aboutsummaryrefslogtreecommitdiff
path: root/drivers/video
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/Kconfig12
-rw-r--r--drivers/video/Makefile5
-rw-r--r--drivers/video/amifb.c6
-rw-r--r--drivers/video/atafb.c112
-rw-r--r--drivers/video/bf54x-lq043fb.c15
-rw-r--r--drivers/video/bfin-t350mcqb-fb.c15
-rw-r--r--drivers/video/c2p.c232
-rw-r--r--drivers/video/c2p.h11
-rw-r--r--drivers/video/c2p_core.h153
-rw-r--r--drivers/video/c2p_iplan2.c153
-rw-r--r--drivers/video/c2p_planar.c156
-rw-r--r--drivers/video/console/fbcon.c38
-rw-r--r--drivers/video/mx3fb.c1555
-rw-r--r--drivers/video/ps3fb.c4
14 files changed, 2120 insertions, 347 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6372f8b17b4..c94f71980c1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2123,6 +2123,18 @@ config FB_PRE_INIT_FB
Select this option if display contents should be inherited as set by
the bootloader.
+config FB_MX3
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index e39e33e797d..2a998ca6181 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_FB_DDC) += fb_ddc.o
obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
# Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
+obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
@@ -72,7 +72,7 @@ obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
obj-$(CONFIG_FB_ACORN) += acornfb.o
-obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \
+obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
obj-$(CONFIG_FB_MAC) += macfb.o
obj-$(CONFIG_FB_HECUBA) += hecubafb.o
@@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3) += mx3fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index b8e9a8682f2..100f2366146 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -2159,9 +2159,9 @@ static void amifb_imageblit(struct fb_info *info, const struct fb_image *image)
src += pitch;
}
} else {
- c2p(info->screen_base, image->data, dx, dy, width, height,
- par->next_line, par->next_plane, image->width,
- info->var.bits_per_pixel);
+ c2p_planar(info->screen_base, image->data, dx, dy, width,
+ height, par->next_line, par->next_plane,
+ image->width, info->var.bits_per_pixel);
}
}
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 77eb8b34fbf..8058572a742 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -122,7 +122,6 @@ static struct atafb_par {
void *screen_base;
int yres_virtual;
u_long next_line;
- u_long next_plane;
#if defined ATAFB_TT || defined ATAFB_STE
union {
struct {
@@ -149,6 +148,7 @@ static struct atafb_par {
short mono;
short ste_mode;
short bpp;
+ u32 pseudo_palette[16];
} falcon;
#endif
/* Nothing needed for external mode */
@@ -614,7 +614,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
fix->xpanstep = 0;
fix->ypanstep = 1;
fix->ywrapstep = 0;
- fix->line_length = 0;
+ fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
@@ -691,6 +691,7 @@ static int tt_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
return -EINVAL;
par->yres_virtual = yres_virtual;
par->screen_base = screen_base + var->yoffset * linelen;
+ par->next_line = linelen;
return 0;
}
@@ -884,10 +885,6 @@ static int vdl_prescale[4][3] = {
/* Default hsync timing [mon_type] in picoseconds */
static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
-#ifdef FBCON_HAS_CFB16
-static u16 fbcon_cfb16_cmap[16];
-#endif
-
static inline int hxx_prescale(struct falcon_hw *hw)
{
return hw->ste_mode ? 16
@@ -918,7 +915,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
fix->visual = FB_VISUAL_TRUECOLOR;
fix->xpanstep = 2;
}
- fix->line_length = 0;
+ fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
@@ -1394,14 +1391,7 @@ set_screen_base:
par->screen_base = screen_base + var->yoffset * linelen;
par->hw.falcon.xoffset = 0;
- // FIXME!!! sort of works, no crash
- //par->next_line = linelen;
- //par->next_plane = yres_virtual * linelen;
par->next_line = linelen;
- par->next_plane = 2;
- // crashes
- //par->next_plane = linelen;
- //par->next_line = yres_virtual * linelen;
return 0;
}
@@ -1735,10 +1725,10 @@ static int falcon_setcolreg(unsigned int regno, unsigned int red,
(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
-#ifdef FBCON_HAS_CFB16
- fbcon_cfb16_cmap[regno] = ((red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11));
+#ifdef ATAFB_FALCON
+ ((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11));
#endif
}
return 0;
@@ -1852,7 +1842,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix,
fix->ypanstep = 0;
}
fix->ywrapstep = 0;
- fix->line_length = 0;
+ fix->line_length = par->next_line;
fix->accel = FB_ACCEL_ATARIBLITT;
return 0;
}
@@ -1910,6 +1900,7 @@ static int stste_decode_var(struct fb_var_screeninfo *var,
return -EINVAL;
par->yres_virtual = yres_virtual;
par->screen_base = screen_base + var->yoffset * linelen;
+ par->next_line = linelen;
return 0;
}
@@ -2169,7 +2160,7 @@ static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
fix->xpanstep = 0;
fix->ypanstep = 0;
fix->ywrapstep = 0;
- fix->line_length = 0;
+ fix->line_length = par->next_line;
return 0;
}
@@ -2184,6 +2175,8 @@ static int ext_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
var->xoffset > 0 ||
var->yoffset > 0)
return -EINVAL;
+
+ par->next_line = external_xres_virtual * external_depth / 8;
return 0;
}
@@ -2443,42 +2436,6 @@ static void atafb_set_disp(struct fb_info *info)
atafb_get_fix(&info->fix, info);
info->screen_base = (void *)info->fix.smem_start;
-
- switch (info->fix.type) {
- case FB_TYPE_INTERLEAVED_PLANES:
- switch (info->var.bits_per_pixel) {
- case 2:
- // display->dispsw = &fbcon_iplan2p2;
- break;
- case 4:
- // display->dispsw = &fbcon_iplan2p4;
- break;
- case 8:
- // display->dispsw = &fbcon_iplan2p8;
- break;
- }
- break;
- case FB_TYPE_PACKED_PIXELS:
- switch (info->var.bits_per_pixel) {
-#ifdef FBCON_HAS_MFB
- case 1:
- // display->dispsw = &fbcon_mfb;
- break;
-#endif
-#ifdef FBCON_HAS_CFB8
- case 8:
- // display->dispsw = &fbcon_cfb8;
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- // display->dispsw = &fbcon_cfb16;
- // display->dispsw_data = fbcon_cfb16_cmap;
- break;
-#endif
- }
- break;
- }
}
static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2549,6 +2506,13 @@ static void atafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
if (!rect->width || !rect->height)
return;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly.
@@ -2583,6 +2547,13 @@ static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
u32 dx, dy, sx, sy, width, height;
int rev_copy = 0;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_copyarea(info, area);
+ return;
+ }
+#endif
+
/* clip the destination */
x2 = area->dx + area->width;
y2 = area->dy + area->height;
@@ -2632,6 +2603,13 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
const char *src;
u32 dx, dy, width, height, pitch;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_imageblit(info, image);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly like we are
@@ -2676,10 +2654,9 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
src += pitch;
}
} else {
- // only used for logo; broken
- c2p(info->screen_base, image->data, dx, dy, width, height,
- par->next_line, par->next_plane, image->width,
- info->var.bits_per_pixel);
+ c2p_iplan2(info->screen_base, image->data, dx, dy, width,
+ height, par->next_line, image->width,
+ info->var.bits_per_pixel);
}
}
@@ -3098,8 +3075,7 @@ int __init atafb_setup(char *options)
int __init atafb_init(void)
{
- int pad;
- int detected_mode;
+ int pad, detected_mode, error;
unsigned int defmode = 0;
unsigned long mem_req;
@@ -3139,8 +3115,12 @@ int __init atafb_init(void)
printk("atafb_init: initializing Falcon hw\n");
fbhw = &falcon_switch;
atafb_ops.fb_setcolreg = &falcon_setcolreg;
- request_irq(IRQ_AUTO_4, falcon_vbl_switcher, IRQ_TYPE_PRIO,
- "framebuffer/modeswitch", falcon_vbl_switcher);
+ error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
+ IRQ_TYPE_PRIO,
+ "framebuffer/modeswitch",
+ falcon_vbl_switcher);
+ if (error)
+ return error;
defmode = DEFMODE_F30;
break;
}
@@ -3225,6 +3205,10 @@ int __init atafb_init(void)
// tries to read from HW which may not be initialized yet
// so set sane var first, then call atafb_set_par
atafb_get_var(&fb_info.var, &fb_info);
+
+#ifdef ATAFB_FALCON
+ fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
+#endif
fb_info.flags = FBINFO_FLAG_DEFAULT;
if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 7644ed24956..37e60b1d2ed 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -335,7 +335,20 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- if (var->bits_per_pixel != LCD_BPP) {
+ switch (var->bits_per_pixel) {
+ case 24:/* TRUECOLOUR, 16m */
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ break;
+ default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a9b3ada05d9..2a423d3a2a8 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -254,7 +254,20 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- if (var->bits_per_pixel != LCD_BPP) {
+ switch (var->bits_per_pixel) {
+ case 24:/* TRUECOLOUR, 16m */
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ break;
+ default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c
deleted file mode 100644
index 376bc07ff95..00000000000
--- a/drivers/video/c2p.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Fast C2P (Chunky-to-Planar) Conversion
- *
- * Copyright (C) 2003 Geert Uytterhoeven
- *
- * NOTES:
- * - This code was inspired by Scout's C2P tutorial
- * - It assumes to run on a big endian system
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include "c2p.h"
-
-
- /*
- * Basic transpose step
- */
-
-#define _transp(d, i1, i2, shift, mask) \
- do { \
- u32 t = (d[i1] ^ (d[i2] >> shift)) & mask; \
- d[i1] ^= t; \
- d[i2] ^= t << shift; \
- } while (0)
-
-static inline u32 get_mask(int n)
-{
- switch (n) {
- case 1:
- return 0x55555555;
- break;
-
- case 2:
- return 0x33333333;
- break;
-
- case 4:
- return 0x0f0f0f0f;
- break;
-
- case 8:
- return 0x00ff00ff;
- break;
-
- case 16:
- return 0x0000ffff;
- break;
- }
- return 0;
-}
-
-#define transp_nx1(d, n) \
- do { \
- u32 mask = get_mask(n); \
- /* First block */ \
- _transp(d, 0, 1, n, mask); \
- /* Second block */ \
- _transp(d, 2, 3, n, mask); \
- /* Third block */ \
- _transp(d, 4, 5, n, mask); \
- /* Fourth block */ \
- _transp(d, 6, 7, n, mask); \
- } while (0)
-
-#define transp_nx2(d, n) \
- do { \
- u32 mask = get_mask(n); \
- /* First block */ \
- _transp(d, 0, 2, n, mask); \
- _transp(d, 1, 3, n, mask); \
- /* Second block */ \
- _transp(d, 4, 6, n, mask); \
- _transp(d, 5, 7, n, mask); \
- } while (0)
-
-#define transp_nx4(d, n) \
- do { \
- u32 mask = get_mask(n); \
- _transp(d, 0, 4, n, mask); \
- _transp(d, 1, 5, n, mask); \
- _transp(d, 2, 6, n, mask); \
- _transp(d, 3, 7, n, mask); \
- } while (0)
-
-#define transp(d, n, m) transp_nx ## m(d, n)
-
-
- /*
- * Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words
- * containing
- * - 32 8-bit chunky pixels on input
- * - permuted planar data on output
- */
-
-static void c2p_8bpp(u32 d[8])
-{
- transp(d, 16, 4);
- transp(d, 8, 2);
- transp(d, 4, 1);
- transp(d, 2, 4);
- transp(d, 1, 2);
-}
-
-
- /*
- * Array containing the permution indices of the planar data after c2p
- */
-
-static const int perm_c2p_8bpp[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
-
-
- /*
- * Compose two values, using a bitmask as decision value
- * This is equivalent to (a & mask) | (b & ~mask)
- */
-
-static inline unsigned long comp(unsigned long a, unsigned long b,
- unsigned long mask)
-{
- return ((a ^ b) & mask) ^ b;
-}
-
-
- /*
- * Store a full block of planar data after c2p conversion
- */
-
-static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
-{
- int i;
-
- for (i = 0; i < bpp; i++, dst += dst_inc)
- *(u32 *)dst = d[perm_c2p_8bpp[i]];
-}
-
-
- /*
- * Store a partial block of planar data after c2p conversion
- */
-
-static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
- u32 d[8], u32 mask)
-{
- int i;
-
- for (i = 0; i < bpp; i++, dst += dst_inc)
- *(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask);
-}
-
-
- /*
- * c2p - Copy 8-bit chunky image data to a planar frame buffer
- * @dst: Starting address of the planar frame buffer
- * @dx: Horizontal destination offset (in pixels)
- * @dy: Vertical destination offset (in pixels)
- * @width: Image width (in pixels)
- * @height: Image height (in pixels)
- * @dst_nextline: Frame buffer offset to the next line (in bytes)
- * @dst_nextplane: Frame buffer offset to the next plane (in bytes)
- * @src_nextline: Image offset to the next line (in bytes)
- * @bpp: Bits per pixel of the planar frame buffer (1-8)
- */
-
-void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
- u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp)
-{
- int dst_idx;
- u32 d[8], first, last, w;
- const u8 *c;
- u8 *p;
-
- dst += dy*dst_nextline+(dx & ~31);
- dst_idx = dx % 32;
- first = ~0UL >> dst_idx;
- last = ~(~0UL >> ((dst_idx+width) % 32));
- while (height--) {
- c = src;
- p = dst;
- w = width;
- if (dst_idx+width <= 32) {
- /* Single destination word */
- first &= last;
- memset(d, 0, sizeof(d));
- memcpy((u8 *)d+dst_idx, c, width);
- c += width;
- c2p_8bpp(d);
- store_planar_masked(p, dst_nextplane, bpp, d, first);
- p += 4;
- } else {
- /* Multiple destination words */
- w = width;
- /* Leading bits */
- if (dst_idx) {
- w = 32 - dst_idx;
- memset(d, 0, dst_idx);
- memcpy((u8 *)d+dst_idx, c, w);
- c += w;
- c2p_8bpp(d);
- store_planar_masked(p, dst_nextplane, bpp, d, first);
- p += 4;
- w = width-w;
- }
- /* Main chunk */
- while (w >= 32) {
- memcpy(d, c, 32);
- c += 32;
- c2p_8bpp(d);
- store_planar(p, dst_nextplane, bpp, d);
- p += 4;
- w -= 32;
- }
- /* Trailing bits */
- w %= 32;
- if (w > 0) {
- memcpy(d, c, w);
- memset((u8 *)d+w, 0, 32-w);
- c2p_8bpp(d);
- store_planar_masked(p, dst_nextplane, bpp, d, last);
- }
- }
- src += src_nextline;
- dst += dst_nextline;
- }
-}
-EXPORT_SYMBOL_GPL(c2p);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h
index c77cbf17e04..6c38d40427d 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/c2p.h
@@ -1,7 +1,7 @@
/*
* Fast C2P (Chunky-to-Planar) Conversion
*
- * Copyright (C) 2003 Geert Uytterhoeven
+ * Copyright (C) 2003-2008 Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
@@ -10,7 +10,10 @@
#include <linux/types.h>
-extern void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
- u32 dst_nextline, u32 dst_nextplane, u32 src_nextline,
- u32 bpp);
+extern void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+ u32 height, u32 dst_nextline, u32 dst_nextplane,
+ u32 src_nextline, u32 bpp);
+extern void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+ u32 height, u32 dst_nextline, u32 src_nextline,
+ u32 bpp);
diff --git a/drivers/video/c2p_core.h b/drivers/video/c2p_core.h
new file mode 100644
index 00000000000..e1035a865fb
--- /dev/null
+++ b/drivers/video/c2p_core.h
@@ -0,0 +1,153 @@
+/*
+ * Fast C2P (Chunky-to-Planar) Conversion
+ *
+ * Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ * NOTES:
+ * - This code was inspired by Scout's C2P tutorial
+ * - It assumes to run on a big endian system
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+
+ /*
+ * Basic transpose step
+ */
+
+static inline void _transp(u32 d[], unsigned int i1, unsigned int i2,
+ unsigned int shift, u32 mask)
+{
+ u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;
+
+ d[i1] ^= t;
+ d[i2] ^= t << shift;
+}
+
+
+extern void c2p_unsupported(void);
+
+static inline u32 get_mask(unsigned int n)
+{
+ switch (n) {
+ case 1:
+ return 0x55555555;
+
+ case 2:
+ return 0x33333333;
+
+ case 4:
+ return 0x0f0f0f0f;
+
+ case 8:
+ return 0x00ff00ff;
+
+ case 16:
+ return 0x0000ffff;
+ }
+
+ c2p_unsupported();
+ return 0;
+}
+
+
+ /*
+ * Transpose operations on 8 32-bit words
+ */
+
+static inline void transp8(u32 d[], unsigned int n, unsigned int m)
+{
+ u32 mask = get_mask(n);
+
+ switch (m) {
+ case 1:
+ /* First n x 1 block */
+ _transp(d, 0, 1, n, mask);
+ /* Second n x 1 block */
+ _transp(d, 2, 3, n, mask);
+ /* Third n x 1 block */
+ _transp(d, 4, 5, n, mask);
+ /* Fourth n x 1 block */
+ _transp(d, 6, 7, n, mask);
+ return;
+
+ case 2:
+ /* First n x 2 block */
+ _transp(d, 0, 2, n, mask);
+ _transp(d, 1, 3, n, mask);
+ /* Second n x 2 block */
+ _transp(d, 4, 6, n, mask);
+ _transp(d, 5, 7, n, mask);
+ return;
+
+ case 4:
+ /* Single n x 4 block */
+ _transp(d, 0, 4, n, mask);
+ _transp(d, 1, 5, n, mask);
+ _transp(d, 2, 6, n, mask);
+ _transp(d, 3, 7, n, mask);
+ return;
+ }
+
+ c2p_unsupported();
+}
+
+
+ /*
+ * Transpose operations on 4 32-bit words
+ */
+
+static inline void transp4(u32 d[], unsigned int n, unsigned int m)
+{
+ u32 mask = get_mask(n);
+
+ switch (m) {
+ case 1:
+ /* First n x 1 block */
+ _transp(d, 0, 1, n, mask);
+ /* Second n x 1 block */
+ _transp(d, 2, 3, n, mask);
+ return;
+
+ case 2:
+ /* Single n x 2 block */
+ _transp(d, 0, 2, n, mask);
+ _transp(d, 1, 3, n, mask);
+ return;
+ }
+
+ c2p_unsupported();
+}
+
+
+ /*
+ * Transpose operations on 4 32-bit words (reverse order)
+ */
+
+static inline void transp4x(u32 d[], unsigned int n, unsigned int m)
+{
+ u32 mask = get_mask(n);
+
+ switch (m) {
+ case 2:
+ /* Single n x 2 block */
+ _transp(d, 2, 0, n, mask);
+ _transp(d, 3, 1, n, mask);
+ return;
+ }
+
+ c2p_unsupported();
+}
+
+
+ /*
+ * Compose two values, using a bitmask as decision value
+ * This is equivalent to (a & mask) | (b & ~mask)
+ */
+
+static inline u32 comp(u32 a, u32 b, u32 mask)
+{
+ return ((a ^ b) & mask) ^ b;
+}
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/c2p_iplan2.c
new file mode 100644
index 00000000000..19156dc6158
--- /dev/null
+++ b/drivers/video/c2p_iplan2.c
@@ -0,0 +1,153 @@
+/*
+ * Fast C2P (Chunky-to-Planar) Conversion
+ *
+ * Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/unaligned.h>
+
+#include "c2p.h"
+#include "c2p_core.h"
+
+
+ /*
+ * Perform a full C2P step on 16 8-bit pixels, stored in 4 32-bit words
+ * containing
+ * - 16 8-bit chunky pixels on input
+ * - permutated planar data (2 planes per 32-bit word) on output
+ */
+
+static void c2p_16x8(u32 d[4])
+{
+ transp4(d, 8, 2);
+ transp4(d, 1, 2);
+ transp4x(d, 16, 2);
+ transp4x(d, 2, 2);
+ transp4(d, 4, 1);
+}
+
+
+ /*
+ * Array containing the permutation indices of the planar data after c2p
+ */
+
+static const int perm_c2p_16x8[4] = { 1, 3, 0, 2 };
+
+
+ /*
+ * Store a full block of iplan2 data after c2p conversion
+ */
+
+static inline void store_iplan2(void *dst, u32 bpp, u32 d[4])
+{
+ int i;
+
+ for (i = 0; i < bpp/2; i++, dst += 4)
+ put_unaligned_be32(d[perm_c2p_16x8[i]], dst);
+}
+
+
+ /*
+ * Store a partial block of iplan2 data after c2p conversion
+ */
+
+static inline void store_iplan2_masked(void *dst, u32 bpp, u32 d[4], u32 mask)
+{
+ int i;
+
+ for (i = 0; i < bpp/2; i++, dst += 4)
+ put_unaligned_be32(comp(d[perm_c2p_16x8[i]],
+ get_unaligned_be32(dst), mask),
+ dst);
+}
+
+
+ /*
+ * c2p_iplan2 - Copy 8-bit chunky image data to an interleaved planar
+ * frame buffer with 2 bytes of interleave
+ * @dst: Starting address of the planar frame buffer
+ * @dx: Horizontal destination offset (in pixels)
+ * @dy: Vertical destination offset (in pixels)
+ * @width: Image width (in pixels)
+ * @height: Image height (in pixels)
+ * @dst_nextline: Frame buffer offset to the next line (in bytes)
+ * @src_nextline: Image offset to the next line (in bytes)
+ * @bpp: Bits per pixel of the planar frame buffer (2, 4, or 8)
+ */
+
+void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+ u32 height, u32 dst_nextline, u32 src_nextline, u32 bpp)
+{
+ union {
+ u8 pixels[16];
+ u32 words[4];
+ } d;
+ u32 dst_idx, first, last, w;
+ const u8 *c;
+ void *p;
+
+ dst += dy*dst_nextline+(dx & ~15)*bpp;
+ dst_idx = dx % 16;
+ first = 0xffffU >> dst_idx;
+ first |= first << 16;
+ last = 0xffffU ^ (0xffffU >> ((dst_idx+width) % 16));
+ last |= last << 16;
+ while (height--) {
+ c = src;
+ p = dst;
+ w = width;
+ if (dst_idx+width <= 16) {
+ /* Single destination word */
+ first &= last;
+ memset(d.pixels, 0, sizeof(d));
+ memcpy(d.pixels+dst_idx, c, width);
+ c += width;
+ c2p_16x8(d.words);
+ store_iplan2_masked(p, bpp, d.words, first);
+ p += bpp*2;
+ } else {
+ /* Multiple destination words */
+ w = width;
+ /* Leading bits */
+ if (dst_idx) {
+ w = 16 - dst_idx;
+ memset(d.pixels, 0, dst_idx);
+ memcpy(d.pixels+dst_idx, c, w);
+ c += w;
+ c2p_16x8(d.words);
+ store_iplan2_masked(p, bpp, d.words, first);
+ p += bpp*2;
+ w = width-w;
+ }
+ /* Main chunk */
+ while (w >= 16) {
+ memcpy(d.pixels, c, 16);
+ c += 16;
+ c2p_16x8(d.words);
+ store_iplan2(p, bpp, d.words);
+ p += bpp*2;
+ w -= 16;
+ }
+ /* Trailing bits */
+ w %= 16;
+ if (w > 0) {
+ memcpy(d.pixels, c, w);
+ memset(d.pixels+w, 0, 16-w);
+ c2p_16x8(d.words);
+ store_iplan2_masked(p, bpp, d.words, last);
+ }
+ }
+ src += src_nextline;
+ dst += dst_nextline;
+ }
+}
+EXPORT_SYMBOL_GPL(c2p_iplan2);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/c2p_planar.c b/drivers/video/c2p_planar.c
new file mode 100644
index 00000000000..ec7ac8526f0
--- /dev/null
+++ b/drivers/video/c2p_planar.c
@@ -0,0 +1,156 @@
+/*
+ * Fast C2P (Chunky-to-Planar) Conversion
+ *
+ * Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/unaligned.h>
+
+#include "c2p.h"
+#include "c2p_core.h"
+
+
+ /*
+ * Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words
+ * containing
+ * - 32 8-bit chunky pixels on input
+ * - permutated planar data (1 plane per 32-bit word) on output
+ */
+
+static void c2p_32x8(u32 d[8])
+{
+ transp8(d, 16, 4);
+ transp8(d, 8, 2);
+ transp8(d, 4, 1);
+ transp8(d, 2, 4);
+ transp8(d, 1, 2);
+}
+
+
+ /*
+ * Array containing the permutation indices of the planar data after c2p
+ */
+
+static const int perm_c2p_32x8[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
+
+
+ /*
+ * Store a full block of planar data after c2p conversion
+ */
+
+static inline void store_planar(void *dst, u32 dst_inc, u32 bpp, u32 d[8])
+{
+ int i;
+
+ for (i = 0; i < bpp; i++, dst += dst_inc)
+ put_unaligned_be32(d[perm_c2p_32x8[i]], dst);
+}
+
+
+ /*
+ * Store a partial block of planar data after c2p conversion
+ */
+
+static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp,
+ u32 d[8], u32 mask)
+{
+ int i;
+
+ for (i = 0; i < bpp; i++, dst += dst_inc)
+ put_unaligned_be32(comp(d[perm_c2p_32x8[i]],
+ get_unaligned_be32(dst), mask),
+ dst);
+}
+
+
+ /*
+ * c2p_planar - Copy 8-bit chunky image data to a planar frame buffer
+ * @dst: Starting address of the planar frame buffer
+ * @dx: Horizontal destination offset (in pixels)
+ * @dy: Vertical destination offset (in pixels)
+ * @width: Image width (in pixels)
+ * @height: Image height (in pixels)
+ * @dst_nextline: Frame buffer offset to the next line (in bytes)
+ * @dst_nextplane: Frame buffer offset to the next plane (in bytes)
+ * @src_nextline: Image offset to the next line (in bytes)
+ * @bpp: Bits per pixel of the planar frame buffer (1-8)
+ */
+
+void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+ u32 height, u32 dst_nextline, u32 dst_nextplane,
+ u32 src_nextline, u32 bpp)
+{
+ union {
+ u8 pixels[32];
+ u32 words[8];
+ } d;
+ u32 dst_idx, first, last, w;
+ const u8 *c;
+ void *p;
+
+ dst += dy*dst_nextline+(dx & ~31);
+ dst_idx = dx % 32;
+ first = 0xffffffffU >> dst_idx;
+ last = ~(0xffffffffU >> ((dst_idx+width) % 32));
+ while (height--) {
+ c = src;
+ p = dst;
+ w = width;
+ if (dst_idx+width <= 32) {
+ /* Single destination word */
+ first &= last;
+ memset(d.pixels, 0, sizeof(d));
+ memcpy(d.pixels+dst_idx, c, width);
+ c += width;
+ c2p_32x8(d.words);
+ store_planar_masked(p, dst_nextplane, bpp, d.words,
+ first);
+ p += 4;
+ } else {
+ /* Multiple destination words */
+ w = width;
+ /* Leading bits */
+ if (dst_idx) {
+ w = 32 - dst_idx;
+ memset(d.pixels, 0, dst_idx);
+ memcpy(d.pixels+dst_idx, c, w);
+ c += w;
+ c2p_32x8(d.words);
+ store_planar_masked(p, dst_nextplane, bpp,
+ d.words, first);
+ p += 4;
+ w = width-w;
+ }
+ /* Main chunk */
+ while (w >= 32) {
+ memcpy(d.pixels, c, 32);
+ c += 32;
+ c2p_32x8(d.words);
+ store_planar(p, dst_nextplane, bpp, d.words);
+ p += 4;
+ w -= 32;
+ }
+ /* Trailing bits */
+ w %= 32;
+ if (w > 0) {
+ memcpy(d.pixels, c, w);
+ memset(d.pixels+w, 0, 32-w);
+ c2p_32x8(d.words);
+ store_planar_masked(p, dst_nextplane, bpp,
+ d.words, last);
+ }
+ }
+ src += src_nextline;
+ dst += dst_nextline;
+ }
+}
+EXPORT_SYMBOL_GPL(c2p_planar);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 4bcff81b50e..1657b9608b0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -78,13 +78,6 @@
#include <asm/fb.h>
#include <asm/irq.h>
#include <asm/system.h>
-#ifdef CONFIG_ATARI
-#include <asm/atariints.h>
-#endif
-#if defined(__mc68000__)
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#endif
#include "fbcon.h"
@@ -155,9 +148,6 @@ static int fbcon_set_origin(struct vc_data *);
#define CURSOR_DRAW_DELAY (1)
-/* # VBL ints between cursor state changes */
-#define ATARI_CURSOR_BLINK_RATE (42)
-
static int vbl_cursor_cnt;
static int fbcon_cursor_noblink;
@@ -403,20 +393,6 @@ static void fb_flashcursor(struct work_struct *work)
release_console_sem();
}
-#ifdef CONFIG_ATARI
-static int cursor_blink_rate;
-static irqreturn_t fb_vbl_handler(int irq, void *dev_id)
-{
- struct fb_info *info = dev_id;
-
- if (vbl_cursor_cnt && --vbl_cursor_cnt == 0) {
- schedule_work(&info->queue);
- vbl_cursor_cnt = cursor_blink_rate;
- }
- return IRQ_HANDLED;
-}
-#endif
-
static void cursor_timer_handler(unsigned long dev_addr)
{
struct fb_info *info = (struct fb_info *) dev_addr;
@@ -1017,15 +993,6 @@ static const char *fbcon_startup(void)
info->var.yres,
info->var.bits_per_pixel);
-#ifdef CONFIG_ATARI
- if (MACH_IS_ATARI) {
- cursor_blink_rate = ATARI_CURSOR_BLINK_RATE;
- (void)request_irq(IRQ_AUTO_4, fb_vbl_handler,
- IRQ_TYPE_PRIO, "framebuffer vbl",
- info);
- }
-#endif /* CONFIG_ATARI */
-
fbcon_add_cursor_timer(info);
fbcon_has_exited = 0;
return display_desc;
@@ -3454,11 +3421,6 @@ static void fbcon_exit(void)
if (fbcon_has_exited)
return;
-#ifdef CONFIG_ATARI
- if (MACH_IS_ATARI)
- free_irq(IRQ_AUTO_4, fb_vbl_handler);
-#endif
-
kfree((void *)softback_buf);
softback_buf = 0UL;
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 00000000000..8a75d05f433
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,1555 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET 0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR 0x00000001UL
+#define SDC_COM_FG_EN 0x00000010UL
+#define SDC_COM_GWSEL 0x00000020UL
+#define SDC_COM_GLB_A 0x00000040UL
+#define SDC_COM_KEY_COLOR_G 0x00000080UL
+#define SDC_COM_BG_EN 0x00000200UL
+#define SDC_COM_SHARP 0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L 0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT 28
+#define DI_D3_HSYNC_POL_SHIFT 27
+#define DI_D3_DRDY_SHARP_POL_SHIFT 26
+#define DI_D3_CLK_POL_SHIFT 25
+#define DI_D3_DATA_POL_SHIFT 24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT 26
+#define DI_D3_CLK_SEL_SHIFT 25
+#define DI_D3_DATAMSK_SHIFT 24
+
+enum ipu_panel {
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+ unsigned datamask_en:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x33 @ 60 Hz */
+ .name = "Sharp-CLI",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 33,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9 + 287,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 640x480 @ 60 Hz */
+ .name = "NEC-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 34,
+ .lower_margin = 40,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* NTSC TV output */
+ .name = "TV-NTSC",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 858 - 640 - 38 - 3,
+ .upper_margin = 36,
+ .lower_margin = 518 - 480 - 36 - 1,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* PAL TV output */
+ .name = "TV-PAL",
+ .refresh = 50,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 960 - 640 - 38 - 32,
+ .upper_margin = 32,
+ .lower_margin = 555 - 480 - 32 - 3,
+ .hsync_len = 32,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* TV output VGA mode, 640x480 @ 65 Hz */
+ .name = "TV-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40574,
+ .left_margin = 35,
+ .right_margin = 45,
+ .upper_margin = 9,
+ .lower_margin = 1,
+ .hsync_len = 46,
+ .vsync_len = 5,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+struct mx3fb_data {
+ struct fb_info *fbi;
+ int backlight_level;
+ void __iomem *reg_base;
+ spinlock_t lock;
+ struct device *dev;
+
+ uint32_t h_start_width;
+ uint32_t v_start_width;
+};
+
+struct dma_chan_request {
+ struct mx3fb_data *mx3fb;
+ enum ipu_channel id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+ int blank;
+ enum ipu_channel ipu_ch;
+ uint32_t cur_ipu_buf;
+
+ u32 pseudo_palette[16];
+
+ struct completion flip_cmpl;
+ struct mutex mutex; /* Protects fb-ops */
+ struct mx3fb_data *mx3fb;
+ struct idmac_channel *idmac_channel;
+ struct dma_async_tx_descriptor *txd;
+ dma_cookie_t cookie;
+ struct scatterlist sg[2];
+
+ u32 sync; /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+ return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+ __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+ 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
+ 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
+ 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
+ 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+ return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct dma_chan *dma_chan = &ichan->dma_chan;
+ unsigned long flags;
+ dma_cookie_t cookie;
+
+ dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+ to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+ /* This enables the channel */
+ if (mx3_fbi->cookie < 0) {
+ mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+ &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!mx3_fbi->txd) {
+ dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ mx3_fbi->txd->callback_param = mx3_fbi->txd;
+ mx3_fbi->txd->callback = mx3fb_dma_done;
+
+ cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+ dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ } else {
+ if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+ dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+ dma_chan->chan_id);
+ return;
+ }
+
+ /* Just re-activate the same buffer */
+ dma_async_issue_pending(dma_chan);
+ cookie = mx3_fbi->cookie;
+ dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ }
+
+ if (cookie >= 0) {
+ spin_lock_irqsave(&mx3fb->lock, flags);
+ sdc_fb_init(mx3_fbi);
+ mx3_fbi->cookie = cookie;
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+ }
+
+ /*
+ * Attention! Without this msleep the channel keeps generating
+ * interrupts. Next sdc_set_brightness() is going to be called
+ * from mx3fb_blank().
+ */
+ msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ uint32_t enabled;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mx3fb->lock, flags);
+
+ enabled = sdc_fb_uninit(mx3_fbi);
+
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+ mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+ mx3_fbi->txd = NULL;
+ mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @x_pos: X coordinate relative to the top left corner to place window at.
+ * @y_pos: Y coordinate relative to the top left corner to place window at.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+ int16_t x_pos, int16_t y_pos)
+{
+ x_pos += mx3fb->h_start_width;
+ y_pos += mx3fb->v_start_width;
+
+ if (channel != IDMAC_SDC_0)
+ return -EINVAL;
+
+ mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+ return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb: mx3fb context.
+ * @panel: panel type.
+ * @pixel_clk: desired pixel clock frequency in Hz.
+ * @width: width of panel in pixels.
+ * @height: height of panel in pixels.
+ * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width: number of pixel clocks between the HSYNC signal pulse
+ * and the start of valid data.
+ * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width: number of pixel clocks between the end of valid data
+ * and the HSYNC signal for next line.
+ * @v_start_width: number of lines between the VSYNC signal pulse and the
+ * start of valid data.
+ * @v_sync_width: width of the VSYNC signal in units of lines
+ * @v_end_width: number of lines between the end of valid data and the
+ * VSYNC signal for next frame.
+ * @sig: bitfield of signal polarities for LCD interface.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+ uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ enum pixel_fmt pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ struct ipu_di_signal_cfg sig)
+{
+ unsigned long lock_flags;
+ uint32_t reg;
+ uint32_t old_conf;
+ uint32_t div;
+ struct clk *ipu_clk;
+
+ dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+ if (v_sync_width == 0 || h_sync_width == 0)
+ return -EINVAL;
+
+ /* Init panel size and blanking periods */
+ reg = ((uint32_t) (h_sync_width - 1) << 26) |
+ ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+ printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+ reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+ ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+ printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+ mx3fb->h_start_width = h_start_width;
+ mx3fb->v_start_width = v_start_width;
+
+ switch (panel) {
+ case IPU_PANEL_SHARP_TFT:
+ mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+ mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+ mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ case IPU_PANEL_TFT:
+ mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Init clocking */
+
+ /*
+ * Calculate divider: fractional part is 4 bits so simply multiple by
+ * 24 to get fractional part, as long as we stay under ~250MHz and on
+ * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ */
+ dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+ ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+ div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+ clk_put(ipu_clk);
+
+ if (div < 0x40) { /* Divider less than 4 */
+ dev_dbg(mx3fb->dev,
+ "InitPanel() - Pixel clock divider less than 4\n");
+ div = 0x40;
+ }
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ /*
+ * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+ * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+ * debug. DISP3_IF_CLK_UP_WR is 0
+ */
+ mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+ /* DI settings */
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+ old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+ sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+ sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+ sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+ sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+ sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+ sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_RGB24:
+ mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_RGB666:
+ mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_BGR666:
+ mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ default:
+ mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ }
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+ dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+ dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+ return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @enable: boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+ bool enable, uint32_t color_key)
+{
+ uint32_t reg, sdc_conf;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ if (channel == IDMAC_SDC_0)
+ sdc_conf &= ~SDC_COM_GWSEL;
+ else
+ sdc_conf |= SDC_COM_GWSEL;
+
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+ mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+ SDC_GW_CTRL);
+
+ sdc_conf |= SDC_COM_KEY_COLOR_G;
+ } else {
+ sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+ }
+ mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb: mx3fb context.
+ * @enable: boolean to enable or disable global alpha blending. If disabled,
+ * per pixel blending is used.
+ * @alpha: global alpha value.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+ uint32_t reg;
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+ mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ } else {
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+ }
+
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+ return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+ /* This might be board-specific */
+ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+ return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+ uint32_t pixfmt = 0;
+ switch (bpp) {
+ case 24:
+ pixfmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ pixfmt = IPU_PIX_FMT_BGR32;
+ break;
+ case 16:
+ pixfmt = IPU_PIX_FMT_RGB565;
+ break;
+ }
+ return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info: framebuffer information pointer
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+ struct fb_fix_screeninfo *fix = &fbi->fix;
+ struct fb_var_screeninfo *var = &fbi->var;
+
+ strncpy(fix->id, "DISP3 BG", 8);
+
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+
+ return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+ struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+ struct dma_chan *chan = tx_desc->txd.chan;
+ struct idmac_channel *ichannel = to_idmac_chan(chan);
+ struct mx3fb_data *mx3fb = ichannel->client;
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+ dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+ /* We only need one interrupt, it will be re-enabled as needed */
+ disable_irq(ichannel->eof_irq);
+
+ complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+ u32 mem_len;
+ struct ipu_di_signal_cfg sig_cfg;
+ enum ipu_panel mode = IPU_PANEL_TFT;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct idmac_video_param *video = &ichan->params.video;
+ struct scatterlist *sg = mx3_fbi->sg;
+ size_t screen_size;
+
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ /* Total cleanup */
+ if (mx3_fbi->txd)
+ sdc_disable_channel(mx3_fbi);
+
+ mx3fb_set_fix(fbi);
+
+ mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+ if (mem_len > fbi->fix.smem_len) {
+ if (fbi->fix.smem_start)
+ mx3fb_unmap_video_memory(fbi);
+
+ fbi->fix.smem_len = mem_len;
+ if (mx3fb_map_video_memory(fbi) < 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ return -ENOMEM;
+ }
+ }
+
+ screen_size = fbi->fix.line_length * fbi->var.yres;
+
+ sg_init_table(&sg[0], 1);
+ sg_init_table(&sg[1], 1);
+
+ sg_dma_address(&sg[0]) = fbi->fix.smem_start;
+ sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+ fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base));
+
+ if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ sig_cfg.clk_pol = true;
+ if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = true;
+ if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ sig_cfg.enable_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = true;
+ if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+ sig_cfg.clksel_en = true;
+ if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+ mode = IPU_PANEL_SHARP_TFT;
+
+ dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+ (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+ if (sdc_init_panel(mx3fb, mode,
+ (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+ fbi->var.xres, fbi->var.yres,
+ (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+ IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+ fbi->var.left_margin,
+ fbi->var.hsync_len,
+ fbi->var.right_margin +
+ fbi->var.hsync_len,
+ fbi->var.upper_margin,
+ fbi->var.vsync_len,
+ fbi->var.lower_margin +
+ fbi->var.vsync_len, sig_cfg) != 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_err(fbi->device,
+ "mx3fb: Error initializing panel.\n");
+ return -EINVAL;
+ }
+ }
+
+ sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+ mx3_fbi->cur_ipu_buf = 0;
+
+ video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+ video->out_width = fbi->var.xres;
+ video->out_height = fbi->var.yres;
+ video->out_stride = fbi->var.xres_virtual;
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+ sdc_enable_channel(mx3_fbi);
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var: framebuffer variable parameters
+ * @fbi: framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 vtotal;
+ u32 htotal;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ }
+
+ if (var->pixclock < 1000) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ /* Preserve sync flags */
+ var->sync |= mx3_fbi->sync;
+ mx3_fbi->sync |= var->sync;
+
+ return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int trans, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 val;
+ int ret = 1;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ mutex_lock(&mx3_fbi->mutex);
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (fbi->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->pseudo_palette;
+
+ val = chan_to_field(red, &fbi->var.red);
+ val |= chan_to_field(green, &fbi->var.green);
+ val |= chan_to_field(blue, &fbi->var.blue);
+
+ pal[regno] = val;
+
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+ dev_dbg(fbi->device, "%s\n", __func__);
+
+ dev_dbg(fbi->device, "blank = %d\n", blank);
+
+ if (mx3_fbi->blank == blank)
+ return 0;
+
+ mutex_lock(&mx3_fbi->mutex);
+ mx3_fbi->blank = blank;
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+ break;
+ case FB_BLANK_UNBLANK:
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
+
+ return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var: variable screen buffer information.
+ * @info: framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *fbi)
+{
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 y_bottom;
+ unsigned long base;
+ off_t offset;
+ dma_cookie_t cookie;
+ struct scatterlist *sg = mx3_fbi->sg;
+ struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+ struct dma_async_tx_descriptor *txd;
+ int ret;
+
+ dev_dbg(fbi->device, "%s [%c]\n", __func__,
+ list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+ if (var->xoffset > 0) {
+ dev_dbg(fbi->device, "x panning not supported\n");
+ return -EINVAL;
+ }
+
+ if (fbi->var.xoffset == var->xoffset &&
+ fbi->var.yoffset == var->yoffset)
+ return 0; /* No change, do nothing */
+
+ y_bottom = var->yoffset;
+
+ if (!(var->vmode & FB_VMODE_YWRAP))
+ y_bottom += var->yres;
+
+ if (y_bottom > fbi->var.yres_virtual)
+ return -EINVAL;
+
+ mutex_lock(&mx3_fbi->mutex);
+
+ offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+ (var->bits_per_pixel / 8);
+ base = fbi->fix.smem_start + offset;
+
+ dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+
+ /*
+ * We enable the End of Frame interrupt, which will free a tx-descriptor,
+ * which we will need for the next device_prep_slave_sg(). The
+ * IRQ-handler will disable the IRQ again.
+ */
+ init_completion(&mx3_fbi->flip_cmpl);
+ enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+ ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+ if (ret <= 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+ "user interrupt" : "timeout");
+ return ret ? : -ETIMEDOUT;
+ }
+
+ mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+ sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+ sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+ virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base + offset));
+
+ txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+ mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!txd) {
+ dev_err(fbi->device,
+ "Error preparing a DMA transaction descriptor.\n");
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ txd->callback_param = txd;
+ txd->callback = mx3fb_dma_done;
+
+ /*
+ * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+ * should switch to another buffer
+ */
+ cookie = txd->tx_submit(txd);
+ dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+ if (cookie < 0) {
+ dev_err(fbi->device,
+ "Error updating SDC buf %d to address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
+
+ if (mx3_fbi->txd)
+ async_tx_ack(mx3_fbi->txd);
+ mx3_fbi->txd = txd;
+
+ fbi->var.xoffset = var->xoffset;
+ fbi->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ fbi->var.vmode |= FB_VMODE_YWRAP;
+ else
+ fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+ mutex_unlock(&mx3_fbi->mutex);
+
+ dev_dbg(fbi->device, "Update complete\n");
+
+ return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_set_par = mx3fb_set_par,
+ .fb_check_var = mx3fb_check_var,
+ .fb_setcolreg = mx3fb_setcolreg,
+ .fb_pan_display = mx3fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 1);
+ release_console_sem();
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+
+ }
+ return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ }
+
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 0);
+ release_console_sem();
+
+ return 0;
+}
+#else
+#define mx3fb_suspend NULL
+#define mx3fb_resume NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi: framebuffer information pointer
+ * @return: Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+ int retval = 0;
+ dma_addr_t addr;
+
+ fbi->screen_base = dma_alloc_writecombine(fbi->device,
+ fbi->fix.smem_len,
+ &addr, GFP_DMA);
+
+ if (!fbi->screen_base) {
+ dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+ fbi->fix.smem_len);
+ retval = -EBUSY;
+ goto err0;
+ }
+
+ fbi->fix.smem_start = addr;
+
+ dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+ (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+ fbi->screen_size = fbi->fix.smem_len;
+
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+ return 0;
+
+err0:
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ fbi->screen_base = NULL;
+ return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi: framebuffer information pointer
+ * @return: error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
+
+ fbi->screen_base = 0;
+ fbi->fix.smem_start = 0;
+ fbi->fix.smem_len = 0;
+ return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return: initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ int ret;
+
+ /* Allocate sufficient memory for the fb structure */
+ fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+ if (!fbi)
+ return NULL;
+
+ mx3fbi = fbi->par;
+ mx3fbi->cookie = -EINVAL;
+ mx3fbi->cur_ipu_buf = 0;
+
+ fbi->var.activate = FB_ACTIVATE_NOW;
+
+ fbi->fbops = ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mx3fbi->pseudo_palette;
+
+ mutex_init(&mx3fbi->mutex);
+
+ /* Allocate colormap */
+ ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+ if (ret < 0) {
+ framebuffer_release(fbi);
+ return NULL;
+ }
+
+ return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+ struct device *dev = mx3fb->dev;
+ struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+ const char *name = mx3fb_pdata->name;
+ unsigned int irq;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ const struct fb_videomode *mode;
+ int ret, num_modes;
+
+ ichan->client = mx3fb;
+ irq = ichan->eof_irq;
+
+ if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+ return -EINVAL;
+
+ fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+ if (!fbi)
+ return -ENOMEM;
+
+ if (!fb_mode)
+ fb_mode = name;
+
+ if (!fb_mode) {
+ ret = -EINVAL;
+ goto emode;
+ }
+
+ if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
+
+ if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+ num_modes, NULL, default_bpp)) {
+ ret = -EBUSY;
+ goto emode;
+ }
+
+ fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+ /* Default Y virtual size is 2x panel size */
+ fbi->var.yres_virtual = fbi->var.yres * 2;
+
+ mx3fb->fbi = fbi;
+
+ /* set Display Interface clock period */
+ mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+ /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+ sdc_set_brightness(mx3fb, 255);
+ sdc_set_global_alpha(mx3fb, true, 0xFF);
+ sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+ mx3fbi = fbi->par;
+ mx3fbi->idmac_channel = ichan;
+ mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
+ mx3fbi->mx3fb = mx3fb;
+ mx3fbi->blank = FB_BLANK_NORMAL;
+
+ init_completion(&mx3fbi->flip_cmpl);
+ disable_irq(ichan->eof_irq);
+ dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = mx3fb_set_par(fbi);
+ if (ret < 0)
+ goto esetpar;
+
+ mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+ dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+ ret = register_framebuffer(fbi);
+ if (ret < 0)
+ goto erfb;
+
+ return 0;
+
+erfb:
+esetpar:
+emode:
+ fb_dealloc_cmap(&fbi->cmap);
+ framebuffer_release(fbi);
+
+ return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct dma_chan_request *rq = arg;
+ struct device *dev;
+ struct mx3fb_platform_data *mx3fb_pdata;
+
+ if (!rq)
+ return false;
+
+ dev = rq->mx3fb->dev;
+ mx3fb_pdata = dev->platform_data;
+
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+ mx3fb_unmap_video_memory(fbi);
+
+ fb_dealloc_cmap(&fbi->cmap);
+
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct resource *sdc_reg;
+ struct mx3fb_data *mx3fb;
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_chan_request rq;
+
+ /*
+ * Display Interface (DI) and Synchronous Display Controller (SDC)
+ * registers
+ */
+ sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sdc_reg)
+ return -EINVAL;
+
+ mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+ if (!mx3fb)
+ return -ENOMEM;
+
+ spin_lock_init(&mx3fb->lock);
+
+ mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+ if (!mx3fb->reg_base) {
+ ret = -ENOMEM;
+ goto eremap;
+ }
+
+ pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+ mx3fb->reg_base);
+
+ /* IDMAC interface */
+ dmaengine_get();
+
+ mx3fb->dev = dev;
+ platform_set_drvdata(pdev, mx3fb);
+
+ rq.mx3fb = mx3fb;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_PRIVATE, mask);
+ rq.id = IDMAC_SDC_0;
+ chan = dma_request_channel(mask, chan_filter, &rq);
+ if (!chan) {
+ ret = -EBUSY;
+ goto ersdc0;
+ }
+
+ ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+ if (ret < 0)
+ goto eisdc0;
+
+ mx3fb->backlight_level = 255;
+
+ return 0;
+
+eisdc0:
+ dma_release_channel(chan);
+ersdc0:
+ dmaengine_put();
+ iounmap(mx3fb->reg_base);
+eremap:
+ kfree(mx3fb);
+ dev_err(dev, "mx3fb: failed to register fb\n");
+ return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+ struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+ struct fb_info *fbi = mx3fb->fbi;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct dma_chan *chan;
+
+ chan = &mx3_fbi->idmac_channel->dma_chan;
+ release_fbi(fbi);
+
+ dma_release_channel(chan);
+ dmaengine_put();
+
+ iounmap(mx3fb->reg_base);
+ kfree(mx3fb);
+ return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+ .driver = {
+ .name = MX3FB_NAME,
+ },
+ .probe = mx3fb_probe,
+ .remove = mx3fb_remove,
+ .suspend = mx3fb_suspend,
+ .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ * video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+ char *opt, *options = NULL;
+
+ if (fb_get_options("mx3fb", &options))
+ return -ENODEV;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "bpp=", 4))
+ default_bpp = simple_strtoul(opt + 4, NULL, 0);
+ else
+ fb_mode = opt;
+ }
+#endif
+
+ return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+ int ret = mx3fb_setup();
+
+ if (ret < 0)
+ return ret;
+
+ ret = platform_driver_register(&mx3fb_driver);
+ return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+ platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 38ac805db97..87f826e4c95 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -1006,7 +1006,7 @@ static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev)
__func__, status);
return -ENXIO;
}
- dev_dbg(dev, "video:%p ioif:%lx lpar:%lx size:%lx\n",
+ dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
ps3fb_videomemory.size);
@@ -1133,7 +1133,7 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev)
__func__, status);
goto err;
}
- dev_dbg(&dev->core, "ddr:lpar:0x%lx\n", ddr_lpar);
+ dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
status = lv1_gpu_context_allocate(ps3fb.memory_handle, 0,
&ps3fb.context_handle,
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 13:16:54 +0000