diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/host/ohci-pxa27x.c | 85 |
1 files changed, 43 insertions, 42 deletions
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 9d65ec30799..c165d1ebed5 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -26,18 +26,12 @@ #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/arch/pxa-regs.h> - - -#define PMM_NPS_MODE 1 -#define PMM_GLOBAL_MODE 2 -#define PMM_PERPORT_MODE 3 +#include <asm/arch/ohci.h> #define PXA_UHC_MAX_PORTNUM 3 #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) -static int pxa27x_ohci_pmm_state; - /* PMM_NPS_MODE -- PMM Non-power switching mode Ports are powered continuously. @@ -50,8 +44,6 @@ static int pxa27x_ohci_pmm_state; */ static int pxa27x_ohci_select_pmm( int mode ) { - pxa27x_ohci_pmm_state = mode; - switch ( mode ) { case PMM_NPS_MODE: UHCRHDA |= RH_A_NPS; @@ -71,7 +63,6 @@ static int pxa27x_ohci_select_pmm( int mode ) "Invalid mode %d, set to non-power switch mode.\n", mode ); - pxa27x_ohci_pmm_state = PMM_NPS_MODE; UHCRHDA |= RH_A_NPS; } @@ -82,8 +73,13 @@ extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static void pxa27x_start_hc(struct platform_device *dev) +static int pxa27x_start_hc(struct device *dev) { + int retval = 0; + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + pxa_set_cken(CKEN10_USBHOST, 1); UHCHR |= UHCHR_FHR; @@ -94,21 +90,11 @@ static void pxa27x_start_hc(struct platform_device *dev) while (UHCHR & UHCHR_FSBIR) cpu_relax(); - /* This could be properly abstracted away through the - device data the day more machines are supported and - their differences can be figured out correctly. */ - if (machine_is_mainstone()) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. Supply power to USB ports. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + if (inf->init) + retval = inf->init(dev); - pxa27x_ohci_pmm_state = PMM_PERPORT_MODE; - } + if (retval < 0) + return retval; UHCHR &= ~UHCHR_SSE; @@ -117,10 +103,19 @@ static void pxa27x_start_hc(struct platform_device *dev) /* Clear any OTG Pin Hold */ if (PSSR & PSSR_OTGPH) PSSR |= PSSR_OTGPH; + + return 0; } -static void pxa27x_stop_hc(struct platform_device *dev) +static void pxa27x_stop_hc(struct device *dev) { + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + + if (inf->exit) + inf->exit(dev); + UHCHR |= UHCHR_FHR; udelay(11); UHCHR &= ~UHCHR_FHR; @@ -147,22 +142,27 @@ static void pxa27x_stop_hc(struct platform_device *dev) * through the hotplug entry's driver_data. * */ -int usb_hcd_pxa27x_probe (const struct hc_driver *driver, - struct platform_device *dev) +int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval; struct usb_hcd *hcd; + struct pxaohci_platform_data *inf; + + inf = pdev->dev.platform_data; - if (dev->resource[1].flags != IORESOURCE_IRQ) { + if (!inf) + return -ENODEV; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug ("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; } - hcd = usb_create_hcd (driver, &dev->dev, "pxa27x"); + hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); @@ -177,18 +177,22 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, goto err2; } - pxa27x_start_hc(dev); + if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) { + pr_debug("pxa27x_start_hc failed"); + goto err3; + } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state); + pxa27x_ohci_select_pmm(inf->port_mode); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); if (retval == 0) return retval; - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); + err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -211,10 +215,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, * context, normally "rmmod", "apmd", or something similar. * */ -void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev) +void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -292,15 +296,12 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) { - int ret; - pr_debug ("In ohci_hcd_pxa27x_drv_probe"); if (usb_disabled()) return -ENODEV; - ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); - return ret; + return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); } static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) |