diff options
Diffstat (limited to 'drivers/video')
75 files changed, 20723 insertions, 97 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6b89eb55ed3..99c0df1c7eb 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2066,6 +2066,7 @@ config XEN_FBDEV_FRONTEND select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select XEN_XENBUS_FRONTEND default y help This driver implements the front-end of the Xen virtual @@ -2130,7 +2131,7 @@ config FB_PRE_INIT_FB the bootloader. config FB_MSM - tristate + tristate "MSM Framebuffer support" depends on FB && ARCH_MSM select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -2164,6 +2165,7 @@ config FB_BROADSHEET a bridge adapter. source "drivers/video/omap/Kconfig" +source "drivers/video/omap2/Kconfig" source "drivers/video/backlight/Kconfig" source "drivers/video/display/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 80232e12488..0f8da331ba0 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -124,6 +124,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o obj-$(CONFIG_FB_OMAP) += omap/ +obj-y += omap2/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o obj-$(CONFIG_FB_MB862XX) += mb862xx/ diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index d5e801076d3..3d886c6902f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -964,7 +964,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(1); - dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n", + dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n", info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base); return 0; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 913b4a47ae5..1ddeb4c3476 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3276,7 +3276,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "24 bit interface"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } else { switch (format & 7) { @@ -3299,7 +3299,7 @@ static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base) txtformat = "262144 colours (FDPI-2 mode)"; break; default: - txtformat = "unkown format"; + txtformat = "unknown format"; } } PRINTKI("%s%s %s monitor detected: %s\n", diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 505c0823a10..2cf7ba52f67 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -158,7 +158,7 @@ static int atmel_pwm_bl_probe(struct platform_device *pdev) goto err_free_pwm; } - /* Turn display off by defatult. */ + /* Turn display off by default. */ retval = gpio_direction_output(pwmbl->gpio_on, 0 ^ pdata->on_active_low); if (retval) diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index 50ec17dfc51..fa32b94a454 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -177,7 +177,7 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi) if (!data) return -ENOMEM; - data->is_vga = true; /* defaut to VGA mode */ + data->is_vga = true; /* default to VGA mode */ /* * bits_per_word cannot be configured in platform data diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c index 509cb92e873..df9ccb901d8 100644 --- a/drivers/video/broadsheetfb.c +++ b/drivers/video/broadsheetfb.c @@ -470,7 +470,7 @@ static int __devinit broadsheetfb_probe(struct platform_device *dev) par->read_reg = broadsheet_read_reg; init_waitqueue_head(&par->waitq); - info->flags = FBINFO_FLAG_DEFAULT; + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; info->fbdefio = &broadsheetfb_defio; fb_deferred_io_init(info); diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 857b3668b3b..6468a297e34 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -436,7 +436,7 @@ sti_init_glob_cfg(struct sti_struct *sti, (offs < PCI_BASE_ADDRESS_0 || offs > PCI_BASE_ADDRESS_5)) { printk (KERN_WARNING - "STI pci region maping for region %d (%02x) can't be mapped\n", + "STI pci region mapping for region %d (%02x) can't be mapped\n", i,sti->rm_entry[i]); continue; } diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c index c27ab1ed960..44ce908a478 100644 --- a/drivers/video/fb_defio.c +++ b/drivers/video/fb_defio.c @@ -71,7 +71,7 @@ int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync) { struct fb_info *info = file->private_data; - /* Skip if deferred io is complied-in but disabled on this fbdev */ + /* Skip if deferred io is compiled-in but disabled on this fbdev */ if (!info->fbdefio) return 0; @@ -144,7 +144,9 @@ static const struct address_space_operations fb_deferred_io_aops = { static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma) { vma->vm_ops = &fb_deferred_io_vm_ops; - vma->vm_flags |= ( VM_IO | VM_RESERVED | VM_DONTEXPAND ); + vma->vm_flags |= ( VM_RESERVED | VM_DONTEXPAND ); + if (!(info->flags & FBINFO_VIRTFB)) + vma->vm_flags |= VM_IO; vma->vm_private_data = info; return 0; } diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index f67db426837..695fa013fe7 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -701,7 +701,7 @@ static int gbefb_set_par(struct fb_info *info) blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit, 16bit and 32 bit modes (64 kB). They cover the screen with partial tiles on the right and/or bottom of the screen if needed. - For exemple in 640x480 8 bit mode the mapping is: + For example in 640x480 8 bit mode the mapping is: <-------- 640 -----> <---- 512 ----><128|384 offscreen> diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c index 0b4bffbe67c..f9d77adf035 100644 --- a/drivers/video/hecubafb.c +++ b/drivers/video/hecubafb.c @@ -253,7 +253,7 @@ static int __devinit hecubafb_probe(struct platform_device *dev) par->send_command = apollo_send_command; par->send_data = apollo_send_data; - info->flags = FBINFO_FLAG_DEFAULT; + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; info->fbdefio = &hecubafb_defio; fb_deferred_io_init(info); diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c index df1f757a616..661bfd20d19 100644 --- a/drivers/video/metronomefb.c +++ b/drivers/video/metronomefb.c @@ -700,7 +700,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev) if (retval < 0) goto err_free_irq; - info->flags = FBINFO_FLAG_DEFAULT; + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; info->fbdefio = &metronomefb_defio; fb_deferred_io_init(info); diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index 551e3e9c4cb..455c6055325 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig @@ -1,6 +1,7 @@ config FB_OMAP tristate "OMAP frame buffer support (EXPERIMENTAL)" - depends on FB && ARCH_OMAP + depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") + select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID config FB_OMAP_BOOTLOADER_INIT bool "Check bootloader initialization" - depends on FB_OMAP + depends on FB_OMAP || FB_OMAP2 help Say Y here if you want to enable checking if the bootloader has already initialized the display controller. In this case the diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c index f5d75f22cef..2ffb34af4c5 100644 --- a/drivers/video/omap/blizzard.c +++ b/drivers/video/omap/blizzard.c @@ -27,9 +27,9 @@ #include <linux/clk.h> #include <plat/dma.h> -#include <plat/omapfb.h> #include <plat/blizzard.h> +#include "omapfb.h" #include "dispc.h" #define MODULE_NAME "blizzard" diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 7c833db4f9b..c7c6455f1fa 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -24,11 +24,12 @@ #include <linux/vmalloc.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <plat/sram.h> -#include <plat/omapfb.h> #include <plat/board.h> +#include "omapfb.h" #include "dispc.h" #define MODULE_NAME "dispc" @@ -188,6 +189,11 @@ static struct { struct omapfb_color_key color_key; } dispc; +static struct platform_device omapdss_device = { + .name = "omapdss", + .id = -1, +}; + static void enable_lcd_clocks(int enable); static void inline dispc_write_reg(int idx, u32 val) @@ -914,20 +920,20 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); + dispc.dss_ick = clk_get(&omapdss_device.dev, "ick"); if (IS_ERR(dispc.dss_ick)) { dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); + dispc.dss1_fck = clk_get(&omapdss_device.dev, "dss1_fck"); if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); + dispc.dss_54m_fck = clk_get(&omapdss_device.dev, "tv_fck"); if (IS_ERR(dispc.dss_54m_fck)) { dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); @@ -1379,6 +1385,12 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, int skip_init = 0; int i; + r = platform_device_register(&omapdss_device); + if (r) { + dev_err(fbdev->dev, "can't register omapdss device\n"); + return r; + } + memset(&dispc, 0, sizeof(dispc)); dispc.base = ioremap(DISPC_BASE, SZ_1K); @@ -1522,6 +1534,7 @@ static void omap_dispc_cleanup(void) free_irq(INT_24XX_DSS_IRQ, dispc.fbdev); put_dss_clocks(); iounmap(dispc.base); + platform_device_unregister(&omapdss_device); } const struct lcd_ctrl omap2_int_ctrl = { diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c index 17a975e4c9c..0016f77cd13 100644 --- a/drivers/video/omap/hwa742.c +++ b/drivers/video/omap/hwa742.c @@ -25,10 +25,11 @@ #include <linux/fb.h> #include <linux/delay.h> #include <linux/clk.h> +#include <linux/interrupt.h> #include <plat/dma.h> -#include <plat/omapfb.h> #include <plat/hwa742.h> +#include "omapfb.h" #define HWA742_REV_CODE_REG 0x0 #define HWA742_CONFIG_REG 0x2 diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c index fea7feee0b7..760645d9dbb 100644 --- a/drivers/video/omap/lcd_2430sdp.c +++ b/drivers/video/omap/lcd_2430sdp.c @@ -28,9 +28,10 @@ #include <linux/i2c/twl4030.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 3d5277252ca..567db6ac32c 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -27,7 +27,8 @@ #include <plat/board-ams-delta.h> #include <mach/hardware.h> -#include <plat/omapfb.h> + +#include "omapfb.h" #define AMS_DELTA_DEFAULT_CONTRAST 112 @@ -123,12 +124,12 @@ struct platform_driver ams_delta_panel_driver = { }, }; -static int ams_delta_panel_drv_init(void) +static int __init ams_delta_panel_drv_init(void) { return platform_driver_register(&ams_delta_panel_driver); } -static void ams_delta_panel_drv_cleanup(void) +static void __exit ams_delta_panel_drv_cleanup(void) { platform_driver_unregister(&ams_delta_panel_driver); } diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c index 4c5cefc5153..2be94eb3bbf 100644 --- a/drivers/video/omap/lcd_apollon.c +++ b/drivers/video/omap/lcd_apollon.c @@ -26,7 +26,8 @@ #include <mach/gpio.h> #include <plat/mux.h> -#include <plat/omapfb.h> + +#include "omapfb.h" /* #define USE_35INCH_LCD 1 */ diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c index 240b4fb1074..8df688748b5 100644 --- a/drivers/video/omap/lcd_h3.c +++ b/drivers/video/omap/lcd_h3.c @@ -24,7 +24,7 @@ #include <linux/i2c/tps65010.h> #include <mach/gpio.h> -#include <plat/omapfb.h> +#include "omapfb.h" #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c index 720625da1f4..03a06a98275 100644 --- a/drivers/video/omap/lcd_h4.c +++ b/drivers/video/omap/lcd_h4.c @@ -22,7 +22,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c index 2e0c81ea748..a9007c5d1fa 100644 --- a/drivers/video/omap/lcd_htcherald.c +++ b/drivers/video/omap/lcd_htcherald.c @@ -29,7 +29,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int htcherald_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c index aafe9b497e2..3271f1643b2 100644 --- a/drivers/video/omap/lcd_inn1510.c +++ b/drivers/video/omap/lcd_inn1510.c @@ -24,7 +24,7 @@ #include <linux/io.h> #include <plat/fpga.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int innovator1510_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index 0de338264a8..9fff86f67bd 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c @@ -23,7 +23,7 @@ #include <linux/platform_device.h> #include <mach/gpio.h> -#include <plat/omapfb.h> +#include "omapfb.h" #define MODULE_NAME "omapfb-lcd_h3" diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index 6a260dfdadc..5bb7f6f1460 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c @@ -28,9 +28,10 @@ #include <mach/gpio.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index 2162eb09e0f..abe1c76a325 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c @@ -23,9 +23,10 @@ #include <linux/workqueue.h> #include <linux/spi/spi.h> -#include <plat/omapfb.h> #include <plat/lcd_mipid.h> +#include "omapfb.h" + #define MIPID_MODULE_NAME "lcd_mipid" #define MIPID_CMD_READ_DISP_ID 0x04 @@ -607,7 +608,7 @@ static struct spi_driver mipid_spi_driver = { .remove = __devexit_p(mipid_spi_remove), }; -static int mipid_drv_init(void) +static int __init mipid_drv_init(void) { spi_register_driver(&mipid_spi_driver); @@ -615,7 +616,7 @@ static int mipid_drv_init(void) } module_init(mipid_drv_init); -static void mipid_drv_cleanup(void) +static void __exit mipid_drv_cleanup(void) { spi_unregister_driver(&mipid_spi_driver); } diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index e1a38abca3e..006c2fe7360 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c @@ -27,9 +27,10 @@ #include <linux/i2c/twl4030.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define LCD_PANEL_ENABLE_GPIO 154 #define LCD_PANEL_LR 128 #define LCD_PANEL_UD 129 diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index ccec084ed64..fc503d8f3c2 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c @@ -26,9 +26,11 @@ #include <linux/i2c/twl4030.h> #include <plat/mux.h> -#include <plat/omapfb.h> +#include <plat/mux.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define LCD_PANEL_ENABLE_GPIO 170 static int omap3beagle_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index 556eb31db24..ae2edc4081a 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -26,9 +26,10 @@ #include <linux/i2c/twl4030.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define LCD_PANEL_ENABLE_GPIO 153 #define LCD_PANEL_LR 2 #define LCD_PANEL_UD 3 diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index bb21d7dca39..b87e8b83f29 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -25,7 +25,7 @@ #include <mach/gpio.h> #include <plat/mux.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index b0f86e514cd..56ee192e9ee 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c @@ -25,9 +25,10 @@ #include <mach/gpio.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #define LCD_ENABLE 144 static int overo_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c index d30289603ce..4cb301750d0 100644 --- a/drivers/video/omap/lcd_palmte.c +++ b/drivers/video/omap/lcd_palmte.c @@ -24,7 +24,7 @@ #include <linux/io.h> #include <plat/fpga.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int palmte_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c index 557424fb6df..ff0e6d7ab3a 100644 --- a/drivers/video/omap/lcd_palmtt.c +++ b/drivers/video/omap/lcd_palmtt.c @@ -30,7 +30,7 @@ GPIO13 - screen blanking #include <linux/io.h> #include <mach/gpio.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int palmtt_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c index 5f4b5b2c1f4..2334e56536b 100644 --- a/drivers/video/omap/lcd_palmz71.c +++ b/drivers/video/omap/lcd_palmz71.c @@ -24,7 +24,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <plat/omapfb.h> +#include "omapfb.h" static int palmz71_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 5f32cafbf74..a33483910dc 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -29,47 +29,17 @@ #include <linux/vmalloc.h> #include <linux/clk.h> +#include <mach/lcdc.h> #include <plat/dma.h> -#include <plat/omapfb.h> #include <asm/mach-types.h> +#include "omapfb.h" + #include "lcdc.h" #define MODULE_NAME "lcdc" -#define OMAP_LCDC_BASE 0xfffec000 -#define OMAP_LCDC_SIZE 256 -#define OMAP_LCDC_IRQ INT_LCD_CTRL - -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) - -#define OMAP_LCDC_STAT_DONE (1 << 0) -#define OMAP_LCDC_STAT_VSYNC (1 << 1) -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) -#define OMAP_LCDC_STAT_ABC (1 << 3) -#define OMAP_LCDC_STAT_LINE_INT (1 << 4) -#define OMAP_LCDC_STAT_FUF (1 << 5) -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) - -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) - -#define OMAP_LCDC_IRQ_VSYNC (1 << 2) -#define OMAP_LCDC_IRQ_DONE (1 << 3) -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) -#define OMAP_LCDC_IRQ_LINE (1 << 6) -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) - #define MAX_PALETTE_SIZE PAGE_SIZE enum lcdc_load_mode { diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h new file mode 100644 index 00000000000..46e4714014e --- /dev/null +++ b/drivers/video/omap/omapfb.h @@ -0,0 +1,227 @@ +/* + * File: drivers/video/omap/omapfb.h + * + * Framebuffer driver for TI OMAP boards + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAPFB_H +#define __OMAPFB_H + +#include <linux/fb.h> +#include <linux/mutex.h> +#include <linux/omapfb.h> + +#define OMAPFB_EVENT_READY 1 +#define OMAPFB_EVENT_DISABLED 2 + +#define OMAP_LCDC_INV_VSYNC 0x0001 +#define OMAP_LCDC_INV_HSYNC 0x0002 +#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 + +#define OMAP_LCDC_SIGNAL_MASK 0x003f + +#define OMAP_LCDC_PANEL_TFT 0x0100 + +#define OMAPFB_PLANE_XRES_MIN 8 +#define OMAPFB_PLANE_YRES_MIN 8 + +struct omapfb_device; + +struct lcd_panel { + const char *name; + int config; /* TFT/STN, signal inversion */ + int bpp; /* Pixel format in fb mem */ + int data_lines; /* Lines on LCD HW interface */ + + int x_res, y_res; + int pixel_clock; /* In kHz */ + int hsw; /* Horizontal synchronization + pulse width */ + int hfp; /* Horizontal front porch */ + int hbp; /* Horizontal back porch */ + int vsw; /* Vertical synchronization + pulse width */ + int vfp; /* Vertical front porch */ + int vbp; /* Vertical back porch */ + int acb; /* ac-bias pin frequency */ + int pcd; /* pixel clock divider. + Obsolete use pixel_clock instead */ + + int (*init) (struct lcd_panel *panel, + struct omapfb_device *fbdev); + void (*cleanup) (struct lcd_panel *panel); + int (*enable) (struct lcd_panel *panel); + void (*disable) (struct lcd_panel *panel); + unsigned long (*get_caps) (struct lcd_panel *panel); + int (*set_bklight_level)(struct lcd_panel *panel, + unsigned int level); + unsigned int (*get_bklight_level)(struct lcd_panel *panel); + unsigned int (*get_bklight_max) (struct lcd_panel *panel); + int (*run_test) (struct lcd_panel *panel, int test_num); +}; + +struct extif_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by extif->convert_timings */ + + int converted; +}; + +struct lcd_ctrl_extif { + int (*init) (struct omapfb_device *fbdev); + void (*cleanup) (void); + void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); + unsigned long (*get_max_tx_rate)(void); + int (*convert_timings) (struct extif_timings *timings); + void (*set_timings) (const struct extif_timings *timings); + void (*set_bits_per_cycle)(int bpc); + void (*write_command) (const void *buf, unsigned int len); + void (*read_data) (void *buf, unsigned int len); + void (*write_data) (const void *buf, unsigned int len); + void (*transfer_area) (int width, int height, + void (callback)(void *data), void *data); + int (*setup_tearsync) (unsigned pin_cnt, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int div); + int (*enable_tearsync) (int enable, unsigned line); + + unsigned long max_transmit_size; +}; + +struct omapfb_notifier_block { + struct notifier_block nb; + void *data; + int plane_idx; +}; + +typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, + unsigned long event, + void *fbi); + +struct lcd_ctrl { + const char *name; + void *data; + + int (*init) (struct omapfb_device *fbdev, + int ext_mode, + struct omapfb_mem_desc *req_md); + void (*cleanup) (void); + void (*bind_client) (struct omapfb_notifier_block *nb); + void (*get_caps) (int plane, struct omapfb_caps *caps); + int (*set_update_mode)(enum omapfb_update_mode mode); + enum omapfb_update_mode (*get_update_mode)(void); + int (*setup_plane) (int plane, int channel_out, + unsigned long offset, + int screen_width, + int pos_x, int pos_y, int width, + int height, int color_mode); + int (*set_rotate) (int angle); + int (*setup_mem) (int plane, size_t size, + int mem_type, unsigned long *paddr); + int (*mmap) (struct fb_info *info, + struct vm_area_struct *vma); + int (*set_scale) (int plane, + int orig_width, int orig_height, + int out_width, int out_height); + int (*enable_plane) (int plane, int enable); + int (*update_window) (struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + void (*sync) (void); + void (*suspend) (void); + void (*resume) (void); + int (*run_test) (int test_num); + int (*setcolreg) (u_int regno, u16 red, u16 green, + u16 blue, u16 transp, + int update_hw_mem); + int (*set_color_key) (struct omapfb_color_key *ck); + int (*get_color_key) (struct omapfb_color_key *ck); +}; + +enum omapfb_state { + OMAPFB_DISABLED = 0, + OMAPFB_SUSPENDED = 99, + OMAPFB_ACTIVE = 100 +}; + +struct omapfb_plane_struct { + int idx; + struct omapfb_plane_info info; + enum omapfb_color_format color_mode; + struct omapfb_device *fbdev; +}; + +struct omapfb_device { + int state; + int ext_lcdc; /* Using external + LCD controller */ + struct mutex rqueue_mutex; + + int palette_size; + u32 pseudo_palette[17]; + + struct lcd_panel *panel; /* LCD panel */ + const struct lcd_ctrl *ctrl; /* LCD controller */ + const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ + struct lcd_ctrl_extif *ext_if; /* LCD ctrl external + interface */ + struct device *dev; + struct fb_var_screeninfo new_var; /* for mode changes */ + + struct omapfb_mem_desc mem_desc; + struct fb_info *fb_info[OMAPFB_PLANE_NUM]; +}; + +#ifdef CONFIG_ARCH_OMAP1 +extern struct lcd_ctrl omap1_lcd_ctrl; +#else +extern struct lcd_ctrl omap2_disp_ctrl; +#endif + +extern void omapfb_register_panel(struct lcd_panel *panel); +extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +extern void omapfb_notify_clients(struct omapfb_device *fbdev, + unsigned long event); +extern int omapfb_register_client(struct omapfb_notifier_block *nb, + omapfb_notifier_callback_t callback, + void *callback_data); +extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); +extern int omapfb_update_window_async(struct fb_info *fbi, + struct omapfb_update_window *win, + void (*callback)(void *), + void *callback_data); + +#endif /* __OMAPFB_H */ diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index f900a43db8d..c7f59a5ccdb 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -29,8 +29,8 @@ #include <linux/uaccess.h> #include <plat/dma.h> -#include <plat/omapfb.h> +#include "omapfb.h" #include "lcdc.h" #include "dispc.h" diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index c90fa39486b..fed7b1bda19 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -27,8 +27,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/omapfb.h> - +#include "omapfb.h" #include "dispc.h" /* To work around an RFBI transfer rate limitation */ diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index 79dc84f0971..8fb7c708f56 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -23,10 +23,11 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/interrupt.h> #include <plat/dma.h> -#include <plat/omapfb.h> +#include "omapfb.h" #include "lcdc.h" #define MODULE_NAME "omapfb-sossi" diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig new file mode 100644 index 00000000000..d877c361abd --- /dev/null +++ b/drivers/video/omap2/Kconfig @@ -0,0 +1,9 @@ +config OMAP2_VRAM + bool + +config OMAP2_VRFB + bool + +source "drivers/video/omap2/dss/Kconfig" +source "drivers/video/omap2/omapfb/Kconfig" +source "drivers/video/omap2/displays/Kconfig" diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile new file mode 100644 index 00000000000..d853d05dad3 --- /dev/null +++ b/drivers/video/omap2/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_OMAP2_VRAM) += vram.o +obj-$(CONFIG_OMAP2_VRFB) += vrfb.o + +obj-y += dss/ +obj-y += omapfb/ +obj-y += displays/ diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig new file mode 100644 index 00000000000..b12a59c9c50 --- /dev/null +++ b/drivers/video/omap2/displays/Kconfig @@ -0,0 +1,22 @@ +menu "OMAP2/3 Display Device Drivers" + depends on OMAP2_DSS + +config PANEL_GENERIC + tristate "Generic Panel" + help + Generic panel driver. + Used for DVI output for Beagle and OMAP3 SDP. + +config PANEL_SHARP_LS037V7DW01 + tristate "Sharp LS037V7DW01 LCD Panel" + depends on OMAP2_DSS + help + LCD Panel used in TI's SDP3430 and EVM boards + +config PANEL_TAAL + tristate "Taal DSI Panel" + depends on OMAP2_DSS_DSI + help + Taal DSI command mode panel from TPO. + +endmenu diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile new file mode 100644 index 00000000000..955646440b3 --- /dev/null +++ b/drivers/video/omap2/displays/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o +obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o + +obj-$(CONFIG_PANEL_TAAL) += panel-taal.o diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c new file mode 100644 index 00000000000..eb48d1afd80 --- /dev/null +++ b/drivers/video/omap2/displays/panel-generic.c @@ -0,0 +1,104 @@ +/* + * Generic panel support + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> + +#include <plat/display.h> + +static struct omap_video_timings generic_panel_timings = { + /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ + .x_res = 640, + .y_res = 480, + .pixel_clock = 23500, + .hfp = 48, + .hsw = 32, + .hbp = 80, + .vfp = 3, + .vsw = 4, + .vbp = 7, +}; + +static int generic_panel_probe(struct omap_dss_device *dssdev) +{ + dssdev->panel.config = OMAP_DSS_LCD_TFT; + dssdev->panel.timings = generic_panel_timings; + + return 0; +} + +static void generic_panel_remove(struct omap_dss_device *dssdev) +{ +} + +static int generic_panel_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + + if (dssdev->platform_enable) + r = dssdev->platform_enable(dssdev); + + return r; +} + +static void generic_panel_disable(struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); +} + +static int generic_panel_suspend(struct omap_dss_device *dssdev) +{ + generic_panel_disable(dssdev); + return 0; +} + +static int generic_panel_resume(struct omap_dss_device *dssdev) +{ + return generic_panel_enable(dssdev); +} + +static struct omap_dss_driver generic_driver = { + .probe = generic_panel_probe, + .remove = generic_panel_remove, + + .enable = generic_panel_enable, + .disable = generic_panel_disable, + .suspend = generic_panel_suspend, + .resume = generic_panel_resume, + + .driver = { + .name = "generic_panel", + .owner = THIS_MODULE, + }, +}; + +static int __init generic_panel_drv_init(void) +{ + return omap_dss_register_driver(&generic_driver); +} + +static void __exit generic_panel_drv_exit(void) +{ + omap_dss_unregister_driver(&generic_driver); +} + +module_init(generic_panel_drv_init); +module_exit(generic_panel_drv_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c new file mode 100644 index 00000000000..bbe880bbe79 --- /dev/null +++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c @@ -0,0 +1,153 @@ +/* + * LCD panel driver for Sharp LS037V7DW01 + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> + +#include <plat/display.h> + +struct sharp_data { + /* XXX This regulator should actually be in SDP board file, not here, + * as it doesn't actually power the LCD, but something else that + * affects the output to LCD (I think. Somebody clarify). It doesn't do + * harm here, as SDP is the only board using this currently */ + struct regulator *vdvi_reg; +}; + +static struct omap_video_timings sharp_ls_timings = { + .x_res = 480, + .y_res = 640, + + .pixel_clock = 19200, + + .hsw = 2, + .hfp = 1, + .hbp = 28, + + .vsw = 1, + .vfp = 1, + .vbp = 1, +}; + +static int sharp_ls_panel_probe(struct omap_dss_device *dssdev) +{ + struct sharp_data *sd; + + dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS; + dssdev->panel.acb = 0x28; + dssdev->panel.timings = sharp_ls_timings; + + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) + return -ENOMEM; + + dev_set_drvdata(&dssdev->dev, sd); + + sd->vdvi_reg = regulator_get(&dssdev->dev, "vdvi"); + if (IS_ERR(sd->vdvi_reg)) { + kfree(sd); + pr_err("failed to get VDVI regulator\n"); + return PTR_ERR(sd->vdvi_reg); + } + + return 0; +} + +static void sharp_ls_panel_remove(struct omap_dss_device *dssdev) +{ + struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); + + regulator_put(sd->vdvi_reg); + + kfree(sd); +} + +static int sharp_ls_panel_enable(struct omap_dss_device *dssdev) +{ + struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); + int r = 0; + + /* wait couple of vsyncs until enabling the LCD */ + msleep(50); + + regulator_enable(sd->vdvi_reg); + + if (dssdev->platform_enable) + r = dssdev->platform_enable(dssdev); + + return r; +} + +static void sharp_ls_panel_disable(struct omap_dss_device *dssdev) +{ + struct sharp_data *sd = dev_get_drvdata(&dssdev->dev); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + regulator_disable(sd->vdvi_reg); + + /* wait at least 5 vsyncs after disabling the LCD */ + + msleep(100); +} + +static int sharp_ls_panel_suspend(struct omap_dss_device *dssdev) +{ + sharp_ls_panel_disable(dssdev); + return 0; +} + +static int sharp_ls_panel_resume(struct omap_dss_device *dssdev) +{ + return sharp_ls_panel_enable(dssdev); +} + +static struct omap_dss_driver sharp_ls_driver = { + .probe = sharp_ls_panel_probe, + .remove = sharp_ls_panel_remove, + + .enable = sharp_ls_panel_enable, + .disable = sharp_ls_panel_disable, + .suspend = sharp_ls_panel_suspend, + .resume = sharp_ls_panel_resume, + + .driver = { + .name = "sharp_ls_panel", + .owner = THIS_MODULE, + }, +}; + +static int __init sharp_ls_panel_drv_init(void) +{ + return omap_dss_register_driver(&sharp_ls_driver); +} + +static void __exit sharp_ls_panel_drv_exit(void) +{ + omap_dss_unregister_driver(&sharp_ls_driver); +} + +module_init(sharp_ls_panel_drv_init); +module_exit(sharp_ls_panel_drv_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c new file mode 100644 index 00000000000..1f01dfc5e52 --- /dev/null +++ b/drivers/video/omap2/displays/panel-taal.c @@ -0,0 +1,1003 @@ +/* + * Taal DSI command mode panel + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/*#define DEBUG*/ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/jiffies.h> +#include <linux/sched.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/completion.h> +#include <linux/workqueue.h> + +#include <plat/display.h> + +/* DSI Virtual channel. Hardcoded for now. */ +#define TCH 0 + +#define DCS_READ_NUM_ERRORS 0x05 +#define DCS_READ_POWER_MODE 0x0a +#define DCS_READ_MADCTL 0x0b +#define DCS_READ_PIXEL_FORMAT 0x0c +#define DCS_RDDSDR 0x0f +#define DCS_SLEEP_IN 0x10 +#define DCS_SLEEP_OUT 0x11 +#define DCS_DISPLAY_OFF 0x28 +#define DCS_DISPLAY_ON 0x29 +#define DCS_COLUMN_ADDR 0x2a +#define DCS_PAGE_ADDR 0x2b +#define DCS_MEMORY_WRITE 0x2c +#define DCS_TEAR_OFF 0x34 +#define DCS_TEAR_ON 0x35 +#define DCS_MEM_ACC_CTRL 0x36 +#define DCS_PIXEL_FORMAT 0x3a +#define DCS_BRIGHTNESS 0x51 +#define DCS_CTRL_DISPLAY 0x53 +#define DCS_WRITE_CABC 0x55 +#define DCS_READ_CABC 0x56 +#define DCS_GET_ID1 0xda +#define DCS_GET_ID2 0xdb +#define DCS_GET_ID3 0xdc + +/* #define TAAL_USE_ESD_CHECK */ +#define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000) + +struct taal_data { + struct backlight_device *bldev; + + unsigned long hw_guard_end; /* next value of jiffies when we can + * issue the next sleep in/out command + */ + unsigned long hw_guard_wait; /* max guard time in jiffies */ + + struct omap_dss_device *dssdev; + + bool enabled; + u8 rotate; + bool mirror; + + bool te_enabled; + bool use_ext_te; + struct completion te_completion; + + bool use_dsi_bl; + + bool cabc_broken; + unsigned cabc_mode; + + bool intro_printed; + + struct workqueue_struct *esd_wq; + struct delayed_work esd_work; +}; + +static void taal_esd_work(struct work_struct *work); + +static void hw_guard_start(struct taal_data *td, int guard_msec) +{ + td->hw_guard_wait = msecs_to_jiffies(guard_msec); + td->hw_guard_end = jiffies + td->hw_guard_wait; +} + +static void hw_guard_wait(struct taal_data *td) +{ + unsigned long wait = td->hw_guard_end - jiffies; + + if ((long)wait > 0 && wait <= td->hw_guard_wait) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(wait); + } +} + +static int taal_dcs_read_1(u8 dcs_cmd, u8 *data) +{ + int r; + u8 buf[1]; + + r = dsi_vc_dcs_read(TCH, dcs_cmd, buf, 1); + + if (r < 0) + return r; + + *data = buf[0]; + + return 0; +} + +static int taal_dcs_write_0(u8 dcs_cmd) +{ + return dsi_vc_dcs_write(TCH, &dcs_cmd, 1); +} + +static int taal_dcs_write_1(u8 dcs_cmd, u8 param) +{ + u8 buf[2]; + buf[0] = dcs_cmd; + buf[1] = param; + return dsi_vc_dcs_write(TCH, buf, 2); +} + +static int taal_sleep_in(struct taal_data *td) + +{ + u8 cmd; + int r; + + hw_guard_wait(td); + + cmd = DCS_SLEEP_IN; + r = dsi_vc_dcs_write_nosync(TCH, &cmd, 1); + if (r) + return r; + + hw_guard_start(td, 120); + + msleep(5); + + return 0; +} + +static int taal_sleep_out(struct taal_data *td) +{ + int r; + + hw_guard_wait(td); + + r = taal_dcs_write_0(DCS_SLEEP_OUT); + if (r) + return r; + + hw_guard_start(td, 120); + + msleep(5); + + return 0; +} + +static int taal_get_id(u8 *id1, u8 *id2, u8 *id3) +{ + int r; + + r = taal_dcs_read_1(DCS_GET_ID1, id1); + if (r) + return r; + r = taal_dcs_read_1(DCS_GET_ID2, id2); + if (r) + return r; + r = taal_dcs_read_1(DCS_GET_ID3, id3); + if (r) + return r; + + return 0; +} + +static int taal_set_addr_mode(u8 rotate, bool mirror) +{ + int r; + u8 mode; + int b5, b6, b7; + + r = taal_dcs_read_1(DCS_READ_MADCTL, &mode); + if (r) + return r; + + switch (rotate) { + default: + case 0: + b7 = 0; + b6 = 0; + b5 = 0; + break; + case 1: + b7 = 0; + b6 = 1; + b5 = 1; + break; + case 2: + b7 = 1; + b6 = 1; + b5 = 0; + break; + case 3: + b7 = 1; + b6 = 0; + b5 = 1; + break; + } + + if (mirror) + b6 = !b6; + + mode &= ~((1<<7) | (1<<6) | (1<<5)); + mode |= (b7 << 7) | (b6 << 6) | (b5 << 5); + + return taal_dcs_write_1(DCS_MEM_ACC_CTRL, mode); +} + +static int taal_set_update_window(u16 x, u16 y, u16 w, u16 h) +{ + int r; + u16 x1 = x; + u16 x2 = x + w - 1; + u16 y1 = y; + u16 y2 = y + h - 1; + + u8 buf[5]; + buf[0] = DCS_COLUMN_ADDR; + buf[1] = (x1 >> 8) & 0xff; + buf[2] = (x1 >> 0) & 0xff; + buf[3] = (x2 >> 8) & 0xff; + buf[4] = (x2 >> 0) & 0xff; + + r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); + if (r) + return r; + + buf[0] = DCS_PAGE_ADDR; + buf[1] = (y1 >> 8) & 0xff; + buf[2] = (y1 >> 0) & 0xff; + buf[3] = (y2 >> 8) & 0xff; + buf[4] = (y2 >> 0) & 0xff; + + r = dsi_vc_dcs_write_nosync(TCH, buf, sizeof(buf)); + if (r) + return r; + + dsi_vc_send_bta_sync(TCH); + + return r; +} + +static int taal_bl_update_status(struct backlight_device *dev) +{ + struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev); + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int r; + int level; + + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + level = dev->props.brightness; + else + level = 0; + + dev_dbg(&dssdev->dev, "update brightness to %d\n", level); + + if (td->use_dsi_bl) { + if (td->enabled) { + dsi_bus_lock(); + r = taal_dcs_write_1(DCS_BRIGHTNESS, level); + dsi_bus_unlock(); + if (r) + return r; + } + } else { + if (!dssdev->set_backlight) + return -EINVAL; + + r = dssdev->set_backlight(dssdev, level); + if (r) + return r; + } + + return 0; +} + +static int taal_bl_get_intensity(struct backlight_device *dev) +{ + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + return dev->props.brightness; + + return 0; +} + +static struct backlight_ops taal_bl_ops = { + .get_brightness = taal_bl_get_intensity, + .update_status = taal_bl_update_status, +}; + +static void taal_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + *timings = dssdev->panel.timings; +} + +static void taal_get_resolution(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + + if (td->rotate == 0 || td->rotate == 2) { + *xres = dssdev->panel.timings.x_res; + *yres = dssdev->panel.timings.y_res; + } else { + *yres = dssdev->panel.timings.x_res; + *xres = dssdev->panel.timings.y_res; + } +} + +static irqreturn_t taal_te_isr(int irq, void *data) +{ + struct omap_dss_device *dssdev = data; + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + + complete_all(&td->te_completion); + + return IRQ_HANDLED; +} + +static ssize_t taal_num_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + u8 errors; + int r; + + if (td->enabled) { + dsi_bus_lock(); + r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors); + dsi_bus_unlock(); + } else { + r = -ENODEV; + } + + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%d\n", errors); +} + +static ssize_t taal_hw_revision_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + u8 id1, id2, id3; + int r; + + if (td->enabled) { + dsi_bus_lock(); + r = taal_get_id(&id1, &id2, &id3); + dsi_bus_unlock(); + } else { + r = -ENODEV; + } + + if (r) + return r; + + return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); +} + +static const char *cabc_modes[] = { + "off", /* used also always when CABC is not supported */ + "ui", + "still-image", + "moving-image", +}; + +static ssize_t show_cabc_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + const char *mode_str; + int mode; + int len; + + mode = td->cabc_mode; + + mode_str = "unknown"; + if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes)) + mode_str = cabc_modes[mode]; + len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str); + + return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1; +} + +static ssize_t store_cabc_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int i; + + for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) { + if (sysfs_streq(cabc_modes[i], buf)) + break; + } + + if (i == ARRAY_SIZE(cabc_modes)) + return -EINVAL; + + if (td->enabled) { + dsi_bus_lock(); + if (!td->cabc_broken) + taal_dcs_write_1(DCS_WRITE_CABC, i); + dsi_bus_unlock(); + } + + td->cabc_mode = i; + + return count; +} + +static ssize_t show_cabc_available_modes(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int len; + int i; + + for (i = 0, len = 0; + len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++) + len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s", + i ? " " : "", cabc_modes[i], + i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : ""); + + return len < PAGE_SIZE ? len : PAGE_SIZE - 1; +} + +static DEVICE_ATTR(num_dsi_errors, S_IRUGO, taal_num_errors_show, NULL); +static DEVICE_ATTR(hw_revision, S_IRUGO, taal_hw_revision_show, NULL); +static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR, + show_cabc_mode, store_cabc_mode); +static DEVICE_ATTR(cabc_available_modes, S_IRUGO, + show_cabc_available_modes, NULL); + +static struct attribute *taal_attrs[] = { + &dev_attr_num_dsi_errors.attr, + &dev_attr_hw_revision.attr, + &dev_attr_cabc_mode.attr, + &dev_attr_cabc_available_modes.attr, + NULL, +}; + +static struct attribute_group taal_attr_group = { + .attrs = taal_attrs, +}; + +static int taal_probe(struct omap_dss_device *dssdev) +{ + struct taal_data *td; + struct backlight_device *bldev; + int r; + + const struct omap_video_timings taal_panel_timings = { + .x_res = 864, + .y_res = 480, + }; + + dev_dbg(&dssdev->dev, "probe\n"); + + dssdev->panel.config = OMAP_DSS_LCD_TFT; + dssdev->panel.timings = taal_panel_timings; + dssdev->ctrl.pixel_size = 24; + + td = kzalloc(sizeof(*td), GFP_KERNEL); + if (!td) { + r = -ENOMEM; + goto err0; + } + td->dssdev = dssdev; + + td->esd_wq = create_singlethread_workqueue("taal_esd"); + if (td->esd_wq == NULL) { + dev_err(&dssdev->dev, "can't create ESD workqueue\n"); + r = -ENOMEM; + goto err2; + } + INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work); + + dev_set_drvdata(&dssdev->dev, td); + + dssdev->get_timings = taal_get_timings; + dssdev->get_resolution = taal_get_resolution; + + /* if no platform set_backlight() defined, presume DSI backlight + * control */ + if (!dssdev->set_backlight) + td->use_dsi_bl = true; + + bldev = backlight_device_register("taal", &dssdev->dev, dssdev, + &taal_bl_ops); + if (IS_ERR(bldev)) { + r = PTR_ERR(bldev); + goto err1; + } + + td->bldev = bldev; + + bldev->props.fb_blank = FB_BLANK_UNBLANK; + bldev->props.power = FB_BLANK_UNBLANK; + if (td->use_dsi_bl) { + bldev->props.max_brightness = 255; + bldev->props.brightness = 255; + } else { + bldev->props.max_brightness = 127; + bldev->props.brightness = 127; + } + + taal_bl_update_status(bldev); + + if (dssdev->phy.dsi.ext_te) { + int gpio = dssdev->phy.dsi.ext_te_gpio; + + r = gpio_request(gpio, "taal irq"); + if (r) { + dev_err(&dssdev->dev, "GPIO request failed\n"); + goto err3; + } + + gpio_direction_input(gpio); + + r = request_irq(gpio_to_irq(gpio), taal_te_isr, + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "taal vsync", dssdev); + + if (r) { + dev_err(&dssdev->dev, "IRQ request failed\n"); + gpio_free(gpio); + goto err3; + } + + init_completion(&td->te_completion); + + td->use_ext_te = true; + } + + r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group); + if (r) { + dev_err(&dssdev->dev, "failed to create sysfs files\n"); + goto err4; + } + + return 0; +err4: + if (td->use_ext_te) { + int gpio = dssdev->phy.dsi.ext_te_gpio; + free_irq(gpio_to_irq(gpio), dssdev); + gpio_free(gpio); + } +err3: + backlight_device_unregister(bldev); +err2: + cancel_delayed_work_sync(&td->esd_work); + destroy_workqueue(td->esd_wq); +err1: + kfree(td); +err0: + return r; +} + +static void taal_remove(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bldev; + + dev_dbg(&dssdev->dev, "remove\n"); + + sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group); + + if (td->use_ext_te) { + int gpio = dssdev->phy.dsi.ext_te_gpio; + free_irq(gpio_to_irq(gpio), dssdev); + gpio_free(gpio); + } + + bldev = td->bldev; + bldev->props.power = FB_BLANK_POWERDOWN; + taal_bl_update_status(bldev); + backlight_device_unregister(bldev); + + cancel_delayed_work_sync(&td->esd_work); + destroy_workqueue(td->esd_wq); + + kfree(td); +} + +static int taal_enable(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + u8 id1, id2, id3; + int r; + + dev_dbg(&dssdev->dev, "enable\n"); + + if (dssdev->platform_enable) { + r = dssdev->platform_enable(dssdev); + if (r) + return r; + } + + /* it seems we have to wait a bit until taal is ready */ + msleep(5); + + r = taal_sleep_out(td); + if (r) + goto err; + + r = taal_get_id(&id1, &id2, &id3); + if (r) + goto err; + + /* on early revisions CABC is broken */ + if (id2 == 0x00 || id2 == 0xff || id2 == 0x81) + td->cabc_broken = true; + + taal_dcs_write_1(DCS_BRIGHTNESS, 0xff); + taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */ + + taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */ + + taal_set_addr_mode(td->rotate, td->mirror); + if (!td->cabc_broken) + taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode); + + taal_dcs_write_0(DCS_DISPLAY_ON); + +#ifdef TAAL_USE_ESD_CHECK + queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); +#endif + + td->enabled = 1; + + if (!td->intro_printed) { + dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n", + id1, id2, id3); + if (td->cabc_broken) + dev_info(&dssdev->dev, + "old Taal version, CABC disabled\n"); + td->intro_printed = true; + } + + return 0; +err: + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + return r; +} + +static void taal_disable(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + + dev_dbg(&dssdev->dev, "disable\n"); + + cancel_delayed_work(&td->esd_work); + + taal_dcs_write_0(DCS_DISPLAY_OFF); + taal_sleep_in(td); + + /* wait a bit so that the message goes through */ + msleep(10); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + td->enabled = 0; +} + +static int taal_suspend(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bldev = td->bldev; + + bldev->props.power = FB_BLANK_POWERDOWN; + taal_bl_update_status(bldev); + + return 0; +} + +static int taal_resume(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct backlight_device *bldev = td->bldev; + + bldev->props.power = FB_BLANK_UNBLANK; + taal_bl_update_status(bldev); + + return 0; +} + +static void taal_setup_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + taal_set_update_window(x, y, w, h); +} + +static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int r; + + td->te_enabled = enable; + + if (enable) + r = taal_dcs_write_1(DCS_TEAR_ON, 0); + else + r = taal_dcs_write_0(DCS_TEAR_OFF); + + return r; +} + +static int taal_wait_te(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + long wait = msecs_to_jiffies(500); + + if (!td->use_ext_te || !td->te_enabled) + return 0; + + INIT_COMPLETION(td->te_completion); + wait = wait_for_completion_timeout(&td->te_completion, wait); + if (wait == 0) { + dev_err(&dssdev->dev, "timeout waiting TE\n"); + return -ETIME; + } + + return 0; +} + +static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int r; + + dev_dbg(&dssdev->dev, "rotate %d\n", rotate); + + if (td->enabled) { + r = taal_set_addr_mode(rotate, td->mirror); + + if (r) + return r; + } + + td->rotate = rotate; + + return 0; +} + +static u8 taal_get_rotate(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + return td->rotate; +} + +static int taal_mirror(struct omap_dss_device *dssdev, bool enable) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int r; + + dev_dbg(&dssdev->dev, "mirror %d\n", enable); + + if (td->enabled) { + r = taal_set_addr_mode(td->rotate, enable); + + if (r) + return r; + } + + td->mirror = enable; + + return 0; +} + +static bool taal_get_mirror(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + return td->mirror; +} + +static int taal_run_test(struct omap_dss_device *dssdev, int test_num) +{ + u8 id1, id2, id3; + int r; + + r = taal_dcs_read_1(DCS_GET_ID1, &id1); + if (r) + return r; + r = taal_dcs_read_1(DCS_GET_ID2, &id2); + if (r) + return r; + r = taal_dcs_read_1(DCS_GET_ID3, &id3); + if (r) + return r; + + return 0; +} + +static int taal_memory_read(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h) +{ + int r; + int first = 1; + int plen; + unsigned buf_used = 0; + + if (size < w * h * 3) + return -ENOMEM; + + size = min(w * h * 3, + dssdev->panel.timings.x_res * + dssdev->panel.timings.y_res * 3); + + /* plen 1 or 2 goes into short packet. until checksum error is fixed, + * use short packets. plen 32 works, but bigger packets seem to cause + * an error. */ + if (size % 2) + plen = 1; + else + plen = 2; + + taal_setup_update(dssdev, x, y, w, h); + + r = dsi_vc_set_max_rx_packet_size(TCH, plen); + if (r) + return r; + + while (buf_used < size) { + u8 dcs_cmd = first ? 0x2e : 0x3e; + first = 0; + + r = dsi_vc_dcs_read(TCH, dcs_cmd, + buf + buf_used, size - buf_used); + + if (r < 0) { + dev_err(&dssdev->dev, "read error\n"); + goto err; + } + + buf_used += r; + + if (r < plen) { + dev_err(&dssdev->dev, "short read\n"); + break; + } + + if (signal_pending(current)) { + dev_err(&dssdev->dev, "signal pending, " + "aborting memory read\n"); + r = -ERESTARTSYS; + goto err; + } + } + + r = buf_used; + +err: + dsi_vc_set_max_rx_packet_size(TCH, 1); + + return r; +} + +static void taal_esd_work(struct work_struct *work) +{ + struct taal_data *td = container_of(work, struct taal_data, + esd_work.work); + struct omap_dss_device *dssdev = td->dssdev; + u8 state1, state2; + int r; + + if (!td->enabled) + return; + + dsi_bus_lock(); + + r = taal_dcs_read_1(DCS_RDDSDR, &state1); + if (r) { + dev_err(&dssdev->dev, "failed to read Taal status\n"); + goto err; + } + + /* Run self diagnostics */ + r = taal_sleep_out(td); + if (r) { + dev_err(&dssdev->dev, "failed to run Taal self-diagnostics\n"); + goto err; + } + + r = taal_dcs_read_1(DCS_RDDSDR, &state2); + if (r) { + dev_err(&dssdev->dev, "failed to read Taal status\n"); + goto err; + } + + /* Each sleep out command will trigger a self diagnostic and flip + * Bit6 if the test passes. + */ + if (!((state1 ^ state2) & (1 << 6))) { + dev_err(&dssdev->dev, "LCD self diagnostics failed\n"); + goto err; + } + /* Self-diagnostics result is also shown on TE GPIO line. We need + * to re-enable TE after self diagnostics */ + if (td->use_ext_te && td->te_enabled) + taal_enable_te(dssdev, true); + + dsi_bus_unlock(); + + queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); + + return; +err: + dev_err(&dssdev->dev, "performing LCD reset\n"); + + taal_disable(dssdev); + taal_enable(dssdev); + + dsi_bus_unlock(); + + queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); +} + +static struct omap_dss_driver taal_driver = { + .probe = taal_probe, + .remove = taal_remove, + + .enable = taal_enable, + .disable = taal_disable, + .suspend = taal_suspend, + .resume = taal_resume, + + .setup_update = taal_setup_update, + .enable_te = taal_enable_te, + .wait_for_te = taal_wait_te, + .set_rotate = taal_rotate, + .get_rotate = taal_get_rotate, + .set_mirror = taal_mirror, + .get_mirror = taal_get_mirror, + .run_test = taal_run_test, + .memory_read = taal_memory_read, + + .driver = { + .name = "taal", + .owner = THIS_MODULE, + }, +}; + +static int __init taal_init(void) +{ + omap_dss_register_driver(&taal_driver); + + return 0; +} + +static void __exit taal_exit(void) +{ + omap_dss_unregister_driver(&taal_driver); +} + +module_init(taal_init); +module_exit(taal_exit); + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); +MODULE_DESCRIPTION("Taal Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig new file mode 100644 index 00000000000..71d8dec3063 --- /dev/null +++ b/drivers/video/omap2/dss/Kconfig @@ -0,0 +1,89 @@ +menuconfig OMAP2_DSS + tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" + depends on ARCH_OMAP2 || ARCH_OMAP3 + help + OMAP2/3 Display Subsystem support. + +if OMAP2_DSS + +config OMAP2_VRAM_SIZE + int "VRAM size (MB)" + range 0 32 + default 0 + help + The amount of SDRAM to reserve at boot time for video RAM use. + This VRAM will be used by omapfb and other drivers that need + large continuous RAM area for video use. + + You can also set this with "vram=<bytes>" kernel argument, or + in the board file. + +config OMAP2_DSS_DEBUG_SUPPORT + bool "Debug support" + default y + help + This enables debug messages. You need to enable printing + with 'debug' module parameter. + +config OMAP2_DSS_RFBI + bool "RFBI support" + default n + help + MIPI DBI, or RFBI (Remote Framebuffer Interface), support. + +config OMAP2_DSS_VENC + bool "VENC support" + default y + help + OMAP Video Encoder support. + +config OMAP2_DSS_SDI + bool "SDI support" + depends on ARCH_OMAP3 + default n + help + SDI (Serial Display Interface) support. + +config OMAP2_DSS_DSI + bool "DSI support" + depends on ARCH_OMAP3 + default n + help + MIPI DSI support. + +config OMAP2_DSS_USE_DSI_PLL + bool "Use DSI PLL for PCLK (EXPERIMENTAL)" + default n + depends on OMAP2_DSS_DSI + help + Use DSI PLL to generate pixel clock. Currently only for DPI output. + DSI PLL can be used to generate higher and more precise pixel clocks. + +config OMAP2_DSS_FAKE_VSYNC + bool "Fake VSYNC irq from manual update displays" + default n + help + If this is selected, DSI will generate a fake DISPC VSYNC interrupt + when DSI has sent a frame. This is only needed with DSI or RFBI + displays using manual mode, and you want VSYNC to, for example, + time animation. + +config OMAP2_DSS_MIN_FCK_PER_PCK + int "Minimum FCK/PCK ratio (for scaling)" + range 0 32 + default 0 + help + This can be used to adjust the minimum FCK/PCK ratio. + + With this you can make sure that DISPC FCK is at least + n x PCK. Video plane scaling requires higher FCK than + normally. + + If this is set to 0, there's no extra constraint on the + DISPC FCK. However, the FCK will at minimum be + 2xPCK (if active matrix) or 3xPCK (if passive matrix). + + Max FCK is 173MHz, so this doesn't work if your PCK + is very high. + +endif diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile new file mode 100644 index 00000000000..980c72c2db9 --- /dev/null +++ b/drivers/video/omap2/dss/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_OMAP2_DSS) += omapdss.o +omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o +omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o +omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o +omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o +omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c new file mode 100644 index 00000000000..29497a0c9a9 --- /dev/null +++ b/drivers/video/omap2/dss/core.c @@ -0,0 +1,919 @@ +/* + * linux/drivers/video/omap2/dss/core.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "CORE" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> +#include <linux/io.h> +#include <linux/device.h> + +#include <plat/display.h> +#include <plat/clock.h> + +#include "dss.h" + +static struct { + struct platform_device *pdev; + int ctx_id; + + struct clk *dss_ick; + struct clk *dss1_fck; + struct clk *dss2_fck; + struct clk *dss_54m_fck; + struct clk *dss_96m_fck; + unsigned num_clks_enabled; +} core; + +static void dss_clk_enable_all_no_ctx(void); +static void dss_clk_disable_all_no_ctx(void); +static void dss_clk_enable_no_ctx(enum dss_clock clks); +static void dss_clk_disable_no_ctx(enum dss_clock clks); + +static char *def_disp_name; +module_param_named(def_disp, def_disp_name, charp, 0); +MODULE_PARM_DESC(def_disp_name, "default display name"); + +#ifdef DEBUG +unsigned int dss_debug; +module_param_named(debug, dss_debug, bool, 0644); +#endif + +/* CONTEXT */ +static int dss_get_ctx_id(void) +{ + struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; + int r; + + if (!pdata->get_last_off_on_transaction_id) + return 0; + r = pdata->get_last_off_on_transaction_id(&core.pdev->dev); + if (r < 0) { + dev_err(&core.pdev->dev, "getting transaction ID failed, " + "will force context restore\n"); + r = -1; + } + return r; +} + +int dss_need_ctx_restore(void) +{ + int id = dss_get_ctx_id(); + + if (id < 0 || id != core.ctx_id) { + DSSDBG("ctx id %d -> id %d\n", + core.ctx_id, id); + core.ctx_id = id; + return 1; + } else { + return 0; + } +} + +static void save_all_ctx(void) +{ + DSSDBG("save context\n"); + + dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); + + dss_save_context(); + dispc_save_context(); +#ifdef CONFIG_OMAP2_DSS_DSI + dsi_save_context(); +#endif + + dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +static void restore_all_ctx(void) +{ + DSSDBG("restore context\n"); + + dss_clk_enable_all_no_ctx(); + + dss_restore_context(); + dispc_restore_context(); +#ifdef CONFIG_OMAP2_DSS_DSI + dsi_restore_context(); +#endif + + dss_clk_disable_all_no_ctx(); +} + +/* CLOCKS */ +static void core_dump_clocks(struct seq_file *s) +{ + int i; + struct clk *clocks[5] = { + core.dss_ick, + core.dss1_fck, + core.dss2_fck, + core.dss_54m_fck, + core.dss_96m_fck + }; + + seq_printf(s, "- CORE -\n"); + + seq_printf(s, "internal clk count\t\t%u\n", core.num_clks_enabled); + + for (i = 0; i < 5; i++) { + if (!clocks[i]) + continue; + seq_printf(s, "%-15s\t%lu\t%d\n", + clocks[i]->name, + clk_get_rate(clocks[i]), + clocks[i]->usecount); + } +} + +static int dss_get_clock(struct clk **clock, const char *clk_name) +{ + struct clk *clk; + + clk = clk_get(&core.pdev->dev, clk_name); + + if (IS_ERR(clk)) { + DSSERR("can't get clock %s", clk_name); + return PTR_ERR(clk); + } + + *clock = clk; + + DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk)); + + return 0; +} + +static int dss_get_clocks(void) +{ + int r; + + core.dss_ick = NULL; + core.dss1_fck = NULL; + core.dss2_fck = NULL; + core.dss_54m_fck = NULL; + core.dss_96m_fck = NULL; + + r = dss_get_clock(&core.dss_ick, "ick"); + if (r) + goto err; + + r = dss_get_clock(&core.dss1_fck, "dss1_fck"); + if (r) + goto err; + + r = dss_get_clock(&core.dss2_fck, "dss2_fck"); + if (r) + goto err; + + r = dss_get_clock(&core.dss_54m_fck, "tv_fck"); + if (r) + goto err; + + r = dss_get_clock(&core.dss_96m_fck, "video_fck"); + if (r) + goto err; + + return 0; + +err: + if (core.dss_ick) + clk_put(core.dss_ick); + if (core.dss1_fck) + clk_put(core.dss1_fck); + if (core.dss2_fck) + clk_put(core.dss2_fck); + if (core.dss_54m_fck) + clk_put(core.dss_54m_fck); + if (core.dss_96m_fck) + clk_put(core.dss_96m_fck); + + return r; +} + +static void dss_put_clocks(void) +{ + if (core.dss_96m_fck) + clk_put(core.dss_96m_fck); + clk_put(core.dss_54m_fck); + clk_put(core.dss1_fck); + clk_put(core.dss2_fck); + clk_put(core.dss_ick); +} + +unsigned long dss_clk_get_rate(enum dss_clock clk) +{ + switch (clk) { + case DSS_CLK_ICK: + return clk_get_rate(core.dss_ick); + case DSS_CLK_FCK1: + return clk_get_rate(core.dss1_fck); + case DSS_CLK_FCK2: + return clk_get_rate(core.dss2_fck); + case DSS_CLK_54M: + return clk_get_rate(core.dss_54m_fck); + case DSS_CLK_96M: + return clk_get_rate(core.dss_96m_fck); + } + + BUG(); + return 0; +} + +static unsigned count_clk_bits(enum dss_clock clks) +{ + unsigned num_clks = 0; + + if (clks & DSS_CLK_ICK) + ++num_clks; + if (clks & DSS_CLK_FCK1) + ++num_clks; + if (clks & DSS_CLK_FCK2) + ++num_clks; + if (clks & DSS_CLK_54M) + ++num_clks; + if (clks & DSS_CLK_96M) + ++num_clks; + + return num_clks; +} + +static void dss_clk_enable_no_ctx(enum dss_clock clks) +{ + unsigned num_clks = count_clk_bits(clks); + + if (clks & DSS_CLK_ICK) + clk_enable(core.dss_ick); + if (clks & DSS_CLK_FCK1) + clk_enable(core.dss1_fck); + if (clks & DSS_CLK_FCK2) + clk_enable(core.dss2_fck); + if (clks & DSS_CLK_54M) + clk_enable(core.dss_54m_fck); + if (clks & DSS_CLK_96M) + clk_enable(core.dss_96m_fck); + + core.num_clks_enabled += num_clks; +} + +void dss_clk_enable(enum dss_clock clks) +{ + dss_clk_enable_no_ctx(clks); + + if (cpu_is_omap34xx() && dss_need_ctx_restore()) + restore_all_ctx(); +} + +static void dss_clk_disable_no_ctx(enum dss_clock clks) +{ + unsigned num_clks = count_clk_bits(clks); + + if (clks & DSS_CLK_ICK) + clk_disable(core.dss_ick); + if (clks & DSS_CLK_FCK1) + clk_disable(core.dss1_fck); + if (clks & DSS_CLK_FCK2) + clk_disable(core.dss2_fck); + if (clks & DSS_CLK_54M) + clk_disable(core.dss_54m_fck); + if (clks & DSS_CLK_96M) + clk_disable(core.dss_96m_fck); + + core.num_clks_enabled -= num_clks; +} + +void dss_clk_disable(enum dss_clock clks) +{ + if (cpu_is_omap34xx()) { + unsigned num_clks = count_clk_bits(clks); + + BUG_ON(core.num_clks_enabled < num_clks); + + if (core.num_clks_enabled == num_clks) + save_all_ctx(); + } + + dss_clk_disable_no_ctx(clks); +} + +static void dss_clk_enable_all_no_ctx(void) +{ + enum dss_clock clks; + + clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; + if (cpu_is_omap34xx()) + clks |= DSS_CLK_96M; + dss_clk_enable_no_ctx(clks); +} + +static void dss_clk_disable_all_no_ctx(void) +{ + enum dss_clock clks; + + clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; + if (cpu_is_omap34xx()) + clks |= DSS_CLK_96M; + dss_clk_disable_no_ctx(clks); +} + +static void dss_clk_disable_all(void) +{ + enum dss_clock clks; + + clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; + if (cpu_is_omap34xx()) + clks |= DSS_CLK_96M; + dss_clk_disable(clks); +} + +/* DEBUGFS */ +#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) +static void dss_debug_dump_clocks(struct seq_file *s) +{ + core_dump_clocks(s); + dss_dump_clocks(s); + dispc_dump_clocks(s); +#ifdef CONFIG_OMAP2_DSS_DSI + dsi_dump_clocks(s); +#endif +} + +static int dss_debug_show(struct seq_file *s, void *unused) +{ + void (*func)(struct seq_file *) = s->private; + func(s); + return 0; +} + +static int dss_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, dss_debug_show, inode->i_private); +} + +static const struct file_operations dss_debug_fops = { + .open = dss_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *dss_debugfs_dir; + +static int dss_initialize_debugfs(void) +{ + dss_debugfs_dir = debugfs_create_dir("omapdss", NULL); + if (IS_ERR(dss_debugfs_dir)) { + int err = PTR_ERR(dss_debugfs_dir); + dss_debugfs_dir = NULL; + return err; + } + + debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir, + &dss_debug_dump_clocks, &dss_debug_fops); + + debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir, + &dss_dump_regs, &dss_debug_fops); + debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir, + &dispc_dump_regs, &dss_debug_fops); +#ifdef CONFIG_OMAP2_DSS_RFBI + debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir, + &rfbi_dump_regs, &dss_debug_fops); +#endif +#ifdef CONFIG_OMAP2_DSS_DSI + debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir, + &dsi_dump_regs, &dss_debug_fops); +#endif +#ifdef CONFIG_OMAP2_DSS_VENC + debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir, + &venc_dump_regs, &dss_debug_fops); +#endif + return 0; +} + +static void dss_uninitialize_debugfs(void) +{ + if (dss_debugfs_dir) + debugfs_remove_recursive(dss_debugfs_dir); +} +#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */ + +/* PLATFORM DEVICE */ +static int omap_dss_probe(struct platform_device *pdev) +{ + struct omap_dss_board_info *pdata = pdev->dev.platform_data; + int skip_init = 0; + int r; + int i; + + core.pdev = pdev; + + dss_init_overlay_managers(pdev); + dss_init_overlays(pdev); + + r = dss_get_clocks(); + if (r) + goto fail0; + + dss_clk_enable_all_no_ctx(); + + core.ctx_id = dss_get_ctx_id(); + DSSDBG("initial ctx id %u\n", core.ctx_id); + +#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT + /* DISPC_CONTROL */ + if (omap_readl(0x48050440) & 1) /* LCD enabled? */ + skip_init = 1; +#endif + + r = dss_init(skip_init); + if (r) { + DSSERR("Failed to initialize DSS\n"); + goto fail0; + } + +#ifdef CONFIG_OMAP2_DSS_RFBI + r = rfbi_init(); + if (r) { + DSSERR("Failed to initialize rfbi\n"); + goto fail0; + } +#endif + + r = dpi_init(); + if (r) { + DSSERR("Failed to initialize dpi\n"); + goto fail0; + } + + r = dispc_init(); + if (r) { + DSSERR("Failed to initialize dispc\n"); + goto fail0; + } +#ifdef CONFIG_OMAP2_DSS_VENC + r = venc_init(pdev); + if (r) { + DSSERR("Failed to initialize venc\n"); + goto fail0; + } +#endif + if (cpu_is_omap34xx()) { +#ifdef CONFIG_OMAP2_DSS_SDI + r = sdi_init(skip_init); + if (r) { + DSSERR("Failed to initialize SDI\n"); + goto fail0; + } +#endif +#ifdef CONFIG_OMAP2_DSS_DSI + r = dsi_init(pdev); + if (r) { + DSSERR("Failed to initialize DSI\n"); + goto fail0; + } +#endif + } + +#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) + r = dss_initialize_debugfs(); + if (r) + goto fail0; +#endif + + for (i = 0; i < pdata->num_devices; ++i) { + struct omap_dss_device *dssdev = pdata->devices[i]; + + r = omap_dss_register_device(dssdev); + if (r) + DSSERR("device reg failed %d\n", i); + + if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0) + pdata->default_device = dssdev; + } + + dss_clk_disable_all(); + + return 0; + + /* XXX fail correctly */ +fail0: + return r; +} + +static int omap_dss_remove(struct platform_device *pdev) +{ + struct omap_dss_board_info *pdata = pdev->dev.platform_data; + int i; + int c; + +#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) + dss_uninitialize_debugfs(); +#endif + +#ifdef CONFIG_OMAP2_DSS_VENC + venc_exit(); +#endif + dispc_exit(); + dpi_exit(); +#ifdef CONFIG_OMAP2_DSS_RFBI + rfbi_exit(); +#endif + if (cpu_is_omap34xx()) { +#ifdef CONFIG_OMAP2_DSS_DSI + dsi_exit(); +#endif +#ifdef CONFIG_OMAP2_DSS_SDI + sdi_exit(); +#endif + } + + dss_exit(); + + /* these should be removed at some point */ + c = core.dss_ick->usecount; + if (c > 0) { + DSSERR("warning: dss_ick usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(core.dss_ick); + } + + c = core.dss1_fck->usecount; + if (c > 0) { + DSSERR("warning: dss1_fck usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(core.dss1_fck); + } + + c = core.dss2_fck->usecount; + if (c > 0) { + DSSERR("warning: dss2_fck usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(core.dss2_fck); + } + + c = core.dss_54m_fck->usecount; + if (c > 0) { + DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); + while (c-- > 0) + clk_disable(core.dss_54m_fck); + } + + if (core.dss_96m_fck) { + c = core.dss_96m_fck->usecount; + if (c > 0) { + DSSERR("warning: dss_96m_fck usecount %d, disabling\n", + c); + while (c-- > 0) + clk_disable(core.dss_96m_fck); + } + } + + dss_put_clocks(); + + dss_uninit_overlays(pdev); + dss_uninit_overlay_managers(pdev); + + for (i = 0; i < pdata->num_devices; ++i) + omap_dss_unregister_device(pdata->devices[i]); + + return 0; +} + +static void omap_dss_shutdown(struct platform_device *pdev) +{ + DSSDBG("shutdown\n"); + dss_disable_all_devices(); +} + +static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state) +{ + DSSDBG("suspend %d\n", state.event); + + return dss_suspend_all_devices(); +} + +static int omap_dss_resume(struct platform_device *pdev) +{ + DSSDBG("resume\n"); + + return dss_resume_all_devices(); +} + +static struct platform_driver omap_dss_driver = { + .probe = omap_dss_probe, + .remove = omap_dss_remove, + .shutdown = omap_dss_shutdown, + .suspend = omap_dss_suspend, + .resume = omap_dss_resume, + .driver = { + .name = "omapdss", + .owner = THIS_MODULE, + }, +}; + +/* BUS */ +static int dss_bus_match(struct device *dev, struct device_driver *driver) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + + DSSDBG("bus_match. dev %s/%s, drv %s\n", + dev_name(dev), dssdev->driver_name, driver->name); + + return strcmp(dssdev->driver_name, driver->name) == 0; +} + +static ssize_t device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + return snprintf(buf, PAGE_SIZE, "%s\n", + dssdev->name ? + dssdev->name : ""); +} + +static struct device_attribute default_dev_attrs[] = { + __ATTR(name, S_IRUGO, device_name_show, NULL), + __ATTR_NULL, +}; + +static ssize_t driver_name_show(struct device_driver *drv, char *buf) +{ + struct omap_dss_driver *dssdrv = to_dss_driver(drv); + return snprintf(buf, PAGE_SIZE, "%s\n", + dssdrv->driver.name ? + dssdrv->driver.name : ""); +} +static struct driver_attribute default_drv_attrs[] = { + __ATTR(name, S_IRUGO, driver_name_show, NULL), + __ATTR_NULL, +}; + +static struct bus_type dss_bus_type = { + .name = "omapdss", + .match = dss_bus_match, + .dev_attrs = default_dev_attrs, + .drv_attrs = default_drv_attrs, +}; + +static void dss_bus_release(struct device *dev) +{ + DSSDBG("bus_release\n"); +} + +static struct device dss_bus = { + .release = dss_bus_release, +}; + +struct bus_type *dss_get_bus(void) +{ + return &dss_bus_type; +} + +/* DRIVER */ +static int dss_driver_probe(struct device *dev) +{ + int r; + struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); + struct omap_dss_device *dssdev = to_dss_device(dev); + struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; + bool force; + + DSSDBG("driver_probe: dev %s/%s, drv %s\n", + dev_name(dev), dssdev->driver_name, + dssdrv->driver.name); + + dss_init_device(core.pdev, dssdev); + + /* skip this if the device is behind a ctrl */ + if (!dssdev->panel.ctrl) { + force = pdata->default_device == dssdev; + dss_recheck_connections(dssdev, force); + } + + r = dssdrv->probe(dssdev); + + if (r) { + DSSERR("driver probe failed: %d\n", r); + return r; + } + + DSSDBG("probe done for device %s\n", dev_name(dev)); + + dssdev->driver = dssdrv; + + return 0; +} + +static int dss_driver_remove(struct device *dev) +{ + struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver); + struct omap_dss_device *dssdev = to_dss_device(dev); + + DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev), + dssdev->driver_name); + + dssdrv->remove(dssdev); + + dss_uninit_device(core.pdev, dssdev); + + dssdev->driver = NULL; + + return 0; +} + +int omap_dss_register_driver(struct omap_dss_driver *dssdriver) +{ + dssdriver->driver.bus = &dss_bus_type; + dssdriver->driver.probe = dss_driver_probe; + dssdriver->driver.remove = dss_driver_remove; + return driver_register(&dssdriver->driver); +} +EXPORT_SYMBOL(omap_dss_register_driver); + +void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver) +{ + driver_unregister(&dssdriver->driver); +} +EXPORT_SYMBOL(omap_dss_unregister_driver); + +/* DEVICE */ +static void reset_device(struct device *dev, int check) +{ + u8 *dev_p = (u8 *)dev; + u8 *dev_end = dev_p + sizeof(*dev); + void *saved_pdata; + + saved_pdata = dev->platform_data; + if (check) { + /* + * Check if there is any other setting than platform_data + * in struct device; warn that these will be reset by our + * init. + */ + dev->platform_data = NULL; + while (dev_p < dev_end) { + if (*dev_p) { + WARN("%s: struct device fields will be " + "discarded\n", + __func__); + break; + } + dev_p++; + } + } + memset(dev, 0, sizeof(*dev)); + dev->platform_data = saved_pdata; +} + + +static void omap_dss_dev_release(struct device *dev) +{ + reset_device(dev, 0); +} + +int omap_dss_register_device(struct omap_dss_device *dssdev) +{ + static int dev_num; + static int panel_num; + int r; + + WARN_ON(!dssdev->driver_name); + + reset_device(&dssdev->dev, 1); + dssdev->dev.bus = &dss_bus_type; + dssdev->dev.parent = &dss_bus; + dssdev->dev.release = omap_dss_dev_release; + dev_set_name(&dssdev->dev, "display%d", dev_num++); + r = device_register(&dssdev->dev); + if (r) + return r; + + if (dssdev->ctrl.panel) { + struct omap_dss_device *panel = dssdev->ctrl.panel; + + panel->panel.ctrl = dssdev; + + reset_device(&panel->dev, 1); + panel->dev.bus = &dss_bus_type; + panel->dev.parent = &dssdev->dev; + panel->dev.release = omap_dss_dev_release; + dev_set_name(&panel->dev, "panel%d", panel_num++); + r = device_register(&panel->dev); + if (r) + return r; + } + + return 0; +} + +void omap_dss_unregister_device(struct omap_dss_device *dssdev) +{ + device_unregister(&dssdev->dev); + + if (dssdev->ctrl.panel) { + struct omap_dss_device *panel = dssdev->ctrl.panel; + device_unregister(&panel->dev); + } +} + +/* BUS */ +static int omap_dss_bus_register(void) +{ + int r; + + r = bus_register(&dss_bus_type); + if (r) { + DSSERR("bus register failed\n"); + return r; + } + + dev_set_name(&dss_bus, "omapdss"); + r = device_register(&dss_bus); + if (r) { + DSSERR("bus driver register failed\n"); + bus_unregister(&dss_bus_type); + return r; + } + + return 0; +} + +/* INIT */ + +#ifdef CONFIG_OMAP2_DSS_MODULE +static void omap_dss_bus_unregister(void) +{ + device_unregister(&dss_bus); + + bus_unregister(&dss_bus_type); +} + +static int __init omap_dss_init(void) +{ + int r; + + r = omap_dss_bus_register(); + if (r) + return r; + + r = platform_driver_register(&omap_dss_driver); + if (r) { + omap_dss_bus_unregister(); + return r; + } + + return 0; +} + +static void __exit omap_dss_exit(void) +{ + platform_driver_unregister(&omap_dss_driver); + + omap_dss_bus_unregister(); +} + +module_init(omap_dss_init); +module_exit(omap_dss_exit); +#else +static int __init omap_dss_init(void) +{ + return omap_dss_bus_register(); +} + +static int __init omap_dss_init2(void) +{ + return platform_driver_register(&omap_dss_driver); +} + +core_initcall(omap_dss_init); +device_initcall(omap_dss_init2); +#endif + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); +MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c new file mode 100644 index 00000000000..6dabf4b2f00 --- /dev/null +++ b/drivers/video/omap2/dss/dispc.c @@ -0,0 +1,3091 @@ +/* + * linux/drivers/video/omap2/dss/dispc.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DISPC" + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/workqueue.h> + +#include <plat/sram.h> +#include <plat/clock.h> + +#include <plat/display.h> + +#include "dss.h" + +/* DISPC */ +#define DISPC_BASE 0x48050400 + +#define DISPC_SZ_REGS SZ_1K + +struct dispc_reg { u16 idx; }; + +#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) + +/* DISPC common */ +#define DISPC_REVISION DISPC_REG(0x0000) +#define DISPC_SYSCONFIG DISPC_REG(0x0010) +#define DISPC_SYSSTATUS DISPC_REG(0x0014) +#define DISPC_IRQSTATUS DISPC_REG(0x0018) +#define DISPC_IRQENABLE DISPC_REG(0x001C) +#define DISPC_CONTROL DISPC_REG(0x0040) +#define DISPC_CONFIG DISPC_REG(0x0044) +#define DISPC_CAPABLE DISPC_REG(0x0048) +#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) +#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) +#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) +#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) +#define DISPC_LINE_STATUS DISPC_REG(0x005C) +#define DISPC_LINE_NUMBER DISPC_REG(0x0060) +#define DISPC_TIMING_H DISPC_REG(0x0064) +#define DISPC_TIMING_V DISPC_REG(0x0068) +#define DISPC_POL_FREQ DISPC_REG(0x006C) +#define DISPC_DIVISOR DISPC_REG(0x0070) +#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) +#define DISPC_SIZE_DIG DISPC_REG(0x0078) +#define DISPC_SIZE_LCD DISPC_REG(0x007C) + +/* DISPC GFX plane */ +#define DISPC_GFX_BA0 DISPC_REG(0x0080) +#define DISPC_GFX_BA1 DISPC_REG(0x0084) +#define DISPC_GFX_POSITION DISPC_REG(0x0088) +#define DISPC_GFX_SIZE DISPC_REG(0x008C) +#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) +#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) +#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) +#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) +#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) +#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) +#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) + +#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) +#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) +#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) + +#define DISPC_CPR_COEF_R DISPC_REG(0x0220) +#define DISPC_CPR_COEF_G DISPC_REG(0x0224) +#define DISPC_CPR_COEF_B DISPC_REG(0x0228) + +#define DISPC_GFX_PRELOAD DISPC_REG(0x022C) + +/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ +#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) + +#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) +#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) +#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) +#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) +#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) +#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) +#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) +#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) +#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) +#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) +#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) +#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) +#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) + +/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ +#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) +/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ +#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) +/* coef index i = {0, 1, 2, 3, 4} */ +#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) +/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ +#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) + +#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) + + +#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ + DISPC_IRQ_OCP_ERR | \ + DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ + DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ + DISPC_IRQ_SYNC_LOST | \ + DISPC_IRQ_SYNC_LOST_DIGIT) + +#define DISPC_MAX_NR_ISRS 8 + +struct omap_dispc_isr_data { + omap_dispc_isr_t isr; + void *arg; + u32 mask; +}; + +#define REG_GET(idx, start, end) \ + FLD_GET(dispc_read_reg(idx), start, end) + +#define REG_FLD_MOD(idx, val, start, end) \ + dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) + +static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, + DISPC_VID_ATTRIBUTES(0), + DISPC_VID_ATTRIBUTES(1) }; + +static struct { + void __iomem *base; + + u32 fifo_size[3]; + + spinlock_t irq_lock; + u32 irq_error_mask; + struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; + u32 error_irqs; + struct work_struct error_work; + + u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; +} dispc; + +static void _omap_dispc_set_irqs(void); + +static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) +{ + __raw_writel(val, dispc.base + idx.idx); +} + +static inline u32 dispc_read_reg(const struct dispc_reg idx) +{ + return __raw_readl(dispc.base + idx.idx); +} + +#define SR(reg) \ + dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) +#define RR(reg) \ + dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) + +void dispc_save_context(void) +{ + if (cpu_is_omap24xx()) + return; + + SR(SYSCONFIG); + SR(IRQENABLE); + SR(CONTROL); + SR(CONFIG); + SR(DEFAULT_COLOR0); + SR(DEFAULT_COLOR1); + SR(TRANS_COLOR0); + SR(TRANS_COLOR1); + SR(LINE_NUMBER); + SR(TIMING_H); + SR(TIMING_V); + SR(POL_FREQ); + SR(DIVISOR); + SR(GLOBAL_ALPHA); + SR(SIZE_DIG); + SR(SIZE_LCD); + + SR(GFX_BA0); + SR(GFX_BA1); + SR(GFX_POSITION); + SR(GFX_SIZE); + SR(GFX_ATTRIBUTES); + SR(GFX_FIFO_THRESHOLD); + SR(GFX_ROW_INC); + SR(GFX_PIXEL_INC); + SR(GFX_WINDOW_SKIP); + SR(GFX_TABLE_BA); + + SR(DATA_CYCLE1); + SR(DATA_CYCLE2); + SR(DATA_CYCLE3); + + SR(CPR_COEF_R); + SR(CPR_COEF_G); + SR(CPR_COEF_B); + + SR(GFX_PRELOAD); + + /* VID1 */ + SR(VID_BA0(0)); + SR(VID_BA1(0)); + SR(VID_POSITION(0)); + SR(VID_SIZE(0)); + SR(VID_ATTRIBUTES(0)); + SR(VID_FIFO_THRESHOLD(0)); + SR(VID_ROW_INC(0)); + SR(VID_PIXEL_INC(0)); + SR(VID_FIR(0)); + SR(VID_PICTURE_SIZE(0)); + SR(VID_ACCU0(0)); + SR(VID_ACCU1(0)); + + SR(VID_FIR_COEF_H(0, 0)); + SR(VID_FIR_COEF_H(0, 1)); + SR(VID_FIR_COEF_H(0, 2)); + SR(VID_FIR_COEF_H(0, 3)); + SR(VID_FIR_COEF_H(0, 4)); + SR(VID_FIR_COEF_H(0, 5)); + SR(VID_FIR_COEF_H(0, 6)); + SR(VID_FIR_COEF_H(0, 7)); + + SR(VID_FIR_COEF_HV(0, 0)); + SR(VID_FIR_COEF_HV(0, 1)); + SR(VID_FIR_COEF_HV(0, 2)); + SR(VID_FIR_COEF_HV(0, 3)); + SR(VID_FIR_COEF_HV(0, 4)); + SR(VID_FIR_COEF_HV(0, 5)); + SR(VID_FIR_COEF_HV(0, 6)); + SR(VID_FIR_COEF_HV(0, 7)); + + SR(VID_CONV_COEF(0, 0)); + SR(VID_CONV_COEF(0, 1)); + SR(VID_CONV_COEF(0, 2)); + SR(VID_CONV_COEF(0, 3)); + SR(VID_CONV_COEF(0, 4)); + + SR(VID_FIR_COEF_V(0, 0)); + SR(VID_FIR_COEF_V(0, 1)); + SR(VID_FIR_COEF_V(0, 2)); + SR(VID_FIR_COEF_V(0, 3)); + SR(VID_FIR_COEF_V(0, 4)); + SR(VID_FIR_COEF_V(0, 5)); + SR(VID_FIR_COEF_V(0, 6)); + SR(VID_FIR_COEF_V(0, 7)); + + SR(VID_PRELOAD(0)); + + /* VID2 */ + SR(VID_BA0(1)); + SR(VID_BA1(1)); + SR(VID_POSITION(1)); + SR(VID_SIZE(1)); + SR(VID_ATTRIBUTES(1)); + SR(VID_FIFO_THRESHOLD(1)); + SR(VID_ROW_INC(1)); + SR(VID_PIXEL_INC(1)); + SR(VID_FIR(1)); + SR(VID_PICTURE_SIZE(1)); + SR(VID_ACCU0(1)); + SR(VID_ACCU1(1)); + + SR(VID_FIR_COEF_H(1, 0)); + SR(VID_FIR_COEF_H(1, 1)); + SR(VID_FIR_COEF_H(1, 2)); + SR(VID_FIR_COEF_H(1, 3)); + SR(VID_FIR_COEF_H(1, 4)); + SR(VID_FIR_COEF_H(1, 5)); + SR(VID_FIR_COEF_H(1, 6)); + SR(VID_FIR_COEF_H(1, 7)); + + SR(VID_FIR_COEF_HV(1, 0)); + SR(VID_FIR_COEF_HV(1, 1)); + SR(VID_FIR_COEF_HV(1, 2)); + SR(VID_FIR_COEF_HV(1, 3)); + SR(VID_FIR_COEF_HV(1, 4)); + SR(VID_FIR_COEF_HV(1, 5)); + SR(VID_FIR_COEF_HV(1, 6)); + SR(VID_FIR_COEF_HV(1, 7)); + + SR(VID_CONV_COEF(1, 0)); + SR(VID_CONV_COEF(1, 1)); + SR(VID_CONV_COEF(1, 2)); + SR(VID_CONV_COEF(1, 3)); + SR(VID_CONV_COEF(1, 4)); + + SR(VID_FIR_COEF_V(1, 0)); + SR(VID_FIR_COEF_V(1, 1)); + SR(VID_FIR_COEF_V(1, 2)); + SR(VID_FIR_COEF_V(1, 3)); + SR(VID_FIR_COEF_V(1, 4)); + SR(VID_FIR_COEF_V(1, 5)); + SR(VID_FIR_COEF_V(1, 6)); + SR(VID_FIR_COEF_V(1, 7)); + + SR(VID_PRELOAD(1)); +} + +void dispc_restore_context(void) +{ + RR(SYSCONFIG); + RR(IRQENABLE); + /*RR(CONTROL);*/ + RR(CONFIG); + RR(DEFAULT_COLOR0); + RR(DEFAULT_COLOR1); + RR(TRANS_COLOR0); + RR(TRANS_COLOR1); + RR(LINE_NUMBER); + RR(TIMING_H); + RR(TIMING_V); + RR(POL_FREQ); + RR(DIVISOR); + RR(GLOBAL_ALPHA); + RR(SIZE_DIG); + RR(SIZE_LCD); + + RR(GFX_BA0); + RR(GFX_BA1); + RR(GFX_POSITION); + RR(GFX_SIZE); + RR(GFX_ATTRIBUTES); + RR(GFX_FIFO_THRESHOLD); + RR(GFX_ROW_INC); + RR(GFX_PIXEL_INC); + RR(GFX_WINDOW_SKIP); + RR(GFX_TABLE_BA); + + RR(DATA_CYCLE1); + RR(DATA_CYCLE2); + RR(DATA_CYCLE3); + + RR(CPR_COEF_R); + RR(CPR_COEF_G); + RR(CPR_COEF_B); + + RR(GFX_PRELOAD); + + /* VID1 */ + RR(VID_BA0(0)); + RR(VID_BA1(0)); + RR(VID_POSITION(0)); + RR(VID_SIZE(0)); + RR(VID_ATTRIBUTES(0)); + RR(VID_FIFO_THRESHOLD(0)); + RR(VID_ROW_INC(0)); + RR(VID_PIXEL_INC(0)); + RR(VID_FIR(0)); + RR(VID_PICTURE_SIZE(0)); + RR(VID_ACCU0(0)); + RR(VID_ACCU1(0)); + + RR(VID_FIR_COEF_H(0, 0)); + RR(VID_FIR_COEF_H(0, 1)); + RR(VID_FIR_COEF_H(0, 2)); + RR(VID_FIR_COEF_H(0, 3)); + RR(VID_FIR_COEF_H(0, 4)); + RR(VID_FIR_COEF_H(0, 5)); + RR(VID_FIR_COEF_H(0, 6)); + RR(VID_FIR_COEF_H(0, 7)); + + RR(VID_FIR_COEF_HV(0, 0)); + RR(VID_FIR_COEF_HV(0, 1)); + RR(VID_FIR_COEF_HV(0, 2)); + RR(VID_FIR_COEF_HV(0, 3)); + RR(VID_FIR_COEF_HV(0, 4)); + RR(VID_FIR_COEF_HV(0, 5)); + RR(VID_FIR_COEF_HV(0, 6)); + RR(VID_FIR_COEF_HV(0, 7)); + + RR(VID_CONV_COEF(0, 0)); + RR(VID_CONV_COEF(0, 1)); + RR(VID_CONV_COEF(0, 2)); + RR(VID_CONV_COEF(0, 3)); + RR(VID_CONV_COEF(0, 4)); + + RR(VID_FIR_COEF_V(0, 0)); + RR(VID_FIR_COEF_V(0, 1)); + RR(VID_FIR_COEF_V(0, 2)); + RR(VID_FIR_COEF_V(0, 3)); + RR(VID_FIR_COEF_V(0, 4)); + RR(VID_FIR_COEF_V(0, 5)); + RR(VID_FIR_COEF_V(0, 6)); + RR(VID_FIR_COEF_V(0, 7)); + + RR(VID_PRELOAD(0)); + + /* VID2 */ + RR(VID_BA0(1)); + RR(VID_BA1(1)); + RR(VID_POSITION(1)); + RR(VID_SIZE(1)); + RR(VID_ATTRIBUTES(1)); + RR(VID_FIFO_THRESHOLD(1)); + RR(VID_ROW_INC(1)); + RR(VID_PIXEL_INC(1)); + RR(VID_FIR(1)); + RR(VID_PICTURE_SIZE(1)); + RR(VID_ACCU0(1)); + RR(VID_ACCU1(1)); + + RR(VID_FIR_COEF_H(1, 0)); + RR(VID_FIR_COEF_H(1, 1)); + RR(VID_FIR_COEF_H(1, 2)); + RR(VID_FIR_COEF_H(1, 3)); + RR(VID_FIR_COEF_H(1, 4)); + RR(VID_FIR_COEF_H(1, 5)); + RR(VID_FIR_COEF_H(1, 6)); + RR(VID_FIR_COEF_H(1, 7)); + + RR(VID_FIR_COEF_HV(1, 0)); + RR(VID_FIR_COEF_HV(1, 1)); + RR(VID_FIR_COEF_HV(1, 2)); + RR(VID_FIR_COEF_HV(1, 3)); + RR(VID_FIR_COEF_HV(1, 4)); + RR(VID_FIR_COEF_HV(1, 5)); + RR(VID_FIR_COEF_HV(1, 6)); + RR(VID_FIR_COEF_HV(1, 7)); + + RR(VID_CONV_COEF(1, 0)); + RR(VID_CONV_COEF(1, 1)); + RR(VID_CONV_COEF(1, 2)); + RR(VID_CONV_COEF(1, 3)); + RR(VID_CONV_COEF(1, 4)); + + RR(VID_FIR_COEF_V(1, 0)); + RR(VID_FIR_COEF_V(1, 1)); + RR(VID_FIR_COEF_V(1, 2)); + RR(VID_FIR_COEF_V(1, 3)); + RR(VID_FIR_COEF_V(1, 4)); + RR(VID_FIR_COEF_V(1, 5)); + RR(VID_FIR_COEF_V(1, 6)); + RR(VID_FIR_COEF_V(1, 7)); + + RR(VID_PRELOAD(1)); + + /* enable last, because LCD & DIGIT enable are here */ + RR(CONTROL); +} + +#undef SR +#undef RR + +static inline void enable_clocks(bool enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + else + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +bool dispc_go_busy(enum omap_channel channel) +{ + int bit; + + if (channel == OMAP_DSS_CHANNEL_LCD) + bit = 5; /* GOLCD */ + else + bit = 6; /* GODIGIT */ + + return REG_GET(DISPC_CONTROL, bit, bit) == 1; +} + +void dispc_go(enum omap_channel channel) +{ + int bit; + + enable_clocks(1); + + if (channel == OMAP_DSS_CHANNEL_LCD) + bit = 0; /* LCDENABLE */ + else + bit = 1; /* DIGITALENABLE */ + + /* if the channel is not enabled, we don't need GO */ + if (REG_GET(DISPC_CONTROL, bit, bit) == 0) + goto end; + + if (channel == OMAP_DSS_CHANNEL_LCD) + bit = 5; /* GOLCD */ + else + bit = 6; /* GODIGIT */ + + if (REG_GET(DISPC_CONTROL, bit, bit) == 1) { + DSSERR("GO bit not down for channel %d\n", channel); + goto end; + } + + DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); + + REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); +end: + enable_clocks(0); +} + +static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) +{ + BUG_ON(plane == OMAP_DSS_GFX); + + dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); +} + +static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) +{ + BUG_ON(plane == OMAP_DSS_GFX); + + dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); +} + +static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) +{ + BUG_ON(plane == OMAP_DSS_GFX); + + dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value); +} + +static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, + int vscaleup, int five_taps) +{ + /* Coefficients for horizontal up-sampling */ + static const u32 coef_hup[8] = { + 0x00800000, + 0x0D7CF800, + 0x1E70F5FF, + 0x335FF5FE, + 0xF74949F7, + 0xF55F33FB, + 0xF5701EFE, + 0xF87C0DFF, + }; + + /* Coefficients for horizontal down-sampling */ + static const u32 coef_hdown[8] = { + 0x24382400, + 0x28371FFE, + 0x2C361BFB, + 0x303516F9, + 0x11343311, + 0x1635300C, + 0x1B362C08, + 0x1F372804, + }; + + /* Coefficients for horizontal and vertical up-sampling */ + static const u32 coef_hvup[2][8] = { + { + 0x00800000, + 0x037B02FF, + 0x0C6F05FE, + 0x205907FB, + 0x00404000, + 0x075920FE, + 0x056F0CFF, + 0x027B0300, + }, + { + 0x00800000, + 0x0D7CF8FF, + 0x1E70F5FE, + 0x335FF5FB, + 0xF7404000, + 0xF55F33FE, + 0xF5701EFF, + 0xF87C0D00, + }, + }; + + /* Coefficients for horizontal and vertical down-sampling */ + static const u32 coef_hvdown[2][8] = { + { + 0x24382400, + 0x28391F04, + 0x2D381B08, + 0x3237170C, + 0x123737F7, + 0x173732F9, + 0x1B382DFB, + 0x1F3928FE, + }, + { + 0x24382400, + 0x28371F04, + 0x2C361B08, + 0x3035160C, + 0x113433F7, + 0x163530F9, + 0x1B362CFB, + 0x1F3728FE, + }, + }; + + /* Coefficients for vertical up-sampling */ + static const u32 coef_vup[8] = { + 0x00000000, + 0x0000FF00, + 0x0000FEFF, + 0x0000FBFE, + 0x000000F7, + 0x0000FEFB, + 0x0000FFFE, + 0x000000FF, + }; + + + /* Coefficients for vertical down-sampling */ + static const u32 coef_vdown[8] = { + 0x00000000, + 0x000004FE, + 0x000008FB, + 0x00000CF9, + 0x0000F711, + 0x0000F90C, + 0x0000FB08, + 0x0000FE04, + }; + + const u32 *h_coef; + const u32 *hv_coef; + const u32 *hv_coef_mod; + const u32 *v_coef; + int i; + + if (hscaleup) + h_coef = coef_hup; + else + h_coef = coef_hdown; + + if (vscaleup) { + hv_coef = coef_hvup[five_taps]; + v_coef = coef_vup; + + if (hscaleup) + hv_coef_mod = NULL; + else + hv_coef_mod = coef_hvdown[five_taps]; + } else { + hv_coef = coef_hvdown[five_taps]; + v_coef = coef_vdown; + + if (hscaleup) + hv_coef_mod = coef_hvup[five_taps]; + else + hv_coef_mod = NULL; + } + + for (i = 0; i < 8; i++) { + u32 h, hv; + + h = h_coef[i]; + + hv = hv_coef[i]; + + if (hv_coef_mod) { + hv &= 0xffffff00; + hv |= (hv_coef_mod[i] & 0xff); + } + + _dispc_write_firh_reg(plane, i, h); + _dispc_write_firhv_reg(plane, i, hv); + } + + if (!five_taps) + return; + + for (i = 0; i < 8; i++) { + u32 v; + v = v_coef[i]; + _dispc_write_firv_reg(plane, i, v); + } +} + +static void _dispc_setup_color_conv_coef(void) +{ + const struct color_conv_coef { + int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; + int full_range; + } ctbl_bt601_5 = { + 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, + }; + + const struct color_conv_coef *ct; + +#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) + + ct = &ctbl_bt601_5; + + dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); + dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); + dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); + dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); + dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); + + dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); + dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); + dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); + dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); + dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); + +#undef CVAL + + REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); + REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); +} + + +static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) +{ + const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, + DISPC_VID_BA0(0), + DISPC_VID_BA0(1) }; + + dispc_write_reg(ba0_reg[plane], paddr); +} + +static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) +{ + const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, + DISPC_VID_BA1(0), + DISPC_VID_BA1(1) }; + + dispc_write_reg(ba1_reg[plane], paddr); +} + +static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) +{ + const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, + DISPC_VID_POSITION(0), + DISPC_VID_POSITION(1) }; + + u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); + dispc_write_reg(pos_reg[plane], val); +} + +static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) +{ + const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, + DISPC_VID_PICTURE_SIZE(0), + DISPC_VID_PICTURE_SIZE(1) }; + u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); + dispc_write_reg(siz_reg[plane], val); +} + +static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) +{ + u32 val; + const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), + DISPC_VID_SIZE(1) }; + + BUG_ON(plane == OMAP_DSS_GFX); + + val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); + dispc_write_reg(vsi_reg[plane-1], val); +} + +static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha) +{ + + BUG_ON(plane == OMAP_DSS_VIDEO1); + + if (cpu_is_omap24xx()) + return; + + if (plane == OMAP_DSS_GFX) + REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0); + else if (plane == OMAP_DSS_VIDEO2) + REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16); +} + +static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) +{ + const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, + DISPC_VID_PIXEL_INC(0), + DISPC_VID_PIXEL_INC(1) }; + + dispc_write_reg(ri_reg[plane], inc); +} + +static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) +{ + const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, + DISPC_VID_ROW_INC(0), + DISPC_VID_ROW_INC(1) }; + + dispc_write_reg(ri_reg[plane], inc); +} + +static void _dispc_set_color_mode(enum omap_plane plane, + enum omap_color_mode color_mode) +{ + u32 m = 0; + + switch (color_mode) { + case OMAP_DSS_COLOR_CLUT1: + m = 0x0; break; + case OMAP_DSS_COLOR_CLUT2: + m = 0x1; break; + case OMAP_DSS_COLOR_CLUT4: + m = 0x2; break; + case OMAP_DSS_COLOR_CLUT8: + m = 0x3; break; + case OMAP_DSS_COLOR_RGB12U: + m = 0x4; break; + case OMAP_DSS_COLOR_ARGB16: + m = 0x5; break; + case OMAP_DSS_COLOR_RGB16: + m = 0x6; break; + case OMAP_DSS_COLOR_RGB24U: + m = 0x8; break; + case OMAP_DSS_COLOR_RGB24P: + m = 0x9; break; + case OMAP_DSS_COLOR_YUV2: + m = 0xa; break; + case OMAP_DSS_COLOR_UYVY: + m = 0xb; break; + case OMAP_DSS_COLOR_ARGB32: + m = 0xc; break; + case OMAP_DSS_COLOR_RGBA32: + m = 0xd; break; + case OMAP_DSS_COLOR_RGBX32: + m = 0xe; break; + default: + BUG(); break; + } + + REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); +} + +static void _dispc_set_channel_out(enum omap_plane plane, + enum omap_channel channel) +{ + int shift; + u32 val; + + switch (plane) { + case OMAP_DSS_GFX: + shift = 8; + break; + case OMAP_DSS_VIDEO1: + case OMAP_DSS_VIDEO2: + shift = 16; + break; + default: + BUG(); + return; + } + + val = dispc_read_reg(dispc_reg_att[plane]); + val = FLD_MOD(val, channel, shift, shift); + dispc_write_reg(dispc_reg_att[plane], val); +} + +void dispc_set_burst_size(enum omap_plane plane, + enum omap_burst_size burst_size) +{ + int shift; + u32 val; + + enable_clocks(1); + + switch (plane) { + case OMAP_DSS_GFX: + shift = 6; + break; + case OMAP_DSS_VIDEO1: + case OMAP_DSS_VIDEO2: + shift = 14; + break; + default: + BUG(); + return; + } + + val = dispc_read_reg(dispc_reg_att[plane]); + val = FLD_MOD(val, burst_size, shift+1, shift); + dispc_write_reg(dispc_reg_att[plane], val); + + enable_clocks(0); +} + +static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) +{ + u32 val; + + BUG_ON(plane == OMAP_DSS_GFX); + + val = dispc_read_reg(dispc_reg_att[plane]); + val = FLD_MOD(val, enable, 9, 9); + dispc_write_reg(dispc_reg_att[plane], val); +} + +void dispc_enable_replication(enum omap_plane plane, bool enable) +{ + int bit; + + if (plane == OMAP_DSS_GFX) + bit = 5; + else + bit = 10; + + enable_clocks(1); + REG_FLD_MOD(dispc_reg_att[plane], enable, bit, bit); + enable_clocks(0); +} + +void dispc_set_lcd_size(u16 width, u16 height) +{ + u32 val; + BUG_ON((width > (1 << 11)) || (height > (1 << 11))); + val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); + enable_clocks(1); + dispc_write_reg(DISPC_SIZE_LCD, val); + enable_clocks(0); +} + +void dispc_set_digit_size(u16 width, u16 height) +{ + u32 val; + BUG_ON((width > (1 << 11)) || (height > (1 << 11))); + val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); + enable_clocks(1); + dispc_write_reg(DISPC_SIZE_DIG, val); + enable_clocks(0); +} + +static void dispc_read_plane_fifo_sizes(void) +{ + const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, + DISPC_VID_FIFO_SIZE_STATUS(0), + DISPC_VID_FIFO_SIZE_STATUS(1) }; + u32 size; + int plane; + + enable_clocks(1); + + for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) { + if (cpu_is_omap24xx()) + size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); + else if (cpu_is_omap34xx()) + size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); + else + BUG(); + + dispc.fifo_size[plane] = size; + } + + enable_clocks(0); +} + +u32 dispc_get_plane_fifo_size(enum omap_plane plane) +{ + return dispc.fifo_size[plane]; +} + +void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) +{ + const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, + DISPC_VID_FIFO_THRESHOLD(0), + DISPC_VID_FIFO_THRESHOLD(1) }; + enable_clocks(1); + + DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n", + plane, + REG_GET(ftrs_reg[plane], 11, 0), + REG_GET(ftrs_reg[plane], 27, 16), + low, high); + + if (cpu_is_omap24xx()) + dispc_write_reg(ftrs_reg[plane], + FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); + else + dispc_write_reg(ftrs_reg[plane], + FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); + + enable_clocks(0); +} + +void dispc_enable_fifomerge(bool enable) +{ + enable_clocks(1); + + DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); + REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); + + enable_clocks(0); +} + +static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) +{ + u32 val; + const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), + DISPC_VID_FIR(1) }; + + BUG_ON(plane == OMAP_DSS_GFX); + + if (cpu_is_omap24xx()) + val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); + else + val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); + dispc_write_reg(fir_reg[plane-1], val); +} + +static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) +{ + u32 val; + const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), + DISPC_VID_ACCU0(1) }; + + BUG_ON(plane == OMAP_DSS_GFX); + + val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); + dispc_write_reg(ac0_reg[plane-1], val); +} + +static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) +{ + u32 val; + const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), + DISPC_VID_ACCU1(1) }; + + BUG_ON(plane == OMAP_DSS_GFX); + + val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); + dispc_write_reg(ac1_reg[plane-1], val); +} + + +static void _dispc_set_scaling(enum omap_plane plane, + u16 orig_width, u16 orig_height, + u16 out_width, u16 out_height, + bool ilace, bool five_taps, + bool fieldmode) +{ + int fir_hinc; + int fir_vinc; + int hscaleup, vscaleup; + int accu0 = 0; + int accu1 = 0; + u32 l; + + BUG_ON(plane == OMAP_DSS_GFX); + + hscaleup = orig_width <= out_width; + vscaleup = orig_height <= out_height; + + _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); + + if (!orig_width || orig_width == out_width) + fir_hinc = 0; + else + fir_hinc = 1024 * orig_width / out_width; + + if (!orig_height || orig_height == out_height) + fir_vinc = 0; + else + fir_vinc = 1024 * orig_height / out_height; + + _dispc_set_fir(plane, fir_hinc, fir_vinc); + + l = dispc_read_reg(dispc_reg_att[plane]); + l &= ~((0x0f << 5) | (0x3 << 21)); + + l |= fir_hinc ? (1 << 5) : 0; + l |= fir_vinc ? (1 << 6) : 0; + + l |= hscaleup ? 0 : (1 << 7); + l |= vscaleup ? 0 : (1 << 8); + + l |= five_taps ? (1 << 21) : 0; + l |= five_taps ? (1 << 22) : 0; + + dispc_write_reg(dispc_reg_att[plane], l); + + /* + * field 0 = even field = bottom field + * field 1 = odd field = top field + */ + if (ilace && !fieldmode) { + accu1 = 0; + accu0 = (fir_vinc / 2) & 0x3ff; + if (accu0 >= 1024/2) { + accu1 = 1024/2; + accu0 -= accu1; + } + } + + _dispc_set_vid_accu0(plane, 0, accu0); + _dispc_set_vid_accu1(plane, 0, accu1); +} + +static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, + bool mirroring, enum omap_color_mode color_mode) +{ + if (color_mode == OMAP_DSS_COLOR_YUV2 || + color_mode == OMAP_DSS_COLOR_UYVY) { + int vidrot = 0; + + if (mirroring) { + switch (rotation) { + case OMAP_DSS_ROT_0: + vidrot = 2; + break; + case OMAP_DSS_ROT_90: + vidrot = 1; + break; + case OMAP_DSS_ROT_180: + vidrot = 0; + break; + case OMAP_DSS_ROT_270: + vidrot = 3; + break; + } + } else { + switch (rotation) { + case OMAP_DSS_ROT_0: + vidrot = 0; + break; + case OMAP_DSS_ROT_90: + vidrot = 1; + break; + case OMAP_DSS_ROT_180: + vidrot = 2; + break; + case OMAP_DSS_ROT_270: + vidrot = 3; + break; + } + } + + REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12); + + if (rotation == OMAP_DSS_ROT_90 || rotation == OMAP_DSS_ROT_270) + REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18); + else + REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18); + } else { + REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12); + REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18); + } +} + +static int color_mode_to_bpp(enum omap_color_mode color_mode) +{ + switch (color_mode) { + case OMAP_DSS_COLOR_CLUT1: + return 1; + case OMAP_DSS_COLOR_CLUT2: + return 2; + case OMAP_DSS_COLOR_CLUT4: + return 4; + case OMAP_DSS_COLOR_CLUT8: + return 8; + case OMAP_DSS_COLOR_RGB12U: + case OMAP_DSS_COLOR_RGB16: + case OMAP_DSS_COLOR_ARGB16: + case OMAP_DSS_COLOR_YUV2: + case OMAP_DSS_COLOR_UYVY: + return 16; + case OMAP_DSS_COLOR_RGB24P: + return 24; + case OMAP_DSS_COLOR_RGB24U: + case OMAP_DSS_COLOR_ARGB32: + case OMAP_DSS_COLOR_RGBA32: + case OMAP_DSS_COLOR_RGBX32: + return 32; + default: + BUG(); + } +} + +static s32 pixinc(int pixels, u8 ps) +{ + if (pixels == 1) + return 1; + else if (pixels > 1) + return 1 + (pixels - 1) * ps; + else if (pixels < 0) + return 1 - (-pixels + 1) * ps; + else + BUG(); +} + +static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, + u16 screen_width, + u16 width, u16 height, + enum omap_color_mode color_mode, bool fieldmode, + unsigned int field_offset, + unsigned *offset0, unsigned *offset1, + s32 *row_inc, s32 *pix_inc) +{ + u8 ps; + + /* FIXME CLUT formats */ + switch (color_mode) { + case OMAP_DSS_COLOR_CLUT1: + case OMAP_DSS_COLOR_CLUT2: + case OMAP_DSS_COLOR_CLUT4: + case OMAP_DSS_COLOR_CLUT8: + BUG(); + return; + case OMAP_DSS_COLOR_YUV2: + case OMAP_DSS_COLOR_UYVY: + ps = 4; + break; + default: + ps = color_mode_to_bpp(color_mode) / 8; + break; + } + + DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, + width, height); + + /* + * field 0 = even field = bottom field + * field 1 = odd field = top field + */ + switch (rotation + mirror * 4) { + case OMAP_DSS_ROT_0: + case OMAP_DSS_ROT_180: + /* + * If the pixel format is YUV or UYVY divide the width + * of the image by 2 for 0 and 180 degree rotation. + */ + if (color_mode == OMAP_DSS_COLOR_YUV2 || + color_mode == OMAP_DSS_COLOR_UYVY) + width = width >> 1; + case OMAP_DSS_ROT_90: + case OMAP_DSS_ROT_270: + *offset1 = 0; + if (field_offset) + *offset0 = field_offset * screen_width * ps; + else + *offset0 = 0; + + *row_inc = pixinc(1 + (screen_width - width) + + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(1, ps); + break; + + case OMAP_DSS_ROT_0 + 4: + case OMAP_DSS_ROT_180 + 4: + /* If the pixel format is YUV or UYVY divide the width + * of the image by 2 for 0 degree and 180 degree + */ + if (color_mode == OMAP_DSS_COLOR_YUV2 || + color_mode == OMAP_DSS_COLOR_UYVY) + width = width >> 1; + case OMAP_DSS_ROT_90 + 4: + case OMAP_DSS_ROT_270 + 4: + *offset1 = 0; + if (field_offset) + *offset0 = field_offset * screen_width * ps; + else + *offset0 = 0; + *row_inc = pixinc(1 - (screen_width + width) - + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(1, ps); + break; + + default: + BUG(); + } +} + +static void calc_dma_rotation_offset(u8 rotation, bool mirror, + u16 screen_width, + u16 width, u16 height, + enum omap_color_mode color_mode, bool fieldmode, + unsigned int field_offset, + unsigned *offset0, unsigned *offset1, + s32 *row_inc, s32 *pix_inc) +{ + u8 ps; + u16 fbw, fbh; + + /* FIXME CLUT formats */ + switch (color_mode) { + case OMAP_DSS_COLOR_CLUT1: + case OMAP_DSS_COLOR_CLUT2: + case OMAP_DSS_COLOR_CLUT4: + case OMAP_DSS_COLOR_CLUT8: + BUG(); + return; + default: + ps = color_mode_to_bpp(color_mode) / 8; + break; + } + + DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, + width, height); + + /* width & height are overlay sizes, convert to fb sizes */ + + if (rotation == OMAP_DSS_ROT_0 || rotation == OMAP_DSS_ROT_180) { + fbw = width; + fbh = height; + } else { + fbw = height; + fbh = width; + } + + /* + * field 0 = even field = bottom field + * field 1 = odd field = top field + */ + switch (rotation + mirror * 4) { + case OMAP_DSS_ROT_0: + *offset1 = 0; + if (field_offset) + *offset0 = *offset1 + field_offset * screen_width * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(1 + (screen_width - fbw) + + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(1, ps); + break; + case OMAP_DSS_ROT_90: + *offset1 = screen_width * (fbh - 1) * ps; + if (field_offset) + *offset0 = *offset1 + field_offset * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(screen_width * (fbh - 1) + 1 + + (fieldmode ? 1 : 0), ps); + *pix_inc = pixinc(-screen_width, ps); + break; + case OMAP_DSS_ROT_180: + *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; + if (field_offset) + *offset0 = *offset1 - field_offset * screen_width * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(-1 - + (screen_width - fbw) - + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(-1, ps); + break; + case OMAP_DSS_ROT_270: + *offset1 = (fbw - 1) * ps; + if (field_offset) + *offset0 = *offset1 - field_offset * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - + (fieldmode ? 1 : 0), ps); + *pix_inc = pixinc(screen_width, ps); + break; + + /* mirroring */ + case OMAP_DSS_ROT_0 + 4: + *offset1 = (fbw - 1) * ps; + if (field_offset) + *offset0 = *offset1 + field_offset * screen_width * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(screen_width * 2 - 1 + + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(-1, ps); + break; + + case OMAP_DSS_ROT_90 + 4: + *offset1 = 0; + if (field_offset) + *offset0 = *offset1 + field_offset * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + + (fieldmode ? 1 : 0), + ps); + *pix_inc = pixinc(screen_width, ps); + break; + + case OMAP_DSS_ROT_180 + 4: + *offset1 = screen_width * (fbh - 1) * ps; + if (field_offset) + *offset0 = *offset1 - field_offset * screen_width * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(1 - screen_width * 2 - + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(1, ps); + break; + + case OMAP_DSS_ROT_270 + 4: + *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; + if (field_offset) + *offset0 = *offset1 - field_offset * ps; + else + *offset0 = *offset1; + *row_inc = pixinc(screen_width * (fbh - 1) - 1 - + (fieldmode ? 1 : 0), + ps); + *pix_inc = pixinc(-screen_width, ps); + break; + + default: + BUG(); + } +} + +static unsigned long calc_fclk_five_taps(u16 width, u16 height, + u16 out_width, u16 out_height, enum omap_color_mode color_mode) +{ + u32 fclk = 0; + /* FIXME venc pclk? */ + u64 tmp, pclk = dispc_pclk_rate(); + + if (height > out_height) { + /* FIXME get real display PPL */ + unsigned int ppl = 800; + + tmp = pclk * height * out_width; + do_div(tmp, 2 * out_height * ppl); + fclk = tmp; + + if (height > 2 * out_height && ppl != out_width) { + tmp = pclk * (height - 2 * out_height) * out_width; + do_div(tmp, 2 * out_height * (ppl - out_width)); + fclk = max(fclk, (u32) tmp); + } + } + + if (width > out_width) { + tmp = pclk * width; + do_div(tmp, out_width); + fclk = max(fclk, (u32) tmp); + + if (color_mode == OMAP_DSS_COLOR_RGB24U) + fclk <<= 1; + } + + return fclk; +} + +static unsigned long calc_fclk(u16 width, u16 height, + u16 out_width, u16 out_height) +{ + unsigned int hf, vf; + + /* + * FIXME how to determine the 'A' factor + * for the no downscaling case ? + */ + + if (width > 3 * out_width) + hf = 4; + else if (width > 2 * out_width) + hf = 3; + else if (width > out_width) + hf = 2; + else + hf = 1; + + if (height > out_height) + vf = 2; + else + vf = 1; + + /* FIXME venc pclk? */ + return dispc_pclk_rate() * vf * hf; +} + +void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out) +{ + enable_clocks(1); + _dispc_set_channel_out(plane, channel_out); + enable_clocks(0); +} + +static int _dispc_setup_plane(enum omap_plane plane, + u32 paddr, u16 screen_width, + u16 pos_x, u16 pos_y, + u16 width, u16 height, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, + enum omap_dss_rotation_type rotation_type, + u8 rotation, int mirror, + u8 global_alpha) +{ + const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; + bool five_taps = 0; + bool fieldmode = 0; + int cconv = 0; + unsigned offset0, offset1; + s32 row_inc; + s32 pix_inc; + u16 frame_height = height; + unsigned int field_offset = 0; + + if (paddr == 0) + return -EINVAL; + + if (ilace && height == out_height) + fieldmode = 1; + + if (ilace) { + if (fieldmode) + height /= 2; + pos_y /= 2; + out_height /= 2; + + DSSDBG("adjusting for ilace: height %d, pos_y %d, " + "out_height %d\n", + height, pos_y, out_height); + } + + if (plane == OMAP_DSS_GFX) { + if (width != out_width || height != out_height) + return -EINVAL; + + switch (color_mode) { + case OMAP_DSS_COLOR_ARGB16: + case OMAP_DSS_COLOR_ARGB32: + case OMAP_DSS_COLOR_RGBA32: + case OMAP_DSS_COLOR_RGBX32: + if (cpu_is_omap24xx()) + return -EINVAL; + /* fall through */ + case OMAP_DSS_COLOR_RGB12U: + case OMAP_DSS_COLOR_RGB16: + case OMAP_DSS_COLOR_RGB24P: + case OMAP_DSS_COLOR_RGB24U: + break; + + default: + return -EINVAL; + } + } else { + /* video plane */ + + unsigned long fclk = 0; + + if (out_width < width / maxdownscale || + out_width > width * 8) + return -EINVAL; + + if (out_height < height / maxdownscale || + out_height > height * 8) + return -EINVAL; + + switch (color_mode) { + case OMAP_DSS_COLOR_RGBX32: + case OMAP_DSS_COLOR_RGB12U: + if (cpu_is_omap24xx()) + return -EINVAL; + /* fall through */ + case OMAP_DSS_COLOR_RGB16: + case OMAP_DSS_COLOR_RGB24P: + case OMAP_DSS_COLOR_RGB24U: + break; + + case OMAP_DSS_COLOR_ARGB16: + case OMAP_DSS_COLOR_ARGB32: + case OMAP_DSS_COLOR_RGBA32: + if (cpu_is_omap24xx()) + return -EINVAL; + if (plane == OMAP_DSS_VIDEO1) + return -EINVAL; + break; + + case OMAP_DSS_COLOR_YUV2: + case OMAP_DSS_COLOR_UYVY: + cconv = 1; + break; + + default: + return -EINVAL; + } + + /* Must use 5-tap filter? */ + five_taps = height > out_height * 2; + + if (!five_taps) { + fclk = calc_fclk(width, height, + out_width, out_height); + + /* Try 5-tap filter if 3-tap fclk is too high */ + if (cpu_is_omap34xx() && height > out_height && + fclk > dispc_fclk_rate()) + five_taps = true; + } + + if (width > (2048 >> five_taps)) { + DSSERR("failed to set up scaling, fclk too low\n"); + return -EINVAL; + } + + if (five_taps) + fclk = calc_fclk_five_taps(width, height, + out_width, out_height, color_mode); + + DSSDBG("required fclk rate = %lu Hz\n", fclk); + DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); + + if (fclk > dispc_fclk_rate()) { + DSSERR("failed to set up scaling, " + "required fclk rate = %lu Hz, " + "current fclk rate = %lu Hz\n", + fclk, dispc_fclk_rate()); + return -EINVAL; + } + } + + if (ilace && !fieldmode) { + /* + * when downscaling the bottom field may have to start several + * source lines below the top field. Unfortunately ACCUI + * registers will only hold the fractional part of the offset + * so the integer part must be added to the base address of the + * bottom field. + */ + if (!height || height == out_height) + field_offset = 0; + else + field_offset = height / out_height / 2; + } + + /* Fields are independent but interleaved in memory. */ + if (fieldmode) + field_offset = 1; + + if (rotation_type == OMAP_DSS_ROT_DMA) + calc_dma_rotation_offset(rotation, mirror, + screen_width, width, frame_height, color_mode, + fieldmode, field_offset, + &offset0, &offset1, &row_inc, &pix_inc); + else + calc_vrfb_rotation_offset(rotation, mirror, + screen_width, width, frame_height, color_mode, + fieldmode, field_offset, + &offset0, &offset1, &row_inc, &pix_inc); + + DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", + offset0, offset1, row_inc, pix_inc); + + _dispc_set_color_mode(plane, color_mode); + + _dispc_set_plane_ba0(plane, paddr + offset0); + _dispc_set_plane_ba1(plane, paddr + offset1); + + _dispc_set_row_inc(plane, row_inc); + _dispc_set_pix_inc(plane, pix_inc); + + DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height, + out_width, out_height); + + _dispc_set_plane_pos(plane, pos_x, pos_y); + + _dispc_set_pic_size(plane, width, height); + + if (plane != OMAP_DSS_GFX) { + _dispc_set_scaling(plane, width, height, + out_width, out_height, + ilace, five_taps, fieldmode); + _dispc_set_vid_size(plane, out_width, out_height); + _dispc_set_vid_color_conv(plane, cconv); + } + + _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode); + + if (plane != OMAP_DSS_VIDEO1) + _dispc_setup_global_alpha(plane, global_alpha); + + return 0; +} + +static void _dispc_enable_plane(enum omap_plane plane, bool enable) +{ + REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); +} + +static void dispc_disable_isr(void *data, u32 mask) +{ + struct completion *compl = data; + complete(compl); +} + +static void _enable_lcd_out(bool enable) +{ + REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); +} + +void dispc_enable_lcd_out(bool enable) +{ + struct completion frame_done_completion; + bool is_on; + int r; + + enable_clocks(1); + + /* When we disable LCD output, we need to wait until frame is done. + * Otherwise the DSS is still working, and turning off the clocks + * prevents DSS from going to OFF mode */ + is_on = REG_GET(DISPC_CONTROL, 0, 0); + + if (!enable && is_on) { + init_completion(&frame_done_completion); + + r = omap_dispc_register_isr(dispc_disable_isr, + &frame_done_completion, + DISPC_IRQ_FRAMEDONE); + + if (r) + DSSERR("failed to register FRAMEDONE isr\n"); + } + + _enable_lcd_out(enable); + + if (!enable && is_on) { + if (!wait_for_completion_timeout(&frame_done_completion, + msecs_to_jiffies(100))) + DSSERR("timeout waiting for FRAME DONE\n"); + + r = omap_dispc_unregister_isr(dispc_disable_isr, + &frame_done_completion, + DISPC_IRQ_FRAMEDONE); + + if (r) + DSSERR("failed to unregister FRAMEDONE isr\n"); + } + + enable_clocks(0); +} + +static void _enable_digit_out(bool enable) +{ + REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); +} + +void dispc_enable_digit_out(bool enable) +{ + struct completion frame_done_completion; + int r; + + enable_clocks(1); + + if (REG_GET(DISPC_CONTROL, 1, 1) == enable) { + enable_clocks(0); + return; + } + + if (enable) { + unsigned long flags; + /* When we enable digit output, we'll get an extra digit + * sync lost interrupt, that we need to ignore */ + spin_lock_irqsave(&dispc.irq_lock, flags); + dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; + _omap_dispc_set_irqs(); + spin_unlock_irqrestore(&dispc.irq_lock, flags); + } + + /* When we disable digit output, we need to wait until fields are done. + * Otherwise the DSS is still working, and turning off the clocks + * prevents DSS from going to OFF mode. And when enabling, we need to + * wait for the extra sync losts */ + init_completion(&frame_done_completion); + + r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, + DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); + if (r) + DSSERR("failed to register EVSYNC isr\n"); + + _enable_digit_out(enable); + + /* XXX I understand from TRM that we should only wait for the + * current field to complete. But it seems we have to wait + * for both fields */ + if (!wait_for_completion_timeout(&frame_done_completion, + msecs_to_jiffies(100))) + DSSERR("timeout waiting for EVSYNC\n"); + + if (!wait_for_completion_timeout(&frame_done_completion, + msecs_to_jiffies(100))) + DSSERR("timeout waiting for EVSYNC\n"); + + r = omap_dispc_unregister_isr(dispc_disable_isr, + &frame_done_completion, + DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); + if (r) + DSSERR("failed to unregister EVSYNC isr\n"); + + if (enable) { + unsigned long flags; + spin_lock_irqsave(&dispc.irq_lock, flags); + dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; + dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); + _omap_dispc_set_irqs(); + spin_unlock_irqrestore(&dispc.irq_lock, flags); + } + + enable_clocks(0); +} + +void dispc_lcd_enable_signal_polarity(bool act_high) +{ + enable_clocks(1); + REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); + enable_clocks(0); +} + +void dispc_lcd_enable_signal(bool enable) +{ + enable_clocks(1); + REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); + enable_clocks(0); +} + +void dispc_pck_free_enable(bool enable) +{ + enable_clocks(1); + REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); + enable_clocks(0); +} + +void dispc_enable_fifohandcheck(bool enable) +{ + enable_clocks(1); + REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); + enable_clocks(0); +} + + +void dispc_set_lcd_display_type(enum omap_lcd_display_type type) +{ + int mode; + + switch (type) { + case OMAP_DSS_LCD_DISPLAY_STN: + mode = 0; + break; + + case OMAP_DSS_LCD_DISPLAY_TFT: + mode = 1; + break; + + default: + BUG(); + return; + } + + enable_clocks(1); + REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); + enable_clocks(0); +} + +void dispc_set_loadmode(enum omap_dss_load_mode mode) +{ + enable_clocks(1); + REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); + enable_clocks(0); +} + + +void dispc_set_default_color(enum omap_channel channel, u32 color) +{ + const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, + DISPC_DEFAULT_COLOR1 }; + + enable_clocks(1); + dispc_write_reg(def_reg[channel], color); + enable_clocks(0); +} + +u32 dispc_get_default_color(enum omap_channel channel) +{ + const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, + DISPC_DEFAULT_COLOR1 }; + u32 l; + + BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && + channel != OMAP_DSS_CHANNEL_LCD); + + enable_clocks(1); + l = dispc_read_reg(def_reg[channel]); + enable_clocks(0); + + return l; +} + +void dispc_set_trans_key(enum omap_channel ch, + enum omap_dss_trans_key_type type, + u32 trans_key) +{ + const struct dispc_reg tr_reg[] = { + DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; + + enable_clocks(1); + if (ch == OMAP_DSS_CHANNEL_LCD) + REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); + else /* OMAP_DSS_CHANNEL_DIGIT */ + REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); + + dispc_write_reg(tr_reg[ch], trans_key); + enable_clocks(0); +} + +void dispc_get_trans_key(enum omap_channel ch, + enum omap_dss_trans_key_type *type, + u32 *trans_key) +{ + const struct dispc_reg tr_reg[] = { + DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; + + enable_clocks(1); + if (type) { + if (ch == OMAP_DSS_CHANNEL_LCD) + *type = REG_GET(DISPC_CONFIG, 11, 11); + else if (ch == OMAP_DSS_CHANNEL_DIGIT) + *type = REG_GET(DISPC_CONFIG, 13, 13); + else + BUG(); + } + + if (trans_key) + *trans_key = dispc_read_reg(tr_reg[ch]); + enable_clocks(0); +} + +void dispc_enable_trans_key(enum omap_channel ch, bool enable) +{ + enable_clocks(1); + if (ch == OMAP_DSS_CHANNEL_LCD) + REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); + else /* OMAP_DSS_CHANNEL_DIGIT */ + REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); + enable_clocks(0); +} +void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) +{ + if (cpu_is_omap24xx()) + return; + + enable_clocks(1); + if (ch == OMAP_DSS_CHANNEL_LCD) + REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); + else /* OMAP_DSS_CHANNEL_DIGIT */ + REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); + enable_clocks(0); +} +bool dispc_alpha_blending_enabled(enum omap_channel ch) +{ + bool enabled; + + if (cpu_is_omap24xx()) + return false; + + enable_clocks(1); + if (ch == OMAP_DSS_CHANNEL_LCD) + enabled = REG_GET(DISPC_CONFIG, 18, 18); + else if (ch == OMAP_DSS_CHANNEL_DIGIT) + enabled = REG_GET(DISPC_CONFIG, 18, 18); + else + BUG(); + enable_clocks(0); + + return enabled; + +} + + +bool dispc_trans_key_enabled(enum omap_channel ch) +{ + bool enabled; + + enable_clocks(1); + if (ch == OMAP_DSS_CHANNEL_LCD) + enabled = REG_GET(DISPC_CONFIG, 10, 10); + else if (ch == OMAP_DSS_CHANNEL_DIGIT) + enabled = REG_GET(DISPC_CONFIG, 12, 12); + else + BUG(); + enable_clocks(0); + + return enabled; +} + + +void dispc_set_tft_data_lines(u8 data_lines) +{ + int code; + + switch (data_lines) { + case 12: + code = 0; + break; + case 16: + code = 1; + break; + case 18: + code = 2; + break; + case 24: + code = 3; + break; + default: + BUG(); + return; + } + + enable_clocks(1); + REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); + enable_clocks(0); +} + +void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) +{ + u32 l; + int stallmode; + int gpout0 = 1; + int gpout1; + + switch (mode) { + case OMAP_DSS_PARALLELMODE_BYPASS: + stallmode = 0; + gpout1 = 1; + break; + + case OMAP_DSS_PARALLELMODE_RFBI: + stallmode = 1; + gpout1 = 0; + break; + + case OMAP_DSS_PARALLELMODE_DSI: + stallmode = 1; + gpout1 = 1; + break; + + default: + BUG(); + return; + } + + enable_clocks(1); + + l = dispc_read_reg(DISPC_CONTROL); + + l = FLD_MOD(l, stallmode, 11, 11); + l = FLD_MOD(l, gpout0, 15, 15); + l = FLD_MOD(l, gpout1, 16, 16); + + dispc_write_reg(DISPC_CONTROL, l); + + enable_clocks(0); +} + +static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp, + int vsw, int vfp, int vbp) +{ + if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { + if (hsw < 1 || hsw > 64 || + hfp < 1 || hfp > 256 || + hbp < 1 || hbp > 256 || + vsw < 1 || vsw > 64 || + vfp < 0 || vfp > 255 || + vbp < 0 || vbp > 255) + return false; + } else { + if (hsw < 1 || hsw > 256 || + hfp < 1 || hfp > 4096 || + hbp < 1 || hbp > 4096 || + vsw < 1 || vsw > 256 || + vfp < 0 || vfp > 4095 || + vbp < 0 || vbp > 4095) + return false; + } + + return true; +} + +bool dispc_lcd_timings_ok(struct omap_video_timings *timings) +{ + return _dispc_lcd_timings_ok(timings->hsw, timings->hfp, + timings->hbp, timings->vsw, + timings->vfp, timings->vbp); +} + +static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, + int vsw, int vfp, int vbp) +{ + u32 timing_h, timing_v; + + if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { + timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | + FLD_VAL(hbp-1, 27, 20); + + timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | + FLD_VAL(vbp, 27, 20); + } else { + timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | + FLD_VAL(hbp-1, 31, 20); + + timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | + FLD_VAL(vbp, 31, 20); + } + + enable_clocks(1); + dispc_write_reg(DISPC_TIMING_H, timing_h); + dispc_write_reg(DISPC_TIMING_V, timing_v); + enable_clocks(0); +} + +/* change name to mode? */ +void dispc_set_lcd_timings(struct omap_video_timings *timings) +{ + unsigned xtot, ytot; + unsigned long ht, vt; + + if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp, + timings->hbp, timings->vsw, + timings->vfp, timings->vbp)) + BUG(); + + _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, + timings->vsw, timings->vfp, timings->vbp); + + dispc_set_lcd_size(timings->x_res, timings->y_res); + + xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; + ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; + + ht = (timings->pixel_clock * 1000) / xtot; + vt = (timings->pixel_clock * 1000) / xtot / ytot; + + DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); + DSSDBG("pck %u\n", timings->pixel_clock); + DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", + timings->hsw, timings->hfp, timings->hbp, + timings->vsw, timings->vfp, timings->vbp); + + DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); +} + +static void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div) +{ + BUG_ON(lck_div < 1); + BUG_ON(pck_div < 2); + + enable_clocks(1); + dispc_write_reg(DISPC_DIVISOR, + FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); + enable_clocks(0); +} + +static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) +{ + u32 l; + l = dispc_read_reg(DISPC_DIVISOR); + *lck_div = FLD_GET(l, 23, 16); + *pck_div = FLD_GET(l, 7, 0); +} + +unsigned long dispc_fclk_rate(void) +{ + unsigned long r = 0; + + if (dss_get_dispc_clk_source() == 0) + r = dss_clk_get_rate(DSS_CLK_FCK1); + else +#ifdef CONFIG_OMAP2_DSS_DSI + r = dsi_get_dsi1_pll_rate(); +#else + BUG(); +#endif + return r; +} + +unsigned long dispc_lclk_rate(void) +{ + int lcd; + unsigned long r; + u32 l; + + l = dispc_read_reg(DISPC_DIVISOR); + + lcd = FLD_GET(l, 23, 16); + + r = dispc_fclk_rate(); + + return r / lcd; +} + +unsigned long dispc_pclk_rate(void) +{ + int lcd, pcd; + unsigned long r; + u32 l; + + l = dispc_read_reg(DISPC_DIVISOR); + + lcd = FLD_GET(l, 23, 16); + pcd = FLD_GET(l, 7, 0); + + r = dispc_fclk_rate(); + + return r / lcd / pcd; +} + +void dispc_dump_clocks(struct seq_file *s) +{ + int lcd, pcd; + + enable_clocks(1); + + dispc_get_lcd_divisor(&lcd, &pcd); + + seq_printf(s, "- DISPC -\n"); + + seq_printf(s, "dispc fclk source = %s\n", + dss_get_dispc_clk_source() == 0 ? + "dss1_alwon_fclk" : "dsi1_pll_fclk"); + + seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate()); + seq_printf(s, "lck\t\t%-16lulck div\t%u\n", dispc_lclk_rate(), lcd); + seq_printf(s, "pck\t\t%-16lupck div\t%u\n", dispc_pclk_rate(), pcd); + + enable_clocks(0); +} + +void dispc_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + DUMPREG(DISPC_REVISION); + DUMPREG(DISPC_SYSCONFIG); + DUMPREG(DISPC_SYSSTATUS); + DUMPREG(DISPC_IRQSTATUS); + DUMPREG(DISPC_IRQENABLE); + DUMPREG(DISPC_CONTROL); + DUMPREG(DISPC_CONFIG); + DUMPREG(DISPC_CAPABLE); + DUMPREG(DISPC_DEFAULT_COLOR0); + DUMPREG(DISPC_DEFAULT_COLOR1); + DUMPREG(DISPC_TRANS_COLOR0); + DUMPREG(DISPC_TRANS_COLOR1); + DUMPREG(DISPC_LINE_STATUS); + DUMPREG(DISPC_LINE_NUMBER); + DUMPREG(DISPC_TIMING_H); + DUMPREG(DISPC_TIMING_V); + DUMPREG(DISPC_POL_FREQ); + DUMPREG(DISPC_DIVISOR); + DUMPREG(DISPC_GLOBAL_ALPHA); + DUMPREG(DISPC_SIZE_DIG); + DUMPREG(DISPC_SIZE_LCD); + + DUMPREG(DISPC_GFX_BA0); + DUMPREG(DISPC_GFX_BA1); + DUMPREG(DISPC_GFX_POSITION); + DUMPREG(DISPC_GFX_SIZE); + DUMPREG(DISPC_GFX_ATTRIBUTES); + DUMPREG(DISPC_GFX_FIFO_THRESHOLD); + DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS); + DUMPREG(DISPC_GFX_ROW_INC); + DUMPREG(DISPC_GFX_PIXEL_INC); + DUMPREG(DISPC_GFX_WINDOW_SKIP); + DUMPREG(DISPC_GFX_TABLE_BA); + + DUMPREG(DISPC_DATA_CYCLE1); + DUMPREG(DISPC_DATA_CYCLE2); + DUMPREG(DISPC_DATA_CYCLE3); + + DUMPREG(DISPC_CPR_COEF_R); + DUMPREG(DISPC_CPR_COEF_G); + DUMPREG(DISPC_CPR_COEF_B); + + DUMPREG(DISPC_GFX_PRELOAD); + + DUMPREG(DISPC_VID_BA0(0)); + DUMPREG(DISPC_VID_BA1(0)); + DUMPREG(DISPC_VID_POSITION(0)); + DUMPREG(DISPC_VID_SIZE(0)); + DUMPREG(DISPC_VID_ATTRIBUTES(0)); + DUMPREG(DISPC_VID_FIFO_THRESHOLD(0)); + DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0)); + DUMPREG(DISPC_VID_ROW_INC(0)); + DUMPREG(DISPC_VID_PIXEL_INC(0)); + DUMPREG(DISPC_VID_FIR(0)); + DUMPREG(DISPC_VID_PICTURE_SIZE(0)); + DUMPREG(DISPC_VID_ACCU0(0)); + DUMPREG(DISPC_VID_ACCU1(0)); + + DUMPREG(DISPC_VID_BA0(1)); + DUMPREG(DISPC_VID_BA1(1)); + DUMPREG(DISPC_VID_POSITION(1)); + DUMPREG(DISPC_VID_SIZE(1)); + DUMPREG(DISPC_VID_ATTRIBUTES(1)); + DUMPREG(DISPC_VID_FIFO_THRESHOLD(1)); + DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1)); + DUMPREG(DISPC_VID_ROW_INC(1)); + DUMPREG(DISPC_VID_PIXEL_INC(1)); + DUMPREG(DISPC_VID_FIR(1)); + DUMPREG(DISPC_VID_PICTURE_SIZE(1)); + DUMPREG(DISPC_VID_ACCU0(1)); + DUMPREG(DISPC_VID_ACCU1(1)); + + DUMPREG(DISPC_VID_FIR_COEF_H(0, 0)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 1)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 2)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 3)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 4)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 5)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 6)); + DUMPREG(DISPC_VID_FIR_COEF_H(0, 7)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6)); + DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7)); + DUMPREG(DISPC_VID_CONV_COEF(0, 0)); + DUMPREG(DISPC_VID_CONV_COEF(0, 1)); + DUMPREG(DISPC_VID_CONV_COEF(0, 2)); + DUMPREG(DISPC_VID_CONV_COEF(0, 3)); + DUMPREG(DISPC_VID_CONV_COEF(0, 4)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 0)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 1)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 2)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 3)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 4)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 5)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 6)); + DUMPREG(DISPC_VID_FIR_COEF_V(0, 7)); + + DUMPREG(DISPC_VID_FIR_COEF_H(1, 0)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 1)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 2)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 3)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 4)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 5)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 6)); + DUMPREG(DISPC_VID_FIR_COEF_H(1, 7)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6)); + DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7)); + DUMPREG(DISPC_VID_CONV_COEF(1, 0)); + DUMPREG(DISPC_VID_CONV_COEF(1, 1)); + DUMPREG(DISPC_VID_CONV_COEF(1, 2)); + DUMPREG(DISPC_VID_CONV_COEF(1, 3)); + DUMPREG(DISPC_VID_CONV_COEF(1, 4)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 0)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 1)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 2)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 3)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 4)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 5)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 6)); + DUMPREG(DISPC_VID_FIR_COEF_V(1, 7)); + + DUMPREG(DISPC_VID_PRELOAD(0)); + DUMPREG(DISPC_VID_PRELOAD(1)); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +#undef DUMPREG +} + +static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc, + bool ihs, bool ivs, u8 acbi, u8 acb) +{ + u32 l = 0; + + DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", + onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); + + l |= FLD_VAL(onoff, 17, 17); + l |= FLD_VAL(rf, 16, 16); + l |= FLD_VAL(ieo, 15, 15); + l |= FLD_VAL(ipc, 14, 14); + l |= FLD_VAL(ihs, 13, 13); + l |= FLD_VAL(ivs, 12, 12); + l |= FLD_VAL(acbi, 11, 8); + l |= FLD_VAL(acb, 7, 0); + + enable_clocks(1); + dispc_write_reg(DISPC_POL_FREQ, l); + enable_clocks(0); +} + +void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb) +{ + _dispc_set_pol_freq((config & OMAP_DSS_LCD_ONOFF) != 0, + (config & OMAP_DSS_LCD_RF) != 0, + (config & OMAP_DSS_LCD_IEO) != 0, + (config & OMAP_DSS_LCD_IPC) != 0, + (config & OMAP_DSS_LCD_IHS) != 0, + (config & OMAP_DSS_LCD_IVS) != 0, + acbi, acb); +} + +/* with fck as input clock rate, find dispc dividers that produce req_pck */ +void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, + struct dispc_clock_info *cinfo) +{ + u16 pcd_min = is_tft ? 2 : 3; + unsigned long best_pck; + u16 best_ld, cur_ld; + u16 best_pd, cur_pd; + + best_pck = 0; + best_ld = 0; + best_pd = 0; + + for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { + unsigned long lck = fck / cur_ld; + + for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { + unsigned long pck = lck / cur_pd; + long old_delta = abs(best_pck - req_pck); + long new_delta = abs(pck - req_pck); + + if (best_pck == 0 || new_delta < old_delta) { + best_pck = pck; + best_ld = cur_ld; + best_pd = cur_pd; + + if (pck == req_pck) + goto found; + } + + if (pck < req_pck) + break; + } + + if (lck / pcd_min < req_pck) + break; + } + +found: + cinfo->lck_div = best_ld; + cinfo->pck_div = best_pd; + cinfo->lck = fck / cinfo->lck_div; + cinfo->pck = cinfo->lck / cinfo->pck_div; +} + +/* calculate clock rates using dividers in cinfo */ +int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, + struct dispc_clock_info *cinfo) +{ + if (cinfo->lck_div > 255 || cinfo->lck_div == 0) + return -EINVAL; + if (cinfo->pck_div < 2 || cinfo->pck_div > 255) + return -EINVAL; + + cinfo->lck = dispc_fclk_rate / cinfo->lck_div; + cinfo->pck = cinfo->lck / cinfo->pck_div; + + return 0; +} + +int dispc_set_clock_div(struct dispc_clock_info *cinfo) +{ + DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div); + DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div); + + dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); + + return 0; +} + +int dispc_get_clock_div(struct dispc_clock_info *cinfo) +{ + unsigned long fck; + + fck = dispc_fclk_rate(); + + cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16); + cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0); + + cinfo->lck = fck / cinfo->lck_div; + cinfo->pck = cinfo->lck / cinfo->pck_div; + + return 0; +} + +/* dispc.irq_lock has to be locked by the caller */ +static void _omap_dispc_set_irqs(void) +{ + u32 mask; + u32 old_mask; + int i; + struct omap_dispc_isr_data *isr_data; + + mask = dispc.irq_error_mask; + + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + isr_data = &dispc.registered_isr[i]; + + if (isr_data->isr == NULL) + continue; + + mask |= isr_data->mask; + } + + enable_clocks(1); + + old_mask = dispc_read_reg(DISPC_IRQENABLE); + /* clear the irqstatus for newly enabled irqs */ + dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask); + + dispc_write_reg(DISPC_IRQENABLE, mask); + + enable_clocks(0); +} + +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) +{ + int i; + int ret; + unsigned long flags; + struct omap_dispc_isr_data *isr_data; + + if (isr == NULL) + return -EINVAL; + + spin_lock_irqsave(&dispc.irq_lock, flags); + + /* check for duplicate entry */ + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + isr_data = &dispc.registered_isr[i]; + if (isr_data->isr == isr && isr_data->arg == arg && + isr_data->mask == mask) { + ret = -EINVAL; + goto err; + } + } + + isr_data = NULL; + ret = -EBUSY; + + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + isr_data = &dispc.registered_isr[i]; + + if (isr_data->isr != NULL) + continue; + + isr_data->isr = isr; + isr_data->arg = arg; + isr_data->mask = mask; + ret = 0; + + break; + } + + _omap_dispc_set_irqs(); + + spin_unlock_irqrestore(&dispc.irq_lock, flags); + + return 0; +err: + spin_unlock_irqrestore(&dispc.irq_lock, flags); + + return ret; +} +EXPORT_SYMBOL(omap_dispc_register_isr); + +int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) +{ + int i; + unsigned long flags; + int ret = -EINVAL; + struct omap_dispc_isr_data *isr_data; + + spin_lock_irqsave(&dispc.irq_lock, flags); + + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + isr_data = &dispc.registered_isr[i]; + if (isr_data->isr != isr || isr_data->arg != arg || + isr_data->mask != mask) + continue; + + /* found the correct isr */ + + isr_data->isr = NULL; + isr_data->arg = NULL; + isr_data->mask = 0; + + ret = 0; + break; + } + + if (ret == 0) + _omap_dispc_set_irqs(); + + spin_unlock_irqrestore(&dispc.irq_lock, flags); + + return ret; +} +EXPORT_SYMBOL(omap_dispc_unregister_isr); + +#ifdef DEBUG +static void print_irq_status(u32 status) +{ + if ((status & dispc.irq_error_mask) == 0) + return; + + printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); + +#define PIS(x) \ + if (status & DISPC_IRQ_##x) \ + printk(#x " "); + PIS(GFX_FIFO_UNDERFLOW); + PIS(OCP_ERR); + PIS(VID1_FIFO_UNDERFLOW); + PIS(VID2_FIFO_UNDERFLOW); + PIS(SYNC_LOST); + PIS(SYNC_LOST_DIGIT); +#undef PIS + + printk("\n"); +} +#endif + +/* Called from dss.c. Note that we don't touch clocks here, + * but we presume they are on because we got an IRQ. However, + * an irq handler may turn the clocks off, so we may not have + * clock later in the function. */ +void dispc_irq_handler(void) +{ + int i; + u32 irqstatus; + u32 handledirqs = 0; + u32 unhandled_errors; + struct omap_dispc_isr_data *isr_data; + struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; + + spin_lock(&dispc.irq_lock); + + irqstatus = dispc_read_reg(DISPC_IRQSTATUS); + +#ifdef DEBUG + if (dss_debug) + print_irq_status(irqstatus); +#endif + /* Ack the interrupt. Do it here before clocks are possibly turned + * off */ + dispc_write_reg(DISPC_IRQSTATUS, irqstatus); + /* flush posted write */ + dispc_read_reg(DISPC_IRQSTATUS); + + /* make a copy and unlock, so that isrs can unregister + * themselves */ + memcpy(registered_isr, dispc.registered_isr, + sizeof(registered_isr)); + + spin_unlock(&dispc.irq_lock); + + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + isr_data = ®istered_isr[i]; + + if (!isr_data->isr) + continue; + + if (isr_data->mask & irqstatus) { + isr_data->isr(isr_data->arg, irqstatus); + handledirqs |= isr_data->mask; + } + } + + spin_lock(&dispc.irq_lock); + + unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; + + if (unhandled_errors) { + dispc.error_irqs |= unhandled_errors; + + dispc.irq_error_mask &= ~unhandled_errors; + _omap_dispc_set_irqs(); + + schedule_work(&dispc.error_work); + } + + spin_unlock(&dispc.irq_lock); +} + +static void dispc_error_worker(struct work_struct *work) +{ + int i; + u32 errors; + unsigned long flags; + + spin_lock_irqsave(&dispc.irq_lock, flags); + errors = dispc.error_irqs; + dispc.error_irqs = 0; + spin_unlock_irqrestore(&dispc.irq_lock, flags); + + if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { + DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + if (ovl->id == 0) { + dispc_enable_plane(ovl->id, 0); + dispc_go(ovl->manager->id); + mdelay(50); + break; + } + } + } + + if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { + DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + if (ovl->id == 1) { + dispc_enable_plane(ovl->id, 0); + dispc_go(ovl->manager->id); + mdelay(50); + break; + } + } + } + + if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { + DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + if (ovl->id == 2) { + dispc_enable_plane(ovl->id, 0); + dispc_go(ovl->manager->id); + mdelay(50); + break; + } + } + } + + if (errors & DISPC_IRQ_SYNC_LOST) { + struct omap_overlay_manager *manager = NULL; + bool enable = false; + + DSSERR("SYNC_LOST, disabling LCD\n"); + + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + struct omap_overlay_manager *mgr; + mgr = omap_dss_get_overlay_manager(i); + + if (mgr->id == OMAP_DSS_CHANNEL_LCD) { + manager = mgr; + enable = mgr->device->state == + OMAP_DSS_DISPLAY_ACTIVE; + mgr->device->disable(mgr->device); + break; + } + } + + if (manager) { + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + if (ovl->id != 0 && ovl->manager == manager) + dispc_enable_plane(ovl->id, 0); + } + + dispc_go(manager->id); + mdelay(50); + if (enable) + manager->device->enable(manager->device); + } + } + + if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { + struct omap_overlay_manager *manager = NULL; + bool enable = false; + + DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); + + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + struct omap_overlay_manager *mgr; + mgr = omap_dss_get_overlay_manager(i); + + if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { + manager = mgr; + enable = mgr->device->state == + OMAP_DSS_DISPLAY_ACTIVE; + mgr->device->disable(mgr->device); + break; + } + } + + if (manager) { + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + if (ovl->id != 0 && ovl->manager == manager) + dispc_enable_plane(ovl->id, 0); + } + + dispc_go(manager->id); + mdelay(50); + if (enable) + manager->device->enable(manager->device); + } + } + + if (errors & DISPC_IRQ_OCP_ERR) { + DSSERR("OCP_ERR\n"); + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + struct omap_overlay_manager *mgr; + mgr = omap_dss_get_overlay_manager(i); + + if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) + mgr->device->disable(mgr->device); + } + } + + spin_lock_irqsave(&dispc.irq_lock, flags); + dispc.irq_error_mask |= errors; + _omap_dispc_set_irqs(); + spin_unlock_irqrestore(&dispc.irq_lock, flags); +} + +int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) +{ + void dispc_irq_wait_handler(void *data, u32 mask) + { + complete((struct completion *)data); + } + + int r; + DECLARE_COMPLETION_ONSTACK(completion); + + r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, + irqmask); + + if (r) + return r; + + timeout = wait_for_completion_timeout(&completion, timeout); + + omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); + + if (timeout == 0) + return -ETIMEDOUT; + + if (timeout == -ERESTARTSYS) + return -ERESTARTSYS; + + return 0; +} + +int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, + unsigned long timeout) +{ + void dispc_irq_wait_handler(void *data, u32 mask) + { + complete((struct completion *)data); + } + + int r; + DECLARE_COMPLETION_ONSTACK(completion); + + r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, + irqmask); + + if (r) + return r; + + timeout = wait_for_completion_interruptible_timeout(&completion, + timeout); + + omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); + + if (timeout == 0) + return -ETIMEDOUT; + + if (timeout == -ERESTARTSYS) + return -ERESTARTSYS; + + return 0; +} + +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC +void dispc_fake_vsync_irq(void) +{ + u32 irqstatus = DISPC_IRQ_VSYNC; + int i; + + local_irq_disable(); + + for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { + struct omap_dispc_isr_data *isr_data; + isr_data = &dispc.registered_isr[i]; + + if (!isr_data->isr) + continue; + + if (isr_data->mask & irqstatus) + isr_data->isr(isr_data->arg, irqstatus); + } + + local_irq_enable(); +} +#endif + +static void _omap_dispc_initialize_irq(void) +{ + unsigned long flags; + + spin_lock_irqsave(&dispc.irq_lock, flags); + + memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); + + dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; + + /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, + * so clear it */ + dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); + + _omap_dispc_set_irqs(); + + spin_unlock_irqrestore(&dispc.irq_lock, flags); +} + +void dispc_enable_sidle(void) +{ + REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ +} + +void dispc_disable_sidle(void) +{ + REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ +} + +static void _omap_dispc_initial_config(void) +{ + u32 l; + + l = dispc_read_reg(DISPC_SYSCONFIG); + l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ + l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ + l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ + l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ + dispc_write_reg(DISPC_SYSCONFIG, l); + + /* FUNCGATED */ + REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); + + /* L3 firewall setting: enable access to OCM RAM */ + /* XXX this should be somewhere in plat-omap */ + if (cpu_is_omap24xx()) + __raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0)); + + _dispc_setup_color_conv_coef(); + + dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); + + dispc_read_plane_fifo_sizes(); +} + +int dispc_init(void) +{ + u32 rev; + + spin_lock_init(&dispc.irq_lock); + + INIT_WORK(&dispc.error_work, dispc_error_worker); + + dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); + if (!dispc.base) { + DSSERR("can't ioremap DISPC\n"); + return -ENOMEM; + } + + enable_clocks(1); + + _omap_dispc_initial_config(); + + _omap_dispc_initialize_irq(); + + dispc_save_context(); + + rev = dispc_read_reg(DISPC_REVISION); + printk(KERN_INFO "OMAP DISPC rev %d.%d\n", + FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); + + enable_clocks(0); + + return 0; +} + +void dispc_exit(void) +{ + iounmap(dispc.base); +} + +int dispc_enable_plane(enum omap_plane plane, bool enable) +{ + DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); + + enable_clocks(1); + _dispc_enable_plane(plane, enable); + enable_clocks(0); + + return 0; +} + +int dispc_setup_plane(enum omap_plane plane, + u32 paddr, u16 screen_width, + u16 pos_x, u16 pos_y, + u16 width, u16 height, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, + enum omap_dss_rotation_type rotation_type, + u8 rotation, bool mirror, u8 global_alpha) +{ + int r = 0; + + DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> " + "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n", + plane, paddr, screen_width, pos_x, pos_y, + width, height, + out_width, out_height, + ilace, color_mode, + rotation, mirror); + + enable_clocks(1); + + r = _dispc_setup_plane(plane, + paddr, screen_width, + pos_x, pos_y, + width, height, + out_width, out_height, + color_mode, ilace, + rotation_type, + rotation, mirror, + global_alpha); + + enable_clocks(0); + + return r; +} diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c new file mode 100644 index 00000000000..3b92b84b956 --- /dev/null +++ b/drivers/video/omap2/dss/display.c @@ -0,0 +1,671 @@ +/* + * linux/drivers/video/omap2/dss/display.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DISPLAY" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/list.h> +#include <linux/platform_device.h> + +#include <plat/display.h> +#include "dss.h" + +static LIST_HEAD(display_list); + +static ssize_t display_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED; + + return snprintf(buf, PAGE_SIZE, "%d\n", enabled); +} + +static ssize_t display_enabled_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + bool enabled, r; + + enabled = simple_strtoul(buf, NULL, 10); + + if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) { + if (enabled) { + r = dssdev->enable(dssdev); + if (r) + return r; + } else { + dssdev->disable(dssdev); + } + } + + return size; +} + +static ssize_t display_upd_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO; + if (dssdev->get_update_mode) + mode = dssdev->get_update_mode(dssdev); + return snprintf(buf, PAGE_SIZE, "%d\n", mode); +} + +static ssize_t display_upd_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + int val, r; + enum omap_dss_update_mode mode; + + val = simple_strtoul(buf, NULL, 10); + + switch (val) { + case OMAP_DSS_UPDATE_DISABLED: + case OMAP_DSS_UPDATE_AUTO: + case OMAP_DSS_UPDATE_MANUAL: + mode = (enum omap_dss_update_mode)val; + break; + default: + return -EINVAL; + } + + r = dssdev->set_update_mode(dssdev, mode); + if (r) + return r; + + return size; +} + +static ssize_t display_tear_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + return snprintf(buf, PAGE_SIZE, "%d\n", + dssdev->get_te ? dssdev->get_te(dssdev) : 0); +} + +static ssize_t display_tear_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + unsigned long te; + int r; + + if (!dssdev->enable_te || !dssdev->get_te) + return -ENOENT; + + te = simple_strtoul(buf, NULL, 0); + + r = dssdev->enable_te(dssdev, te); + if (r) + return r; + + return size; +} + +static ssize_t display_timings_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct omap_video_timings t; + + if (!dssdev->get_timings) + return -ENOENT; + + dssdev->get_timings(dssdev, &t); + + return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n", + t.pixel_clock, + t.x_res, t.hfp, t.hbp, t.hsw, + t.y_res, t.vfp, t.vbp, t.vsw); +} + +static ssize_t display_timings_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + struct omap_video_timings t; + int r, found; + + if (!dssdev->set_timings || !dssdev->check_timings) + return -ENOENT; + + found = 0; +#ifdef CONFIG_OMAP2_DSS_VENC + if (strncmp("pal", buf, 3) == 0) { + t = omap_dss_pal_timings; + found = 1; + } else if (strncmp("ntsc", buf, 4) == 0) { + t = omap_dss_ntsc_timings; + found = 1; + } +#endif + if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu", + &t.pixel_clock, + &t.x_res, &t.hfp, &t.hbp, &t.hsw, + &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9) + return -EINVAL; + + r = dssdev->check_timings(dssdev, &t); + if (r) + return r; + + dssdev->set_timings(dssdev, &t); + + return size; +} + +static ssize_t display_rotate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + int rotate; + if (!dssdev->get_rotate) + return -ENOENT; + rotate = dssdev->get_rotate(dssdev); + return snprintf(buf, PAGE_SIZE, "%u\n", rotate); +} + +static ssize_t display_rotate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + unsigned long rot; + int r; + + if (!dssdev->set_rotate || !dssdev->get_rotate) + return -ENOENT; + + rot = simple_strtoul(buf, NULL, 0); + + r = dssdev->set_rotate(dssdev, rot); + if (r) + return r; + + return size; +} + +static ssize_t display_mirror_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + int mirror; + if (!dssdev->get_mirror) + return -ENOENT; + mirror = dssdev->get_mirror(dssdev); + return snprintf(buf, PAGE_SIZE, "%u\n", mirror); +} + +static ssize_t display_mirror_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + unsigned long mirror; + int r; + + if (!dssdev->set_mirror || !dssdev->get_mirror) + return -ENOENT; + + mirror = simple_strtoul(buf, NULL, 0); + + r = dssdev->set_mirror(dssdev, mirror); + if (r) + return r; + + return size; +} + +static ssize_t display_wss_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + unsigned int wss; + + if (!dssdev->get_wss) + return -ENOENT; + + wss = dssdev->get_wss(dssdev); + + return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss); +} + +static ssize_t display_wss_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + unsigned long wss; + int r; + + if (!dssdev->get_wss || !dssdev->set_wss) + return -ENOENT; + + if (strict_strtoul(buf, 0, &wss)) + return -EINVAL; + + if (wss > 0xfffff) + return -EINVAL; + + r = dssdev->set_wss(dssdev, wss); + if (r) + return r; + + return size; +} + +static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR, + display_enabled_show, display_enabled_store); +static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR, + display_upd_mode_show, display_upd_mode_store); +static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR, + display_tear_show, display_tear_store); +static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR, + display_timings_show, display_timings_store); +static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR, + display_rotate_show, display_rotate_store); +static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR, + display_mirror_show, display_mirror_store); +static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR, + display_wss_show, display_wss_store); + +static struct device_attribute *display_sysfs_attrs[] = { + &dev_attr_enabled, + &dev_attr_update_mode, + &dev_attr_tear_elim, + &dev_attr_timings, + &dev_attr_rotate, + &dev_attr_mirror, + &dev_attr_wss, + NULL +}; + +static void default_get_resolution(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres) +{ + *xres = dssdev->panel.timings.x_res; + *yres = dssdev->panel.timings.y_res; +} + +void default_get_overlay_fifo_thresholds(enum omap_plane plane, + u32 fifo_size, enum omap_burst_size *burst_size, + u32 *fifo_low, u32 *fifo_high) +{ + unsigned burst_size_bytes; + + *burst_size = OMAP_DSS_BURST_16x32; + burst_size_bytes = 16 * 32 / 8; + + *fifo_high = fifo_size - 1; + *fifo_low = fifo_size - burst_size_bytes; +} + +static int default_wait_vsync(struct omap_dss_device *dssdev) +{ + unsigned long timeout = msecs_to_jiffies(500); + u32 irq; + + if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) + irq = DISPC_IRQ_EVSYNC_ODD; + else + irq = DISPC_IRQ_VSYNC; + + return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); +} + +static int default_get_recommended_bpp(struct omap_dss_device *dssdev) +{ + if (dssdev->panel.recommended_bpp) + return dssdev->panel.recommended_bpp; + + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_DPI: + if (dssdev->phy.dpi.data_lines == 24) + return 24; + else + return 16; + + case OMAP_DISPLAY_TYPE_DBI: + case OMAP_DISPLAY_TYPE_DSI: + if (dssdev->ctrl.pixel_size == 24) + return 24; + else + return 16; + case OMAP_DISPLAY_TYPE_VENC: + case OMAP_DISPLAY_TYPE_SDI: + return 24; + return 24; + default: + BUG(); + } +} + +/* Checks if replication logic should be used. Only use for active matrix, + * when overlay is in RGB12U or RGB16 mode, and LCD interface is + * 18bpp or 24bpp */ +bool dss_use_replication(struct omap_dss_device *dssdev, + enum omap_color_mode mode) +{ + int bpp; + + if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16) + return false; + + if (dssdev->type == OMAP_DISPLAY_TYPE_DPI && + (dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0) + return false; + + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_DPI: + bpp = dssdev->phy.dpi.data_lines; + break; + case OMAP_DISPLAY_TYPE_VENC: + case OMAP_DISPLAY_TYPE_SDI: + bpp = 24; + break; + case OMAP_DISPLAY_TYPE_DBI: + case OMAP_DISPLAY_TYPE_DSI: + bpp = dssdev->ctrl.pixel_size; + break; + default: + BUG(); + } + + return bpp > 16; +} + +void dss_init_device(struct platform_device *pdev, + struct omap_dss_device *dssdev) +{ + struct device_attribute *attr; + int i; + int r; + + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_DPI: +#ifdef CONFIG_OMAP2_DSS_RFBI + case OMAP_DISPLAY_TYPE_DBI: +#endif +#ifdef CONFIG_OMAP2_DSS_SDI + case OMAP_DISPLAY_TYPE_SDI: +#endif +#ifdef CONFIG_OMAP2_DSS_DSI + case OMAP_DISPLAY_TYPE_DSI: +#endif +#ifdef CONFIG_OMAP2_DSS_VENC + case OMAP_DISPLAY_TYPE_VENC: +#endif + break; + default: + DSSERR("Support for display '%s' not compiled in.\n", + dssdev->name); + return; + } + + dssdev->get_resolution = default_get_resolution; + dssdev->get_recommended_bpp = default_get_recommended_bpp; + dssdev->wait_vsync = default_wait_vsync; + + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_DPI: + r = dpi_init_display(dssdev); + break; +#ifdef CONFIG_OMAP2_DSS_RFBI + case OMAP_DISPLAY_TYPE_DBI: + r = rfbi_init_display(dssdev); + break; +#endif +#ifdef CONFIG_OMAP2_DSS_VENC + case OMAP_DISPLAY_TYPE_VENC: + r = venc_init_display(dssdev); + break; +#endif +#ifdef CONFIG_OMAP2_DSS_SDI + case OMAP_DISPLAY_TYPE_SDI: + r = sdi_init_display(dssdev); + break; +#endif +#ifdef CONFIG_OMAP2_DSS_DSI + case OMAP_DISPLAY_TYPE_DSI: + r = dsi_init_display(dssdev); + break; +#endif + default: + BUG(); + } + + if (r) { + DSSERR("failed to init display %s\n", dssdev->name); + return; + } + + /* create device sysfs files */ + i = 0; + while ((attr = display_sysfs_attrs[i++]) != NULL) { + r = device_create_file(&dssdev->dev, attr); + if (r) + DSSERR("failed to create sysfs file\n"); + } + + /* create display? sysfs links */ + r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj, + dev_name(&dssdev->dev)); + if (r) + DSSERR("failed to create sysfs display link\n"); +} + +void dss_uninit_device(struct platform_device *pdev, + struct omap_dss_device *dssdev) +{ + struct device_attribute *attr; + int i = 0; + + sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev)); + + while ((attr = display_sysfs_attrs[i++]) != NULL) + device_remove_file(&dssdev->dev, attr); + + if (dssdev->manager) + dssdev->manager->unset_device(dssdev->manager); +} + +static int dss_suspend_device(struct device *dev, void *data) +{ + int r; + struct omap_dss_device *dssdev = to_dss_device(dev); + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { + dssdev->activate_after_resume = false; + return 0; + } + + if (!dssdev->suspend) { + DSSERR("display '%s' doesn't implement suspend\n", + dssdev->name); + return -ENOSYS; + } + + r = dssdev->suspend(dssdev); + if (r) + return r; + + dssdev->activate_after_resume = true; + + return 0; +} + +int dss_suspend_all_devices(void) +{ + int r; + struct bus_type *bus = dss_get_bus(); + + r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device); + if (r) { + /* resume all displays that were suspended */ + dss_resume_all_devices(); + return r; + } + + return 0; +} + +static int dss_resume_device(struct device *dev, void *data) +{ + int r; + struct omap_dss_device *dssdev = to_dss_device(dev); + + if (dssdev->activate_after_resume && dssdev->resume) { + r = dssdev->resume(dssdev); + if (r) + return r; + } + + dssdev->activate_after_resume = false; + + return 0; +} + +int dss_resume_all_devices(void) +{ + struct bus_type *bus = dss_get_bus(); + + return bus_for_each_dev(bus, NULL, NULL, dss_resume_device); +} + +static int dss_disable_device(struct device *dev, void *data) +{ + struct omap_dss_device *dssdev = to_dss_device(dev); + dssdev->disable(dssdev); + return 0; +} + +void dss_disable_all_devices(void) +{ + struct bus_type *bus = dss_get_bus(); + bus_for_each_dev(bus, NULL, NULL, dss_disable_device); +} + + +void omap_dss_get_device(struct omap_dss_device *dssdev) +{ + get_device(&dssdev->dev); +} +EXPORT_SYMBOL(omap_dss_get_device); + +void omap_dss_put_device(struct omap_dss_device *dssdev) +{ + put_device(&dssdev->dev); +} +EXPORT_SYMBOL(omap_dss_put_device); + +/* ref count of the found device is incremented. ref count + * of from-device is decremented. */ +struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from) +{ + struct device *dev; + struct device *dev_start = NULL; + struct omap_dss_device *dssdev = NULL; + + int match(struct device *dev, void *data) + { + /* skip panels connected to controllers */ + if (to_dss_device(dev)->panel.ctrl) + return 0; + + return 1; + } + + if (from) + dev_start = &from->dev; + dev = bus_find_device(dss_get_bus(), dev_start, NULL, match); + if (dev) + dssdev = to_dss_device(dev); + if (from) + put_device(&from->dev); + + return dssdev; +} +EXPORT_SYMBOL(omap_dss_get_next_device); + +struct omap_dss_device *omap_dss_find_device(void *data, + int (*match)(struct omap_dss_device *dssdev, void *data)) +{ + struct omap_dss_device *dssdev = NULL; + + while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) { + if (match(dssdev, data)) + return dssdev; + } + + return NULL; +} +EXPORT_SYMBOL(omap_dss_find_device); + +int omap_dss_start_device(struct omap_dss_device *dssdev) +{ + int r; + + if (!dssdev->driver) { + DSSDBG("no driver\n"); + r = -ENODEV; + goto err0; + } + + if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) { + DSSDBG("no panel driver\n"); + r = -ENODEV; + goto err0; + } + + if (!try_module_get(dssdev->dev.driver->owner)) { + r = -ENODEV; + goto err0; + } + + if (dssdev->ctrl.panel) { + if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) { + r = -ENODEV; + goto err1; + } + } + + return 0; +err1: + module_put(dssdev->dev.driver->owner); +err0: + return r; +} +EXPORT_SYMBOL(omap_dss_start_device); + +void omap_dss_stop_device(struct omap_dss_device *dssdev) +{ + if (dssdev->ctrl.panel) + module_put(dssdev->ctrl.panel->dev.driver->owner); + + module_put(dssdev->dev.driver->owner); +} +EXPORT_SYMBOL(omap_dss_stop_device); + diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c new file mode 100644 index 00000000000..2d71031baa2 --- /dev/null +++ b/drivers/video/omap2/dss/dpi.c @@ -0,0 +1,399 @@ +/* + * linux/drivers/video/omap2/dss/dpi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DPI" + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/errno.h> + +#include <plat/display.h> +#include <plat/cpu.h> + +#include "dss.h" + +static struct { + int update_enabled; +} dpi; + +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL +static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, + unsigned long *fck, int *lck_div, int *pck_div) +{ + struct dsi_clock_info dsi_cinfo; + struct dispc_clock_info dispc_cinfo; + int r; + + r = dsi_pll_calc_clock_div_pck(is_tft, pck_req, &dsi_cinfo, + &dispc_cinfo); + if (r) + return r; + + r = dsi_pll_set_clock_div(&dsi_cinfo); + if (r) + return r; + + dss_select_clk_source(0, 1); + + r = dispc_set_clock_div(&dispc_cinfo); + if (r) + return r; + + *fck = dsi_cinfo.dsi1_pll_fclk; + *lck_div = dispc_cinfo.lck_div; + *pck_div = dispc_cinfo.pck_div; + + return 0; +} +#else +static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, + unsigned long *fck, int *lck_div, int *pck_div) +{ + struct dss_clock_info dss_cinfo; + struct dispc_clock_info dispc_cinfo; + int r; + + r = dss_calc_clock_div(is_tft, pck_req, &dss_cinfo, &dispc_cinfo); + if (r) + return r; + + r = dss_set_clock_div(&dss_cinfo); + if (r) + return r; + + r = dispc_set_clock_div(&dispc_cinfo); + if (r) + return r; + + *fck = dss_cinfo.fck; + *lck_div = dispc_cinfo.lck_div; + *pck_div = dispc_cinfo.pck_div; + + return 0; +} +#endif + +static int dpi_set_mode(struct omap_dss_device *dssdev) +{ + struct omap_video_timings *t = &dssdev->panel.timings; + int lck_div, pck_div; + unsigned long fck; + unsigned long pck; + bool is_tft; + int r = 0; + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, + dssdev->panel.acb); + + is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; + +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL + r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000, + &fck, &lck_div, &pck_div); +#else + r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000, + &fck, &lck_div, &pck_div); +#endif + if (r) + goto err0; + + pck = fck / lck_div / pck_div / 1000; + + if (pck != t->pixel_clock) { + DSSWARN("Could not find exact pixel clock. " + "Requested %d kHz, got %lu kHz\n", + t->pixel_clock, pck); + + t->pixel_clock = pck; + } + + dispc_set_lcd_timings(t); + +err0: + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + return r; +} + +static int dpi_basic_init(struct omap_dss_device *dssdev) +{ + bool is_tft; + + is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; + + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); + dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : + OMAP_DSS_LCD_DISPLAY_STN); + dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines); + + return 0; +} + +static int dpi_display_enable(struct omap_dss_device *dssdev) +{ + int r; + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { + DSSERR("display already enabled\n"); + r = -EINVAL; + goto err1; + } + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + r = dpi_basic_init(dssdev); + if (r) + goto err2; + +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL + dss_clk_enable(DSS_CLK_FCK2); + r = dsi_pll_init(dssdev, 0, 1); + if (r) + goto err3; +#endif + r = dpi_set_mode(dssdev); + if (r) + goto err4; + + mdelay(2); + + dispc_enable_lcd_out(1); + + r = dssdev->driver->enable(dssdev); + if (r) + goto err5; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; + +err5: + dispc_enable_lcd_out(0); +err4: +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL + dsi_pll_uninit(); +err3: + dss_clk_disable(DSS_CLK_FCK2); +#endif +err2: + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +err1: + omap_dss_stop_device(dssdev); +err0: + return r; +} + +static int dpi_display_resume(struct omap_dss_device *dssdev); + +static void dpi_display_disable(struct omap_dss_device *dssdev) +{ + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) + return; + + if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) + dpi_display_resume(dssdev); + + dssdev->driver->disable(dssdev); + + dispc_enable_lcd_out(0); + +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL + dss_select_clk_source(0, 0); + dsi_pll_uninit(); + dss_clk_disable(DSS_CLK_FCK2); +#endif + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + + omap_dss_stop_device(dssdev); +} + +static int dpi_display_suspend(struct omap_dss_device *dssdev) +{ + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EINVAL; + + DSSDBG("dpi_display_suspend\n"); + + if (dssdev->driver->suspend) + dssdev->driver->suspend(dssdev); + + dispc_enable_lcd_out(0); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + + return 0; +} + +static int dpi_display_resume(struct omap_dss_device *dssdev) +{ + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) + return -EINVAL; + + DSSDBG("dpi_display_resume\n"); + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dispc_enable_lcd_out(1); + + if (dssdev->driver->resume) + dssdev->driver->resume(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +} + +static void dpi_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + DSSDBG("dpi_set_timings\n"); + dssdev->panel.timings = *timings; + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { + dpi_set_mode(dssdev); + dispc_go(OMAP_DSS_CHANNEL_LCD); + } +} + +static int dpi_check_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + bool is_tft; + int r; + int lck_div, pck_div; + unsigned long fck; + unsigned long pck; + + if (!dispc_lcd_timings_ok(timings)) + return -EINVAL; + + if (timings->pixel_clock == 0) + return -EINVAL; + + is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; + +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL + { + struct dsi_clock_info dsi_cinfo; + struct dispc_clock_info dispc_cinfo; + r = dsi_pll_calc_clock_div_pck(is_tft, + timings->pixel_clock * 1000, + &dsi_cinfo, &dispc_cinfo); + + if (r) + return r; + + fck = dsi_cinfo.dsi1_pll_fclk; + lck_div = dispc_cinfo.lck_div; + pck_div = dispc_cinfo.pck_div; + } +#else + { + struct dss_clock_info dss_cinfo; + struct dispc_clock_info dispc_cinfo; + r = dss_calc_clock_div(is_tft, timings->pixel_clock * 1000, + &dss_cinfo, &dispc_cinfo); + + if (r) + return r; + + fck = dss_cinfo.fck; + lck_div = dispc_cinfo.lck_div; + pck_div = dispc_cinfo.pck_div; + } +#endif + + pck = fck / lck_div / pck_div / 1000; + + timings->pixel_clock = pck; + + return 0; +} + +static void dpi_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + *timings = dssdev->panel.timings; +} + +static int dpi_display_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + if (mode == OMAP_DSS_UPDATE_MANUAL) + return -EINVAL; + + if (mode == OMAP_DSS_UPDATE_DISABLED) { + dispc_enable_lcd_out(0); + dpi.update_enabled = 0; + } else { + dispc_enable_lcd_out(1); + dpi.update_enabled = 1; + } + + return 0; +} + +static enum omap_dss_update_mode dpi_display_get_update_mode( + struct omap_dss_device *dssdev) +{ + return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : + OMAP_DSS_UPDATE_DISABLED; +} + +int dpi_init_display(struct omap_dss_device *dssdev) +{ + DSSDBG("init_display\n"); + + dssdev->enable = dpi_display_enable; + dssdev->disable = dpi_display_disable; + dssdev->suspend = dpi_display_suspend; + dssdev->resume = dpi_display_resume; + dssdev->set_timings = dpi_set_timings; + dssdev->check_timings = dpi_check_timings; + dssdev->get_timings = dpi_get_timings; + dssdev->set_update_mode = dpi_display_set_update_mode; + dssdev->get_update_mode = dpi_display_get_update_mode; + + return 0; +} + +int dpi_init(void) +{ + return 0; +} + +void dpi_exit(void) +{ +} + diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c new file mode 100644 index 00000000000..5936487b5de --- /dev/null +++ b/drivers/video/omap2/dss/dsi.c @@ -0,0 +1,3710 @@ +/* + * linux/drivers/video/omap2/dss/dsi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DSI" + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/seq_file.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/kthread.h> +#include <linux/wait.h> + +#include <plat/display.h> +#include <plat/clock.h> + +#include "dss.h" + +/*#define VERBOSE_IRQ*/ +#define DSI_CATCH_MISSING_TE + +#define DSI_BASE 0x4804FC00 + +struct dsi_reg { u16 idx; }; + +#define DSI_REG(idx) ((const struct dsi_reg) { idx }) + +#define DSI_SZ_REGS SZ_1K +/* DSI Protocol Engine */ + +#define DSI_REVISION DSI_REG(0x0000) +#define DSI_SYSCONFIG DSI_REG(0x0010) +#define DSI_SYSSTATUS DSI_REG(0x0014) +#define DSI_IRQSTATUS DSI_REG(0x0018) +#define DSI_IRQENABLE DSI_REG(0x001C) +#define DSI_CTRL DSI_REG(0x0040) +#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) +#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) +#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) +#define DSI_CLK_CTRL DSI_REG(0x0054) +#define DSI_TIMING1 DSI_REG(0x0058) +#define DSI_TIMING2 DSI_REG(0x005C) +#define DSI_VM_TIMING1 DSI_REG(0x0060) +#define DSI_VM_TIMING2 DSI_REG(0x0064) +#define DSI_VM_TIMING3 DSI_REG(0x0068) +#define DSI_CLK_TIMING DSI_REG(0x006C) +#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) +#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) +#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) +#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) +#define DSI_VM_TIMING4 DSI_REG(0x0080) +#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) +#define DSI_VM_TIMING5 DSI_REG(0x0088) +#define DSI_VM_TIMING6 DSI_REG(0x008C) +#define DSI_VM_TIMING7 DSI_REG(0x0090) +#define DSI_STOPCLK_TIMING DSI_REG(0x0094) +#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) +#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) +#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) +#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) +#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) +#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) +#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) + +/* DSIPHY_SCP */ + +#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) +#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) +#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) +#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) + +/* DSI_PLL_CTRL_SCP */ + +#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) +#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) +#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) +#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) +#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) + +#define REG_GET(idx, start, end) \ + FLD_GET(dsi_read_reg(idx), start, end) + +#define REG_FLD_MOD(idx, val, start, end) \ + dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) + +/* Global interrupts */ +#define DSI_IRQ_VC0 (1 << 0) +#define DSI_IRQ_VC1 (1 << 1) +#define DSI_IRQ_VC2 (1 << 2) +#define DSI_IRQ_VC3 (1 << 3) +#define DSI_IRQ_WAKEUP (1 << 4) +#define DSI_IRQ_RESYNC (1 << 5) +#define DSI_IRQ_PLL_LOCK (1 << 7) +#define DSI_IRQ_PLL_UNLOCK (1 << 8) +#define DSI_IRQ_PLL_RECALL (1 << 9) +#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) +#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) +#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) +#define DSI_IRQ_TE_TRIGGER (1 << 16) +#define DSI_IRQ_ACK_TRIGGER (1 << 17) +#define DSI_IRQ_SYNC_LOST (1 << 18) +#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) +#define DSI_IRQ_TA_TIMEOUT (1 << 20) +#define DSI_IRQ_ERROR_MASK \ + (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ + DSI_IRQ_TA_TIMEOUT) +#define DSI_IRQ_CHANNEL_MASK 0xf + +/* Virtual channel interrupts */ +#define DSI_VC_IRQ_CS (1 << 0) +#define DSI_VC_IRQ_ECC_CORR (1 << 1) +#define DSI_VC_IRQ_PACKET_SENT (1 << 2) +#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) +#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) +#define DSI_VC_IRQ_BTA (1 << 5) +#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) +#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) +#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) +#define DSI_VC_IRQ_ERROR_MASK \ + (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ + DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ + DSI_VC_IRQ_FIFO_TX_UDF) + +/* ComplexIO interrupts */ +#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) +#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) +#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) +#define DSI_CIO_IRQ_ERRESC1 (1 << 5) +#define DSI_CIO_IRQ_ERRESC2 (1 << 6) +#define DSI_CIO_IRQ_ERRESC3 (1 << 7) +#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) +#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) +#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) +#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) +#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) +#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) +#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) +#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) +#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) +#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) + +#define DSI_DT_DCS_SHORT_WRITE_0 0x05 +#define DSI_DT_DCS_SHORT_WRITE_1 0x15 +#define DSI_DT_DCS_READ 0x06 +#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 +#define DSI_DT_NULL_PACKET 0x09 +#define DSI_DT_DCS_LONG_WRITE 0x39 + +#define DSI_DT_RX_ACK_WITH_ERR 0x02 +#define DSI_DT_RX_DCS_LONG_READ 0x1c +#define DSI_DT_RX_SHORT_READ_1 0x21 +#define DSI_DT_RX_SHORT_READ_2 0x22 + +#define FINT_MAX 2100000 +#define FINT_MIN 750000 +#define REGN_MAX (1 << 7) +#define REGM_MAX ((1 << 11) - 1) +#define REGM3_MAX (1 << 4) +#define REGM4_MAX (1 << 4) +#define LP_DIV_MAX ((1 << 13) - 1) + +enum fifo_size { + DSI_FIFO_SIZE_0 = 0, + DSI_FIFO_SIZE_32 = 1, + DSI_FIFO_SIZE_64 = 2, + DSI_FIFO_SIZE_96 = 3, + DSI_FIFO_SIZE_128 = 4, +}; + +enum dsi_vc_mode { + DSI_VC_MODE_L4 = 0, + DSI_VC_MODE_VP, +}; + +struct dsi_update_region { + bool dirty; + u16 x, y, w, h; + struct omap_dss_device *device; +}; + +static struct +{ + void __iomem *base; + + struct dsi_clock_info current_cinfo; + + struct regulator *vdds_dsi_reg; + + struct { + enum dsi_vc_mode mode; + struct omap_dss_device *dssdev; + enum fifo_size fifo_size; + int dest_per; /* destination peripheral 0-3 */ + } vc[4]; + + struct mutex lock; + struct mutex bus_lock; + + unsigned pll_locked; + + struct completion bta_completion; + + struct task_struct *thread; + wait_queue_head_t waitqueue; + + spinlock_t update_lock; + bool framedone_received; + struct dsi_update_region update_region; + struct dsi_update_region active_update_region; + struct completion update_completion; + + enum omap_dss_update_mode user_update_mode; + enum omap_dss_update_mode update_mode; + bool te_enabled; + bool use_ext_te; + +#ifdef DSI_CATCH_MISSING_TE + struct timer_list te_timer; +#endif + + unsigned long cache_req_pck; + unsigned long cache_clk_freq; + struct dsi_clock_info cache_cinfo; + + u32 errors; + spinlock_t errors_lock; +#ifdef DEBUG + ktime_t perf_setup_time; + ktime_t perf_start_time; + ktime_t perf_start_time_auto; + int perf_measure_frames; +#endif + int debug_read; + int debug_write; +} dsi; + +#ifdef DEBUG +static unsigned int dsi_perf; +module_param_named(dsi_perf, dsi_perf, bool, 0644); +#endif + +static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) +{ + __raw_writel(val, dsi.base + idx.idx); +} + +static inline u32 dsi_read_reg(const struct dsi_reg idx) +{ + return __raw_readl(dsi.base + idx.idx); +} + + +void dsi_save_context(void) +{ +} + +void dsi_restore_context(void) +{ +} + +void dsi_bus_lock(void) +{ + mutex_lock(&dsi.bus_lock); +} +EXPORT_SYMBOL(dsi_bus_lock); + +void dsi_bus_unlock(void) +{ + mutex_unlock(&dsi.bus_lock); +} +EXPORT_SYMBOL(dsi_bus_unlock); + +static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, + int value) +{ + int t = 100000; + + while (REG_GET(idx, bitnum, bitnum) != value) { + if (--t == 0) + return !value; + } + + return value; +} + +#ifdef DEBUG +static void dsi_perf_mark_setup(void) +{ + dsi.perf_setup_time = ktime_get(); +} + +static void dsi_perf_mark_start(void) +{ + dsi.perf_start_time = ktime_get(); +} + +static void dsi_perf_mark_start_auto(void) +{ + dsi.perf_measure_frames = 0; + dsi.perf_start_time_auto = ktime_get(); +} + +static void dsi_perf_show(const char *name) +{ + ktime_t t, setup_time, trans_time; + u32 total_bytes; + u32 setup_us, trans_us, total_us; + + if (!dsi_perf) + return; + + if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) + return; + + t = ktime_get(); + + setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); + setup_us = (u32)ktime_to_us(setup_time); + if (setup_us == 0) + setup_us = 1; + + trans_time = ktime_sub(t, dsi.perf_start_time); + trans_us = (u32)ktime_to_us(trans_time); + if (trans_us == 0) + trans_us = 1; + + total_us = setup_us + trans_us; + + total_bytes = dsi.active_update_region.w * + dsi.active_update_region.h * + dsi.active_update_region.device->ctrl.pixel_size / 8; + + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { + static u32 s_total_trans_us, s_total_setup_us; + static u32 s_min_trans_us = 0xffffffff, s_min_setup_us; + static u32 s_max_trans_us, s_max_setup_us; + const int numframes = 100; + ktime_t total_time_auto; + u32 total_time_auto_us; + + dsi.perf_measure_frames++; + + if (setup_us < s_min_setup_us) + s_min_setup_us = setup_us; + + if (setup_us > s_max_setup_us) + s_max_setup_us = setup_us; + + s_total_setup_us += setup_us; + + if (trans_us < s_min_trans_us) + s_min_trans_us = trans_us; + + if (trans_us > s_max_trans_us) + s_max_trans_us = trans_us; + + s_total_trans_us += trans_us; + + if (dsi.perf_measure_frames < numframes) + return; + + total_time_auto = ktime_sub(t, dsi.perf_start_time_auto); + total_time_auto_us = (u32)ktime_to_us(total_time_auto); + + printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, " + "trans %u/%u/%u\n", + name, + 1000 * 1000 * numframes / total_time_auto_us, + s_min_setup_us, + s_max_setup_us, + s_total_setup_us / numframes, + s_min_trans_us, + s_max_trans_us, + s_total_trans_us / numframes); + + s_total_setup_us = 0; + s_min_setup_us = 0xffffffff; + s_max_setup_us = 0; + s_total_trans_us = 0; + s_min_trans_us = 0xffffffff; + s_max_trans_us = 0; + dsi_perf_mark_start_auto(); + } else { + printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " + "%u bytes, %u kbytes/sec\n", + name, + setup_us, + trans_us, + total_us, + 1000*1000 / total_us, + total_bytes, + total_bytes * 1000 / total_us); + } +} +#else +#define dsi_perf_mark_setup() +#define dsi_perf_mark_start() +#define dsi_perf_mark_start_auto() +#define dsi_perf_show(x) +#endif + +static void print_irq_status(u32 status) +{ +#ifndef VERBOSE_IRQ + if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) + return; +#endif + printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); + +#define PIS(x) \ + if (status & DSI_IRQ_##x) \ + printk(#x " "); +#ifdef VERBOSE_IRQ + PIS(VC0); + PIS(VC1); + PIS(VC2); + PIS(VC3); +#endif + PIS(WAKEUP); + PIS(RESYNC); + PIS(PLL_LOCK); + PIS(PLL_UNLOCK); + PIS(PLL_RECALL); + PIS(COMPLEXIO_ERR); + PIS(HS_TX_TIMEOUT); + PIS(LP_RX_TIMEOUT); + PIS(TE_TRIGGER); + PIS(ACK_TRIGGER); + PIS(SYNC_LOST); + PIS(LDO_POWER_GOOD); + PIS(TA_TIMEOUT); +#undef PIS + + printk("\n"); +} + +static void print_irq_status_vc(int channel, u32 status) +{ +#ifndef VERBOSE_IRQ + if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) + return; +#endif + printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); + +#define PIS(x) \ + if (status & DSI_VC_IRQ_##x) \ + printk(#x " "); + PIS(CS); + PIS(ECC_CORR); +#ifdef VERBOSE_IRQ + PIS(PACKET_SENT); +#endif + PIS(FIFO_TX_OVF); + PIS(FIFO_RX_OVF); + PIS(BTA); + PIS(ECC_NO_CORR); + PIS(FIFO_TX_UDF); + PIS(PP_BUSY_CHANGE); +#undef PIS + printk("\n"); +} + +static void print_irq_status_cio(u32 status) +{ + printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); + +#define PIS(x) \ + if (status & DSI_CIO_IRQ_##x) \ + printk(#x " "); + PIS(ERRSYNCESC1); + PIS(ERRSYNCESC2); + PIS(ERRSYNCESC3); + PIS(ERRESC1); + PIS(ERRESC2); + PIS(ERRESC3); + PIS(ERRCONTROL1); + PIS(ERRCONTROL2); + PIS(ERRCONTROL3); + PIS(STATEULPS1); + PIS(STATEULPS2); + PIS(STATEULPS3); + PIS(ERRCONTENTIONLP0_1); + PIS(ERRCONTENTIONLP1_1); + PIS(ERRCONTENTIONLP0_2); + PIS(ERRCONTENTIONLP1_2); + PIS(ERRCONTENTIONLP0_3); + PIS(ERRCONTENTIONLP1_3); + PIS(ULPSACTIVENOT_ALL0); + PIS(ULPSACTIVENOT_ALL1); +#undef PIS + + printk("\n"); +} + +static int debug_irq; + +/* called from dss */ +void dsi_irq_handler(void) +{ + u32 irqstatus, vcstatus, ciostatus; + int i; + + irqstatus = dsi_read_reg(DSI_IRQSTATUS); + + if (irqstatus & DSI_IRQ_ERROR_MASK) { + DSSERR("DSI error, irqstatus %x\n", irqstatus); + print_irq_status(irqstatus); + spin_lock(&dsi.errors_lock); + dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK; + spin_unlock(&dsi.errors_lock); + } else if (debug_irq) { + print_irq_status(irqstatus); + } + +#ifdef DSI_CATCH_MISSING_TE + if (irqstatus & DSI_IRQ_TE_TRIGGER) + del_timer(&dsi.te_timer); +#endif + + for (i = 0; i < 4; ++i) { + if ((irqstatus & (1<<i)) == 0) + continue; + + vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); + + if (vcstatus & DSI_VC_IRQ_BTA) + complete(&dsi.bta_completion); + + if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { + DSSERR("DSI VC(%d) error, vc irqstatus %x\n", + i, vcstatus); + print_irq_status_vc(i, vcstatus); + } else if (debug_irq) { + print_irq_status_vc(i, vcstatus); + } + + dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); + /* flush posted write */ + dsi_read_reg(DSI_VC_IRQSTATUS(i)); + } + + if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { + ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); + + dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); + /* flush posted write */ + dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); + + DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); + print_irq_status_cio(ciostatus); + } + + dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); + /* flush posted write */ + dsi_read_reg(DSI_IRQSTATUS); +} + + +static void _dsi_initialize_irq(void) +{ + u32 l; + int i; + + /* disable all interrupts */ + dsi_write_reg(DSI_IRQENABLE, 0); + for (i = 0; i < 4; ++i) + dsi_write_reg(DSI_VC_IRQENABLE(i), 0); + dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); + + /* clear interrupt status */ + l = dsi_read_reg(DSI_IRQSTATUS); + dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); + + for (i = 0; i < 4; ++i) { + l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); + dsi_write_reg(DSI_VC_IRQSTATUS(i), l); + } + + l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); + dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); + + /* enable error irqs */ + l = DSI_IRQ_ERROR_MASK; +#ifdef DSI_CATCH_MISSING_TE + l |= DSI_IRQ_TE_TRIGGER; +#endif + dsi_write_reg(DSI_IRQENABLE, l); + + l = DSI_VC_IRQ_ERROR_MASK; + for (i = 0; i < 4; ++i) + dsi_write_reg(DSI_VC_IRQENABLE(i), l); + + /* XXX zonda responds incorrectly, causing control error: + Exit from LP-ESC mode to LP11 uses wrong transition states on the + data lines LP0 and LN0. */ + dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, + -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); +} + +static u32 dsi_get_errors(void) +{ + unsigned long flags; + u32 e; + spin_lock_irqsave(&dsi.errors_lock, flags); + e = dsi.errors; + dsi.errors = 0; + spin_unlock_irqrestore(&dsi.errors_lock, flags); + return e; +} + +static void dsi_vc_enable_bta_irq(int channel) +{ + u32 l; + + dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA); + + l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); + l |= DSI_VC_IRQ_BTA; + dsi_write_reg(DSI_VC_IRQENABLE(channel), l); +} + +static void dsi_vc_disable_bta_irq(int channel) +{ + u32 l; + + l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); + l &= ~DSI_VC_IRQ_BTA; + dsi_write_reg(DSI_VC_IRQENABLE(channel), l); +} + +/* DSI func clock. this could also be DSI2_PLL_FCLK */ +static inline void enable_clocks(bool enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + else + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +/* source clock for DSI PLL. this could also be PCLKFREE */ +static inline void dsi_enable_pll_clock(bool enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_FCK2); + else + dss_clk_disable(DSS_CLK_FCK2); + + if (enable && dsi.pll_locked) { + if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) + DSSERR("cannot lock PLL when enabling clocks\n"); + } +} + +#ifdef DEBUG +static void _dsi_print_reset_status(void) +{ + u32 l; + + if (!dss_debug) + return; + + /* A dummy read using the SCP interface to any DSIPHY register is + * required after DSIPHY reset to complete the reset of the DSI complex + * I/O. */ + l = dsi_read_reg(DSI_DSIPHY_CFG5); + + printk(KERN_DEBUG "DSI resets: "); + + l = dsi_read_reg(DSI_PLL_STATUS); + printk("PLL (%d) ", FLD_GET(l, 0, 0)); + + l = dsi_read_reg(DSI_COMPLEXIO_CFG1); + printk("CIO (%d) ", FLD_GET(l, 29, 29)); + + l = dsi_read_reg(DSI_DSIPHY_CFG5); + printk("PHY (%x, %d, %d, %d)\n", + FLD_GET(l, 28, 26), + FLD_GET(l, 29, 29), + FLD_GET(l, 30, 30), + FLD_GET(l, 31, 31)); +} +#else +#define _dsi_print_reset_status() +#endif + +static inline int dsi_if_enable(bool enable) +{ + DSSDBG("dsi_if_enable(%d)\n", enable); + + enable = enable ? 1 : 0; + REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ + + if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { + DSSERR("Failed to set dsi_if_enable to %d\n", enable); + return -EIO; + } + + return 0; +} + +unsigned long dsi_get_dsi1_pll_rate(void) +{ + return dsi.current_cinfo.dsi1_pll_fclk; +} + +static unsigned long dsi_get_dsi2_pll_rate(void) +{ + return dsi.current_cinfo.dsi2_pll_fclk; +} + +static unsigned long dsi_get_txbyteclkhs(void) +{ + return dsi.current_cinfo.clkin4ddr / 16; +} + +static unsigned long dsi_fclk_rate(void) +{ + unsigned long r; + + if (dss_get_dsi_clk_source() == 0) { + /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ + r = dss_clk_get_rate(DSS_CLK_FCK1); + } else { + /* DSI FCLK source is DSI2_PLL_FCLK */ + r = dsi_get_dsi2_pll_rate(); + } + + return r; +} + +static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev) +{ + unsigned long dsi_fclk; + unsigned lp_clk_div; + unsigned long lp_clk; + + lp_clk_div = dssdev->phy.dsi.div.lp_clk_div; + + if (lp_clk_div == 0 || lp_clk_div > LP_DIV_MAX) + return -EINVAL; + + dsi_fclk = dsi_fclk_rate(); + + lp_clk = dsi_fclk / 2 / lp_clk_div; + + DSSDBG("LP_CLK_DIV %u, LP_CLK %lu\n", lp_clk_div, lp_clk); + dsi.current_cinfo.lp_clk = lp_clk; + dsi.current_cinfo.lp_clk_div = lp_clk_div; + + REG_FLD_MOD(DSI_CLK_CTRL, lp_clk_div, 12, 0); /* LP_CLK_DIVISOR */ + + REG_FLD_MOD(DSI_CLK_CTRL, dsi_fclk > 30000000 ? 1 : 0, + 21, 21); /* LP_RX_SYNCHRO_ENABLE */ + + return 0; +} + + +enum dsi_pll_power_state { + DSI_PLL_POWER_OFF = 0x0, + DSI_PLL_POWER_ON_HSCLK = 0x1, + DSI_PLL_POWER_ON_ALL = 0x2, + DSI_PLL_POWER_ON_DIV = 0x3, +}; + +static int dsi_pll_power(enum dsi_pll_power_state state) +{ + int t = 0; + + REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ + + /* PLL_PWR_STATUS */ + while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { + udelay(1); + if (t++ > 1000) { + DSSERR("Failed to set DSI PLL power mode to %d\n", + state); + return -ENODEV; + } + } + + return 0; +} + +/* calculate clock rates using dividers in cinfo */ +static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) +{ + if (cinfo->regn == 0 || cinfo->regn > REGN_MAX) + return -EINVAL; + + if (cinfo->regm == 0 || cinfo->regm > REGM_MAX) + return -EINVAL; + + if (cinfo->regm3 > REGM3_MAX) + return -EINVAL; + + if (cinfo->regm4 > REGM4_MAX) + return -EINVAL; + + if (cinfo->use_dss2_fck) { + cinfo->clkin = dss_clk_get_rate(DSS_CLK_FCK2); + /* XXX it is unclear if highfreq should be used + * with DSS2_FCK source also */ + cinfo->highfreq = 0; + } else { + cinfo->clkin = dispc_pclk_rate(); + + if (cinfo->clkin < 32000000) + cinfo->highfreq = 0; + else + cinfo->highfreq = 1; + } + + cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1)); + + if (cinfo->fint > FINT_MAX || cinfo->fint < FINT_MIN) + return -EINVAL; + + cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint; + + if (cinfo->clkin4ddr > 1800 * 1000 * 1000) + return -EINVAL; + + if (cinfo->regm3 > 0) + cinfo->dsi1_pll_fclk = cinfo->clkin4ddr / cinfo->regm3; + else + cinfo->dsi1_pll_fclk = 0; + + if (cinfo->regm4 > 0) + cinfo->dsi2_pll_fclk = cinfo->clkin4ddr / cinfo->regm4; + else + cinfo->dsi2_pll_fclk = 0; + + return 0; +} + +int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, + struct dsi_clock_info *dsi_cinfo, + struct dispc_clock_info *dispc_cinfo) +{ + struct dsi_clock_info cur, best; + struct dispc_clock_info best_dispc; + int min_fck_per_pck; + int match = 0; + unsigned long dss_clk_fck2; + + dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); + + if (req_pck == dsi.cache_req_pck && + dsi.cache_cinfo.clkin == dss_clk_fck2) { + DSSDBG("DSI clock info found from cache\n"); + *dsi_cinfo = dsi.cache_cinfo; + dispc_find_clk_divs(is_tft, req_pck, dsi_cinfo->dsi1_pll_fclk, + dispc_cinfo); + return 0; + } + + min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; + + if (min_fck_per_pck && + req_pck * min_fck_per_pck > DISPC_MAX_FCK) { + DSSERR("Requested pixel clock not possible with the current " + "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " + "the constraint off.\n"); + min_fck_per_pck = 0; + } + + DSSDBG("dsi_pll_calc\n"); + +retry: + memset(&best, 0, sizeof(best)); + memset(&best_dispc, 0, sizeof(best_dispc)); + + memset(&cur, 0, sizeof(cur)); + cur.clkin = dss_clk_fck2; + cur.use_dss2_fck = 1; + cur.highfreq = 0; + + /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ + /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ + /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ + for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { + if (cur.highfreq == 0) + cur.fint = cur.clkin / cur.regn; + else + cur.fint = cur.clkin / (2 * cur.regn); + + if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) + continue; + + /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ + for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { + unsigned long a, b; + + a = 2 * cur.regm * (cur.clkin/1000); + b = cur.regn * (cur.highfreq + 1); + cur.clkin4ddr = a / b * 1000; + + if (cur.clkin4ddr > 1800 * 1000 * 1000) + break; + + /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ + for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; + ++cur.regm3) { + struct dispc_clock_info cur_dispc; + cur.dsi1_pll_fclk = cur.clkin4ddr / cur.regm3; + + /* this will narrow down the search a bit, + * but still give pixclocks below what was + * requested */ + if (cur.dsi1_pll_fclk < req_pck) + break; + + if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) + continue; + + if (min_fck_per_pck && + cur.dsi1_pll_fclk < + req_pck * min_fck_per_pck) + continue; + + match = 1; + + dispc_find_clk_divs(is_tft, req_pck, + cur.dsi1_pll_fclk, + &cur_dispc); + + if (abs(cur_dispc.pck - req_pck) < + abs(best_dispc.pck - req_pck)) { + best = cur; + best_dispc = cur_dispc; + + if (cur_dispc.pck == req_pck) + goto found; + } + } + } + } +found: + if (!match) { + if (min_fck_per_pck) { + DSSERR("Could not find suitable clock settings.\n" + "Turning FCK/PCK constraint off and" + "trying again.\n"); + min_fck_per_pck = 0; + goto retry; + } + + DSSERR("Could not find suitable clock settings.\n"); + + return -EINVAL; + } + + /* DSI2_PLL_FCLK (regm4) is not used */ + best.regm4 = 0; + best.dsi2_pll_fclk = 0; + + if (dsi_cinfo) + *dsi_cinfo = best; + if (dispc_cinfo) + *dispc_cinfo = best_dispc; + + dsi.cache_req_pck = req_pck; + dsi.cache_clk_freq = 0; + dsi.cache_cinfo = best; + + return 0; +} + +int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo) +{ + int r = 0; + u32 l; + int f; + + DSSDBGF(); + + dsi.current_cinfo.fint = cinfo->fint; + dsi.current_cinfo.clkin4ddr = cinfo->clkin4ddr; + dsi.current_cinfo.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; + dsi.current_cinfo.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; + + dsi.current_cinfo.regn = cinfo->regn; + dsi.current_cinfo.regm = cinfo->regm; + dsi.current_cinfo.regm3 = cinfo->regm3; + dsi.current_cinfo.regm4 = cinfo->regm4; + + DSSDBG("DSI Fint %ld\n", cinfo->fint); + + DSSDBG("clkin (%s) rate %ld, highfreq %d\n", + cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", + cinfo->clkin, + cinfo->highfreq); + + /* DSIPHY == CLKIN4DDR */ + DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n", + cinfo->regm, + cinfo->regn, + cinfo->clkin, + cinfo->highfreq + 1, + cinfo->clkin4ddr); + + DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", + cinfo->clkin4ddr / 1000 / 1000 / 2); + + DSSDBG("Clock lane freq %ld Hz\n", cinfo->clkin4ddr / 4); + + DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", + cinfo->regm3, cinfo->dsi1_pll_fclk); + DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", + cinfo->regm4, cinfo->dsi2_pll_fclk); + + REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ + + l = dsi_read_reg(DSI_PLL_CONFIGURATION1); + l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ + l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ + l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ + l = FLD_MOD(l, cinfo->regm3 > 0 ? cinfo->regm3 - 1 : 0, + 22, 19); /* DSI_CLOCK_DIV */ + l = FLD_MOD(l, cinfo->regm4 > 0 ? cinfo->regm4 - 1 : 0, + 26, 23); /* DSIPROTO_CLOCK_DIV */ + dsi_write_reg(DSI_PLL_CONFIGURATION1, l); + + BUG_ON(cinfo->fint < 750000 || cinfo->fint > 2100000); + if (cinfo->fint < 1000000) + f = 0x3; + else if (cinfo->fint < 1250000) + f = 0x4; + else if (cinfo->fint < 1500000) + f = 0x5; + else if (cinfo->fint < 1750000) + f = 0x6; + else + f = 0x7; + + l = dsi_read_reg(DSI_PLL_CONFIGURATION2); + l = FLD_MOD(l, f, 4, 1); /* DSI_PLL_FREQSEL */ + l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, + 11, 11); /* DSI_PLL_CLKSEL */ + l = FLD_MOD(l, cinfo->highfreq, + 12, 12); /* DSI_PLL_HIGHFREQ */ + l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ + l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ + l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ + dsi_write_reg(DSI_PLL_CONFIGURATION2, l); + + REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ + + if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { + DSSERR("dsi pll go bit not going down.\n"); + r = -EIO; + goto err; + } + + if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { + DSSERR("cannot lock PLL\n"); + r = -EIO; + goto err; + } + + dsi.pll_locked = 1; + + l = dsi_read_reg(DSI_PLL_CONFIGURATION2); + l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ + l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ + l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ + l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ + l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ + l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ + l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ + l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ + l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ + l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ + l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ + l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ + l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ + l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ + dsi_write_reg(DSI_PLL_CONFIGURATION2, l); + + DSSDBG("PLL config done\n"); +err: + return r; +} + +int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, + bool enable_hsdiv) +{ + int r = 0; + enum dsi_pll_power_state pwstate; + + DSSDBG("PLL init\n"); + + enable_clocks(1); + dsi_enable_pll_clock(1); + + r = regulator_enable(dsi.vdds_dsi_reg); + if (r) + goto err0; + + /* XXX PLL does not come out of reset without this... */ + dispc_pck_free_enable(1); + + if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { + DSSERR("PLL not coming out of reset.\n"); + r = -ENODEV; + goto err1; + } + + /* XXX ... but if left on, we get problems when planes do not + * fill the whole display. No idea about this */ + dispc_pck_free_enable(0); + + if (enable_hsclk && enable_hsdiv) + pwstate = DSI_PLL_POWER_ON_ALL; + else if (enable_hsclk) + pwstate = DSI_PLL_POWER_ON_HSCLK; + else if (enable_hsdiv) + pwstate = DSI_PLL_POWER_ON_DIV; + else + pwstate = DSI_PLL_POWER_OFF; + + r = dsi_pll_power(pwstate); + + if (r) + goto err1; + + DSSDBG("PLL init done\n"); + + return 0; +err1: + regulator_disable(dsi.vdds_dsi_reg); +err0: + enable_clocks(0); + dsi_enable_pll_clock(0); + return r; +} + +void dsi_pll_uninit(void) +{ + enable_clocks(0); + dsi_enable_pll_clock(0); + + dsi.pll_locked = 0; + dsi_pll_power(DSI_PLL_POWER_OFF); + regulator_disable(dsi.vdds_dsi_reg); + DSSDBG("PLL uninit done\n"); +} + +void dsi_dump_clocks(struct seq_file *s) +{ + int clksel; + struct dsi_clock_info *cinfo = &dsi.current_cinfo; + + enable_clocks(1); + + clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); + + seq_printf(s, "- DSI PLL -\n"); + + seq_printf(s, "dsi pll source = %s\n", + clksel == 0 ? + "dss2_alwon_fclk" : "pclkfree"); + + seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn); + + seq_printf(s, "CLKIN4DDR\t%-16luregm %u\n", + cinfo->clkin4ddr, cinfo->regm); + + seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n", + cinfo->dsi1_pll_fclk, + cinfo->regm3, + dss_get_dispc_clk_source() == 0 ? "off" : "on"); + + seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n", + cinfo->dsi2_pll_fclk, + cinfo->regm4, + dss_get_dsi_clk_source() == 0 ? "off" : "on"); + + seq_printf(s, "- DSI -\n"); + + seq_printf(s, "dsi fclk source = %s\n", + dss_get_dsi_clk_source() == 0 ? + "dss1_alwon_fclk" : "dsi2_pll_fclk"); + + seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate()); + + seq_printf(s, "DDR_CLK\t\t%lu\n", + cinfo->clkin4ddr / 4); + + seq_printf(s, "TxByteClkHS\t%lu\n", dsi_get_txbyteclkhs()); + + seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk); + + seq_printf(s, "VP_CLK\t\t%lu\n" + "VP_PCLK\t\t%lu\n", + dispc_lclk_rate(), + dispc_pclk_rate()); + + enable_clocks(0); +} + +void dsi_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + DUMPREG(DSI_REVISION); + DUMPREG(DSI_SYSCONFIG); + DUMPREG(DSI_SYSSTATUS); + DUMPREG(DSI_IRQSTATUS); + DUMPREG(DSI_IRQENABLE); + DUMPREG(DSI_CTRL); + DUMPREG(DSI_COMPLEXIO_CFG1); + DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); + DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); + DUMPREG(DSI_CLK_CTRL); + DUMPREG(DSI_TIMING1); + DUMPREG(DSI_TIMING2); + DUMPREG(DSI_VM_TIMING1); + DUMPREG(DSI_VM_TIMING2); + DUMPREG(DSI_VM_TIMING3); + DUMPREG(DSI_CLK_TIMING); + DUMPREG(DSI_TX_FIFO_VC_SIZE); + DUMPREG(DSI_RX_FIFO_VC_SIZE); + DUMPREG(DSI_COMPLEXIO_CFG2); + DUMPREG(DSI_RX_FIFO_VC_FULLNESS); + DUMPREG(DSI_VM_TIMING4); + DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); + DUMPREG(DSI_VM_TIMING5); + DUMPREG(DSI_VM_TIMING6); + DUMPREG(DSI_VM_TIMING7); + DUMPREG(DSI_STOPCLK_TIMING); + + DUMPREG(DSI_VC_CTRL(0)); + DUMPREG(DSI_VC_TE(0)); + DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); + DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); + DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); + DUMPREG(DSI_VC_IRQSTATUS(0)); + DUMPREG(DSI_VC_IRQENABLE(0)); + + DUMPREG(DSI_VC_CTRL(1)); + DUMPREG(DSI_VC_TE(1)); + DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); + DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); + DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); + DUMPREG(DSI_VC_IRQSTATUS(1)); + DUMPREG(DSI_VC_IRQENABLE(1)); + + DUMPREG(DSI_VC_CTRL(2)); + DUMPREG(DSI_VC_TE(2)); + DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); + DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); + DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); + DUMPREG(DSI_VC_IRQSTATUS(2)); + DUMPREG(DSI_VC_IRQENABLE(2)); + + DUMPREG(DSI_VC_CTRL(3)); + DUMPREG(DSI_VC_TE(3)); + DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); + DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); + DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); + DUMPREG(DSI_VC_IRQSTATUS(3)); + DUMPREG(DSI_VC_IRQENABLE(3)); + + DUMPREG(DSI_DSIPHY_CFG0); + DUMPREG(DSI_DSIPHY_CFG1); + DUMPREG(DSI_DSIPHY_CFG2); + DUMPREG(DSI_DSIPHY_CFG5); + + DUMPREG(DSI_PLL_CONTROL); + DUMPREG(DSI_PLL_STATUS); + DUMPREG(DSI_PLL_GO); + DUMPREG(DSI_PLL_CONFIGURATION1); + DUMPREG(DSI_PLL_CONFIGURATION2); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +#undef DUMPREG +} + +enum dsi_complexio_power_state { + DSI_COMPLEXIO_POWER_OFF = 0x0, + DSI_COMPLEXIO_POWER_ON = 0x1, + DSI_COMPLEXIO_POWER_ULPS = 0x2, +}; + +static int dsi_complexio_power(enum dsi_complexio_power_state state) +{ + int t = 0; + + /* PWR_CMD */ + REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); + + /* PWR_STATUS */ + while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { + udelay(1); + if (t++ > 1000) { + DSSERR("failed to set complexio power state to " + "%d\n", state); + return -ENODEV; + } + } + + return 0; +} + +static void dsi_complexio_config(struct omap_dss_device *dssdev) +{ + u32 r; + + int clk_lane = dssdev->phy.dsi.clk_lane; + int data1_lane = dssdev->phy.dsi.data1_lane; + int data2_lane = dssdev->phy.dsi.data2_lane; + int clk_pol = dssdev->phy.dsi.clk_pol; + int data1_pol = dssdev->phy.dsi.data1_pol; + int data2_pol = dssdev->phy.dsi.data2_pol; + + r = dsi_read_reg(DSI_COMPLEXIO_CFG1); + r = FLD_MOD(r, clk_lane, 2, 0); + r = FLD_MOD(r, clk_pol, 3, 3); + r = FLD_MOD(r, data1_lane, 6, 4); + r = FLD_MOD(r, data1_pol, 7, 7); + r = FLD_MOD(r, data2_lane, 10, 8); + r = FLD_MOD(r, data2_pol, 11, 11); + dsi_write_reg(DSI_COMPLEXIO_CFG1, r); + + /* The configuration of the DSI complex I/O (number of data lanes, + position, differential order) should not be changed while + DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for + the hardware to take into account a new configuration of the complex + I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to + follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, + then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set + DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the + DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the + DSI complex I/O configuration is unknown. */ + + /* + REG_FLD_MOD(DSI_CTRL, 1, 0, 0); + REG_FLD_MOD(DSI_CTRL, 0, 0, 0); + REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); + REG_FLD_MOD(DSI_CTRL, 1, 0, 0); + */ +} + +static inline unsigned ns2ddr(unsigned ns) +{ + /* convert time in ns to ddr ticks, rounding up */ + unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; + return (ns * (ddr_clk / 1000 / 1000) + 999) / 1000; +} + +static inline unsigned ddr2ns(unsigned ddr) +{ + unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; + return ddr * 1000 * 1000 / (ddr_clk / 1000); +} + +static void dsi_complexio_timings(void) +{ + u32 r; + u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; + u32 tlpx_half, tclk_trail, tclk_zero; + u32 tclk_prepare; + + /* calculate timings */ + + /* 1 * DDR_CLK = 2 * UI */ + + /* min 40ns + 4*UI max 85ns + 6*UI */ + ths_prepare = ns2ddr(70) + 2; + + /* min 145ns + 10*UI */ + ths_prepare_ths_zero = ns2ddr(175) + 2; + + /* min max(8*UI, 60ns+4*UI) */ + ths_trail = ns2ddr(60) + 5; + + /* min 100ns */ + ths_exit = ns2ddr(145); + + /* tlpx min 50n */ + tlpx_half = ns2ddr(25); + + /* min 60ns */ + tclk_trail = ns2ddr(60) + 2; + + /* min 38ns, max 95ns */ + tclk_prepare = ns2ddr(65); + + /* min tclk-prepare + tclk-zero = 300ns */ + tclk_zero = ns2ddr(260); + + DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", + ths_prepare, ddr2ns(ths_prepare), + ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); + DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", + ths_trail, ddr2ns(ths_trail), + ths_exit, ddr2ns(ths_exit)); + + DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " + "tclk_zero %u (%uns)\n", + tlpx_half, ddr2ns(tlpx_half), + tclk_trail, ddr2ns(tclk_trail), + tclk_zero, ddr2ns(tclk_zero)); + DSSDBG("tclk_prepare %u (%uns)\n", + tclk_prepare, ddr2ns(tclk_prepare)); + + /* program timings */ + + r = dsi_read_reg(DSI_DSIPHY_CFG0); + r = FLD_MOD(r, ths_prepare, 31, 24); + r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); + r = FLD_MOD(r, ths_trail, 15, 8); + r = FLD_MOD(r, ths_exit, 7, 0); + dsi_write_reg(DSI_DSIPHY_CFG0, r); + + r = dsi_read_reg(DSI_DSIPHY_CFG1); + r = FLD_MOD(r, tlpx_half, 22, 16); + r = FLD_MOD(r, tclk_trail, 15, 8); + r = FLD_MOD(r, tclk_zero, 7, 0); + dsi_write_reg(DSI_DSIPHY_CFG1, r); + + r = dsi_read_reg(DSI_DSIPHY_CFG2); + r = FLD_MOD(r, tclk_prepare, 7, 0); + dsi_write_reg(DSI_DSIPHY_CFG2, r); +} + + +static int dsi_complexio_init(struct omap_dss_device *dssdev) +{ + int r = 0; + + DSSDBG("dsi_complexio_init\n"); + + /* CIO_CLK_ICG, enable L3 clk to CIO */ + REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); + + /* A dummy read using the SCP interface to any DSIPHY register is + * required after DSIPHY reset to complete the reset of the DSI complex + * I/O. */ + dsi_read_reg(DSI_DSIPHY_CFG5); + + if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { + DSSERR("ComplexIO PHY not coming out of reset.\n"); + r = -ENODEV; + goto err; + } + + dsi_complexio_config(dssdev); + + r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); + + if (r) + goto err; + + if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { + DSSERR("ComplexIO not coming out of reset.\n"); + r = -ENODEV; + goto err; + } + + if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { + DSSERR("ComplexIO LDO power down.\n"); + r = -ENODEV; + goto err; + } + + dsi_complexio_timings(); + + /* + The configuration of the DSI complex I/O (number of data lanes, + position, differential order) should not be changed while + DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the + hardware to recognize a new configuration of the complex I/O (done + in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow + this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next + reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] + LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN + bit to 1. If the sequence is not followed, the DSi complex I/O + configuration is undetermined. + */ + dsi_if_enable(1); + dsi_if_enable(0); + REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ + dsi_if_enable(1); + dsi_if_enable(0); + + DSSDBG("CIO init done\n"); +err: + return r; +} + +static void dsi_complexio_uninit(void) +{ + dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); +} + +static int _dsi_wait_reset(void) +{ + int i = 0; + + while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { + if (i++ > 5) { + DSSERR("soft reset failed\n"); + return -ENODEV; + } + udelay(1); + } + + return 0; +} + +static int _dsi_reset(void) +{ + /* Soft reset */ + REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); + return _dsi_wait_reset(); +} + +static void dsi_reset_tx_fifo(int channel) +{ + u32 mask; + u32 l; + + /* set fifosize of the channel to 0, then return the old size */ + l = dsi_read_reg(DSI_TX_FIFO_VC_SIZE); + + mask = FLD_MASK((8 * channel) + 7, (8 * channel) + 4); + dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l & ~mask); + + dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l); +} + +static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, + enum fifo_size size3, enum fifo_size size4) +{ + u32 r = 0; + int add = 0; + int i; + + dsi.vc[0].fifo_size = size1; + dsi.vc[1].fifo_size = size2; + dsi.vc[2].fifo_size = size3; + dsi.vc[3].fifo_size = size4; + + for (i = 0; i < 4; i++) { + u8 v; + int size = dsi.vc[i].fifo_size; + + if (add + size > 4) { + DSSERR("Illegal FIFO configuration\n"); + BUG(); + } + + v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); + r |= v << (8 * i); + /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ + add += size; + } + + dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); +} + +static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, + enum fifo_size size3, enum fifo_size size4) +{ + u32 r = 0; + int add = 0; + int i; + + dsi.vc[0].fifo_size = size1; + dsi.vc[1].fifo_size = size2; + dsi.vc[2].fifo_size = size3; + dsi.vc[3].fifo_size = size4; + + for (i = 0; i < 4; i++) { + u8 v; + int size = dsi.vc[i].fifo_size; + + if (add + size > 4) { + DSSERR("Illegal FIFO configuration\n"); + BUG(); + } + + v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); + r |= v << (8 * i); + /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ + add += size; + } + + dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); +} + +static int dsi_force_tx_stop_mode_io(void) +{ + u32 r; + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ + dsi_write_reg(DSI_TIMING1, r); + + if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { + DSSERR("TX_STOP bit not going down\n"); + return -EIO; + } + + return 0; +} + +static void dsi_vc_print_status(int channel) +{ + u32 r; + + r = dsi_read_reg(DSI_VC_CTRL(channel)); + DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " + "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", + channel, + FLD_GET(r, 5, 5), + FLD_GET(r, 6, 6), + FLD_GET(r, 15, 15), + FLD_GET(r, 16, 16), + FLD_GET(r, 20, 20)); + + r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); + DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); +} + +static int dsi_vc_enable(int channel, bool enable) +{ + if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) + DSSDBG("dsi_vc_enable channel %d, enable %d\n", + channel, enable); + + enable = enable ? 1 : 0; + + REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); + + if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { + DSSERR("Failed to set dsi_vc_enable to %d\n", enable); + return -EIO; + } + + return 0; +} + +static void dsi_vc_initial_config(int channel) +{ + u32 r; + + DSSDBGF("%d", channel); + + r = dsi_read_reg(DSI_VC_CTRL(channel)); + + if (FLD_GET(r, 15, 15)) /* VC_BUSY */ + DSSERR("VC(%d) busy when trying to configure it!\n", + channel); + + r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ + r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ + r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ + r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ + r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ + r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ + r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ + + r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ + r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ + + dsi_write_reg(DSI_VC_CTRL(channel), r); + + dsi.vc[channel].mode = DSI_VC_MODE_L4; +} + +static void dsi_vc_config_l4(int channel) +{ + if (dsi.vc[channel].mode == DSI_VC_MODE_L4) + return; + + DSSDBGF("%d", channel); + + dsi_vc_enable(channel, 0); + + if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ + DSSERR("vc(%d) busy when trying to config for L4\n", channel); + + REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ + + dsi_vc_enable(channel, 1); + + dsi.vc[channel].mode = DSI_VC_MODE_L4; +} + +static void dsi_vc_config_vp(int channel) +{ + if (dsi.vc[channel].mode == DSI_VC_MODE_VP) + return; + + DSSDBGF("%d", channel); + + dsi_vc_enable(channel, 0); + + if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ + DSSERR("vc(%d) busy when trying to config for VP\n", channel); + + REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ + + dsi_vc_enable(channel, 1); + + dsi.vc[channel].mode = DSI_VC_MODE_VP; +} + + +static void dsi_vc_enable_hs(int channel, bool enable) +{ + DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); + + dsi_vc_enable(channel, 0); + dsi_if_enable(0); + + REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); + + dsi_vc_enable(channel, 1); + dsi_if_enable(1); + + dsi_force_tx_stop_mode_io(); +} + +static void dsi_vc_flush_long_data(int channel) +{ + while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + u32 val; + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", + (val >> 0) & 0xff, + (val >> 8) & 0xff, + (val >> 16) & 0xff, + (val >> 24) & 0xff); + } +} + +static void dsi_show_rx_ack_with_err(u16 err) +{ + DSSERR("\tACK with ERROR (%#x):\n", err); + if (err & (1 << 0)) + DSSERR("\t\tSoT Error\n"); + if (err & (1 << 1)) + DSSERR("\t\tSoT Sync Error\n"); + if (err & (1 << 2)) + DSSERR("\t\tEoT Sync Error\n"); + if (err & (1 << 3)) + DSSERR("\t\tEscape Mode Entry Command Error\n"); + if (err & (1 << 4)) + DSSERR("\t\tLP Transmit Sync Error\n"); + if (err & (1 << 5)) + DSSERR("\t\tHS Receive Timeout Error\n"); + if (err & (1 << 6)) + DSSERR("\t\tFalse Control Error\n"); + if (err & (1 << 7)) + DSSERR("\t\t(reserved7)\n"); + if (err & (1 << 8)) + DSSERR("\t\tECC Error, single-bit (corrected)\n"); + if (err & (1 << 9)) + DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); + if (err & (1 << 10)) + DSSERR("\t\tChecksum Error\n"); + if (err & (1 << 11)) + DSSERR("\t\tData type not recognized\n"); + if (err & (1 << 12)) + DSSERR("\t\tInvalid VC ID\n"); + if (err & (1 << 13)) + DSSERR("\t\tInvalid Transmission Length\n"); + if (err & (1 << 14)) + DSSERR("\t\t(reserved14)\n"); + if (err & (1 << 15)) + DSSERR("\t\tDSI Protocol Violation\n"); +} + +static u16 dsi_vc_flush_receive_data(int channel) +{ + /* RX_FIFO_NOT_EMPTY */ + while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + u32 val; + u8 dt; + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + DSSDBG("\trawval %#08x\n", val); + dt = FLD_GET(val, 5, 0); + if (dt == DSI_DT_RX_ACK_WITH_ERR) { + u16 err = FLD_GET(val, 23, 8); + dsi_show_rx_ack_with_err(err); + } else if (dt == DSI_DT_RX_SHORT_READ_1) { + DSSDBG("\tDCS short response, 1 byte: %#x\n", + FLD_GET(val, 23, 8)); + } else if (dt == DSI_DT_RX_SHORT_READ_2) { + DSSDBG("\tDCS short response, 2 byte: %#x\n", + FLD_GET(val, 23, 8)); + } else if (dt == DSI_DT_RX_DCS_LONG_READ) { + DSSDBG("\tDCS long response, len %d\n", + FLD_GET(val, 23, 8)); + dsi_vc_flush_long_data(channel); + } else { + DSSERR("\tunknown datatype 0x%02x\n", dt); + } + } + return 0; +} + +static int dsi_vc_send_bta(int channel) +{ + if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO && + (dsi.debug_write || dsi.debug_read)) + DSSDBG("dsi_vc_send_bta %d\n", channel); + + WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + + if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ + DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); + dsi_vc_flush_receive_data(channel); + } + + REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ + + return 0; +} + +int dsi_vc_send_bta_sync(int channel) +{ + int r = 0; + u32 err; + + INIT_COMPLETION(dsi.bta_completion); + + dsi_vc_enable_bta_irq(channel); + + r = dsi_vc_send_bta(channel); + if (r) + goto err; + + if (wait_for_completion_timeout(&dsi.bta_completion, + msecs_to_jiffies(500)) == 0) { + DSSERR("Failed to receive BTA\n"); + r = -EIO; + goto err; + } + + err = dsi_get_errors(); + if (err) { + DSSERR("Error while sending BTA: %x\n", err); + r = -EIO; + goto err; + } +err: + dsi_vc_disable_bta_irq(channel); + + return r; +} +EXPORT_SYMBOL(dsi_vc_send_bta_sync); + +static inline void dsi_vc_write_long_header(int channel, u8 data_type, + u16 len, u8 ecc) +{ + u32 val; + u8 data_id; + + WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + + /*data_id = data_type | channel << 6; */ + data_id = data_type | dsi.vc[channel].dest_per << 6; + + val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | + FLD_VAL(ecc, 31, 24); + + dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); +} + +static inline void dsi_vc_write_long_payload(int channel, + u8 b1, u8 b2, u8 b3, u8 b4) +{ + u32 val; + + val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; + +/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", + b1, b2, b3, b4, val); */ + + dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); +} + +static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, + u8 ecc) +{ + /*u32 val; */ + int i; + u8 *p; + int r = 0; + u8 b1, b2, b3, b4; + + if (dsi.debug_write) + DSSDBG("dsi_vc_send_long, %d bytes\n", len); + + /* len + header */ + if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { + DSSERR("unable to send long packet: packet too long.\n"); + return -EINVAL; + } + + dsi_vc_config_l4(channel); + + dsi_vc_write_long_header(channel, data_type, len, ecc); + + /*dsi_vc_print_status(0); */ + + p = data; + for (i = 0; i < len >> 2; i++) { + if (dsi.debug_write) + DSSDBG("\tsending full packet %d\n", i); + /*dsi_vc_print_status(0); */ + + b1 = *p++; + b2 = *p++; + b3 = *p++; + b4 = *p++; + + dsi_vc_write_long_payload(channel, b1, b2, b3, b4); + } + + i = len % 4; + if (i) { + b1 = 0; b2 = 0; b3 = 0; + + if (dsi.debug_write) + DSSDBG("\tsending remainder bytes %d\n", i); + + switch (i) { + case 3: + b1 = *p++; + b2 = *p++; + b3 = *p++; + break; + case 2: + b1 = *p++; + b2 = *p++; + break; + case 1: + b1 = *p++; + break; + } + + dsi_vc_write_long_payload(channel, b1, b2, b3, 0); + } + + return r; +} + +static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) +{ + u32 r; + u8 data_id; + + WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + + if (dsi.debug_write) + DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", + channel, + data_type, data & 0xff, (data >> 8) & 0xff); + + dsi_vc_config_l4(channel); + + if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { + DSSERR("ERROR FIFO FULL, aborting transfer\n"); + return -EINVAL; + } + + data_id = data_type | channel << 6; + + r = (data_id << 0) | (data << 8) | (ecc << 24); + + dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); + + return 0; +} + +int dsi_vc_send_null(int channel) +{ + u8 nullpkg[] = {0, 0, 0, 0}; + return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); +} +EXPORT_SYMBOL(dsi_vc_send_null); + +int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) +{ + int r; + + BUG_ON(len == 0); + + if (len == 1) { + r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, + data[0], 0); + } else if (len == 2) { + r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, + data[0] | (data[1] << 8), 0); + } else { + /* 0x39 = DCS Long Write */ + r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, + data, len, 0); + } + + return r; +} +EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); + +int dsi_vc_dcs_write(int channel, u8 *data, int len) +{ + int r; + + r = dsi_vc_dcs_write_nosync(channel, data, len); + if (r) + return r; + + r = dsi_vc_send_bta_sync(channel); + + return r; +} +EXPORT_SYMBOL(dsi_vc_dcs_write); + +int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) +{ + u32 val; + u8 dt; + int r; + + if (dsi.debug_read) + DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %u)\n", channel, dcs_cmd); + + r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); + if (r) + return r; + + r = dsi_vc_send_bta_sync(channel); + if (r) + return r; + + /* RX_FIFO_NOT_EMPTY */ + if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { + DSSERR("RX fifo empty when trying to read.\n"); + return -EIO; + } + + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + if (dsi.debug_read) + DSSDBG("\theader: %08x\n", val); + dt = FLD_GET(val, 5, 0); + if (dt == DSI_DT_RX_ACK_WITH_ERR) { + u16 err = FLD_GET(val, 23, 8); + dsi_show_rx_ack_with_err(err); + return -EIO; + + } else if (dt == DSI_DT_RX_SHORT_READ_1) { + u8 data = FLD_GET(val, 15, 8); + if (dsi.debug_read) + DSSDBG("\tDCS short response, 1 byte: %02x\n", data); + + if (buflen < 1) + return -EIO; + + buf[0] = data; + + return 1; + } else if (dt == DSI_DT_RX_SHORT_READ_2) { + u16 data = FLD_GET(val, 23, 8); + if (dsi.debug_read) + DSSDBG("\tDCS short response, 2 byte: %04x\n", data); + + if (buflen < 2) + return -EIO; + + buf[0] = data & 0xff; + buf[1] = (data >> 8) & 0xff; + + return 2; + } else if (dt == DSI_DT_RX_DCS_LONG_READ) { + int w; + int len = FLD_GET(val, 23, 8); + if (dsi.debug_read) + DSSDBG("\tDCS long response, len %d\n", len); + + if (len > buflen) + return -EIO; + + /* two byte checksum ends the packet, not included in len */ + for (w = 0; w < len + 2;) { + int b; + val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); + if (dsi.debug_read) + DSSDBG("\t\t%02x %02x %02x %02x\n", + (val >> 0) & 0xff, + (val >> 8) & 0xff, + (val >> 16) & 0xff, + (val >> 24) & 0xff); + + for (b = 0; b < 4; ++b) { + if (w < len) + buf[w] = (val >> (b * 8)) & 0xff; + /* we discard the 2 byte checksum */ + ++w; + } + } + + return len; + + } else { + DSSERR("\tunknown datatype 0x%02x\n", dt); + return -EIO; + } +} +EXPORT_SYMBOL(dsi_vc_dcs_read); + + +int dsi_vc_set_max_rx_packet_size(int channel, u16 len) +{ + int r; + r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, + len, 0); + + if (r) + return r; + + r = dsi_vc_send_bta_sync(channel); + + return r; +} +EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); + +static void dsi_set_lp_rx_timeout(unsigned long ns) +{ + u32 r; + unsigned x4, x16; + unsigned long fck; + unsigned long ticks; + + /* ticks in DSI_FCK */ + + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + x4 = 0; + x16 = 0; + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 4; + x4 = 1; + x16 = 0; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 16; + x4 = 0; + x16 = 1; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); + x4 = 1; + x16 = 1; + } + + if (ticks > 0x1fff) { + DSSWARN("LP_TX_TO over limit, setting it to max\n"); + ticks = 0x1fff; + x4 = 1; + x16 = 1; + } + + r = dsi_read_reg(DSI_TIMING2); + r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ + r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ + r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ + r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ + dsi_write_reg(DSI_TIMING2, r); + + DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks, x4 ? " x4" : "", x16 ? " x16" : ""); +} + +static void dsi_set_ta_timeout(unsigned long ns) +{ + u32 r; + unsigned x8, x16; + unsigned long fck; + unsigned long ticks; + + /* ticks in DSI_FCK */ + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + x8 = 0; + x16 = 0; + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 8; + x8 = 1; + x16 = 0; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 16; + x8 = 0; + x16 = 1; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16); + x8 = 1; + x16 = 1; + } + + if (ticks > 0x1fff) { + DSSWARN("TA_TO over limit, setting it to max\n"); + ticks = 0x1fff; + x8 = 1; + x16 = 1; + } + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ + r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ + r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ + r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ + dsi_write_reg(DSI_TIMING1, r); + + DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n", + (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / + (fck / 1000 / 1000), + ticks, x8 ? " x8" : "", x16 ? " x16" : ""); +} + +static void dsi_set_stop_state_counter(unsigned long ns) +{ + u32 r; + unsigned x4, x16; + unsigned long fck; + unsigned long ticks; + + /* ticks in DSI_FCK */ + + fck = dsi_fclk_rate(); + ticks = (fck / 1000 / 1000) * ns / 1000; + x4 = 0; + x16 = 0; + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 4; + x4 = 1; + x16 = 0; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 16; + x4 = 0; + x16 = 1; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); + x4 = 1; + x16 = 1; + } + + if (ticks > 0x1fff) { + DSSWARN("STOP_STATE_COUNTER_IO over limit, " + "setting it to max\n"); + ticks = 0x1fff; + x4 = 1; + x16 = 1; + } + + r = dsi_read_reg(DSI_TIMING1); + r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ + r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ + r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ + r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ + dsi_write_reg(DSI_TIMING1, r); + + DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks, x4 ? " x4" : "", x16 ? " x16" : ""); +} + +static void dsi_set_hs_tx_timeout(unsigned long ns) +{ + u32 r; + unsigned x4, x16; + unsigned long fck; + unsigned long ticks; + + /* ticks in TxByteClkHS */ + + fck = dsi_get_txbyteclkhs(); + ticks = (fck / 1000 / 1000) * ns / 1000; + x4 = 0; + x16 = 0; + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 4; + x4 = 1; + x16 = 0; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / 16; + x4 = 0; + x16 = 1; + } + + if (ticks > 0x1fff) { + ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); + x4 = 1; + x16 = 1; + } + + if (ticks > 0x1fff) { + DSSWARN("HS_TX_TO over limit, setting it to max\n"); + ticks = 0x1fff; + x4 = 1; + x16 = 1; + } + + r = dsi_read_reg(DSI_TIMING2); + r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ + r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ + r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ + r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ + dsi_write_reg(DSI_TIMING2, r); + + DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n", + (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / + (fck / 1000 / 1000), + ticks, x4 ? " x4" : "", x16 ? " x16" : ""); +} +static int dsi_proto_config(struct omap_dss_device *dssdev) +{ + u32 r; + int buswidth = 0; + + dsi_config_tx_fifo(DSI_FIFO_SIZE_128, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0); + + dsi_config_rx_fifo(DSI_FIFO_SIZE_128, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0, + DSI_FIFO_SIZE_0); + + /* XXX what values for the timeouts? */ + dsi_set_stop_state_counter(1000); + dsi_set_ta_timeout(6400000); + dsi_set_lp_rx_timeout(48000); + dsi_set_hs_tx_timeout(1000000); + + switch (dssdev->ctrl.pixel_size) { + case 16: + buswidth = 0; + break; + case 18: + buswidth = 1; + break; + case 24: + buswidth = 2; + break; + default: + BUG(); + } + + r = dsi_read_reg(DSI_CTRL); + r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ + r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ + r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ + r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/ + r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ + r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ + r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ + r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ + r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ + r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ + r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ + + dsi_write_reg(DSI_CTRL, r); + + dsi_vc_initial_config(0); + + /* set all vc targets to peripheral 0 */ + dsi.vc[0].dest_per = 0; + dsi.vc[1].dest_per = 0; + dsi.vc[2].dest_per = 0; + dsi.vc[3].dest_per = 0; + + return 0; +} + +static void dsi_proto_timings(struct omap_dss_device *dssdev) +{ + unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; + unsigned tclk_pre, tclk_post; + unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; + unsigned ths_trail, ths_exit; + unsigned ddr_clk_pre, ddr_clk_post; + unsigned enter_hs_mode_lat, exit_hs_mode_lat; + unsigned ths_eot; + u32 r; + + r = dsi_read_reg(DSI_DSIPHY_CFG0); + ths_prepare = FLD_GET(r, 31, 24); + ths_prepare_ths_zero = FLD_GET(r, 23, 16); + ths_zero = ths_prepare_ths_zero - ths_prepare; + ths_trail = FLD_GET(r, 15, 8); + ths_exit = FLD_GET(r, 7, 0); + + r = dsi_read_reg(DSI_DSIPHY_CFG1); + tlpx = FLD_GET(r, 22, 16) * 2; + tclk_trail = FLD_GET(r, 15, 8); + tclk_zero = FLD_GET(r, 7, 0); + + r = dsi_read_reg(DSI_DSIPHY_CFG2); + tclk_prepare = FLD_GET(r, 7, 0); + + /* min 8*UI */ + tclk_pre = 20; + /* min 60ns + 52*UI */ + tclk_post = ns2ddr(60) + 26; + + /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */ + if (dssdev->phy.dsi.data1_lane != 0 && + dssdev->phy.dsi.data2_lane != 0) + ths_eot = 2; + else + ths_eot = 4; + + ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare, + 4); + ddr_clk_post = DIV_ROUND_UP(tclk_post + ths_trail, 4) + ths_eot; + + BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255); + BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255); + + r = dsi_read_reg(DSI_CLK_TIMING); + r = FLD_MOD(r, ddr_clk_pre, 15, 8); + r = FLD_MOD(r, ddr_clk_post, 7, 0); + dsi_write_reg(DSI_CLK_TIMING, r); + + DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n", + ddr_clk_pre, + ddr_clk_post); + + enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) + + DIV_ROUND_UP(ths_prepare, 4) + + DIV_ROUND_UP(ths_zero + 3, 4); + + exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot; + + r = FLD_VAL(enter_hs_mode_lat, 31, 16) | + FLD_VAL(exit_hs_mode_lat, 15, 0); + dsi_write_reg(DSI_VM_TIMING7, r); + + DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n", + enter_hs_mode_lat, exit_hs_mode_lat); +} + + +#define DSI_DECL_VARS \ + int __dsi_cb = 0; u32 __dsi_cv = 0; + +#define DSI_FLUSH(ch) \ + if (__dsi_cb > 0) { \ + /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ + dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ + __dsi_cb = __dsi_cv = 0; \ + } + +#define DSI_PUSH(ch, data) \ + do { \ + __dsi_cv |= (data) << (__dsi_cb * 8); \ + /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ + if (++__dsi_cb > 3) \ + DSI_FLUSH(ch); \ + } while (0) + +static int dsi_update_screen_l4(struct omap_dss_device *dssdev, + int x, int y, int w, int h) +{ + /* Note: supports only 24bit colors in 32bit container */ + int first = 1; + int fifo_stalls = 0; + int max_dsi_packet_size; + int max_data_per_packet; + int max_pixels_per_packet; + int pixels_left; + int bytespp = dssdev->ctrl.pixel_size / 8; + int scr_width; + u32 __iomem *data; + int start_offset; + int horiz_inc; + int current_x; + struct omap_overlay *ovl; + + debug_irq = 0; + + DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", + x, y, w, h); + + ovl = dssdev->manager->overlays[0]; + + if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) + return -EINVAL; + + if (dssdev->ctrl.pixel_size != 24) + return -EINVAL; + + scr_width = ovl->info.screen_width; + data = ovl->info.vaddr; + + start_offset = scr_width * y + x; + horiz_inc = scr_width - w; + current_x = x; + + /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes + * in fifo */ + + /* When using CPU, max long packet size is TX buffer size */ + max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; + + /* we seem to get better perf if we divide the tx fifo to half, + and while the other half is being sent, we fill the other half + max_dsi_packet_size /= 2; */ + + max_data_per_packet = max_dsi_packet_size - 4 - 1; + + max_pixels_per_packet = max_data_per_packet / bytespp; + + DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); + + pixels_left = w * h; + + DSSDBG("total pixels %d\n", pixels_left); + + data += start_offset; + + while (pixels_left > 0) { + /* 0x2c = write_memory_start */ + /* 0x3c = write_memory_continue */ + u8 dcs_cmd = first ? 0x2c : 0x3c; + int pixels; + DSI_DECL_VARS; + first = 0; + +#if 1 + /* using fifo not empty */ + /* TX_FIFO_NOT_EMPTY */ + while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { + udelay(1); + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + return -EIO; + } + } +#elif 1 + /* using fifo emptiness */ + while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < + max_dsi_packet_size) { + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + return -EIO; + } + } +#else + while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { + fifo_stalls++; + if (fifo_stalls > 0xfffff) { + DSSERR("fifo stalls overflow, pixels left %d\n", + pixels_left); + dsi_if_enable(0); + return -EIO; + } + } +#endif + pixels = min(max_pixels_per_packet, pixels_left); + + pixels_left -= pixels; + + dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, + 1 + pixels * bytespp, 0); + + DSI_PUSH(0, dcs_cmd); + + while (pixels-- > 0) { + u32 pix = __raw_readl(data++); + + DSI_PUSH(0, (pix >> 16) & 0xff); + DSI_PUSH(0, (pix >> 8) & 0xff); + DSI_PUSH(0, (pix >> 0) & 0xff); + + current_x++; + if (current_x == x+w) { + current_x = x; + data += horiz_inc; + } + } + + DSI_FLUSH(0); + } + + return 0; +} + +static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + unsigned bytespp; + unsigned bytespl; + unsigned bytespf; + unsigned total_len; + unsigned packet_payload; + unsigned packet_len; + u32 l; + bool use_te_trigger; + const unsigned channel = 0; + /* line buffer is 1024 x 24bits */ + /* XXX: for some reason using full buffer size causes considerable TX + * slowdown with update sizes that fill the whole buffer */ + const unsigned line_buf_size = 1023 * 3; + + use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; + + if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) + DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", + x, y, w, h); + + bytespp = dssdev->ctrl.pixel_size / 8; + bytespl = w * bytespp; + bytespf = bytespl * h; + + /* NOTE: packet_payload has to be equal to N * bytespl, where N is + * number of lines in a packet. See errata about VP_CLK_RATIO */ + + if (bytespf < line_buf_size) + packet_payload = bytespf; + else + packet_payload = (line_buf_size) / bytespl * bytespl; + + packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ + total_len = (bytespf / packet_payload) * packet_len; + + if (bytespf % packet_payload) + total_len += (bytespf % packet_payload) + 1; + + if (0) + dsi_vc_print_status(1); + + l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ + dsi_write_reg(DSI_VC_TE(channel), l); + + dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); + + if (use_te_trigger) + l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ + else + l = FLD_MOD(l, 1, 31, 31); /* TE_START */ + dsi_write_reg(DSI_VC_TE(channel), l); + + /* We put SIDLEMODE to no-idle for the duration of the transfer, + * because DSS interrupts are not capable of waking up the CPU and the + * framedone interrupt could be delayed for quite a long time. I think + * the same goes for any DSS interrupts, but for some reason I have not + * seen the problem anywhere else than here. + */ + dispc_disable_sidle(); + + dss_start_update(dssdev); + + if (use_te_trigger) { + /* disable LP_RX_TO, so that we can receive TE. Time to wait + * for TE is longer than the timer allows */ + REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ + + dsi_vc_send_bta(channel); + +#ifdef DSI_CATCH_MISSING_TE + mod_timer(&dsi.te_timer, jiffies + msecs_to_jiffies(250)); +#endif + } +} + +#ifdef DSI_CATCH_MISSING_TE +static void dsi_te_timeout(unsigned long arg) +{ + DSSERR("TE not received for 250ms!\n"); +} +#endif + +static void dsi_framedone_irq_callback(void *data, u32 mask) +{ + /* Note: We get FRAMEDONE when DISPC has finished sending pixels and + * turns itself off. However, DSI still has the pixels in its buffers, + * and is sending the data. + */ + + /* SIDLEMODE back to smart-idle */ + dispc_enable_sidle(); + + dsi.framedone_received = true; + wake_up(&dsi.waitqueue); +} + +static void dsi_set_update_region(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + spin_lock(&dsi.update_lock); + if (dsi.update_region.dirty) { + dsi.update_region.x = min(x, dsi.update_region.x); + dsi.update_region.y = min(y, dsi.update_region.y); + dsi.update_region.w = max(w, dsi.update_region.w); + dsi.update_region.h = max(h, dsi.update_region.h); + } else { + dsi.update_region.x = x; + dsi.update_region.y = y; + dsi.update_region.w = w; + dsi.update_region.h = h; + } + + dsi.update_region.device = dssdev; + dsi.update_region.dirty = true; + + spin_unlock(&dsi.update_lock); + +} + +static int dsi_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + int r = 0; + int i; + + WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + + if (dsi.update_mode != mode) { + dsi.update_mode = mode; + + /* Mark the overlays dirty, and do apply(), so that we get the + * overlays configured properly after update mode change. */ + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + if (ovl->manager == dssdev->manager) + ovl->info_dirty = true; + } + + r = dssdev->manager->apply(dssdev->manager); + + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && + mode == OMAP_DSS_UPDATE_AUTO) { + u16 w, h; + + DSSDBG("starting auto update\n"); + + dssdev->get_resolution(dssdev, &w, &h); + + dsi_set_update_region(dssdev, 0, 0, w, h); + + dsi_perf_mark_start_auto(); + + wake_up(&dsi.waitqueue); + } + } + + return r; +} + +static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) +{ + int r; + r = dssdev->driver->enable_te(dssdev, enable); + /* XXX for some reason, DSI TE breaks if we don't wait here. + * Panel bug? Needs more studying */ + msleep(100); + return r; +} + +static void dsi_handle_framedone(void) +{ + int r; + const int channel = 0; + bool use_te_trigger; + + use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; + + if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) + DSSDBG("FRAMEDONE\n"); + + if (use_te_trigger) { + /* enable LP_RX_TO again after the TE */ + REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ + } + + /* Send BTA after the frame. We need this for the TE to work, as TE + * trigger is only sent for BTAs without preceding packet. Thus we need + * to BTA after the pixel packets so that next BTA will cause TE + * trigger. + * + * This is not needed when TE is not in use, but we do it anyway to + * make sure that the transfer has been completed. It would be more + * optimal, but more complex, to wait only just before starting next + * transfer. */ + r = dsi_vc_send_bta_sync(channel); + if (r) + DSSERR("BTA after framedone failed\n"); + + /* RX_FIFO_NOT_EMPTY */ + if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + DSSERR("Received error during frame transfer:\n"); + dsi_vc_flush_receive_data(0); + } + +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC + dispc_fake_vsync_irq(); +#endif +} + +static int dsi_update_thread(void *data) +{ + unsigned long timeout; + struct omap_dss_device *device; + u16 x, y, w, h; + + while (1) { + bool sched; + + wait_event_interruptible(dsi.waitqueue, + dsi.update_mode == OMAP_DSS_UPDATE_AUTO || + (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && + dsi.update_region.dirty == true) || + kthread_should_stop()); + + if (kthread_should_stop()) + break; + + dsi_bus_lock(); + + if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED || + kthread_should_stop()) { + dsi_bus_unlock(); + break; + } + + dsi_perf_mark_setup(); + + if (dsi.update_region.dirty) { + spin_lock(&dsi.update_lock); + dsi.active_update_region = dsi.update_region; + dsi.update_region.dirty = false; + spin_unlock(&dsi.update_lock); + } + + device = dsi.active_update_region.device; + x = dsi.active_update_region.x; + y = dsi.active_update_region.y; + w = dsi.active_update_region.w; + h = dsi.active_update_region.h; + + if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + + if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) + dss_setup_partial_planes(device, + &x, &y, &w, &h); + + dispc_set_lcd_size(w, h); + } + + if (dsi.active_update_region.dirty) { + dsi.active_update_region.dirty = false; + /* XXX TODO we don't need to send the coords, if they + * are the same that are already programmed to the + * panel. That should speed up manual update a bit */ + device->driver->setup_update(device, x, y, w, h); + } + + dsi_perf_mark_start(); + + if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + dsi_vc_config_vp(0); + + if (dsi.te_enabled && dsi.use_ext_te) + device->driver->wait_for_te(device); + + dsi.framedone_received = false; + + dsi_update_screen_dispc(device, x, y, w, h); + + /* wait for framedone */ + timeout = msecs_to_jiffies(1000); + wait_event_timeout(dsi.waitqueue, + dsi.framedone_received == true, + timeout); + + if (!dsi.framedone_received) { + DSSERR("framedone timeout\n"); + DSSERR("failed update %d,%d %dx%d\n", + x, y, w, h); + + dispc_enable_sidle(); + dispc_enable_lcd_out(0); + + dsi_reset_tx_fifo(0); + } else { + dsi_handle_framedone(); + dsi_perf_show("DISPC"); + } + } else { + dsi_update_screen_l4(device, x, y, w, h); + dsi_perf_show("L4"); + } + + sched = atomic_read(&dsi.bus_lock.count) < 0; + + complete_all(&dsi.update_completion); + + dsi_bus_unlock(); + + /* XXX We need to give others chance to get the bus lock. Is + * there a better way for this? */ + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched) + schedule_timeout_interruptible(1); + } + + DSSDBG("update thread exiting\n"); + + return 0; +} + + + +/* Display funcs */ + +static int dsi_display_init_dispc(struct omap_dss_device *dssdev) +{ + int r; + + r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL, + DISPC_IRQ_FRAMEDONE); + if (r) { + DSSERR("can't get FRAMEDONE irq\n"); + return r; + } + + dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); + + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); + dispc_enable_fifohandcheck(1); + + dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); + + { + struct omap_video_timings timings = { + .hsw = 1, + .hfp = 1, + .hbp = 1, + .vsw = 1, + .vfp = 0, + .vbp = 0, + }; + + dispc_set_lcd_timings(&timings); + } + + return 0; +} + +static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev) +{ + omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL, + DISPC_IRQ_FRAMEDONE); +} + +static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) +{ + struct dsi_clock_info cinfo; + int r; + + /* we always use DSS2_FCK as input clock */ + cinfo.use_dss2_fck = true; + cinfo.regn = dssdev->phy.dsi.div.regn; + cinfo.regm = dssdev->phy.dsi.div.regm; + cinfo.regm3 = dssdev->phy.dsi.div.regm3; + cinfo.regm4 = dssdev->phy.dsi.div.regm4; + r = dsi_calc_clock_rates(&cinfo); + if (r) + return r; + + r = dsi_pll_set_clock_div(&cinfo); + if (r) { + DSSERR("Failed to set dsi clocks\n"); + return r; + } + + return 0; +} + +static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev) +{ + struct dispc_clock_info dispc_cinfo; + int r; + unsigned long long fck; + + fck = dsi_get_dsi1_pll_rate(); + + dispc_cinfo.lck_div = dssdev->phy.dsi.div.lck_div; + dispc_cinfo.pck_div = dssdev->phy.dsi.div.pck_div; + + r = dispc_calc_clock_rates(fck, &dispc_cinfo); + if (r) { + DSSERR("Failed to calc dispc clocks\n"); + return r; + } + + r = dispc_set_clock_div(&dispc_cinfo); + if (r) { + DSSERR("Failed to set dispc clocks\n"); + return r; + } + + return 0; +} + +static int dsi_display_init_dsi(struct omap_dss_device *dssdev) +{ + int r; + + _dsi_print_reset_status(); + + r = dsi_pll_init(dssdev, true, true); + if (r) + goto err0; + + r = dsi_configure_dsi_clocks(dssdev); + if (r) + goto err1; + + dss_select_clk_source(true, true); + + DSSDBG("PLL OK\n"); + + r = dsi_configure_dispc_clocks(dssdev); + if (r) + goto err2; + + r = dsi_complexio_init(dssdev); + if (r) + goto err2; + + _dsi_print_reset_status(); + + dsi_proto_timings(dssdev); + dsi_set_lp_clk_divisor(dssdev); + + if (1) + _dsi_print_reset_status(); + + r = dsi_proto_config(dssdev); + if (r) + goto err3; + + /* enable interface */ + dsi_vc_enable(0, 1); + dsi_if_enable(1); + dsi_force_tx_stop_mode_io(); + + if (dssdev->driver->enable) { + r = dssdev->driver->enable(dssdev); + if (r) + goto err4; + } + + /* enable high-speed after initial config */ + dsi_vc_enable_hs(0, 1); + + return 0; +err4: + dsi_if_enable(0); +err3: + dsi_complexio_uninit(); +err2: + dss_select_clk_source(false, false); +err1: + dsi_pll_uninit(); +err0: + return r; +} + +static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) +{ + if (dssdev->driver->disable) + dssdev->driver->disable(dssdev); + + dss_select_clk_source(false, false); + dsi_complexio_uninit(); + dsi_pll_uninit(); +} + +static int dsi_core_init(void) +{ + /* Autoidle */ + REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); + + /* ENWAKEUP */ + REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); + + /* SIDLEMODE smart-idle */ + REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); + + _dsi_initialize_irq(); + + return 0; +} + +static int dsi_display_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + + DSSDBG("dsi_display_enable\n"); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { + DSSERR("dssdev already enabled\n"); + r = -EINVAL; + goto err1; + } + + enable_clocks(1); + dsi_enable_pll_clock(1); + + r = _dsi_reset(); + if (r) + goto err2; + + dsi_core_init(); + + r = dsi_display_init_dispc(dssdev); + if (r) + goto err2; + + r = dsi_display_init_dsi(dssdev); + if (r) + goto err3; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + dsi.use_ext_te = dssdev->phy.dsi.ext_te; + r = dsi_set_te(dssdev, dsi.te_enabled); + if (r) + goto err4; + + dsi_set_update_mode(dssdev, dsi.user_update_mode); + + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + + return 0; + +err4: + + dsi_display_uninit_dsi(dssdev); +err3: + dsi_display_uninit_dispc(dssdev); +err2: + enable_clocks(0); + dsi_enable_pll_clock(0); +err1: + omap_dss_stop_device(dssdev); +err0: + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + DSSDBG("dsi_display_enable FAILED\n"); + return r; +} + +static void dsi_display_disable(struct omap_dss_device *dssdev) +{ + DSSDBG("dsi_display_disable\n"); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || + dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) + goto end; + + dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + + dsi_display_uninit_dispc(dssdev); + + dsi_display_uninit_dsi(dssdev); + + enable_clocks(0); + dsi_enable_pll_clock(0); + + omap_dss_stop_device(dssdev); +end: + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); +} + +static int dsi_display_suspend(struct omap_dss_device *dssdev) +{ + DSSDBG("dsi_display_suspend\n"); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || + dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) + goto end; + + dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + + dsi_display_uninit_dispc(dssdev); + + dsi_display_uninit_dsi(dssdev); + + enable_clocks(0); + dsi_enable_pll_clock(0); +end: + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + + return 0; +} + +static int dsi_display_resume(struct omap_dss_device *dssdev) +{ + int r; + + DSSDBG("dsi_display_resume\n"); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { + DSSERR("dssdev not suspended\n"); + r = -EINVAL; + goto err0; + } + + enable_clocks(1); + dsi_enable_pll_clock(1); + + r = _dsi_reset(); + if (r) + goto err1; + + dsi_core_init(); + + r = dsi_display_init_dispc(dssdev); + if (r) + goto err1; + + r = dsi_display_init_dsi(dssdev); + if (r) + goto err2; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + r = dsi_set_te(dssdev, dsi.te_enabled); + if (r) + goto err2; + + dsi_set_update_mode(dssdev, dsi.user_update_mode); + + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + + return 0; + +err2: + dsi_display_uninit_dispc(dssdev); +err1: + enable_clocks(0); + dsi_enable_pll_clock(0); +err0: + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + DSSDBG("dsi_display_resume FAILED\n"); + return r; +} + +static int dsi_display_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + int r = 0; + u16 dw, dh; + + DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); + + mutex_lock(&dsi.lock); + + if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) + goto end; + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + goto end; + + dssdev->get_resolution(dssdev, &dw, &dh); + + if (x > dw || y > dh) + goto end; + + if (x + w > dw) + w = dw - x; + + if (y + h > dh) + h = dh - y; + + if (w == 0 || h == 0) + goto end; + + if (w == 1) { + r = -EINVAL; + goto end; + } + + dsi_set_update_region(dssdev, x, y, w, h); + + wake_up(&dsi.waitqueue); + +end: + mutex_unlock(&dsi.lock); + + return r; +} + +static int dsi_display_sync(struct omap_dss_device *dssdev) +{ + bool wait; + + DSSDBG("dsi_display_sync()\n"); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && + dsi.update_region.dirty) { + INIT_COMPLETION(dsi.update_completion); + wait = true; + } else { + wait = false; + } + + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + + if (wait) + wait_for_completion_interruptible(&dsi.update_completion); + + DSSDBG("dsi_display_sync() done\n"); + return 0; +} + +static int dsi_display_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + int r = 0; + + DSSDBGF("%d", mode); + + mutex_lock(&dsi.lock); + dsi_bus_lock(); + + dsi.user_update_mode = mode; + r = dsi_set_update_mode(dssdev, mode); + + dsi_bus_unlock(); + mutex_unlock(&dsi.lock); + + return r; +} + +static enum omap_dss_update_mode dsi_display_get_update_mode( + struct omap_dss_device *dssdev) +{ + return dsi.update_mode; +} + + +static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable) +{ + int r = 0; + + DSSDBGF("%d", enable); + + if (!dssdev->driver->enable_te) + return -ENOENT; + + dsi_bus_lock(); + + dsi.te_enabled = enable; + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + goto end; + + r = dsi_set_te(dssdev, enable); +end: + dsi_bus_unlock(); + + return r; +} + +static int dsi_display_get_te(struct omap_dss_device *dssdev) +{ + return dsi.te_enabled; +} + +static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate) +{ + + DSSDBGF("%d", rotate); + + if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) + return -EINVAL; + + dsi_bus_lock(); + dssdev->driver->set_rotate(dssdev, rotate); + if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { + u16 w, h; + /* the display dimensions may have changed, so set a new + * update region */ + dssdev->get_resolution(dssdev, &w, &h); + dsi_set_update_region(dssdev, 0, 0, w, h); + } + dsi_bus_unlock(); + + return 0; +} + +static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev) +{ + if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) + return 0; + + return dssdev->driver->get_rotate(dssdev); +} + +static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror) +{ + DSSDBGF("%d", mirror); + + if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) + return -EINVAL; + + dsi_bus_lock(); + dssdev->driver->set_mirror(dssdev, mirror); + dsi_bus_unlock(); + + return 0; +} + +static bool dsi_display_get_mirror(struct omap_dss_device *dssdev) +{ + if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) + return 0; + + return dssdev->driver->get_mirror(dssdev); +} + +static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num) +{ + int r; + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EIO; + + DSSDBGF("%d", test_num); + + dsi_bus_lock(); + + /* run test first in low speed mode */ + dsi_vc_enable_hs(0, 0); + + if (dssdev->driver->run_test) { + r = dssdev->driver->run_test(dssdev, test_num); + if (r) + goto end; + } + + /* then in high speed */ + dsi_vc_enable_hs(0, 1); + + if (dssdev->driver->run_test) { + r = dssdev->driver->run_test(dssdev, test_num); + if (r) + goto end; + } + +end: + dsi_vc_enable_hs(0, 1); + + dsi_bus_unlock(); + + return r; +} + +static int dsi_display_memory_read(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h) +{ + int r; + + DSSDBGF(""); + + if (!dssdev->driver->memory_read) + return -EINVAL; + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EIO; + + dsi_bus_lock(); + + r = dssdev->driver->memory_read(dssdev, buf, size, + x, y, w, h); + + /* Memory read usually changes the update area. This will + * force the next update to re-set the update area */ + dsi.active_update_region.dirty = true; + + dsi_bus_unlock(); + + return r; +} + +void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, + u32 fifo_size, enum omap_burst_size *burst_size, + u32 *fifo_low, u32 *fifo_high) +{ + unsigned burst_size_bytes; + + *burst_size = OMAP_DSS_BURST_16x32; + burst_size_bytes = 16 * 32 / 8; + + *fifo_high = fifo_size - burst_size_bytes; + *fifo_low = fifo_size - burst_size_bytes * 8; +} + +int dsi_init_display(struct omap_dss_device *dssdev) +{ + DSSDBG("DSI init\n"); + + dssdev->enable = dsi_display_enable; + dssdev->disable = dsi_display_disable; + dssdev->suspend = dsi_display_suspend; + dssdev->resume = dsi_display_resume; + dssdev->update = dsi_display_update; + dssdev->sync = dsi_display_sync; + dssdev->set_update_mode = dsi_display_set_update_mode; + dssdev->get_update_mode = dsi_display_get_update_mode; + dssdev->enable_te = dsi_display_enable_te; + dssdev->get_te = dsi_display_get_te; + + dssdev->get_rotate = dsi_display_get_rotate; + dssdev->set_rotate = dsi_display_set_rotate; + + dssdev->get_mirror = dsi_display_get_mirror; + dssdev->set_mirror = dsi_display_set_mirror; + + dssdev->run_test = dsi_display_run_test; + dssdev->memory_read = dsi_display_memory_read; + + /* XXX these should be figured out dynamically */ + dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; + + dsi.vc[0].dssdev = dssdev; + dsi.vc[1].dssdev = dssdev; + + return 0; +} + +int dsi_init(struct platform_device *pdev) +{ + u32 rev; + int r; + struct sched_param param = { + .sched_priority = MAX_USER_RT_PRIO-1 + }; + + spin_lock_init(&dsi.errors_lock); + dsi.errors = 0; + + init_completion(&dsi.bta_completion); + init_completion(&dsi.update_completion); + + dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi"); + if (IS_ERR(dsi.thread)) { + DSSERR("cannot create kthread\n"); + r = PTR_ERR(dsi.thread); + goto err0; + } + sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m); + + init_waitqueue_head(&dsi.waitqueue); + spin_lock_init(&dsi.update_lock); + + mutex_init(&dsi.lock); + mutex_init(&dsi.bus_lock); + +#ifdef DSI_CATCH_MISSING_TE + init_timer(&dsi.te_timer); + dsi.te_timer.function = dsi_te_timeout; + dsi.te_timer.data = 0; +#endif + + dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; + dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; + + dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); + if (!dsi.base) { + DSSERR("can't ioremap DSI\n"); + r = -ENOMEM; + goto err1; + } + + dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi"); + if (IS_ERR(dsi.vdds_dsi_reg)) { + iounmap(dsi.base); + DSSERR("can't get VDDS_DSI regulator\n"); + r = PTR_ERR(dsi.vdds_dsi_reg); + goto err2; + } + + enable_clocks(1); + + rev = dsi_read_reg(DSI_REVISION); + printk(KERN_INFO "OMAP DSI rev %d.%d\n", + FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); + + enable_clocks(0); + + wake_up_process(dsi.thread); + + return 0; +err2: + iounmap(dsi.base); +err1: + kthread_stop(dsi.thread); +err0: + return r; +} + +void dsi_exit(void) +{ + kthread_stop(dsi.thread); + + regulator_put(dsi.vdds_dsi_reg); + + iounmap(dsi.base); + + DSSDBG("omap_dsi_exit\n"); +} + diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c new file mode 100644 index 00000000000..9b05ee65a15 --- /dev/null +++ b/drivers/video/omap2/dss/dss.c @@ -0,0 +1,596 @@ +/* + * linux/drivers/video/omap2/dss/dss.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "DSS" + +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/seq_file.h> +#include <linux/clk.h> + +#include <plat/display.h> +#include "dss.h" + +#define DSS_BASE 0x48050000 + +#define DSS_SZ_REGS SZ_512 + +struct dss_reg { + u16 idx; +}; + +#define DSS_REG(idx) ((const struct dss_reg) { idx }) + +#define DSS_REVISION DSS_REG(0x0000) +#define DSS_SYSCONFIG DSS_REG(0x0010) +#define DSS_SYSSTATUS DSS_REG(0x0014) +#define DSS_IRQSTATUS DSS_REG(0x0018) +#define DSS_CONTROL DSS_REG(0x0040) +#define DSS_SDI_CONTROL DSS_REG(0x0044) +#define DSS_PLL_CONTROL DSS_REG(0x0048) +#define DSS_SDI_STATUS DSS_REG(0x005C) + +#define REG_GET(idx, start, end) \ + FLD_GET(dss_read_reg(idx), start, end) + +#define REG_FLD_MOD(idx, val, start, end) \ + dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) + +static struct { + void __iomem *base; + + struct clk *dpll4_m4_ck; + + unsigned long cache_req_pck; + unsigned long cache_prate; + struct dss_clock_info cache_dss_cinfo; + struct dispc_clock_info cache_dispc_cinfo; + + u32 ctx[DSS_SZ_REGS / sizeof(u32)]; +} dss; + +static int _omap_dss_wait_reset(void); + +static inline void dss_write_reg(const struct dss_reg idx, u32 val) +{ + __raw_writel(val, dss.base + idx.idx); +} + +static inline u32 dss_read_reg(const struct dss_reg idx) +{ + return __raw_readl(dss.base + idx.idx); +} + +#define SR(reg) \ + dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) +#define RR(reg) \ + dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) + +void dss_save_context(void) +{ + if (cpu_is_omap24xx()) + return; + + SR(SYSCONFIG); + SR(CONTROL); + +#ifdef CONFIG_OMAP2_DSS_SDI + SR(SDI_CONTROL); + SR(PLL_CONTROL); +#endif +} + +void dss_restore_context(void) +{ + if (_omap_dss_wait_reset()) + DSSERR("DSS not coming out of reset after sleep\n"); + + RR(SYSCONFIG); + RR(CONTROL); + +#ifdef CONFIG_OMAP2_DSS_SDI + RR(SDI_CONTROL); + RR(PLL_CONTROL); +#endif +} + +#undef SR +#undef RR + +void dss_sdi_init(u8 datapairs) +{ + u32 l; + + BUG_ON(datapairs > 3 || datapairs < 1); + + l = dss_read_reg(DSS_SDI_CONTROL); + l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ + l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ + l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ + dss_write_reg(DSS_SDI_CONTROL, l); + + l = dss_read_reg(DSS_PLL_CONTROL); + l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ + l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ + l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ + dss_write_reg(DSS_PLL_CONTROL, l); +} + +int dss_sdi_enable(void) +{ + unsigned long timeout; + + dispc_pck_free_enable(1); + + /* Reset SDI PLL */ + REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ + udelay(1); /* wait 2x PCLK */ + + /* Lock SDI PLL */ + REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ + + /* Waiting for PLL lock request to complete */ + timeout = jiffies + msecs_to_jiffies(500); + while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) { + if (time_after_eq(jiffies, timeout)) { + DSSERR("PLL lock request timed out\n"); + goto err1; + } + } + + /* Clearing PLL_GO bit */ + REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); + + /* Waiting for PLL to lock */ + timeout = jiffies + msecs_to_jiffies(500); + while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) { + if (time_after_eq(jiffies, timeout)) { + DSSERR("PLL lock timed out\n"); + goto err1; + } + } + + dispc_lcd_enable_signal(1); + + /* Waiting for SDI reset to complete */ + timeout = jiffies + msecs_to_jiffies(500); + while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2))) { + if (time_after_eq(jiffies, timeout)) { + DSSERR("SDI reset timed out\n"); + goto err2; + } + } + + return 0; + + err2: + dispc_lcd_enable_signal(0); + err1: + /* Reset SDI PLL */ + REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ + + dispc_pck_free_enable(0); + + return -ETIMEDOUT; +} + +void dss_sdi_disable(void) +{ + dispc_lcd_enable_signal(0); + + dispc_pck_free_enable(0); + + /* Reset SDI PLL */ + REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ +} + +void dss_dump_clocks(struct seq_file *s) +{ + unsigned long dpll4_ck_rate; + unsigned long dpll4_m4_ck_rate; + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dpll4_ck_rate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + dpll4_m4_ck_rate = clk_get_rate(dss.dpll4_m4_ck); + + seq_printf(s, "- DSS -\n"); + + seq_printf(s, "dpll4_ck %lu\n", dpll4_ck_rate); + + seq_printf(s, "dss1_alwon_fclk = %lu / %lu * 2 = %lu\n", + dpll4_ck_rate, + dpll4_ck_rate / dpll4_m4_ck_rate, + dss_clk_get_rate(DSS_CLK_FCK1)); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +void dss_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r)) + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + DUMPREG(DSS_REVISION); + DUMPREG(DSS_SYSCONFIG); + DUMPREG(DSS_SYSSTATUS); + DUMPREG(DSS_IRQSTATUS); + DUMPREG(DSS_CONTROL); + DUMPREG(DSS_SDI_CONTROL); + DUMPREG(DSS_PLL_CONTROL); + DUMPREG(DSS_SDI_STATUS); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +#undef DUMPREG +} + +void dss_select_clk_source(bool dsi, bool dispc) +{ + u32 r; + r = dss_read_reg(DSS_CONTROL); + r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ + r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ + dss_write_reg(DSS_CONTROL, r); +} + +int dss_get_dsi_clk_source(void) +{ + return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); +} + +int dss_get_dispc_clk_source(void) +{ + return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); +} + +/* calculate clock rates using dividers in cinfo */ +int dss_calc_clock_rates(struct dss_clock_info *cinfo) +{ + unsigned long prate; + + if (cinfo->fck_div > 16 || cinfo->fck_div == 0) + return -EINVAL; + + prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + + cinfo->fck = prate / cinfo->fck_div; + + return 0; +} + +int dss_set_clock_div(struct dss_clock_info *cinfo) +{ + unsigned long prate; + int r; + + if (cpu_is_omap34xx()) { + prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + DSSDBG("dpll4_m4 = %ld\n", prate); + + r = clk_set_rate(dss.dpll4_m4_ck, prate / cinfo->fck_div); + if (r) + return r; + } + + DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); + + return 0; +} + +int dss_get_clock_div(struct dss_clock_info *cinfo) +{ + cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1); + + if (cpu_is_omap34xx()) { + unsigned long prate; + prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + cinfo->fck_div = prate / (cinfo->fck / 2); + } else { + cinfo->fck_div = 0; + } + + return 0; +} + +unsigned long dss_get_dpll4_rate(void) +{ + if (cpu_is_omap34xx()) + return clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + else + return 0; +} + +int dss_calc_clock_div(bool is_tft, unsigned long req_pck, + struct dss_clock_info *dss_cinfo, + struct dispc_clock_info *dispc_cinfo) +{ + unsigned long prate; + struct dss_clock_info best_dss; + struct dispc_clock_info best_dispc; + + unsigned long fck; + + u16 fck_div; + + int match = 0; + int min_fck_per_pck; + + prate = dss_get_dpll4_rate(); + + fck = dss_clk_get_rate(DSS_CLK_FCK1); + if (req_pck == dss.cache_req_pck && + ((cpu_is_omap34xx() && prate == dss.cache_prate) || + dss.cache_dss_cinfo.fck == fck)) { + DSSDBG("dispc clock info found from cache.\n"); + *dss_cinfo = dss.cache_dss_cinfo; + *dispc_cinfo = dss.cache_dispc_cinfo; + return 0; + } + + min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; + + if (min_fck_per_pck && + req_pck * min_fck_per_pck > DISPC_MAX_FCK) { + DSSERR("Requested pixel clock not possible with the current " + "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " + "the constraint off.\n"); + min_fck_per_pck = 0; + } + +retry: + memset(&best_dss, 0, sizeof(best_dss)); + memset(&best_dispc, 0, sizeof(best_dispc)); + + if (cpu_is_omap24xx()) { + struct dispc_clock_info cur_dispc; + /* XXX can we change the clock on omap2? */ + fck = dss_clk_get_rate(DSS_CLK_FCK1); + fck_div = 1; + + dispc_find_clk_divs(is_tft, req_pck, fck, &cur_dispc); + match = 1; + + best_dss.fck = fck; + best_dss.fck_div = fck_div; + + best_dispc = cur_dispc; + + goto found; + } else if (cpu_is_omap34xx()) { + for (fck_div = 16; fck_div > 0; --fck_div) { + struct dispc_clock_info cur_dispc; + + fck = prate / fck_div * 2; + + if (fck > DISPC_MAX_FCK) + continue; + + if (min_fck_per_pck && + fck < req_pck * min_fck_per_pck) + continue; + + match = 1; + + dispc_find_clk_divs(is_tft, req_pck, fck, &cur_dispc); + + if (abs(cur_dispc.pck - req_pck) < + abs(best_dispc.pck - req_pck)) { + + best_dss.fck = fck; + best_dss.fck_div = fck_div; + + best_dispc = cur_dispc; + + if (cur_dispc.pck == req_pck) + goto found; + } + } + } else { + BUG(); + } + +found: + if (!match) { + if (min_fck_per_pck) { + DSSERR("Could not find suitable clock settings.\n" + "Turning FCK/PCK constraint off and" + "trying again.\n"); + min_fck_per_pck = 0; + goto retry; + } + + DSSERR("Could not find suitable clock settings.\n"); + + return -EINVAL; + } + + if (dss_cinfo) + *dss_cinfo = best_dss; + if (dispc_cinfo) + *dispc_cinfo = best_dispc; + + dss.cache_req_pck = req_pck; + dss.cache_prate = prate; + dss.cache_dss_cinfo = best_dss; + dss.cache_dispc_cinfo = best_dispc; + + return 0; +} + + + +static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) +{ + dispc_irq_handler(); + + return IRQ_HANDLED; +} + +static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) +{ + u32 irqstatus; + + irqstatus = dss_read_reg(DSS_IRQSTATUS); + + if (irqstatus & (1<<0)) /* DISPC_IRQ */ + dispc_irq_handler(); +#ifdef CONFIG_OMAP2_DSS_DSI + if (irqstatus & (1<<1)) /* DSI_IRQ */ + dsi_irq_handler(); +#endif + + return IRQ_HANDLED; +} + +static int _omap_dss_wait_reset(void) +{ + unsigned timeout = 1000; + + while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { + udelay(1); + if (!--timeout) { + DSSERR("soft reset failed\n"); + return -ENODEV; + } + } + + return 0; +} + +static int _omap_dss_reset(void) +{ + /* Soft reset */ + REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); + return _omap_dss_wait_reset(); +} + +void dss_set_venc_output(enum omap_dss_venc_type type) +{ + int l = 0; + + if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) + l = 0; + else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) + l = 1; + else + BUG(); + + /* venc out selection. 0 = comp, 1 = svideo */ + REG_FLD_MOD(DSS_CONTROL, l, 6, 6); +} + +void dss_set_dac_pwrdn_bgz(bool enable) +{ + REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ +} + +int dss_init(bool skip_init) +{ + int r; + u32 rev; + + dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); + if (!dss.base) { + DSSERR("can't ioremap DSS\n"); + r = -ENOMEM; + goto fail0; + } + + if (!skip_init) { + /* disable LCD and DIGIT output. This seems to fix the synclost + * problem that we get, if the bootloader starts the DSS and + * the kernel resets it */ + omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440); + + /* We need to wait here a bit, otherwise we sometimes start to + * get synclost errors, and after that only power cycle will + * restore DSS functionality. I have no idea why this happens. + * And we have to wait _before_ resetting the DSS, but after + * enabling clocks. + */ + msleep(50); + + _omap_dss_reset(); + } + + /* autoidle */ + REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); + + /* Select DPLL */ + REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); + +#ifdef CONFIG_OMAP2_DSS_VENC + REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ + REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ + REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ +#endif + + r = request_irq(INT_24XX_DSS_IRQ, + cpu_is_omap24xx() + ? dss_irq_handler_omap2 + : dss_irq_handler_omap3, + 0, "OMAP DSS", NULL); + + if (r < 0) { + DSSERR("omap2 dss: request_irq failed\n"); + goto fail1; + } + + if (cpu_is_omap34xx()) { + dss.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); + if (IS_ERR(dss.dpll4_m4_ck)) { + DSSERR("Failed to get dpll4_m4_ck\n"); + r = PTR_ERR(dss.dpll4_m4_ck); + goto fail2; + } + } + + dss_save_context(); + + rev = dss_read_reg(DSS_REVISION); + printk(KERN_INFO "OMAP DSS rev %d.%d\n", + FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); + + return 0; + +fail2: + free_irq(INT_24XX_DSS_IRQ, NULL); +fail1: + iounmap(dss.base); +fail0: + return r; +} + +void dss_exit(void) +{ + if (cpu_is_omap34xx()) + clk_put(dss.dpll4_m4_ck); + + free_irq(INT_24XX_DSS_IRQ, NULL); + + iounmap(dss.base); +} + diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h new file mode 100644 index 00000000000..8da5ac42151 --- /dev/null +++ b/drivers/video/omap2/dss/dss.h @@ -0,0 +1,370 @@ +/* + * linux/drivers/video/omap2/dss/dss.h + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __OMAP2_DSS_H +#define __OMAP2_DSS_H + +#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT +#define DEBUG +#endif + +#ifdef DEBUG +extern unsigned int dss_debug; +#ifdef DSS_SUBSYS_NAME +#define DSSDBG(format, ...) \ + if (dss_debug) \ + printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \ + ## __VA_ARGS__) +#else +#define DSSDBG(format, ...) \ + if (dss_debug) \ + printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__) +#endif + +#ifdef DSS_SUBSYS_NAME +#define DSSDBGF(format, ...) \ + if (dss_debug) \ + printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \ + ": %s(" format ")\n", \ + __func__, \ + ## __VA_ARGS__) +#else +#define DSSDBGF(format, ...) \ + if (dss_debug) \ + printk(KERN_DEBUG "omapdss: " \ + ": %s(" format ")\n", \ + __func__, \ + ## __VA_ARGS__) +#endif + +#else /* DEBUG */ +#define DSSDBG(format, ...) +#define DSSDBGF(format, ...) +#endif + + +#ifdef DSS_SUBSYS_NAME +#define DSSERR(format, ...) \ + printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \ + ## __VA_ARGS__) +#else +#define DSSERR(format, ...) \ + printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__) +#endif + +#ifdef DSS_SUBSYS_NAME +#define DSSINFO(format, ...) \ + printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \ + ## __VA_ARGS__) +#else +#define DSSINFO(format, ...) \ + printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__) +#endif + +#ifdef DSS_SUBSYS_NAME +#define DSSWARN(format, ...) \ + printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \ + ## __VA_ARGS__) +#else +#define DSSWARN(format, ...) \ + printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__) +#endif + +/* OMAP TRM gives bitfields as start:end, where start is the higher bit + number. For example 7:0 */ +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) +#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) +#define FLD_MOD(orig, val, start, end) \ + (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) + +#define DISPC_MAX_FCK 173000000 + +enum omap_burst_size { + OMAP_DSS_BURST_4x32 = 0, + OMAP_DSS_BURST_8x32 = 1, + OMAP_DSS_BURST_16x32 = 2, +}; + +enum omap_parallel_interface_mode { + OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ + OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ + OMAP_DSS_PARALLELMODE_DSI, +}; + +enum dss_clock { + DSS_CLK_ICK = 1 << 0, + DSS_CLK_FCK1 = 1 << 1, + DSS_CLK_FCK2 = 1 << 2, + DSS_CLK_54M = 1 << 3, + DSS_CLK_96M = 1 << 4, +}; + +struct dss_clock_info { + /* rates that we get with dividers below */ + unsigned long fck; + + /* dividers */ + u16 fck_div; +}; + +struct dispc_clock_info { + /* rates that we get with dividers below */ + unsigned long lck; + unsigned long pck; + + /* dividers */ + u16 lck_div; + u16 pck_div; +}; + +struct dsi_clock_info { + /* rates that we get with dividers below */ + unsigned long fint; + unsigned long clkin4ddr; + unsigned long clkin; + unsigned long dsi1_pll_fclk; + unsigned long dsi2_pll_fclk; + + unsigned long lp_clk; + + /* dividers */ + u16 regn; + u16 regm; + u16 regm3; + u16 regm4; + + u16 lp_clk_div; + + u8 highfreq; + bool use_dss2_fck; +}; + +struct seq_file; +struct platform_device; + +/* core */ +void dss_clk_enable(enum dss_clock clks); +void dss_clk_disable(enum dss_clock clks); +unsigned long dss_clk_get_rate(enum dss_clock clk); +int dss_need_ctx_restore(void); +void dss_dump_clocks(struct seq_file *s); +struct bus_type *dss_get_bus(void); + +/* display */ +int dss_suspend_all_devices(void); +int dss_resume_all_devices(void); +void dss_disable_all_devices(void); + +void dss_init_device(struct platform_device *pdev, + struct omap_dss_device *dssdev); +void dss_uninit_device(struct platform_device *pdev, + struct omap_dss_device *dssdev); +bool dss_use_replication(struct omap_dss_device *dssdev, + enum omap_color_mode mode); +void default_get_overlay_fifo_thresholds(enum omap_plane plane, + u32 fifo_size, enum omap_burst_size *burst_size, + u32 *fifo_low, u32 *fifo_high); + +/* manager */ +int dss_init_overlay_managers(struct platform_device *pdev); +void dss_uninit_overlay_managers(struct platform_device *pdev); +int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); +void dss_setup_partial_planes(struct omap_dss_device *dssdev, + u16 *x, u16 *y, u16 *w, u16 *h); +void dss_start_update(struct omap_dss_device *dssdev); + +/* overlay */ +void dss_init_overlays(struct platform_device *pdev); +void dss_uninit_overlays(struct platform_device *pdev); +int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev); +void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr); +#ifdef L4_EXAMPLE +void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr); +#endif +void dss_recheck_connections(struct omap_dss_device *dssdev, bool force); + +/* DSS */ +int dss_init(bool skip_init); +void dss_exit(void); + +void dss_save_context(void); +void dss_restore_context(void); + +void dss_dump_regs(struct seq_file *s); + +void dss_sdi_init(u8 datapairs); +int dss_sdi_enable(void); +void dss_sdi_disable(void); + +void dss_select_clk_source(bool dsi, bool dispc); +int dss_get_dsi_clk_source(void); +int dss_get_dispc_clk_source(void); +void dss_set_venc_output(enum omap_dss_venc_type type); +void dss_set_dac_pwrdn_bgz(bool enable); + +unsigned long dss_get_dpll4_rate(void); +int dss_calc_clock_rates(struct dss_clock_info *cinfo); +int dss_set_clock_div(struct dss_clock_info *cinfo); +int dss_get_clock_div(struct dss_clock_info *cinfo); +int dss_calc_clock_div(bool is_tft, unsigned long req_pck, + struct dss_clock_info *dss_cinfo, + struct dispc_clock_info *dispc_cinfo); + +/* SDI */ +int sdi_init(bool skip_init); +void sdi_exit(void); +int sdi_init_display(struct omap_dss_device *display); + +/* DSI */ +int dsi_init(struct platform_device *pdev); +void dsi_exit(void); + +void dsi_dump_clocks(struct seq_file *s); +void dsi_dump_regs(struct seq_file *s); + +void dsi_save_context(void); +void dsi_restore_context(void); + +int dsi_init_display(struct omap_dss_device *display); +void dsi_irq_handler(void); +unsigned long dsi_get_dsi1_pll_rate(void); +int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo); +int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, + struct dsi_clock_info *cinfo, + struct dispc_clock_info *dispc_cinfo); +int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, + bool enable_hsdiv); +void dsi_pll_uninit(void); +void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, + u32 fifo_size, enum omap_burst_size *burst_size, + u32 *fifo_low, u32 *fifo_high); + +/* DPI */ +int dpi_init(void); +void dpi_exit(void); +int dpi_init_display(struct omap_dss_device *dssdev); + +/* DISPC */ +int dispc_init(void); +void dispc_exit(void); +void dispc_dump_clocks(struct seq_file *s); +void dispc_dump_regs(struct seq_file *s); +void dispc_irq_handler(void); +void dispc_fake_vsync_irq(void); + +void dispc_save_context(void); +void dispc_restore_context(void); + +void dispc_enable_sidle(void); +void dispc_disable_sidle(void); + +void dispc_lcd_enable_signal_polarity(bool act_high); +void dispc_lcd_enable_signal(bool enable); +void dispc_pck_free_enable(bool enable); +void dispc_enable_fifohandcheck(bool enable); + +void dispc_set_lcd_size(u16 width, u16 height); +void dispc_set_digit_size(u16 width, u16 height); +u32 dispc_get_plane_fifo_size(enum omap_plane plane); +void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); +void dispc_enable_fifomerge(bool enable); +void dispc_set_burst_size(enum omap_plane plane, + enum omap_burst_size burst_size); + +void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); +void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); +void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y); +void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height); +void dispc_set_channel_out(enum omap_plane plane, + enum omap_channel channel_out); + +int dispc_setup_plane(enum omap_plane plane, + u32 paddr, u16 screen_width, + u16 pos_x, u16 pos_y, + u16 width, u16 height, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, + enum omap_dss_rotation_type rotation_type, + u8 rotation, bool mirror, + u8 global_alpha); + +bool dispc_go_busy(enum omap_channel channel); +void dispc_go(enum omap_channel channel); +void dispc_enable_lcd_out(bool enable); +void dispc_enable_digit_out(bool enable); +int dispc_enable_plane(enum omap_plane plane, bool enable); +void dispc_enable_replication(enum omap_plane plane, bool enable); + +void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); +void dispc_set_tft_data_lines(u8 data_lines); +void dispc_set_lcd_display_type(enum omap_lcd_display_type type); +void dispc_set_loadmode(enum omap_dss_load_mode mode); + +void dispc_set_default_color(enum omap_channel channel, u32 color); +u32 dispc_get_default_color(enum omap_channel channel); +void dispc_set_trans_key(enum omap_channel ch, + enum omap_dss_trans_key_type type, + u32 trans_key); +void dispc_get_trans_key(enum omap_channel ch, + enum omap_dss_trans_key_type *type, + u32 *trans_key); +void dispc_enable_trans_key(enum omap_channel ch, bool enable); +void dispc_enable_alpha_blending(enum omap_channel ch, bool enable); +bool dispc_trans_key_enabled(enum omap_channel ch); +bool dispc_alpha_blending_enabled(enum omap_channel ch); + +bool dispc_lcd_timings_ok(struct omap_video_timings *timings); +void dispc_set_lcd_timings(struct omap_video_timings *timings); +unsigned long dispc_fclk_rate(void); +unsigned long dispc_lclk_rate(void); +unsigned long dispc_pclk_rate(void); +void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb); +void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, + struct dispc_clock_info *cinfo); +int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, + struct dispc_clock_info *cinfo); +int dispc_set_clock_div(struct dispc_clock_info *cinfo); +int dispc_get_clock_div(struct dispc_clock_info *cinfo); + + +/* VENC */ +int venc_init(struct platform_device *pdev); +void venc_exit(void); +void venc_dump_regs(struct seq_file *s); +int venc_init_display(struct omap_dss_device *display); + +/* RFBI */ +int rfbi_init(void); +void rfbi_exit(void); +void rfbi_dump_regs(struct seq_file *s); + +int rfbi_configure(int rfbi_module, int bpp, int lines); +void rfbi_enable_rfbi(bool enable); +void rfbi_transfer_area(u16 width, u16 height, + void (callback)(void *data), void *data); +void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); +unsigned long rfbi_get_max_tx_rate(void); +int rfbi_init_display(struct omap_dss_device *display); + +#endif diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c new file mode 100644 index 00000000000..27d9c465c85 --- /dev/null +++ b/drivers/video/omap2/dss/manager.c @@ -0,0 +1,1487 @@ +/* + * linux/drivers/video/omap2/dss/manager.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "MANAGER" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/jiffies.h> + +#include <plat/display.h> +#include <plat/cpu.h> + +#include "dss.h" + +static int num_managers; +static struct list_head manager_list; + +static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name); +} + +static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", + mgr->device ? mgr->device->name : "<none>"); +} + +static ssize_t manager_display_store(struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + int r = 0; + size_t len = size; + struct omap_dss_device *dssdev = NULL; + + int match(struct omap_dss_device *dssdev, void *data) + { + const char *str = data; + return sysfs_streq(dssdev->name, str); + } + + if (buf[size-1] == '\n') + --len; + + if (len > 0) + dssdev = omap_dss_find_device((void *)buf, match); + + if (len > 0 && dssdev == NULL) + return -EINVAL; + + if (dssdev) + DSSDBG("display %s found\n", dssdev->name); + + if (mgr->device) { + r = mgr->unset_device(mgr); + if (r) { + DSSERR("failed to unset display\n"); + goto put_device; + } + } + + if (dssdev) { + r = mgr->set_device(mgr, dssdev); + if (r) { + DSSERR("failed to set manager\n"); + goto put_device; + } + + r = mgr->apply(mgr); + if (r) { + DSSERR("failed to apply dispc config\n"); + goto put_device; + } + } + +put_device: + if (dssdev) + omap_dss_put_device(dssdev); + + return r ? r : size; +} + +static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.default_color); +} + +static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + struct omap_overlay_manager_info info; + u32 color; + int r; + + if (sscanf(buf, "%d", &color) != 1) + return -EINVAL; + + mgr->get_manager_info(mgr, &info); + + info.default_color = color; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + if (r) + return r; + + return size; +} + +static const char *trans_key_type_str[] = { + "gfx-destination", + "video-source", +}; + +static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr, + char *buf) +{ + enum omap_dss_trans_key_type key_type; + + key_type = mgr->info.trans_key_type; + BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str)); + + return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]); +} + +static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + enum omap_dss_trans_key_type key_type; + struct omap_overlay_manager_info info; + int r; + + for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST; + key_type < ARRAY_SIZE(trans_key_type_str); key_type++) { + if (sysfs_streq(buf, trans_key_type_str[key_type])) + break; + } + + if (key_type == ARRAY_SIZE(trans_key_type_str)) + return -EINVAL; + + mgr->get_manager_info(mgr, &info); + + info.trans_key_type = key_type; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + if (r) + return r; + + return size; +} + +static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_key); +} + +static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + struct omap_overlay_manager_info info; + u32 key_value; + int r; + + if (sscanf(buf, "%d", &key_value) != 1) + return -EINVAL; + + mgr->get_manager_info(mgr, &info); + + info.trans_key = key_value; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + if (r) + return r; + + return size; +} + +static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.trans_enabled); +} + +static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + struct omap_overlay_manager_info info; + int enable; + int r; + + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; + + mgr->get_manager_info(mgr, &info); + + info.trans_enabled = enable ? true : false; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + if (r) + return r; + + return size; +} + +static ssize_t manager_alpha_blending_enabled_show( + struct omap_overlay_manager *mgr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", mgr->info.alpha_enabled); +} + +static ssize_t manager_alpha_blending_enabled_store( + struct omap_overlay_manager *mgr, + const char *buf, size_t size) +{ + struct omap_overlay_manager_info info; + int enable; + int r; + + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; + + mgr->get_manager_info(mgr, &info); + + info.alpha_enabled = enable ? true : false; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + if (r) + return r; + + return size; +} + +struct manager_attribute { + struct attribute attr; + ssize_t (*show)(struct omap_overlay_manager *, char *); + ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t); +}; + +#define MANAGER_ATTR(_name, _mode, _show, _store) \ + struct manager_attribute manager_attr_##_name = \ + __ATTR(_name, _mode, _show, _store) + +static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL); +static MANAGER_ATTR(display, S_IRUGO|S_IWUSR, + manager_display_show, manager_display_store); +static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR, + manager_default_color_show, manager_default_color_store); +static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR, + manager_trans_key_type_show, manager_trans_key_type_store); +static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR, + manager_trans_key_value_show, manager_trans_key_value_store); +static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR, + manager_trans_key_enabled_show, + manager_trans_key_enabled_store); +static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR, + manager_alpha_blending_enabled_show, + manager_alpha_blending_enabled_store); + + +static struct attribute *manager_sysfs_attrs[] = { + &manager_attr_name.attr, + &manager_attr_display.attr, + &manager_attr_default_color.attr, + &manager_attr_trans_key_type.attr, + &manager_attr_trans_key_value.attr, + &manager_attr_trans_key_enabled.attr, + &manager_attr_alpha_blending_enabled.attr, + NULL +}; + +static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct omap_overlay_manager *manager; + struct manager_attribute *manager_attr; + + manager = container_of(kobj, struct omap_overlay_manager, kobj); + manager_attr = container_of(attr, struct manager_attribute, attr); + + if (!manager_attr->show) + return -ENOENT; + + return manager_attr->show(manager, buf); +} + +static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t size) +{ + struct omap_overlay_manager *manager; + struct manager_attribute *manager_attr; + + manager = container_of(kobj, struct omap_overlay_manager, kobj); + manager_attr = container_of(attr, struct manager_attribute, attr); + + if (!manager_attr->store) + return -ENOENT; + + return manager_attr->store(manager, buf, size); +} + +static struct sysfs_ops manager_sysfs_ops = { + .show = manager_attr_show, + .store = manager_attr_store, +}; + +static struct kobj_type manager_ktype = { + .sysfs_ops = &manager_sysfs_ops, + .default_attrs = manager_sysfs_attrs, +}; + +/* + * We have 4 levels of cache for the dispc settings. First two are in SW and + * the latter two in HW. + * + * +--------------------+ + * |overlay/manager_info| + * +--------------------+ + * v + * apply() + * v + * +--------------------+ + * | dss_cache | + * +--------------------+ + * v + * configure() + * v + * +--------------------+ + * | shadow registers | + * +--------------------+ + * v + * VFP or lcd/digit_enable + * v + * +--------------------+ + * | registers | + * +--------------------+ + */ + +struct overlay_cache_data { + /* If true, cache changed, but not written to shadow registers. Set + * in apply(), cleared when registers written. */ + bool dirty; + /* If true, shadow registers contain changed values not yet in real + * registers. Set when writing to shadow registers, cleared at + * VSYNC/EVSYNC */ + bool shadow_dirty; + + bool enabled; + + u32 paddr; + void __iomem *vaddr; + u16 screen_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; + u16 pos_y; + u16 out_width; /* if 0, out_width == width */ + u16 out_height; /* if 0, out_height == height */ + u8 global_alpha; + + enum omap_channel channel; + bool replication; + bool ilace; + + enum omap_burst_size burst_size; + u32 fifo_low; + u32 fifo_high; + + bool manual_update; +}; + +struct manager_cache_data { + /* If true, cache changed, but not written to shadow registers. Set + * in apply(), cleared when registers written. */ + bool dirty; + /* If true, shadow registers contain changed values not yet in real + * registers. Set when writing to shadow registers, cleared at + * VSYNC/EVSYNC */ + bool shadow_dirty; + + u32 default_color; + + enum omap_dss_trans_key_type trans_key_type; + u32 trans_key; + bool trans_enabled; + + bool alpha_enabled; + + bool manual_upd_display; + bool manual_update; + bool do_manual_update; + + /* manual update region */ + u16 x, y, w, h; +}; + +static struct { + spinlock_t lock; + struct overlay_cache_data overlay_cache[3]; + struct manager_cache_data manager_cache[2]; + + bool irq_enabled; +} dss_cache; + + + +static int omap_dss_set_device(struct omap_overlay_manager *mgr, + struct omap_dss_device *dssdev) +{ + int i; + int r; + + if (dssdev->manager) { + DSSERR("display '%s' already has a manager '%s'\n", + dssdev->name, dssdev->manager->name); + return -EINVAL; + } + + if ((mgr->supported_displays & dssdev->type) == 0) { + DSSERR("display '%s' does not support manager '%s'\n", + dssdev->name, mgr->name); + return -EINVAL; + } + + for (i = 0; i < mgr->num_overlays; i++) { + struct omap_overlay *ovl = mgr->overlays[i]; + + if (ovl->manager != mgr || !ovl->info.enabled) + continue; + + r = dss_check_overlay(ovl, dssdev); + if (r) + return r; + } + + dssdev->manager = mgr; + mgr->device = dssdev; + mgr->device_changed = true; + + return 0; +} + +static int omap_dss_unset_device(struct omap_overlay_manager *mgr) +{ + if (!mgr->device) { + DSSERR("failed to unset display, display not set.\n"); + return -EINVAL; + } + + mgr->device->manager = NULL; + mgr->device = NULL; + mgr->device_changed = true; + + return 0; +} + +static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) +{ + unsigned long timeout = msecs_to_jiffies(500); + struct manager_cache_data *mc; + enum omap_channel channel; + u32 irq; + int r; + int i; + + if (!mgr->device) + return 0; + + if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) { + irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; + channel = OMAP_DSS_CHANNEL_DIGIT; + } else { + if (mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { + enum omap_dss_update_mode mode; + mode = mgr->device->get_update_mode(mgr->device); + if (mode != OMAP_DSS_UPDATE_AUTO) + return 0; + + irq = DISPC_IRQ_FRAMEDONE; + } else { + irq = DISPC_IRQ_VSYNC; + } + channel = OMAP_DSS_CHANNEL_LCD; + } + + mc = &dss_cache.manager_cache[mgr->id]; + i = 0; + while (1) { + unsigned long flags; + bool shadow_dirty, dirty; + + spin_lock_irqsave(&dss_cache.lock, flags); + dirty = mc->dirty; + shadow_dirty = mc->shadow_dirty; + spin_unlock_irqrestore(&dss_cache.lock, flags); + + if (!dirty && !shadow_dirty) { + r = 0; + break; + } + + /* 4 iterations is the worst case: + * 1 - initial iteration, dirty = true (between VFP and VSYNC) + * 2 - first VSYNC, dirty = true + * 3 - dirty = false, shadow_dirty = true + * 4 - shadow_dirty = false */ + if (i++ == 3) { + DSSERR("mgr(%d)->wait_for_go() not finishing\n", + mgr->id); + r = 0; + break; + } + + r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); + if (r == -ERESTARTSYS) + break; + + if (r) { + DSSERR("mgr(%d)->wait_for_go() timeout\n", mgr->id); + break; + } + } + + return r; +} + +int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) +{ + unsigned long timeout = msecs_to_jiffies(500); + enum omap_channel channel; + struct overlay_cache_data *oc; + struct omap_dss_device *dssdev; + u32 irq; + int r; + int i; + + if (!ovl->manager || !ovl->manager->device) + return 0; + + dssdev = ovl->manager->device; + + if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { + irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; + channel = OMAP_DSS_CHANNEL_DIGIT; + } else { + if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { + enum omap_dss_update_mode mode; + mode = dssdev->get_update_mode(dssdev); + if (mode != OMAP_DSS_UPDATE_AUTO) + return 0; + + irq = DISPC_IRQ_FRAMEDONE; + } else { + irq = DISPC_IRQ_VSYNC; + } + channel = OMAP_DSS_CHANNEL_LCD; + } + + oc = &dss_cache.overlay_cache[ovl->id]; + i = 0; + while (1) { + unsigned long flags; + bool shadow_dirty, dirty; + + spin_lock_irqsave(&dss_cache.lock, flags); + dirty = oc->dirty; + shadow_dirty = oc->shadow_dirty; + spin_unlock_irqrestore(&dss_cache.lock, flags); + + if (!dirty && !shadow_dirty) { + r = 0; + break; + } + + /* 4 iterations is the worst case: + * 1 - initial iteration, dirty = true (between VFP and VSYNC) + * 2 - first VSYNC, dirty = true + * 3 - dirty = false, shadow_dirty = true + * 4 - shadow_dirty = false */ + if (i++ == 3) { + DSSERR("ovl(%d)->wait_for_go() not finishing\n", + ovl->id); + r = 0; + break; + } + + r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); + if (r == -ERESTARTSYS) + break; + + if (r) { + DSSERR("ovl(%d)->wait_for_go() timeout\n", ovl->id); + break; + } + } + + return r; +} + +static int overlay_enabled(struct omap_overlay *ovl) +{ + return ovl->info.enabled && ovl->manager && ovl->manager->device; +} + +/* Is rect1 a subset of rect2? */ +static bool rectangle_subset(int x1, int y1, int w1, int h1, + int x2, int y2, int w2, int h2) +{ + if (x1 < x2 || y1 < y2) + return false; + + if (x1 + w1 > x2 + w2) + return false; + + if (y1 + h1 > y2 + h2) + return false; + + return true; +} + +/* Do rect1 and rect2 overlap? */ +static bool rectangle_intersects(int x1, int y1, int w1, int h1, + int x2, int y2, int w2, int h2) +{ + if (x1 >= x2 + w2) + return false; + + if (x2 >= x1 + w1) + return false; + + if (y1 >= y2 + h2) + return false; + + if (y2 >= y1 + h1) + return false; + + return true; +} + +static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc) +{ + if (oc->out_width != 0 && oc->width != oc->out_width) + return true; + + if (oc->out_height != 0 && oc->height != oc->out_height) + return true; + + return false; +} + +static int configure_overlay(enum omap_plane plane) +{ + struct overlay_cache_data *c; + struct manager_cache_data *mc; + u16 outw, outh; + u16 x, y, w, h; + u32 paddr; + int r; + + DSSDBGF("%d", plane); + + c = &dss_cache.overlay_cache[plane]; + + if (!c->enabled) { + dispc_enable_plane(plane, 0); + return 0; + } + + mc = &dss_cache.manager_cache[c->channel]; + + x = c->pos_x; + y = c->pos_y; + w = c->width; + h = c->height; + outw = c->out_width == 0 ? c->width : c->out_width; + outh = c->out_height == 0 ? c->height : c->out_height; + paddr = c->paddr; + + if (c->manual_update && mc->do_manual_update) { + unsigned bpp; + /* If the overlay is outside the update region, disable it */ + if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h, + x, y, outw, outh)) { + dispc_enable_plane(plane, 0); + return 0; + } + + switch (c->color_mode) { + case OMAP_DSS_COLOR_RGB16: + case OMAP_DSS_COLOR_ARGB16: + case OMAP_DSS_COLOR_YUV2: + case OMAP_DSS_COLOR_UYVY: + bpp = 16; + break; + + case OMAP_DSS_COLOR_RGB24P: + bpp = 24; + break; + + case OMAP_DSS_COLOR_RGB24U: + case OMAP_DSS_COLOR_ARGB32: + case OMAP_DSS_COLOR_RGBA32: + case OMAP_DSS_COLOR_RGBX32: + bpp = 32; + break; + + default: + BUG(); + } + + if (dispc_is_overlay_scaled(c)) { + /* If the overlay is scaled, the update area has + * already been enlarged to cover the whole overlay. We + * only need to adjust x/y here */ + x = c->pos_x - mc->x; + y = c->pos_y - mc->y; + } else { + if (mc->x > c->pos_x) { + x = 0; + w -= (mc->x - c->pos_x); + paddr += (mc->x - c->pos_x) * bpp / 8; + } else { + x = c->pos_x - mc->x; + } + + if (mc->y > c->pos_y) { + y = 0; + h -= (mc->y - c->pos_y); + paddr += (mc->y - c->pos_y) * c->screen_width * + bpp / 8; + } else { + y = c->pos_y - mc->y; + } + + if (mc->w < (x+w)) + w -= (x+w) - (mc->w); + + if (mc->h < (y+h)) + h -= (y+h) - (mc->h); + + outw = w; + outh = h; + } + } + + r = dispc_setup_plane(plane, + paddr, + c->screen_width, + x, y, + w, h, + outw, outh, + c->color_mode, + c->ilace, + c->rotation_type, + c->rotation, + c->mirror, + c->global_alpha); + + if (r) { + /* this shouldn't happen */ + DSSERR("dispc_setup_plane failed for ovl %d\n", plane); + dispc_enable_plane(plane, 0); + return r; + } + + dispc_enable_replication(plane, c->replication); + + dispc_set_burst_size(plane, c->burst_size); + dispc_setup_plane_fifo(plane, c->fifo_low, c->fifo_high); + + dispc_enable_plane(plane, 1); + + return 0; +} + +static void configure_manager(enum omap_channel channel) +{ + struct manager_cache_data *c; + + DSSDBGF("%d", channel); + + c = &dss_cache.manager_cache[channel]; + + dispc_set_trans_key(channel, c->trans_key_type, c->trans_key); + dispc_enable_trans_key(channel, c->trans_enabled); + dispc_enable_alpha_blending(channel, c->alpha_enabled); +} + +/* configure_dispc() tries to write values from cache to shadow registers. + * It writes only to those managers/overlays that are not busy. + * returns 0 if everything could be written to shadow registers. + * returns 1 if not everything could be written to shadow registers. */ +static int configure_dispc(void) +{ + struct overlay_cache_data *oc; + struct manager_cache_data *mc; + const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); + const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); + int i; + int r; + bool mgr_busy[2]; + bool mgr_go[2]; + bool busy; + + r = 0; + busy = false; + + mgr_busy[0] = dispc_go_busy(0); + mgr_busy[1] = dispc_go_busy(1); + mgr_go[0] = false; + mgr_go[1] = false; + + /* Commit overlay settings */ + for (i = 0; i < num_ovls; ++i) { + oc = &dss_cache.overlay_cache[i]; + mc = &dss_cache.manager_cache[oc->channel]; + + if (!oc->dirty) + continue; + + if (oc->manual_update && !mc->do_manual_update) + continue; + + if (mgr_busy[oc->channel]) { + busy = true; + continue; + } + + r = configure_overlay(i); + if (r) + DSSERR("configure_overlay %d failed\n", i); + + oc->dirty = false; + oc->shadow_dirty = true; + mgr_go[oc->channel] = true; + } + + /* Commit manager settings */ + for (i = 0; i < num_mgrs; ++i) { + mc = &dss_cache.manager_cache[i]; + + if (!mc->dirty) + continue; + + if (mc->manual_update && !mc->do_manual_update) + continue; + + if (mgr_busy[i]) { + busy = true; + continue; + } + + configure_manager(i); + mc->dirty = false; + mc->shadow_dirty = true; + mgr_go[i] = true; + } + + /* set GO */ + for (i = 0; i < num_mgrs; ++i) { + mc = &dss_cache.manager_cache[i]; + + if (!mgr_go[i]) + continue; + + /* We don't need GO with manual update display. LCD iface will + * always be turned off after frame, and new settings will be + * taken in to use at next update */ + if (!mc->manual_upd_display) + dispc_go(i); + } + + if (busy) + r = 1; + else + r = 0; + + return r; +} + +/* Configure dispc for partial update. Return possibly modified update + * area */ +void dss_setup_partial_planes(struct omap_dss_device *dssdev, + u16 *xi, u16 *yi, u16 *wi, u16 *hi) +{ + struct overlay_cache_data *oc; + struct manager_cache_data *mc; + const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); + struct omap_overlay_manager *mgr; + int i; + u16 x, y, w, h; + unsigned long flags; + + x = *xi; + y = *yi; + w = *wi; + h = *hi; + + DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", + *xi, *yi, *wi, *hi); + + mgr = dssdev->manager; + + if (!mgr) { + DSSDBG("no manager\n"); + return; + } + + spin_lock_irqsave(&dss_cache.lock, flags); + + /* We need to show the whole overlay if it is scaled. So look for + * those, and make the update area larger if found. + * Also mark the overlay cache dirty */ + for (i = 0; i < num_ovls; ++i) { + unsigned x1, y1, x2, y2; + unsigned outw, outh; + + oc = &dss_cache.overlay_cache[i]; + + if (oc->channel != mgr->id) + continue; + + oc->dirty = true; + + if (!oc->enabled) + continue; + + if (!dispc_is_overlay_scaled(oc)) + continue; + + outw = oc->out_width == 0 ? oc->width : oc->out_width; + outh = oc->out_height == 0 ? oc->height : oc->out_height; + + /* is the overlay outside the update region? */ + if (!rectangle_intersects(x, y, w, h, + oc->pos_x, oc->pos_y, + outw, outh)) + continue; + + /* if the overlay totally inside the update region? */ + if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh, + x, y, w, h)) + continue; + + if (x > oc->pos_x) + x1 = oc->pos_x; + else + x1 = x; + + if (y > oc->pos_y) + y1 = oc->pos_y; + else + y1 = y; + + if ((x + w) < (oc->pos_x + outw)) + x2 = oc->pos_x + outw; + else + x2 = x + w; + + if ((y + h) < (oc->pos_y + outh)) + y2 = oc->pos_y + outh; + else + y2 = y + h; + + x = x1; + y = y1; + w = x2 - x1; + h = y2 - y1; + + DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n", + i, x, y, w, h); + } + + mc = &dss_cache.manager_cache[mgr->id]; + mc->do_manual_update = true; + mc->x = x; + mc->y = y; + mc->w = w; + mc->h = h; + + configure_dispc(); + + mc->do_manual_update = false; + + spin_unlock_irqrestore(&dss_cache.lock, flags); + + *xi = x; + *yi = y; + *wi = w; + *hi = h; +} + +void dss_start_update(struct omap_dss_device *dssdev) +{ + struct manager_cache_data *mc; + struct overlay_cache_data *oc; + const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); + const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); + struct omap_overlay_manager *mgr; + int i; + + mgr = dssdev->manager; + + for (i = 0; i < num_ovls; ++i) { + oc = &dss_cache.overlay_cache[i]; + if (oc->channel != mgr->id) + continue; + + oc->shadow_dirty = false; + } + + for (i = 0; i < num_mgrs; ++i) { + mc = &dss_cache.manager_cache[i]; + if (mgr->id != i) + continue; + + mc->shadow_dirty = false; + } + + dispc_enable_lcd_out(1); +} + +static void dss_apply_irq_handler(void *data, u32 mask) +{ + struct manager_cache_data *mc; + struct overlay_cache_data *oc; + const int num_ovls = ARRAY_SIZE(dss_cache.overlay_cache); + const int num_mgrs = ARRAY_SIZE(dss_cache.manager_cache); + int i, r; + bool mgr_busy[2]; + + mgr_busy[0] = dispc_go_busy(0); + mgr_busy[1] = dispc_go_busy(1); + + spin_lock(&dss_cache.lock); + + for (i = 0; i < num_ovls; ++i) { + oc = &dss_cache.overlay_cache[i]; + if (!mgr_busy[oc->channel]) + oc->shadow_dirty = false; + } + + for (i = 0; i < num_mgrs; ++i) { + mc = &dss_cache.manager_cache[i]; + if (!mgr_busy[i]) + mc->shadow_dirty = false; + } + + r = configure_dispc(); + if (r == 1) + goto end; + + /* re-read busy flags */ + mgr_busy[0] = dispc_go_busy(0); + mgr_busy[1] = dispc_go_busy(1); + + /* keep running as long as there are busy managers, so that + * we can collect overlay-applied information */ + for (i = 0; i < num_mgrs; ++i) { + if (mgr_busy[i]) + goto end; + } + + omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, + DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | + DISPC_IRQ_EVSYNC_EVEN); + dss_cache.irq_enabled = false; + +end: + spin_unlock(&dss_cache.lock); +} + +static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) +{ + struct overlay_cache_data *oc; + struct manager_cache_data *mc; + int i; + struct omap_overlay *ovl; + int num_planes_enabled = 0; + bool use_fifomerge; + unsigned long flags; + int r; + + DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); + + spin_lock_irqsave(&dss_cache.lock, flags); + + /* Configure overlays */ + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_dss_device *dssdev; + + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + oc = &dss_cache.overlay_cache[ovl->id]; + + if (!overlay_enabled(ovl)) { + if (oc->enabled) { + oc->enabled = false; + oc->dirty = true; + } + continue; + } + + if (!ovl->info_dirty) { + if (oc->enabled) + ++num_planes_enabled; + continue; + } + + dssdev = ovl->manager->device; + + if (dss_check_overlay(ovl, dssdev)) { + if (oc->enabled) { + oc->enabled = false; + oc->dirty = true; + } + continue; + } + + ovl->info_dirty = false; + oc->dirty = true; + + oc->paddr = ovl->info.paddr; + oc->vaddr = ovl->info.vaddr; + oc->screen_width = ovl->info.screen_width; + oc->width = ovl->info.width; + oc->height = ovl->info.height; + oc->color_mode = ovl->info.color_mode; + oc->rotation = ovl->info.rotation; + oc->rotation_type = ovl->info.rotation_type; + oc->mirror = ovl->info.mirror; + oc->pos_x = ovl->info.pos_x; + oc->pos_y = ovl->info.pos_y; + oc->out_width = ovl->info.out_width; + oc->out_height = ovl->info.out_height; + oc->global_alpha = ovl->info.global_alpha; + + oc->replication = + dss_use_replication(dssdev, ovl->info.color_mode); + + oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC; + + oc->channel = ovl->manager->id; + + oc->enabled = true; + + oc->manual_update = + dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && + dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; + + ++num_planes_enabled; + } + + /* Configure managers */ + list_for_each_entry(mgr, &manager_list, list) { + struct omap_dss_device *dssdev; + + if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC)) + continue; + + mc = &dss_cache.manager_cache[mgr->id]; + + if (mgr->device_changed) { + mgr->device_changed = false; + mgr->info_dirty = true; + } + + if (!mgr->info_dirty) + continue; + + if (!mgr->device) + continue; + + dssdev = mgr->device; + + mgr->info_dirty = false; + mc->dirty = true; + + mc->default_color = mgr->info.default_color; + mc->trans_key_type = mgr->info.trans_key_type; + mc->trans_key = mgr->info.trans_key; + mc->trans_enabled = mgr->info.trans_enabled; + mc->alpha_enabled = mgr->info.alpha_enabled; + + mc->manual_upd_display = + dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; + + mc->manual_update = + dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && + dssdev->get_update_mode(dssdev) != OMAP_DSS_UPDATE_AUTO; + } + + /* XXX TODO: Try to get fifomerge working. The problem is that it + * affects both managers, not individually but at the same time. This + * means the change has to be well synchronized. I guess the proper way + * is to have a two step process for fifo merge: + * fifomerge enable: + * 1. disable other planes, leaving one plane enabled + * 2. wait until the planes are disabled on HW + * 3. config merged fifo thresholds, enable fifomerge + * fifomerge disable: + * 1. config unmerged fifo thresholds, disable fifomerge + * 2. wait until fifo changes are in HW + * 3. enable planes + */ + use_fifomerge = false; + + /* Configure overlay fifos */ + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_dss_device *dssdev; + u32 size; + + ovl = omap_dss_get_overlay(i); + + if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) + continue; + + oc = &dss_cache.overlay_cache[ovl->id]; + + if (!oc->enabled) + continue; + + dssdev = ovl->manager->device; + + size = dispc_get_plane_fifo_size(ovl->id); + if (use_fifomerge) + size *= 3; + + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_DPI: + case OMAP_DISPLAY_TYPE_DBI: + case OMAP_DISPLAY_TYPE_SDI: + case OMAP_DISPLAY_TYPE_VENC: + default_get_overlay_fifo_thresholds(ovl->id, size, + &oc->burst_size, &oc->fifo_low, + &oc->fifo_high); + break; +#ifdef CONFIG_OMAP2_DSS_DSI + case OMAP_DISPLAY_TYPE_DSI: + dsi_get_overlay_fifo_thresholds(ovl->id, size, + &oc->burst_size, &oc->fifo_low, + &oc->fifo_high); + break; +#endif + default: + BUG(); + } + } + + r = 0; + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + if (!dss_cache.irq_enabled) { + r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, + DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | + DISPC_IRQ_EVSYNC_EVEN); + dss_cache.irq_enabled = true; + } + configure_dispc(); + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + spin_unlock_irqrestore(&dss_cache.lock, flags); + + return r; +} + +static int dss_check_manager(struct omap_overlay_manager *mgr) +{ + /* OMAP supports only graphics source transparency color key and alpha + * blending simultaneously. See TRM 15.4.2.4.2.2 Alpha Mode */ + + if (mgr->info.alpha_enabled && mgr->info.trans_enabled && + mgr->info.trans_key_type != OMAP_DSS_COLOR_KEY_GFX_DST) + return -EINVAL; + + return 0; +} + +static int omap_dss_mgr_set_info(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info) +{ + int r; + struct omap_overlay_manager_info old_info; + + old_info = mgr->info; + mgr->info = *info; + + r = dss_check_manager(mgr); + if (r) { + mgr->info = old_info; + return r; + } + + mgr->info_dirty = true; + + return 0; +} + +static void omap_dss_mgr_get_info(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info) +{ + *info = mgr->info; +} + +static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) +{ + ++num_managers; + list_add_tail(&manager->list, &manager_list); +} + +int dss_init_overlay_managers(struct platform_device *pdev) +{ + int i, r; + + spin_lock_init(&dss_cache.lock); + + INIT_LIST_HEAD(&manager_list); + + num_managers = 0; + + for (i = 0; i < 2; ++i) { + struct omap_overlay_manager *mgr; + mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); + + BUG_ON(mgr == NULL); + + switch (i) { + case 0: + mgr->name = "lcd"; + mgr->id = OMAP_DSS_CHANNEL_LCD; + mgr->supported_displays = + OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | + OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI; + break; + case 1: + mgr->name = "tv"; + mgr->id = OMAP_DSS_CHANNEL_DIGIT; + mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC; + break; + } + + mgr->set_device = &omap_dss_set_device; + mgr->unset_device = &omap_dss_unset_device; + mgr->apply = &omap_dss_mgr_apply; + mgr->set_manager_info = &omap_dss_mgr_set_info; + mgr->get_manager_info = &omap_dss_mgr_get_info; + mgr->wait_for_go = &dss_mgr_wait_for_go; + + mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC; + + dss_overlay_setup_dispc_manager(mgr); + + omap_dss_add_overlay_manager(mgr); + + r = kobject_init_and_add(&mgr->kobj, &manager_ktype, + &pdev->dev.kobj, "manager%d", i); + + if (r) { + DSSERR("failed to create sysfs file\n"); + continue; + } + } + +#ifdef L4_EXAMPLE + { + int omap_dss_mgr_apply_l4(struct omap_overlay_manager *mgr) + { + DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); + + return 0; + } + + struct omap_overlay_manager *mgr; + mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); + + BUG_ON(mgr == NULL); + + mgr->name = "l4"; + mgr->supported_displays = + OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI; + + mgr->set_device = &omap_dss_set_device; + mgr->unset_device = &omap_dss_unset_device; + mgr->apply = &omap_dss_mgr_apply_l4; + mgr->set_manager_info = &omap_dss_mgr_set_info; + mgr->get_manager_info = &omap_dss_mgr_get_info; + + dss_overlay_setup_l4_manager(mgr); + + omap_dss_add_overlay_manager(mgr); + + r = kobject_init_and_add(&mgr->kobj, &manager_ktype, + &pdev->dev.kobj, "managerl4"); + + if (r) + DSSERR("failed to create sysfs file\n"); + } +#endif + + return 0; +} + +void dss_uninit_overlay_managers(struct platform_device *pdev) +{ + struct omap_overlay_manager *mgr; + + while (!list_empty(&manager_list)) { + mgr = list_first_entry(&manager_list, + struct omap_overlay_manager, list); + list_del(&mgr->list); + kobject_del(&mgr->kobj); + kobject_put(&mgr->kobj); + kfree(mgr); + } + + num_managers = 0; +} + +int omap_dss_get_num_overlay_managers(void) +{ + return num_managers; +} +EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); + +struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) +{ + int i = 0; + struct omap_overlay_manager *mgr; + + list_for_each_entry(mgr, &manager_list, list) { + if (i++ == num) + return mgr; + } + + return NULL; +} +EXPORT_SYMBOL(omap_dss_get_overlay_manager); + diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c new file mode 100644 index 00000000000..b7f9a733984 --- /dev/null +++ b/drivers/video/omap2/dss/overlay.c @@ -0,0 +1,680 @@ +/* + * linux/drivers/video/omap2/dss/overlay.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "OVERLAY" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/sysfs.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#include <plat/display.h> +#include <plat/cpu.h> + +#include "dss.h" + +static int num_overlays; +static struct list_head overlay_list; + +static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name); +} + +static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", + ovl->manager ? ovl->manager->name : "<none>"); +} + +static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, + size_t size) +{ + int i, r; + struct omap_overlay_manager *mgr = NULL; + struct omap_overlay_manager *old_mgr; + int len = size; + + if (buf[size-1] == '\n') + --len; + + if (len > 0) { + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + mgr = omap_dss_get_overlay_manager(i); + + if (strncmp(buf, mgr->name, len) == 0) + break; + + mgr = NULL; + } + } + + if (len > 0 && mgr == NULL) + return -EINVAL; + + if (mgr) + DSSDBG("manager %s found\n", mgr->name); + + if (mgr == ovl->manager) + return size; + + old_mgr = ovl->manager; + + /* detach old manager */ + if (old_mgr) { + r = ovl->unset_manager(ovl); + if (r) { + DSSERR("detach failed\n"); + return r; + } + + r = old_mgr->apply(old_mgr); + if (r) + return r; + } + + if (mgr) { + r = ovl->set_manager(ovl, mgr); + if (r) { + DSSERR("Failed to attach overlay\n"); + return r; + } + + r = mgr->apply(mgr); + if (r) + return r; + } + + return size; +} + +static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d,%d\n", + ovl->info.width, ovl->info.height); +} + +static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width); +} + +static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d,%d\n", + ovl->info.pos_x, ovl->info.pos_y); +} + +static ssize_t overlay_position_store(struct omap_overlay *ovl, + const char *buf, size_t size) +{ + int r; + char *last; + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + + info.pos_x = simple_strtoul(buf, &last, 10); + ++last; + if (last - buf >= size) + return -EINVAL; + + info.pos_y = simple_strtoul(last, &last, 10); + + r = ovl->set_overlay_info(ovl, &info); + if (r) + return r; + + if (ovl->manager) { + r = ovl->manager->apply(ovl->manager); + if (r) + return r; + } + + return size; +} + +static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d,%d\n", + ovl->info.out_width, ovl->info.out_height); +} + +static ssize_t overlay_output_size_store(struct omap_overlay *ovl, + const char *buf, size_t size) +{ + int r; + char *last; + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + + info.out_width = simple_strtoul(buf, &last, 10); + ++last; + if (last - buf >= size) + return -EINVAL; + + info.out_height = simple_strtoul(last, &last, 10); + + r = ovl->set_overlay_info(ovl, &info); + if (r) + return r; + + if (ovl->manager) { + r = ovl->manager->apply(ovl->manager); + if (r) + return r; + } + + return size; +} + +static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled); +} + +static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf, + size_t size) +{ + int r; + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + + info.enabled = simple_strtoul(buf, NULL, 10); + + r = ovl->set_overlay_info(ovl, &info); + if (r) + return r; + + if (ovl->manager) { + r = ovl->manager->apply(ovl->manager); + if (r) + return r; + } + + return size; +} + +static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", + ovl->info.global_alpha); +} + +static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl, + const char *buf, size_t size) +{ + int r; + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + + /* Video1 plane does not support global alpha + * to always make it 255 completely opaque + */ + if (ovl->id == OMAP_DSS_VIDEO1) + info.global_alpha = 255; + else + info.global_alpha = simple_strtoul(buf, NULL, 10); + + r = ovl->set_overlay_info(ovl, &info); + if (r) + return r; + + if (ovl->manager) { + r = ovl->manager->apply(ovl->manager); + if (r) + return r; + } + + return size; +} + +struct overlay_attribute { + struct attribute attr; + ssize_t (*show)(struct omap_overlay *, char *); + ssize_t (*store)(struct omap_overlay *, const char *, size_t); +}; + +#define OVERLAY_ATTR(_name, _mode, _show, _store) \ + struct overlay_attribute overlay_attr_##_name = \ + __ATTR(_name, _mode, _show, _store) + +static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL); +static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR, + overlay_manager_show, overlay_manager_store); +static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL); +static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL); +static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR, + overlay_position_show, overlay_position_store); +static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR, + overlay_output_size_show, overlay_output_size_store); +static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR, + overlay_enabled_show, overlay_enabled_store); +static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR, + overlay_global_alpha_show, overlay_global_alpha_store); + +static struct attribute *overlay_sysfs_attrs[] = { + &overlay_attr_name.attr, + &overlay_attr_manager.attr, + &overlay_attr_input_size.attr, + &overlay_attr_screen_width.attr, + &overlay_attr_position.attr, + &overlay_attr_output_size.attr, + &overlay_attr_enabled.attr, + &overlay_attr_global_alpha.attr, + NULL +}; + +static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct omap_overlay *overlay; + struct overlay_attribute *overlay_attr; + + overlay = container_of(kobj, struct omap_overlay, kobj); + overlay_attr = container_of(attr, struct overlay_attribute, attr); + + if (!overlay_attr->show) + return -ENOENT; + + return overlay_attr->show(overlay, buf); +} + +static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t size) +{ + struct omap_overlay *overlay; + struct overlay_attribute *overlay_attr; + + overlay = container_of(kobj, struct omap_overlay, kobj); + overlay_attr = container_of(attr, struct overlay_attribute, attr); + + if (!overlay_attr->store) + return -ENOENT; + + return overlay_attr->store(overlay, buf, size); +} + +static struct sysfs_ops overlay_sysfs_ops = { + .show = overlay_attr_show, + .store = overlay_attr_store, +}; + +static struct kobj_type overlay_ktype = { + .sysfs_ops = &overlay_sysfs_ops, + .default_attrs = overlay_sysfs_attrs, +}; + +/* Check if overlay parameters are compatible with display */ +int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev) +{ + struct omap_overlay_info *info; + u16 outw, outh; + u16 dw, dh; + + if (!dssdev) + return 0; + + if (!ovl->info.enabled) + return 0; + + info = &ovl->info; + + if (info->paddr == 0) { + DSSDBG("check_overlay failed: paddr 0\n"); + return -EINVAL; + } + + dssdev->get_resolution(dssdev, &dw, &dh); + + DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n", + ovl->id, + info->pos_x, info->pos_y, + info->width, info->height, + info->out_width, info->out_height, + dw, dh); + + if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { + outw = info->width; + outh = info->height; + } else { + if (info->out_width == 0) + outw = info->width; + else + outw = info->out_width; + + if (info->out_height == 0) + outh = info->height; + else + outh = info->out_height; + } + + if (dw < info->pos_x + outw) { + DSSDBG("check_overlay failed 1: %d < %d + %d\n", + dw, info->pos_x, outw); + return -EINVAL; + } + + if (dh < info->pos_y + outh) { + DSSDBG("check_overlay failed 2: %d < %d + %d\n", + dh, info->pos_y, outh); + return -EINVAL; + } + + if ((ovl->supported_modes & info->color_mode) == 0) { + DSSERR("overlay doesn't support mode %d\n", info->color_mode); + return -EINVAL; + } + + return 0; +} + +static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, + struct omap_overlay_info *info) +{ + int r; + struct omap_overlay_info old_info; + + old_info = ovl->info; + ovl->info = *info; + + if (ovl->manager) { + r = dss_check_overlay(ovl, ovl->manager->device); + if (r) { + ovl->info = old_info; + return r; + } + } + + ovl->info_dirty = true; + + return 0; +} + +static void dss_ovl_get_overlay_info(struct omap_overlay *ovl, + struct omap_overlay_info *info) +{ + *info = ovl->info; +} + +static int dss_ovl_wait_for_go(struct omap_overlay *ovl) +{ + return dss_mgr_wait_for_go_ovl(ovl); +} + +static int omap_dss_set_manager(struct omap_overlay *ovl, + struct omap_overlay_manager *mgr) +{ + if (!mgr) + return -EINVAL; + + if (ovl->manager) { + DSSERR("overlay '%s' already has a manager '%s'\n", + ovl->name, ovl->manager->name); + return -EINVAL; + } + + if (ovl->info.enabled) { + DSSERR("overlay has to be disabled to change the manager\n"); + return -EINVAL; + } + + ovl->manager = mgr; + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + /* XXX: on manual update display, in auto update mode, a bug happens + * here. When an overlay is first enabled on LCD, then it's disabled, + * and the manager is changed to TV, we sometimes get SYNC_LOST_DIGIT + * errors. Waiting before changing the channel_out fixes it. I'm + * guessing that the overlay is still somehow being used for the LCD, + * but I don't understand how or why. */ + msleep(40); + dispc_set_channel_out(ovl->id, mgr->id); + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + return 0; +} + +static int omap_dss_unset_manager(struct omap_overlay *ovl) +{ + int r; + + if (!ovl->manager) { + DSSERR("failed to detach overlay: manager not set\n"); + return -EINVAL; + } + + if (ovl->info.enabled) { + DSSERR("overlay has to be disabled to unset the manager\n"); + return -EINVAL; + } + + r = ovl->wait_for_go(ovl); + if (r) + return r; + + ovl->manager = NULL; + + return 0; +} + +int omap_dss_get_num_overlays(void) +{ + return num_overlays; +} +EXPORT_SYMBOL(omap_dss_get_num_overlays); + +struct omap_overlay *omap_dss_get_overlay(int num) +{ + int i = 0; + struct omap_overlay *ovl; + + list_for_each_entry(ovl, &overlay_list, list) { + if (i++ == num) + return ovl; + } + + return NULL; +} +EXPORT_SYMBOL(omap_dss_get_overlay); + +static void omap_dss_add_overlay(struct omap_overlay *overlay) +{ + ++num_overlays; + list_add_tail(&overlay->list, &overlay_list); +} + +static struct omap_overlay *dispc_overlays[3]; + +void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr) +{ + mgr->num_overlays = 3; + mgr->overlays = dispc_overlays; +} + +#ifdef L4_EXAMPLE +static struct omap_overlay *l4_overlays[1]; +void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr) +{ + mgr->num_overlays = 1; + mgr->overlays = l4_overlays; +} +#endif + +void dss_init_overlays(struct platform_device *pdev) +{ + int i, r; + + INIT_LIST_HEAD(&overlay_list); + + num_overlays = 0; + + for (i = 0; i < 3; ++i) { + struct omap_overlay *ovl; + ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); + + BUG_ON(ovl == NULL); + + switch (i) { + case 0: + ovl->name = "gfx"; + ovl->id = OMAP_DSS_GFX; + ovl->supported_modes = cpu_is_omap34xx() ? + OMAP_DSS_COLOR_GFX_OMAP3 : + OMAP_DSS_COLOR_GFX_OMAP2; + ovl->caps = OMAP_DSS_OVL_CAP_DISPC; + ovl->info.global_alpha = 255; + break; + case 1: + ovl->name = "vid1"; + ovl->id = OMAP_DSS_VIDEO1; + ovl->supported_modes = cpu_is_omap34xx() ? + OMAP_DSS_COLOR_VID1_OMAP3 : + OMAP_DSS_COLOR_VID_OMAP2; + ovl->caps = OMAP_DSS_OVL_CAP_SCALE | + OMAP_DSS_OVL_CAP_DISPC; + ovl->info.global_alpha = 255; + break; + case 2: + ovl->name = "vid2"; + ovl->id = OMAP_DSS_VIDEO2; + ovl->supported_modes = cpu_is_omap34xx() ? + OMAP_DSS_COLOR_VID2_OMAP3 : + OMAP_DSS_COLOR_VID_OMAP2; + ovl->caps = OMAP_DSS_OVL_CAP_SCALE | + OMAP_DSS_OVL_CAP_DISPC; + ovl->info.global_alpha = 255; + break; + } + + ovl->set_manager = &omap_dss_set_manager; + ovl->unset_manager = &omap_dss_unset_manager; + ovl->set_overlay_info = &dss_ovl_set_overlay_info; + ovl->get_overlay_info = &dss_ovl_get_overlay_info; + ovl->wait_for_go = &dss_ovl_wait_for_go; + + omap_dss_add_overlay(ovl); + + r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, + &pdev->dev.kobj, "overlay%d", i); + + if (r) { + DSSERR("failed to create sysfs file\n"); + continue; + } + + dispc_overlays[i] = ovl; + } + +#ifdef L4_EXAMPLE + { + struct omap_overlay *ovl; + ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); + + BUG_ON(ovl == NULL); + + ovl->name = "l4"; + ovl->supported_modes = OMAP_DSS_COLOR_RGB24U; + + ovl->set_manager = &omap_dss_set_manager; + ovl->unset_manager = &omap_dss_unset_manager; + ovl->set_overlay_info = &dss_ovl_set_overlay_info; + ovl->get_overlay_info = &dss_ovl_get_overlay_info; + + omap_dss_add_overlay(ovl); + + r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, + &pdev->dev.kobj, "overlayl4"); + + if (r) + DSSERR("failed to create sysfs file\n"); + + l4_overlays[0] = ovl; + } +#endif +} + +/* connect overlays to the new device, if not already connected. if force + * selected, connect always. */ +void dss_recheck_connections(struct omap_dss_device *dssdev, bool force) +{ + int i; + struct omap_overlay_manager *lcd_mgr; + struct omap_overlay_manager *tv_mgr; + struct omap_overlay_manager *mgr = NULL; + + lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); + tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); + + if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) { + if (!lcd_mgr->device || force) { + if (lcd_mgr->device) + lcd_mgr->unset_device(lcd_mgr); + lcd_mgr->set_device(lcd_mgr, dssdev); + mgr = lcd_mgr; + } + } + + if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { + if (!tv_mgr->device || force) { + if (tv_mgr->device) + tv_mgr->unset_device(tv_mgr); + tv_mgr->set_device(tv_mgr, dssdev); + mgr = tv_mgr; + } + } + + if (mgr) { + for (i = 0; i < 3; i++) { + struct omap_overlay *ovl; + ovl = omap_dss_get_overlay(i); + if (!ovl->manager || force) { + if (ovl->manager) + omap_dss_unset_manager(ovl); + omap_dss_set_manager(ovl, mgr); + } + } + } +} + +void dss_uninit_overlays(struct platform_device *pdev) +{ + struct omap_overlay *ovl; + + while (!list_empty(&overlay_list)) { + ovl = list_first_entry(&overlay_list, + struct omap_overlay, list); + list_del(&ovl->list); + kobject_del(&ovl->kobj); + kobject_put(&ovl->kobj); + kfree(ovl); + } + + num_overlays = 0; +} + diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c new file mode 100644 index 00000000000..d0b3006ad8a --- /dev/null +++ b/drivers/video/omap2/dss/rfbi.c @@ -0,0 +1,1309 @@ +/* + * linux/drivers/video/omap2/dss/rfbi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "RFBI" + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/kfifo.h> +#include <linux/ktime.h> +#include <linux/hrtimer.h> +#include <linux/seq_file.h> + +#include <plat/display.h> +#include "dss.h" + +/*#define MEASURE_PERF*/ + +#define RFBI_BASE 0x48050800 + +struct rfbi_reg { u16 idx; }; + +#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) + +#define RFBI_REVISION RFBI_REG(0x0000) +#define RFBI_SYSCONFIG RFBI_REG(0x0010) +#define RFBI_SYSSTATUS RFBI_REG(0x0014) +#define RFBI_CONTROL RFBI_REG(0x0040) +#define RFBI_PIXEL_CNT RFBI_REG(0x0044) +#define RFBI_LINE_NUMBER RFBI_REG(0x0048) +#define RFBI_CMD RFBI_REG(0x004c) +#define RFBI_PARAM RFBI_REG(0x0050) +#define RFBI_DATA RFBI_REG(0x0054) +#define RFBI_READ RFBI_REG(0x0058) +#define RFBI_STATUS RFBI_REG(0x005c) + +#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) +#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) +#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) +#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) +#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) +#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) + +#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) +#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) + +#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) + +#define REG_FLD_MOD(idx, val, start, end) \ + rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) + +/* To work around an RFBI transfer rate limitation */ +#define OMAP_RFBI_RATE_LIMIT 1 + +enum omap_rfbi_cycleformat { + OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, + OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, + OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, + OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, +}; + +enum omap_rfbi_datatype { + OMAP_DSS_RFBI_DATATYPE_12 = 0, + OMAP_DSS_RFBI_DATATYPE_16 = 1, + OMAP_DSS_RFBI_DATATYPE_18 = 2, + OMAP_DSS_RFBI_DATATYPE_24 = 3, +}; + +enum omap_rfbi_parallelmode { + OMAP_DSS_RFBI_PARALLELMODE_8 = 0, + OMAP_DSS_RFBI_PARALLELMODE_9 = 1, + OMAP_DSS_RFBI_PARALLELMODE_12 = 2, + OMAP_DSS_RFBI_PARALLELMODE_16 = 3, +}; + +enum update_cmd { + RFBI_CMD_UPDATE = 0, + RFBI_CMD_SYNC = 1, +}; + +static int rfbi_convert_timings(struct rfbi_timings *t); +static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); +static void process_cmd_fifo(void); + +static struct { + void __iomem *base; + + unsigned long l4_khz; + + enum omap_rfbi_datatype datatype; + enum omap_rfbi_parallelmode parallelmode; + + enum omap_rfbi_te_mode te_mode; + int te_enabled; + + void (*framedone_callback)(void *data); + void *framedone_callback_data; + + struct omap_dss_device *dssdev[2]; + + struct kfifo *cmd_fifo; + spinlock_t cmd_lock; + struct completion cmd_done; + atomic_t cmd_fifo_full; + atomic_t cmd_pending; +#ifdef MEASURE_PERF + unsigned perf_bytes; + ktime_t perf_setup_time; + ktime_t perf_start_time; +#endif +} rfbi; + +struct update_region { + u16 x; + u16 y; + u16 w; + u16 h; +}; + +struct update_param { + u8 rfbi_module; + u8 cmd; + + union { + struct update_region r; + struct completion *sync; + } par; +}; + +static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) +{ + __raw_writel(val, rfbi.base + idx.idx); +} + +static inline u32 rfbi_read_reg(const struct rfbi_reg idx) +{ + return __raw_readl(rfbi.base + idx.idx); +} + +static void rfbi_enable_clocks(bool enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + else + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +} + +void omap_rfbi_write_command(const void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + const u8 *b = buf; + for (; len; len--) + rfbi_write_reg(RFBI_CMD, *b++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + const u16 *w = buf; + BUG_ON(len & 1); + for (; len; len -= 2) + rfbi_write_reg(RFBI_CMD, *w++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_command); + +void omap_rfbi_read_data(void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + u8 *b = buf; + for (; len; len--) { + rfbi_write_reg(RFBI_READ, 0); + *b++ = rfbi_read_reg(RFBI_READ); + } + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + u16 *w = buf; + BUG_ON(len & ~1); + for (; len; len -= 2) { + rfbi_write_reg(RFBI_READ, 0); + *w++ = rfbi_read_reg(RFBI_READ); + } + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_read_data); + +void omap_rfbi_write_data(const void *buf, u32 len) +{ + rfbi_enable_clocks(1); + switch (rfbi.parallelmode) { + case OMAP_DSS_RFBI_PARALLELMODE_8: + { + const u8 *b = buf; + for (; len; len--) + rfbi_write_reg(RFBI_PARAM, *b++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_16: + { + const u16 *w = buf; + BUG_ON(len & 1); + for (; len; len -= 2) + rfbi_write_reg(RFBI_PARAM, *w++); + break; + } + + case OMAP_DSS_RFBI_PARALLELMODE_9: + case OMAP_DSS_RFBI_PARALLELMODE_12: + default: + BUG(); + + } + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_data); + +void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, + u16 x, u16 y, + u16 w, u16 h) +{ + int start_offset = scr_width * y + x; + int horiz_offset = scr_width - w; + int i; + + rfbi_enable_clocks(1); + + if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { + const u16 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + const u8 __iomem *b = (const u8 __iomem *)pd; + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); + ++pd; + } + pd += horiz_offset; + } + } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { + const u32 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + const u8 __iomem *b = (const u8 __iomem *)pd; + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); + rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); + ++pd; + } + pd += horiz_offset; + } + } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && + rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { + const u16 __iomem *pd = buf; + pd += start_offset; + + for (; h; --h) { + for (i = 0; i < w; ++i) { + rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); + ++pd; + } + pd += horiz_offset; + } + } else { + BUG(); + } + + rfbi_enable_clocks(0); +} +EXPORT_SYMBOL(omap_rfbi_write_pixels); + +#ifdef MEASURE_PERF +static void perf_mark_setup(void) +{ + rfbi.perf_setup_time = ktime_get(); +} + +static void perf_mark_start(void) +{ + rfbi.perf_start_time = ktime_get(); +} + +static void perf_show(const char *name) +{ + ktime_t t, setup_time, trans_time; + u32 total_bytes; + u32 setup_us, trans_us, total_us; + + t = ktime_get(); + + setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); + setup_us = (u32)ktime_to_us(setup_time); + if (setup_us == 0) + setup_us = 1; + + trans_time = ktime_sub(t, rfbi.perf_start_time); + trans_us = (u32)ktime_to_us(trans_time); + if (trans_us == 0) + trans_us = 1; + + total_us = setup_us + trans_us; + + total_bytes = rfbi.perf_bytes; + + DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " + "%u kbytes/sec\n", + name, + setup_us, + trans_us, + total_us, + 1000*1000 / total_us, + total_bytes, + total_bytes * 1000 / total_us); +} +#else +#define perf_mark_setup() +#define perf_mark_start() +#define perf_show(x) +#endif + +void rfbi_transfer_area(u16 width, u16 height, + void (callback)(void *data), void *data) +{ + u32 l; + + /*BUG_ON(callback == 0);*/ + BUG_ON(rfbi.framedone_callback != NULL); + + DSSDBG("rfbi_transfer_area %dx%d\n", width, height); + + dispc_set_lcd_size(width, height); + + dispc_enable_lcd_out(1); + + rfbi.framedone_callback = callback; + rfbi.framedone_callback_data = data; + + rfbi_enable_clocks(1); + + rfbi_write_reg(RFBI_PIXEL_CNT, width * height); + + l = rfbi_read_reg(RFBI_CONTROL); + l = FLD_MOD(l, 1, 0, 0); /* enable */ + if (!rfbi.te_enabled) + l = FLD_MOD(l, 1, 4, 4); /* ITE */ + + perf_mark_start(); + + rfbi_write_reg(RFBI_CONTROL, l); +} + +static void framedone_callback(void *data, u32 mask) +{ + void (*callback)(void *data); + + DSSDBG("FRAMEDONE\n"); + + perf_show("DISPC"); + + REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); + + rfbi_enable_clocks(0); + + callback = rfbi.framedone_callback; + rfbi.framedone_callback = NULL; + + /*callback(rfbi.framedone_callback_data);*/ + + atomic_set(&rfbi.cmd_pending, 0); + + process_cmd_fifo(); +} + +#if 1 /* VERBOSE */ +static void rfbi_print_timings(void) +{ + u32 l; + u32 time; + + l = rfbi_read_reg(RFBI_CONFIG(0)); + time = 1000000000 / rfbi.l4_khz; + if (l & (1 << 4)) + time *= 2; + + DSSDBG("Tick time %u ps\n", time); + l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); + DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " + "REONTIME %d, REOFFTIME %d\n", + l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, + (l >> 20) & 0x0f, (l >> 24) & 0x3f); + + l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); + DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " + "ACCESSTIME %d\n", + (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, + (l >> 22) & 0x3f); +} +#else +static void rfbi_print_timings(void) {} +#endif + + + + +static u32 extif_clk_period; + +static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) +{ + int bus_tick = extif_clk_period * div; + return (ps + bus_tick - 1) / bus_tick * bus_tick; +} + +static int calc_reg_timing(struct rfbi_timings *t, int div) +{ + t->clk_div = div; + + t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); + + t->we_on_time = round_to_extif_ticks(t->we_on_time, div); + t->we_off_time = round_to_extif_ticks(t->we_off_time, div); + t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); + + t->re_on_time = round_to_extif_ticks(t->re_on_time, div); + t->re_off_time = round_to_extif_ticks(t->re_off_time, div); + t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); + + t->access_time = round_to_extif_ticks(t->access_time, div); + t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); + t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); + + DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", + t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); + DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", + t->we_on_time, t->we_off_time, t->re_cycle_time, + t->we_cycle_time); + DSSDBG("[reg]rdaccess %d cspulse %d\n", + t->access_time, t->cs_pulse_width); + + return rfbi_convert_timings(t); +} + +static int calc_extif_timings(struct rfbi_timings *t) +{ + u32 max_clk_div; + int div; + + rfbi_get_clk_info(&extif_clk_period, &max_clk_div); + for (div = 1; div <= max_clk_div; div++) { + if (calc_reg_timing(t, div) == 0) + break; + } + + if (div <= max_clk_div) + return 0; + + DSSERR("can't setup timings\n"); + return -1; +} + + +void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) +{ + int r; + + if (!t->converted) { + r = calc_extif_timings(t); + if (r < 0) + DSSERR("Failed to calc timings\n"); + } + + BUG_ON(!t->converted); + + rfbi_enable_clocks(1); + rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); + rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); + + /* TIMEGRANULARITY */ + REG_FLD_MOD(RFBI_CONFIG(rfbi_module), + (t->tim[2] ? 1 : 0), 4, 4); + + rfbi_print_timings(); + rfbi_enable_clocks(0); +} + +static int ps_to_rfbi_ticks(int time, int div) +{ + unsigned long tick_ps; + int ret; + + /* Calculate in picosecs to yield more exact results */ + tick_ps = 1000000000 / (rfbi.l4_khz) * div; + + ret = (time + tick_ps - 1) / tick_ps; + + return ret; +} + +#ifdef OMAP_RFBI_RATE_LIMIT +unsigned long rfbi_get_max_tx_rate(void) +{ + unsigned long l4_rate, dss1_rate; + int min_l4_ticks = 0; + int i; + + /* According to TI this can't be calculated so make the + * adjustments for a couple of known frequencies and warn for + * others. + */ + static const struct { + unsigned long l4_clk; /* HZ */ + unsigned long dss1_clk; /* HZ */ + unsigned long min_l4_ticks; + } ftab[] = { + { 55, 132, 7, }, /* 7.86 MPix/s */ + { 110, 110, 12, }, /* 9.16 MPix/s */ + { 110, 132, 10, }, /* 11 Mpix/s */ + { 120, 120, 10, }, /* 12 Mpix/s */ + { 133, 133, 10, }, /* 13.3 Mpix/s */ + }; + + l4_rate = rfbi.l4_khz / 1000; + dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; + + for (i = 0; i < ARRAY_SIZE(ftab); i++) { + /* Use a window instead of an exact match, to account + * for different DPLL multiplier / divider pairs. + */ + if (abs(ftab[i].l4_clk - l4_rate) < 3 && + abs(ftab[i].dss1_clk - dss1_rate) < 3) { + min_l4_ticks = ftab[i].min_l4_ticks; + break; + } + } + if (i == ARRAY_SIZE(ftab)) { + /* Can't be sure, return anyway the maximum not + * rate-limited. This might cause a problem only for the + * tearing synchronisation. + */ + DSSERR("can't determine maximum RFBI transfer rate\n"); + return rfbi.l4_khz * 1000; + } + return rfbi.l4_khz * 1000 / min_l4_ticks; +} +#else +int rfbi_get_max_tx_rate(void) +{ + return rfbi.l4_khz * 1000; +} +#endif + +static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) +{ + *clk_period = 1000000000 / rfbi.l4_khz; + *max_clk_div = 2; +} + +static int rfbi_convert_timings(struct rfbi_timings *t) +{ + u32 l; + int reon, reoff, weon, weoff, cson, csoff, cs_pulse; + int actim, recyc, wecyc; + int div = t->clk_div; + + if (div <= 0 || div > 2) + return -1; + + /* Make sure that after conversion it still holds that: + * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, + * csoff > cson, csoff >= max(weoff, reoff), actim > reon + */ + weon = ps_to_rfbi_ticks(t->we_on_time, div); + weoff = ps_to_rfbi_ticks(t->we_off_time, div); + if (weoff <= weon) + weoff = weon + 1; + if (weon > 0x0f) + return -1; + if (weoff > 0x3f) + return -1; + + reon = ps_to_rfbi_ticks(t->re_on_time, div); + reoff = ps_to_rfbi_ticks(t->re_off_time, div); + if (reoff <= reon) + reoff = reon + 1; + if (reon > 0x0f) + return -1; + if (reoff > 0x3f) + return -1; + + cson = ps_to_rfbi_ticks(t->cs_on_time, div); + csoff = ps_to_rfbi_ticks(t->cs_off_time, div); + if (csoff <= cson) + csoff = cson + 1; + if (csoff < max(weoff, reoff)) + csoff = max(weoff, reoff); + if (cson > 0x0f) + return -1; + if (csoff > 0x3f) + return -1; + + l = cson; + l |= csoff << 4; + l |= weon << 10; + l |= weoff << 14; + l |= reon << 20; + l |= reoff << 24; + + t->tim[0] = l; + + actim = ps_to_rfbi_ticks(t->access_time, div); + if (actim <= reon) + actim = reon + 1; + if (actim > 0x3f) + return -1; + + wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); + if (wecyc < weoff) + wecyc = weoff; + if (wecyc > 0x3f) + return -1; + + recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); + if (recyc < reoff) + recyc = reoff; + if (recyc > 0x3f) + return -1; + + cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); + if (cs_pulse > 0x3f) + return -1; + + l = wecyc; + l |= recyc << 6; + l |= cs_pulse << 12; + l |= actim << 22; + + t->tim[1] = l; + + t->tim[2] = div - 1; + + t->converted = 1; + + return 0; +} + +/* xxx FIX module selection missing */ +int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int extif_div) +{ + int hs, vs; + int min; + u32 l; + + hs = ps_to_rfbi_ticks(hs_pulse_time, 1); + vs = ps_to_rfbi_ticks(vs_pulse_time, 1); + if (hs < 2) + return -EDOM; + if (mode == OMAP_DSS_RFBI_TE_MODE_2) + min = 2; + else /* OMAP_DSS_RFBI_TE_MODE_1 */ + min = 4; + if (vs < min) + return -EDOM; + if (vs == hs) + return -EINVAL; + rfbi.te_mode = mode; + DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", + mode, hs, vs, hs_pol_inv, vs_pol_inv); + + rfbi_enable_clocks(1); + rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); + rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); + + l = rfbi_read_reg(RFBI_CONFIG(0)); + if (hs_pol_inv) + l &= ~(1 << 21); + else + l |= 1 << 21; + if (vs_pol_inv) + l &= ~(1 << 20); + else + l |= 1 << 20; + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(omap_rfbi_setup_te); + +/* xxx FIX module selection missing */ +int omap_rfbi_enable_te(bool enable, unsigned line) +{ + u32 l; + + DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); + if (line > (1 << 11) - 1) + return -EINVAL; + + rfbi_enable_clocks(1); + l = rfbi_read_reg(RFBI_CONFIG(0)); + l &= ~(0x3 << 2); + if (enable) { + rfbi.te_enabled = 1; + l |= rfbi.te_mode << 2; + } else + rfbi.te_enabled = 0; + rfbi_write_reg(RFBI_CONFIG(0), l); + rfbi_write_reg(RFBI_LINE_NUMBER, line); + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(omap_rfbi_enable_te); + +#if 0 +static void rfbi_enable_config(int enable1, int enable2) +{ + u32 l; + int cs = 0; + + if (enable1) + cs |= 1<<0; + if (enable2) + cs |= 1<<1; + + rfbi_enable_clocks(1); + + l = rfbi_read_reg(RFBI_CONTROL); + + l = FLD_MOD(l, cs, 3, 2); + l = FLD_MOD(l, 0, 1, 1); + + rfbi_write_reg(RFBI_CONTROL, l); + + + l = rfbi_read_reg(RFBI_CONFIG(0)); + l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ + /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ + /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ + + l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ + l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ + l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ + + l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); + rfbi_write_reg(RFBI_CONFIG(0), l); + + rfbi_enable_clocks(0); +} +#endif + +int rfbi_configure(int rfbi_module, int bpp, int lines) +{ + u32 l; + int cycle1 = 0, cycle2 = 0, cycle3 = 0; + enum omap_rfbi_cycleformat cycleformat; + enum omap_rfbi_datatype datatype; + enum omap_rfbi_parallelmode parallelmode; + + switch (bpp) { + case 12: + datatype = OMAP_DSS_RFBI_DATATYPE_12; + break; + case 16: + datatype = OMAP_DSS_RFBI_DATATYPE_16; + break; + case 18: + datatype = OMAP_DSS_RFBI_DATATYPE_18; + break; + case 24: + datatype = OMAP_DSS_RFBI_DATATYPE_24; + break; + default: + BUG(); + return 1; + } + rfbi.datatype = datatype; + + switch (lines) { + case 8: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; + break; + case 9: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; + break; + case 12: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; + break; + case 16: + parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; + break; + default: + BUG(); + return 1; + } + rfbi.parallelmode = parallelmode; + + if ((bpp % lines) == 0) { + switch (bpp / lines) { + case 1: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; + break; + case 2: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; + break; + case 3: + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; + break; + default: + BUG(); + return 1; + } + } else if ((2 * bpp % lines) == 0) { + if ((2 * bpp / lines) == 3) + cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; + else { + BUG(); + return 1; + } + } else { + BUG(); + return 1; + } + + switch (cycleformat) { + case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: + cycle1 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: + cycle1 = lines; + cycle2 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: + cycle1 = lines; + cycle2 = lines; + cycle3 = lines; + break; + + case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: + cycle1 = lines; + cycle2 = (lines / 2) | ((lines / 2) << 16); + cycle3 = (lines << 16); + break; + } + + rfbi_enable_clocks(1); + + REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ + + l = 0; + l |= FLD_VAL(parallelmode, 1, 0); + l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ + l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ + l |= FLD_VAL(datatype, 6, 5); + /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ + l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ + l |= FLD_VAL(cycleformat, 10, 9); + l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ + l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ + l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ + l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ + l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ + l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ + l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ + rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); + + rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); + rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); + rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); + + + l = rfbi_read_reg(RFBI_CONTROL); + l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ + l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ + rfbi_write_reg(RFBI_CONTROL, l); + + + DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", + bpp, lines, cycle1, cycle2, cycle3); + + rfbi_enable_clocks(0); + + return 0; +} +EXPORT_SYMBOL(rfbi_configure); + +static int rfbi_find_display(struct omap_dss_device *dssdev) +{ + if (dssdev == rfbi.dssdev[0]) + return 0; + + if (dssdev == rfbi.dssdev[1]) + return 1; + + BUG(); + return -1; +} + + +static void signal_fifo_waiters(void) +{ + if (atomic_read(&rfbi.cmd_fifo_full) > 0) { + /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ + complete(&rfbi.cmd_done); + atomic_dec(&rfbi.cmd_fifo_full); + } +} + +/* returns 1 for async op, and 0 for sync op */ +static int do_update(struct omap_dss_device *dssdev, struct update_region *upd) +{ + u16 x = upd->x; + u16 y = upd->y; + u16 w = upd->w; + u16 h = upd->h; + + perf_mark_setup(); + + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + /*dssdev->driver->enable_te(dssdev, 1); */ + dss_setup_partial_planes(dssdev, &x, &y, &w, &h); + } + +#ifdef MEASURE_PERF + rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ +#endif + + dssdev->driver->setup_update(dssdev, x, y, w, h); + + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + rfbi_transfer_area(w, h, NULL, NULL); + return 1; + } else { + struct omap_overlay *ovl; + void __iomem *addr; + int scr_width; + + ovl = dssdev->manager->overlays[0]; + scr_width = ovl->info.screen_width; + addr = ovl->info.vaddr; + + omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); + + perf_show("L4"); + + return 0; + } +} + +static void process_cmd_fifo(void) +{ + int len; + struct update_param p; + struct omap_dss_device *dssdev; + unsigned long flags; + + if (atomic_inc_return(&rfbi.cmd_pending) != 1) + return; + + while (true) { + spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + + len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, + sizeof(struct update_param)); + if (len == 0) { + DSSDBG("nothing more in fifo\n"); + atomic_set(&rfbi.cmd_pending, 0); + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + break; + } + + /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ + + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + + BUG_ON(len != sizeof(struct update_param)); + BUG_ON(p.rfbi_module > 1); + + dssdev = rfbi.dssdev[p.rfbi_module]; + + if (p.cmd == RFBI_CMD_UPDATE) { + if (do_update(dssdev, &p.par.r)) + break; /* async op */ + } else if (p.cmd == RFBI_CMD_SYNC) { + DSSDBG("Signaling SYNC done!\n"); + complete(p.par.sync); + } else + BUG(); + } + + signal_fifo_waiters(); +} + +static void rfbi_push_cmd(struct update_param *p) +{ + int ret; + + while (1) { + unsigned long flags; + int available; + + spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); + available = RFBI_CMD_FIFO_LEN_BYTES - + __kfifo_len(rfbi.cmd_fifo); + +/* DSSDBG("%d bytes left in fifo\n", available); */ + if (available < sizeof(struct update_param)) { + DSSDBG("Going to wait because FIFO FULL..\n"); + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + atomic_inc(&rfbi.cmd_fifo_full); + wait_for_completion(&rfbi.cmd_done); + /*DSSDBG("Woke up because fifo not full anymore\n");*/ + continue; + } + + ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, + sizeof(struct update_param)); +/* DSSDBG("pushed %d bytes\n", ret);*/ + + spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); + + BUG_ON(ret != sizeof(struct update_param)); + + break; + } +} + +static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) +{ + struct update_param p; + + p.rfbi_module = rfbi_module; + p.cmd = RFBI_CMD_UPDATE; + + p.par.r.x = x; + p.par.r.y = y; + p.par.r.w = w; + p.par.r.h = h; + + DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); + + rfbi_push_cmd(&p); + + process_cmd_fifo(); +} + +static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) +{ + struct update_param p; + + p.rfbi_module = rfbi_module; + p.cmd = RFBI_CMD_SYNC; + p.par.sync = sync_comp; + + rfbi_push_cmd(&p); + + DSSDBG("RFBI sync pushed to cmd fifo\n"); + + process_cmd_fifo(); +} + +void rfbi_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + DUMPREG(RFBI_REVISION); + DUMPREG(RFBI_SYSCONFIG); + DUMPREG(RFBI_SYSSTATUS); + DUMPREG(RFBI_CONTROL); + DUMPREG(RFBI_PIXEL_CNT); + DUMPREG(RFBI_LINE_NUMBER); + DUMPREG(RFBI_CMD); + DUMPREG(RFBI_PARAM); + DUMPREG(RFBI_DATA); + DUMPREG(RFBI_READ); + DUMPREG(RFBI_STATUS); + + DUMPREG(RFBI_CONFIG(0)); + DUMPREG(RFBI_ONOFF_TIME(0)); + DUMPREG(RFBI_CYCLE_TIME(0)); + DUMPREG(RFBI_DATA_CYCLE1(0)); + DUMPREG(RFBI_DATA_CYCLE2(0)); + DUMPREG(RFBI_DATA_CYCLE3(0)); + + DUMPREG(RFBI_CONFIG(1)); + DUMPREG(RFBI_ONOFF_TIME(1)); + DUMPREG(RFBI_CYCLE_TIME(1)); + DUMPREG(RFBI_DATA_CYCLE1(1)); + DUMPREG(RFBI_DATA_CYCLE2(1)); + DUMPREG(RFBI_DATA_CYCLE3(1)); + + DUMPREG(RFBI_VSYNC_WIDTH); + DUMPREG(RFBI_HSYNC_WIDTH); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +#undef DUMPREG +} + +int rfbi_init(void) +{ + u32 rev; + u32 l; + + spin_lock_init(&rfbi.cmd_lock); + rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, + &rfbi.cmd_lock); + if (IS_ERR(rfbi.cmd_fifo)) + return -ENOMEM; + + init_completion(&rfbi.cmd_done); + atomic_set(&rfbi.cmd_fifo_full, 0); + atomic_set(&rfbi.cmd_pending, 0); + + rfbi.base = ioremap(RFBI_BASE, SZ_256); + if (!rfbi.base) { + DSSERR("can't ioremap RFBI\n"); + return -ENOMEM; + } + + rfbi_enable_clocks(1); + + msleep(10); + + rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; + + /* Enable autoidle and smart-idle */ + l = rfbi_read_reg(RFBI_SYSCONFIG); + l |= (1 << 0) | (2 << 3); + rfbi_write_reg(RFBI_SYSCONFIG, l); + + rev = rfbi_read_reg(RFBI_REVISION); + printk(KERN_INFO "OMAP RFBI rev %d.%d\n", + FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); + + rfbi_enable_clocks(0); + + return 0; +} + +void rfbi_exit(void) +{ + DSSDBG("rfbi_exit\n"); + + kfifo_free(rfbi.cmd_fifo); + + iounmap(rfbi.base); +} + +/* struct omap_display support */ +static int rfbi_display_update(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h) +{ + int rfbi_module; + + if (w == 0 || h == 0) + return 0; + + rfbi_module = rfbi_find_display(dssdev); + + rfbi_push_update(rfbi_module, x, y, w, h); + + return 0; +} + +static int rfbi_display_sync(struct omap_dss_device *dssdev) +{ + struct completion sync_comp; + int rfbi_module; + + rfbi_module = rfbi_find_display(dssdev); + + init_completion(&sync_comp); + rfbi_push_sync(rfbi_module, &sync_comp); + DSSDBG("Waiting for SYNC to happen...\n"); + wait_for_completion(&sync_comp); + DSSDBG("Released from SYNC\n"); + return 0; +} + +static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable) +{ + dssdev->driver->enable_te(dssdev, enable); + return 0; +} + +static int rfbi_display_enable(struct omap_dss_device *dssdev) +{ + int r; + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + r = omap_dispc_register_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); + if (r) { + DSSERR("can't get FRAMEDONE irq\n"); + goto err1; + } + + dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); + + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); + + dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); + + rfbi_configure(dssdev->phy.rfbi.channel, + dssdev->ctrl.pixel_size, + dssdev->phy.rfbi.data_lines); + + rfbi_set_timings(dssdev->phy.rfbi.channel, + &dssdev->ctrl.rfbi_timings); + + + if (dssdev->driver->enable) { + r = dssdev->driver->enable(dssdev); + if (r) + goto err2; + } + + return 0; +err2: + omap_dispc_unregister_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); +err1: + omap_dss_stop_device(dssdev); +err0: + return r; +} + +static void rfbi_display_disable(struct omap_dss_device *dssdev) +{ + dssdev->driver->disable(dssdev); + omap_dispc_unregister_isr(framedone_callback, NULL, + DISPC_IRQ_FRAMEDONE); + omap_dss_stop_device(dssdev); +} + +int rfbi_init_display(struct omap_dss_device *dssdev) +{ + dssdev->enable = rfbi_display_enable; + dssdev->disable = rfbi_display_disable; + dssdev->update = rfbi_display_update; + dssdev->sync = rfbi_display_sync; + dssdev->enable_te = rfbi_display_enable_te; + + rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; + + dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; + + return 0; +} diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c new file mode 100644 index 00000000000..c24f307d3da --- /dev/null +++ b/drivers/video/omap2/dss/sdi.c @@ -0,0 +1,277 @@ +/* + * linux/drivers/video/omap2/dss/sdi.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "SDI" + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <plat/display.h> +#include "dss.h" + +static struct { + bool skip_init; + bool update_enabled; +} sdi; + +static void sdi_basic_init(void) +{ + dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); + + dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); + dispc_set_tft_data_lines(24); + dispc_lcd_enable_signal_polarity(1); +} + +static int sdi_display_enable(struct omap_dss_device *dssdev) +{ + struct omap_video_timings *t = &dssdev->panel.timings; + struct dss_clock_info dss_cinfo; + struct dispc_clock_info dispc_cinfo; + u16 lck_div, pck_div; + unsigned long fck; + unsigned long pck; + int r; + + r = omap_dss_start_device(dssdev); + if (r) { + DSSERR("failed to start device\n"); + goto err0; + } + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { + DSSERR("dssdev already enabled\n"); + r = -EINVAL; + goto err1; + } + + /* In case of skip_init sdi_init has already enabled the clocks */ + if (!sdi.skip_init) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + sdi_basic_init(); + + /* 15.5.9.1.2 */ + dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; + + dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, + dssdev->panel.acb); + + if (!sdi.skip_init) { + r = dss_calc_clock_div(1, t->pixel_clock * 1000, + &dss_cinfo, &dispc_cinfo); + } else { + r = dss_get_clock_div(&dss_cinfo); + r = dispc_get_clock_div(&dispc_cinfo); + } + + if (r) + goto err2; + + fck = dss_cinfo.fck; + lck_div = dispc_cinfo.lck_div; + pck_div = dispc_cinfo.pck_div; + + pck = fck / lck_div / pck_div / 1000; + + if (pck != t->pixel_clock) { + DSSWARN("Could not find exact pixel clock. Requested %d kHz, " + "got %lu kHz\n", + t->pixel_clock, pck); + + t->pixel_clock = pck; + } + + + dispc_set_lcd_timings(t); + + r = dss_set_clock_div(&dss_cinfo); + if (r) + goto err2; + + r = dispc_set_clock_div(&dispc_cinfo); + if (r) + goto err2; + + if (!sdi.skip_init) { + dss_sdi_init(dssdev->phy.sdi.datapairs); + r = dss_sdi_enable(); + if (r) + goto err1; + mdelay(2); + } + + dispc_enable_lcd_out(1); + + if (dssdev->driver->enable) { + r = dssdev->driver->enable(dssdev); + if (r) + goto err3; + } + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + sdi.skip_init = 0; + + return 0; +err3: + dispc_enable_lcd_out(0); +err2: + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); +err1: + omap_dss_stop_device(dssdev); +err0: + return r; +} + +static int sdi_display_resume(struct omap_dss_device *dssdev); + +static void sdi_display_disable(struct omap_dss_device *dssdev) +{ + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) + return; + + if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) + if (sdi_display_resume(dssdev)) + return; + + if (dssdev->driver->disable) + dssdev->driver->disable(dssdev); + + dispc_enable_lcd_out(0); + + dss_sdi_disable(); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + + omap_dss_stop_device(dssdev); +} + +static int sdi_display_suspend(struct omap_dss_device *dssdev) +{ + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return -EINVAL; + + if (dssdev->driver->suspend) + dssdev->driver->suspend(dssdev); + + dispc_enable_lcd_out(0); + + dss_sdi_disable(); + + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; + + return 0; +} + +static int sdi_display_resume(struct omap_dss_device *dssdev) +{ + int r; + + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) + return -EINVAL; + + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + + r = dss_sdi_enable(); + if (r) + goto err; + mdelay(2); + + dispc_enable_lcd_out(1); + + if (dssdev->driver->resume) + dssdev->driver->resume(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + return 0; +err: + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); + return r; +} + +static int sdi_display_set_update_mode(struct omap_dss_device *dssdev, + enum omap_dss_update_mode mode) +{ + if (mode == OMAP_DSS_UPDATE_MANUAL) + return -EINVAL; + + if (mode == OMAP_DSS_UPDATE_DISABLED) { + dispc_enable_lcd_out(0); + sdi.update_enabled = 0; + } else { + dispc_enable_lcd_out(1); + sdi.update_enabled = 1; + } + + return 0; +} + +static enum omap_dss_update_mode sdi_display_get_update_mode( + struct omap_dss_device *dssdev) +{ + return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : + OMAP_DSS_UPDATE_DISABLED; +} + +static void sdi_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + *timings = dssdev->panel.timings; +} + +int sdi_init_display(struct omap_dss_device *dssdev) +{ + DSSDBG("SDI init\n"); + + dssdev->enable = sdi_display_enable; + dssdev->disable = sdi_display_disable; + dssdev->suspend = sdi_display_suspend; + dssdev->resume = sdi_display_resume; + dssdev->set_update_mode = sdi_display_set_update_mode; + dssdev->get_update_mode = sdi_display_get_update_mode; + dssdev->get_timings = sdi_get_timings; + + return 0; +} + +int sdi_init(bool skip_init) +{ + /* we store this for first display enable, then clear it */ + sdi.skip_init = skip_init; + + /* + * Enable clocks already here, otherwise there would be a toggle + * of them until sdi_display_enable is called. + */ + if (skip_init) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); + return 0; +} + +void sdi_exit(void) +{ +} diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c new file mode 100644 index 00000000000..749a5a0f5be --- /dev/null +++ b/drivers/video/omap2/dss/venc.c @@ -0,0 +1,797 @@ +/* + * linux/drivers/video/omap2/dss/venc.c + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * VENC settings from TI's DSS driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define DSS_SUBSYS_NAME "VENC" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/seq_file.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#include <plat/display.h> +#include <plat/cpu.h> + +#include "dss.h" + +#define VENC_BASE 0x48050C00 + +/* Venc registers */ +#define VENC_REV_ID 0x00 +#define VENC_STATUS 0x04 +#define VENC_F_CONTROL 0x08 +#define VENC_VIDOUT_CTRL 0x10 +#define VENC_SYNC_CTRL 0x14 +#define VENC_LLEN 0x1C +#define VENC_FLENS 0x20 +#define VENC_HFLTR_CTRL 0x24 +#define VENC_CC_CARR_WSS_CARR 0x28 +#define VENC_C_PHASE 0x2C +#define VENC_GAIN_U 0x30 +#define VENC_GAIN_V 0x34 +#define VENC_GAIN_Y 0x38 +#define VENC_BLACK_LEVEL 0x3C +#define VENC_BLANK_LEVEL 0x40 +#define VENC_X_COLOR 0x44 +#define VENC_M_CONTROL 0x48 +#define VENC_BSTAMP_WSS_DATA 0x4C +#define VENC_S_CARR 0x50 +#define VENC_LINE21 0x54 +#define VENC_LN_SEL 0x58 +#define VENC_L21__WC_CTL 0x5C +#define VENC_HTRIGGER_VTRIGGER 0x60 +#define VENC_SAVID__EAVID 0x64 +#define VENC_FLEN__FAL 0x68 +#define VENC_LAL__PHASE_RESET 0x6C +#define VENC_HS_INT_START_STOP_X 0x70 +#define VENC_HS_EXT_START_STOP_X 0x74 +#define VENC_VS_INT_START_X 0x78 +#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C +#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 +#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 +#define VENC_VS_EXT_STOP_Y 0x88 +#define VENC_AVID_START_STOP_X 0x90 +#define VENC_AVID_START_STOP_Y 0x94 +#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 +#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 +#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 +#define VENC_TVDETGP_INT_START_STOP_X 0xB0 +#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 +#define VENC_GEN_CTRL 0xB8 +#define VENC_OUTPUT_CONTROL 0xC4 +#define VENC_OUTPUT_TEST 0xC8 +#define VENC_DAC_B__DAC_C 0xC8 + +struct venc_config { + u32 f_control; + u32 vidout_ctrl; + u32 sync_ctrl; + u32 llen; + u32 flens; + u32 hfltr_ctrl; + u32 cc_carr_wss_carr; + u32 c_phase; + u32 gain_u; + u32 gain_v; + u32 gain_y; + u32 black_level; + u32 blank_level; + u32 x_color; + u32 m_control; + u32 bstamp_wss_data; + u32 s_carr; + u32 line21; + u32 ln_sel; + u32 l21__wc_ctl; + u32 htrigger_vtrigger; + u32 savid__eavid; + u32 flen__fal; + u32 lal__phase_reset; + u32 hs_int_start_stop_x; + u32 hs_ext_start_stop_x; + u32 vs_int_start_x; + u32 vs_int_stop_x__vs_int_start_y; + u32 vs_int_stop_y__vs_ext_start_x; + u32 vs_ext_stop_x__vs_ext_start_y; + u32 vs_ext_stop_y; + u32 avid_start_stop_x; + u32 avid_start_stop_y; + u32 fid_int_start_x__fid_int_start_y; + u32 fid_int_offset_y__fid_ext_start_x; + u32 fid_ext_start_y__fid_ext_offset_y; + u32 tvdetgp_int_start_stop_x; + u32 tvdetgp_int_start_stop_y; + u32 gen_ctrl; +}; + +/* from TRM */ +static const struct venc_config venc_config_pal_trm = { + .f_control = 0, + .vidout_ctrl = 1, + .sync_ctrl = 0x40, + .llen = 0x35F, /* 863 */ + .flens = 0x270, /* 624 */ + .hfltr_ctrl = 0, + .cc_carr_wss_carr = 0x2F7225ED, + .c_phase = 0, + .gain_u = 0x111, + .gain_v = 0x181, + .gain_y = 0x140, + .black_level = 0x3B, + .blank_level = 0x3B, + .x_color = 0x7, + .m_control = 0x2, + .bstamp_wss_data = 0x3F, + .s_carr = 0x2A098ACB, + .line21 = 0, + .ln_sel = 0x01290015, + .l21__wc_ctl = 0x0000F603, + .htrigger_vtrigger = 0, + + .savid__eavid = 0x06A70108, + .flen__fal = 0x00180270, + .lal__phase_reset = 0x00040135, + .hs_int_start_stop_x = 0x00880358, + .hs_ext_start_stop_x = 0x000F035F, + .vs_int_start_x = 0x01A70000, + .vs_int_stop_x__vs_int_start_y = 0x000001A7, + .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, + .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, + .vs_ext_stop_y = 0x00000025, + .avid_start_stop_x = 0x03530083, + .avid_start_stop_y = 0x026C002E, + .fid_int_start_x__fid_int_start_y = 0x0001008A, + .fid_int_offset_y__fid_ext_start_x = 0x002E0138, + .fid_ext_start_y__fid_ext_offset_y = 0x01380001, + + .tvdetgp_int_start_stop_x = 0x00140001, + .tvdetgp_int_start_stop_y = 0x00010001, + .gen_ctrl = 0x00FF0000, +}; + +/* from TRM */ +static const struct venc_config venc_config_ntsc_trm = { + .f_control = 0, + .vidout_ctrl = 1, + .sync_ctrl = 0x8040, + .llen = 0x359, + .flens = 0x20C, + .hfltr_ctrl = 0, + .cc_carr_wss_carr = 0x043F2631, + .c_phase = 0, + .gain_u = 0x102, + .gain_v = 0x16C, + .gain_y = 0x12F, + .black_level = 0x43, + .blank_level = 0x38, + .x_color = 0x7, + .m_control = 0x1, + .bstamp_wss_data = 0x38, + .s_carr = 0x21F07C1F, + .line21 = 0, + .ln_sel = 0x01310011, + .l21__wc_ctl = 0x0000F003, + .htrigger_vtrigger = 0, + + .savid__eavid = 0x069300F4, + .flen__fal = 0x0016020C, + .lal__phase_reset = 0x00060107, + .hs_int_start_stop_x = 0x008E0350, + .hs_ext_start_stop_x = 0x000F0359, + .vs_int_start_x = 0x01A00000, + .vs_int_stop_x__vs_int_start_y = 0x020701A0, + .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, + .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, + .vs_ext_stop_y = 0x00000006, + .avid_start_stop_x = 0x03480078, + .avid_start_stop_y = 0x02060024, + .fid_int_start_x__fid_int_start_y = 0x0001008A, + .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, + .fid_ext_start_y__fid_ext_offset_y = 0x01060006, + + .tvdetgp_int_start_stop_x = 0x00140001, + .tvdetgp_int_start_stop_y = 0x00010001, + .gen_ctrl = 0x00F90000, +}; + +static const struct venc_config venc_config_pal_bdghi = { + .f_control = 0, + .vidout_ctrl = 0, + .sync_ctrl = 0, + .hfltr_ctrl = 0, + .x_color = 0, + .line21 = 0, + .ln_sel = 21, + .htrigger_vtrigger = 0, + .tvdetgp_int_start_stop_x = 0x00140001, + .tvdetgp_int_start_stop_y = 0x00010001, + .gen_ctrl = 0x00FB0000, + + .llen = 864-1, + .flens = 625-1, + .cc_carr_wss_carr = 0x2F7625ED, + .c_phase = 0xDF, + .gain_u = 0x111, + .gain_v = 0x181, + .gain_y = 0x140, + .black_level = 0x3e, + .blank_level = 0x3e, + .m_control = 0<<2 | 1<<1, + .bstamp_wss_data = 0x42, + .s_carr = 0x2a098acb, + .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, + .savid__eavid = 0x06A70108, + .flen__fal = 23<<16 | 624<<0, + .lal__phase_reset = 2<<17 | 310<<0, + .hs_int_start_stop_x = 0x00920358, + .hs_ext_start_stop_x = 0x000F035F, + .vs_int_start_x = 0x1a7<<16, + .vs_int_stop_x__vs_int_start_y = 0x000601A7, + .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, + .vs_ext_stop_x__vs_ext_start_y = 0x27101af, + .vs_ext_stop_y = 0x05, + .avid_start_stop_x = 0x03530082, + .avid_start_stop_y = 0x0270002E, + .fid_int_start_x__fid_int_start_y = 0x0005008A, + .fid_int_offset_y__fid_ext_start_x = 0x002E0138, + .fid_ext_start_y__fid_ext_offset_y = 0x01380005, +}; + +const struct omap_video_timings omap_dss_pal_timings = { + .x_res = 720, + .y_res = 574, + .pixel_clock = 13500, + .hsw = 64, + .hfp = 12, + .hbp = 68, + .vsw = 5, + .vfp = 5, + .vbp = 41, +}; +EXPORT_SYMBOL(omap_dss_pal_timings); + +const struct omap_video_timings omap_dss_ntsc_timings = { + .x_res = 720, + .y_res = 482, + .pixel_clock = 13500, + .hsw = 64, + .hfp = 16, + .hbp = 58, + .vsw = 6, + .vfp = 6, + .vbp = 31, +}; +EXPORT_SYMBOL(omap_dss_ntsc_timings); + +static struct { + void __iomem *base; + struct mutex venc_lock; + u32 wss_data; + struct regulator *vdda_dac_reg; +} venc; + +static inline void venc_write_reg(int idx, u32 val) +{ + __raw_writel(val, venc.base + idx); +} + +static inline u32 venc_read_reg(int idx) +{ + u32 l = __raw_readl(venc.base + idx); + return l; +} + +static void venc_write_config(const struct venc_config *config) +{ + DSSDBG("write venc conf\n"); + + venc_write_reg(VENC_LLEN, config->llen); + venc_write_reg(VENC_FLENS, config->flens); + venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); + venc_write_reg(VENC_C_PHASE, config->c_phase); + venc_write_reg(VENC_GAIN_U, config->gain_u); + venc_write_reg(VENC_GAIN_V, config->gain_v); + venc_write_reg(VENC_GAIN_Y, config->gain_y); + venc_write_reg(VENC_BLACK_LEVEL, config->black_level); + venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); + venc_write_reg(VENC_M_CONTROL, config->m_control); + venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | + venc.wss_data); + venc_write_reg(VENC_S_CARR, config->s_carr); + venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); + venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); + venc_write_reg(VENC_FLEN__FAL, config->flen__fal); + venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); + venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); + venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); + venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); + venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, + config->vs_int_stop_x__vs_int_start_y); + venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, + config->vs_int_stop_y__vs_ext_start_x); + venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, + config->vs_ext_stop_x__vs_ext_start_y); + venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); + venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); + venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); + venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, + config->fid_int_start_x__fid_int_start_y); + venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, + config->fid_int_offset_y__fid_ext_start_x); + venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, + config->fid_ext_start_y__fid_ext_offset_y); + + venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); + venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); + venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); + venc_write_reg(VENC_X_COLOR, config->x_color); + venc_write_reg(VENC_LINE21, config->line21); + venc_write_reg(VENC_LN_SEL, config->ln_sel); + venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); + venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, + config->tvdetgp_int_start_stop_x); + venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, + config->tvdetgp_int_start_stop_y); + venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); + venc_write_reg(VENC_F_CONTROL, config->f_control); + venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); +} + +static void venc_reset(void) +{ + int t = 1000; + + venc_write_reg(VENC_F_CONTROL, 1<<8); + while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { + if (--t == 0) { + DSSERR("Failed to reset venc\n"); + return; + } + } + + /* the magical sleep that makes things work */ + msleep(20); +} + +static void venc_enable_clocks(int enable) +{ + if (enable) + dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | + DSS_CLK_96M); + else + dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | + DSS_CLK_96M); +} + +static const struct venc_config *venc_timings_to_config( + struct omap_video_timings *timings) +{ + if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) + return &venc_config_pal_trm; + + if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) + return &venc_config_ntsc_trm; + + BUG(); +} + + + + + +/* driver */ +static int venc_panel_probe(struct omap_dss_device *dssdev) +{ + dssdev->panel.timings = omap_dss_pal_timings; + + return 0; +} + +static void venc_panel_remove(struct omap_dss_device *dssdev) +{ +} + +static int venc_panel_enable(struct omap_dss_device *dssdev) +{ + int r = 0; + + /* wait couple of vsyncs until enabling the LCD */ + msleep(50); + + if (dssdev->platform_enable) + r = dssdev->platform_enable(dssdev); + + return r; +} + +static void venc_panel_disable(struct omap_dss_device *dssdev) +{ + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + /* wait at least 5 vsyncs after disabling the LCD */ + + msleep(100); +} + +static int venc_panel_suspend(struct omap_dss_device *dssdev) +{ + venc_panel_disable(dssdev); + return 0; +} + +static int venc_panel_resume(struct omap_dss_device *dssdev) +{ + return venc_panel_enable(dssdev); +} + +static struct omap_dss_driver venc_driver = { + .probe = venc_panel_probe, + .remove = venc_panel_remove, + + .enable = venc_panel_enable, + .disable = venc_panel_disable, + .suspend = venc_panel_suspend, + .resume = venc_panel_resume, + + .driver = { + .name = "venc", + .owner = THIS_MODULE, + }, +}; +/* driver end */ + + + +int venc_init(struct platform_device *pdev) +{ + u8 rev_id; + + mutex_init(&venc.venc_lock); + + venc.wss_data = 0; + + venc.base = ioremap(VENC_BASE, SZ_1K); + if (!venc.base) { + DSSERR("can't ioremap VENC\n"); + return -ENOMEM; + } + + venc.vdda_dac_reg = regulator_get(&pdev->dev, "vdda_dac"); + if (IS_ERR(venc.vdda_dac_reg)) { + iounmap(venc.base); + DSSERR("can't get VDDA_DAC regulator\n"); + return PTR_ERR(venc.vdda_dac_reg); + } + + venc_enable_clocks(1); + + rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); + printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); + + venc_enable_clocks(0); + + return omap_dss_register_driver(&venc_driver); +} + +void venc_exit(void) +{ + omap_dss_unregister_driver(&venc_driver); + + regulator_put(venc.vdda_dac_reg); + + iounmap(venc.base); +} + +static void venc_power_on(struct omap_dss_device *dssdev) +{ + u32 l; + + venc_enable_clocks(1); + + venc_reset(); + venc_write_config(venc_timings_to_config(&dssdev->panel.timings)); + + dss_set_venc_output(dssdev->phy.venc.type); + dss_set_dac_pwrdn_bgz(1); + + l = 0; + + if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) + l |= 1 << 1; + else /* S-Video */ + l |= (1 << 0) | (1 << 2); + + if (dssdev->phy.venc.invert_polarity == false) + l |= 1 << 3; + + venc_write_reg(VENC_OUTPUT_CONTROL, l); + + dispc_set_digit_size(dssdev->panel.timings.x_res, + dssdev->panel.timings.y_res/2); + + regulator_enable(venc.vdda_dac_reg); + + if (dssdev->platform_enable) + dssdev->platform_enable(dssdev); + + dispc_enable_digit_out(1); +} + +static void venc_power_off(struct omap_dss_device *dssdev) +{ + venc_write_reg(VENC_OUTPUT_CONTROL, 0); + dss_set_dac_pwrdn_bgz(0); + + dispc_enable_digit_out(0); + + if (dssdev->platform_disable) + dssdev->platform_disable(dssdev); + + regulator_disable(venc.vdda_dac_reg); + + venc_enable_clocks(0); +} + +static int venc_enable_display(struct omap_dss_device *dssdev) +{ + int r = 0; + + DSSDBG("venc_enable_display\n"); + + mutex_lock(&venc.venc_lock); + + if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { + r = -EINVAL; + goto err; + } + + venc_power_on(dssdev); + + venc.wss_data = 0; + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; +err: + mutex_unlock(&venc.venc_lock); + + return r; +} + +static void venc_disable_display(struct omap_dss_device *dssdev) +{ + DSSDBG("venc_disable_display\n"); + + mutex_lock(&venc.venc_lock); + + if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED) + goto end; + + if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) { + /* suspended is the same as disabled with venc */ + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + goto end; + } + + venc_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; +end: + mutex_unlock(&venc.venc_lock); +} + +static int venc_display_suspend(struct omap_dss_device *dssdev) +{ + int r = 0; + + DSSDBG("venc_display_suspend\n"); + + mutex_lock(&venc.venc_lock); + + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { + r = -EINVAL; + goto err; + } + + venc_power_off(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; +err: + mutex_unlock(&venc.venc_lock); + + return r; +} + +static int venc_display_resume(struct omap_dss_device *dssdev) +{ + int r = 0; + + DSSDBG("venc_display_resume\n"); + + mutex_lock(&venc.venc_lock); + + if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { + r = -EINVAL; + goto err; + } + + venc_power_on(dssdev); + + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; +err: + mutex_unlock(&venc.venc_lock); + + return r; +} + +static void venc_get_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + *timings = dssdev->panel.timings; +} + +static void venc_set_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + DSSDBG("venc_set_timings\n"); + + /* Reset WSS data when the TV standard changes. */ + if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings))) + venc.wss_data = 0; + + dssdev->panel.timings = *timings; + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { + /* turn the venc off and on to get new timings to use */ + venc_disable_display(dssdev); + venc_enable_display(dssdev); + } +} + +static int venc_check_timings(struct omap_dss_device *dssdev, + struct omap_video_timings *timings) +{ + DSSDBG("venc_check_timings\n"); + + if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) + return 0; + + if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) + return 0; + + return -EINVAL; +} + +static u32 venc_get_wss(struct omap_dss_device *dssdev) +{ + /* Invert due to VENC_L21_WC_CTL:INV=1 */ + return (venc.wss_data >> 8) ^ 0xfffff; +} + +static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss) +{ + const struct venc_config *config; + + DSSDBG("venc_set_wss\n"); + + mutex_lock(&venc.venc_lock); + + config = venc_timings_to_config(&dssdev->panel.timings); + + /* Invert due to VENC_L21_WC_CTL:INV=1 */ + venc.wss_data = (wss ^ 0xfffff) << 8; + + venc_enable_clocks(1); + + venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data | + venc.wss_data); + + venc_enable_clocks(0); + + mutex_unlock(&venc.venc_lock); + + return 0; +} + +static enum omap_dss_update_mode venc_display_get_update_mode( + struct omap_dss_device *dssdev) +{ + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) + return OMAP_DSS_UPDATE_AUTO; + else + return OMAP_DSS_UPDATE_DISABLED; +} + +int venc_init_display(struct omap_dss_device *dssdev) +{ + DSSDBG("init_display\n"); + + dssdev->enable = venc_enable_display; + dssdev->disable = venc_disable_display; + dssdev->suspend = venc_display_suspend; + dssdev->resume = venc_display_resume; + dssdev->get_timings = venc_get_timings; + dssdev->set_timings = venc_set_timings; + dssdev->check_timings = venc_check_timings; + dssdev->get_wss = venc_get_wss; + dssdev->set_wss = venc_set_wss; + dssdev->get_update_mode = venc_display_get_update_mode; + + return 0; +} + +void venc_dump_regs(struct seq_file *s) +{ +#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r)) + + venc_enable_clocks(1); + + DUMPREG(VENC_F_CONTROL); + DUMPREG(VENC_VIDOUT_CTRL); + DUMPREG(VENC_SYNC_CTRL); + DUMPREG(VENC_LLEN); + DUMPREG(VENC_FLENS); + DUMPREG(VENC_HFLTR_CTRL); + DUMPREG(VENC_CC_CARR_WSS_CARR); + DUMPREG(VENC_C_PHASE); + DUMPREG(VENC_GAIN_U); + DUMPREG(VENC_GAIN_V); + DUMPREG(VENC_GAIN_Y); + DUMPREG(VENC_BLACK_LEVEL); + DUMPREG(VENC_BLANK_LEVEL); + DUMPREG(VENC_X_COLOR); + DUMPREG(VENC_M_CONTROL); + DUMPREG(VENC_BSTAMP_WSS_DATA); + DUMPREG(VENC_S_CARR); + DUMPREG(VENC_LINE21); + DUMPREG(VENC_LN_SEL); + DUMPREG(VENC_L21__WC_CTL); + DUMPREG(VENC_HTRIGGER_VTRIGGER); + DUMPREG(VENC_SAVID__EAVID); + DUMPREG(VENC_FLEN__FAL); + DUMPREG(VENC_LAL__PHASE_RESET); + DUMPREG(VENC_HS_INT_START_STOP_X); + DUMPREG(VENC_HS_EXT_START_STOP_X); + DUMPREG(VENC_VS_INT_START_X); + DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y); + DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X); + DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y); + DUMPREG(VENC_VS_EXT_STOP_Y); + DUMPREG(VENC_AVID_START_STOP_X); + DUMPREG(VENC_AVID_START_STOP_Y); + DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y); + DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X); + DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y); + DUMPREG(VENC_TVDETGP_INT_START_STOP_X); + DUMPREG(VENC_TVDETGP_INT_START_STOP_Y); + DUMPREG(VENC_GEN_CTRL); + DUMPREG(VENC_OUTPUT_CONTROL); + DUMPREG(VENC_OUTPUT_TEST); + + venc_enable_clocks(0); + +#undef DUMPREG +} diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig new file mode 100644 index 00000000000..bb694cc52a5 --- /dev/null +++ b/drivers/video/omap2/omapfb/Kconfig @@ -0,0 +1,37 @@ +menuconfig FB_OMAP2 + tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" + depends on FB && OMAP2_DSS + + select OMAP2_VRAM + select OMAP2_VRFB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Frame buffer driver for OMAP2/3 based boards. + +config FB_OMAP2_DEBUG_SUPPORT + bool "Debug support for OMAP2/3 FB" + default y + depends on FB_OMAP2 + help + Support for debug output. You have to enable the actual printing + with debug module parameter. + +config FB_OMAP2_FORCE_AUTO_UPDATE + bool "Force main display to automatic update mode" + depends on FB_OMAP2 + help + Forces main display to automatic update mode (if possible), + and also enables tearsync (if possible). By default + displays that support manual update are started in manual + update mode. + +config FB_OMAP2_NUM_FBS + int "Number of framebuffers" + range 1 10 + default 3 + depends on FB_OMAP2 + help + Select the number of framebuffers created. OMAP2/3 has 3 overlays + so normally this would be 3. diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile new file mode 100644 index 00000000000..51c2e00d9bf --- /dev/null +++ b/drivers/video/omap2/omapfb/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_FB_OMAP2) += omapfb.o +omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c new file mode 100644 index 00000000000..4c4bafdfaa4 --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -0,0 +1,755 @@ +/* + * linux/drivers/video/omap2/omapfb-ioctl.c + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/fb.h> +#include <linux/device.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/mm.h> +#include <linux/omapfb.h> +#include <linux/vmalloc.h> + +#include <plat/display.h> +#include <plat/vrfb.h> +#include <plat/vram.h> + +#include "omapfb.h" + +static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_overlay *ovl; + struct omap_overlay_info info; + int r = 0; + + DBG("omapfb_setup_plane\n"); + + if (ofbi->num_overlays != 1) { + r = -EINVAL; + goto out; + } + + /* XXX uses only the first overlay */ + ovl = ofbi->overlays[0]; + + if (pi->enabled && !ofbi->region.size) { + /* + * This plane's memory was freed, can't enable it + * until it's reallocated. + */ + r = -EINVAL; + goto out; + } + + ovl->get_overlay_info(ovl, &info); + + info.pos_x = pi->pos_x; + info.pos_y = pi->pos_y; + info.out_width = pi->out_width; + info.out_height = pi->out_height; + info.enabled = pi->enabled; + + r = ovl->set_overlay_info(ovl, &info); + if (r) + goto out; + + if (ovl->manager) { + r = ovl->manager->apply(ovl->manager); + if (r) + goto out; + } + +out: + if (r) + dev_err(fbdev->dev, "setup_plane failed\n"); + return r; +} + +static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + + if (ofbi->num_overlays != 1) { + memset(pi, 0, sizeof(*pi)); + } else { + struct omap_overlay_info *ovli; + struct omap_overlay *ovl; + + ovl = ofbi->overlays[0]; + ovli = &ovl->info; + + pi->pos_x = ovli->pos_x; + pi->pos_y = ovli->pos_y; + pi->enabled = ovli->enabled; + pi->channel_out = 0; /* xxx */ + pi->mirror = 0; + pi->out_width = ovli->out_width; + pi->out_height = ovli->out_height; + } + + return 0; +} + +static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omapfb2_mem_region *rg; + int r, i; + size_t size; + + if (mi->type > OMAPFB_MEMTYPE_MAX) + return -EINVAL; + + size = PAGE_ALIGN(mi->size); + + rg = &ofbi->region; + + for (i = 0; i < ofbi->num_overlays; i++) { + if (ofbi->overlays[i]->info.enabled) + return -EBUSY; + } + + if (rg->size != size || rg->type != mi->type) { + r = omapfb_realloc_fbmem(fbi, size, mi->type); + if (r) { + dev_err(fbdev->dev, "realloc fbmem failed\n"); + return r; + } + } + + return 0; +} + +static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_mem_region *rg; + + rg = &ofbi->region; + memset(mi, 0, sizeof(*mi)); + + mi->size = rg->size; + mi->type = rg->type; + + return 0; +} + +static int omapfb_update_window_nolock(struct fb_info *fbi, + u32 x, u32 y, u32 w, u32 h) +{ + struct omap_dss_device *display = fb2display(fbi); + u16 dw, dh; + + if (!display) + return 0; + + if (w == 0 || h == 0) + return 0; + + display->get_resolution(display, &dw, &dh); + + if (x + w > dw || y + h > dh) + return -EINVAL; + + return display->update(display, x, y, w, h); +} + +/* This function is exported for SGX driver use */ +int omapfb_update_window(struct fb_info *fbi, + u32 x, u32 y, u32 w, u32 h) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + int r; + + omapfb_lock(fbdev); + lock_fb_info(fbi); + + r = omapfb_update_window_nolock(fbi, x, y, w, h); + + unlock_fb_info(fbi); + omapfb_unlock(fbdev); + + return r; +} +EXPORT_SYMBOL(omapfb_update_window); + +static int omapfb_set_update_mode(struct fb_info *fbi, + enum omapfb_update_mode mode) +{ + struct omap_dss_device *display = fb2display(fbi); + enum omap_dss_update_mode um; + int r; + + if (!display || !display->set_update_mode) + return -EINVAL; + + switch (mode) { + case OMAPFB_UPDATE_DISABLED: + um = OMAP_DSS_UPDATE_DISABLED; + break; + + case OMAPFB_AUTO_UPDATE: + um = OMAP_DSS_UPDATE_AUTO; + break; + + case OMAPFB_MANUAL_UPDATE: + um = OMAP_DSS_UPDATE_MANUAL; + break; + + default: + return -EINVAL; + } + + r = display->set_update_mode(display, um); + + return r; +} + +static int omapfb_get_update_mode(struct fb_info *fbi, + enum omapfb_update_mode *mode) +{ + struct omap_dss_device *display = fb2display(fbi); + enum omap_dss_update_mode m; + + if (!display || !display->get_update_mode) + return -EINVAL; + + m = display->get_update_mode(display); + + switch (m) { + case OMAP_DSS_UPDATE_DISABLED: + *mode = OMAPFB_UPDATE_DISABLED; + break; + case OMAP_DSS_UPDATE_AUTO: + *mode = OMAPFB_AUTO_UPDATE; + break; + case OMAP_DSS_UPDATE_MANUAL: + *mode = OMAPFB_MANUAL_UPDATE; + break; + default: + BUG(); + } + + return 0; +} + +/* XXX this color key handling is a hack... */ +static struct omapfb_color_key omapfb_color_keys[2]; + +static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, + struct omapfb_color_key *ck) +{ + struct omap_overlay_manager_info info; + enum omap_dss_trans_key_type kt; + int r; + + mgr->get_manager_info(mgr, &info); + + if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) { + info.trans_enabled = false; + omapfb_color_keys[mgr->id] = *ck; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + + return r; + } + + switch (ck->key_type) { + case OMAPFB_COLOR_KEY_GFX_DST: + kt = OMAP_DSS_COLOR_KEY_GFX_DST; + break; + case OMAPFB_COLOR_KEY_VID_SRC: + kt = OMAP_DSS_COLOR_KEY_VID_SRC; + break; + default: + return -EINVAL; + } + + info.default_color = ck->background; + info.trans_key = ck->trans_key; + info.trans_key_type = kt; + info.trans_enabled = true; + + omapfb_color_keys[mgr->id] = *ck; + + r = mgr->set_manager_info(mgr, &info); + if (r) + return r; + + r = mgr->apply(mgr); + + return r; +} + +static int omapfb_set_color_key(struct fb_info *fbi, + struct omapfb_color_key *ck) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + int r; + int i; + struct omap_overlay_manager *mgr = NULL; + + omapfb_lock(fbdev); + + for (i = 0; i < ofbi->num_overlays; i++) { + if (ofbi->overlays[i]->manager) { + mgr = ofbi->overlays[i]->manager; + break; + } + } + + if (!mgr) { + r = -EINVAL; + goto err; + } + + r = _omapfb_set_color_key(mgr, ck); +err: + omapfb_unlock(fbdev); + + return r; +} + +static int omapfb_get_color_key(struct fb_info *fbi, + struct omapfb_color_key *ck) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_overlay_manager *mgr = NULL; + int r = 0; + int i; + + omapfb_lock(fbdev); + + for (i = 0; i < ofbi->num_overlays; i++) { + if (ofbi->overlays[i]->manager) { + mgr = ofbi->overlays[i]->manager; + break; + } + } + + if (!mgr) { + r = -EINVAL; + goto err; + } + + *ck = omapfb_color_keys[mgr->id]; +err: + omapfb_unlock(fbdev); + + return r; +} + +static int omapfb_memory_read(struct fb_info *fbi, + struct omapfb_memory_read *mr) +{ + struct omap_dss_device *display = fb2display(fbi); + void *buf; + int r; + + if (!display || !display->memory_read) + return -ENOENT; + + if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size)) + return -EFAULT; + + if (mr->w * mr->h * 3 > mr->buffer_size) + return -EINVAL; + + buf = vmalloc(mr->buffer_size); + if (!buf) { + DBG("vmalloc failed\n"); + return -ENOMEM; + } + + r = display->memory_read(display, buf, mr->buffer_size, + mr->x, mr->y, mr->w, mr->h); + + if (r > 0) { + if (copy_to_user(mr->buffer, buf, mr->buffer_size)) + r = -EFAULT; + } + + vfree(buf); + + return r; +} + +static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev, + struct omapfb_ovl_colormode *mode) +{ + int ovl_idx = mode->overlay_idx; + int mode_idx = mode->mode_idx; + struct omap_overlay *ovl; + enum omap_color_mode supported_modes; + struct fb_var_screeninfo var; + int i; + + if (ovl_idx >= fbdev->num_overlays) + return -ENODEV; + ovl = fbdev->overlays[ovl_idx]; + supported_modes = ovl->supported_modes; + + mode_idx = mode->mode_idx; + + for (i = 0; i < sizeof(supported_modes) * 8; i++) { + if (!(supported_modes & (1 << i))) + continue; + /* + * It's possible that the FB doesn't support a mode + * that is supported by the overlay, so call the + * following here. + */ + if (dss_mode_to_fb_mode(1 << i, &var) < 0) + continue; + + mode_idx--; + if (mode_idx < 0) + break; + } + + if (i == sizeof(supported_modes) * 8) + return -ENOENT; + + mode->bits_per_pixel = var.bits_per_pixel; + mode->nonstd = var.nonstd; + mode->red = var.red; + mode->green = var.green; + mode->blue = var.blue; + mode->transp = var.transp; + + return 0; +} + +static int omapfb_wait_for_go(struct fb_info *fbi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + int r = 0; + int i; + + for (i = 0; i < ofbi->num_overlays; ++i) { + struct omap_overlay *ovl = ofbi->overlays[i]; + r = ovl->wait_for_go(ovl); + if (r) + break; + } + + return r; +} + +int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_dss_device *display = fb2display(fbi); + + union { + struct omapfb_update_window_old uwnd_o; + struct omapfb_update_window uwnd; + struct omapfb_plane_info plane_info; + struct omapfb_caps caps; + struct omapfb_mem_info mem_info; + struct omapfb_color_key color_key; + struct omapfb_ovl_colormode ovl_colormode; + enum omapfb_update_mode update_mode; + int test_num; + struct omapfb_memory_read memory_read; + struct omapfb_vram_info vram_info; + struct omapfb_tearsync_info tearsync_info; + } p; + + int r = 0; + + switch (cmd) { + case OMAPFB_SYNC_GFX: + DBG("ioctl SYNC_GFX\n"); + if (!display || !display->sync) { + /* DSS1 never returns an error here, so we neither */ + /*r = -EINVAL;*/ + break; + } + + r = display->sync(display); + break; + + case OMAPFB_UPDATE_WINDOW_OLD: + DBG("ioctl UPDATE_WINDOW_OLD\n"); + if (!display || !display->update) { + r = -EINVAL; + break; + } + + if (copy_from_user(&p.uwnd_o, + (void __user *)arg, + sizeof(p.uwnd_o))) { + r = -EFAULT; + break; + } + + r = omapfb_update_window_nolock(fbi, p.uwnd_o.x, p.uwnd_o.y, + p.uwnd_o.width, p.uwnd_o.height); + break; + + case OMAPFB_UPDATE_WINDOW: + DBG("ioctl UPDATE_WINDOW\n"); + if (!display || !display->update) { + r = -EINVAL; + break; + } + + if (copy_from_user(&p.uwnd, (void __user *)arg, + sizeof(p.uwnd))) { + r = -EFAULT; + break; + } + + r = omapfb_update_window_nolock(fbi, p.uwnd.x, p.uwnd.y, + p.uwnd.width, p.uwnd.height); + break; + + case OMAPFB_SETUP_PLANE: + DBG("ioctl SETUP_PLANE\n"); + if (copy_from_user(&p.plane_info, (void __user *)arg, + sizeof(p.plane_info))) + r = -EFAULT; + else + r = omapfb_setup_plane(fbi, &p.plane_info); + break; + + case OMAPFB_QUERY_PLANE: + DBG("ioctl QUERY_PLANE\n"); + r = omapfb_query_plane(fbi, &p.plane_info); + if (r < 0) + break; + if (copy_to_user((void __user *)arg, &p.plane_info, + sizeof(p.plane_info))) + r = -EFAULT; + break; + + case OMAPFB_SETUP_MEM: + DBG("ioctl SETUP_MEM\n"); + if (copy_from_user(&p.mem_info, (void __user *)arg, + sizeof(p.mem_info))) + r = -EFAULT; + else + r = omapfb_setup_mem(fbi, &p.mem_info); + break; + + case OMAPFB_QUERY_MEM: + DBG("ioctl QUERY_MEM\n"); + r = omapfb_query_mem(fbi, &p.mem_info); + if (r < 0) + break; + if (copy_to_user((void __user *)arg, &p.mem_info, + sizeof(p.mem_info))) + r = -EFAULT; + break; + + case OMAPFB_GET_CAPS: + DBG("ioctl GET_CAPS\n"); + if (!display) { + r = -EINVAL; + break; + } + + memset(&p.caps, 0, sizeof(p.caps)); + if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) + p.caps.ctrl |= OMAPFB_CAPS_MANUAL_UPDATE; + if (display->caps & OMAP_DSS_DISPLAY_CAP_TEAR_ELIM) + p.caps.ctrl |= OMAPFB_CAPS_TEARSYNC; + + if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) + r = -EFAULT; + break; + + case OMAPFB_GET_OVERLAY_COLORMODE: + DBG("ioctl GET_OVERLAY_COLORMODE\n"); + if (copy_from_user(&p.ovl_colormode, (void __user *)arg, + sizeof(p.ovl_colormode))) { + r = -EFAULT; + break; + } + r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode); + if (r < 0) + break; + if (copy_to_user((void __user *)arg, &p.ovl_colormode, + sizeof(p.ovl_colormode))) + r = -EFAULT; + break; + + case OMAPFB_SET_UPDATE_MODE: + DBG("ioctl SET_UPDATE_MODE\n"); + if (get_user(p.update_mode, (int __user *)arg)) + r = -EFAULT; + else + r = omapfb_set_update_mode(fbi, p.update_mode); + break; + + case OMAPFB_GET_UPDATE_MODE: + DBG("ioctl GET_UPDATE_MODE\n"); + r = omapfb_get_update_mode(fbi, &p.update_mode); + if (r) + break; + if (put_user(p.update_mode, + (enum omapfb_update_mode __user *)arg)) + r = -EFAULT; + break; + + case OMAPFB_SET_COLOR_KEY: + DBG("ioctl SET_COLOR_KEY\n"); + if (copy_from_user(&p.color_key, (void __user *)arg, + sizeof(p.color_key))) + r = -EFAULT; + else + r = omapfb_set_color_key(fbi, &p.color_key); + break; + + case OMAPFB_GET_COLOR_KEY: + DBG("ioctl GET_COLOR_KEY\n"); + r = omapfb_get_color_key(fbi, &p.color_key); + if (r) + break; + if (copy_to_user((void __user *)arg, &p.color_key, + sizeof(p.color_key))) + r = -EFAULT; + break; + + case OMAPFB_WAITFORVSYNC: + DBG("ioctl WAITFORVSYNC\n"); + if (!display) { + r = -EINVAL; + break; + } + + r = display->wait_vsync(display); + break; + + case OMAPFB_WAITFORGO: + DBG("ioctl WAITFORGO\n"); + if (!display) { + r = -EINVAL; + break; + } + + r = omapfb_wait_for_go(fbi); + break; + + /* LCD and CTRL tests do the same thing for backward + * compatibility */ + case OMAPFB_LCD_TEST: + DBG("ioctl LCD_TEST\n"); + if (get_user(p.test_num, (int __user *)arg)) { + r = -EFAULT; + break; + } + if (!display || !display->run_test) { + r = -EINVAL; + break; + } + + r = display->run_test(display, p.test_num); + + break; + + case OMAPFB_CTRL_TEST: + DBG("ioctl CTRL_TEST\n"); + if (get_user(p.test_num, (int __user *)arg)) { + r = -EFAULT; + break; + } + if (!display || !display->run_test) { + r = -EINVAL; + break; + } + + r = display->run_test(display, p.test_num); + + break; + + case OMAPFB_MEMORY_READ: + DBG("ioctl MEMORY_READ\n"); + + if (copy_from_user(&p.memory_read, (void __user *)arg, + sizeof(p.memory_read))) { + r = -EFAULT; + break; + } + + r = omapfb_memory_read(fbi, &p.memory_read); + + break; + + case OMAPFB_GET_VRAM_INFO: { + unsigned long vram, free, largest; + + DBG("ioctl GET_VRAM_INFO\n"); + + omap_vram_get_info(&vram, &free, &largest); + p.vram_info.total = vram; + p.vram_info.free = free; + p.vram_info.largest_free_block = largest; + + if (copy_to_user((void __user *)arg, &p.vram_info, + sizeof(p.vram_info))) + r = -EFAULT; + break; + } + + case OMAPFB_SET_TEARSYNC: { + DBG("ioctl SET_TEARSYNC\n"); + + if (copy_from_user(&p.tearsync_info, (void __user *)arg, + sizeof(p.tearsync_info))) { + r = -EFAULT; + break; + } + + if (!display->enable_te) { + r = -ENODEV; + break; + } + + r = display->enable_te(display, !!p.tearsync_info.enabled); + + break; + } + + default: + dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd); + r = -EINVAL; + } + + if (r < 0) + DBG("ioctl failed: %d\n", r); + + return r; +} + + diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c new file mode 100644 index 00000000000..ef299839858 --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -0,0 +1,2261 @@ +/* + * linux/drivers/video/omap2/omapfb-main.c + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/omapfb.h> + +#include <plat/display.h> +#include <plat/vram.h> +#include <plat/vrfb.h> + +#include "omapfb.h" + +#define MODULE_NAME "omapfb" + +#define OMAPFB_PLANE_XRES_MIN 8 +#define OMAPFB_PLANE_YRES_MIN 8 + +static char *def_mode; +static char *def_vram; +static int def_vrfb; +static int def_rotate; +static int def_mirror; + +#ifdef DEBUG +unsigned int omapfb_debug; +module_param_named(debug, omapfb_debug, bool, 0644); +static unsigned int omapfb_test_pattern; +module_param_named(test, omapfb_test_pattern, bool, 0644); +#endif + +static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi); + +#ifdef DEBUG +static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color) +{ + struct fb_var_screeninfo *var = &fbi->var; + struct fb_fix_screeninfo *fix = &fbi->fix; + void __iomem *addr = fbi->screen_base; + const unsigned bytespp = var->bits_per_pixel >> 3; + const unsigned line_len = fix->line_length / bytespp; + + int r = (color >> 16) & 0xff; + int g = (color >> 8) & 0xff; + int b = (color >> 0) & 0xff; + + if (var->bits_per_pixel == 16) { + u16 __iomem *p = (u16 __iomem *)addr; + p += y * line_len + x; + + r = r * 32 / 256; + g = g * 64 / 256; + b = b * 32 / 256; + + __raw_writew((r << 11) | (g << 5) | (b << 0), p); + } else if (var->bits_per_pixel == 24) { + u8 __iomem *p = (u8 __iomem *)addr; + p += (y * line_len + x) * 3; + + __raw_writeb(b, p + 0); + __raw_writeb(g, p + 1); + __raw_writeb(r, p + 2); + } else if (var->bits_per_pixel == 32) { + u32 __iomem *p = (u32 __iomem *)addr; + p += y * line_len + x; + __raw_writel(color, p); + } +} + +static void fill_fb(struct fb_info *fbi) +{ + struct fb_var_screeninfo *var = &fbi->var; + const short w = var->xres_virtual; + const short h = var->yres_virtual; + void __iomem *addr = fbi->screen_base; + int y, x; + + if (!addr) + return; + + DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length); + + for (y = 0; y < h; y++) { + for (x = 0; x < w; x++) { + if (x < 20 && y < 20) + draw_pixel(fbi, x, y, 0xffffff); + else if (x < 20 && (y > 20 && y < h - 20)) + draw_pixel(fbi, x, y, 0xff); + else if (y < 20 && (x > 20 && x < w - 20)) + draw_pixel(fbi, x, y, 0xff00); + else if (x > w - 20 && (y > 20 && y < h - 20)) + draw_pixel(fbi, x, y, 0xff0000); + else if (y > h - 20 && (x > 20 && x < w - 20)) + draw_pixel(fbi, x, y, 0xffff00); + else if (x == 20 || x == w - 20 || + y == 20 || y == h - 20) + draw_pixel(fbi, x, y, 0xffffff); + else if (x == y || w - x == h - y) + draw_pixel(fbi, x, y, 0xff00ff); + else if (w - x == y || x == h - y) + draw_pixel(fbi, x, y, 0x00ffff); + else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) { + int t = x * 3 / w; + unsigned r = 0, g = 0, b = 0; + unsigned c; + if (var->bits_per_pixel == 16) { + if (t == 0) + b = (y % 32) * 256 / 32; + else if (t == 1) + g = (y % 64) * 256 / 64; + else if (t == 2) + r = (y % 32) * 256 / 32; + } else { + if (t == 0) + b = (y % 256); + else if (t == 1) + g = (y % 256); + else if (t == 2) + r = (y % 256); + } + c = (r << 16) | (g << 8) | (b << 0); + draw_pixel(fbi, x, y, c); + } else { + draw_pixel(fbi, x, y, 0); + } + } + } +} +#endif + +static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot) +{ + struct vrfb *vrfb = &ofbi->region.vrfb; + unsigned offset; + + switch (rot) { + case FB_ROTATE_UR: + offset = 0; + break; + case FB_ROTATE_CW: + offset = vrfb->yoffset; + break; + case FB_ROTATE_UD: + offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset; + break; + case FB_ROTATE_CCW: + offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN; + break; + default: + BUG(); + } + + offset *= vrfb->bytespp; + + return offset; +} + +static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi, int rot) +{ + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + return ofbi->region.vrfb.paddr[rot] + + omapfb_get_vrfb_offset(ofbi, rot); + } else { + return ofbi->region.paddr; + } +} + +static u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) +{ + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + return ofbi->region.vrfb.paddr[0]; + else + return ofbi->region.paddr; +} + +static void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi) +{ + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + return ofbi->region.vrfb.vaddr[0]; + else + return ofbi->region.vaddr; +} + +static struct omapfb_colormode omapfb_colormodes[] = { + { + .dssmode = OMAP_DSS_COLOR_UYVY, + .bits_per_pixel = 16, + .nonstd = OMAPFB_COLOR_YUV422, + }, { + .dssmode = OMAP_DSS_COLOR_YUV2, + .bits_per_pixel = 16, + .nonstd = OMAPFB_COLOR_YUY422, + }, { + .dssmode = OMAP_DSS_COLOR_ARGB16, + .bits_per_pixel = 16, + .red = { .length = 4, .offset = 8, .msb_right = 0 }, + .green = { .length = 4, .offset = 4, .msb_right = 0 }, + .blue = { .length = 4, .offset = 0, .msb_right = 0 }, + .transp = { .length = 4, .offset = 12, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_RGB16, + .bits_per_pixel = 16, + .red = { .length = 5, .offset = 11, .msb_right = 0 }, + .green = { .length = 6, .offset = 5, .msb_right = 0 }, + .blue = { .length = 5, .offset = 0, .msb_right = 0 }, + .transp = { .length = 0, .offset = 0, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_RGB24P, + .bits_per_pixel = 24, + .red = { .length = 8, .offset = 16, .msb_right = 0 }, + .green = { .length = 8, .offset = 8, .msb_right = 0 }, + .blue = { .length = 8, .offset = 0, .msb_right = 0 }, + .transp = { .length = 0, .offset = 0, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_RGB24U, + .bits_per_pixel = 32, + .red = { .length = 8, .offset = 16, .msb_right = 0 }, + .green = { .length = 8, .offset = 8, .msb_right = 0 }, + .blue = { .length = 8, .offset = 0, .msb_right = 0 }, + .transp = { .length = 0, .offset = 0, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_ARGB32, + .bits_per_pixel = 32, + .red = { .length = 8, .offset = 16, .msb_right = 0 }, + .green = { .length = 8, .offset = 8, .msb_right = 0 }, + .blue = { .length = 8, .offset = 0, .msb_right = 0 }, + .transp = { .length = 8, .offset = 24, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_RGBA32, + .bits_per_pixel = 32, + .red = { .length = 8, .offset = 24, .msb_right = 0 }, + .green = { .length = 8, .offset = 16, .msb_right = 0 }, + .blue = { .length = 8, .offset = 8, .msb_right = 0 }, + .transp = { .length = 8, .offset = 0, .msb_right = 0 }, + }, { + .dssmode = OMAP_DSS_COLOR_RGBX32, + .bits_per_pixel = 32, + .red = { .length = 8, .offset = 24, .msb_right = 0 }, + .green = { .length = 8, .offset = 16, .msb_right = 0 }, + .blue = { .length = 8, .offset = 8, .msb_right = 0 }, + .transp = { .length = 0, .offset = 0, .msb_right = 0 }, + }, +}; + +static bool cmp_var_to_colormode(struct fb_var_screeninfo *var, + struct omapfb_colormode *color) +{ + bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2) + { + return f1->length == f2->length && + f1->offset == f2->offset && + f1->msb_right == f2->msb_right; + } + + if (var->bits_per_pixel == 0 || + var->red.length == 0 || + var->blue.length == 0 || + var->green.length == 0) + return 0; + + return var->bits_per_pixel == color->bits_per_pixel && + cmp_component(&var->red, &color->red) && + cmp_component(&var->green, &color->green) && + cmp_component(&var->blue, &color->blue) && + cmp_component(&var->transp, &color->transp); +} + +static void assign_colormode_to_var(struct fb_var_screeninfo *var, + struct omapfb_colormode *color) +{ + var->bits_per_pixel = color->bits_per_pixel; + var->nonstd = color->nonstd; + var->red = color->red; + var->green = color->green; + var->blue = color->blue; + var->transp = color->transp; +} + +static int fb_mode_to_dss_mode(struct fb_var_screeninfo *var, + enum omap_color_mode *mode) +{ + enum omap_color_mode dssmode; + int i; + + /* first match with nonstd field */ + if (var->nonstd) { + for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { + struct omapfb_colormode *m = &omapfb_colormodes[i]; + if (var->nonstd == m->nonstd) { + assign_colormode_to_var(var, m); + *mode = m->dssmode; + return 0; + } + } + + return -EINVAL; + } + + /* then try exact match of bpp and colors */ + for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { + struct omapfb_colormode *m = &omapfb_colormodes[i]; + if (cmp_var_to_colormode(var, m)) { + assign_colormode_to_var(var, m); + *mode = m->dssmode; + return 0; + } + } + + /* match with bpp if user has not filled color fields + * properly */ + switch (var->bits_per_pixel) { + case 1: + dssmode = OMAP_DSS_COLOR_CLUT1; + break; + case 2: + dssmode = OMAP_DSS_COLOR_CLUT2; + break; + case 4: + dssmode = OMAP_DSS_COLOR_CLUT4; + break; + case 8: + dssmode = OMAP_DSS_COLOR_CLUT8; + break; + case 12: + dssmode = OMAP_DSS_COLOR_RGB12U; + break; + case 16: + dssmode = OMAP_DSS_COLOR_RGB16; + break; + case 24: + dssmode = OMAP_DSS_COLOR_RGB24P; + break; + case 32: + dssmode = OMAP_DSS_COLOR_RGB24U; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { + struct omapfb_colormode *m = &omapfb_colormodes[i]; + if (dssmode == m->dssmode) { + assign_colormode_to_var(var, m); + *mode = m->dssmode; + return 0; + } + } + + return -EINVAL; +} + +static int check_fb_res_bounds(struct fb_var_screeninfo *var) +{ + int xres_min = OMAPFB_PLANE_XRES_MIN; + int xres_max = 2048; + int yres_min = OMAPFB_PLANE_YRES_MIN; + int yres_max = 2048; + + /* XXX: some applications seem to set virtual res to 0. */ + if (var->xres_virtual == 0) + var->xres_virtual = var->xres; + + if (var->yres_virtual == 0) + var->yres_virtual = var->yres; + + if (var->xres_virtual < xres_min || var->yres_virtual < yres_min) + return -EINVAL; + + if (var->xres < xres_min) + var->xres = xres_min; + if (var->yres < yres_min) + var->yres = yres_min; + if (var->xres > xres_max) + var->xres = xres_max; + if (var->yres > yres_max) + var->yres = yres_max; + + if (var->xres > var->xres_virtual) + var->xres = var->xres_virtual; + if (var->yres > var->yres_virtual) + var->yres = var->yres_virtual; + + return 0; +} + +static void shrink_height(unsigned long max_frame_size, + struct fb_var_screeninfo *var) +{ + DBG("can't fit FB into memory, reducing y\n"); + var->yres_virtual = max_frame_size / + (var->xres_virtual * var->bits_per_pixel >> 3); + + if (var->yres_virtual < OMAPFB_PLANE_YRES_MIN) + var->yres_virtual = OMAPFB_PLANE_YRES_MIN; + + if (var->yres > var->yres_virtual) + var->yres = var->yres_virtual; +} + +static void shrink_width(unsigned long max_frame_size, + struct fb_var_screeninfo *var) +{ + DBG("can't fit FB into memory, reducing x\n"); + var->xres_virtual = max_frame_size / var->yres_virtual / + (var->bits_per_pixel >> 3); + + if (var->xres_virtual < OMAPFB_PLANE_XRES_MIN) + var->xres_virtual = OMAPFB_PLANE_XRES_MIN; + + if (var->xres > var->xres_virtual) + var->xres = var->xres_virtual; +} + +static int check_vrfb_fb_size(unsigned long region_size, + const struct fb_var_screeninfo *var) +{ + unsigned long min_phys_size = omap_vrfb_min_phys_size(var->xres_virtual, + var->yres_virtual, var->bits_per_pixel >> 3); + + return min_phys_size > region_size ? -EINVAL : 0; +} + +static int check_fb_size(const struct omapfb_info *ofbi, + struct fb_var_screeninfo *var) +{ + unsigned long max_frame_size = ofbi->region.size; + int bytespp = var->bits_per_pixel >> 3; + unsigned long line_size = var->xres_virtual * bytespp; + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + /* One needs to check for both VRFB and OMAPFB limitations. */ + if (check_vrfb_fb_size(max_frame_size, var)) + shrink_height(omap_vrfb_max_height( + max_frame_size, var->xres_virtual, bytespp) * + line_size, var); + + if (check_vrfb_fb_size(max_frame_size, var)) { + DBG("cannot fit FB to memory\n"); + return -EINVAL; + } + + return 0; + } + + DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size); + + if (line_size * var->yres_virtual > max_frame_size) + shrink_height(max_frame_size, var); + + if (line_size * var->yres_virtual > max_frame_size) { + shrink_width(max_frame_size, var); + line_size = var->xres_virtual * bytespp; + } + + if (line_size * var->yres_virtual > max_frame_size) { + DBG("cannot fit FB to memory\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Consider if VRFB assisted rotation is in use and if the virtual space for + * the zero degree view needs to be mapped. The need for mapping also acts as + * the trigger for setting up the hardware on the context in question. This + * ensures that one does not attempt to access the virtual view before the + * hardware is serving the address translations. + */ +static int setup_vrfb_rotation(struct fb_info *fbi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_mem_region *rg = &ofbi->region; + struct vrfb *vrfb = &rg->vrfb; + struct fb_var_screeninfo *var = &fbi->var; + struct fb_fix_screeninfo *fix = &fbi->fix; + unsigned bytespp; + bool yuv_mode; + enum omap_color_mode mode; + int r; + bool reconf; + + if (!rg->size || ofbi->rotation_type != OMAP_DSS_ROT_VRFB) + return 0; + + DBG("setup_vrfb_rotation\n"); + + r = fb_mode_to_dss_mode(var, &mode); + if (r) + return r; + + bytespp = var->bits_per_pixel >> 3; + + yuv_mode = mode == OMAP_DSS_COLOR_YUV2 || mode == OMAP_DSS_COLOR_UYVY; + + /* We need to reconfigure VRFB if the resolution changes, if yuv mode + * is enabled/disabled, or if bytes per pixel changes */ + + /* XXX we shouldn't allow this when framebuffer is mmapped */ + + reconf = false; + + if (yuv_mode != vrfb->yuv_mode) + reconf = true; + else if (bytespp != vrfb->bytespp) + reconf = true; + else if (vrfb->xres != var->xres_virtual || + vrfb->yres != var->yres_virtual) + reconf = true; + + if (vrfb->vaddr[0] && reconf) { + fbi->screen_base = NULL; + fix->smem_start = 0; + fix->smem_len = 0; + iounmap(vrfb->vaddr[0]); + vrfb->vaddr[0] = NULL; + DBG("setup_vrfb_rotation: reset fb\n"); + } + + if (vrfb->vaddr[0]) + return 0; + + omap_vrfb_setup(&rg->vrfb, rg->paddr, + var->xres_virtual, + var->yres_virtual, + bytespp, yuv_mode); + + /* Now one can ioremap the 0 angle view */ + r = omap_vrfb_map_angle(vrfb, var->yres_virtual, 0); + if (r) + return r; + + /* used by open/write in fbmem.c */ + fbi->screen_base = ofbi->region.vrfb.vaddr[0]; + + fix->smem_start = ofbi->region.vrfb.paddr[0]; + + switch (var->nonstd) { + case OMAPFB_COLOR_YUV422: + case OMAPFB_COLOR_YUY422: + fix->line_length = + (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; + break; + default: + fix->line_length = + (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; + break; + } + + fix->smem_len = var->yres_virtual * fix->line_length; + + return 0; +} + +int dss_mode_to_fb_mode(enum omap_color_mode dssmode, + struct fb_var_screeninfo *var) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { + struct omapfb_colormode *mode = &omapfb_colormodes[i]; + if (dssmode == mode->dssmode) { + assign_colormode_to_var(var, mode); + return 0; + } + } + return -ENOENT; +} + +void set_fb_fix(struct fb_info *fbi) +{ + struct fb_fix_screeninfo *fix = &fbi->fix; + struct fb_var_screeninfo *var = &fbi->var; + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_mem_region *rg = &ofbi->region; + + DBG("set_fb_fix\n"); + + /* used by open/write in fbmem.c */ + fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); + + /* used by mmap in fbmem.c */ + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + switch (var->nonstd) { + case OMAPFB_COLOR_YUV422: + case OMAPFB_COLOR_YUY422: + fix->line_length = + (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; + break; + default: + fix->line_length = + (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; + break; + } + + fix->smem_len = var->yres_virtual * fix->line_length; + } else { + fix->line_length = + (var->xres_virtual * var->bits_per_pixel) >> 3; + fix->smem_len = rg->size; + } + + fix->smem_start = omapfb_get_region_paddr(ofbi); + + fix->type = FB_TYPE_PACKED_PIXELS; + + if (var->nonstd) + fix->visual = FB_VISUAL_PSEUDOCOLOR; + else { + switch (var->bits_per_pixel) { + case 32: + case 24: + case 16: + case 12: + fix->visual = FB_VISUAL_TRUECOLOR; + /* 12bpp is stored in 16 bits */ + break; + case 1: + case 2: + case 4: + case 8: + fix->visual = FB_VISUAL_PSEUDOCOLOR; + break; + } + } + + fix->accel = FB_ACCEL_NONE; + + fix->xpanstep = 1; + fix->ypanstep = 1; +} + +/* check new var and possibly modify it to be ok */ +int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omap_dss_device *display = fb2display(fbi); + enum omap_color_mode mode = 0; + int i; + int r; + + DBG("check_fb_var %d\n", ofbi->id); + + if (ofbi->region.size == 0) + return 0; + + r = fb_mode_to_dss_mode(var, &mode); + if (r) { + DBG("cannot convert var to omap dss mode\n"); + return r; + } + + for (i = 0; i < ofbi->num_overlays; ++i) { + if ((ofbi->overlays[i]->supported_modes & mode) == 0) { + DBG("invalid mode\n"); + return -EINVAL; + } + } + + if (var->rotate < 0 || var->rotate > 3) + return -EINVAL; + + if (check_fb_res_bounds(var)) + return -EINVAL; + + if (check_fb_size(ofbi, var)) + return -EINVAL; + + if (var->xres + var->xoffset > var->xres_virtual) + var->xoffset = var->xres_virtual - var->xres; + if (var->yres + var->yoffset > var->yres_virtual) + var->yoffset = var->yres_virtual - var->yres; + + DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", + var->xres, var->yres, + var->xres_virtual, var->yres_virtual); + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + if (display && display->get_timings) { + struct omap_video_timings timings; + display->get_timings(display, &timings); + + /* pixclock in ps, the rest in pixclock */ + var->pixclock = timings.pixel_clock != 0 ? + KHZ2PICOS(timings.pixel_clock) : + 0; + var->left_margin = timings.hfp; + var->right_margin = timings.hbp; + var->upper_margin = timings.vfp; + var->lower_margin = timings.vbp; + var->hsync_len = timings.hsw; + var->vsync_len = timings.vsw; + } else { + var->pixclock = 0; + var->left_margin = 0; + var->right_margin = 0; + var->upper_margin = 0; + var->lower_margin = 0; + var->hsync_len = 0; + var->vsync_len = 0; + } + + /* TODO: get these from panel->config */ + var->vmode = FB_VMODE_NONINTERLACED; + var->sync = 0; + + return 0; +} + +/* + * --------------------------------------------------------------------------- + * fbdev framework callbacks + * --------------------------------------------------------------------------- + */ +static int omapfb_open(struct fb_info *fbi, int user) +{ + return 0; +} + +static int omapfb_release(struct fb_info *fbi, int user) +{ +#if 0 + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_dss_device *display = fb2display(fbi); + + DBG("Closing fb with plane index %d\n", ofbi->id); + + omapfb_lock(fbdev); + + if (display && display->get_update_mode && display->update) { + /* XXX this update should be removed, I think. But it's + * good for debugging */ + if (display->get_update_mode(display) == + OMAP_DSS_UPDATE_MANUAL) { + u16 w, h; + + if (display->sync) + display->sync(display); + + display->get_resolution(display, &w, &h); + display->update(display, 0, 0, w, h); + } + } + + if (display && display->sync) + display->sync(display); + + omapfb_unlock(fbdev); +#endif + return 0; +} + +static unsigned calc_rotation_offset_dma(struct fb_var_screeninfo *var, + struct fb_fix_screeninfo *fix, int rotation) +{ + unsigned offset; + + offset = var->yoffset * fix->line_length + + var->xoffset * (var->bits_per_pixel >> 3); + + return offset; +} + +static unsigned calc_rotation_offset_vrfb(struct fb_var_screeninfo *var, + struct fb_fix_screeninfo *fix, int rotation) +{ + unsigned offset; + + if (rotation == FB_ROTATE_UD) + offset = (var->yres_virtual - var->yres) * + fix->line_length; + else if (rotation == FB_ROTATE_CW) + offset = (var->yres_virtual - var->yres) * + (var->bits_per_pixel >> 3); + else + offset = 0; + + if (rotation == FB_ROTATE_UR) + offset += var->yoffset * fix->line_length + + var->xoffset * (var->bits_per_pixel >> 3); + else if (rotation == FB_ROTATE_UD) + offset -= var->yoffset * fix->line_length + + var->xoffset * (var->bits_per_pixel >> 3); + else if (rotation == FB_ROTATE_CW) + offset -= var->xoffset * fix->line_length + + var->yoffset * (var->bits_per_pixel >> 3); + else if (rotation == FB_ROTATE_CCW) + offset += var->xoffset * fix->line_length + + var->yoffset * (var->bits_per_pixel >> 3); + + return offset; +} + + +/* setup overlay according to the fb */ +static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + u16 posx, u16 posy, u16 outw, u16 outh) +{ + int r = 0; + struct omapfb_info *ofbi = FB2OFB(fbi); + struct fb_var_screeninfo *var = &fbi->var; + struct fb_fix_screeninfo *fix = &fbi->fix; + enum omap_color_mode mode = 0; + int offset; + u32 data_start_p; + void __iomem *data_start_v; + struct omap_overlay_info info; + int xres, yres; + int screen_width; + int mirror; + int rotation = var->rotate; + int i; + + for (i = 0; i < ofbi->num_overlays; i++) { + if (ovl != ofbi->overlays[i]) + continue; + + rotation = (rotation + ofbi->rotation[i]) % 4; + break; + } + + DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, + posx, posy, outw, outh); + + if (rotation == FB_ROTATE_CW || rotation == FB_ROTATE_CCW) { + xres = var->yres; + yres = var->xres; + } else { + xres = var->xres; + yres = var->yres; + } + + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); + data_start_v = NULL; + } else { + data_start_p = omapfb_get_region_paddr(ofbi); + data_start_v = omapfb_get_region_vaddr(ofbi); + } + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + offset = calc_rotation_offset_vrfb(var, fix, rotation); + else + offset = calc_rotation_offset_dma(var, fix, rotation); + + data_start_p += offset; + data_start_v += offset; + + if (offset) + DBG("offset %d, %d = %d\n", + var->xoffset, var->yoffset, offset); + + DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v); + + r = fb_mode_to_dss_mode(var, &mode); + if (r) { + DBG("fb_mode_to_dss_mode failed"); + goto err; + } + + switch (var->nonstd) { + case OMAPFB_COLOR_YUV422: + case OMAPFB_COLOR_YUY422: + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + screen_width = fix->line_length + / (var->bits_per_pixel >> 2); + break; + } + default: + screen_width = fix->line_length / (var->bits_per_pixel >> 3); + break; + } + + ovl->get_overlay_info(ovl, &info); + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + mirror = 0; + else + mirror = ofbi->mirror; + + info.paddr = data_start_p; + info.vaddr = data_start_v; + info.screen_width = screen_width; + info.width = xres; + info.height = yres; + info.color_mode = mode; + info.rotation_type = ofbi->rotation_type; + info.rotation = rotation; + info.mirror = mirror; + + info.pos_x = posx; + info.pos_y = posy; + info.out_width = outw; + info.out_height = outh; + + r = ovl->set_overlay_info(ovl, &info); + if (r) { + DBG("ovl->setup_overlay_info failed\n"); + goto err; + } + + return 0; + +err: + DBG("setup_overlay failed\n"); + return r; +} + +/* apply var to the overlay */ +int omapfb_apply_changes(struct fb_info *fbi, int init) +{ + int r = 0; + struct omapfb_info *ofbi = FB2OFB(fbi); + struct fb_var_screeninfo *var = &fbi->var; + struct omap_overlay *ovl; + u16 posx, posy; + u16 outw, outh; + int i; + +#ifdef DEBUG + if (omapfb_test_pattern) + fill_fb(fbi); +#endif + + for (i = 0; i < ofbi->num_overlays; i++) { + ovl = ofbi->overlays[i]; + + DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); + + if (ofbi->region.size == 0) { + /* the fb is not available. disable the overlay */ + omapfb_overlay_enable(ovl, 0); + if (!init && ovl->manager) + ovl->manager->apply(ovl->manager); + continue; + } + + if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { + int rotation = (var->rotate + ofbi->rotation[i]) % 4; + if (rotation == FB_ROTATE_CW || + rotation == FB_ROTATE_CCW) { + outw = var->yres; + outh = var->xres; + } else { + outw = var->xres; + outh = var->yres; + } + } else { + outw = ovl->info.out_width; + outh = ovl->info.out_height; + } + + if (init) { + posx = 0; + posy = 0; + } else { + posx = ovl->info.pos_x; + posy = ovl->info.pos_y; + } + + r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); + if (r) + goto err; + + if (!init && ovl->manager) + ovl->manager->apply(ovl->manager); + } + return 0; +err: + DBG("apply_changes failed\n"); + return r; +} + +/* checks var and eventually tweaks it to something supported, + * DO NOT MODIFY PAR */ +static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) +{ + int r; + + DBG("check_var(%d)\n", FB2OFB(fbi)->id); + + r = check_fb_var(fbi, var); + + return r; +} + +/* set the video mode according to info->var */ +static int omapfb_set_par(struct fb_info *fbi) +{ + int r; + + DBG("set_par(%d)\n", FB2OFB(fbi)->id); + + set_fb_fix(fbi); + + r = setup_vrfb_rotation(fbi); + if (r) + return r; + + r = omapfb_apply_changes(fbi, 0); + + return r; +} + +static int omapfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + struct fb_var_screeninfo new_var; + int r; + + DBG("pan_display(%d)\n", FB2OFB(fbi)->id); + + if (var->xoffset == fbi->var.xoffset && + var->yoffset == fbi->var.yoffset) + return 0; + + new_var = fbi->var; + new_var.xoffset = var->xoffset; + new_var.yoffset = var->yoffset; + + fbi->var = new_var; + + r = omapfb_apply_changes(fbi, 0); + + return r; +} + +static void mmap_user_open(struct vm_area_struct *vma) +{ + struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; + + atomic_inc(&ofbi->map_count); +} + +static void mmap_user_close(struct vm_area_struct *vma) +{ + struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; + + atomic_dec(&ofbi->map_count); +} + +static struct vm_operations_struct mmap_user_ops = { + .open = mmap_user_open, + .close = mmap_user_close, +}; + +static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct fb_fix_screeninfo *fix = &fbi->fix; + unsigned long off; + unsigned long start; + u32 len; + + if (vma->vm_end - vma->vm_start == 0) + return 0; + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + off = vma->vm_pgoff << PAGE_SHIFT; + + start = omapfb_get_region_paddr(ofbi); + len = fix->smem_len; + if (off >= len) + return -EINVAL; + if ((vma->vm_end - vma->vm_start + off) > len) + return -EINVAL; + + off += start; + + DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off); + + vma->vm_pgoff = off >> PAGE_SHIFT; + vma->vm_flags |= VM_IO | VM_RESERVED; + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + vma->vm_ops = &mmap_user_ops; + vma->vm_private_data = ofbi; + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot)) + return -EAGAIN; + /* vm_ops.open won't be called for mmap itself. */ + atomic_inc(&ofbi->map_count); + return 0; +} + +/* Store a single color palette entry into a pseudo palette or the hardware + * palette if one is available. For now we support only 16bpp and thus store + * the entry only to the pseudo palette. + */ +static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, + u_int blue, u_int transp, int update_hw_pal) +{ + /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ + /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ + struct fb_var_screeninfo *var = &fbi->var; + int r = 0; + + enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ + + /*switch (plane->color_mode) {*/ + switch (mode) { + case OMAPFB_COLOR_YUV422: + case OMAPFB_COLOR_YUV420: + case OMAPFB_COLOR_YUY422: + r = -EINVAL; + break; + case OMAPFB_COLOR_CLUT_8BPP: + case OMAPFB_COLOR_CLUT_4BPP: + case OMAPFB_COLOR_CLUT_2BPP: + case OMAPFB_COLOR_CLUT_1BPP: + /* + if (fbdev->ctrl->setcolreg) + r = fbdev->ctrl->setcolreg(regno, red, green, blue, + transp, update_hw_pal); + */ + /* Fallthrough */ + r = -EINVAL; + break; + case OMAPFB_COLOR_RGB565: + case OMAPFB_COLOR_RGB444: + case OMAPFB_COLOR_RGB24P: + case OMAPFB_COLOR_RGB24U: + if (r != 0) + break; + + if (regno < 0) { + r = -EINVAL; + break; + } + + if (regno < 16) { + u16 pal; + pal = ((red >> (16 - var->red.length)) << + var->red.offset) | + ((green >> (16 - var->green.length)) << + var->green.offset) | + (blue >> (16 - var->blue.length)); + ((u32 *)(fbi->pseudo_palette))[regno] = pal; + } + break; + default: + BUG(); + } + return r; +} + +static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + DBG("setcolreg\n"); + + return _setcolreg(info, regno, red, green, blue, transp, 1); +} + +static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) +{ + int count, index, r; + u16 *red, *green, *blue, *transp; + u16 trans = 0xffff; + + DBG("setcmap\n"); + + red = cmap->red; + green = cmap->green; + blue = cmap->blue; + transp = cmap->transp; + index = cmap->start; + + for (count = 0; count < cmap->len; count++) { + if (transp) + trans = *transp++; + r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, + count == cmap->len - 1); + if (r != 0) + return r; + } + + return 0; +} + +static int omapfb_blank(int blank, struct fb_info *fbi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_dss_device *display = fb2display(fbi); + int do_update = 0; + int r = 0; + + omapfb_lock(fbdev); + + switch (blank) { + case FB_BLANK_UNBLANK: + if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) + goto exit; + + if (display->resume) + r = display->resume(display); + + if (r == 0 && display->get_update_mode && + display->get_update_mode(display) == + OMAP_DSS_UPDATE_MANUAL) + do_update = 1; + + break; + + case FB_BLANK_NORMAL: + /* FB_BLANK_NORMAL could be implemented. + * Needs DSS additions. */ + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + if (display->state != OMAP_DSS_DISPLAY_ACTIVE) + goto exit; + + if (display->suspend) + r = display->suspend(display); + + break; + + default: + r = -EINVAL; + } + +exit: + omapfb_unlock(fbdev); + + if (r == 0 && do_update && display->update) { + u16 w, h; + display->get_resolution(display, &w, &h); + + r = display->update(display, 0, 0, w, h); + } + + return r; +} + +#if 0 +/* XXX fb_read and fb_write are needed for VRFB */ +ssize_t omapfb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos); + /* XXX needed for VRFB */ + return count; +} +#endif + +static struct fb_ops omapfb_ops = { + .owner = THIS_MODULE, + .fb_open = omapfb_open, + .fb_release = omapfb_release, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = omapfb_blank, + .fb_ioctl = omapfb_ioctl, + .fb_check_var = omapfb_check_var, + .fb_set_par = omapfb_set_par, + .fb_pan_display = omapfb_pan_display, + .fb_mmap = omapfb_mmap, + .fb_setcolreg = omapfb_setcolreg, + .fb_setcmap = omapfb_setcmap, + /*.fb_write = omapfb_write,*/ +}; + +static void omapfb_free_fbmem(struct fb_info *fbi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omapfb2_mem_region *rg; + + rg = &ofbi->region; + + if (rg->paddr) + if (omap_vram_free(rg->paddr, rg->size)) + dev_err(fbdev->dev, "VRAM FREE failed\n"); + + if (rg->vaddr) + iounmap(rg->vaddr); + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + /* unmap the 0 angle rotation */ + if (rg->vrfb.vaddr[0]) { + iounmap(rg->vrfb.vaddr[0]); + omap_vrfb_release_ctx(&rg->vrfb); + } + } + + rg->vaddr = NULL; + rg->paddr = 0; + rg->alloc = 0; + rg->size = 0; +} + +static void clear_fb_info(struct fb_info *fbi) +{ + memset(&fbi->var, 0, sizeof(fbi->var)); + memset(&fbi->fix, 0, sizeof(fbi->fix)); + strlcpy(fbi->fix.id, MODULE_NAME, sizeof(fbi->fix.id)); +} + +static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) +{ + int i; + + DBG("free all fbmem\n"); + + for (i = 0; i < fbdev->num_fbs; i++) { + struct fb_info *fbi = fbdev->fbs[i]; + omapfb_free_fbmem(fbi); + clear_fb_info(fbi); + } + + return 0; +} + +static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + unsigned long paddr) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omapfb2_mem_region *rg; + void __iomem *vaddr; + int r; + + rg = &ofbi->region; + memset(rg, 0, sizeof(*rg)); + + size = PAGE_ALIGN(size); + + if (!paddr) { + DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); + r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr); + } else { + DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr, + ofbi->id); + r = omap_vram_reserve(paddr, size); + } + + if (r) { + dev_err(fbdev->dev, "failed to allocate framebuffer\n"); + return -ENOMEM; + } + + if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) { + vaddr = ioremap_wc(paddr, size); + + if (!vaddr) { + dev_err(fbdev->dev, "failed to ioremap framebuffer\n"); + omap_vram_free(paddr, size); + return -ENOMEM; + } + + DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); + } else { + r = omap_vrfb_request_ctx(&rg->vrfb); + if (r) { + dev_err(fbdev->dev, "vrfb create ctx failed\n"); + return r; + } + + vaddr = NULL; + } + + rg->paddr = paddr; + rg->vaddr = vaddr; + rg->size = size; + rg->alloc = 1; + + return 0; +} + +/* allocate fbmem using display resolution as reference */ +static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, + unsigned long paddr) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omap_dss_device *display; + int bytespp; + + display = fb2display(fbi); + + if (!display) + return 0; + + switch (display->get_recommended_bpp(display)) { + case 16: + bytespp = 2; + break; + case 24: + bytespp = 4; + break; + default: + bytespp = 4; + break; + } + + if (!size) { + u16 w, h; + + display->get_resolution(display, &w, &h); + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + size = max(omap_vrfb_min_phys_size(w, h, bytespp), + omap_vrfb_min_phys_size(h, w, bytespp)); + + DBG("adjusting fb mem size for VRFB, %u -> %lu\n", + w * h * bytespp, size); + } else { + size = w * h * bytespp; + } + } + + if (!size) + return 0; + + return omapfb_alloc_fbmem(fbi, size, paddr); +} + +static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt) +{ + enum omap_color_mode mode; + + switch (fmt) { + case OMAPFB_COLOR_RGB565: + mode = OMAP_DSS_COLOR_RGB16; + break; + case OMAPFB_COLOR_YUV422: + mode = OMAP_DSS_COLOR_YUV2; + break; + case OMAPFB_COLOR_CLUT_8BPP: + mode = OMAP_DSS_COLOR_CLUT8; + break; + case OMAPFB_COLOR_CLUT_4BPP: + mode = OMAP_DSS_COLOR_CLUT4; + break; + case OMAPFB_COLOR_CLUT_2BPP: + mode = OMAP_DSS_COLOR_CLUT2; + break; + case OMAPFB_COLOR_CLUT_1BPP: + mode = OMAP_DSS_COLOR_CLUT1; + break; + case OMAPFB_COLOR_RGB444: + mode = OMAP_DSS_COLOR_RGB12U; + break; + case OMAPFB_COLOR_YUY422: + mode = OMAP_DSS_COLOR_UYVY; + break; + case OMAPFB_COLOR_ARGB16: + mode = OMAP_DSS_COLOR_ARGB16; + break; + case OMAPFB_COLOR_RGB24U: + mode = OMAP_DSS_COLOR_RGB24U; + break; + case OMAPFB_COLOR_RGB24P: + mode = OMAP_DSS_COLOR_RGB24P; + break; + case OMAPFB_COLOR_ARGB32: + mode = OMAP_DSS_COLOR_ARGB32; + break; + case OMAPFB_COLOR_RGBA32: + mode = OMAP_DSS_COLOR_RGBA32; + break; + case OMAPFB_COLOR_RGBX32: + mode = OMAP_DSS_COLOR_RGBX32; + break; + default: + mode = -EINVAL; + } + + return mode; +} + +static int omapfb_parse_vram_param(const char *param, int max_entries, + unsigned long *sizes, unsigned long *paddrs) +{ + int fbnum; + unsigned long size; + unsigned long paddr = 0; + char *p, *start; + + start = (char *)param; + + while (1) { + p = start; + + fbnum = simple_strtoul(p, &p, 10); + + if (p == param) + return -EINVAL; + + if (*p != ':') + return -EINVAL; + + if (fbnum >= max_entries) + return -EINVAL; + + size = memparse(p + 1, &p); + + if (!size) + return -EINVAL; + + paddr = 0; + + if (*p == '@') { + paddr = simple_strtoul(p + 1, &p, 16); + + if (!paddr) + return -EINVAL; + + } + + paddrs[fbnum] = paddr; + sizes[fbnum] = size; + + if (*p == 0) + break; + + if (*p != ',') + return -EINVAL; + + ++p; + + start = p; + } + + return 0; +} + +static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) +{ + int i, r; + unsigned long vram_sizes[10]; + unsigned long vram_paddrs[10]; + + memset(&vram_sizes, 0, sizeof(vram_sizes)); + memset(&vram_paddrs, 0, sizeof(vram_paddrs)); + + if (def_vram && omapfb_parse_vram_param(def_vram, 10, + vram_sizes, vram_paddrs)) { + dev_err(fbdev->dev, "failed to parse vram parameter\n"); + + memset(&vram_sizes, 0, sizeof(vram_sizes)); + memset(&vram_paddrs, 0, sizeof(vram_paddrs)); + } + + if (fbdev->dev->platform_data) { + struct omapfb_platform_data *opd; + opd = fbdev->dev->platform_data; + for (i = 0; i < opd->mem_desc.region_cnt; ++i) { + if (!vram_sizes[i]) { + unsigned long size; + unsigned long paddr; + + size = opd->mem_desc.region[i].size; + paddr = opd->mem_desc.region[i].paddr; + + vram_sizes[i] = size; + vram_paddrs[i] = paddr; + } + } + } + + for (i = 0; i < fbdev->num_fbs; i++) { + /* allocate memory automatically only for fb0, or if + * excplicitly defined with vram or plat data option */ + if (i == 0 || vram_sizes[i] != 0) { + r = omapfb_alloc_fbmem_display(fbdev->fbs[i], + vram_sizes[i], vram_paddrs[i]); + + if (r) + return r; + } + } + + for (i = 0; i < fbdev->num_fbs; i++) { + struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); + struct omapfb2_mem_region *rg; + rg = &ofbi->region; + + DBG("region%d phys %08x virt %p size=%lu\n", + i, + rg->paddr, + rg->vaddr, + rg->size); + } + + return 0; +} + +int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_dss_device *display = fb2display(fbi); + struct omapfb2_mem_region *rg = &ofbi->region; + unsigned long old_size = rg->size; + unsigned long old_paddr = rg->paddr; + int old_type = rg->type; + int r; + + if (type > OMAPFB_MEMTYPE_MAX) + return -EINVAL; + + size = PAGE_ALIGN(size); + + if (old_size == size && old_type == type) + return 0; + + if (display && display->sync) + display->sync(display); + + omapfb_free_fbmem(fbi); + + if (size == 0) { + clear_fb_info(fbi); + return 0; + } + + r = omapfb_alloc_fbmem(fbi, size, 0); + + if (r) { + if (old_size) + omapfb_alloc_fbmem(fbi, old_size, old_paddr); + + if (rg->size == 0) + clear_fb_info(fbi); + + return r; + } + + if (old_size == size) + return 0; + + if (old_size == 0) { + DBG("initializing fb %d\n", ofbi->id); + r = omapfb_fb_init(fbdev, fbi); + if (r) { + DBG("omapfb_fb_init failed\n"); + goto err; + } + r = omapfb_apply_changes(fbi, 1); + if (r) { + DBG("omapfb_apply_changes failed\n"); + goto err; + } + } else { + struct fb_var_screeninfo new_var; + memcpy(&new_var, &fbi->var, sizeof(new_var)); + r = check_fb_var(fbi, &new_var); + if (r) + goto err; + memcpy(&fbi->var, &new_var, sizeof(fbi->var)); + set_fb_fix(fbi); + r = setup_vrfb_rotation(fbi); + if (r) + goto err; + } + + return 0; +err: + omapfb_free_fbmem(fbi); + clear_fb_info(fbi); + return r; +} + +/* initialize fb_info, var, fix to something sane based on the display */ +static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) +{ + struct fb_var_screeninfo *var = &fbi->var; + struct omap_dss_device *display = fb2display(fbi); + struct omapfb_info *ofbi = FB2OFB(fbi); + int r = 0; + + fbi->fbops = &omapfb_ops; + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = fbdev->pseudo_palette; + + if (ofbi->region.size == 0) { + clear_fb_info(fbi); + return 0; + } + + var->nonstd = 0; + var->bits_per_pixel = 0; + + var->rotate = def_rotate; + + /* + * Check if there is a default color format set in the board file, + * and use this format instead the default deducted from the + * display bpp. + */ + if (fbdev->dev->platform_data) { + struct omapfb_platform_data *opd; + int id = ofbi->id; + + opd = fbdev->dev->platform_data; + if (opd->mem_desc.region[id].format_used) { + enum omap_color_mode mode; + enum omapfb_color_format format; + + format = opd->mem_desc.region[id].format; + mode = fb_format_to_dss_mode(format); + if (mode < 0) { + r = mode; + goto err; + } + r = dss_mode_to_fb_mode(mode, var); + if (r < 0) + goto err; + } + } + + if (display) { + u16 w, h; + int rotation = (var->rotate + ofbi->rotation[0]) % 4; + + display->get_resolution(display, &w, &h); + + if (rotation == FB_ROTATE_CW || + rotation == FB_ROTATE_CCW) { + var->xres = h; + var->yres = w; + } else { + var->xres = w; + var->yres = h; + } + + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + + if (!var->bits_per_pixel) { + switch (display->get_recommended_bpp(display)) { + case 16: + var->bits_per_pixel = 16; + break; + case 24: + var->bits_per_pixel = 32; + break; + default: + dev_err(fbdev->dev, "illegal display " + "bpp\n"); + return -EINVAL; + } + } + } else { + /* if there's no display, let's just guess some basic values */ + var->xres = 320; + var->yres = 240; + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + if (!var->bits_per_pixel) + var->bits_per_pixel = 16; + } + + r = check_fb_var(fbi, var); + if (r) + goto err; + + set_fb_fix(fbi); + r = setup_vrfb_rotation(fbi); + if (r) + goto err; + + r = fb_alloc_cmap(&fbi->cmap, 256, 0); + if (r) + dev_err(fbdev->dev, "unable to allocate color map memory\n"); + +err: + return r; +} + +static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) +{ + fb_dealloc_cmap(&fbi->cmap); +} + + +static void omapfb_free_resources(struct omapfb2_device *fbdev) +{ + int i; + + DBG("free_resources\n"); + + if (fbdev == NULL) + return; + + for (i = 0; i < fbdev->num_fbs; i++) + unregister_framebuffer(fbdev->fbs[i]); + + /* free the reserved fbmem */ + omapfb_free_all_fbmem(fbdev); + + for (i = 0; i < fbdev->num_fbs; i++) { + fbinfo_cleanup(fbdev, fbdev->fbs[i]); + framebuffer_release(fbdev->fbs[i]); + } + + for (i = 0; i < fbdev->num_displays; i++) { + if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) + fbdev->displays[i]->disable(fbdev->displays[i]); + + omap_dss_put_device(fbdev->displays[i]); + } + + dev_set_drvdata(fbdev->dev, NULL); + kfree(fbdev); +} + +static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) +{ + int r, i; + + fbdev->num_fbs = 0; + + DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); + + /* allocate fb_infos */ + for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { + struct fb_info *fbi; + struct omapfb_info *ofbi; + + fbi = framebuffer_alloc(sizeof(struct omapfb_info), + fbdev->dev); + + if (fbi == NULL) { + dev_err(fbdev->dev, + "unable to allocate memory for plane info\n"); + return -ENOMEM; + } + + clear_fb_info(fbi); + + fbdev->fbs[i] = fbi; + + ofbi = FB2OFB(fbi); + ofbi->fbdev = fbdev; + ofbi->id = i; + + /* assign these early, so that fb alloc can use them */ + ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : + OMAP_DSS_ROT_DMA; + ofbi->mirror = def_mirror; + + fbdev->num_fbs++; + } + + DBG("fb_infos allocated\n"); + + /* assign overlays for the fbs */ + for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { + struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); + + ofbi->overlays[0] = fbdev->overlays[i]; + ofbi->num_overlays = 1; + } + + /* allocate fb memories */ + r = omapfb_allocate_all_fbs(fbdev); + if (r) { + dev_err(fbdev->dev, "failed to allocate fbmem\n"); + return r; + } + + DBG("fbmems allocated\n"); + + /* setup fb_infos */ + for (i = 0; i < fbdev->num_fbs; i++) { + r = omapfb_fb_init(fbdev, fbdev->fbs[i]); + if (r) { + dev_err(fbdev->dev, "failed to setup fb_info\n"); + return r; + } + } + + DBG("fb_infos initialized\n"); + + for (i = 0; i < fbdev->num_fbs; i++) { + r = register_framebuffer(fbdev->fbs[i]); + if (r != 0) { + dev_err(fbdev->dev, + "registering framebuffer %d failed\n", i); + return r; + } + } + + DBG("framebuffers registered\n"); + + for (i = 0; i < fbdev->num_fbs; i++) { + r = omapfb_apply_changes(fbdev->fbs[i], 1); + if (r) { + dev_err(fbdev->dev, "failed to change mode\n"); + return r; + } + } + + DBG("create sysfs for fbs\n"); + r = omapfb_create_sysfs(fbdev); + if (r) { + dev_err(fbdev->dev, "failed to create sysfs entries\n"); + return r; + } + + /* Enable fb0 */ + if (fbdev->num_fbs > 0) { + struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); + + if (ofbi->num_overlays > 0) { + struct omap_overlay *ovl = ofbi->overlays[0]; + + r = omapfb_overlay_enable(ovl, 1); + + if (r) { + dev_err(fbdev->dev, + "failed to enable overlay\n"); + return r; + } + } + } + + DBG("create_framebuffers done\n"); + + return 0; +} + +static int omapfb_mode_to_timings(const char *mode_str, + struct omap_video_timings *timings, u8 *bpp) +{ + struct fb_info fbi; + struct fb_var_screeninfo var; + struct fb_ops fbops; + int r; + +#ifdef CONFIG_OMAP2_DSS_VENC + if (strcmp(mode_str, "pal") == 0) { + *timings = omap_dss_pal_timings; + *bpp = 0; + return 0; + } else if (strcmp(mode_str, "ntsc") == 0) { + *timings = omap_dss_ntsc_timings; + *bpp = 0; + return 0; + } +#endif + + /* this is quite a hack, but I wanted to use the modedb and for + * that we need fb_info and var, so we create dummy ones */ + + memset(&fbi, 0, sizeof(fbi)); + memset(&var, 0, sizeof(var)); + memset(&fbops, 0, sizeof(fbops)); + fbi.fbops = &fbops; + + r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24); + + if (r != 0) { + timings->pixel_clock = PICOS2KHZ(var.pixclock); + timings->hfp = var.left_margin; + timings->hbp = var.right_margin; + timings->vfp = var.upper_margin; + timings->vbp = var.lower_margin; + timings->hsw = var.hsync_len; + timings->vsw = var.vsync_len; + timings->x_res = var.xres; + timings->y_res = var.yres; + + switch (var.bits_per_pixel) { + case 16: + *bpp = 16; + break; + case 24: + case 32: + default: + *bpp = 24; + break; + } + + return 0; + } else { + return -EINVAL; + } +} + +static int omapfb_set_def_mode(struct omap_dss_device *display, char *mode_str) +{ + int r; + u8 bpp; + struct omap_video_timings timings; + + r = omapfb_mode_to_timings(mode_str, &timings, &bpp); + if (r) + return r; + + display->panel.recommended_bpp = bpp; + + if (!display->check_timings || !display->set_timings) + return -EINVAL; + + r = display->check_timings(display, &timings); + if (r) + return r; + + display->set_timings(display, &timings); + + return 0; +} + +static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) +{ + char *str, *options, *this_opt; + int r = 0; + + str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL); + strcpy(str, def_mode); + options = str; + + while (!r && (this_opt = strsep(&options, ",")) != NULL) { + char *p, *display_str, *mode_str; + struct omap_dss_device *display; + int i; + + p = strchr(this_opt, ':'); + if (!p) { + r = -EINVAL; + break; + } + + *p = 0; + display_str = this_opt; + mode_str = p + 1; + + display = NULL; + for (i = 0; i < fbdev->num_displays; ++i) { + if (strcmp(fbdev->displays[i]->name, + display_str) == 0) { + display = fbdev->displays[i]; + break; + } + } + + if (!display) { + r = -EINVAL; + break; + } + + r = omapfb_set_def_mode(display, mode_str); + if (r) + break; + } + + kfree(str); + + return r; +} + +static int omapfb_probe(struct platform_device *pdev) +{ + struct omapfb2_device *fbdev = NULL; + int r = 0; + int i; + struct omap_overlay *ovl; + struct omap_dss_device *def_display; + struct omap_dss_device *dssdev; + + DBG("omapfb_probe\n"); + + if (pdev->num_resources != 0) { + dev_err(&pdev->dev, "probed for an unknown device\n"); + r = -ENODEV; + goto err0; + } + + fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); + if (fbdev == NULL) { + r = -ENOMEM; + goto err0; + } + + mutex_init(&fbdev->mtx); + + fbdev->dev = &pdev->dev; + platform_set_drvdata(pdev, fbdev); + + fbdev->num_displays = 0; + dssdev = NULL; + for_each_dss_dev(dssdev) { + omap_dss_get_device(dssdev); + fbdev->displays[fbdev->num_displays++] = dssdev; + } + + if (fbdev->num_displays == 0) { + dev_err(&pdev->dev, "no displays\n"); + r = -EINVAL; + goto cleanup; + } + + fbdev->num_overlays = omap_dss_get_num_overlays(); + for (i = 0; i < fbdev->num_overlays; i++) + fbdev->overlays[i] = omap_dss_get_overlay(i); + + fbdev->num_managers = omap_dss_get_num_overlay_managers(); + for (i = 0; i < fbdev->num_managers; i++) + fbdev->managers[i] = omap_dss_get_overlay_manager(i); + + if (def_mode && strlen(def_mode) > 0) { + if (omapfb_parse_def_modes(fbdev)) + dev_warn(&pdev->dev, "cannot parse default modes\n"); + } + + r = omapfb_create_framebuffers(fbdev); + if (r) + goto cleanup; + + for (i = 0; i < fbdev->num_managers; i++) { + struct omap_overlay_manager *mgr; + mgr = fbdev->managers[i]; + r = mgr->apply(mgr); + if (r) + dev_warn(fbdev->dev, "failed to apply dispc config\n"); + } + + DBG("mgr->apply'ed\n"); + + /* gfx overlay should be the default one. find a display + * connected to that, and use it as default display */ + ovl = omap_dss_get_overlay(0); + if (ovl->manager && ovl->manager->device) { + def_display = ovl->manager->device; + } else { + dev_warn(&pdev->dev, "cannot find default display\n"); + def_display = NULL; + } + + if (def_display) { +#ifndef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE + u16 w, h; +#endif + r = def_display->enable(def_display); + if (r) + dev_warn(fbdev->dev, "Failed to enable display '%s'\n", + def_display->name); + + /* set the update mode */ + if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { +#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE + if (def_display->enable_te) + def_display->enable_te(def_display, 1); + if (def_display->set_update_mode) + def_display->set_update_mode(def_display, + OMAP_DSS_UPDATE_AUTO); +#else /* MANUAL_UPDATE */ + if (def_display->enable_te) + def_display->enable_te(def_display, 0); + if (def_display->set_update_mode) + def_display->set_update_mode(def_display, + OMAP_DSS_UPDATE_MANUAL); + + def_display->get_resolution(def_display, &w, &h); + def_display->update(def_display, 0, 0, w, h); +#endif + } else { + if (def_display->set_update_mode) + def_display->set_update_mode(def_display, + OMAP_DSS_UPDATE_AUTO); + } + } + + return 0; + +cleanup: + omapfb_free_resources(fbdev); +err0: + dev_err(&pdev->dev, "failed to setup omapfb\n"); + return r; +} + +static int omapfb_remove(struct platform_device *pdev) +{ + struct omapfb2_device *fbdev = platform_get_drvdata(pdev); + + /* FIXME: wait till completion of pending events */ + + omapfb_remove_sysfs(fbdev); + + omapfb_free_resources(fbdev); + + return 0; +} + +static struct platform_driver omapfb_driver = { + .probe = omapfb_probe, + .remove = omapfb_remove, + .driver = { + .name = "omapfb", + .owner = THIS_MODULE, + }, +}; + +static int __init omapfb_init(void) +{ + DBG("omapfb_init\n"); + + if (platform_driver_register(&omapfb_driver)) { + printk(KERN_ERR "failed to register omapfb driver\n"); + return -ENODEV; + } + + return 0; +} + +static void __exit omapfb_exit(void) +{ + DBG("omapfb_exit\n"); + platform_driver_unregister(&omapfb_driver); +} + +module_param_named(mode, def_mode, charp, 0); +module_param_named(vram, def_vram, charp, 0); +module_param_named(rotate, def_rotate, int, 0); +module_param_named(vrfb, def_vrfb, bool, 0); +module_param_named(mirror, def_mirror, bool, 0); + +/* late_initcall to let panel/ctrl drivers loaded first. + * I guess better option would be a more dynamic approach, + * so that omapfb reacts to new panels when they are loaded */ +late_initcall(omapfb_init); +/*module_init(omapfb_init);*/ +module_exit(omapfb_exit); + +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>"); +MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c new file mode 100644 index 00000000000..62bb88f5c19 --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c @@ -0,0 +1,507 @@ +/* + * linux/drivers/video/omap2/omapfb-sysfs.c + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/fb.h> +#include <linux/sysfs.h> +#include <linux/device.h> +#include <linux/uaccess.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/omapfb.h> + +#include <plat/display.h> +#include <plat/vrfb.h> + +#include "omapfb.h" + +static ssize_t show_rotate_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + + return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type); +} + +static ssize_t store_rotate_type(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + enum omap_dss_rotation_type rot_type; + int r; + + rot_type = simple_strtoul(buf, NULL, 0); + + if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB) + return -EINVAL; + + lock_fb_info(fbi); + + r = 0; + if (rot_type == ofbi->rotation_type) + goto out; + + if (ofbi->region.size) { + r = -EBUSY; + goto out; + } + + ofbi->rotation_type = rot_type; + + /* + * Since the VRAM for this FB is not allocated at the moment we don't + * need to do any further parameter checking at this point. + */ +out: + unlock_fb_info(fbi); + + return r ? r : count; +} + + +static ssize_t show_mirror(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + + return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror); +} + +static ssize_t store_mirror(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + bool mirror; + int r; + struct fb_var_screeninfo new_var; + + mirror = simple_strtoul(buf, NULL, 0); + + if (mirror != 0 && mirror != 1) + return -EINVAL; + + lock_fb_info(fbi); + + ofbi->mirror = mirror; + + memcpy(&new_var, &fbi->var, sizeof(new_var)); + r = check_fb_var(fbi, &new_var); + if (r) + goto out; + memcpy(&fbi->var, &new_var, sizeof(fbi->var)); + + set_fb_fix(fbi); + + r = omapfb_apply_changes(fbi, 0); + if (r) + goto out; + + r = count; +out: + unlock_fb_info(fbi); + + return r; +} + +static ssize_t show_overlays(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + ssize_t l = 0; + int t; + + omapfb_lock(fbdev); + lock_fb_info(fbi); + + for (t = 0; t < ofbi->num_overlays; t++) { + struct omap_overlay *ovl = ofbi->overlays[t]; + int ovlnum; + + for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum) + if (ovl == fbdev->overlays[ovlnum]) + break; + + l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", + t == 0 ? "" : ",", ovlnum); + } + + l += snprintf(buf + l, PAGE_SIZE - l, "\n"); + + unlock_fb_info(fbi); + omapfb_unlock(fbdev); + + return l; +} + +static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev, + struct omap_overlay *ovl) +{ + int i, t; + + for (i = 0; i < fbdev->num_fbs; i++) { + struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); + + for (t = 0; t < ofbi->num_overlays; t++) { + if (ofbi->overlays[t] == ovl) + return ofbi; + } + } + + return NULL; +} + +static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; + struct omap_overlay *ovl; + int num_ovls, r, i; + int len; + bool added = false; + + num_ovls = 0; + + len = strlen(buf); + if (buf[len - 1] == '\n') + len = len - 1; + + omapfb_lock(fbdev); + lock_fb_info(fbi); + + if (len > 0) { + char *p = (char *)buf; + int ovlnum; + + while (p < buf + len) { + int found; + if (num_ovls == OMAPFB_MAX_OVL_PER_FB) { + r = -EINVAL; + goto out; + } + + ovlnum = simple_strtoul(p, &p, 0); + if (ovlnum > fbdev->num_overlays) { + r = -EINVAL; + goto out; + } + + found = 0; + for (i = 0; i < num_ovls; ++i) { + if (ovls[i] == fbdev->overlays[ovlnum]) { + found = 1; + break; + } + } + + if (!found) + ovls[num_ovls++] = fbdev->overlays[ovlnum]; + + p++; + } + } + + for (i = 0; i < num_ovls; ++i) { + struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]); + if (ofbi2 && ofbi2 != ofbi) { + dev_err(fbdev->dev, "overlay already in use\n"); + r = -EINVAL; + goto out; + } + } + + /* detach unused overlays */ + for (i = 0; i < ofbi->num_overlays; ++i) { + int t, found; + + ovl = ofbi->overlays[i]; + + found = 0; + + for (t = 0; t < num_ovls; ++t) { + if (ovl == ovls[t]) { + found = 1; + break; + } + } + + if (found) + continue; + + DBG("detaching %d\n", ofbi->overlays[i]->id); + + omapfb_overlay_enable(ovl, 0); + + if (ovl->manager) + ovl->manager->apply(ovl->manager); + + for (t = i + 1; t < ofbi->num_overlays; t++) { + ofbi->rotation[t-1] = ofbi->rotation[t]; + ofbi->overlays[t-1] = ofbi->overlays[t]; + } + + ofbi->num_overlays--; + i--; + } + + for (i = 0; i < num_ovls; ++i) { + int t, found; + + ovl = ovls[i]; + + found = 0; + + for (t = 0; t < ofbi->num_overlays; ++t) { + if (ovl == ofbi->overlays[t]) { + found = 1; + break; + } + } + + if (found) + continue; + ofbi->rotation[ofbi->num_overlays] = 0; + ofbi->overlays[ofbi->num_overlays++] = ovl; + + added = true; + } + + if (added) { + r = omapfb_apply_changes(fbi, 0); + if (r) + goto out; + } + + r = count; +out: + unlock_fb_info(fbi); + omapfb_unlock(fbdev); + + return r; +} + +static ssize_t show_overlays_rotate(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + ssize_t l = 0; + int t; + + lock_fb_info(fbi); + + for (t = 0; t < ofbi->num_overlays; t++) { + l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", + t == 0 ? "" : ",", ofbi->rotation[t]); + } + + l += snprintf(buf + l, PAGE_SIZE - l, "\n"); + + unlock_fb_info(fbi); + + return l; +} + +static ssize_t store_overlays_rotate(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + int num_ovls = 0, r, i; + int len; + bool changed = false; + u8 rotation[OMAPFB_MAX_OVL_PER_FB]; + + len = strlen(buf); + if (buf[len - 1] == '\n') + len = len - 1; + + lock_fb_info(fbi); + + if (len > 0) { + char *p = (char *)buf; + + while (p < buf + len) { + int rot; + + if (num_ovls == ofbi->num_overlays) { + r = -EINVAL; + goto out; + } + + rot = simple_strtoul(p, &p, 0); + if (rot < 0 || rot > 3) { + r = -EINVAL; + goto out; + } + + if (ofbi->rotation[num_ovls] != rot) + changed = true; + + rotation[num_ovls++] = rot; + + p++; + } + } + + if (num_ovls != ofbi->num_overlays) { + r = -EINVAL; + goto out; + } + + if (changed) { + for (i = 0; i < num_ovls; ++i) + ofbi->rotation[i] = rotation[i]; + + r = omapfb_apply_changes(fbi, 0); + if (r) + goto out; + + /* FIXME error handling? */ + } + + r = count; +out: + unlock_fb_info(fbi); + + return r; +} + +static ssize_t show_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + + return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size); +} + +static ssize_t store_size(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + unsigned long size; + int r; + int i; + + size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0)); + + lock_fb_info(fbi); + + for (i = 0; i < ofbi->num_overlays; i++) { + if (ofbi->overlays[i]->info.enabled) { + r = -EBUSY; + goto out; + } + } + + if (size != ofbi->region.size) { + r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type); + if (r) { + dev_err(dev, "realloc fbmem failed\n"); + goto out; + } + } + + r = count; +out: + unlock_fb_info(fbi); + + return r; +} + +static ssize_t show_phys(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + + return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr); +} + +static ssize_t show_virt(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fbi = dev_get_drvdata(dev); + struct omapfb_info *ofbi = FB2OFB(fbi); + + return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr); +} + +static struct device_attribute omapfb_attrs[] = { + __ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type, + store_rotate_type), + __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror), + __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size), + __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays), + __ATTR(overlays_rotate, S_IRUGO | S_IWUSR, show_overlays_rotate, + store_overlays_rotate), + __ATTR(phys_addr, S_IRUGO, show_phys, NULL), + __ATTR(virt_addr, S_IRUGO, show_virt, NULL), +}; + +int omapfb_create_sysfs(struct omapfb2_device *fbdev) +{ + int i; + int r; + + DBG("create sysfs for fbs\n"); + for (i = 0; i < fbdev->num_fbs; i++) { + int t; + for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) { + r = device_create_file(fbdev->fbs[i]->dev, + &omapfb_attrs[t]); + + if (r) { + dev_err(fbdev->dev, "failed to create sysfs " + "file\n"); + return r; + } + } + } + + return 0; +} + +void omapfb_remove_sysfs(struct omapfb2_device *fbdev) +{ + int i, t; + + DBG("remove sysfs for fbs\n"); + for (i = 0; i < fbdev->num_fbs; i++) { + for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) + device_remove_file(fbdev->fbs[i]->dev, + &omapfb_attrs[t]); + } +} + diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h new file mode 100644 index 00000000000..f7c9c739e5e --- /dev/null +++ b/drivers/video/omap2/omapfb/omapfb.h @@ -0,0 +1,146 @@ +/* + * linux/drivers/video/omap2/omapfb.h + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * Some code and ideas taken from drivers/video/omap/ driver + * by Imre Deak. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ +#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ + +#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT +#define DEBUG +#endif + +#include <plat/display.h> + +#ifdef DEBUG +extern unsigned int omapfb_debug; +#define DBG(format, ...) \ + if (omapfb_debug) \ + printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) +#else +#define DBG(format, ...) +#endif + +#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) + +/* max number of overlays to which a framebuffer data can be direct */ +#define OMAPFB_MAX_OVL_PER_FB 3 + +struct omapfb2_mem_region { + u32 paddr; + void __iomem *vaddr; + struct vrfb vrfb; + unsigned long size; + u8 type; /* OMAPFB_PLANE_MEM_* */ + bool alloc; /* allocated by the driver */ + bool map; /* kernel mapped by the driver */ +}; + +/* appended to fb_info */ +struct omapfb_info { + int id; + struct omapfb2_mem_region region; + atomic_t map_count; + int num_overlays; + struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; + struct omapfb2_device *fbdev; + enum omap_dss_rotation_type rotation_type; + u8 rotation[OMAPFB_MAX_OVL_PER_FB]; + bool mirror; +}; + +struct omapfb2_device { + struct device *dev; + struct mutex mtx; + + u32 pseudo_palette[17]; + + int state; + + unsigned num_fbs; + struct fb_info *fbs[10]; + + unsigned num_displays; + struct omap_dss_device *displays[10]; + unsigned num_overlays; + struct omap_overlay *overlays[10]; + unsigned num_managers; + struct omap_overlay_manager *managers[10]; +}; + +struct omapfb_colormode { + enum omap_color_mode dssmode; + u32 bits_per_pixel; + u32 nonstd; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +void set_fb_fix(struct fb_info *fbi); +int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); +int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type); +int omapfb_apply_changes(struct fb_info *fbi, int init); + +int omapfb_create_sysfs(struct omapfb2_device *fbdev); +void omapfb_remove_sysfs(struct omapfb2_device *fbdev); + +int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); + +int dss_mode_to_fb_mode(enum omap_color_mode dssmode, + struct fb_var_screeninfo *var); + +/* find the display connected to this fb, if any */ +static inline struct omap_dss_device *fb2display(struct fb_info *fbi) +{ + struct omapfb_info *ofbi = FB2OFB(fbi); + int i; + + /* XXX: returns the display connected to first attached overlay */ + for (i = 0; i < ofbi->num_overlays; i++) { + if (ofbi->overlays[i]->manager) + return ofbi->overlays[i]->manager->device; + } + + return NULL; +} + +static inline void omapfb_lock(struct omapfb2_device *fbdev) +{ + mutex_lock(&fbdev->mtx); +} + +static inline void omapfb_unlock(struct omapfb2_device *fbdev) +{ + mutex_unlock(&fbdev->mtx); +} + +static inline int omapfb_overlay_enable(struct omap_overlay *ovl, + int enable) +{ + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + info.enabled = enable; + return ovl->set_overlay_info(ovl, &info); +} + +#endif diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c new file mode 100644 index 00000000000..55a4de5e5d1 --- /dev/null +++ b/drivers/video/omap2/vram.c @@ -0,0 +1,655 @@ +/* + * VRAM manager for OMAP + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include <linux/bootmem.h> +#include <linux/completion.h> +#include <linux/debugfs.h> +#include <linux/jiffies.h> +#include <linux/module.h> + +#include <asm/setup.h> + +#include <plat/sram.h> +#include <plat/vram.h> +#include <plat/dma.h> + +#ifdef DEBUG +#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__) +#else +#define DBG(format, ...) +#endif + +#define OMAP2_SRAM_START 0x40200000 +/* Maximum size, in reality this is smaller if SRAM is partially locked. */ +#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ + +/* postponed regions are used to temporarily store region information at boot + * time when we cannot yet allocate the region list */ +#define MAX_POSTPONED_REGIONS 10 + +static bool vram_initialized; +static int postponed_cnt; +static struct { + unsigned long paddr; + size_t size; +} postponed_regions[MAX_POSTPONED_REGIONS]; + +struct vram_alloc { + struct list_head list; + unsigned long paddr; + unsigned pages; +}; + +struct vram_region { + struct list_head list; + struct list_head alloc_list; + unsigned long paddr; + unsigned pages; +}; + +static DEFINE_MUTEX(region_mutex); +static LIST_HEAD(region_list); + +static inline int region_mem_type(unsigned long paddr) +{ + if (paddr >= OMAP2_SRAM_START && + paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) + return OMAP_VRAM_MEMTYPE_SRAM; + else + return OMAP_VRAM_MEMTYPE_SDRAM; +} + +static struct vram_region *omap_vram_create_region(unsigned long paddr, + unsigned pages) +{ + struct vram_region *rm; + + rm = kzalloc(sizeof(*rm), GFP_KERNEL); + + if (rm) { + INIT_LIST_HEAD(&rm->alloc_list); + rm->paddr = paddr; + rm->pages = pages; + } + + return rm; +} + +#if 0 +static void omap_vram_free_region(struct vram_region *vr) +{ + list_del(&vr->list); + kfree(vr); +} +#endif + +static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, + unsigned long paddr, unsigned pages) +{ + struct vram_alloc *va; + struct vram_alloc *new; + + new = kzalloc(sizeof(*va), GFP_KERNEL); + + if (!new) + return NULL; + + new->paddr = paddr; + new->pages = pages; + + list_for_each_entry(va, &vr->alloc_list, list) { + if (va->paddr > new->paddr) + break; + } + + list_add_tail(&new->list, &va->list); + + return new; +} + +static void omap_vram_free_allocation(struct vram_alloc *va) +{ + list_del(&va->list); + kfree(va); +} + +int omap_vram_add_region(unsigned long paddr, size_t size) +{ + struct vram_region *rm; + unsigned pages; + + if (vram_initialized) { + DBG("adding region paddr %08lx size %d\n", + paddr, size); + + size &= PAGE_MASK; + pages = size >> PAGE_SHIFT; + + rm = omap_vram_create_region(paddr, pages); + if (rm == NULL) + return -ENOMEM; + + list_add(&rm->list, ®ion_list); + } else { + if (postponed_cnt == MAX_POSTPONED_REGIONS) + return -ENOMEM; + + postponed_regions[postponed_cnt].paddr = paddr; + postponed_regions[postponed_cnt].size = size; + + ++postponed_cnt; + } + return 0; +} + +int omap_vram_free(unsigned long paddr, size_t size) +{ + struct vram_region *rm; + struct vram_alloc *alloc; + unsigned start, end; + + DBG("free mem paddr %08lx size %d\n", paddr, size); + + size = PAGE_ALIGN(size); + + mutex_lock(®ion_mutex); + + list_for_each_entry(rm, ®ion_list, list) { + list_for_each_entry(alloc, &rm->alloc_list, list) { + start = alloc->paddr; + end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); + + if (start >= paddr && end < paddr + size) + goto found; + } + } + + mutex_unlock(®ion_mutex); + return -EINVAL; + +found: + omap_vram_free_allocation(alloc); + + mutex_unlock(®ion_mutex); + return 0; +} +EXPORT_SYMBOL(omap_vram_free); + +static int _omap_vram_reserve(unsigned long paddr, unsigned pages) +{ + struct vram_region *rm; + struct vram_alloc *alloc; + size_t size; + + size = pages << PAGE_SHIFT; + + list_for_each_entry(rm, ®ion_list, list) { + unsigned long start, end; + + DBG("checking region %lx %d\n", rm->paddr, rm->pages); + + if (region_mem_type(rm->paddr) != region_mem_type(paddr)) + continue; + + start = rm->paddr; + end = start + (rm->pages << PAGE_SHIFT) - 1; + if (start > paddr || end < paddr + size - 1) + continue; + + DBG("block ok, checking allocs\n"); + + list_for_each_entry(alloc, &rm->alloc_list, list) { + end = alloc->paddr - 1; + + if (start <= paddr && end >= paddr + size - 1) + goto found; + + start = alloc->paddr + (alloc->pages << PAGE_SHIFT); + } + + end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1; + + if (!(start <= paddr && end >= paddr + size - 1)) + continue; +found: + DBG("found area start %lx, end %lx\n", start, end); + + if (omap_vram_create_allocation(rm, paddr, pages) == NULL) + return -ENOMEM; + + return 0; + } + + return -ENOMEM; +} + +int omap_vram_reserve(unsigned long paddr, size_t size) +{ + unsigned pages; + int r; + + DBG("reserve mem paddr %08lx size %d\n", paddr, size); + + size = PAGE_ALIGN(size); + pages = size >> PAGE_SHIFT; + + mutex_lock(®ion_mutex); + + r = _omap_vram_reserve(paddr, pages); + + mutex_unlock(®ion_mutex); + + return r; +} +EXPORT_SYMBOL(omap_vram_reserve); + +static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data) +{ + struct completion *compl = data; + complete(compl); +} + +static int _omap_vram_clear(u32 paddr, unsigned pages) +{ + struct completion compl; + unsigned elem_count; + unsigned frame_count; + int r; + int lch; + + init_completion(&compl); + + r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA", + _omap_vram_dma_cb, + &compl, &lch); + if (r) { + pr_err("VRAM: request_dma failed for memory clear\n"); + return -EBUSY; + } + + elem_count = pages * PAGE_SIZE / 4; + frame_count = 1; + + omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32, + elem_count, frame_count, + OMAP_DMA_SYNC_ELEMENT, + 0, 0); + + omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC, + paddr, 0, 0); + + omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000); + + omap_start_dma(lch); + + if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) { + omap_stop_dma(lch); + pr_err("VRAM: dma timeout while clearing memory\n"); + r = -EIO; + goto err; + } + + r = 0; +err: + omap_free_dma(lch); + + return r; +} + +static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) +{ + struct vram_region *rm; + struct vram_alloc *alloc; + + list_for_each_entry(rm, ®ion_list, list) { + unsigned long start, end; + + DBG("checking region %lx %d\n", rm->paddr, rm->pages); + + if (region_mem_type(rm->paddr) != mtype) + continue; + + start = rm->paddr; + + list_for_each_entry(alloc, &rm->alloc_list, list) { + end = alloc->paddr; + + if (end - start >= pages << PAGE_SHIFT) + goto found; + + start = alloc->paddr + (alloc->pages << PAGE_SHIFT); + } + + end = rm->paddr + (rm->pages << PAGE_SHIFT); +found: + if (end - start < pages << PAGE_SHIFT) + continue; + + DBG("found %lx, end %lx\n", start, end); + + alloc = omap_vram_create_allocation(rm, start, pages); + if (alloc == NULL) + return -ENOMEM; + + *paddr = start; + + _omap_vram_clear(start, pages); + + return 0; + } + + return -ENOMEM; +} + +int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) +{ + unsigned pages; + int r; + + BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size); + + DBG("alloc mem type %d size %d\n", mtype, size); + + size = PAGE_ALIGN(size); + pages = size >> PAGE_SHIFT; + + mutex_lock(®ion_mutex); + + r = _omap_vram_alloc(mtype, pages, paddr); + + mutex_unlock(®ion_mutex); + + return r; +} +EXPORT_SYMBOL(omap_vram_alloc); + +void omap_vram_get_info(unsigned long *vram, + unsigned long *free_vram, + unsigned long *largest_free_block) +{ + struct vram_region *vr; + struct vram_alloc *va; + + *vram = 0; + *free_vram = 0; + *largest_free_block = 0; + + mutex_lock(®ion_mutex); + + list_for_each_entry(vr, ®ion_list, list) { + unsigned free; + unsigned long pa; + + pa = vr->paddr; + *vram += vr->pages << PAGE_SHIFT; + + list_for_each_entry(va, &vr->alloc_list, list) { + free = va->paddr - pa; + *free_vram += free; + if (free > *largest_free_block) + *largest_free_block = free; + pa = va->paddr + (va->pages << PAGE_SHIFT); + } + + free = vr->paddr + (vr->pages << PAGE_SHIFT) - pa; + *free_vram += free; + if (free > *largest_free_block) + *largest_free_block = free; + } + + mutex_unlock(®ion_mutex); +} +EXPORT_SYMBOL(omap_vram_get_info); + +#if defined(CONFIG_DEBUG_FS) +static int vram_debug_show(struct seq_file *s, void *unused) +{ + struct vram_region *vr; + struct vram_alloc *va; + unsigned size; + + mutex_lock(®ion_mutex); + + list_for_each_entry(vr, ®ion_list, list) { + size = vr->pages << PAGE_SHIFT; + seq_printf(s, "%08lx-%08lx (%d bytes)\n", + vr->paddr, vr->paddr + size - 1, + size); + + list_for_each_entry(va, &vr->alloc_list, list) { + size = va->pages << PAGE_SHIFT; + seq_printf(s, " %08lx-%08lx (%d bytes)\n", + va->paddr, va->paddr + size - 1, + size); + } + } + + mutex_unlock(®ion_mutex); + + return 0; +} + +static int vram_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, vram_debug_show, inode->i_private); +} + +static const struct file_operations vram_debug_fops = { + .open = vram_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init omap_vram_create_debugfs(void) +{ + struct dentry *d; + + d = debugfs_create_file("vram", S_IRUGO, NULL, + NULL, &vram_debug_fops); + if (IS_ERR(d)) + return PTR_ERR(d); + + return 0; +} +#endif + +static __init int omap_vram_init(void) +{ + int i; + + vram_initialized = 1; + + for (i = 0; i < postponed_cnt; i++) + omap_vram_add_region(postponed_regions[i].paddr, + postponed_regions[i].size); + +#ifdef CONFIG_DEBUG_FS + if (omap_vram_create_debugfs()) + pr_err("VRAM: Failed to create debugfs file\n"); +#endif + + return 0; +} + +arch_initcall(omap_vram_init); + +/* boottime vram alloc stuff */ + +/* set from board file */ +static u32 omap_vram_sram_start __initdata; +static u32 omap_vram_sram_size __initdata; + +/* set from board file */ +static u32 omap_vram_sdram_start __initdata; +static u32 omap_vram_sdram_size __initdata; + +/* set from kernel cmdline */ +static u32 omap_vram_def_sdram_size __initdata; +static u32 omap_vram_def_sdram_start __initdata; + +static void __init omap_vram_early_vram(char **p) +{ + omap_vram_def_sdram_size = memparse(*p, p); + if (**p == ',') + omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16); +} +__early_param("vram=", omap_vram_early_vram); + +/* + * Called from map_io. We need to call to this early enough so that we + * can reserve the fixed SDRAM regions before VM could get hold of them. + */ +void __init omap_vram_reserve_sdram(void) +{ + struct bootmem_data *bdata; + unsigned long sdram_start, sdram_size; + u32 paddr; + u32 size = 0; + + /* cmdline arg overrides the board file definition */ + if (omap_vram_def_sdram_size) { + size = omap_vram_def_sdram_size; + paddr = omap_vram_def_sdram_start; + } + + if (!size) { + size = omap_vram_sdram_size; + paddr = omap_vram_sdram_start; + } + +#ifdef CONFIG_OMAP2_VRAM_SIZE + if (!size) { + size = CONFIG_OMAP2_VRAM_SIZE * 1024 * 1024; + paddr = 0; + } +#endif + + if (!size) + return; + + size = PAGE_ALIGN(size); + + bdata = NODE_DATA(0)->bdata; + sdram_start = bdata->node_min_pfn << PAGE_SHIFT; + sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; + + if (paddr) { + if ((paddr & ~PAGE_MASK) || paddr < sdram_start || + paddr + size > sdram_start + sdram_size) { + pr_err("Illegal SDRAM region for VRAM\n"); + return; + } + + if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) { + pr_err("FB: failed to reserve VRAM\n"); + return; + } + } else { + if (size > sdram_size) { + pr_err("Illegal SDRAM size for VRAM\n"); + return; + } + + paddr = virt_to_phys(alloc_bootmem_pages(size)); + BUG_ON(paddr & ~PAGE_MASK); + } + + omap_vram_add_region(paddr, size); + + pr_info("Reserving %u bytes SDRAM for VRAM\n", size); +} + +/* + * Called at sram init time, before anything is pushed to the SRAM stack. + * Because of the stack scheme, we will allocate everything from the + * start of the lowest address region to the end of SRAM. This will also + * include padding for page alignment and possible holes between regions. + * + * As opposed to the SDRAM case, we'll also do any dynamic allocations at + * this point, since the driver built as a module would have problem with + * freeing / reallocating the regions. + */ +unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail) +{ + unsigned long pend_avail; + unsigned long reserved; + u32 paddr; + u32 size; + + paddr = omap_vram_sram_start; + size = omap_vram_sram_size; + + if (!size) + return 0; + + reserved = 0; + pend_avail = pstart_avail + size_avail; + + if (!paddr) { + /* Dynamic allocation */ + if ((size_avail & PAGE_MASK) < size) { + pr_err("Not enough SRAM for VRAM\n"); + return 0; + } + size_avail = (size_avail - size) & PAGE_MASK; + paddr = pstart_avail + size_avail; + } + + if (paddr < sram_pstart || + paddr + size > sram_pstart + sram_size) { + pr_err("Illegal SRAM region for VRAM\n"); + return 0; + } + + /* Reserve everything above the start of the region. */ + if (pend_avail - paddr > reserved) + reserved = pend_avail - paddr; + size_avail = pend_avail - reserved - pstart_avail; + + omap_vram_add_region(paddr, size); + + if (reserved) + pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); + + return reserved; +} + +void __init omap_vram_set_sdram_vram(u32 size, u32 start) +{ + omap_vram_sdram_start = start; + omap_vram_sdram_size = size; +} + +void __init omap_vram_set_sram_vram(u32 size, u32 start) +{ + omap_vram_sram_start = start; + omap_vram_sram_size = size; +} diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c new file mode 100644 index 00000000000..fd227160037 --- /dev/null +++ b/drivers/video/omap2/vrfb.c @@ -0,0 +1,315 @@ +/* + * VRFB Rotation Engine + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/mutex.h> + +#include <mach/io.h> +#include <plat/vrfb.h> +#include <plat/sdrc.h> + +#ifdef DEBUG +#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__) +#else +#define DBG(format, ...) +#endif + +#define SMS_ROT_VIRT_BASE(context, rot) \ + (((context >= 4) ? 0xD0000000 : 0x70000000) \ + + (0x4000000 * (context)) \ + + (0x1000000 * (rot))) + +#define OMAP_VRFB_SIZE (2048 * 2048 * 4) + +#define VRFB_PAGE_WIDTH_EXP 5 /* Assuming SDRAM pagesize= 1024 */ +#define VRFB_PAGE_HEIGHT_EXP 5 /* 1024 = 2^5 * 2^5 */ +#define VRFB_PAGE_WIDTH (1 << VRFB_PAGE_WIDTH_EXP) +#define VRFB_PAGE_HEIGHT (1 << VRFB_PAGE_HEIGHT_EXP) +#define SMS_IMAGEHEIGHT_OFFSET 16 +#define SMS_IMAGEWIDTH_OFFSET 0 +#define SMS_PH_OFFSET 8 +#define SMS_PW_OFFSET 4 +#define SMS_PS_OFFSET 0 + +#define VRFB_NUM_CTXS 12 +/* bitmap of reserved contexts */ +static unsigned long ctx_map; + +static DEFINE_MUTEX(ctx_lock); + +/* + * Access to this happens from client drivers or the PM core after wake-up. + * For the first case we require locking at the driver level, for the second + * we don't need locking, since no drivers will run until after the wake-up + * has finished. + */ +static struct { + u32 physical_ba; + u32 control; + u32 size; +} vrfb_hw_context[VRFB_NUM_CTXS]; + +static inline void restore_hw_context(int ctx) +{ + omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx); + omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx); + omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx); +} + +static u32 get_image_width_roundup(u16 width, u8 bytespp) +{ + unsigned long stride = width * bytespp; + unsigned long ceil_pages_per_stride = (stride / VRFB_PAGE_WIDTH) + + (stride % VRFB_PAGE_WIDTH != 0); + + return ceil_pages_per_stride * VRFB_PAGE_WIDTH / bytespp; +} + +/* + * This the extra space needed in the VRFB physical area for VRFB to safely wrap + * any memory accesses to the invisible part of the virtual view to the physical + * area. + */ +static inline u32 get_extra_physical_size(u16 image_width_roundup, u8 bytespp) +{ + return (OMAP_VRFB_LINE_LEN - image_width_roundup) * VRFB_PAGE_HEIGHT * + bytespp; +} + +void omap_vrfb_restore_context(void) +{ + int i; + unsigned long map = ctx_map; + + for (i = ffs(map); i; i = ffs(map)) { + /* i=1..32 */ + i--; + map &= ~(1 << i); + restore_hw_context(i); + } +} + +void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp) +{ + *width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp; + *height = ALIGN(*height, VRFB_PAGE_HEIGHT); +} +EXPORT_SYMBOL(omap_vrfb_adjust_size); + +u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp) +{ + unsigned long image_width_roundup = get_image_width_roundup(width, + bytespp); + + if (image_width_roundup > OMAP_VRFB_LINE_LEN) + return 0; + + return (width * height * bytespp) + get_extra_physical_size( + image_width_roundup, bytespp); +} +EXPORT_SYMBOL(omap_vrfb_min_phys_size); + +u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp) +{ + unsigned long image_width_roundup = get_image_width_roundup(width, + bytespp); + unsigned long height; + unsigned long extra; + + if (image_width_roundup > OMAP_VRFB_LINE_LEN) + return 0; + + extra = get_extra_physical_size(image_width_roundup, bytespp); + + if (phys_size < extra) + return 0; + + height = (phys_size - extra) / (width * bytespp); + + /* Virtual views provided by VRFB are limited to 2048x2048. */ + return min_t(unsigned long, height, 2048); +} +EXPORT_SYMBOL(omap_vrfb_max_height); + +void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, + unsigned bytespp, bool yuv_mode) +{ + unsigned pixel_size_exp; + u16 vrfb_width; + u16 vrfb_height; + u8 ctx = vrfb->context; + u32 size; + u32 control; + + DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d, %d)\n", ctx, paddr, + width, height, bytespp, yuv_mode); + + /* For YUV2 and UYVY modes VRFB needs to handle pixels a bit + * differently. See TRM. */ + if (yuv_mode) { + bytespp *= 2; + width /= 2; + } + + if (bytespp == 4) + pixel_size_exp = 2; + else if (bytespp == 2) + pixel_size_exp = 1; + else + BUG(); + + vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp; + vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT); + + DBG("vrfb w %u, h %u bytespp %d\n", vrfb_width, vrfb_height, bytespp); + + size = vrfb_width << SMS_IMAGEWIDTH_OFFSET; + size |= vrfb_height << SMS_IMAGEHEIGHT_OFFSET; + + control = pixel_size_exp << SMS_PS_OFFSET; + control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET; + control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET; + + vrfb_hw_context[ctx].physical_ba = paddr; + vrfb_hw_context[ctx].size = size; + vrfb_hw_context[ctx].control = control; + + omap2_sms_write_rot_physical_ba(paddr, ctx); + omap2_sms_write_rot_size(size, ctx); + omap2_sms_write_rot_control(control, ctx); + + DBG("vrfb offset pixels %d, %d\n", + vrfb_width - width, vrfb_height - height); + + vrfb->xres = width; + vrfb->yres = height; + vrfb->xoffset = vrfb_width - width; + vrfb->yoffset = vrfb_height - height; + vrfb->bytespp = bytespp; + vrfb->yuv_mode = yuv_mode; +} +EXPORT_SYMBOL(omap_vrfb_setup); + +int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot) +{ + unsigned long size = height * OMAP_VRFB_LINE_LEN * vrfb->bytespp; + + vrfb->vaddr[rot] = ioremap_wc(vrfb->paddr[rot], size); + + if (!vrfb->vaddr[rot]) { + printk(KERN_ERR "vrfb: ioremap failed\n"); + return -ENOMEM; + } + + DBG("ioremapped vrfb area %d of size %lu into %p\n", rot, size, + vrfb->vaddr[rot]); + + return 0; +} +EXPORT_SYMBOL(omap_vrfb_map_angle); + +void omap_vrfb_release_ctx(struct vrfb *vrfb) +{ + int rot; + int ctx = vrfb->context; + + if (ctx == 0xff) + return; + + DBG("release ctx %d\n", ctx); + + mutex_lock(&ctx_lock); + + BUG_ON(!(ctx_map & (1 << ctx))); + + clear_bit(ctx, &ctx_map); + + for (rot = 0; rot < 4; ++rot) { + if (vrfb->paddr[rot]) { + release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE); + vrfb->paddr[rot] = 0; + } + } + + vrfb->context = 0xff; + + mutex_unlock(&ctx_lock); +} +EXPORT_SYMBOL(omap_vrfb_release_ctx); + +int omap_vrfb_request_ctx(struct vrfb *vrfb) +{ + int rot; + u32 paddr; + u8 ctx; + int r; + + DBG("request ctx\n"); + + mutex_lock(&ctx_lock); + + for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx) + if ((ctx_map & (1 << ctx)) == 0) + break; + + if (ctx == VRFB_NUM_CTXS) { + pr_err("vrfb: no free contexts\n"); + r = -EBUSY; + goto out; + } + + DBG("found free ctx %d\n", ctx); + + set_bit(ctx, &ctx_map); + + memset(vrfb, 0, sizeof(*vrfb)); + + vrfb->context = ctx; + + for (rot = 0; rot < 4; ++rot) { + paddr = SMS_ROT_VIRT_BASE(ctx, rot); + if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) { + pr_err("vrfb: failed to reserve VRFB " + "area for ctx %d, rotation %d\n", + ctx, rot * 90); + omap_vrfb_release_ctx(vrfb); + r = -ENOMEM; + goto out; + } + + vrfb->paddr[rot] = paddr; + + DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]); + } + + r = 0; +out: + mutex_unlock(&ctx_lock); + return r; +} +EXPORT_SYMBOL(omap_vrfb_request_ctx); diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c index bba53714a7b..f86012239bf 100644 --- a/drivers/video/sgivwfb.c +++ b/drivers/video/sgivwfb.c @@ -260,13 +260,13 @@ static int sgivwfb_check_var(struct fb_var_screeninfo *var, var->grayscale = 0; /* No grayscale for now */ /* determine valid resolution and timing */ - for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) { + for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) { if (dbeVTimings[min_mode].width >= var->xres && dbeVTimings[min_mode].height >= var->yres) break; } - if (min_mode == DBE_VT_SIZE) + if (min_mode == ARRAY_SIZE(dbeVTimings)) return -EINVAL; /* Resolution to high */ /* XXX FIXME - should try to pick best refresh rate */ diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 3ad5157f989..b4b5de930cf 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -281,18 +281,34 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info, struct list_head *pagelist) { struct sh_mobile_lcdc_chan *ch = info->par; - unsigned int nr_pages; /* enable clocks before accessing hardware */ sh_mobile_lcdc_clk_on(ch->lcdc); - nr_pages = sh_mobile_lcdc_sginit(info, pagelist); - dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); - - /* trigger panel update */ - lcdc_write_chan(ch, LDSM2R, 1); - - dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + /* + * It's possible to get here without anything on the pagelist via + * sh_mobile_lcdc_deferred_io_touch() or via a userspace fsync() + * invocation. In the former case, the acceleration routines are + * stepped in to when using the framebuffer console causing the + * workqueue to be scheduled without any dirty pages on the list. + * + * Despite this, a panel update is still needed given that the + * acceleration routines have their own methods for writing in + * that still need to be updated. + * + * The fsync() and empty pagelist case could be optimized for, + * but we don't bother, as any application exhibiting such + * behaviour is fundamentally broken anyways. + */ + if (!list_empty(pagelist)) { + unsigned int nr_pages = sh_mobile_lcdc_sginit(info, pagelist); + + /* trigger panel update */ + dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + lcdc_write_chan(ch, LDSM2R, 1); + dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE); + } else + lcdc_write_chan(ch, LDSM2R, 1); } static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info) diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index 6120f0c526f..876648e15e9 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -756,9 +756,9 @@ hyperResetPlanes(struct stifb_info *fb, int enable) if (fb->info.var.bits_per_pixel == 32) controlPlaneReg = 0x04000F00; else - controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */ else - controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */ + controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */ switch (enable) { case ENABLE: diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index ff43c888502..98054839004 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -52,7 +52,7 @@ * * 0.1.3 (released 1999-11-02) added Attila's panning support, code * reorg, hwcursor address page size alignment - * (for mmaping both frame buffer and regs), + * (for mmapping both frame buffer and regs), * and my changes to get rid of hardcoded * VGA i/o register locations (uses PCI * configuration info now) diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c index c5c32b6b6e6..67b36932212 100644 --- a/drivers/video/via/dvi.c +++ b/drivers/video/via/dvi.c @@ -467,7 +467,7 @@ static int dvi_get_panel_size_from_DDCv1(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\ set default panel size.\n", max_h); break; } @@ -534,7 +534,7 @@ static int dvi_get_panel_size_from_DDCv2(void) default: viaparinfo->tmds_setting_info->dvi_panel_size = VIA_RES_1024X768; - DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\ + DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\ set default panel size.\n", HSize); break; } diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 3df17dc8c3d..65ccd215d49 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -446,7 +446,7 @@ static int vt8623fb_set_par(struct fb_info *info) svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus - svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold + svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold vga_wseq(NULL, 0x17, 0x1F); // FIFO depth vga_wseq(NULL, 0x18, 0x4E); svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ? diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 54cd9161017..603598f4dbb 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -25,7 +25,10 @@ #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/mm.h> + #include <asm/xen/hypervisor.h> + +#include <xen/xen.h> #include <xen/events.h> #include <xen/page.h> #include <xen/interface/io/fbif.h> @@ -440,7 +443,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->fix.type = FB_TYPE_PACKED_PIXELS; fb_info->fix.accel = FB_ACCEL_NONE; - fb_info->flags = FBINFO_FLAG_DEFAULT; + fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; ret = fb_alloc_cmap(&fb_info->cmap, 256, 0); if (ret < 0) { |