diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 114 |
1 files changed, 63 insertions, 51 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8874cf2fd27..b1cb72c3780 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -4,20 +4,7 @@ menu "Graphics support" -config FIRMWARE_EDID - bool "Enable firmware EDID" - default y - ---help--- - This enables access to the EDID transferred from the firmware. - On the i386, this is from the Video BIOS. Enable this if DDC/I2C - transfers do not work for your driver and if you are using - nvidiafb, i810fb or savagefb. - - In general, choosing Y for this option is safe. If you - experience extremely long delays while booting before you get - something on your display, try setting this to N. Matrox cards in - combination with certain motherboards and monitors are known to - suffer from this problem. +source "drivers/video/backlight/Kconfig" config FB tristate "Support for frame buffer devices" @@ -53,9 +40,27 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FIRMWARE_EDID + bool "Enable firmware EDID" + depends on FB + default n + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + config FB_DDC tristate - depends on FB && I2C && I2C_ALGOBIT + depends on FB + select I2C_ALGOBIT + select I2C default n config FB_CFB_FILLRECT @@ -134,6 +139,9 @@ config FB_TILEBLITTING This is particularly important to one driver, matroxfb. If unsure, say N. +comment "Frame buffer hardware drivers" + depends on FB + config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) @@ -388,7 +396,7 @@ config FB_ATARI config FB_OF bool "Open Firmware frame buffer device support" - depends on (FB = y) && (PPC64 || PPC_OF) + depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -669,8 +677,7 @@ config FB_S1D13XXX config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI - select I2C_ALGOBIT if FB_NVIDIA_I2C - select I2C if FB_NVIDIA_I2C + select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -688,6 +695,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" depends on FB_NVIDIA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -699,8 +707,7 @@ config FB_NVIDIA_I2C config FB_NVIDIA_BACKLIGHT bool "Support for backlight control" - depends on FB_NVIDIA && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_NVIDIA default y help Say Y here if you want to control the backlight of your display. @@ -708,9 +715,7 @@ config FB_NVIDIA_BACKLIGHT config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI - select I2C_ALGOBIT if FB_RIVA_I2C - select I2C if FB_RIVA_I2C - select FB_DDC if FB_RIVA_I2C + select FB_BACKLIGHT if FB_RIVA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -727,6 +732,7 @@ config FB_RIVA config FB_RIVA_I2C bool "Enable DDC Support" depends on FB_RIVA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -747,8 +753,7 @@ config FB_RIVA_DEBUG config FB_RIVA_BACKLIGHT bool "Support for backlight control" - depends on FB_RIVA && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_RIVA default y help Say Y here if you want to control the backlight of your display. @@ -798,8 +803,6 @@ config FB_I810_GTF config FB_I810_I2C bool "Enable DDC Support" depends on FB_I810 && FB_I810_GTF - select I2C - select I2C_ALGOBIT select FB_DDC help @@ -808,8 +811,6 @@ config FB_INTEL depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL - select I2C_ALGOBIT if FB_INTEL_I2C - select I2C if FB_INTEL_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -842,6 +843,7 @@ config FB_INTEL_DEBUG config FB_INTEL_I2C bool "DDC/I2C for Intel framebuffer support" depends on FB_INTEL + select FB_DDC default y help Say Y here if you want DDC/I2C support for your on-board Intel graphics. @@ -920,8 +922,8 @@ config FB_MATROX_G config FB_MATROX_I2C tristate "Matrox I2C support" - depends on FB_MATROX && I2C - select I2C_ALGOBIT + depends on FB_MATROX + select FB_DDC ---help--- This drivers creates I2C buses which are needed for accessing the DDC (I2C) bus present on all Matroxes, an I2C bus which @@ -989,9 +991,7 @@ config FB_MATROX_MULTIHEAD config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI - select I2C_ALGOBIT if FB_RADEON_I2C - select I2C if FB_RADEON_I2C - select FB_DDC if FB_RADEON_I2C + select FB_BACKLIGHT if FB_RADEON_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1015,14 +1015,14 @@ config FB_RADEON config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON + select FB_DDC default y help Say Y here if you want DDC/I2C support for your Radeon board. config FB_RADEON_BACKLIGHT bool "Support for backlight control" - depends on FB_RADEON && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_RADEON default y help Say Y here if you want to control the backlight of your display. @@ -1042,6 +1042,7 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -1053,8 +1054,7 @@ config FB_ATY128 config FB_ATY128_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY128 && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_ATY128 default y help Say Y here if you want to control the backlight of your display. @@ -1065,6 +1065,7 @@ config FB_ATY select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1103,8 +1104,7 @@ config FB_ATY_GX config FB_ATY_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_ATY default y help Say Y here if you want to control the backlight of your display. @@ -1123,9 +1123,6 @@ config FB_S3 config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL - select I2C_ALGOBIT if FB_SAVAGE_I2C - select I2C if FB_SAVAGE_I2C - select FB_DDC if FB_SAVAGE_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1142,6 +1139,7 @@ config FB_SAVAGE config FB_SAVAGE_I2C bool "Enable DDC2 Support" depends on FB_SAVAGE + select FB_DDC help This enables I2C support for S3 Savage Chipsets. This is used only for getting EDID information from the attached display @@ -1322,7 +1320,7 @@ config FB_AU1100 config FB_AU1200 bool "Au1200 LCD Driver" - depends on FB && MIPS && SOC_AU1200 + depends on (FB = y) && MIPS && SOC_AU1200 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1472,7 +1470,7 @@ config FB_G364 config FB_68328 bool "Motorola 68328 native frame buffer support" - depends on FB && (M68328 || M68EZ328 || M68VZ328) + depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1573,6 +1571,24 @@ config FB_S3C2410_DEBUG Turn on debugging messages. Note that you can set/unset at run time through sysfs +config FB_SM501 + tristate "Silicon Motion SM501 framebuffer support" + depends on FB && MFD_SM501 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the CRT and LCD controllers in the Silicon + Motion SM501. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called sm501fb. If you want to compile it as a module, + say M here and read <file:Documentation/modules.txt>. + + If unsure, say N. + + config FB_PNX4008_DUM tristate "Display Update Module support on Philips PNX4008 board" depends on FB && ARCH_PNX4008 @@ -1600,8 +1616,7 @@ config FB_IBM_GXT4500 config FB_PS3 bool "PS3 GPU framebuffer driver" - depends on FB && PPC_PS3 - select PS3_PS3AV + depends on (FB = y) && PS3_PS3AV select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1639,6 +1654,7 @@ config FB_VIRTUAL the vfb_enable=1 option. If unsure, say N. + if VT source "drivers/video/console/Kconfig" endif @@ -1647,9 +1663,5 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if SYSFS - source "drivers/video/backlight/Kconfig" -endif - endmenu |