aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/ehci-hcd.c67
-rw-r--r--drivers/usb/host/ehci-mem.c3
-rw-r--r--drivers/usb/host/ehci-q.c4
-rw-r--r--drivers/usb/host/ehci-sched.c127
-rw-r--r--drivers/usb/host/ehci.h14
5 files changed, 0 insertions, 215 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c4e15ed1405..35cdba10411 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -275,58 +275,6 @@ static void ehci_work(struct ehci_hcd *ehci);
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_CPU_FREQ
-
-#include <linux/cpufreq.h>
-
-static void ehci_cpufreq_pause (struct ehci_hcd *ehci)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ehci->lock, flags);
- if (!ehci->cpufreq_changing++)
- qh_inactivate_split_intr_qhs(ehci);
- spin_unlock_irqrestore(&ehci->lock, flags);
-}
-
-static void ehci_cpufreq_unpause (struct ehci_hcd *ehci)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ehci->lock, flags);
- if (!--ehci->cpufreq_changing)
- qh_reactivate_split_intr_qhs(ehci);
- spin_unlock_irqrestore(&ehci->lock, flags);
-}
-
-/*
- * ehci_cpufreq_notifier is needed to avoid MMF errors that occur when
- * EHCI controllers that don't cache many uframes get delayed trying to
- * read main memory during CPU frequency transitions. This can cause
- * split interrupt transactions to not be completed in the required uframe.
- * This has been observed on the Broadcom/ServerWorks HT1000 controller.
- */
-static int ehci_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- struct ehci_hcd *ehci = container_of(nb, struct ehci_hcd,
- cpufreq_transition);
-
- switch (val) {
- case CPUFREQ_PRECHANGE:
- ehci_cpufreq_pause(ehci);
- break;
- case CPUFREQ_POSTCHANGE:
- ehci_cpufreq_unpause(ehci);
- break;
- }
- return 0;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
static void ehci_watchdog (unsigned long param)
{
struct ehci_hcd *ehci = (struct ehci_hcd *) param;
@@ -460,10 +408,6 @@ static void ehci_stop (struct usb_hcd *hcd)
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
spin_unlock_irq(&ehci->lock);
-#ifdef CONFIG_CPU_FREQ
- cpufreq_unregister_notifier(&ehci->cpufreq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-#endif
/* let companion controllers work when we aren't */
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
@@ -569,17 +513,6 @@ static int ehci_init(struct usb_hcd *hcd)
}
ehci->command = temp;
-#ifdef CONFIG_CPU_FREQ
- INIT_LIST_HEAD(&ehci->split_intr_qhs);
- /*
- * If the EHCI controller caches enough uframes, this probably
- * isn't needed unless there are so many low/full speed devices
- * that the controller's can't cache it all.
- */
- ehci->cpufreq_transition.notifier_call = ehci_cpufreq_notifier;
- cpufreq_register_notifier(&ehci->cpufreq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-#endif
return 0;
}
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 8816d09903d..0431397836f 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -94,9 +94,6 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags)
qh->qh_dma = dma;
// INIT_LIST_HEAD (&qh->qh_list);
INIT_LIST_HEAD (&qh->qtd_list);
-#ifdef CONFIG_CPU_FREQ
- INIT_LIST_HEAD (&qh->split_intr_qhs);
-#endif
/* dummy td enables safe urb queuing */
qh->dummy = ehci_qtd_alloc (ehci, flags);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 2284028f8aa..140bfa423e0 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -312,10 +312,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
struct urb *urb;
u32 token = 0;
- /* ignore QHs that are currently inactive */
- if (qh->hw_info1 & __constant_cpu_to_le32(QH_INACTIVATE))
- break;
-
qtd = list_entry (entry, struct ehci_qtd, qtd_list);
urb = qtd->urb;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index d4a8ace4967..e682f2342ef 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -479,109 +479,6 @@ static int disable_periodic (struct ehci_hcd *ehci)
}
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_CPU_FREQ
-
-static int safe_to_modify_i (struct ehci_hcd *ehci, struct ehci_qh *qh)
-{
- int now; /* current (frame * 8) + uframe */
- int prev_start, next_start; /* uframes from/to split start */
- int start_uframe = ffs(le32_to_cpup (&qh->hw_info2) & QH_SMASK);
- int end_uframe = fls((le32_to_cpup (&qh->hw_info2) & QH_CMASK) >> 8);
- int split_duration = end_uframe - start_uframe;
-
- now = readl(&ehci->regs->frame_index) % (ehci->periodic_size << 3);
-
- next_start = ((1024 << 3) + (qh->start << 3) + start_uframe - now)
- % (qh->period << 3);
- prev_start = (qh->period << 3) - next_start;
-
- /*
- * Make sure there will be at least one uframe when qh is safe.
- */
- if ((qh->period << 3) <= (ehci->i_thresh + 2 + split_duration))
- /* never safe */
- return -EINVAL;
-
- /*
- * Wait 1 uframe after transaction should have started, to make
- * sure controller has time to write back overlay, so we can
- * check QTD_STS_STS to see if transaction is in progress.
- */
- if ((next_start > ehci->i_thresh) && (prev_start > 1))
- /* safe to set "i" bit if split isn't in progress */
- return (qh->hw_token & STATUS_BIT(ehci)) ? 0 : 1;
- else
- return 0;
-}
-
-/* Set inactivate bit for all the split interrupt QHs. */
-static void qh_inactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
- struct ehci_qh *qh;
- int not_done, safe;
- u32 inactivate = INACTIVATE_BIT(ehci);
- u32 active = ACTIVE_BIT(ehci);
-
- do {
- not_done = 0;
- list_for_each_entry(qh, &ehci->split_intr_qhs,
- split_intr_qhs) {
- if (qh->hw_info1 & inactivate)
- /* already off */
- continue;
- /*
- * To avoid setting "I" after the start split happens,
- * don't set it if the QH might be cached in the
- * controller. Some HCs (Broadcom/ServerWorks HT1000)
- * will stop in the middle of a split transaction when
- * the "I" bit is set.
- */
- safe = safe_to_modify_i(ehci, qh);
- if (safe == 0) {
- not_done = 1;
- } else if (safe > 0) {
- qh->was_active = qh->hw_token & active;
- qh->hw_info1 |= inactivate;
- }
- }
- } while (not_done);
- wmb();
-}
-
-static void qh_reactivate_split_intr_qhs (struct ehci_hcd *ehci)
-{
- struct ehci_qh *qh;
- u32 token;
- int not_done, safe;
- u32 inactivate = INACTIVATE_BIT(ehci);
- u32 active = ACTIVE_BIT(ehci);
- u32 halt = HALT_BIT(ehci);
-
- do {
- not_done = 0;
- list_for_each_entry(qh, &ehci->split_intr_qhs, split_intr_qhs) {
- if (!(qh->hw_info1 & inactivate)) /* already on */
- continue;
- /*
- * Don't reactivate if cached, or controller might
- * overwrite overlay after we modify it!
- */
- safe = safe_to_modify_i(ehci, qh);
- if (safe == 0) {
- not_done = 1;
- } else if (safe > 0) {
- /* See EHCI 1.0 section 4.15.2.4. */
- token = qh->hw_token;
- qh->hw_token = (token | halt) & ~active;
- wmb();
- qh->hw_info1 &= ~inactivate;
- wmb();
- qh->hw_token = (token & ~halt) | qh->was_active;
- }
- }
- } while (not_done);
-}
-#endif
/* periodic schedule slots have iso tds (normal or split) first, then a
* sparse tree for active interrupt transfers.
@@ -599,17 +496,6 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
period, hc32_to_cpup(ehci, &qh->hw_info2) & (QH_CMASK | QH_SMASK),
qh, qh->start, qh->usecs, qh->c_usecs);
-#ifdef CONFIG_CPU_FREQ
- /*
- * If low/full speed interrupt QHs are inactive (because of
- * cpufreq changing processor speeds), start QH with I flag set--
- * it will automatically be cleared when cpufreq is done.
- */
- if (ehci->cpufreq_changing)
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13))))
- qh->hw_info1 |= INACTIVATE_BIT(ehci);
-#endif
-
/* high bandwidth, or otherwise every microframe */
if (period == 0)
period = 1;
@@ -658,12 +544,6 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
? ((qh->usecs + qh->c_usecs) / qh->period)
: (qh->usecs * 8);
-#ifdef CONFIG_CPU_FREQ
- /* add qh to list of low/full speed interrupt QHs, if applicable */
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
- list_add(&qh->split_intr_qhs, &ehci->split_intr_qhs);
- }
-#endif
/* maybe enable periodic schedule processing */
if (!ehci->periodic_sched++)
return enable_periodic (ehci);
@@ -683,13 +563,6 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
// THEN
// qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */);
-#ifdef CONFIG_CPU_FREQ
- /* remove qh from list of low/full speed interrupt QHs */
- if (!(qh->hw_info1 & (cpu_to_le32(1 << 13)))) {
- list_del_init(&qh->split_intr_qhs);
- }
-#endif
-
/* high bandwidth, or otherwise part of every microframe */
if ((period = qh->period) == 0)
period = 1;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2c68a04230c..951d69fec51 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -71,12 +71,6 @@ struct ehci_hcd { /* one per controller */
__u32 hcs_params; /* cached register copy */
spinlock_t lock;
-#ifdef CONFIG_CPU_FREQ
- struct notifier_block cpufreq_transition;
- int cpufreq_changing;
- struct list_head split_intr_qhs;
-#endif
-
/* async schedule support */
struct ehci_qh *async;
struct ehci_qh *reclaim;
@@ -439,10 +433,6 @@ struct ehci_qh {
__hc32 hw_next; /* see EHCI 3.6.1 */
__hc32 hw_info1; /* see EHCI 3.6.2 */
#define QH_HEAD 0x00008000
-#define QH_INACTIVATE 0x00000080
-
-#define INACTIVATE_BIT(ehci) cpu_to_hc32(ehci, QH_INACTIVATE)
-
__hc32 hw_info2; /* see EHCI 3.6.2 */
#define QH_SMASK 0x000000ff
#define QH_CMASK 0x0000ff00
@@ -492,10 +482,6 @@ struct ehci_qh {
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
struct usb_device *dev; /* access to TT */
-#ifdef CONFIG_CPU_FREQ
- struct list_head split_intr_qhs; /* list of split qhs */
- __le32 was_active; /* active bit before "i" set */
-#endif
} __attribute__ ((aligned (32)));
/*-------------------------------------------------------------------------*/
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-13 13:55:39 +0000