aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/cmx270_nand.c79
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c93
2 files changed, 74 insertions, 98 deletions
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index cb663ef245d..fc8529bedfd 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -20,9 +20,11 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
@@ -30,20 +32,6 @@
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
-/* This macro needed to ensure in-order operation of GPIO and local
- * bus. Without both asm command and dummy uncached read there're
- * states when NAND access is broken. I've looked for such macro(s) in
- * include/asm-arm but found nothing approptiate.
- * dmac_clean_range is close, but is makes cache invalidation
- * unnecessary here and it cannot be used in module
- */
-#define DRAIN_WB() \
- do { \
- unsigned char dummy; \
- asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
- dummy=*((unsigned char*)UNCACHED_ADDR); \
- } while(0)
-
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
@@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static inline void nand_cs_on(void)
{
- GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO_NAND_CS, 0);
}
static void nand_cs_off(void)
{
- DRAIN_WB();
+ dsb();
- GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+ gpio_set_value(GPIO_NAND_CS, 1);
}
/*
@@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
struct nand_chip* this = mtd->priv;
unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
- DRAIN_WB();
+ dsb();
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_ALE )
@@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
nand_cs_off();
}
- DRAIN_WB();
+ dsb();
this->IO_ADDR_W = (void __iomem*)nandaddr;
if (dat != NAND_CMD_NONE)
writel((dat << 16), this->IO_ADDR_W);
- DRAIN_WB();
+ dsb();
}
/*
@@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
*/
static int cmx270_device_ready(struct mtd_info *mtd)
{
- DRAIN_WB();
+ dsb();
- return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
+ return (gpio_get_value(GPIO_NAND_RB));
}
/*
@@ -168,20 +156,40 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
+ if (!machine_is_armcore())
+ return -ENODEV;
+
+ ret = gpio_request(GPIO_NAND_CS, "NAND CS");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND CS gpio\n");
+ return ret;
+ }
+
+ gpio_direction_output(GPIO_NAND_CS, 1);
+
+ ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND R/B gpio\n");
+ goto err_gpio_request;
+ }
+
+ gpio_direction_input(GPIO_NAND_RB);
+
/* Allocate memory for MTD device structure and private data */
cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
- printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
- return -ENOMEM;
+ pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
+ ret = -ENOMEM;
+ goto err_kzalloc;
}
cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
if (!cmx270_nand_io) {
- printk("Unable to ioremap NAND device\n");
+ pr_debug("Unable to ioremap NAND device\n");
ret = -EINVAL;
- goto err1;
+ goto err_ioremap;
}
/* Get pointer to private data */
@@ -209,9 +217,9 @@ static int cmx270_init(void)
/* Scan to find existence of the device */
if (nand_scan (cmx270_nand_mtd, 1)) {
- printk(KERN_NOTICE "No NAND device\n");
+ pr_notice("No NAND device\n");
ret = -ENXIO;
- goto err2;
+ goto err_scan;
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
@@ -229,18 +237,22 @@ static int cmx270_init(void)
}
/* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
+ pr_notice("Using %s partition definition\n", part_type);
ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
if (ret)
- goto err2;
+ goto err_scan;
/* Return happy */
return 0;
-err2:
+err_scan:
iounmap(cmx270_nand_io);
-err1:
+err_ioremap:
kfree(cmx270_nand_mtd);
+err_kzalloc:
+ gpio_free(GPIO_NAND_RB);
+err_gpio_request:
+ gpio_free(GPIO_NAND_CS);
return ret;
@@ -255,6 +267,9 @@ static void cmx270_cleanup(void)
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
+ gpio_free(GPIO_NAND_RB);
+ gpio_free(GPIO_NAND_CS);
+
iounmap(cmx270_nand_io);
/* Free the MTD device structure */
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index f123fce65f2..bb95db7d2b7 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -5,83 +5,60 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Compulab Ltd., 2003, 2007
+ * Compulab Ltd., 2003, 2007, 2008
* Mike Rapoport <mike@compulab.co.il>
*
*/
-#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
-#include <pcmcia/ss.h>
-#include <asm/hardware.h>
#include <asm/mach-types.h>
-
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/cm-x270.h>
#include "soc_common.h"
+#define GPIO_PCMCIA_S0_CD_VALID (84)
+#define GPIO_PCMCIA_S0_RDYINT (82)
+#define GPIO_PCMCIA_RESET (53)
+
+#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+
+
static struct pcmcia_irqs irqs[] = {
{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
- { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) |
- GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) |
- GPIO_bit(GPIO85_nPCE_1) |
- GPIO_bit(GPIO54_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO85_nPCE_1_MD);
- pxa_gpio_mode(GPIO54_nPCE_2_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
- /* Reset signal */
- pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
- GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-
- set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
- set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
-
- /* irq's for slots: */
- set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
- set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
-
- skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(GPIO_PCMCIA_RESET, 0);
+
+ skt->irq = PCMCIA_S0_RDYINT;
+ ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (!ret)
+ gpio_free(GPIO_PCMCIA_RESET);
+
+ return ret;
}
static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
-
- set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
- set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
-
- set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
- set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
+ gpio_free(GPIO_PCMCIA_RESET);
}
static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
- state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
+ state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
+ state->ready = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 0;
@@ -93,32 +70,16 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
- pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
-
switch (skt->nr) {
case 0:
if (state->flags & SS_RESET) {
- GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
- GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
- udelay(10);
- GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
- GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
- }
- break;
- case 1:
- if (state->flags & SS_RESET) {
- GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
- GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
+ gpio_set_value(GPIO_PCMCIA_RESET, 1);
udelay(10);
- GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
- GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
+ gpio_set_value(GPIO_PCMCIA_RESET, 0);
}
break;
}
- pxa_gpio_mode(GPIO49_nPWE_MD);
-
return 0;
}
@@ -139,7 +100,7 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.configure_socket = cmx270_pcmcia_configure_socket,
.socket_init = cmx270_pcmcia_socket_init,
.socket_suspend = cmx270_pcmcia_socket_suspend,
- .nr = 2,
+ .nr = 1,
};
static struct platform_device *cmx270_pcmcia_device;
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 11:47:30 +0000