aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/chips/Kconfig26
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/misc/Kconfig1
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/eeprom/Kconfig29
-rw-r--r--drivers/misc/eeprom/Makefile1
-rw-r--r--drivers/misc/eeprom/at24.c (renamed from drivers/i2c/chips/at24.c)0
7 files changed, 32 insertions, 27 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04b7be..b58e77056b2 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,32 +16,6 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
-config AT24
- tristate "EEPROMs from most vendors"
- depends on SYSFS && EXPERIMENTAL
- help
- Enable this driver to get read/write support to most I2C EEPROMs,
- after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
- vendor-specific ones like at24c64 or 24lc02:
-
- 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
- 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
- Unless you like data loss puzzles, always be sure that any chip
- you configure as a 24c32 (32 kbit) or larger is NOT really a
- 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
- as read-only won't help recover from this. Also, if your chip
- has any software write-protect mechanism you may want to review the
- code to make sure this driver won't turn it on by accident.
-
- If you use this with an SMBus adapter instead of an I2C adapter,
- full functionality is not available. Only smaller devices are
- supported (24c16 and below, max 4 kByte).
-
- This driver can also be built as a module. If so, the module
- will be called at24.
-
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb5193ac..5c14776eb76 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
#
obj-$(CONFIG_DS1682) += ds1682.o
-obj-$(CONFIG_AT24) += at24.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378bd24..6c9cd9d3008 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -231,5 +231,6 @@ config DELL_LAPTOP
laptops.
source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d5749a7bc77..0ec23203c99 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_C2PORT) += c2port/
+obj-y += eeprom/
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 00000000000..0b21778b7d1
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,29 @@
+menu "EEPROM support"
+
+config AT24
+ tristate "I2C EEPROMs from most vendors"
+ depends on I2C && SYSFS && EXPERIMENTAL
+ help
+ Enable this driver to get read/write support to most I2C EEPROMs,
+ after you configure the driver to know about each EEPROM on
+ your target board. Use these generic chip names, instead of
+ vendor-specific ones like at24c64 or 24lc02:
+
+ 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+ 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+ Unless you like data loss puzzles, always be sure that any chip
+ you configure as a 24c32 (32 kbit) or larger is NOT really a
+ 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+ as read-only won't help recover from this. Also, if your chip
+ has any software write-protect mechanism you may want to review the
+ code to make sure this driver won't turn it on by accident.
+
+ If you use this with an SMBus adapter instead of an I2C adapter,
+ full functionality is not available. Only smaller devices are
+ supported (24c16 and below, max 4 kByte).
+
+ This driver can also be built as a module. If so, the module
+ will be called at24.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 00000000000..72cd478eb53
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_AT24) += at24.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c
index d4775528abc..d4775528abc 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/misc/eeprom/at24.c