLHUP; + poll_wait(file, &dev->read_wait, wait); poll_wait(file, &dev->write_wait, wait); @@ -1025,6 +1028,9 @@ static void tower_disconnect (struct usb_interface *interface) tower_delete (dev); } else { dev->udev = NULL; + /* wake up pollers */ + wake_up_interruptible_all(&dev->read_wait); + wake_up_interruptible_all(&dev->write_wait); mutex_unlock(&dev->lock); } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index b4ec716de7d..0025847743f 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -79,14 +79,12 @@ sisusb_free_buffers(struct sisusb_usb_data *sisusb) for (i = 0; i < NUMOBUFS; i++) { if (sisusb->obuf[i]) { - usb_buffer_free(sisusb->sisusb_dev, sisusb->obufsize, - sisusb->obuf[i], sisusb->transfer_dma_out[i]); + kfree(sisusb->obuf[i]); sisusb->obuf[i] = NULL; } } if (sisusb->ibuf) { - usb_buffer_free(sisusb->sisusb_dev, sisusb->ibufsize, - sisusb->ibuf, sisusb->transfer_dma_in); + kfree(sisusb->ibuf); sisusb->ibuf = NULL; } } @@ -230,8 +228,7 @@ sisusb_bulk_completeout(struct urb *urb) static int sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, void *data, - int len, int *actual_length, int timeout, unsigned int tflags, - dma_addr_t transfer_dma) + int len, int *actual_length, int timeout, unsigned int tflags) { struct urb *urb = sisusb->sisurbout[index]; int retval, byteswritten = 0; @@ -245,9 +242,6 @@ sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index, unsigned int pipe, urb->transfer_flags |= tflags; urb->actual_length = 0; - if ((urb->transfer_dma = transfer_dma)) - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* Set up context */ sisusb->urbout_context[index].actual_length = (timeout) ? NULL : actual_length; @@ -297,8 +291,8 @@ sisusb_bulk_completein(struct urb *urb) } static int -sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, int len, - int *actual_length, int timeout, unsigned int tflags, dma_addr_t transfer_dma) +sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, + int len, int *actual_length, int timeout, unsigned int tflags) { struct urb *urb = sisusb->sisurbin; int retval, readbytes = 0; @@ -311,9 +305,6 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data, urb->transfer_flags |= tflags; urb->actual_length = 0; - if ((urb->transfer_dma = transfer_dma)) - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - sisusb->completein = 0; retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval == 0) { @@ -422,8 +413,7 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, thispass, &transferred_len, async ? 0 : 5 * HZ, - tflags, - sisusb->transfer_dma_out[index]); + tflags); if (result == -ETIMEDOUT) { @@ -432,29 +422,16 @@ static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, return -ETIME; continue; + } - } else if ((result == 0) && !async && transferred_len) { + if ((result == 0) && !async && transferred_len) { thispass -= transferred_len; - if (thispass) { - if (sisusb->transfer_dma_out) { - /* If DMA, copy remaining - * to beginning of buffer - */ - memcpy(buffer, - buffer + transferred_len, - thispass); - } else { - /* If not DMA, simply increase - * the pointer - */ - buffer += transferred_len; - } - } + buffer += transferred_len; } else break; - }; + } if (result) return result; @@ -530,8 +507,7 @@ static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len, thispass, &transferred_len, 5 * HZ, - tflags, - sisusb->transfer_dma_in); + tflags); if (transferred_len) thispass = transferred_len; @@ -3132,8 +3108,7 @@ static int sisusb_probe(struct usb_interface *intf, /* Allocate buffers */ sisusb->ibufsize = SISUSB_IBUF_SIZE; - if (!(sisusb->ibuf = usb_buffer_alloc(dev, SISUSB_IBUF_SIZE, - GFP_KERNEL, &sisusb->transfer_dma_in))) { + if (!(sisusb->ibuf = kmalloc(SISUSB_IBUF_SIZE, GFP_KERNEL))) { dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for input buffer"); retval = -ENOMEM; goto error_2; @@ -3142,9 +3117,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->numobufs = 0; sisusb->obufsize = SISUSB_OBUF_SIZE; for (i = 0; i < NUMOBUFS; i++) { - if (!(sisusb->obuf[i] = usb_buffer_alloc(dev, SISUSB_OBUF_SIZE, - GFP_KERNEL, - &sisusb->transfer_dma_out[i]))) { + if (!(sisusb->obuf[i] = kmalloc(SISUSB_OBUF_SIZE, GFP_KERNEL))) { if (i == 0) { dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for output buffer\n"); retval = -ENOMEM; diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h index cf0b4a5883f..55492a5930b 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.h +++ b/drivers/usb/misc/sisusbvga/sisusb.h @@ -123,8 +123,6 @@ struct sisusb_usb_data { int numobufs; /* number of obufs = number of out urbs */ char *obuf[NUMOBUFS], *ibuf; /* transfer buffers */ int obufsize, ibufsize; - dma_addr_t transfer_dma_out[NUMOBUFS]; - dma_addr_t transfer_dma_in; struct urb *sisurbout[NUMOBUFS]; struct urb *sisurbin; unsigned char urbstatus[NUMOBUFS]; diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 28a6a3a0953..3db255537e7 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -38,6 +38,7 @@ static char *display_textmodes[] = {"raw", "hex", "ascii", NULL}; struct usb_sevsegdev { struct usb_device *udev; + struct usb_interface *intf; u8 powered; u8 mode_msb; @@ -46,6 +47,8 @@ struct usb_sevsegdev { u8 textmode; u8 text[MAXLEN]; u16 textlength; + + u8 shadow_power; /* for PM */ }; /* sysfs_streq can't replace this completely @@ -65,6 +68,12 @@ static void update_display_powered(struct usb_sevsegdev *mydev) { int rc; + if (!mydev->shadow_power && mydev->powered) { + rc = usb_autopm_get_interface(mydev->intf); + if (rc < 0) + return; + } + rc = usb_control_msg(mydev->udev, usb_sndctrlpipe(mydev->udev, 0), 0x12, @@ -76,12 +85,18 @@ static void update_display_powered(struct usb_sevsegdev *mydev) 2000); if (rc < 0) dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc); + + if (mydev->shadow_power && !mydev->powered) + usb_autopm_put_interface(mydev->intf); } static void update_display_mode(struct usb_sevsegdev *mydev) { int rc; + if(mydev->shadow_power != 1) + return; + rc = usb_control_msg(mydev->udev, usb_sndctrlpipe(mydev->udev, 0), 0x12, @@ -96,14 +111,17 @@ static void update_display_mode(struct usb_sevsegdev *mydev) dev_dbg(&mydev->udev->dev, "mode retval = %d\n", rc); } -static void update_display_visual(struct usb_sevsegdev *mydev) +static void update_display_visual(struct usb_sevsegdev *mydev, gfp_t mf) { int rc; int i; unsigned char *buffer; u8 decimals = 0; - buffer = kzalloc(MAXLEN, GFP_KERNEL); + if(mydev->shadow_power != 1) + return; + + buffer = kzalloc(MAXLEN, mf); if (!buffer) { dev_err(&mydev->udev->dev, "out of memory\n"); return; @@ -163,7 +181,7 @@ static ssize_t set_attr_##name(struct device *dev, \ struct usb_sevsegdev *mydev = usb_get_intfdata(intf); \ \ mydev->name = simple_strtoul(buf, NULL, 10); \ - update_fcn(mydev); \ + update_fcn(mydev); \ \ return count; \ } \ @@ -194,7 +212,7 @@ static ssize_t set_attr_text(struct device *dev, if (end > 0) memcpy(mydev->text, buf, end); - update_display_visual(mydev); + update_display_visual(mydev, GFP_KERNEL); return count; } @@ -242,7 +260,7 @@ static ssize_t set_attr_decimals(struct device *dev, if (buf[i] == '1') mydev->decimals[end-1-i] = 1; - update_display_visual(mydev); + update_display_visual(mydev, GFP_KERNEL); return count; } @@ -286,7 +304,7 @@ static ssize_t set_attr_textmode(struct device *dev, for (i = 0; display_textmodes[i]; i++) { if (sysfs_streq(display_textmodes[i], buf)) { mydev->textmode = i; - update_display_visual(mydev); + update_display_visual(mydev, GFP_KERNEL); return count; } } @@ -330,6 +348,7 @@ static int sevseg_probe(struct usb_interface *interface, } mydev->udev = usb_get_dev(udev); + mydev->intf = interface; usb_set_intfdata(interface, mydev); /*set defaults */ @@ -364,11 +383,49 @@ static void sevseg_disconnect(struct usb_interface *interface) dev_info(&interface->dev, "USB 7 Segment now disconnected\n"); } +static int sevseg_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_sevsegdev *mydev; + + mydev = usb_get_intfdata(intf); + mydev->shadow_power = 0; + + return 0; +} + +static int sevseg_resume(struct usb_interface *intf) +{ + struct usb_sevsegdev *mydev; + + mydev = usb_get_intfdata(intf); + mydev->shadow_power = 1; + update_display_mode(mydev); + update_display_visual(mydev, GFP_NOIO); + + return 0; +} + +static int sevseg_reset_resume(struct usb_interface *intf) +{ + struct usb_sevsegdev *mydev; + + mydev = usb_get_intfdata(intf); + mydev->shadow_power = 1; + update_display_mode(mydev); + update_display_visual(mydev, GFP_NOIO); + + return 0; +} + static struct usb_driver sevseg_driver = { .name = "usbsevseg", .probe = sevseg_probe, .disconnect = sevseg_disconnect, + .suspend = sevseg_suspend, + .resume = sevseg_resume, + .reset_resume = sevseg_reset_resume, .id_table = id_table, + .supports_autosuspend = 1, }; static int __init usb_sevseg_init(void) diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig index f28f350cd96..635745f57fb 100644 --- a/drivers/usb/mon/Kconfig +++ b/drivers/usb/mon/Kconfig @@ -5,11 +5,9 @@ config USB_MON tristate "USB Monitor" depends on USB - default y if USB=y - default m if USB=m help If you select this option, a component which captures the USB traffic between peripheral-specific drivers and HC drivers will be built. For more information, see <file:Documentation/usb/usbmon.txt>. - If unsure, say Y (if allowed), otherwise M. + If unsure, say Y, if allowed, otherwise M. diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile index c6516b56673..384b198faa7 100644 --- a/drivers/usb/mon/Makefile +++ b/drivers/usb/mon/Makefile @@ -2,6 +2,6 @@ # Makefile for USB monitor # -usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o mon_dma.o +usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o obj-$(CONFIG_USB_MON) += usbmon.o diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 0f7a30b7d2d..dfdc43e2e00 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -220,9 +220,8 @@ static void mon_free_buff(struct mon_pgmap *map, int npages); /* * This is a "chunked memcpy". It does not manipulate any counters. - * But it returns the new offset for repeated application. */ -unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, +static void mon_copy_to_buff(const struct mon_reader_bin *this, unsigned int off, const unsigned char *from, unsigned int length) { unsigned int step_len; @@ -247,7 +246,6 @@ unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, from += step_len; length -= step_len; } - return off; } /* @@ -400,15 +398,8 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp, unsigned int offset, struct urb *urb, unsigned int length) { - if (urb->dev->bus->uses_dma && - (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - mon_dmapeek_vec(rp, offset, urb->transfer_dma, length); - return 0; - } - if (urb->transfer_buffer == NULL) return 'Z'; - mon_copy_to_buff(rp, offset, urb->transfer_buffer, length); return 0; } @@ -635,7 +626,6 @@ static int mon_bin_open(struct inode *inode, struct file *file) spin_lock_init(&rp->b_lock); init_waitqueue_head(&rp->b_wait); mutex_init(&rp->fetch_lock); - rp->b_size = BUFF_DFL; size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE); diff --git a/drivers/usb/mon/mon_dma.c b/drivers/usb/mon/mon_dma.c deleted file mode 100644 index 140cc80bd2b..00000000000 --- a/drivers/usb/mon/mon_dma.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * The USB Monitor, inspired by Dave Harding's USBMon. - * - * mon_dma.c: Library which snoops on DMA areas. - * - * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com) - */ -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/highmem.h> -#include <asm/page.h> - -#include <linux/usb.h> /* Only needed for declarations in usb_mon.h */ -#include "usb_mon.h" - -/* - * PC-compatibles, are, fortunately, sufficiently cache-coherent for this. - */ -#if defined(__i386__) || defined(__x86_64__) /* CONFIG_ARCH_I386 doesn't exit */ -#define MON_HAS_UNMAP 1 - -#define phys_to_page(phys) pfn_to_page((phys) >> PAGE_SHIFT) - -char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) -{ - struct page *pg; - unsigned long flags; - unsigned char *map; - unsigned char *ptr; - - /* - * On i386, a DMA handle is the "physical" address of a page. - * In other words, the bus address is equal to physical address. - * There is no IOMMU. - */ - pg = phys_to_page(dma_addr); - - /* - * We are called from hardware IRQs in case of callbacks. - * But we can be called from softirq or process context in case - * of submissions. In such case, we need to protect KM_IRQ0. - */ - local_irq_save(flags); - map = kmap_atomic(pg, KM_IRQ0); - ptr = map + (dma_addr & (PAGE_SIZE-1)); - memcpy(dst, ptr, len); - kunmap_atomic(map, KM_IRQ0); - local_irq_restore(flags); - return 0; -} - -void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int length) -{ - unsigned long flags; - unsigned int step_len; - struct page *pg; - unsigned char *map; - unsigned long page_off, page_len; - - local_irq_save(flags); - while (length) { - /* compute number of bytes we are going to copy in this page */ - step_len = length; - page_off = dma_addr & (PAGE_SIZE-1); - page_len = PAGE_SIZE - page_off; - if (page_len < step_len) - step_len = page_len; - - /* copy data and advance pointers */ - pg = phys_to_page(dma_addr); - map = kmap_atomic(pg, KM_IRQ0); - offset = mon_copy_to_buff(rp, offset, map + page_off, step_len); - kunmap_atomic(map, KM_IRQ0); - dma_addr += step_len; - length -= step_len; - } - local_irq_restore(flags); -} - -#endif /* __i386__ */ - -#ifndef MON_HAS_UNMAP -char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len) -{ - return 'D'; -} - -void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int length) -{ - ; -} - -#endif /* MON_HAS_UNMAP */ diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 5e0ab4201c0..e0c2db3b767 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -361,7 +361,6 @@ static int __init mon_init(void) } // MOD_INC_USE_COUNT(which_module?); - mutex_lock(&usb_bus_list_lock); list_for_each_entry (ubus, &usb_bus_list, bus_list) { mon_bus_init(ubus); diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index a7eb4c99342..9f1a9227ebe 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -150,20 +150,6 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, return '>'; } - /* - * The check to see if it's safe to poke at data has an enormous - * number of corner cases, but it seems that the following is - * more or less safe. - * - * We do not even try to look at transfer_buffer, because it can - * contain non-NULL garbage in case the upper level promised to - * set DMA for the HCD. - */ - if (urb->dev->bus->uses_dma && - (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - return mon_dmapeek(ep->data, urb->transfer_dma, len); - } - if (urb->transfer_buffer == NULL) return 'Z'; /* '0' would be not as pretty. */ diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index f5d84ff8c10..df9a4df342c 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -65,20 +65,6 @@ int __init mon_bin_init(void); void mon_bin_exit(void); /* - * DMA interface. - * - * XXX The vectored side needs a serious re-thinking. Abstracting vectors, - * like in Paolo's original patch, produces a double pkmap. We need an idea. -*/ -extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len); - -struct mon_reader_bin; -extern void mon_dmapeek_vec(const struct mon_reader_bin *rp, - unsigned int offset, dma_addr_t dma_addr, unsigned int len); -extern unsigned int mon_copy_to_buff(const struct mon_reader_bin *rp, - unsigned int offset, const unsigned char *from, unsigned int len); - -/* */ extern struct mutex mon_lock; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1d26beddf2c..3a61ddb62bd 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1850,6 +1850,10 @@ static void musb_free(struct musb *musb) dma_controller_destroy(c); } +#ifdef CONFIG_USB_MUSB_OTG + put_device(musb->xceiv->dev); +#endif + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); musb_writeb(musb->mregs, MUSB_DEVCTL, 0); @@ -1859,10 +1863,6 @@ static void musb_free(struct musb *musb) clk_put(musb->clock); } -#ifdef CONFIG_USB_MUSB_OTG - put_device(musb->xceiv->dev); -#endif - #ifdef CONFIG_USB_MUSB_HDRC_HCD usb_put_hcd(musb_to_hcd(musb)); #else diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index e0d56ef2bcb..77a5f418899 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -117,24 +117,7 @@ static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) pr_debug(" VBUS %d mA error %d\n", mA, status); } -static void enable_vbus_source(struct isp1301 *isp) -{ - /* this board won't supply more than 8mA vbus power. - * some boards can switch a 100ma "unit load" (or more). - */ -} - - -/* products will deliver OTG messages with LEDs, GUI, etc */ -static inline void notresponding(struct isp1301 *isp) -{ - printk(KERN_NOTICE "OTG device not responding.\n"); -} - - -#endif - -#if defined(CONFIG_MACH_OMAP_H4) +#else static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) { @@ -144,6 +127,8 @@ static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) */ } +#endif + static void enable_vbus_source(struct isp1301 *isp) { /* this board won't supply more than 8mA vbus power. @@ -159,8 +144,6 @@ static inline void notresponding(struct isp1301 *isp) } -#endif - /*-------------------------------------------------------------------------*/ static struct i2c_driver isp1301_driver; diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 5d25d3e52bf..131e61adaaf 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -31,10 +31,20 @@ static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x6547, 0x0232) }, + { USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); +static int is_irda(struct usb_serial *serial) +{ + struct usb_device *dev = serial->dev; + if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec && + le16_to_cpu(dev->descriptor.idProduct) == 0x3118) + return 1; + return 0; +} + static inline void ARK3116_SND(struct usb_serial *serial, int seq, __u8 request, __u8 requesttype, __u16 value, __u16 index) @@ -84,11 +94,21 @@ static int ark3116_attach(struct usb_serial *serial) return -ENOMEM; } + if (is_irda(serial)) + dbg("IrDA mode"); + /* 3 */ ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002); ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001); ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008); - ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B); + ARK3116_SND(serial, 6, 0xFE, 0x40, is_irda(serial) ? 0x0001 : 0x0000, + 0x000B); + + if (is_irda(serial)) { + ARK3116_SND(serial, 1001, 0xFE, 0x40, 0x0000, 0x000C); + ARK3116_SND(serial, 1002, 0xFE, 0x40, 0x0041, 0x000D); + ARK3116_SND(serial, 1003, 0xFE, 0x40, 0x0001, 0x000A); + } /* <-- seq7 */ ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf); @@ -125,6 +145,8 @@ static int ark3116_attach(struct usb_serial *serial) ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003); ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000); ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001); + if (is_irda(serial)) + ARK3116_SND(serial, 1004, 0xFE, 0x40, 0x0000, 0x0009); ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003); ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf); ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 8c894a7d5dc..59eff721fcc 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -56,6 +56,18 @@ #define CH341_BAUDBASE_FACTOR 1532620800 #define CH341_BAUDBASE_DIVMAX 3 +/* Break support - the information used to implement this was gleaned from + * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato. + */ + +#define CH341_REQ_WRITE_REG 0x9A +#define CH341_REQ_READ_REG 0x95 +#define CH341_REG_BREAK1 0x05 +#define CH341_REG_BREAK2 0x18 +#define CH341_NBREAK_BITS_REG1 0x01 +#define CH341_NBREAK_BITS_REG2 0x40 + + static int debug; static struct usb_device_id id_table [] = { @@ -373,6 +385,45 @@ static void ch341_set_termios(struct tty_struct *tty, */ } +static void ch341_break_ctl(struct tty_struct *tty, int break_state) +{ + const uint16_t ch341_break_reg = + CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8); + struct usb_serial_port *port = tty->driver_data; + int r; + uint16_t reg_contents; + uint8_t break_reg[2]; + + dbg("%s()", __func__); + + r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, + ch341_break_reg, 0, break_reg, sizeof(break_reg)); + if (r < 0) { + printk(KERN_WARNING "%s: USB control read error whilst getting" + " break register contents.\n", __FILE__); + return; + } + dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x", + __func__, break_reg[0], break_reg[1]); + if (break_state != 0) { + dbg("%s - Enter break state requested", __func__); + break_reg[0] &= ~CH341_NBREAK_BITS_REG1; + break_reg[1] &= ~CH341_NBREAK_BITS_REG2; + } else { + dbg("%s - Leave break state requested", __func__); + break_reg[0] |= CH341_NBREAK_BITS_REG1; + break_reg[1] |= CH341_NBREAK_BITS_REG2; + } + dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x", + __func__, break_reg[0], break_reg[1]); + reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8); + r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, + ch341_break_reg, reg_contents); + if (r < 0) + printk(KERN_WARNING "%s: USB control write error whilst setting" + " break register contents.\n", __FILE__); +} + static int ch341_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { @@ -576,6 +627,7 @@ static struct usb_serial_driver ch341_device = { .close = ch341_close, .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, + .break_ctl = ch341_break_ctl, .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, .read_int_callback = ch341_read_int_callback, diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01ac3a..1fd360e0406 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 76a17f915ee..4f883b1773d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -176,6 +176,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, @@ -694,6 +697,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, @@ -702,6 +707,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 8c92b88166a..6f31e0d7189 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -81,6 +81,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB /* Sprog II (Andrew Crosland's SprogII DCC interface) */ #define FTDI_SPROG_II 0xF0C8 @@ -930,6 +933,7 @@ */ #define ADI_VID 0x0456 #define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 /* * JETI SPECTROMETER SPECBOS 1201 @@ -968,6 +972,12 @@ #define MARVELL_OPENRD_PID 0x9e90 /* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index d9398e9f30c..deba08c7a01 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -19,7 +19,7 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/uaccess.h> - +#include <linux/kfifo.h> static int debug; @@ -166,24 +166,6 @@ static void generic_cleanup(struct usb_serial_port *port) } } -int usb_serial_generic_resume(struct usb_serial *serial) -{ - struct usb_serial_port *port; - int i, c = 0, r; - - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - if (port->port.count && port->read_urb) { - r = usb_submit_urb(port->read_urb, GFP_NOIO); - if (r < 0) - c++; - } - } - - return c ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(usb_serial_generic_resume); - void usb_serial_generic_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); @@ -272,12 +254,81 @@ error_no_buffer: return bwrite; } +/** + * usb_serial_generic_write_start - kick off an URB write + * @port: Pointer to the &struct usb_serial_port data + * + * Returns the number of bytes queued on success. This will be zero if there + * was nothing to send. Otherwise, it returns a negative errno value + */ +static int usb_serial_generic_write_start(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + unsigned char *data; + int result; + int count; + unsigned long flags; + bool start_io; + + /* Atomically determine whether we can and need to start a USB + * operation. */ + spin_lock_irqsave(&port->lock, flags); + if (port->write_urb_busy) + start_io = false; + else { + start_io = (__kfifo_len(port->write_fifo) != 0); + port->write_urb_busy = start_io; + } + spin_unlock_irqrestore(&port->lock, flags); + + if (!start_io) + return 0; + + data = port->write_urb->transfer_buffer; + count = kfifo_get(port->write_fifo, data, port->bulk_out_size); + usb_serial_debug_data(debug, &port->dev, __func__, count, data); + + /* set up our urb */ + usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, count, + ((serial->type->write_bulk_callback) ? + serial->type->write_bulk_callback : + usb_serial_generic_write_bulk_callback), + port); + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); + /* don't have to grab the lock here, as we will + retry if != 0 */ + port->write_urb_busy = 0; + } else + result = count; + + return result; +} + +/** + * usb_serial_generic_write - generic write function for serial USB devices + * @tty: Pointer to &struct tty_struct for the device + * @port: Pointer to the &usb_serial_port structure for the device + * @buf: Pointer to the data to write + * @count: Number of bytes to write + * + * Returns the number of characters actually written, which may be anything + * from zero to @count. If an error occurs, it returns the negative errno + * value. + */ int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; int result; - unsigned char *data; dbg("%s - port %d", __func__, port->number); @@ -287,57 +338,20 @@ int usb_serial_generic_write(struct tty_struct *tty, } /* only do something if we have a bulk out endpoint */ - if (serial->num_bulk_out) { - unsigned long flags; - - if (serial->type->max_in_flight_urbs) - return usb_serial_multi_urb_write(tty, port, - buf, count); - - spin_lock_irqsave(&port->lock, flags); - if (port->write_urb_busy) { - spin_unlock_irqrestore(&port->lock, flags); - dbg("%s - already writing", __func__); - return 0; - } - port->write_urb_busy = 1; - spin_unlock_irqrestore(&port->lock, flags); - - count = (count > port->bulk_out_size) ? - port->bulk_out_size : count; - - memcpy(port->write_urb->transfer_buffer, buf, count); - data = port->write_urb->transfer_buffer; - usb_serial_debug_data(debug, &port->dev, __func__, count, data); + if (!serial->num_bulk_out) + return 0; - /* set up our urb */ - usb_fill_bulk_urb(port->write_urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, count, - ((serial->type->write_bulk_callback) ? - serial->type->write_bulk_callback : - usb_serial_generic_write_bulk_callback), - port); + if (serial->type->max_in_flight_urbs) + return usb_serial_multi_urb_write(tty, port, + buf, count); - /* send the data out the bulk port */ - port->write_urb_busy = 1; - result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - if (result) { - dev_err(&port->dev, - "%s - failed submitting write urb, error %d\n", - __func__, result); - /* don't have to grab the lock here, as we will - retry if != 0 */ - port->write_urb_busy = 0; - } else - result = count; + count = kfifo_put(port->write_fifo, buf, count); + result = usb_serial_generic_write_start(port); - return result; - } + if (result >= 0) + result = count; - /* no bulk out, so return 0 bytes written */ - return 0; + return result; } EXPORT_SYMBOL_GPL(usb_serial_generic_write); @@ -355,9 +369,8 @@ int usb_serial_generic_write_room(struct tty_struct *tty) room = port->bulk_out_size * (serial->type->max_in_flight_urbs - port->urbs_in_flight); - } else if (serial->num_bulk_out && !(port->write_urb_busy)) { - room = port->bulk_out_size; - } + } else if (serial->num_bulk_out) + room = port->write_fifo->size - __kfifo_len(port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); @@ -377,11 +390,8 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); chars = port->tx_bytes_flight; spin_unlock_irqrestore(&port->lock, flags); - } else if (serial->num_bulk_out) { - /* FIXME: Locking */ - if (port->write_urb_busy) - chars = port->write_urb->transfer_buffer_length; - } + } else if (serial->num_bulk_out) + chars = kfifo_len(port->write_fifo); dbg("%s - returns %d", __func__, chars); return chars; @@ -485,16 +495,23 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) if (port->urbs_in_flight < 0) port->urbs_in_flight = 0; spin_unlock_irqrestore(&port->lock, flags); + + if (status) { + dbg("%s - nonzero multi-urb write bulk status " + "received: %d", __func__, status); + return; + } } else { - /* Handle the case for single urb mode */ port->write_urb_busy = 0; - } - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - return; + if (status) { + dbg("%s - nonzero multi-urb write bulk status " + "received: %d", __func__, status); + kfifo_reset(port->write_fifo); + } else + usb_serial_generic_write_start(port); } + usb_serial_port_softint(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); @@ -559,6 +576,33 @@ int usb_serial_handle_break(struct usb_serial_port *port) } EXPORT_SYMBOL_GPL(usb_serial_handle_break); +int usb_serial_generic_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int i, c = 0, r; + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!port->port.count) + continue; + + if (port->read_urb) { + r = usb_submit_urb(port->read_urb, GFP_NOIO); + if (r < 0) + c++; + } + + if (port->write_urb) { + r = usb_serial_generic_write_start(port); + if (r < 0) + c++; + } + } + + return c ? -EIO : 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_resume); + void usb_serial_generic_disconnect(struct usb_serial *serial) { int i; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc0f832657e..b97960ac92f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 6138c1cda35..e6e02b178d2 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.10" +#define DRIVER_VERSION "v0.11" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { @@ -64,6 +64,7 @@ static int cdmode = 1; static int iuu_cardin; static int iuu_cardout; static int xmas; +static int vcc_default = 5; static void read_rxcmd_callback(struct urb *urb); @@ -79,6 +80,7 @@ struct iuu_private { u8 *buf; /* used for initialize speed */ u8 *dbgbuf; /* debug buffer */ u8 len; + int vcc; /* vcc (either 3 or 5 V) */ }; @@ -114,6 +116,7 @@ static int iuu_startup(struct usb_serial *serial) kfree(priv); return -ENOMEM; } + priv->vcc = vcc_default; spin_lock_init(&priv->lock); init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(serial->port[0], priv); @@ -1009,11 +1012,7 @@ static void iuu_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - msleep(1000); - /* wait one second to free all buffers */ iuu_led(port, 0, 0, 0xF000, 0xFF); - msleep(1000); - usb_reset_device(port->serial->dev); } } @@ -1182,6 +1181,95 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } +/* how to change VCC */ +static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) +{ + int status; + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + dbg("%s - enter", __func__); + + buf[0] = IUU_SET_VCC; + buf[1] = vcc & 0xFF; + buf[2] = (vcc >> 8) & 0xFF; + buf[3] = (vcc >> 16) & 0xFF; + buf[4] = (vcc >> 24) & 0xFF; + + status = bulk_immediate(port, buf, 5); + kfree(buf); + + if (status != IUU_OPERATION_OK) + dbg("%s - vcc error status = %2x", __func__, status); + else + dbg("%s - vcc OK !", __func__); + + return status; +} + +/* + * Sysfs Attributes + */ + +static ssize_t show_vcc_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + + return sprintf(buf, "%d\n", priv->vcc); +} + +static ssize_t store_vcc_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long v; + + if (strict_strtoul(buf, 10, &v)) { + dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n", + __func__, buf); + goto fail_store_vcc_mode; + } + + dbg("%s: setting vcc_mode = %ld", __func__, v); + + if ((v != 3) && (v != 5)) { + dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); + } else { + iuu_vcc_set(port, v); + priv->vcc = v; + } +fail_store_vcc_mode: + return count; +} + +static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode, + store_vcc_mode); + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port) +{ + dbg("%s", __func__); + + return device_create_file(&port->dev, &dev_attr_vcc_mode); +} + +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port) +{ + dbg("%s", __func__); + + device_remove_file(&port->dev, &dev_attr_vcc_mode); + return 0; +} + +/* + * End Sysfs Attributes + */ + static struct usb_serial_driver iuu_device = { .driver = { .owner = THIS_MODULE, @@ -1189,6 +1277,8 @@ static struct usb_serial_driver iuu_device = { }, .id_table = id_table, .num_ports = 1, + .port_probe = iuu_create_sysfs_attrs, + .port_remove = iuu_remove_sysfs_attrs, .open = iuu_open, .close = iuu_close, .write = iuu_uart_write, @@ -1238,14 +1328,19 @@ module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(xmas, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(xmas, "xmas color enabled or not"); +MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); module_param(boost, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(boost, "overclock boost percent 100 to 500"); +MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)"); module_param(clockmode, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(clockmode, "1=3Mhz579,2=3Mhz680,3=6Mhz"); +MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, " + "3=6 Mhz)"); module_param(cdmode, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(cdmode, "Card detect mode 0=none, 1=CD, 2=!CD, 3=DSR, " - "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING"); +MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, " + "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)"); + +module_param(vcc_default, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 " + "for 5V). Default to 5."); diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a61673133d7..f7373371b13 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index b66b71ccd12..99bd00f5188 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * * {sigh} - * Mororola should be using the CDC ACM USB spec, but instead + * Motorola should be using the CDC ACM USB spec, but instead * they try to just "do their own thing"... This driver should handle a * few phones in which a basic "dumb serial connection" is needed to be * able to get a connection through to them. diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index fe47051dbef..f66e3988321 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -291,6 +291,7 @@ static int option_resume(struct usb_serial *serial); #define TELIT_VENDOR_ID 0x1bc7 #define TELIT_PRODUCT_UC864E 0x1003 +#define TELIT_PRODUCT_UC864G 0x1004 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -299,6 +300,7 @@ static int option_resume(struct usb_serial *serial); #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe #define ZTE_PRODUCT_AC8710 0xfff1 +#define ZTE_PRODUCT_AC2726 0xfff5 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -502,6 +504,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, @@ -571,6 +574,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, @@ -592,6 +596,7 @@ static struct usb_driver option_driver = { #ifdef CONFIG_PM .suspend = usb_serial_suspend, .resume = usb_serial_resume, + .supports_autosuspend = 1, #endif .id_table = option_ids, .no_dynamic_id = 1, @@ -639,6 +644,12 @@ static int debug; #define IN_BUFLEN 4096 #define OUT_BUFLEN 4096 +struct option_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; +}; + struct option_port_private { /* Input endpoints and buffer for this port */ struct urb *in_urbs[N_IN_URB]; @@ -647,6 +658,8 @@ struct option_port_private { struct urb *out_urbs[N_OUT_URB]; u8 *out_buffer[N_OUT_URB]; unsigned long out_busy; /* Bit vector of URBs in use */ + int opened; + struct usb_anchor delayed; /* Settings for the port */ int rts_state; /* Handshaking pins (outputs) */ @@ -693,12 +706,17 @@ module_exit(option_exit); static int option_probe(struct usb_serial *serial, const struct usb_device_id *id) { + struct option_intf_private *data; /* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */ if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID && serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 && serial->interface->cur_altsetting->desc.bInterfaceClass == 0x8) return -ENODEV; + data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + spin_lock_init(&data->susp_lock); return 0; } @@ -755,12 +773,15 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct option_port_private *portdata; + struct option_intf_private *intfdata; int i; int left, todo; struct urb *this_urb = NULL; /* spurious */ int err; + unsigned long flags; portdata = usb_get_serial_port_data(port); + intfdata = port->serial->private; dbg("%s: write (%d chars)", __func__, count); @@ -782,17 +803,33 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s: endpoint %d buf %d", __func__, usb_pipeendpoint(this_urb->pipe), i); + err = usb_autopm_get_interface_async(port->serial->interface); + if (err < 0) + break; + /* send the data */ memcpy(this_urb->transfer_buffer, buf, todo); this_urb->transfer_buffer_length = todo; - err = usb_submit_urb(this_urb, GFP_ATOMIC); - if (err) { - dbg("usb_submit_urb %p (write bulk) failed " - "(%d)", this_urb, err); - clear_bit(i, &portdata->out_busy); - continue; + spin_lock_irqsave(&intfdata->susp_lock, flags); + if (intfdata->suspended) { + usb_anchor_urb(this_urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed " + "(%d)", this_urb, err); + clear_bit(i, &portdata->out_busy); + spin_lock_irqsave(&intfdata->susp_lock, flags); + intfdata->in_flight--; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + continue; + } } + portdata->tx_start_time[i] = jiffies; buf += todo; left -= todo; @@ -836,7 +873,10 @@ static void option_indat_callback(struct urb *urb) if (err) printk(KERN_ERR "%s: resubmit read urb failed. " "(%d)", __func__, err); + else + usb_mark_last_busy(port->serial->dev); } + } return; } @@ -845,15 +885,21 @@ static void option_outdat_callback(struct urb *urb) { struct usb_serial_port *port; struct option_port_private *portdata; + struct option_intf_private *intfdata; int i; dbg("%s", __func__); port = urb->context; + intfdata = port->serial->private; usb_serial_port_softint(port); - + usb_autopm_put_interface_async(port->serial->interface); portdata = usb_get_serial_port_data(port); + spin_lock(&intfdata->susp_lock); + intfdata->in_flight--; + spin_unlock(&intfdata->susp_lock); + for (i = 0; i < N_OUT_URB; ++i) { if (portdata->out_urbs[i] == urb) { smp_mb__before_clear_bit(); @@ -963,10 +1009,13 @@ static int option_chars_in_buffer(struct tty_struct *tty) static int option_open(struct tty_struct *tty, struct usb_serial_port *port) { struct option_port_private *portdata; + struct option_intf_private *intfdata; + struct usb_serial *serial = port->serial; int i, err; struct urb *urb; portdata = usb_get_serial_port_data(port); + intfdata = serial->private; dbg("%s", __func__); @@ -985,6 +1034,12 @@ static int option_open(struct tty_struct *tty, struct usb_serial_port *port) option_send_setup(port); + serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); + usb_autopm_put_interface(serial->interface); + return 0; } @@ -1009,16 +1064,23 @@ static void option_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct option_port_private *portdata; + struct option_intf_private *intfdata = port->serial->private; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); if (serial->dev) { /* Stop reading/writing urbs */ + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); + usb_autopm_get_interface(serial->interface); + serial->interface->needs_remote_wakeup = 0; } } @@ -1123,6 +1185,7 @@ static int option_startup(struct usb_serial *serial) __func__, i); return 1; } + init_usb_anchor(&portdata->delayed); for (j = 0; j < N_IN_URB; j++) { buffer = (u8 *)__get_free_page(GFP_KERNEL); @@ -1225,18 +1288,52 @@ static void option_release(struct usb_serial *serial) #ifdef CONFIG_PM static int option_suspend(struct usb_serial *serial, pm_message_t message) { + struct option_intf_private *intfdata = serial->private; + int b; + dbg("%s entered", __func__); + + if (serial->dev->auto_pm) { + spin_lock_irq(&intfdata->susp_lock); + b = intfdata->in_flight; + spin_unlock_irq(&intfdata->susp_lock); + + if (b) + return -EBUSY; + } + + spin_lock_irq(&intfdata->susp_lock); + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); stop_read_write_urbs(serial); return 0; } +static void play_delayed(struct usb_serial_port *port) +{ + struct option_intf_private *data; + struct option_port_private *portdata; + struct urb *urb; + int err; + + portdata = usb_get_serial_port_data(port); + data = port->serial->private; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (!err) + data->in_flight++; + } +} + static int option_resume(struct usb_serial *serial) { - int err, i, j; + int i, j; struct usb_serial_port *port; - struct urb *urb; + struct option_intf_private *intfdata = serial->private; struct option_port_private *portdata; + struct urb *urb; + int err = 0; dbg("%s entered", __func__); /* get the interrupt URBs resubmitted unconditionally */ @@ -1251,7 +1348,7 @@ static int option_resume(struct usb_serial *serial) if (err < 0) { err("%s: Error %d for interrupt URB of port%d", __func__, err, i); - return err; + goto err_out; } } @@ -1259,27 +1356,32 @@ static int option_resume(struct usb_serial *serial) /* walk all ports */ port = serial->port[i]; portdata = usb_get_serial_port_data(port); - mutex_lock(&port->mutex); /* skip closed ports */ - if (!port->port.count) { - mutex_unlock(&port->mutex); + spin_lock_irq(&intfdata->susp_lock); + if (!portdata->opened) { + spin_unlock_irq(&intfdata->susp_lock); continue; } for (j = 0; j < N_IN_URB; j++) { urb = portdata->in_urbs[j]; - err = usb_submit_urb(urb, GFP_NOIO); + err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - mutex_unlock(&port->mutex); err("%s: Error %d for bulk URB %d", __func__, err, i); - return err; + spin_unlock_irq(&intfdata->susp_lock); + goto err_out; } } - mutex_unlock(&port->mutex); + play_delayed(port); + spin_unlock_irq(&intfdata->susp_lock); } - return 0; + spin_lock_irq(&intfdata->susp_lock); + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); +err_out: + return err; } #endif diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index a63ea99936f..1128e01525b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, + { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -527,6 +528,12 @@ static void pl2303_set_termios(struct tty_struct *tty, int baud; int i; u8 control; + const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + int baud_floor, baud_ceil; + int k; dbg("%s - port %d", __func__, port->number); @@ -572,9 +579,39 @@ static void pl2303_set_termios(struct tty_struct *tty, dbg("%s - data bits = %d", __func__, buf[6]); } + /* For reference buf[0]:buf[3] baud rate value */ + /* NOTE: Only the values defined in baud_sup are supported ! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) + */ baud = tty_get_baud_rate(tty); - dbg("%s - baud = %d", __func__, baud); + dbg("%s - baud requested = %d", __func__, baud); if (baud) { + /* Set baudrate to nearest supported value */ + for (k=0; k<ARRAY_SIZE(baud_sup); k++) { + if (baud_sup[k] / baud) { + baud_ceil = baud_sup[k]; + if (k==0) { + baud = baud_ceil; + } else { + baud_floor = baud_sup[k-1]; + if ((baud_ceil % baud) + > (baud % baud_floor)) + baud = baud_floor; + else + baud = baud_ceil; + } + break; + } + } + if (baud > 1228800) { + /* type_0, type_1 only support up to 1228800 baud */ + if (priv->type != HX) + baud = 1228800; + else if (baud > 6000000) + baud = 6000000; + } + dbg("%s - baud set = %d", __func__, baud); buf[0] = baud & 0xff; buf[1] = (baud >> 8) & 0xff; buf[2] = (baud >> 16) & 0xff; @@ -585,8 +622,16 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[4]=1 is 1.5 stop bits */ /* For reference buf[4]=2 is 2 stop bits */ if (cflag & CSTOPB) { - buf[4] = 2; - dbg("%s - stop bits = 2", __func__); + /* NOTE: Comply with "real" UARTs / RS232: + * use 1.5 instead of 2 stop bits with 5 data bits + */ + if ((cflag & CSIZE) == CS5) { + buf[4] = 1; + dbg("%s - stop bits = 1.5", __func__); + } else { + buf[4] = 2; + dbg("%s - stop bits = 2", __func__); + } } else { buf[4] = 0; dbg("%s - stop bits = 1", __func__); @@ -599,11 +644,21 @@ static void pl2303_set_termios(struct tty_struct *tty, /* For reference buf[5]=3 is mark parity */ /* For reference buf[5]=4 is space parity */ if (cflag & PARODD) { - buf[5] = 1; - dbg("%s - parity = odd", __func__); + if (cflag & CMSPAR) { + buf[5] = 3; + dbg("%s - parity = mark", __func__); + } else { + buf[5] = 1; + dbg("%s - parity = odd", __func__); + } } else { - buf[5] = 2; - dbg("%s - parity = even", __func__); + if (cflag & CMSPAR) { + buf[5] = 4; + dbg("%s - parity = space", __func__); + } else { + buf[5] = 2; + dbg("%s - parity = even", __func__); + } } } else { buf[5] = 0; @@ -647,7 +702,7 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_vendor_write(0x0, 0x0, serial); } - /* FIXME: Need to read back resulting baud rate */ + /* Save resulting baud rate */ if (baud) tty_encode_baud_rate(tty, baud, baud); diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index ee9505e1dd9..d640dc95156 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -130,3 +130,7 @@ /* Sony, USB data cable for CMD-Jxx mobile phones */ #define SONY_VENDOR_ID 0x054c #define SONY_QN3USB_PRODUCT_ID 0x0437 + +/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */ +#define SANWA_VENDOR_ID 0x11ad +#define SANWA_PRODUCT_ID 0x0001 diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 55391bbe123..8c075b2416b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -51,6 +51,12 @@ struct sierra_iface_info { const u8 *ifaceinfo; /* pointer to the array holding the numbers */ }; +struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; +}; + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; @@ -144,6 +150,7 @@ static int sierra_probe(struct usb_serial *serial, { int result = 0; struct usb_device *udev; + struct sierra_intf_private *data; u8 ifnum; udev = serial->dev; @@ -171,6 +178,11 @@ static int sierra_probe(struct usb_serial *serial, return -ENODEV; } + data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + spin_lock_init(&data->susp_lock); + return result; } @@ -261,13 +273,18 @@ static struct usb_driver sierra_driver = { .name = "sierra", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, .id_table = id_table, .no_dynamic_id = 1, + .supports_autosuspend = 1, }; struct sierra_port_private { spinlock_t lock; /* lock the structure */ int outstanding_urbs; /* number of out urbs in flight */ + struct usb_anchor active; + struct usb_anchor delayed; /* Input endpoints and buffers for this port */ struct urb *in_urbs[N_IN_URB]; @@ -279,6 +296,8 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; + + unsigned int opened:1; }; static int sierra_send_setup(struct usb_serial_port *port) @@ -390,21 +409,25 @@ static void sierra_outdat_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; int status = urb->status; - unsigned long flags; dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + intfdata = port->serial->private; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree(urb->transfer_buffer); - + usb_autopm_put_interface_async(port->serial->interface); if (status) dev_dbg(&port->dev, "%s - nonzero write bulk status " "received: %d\n", __func__, status); - spin_lock_irqsave(&portdata->lock, flags); + spin_lock(&portdata->lock); --portdata->outstanding_urbs; - spin_unlock_irqrestore(&portdata->lock, flags); + spin_unlock(&portdata->lock); + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); usb_serial_port_softint(port); } @@ -414,6 +437,7 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; struct usb_serial *serial = port->serial; unsigned long flags; unsigned char *buffer; @@ -426,9 +450,9 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; portdata = usb_get_serial_port_data(port); + intfdata = serial->private; dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); - spin_lock_irqsave(&portdata->lock, flags); dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, portdata->outstanding_urbs); @@ -442,6 +466,14 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, portdata->outstanding_urbs); spin_unlock_irqrestore(&portdata->lock, flags); + retval = usb_autopm_get_interface_async(serial->interface); + if (retval < 0) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); + goto error_simple; + } + buffer = kmalloc(writesize, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); @@ -468,14 +500,29 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, /* Handle the need to send a zero length packet */ urb->transfer_flags |= URB_ZERO_PACKET; + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + goto skip_power; + } else { + usb_anchor_urb(urb, &portdata->active); + } /* send it down the pipe */ retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, retval); goto error; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); } +skip_power: /* we are done with this urb, so let the host driver * really free it when it is finished with it */ usb_free_urb(urb); @@ -491,6 +538,8 @@ error_no_buffer: dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, portdata->outstanding_urbs); spin_unlock_irqrestore(&portdata->lock, flags); + usb_autopm_put_interface_async(serial->interface); +error_simple: return retval; } @@ -530,6 +579,7 @@ static void sierra_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { + usb_mark_last_busy(port->serial->dev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -591,6 +641,7 @@ static void sierra_instat_callback(struct urb *urb) /* Resubmit urb so we continue receiving IRQ data */ if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { + usb_mark_last_busy(serial->dev); urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err) @@ -711,6 +762,8 @@ static void sierra_close(struct usb_serial_port *port) int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = port->serial->private; + dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); @@ -723,6 +776,10 @@ static void sierra_close(struct usb_serial_port *port) if (!serial->disconnected) sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + /* Stop reading urbs */ sierra_stop_rx_urbs(port); @@ -731,6 +788,8 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } + usb_autopm_get_interface(serial->interface); + serial->interface->needs_remote_wakeup = 0; } } @@ -738,6 +797,7 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) { struct sierra_port_private *portdata; struct usb_serial *serial = port->serial; + struct sierra_intf_private *intfdata = serial->private; int i; int err; int endpoint; @@ -771,6 +831,12 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) } sierra_send_setup(port); + serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); + usb_autopm_put_interface(serial->interface); + return 0; } @@ -818,6 +884,8 @@ static int sierra_startup(struct usb_serial *serial) return -ENOMEM; } spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); /* Set the port private data pointer */ usb_set_serial_port_data(port, portdata); } @@ -844,6 +912,88 @@ static void sierra_release(struct usb_serial *serial) } } +#ifdef CONFIG_PM +static void stop_read_write_urbs(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + usb_kill_anchored_urbs(&portdata->active); + } +} + +static int sierra_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct sierra_intf_private *intfdata; + int b; + + if (serial->dev->auto_pm) { + intfdata = serial->private; + spin_lock_irq(&intfdata->susp_lock); + b = intfdata->in_flight; + + if (b) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; + } else { + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); + } + } + stop_read_write_urbs(serial); + + return 0; +} + +static int sierra_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct sierra_intf_private *intfdata = serial->private; + struct sierra_port_private *portdata; + struct urb *urb; + int ec = 0; + int i, err; + + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + intfdata->in_flight--; + usb_unanchor_urb(urb); + usb_scuttle_anchored_urbs(&portdata->delayed); + break; + } + } + + if (portdata->opened) { + err = sierra_submit_rx_urbs(port, GFP_ATOMIC); + if (err) + ec++; + } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); + + return ec ? -EIO : 0; +} +#else +#define sierra_suspend NULL +#define sierra_resume NULL +#endif + static struct usb_serial_driver sierra_device = { .driver = { .owner = THIS_MODULE, @@ -864,6 +1014,8 @@ static struct usb_serial_driver sierra_device = { .tiocmset = sierra_tiocmset, .attach = sierra_startup, .release = sierra_release, + .suspend = sierra_suspend, + .resume = sierra_resume, .read_int_callback = sierra_instat_callback, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 61e7c40b94f..1e58220403d 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -544,7 +544,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, } /* Set Baud Rate */ - baud = tty_get_baud_rate(tty);; + baud = tty_get_baud_rate(tty); switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 9d7ca4868d3..ff75a3589e7 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -35,6 +35,7 @@ #include <linux/serial.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/kfifo.h> #include "pl2303.h" /* @@ -292,8 +293,6 @@ static int serial_open(struct tty_struct *tty, struct file *filp) static void serial_down(struct usb_serial_port *port) { struct usb_serial_driver *drv = port->serial->type; - struct usb_serial *serial; - struct module *owner; /* * The console is magical. Do not hang up the console hardware @@ -309,12 +308,8 @@ static void serial_down(struct usb_serial_port *port) return; mutex_lock(&port->mutex); - serial = port->serial; - owner = serial->type->driver.owner; - if (drv->close) drv->close(port); - mutex_unlock(&port->mutex); } @@ -631,6 +626,8 @@ static void port_release(struct device *dev) usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); + if (!IS_ERR(port->write_fifo) && port->write_fifo) + kfifo_free(port->write_fifo); kfree(port->bulk_in_buffer); kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); @@ -970,6 +967,10 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } + port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL, + &port->lock); + if (IS_ERR(port->write_fifo)) + goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; @@ -1163,15 +1164,19 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) serial->suspending = 1; + if (serial->type->suspend) { + r = serial->type->suspend(serial, message); + if (r < 0) + goto err_out; + } + for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) kill_traffic(port); } - if (serial->type->suspend) - r = serial->type->suspend(serial, message); - +err_out: return r; } EXPORT_SYMBOL(usb_serial_suspend); diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 2b6e565262c..ded836b02d7 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -334,7 +334,7 @@ static int datafab_determine_lun(struct us_data *us, unsigned char *buf; int count = 0, rc; - if (!us || !info) + if (!info) return USB_STOR_TRANSPORT_ERROR; memcpy(command, scommand, 8); @@ -399,7 +399,7 @@ static int datafab_id_device(struct us_data *us, unsigned char *reply; int rc; - if (!us || !info) + if (!info) return USB_STOR_TRANSPORT_ERROR; if (info->lun == -1) { diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index ec17c96371a..105d900150c 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -102,5 +102,5 @@ int usb_stor_huawei_e220_init(struct us_data *us) USB_TYPE_STANDARD | USB_RECIP_DEVICE, 0x01, 0x0, NULL, 0x0, 1000); US_DEBUGP("Huawei mode set result is %d\n", result); - return (result ? 0 : -ENODEV); + return 0; } diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index 1c69420e3ac..6168596c5ac 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -335,7 +335,7 @@ static int jumpshot_id_device(struct us_data *us, unsigned char *reply; int rc; - if (!us || !info) + if (!info) return USB_STOR_TRANSPORT_ERROR; command[0] = 0xE0; diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 380233bd6a3..80e65f29921 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -163,7 +163,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action) usb_kill_urb(onetouch->irq); break; case US_RESUME: - if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0) + if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0) dev_err(&onetouch->irq->dev->dev, "usb_submit_urb failed\n"); break; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7477d411959..079ae0f7bec 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -66,13 +66,6 @@ UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE), -/* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */ -UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0200, - "Mitsumi", - "USB FDD", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_SINGLE_LUN ), - /* Reported by Rodolfo Quesada <rquesada@roqz.net> */ UNUSUAL_DEV( 0x03ee, 0x6906, 0x0003, 0x0003, "VIA Technologies Inc.", @@ -233,13 +226,6 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), -/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ -UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, - "SMSC", - "FDC GOLD-2.30", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_SINGLE_LUN ), - #ifdef NO_SDDR09 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", @@ -664,19 +650,13 @@ UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), - +/* We keep this entry to force the transport; firmware 3.00 and later is ok. */ UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299, "Y-E Data", "Flashbuster-U", US_SC_DEVICE, US_PR_CB, NULL, US_FL_SINGLE_LUN), -UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999, - "Y-E Data", - "Flashbuster-U", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_SINGLE_LUN), - /* Reported by Johann Cardon <johann.cardon@free.fr> * This entry is needed only because the device reports * bInterfaceClass = 0xff (vendor-specific) diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 60ba631e99c..b62f2bc064f 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -18,7 +18,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/kref.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <linux/usb.h> #include <linux/mutex.h> @@ -28,7 +28,7 @@ #define USB_SKEL_PRODUCT_ID 0xfff0 /* table of devices that work with this driver */ -static struct usb_device_id skel_table [] = { +static struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -52,15 +52,21 @@ struct usb_skel { struct usb_interface *interface; /* the interface for this device */ struct semaphore limit_sem; /* limiting the number of writes in progress */ struct usb_anchor submitted; /* in case we need to retract our submissions */ + struct urb *bulk_in_urb; /* the urb to read data with */ unsigned char *bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ + size_t bulk_in_filled; /* number of bytes in the buffer */ + size_t bulk_in_copied; /* already copied to user space */ __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ int errors; /* the last request tanked */ int open_count; /* count the number of openers */ + bool ongoing_read; /* a read is going on */ + bool processed_urb; /* indicates we haven't processed the urb */ spinlock_t err_lock; /* lock for errors */ struct kref kref; struct mutex io_mutex; /* synchronize I/O with disconnect */ + struct completion bulk_in_completion; /* to wait for an ongoing read */ }; #define to_skel_dev(d) container_of(d, struct usb_skel, kref) @@ -71,6 +77,7 @@ static void skel_delete(struct kref *kref) { struct usb_skel *dev = to_skel_dev(kref); + usb_free_urb(dev->bulk_in_urb); usb_put_dev(dev->udev); kfree(dev->bulk_in_buffer); kfree(dev); @@ -87,7 +94,7 @@ static int skel_open(struct inode *inode, struct file *file) interface = usb_find_interface(&skel_driver, subminor); if (!interface) { - err ("%s - error, can't find device for minor %d", + err("%s - error, can't find device for minor %d", __func__, subminor); retval = -ENODEV; goto exit; @@ -174,38 +181,190 @@ static int skel_flush(struct file *file, fl_owner_t id) return res; } -static ssize_t skel_read(struct file *file, char *buffer, size_t count, loff_t *ppos) +static void skel_read_bulk_callback(struct urb *urb) { struct usb_skel *dev; - int retval; - int bytes_read; + + dev = urb->context; + + spin_lock(&dev->err_lock); + /* sync/async unlink faults aren't errors */ + if (urb->status) { + if (!(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN)) + err("%s - nonzero write bulk status received: %d", + __func__, urb->status); + + dev->errors = urb->status; + } else { + dev->bulk_in_filled = urb->actual_length; + } + dev->ongoing_read = 0; + spin_unlock(&dev->err_lock); + + complete(&dev->bulk_in_completion); +} + +static int skel_do_read_io(struct usb_skel *dev, size_t count) +{ + int rv; + + /* prepare a read */ + usb_fill_bulk_urb(dev->bulk_in_urb, + dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->bulk_in_endpointAddr), + dev->bulk_in_buffer, + min(dev->bulk_in_size, count), + skel_read_bulk_callback, + dev); + /* tell everybody to leave the URB alone */ + spin_lock_irq(&dev->err_lock); + dev->ongoing_read = 1; + spin_unlock_irq(&dev->err_lock); + + /* do it */ + rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL); + if (rv < 0) { + err("%s - failed submitting read urb, error %d", + __func__, rv); + dev->bulk_in_filled = 0; + rv = (rv == -ENOMEM) ? rv : -EIO; + spin_lock_irq(&dev->err_lock); + dev->ongoing_read = 0; + spin_unlock_irq(&dev->err_lock); + } + + return rv; +} + +static ssize_t skel_read(struct file *file, char *buffer, size_t count, + loff_t *ppos) +{ + struct usb_skel *dev; + int rv; + bool ongoing_io; dev = (struct usb_skel *)file->private_data; - mutex_lock(&dev->io_mutex); + /* if we cannot read at all, return EOF */ + if (!dev->bulk_in_urb || !count) + return 0; + + /* no concurrent readers */ + rv = mutex_lock_interruptible(&dev->io_mutex); + if (rv < 0) + return rv; + if (!dev->interface) { /* disconnect() was called */ - retval = -ENODEV; + rv = -ENODEV; goto exit; } - /* do a blocking bulk read to get data from the device */ - retval = usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), - dev->bulk_in_buffer, - min(dev->bulk_in_size, count), - &bytes_read, 10000); - - /* if the read was successful, copy the data to userspace */ - if (!retval) { - if (copy_to_user(buffer, dev->bulk_in_buffer, bytes_read)) - retval = -EFAULT; - else - retval = bytes_read; + /* if IO is under way, we must not touch things */ +retry: + spin_lock_irq(&dev->err_lock); + ongoing_io = dev->ongoing_read; + spin_unlock_irq(&dev->err_lock); + + if (ongoing_io) { + /* nonblocking IO shall not wait */ + if (file->f_flags & O_NONBLOCK) { + rv = -EAGAIN; + goto exit; + } + /* + * IO may take forever + * hence wait in an interruptible state + */ + rv = wait_for_completion_interruptible(&dev->bulk_in_completion); + if (rv < 0) + goto exit; + /* + * by waiting we also semiprocessed the urb + * we must finish now + */ + dev->bulk_in_copied = 0; + dev->processed_urb = 1; + } + + if (!dev->processed_urb) { + /* + * the URB hasn't been processed + * do it now + */ + wait_for_completion(&dev->bulk_in_completion); + dev->bulk_in_copied = 0; + dev->processed_urb = 1; + } + + /* errors must be reported */ + rv = dev->errors; + if (rv < 0) { + /* any error is reported once */ + dev->errors = 0; + /* to preserve notifications about reset */ + rv = (rv == -EPIPE) ? rv : -EIO; + /* no data to deliver */ + dev->bulk_in_filled = 0; + /* report it */ + goto exit; } + /* + * if the buffer is filled we may satisfy the read + * else we need to start IO + */ + + if (dev->bulk_in_filled) { + /* we had read data */ + size_t available = dev->bulk_in_filled - dev->bulk_in_copied; + size_t chunk = min(available, count); + + if (!available) { + /* + * all data has been used + * actual IO needs to be done + */ + rv = skel_do_read_io(dev, count); + if (rv < 0) + goto exit; + else + goto retry; + } + /* + * data is available + * chunk tells us how much shall be copied + */ + + if (copy_to_user(buffer, + dev->bulk_in_buffer + dev->bulk_in_copied, + chunk)) + rv = -EFAULT; + else + rv = chunk; + + dev->bulk_in_copied += chunk; + + /* + * if we are asked for more than we have, + * we start IO but don't wait + */ + if (available < count) + skel_do_read_io(dev, count - chunk); + } else { + /* no data in the buffer */ + rv = skel_do_read_io(dev, count); + if (rv < 0) + goto exit; + else if (!file->f_flags & O_NONBLOCK) + goto retry; + rv = -EAGAIN; + } exit: mutex_unlock(&dev->io_mutex); - return retval; + return rv; } static void skel_write_bulk_callback(struct urb *urb) @@ -216,7 +375,7 @@ static void skel_write_bulk_callback(struct urb *urb) /* sync/async unlink faults aren't errors */ if (urb->status) { - if(!(urb->status == -ENOENT || + if (!(urb->status == -ENOENT || urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) err("%s - nonzero write bulk status received: %d", @@ -233,7 +392,8 @@ static void skel_write_bulk_callback(struct urb *urb) up(&dev->limit_sem); } -static ssize_t skel_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos) +static ssize_t skel_write(struct file *file, const char *user_buffer, + size_t count, loff_t *ppos) { struct usb_skel *dev; int retval = 0; @@ -247,14 +407,25 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou if (count == 0) goto exit; - /* limit the number of URBs in flight to stop a user from using up all RAM */ - if (down_interruptible(&dev->limit_sem)) { - retval = -ERESTARTSYS; - goto exit; + /* + * limit the number of URBs in flight to stop a user from using up all + * RAM + */ + if (!file->f_flags & O_NONBLOCK) { + if (down_interruptible(&dev->limit_sem)) { + retval = -ERESTARTSYS; + goto exit; + } + } else { + if (down_trylock(&dev->limit_sem)) { + retval = -EAGAIN; + goto exit; + } } spin_lock_irq(&dev->err_lock); - if ((retval = dev->errors) < 0) { + retval = dev->errors; + if (retval < 0) { /* any error is reported once */ dev->errors = 0; /* to preserve notifications about reset */ @@ -271,7 +442,8 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto error; } - buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, &urb->transfer_dma); + buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, + &urb->transfer_dma); if (!buf) { retval = -ENOMEM; goto error; @@ -301,11 +473,15 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou retval = usb_submit_urb(urb, GFP_KERNEL); mutex_unlock(&dev->io_mutex); if (retval) { - err("%s - failed submitting write urb, error %d", __func__, retval); + err("%s - failed submitting write urb, error %d", __func__, + retval); goto error_unanchor; } - /* release our reference to this urb, the USB core will eventually free it entirely */ + /* + * release our reference to this urb, the USB core will eventually free + * it entirely + */ usb_free_urb(urb); @@ -343,7 +519,8 @@ static struct usb_class_driver skel_class = { .minor_base = USB_SKEL_MINOR_BASE, }; -static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id) +static int skel_probe(struct usb_interface *interface, + const struct usb_device_id *id) { struct usb_skel *dev; struct usb_host_interface *iface_desc; @@ -363,6 +540,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i mutex_init(&dev->io_mutex); spin_lock_init(&dev->err_lock); init_usb_anchor(&dev->submitted); + init_completion(&dev->bulk_in_completion); dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; @@ -384,6 +562,11 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i err("Could not allocate bulk_in_buffer"); goto error; } + dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->bulk_in_urb) { + err("Could not allocate bulk_in_urb"); + goto error; + } } if (!dev->bulk_out_endpointAddr && @@ -453,6 +636,7 @@ static void skel_draw_down(struct usb_skel *dev) time = usb_wait_anchor_empty_timeout(&dev->submitted, 1000); if (!time) usb_kill_anchored_urbs(&dev->submitted); + usb_kill_urb(dev->bulk_in_urb); } static int skel_suspend(struct usb_interface *intf, pm_message_t message) @@ -465,7 +649,7 @@ static int skel_suspend(struct usb_interface *intf, pm_message_t message) return 0; } -static int skel_resume (struct usb_interface *intf) +static int skel_resume(struct usb_interface *intf) { return 0; } diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index 586d350cdb4..d6bea3e0b54 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -47,7 +47,7 @@ * to an endpoint on a WUSB device that is connected to a * HWA RC. * - * xfer Transfer managment -- this is all the code that gets a + * xfer Transfer management -- this is all the code that gets a * buffer and pushes it to a device (or viceversa). * * * Some day a lot of this code will be shared between this driver and |