diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/pata_platform.c | 3 | ||||
| -rw-r--r-- | drivers/kvm/svm.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/cafe.c | 1 | ||||
| -rw-r--r-- | drivers/scsi/pcmcia/sym53c500_cs.c | 2 | ||||
| -rw-r--r-- | drivers/serial/amba-pl010.c | 2 | ||||
| -rw-r--r-- | drivers/serial/amba-pl011.c | 2 | ||||
| -rw-r--r-- | drivers/serial/atmel_serial.c | 7 | ||||
| -rw-r--r-- | drivers/serial/atmel_serial.h | 2 |
8 files changed, 13 insertions, 8 deletions
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 443b1d85c6c..40ae11cbfda 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -30,7 +30,7 @@ static int pio_mask = 1; * Provide our own set_mode() as we don't want to change anything that has * already been configured.. */ -static void pata_platform_set_mode(struct ata_port *ap) +static int pata_platform_set_mode(struct ata_port *ap, struct ata_device **unused) { int i; @@ -44,6 +44,7 @@ static void pata_platform_set_mode(struct ata_port *ap) dev->flags |= ATA_DFLAG_PIO; } } + return 0; } static void pata_platform_host_stop(struct ata_host *host) diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c index 9c70ff65e6b..c79df79307e 100644 --- a/drivers/kvm/svm.c +++ b/drivers/kvm/svm.c @@ -1163,7 +1163,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data) case MSR_K6_STAR: vcpu->svm->vmcb->save.star = data; break; -#ifdef CONFIG_X86_64_ +#ifdef CONFIG_X86_64 case MSR_LSTAR: vcpu->svm->vmcb->save.lstar = data; break; diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c index b8d9b64cccc..65f9bd3ceeb 100644 --- a/drivers/mtd/nand/cafe.c +++ b/drivers/mtd/nand/cafe.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #define CAFE_NAND_CTRL1 0x00 diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 9fb0ea5c1fb..5b458d2478f 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -545,8 +545,6 @@ SYM53C500_release(struct pcmcia_device *link) */ if (shost->irq) free_irq(shost->irq, shost); - if (shost->dma_channel != 0xff) - free_dma(shost->dma_channel); if (shost->io_port && shost->n_io_port) release_region(shost->io_port, shost->n_io_port); diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 61db6973755..f69bd097166 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -589,6 +589,8 @@ static int __init pl010_console_setup(struct console *co, char *options) */ if (co->index >= UART_NR) co->index = 0; + if (!amba_ports[co->index]) + return -ENODEV; port = &amba_ports[co->index]->port; if (options) diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 9a3b374b2a0..44639e71372 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -661,6 +661,8 @@ static int __init pl011_console_setup(struct console *co, char *options) if (co->index >= UART_NR) co->index = 0; uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; uap->port.uartclk = clk_get_rate(uap->clk); diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index ed7f7209ea5..881f886b91c 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -689,9 +689,9 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct struct atmel_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; - port->fifosize = 1; + port->fifosize = 1; port->line = pdev->id; port->dev = &pdev->dev; @@ -890,7 +890,6 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) enable_irq_wake(port->irq); else { - disable_irq_wake(port->irq); uart_suspend_port(&atmel_uart, port); atmel_port->suspended = 1; } @@ -907,6 +906,8 @@ static int atmel_serial_resume(struct platform_device *pdev) uart_resume_port(&atmel_uart, port); atmel_port->suspended = 0; } + else + disable_irq_wake(port->irq); return 0; } diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h index fe1763b2a6d..11b44360e10 100644 --- a/drivers/serial/atmel_serial.h +++ b/drivers/serial/atmel_serial.h @@ -106,7 +106,7 @@ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */ +#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ |