diff options
Diffstat (limited to 'drivers/watchdog/i6300esb.c')
| -rw-r--r-- | drivers/watchdog/i6300esb.c | 132 |
1 files changed, 71 insertions, 61 deletions
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index 8a0ef65a069..7ba0b11ec52 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -123,7 +123,7 @@ static int esb_timer_start(void) esb_unlock_registers(); writew(ESB_WDT_RELOAD, ESB_RELOAD_REG); /* Enable or Enable + Lock? */ - val = 0x02 | (nowayout ? 0x01 : 0x00); + val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00); pci_write_config_byte(esb_pci, ESB_LOCK_REG, val); spin_unlock(&esb_lock); return 0; @@ -143,7 +143,7 @@ static int esb_timer_stop(void) spin_unlock(&esb_lock); /* Returns 0 if the timer was disabled, non-zero otherwise */ - return val & 0x01; + return val & ESB_WDT_ENABLE; } static void esb_timer_keepalive(void) @@ -350,8 +350,6 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl); static unsigned char __devinit esb_getdevice(void) { - u8 val1; - unsigned short val2; /* * Find the PCI device */ @@ -359,67 +357,79 @@ static unsigned char __devinit esb_getdevice(void) esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9, NULL); - if (esb_pci) { - if (pci_enable_device(esb_pci)) { - printk(KERN_ERR PFX "failed to enable device\n"); - goto err_devput; - } + if (!esb_pci) + return 0; - if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) { - printk(KERN_ERR PFX "failed to request region\n"); - goto err_disable; - } + if (pci_enable_device(esb_pci)) { + printk(KERN_ERR PFX "failed to enable device\n"); + goto err_devput; + } - BASEADDR = pci_ioremap_bar(esb_pci, 0); - if (BASEADDR == NULL) { - /* Something's wrong here, BASEADDR has to be set */ - printk(KERN_ERR PFX "failed to get BASEADDR\n"); - goto err_release; - } + if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) { + printk(KERN_ERR PFX "failed to request region\n"); + goto err_disable; + } - /* - * The watchdog has two timers, it can be setup so that the - * expiry of timer1 results in an interrupt and the expiry of - * timer2 results in a reboot. We set it to not generate - * any interrupts as there is not much we can do with it - * right now. - * - * We also enable reboots and set the timer frequency to - * the PCI clock divided by 2^15 (approx 1KHz). - */ - pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003); - - /* Check that the WDT isn't already locked */ - pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1); - if (val1 & ESB_WDT_LOCK) - printk(KERN_WARNING PFX "nowayout already set\n"); - - /* Set the timer to watchdog mode and disable it for now */ - pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00); - - /* Check if the watchdog was previously triggered */ - esb_unlock_registers(); - val2 = readw(ESB_RELOAD_REG); - if (val2 & ESB_WDT_TIMEOUT) - triggered = WDIOF_CARDRESET; - - /* Reset trigger flag and timers */ - esb_unlock_registers(); - writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG); - - /* Done */ - return 1; + BASEADDR = pci_ioremap_bar(esb_pci, 0); + if (BASEADDR == NULL) { + /* Something's wrong here, BASEADDR has to be set */ + printk(KERN_ERR PFX "failed to get BASEADDR\n"); + goto err_release; + } + + /* Done */ + return 1; err_release: - pci_release_region(esb_pci, 0); + pci_release_region(esb_pci, 0); err_disable: - pci_disable_device(esb_pci); + pci_disable_device(esb_pci); err_devput: - pci_dev_put(esb_pci); - } + pci_dev_put(esb_pci); return 0; } +static void __devinit esb_initdevice(void) +{ + u8 val1; + u16 val2; + + /* + * Config register: + * Bit 5 : 0 = Enable WDT_OUTPUT + * Bit 2 : 0 = set the timer frequency to the PCI clock + * divided by 2^15 (approx 1KHz). + * Bits 1:0 : 11 = WDT_INT_TYPE Disabled. + * The watchdog has two timers, it can be setup so that the + * expiry of timer1 results in an interrupt and the expiry of + * timer2 results in a reboot. We set it to not generate + * any interrupts as there is not much we can do with it + * right now. + */ + pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003); + + /* Check that the WDT isn't already locked */ + pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1); + if (val1 & ESB_WDT_LOCK) + printk(KERN_WARNING PFX "nowayout already set\n"); + + /* Set the timer to watchdog mode and disable it for now */ + pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00); + + /* Check if the watchdog was previously triggered */ + esb_unlock_registers(); + val2 = readw(ESB_RELOAD_REG); + if (val2 & ESB_WDT_TIMEOUT) + triggered = WDIOF_CARDRESET; + + /* Reset WDT_TIMEOUT flag and timers */ + esb_unlock_registers(); + writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG); + + /* And set the correct timeout value */ + esb_timer_set_heartbeat(heartbeat); +} + static int __devinit esb_probe(struct platform_device *dev) { int ret; @@ -430,13 +440,17 @@ static int __devinit esb_probe(struct platform_device *dev) /* Check that the heartbeat value is within it's range; if not reset to the default */ - if (esb_timer_set_heartbeat(heartbeat)) { - esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT); + if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) { + heartbeat = WATCHDOG_HEARTBEAT; printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n", heartbeat); } + /* Initialize the watchdog and make sure it does not run */ + esb_initdevice(); + + /* Register the watchdog so that userspace has access to it */ ret = misc_register(&esb_miscdev); if (ret != 0) { printk(KERN_ERR PFX @@ -444,7 +458,6 @@ static int __devinit esb_probe(struct platform_device *dev) WATCHDOG_MINOR, ret); goto err_unmap; } - esb_timer_stop(); printk(KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", BASEADDR, heartbeat, nowayout); @@ -452,11 +465,8 @@ static int __devinit esb_probe(struct platform_device *dev) err_unmap: iounmap(BASEADDR); -/* err_release: */ pci_release_region(esb_pci, 0); -/* err_disable: */ pci_disable_device(esb_pci); -/* err_devput: */ pci_dev_put(esb_pci); return ret; } |