aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/Kconfig4
-rw-r--r--drivers/scsi/seagate.c17
-rw-r--r--drivers/scsi/seagate.h19
3 files changed, 11 insertions, 29 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c4dfcc91ddd..d76c8697913 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1260,8 +1260,8 @@ config SCSI_SEAGATE
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>. If it
- doesn't work out of the box, you may have to change some settings in
- <file:drivers/scsi/seagate.h>.
+ doesn't work out of the box, you may have to change some macros at
+ compiletime, which are described in <file:drivers/scsi/seagate.c>.
To compile this driver as a module, choose M here: the
module will be called seagate.
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 2679ea8bff1..e8f146d361c 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -106,7 +106,6 @@
#include "scsi.h"
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_host.h>
-#include "seagate.h"
#include <scsi/scsi_ioctl.h>
@@ -322,6 +321,7 @@ static Signature __initdata signatures[] = {
static int hostno = -1;
static void seagate_reconnect_intr (int, void *, struct pt_regs *);
static irqreturn_t do_seagate_reconnect_intr (int, void *, struct pt_regs *);
+static int seagate_st0x_bus_reset(struct scsi_cmnd *);
#ifdef FAST
static int fast = 1;
@@ -585,8 +585,8 @@ static int linked_connected = 0;
static unsigned char linked_target, linked_lun;
#endif
-static void (*done_fn) (Scsi_Cmnd *) = NULL;
-static Scsi_Cmnd *SCint = NULL;
+static void (*done_fn) (struct scsi_cmnd *) = NULL;
+static struct scsi_cmnd *SCint = NULL;
/*
* These control whether or not disconnect / reconnect will be attempted,
@@ -633,7 +633,7 @@ static irqreturn_t do_seagate_reconnect_intr(int irq, void *dev_id,
static void seagate_reconnect_intr (int irq, void *dev_id, struct pt_regs *regs)
{
int temp;
- Scsi_Cmnd *SCtmp;
+ struct scsi_cmnd *SCtmp;
DPRINTK (PHASE_RESELECT, "scsi%d : seagate_reconnect_intr() called\n", hostno);
@@ -675,10 +675,11 @@ static void seagate_reconnect_intr (int irq, void *dev_id, struct pt_regs *regs)
static int recursion_depth = 0;
-static int seagate_st0x_queue_command (Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int seagate_st0x_queue_command(struct scsi_cmnd * SCpnt,
+ void (*done) (struct scsi_cmnd *))
{
int result, reconnect;
- Scsi_Cmnd *SCtmp;
+ struct scsi_cmnd *SCtmp;
DANY ("seagate: que_command");
done_fn = done;
@@ -1609,7 +1610,7 @@ connect_loop:
return retcode (st0x_aborted);
} /* end of internal_command */
-static int seagate_st0x_abort (Scsi_Cmnd * SCpnt)
+static int seagate_st0x_abort(struct scsi_cmnd * SCpnt)
{
st0x_aborted = DID_ABORT;
return SUCCESS;
@@ -1624,7 +1625,7 @@ static int seagate_st0x_abort (Scsi_Cmnd * SCpnt)
* May be called with SCpnt = NULL
*/
-static int seagate_st0x_bus_reset(Scsi_Cmnd * SCpnt)
+static int seagate_st0x_bus_reset(struct scsi_cmnd * SCpnt)
{
/* No timeouts - this command is going to fail because it was reset. */
DANY ("scsi%d: Reseting bus... ", hostno);
diff --git a/drivers/scsi/seagate.h b/drivers/scsi/seagate.h
deleted file mode 100644
index fb5f380fa4b..00000000000
--- a/drivers/scsi/seagate.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * seagate.h Copyright (C) 1992 Drew Eckhardt
- * low level scsi driver header for ST01/ST02 by
- * Drew Eckhardt
- *
- * <drew@colorado.edu>
- */
-
-#ifndef _SEAGATE_H
-#define SEAGATE_H
-
-static int seagate_st0x_detect(struct scsi_host_template *);
-static int seagate_st0x_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-
-static int seagate_st0x_abort(Scsi_Cmnd *);
-static const char *seagate_st0x_info(struct Scsi_Host *);
-static int seagate_st0x_bus_reset(Scsi_Cmnd *);
-
-#endif /* _SEAGATE_H */