diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/staging/android/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/staging/android/ram_console.c | 14 | ||||
| -rw-r--r-- | drivers/staging/android/timed_gpio.c | 2 | ||||
| -rw-r--r-- | drivers/staging/at76_usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/staging/at76_usb/at76_usb.c | 4620 | ||||
| -rw-r--r-- | drivers/staging/at76_usb/at76_usb.h | 227 | ||||
| -rw-r--r-- | drivers/staging/panel/panel.c | 10 |
7 files changed, 3903 insertions, 973 deletions
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 6b996db0dd6..604bd1e0d54 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,6 +27,7 @@ menuconfig ANDROID_RAM_CONSOLE_ERROR_CORRECTION bool "Android RAM Console Enable error correction" default n depends on ANDROID_RAM_CONSOLE + depends on !ANDROID_RAM_CONSOLE_EARLY_INIT select REED_SOLOMON select REED_SOLOMON_ENC8 select REED_SOLOMON_DEC8 diff --git a/drivers/staging/android/ram_console.c b/drivers/staging/android/ram_console.c index bf006857a87..643ac5ce381 100644 --- a/drivers/staging/android/ram_console.c +++ b/drivers/staging/android/ram_console.c @@ -224,9 +224,23 @@ static int __init ram_console_init(struct ram_console_buffer *buffer, ram_console_buffer_size = buffer_size - sizeof(struct ram_console_buffer); + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + #ifdef CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION ram_console_buffer_size -= (DIV_ROUND_UP(ram_console_buffer_size, ECC_BLOCK_SIZE) + 1) * ECC_SIZE; + + if (ram_console_buffer_size > buffer_size) { + pr_err("ram_console: buffer %p, invalid size %d, " + "non-ecc datasize %d\n", + buffer, buffer_size, ram_console_buffer_size); + return 0; + } + ram_console_par_buffer = buffer->data + ram_console_buffer_size; diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index 903270cbbe0..33daff0481d 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -50,7 +50,7 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); struct timeval t = ktime_to_timeval(r); - remaining = t.tv_sec * 1000 + t.tv_usec; + remaining = t.tv_sec * 1000 + t.tv_usec / 1000; } else remaining = 0; diff --git a/drivers/staging/at76_usb/Kconfig b/drivers/staging/at76_usb/Kconfig index 4c0e55e1544..8606f962162 100644 --- a/drivers/staging/at76_usb/Kconfig +++ b/drivers/staging/at76_usb/Kconfig @@ -1,6 +1,6 @@ config USB_ATMEL tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB + depends on WLAN_80211 && USB default N select FW_LOADER ---help--- diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 185533e5476..c8e4d31c7df 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -6,7 +6,6 @@ * Copyright (c) 2004 Nick Jones * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com> * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org> - * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -17,13 +16,6 @@ * Atmel AT76C503A/505/505A. * * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed - * - * TODO for the mac80211 port: - * o adhoc support - * o RTS/CTS support - * o Power Save Mode support - * o support for short/long preambles - * o export variables through debugfs/sysfs */ #include <linux/init.h> @@ -44,7 +36,7 @@ #include <net/ieee80211_radiotap.h> #include <linux/firmware.h> #include <linux/leds.h> -#include <net/mac80211.h> +#include <net/ieee80211.h> #include "at76_usb.h" @@ -84,43 +76,31 @@ #define DBG_WE_EVENTS 0x08000000 /* dump wireless events */ #define DBG_FW 0x10000000 /* firmware download */ #define DBG_DFU 0x20000000 /* device firmware upgrade */ -#define DBG_CMD 0x40000000 -#define DBG_MAC80211 0x80000000 #define DBG_DEFAULTS 0 /* Use our own dbg macro */ #define at76_dbg(bits, format, arg...) \ -do { \ - if (at76_debug & (bits)) \ - printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ -} while (0) - -#define at76_dbg_dump(bits, buf, len, format, arg...) \ -do { \ - if (at76_debug & (bits)) { \ + do { \ + if (at76_debug & (bits)) \ printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \ - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \ - } \ -} while (0) + } while (0) static int at76_debug = DBG_DEFAULTS; -#define FIRMWARE_IS_WPA(ver) ((ver.major == 1) && (ver.minor == 103)) - /* Protect against concurrent firmware loading and parsing */ static struct mutex fw_mutex; static struct fwentry firmwares[] = { - [0] = { "" }, - [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" }, - [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" }, - [BOARD_503] = { "atmel_at76c503-rfmd.bin" }, - [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" }, - [BOARD_505] = { "atmel_at76c505-rfmd.bin" }, - [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" }, - [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, - [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, + [0] = {""}, + [BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"}, + [BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"}, + [BOARD_503] = {"atmel_at76c503-rfmd.bin"}, + [BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"}, + [BOARD_505] = {"atmel_at76c505-rfmd.bin"}, + [BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"}, + [BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"}, + [BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"}, }; #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) @@ -130,133 +110,135 @@ static struct usb_device_id dev_table[] = { * at76c503-i3861 */ /* Generic AT76C503/3861 device */ - { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Linksys WUSB11 v2.1/v2.6 */ - { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Netgear MA101 rev. A */ - { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Tekram U300C / Allnet ALL0193 */ - { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* HP HN210W J7801A */ - { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Sitecom/Z-Com/Zyxel M4Y-750 */ - { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink/Askey WLL013 (intersil) */ - { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */ - { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BenQ AWL300 */ - { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Addtron AWU-120, Compex WLU11 */ - { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Intel AP310 AnyPoint II USB */ - { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Dynalink L11U */ - { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* Arescom WL-210, FCC id 07J-GL2411USB */ - { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* I-O DATA WN-B11/USB */ - { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* BT Voyager 1010 */ - { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + {USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)}, /* * at76c503-i3863 */ /* Generic AT76C503/3863 device */ - { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* Samsung SWL-2100U */ - { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + {USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)}, /* * at76c503-rfmd */ /* Generic AT76C503/RFMD device */ - { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* Dynalink/Askey WLL013 (rfmd) */ - { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)}, /* Linksys WUSB11 v2.6 */ - { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)}, /* Network Everywhere NWU11B */ - { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)}, /* Netgear MA101 rev. B */ - { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* D-Link DWL-120 rev. E */ - { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)}, /* Actiontec 802UAT1, HWU01150-01UK */ - { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)}, /* AirVast W-Buddie WN210 */ - { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)}, /* Dick Smith Electronics XH1153 802.11b USB adapter */ - { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)}, /* CNet CNUSB611 */ - { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)}, /* FiberLine FL-WL200U */ - { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)}, /* BenQ AWL400 USB stick */ - { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)}, /* 3Com 3CRSHEW696 */ - { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)}, /* Siemens Santis ADSL WLAN USB adapter WLL 013 */ - { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)}, /* Belkin F5D6050, version 2 */ - { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)}, /* iBlitzz, BWU613 (not *B or *SB) */ - { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)}, /* Gigabyte GN-WLBM101 */ - { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)}, /* Planex GW-US11S */ - { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)}, /* Internal WLAN adapter in h5[4,5]xx series iPAQs */ - { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini */ - { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)}, /* Corega Wireless LAN USB-11 mini2 */ - { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)}, /* Uniden PCW100 */ - { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) }, + {USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)}, /* * at76c503-rfmd-acc */ /* SMC2664W */ - { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)}, /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */ - { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) }, + {USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)}, /* * at76c505-rfmd */ /* Generic AT76C505/RFMD */ - { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) }, + {USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)}, /* * at76c505-rfmd2958 */ /* Generic AT76C505/RFMD, OvisLink WL-1130USB */ - { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Fiberline FL-WL240U */ - { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)}, /* CNet CNUSB-611G */ - { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)}, /* Linksys WUSB11 v2.8 */ - { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)}, /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */ - { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)}, /* Corega WLAN USB Stick 11 */ - { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)}, /* Microstar MSI Box MS6978 */ - { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) }, + {USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)}, /* * at76c505a-rfmd2958 */ /* Generic AT76C505A device */ - { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)}, /* Generic AT76C505AS device */ - { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)}, /* Siemens Gigaset USB WLAN Adapter 11 */ - { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + {USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)}, + /* OQO Model 01+ Internal Wi-Fi */ + {USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)}, /* * at76c505amx-rfmd */ /* Generic AT76C505AMX device */ - { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) }, - { } + {USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)}, + {} }; MODULE_DEVICE_TABLE(usb, dev_table); @@ -264,8 +246,26 @@ MODULE_DEVICE_TABLE(usb, dev_table); /* Supported rates of this hardware, bit 7 marks basic rates */ static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 }; +/* Frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; + +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + static const char *const preambles[] = { "long", "short", "auto" }; +static const char *const mac_states[] = { + [MAC_INIT] = "INIT", + [MAC_SCANNING] = "SCANNING", + [MAC_AUTH] = "AUTH", + [MAC_ASSOC] = "ASSOC", + [MAC_JOINING] = "JOINING", + [MAC_CONNECTED] = "CONNECTED", + [MAC_OWN_IBSS] = "OWN_IBSS" +}; + /* Firmware download */ /* DFU states */ #define STATE_IDLE 0x00 @@ -300,30 +300,17 @@ struct dfu_status { static inline int at76_is_intersil(enum board_type board) { - if (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863) - return 1; - return 0; + return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863); } static inline int at76_is_503rfmd(enum board_type board) { - if (board == BOARD_503 || board == BOARD_503_ACC) - return 1; - return 0; -} - -static inline int at76_is_505(enum board_type board) -{ - if (board == BOARD_505 || board == BOARD_505_2958) - return 1; - return 0; + return (board == BOARD_503 || board == BOARD_503_ACC); } static inline int at76_is_505a(enum board_type board) { - if (board == BOARD_505A || board == BOARD_505AMX) - return 1; - return 0; + return (board == BOARD_505A || board == BOARD_505AMX); } /* Load a block of the first (internal) part of the firmware */ @@ -504,6 +491,41 @@ exit: return ret; } +/* Report that the scan results are ready */ +static inline void at76_iwevent_scan_complete(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name); +} + +static inline void at76_iwevent_bss_connect(struct net_device *netdev, + u8 *bssid) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + +static inline void at76_iwevent_bss_disconnect(struct net_device *netdev) +{ + union iwreq_data wrqu; + wrqu.data.length = 0; + wrqu.data.flags = 0; + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL); + at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name, + __func__); +} + #define HEX2STR_BUFFERS 4 #define HEX2STR_MAX_LEN 64 #define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10) @@ -575,6 +597,37 @@ static void at76_ledtrig_tx_activity(void) mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); } +/* Check if the given ssid is hidden */ +static inline int at76_is_hidden_ssid(u8 *ssid, int length) +{ + static const u8 zeros[32]; + + if (length == 0) + return 1; + + if (length == 1 && ssid[0] == ' ') + return 1; + + return (memcmp(ssid, zeros, length) == 0); +} + +static inline void at76_free_bss_list(struct at76_priv *priv) +{ + struct list_head *next, *ptr; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + priv->curr_bss = NULL; + + list_for_each_safe(ptr, next, &priv->bss_list) { + list_del(ptr); + kfree(list_entry(ptr, struct bss_info, list)); + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + static int at76_remap(struct usb_device *udev) { int ret; @@ -598,7 +651,7 @@ static int at76_get_op_mode(struct usb_device *udev) return -ENOMEM; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, USB_TYPE_VENDOR | USB_DIR_IN | - USB_RECIP_INTERFACE, 0x01, 0, &op_mode, 1, + USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1, USB_CTRL_GET_TIMEOUT); saved = *op_mode; kfree(op_mode); @@ -676,7 +729,7 @@ exit: kfree(hwcfg); if (ret < 0) printk(KERN_ERR "%s: cannot get HW Config (error %d)\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -685,15 +738,15 @@ static struct reg_domain const *at76_get_reg_domain(u16 code) { int i; static struct reg_domain const fd_tab[] = { - { 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */ - { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */ - { 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */ - { 0x31, "Spain", 0x600 }, /* ch 10-11 */ - { 0x32, "France", 0x1e00 }, /* ch 10-13 */ - { 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */ - { 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */ - { 0x50, "Israel", 0x3fc }, /* ch 3-9 */ - { 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */ + {0x10, "FCC (USA)", 0x7ff}, /* ch 1-11 */ + {0x20, "IC (Canada)", 0x7ff}, /* ch 1-11 */ + {0x30, "ETSI (most of Europe)", 0x1fff}, /* ch 1-13 */ + {0x31, "Spain", 0x600}, /* ch 10-11 */ + {0x32, "France", 0x1e00}, /* ch 10-13 */ + {0x40, "MKK (Japan)", 0x2000}, /* ch 14 */ + {0x41, "MKK1 (Japan)", 0x3fff}, /* ch 1-14 */ + {0x50, "Israel", 0x3fc}, /* ch 3-9 */ + {0x00, "<unknown>", 0xffffffff} /* ch 1-32 */ }; /* Last entry is fallback for unknown domain code */ @@ -731,7 +784,7 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE, cmd, 0, stat_buf, - sizeof(stat_buf), USB_CTRL_GET_TIMEOUT); + 40, USB_CTRL_GET_TIMEOUT); if (ret >= 0) ret = stat_buf[5]; kfree(stat_buf); @@ -739,24 +792,6 @@ static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) return ret; } -#define MAKE_CMD_CASE(c) case (c): return #c - -static const char *at76_get_cmd_string(u8 cmd_status) -{ - switch (cmd_status) { - MAKE_CMD_CASE(CMD_SET_MIB); - MAKE_CMD_CASE(CMD_GET_MIB); - MAKE_CMD_CASE(CMD_SCAN); - MAKE_CMD_CASE(CMD_JOIN); - MAKE_CMD_CASE(CMD_START_IBSS); - MAKE_CMD_CASE(CMD_RADIO_ON); - MAKE_CMD_CASE(CMD_RADIO_OFF); - MAKE_CMD_CASE(CMD_STARTUP); - } - - return "UNKNOWN"; -} - static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, int buf_size) { @@ -772,10 +807,6 @@ static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, cmd_buf->size = cpu_to_le16(buf_size); memcpy(cmd_buf->data, buf, buf_size); - at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size, - "issuing command %s (0x%02x)", - at76_get_cmd_string(cmd), cmd); - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, 0, 0, cmd_buf, @@ -813,13 +844,13 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) status = at76_get_cmd_status(priv->udev, cmd); if (status < 0) { printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n", - wiphy_name(priv->hw->wiphy), status); + priv->netdev->name, status); break; } at76_dbg(DBG_WAIT_COMPLETE, "%s: Waiting on cmd %d, status = %d (%s)", - wiphy_name(priv->hw->wiphy), cmd, status, + priv->netdev->name, cmd, status, at76_get_cmd_status_string(status)); if (status != CMD_STATUS_IN_PROGRESS @@ -830,7 +861,7 @@ static int at76_wait_completion(struct at76_priv *priv, int cmd) if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: completion timeout for command %d\n", - wiphy_name(priv->hw->wiphy), cmd); + priv->netdev->name, cmd); status = -ETIMEDOUT; break; } @@ -853,7 +884,7 @@ static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf) if (ret != CMD_STATUS_COMPLETE) { printk(KERN_INFO "%s: set_mib: at76_wait_completion failed " - "with %d\n", wiphy_name(priv->hw->wiphy), ret); + "with %d\n", priv->netdev->name, ret); ret = -EIO; } @@ -874,7 +905,7 @@ static int at76_set_radio(struct at76_priv *priv, int enable) ret = at76_set_card_command(priv->udev, cmd, NULL, 0); if (ret < 0) printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n", - wiphy_name(priv->hw->wiphy), cmd, ret); + priv->netdev->name, cmd, ret); else ret = 1; @@ -895,7 +926,44 @@ static int at76_set_pm_mode(struct at76_priv *priv) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); + + return ret; +} + +/* Set the association id for power save mode */ +static int at76_set_associd(struct at76_priv *priv, u16 id) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id); + priv->mib_buf.data.word = cpu_to_le16(id); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (associd) failed: %d\n", + priv->netdev->name, ret); + + return ret; +} + +/* Set the listen interval for power save mode */ +static int at76_set_listen_interval(struct at76_priv *priv, u16 interval) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac, listen_interval); + priv->mib_buf.data.word = cpu_to_le16(interval); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR + "%s: set_mib (listen_interval) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -912,7 +980,7 @@ static int at76_set_preamble(struct at76_priv *priv, u8 type) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -929,7 +997,7 @@ static int at76_set_frag(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -946,7 +1014,7 @@ static int at76_set_rts(struct at76_priv *priv, u16 size) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (rts) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -963,41 +1031,24 @@ static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } -static int at76_set_tkip_bssid(struct at76_priv *priv, const void *addr) +static int at76_add_mac_address(struct at76_priv *priv, void *addr) { int ret = 0; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + priv->mib_buf.type = MIB_MAC_ADDR; priv->mib_buf.size = ETH_ALEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, tkip_bssid); + priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr); memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN); ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, tkip_bssid) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - - return ret; -} - -static int at76_reset_rsc(struct at76_priv *priv) -{ - int ret = 0; - - priv->mib_buf.type = MIB_MAC_ENCRYPTION; - priv->mib_buf.size = 4 * 8; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, key_rsc); - memset(priv->mib_buf.data.data, 0 , priv->mib_buf.size); - - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret < 0) - printk(KERN_ERR "%s: set_mib (MAC_ENCRYPTION, key_rsc) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n", + priv->netdev->name, ret); return ret; } @@ -1016,16 +1067,16 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) sizeof(struct mib_mac_addr)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, mac2str(m->mac_addr), m->res[0], m->res[1]); for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, " - "status %d", wiphy_name(priv->hw->wiphy), i, + "status %d", priv->netdev->name, i, mac2str(m->group_addr[i]), m->group_addr_status[i]); exit: kfree(m); @@ -1045,13 +1096,13 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) sizeof(struct mib_mac_wep)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u " "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u " - "encr_level %u key %d", wiphy_name(priv->hw->wiphy), + "encr_level %u key %d", priv->netdev->name, m->privacy_invoked, m->wep_default_key_id, m->wep_key_mapping_len, m->exclude_unencrypted, le32_to_cpu(m->wep_icv_error_count), @@ -1063,55 +1114,12 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) for (i = 0; i < WEP_KEYS; i++) at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s", - wiphy_name(priv->hw->wiphy), i, + priv->netdev->name, i, hex2str(m->wep_default_keyvalue[i], key_len)); exit: kfree(m); } -static void at76_dump_mib_mac_encryption(struct at76_priv *priv) -{ - int i; - int ret; - /*int key_len;*/ - struct mib_mac_encryption *m; - - m = kmalloc(sizeof(struct mib_mac_encryption), GFP_KERNEL); - if (!m) - return; - - ret = at76_get_mib(priv->udev, MIB_MAC_ENCRYPTION, m, - sizeof(struct mib_mac_encryption)); - if (ret < 0) { - dev_err(&priv->udev->dev, - "%s: at76_get_mib (MAC_ENCRYPTION) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto exit; - } - - at76_dbg(DBG_MIB, - "%s: MIB MAC_ENCRYPTION: tkip_bssid %s priv_invoked %u " - "ciph_key_id %u grp_key_id %u excl_unencr %u " - "ckip_key_perm %u wep_icv_err %u wep_excluded %u", - wiphy_name(priv->hw->wiphy), mac2str(m->tkip_bssid), - m->privacy_invoked, m->cipher_default_key_id, - m->cipher_default_group_key_id, m->exclude_unencrypted, - m->ckip_key_permutation, - le32_to_cpu(m->wep_icv_error_count), - le32_to_cpu(m->wep_excluded_count)); - - /*key_len = (m->encryption_level == 1) ? - WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;*/ - - for (i = 0; i < CIPHER_KEYS; i++) - at76_dbg(DBG_MIB, "%s: MIB MAC_ENCRYPTION: key %d: %s", - wiphy_name(priv->hw->wiphy), i, - hex2str(m->cipher_default_keyvalue[i], - CIPHER_KEY_LEN)); -exit: - kfree(m); -} - static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) { int ret; @@ -1125,7 +1133,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) sizeof(struct mib_mac_mgmt)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1136,7 +1144,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) "pm_mode %d ibss_change %d res %d " "multi_domain_capability_implemented %d " "international_roaming %d country_string %.3s", - wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period), + priv->netdev->name, le16_to_cpu(m->beacon_period), le16_to_cpu(m->CFP_max_duration), le16_to_cpu(m->medium_occupancy_limit), le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), @@ -1161,7 +1169,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1171,8 +1179,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) "scan_type %d scan_channel %d probe_delay %u " "min_channel_time %d max_channel_time %d listen_int %d " "desired_ssid %s desired_bssid %s desired_bsstype %d", - wiphy_name(priv->hw->wiphy), - le32_to_cpu(m->max_tx_msdu_lifetime), + priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime), le32_to_cpu(m->max_rx_lifetime), le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold), le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax), @@ -1198,7 +1205,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } @@ -1207,7 +1214,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) "mpdu_max_length %d cca_mode_supported %d operation_rate_set " "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d " "phy_type %d current_reg_domain %d", - wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold), + priv->netdev->name, le32_to_cpu(m->ed_threshold), le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time), le16_to_cpu(m->preamble_length), le16_to_cpu(m->plcp_header_length), @@ -1231,14 +1238,13 @@ static void at76_dump_mib_local(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d " "txautorate_fallback %d ssid_size %d promiscuous_mode %d " - "preamble_type %d", wiphy_name(priv->hw->wiphy), - m->beacon_enable, + "preamble_type %d", priv->netdev->name, m->beacon_enable, m->txautorate_fallback, m->ssid_size, m->promiscuous_mode, m->preamble_type); exit: @@ -1257,21 +1263,118 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv) sizeof(struct mib_mdomain)); if (ret < 0) { printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); goto exit; } at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->channel_list, sizeof(m->channel_list))); at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s", - wiphy_name(priv->hw->wiphy), + priv->netdev->name, hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel))); exit: kfree(m); } +static int at76_get_current_bssid(struct at76_priv *priv) +{ + int ret = 0; + struct mib_mac_mgmt *mac_mgmt = + kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL); + + if (!mac_mgmt) { + ret = -ENOMEM; + goto exit; + } + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto error; + } + memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN); + printk(KERN_INFO "%s: using BSSID %s\n", priv->netdev->name, + mac2str(priv->bssid)); +error: + kfree(mac_mgmt); +exit: + return ret; +} + +static int at76_get_current_channel(struct at76_priv *priv) +{ + int ret = 0; + struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL); + + if (!phy) { + ret = -ENOMEM; + goto exit; + } + ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n", + priv->netdev->name, ret); + goto error; + } + priv->channel = phy->channel_id; +error: + kfree(phy); +exit: + return ret; +} + +/** + * at76_start_scan - start a scan + * + * @use_essid - use the configured ESSID in non passive mode + */ +static int at76_start_scan(struct at76_priv *priv, int use_essid) +{ + struct at76_req_scan scan; + + memset(&scan, 0, sizeof(struct at76_req_scan)); + memset(scan.bssid, 0xff, ETH_ALEN); + + if (use_essid) { + memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE); + scan.essid_size = priv->essid_size; + } else + scan.essid_size = 0; + + /* jal: why should we start at a certain channel? we do scan the whole + range allowed by reg domain. */ + scan.channel = priv->channel; + + /* atmelwlandriver differs between scan type 0 and 1 (active/passive) + For ad-hoc mode, it uses type 0 only. */ + scan.scan_type = priv->scan_mode; + + /* INFO: For probe_delay, not multiplying by 1024 as this will be + slightly less than min_channel_time + (per spec: probe delay < min. channel time) */ + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); + scan.international_scan = 0; + + /* other values are set to 0 for type 0 */ + + at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, " + "channel = %d, probe_delay = %d, scan_min_time = %d, " + "scan_max_time = %d)", + priv->netdev->name, use_essid, + scan.international_scan, scan.channel, + le16_to_cpu(scan.probe_delay), + le16_to_cpu(scan.min_channel_time), + le16_to_cpu(scan.max_channel_time)); + + return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); +} + /* Enable monitor mode */ static int at76_start_monitor(struct at76_priv *priv) { @@ -1292,6 +1395,86 @@ static int at76_start_monitor(struct at76_priv *priv) return ret; } +static int at76_start_ibss(struct at76_priv *priv) +{ + struct at76_req_ibss bss; + int ret; + + WARN_ON(priv->mac_state != MAC_OWN_IBSS); + if (priv->mac_state != MAC_OWN_IBSS) + return -EBUSY; + + memset(&bss, 0, sizeof(struct at76_req_ibss)); + memset(bss.bssid, 0xff, ETH_ALEN); + memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE); + bss.essid_size = priv->essid_size; + bss.bss_type = ADHOC_MODE; + bss.channel = priv->channel; + + ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss, + sizeof(struct at76_req_ibss)); + if (ret < 0) { + printk(KERN_ERR "%s: start_ibss failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_wait_completion(priv, CMD_START_IBSS); + if (ret != CMD_STATUS_COMPLETE) { + printk(KERN_ERR "%s: start_ibss failed to complete, %d\n", + priv->netdev->name, ret); + return ret; + } + + ret = at76_get_current_bssid(priv); + if (ret < 0) + return ret; + + ret = at76_get_current_channel(priv); + if (ret < 0) + return ret; + + /* not sure what this is good for ??? */ + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) { + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + return ret; + } + + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + return 0; +} + +/* Request card to join BSS in managed or ad-hoc mode */ +static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr) +{ + struct at76_req_join join; + + BUG_ON(!ptr); + + memset(&join, 0, sizeof(struct at76_req_join)); + memcpy(join.bssid, ptr->bssid, ETH_ALEN); + memcpy(join.essid, ptr->ssid, ptr->ssid_len); + join.essid_size = ptr->ssid_len; + join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2); + join.channel = ptr->channel; + join.timeout = cpu_to_le16(2000); + + at76_dbg(DBG_PROGRESS, + "%s join addr %s ssid %s type %d ch %d timeout %d", + priv->netdev->name, mac2str(join.bssid), join.essid, + join.bss_type, join.channel, le16_to_cpu(join.timeout)); + return at76_set_card_command(priv->udev, CMD_JOIN, &join, + sizeof(struct at76_req_join)); +} + /* Calculate padding from txbuf->wlength (which excludes the USB TX header), likely to compensate a flaw in the AT76C503A USB part ... */ static inline int at76_calc_padding(int wlen) @@ -1310,6 +1493,14 @@ static inline int at76_calc_padding(int wlen) return 0; } +/* We are doing a lot of things here in an interrupt. Need + a bh handler (Watching TV with a TV card is probably + a good test: if you see flickers, we are doing too much. + Currently I do see flickers... even with our tasklet :-( ) + Maybe because the bttv driver and usb-uhci use the same interrupt +*/ +/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't + * solve everything.. (alex) */ static void at76_rx_callback(struct urb *urb) { struct at76_priv *priv = urb->context; @@ -1319,6 +1510,1758 @@ static void at76_rx_callback(struct urb *urb) return; } +static void at76_tx_callback(struct urb *urb) +{ + struct at76_priv *priv = urb->context; + struct net_device_stats *stats = &priv->stats; + unsigned long flags; + struct at76_tx_buffer *mgmt_buf; + int ret; + + switch (urb->status) { + case 0: + stats->tx_packets++; + break; + case -ENOENT: + case -ECONNRESET: + /* urb has been unlinked */ + return; + default: + at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", + __func__, urb->status); + stats->tx_errors++; + break; + } + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + mgmt_buf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (!mgmt_buf) { + netif_wake_queue(priv->netdev); + return; + } + + /* we don't copy the padding bytes, but add them + to the length */ + memcpy(priv->bulk_out_buffer, mgmt_buf, + le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(mgmt_buf); +} + +/* Send a management frame on bulk-out. txbuf->wlength must be set */ +static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf) +{ + unsigned long flags; + int ret; + int urb_status; + void *oldbuf = NULL; + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + + urb_status = priv->tx_urb->status; + if (urb_status == -EINPROGRESS) { + /* cannot transmit now, put in the queue */ + oldbuf = priv->next_mgmt_bulk; + priv->next_mgmt_bulk = txbuf; + } + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); + + if (oldbuf) { + /* a data/mgmt tx is already pending in the URB - + if this is no error in some situations we must + implement a queue or silently modify the old msg */ + printk(KERN_ERR "%s: removed pending mgmt buffer %s\n", + priv->netdev->name, hex2str(oldbuf, 64)); + kfree(oldbuf); + return 0; + } + + txbuf->tx_rate = TX_RATE_1MBIT; + txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength)); + memset(txbuf->reserved, 0, sizeof(txbuf->reserved)); + + if (priv->next_mgmt_bulk) + printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n", + priv->netdev->name, urb_status); + + at76_dbg(DBG_TX_MGMT, + "%s: tx mgmt: wlen %d tx_rate %d pad %d %s", + priv->netdev->name, le16_to_cpu(txbuf->wlength), + txbuf->tx_rate, txbuf->padding, + hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength))); + + /* txbuf was not consumed above -> send mgmt msg immediately */ + memcpy(priv->bulk_out_buffer, txbuf, + le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, + priv->bulk_out_buffer, + le16_to_cpu(txbuf->wlength) + txbuf->padding + + AT76_TX_HDRLEN, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + priv->netdev->name, ret); + + kfree(txbuf); + + return ret; +} + +/* Go to the next information element */ +static inline void next_ie(struct ieee80211_info_element **ie) +{ + *ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]); +} + +/* Challenge is the challenge string (in TLV format) + we got with seq_nr 2 for shared secret authentication only and + send in seq_nr 3 WEP encrypted to prove we have the correct WEP key; + otherwise it is NULL */ +static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss, + int seq_nr, struct ieee80211_info_element *challenge) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_auth *req; + int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE : + AUTH_FRAME_SIZE + 1 + 1 + challenge->len); + + BUG_ON(!bss); + BUG_ON(seq_nr == 3 && !challenge); + tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_auth *)tx_buffer->packet; + mgmt = &req->header; + + /* make wireless header */ + /* first auth msg is not encrypted, only the second (seq_nr == 3) */ + mgmt->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH | + (seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0)); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + req->algorithm = cpu_to_le16(priv->auth_mode); + req->transaction = cpu_to_le16(seq_nr); + req->status = cpu_to_le16(0); + + if (seq_nr == 3) + memcpy(req->info_element, challenge, 1 + 1 + challenge->len); + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN); + at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %s alg %d seq_nr %d", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction)); + if (seq_nr == 3) + at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...", + priv->netdev->name, hex2str(req->info_element, 18)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss) +{ + struct at76_tx_buffer *tx_buffer; + struct ieee80211_hdr_3addr *mgmt; + struct ieee80211_assoc_request *req; + struct ieee80211_info_element *ie; + char *essid; + int essid_len; + u16 capa; + + BUG_ON(!bss); + + tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC); + if (!tx_buffer) + return -ENOMEM; + + req = (struct ieee80211_assoc_request *)tx_buffer->packet; + mgmt = &req->header; + ie = req->info_element; + + /* make wireless header */ + mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ASSOC_REQ); + + mgmt->duration_id = cpu_to_le16(0x8000); + memcpy(mgmt->addr1, bss->bssid, ETH_ALEN); + memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN); + memcpy(mgmt->addr3, bss->bssid, ETH_ALEN); + mgmt->seq_ctl = cpu_to_le16(0); + + /* we must set the Privacy bit in the capabilities to assure an + Agere-based AP with optional WEP transmits encrypted frames + to us. AP only set the Privacy bit in their capabilities + if WEP is mandatory in the BSS! */ + capa = bss->capa; + if (priv->wep_enabled) + capa |= WLAN_CAPABILITY_PRIVACY; + if (priv->preamble_type != PREAMBLE_TYPE_LONG) + capa |= WLAN_CAPABILITY_SHORT_PREAMBLE; + req->capability = cpu_to_le16(capa); + + req->listen_interval = cpu_to_le16(2 * bss->beacon_interval); + + /* write TLV data elements */ + + ie->id = MFIE_TYPE_SSID; + ie->len = bss->ssid_len; + memcpy(ie->data, bss->ssid, bss->ssid_len); + next_ie(&ie); + + ie->id = MFIE_TYPE_RATES; + ie->len = sizeof(hw_rates); + memcpy(ie->data, hw_rates, sizeof(hw_rates)); + next_ie(&ie); /* ie points behind the supp_rates field */ + + /* init. at76_priv tx header */ + tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt); + + ie = req->info_element; + essid = ie->data; + essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); + + next_ie(&ie); /* points to IE of rates now */ + at76_dbg(DBG_TX_MGMT, + "%s: AssocReq bssid %s capa 0x%04x ssid %.*s rates %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(req->capability), essid_len, essid, + hex2str(ie->data, ie->len)); + + /* either send immediately (if no data tx is pending + or put it in pending list */ + return at76_tx_mgmt(priv, tx_buffer); +} + +/* We got to check the bss_list for old entries */ +static void at76_bss_list_timeout(unsigned long par) +{ + struct at76_priv *priv = (struct at76_priv *)par; + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *ptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + + ptr = list_entry(lptr, struct bss_info, list); + + if (ptr != priv->curr_bss + && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) { + at76_dbg(DBG_BSS_TABLE_RM, + "%s: bss_list: removing old BSS %s ch %d", + priv->netdev->name, mac2str(ptr->bssid), + ptr->channel); + list_del(&ptr->list); + kfree(ptr); + } + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + /* restart the timer */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); +} + +static inline void at76_set_mac_state(struct at76_priv *priv, + enum mac_state mac_state) +{ + at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name, + mac_states[mac_state]); + priv->mac_state = mac_state; +} + +static void at76_dump_bss_table(struct at76_priv *priv) +{ + struct bss_info *ptr; + unsigned long flags; + struct list_head *lptr; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name, + priv->curr_bss); + + list_for_each(lptr, &priv->bss_list) { + ptr = list_entry(lptr, struct bss_info, list); + at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %s channel %d ssid %.*s " + "(%s) capa 0x%04x rates %s rssi %d link %d noise %d", + ptr, mac2str(ptr->bssid), ptr->channel, ptr->ssid_len, + ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len), + ptr->capa, hex2str(ptr->rates, ptr->rates_len), + ptr->rssi, ptr->link_qual, ptr->noise_level); + } + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); +} + +/* Called upon successful association to mark interface as connected */ +static void at76_work_assoc_done(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_assoc_done); + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_ASSOC); + WARN_ON(!priv->curr_bss); + if (priv->mac_state != MAC_ASSOC || !priv->curr_bss) + goto exit; + + if (priv->iw_mode == IW_MODE_INFRA) { + if (priv->pm_mode != AT76_PM_OFF) { + /* calculate the listen interval in units of + beacon intervals of the curr_bss */ + u32 pm_period_beacon = (priv->pm_period >> 10) / + priv->curr_bss->beacon_interval; + + pm_period_beacon = max(pm_period_beacon, 2u); + pm_period_beacon = min(pm_period_beacon, 0xffffu); + + at76_dbg(DBG_PM, + "%s: pm_mode %d assoc id 0x%x listen int %d", + priv->netdev->name, priv->pm_mode, + priv->assoc_id, pm_period_beacon); + + at76_set_associd(priv, priv->assoc_id); + at76_set_listen_interval(priv, (u16)pm_period_beacon); + } + schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT); + } + at76_set_pm_mode(priv); + + netif_carrier_on(priv->netdev); + netif_wake_queue(priv->netdev); + at76_set_mac_state(priv, MAC_CONNECTED); + at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid); + at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %s", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + +exit: + mutex_unlock(&priv->mtx); +} + +/* We only store the new mac address in netdev struct, + it gets set when the netdev is opened. */ +static int at76_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *mac = addr; + memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN); + return 1; +} + +static struct net_device_stats *at76_get_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return &priv->stats; +} + +static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d", + priv->wstats.qual.qual, priv->wstats.qual.level, + priv->wstats.qual.noise, priv->wstats.qual.updated); + + return &priv->wstats; +} + +static void at76_set_multicast(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int promisc; + + promisc = ((netdev->flags & IFF_PROMISC) != 0); + if (promisc != priv->promisc) { + /* This gets called in interrupt, must reschedule */ + priv->promisc = promisc; + schedule_work(&priv->work_set_promisc); + } +} + +/* Stop all network activity, flush all pending tasks */ +static void at76_quiesce(struct at76_priv *priv) +{ + unsigned long flags; + + netif_stop_queue(priv->netdev); + netif_carrier_off(priv->netdev); + + at76_set_mac_state(priv, MAC_INIT); + + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + cancel_delayed_work(&priv->dwork_restart); + + spin_lock_irqsave(&priv->mgmt_spinlock, flags); + kfree(priv->next_mgmt_bulk); + priv->next_mgmt_bulk = NULL; + spin_unlock_irqrestore(&priv->mgmt_spinlock, flags); +} + +/******************************************************************************* + * at76_priv implementations of iw_handler functions: + */ +static int at76_iw_handler_commit(struct net_device *netdev, + struct iw_request_info *info, + void *null, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name, + __func__); + + if (priv->mac_state != MAC_INIT) + at76_quiesce(priv); + + /* Wait half second before the restart to process subsequent + * requests from the same iwconfig in a single restart */ + schedule_delayed_work(&priv->dwork_restart, HZ / 2); + + return 0; +} + +static int at76_iw_handler_get_name(struct net_device *netdev, + struct iw_request_info *info, + char *name, char *extra) +{ + strcpy(name, "IEEE 802.11b"); + at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name); + return 0; +} + +static int at76_iw_handler_set_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int chan = -1; + int ret = -EIWCOMMIT; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d", + netdev->name, freq->m, freq->e); + + if ((freq->e == 0) && (freq->m <= 1000)) + /* Setting by channel number */ + chan = freq->m; + else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - freq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) { + if (freq->m == (channel_frequency[i] * mult)) + chan = i + 1; + } + } + + if (chan < 1 || !priv->domain) + /* non-positive channels are invalid + * we need a domain info to set the channel + * either that or an invalid frequency was + * provided by the user */ + ret = -EINVAL; + else if (!(priv->domain->channel_map & (1 << (chan - 1)))) { + printk(KERN_INFO "%s: channel %d not allowed for domain %s\n", + priv->netdev->name, chan, priv->domain->name); + ret = -EINVAL; + } + + if (ret == -EIWCOMMIT) { + priv->channel = chan; + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name, + chan); + } + + return ret; +} + +static int at76_iw_handler_get_freq(struct net_device *netdev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + freq->m = priv->channel; + freq->e = 0; + + if (priv->channel) + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d", + netdev->name, channel_frequency[priv->channel - 1], 6); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name, + priv->channel); + + return 0; +} + +static int at76_iw_handler_set_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode); + + if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) && + (*mode != IW_MODE_MONITOR)) + return -EINVAL; + + priv->iw_mode = *mode; + if (priv->iw_mode != IW_MODE_INFRA) + priv->pm_mode = AT76_PM_OFF; + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_mode(struct net_device *netdev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + *mode = priv->iw_mode; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode); + + return 0; +} + +static int at76_iw_handler_get_range(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + /* inspired by atmel.c */ + struct at76_priv *priv = netdev_priv(netdev); + struct iw_range *range = (struct iw_range *)extra; + int i; + + data->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + /* TODO: range->throughput = xxxxxx; */ + + range->min_nwid = 0x0000; + range->max_nwid = 0x0000; + + /* this driver doesn't maintain sensitivity information */ + range->sensitivity = 0; + + range->max_qual.qual = 100; + range->max_qual.level = 100; + range->max_qual.noise = 0; + range->max_qual.updated = IW_QUAL_NOISE_INVALID; + + range->avg_qual.qual = 50; + range->avg_qual.level = 50; + range->avg_qual.noise = 0; + range->avg_qual.updated = IW_QUAL_NOISE_INVALID; + + range->bitrate[0] = 1000000; + range->bitrate[1] = 2000000; + range->bitrate[2] = 5500000; + range->bitrate[3] = 11000000; + range->num_bitrates = 4; + + range->min_rts = 0; + range->max_rts = MAX_RTS_THRESHOLD; + + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_ON; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R; + + range->encoding_size[0] = WEP_SMALL_KEY_LEN; + range->encoding_size[1] = WEP_LARGE_KEY_LEN; + range->num_encoding_sizes = 2; + range->max_encoding_tokens = WEP_KEYS; + + /* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power + - take this for all (ignore antenna gains) */ + range->txpower[0] = 15; + range->num_txpower = 1; + range->txpower_capa = IW_TXPOW_DBM; + + range->we_version_source = WIRELESS_EXT; + range->we_version_compiled = WIRELESS_EXT; + + /* same as the values used in atmel.c */ + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = 0; + range->min_retry = 1; + range->max_retry = 255; + + range->num_channels = NUM_CHANNELS; + range->num_frequency = 0; + + for (i = 0; i < NUM_CHANNELS; i++) { + /* test if channel map bit is raised */ + if (priv->domain->channel_map & (0x1 << i)) { + range->num_frequency += 1; + + range->freq[i].i = i + 1; + range->freq[i].m = channel_frequency[i] * 100000; + range->freq[i].e = 1; /* freq * 10^1 */ + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name); + + return 0; +} + +static int at76_iw_handler_set_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_spy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_spy(priv->netdev, info, + (union iwreq_data *)data, extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + return ret; +} + +static int at76_iw_handler_get_thrspy(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret; + + spin_lock_bh(&priv->spy_spinlock); + ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data, + extra); + spin_unlock_bh(&priv->spy_spinlock); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)", + netdev->name, data->length); + + return ret; +} + +static int at76_iw_handler_set_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + /* if the incoming address == ff:ff:ff:ff:ff:ff, the user has + chosen any or auto AP preference */ + if (is_broadcast_ether_addr(ap_addr->sa_data) + || is_zero_ether_addr(ap_addr->sa_data)) + priv->wanted_bssid_valid = 0; + else { + /* user wants to set a preferred AP address */ + priv->wanted_bssid_valid = 1; + memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN); + } + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_wap(struct net_device *netdev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %s", netdev->name, + mac2str(ap_addr->sa_data)); + + return 0; +} + +static int at76_iw_handler_set_scan(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + if (!netif_running(netdev)) { + ret = -ENETDOWN; + goto exit; + } + + /* jal: we don't allow "iwlist ethX scan" while we are + in monitor mode */ + if (priv->iw_mode == IW_MODE_MONITOR) { + ret = -EBUSY; + goto exit; + } + + /* Discard old scan results */ + if ((jiffies - priv->last_scan) > (20 * HZ)) + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + /* Initiate a scan command */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + ret = -EBUSY; + goto exit; + } + + priv->scan_state = SCAN_IN_PROGRESS; + + at76_quiesce(priv); + + /* Try to do passive or active scan if WE asks as. */ + if (wrqu->data.length + && wrqu->data.length == sizeof(struct iw_scan_req)) { + struct iw_scan_req *req = (struct iw_scan_req *)extra; + + if (req->scan_type == IW_SCAN_TYPE_PASSIVE) + priv->scan_mode = SCAN_TYPE_PASSIVE; + else if (req->scan_type == IW_SCAN_TYPE_ACTIVE) + priv->scan_mode = SCAN_TYPE_ACTIVE; + + /* Sanity check values? */ + if (req->min_channel_time > 0) + priv->scan_min_time = req->min_channel_time; + + if (req->max_channel_time > 0) + priv->scan_max_time = req->max_channel_time; + } + + /* change to scanning state */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); + return ret; +} + +static int at76_iw_handler_get_scan(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + unsigned long flags; + struct list_head *lptr, *nptr; + struct bss_info *curr_bss; + struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL); + char *curr_val, *curr_pos = extra; + int i; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name); + + if (!iwe) + return -ENOMEM; + + if (priv->scan_state != SCAN_COMPLETED) { + /* scan not yet finished */ + kfree(iwe); + return -EAGAIN; + } + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + + list_for_each_safe(lptr, nptr, &priv->bss_list) { + curr_bss = list_entry(lptr, struct bss_info, list); + + iwe->cmd = SIOCGIWAP; + iwe->u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6); + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_ADDR_LEN); + + iwe->u.data.length = curr_bss->ssid_len; + iwe->cmd = SIOCGIWESSID; + iwe->u.data.flags = 1; + + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + curr_bss->ssid); + + iwe->cmd = SIOCGIWMODE; + iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ? + IW_MODE_ADHOC : + (curr_bss->capa & WLAN_CAPABILITY_ESS) ? + IW_MODE_MASTER : IW_MODE_AUTO; + /* IW_MODE_AUTO = 0 which I thought is + * the most logical value to return in this case */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_UINT_LEN); + + iwe->cmd = SIOCGIWFREQ; + iwe->u.freq.m = curr_bss->channel; + iwe->u.freq.e = 0; + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_FREQ_LEN); + + iwe->cmd = SIOCGIWENCODE; + if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY) + iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe->u.data.flags = IW_ENCODE_DISABLED; + + iwe->u.data.length = 0; + curr_pos = iwe_stream_add_point(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + NULL); + + /* Add quality statistics */ + iwe->cmd = IWEVQUAL; + iwe->u.qual.noise = 0; + iwe->u.qual.updated = + IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED; + iwe->u.qual.level = (curr_bss->rssi * 100 / 42); + if (iwe->u.qual.level > 100) + iwe->u.qual.level = 100; + if (at76_is_intersil(priv->board_type)) + iwe->u.qual.qual = curr_bss->link_qual; + else { + iwe->u.qual.qual = 0; + iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID; + } + /* Add new value to event */ + curr_pos = iwe_stream_add_event(info, curr_pos, + extra + IW_SCAN_MAX_DATA, iwe, + IW_EV_QUAL_LEN); + + /* Rate: stuffing multiple values in a single event requires + * a bit more of magic - Jean II */ + curr_val = curr_pos + IW_EV_LCP_LEN; + + iwe->cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe->u.bitrate.fixed = 0; + iwe->u.bitrate.disabled = 0; + /* Max 8 values */ + for (i = 0; i < curr_bss->rates_len; i++) { + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe->u.bitrate.value = + ((curr_bss->rates[i] & 0x7f) * 500000); + /* Add new value to event */ + curr_val = iwe_stream_add_value(info, curr_pos, + curr_val, + extra + + IW_SCAN_MAX_DATA, iwe, + IW_EV_PARAM_LEN); + } + + /* Check if we added any event */ + if ((curr_val - curr_pos) > IW_EV_LCP_LEN) + curr_pos = curr_val; + + /* more information may be sent back using IWECUSTOM */ + + } + + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + data->length = (curr_pos - extra); + data->flags = 0; + + kfree(iwe); + return 0; +} + +static int at76_iw_handler_set_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra); + + if (data->flags) { + memcpy(priv->essid, extra, data->length); + priv->essid_size = data->length; + } else + priv->essid_size = 0; /* Use any SSID */ + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_essid(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (priv->essid_size) { + /* not the ANY ssid in priv->essid */ + data->flags = 1; + data->length = priv->essid_size; + memcpy(extra, priv->essid, data->length); + } else { + /* the ANY ssid was specified */ + if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) { + /* report the SSID we have found */ + data->flags = 1; + data->length = priv->curr_bss->ssid_len; + memcpy(extra, priv->curr_bss->ssid, data->length); + } else { + /* report ANY back */ + data->flags = 0; + data->length = 0; + } + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name, + data->length, extra); + + return 0; +} + +static int at76_iw_handler_set_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name, + bitrate->value); + + switch (bitrate->value) { + case -1: + priv->txrate = TX_RATE_AUTO; + break; /* auto rate */ + case 1000000: + priv->txrate = TX_RATE_1MBIT; + break; + case 2000000: + priv->txrate = TX_RATE_2MBIT; + break; + case 5500000: + priv->txrate = TX_RATE_5_5MBIT; + break; + case 11000000: + priv->txrate = TX_RATE_11MBIT; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int at76_iw_handler_get_rate(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *bitrate, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + switch (priv->txrate) { + /* return max rate if RATE_AUTO */ + case TX_RATE_AUTO: + bitrate->value = 11000000; + break; + case TX_RATE_1MBIT: + bitrate->value = 1000000; + break; + case TX_RATE_2MBIT: + bitrate->value = 2000000; + break; + case TX_RATE_5_5MBIT: + bitrate->value = 5500000; + break; + case TX_RATE_11MBIT: + bitrate->value = 11000000; + break; + default: + ret = -EINVAL; + } + + bitrate->fixed = (priv->txrate != TX_RATE_AUTO); + bitrate->disabled = 0; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name, + bitrate->value); + + return ret; +} + +static int at76_iw_handler_set_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int rthr = rts->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + if (rts->disabled) + rthr = MAX_RTS_THRESHOLD; + + if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD)) + ret = -EINVAL; + else + priv->rts_threshold = rthr; + + return ret; +} + +static int at76_iw_handler_get_rts(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *rts, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + rts->value = priv->rts_threshold; + rts->disabled = (rts->value >= MAX_RTS_THRESHOLD); + rts->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s", + netdev->name, rts->value, (rts->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_set_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + int fthr = frag->value; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + if (frag->disabled) + fthr = MAX_FRAG_THRESHOLD; + + if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD)) + ret = -EINVAL; + else + priv->frag_threshold = fthr & ~0x1; /* get an even value */ + + return ret; +} + +static int at76_iw_handler_get_frag(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *frag, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + frag->value = priv->frag_threshold; + frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD); + frag->fixed = 1; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s", + netdev->name, frag->value, + (frag->disabled) ? "true" : "false"); + + return 0; +} + +static int at76_iw_handler_get_txpow(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + power->value = 15; + power->fixed = 1; /* No power control */ + power->disabled = 0; + power->flags = IW_TXPOW_DBM; + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name, + power->value); + + return 0; +} + +/* jal: short retry is handled by the firmware (at least 0.90.x), + while long retry is not (?) */ +static int at76_iw_handler_set_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d", + netdev->name, retry->disabled, retry->flags, retry->value); + + if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) { + if ((retry->flags & IW_RETRY_MIN) || + !(retry->flags & IW_RETRY_MAX)) + priv->short_retry_limit = retry->value; + else + ret = -EINVAL; + } else + ret = -EINVAL; + + return ret; +} + +/* Adapted (ripped) from atmel.c */ +static int at76_iw_handler_get_retry(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *retry, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name); + + retry->disabled = 0; /* Can't be disabled */ + retry->flags = IW_RETRY_LIMIT; + retry->value = priv->short_retry_limit; + + return 0; +} + +static int at76_iw_handler_set_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + int len = encoding->length; + + at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d " + "auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id, + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + /* take the old default key if index is invalid */ + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + if (len > 0) { + if (len > WEP_LARGE_KEY_LEN) + len = WEP_LARGE_KEY_LEN; + + memset(priv->wep_keys[index], 0, WEP_KEY_LEN); + memcpy(priv->wep_keys[index], extra, len); + priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ? + WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN; + priv->wep_enabled = 1; + } + + priv->wep_key_id = index; + priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0); + + if (encoding->flags & IW_ENCODE_RESTRICTED) + priv->auth_mode = WLAN_AUTH_SHARED_KEY; + if (encoding->flags & IW_ENCODE_OPEN) + priv->auth_mode = WLAN_AUTH_OPEN; + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return -EIWCOMMIT; +} + +static int at76_iw_handler_get_encode(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *encoding, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int index = (encoding->flags & IW_ENCODE_INDEX) - 1; + + if ((index < 0) || (index >= WEP_KEYS)) + index = priv->wep_key_id; + + encoding->flags = + (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ? + IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; + + if (!priv->wep_enabled) + encoding->flags |= IW_ENCODE_DISABLED; + + if (encoding->pointer) { + encoding->length = priv->wep_keys_len[index]; + + memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]); + + encoding->flags |= (index + 1); + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x " + "pointer %p len %d", netdev->name, encoding->flags, + encoding->pointer, encoding->length); + at76_dbg(DBG_IOCTL, + "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d " + "key_len %d auth_mode %s", netdev->name, + (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1, + priv->wep_keys_len[priv->wep_key_id], + (priv->auth_mode == + WLAN_AUTH_SHARED_KEY) ? "restricted" : "open"); + + return 0; +} + +static int at76_iw_handler_set_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *prq, char *extra) +{ + int err = -EIWCOMMIT; + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_IOCTL, + "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x", + netdev->name, (prq->disabled) ? "true" : "false", prq->flags, + prq->value); + + if (prq->disabled) + priv->pm_mode = AT76_PM_OFF; + else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_ALL_R: + case IW_POWER_ON: + break; + default: + err = -EINVAL; + goto exit; + } + if (prq->flags & IW_POWER_PERIOD) + priv->pm_period = prq->value; + + if (prq->flags & IW_POWER_TIMEOUT) { + err = -EINVAL; + goto exit; + } + priv->pm_mode = AT76_PM_ON; + } +exit: + return err; +} + +static int at76_iw_handler_get_power(struct net_device *netdev, + struct iw_request_info *info, + struct iw_param *power, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + power->disabled = (priv->pm_mode == AT76_PM_OFF); + if (!power->disabled) { + power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R; + power->value = priv->pm_period; + } + + at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x", + netdev->name, power->disabled ? "disabled" : "enabled", + power->flags, power->value); + + return 0; +} + +/******************************************************************************* + * Private IOCTLS + */ +static int at76_iw_set_short_preamble(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d", + netdev->name, val); + + if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO) + ret = -EINVAL; + else + priv->preamble_type = val; + + return ret; +} + +static int at76_iw_get_short_preamble(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + + snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)", + preambles[priv->preamble_type], priv->preamble_type); + return 0; +} + +static int at76_iw_set_debug(struct net_device *netdev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + char *ptr; + u32 val; + + if (data->length > 0) { + val = simple_strtol(extra, &ptr, 0); + + if (ptr == extra) + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x", + netdev->name, data->length, extra, val); + } else + val = DBG_DEFAULTS; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x", + netdev->name, at76_debug, val); + + /* jal: some more output to pin down lockups */ + at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d " + "carrier_ok %d", netdev->name, netif_running(netdev), + netif_queue_stopped(netdev), netif_carrier_ok(netdev)); + + at76_debug = val; + + return 0; +} + +static int at76_iw_get_debug(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug); + return 0; +} + +static int at76_iw_set_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)", + netdev->name, val, + val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" : + val == AT76_PM_SMART ? "smart save" : "<invalid>"); + if (val < AT76_PM_OFF || val > AT76_PM_SMART) + ret = -EINVAL; + else + priv->pm_mode = val; + + return ret; +} + +static int at76_iw_get_powersave_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->pm_mode; + return 0; +} + +static int at76_iw_set_scan_times(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int mint = *((int *)name); + int maxt = *((int *)name + 1); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d", + netdev->name, mint, maxt); + if (mint <= 0 || maxt <= 0 || mint > maxt) + ret = -EINVAL; + else { + priv->scan_min_time = mint; + priv->scan_max_time = maxt; + } + + return ret; +} + +static int at76_iw_get_scan_times(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_min_time; + param[1] = priv->scan_max_time; + return 0; +} + +static int at76_iw_set_scan_mode(struct net_device *netdev, + struct iw_request_info *info, char *name, + char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int val = *((int *)name); + int ret = -EIWCOMMIT; + + at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s", + netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" : + (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>"); + + if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE) + ret = -EINVAL; + else + priv->scan_mode = val; + + return ret; +} + +static int at76_iw_get_scan_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct at76_priv *priv = netdev_priv(netdev); + int *param = (int *)extra; + + param[0] = priv->scan_mode; + return 0; +} + +#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f + +/* Standard wireless handlers */ +static const iw_handler at76_handlers[] = { + AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit), + AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name), + AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq), + AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq), + AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode), + AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode), + AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range), + AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy), + AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy), + AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy), + AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy), + AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap), + AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap), + AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan), + AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan), + AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid), + AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid), + AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate), + AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate), + AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts), + AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts), + AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag), + AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag), + AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow), + AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry), + AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry), + AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode), + AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode), + AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power), + AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power) +}; + +#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f + +/* Private wireless handlers */ +static const iw_handler at76_priv_handlers[] = { + AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble), + AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble), + AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug), + AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug), + AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode), + AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode), + AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times), + AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times), + AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode), + AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode), +}; + +/* Names and arguments of private wireless handlers */ +static const struct iw_priv_args at76_priv_args[] = { + /* 0 - long, 1 - short */ + {AT76_SET_SHORT_PREAMBLE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"}, + + {AT76_GET_SHORT_PREAMBLE, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"}, + + /* we must pass the new debug mask as a string, because iwpriv cannot + * parse hex numbers starting with 0x :-( */ + {AT76_SET_DEBUG, + IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"}, + + {AT76_GET_DEBUG, + 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"}, + + /* 1 - active, 2 - power save, 3 - smart power save */ + {AT76_SET_POWERSAVE_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"}, + + {AT76_GET_POWERSAVE_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"}, + + /* min_channel_time, max_channel_time */ + {AT76_SET_SCAN_TIMES, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"}, + + {AT76_GET_SCAN_TIMES, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"}, + + /* 0 - active, 1 - passive scan */ + {AT76_SET_SCAN_MODE, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"}, + + {AT76_GET_SCAN_MODE, + 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"}, +}; + +static const struct iw_handler_def at76_handler_def = { + .num_standard = ARRAY_SIZE(at76_handlers), + .num_private = ARRAY_SIZE(at76_priv_handlers), + .num_private_args = ARRAY_SIZE(at76_priv_args), + .standard = at76_handlers, + .private = at76_priv_handlers, + .private_args = at76_priv_args, + .get_wireless_stats = at76_get_wireless_stats, +}; + +static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 }; + +/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with + * a SNAP OID of 0 (0x00, 0x00, 0x00) */ +static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; + +static int at76_tx(struct sk_buff *skb, struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + struct net_device_stats *stats = &priv->stats; + int ret = 0; + int wlen; + int submit_len; + struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)tx_buffer->packet; + u8 *payload = i802_11_hdr->payload; + struct ethhdr *eh = (struct ethhdr *)skb->data; + + if (netif_queue_stopped(netdev)) { + printk(KERN_ERR "%s: %s called while netdev is stopped\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (priv->tx_urb->status == -EINPROGRESS) { + printk(KERN_ERR "%s: %s called while tx urb is pending\n", + netdev->name, __func__); + /* skip this packet */ + dev_kfree_skb(skb); + return 0; + } + + if (skb->len < ETH_HLEN) { + printk(KERN_ERR "%s: %s: skb too short (%d)\n", + netdev->name, __func__, skb->len); + dev_kfree_skb(skb); + return 0; + } + + at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + + /* we can get rid of memcpy if we set netdev->hard_header_len to + reserve enough space, but we would need to keep the skb around */ + + if (ntohs(eh->h_proto) <= ETH_DATA_LEN) { + /* this is a 802.3 packet */ + if (skb->len >= ETH_HLEN + sizeof(rfc1042sig) + && skb->data[ETH_HLEN] == rfc1042sig[0] + && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) { + /* higher layer delivered SNAP header - keep it */ + memcpy(payload, skb->data + ETH_HLEN, + skb->len - ETH_HLEN); + wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN; + } else { + printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet " + "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n", + priv->netdev->name, skb->data[ETH_HLEN], + skb->data[ETH_HLEN + 1], + skb->data[ETH_HLEN + 2]); + dev_kfree_skb(skb); + return 0; + } + } else { + /* add RFC 1042 header in front */ + memcpy(payload, rfc1042sig, sizeof(rfc1042sig)); + memcpy(payload + sizeof(rfc1042sig), &eh->h_proto, + skb->len - offsetof(struct ethhdr, h_proto)); + wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len - + offsetof(struct ethhdr, h_proto); + } + + /* make wireless header */ + i802_11_hdr->frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_DATA | + (priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) | + (priv->iw_mode == + IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0)); + + if (priv->iw_mode == IW_MODE_ADHOC) { + memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN); + } else if (priv->iw_mode == IW_MODE_INFRA) { + memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN); + memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN); + memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN); + } + + i802_11_hdr->duration_id = cpu_to_le16(0); + i802_11_hdr->seq_ctl = cpu_to_le16(0); + + /* setup 'Atmel' header */ + tx_buffer->wlength = cpu_to_le16(wlen); + tx_buffer->tx_rate = priv->txrate; + /* for broadcast destination addresses, the firmware 0.100.x + seems to choose the highest rate set with CMD_STARTUP in + basic_rate_set replacing this value */ + + memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); + + tx_buffer->padding = at76_calc_padding(wlen); + submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding; + + at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name, + hex2str(skb->data, 32)); + at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s", + priv->netdev->name, + le16_to_cpu(tx_buffer->wlength), + tx_buffer->padding, tx_buffer->tx_rate, + hex2str(i802_11_hdr, sizeof(*i802_11_hdr))); + at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name, + hex2str(payload, 48)); + + /* send stuff */ + netif_stop_queue(netdev); + netdev->trans_start = jiffies; + + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, + submit_len, at76_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) { + stats->tx_errors++; + printk(KERN_ERR "%s: error in tx submit urb: %d\n", + netdev->name, ret); + if (ret == -EINVAL) + printk(KERN_ERR + "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", + priv->netdev->name, priv->tx_urb, + priv->tx_urb->hcpriv, priv->tx_urb->complete); + } else { + stats->tx_bytes += skb->len; + dev_kfree_skb(skb); + } + + return ret; +} + +static void at76_tx_timeout(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + if (!priv) + return; + dev_warn(&netdev->dev, "tx timeout."); + + usb_unlink_urb(priv->tx_urb); + priv->stats.tx_errors++; +} + static int at76_submit_rx_urb(struct at76_priv *priv) { int ret; @@ -1327,7 +3270,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) if (!priv->rx_urb) { printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n", - wiphy_name(priv->hw->wiphy), __func__); + priv->netdev->name, __func__); return -EFAULT; } @@ -1335,7 +3278,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) skb = dev_alloc_skb(sizeof(struct at76_rx_buffer)); if (!skb) { printk(KERN_ERR "%s: cannot allocate rx skbuff\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); ret = -ENOMEM; goto exit; } @@ -1355,18 +3298,110 @@ static int at76_submit_rx_urb(struct at76_priv *priv) "usb_submit_urb returned -ENODEV"); else printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); } exit: if (ret < 0 && ret != -ENODEV) printk(KERN_ERR "%s: cannot submit rx urb - please unload the " "driver and/or power cycle the device\n", - wiphy_name(priv->hw->wiphy)); + priv->netdev->name); return ret; } +static int at76_open(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + int ret = 0; + + at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + /* if netdev->dev_addr != priv->mac_addr we must + set the mac address in the device ! */ + if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) { + if (at76_add_mac_address(priv, netdev->dev_addr) >= 0) + at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %s", + netdev->name, mac2str(netdev->dev_addr)); + } + + priv->scan_state = SCAN_IDLE; + priv->last_scan = jiffies; + + ret = at76_submit_rx_urb(priv); + if (ret < 0) { + printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", + netdev->name, ret); + goto error; + } + + schedule_delayed_work(&priv->dwork_restart, 0); + + at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__); +error: + mutex_unlock(&priv->mtx); + return ret < 0 ? ret : 0; +} + +static int at76_stop(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + + at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__); + + if (mutex_lock_interruptible(&priv->mtx)) + return -EINTR; + + at76_quiesce(priv); + + if (!priv->device_unplugged) { + /* We are called by "ifconfig ethX down", not because the + * device is not available anymore. */ + at76_set_radio(priv, 0); + + /* We unlink rx_urb because at76_open() re-submits it. + * If unplugged, at76_delete_device() takes care of it. */ + usb_kill_urb(priv->rx_urb); + } + + /* free the bss_list */ + at76_free_bss_list(priv); + + mutex_unlock(&priv->mtx); + at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__); + + return 0; +} + +static void at76_ethtool_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + struct at76_priv *priv = netdev_priv(netdev); + + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + + usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info)); + + snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d", + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); +} + +static u32 at76_ethtool_get_link(struct net_device *netdev) +{ + struct at76_priv *priv = netdev_priv(netdev); + return priv->mac_state == MAC_CONNECTED; +} + +static struct ethtool_ops at76_ethtool_ops = { + .get_drvinfo = at76_ethtool_get_drvinfo, + .get_link = at76_ethtool_get_link, +}; + /* Download external firmware */ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe) { @@ -1463,6 +3498,406 @@ exit: return ret; } +static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr) +{ + /* common criteria for both modi */ + + int ret = (priv->essid_size == 0 /* ANY ssid */ || + (priv->essid_size == ptr->ssid_len && + !memcmp(priv->essid, ptr->ssid, ptr->ssid_len))); + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: essid didn't match", + priv->netdev->name, ptr); + return ret; +} + +static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr) +{ + int ret; + + if (priv->iw_mode == IW_MODE_ADHOC) + ret = ptr->capa & WLAN_CAPABILITY_IBSS; + else + ret = ptr->capa & WLAN_CAPABILITY_ESS; + if (!ret) + at76_dbg(DBG_BSS_MATCH, + "%s bss table entry %p: mode didn't match", + priv->netdev->name, ptr); + return ret; +} + +static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr) +{ + int i; + + for (i = 0; i < ptr->rates_len; i++) { + u8 rate = ptr->rates[i]; + + if (!(rate & 0x80)) + continue; + + /* this is a basic rate we have to support + (see IEEE802.11, ch. 7.3.2.2) */ + if (rate != (0x80 | hw_rates[0]) + && rate != (0x80 | hw_rates[1]) + && rate != (0x80 | hw_rates[2]) + && rate != (0x80 | hw_rates[3])) { + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: basic rate %02x not " + "supported", priv->netdev->name, ptr, rate); + return 0; + } + } + + /* if we use short preamble, the bss must support it */ + if (priv->preamble_type == PREAMBLE_TYPE_SHORT && + !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) { + at76_dbg(DBG_BSS_MATCH, + "%s: %p does not support short preamble", + priv->netdev->name, ptr); + return 0; + } else + return 1; +} + +static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) { + /* we have disabled WEP, but the BSS signals privacy */ + at76_dbg(DBG_BSS_MATCH, + "%s: bss table entry %p: requires encryption", + priv->netdev->name, ptr); + return 0; + } + /* otherwise if the BSS does not signal privacy it may well + accept encrypted packets from us ... */ + return 1; +} + +static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr) +{ + if (!priv->wanted_bssid_valid || + !compare_ether_addr(ptr->bssid, priv->wanted_bssid)) + return 1; + + at76_dbg(DBG_BSS_MATCH, + "%s: requested bssid - %s does not match", + priv->netdev->name, mac2str(priv->wanted_bssid)); + at76_dbg(DBG_BSS_MATCH, + " AP bssid - %s of bss table entry %p", + mac2str(ptr->bssid), ptr); + return 0; +} + +/** + * at76_match_bss - try to find a matching bss in priv->bss + * + * last - last bss tried + * + * last == NULL signals a new round starting with priv->bss_list.next + * this function must be called inside an acquired priv->bss_list_spinlock + * otherwise the timeout on bss may remove the newly chosen entry + */ +static struct bss_info *at76_match_bss(struct at76_priv *priv, + struct bss_info *last) +{ + struct bss_info *ptr = NULL; + struct list_head *curr; + + curr = last ? last->list.next : priv->bss_list.next; + while (curr != &priv->bss_list) { + ptr = list_entry(curr, struct bss_info, list); + if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr) + && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr) + && at76_match_bssid(priv, ptr)) + break; + curr = curr->next; + } + + if (curr == &priv->bss_list) + ptr = NULL; + /* otherwise ptr points to the struct bss_info we have chosen */ + + at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name, + __func__, ptr); + return ptr; +} + +/* Start joining a matching BSS, or create own IBSS */ +static void at76_work_join(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_join); + int ret; + unsigned long flags; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_JOINING); + if (priv->mac_state != MAC_JOINING) + goto exit; + + /* secure the access to priv->curr_bss ! */ + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + priv->curr_bss = at76_match_bss(priv, priv->curr_bss); + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); + + if (!priv->curr_bss) { + /* here we haven't found a matching (i)bss ... */ + if (priv->iw_mode == IW_MODE_ADHOC) { + at76_set_mac_state(priv, MAC_OWN_IBSS); + at76_start_ibss(priv); + goto exit; + } + /* haven't found a matching BSS in infra mode - try again */ + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + goto exit; + } + + ret = at76_join_bss(priv, priv->curr_bss); + if (ret < 0) { + printk(KERN_ERR "%s: join_bss failed with %d\n", + priv->netdev->name, ret); + goto exit; + } + + ret = at76_wait_completion(priv, CMD_JOIN); + if (ret != CMD_STATUS_COMPLETE) { + if (ret != CMD_STATUS_TIME_OUT) + printk(KERN_ERR "%s: join_bss completed with %d\n", + priv->netdev->name, ret); + else + printk(KERN_INFO "%s: join_bss ssid %s timed out\n", + priv->netdev->name, + mac2str(priv->curr_bss->bssid)); + + /* retry next BSS immediately */ + schedule_work(&priv->work_join); + goto exit; + } + + /* here we have joined the (I)BSS */ + if (priv->iw_mode == IW_MODE_ADHOC) { + struct bss_info *bptr = priv->curr_bss; + at76_set_mac_state(priv, MAC_CONNECTED); + /* get ESSID, BSSID and channel for priv->curr_bss */ + priv->essid_size = bptr->ssid_len; + memcpy(priv->essid, bptr->ssid, bptr->ssid_len); + memcpy(priv->bssid, bptr->bssid, ETH_ALEN); + priv->channel = bptr->channel; + at76_iwevent_bss_connect(priv->netdev, bptr->bssid); + netif_carrier_on(priv->netdev); + netif_start_queue(priv->netdev); + /* just to be sure */ + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + } else { + /* send auth req */ + priv->retries = AUTH_RETRIES; + at76_set_mac_state(priv, MAC_AUTH); + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Reap scan results */ +static void at76_dwork_get_scan(struct work_struct *work) +{ + int status; + int ret; + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_get_scan.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + status = at76_get_cmd_status(priv->udev, CMD_SCAN); + if (status < 0) { + printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n", + priv->netdev->name, __func__, status); + status = CMD_STATUS_IN_PROGRESS; + /* INFO: Hope it was a one off error - if not, scanning + further down the line and stop this cycle */ + } + at76_dbg(DBG_PROGRESS, + "%s %s: got cmd_status %d (state %s, need_any %d)", + priv->netdev->name, __func__, status, + mac_states[priv->mac_state], priv->scan_need_any); + + if (status != CMD_STATUS_COMPLETE) { + if ((status != CMD_STATUS_IN_PROGRESS) && + (status != CMD_STATUS_IDLE)) + printk(KERN_ERR "%s: %s: Bad scan status: %s\n", + priv->netdev->name, __func__, + at76_get_cmd_status_string(status)); + + /* the first cmd status after scan start is always a IDLE -> + start the timer to poll again until COMPLETED */ + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + goto exit; + } + + if (at76_debug & DBG_BSS_TABLE) + at76_dump_bss_table(priv); + + if (priv->scan_need_any) { + ret = at76_start_scan(priv, 0); + if (ret < 0) + printk(KERN_ERR + "%s: %s: start_scan (ANY) failed with %d\n", + priv->netdev->name, __func__, ret); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", __func__, + __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + priv->scan_need_any = 0; + } else { + priv->scan_state = SCAN_COMPLETED; + /* report the end of scan to user space */ + at76_iwevent_scan_complete(priv->netdev); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle loss of beacons from the AP */ +static void at76_dwork_beacon(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_beacon.work); + + mutex_lock(&priv->mtx); + if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA) + goto exit; + + /* We haven't received any beacons from out AP for BEACON_TIMEOUT */ + printk(KERN_INFO "%s: lost beacon bssid %s\n", + priv->netdev->name, mac2str(priv->curr_bss->bssid)); + + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle authentication response timeout */ +static void at76_dwork_auth(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_auth.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_AUTH); + if (priv->mac_state != MAC_AUTH) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: authentication response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_auth_req(priv, priv->curr_bss, 1, NULL); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Handle association response timeout */ +static void at76_dwork_assoc(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_assoc.work); + + mutex_lock(&priv->mtx); + WARN_ON(priv->mac_state != MAC_ASSOC); + if (priv->mac_state != MAC_ASSOC) + goto exit; + + at76_dbg(DBG_PROGRESS, "%s: association response timeout", + priv->netdev->name); + + if (priv->retries-- >= 0) { + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", + __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + } else { + /* try to get next matching BSS */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + } + +exit: + mutex_unlock(&priv->mtx); +} + +/* Read new bssid in ad-hoc mode */ +static void at76_work_new_bss(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_new_bss); + int ret; + struct mib_mac_mgmt mac_mgmt; + + mutex_lock(&priv->mtx); + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + printk(KERN_ERR "%s: at76_get_mib failed: %d\n", + priv->netdev->name, ret); + goto exit; + } + + at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change); + memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN); + at76_dbg(DBG_PROGRESS, "using BSSID %s", mac2str(priv->bssid)); + + at76_iwevent_bss_connect(priv->netdev, priv->bssid); + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change); + priv->mib_buf.data.byte = 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n", + priv->netdev->name, ret); + +exit: + mutex_unlock(&priv->mtx); +} + static int at76_startup_device(struct at76_priv *priv) { struct at76_card_config *ccfg = &priv->card_config; @@ -1470,14 +3905,14 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d " - "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size, - priv->essid, hex2str(priv->essid, IW_ESSID_MAX_SIZE), + "keylen %d", priv->netdev->name, priv->essid_size, priv->essid, + hex2str(priv->essid, IW_ESSID_MAX_SIZE), priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra", priv->channel, priv->wep_enabled ? "enabled" : "disabled", priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]); at76_dbg(DBG_PARAMS, "%s param: preamble %s rts %d retry %d frag %d " - "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy), + "txrate %s auth_mode %d", priv->netdev->name, preambles[priv->preamble_type], priv->rts_threshold, priv->short_retry_limit, priv->frag_threshold, priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate == @@ -1488,7 +3923,7 @@ static int at76_startup_device(struct at76_priv *priv) at76_dbg(DBG_PARAMS, "%s param: pm_mode %d pm_period %d auth_mode %s " "scan_times %d %d scan_mode %s", - wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period, + priv->netdev->name, priv->pm_mode, priv->pm_period, priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret", priv->scan_min_time, priv->scan_max_time, priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive"); @@ -1522,8 +3957,7 @@ static int at76_startup_device(struct at76_priv *priv) ccfg->ssid_len = priv->essid_size; ccfg->wep_default_key_id = priv->wep_key_id; - memcpy(ccfg->wep_default_key_value, priv->wep_keys, - sizeof(priv->wep_keys)); + memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN); ccfg->short_preamble = priv->preamble_type; ccfg->beacon_period = cpu_to_le16(priv->beacon_period); @@ -1532,7 +3966,7 @@ static int at76_startup_device(struct at76_priv *priv) sizeof(struct at76_card_config)); if (ret < 0) { printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); return ret; } @@ -1578,6 +4012,69 @@ static int at76_startup_device(struct at76_priv *priv) return 0; } +/* Restart the interface */ +static void at76_dwork_restart(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_restart.work); + + mutex_lock(&priv->mtx); + + netif_carrier_off(priv->netdev); /* stop netdev watchdog */ + netif_stop_queue(priv->netdev); /* stop tx data packets */ + + at76_startup_device(priv); + + if (priv->iw_mode != IW_MODE_MONITOR) { + priv->netdev->type = ARPHRD_ETHER; + at76_set_mac_state(priv, MAC_SCANNING); + schedule_work(&priv->work_start_scan); + } else { + priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP; + at76_start_monitor(priv); + } + + mutex_unlock(&priv->mtx); +} + +/* Initiate scanning */ +static void at76_work_start_scan(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_start_scan); + int ret; + + mutex_lock(&priv->mtx); + + WARN_ON(priv->mac_state != MAC_SCANNING); + if (priv->mac_state != MAC_SCANNING) + goto exit; + + /* only clear the bss list when a scan is actively initiated, + * otherwise simply rely on at76_bss_list_timeout */ + if (priv->scan_state == SCAN_IN_PROGRESS) { + at76_free_bss_list(priv); + priv->scan_need_any = 1; + } else + priv->scan_need_any = 0; + + ret = at76_start_scan(priv, 1); + + if (ret < 0) + printk(KERN_ERR "%s: %s: start_scan failed with %d\n", + priv->netdev->name, __func__, ret); + else { + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer for %d ticks", + __func__, __LINE__, SCAN_POLL_INTERVAL); + schedule_delayed_work(&priv->dwork_get_scan, + SCAN_POLL_INTERVAL); + } + +exit: + mutex_unlock(&priv->mtx); +} + /* Enable or disable promiscuous mode */ static void at76_work_set_promisc(struct work_struct *work) { @@ -1595,7 +4092,7 @@ static void at76_work_set_promisc(struct work_struct *work) ret = at76_set_mib(priv, &priv->mib_buf); if (ret < 0) printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); + priv->netdev->name, ret); mutex_unlock(&priv->mtx); } @@ -1611,759 +4108,1088 @@ static void at76_work_submit_rx(struct work_struct *work) mutex_unlock(&priv->mtx); } -static void at76_rx_tasklet(unsigned long param) +/* We got an association response */ +static void at76_rx_mgmt_assoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct urb *urb = (struct urb *)param; - struct at76_priv *priv = urb->context; - struct at76_rx_buffer *buf; - struct ieee80211_rx_status rx_status = { 0 }; - - if (priv->device_unplugged) { - at76_dbg(DBG_DEVSTART, "device unplugged"); - if (urb) - at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + struct ieee80211_assoc_response *resp = + (struct ieee80211_assoc_response *)buf->packet; + u16 assoc_id = le16_to_cpu(resp->aid); + u16 status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %s capa 0x%04x status " + "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name, + mac2str(resp->header.addr3), le16_to_cpu(resp->capability), + status, assoc_id, hex2str(resp->info_element->data, + resp->info_element->len)); + + if (priv->mac_state != MAC_ASSOC) { + printk(KERN_INFO "%s: AssocResp in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); return; } - if (!priv->rx_skb || !priv->rx_skb->data) - return; - - buf = (struct at76_rx_buffer *)priv->rx_skb->data; - - if (urb->status != 0) { - if (urb->status != -ENOENT && urb->status != -ECONNRESET) - at76_dbg(DBG_URB, - "%s %s: - nonzero Rx bulk status received: %d", - __func__, wiphy_name(priv->hw->wiphy), - urb->status); - return; + BUG_ON(!priv->curr_bss); + + cancel_delayed_work(&priv->dwork_assoc); + if (status == WLAN_STATUS_SUCCESS) { + struct bss_info *ptr = priv->curr_bss; + priv->assoc_id = assoc_id & 0x3fff; + /* update iwconfig params */ + memcpy(priv->bssid, ptr->bssid, ETH_ALEN); + memcpy(priv->essid, ptr->ssid, ptr->ssid_len); + priv->essid_size = ptr->ssid_len; + priv->channel = ptr->channel; + schedule_work(&priv->work_assoc_done); + } else { + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } +} - at76_dbg(DBG_RX_ATMEL_HDR, - "%s: rx frame: rate %d rssi %d noise %d link %d", - wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi, - buf->noise_level, buf->link_quality); - - skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength) + AT76_RX_HDRLEN); - at76_dbg_dump(DBG_RX_DATA, &priv->rx_skb->data[AT76_RX_HDRLEN], - priv->rx_skb->len, "RX: len=%d", - (int)(priv->rx_skb->len - AT76_RX_HDRLEN)); +/* Process disassociation request from the AP */ +static void at76_rx_mgmt_disassoc(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT, + "%s: rx DisAssoc bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + /* We are not connected, ignore */ + if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT + || !priv->curr_bss) + return; - rx_status.signal = buf->rssi; - /* FIXME: is rate_idx still present in structure? */ - rx_status.rate_idx = buf->rx_rate; - rx_status.flag |= RX_FLAG_DECRYPTED; - rx_status.flag |= RX_FLAG_IV_STRIPPED; + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - skb_pull(priv->rx_skb, AT76_RX_HDRLEN); - at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d", - priv->rx_skb->len, priv->rx_skb->data_len); - ieee80211_rx_irqsafe(priv->hw, priv->rx_skb, &rx_status); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; - /* Use a new skb for the next receive */ - priv->rx_skb = NULL; + if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED + && priv->mac_state != MAC_JOINING) { + printk(KERN_INFO "%s: DisAssoc in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - at76_submit_rx_urb(priv); + if (priv->mac_state == MAC_CONNECTED) { + netif_carrier_off(priv->netdev); + netif_stop_queue(priv->netdev); + at76_iwevent_bss_disconnect(priv->netdev); + } + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); } -/* Load firmware into kernel memory and parse it */ -static struct fwentry *at76_load_firmware(struct usb_device *udev, - enum board_type board_type) +static void at76_rx_mgmt_auth(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - int ret; - char *str; - struct at76_fw_header *fwh; - struct fwentry *fwe = &firmwares[board_type]; - - mutex_lock(&fw_mutex); - - if (fwe->loaded) { - at76_dbg(DBG_FW, "re-using previously loaded fw"); - goto exit; + struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + int seq_nr = le16_to_cpu(resp->transaction); + int alg = le16_to_cpu(resp->algorithm); + int status = le16_to_cpu(resp->status); + + at76_dbg(DBG_RX_MGMT, + "%s: rx AuthFrame bssid %s alg %d seq_nr %d status %d " + "destination %s", priv->netdev->name, mac2str(mgmt->addr3), + alg, seq_nr, status, mac2str(mgmt->addr1)); + + if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2) + at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...", + priv->netdev->name, hex2str(resp->info_element, 18)); + + if (priv->mac_state != MAC_AUTH) { + printk(KERN_INFO "%s: ignored AuthFrame in state %s\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; } - - at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); - ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); - if (ret < 0) { - dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", - fwe->fwname); - dev_printk(KERN_ERR, &udev->dev, - "you may need to download the firmware from " - "http://developer.berlios.de/projects/at76c503a/\n"); - goto exit; + if (priv->auth_mode != alg) { + printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n", + priv->netdev->name, alg); + return; } - at76_dbg(DBG_FW, "got it."); - fwh = (struct at76_fw_header *)(fwe->fw->data); + BUG_ON(!priv->curr_bss); - if (fwe->fw->size <= sizeof(*fwh)) { - dev_printk(KERN_ERR, &udev->dev, - "firmware is too short (0x%zx)\n", fwe->fw->size); - goto exit; + /* Not our BSSID or not for our STA, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid) + || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)) + return; + + cancel_delayed_work(&priv->dwork_auth); + if (status != WLAN_STATUS_SUCCESS) { + /* try to join next bss */ + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + return; } - /* CRC currently not checked */ - fwe->board_type = le32_to_cpu(fwh->board_type); - if (fwe->board_type != board_type) { - dev_printk(KERN_ERR, &udev->dev, - "board type mismatch, requested %u, got %u\n", - board_type, fwe->board_type); - goto exit; + if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) { + priv->retries = ASSOC_RETRIES; + at76_set_mac_state(priv, MAC_ASSOC); + at76_assoc_req(priv, priv->curr_bss); + at76_dbg(DBG_MGMT_TIMER, + "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__); + schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT); + return; } - fwe->fw_version.major = fwh->major; - fwe->fw_version.minor = fwh->minor; - fwe->fw_version.patch = fwh->patch; - fwe->fw_version.build = fwh->build; + WARN_ON(seq_nr != 2); + at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element); + at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__, + __LINE__); + schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT); +} - str = (char *)fwh + le32_to_cpu(fwh->str_offset); - fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); - fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); - fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); - fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); +static void at76_rx_mgmt_deauth(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct ieee80211_disassoc *resp = + (struct ieee80211_disassoc *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &resp->header; + + at76_dbg(DBG_RX_MGMT | DBG_PROGRESS, + "%s: rx DeAuth bssid %s reason 0x%04x destination %s", + priv->netdev->name, mac2str(mgmt->addr3), + le16_to_cpu(resp->reason), mac2str(mgmt->addr1)); + + if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC + && priv->mac_state != MAC_CONNECTED) { + printk(KERN_INFO "%s: DeAuth in state %s ignored\n", + priv->netdev->name, mac_states[priv->mac_state]); + return; + } - fwe->loaded = 1; + BUG_ON(!priv->curr_bss); - dev_printk(KERN_DEBUG, &udev->dev, - "using firmware %s (version %d.%d.%d-%d)\n", - fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); + /* Not our BSSID, ignore */ + if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)) + return; - at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, - le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), - le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); - at76_dbg(DBG_DEVSTART, "firmware id %s", str); + /* Not for our STA and not broadcast, ignore */ + if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1) + && !is_broadcast_ether_addr(mgmt->addr1)) + return; -exit: - mutex_unlock(&fw_mutex); + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); - if (fwe->loaded) - return fwe; - else - return NULL; + at76_set_mac_state(priv, MAC_JOINING); + schedule_work(&priv->work_join); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); } -static void at76_mac80211_tx_callback(struct urb *urb) +static void at76_rx_mgmt_beacon(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = urb->context; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + int varpar_len; + /* beacon content */ + struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet; + struct ieee80211_hdr_3addr *mgmt = &bdata->header; + + struct list_head *lptr; + struct bss_info *match; /* entry matching addr3 with its bssid */ + int new_entry = 0; + int len; + struct ieee80211_info_element *ie; + int have_ssid = 0; + int have_rates = 0; + int have_channel = 0; + int keep_going = 1; + unsigned long flags; + + spin_lock_irqsave(&priv->bss_list_spinlock, flags); + if (priv->mac_state == MAC_CONNECTED) { + /* in state MAC_CONNECTED we use the mgmt_timer to control + the beacon of the BSS */ + BUG_ON(!priv->curr_bss); + + if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) { + /* We got our AP's beacon, defer the timeout handler. + Kill pending work first, as schedule_delayed_work() + won't do it. */ + cancel_delayed_work(&priv->dwork_beacon); + schedule_delayed_work(&priv->dwork_beacon, + BEACON_TIMEOUT); + priv->curr_bss->rssi = buf->rssi; + priv->beacons_received++; + goto exit; + } + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* look if we have this BSS already in the list */ + match = NULL; - switch (urb->status) { - case 0: - /* success */ - /* FIXME: - * is the frame really ACKed when tx_callback is called ? */ - info->flags |= IEEE80211_TX_STAT_ACK; - break; - case -ENOENT: - case -ECONNRESET: - /* fail, urb has been unlinked */ - /* FIXME: add error message */ - break; - default: - at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", - __func__, urb->status); - break; + if (!list_empty(&priv->bss_list)) { + list_for_each(lptr, &priv->bss_list) { + struct bss_info *bss_ptr = + list_entry(lptr, struct bss_info, list); + if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) { + match = bss_ptr; + break; + } + } } - memset(&info->status, 0, sizeof(info->status)); + if (!match) { + /* BSS not in the list - append it */ + match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC); + if (!match) { + at76_dbg(DBG_BSS_TABLE, + "%s: cannot kmalloc new bss info (%zd byte)", + priv->netdev->name, sizeof(struct bss_info)); + goto exit; + } + new_entry = 1; + list_add_tail(&match->list, &priv->bss_list); + } - ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + match->capa = le16_to_cpu(bdata->capability); + match->beacon_interval = le16_to_cpu(bdata->beacon_interval); + match->rssi = buf->rssi; + match->link_qual = buf->link_quality; + match->noise_level = buf->noise_level; + memcpy(match->bssid, mgmt->addr3, ETH_ALEN); + at76_dbg(DBG_RX_BEACON, "%s: bssid %s", priv->netdev->name, + mac2str(match->bssid)); + + ie = bdata->info_element; + + /* length of var length beacon parameters */ + varpar_len = min_t(int, le16_to_cpu(buf->wlength) - + sizeof(struct ieee80211_beacon), + BEACON_MAX_DATA_LENGTH); + + /* This routine steps through the bdata->data array to get + * some useful information about the access point. + * Currently, this implementation supports receipt of: SSID, + * supported transfer rates and channel, in any order, with some + * tolerance for intermittent unknown codes (although this + * functionality may not be necessary as the useful information will + * usually arrive in consecutively, but there have been some + * reports of some of the useful information fields arriving in a + * different order). + * It does not support any more IE types although MFIE_TYPE_TIM may + * be supported (on my AP at least). + * The bdata->data array is about 1500 bytes long but only ~36 of those + * bytes are useful, hence the have_ssid etc optimizations. */ + + while (keep_going && + ((&ie->data[ie->len] - (u8 *)bdata->info_element) <= + varpar_len)) { + + switch (ie->id) { + + case MFIE_TYPE_SSID: + if (have_ssid) + break; - priv->tx_skb = NULL; + len = min_t(int, IW_ESSID_MAX_SIZE, ie->len); - ieee80211_wake_queues(priv->hw); -} + /* we copy only if this is a new entry, + or the incoming SSID is not a hidden SSID. This + will protect us from overwriting a real SSID read + in a ProbeResponse with a hidden one from a + following beacon. */ + if (!new_entry && at76_is_hidden_ssid(ie->data, len)) { + have_ssid = 1; + break; + } -static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct at76_priv *priv = hw->priv; - struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - int padding, submit_len, ret; + match->ssid_len = len; + memcpy(match->ssid, ie->data, len); + at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s", + priv->netdev->name, len, match->ssid); + have_ssid = 1; + break; - at76_dbg(DBG_MAC80211, "%s()", __func__); + case MFIE_TYPE_RATES: + if (have_rates) + break; - if (priv->tx_urb->status == -EINPROGRESS) { - printk(KERN_ERR "%s: %s called while tx urb is pending\n", - wiphy_name(priv->hw->wiphy), __func__); - return NETDEV_TX_BUSY; - } + match->rates_len = + min_t(int, sizeof(match->rates), ie->len); + memcpy(match->rates, ie->data, match->rates_len); + have_rates = 1; + at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s", + priv->netdev->name, + hex2str(ie->data, ie->len)); + break; - ieee80211_stop_queues(hw); + case MFIE_TYPE_DS_SET: + if (have_channel) + break; - at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + match->channel = ie->data[0]; + have_channel = 1; + at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d", + priv->netdev->name, match->channel); + break; - WARN_ON(priv->tx_skb != NULL); + case MFIE_TYPE_CF_SET: + case MFIE_TYPE_TIM: + case MFIE_TYPE_IBSS_SET: + default: + at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s", + priv->netdev->name, ie->id, ie->len, + hex2str(ie->data, ie->len)); + break; + } - priv->tx_skb = skb; - padding = at76_calc_padding(skb->len); - submit_len = AT76_TX_HDRLEN + skb->len + padding; + /* advance to the next informational element */ + next_ie(&ie); - /* setup 'Atmel' header */ - memset(tx_buffer, 0, sizeof(*tx_buffer)); - tx_buffer->padding = padding; - tx_buffer->wlength = cpu_to_le16(skb->len); - tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value; - if (FIRMWARE_IS_WPA(priv->fw_version) && info->control.hw_key) { - tx_buffer->key_id = (info->control.hw_key->keyidx); - tx_buffer->cipher_type = - priv->keys[info->control.hw_key->keyidx].cipher; - tx_buffer->cipher_length = - priv->keys[info->control.hw_key->keyidx].keylen; - tx_buffer->reserved = 0; - } else { - tx_buffer->key_id = 0; - tx_buffer->cipher_type = 0; - tx_buffer->cipher_length = 0; - tx_buffer->reserved = 0; - }; - /* memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); */ - memcpy(tx_buffer->packet, skb->data, skb->len); + /* Optimization: after all, the bdata->data array is + * varpar_len bytes long, whereas we get all of the useful + * information after only ~36 bytes, this saves us a lot of + * time (and trouble as the remaining portion of the array + * could be full of junk) + * Comment this out if you want to see what other information + * comes from the AP - although little of it may be useful */ + } - at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr", - wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength), - tx_buffer->padding, tx_buffer->tx_rate); + at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data", + priv->netdev->name); - /* send stuff */ - at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len, - "%s(): tx_buffer %d bytes:", __func__, submit_len); - usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, - submit_len, at76_mac80211_tx_callback, priv); - ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); - if (ret) { - printk(KERN_ERR "%s: error in tx submit urb: %d\n", - wiphy_name(priv->hw->wiphy), ret); - if (ret == -EINVAL) - printk(KERN_ERR - "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n", - wiphy_name(priv->hw->wiphy), priv->tx_urb, - priv->tx_urb->hcpriv, priv->tx_urb->complete); - } + match->last_rx = jiffies; /* record last rx of beacon */ - return 0; +exit: + spin_unlock_irqrestore(&priv->bss_list_spinlock, flags); } -static int at76_mac80211_start(struct ieee80211_hw *hw) +/* Calculate the link level from a given rx_buffer */ +static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - int ret; - - at76_dbg(DBG_MAC80211, "%s()", __func__); + /* just a guess for now, might be different for other chips */ + int max_rssi = 42; - mutex_lock(&priv->mtx); - - ret = at76_submit_rx_urb(priv); - if (ret < 0) { - printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - goto error; - } + qual->level = (buf->rssi * 100 / max_rssi); + if (qual->level > 100) + qual->level = 100; + qual->updated |= IW_QUAL_LEVEL_UPDATED; +} - at76_startup_device(priv); +/* Calculate the link quality from a given rx_buffer */ +static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) +{ + if (at76_is_intersil(priv->board_type)) + qual->qual = buf->link_quality; + else { + unsigned long elapsed; - at76_start_monitor(priv); + /* Update qual at most once a second */ + elapsed = jiffies - priv->beacons_last_qual; + if (elapsed < 1 * HZ) + return; -error: - mutex_unlock(&priv->mtx); + qual->qual = qual->level * priv->beacons_received * + msecs_to_jiffies(priv->beacon_period) / elapsed; - return 0; + priv->beacons_last_qual = jiffies; + priv->beacons_received = 0; + } + qual->qual = (qual->qual > 100) ? 100 : qual->qual; + qual->updated |= IW_QUAL_QUAL_UPDATED; } -static void at76_mac80211_stop(struct ieee80211_hw *hw) +/* Calculate the noise quality from a given rx_buffer */ +static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf, + struct iw_quality *qual) { - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s()", __func__); - - mutex_lock(&priv->mtx); + qual->noise = 0; + qual->updated |= IW_QUAL_NOISE_INVALID; +} - if (!priv->device_unplugged) { - /* We are called by "ifconfig ethX down", not because the - * device is not available anymore. */ - if (at76_set_radio(priv, 0) == 1) - at76_wait_completion(priv, CMD_RADIO_ON); +static void at76_update_wstats(struct at76_priv *priv, + struct at76_rx_buffer *buf) +{ + struct iw_quality *qual = &priv->wstats.qual; - /* We unlink rx_urb because at76_open() re-submits it. - * If unplugged, at76_delete_device() takes care of it. */ - usb_kill_urb(priv->rx_urb); + if (buf->rssi && priv->mac_state == MAC_CONNECTED) { + qual->updated = 0; + at76_calc_level(priv, buf, qual); + at76_calc_qual(priv, buf, qual); + at76_calc_noise(priv, buf, qual); + } else { + qual->qual = 0; + qual->level = 0; + qual->noise = 0; + qual->updated = IW_QUAL_ALL_INVALID; } - - mutex_unlock(&priv->mtx); } -static int at76_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int ret = 0; + struct ieee80211_hdr_3addr *mgmt = + (struct ieee80211_hdr_3addr *)buf->packet; + u16 framectl = le16_to_cpu(mgmt->frame_ctl); + + /* update wstats */ + if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) { + /* jal: this is a dirty hack needed by Tim in ad-hoc mode */ + /* Data packets always seem to have a 0 link level, so we + only read link quality info from management packets. + Atmel driver actually averages the present, and previous + values, we just present the raw value at the moment - TJS */ + if (priv->iw_mode == IW_MODE_ADHOC + || (priv->curr_bss + && !compare_ether_addr(mgmt->addr3, + priv->curr_bss->bssid))) + at76_update_wstats(priv, buf); + } - at76_dbg(DBG_MAC80211, "%s()", __func__); + at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s", + priv->netdev->name, framectl, + hex2str(mgmt, le16_to_cpu(buf->wlength))); - mutex_lock(&priv->mtx); + switch (framectl & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_BEACON: + case IEEE80211_STYPE_PROBE_RESP: + at76_rx_mgmt_beacon(priv, buf); + break; + + case IEEE80211_STYPE_ASSOC_RESP: + at76_rx_mgmt_assoc(priv, buf); + break; - switch (conf->type) { - case NL80211_IFTYPE_STATION: - priv->iw_mode = IW_MODE_INFRA; + case IEEE80211_STYPE_DISASSOC: + at76_rx_mgmt_disassoc(priv, buf); break; + + case IEEE80211_STYPE_AUTH: + at76_rx_mgmt_auth(priv, buf); + break; + + case IEEE80211_STYPE_DEAUTH: + at76_rx_mgmt_deauth(priv, buf); + break; + default: - ret = -EOPNOTSUPP; - goto exit; + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, framectl); } -exit: - mutex_unlock(&priv->mtx); - - return ret; + return; } -static void at76_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +/* Convert the 802.11 header into an ethernet-style header, make skb + * ready for consumption by netif_rx() */ +static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode) { - at76_dbg(DBG_MAC80211, "%s()", __func__); -} + struct ieee80211_hdr_3addr *i802_11_hdr; + struct ethhdr *eth_hdr_p; + u8 *src_addr; + u8 *dest_addr; -static int at76_join(struct at76_priv *priv) -{ - struct at76_req_join join; - int ret; + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - memset(&join, 0, sizeof(struct at76_req_join)); - memcpy(join.essid, priv->essid, priv->essid_size); - join.essid_size = priv->essid_size; - memcpy(join.bssid, priv->bssid, ETH_ALEN); - join.bss_type = INFRASTRUCTURE_MODE; - join.channel = priv->channel; - join.timeout = cpu_to_le16(2000); + /* That would be the ethernet header if the hardware converted + * the frame for us. Make sure the source and the destination + * match the 802.11 header. Which hardware does it? */ + eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN); - at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__); - ret = at76_set_card_command(priv->udev, CMD_JOIN, &join, - sizeof(struct at76_req_join)); + dest_addr = i802_11_hdr->addr1; + if (iw_mode == IW_MODE_ADHOC) + src_addr = i802_11_hdr->addr2; + else + src_addr = i802_11_hdr->addr3; - if (ret < 0) { - printk(KERN_ERR "%s: at76_set_card_command failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; - } + if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) && + !compare_ether_addr(eth_hdr_p->h_dest, dest_addr)) + /* Yes, we already have an ethernet header */ + skb_reset_mac_header(skb); + else { + u16 len; + + /* Need to build an ethernet header */ + if (!memcmp(skb->data, snapsig, sizeof(snapsig))) { + /* SNAP frame - decapsulate, keep proto */ + skb_push(skb, offsetof(struct ethhdr, h_proto) - + sizeof(rfc1042sig)); + len = 0; + } else { + /* 802.3 frame, proto is length */ + len = skb->len; + skb_push(skb, ETH_HLEN); + } - ret = at76_wait_completion(priv, CMD_JOIN); - at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret); - if (ret != CMD_STATUS_COMPLETE) { - printk(KERN_ERR "%s: at76_wait_completion failed: %d\n", - wiphy_name(priv->hw->wiphy), ret); - return 0; + skb_reset_mac_header(skb); + eth_hdr_p = eth_hdr(skb); + /* This needs to be done in this order (eth_hdr_p->h_dest may + * overlap src_addr) */ + memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN); + memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN); + if (len) + eth_hdr_p->h_proto = htons(len); } - at76_set_tkip_bssid(priv, priv->bssid); - at76_set_pm_mode(priv); - - return 0; + skb->protocol = eth_type_trans(skb, skb->dev); } -static void at76_dwork_hw_scan(struct work_struct *work) +/* Check for fragmented data in priv->rx_skb. If the packet was no fragment + or it was the last of a fragment set a skb containing the whole packet + is returned for further processing. Otherwise we get NULL and are + done and the packet is either stored inside the fragment buffer + or thrown away. Every returned skb starts with the ieee802_11 header + and contains _no_ FCS at the end */ +static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv) { - struct at76_priv *priv = container_of(work, struct at76_priv, - dwork_hw_scan.work); - int ret; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + /* seq_ctrl, fragment_number, sequence number of new packet */ + u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl); + u16 fragnr = sctl & 0xf; + u16 seqnr = sctl >> 4; + u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - ret = at76_get_cmd_status(priv->udev, CMD_SCAN); - at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret); + /* Length including the IEEE802.11 header, but without the trailing + * FCS and without the Atmel Rx header */ + int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN; - /* FIXME: add maximum time for scan to complete */ + /* where does the data payload start in skb->data ? */ + u8 *data = i802_11_hdr->payload; - if (ret != CMD_STATUS_COMPLETE) { - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); - goto exit; + /* length of payload, excl. the trailing FCS */ + int data_len = length - IEEE80211_3ADDR_LEN; + + int i; + struct rx_data_buf *bptr, *optr; + unsigned long oldest = ~0UL; + + at76_dbg(DBG_RX_FRAGS, + "%s: rx data frame_ctl %04x addr2 %s seq/frag %d/%d " + "length %d data %d: %s ...", priv->netdev->name, frame_ctl, + mac2str(i802_11_hdr->addr2), seqnr, fragnr, length, data_len, + hex2str(data, 32)); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p " + "tail %p end %p len %d", priv->netdev->name, skb->head, + skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), + skb->len); + + if (data_len < 0) { + /* make sure data starts in the buffer */ + printk(KERN_INFO "%s: data frame too short\n", + priv->netdev->name); + return NULL; } - ieee80211_scan_completed(priv->hw); + WARN_ON(length <= AT76_RX_HDRLEN); + if (length <= AT76_RX_HDRLEN) + return NULL; - if (is_valid_ether_addr(priv->bssid)) { - ieee80211_wake_queues(priv->hw); - at76_join(priv); + /* remove the at76_rx_buffer header - we don't need it anymore */ + /* we need the IEEE802.11 header (for the addresses) if this packet + is the first of a chain */ + skb_pull(skb, AT76_RX_HDRLEN); + + /* remove FCS at end */ + skb_trim(skb, length); + + at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p " + "end %p len %d data %p data_len %d", priv->netdev->name, + skb->head, skb->data, skb_tail_pointer(skb), + skb_end_pointer(skb), skb->len, data, data_len); + + if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) { + /* unfragmented packet received */ + /* Use a new skb for the next receive */ + priv->rx_skb = NULL; + at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name); + return skb; } - ieee80211_wake_queues(priv->hw); + /* look if we've got a chain for the sender address. + afterwards optr points to first free or the oldest entry, + or, if i < NR_RX_DATA_BUF, bptr points to the entry for the + sender address */ + /* determining the oldest entry doesn't cope with jiffies wrapping + but I don't care to delete a young entry at these rare moments ... */ + + bptr = priv->rx_data; + optr = NULL; + for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) { + if (!bptr->skb) { + optr = bptr; + oldest = 0UL; + continue; + } -exit: - return; -} + if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender)) + break; -static int at76_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len) -{ - struct at76_priv *priv = hw->priv; - struct at76_req_scan scan; - int ret; + if (!optr) { + optr = bptr; + oldest = bptr->last_rx; + } else if (bptr->last_rx < oldest) + optr = bptr; + } - at76_dbg(DBG_MAC80211, "%s():", __func__); - at76_dbg_dump(DBG_MAC80211, ssid, len, "ssid %zd bytes:", len); + if (i < NR_RX_DATA_BUF) { + + at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) " + "matched sender addr", + priv->netdev->name, i, bptr->seqnr, bptr->fragnr); + + /* bptr points to an entry for the sender address */ + if (bptr->seqnr == seqnr) { + int left; + /* the fragment has the current sequence number */ + if (((bptr->fragnr + 1) & 0xf) != fragnr) { + /* wrong fragment number -> ignore it */ + /* is & 0xf necessary above ??? */ + at76_dbg(DBG_RX_FRAGS, + "%s: frag nr mismatch: %d + 1 != %d", + priv->netdev->name, bptr->fragnr, + fragnr); + return NULL; + } + bptr->last_rx = jiffies; + /* the next following fragment number -> + add the data at the end */ + + /* for test only ??? */ + left = skb_tailroom(bptr->skb); + if (left < data_len) + printk(KERN_INFO + "%s: only %d byte free (need %d)\n", + priv->netdev->name, left, data_len); + else + memcpy(skb_put(bptr->skb, data_len), data, + data_len); + + bptr->fragnr = fragnr; + if (frame_ctl & IEEE80211_FCTL_MOREFRAGS) + return NULL; + + /* this was the last fragment - send it */ + skb = bptr->skb; + bptr->skb = NULL; /* free the entry */ + at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d", + priv->netdev->name, seqnr); + return skb; + } - mutex_lock(&priv->mtx); + /* got another sequence number */ + if (fragnr == 0) { + /* it's the start of a new chain - replace the + old one by this */ + /* bptr->sender has the correct value already */ + at76_dbg(DBG_RX_FRAGS, + "%s: start of new seq %d, removing old seq %d", + priv->netdev->name, seqnr, bptr->seqnr); + bptr->seqnr = seqnr; + bptr->fragnr = 0; + bptr->last_rx = jiffies; + /* swap bptr->skb and priv->rx_skb */ + skb = bptr->skb; + bptr->skb = priv->rx_skb; + priv->rx_skb = skb; + } else { + /* it from the middle of a new chain -> + delete the old entry and skip the new one */ + at76_dbg(DBG_RX_FRAGS, + "%s: middle of new seq %d (%d) " + "removing old seq %d", + priv->netdev->name, seqnr, fragnr, + bptr->seqnr); + dev_kfree_skb(bptr->skb); + bptr->skb = NULL; + } + return NULL; + } - ieee80211_stop_queues(hw); + /* if we didn't find a chain for the sender address, optr + points either to the first free or the oldest entry */ - memset(&scan, 0, sizeof(struct at76_req_scan)); - memset(scan.bssid, 0xFF, ETH_ALEN); - scan.scan_type = SCAN_TYPE_ACTIVE; - if (priv->essid_size > 0) { - memcpy(scan.essid, ssid, len); - scan.essid_size = len; + if (fragnr != 0) { + /* this is not the begin of a fragment chain ... */ + at76_dbg(DBG_RX_FRAGS, + "%s: no chain for non-first fragment (%d)", + priv->netdev->name, fragnr); + return NULL; } - scan.min_channel_time = cpu_to_le16(priv->scan_min_time); - scan.max_channel_time = cpu_to_le16(priv->scan_max_time); - scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); - scan.international_scan = 0; - at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__); - ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); + BUG_ON(!optr); + if (optr->skb) { + /* swap the skb's */ + skb = optr->skb; + optr->skb = priv->rx_skb; + priv->rx_skb = skb; - if (ret < 0) { - err("CMD_SCAN failed: %d", ret); - goto exit; - } + at76_dbg(DBG_RX_FRAGS, + "%s: free old contents: sender %s seq/frag %d/%d", + priv->netdev->name, mac2str(optr->sender), + optr->seqnr, optr->fragnr); - queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, - SCAN_POLL_INTERVAL); + } else { + /* take the skb from priv->rx_skb */ + optr->skb = priv->rx_skb; + /* let at76_submit_rx_urb() allocate a new skb */ + priv->rx_skb = NULL; -exit: - mutex_unlock(&priv->mtx); + at76_dbg(DBG_RX_FRAGS, "%s: use a free entry", + priv->netdev->name); + } + memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN); + optr->seqnr = seqnr; + optr->fragnr = 0; + optr->last_rx = jiffies; - return 0; + return NULL; } -static int at76_config(struct ieee80211_hw *hw, u32 changed) +/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */ +static void at76_rx_data(struct at76_priv *priv) { - struct at76_priv *priv = hw->priv; - struct ieee80211_conf *conf = &hw->conf; + struct net_device *netdev = priv->netdev; + struct net_device_stats *stats = &priv->stats; + struct sk_buff *skb = priv->rx_skb; + struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data; + struct ieee80211_hdr_3addr *i802_11_hdr; + int length = le16_to_cpu(buf->wlength); - at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d", - __func__, conf->channel->hw_value, conf->radio_enabled); - at76_dbg_dump(DBG_MAC80211, priv->essid, priv->essid_size, "ssid:"); - at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); + at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name, + hex2str(skb->data, AT76_RX_HDRLEN)); - mutex_lock(&priv->mtx); + at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s", + hex2str(skb->data + AT76_RX_HDRLEN, length)); - priv->channel = conf->channel->hw_value; + skb = at76_check_for_rx_frags(priv); + if (!skb) + return; - if (is_valid_ether_addr(priv->bssid)) { - at76_join(priv); - ieee80211_wake_queues(priv->hw); - } else { - ieee80211_stop_queues(priv->hw); - at76_start_monitor(priv); - }; + /* Atmel header and the FCS are already removed */ + i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data; - mutex_unlock(&priv->mtx); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; /* TODO: should check CRC */ - return 0; -} + if (is_broadcast_ether_addr(i802_11_hdr->addr1)) { + if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast)) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr)) + skb->pkt_type = PACKET_OTHERHOST; -static int at76_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) -{ - struct at76_priv *priv = hw->priv; + at76_ieee80211_to_eth(skb, priv->iw_mode); - at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; - mutex_lock(&priv->mtx); + return; +} - memcpy(priv->bssid, conf->bssid, ETH_ALEN); -// memcpy(priv->essid, conf->ssid, conf->ssid_len); -// priv->essid_size = conf->ssid_len; +static void at76_rx_monitor_mode(struct at76_priv *priv) +{ + struct at76_rx_radiotap *rt; + u8 *payload; + int skblen; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf = + (struct at76_rx_buffer *)priv->rx_skb->data; + /* length including the IEEE802.11 header and the trailing FCS, + but not at76_rx_buffer */ + int length = le16_to_cpu(buf->wlength); + struct sk_buff *skb = priv->rx_skb; + struct net_device_stats *stats = &priv->stats; - if (is_valid_ether_addr(priv->bssid)) { - /* mac80211 is joining a bss */ - ieee80211_wake_queues(priv->hw); - at76_join(priv); - } else - ieee80211_stop_queues(priv->hw); + if (length < IEEE80211_FCS_LEN) { + /* buffer contains no data */ + at76_dbg(DBG_MONITOR_MODE, + "%s: MONITOR MODE: rx skb without data", + priv->netdev->name); + return; + } - mutex_unlock(&priv->mtx); + skblen = sizeof(struct at76_rx_radiotap) + length; - return 0; + skb = dev_alloc_skb(skblen); + if (!skb) { + printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap " + "header returned NULL\n", priv->netdev->name); + return; + } + + skb_put(skb, skblen); + + rt = (struct at76_rx_radiotap *)skb->data; + payload = skb->data + sizeof(struct at76_rx_radiotap); + + rt->rt_hdr.it_version = 0; + rt->rt_hdr.it_pad = 0; + rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap)); + rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT); + + rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time)); + rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80); + rt->rt_signal = buf->rssi; + rt->rt_noise = buf->noise_level; + rt->rt_flags = IEEE80211_RADIOTAP_F_FCS; + if (buf->fragmentation) + rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG; + + memcpy(payload, buf->packet, length); + skb->dev = netdev; + skb->ip_summed = CHECKSUM_NONE; + skb_reset_mac_header(skb); + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + + netdev->last_rx = jiffies; + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; } -/* must be atomic */ -static void at76_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, int mc_count, - struct dev_addr_list *mc_list) +/* Check if we spy on the sender address in buf and update stats */ +static void at76_iwspy_update(struct at76_priv *priv, + struct at76_rx_buffer *buf) { - struct at76_priv *priv = hw->priv; - int flags; - - at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x " - "total_flags=0x%08x mc_count=%d", - __func__, changed_flags, *total_flags, mc_count); + struct ieee80211_hdr_3addr *hdr = + (struct ieee80211_hdr_3addr *)buf->packet; + struct iw_quality qual; - flags = changed_flags & AT76_SUPPORTED_FILTERS; - *total_flags = AT76_SUPPORTED_FILTERS; + /* We can only set the level here */ + qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; + qual.level = 0; + qual.noise = 0; + at76_calc_level(priv, buf, &qual); - /* FIXME: access to priv->promisc should be protected with - * priv->mtx, but it's impossible because this function needs to be - * atomic */ + spin_lock_bh(&priv->spy_spinlock); - if (flags && !priv->promisc) { - /* mac80211 wants us to enable promiscuous mode */ - priv->promisc = 1; - } else if (!flags && priv->promisc) { - /* we need to disable promiscuous mode */ - priv->promisc = 0; - } else - return; + if (priv->spy_data.spy_number > 0) + wireless_spy_update(priv->netdev, hdr->addr2, &qual); - queue_work(hw->workqueue, &priv->work_set_promisc); + spin_unlock_bh(&priv->spy_spinlock); } -static int at76_set_key_oldfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) +static void at76_rx_tasklet(unsigned long param) { - struct at76_priv *priv = hw->priv; - - int i; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + struct urb *urb = (struct urb *)param; + struct at76_priv *priv = urb->context; + struct net_device *netdev = priv->netdev; + struct at76_rx_buffer *buf; + struct ieee80211_hdr_3addr *i802_11_hdr; + u16 frame_ctl; - if (key->alg != ALG_WEP) - return -EOPNOTSUPP; + if (priv->device_unplugged) { + at76_dbg(DBG_DEVSTART, "device unplugged"); + if (urb) + at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + return; + } - key->hw_key_idx = key->keyidx; + if (!priv->rx_skb || !netdev || !priv->rx_skb->data) + return; - mutex_lock(&priv->mtx); + buf = (struct at76_rx_buffer *)priv->rx_skb->data; - switch (cmd) { - case SET_KEY: - memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen); - priv->wep_keys_len[key->keyidx] = key->keylen; + i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet; - /* FIXME: find out how to do this properly */ - priv->wep_key_id = key->keyidx; + frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl); - break; - case DISABLE_KEY: - default: - priv->wep_keys_len[key->keyidx] = 0; - break; + if (urb->status != 0) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) + at76_dbg(DBG_URB, + "%s %s: - nonzero Rx bulk status received: %d", + __func__, netdev->name, urb->status); + return; } - priv->wep_enabled = 0; + at76_dbg(DBG_RX_ATMEL_HDR, + "%s: rx frame: rate %d rssi %d noise %d link %d %s", + priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level, + buf->link_quality, hex2str(i802_11_hdr, 48)); + if (priv->iw_mode == IW_MODE_MONITOR) { + at76_rx_monitor_mode(priv); + goto exit; + } - for (i = 0; i < WEP_KEYS; i++) { - if (priv->wep_keys_len[i] != 0) - priv->wep_enabled = 1; + /* there is a new bssid around, accept it: */ + if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) { + at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name); + schedule_work(&priv->work_new_bss); } - at76_startup_device(priv); + switch (frame_ctl & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + at76_rx_data(priv); + break; - mutex_unlock(&priv->mtx); + case IEEE80211_FTYPE_MGMT: + /* jal: TODO: find out if we can update iwspy also on + other frames than management (might depend on the + radio chip / firmware version !) */ - return 0; -} + at76_iwspy_update(priv, buf); -static int at76_set_key_newfw(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - int ret = -EOPNOTSUPP; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + at76_rx_mgmt(priv, buf); + break; - mutex_lock(&priv->mtx); + case IEEE80211_FTYPE_CTL: + at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x", + priv->netdev->name, frame_ctl); + break; - priv->mib_buf.type = MIB_MAC_ENCRYPTION; + default: + printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n", + priv->netdev->name, frame_ctl); + } +exit: + at76_submit_rx_urb(priv); +} - if (cmd == DISABLE_KEY) { - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - if (at76_set_mib(priv, &priv->mib_buf) != CMD_STATUS_COMPLETE) - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - else { +/* Load firmware into kernel memory and parse it */ +static struct fwentry *at76_load_firmware(struct usb_device *udev, + enum board_type board_type) +{ + int ret; + char *str; + struct at76_fw_header *fwh; + struct fwentry *fwe = &firmwares[board_type]; - priv->keys[key->keyidx].cipher = CIPHER_NONE; - priv->keys[key->keyidx].keylen = 0; - }; - if (priv->default_group_key == key->keyidx) - priv->default_group_key = 0xff; + mutex_lock(&fw_mutex); - if (priv->default_pairwise_key == key->keyidx) - priv->default_pairwise_key = 0xff; - /* If default pairwise key is removed, fall back to - * group key? */ - ret = 0; + if (fwe->loaded) { + at76_dbg(DBG_FW, "re-using previously loaded fw"); goto exit; - }; - - if (cmd == SET_KEY) { - /* store key into MIB */ - priv->mib_buf.size = CIPHER_KEY_LEN; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - cipher_default_keyvalue[key->keyidx]); - memset(priv->mib_buf.data.data, 0, CIPHER_KEY_LEN); - memcpy(priv->mib_buf.data.data, key->key, key->keylen); - - switch (key->alg) { - case ALG_WEP: - if (key->keylen == 5) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP64; - priv->keys[key->keyidx].keylen = 8; - } else if (key->keylen == 13) { - priv->keys[key->keyidx].cipher = - CIPHER_WEP128; - /* Firmware needs this */ - priv->keys[key->keyidx].keylen = 8; - } else { - ret = -EOPNOTSUPP; - goto exit; - }; - break; - case ALG_TKIP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_TKIP; - priv->keys[key->keyidx].keylen = 12; - break; + } - case ALG_CCMP: - if (!at76_is_505a(priv->board_type)) { - ret = -EOPNOTSUPP; - goto exit; - }; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - priv->keys[key->keyidx].cipher = CIPHER_CCMP; - priv->keys[key->keyidx].keylen = 16; - break; + at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); + ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); + if (ret < 0) { + dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n", + fwe->fwname); + dev_printk(KERN_ERR, &udev->dev, + "you may need to download the firmware from " + "http://developer.berlios.de/projects/at76c503a/"); + goto exit; + } - default: - ret = -EOPNOTSUPP; - goto exit; - }; - - priv->mib_buf.data.data[38] = priv->keys[key->keyidx].cipher; - priv->mib_buf.data.data[39] = 1; /* Taken from atmelwlandriver, - not documented */ - - if (is_valid_ether_addr(address)) - /* Pairwise key */ - priv->mib_buf.data.data[39] |= (KEY_PAIRWISE | KEY_TX); - else if (is_broadcast_ether_addr(address)) - /* Group key */ - priv->mib_buf.data.data[39] |= (KEY_TX); - else /* Key used only for transmission ??? */ - priv->mib_buf.data.data[39] |= (KEY_TX); - - if (at76_set_mib(priv, &priv->mib_buf) != - CMD_STATUS_COMPLETE) { - ret = -EOPNOTSUPP; /* -EIO would be probably better */ - goto exit; - }; + at76_dbg(DBG_FW, "got it."); + fwh = (struct at76_fw_header *)(fwe->fw->data); - if ((key->alg == ALG_TKIP) || (key->alg == ALG_CCMP)) - at76_reset_rsc(priv); + if (fwe->fw->size <= sizeof(*fwh)) { + dev_printk(KERN_ERR, &udev->dev, + "firmware is too short (0x%zx)\n", fwe->fw->size); + goto exit; + } - key->hw_key_idx = key->keyidx; + /* CRC currently not checked */ + fwe->board_type = le32_to_cpu(fwh->board_type); + if (fwe->board_type != board_type) { + dev_printk(KERN_ERR, &udev->dev, + "board type mismatch, requested %u, got %u\n", + board_type, fwe->board_type); + goto exit; + } - /* Set up default keys */ - if (is_broadcast_ether_addr(address)) - priv->default_group_key = key->keyidx; - if (is_valid_ether_addr(address)) - priv->default_pairwise_key = key->keyidx; + fwe->fw_version.major = fwh->major; + fwe->fw_version.minor = fwh->minor; + fwe->fw_version.patch = fwh->patch; + fwe->fw_version.build = fwh->build; - /* Set up encryption MIBs */ + str = (char *)fwh + le32_to_cpu(fwh->str_offset); + fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); + fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); + fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); + fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); - /* first block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - privacy_invoked); - priv->mib_buf.data.data[0] = 1; /* privacy_invoked */ - priv->mib_buf.data.data[1] = priv->default_pairwise_key; - priv->mib_buf.data.data[2] = priv->default_group_key; + fwe->loaded = 1; - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; + dev_printk(KERN_DEBUG, &udev->dev, + "using firmware %s (version %d.%d.%d-%d)\n", + fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); - /* second block of settings */ - priv->mib_buf.size = 3; - priv->mib_buf.index = offsetof(struct mib_mac_encryption, - exclude_unencrypted); - priv->mib_buf.data.data[0] = 1; /* exclude_unencrypted */ - priv->mib_buf.data.data[1] = 0; /* wep_encryption_type */ - priv->mib_buf.data.data[2] = 0; /* ckip_key_permutation */ + at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, + le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), + le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); + at76_dbg(DBG_DEVSTART, "firmware id %s", str); - ret = at76_set_mib(priv, &priv->mib_buf); - if (ret != CMD_STATUS_COMPLETE) - goto exit; - ret = 0; - }; exit: - at76_dump_mib_mac_encryption(priv); - mutex_unlock(&priv->mtx); - return ret; -} - -static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, - struct ieee80211_key_conf *key) -{ - struct at76_priv *priv = hw->priv; - - at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d " - "key->keylen %d", - __func__, cmd, key->alg, key->keyidx, key->keylen); + mutex_unlock(&fw_mutex); - if (FIRMWARE_IS_WPA(priv->fw_version)) - return at76_set_key_newfw(hw, cmd, local_address, address, key); + if (fwe->loaded) + return fwe; else - return at76_set_key_oldfw(hw, cmd, local_address, address, key); - + return NULL; } -static const struct ieee80211_ops at76_ops = { - .tx = at76_mac80211_tx, - .add_interface = at76_add_interface, - .remove_interface = at76_remove_interface, - .config = at76_config, - .config_interface = at76_config_interface, - .configure_filter = at76_configure_filter, - .start = at76_mac80211_start, - .stop = at76_mac80211_stop, - .hw_scan = at76_hw_scan, - .set_key = at76_set_key, -}; - /* Allocate network device and initialize private data */ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) { - struct ieee80211_hw *hw; + struct net_device *netdev; struct at76_priv *priv; + int i; - hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops); - if (!hw) { - printk(KERN_ERR DRIVER_NAME ": could not register" - " ieee80211_hw\n"); + /* allocate memory for our device state and initialize it */ + netdev = alloc_etherdev(sizeof(struct at76_priv)); + if (!netdev) { + dev_printk(KERN_ERR, &udev->dev, "out of memory\n"); return NULL; } - priv = hw->priv; - priv->hw = hw; + priv = netdev_priv(netdev); priv->udev = udev; + priv->netdev = netdev; mutex_init(&priv->mtx); + INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done); + INIT_WORK(&priv->work_join, at76_work_join); + INIT_WORK(&priv->work_new_bss, at76_work_new_bss); + INIT_WORK(&priv->work_start_scan, at76_work_start_scan); INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc); INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx); - INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan); + INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart); + INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan); + INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon); + INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth); + INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc); + + spin_lock_init(&priv->mgmt_spinlock); + priv->next_mgmt_bulk = NULL; + priv->mac_state = MAC_INIT; + + /* initialize empty BSS list */ + priv->curr_bss = NULL; + INIT_LIST_HEAD(&priv->bss_list); + spin_lock_init(&priv->bss_list_spinlock); + + init_timer(&priv->bss_list_timer); + priv->bss_list_timer.data = (unsigned long)priv; + priv->bss_list_timer.function = at76_bss_list_timeout; + + spin_lock_init(&priv->spy_spinlock); + + /* mark all rx data entries as unused */ + for (i = 0; i < NR_RX_DATA_BUF; i++) + priv->rx_data[i].skb = NULL; priv->rx_tasklet.func = at76_rx_tasklet; priv->rx_tasklet.data = 0; @@ -2371,9 +5197,6 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) priv->pm_mode = AT76_PM_OFF; priv->pm_period = 0; - /* unit us */ - priv->hw->channel_change_time = 100000; - return priv; } @@ -2436,42 +5259,11 @@ static int at76_alloc_urbs(struct at76_priv *priv, return 0; } -static struct ieee80211_rate at76_rates[] = { - { .bitrate = 10, .hw_value = TX_RATE_1MBIT, }, - { .bitrate = 20, .hw_value = TX_RATE_2MBIT, }, - { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, }, - { .bitrate = 110, .hw_value = TX_RATE_11MBIT, }, -}; - -static struct ieee80211_channel at76_channels[] = { - { .center_freq = 2412, .hw_value = 1 }, - { .center_freq = 2417, .hw_value = 2 }, - { .center_freq = 2422, .hw_value = 3 }, - { .center_freq = 2427, .hw_value = 4 }, - { .center_freq = 2432, .hw_value = 5 }, - { .center_freq = 2437, .hw_value = 6 }, - { .center_freq = 2442, .hw_value = 7 }, - { .center_freq = 2447, .hw_value = 8 }, - { .center_freq = 2452, .hw_value = 9 }, - { .center_freq = 2457, .hw_value = 10 }, - { .center_freq = 2462, .hw_value = 11 }, - { .center_freq = 2467, .hw_value = 12 }, - { .center_freq = 2472, .hw_value = 13 }, - { .center_freq = 2484, .hw_value = 14 } -}; - -static struct ieee80211_supported_band at76_supported_band = { - .channels = at76_channels, - .n_channels = ARRAY_SIZE(at76_channels), - .bitrates = at76_rates, - .n_bitrates = ARRAY_SIZE(at76_rates), -}; - /* Register network device and initialize the hardware */ static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) { - struct device *dev = &interface->dev; + struct net_device *netdev = priv->netdev; int ret; /* set up the endpoint information */ @@ -2487,11 +5279,14 @@ static int at76_init_new_device(struct at76_priv *priv, /* MAC address */ ret = at76_get_hw_config(priv); if (ret < 0) { - dev_err(dev, "cannot get MAC address\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot get MAC address\n"); goto exit; } priv->domain = at76_get_reg_domain(priv->regulatory_domain); + /* init. netdev->dev_addr */ + memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN); priv->channel = DEF_CHANNEL; priv->iw_mode = IW_MODE_INFRA; @@ -2501,54 +5296,47 @@ static int at76_init_new_device(struct at76_priv *priv, priv->txrate = TX_RATE_AUTO; priv->preamble_type = PREAMBLE_TYPE_LONG; priv->beacon_period = 100; + priv->beacons_last_qual = jiffies; priv->auth_mode = WLAN_AUTH_OPEN; priv->scan_min_time = DEF_SCAN_MIN_TIME; priv->scan_max_time = DEF_SCAN_MAX_TIME; priv->scan_mode = SCAN_TYPE_ACTIVE; - priv->default_pairwise_key = 0xff; - priv->default_group_key = 0xff; - - /* mac80211 initialisation */ - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band; - if (FIRMWARE_IS_WPA(priv->fw_version) && - (at76_is_503rfmd(priv->board_type) || - at76_is_505(priv->board_type))) - priv->hw->flags = IEEE80211_HW_SIGNAL_UNSPEC; - else - priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - - priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - SET_IEEE80211_DEV(priv->hw, &interface->dev); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - - ret = ieee80211_register_hw(priv->hw); + netdev->flags &= ~IFF_MULTICAST; /* not yet or never */ + netdev->open = at76_open; + netdev->stop = at76_stop; + netdev->get_stats = at76_get_stats; + netdev->ethtool_ops = &at76_ethtool_ops; + + /* Add pointers to enable iwspy support. */ + priv->wireless_data.spy_data = &priv->spy_data; + netdev->wireless_data = &priv->wireless_data; + + netdev->hard_start_xmit = at76_tx; + netdev->tx_timeout = at76_tx_timeout; + netdev->watchdog_timeo = 2 * HZ; + netdev->wireless_handlers = &at76_handler_def; + netdev->set_multicast_list = at76_set_multicast; + netdev->set_mac_address = at76_set_mac_address; + dev_alloc_name(netdev, "wlan%d"); + + ret = register_netdev(priv->netdev); if (ret) { - dev_err(dev, "cannot register mac80211 hw (status %d)!\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "cannot register netdevice (status %d)!\n", ret); goto exit; } + priv->netdev_registered = 1; - priv->mac80211_registered = 1; + printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", + netdev->name, dev_name(&interface->dev), mac2str(priv->mac_addr), + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name, + priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n", - wiphy_name(priv->hw->wiphy), - dev_name(&interface->dev), mac2str(priv->mac_addr), - priv->fw_version.major, priv->fw_version.minor, - priv->fw_version.patch, priv->fw_version.build); - dev_info(dev, "%s: regulatory domain 0x%02x: %s\n", - wiphy_name(priv->hw->wiphy), - priv->regulatory_domain, priv->domain->name); - dev_info(dev, "%s: WPA support: ", wiphy_name(priv->hw->wiphy)); - if (!FIRMWARE_IS_WPA(priv->fw_version)) - printk("none\n"); - else { - if (!at76_is_505a(priv->board_type)) - printk("TKIP\n"); - else - printk("TKIP, AES/CCMP\n"); - }; + /* we let this timer run the whole time this driver instance lives */ + mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT); exit: return ret; @@ -2556,13 +5344,15 @@ exit: static void at76_delete_device(struct at76_priv *priv) { + int i; + at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); /* The device is gone, don't bother turning it off */ priv->device_unplugged = 1; - if (priv->mac80211_registered) - ieee80211_unregister_hw(priv->hw); + if (priv->netdev_registered) + unregister_netdev(priv->netdev); /* assuming we used keventd, it must quiesce too */ flush_scheduled_work(); @@ -2583,11 +5373,25 @@ static void at76_delete_device(struct at76_priv *priv) if (priv->rx_skb) kfree_skb(priv->rx_skb); + at76_free_bss_list(priv); + del_timer_sync(&priv->bss_list_timer); + cancel_delayed_work(&priv->dwork_get_scan); + cancel_delayed_work(&priv->dwork_beacon); + cancel_delayed_work(&priv->dwork_auth); + cancel_delayed_work(&priv->dwork_assoc); + + if (priv->mac_state == MAC_CONNECTED) + at76_iwevent_bss_disconnect(priv->netdev); + + for (i = 0; i < NR_RX_DATA_BUF; i++) + if (priv->rx_data[i].skb) { + dev_kfree_skb(priv->rx_data[i].skb); + priv->rx_data[i].skb = NULL; + } usb_put_dev(priv->udev); - at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw", - __func__); - ieee80211_free_hw(priv->hw); + at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__); + free_netdev(priv->netdev); /* priv is in netdev */ at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); } @@ -2621,8 +5425,8 @@ static int at76_probe(struct usb_interface *interface, we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */ if (op_mode == OPMODE_HW_CONFIG_MODE) { - dev_err(&interface->dev, - "cannot handle a device in HW_CONFIG_MODE\n"); + dev_printk(KERN_ERR, &interface->dev, + "cannot handle a device in HW_CONFIG_MODE\n"); ret = -EBUSY; goto error; } @@ -2630,12 +5434,13 @@ static int at76_probe(struct usb_interface *interface, if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { /* download internal firmware part */ - dev_dbg(&interface->dev, "downloading internal firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading internal firmware\n"); ret = at76_load_internal_fw(udev, fwe); if (ret < 0) { - dev_err(&interface->dev, - "error %d downloading internal firmware\n", - ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d downloading internal firmware\n", + ret); goto error; } usb_put_dev(udev); @@ -2660,7 +5465,8 @@ static int at76_probe(struct usb_interface *interface, need_ext_fw = 1; if (need_ext_fw) { - dev_dbg(&interface->dev, "downloading external firmware\n"); + dev_printk(KERN_DEBUG, &interface->dev, + "downloading external firmware\n"); ret = at76_load_external_fw(udev, fwe); if (ret) @@ -2669,8 +5475,8 @@ static int at76_probe(struct usb_interface *interface, /* Re-check firmware version */ ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv)); if (ret < 0) { - dev_err(&interface->dev, - "error %d getting firmware version\n", ret); + dev_printk(KERN_ERR, &interface->dev, + "error %d getting firmware version\n", ret); goto error; } } @@ -2681,6 +5487,7 @@ static int at76_probe(struct usb_interface *interface, goto error; } + SET_NETDEV_DEV(priv->netdev, &interface->dev); usb_set_intfdata(interface, priv); memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version)); @@ -2708,7 +5515,7 @@ static void at76_disconnect(struct usb_interface *interface) if (!priv) return; - printk(KERN_INFO "%s: disconnecting\n", wiphy_name(priv->hw->wiphy)); + printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name); at76_delete_device(priv); dev_printk(KERN_INFO, &interface->dev, "disconnected\n"); } @@ -2764,8 +5571,5 @@ MODULE_AUTHOR("Alex <alex@foogod.com>"); MODULE_AUTHOR("Nick Jones"); MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>"); MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); -MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>"); -MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>"); -MODULE_AUTHOR("Milan Plzik <milan.plzik@gmail.com>"); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/staging/at76_usb/at76_usb.h b/drivers/staging/at76_usb/at76_usb.h index 8bb352f16d4..b20be9da1fa 100644 --- a/drivers/staging/at76_usb/at76_usb.h +++ b/drivers/staging/at76_usb/at76_usb.h @@ -34,6 +34,23 @@ enum board_type { BOARD_505AMX = 8 }; +/* our private ioctl's */ +/* preamble length (0 - long, 1 - short, 2 - auto) */ +#define AT76_SET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 0) +#define AT76_GET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 1) +/* which debug channels are enabled */ +#define AT76_SET_DEBUG (SIOCIWFIRSTPRIV + 2) +#define AT76_GET_DEBUG (SIOCIWFIRSTPRIV + 3) +/* power save mode (incl. the Atmel proprietary smart save mode) */ +#define AT76_SET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 4) +#define AT76_GET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 5) +/* min and max channel times for scan */ +#define AT76_SET_SCAN_TIMES (SIOCIWFIRSTPRIV + 6) +#define AT76_GET_SCAN_TIMES (SIOCIWFIRSTPRIV + 7) +/* scan mode (0 - active, 1 - passive) */ +#define AT76_SET_SCAN_MODE (SIOCIWFIRSTPRIV + 8) +#define AT76_GET_SCAN_MODE (SIOCIWFIRSTPRIV + 9) + #define CMD_STATUS_IDLE 0x00 #define CMD_STATUS_COMPLETE 0x01 #define CMD_STATUS_UNKNOWN 0x02 @@ -65,7 +82,6 @@ enum board_type { #define MIB_MAC 0x03 #define MIB_MAC_MGMT 0x05 #define MIB_MAC_WEP 0x06 -#define MIB_MAC_ENCRYPTION 0x06 #define MIB_PHY 0x07 #define MIB_FW_VERSION 0x08 #define MIB_MDOMAIN 0x09 @@ -90,26 +106,6 @@ enum board_type { #define AT76_PM_ON 2 #define AT76_PM_SMART 3 -/* cipher values for encryption keys */ -#define CIPHER_NONE 0 /* this value is only guessed */ -#define CIPHER_WEP64 1 -#define CIPHER_TKIP 2 -#define CIPHER_CCMP 3 -#define CIPHER_CCX 4 /* for consistency sake only */ -#define CIPHER_WEP128 5 - -/* bit flags key types for encryption keys */ -#define KEY_PAIRWISE 2 -#define KEY_TX 4 - -#define CIPHER_KEYS (4) -#define CIPHER_KEY_LEN (40) - -struct key_config { - u8 cipher; - u8 keylen; -}; - struct hwcfg_r505 { u8 cr39_values[14]; u8 reserved1[14]; @@ -151,9 +147,6 @@ union at76_hwcfg { #define WEP_SMALL_KEY_LEN (40 / 8) #define WEP_LARGE_KEY_LEN (104 / 8) -#define WEP_KEYS (4) - - struct at76_card_config { u8 exclude_unencrypted; @@ -168,7 +161,7 @@ struct at76_card_config { u8 privacy_invoked; u8 wep_default_key_id; /* 0..3 */ u8 current_ssid[32]; - u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN]; + u8 wep_default_key_value[4][WEP_KEY_LEN]; u8 ssid_len; u8 short_preamble; __le16 beacon_period; @@ -193,7 +186,7 @@ struct at76_rx_buffer { u8 link_quality; u8 noise_level; __le32 rx_time; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* Length of Atmel-specific Tx header before 802.11 frame */ @@ -203,11 +196,8 @@ struct at76_tx_buffer { __le16 wlength; u8 tx_rate; u8 padding; - u8 key_id; - u8 cipher_type; - u8 cipher_length; - u8 reserved; - u8 packet[IEEE80211_MAX_FRAG_THRESHOLD]; + u8 reserved[4]; + u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN]; } __attribute__((packed)); /* defines for scan_type below */ @@ -254,7 +244,6 @@ struct set_mib_buffer { u8 byte; __le16 word; u8 addr[ETH_ALEN]; - u8 data[256]; /* we need more space for mib_mac_encryption */ } data; } __attribute__((packed)); @@ -328,24 +317,10 @@ struct mib_mac_wep { u8 exclude_unencrypted; __le32 wep_icv_error_count; __le32 wep_excluded_count; - u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN]; + u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN]; u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */ } __attribute__((packed)); -struct mib_mac_encryption { - u8 cipher_default_keyvalue[CIPHER_KEYS][CIPHER_KEY_LEN]; - u8 tkip_bssid[6]; - u8 privacy_invoked; - u8 cipher_default_key_id; - u8 cipher_default_group_key_id; - u8 exclude_unencrypted; - u8 wep_encryption_type; - u8 ckip_key_permutation; /* bool */ - __le32 wep_icv_error_count; - __le32 wep_excluded_count; - u8 key_rsc[CIPHER_KEYS][8]; -} __attribute__((packed)); - struct mib_phy { __le32 ed_threshold; @@ -389,6 +364,16 @@ struct at76_fw_header { __le32 ext_fw_len; /* external firmware image length */ } __attribute__((packed)); +enum mac_state { + MAC_INIT, + MAC_SCANNING, + MAC_AUTH, + MAC_ASSOC, + MAC_JOINING, + MAC_CONNECTED, + MAC_OWN_IBSS +}; + /* a description of a regulatory domain and the allowed channels */ struct reg_domain { u16 code; @@ -396,6 +381,47 @@ struct reg_domain { u32 channel_map; /* if bit N is set, channel (N+1) is allowed */ }; +/* how long do we keep a (I)BSS in the bss_list in jiffies + this should be long enough for the user to retrieve the table + (by iwlist ?) after the device started, because all entries from + other channels than the one the device locks on get removed, too */ +#define BSS_LIST_TIMEOUT (120 * HZ) +/* struct to store BSS info found during scan */ +#define BSS_LIST_MAX_RATE_LEN 32 /* 32 rates should be enough ... */ + +struct bss_info { + struct list_head list; + + u8 bssid[ETH_ALEN]; /* bssid */ + u8 ssid[IW_ESSID_MAX_SIZE]; /* essid */ + u8 ssid_len; /* length of ssid above */ + u8 channel; + u16 capa; /* BSS capabilities */ + u16 beacon_interval; /* beacon interval, Kus (1024 microseconds) */ + u8 rates[BSS_LIST_MAX_RATE_LEN]; /* supported rates in units of + 500 kbps, ORed with 0x80 for + basic rates */ + u8 rates_len; + + /* quality of received beacon */ + u8 rssi; + u8 link_qual; + u8 noise_level; + + unsigned long last_rx; /* time (jiffies) of last beacon received */ +}; + +/* a rx data buffer to collect rx fragments */ +struct rx_data_buf { + u8 sender[ETH_ALEN]; /* sender address */ + u16 seqnr; /* sequence number */ + u16 fragnr; /* last fragment received */ + unsigned long last_rx; /* jiffies of last rx */ + struct sk_buff *skb; /* == NULL if entry is free */ +}; + +#define NR_RX_DATA_BUF 8 + /* Data for one loaded firmware file */ struct fwentry { const char *const fwname; @@ -412,9 +438,11 @@ struct fwentry { struct at76_priv { struct usb_device *udev; /* USB device pointer */ + struct net_device *netdev; /* net device pointer */ + struct net_device_stats stats; /* net device stats */ + struct iw_statistics wstats; /* wireless stats */ struct sk_buff *rx_skb; /* skbuff for receiving data */ - struct sk_buff *tx_skb; /* skbuff for transmitting data */ void *bulk_out_buffer; /* buffer for sending data */ struct urb *tx_urb; /* URB for sending data */ @@ -426,17 +454,26 @@ struct at76_priv { struct mutex mtx; /* locks this structure */ /* work queues */ + struct work_struct work_assoc_done; + struct work_struct work_join; + struct work_struct work_new_bss; + struct work_struct work_start_scan; struct work_struct work_set_promisc; struct work_struct work_submit_rx; - struct delayed_work dwork_hw_scan; + struct delayed_work dwork_restart; + struct delayed_work dwork_get_scan; + struct delayed_work dwork_beacon; + struct delayed_work dwork_auth; + struct delayed_work dwork_assoc; struct tasklet_struct rx_tasklet; /* the WEP stuff */ int wep_enabled; /* 1 if WEP is enabled */ int wep_key_id; /* key id to be used */ - u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN]; /* WEP keys */ - u8 wep_keys_len[WEP_KEYS]; /* length of WEP keys */ + u8 wep_keys[WEP_KEYS][WEP_KEY_LEN]; /* the four WEP keys, + 5 or 13 bytes are used */ + u8 wep_keys_len[WEP_KEYS]; /* the length of the above keys */ int channel; int iw_mode; @@ -458,13 +495,44 @@ struct at76_priv { int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */ int scan_need_any; /* if set, need to scan for any ESSID */ + /* the list we got from scanning */ + spinlock_t bss_list_spinlock; /* protects bss_list operations */ + struct list_head bss_list; /* list of BSS we got beacons from */ + struct timer_list bss_list_timer; /* timer to purge old entries + from bss_list */ + struct bss_info *curr_bss; /* current BSS */ u16 assoc_id; /* current association ID, if associated */ + u8 wanted_bssid[ETH_ALEN]; + int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */ + + /* some data for infrastructure mode only */ + spinlock_t mgmt_spinlock; /* this spinlock protects access to + next_mgmt_bulk */ + + struct at76_tx_buffer *next_mgmt_bulk; /* pending management msg to + send via bulk out */ + enum mac_state mac_state; + enum { + SCAN_IDLE, + SCAN_IN_PROGRESS, + SCAN_COMPLETED + } scan_state; + time_t last_scan; + + int retries; /* remaining retries in case of timeout when + * sending AuthReq or AssocReq */ u8 pm_mode; /* power management mode */ u32 pm_period; /* power management period in microseconds */ struct reg_domain const *domain; /* reg domain description */ + /* iwspy support */ + spinlock_t spy_spinlock; + struct iw_spy_data spy_data; + + struct iw_public_data wireless_data; + /* These fields contain HW config provided by the device (not all of * these fields are used by all board types) */ u8 mac_addr[ETH_ALEN]; @@ -472,6 +540,9 @@ struct at76_priv { struct at76_card_config card_config; + /* store rx fragments until complete */ + struct rx_data_buf rx_data[NR_RX_DATA_BUF]; + enum board_type board_type; struct mib_fw_version fw_version; @@ -479,20 +550,58 @@ struct at76_priv { unsigned int netdev_registered:1; struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */ + /* beacon counting */ int beacon_period; /* period of mgmt beacons, Kus */ + int beacons_received; + unsigned long beacons_last_qual; /* time we restarted counting + beacons */ +}; - struct ieee80211_hw *hw; - int mac80211_registered; - - struct key_config keys[4]; /* installed key types */ - u8 default_pairwise_key; - u8 default_group_key; +struct at76_rx_radiotap { + struct ieee80211_radiotap_header rt_hdr; + __le64 rt_tsft; + u8 rt_flags; + u8 rt_rate; + s8 rt_signal; + s8 rt_noise; }; -#define AT76_SUPPORTED_FILTERS FIF_PROMISC_IN_BSS +#define AT76_RX_RADIOTAP_PRESENT \ + ((1 << IEEE80211_RADIOTAP_TSFT) | \ + (1 << IEEE80211_RADIOTAP_FLAGS) | \ + (1 << IEEE80211_RADIOTAP_RATE) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \ + (1 << IEEE80211_RADIOTAP_DB_ANTNOISE)) + +#define BEACON_MAX_DATA_LENGTH 1500 + +/* the maximum size of an AssocReq packet */ +#define ASSOCREQ_MAX_SIZE \ + (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \ + 1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4) + +/* for shared secret auth, add the challenge text size */ +#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth)) + +/* Maximal number of AuthReq retries */ +#define AUTH_RETRIES 3 +/* Maximal number of AssocReq retries */ +#define ASSOC_RETRIES 3 + +/* Beacon timeout in managed mode when we are connected */ +#define BEACON_TIMEOUT (10 * HZ) + +/* Timeout for authentication response */ +#define AUTH_TIMEOUT (1 * HZ) + +/* Timeout for association response */ +#define ASSOC_TIMEOUT (1 * HZ) + +/* Polling interval when scan is running */ #define SCAN_POLL_INTERVAL (HZ / 4) +/* Command completion timeout */ #define CMD_COMPLETION_TIMEOUT (5 * HZ) #define DEF_RTS_THRESHOLD 1536 @@ -502,6 +611,8 @@ struct at76_priv { #define DEF_SCAN_MIN_TIME 10 #define DEF_SCAN_MAX_TIME 120 +#define MAX_RTS_THRESHOLD (MAX_FRAG_THRESHOLD + 1) + /* the max padding size for tx in bytes (see calc_padding) */ #define MAX_PADDING_SIZE 53 diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 5ffe269c238..ab69c1bf36a 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -622,7 +622,7 @@ static int set_ctrl_bits(void) } /* sets ctrl & data port bits according to current signals values */ -static void set_bits(void) +static void panel_set_bits(void) { set_data_bits(); set_ctrl_bits(); @@ -707,12 +707,12 @@ static void lcd_send_serial(int byte) */ for (bit = 0; bit < 8; bit++) { bits.cl = BIT_CLR; /* CLK low */ - set_bits(); + panel_set_bits(); bits.da = byte & 1; - set_bits(); + panel_set_bits(); udelay(2); /* maintain the data during 2 us before CLK up */ bits.cl = BIT_SET; /* CLK high */ - set_bits(); + panel_set_bits(); udelay(1); /* maintain the strobe during 1 us */ byte >>= 1; } @@ -727,7 +727,7 @@ static void lcd_backlight(int on) /* The backlight is activated by seting the AUTOFEED line to +5V */ spin_lock(&pprt_lock); bits.bl = on; - set_bits(); + panel_set_bits(); spin_unlock(&pprt_lock); } |