diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 98 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.h | 49 |
2 files changed, 129 insertions, 18 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 0b738243782..7de267e1445 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -60,6 +60,12 @@ static struct pci_device_id megasas_pci_table[] = { PCI_ANY_ID, }, { + PCI_VENDOR_ID_LSI_LOGIC, + PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP + PCI_ANY_ID, + PCI_ANY_ID, + }, + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5, // xscale IOP PCI_ANY_ID, @@ -199,6 +205,86 @@ static struct megasas_instance_template megasas_instance_template_xscale = { */ /** +* The following functions are defined for ppc (deviceid : 0x60) +* controllers +*/ + +/** + * megasas_enable_intr_ppc - Enables interrupts + * @regs: MFI register set + */ +static inline void +megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs) +{ + writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear); + + writel(~0x80000004, &(regs)->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_read_fw_status_reg_ppc - returns the current FW status value + * @regs: MFI register set + */ +static u32 +megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs) +{ + return readl(&(regs)->outbound_scratch_pad); +} + +/** + * megasas_clear_interrupt_ppc - Check & clear interrupt + * @regs: MFI register set + */ +static int +megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) +{ + u32 status; + /* + * Check if it is our interrupt + */ + status = readl(®s->outbound_intr_status); + + if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) { + return 1; + } + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, ®s->outbound_doorbell_clear); + + return 0; +} +/** + * megasas_fire_cmd_ppc - Sends command to the FW + * @frame_phys_addr : Physical address of cmd + * @frame_count : Number of frames for the command + * @regs : MFI register set + */ +static inline void +megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count, struct megasas_register_set __iomem *regs) +{ + writel((frame_phys_addr | (frame_count<<1))|1, + &(regs)->inbound_queue_port); +} + +static struct megasas_instance_template megasas_instance_template_ppc = { + + .fire_cmd = megasas_fire_cmd_ppc, + .enable_intr = megasas_enable_intr_ppc, + .clear_intr = megasas_clear_intr_ppc, + .read_fw_status_reg = megasas_read_fw_status_reg_ppc, +}; + +/** +* This is the end of set of functions & definitions +* specific to ppc (deviceid : 0x60) controllers +*/ + +/** * megasas_disable_intr - Disables interrupts * @regs: MFI register set */ @@ -1607,7 +1693,17 @@ static int megasas_init_mfi(struct megasas_instance *instance) reg_set = instance->reg_set; - instance->instancet = &megasas_instance_template_xscale; + switch(instance->pdev->device) + { + case PCI_DEVICE_ID_LSI_SAS1078R: + instance->instancet = &megasas_instance_template_ppc; + break; + case PCI_DEVICE_ID_LSI_SAS1064R: + case PCI_DEVICE_ID_DELL_PERC5: + default: + instance->instancet = &megasas_instance_template_xscale; + break; + } /* * We expect the FW state to be READY diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 917326f3770..89639f0c38e 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -20,7 +20,7 @@ */ #define MEGASAS_VERSION "00.00.02.04" #define MEGASAS_RELDATE "Feb 03, 2006" -#define MEGASAS_EXT_VERSION "Fri Feb 03 14:16:25 PST 2006" +#define MEGASAS_EXT_VERSION "Fri Feb 03 14:31:44 PST 2006" /* * ===================================== * MegaRAID SAS MFI firmware definitions @@ -553,31 +553,46 @@ struct megasas_ctrl_info { #define MFI_OB_INTR_STATUS_MASK 0x00000002 #define MFI_POLL_TIMEOUT_SECS 10 +#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 +#define PCI_DEVICE_ID_LSI_SAS1078R 0x00000060 + struct megasas_register_set { + u32 reserved_0[4]; /*0000h*/ - u32 reserved_0[4]; /*0000h */ + u32 inbound_msg_0; /*0010h*/ + u32 inbound_msg_1; /*0014h*/ + u32 outbound_msg_0; /*0018h*/ + u32 outbound_msg_1; /*001Ch*/ - u32 inbound_msg_0; /*0010h */ - u32 inbound_msg_1; /*0014h */ - u32 outbound_msg_0; /*0018h */ - u32 outbound_msg_1; /*001Ch */ + u32 inbound_doorbell; /*0020h*/ + u32 inbound_intr_status; /*0024h*/ + u32 inbound_intr_mask; /*0028h*/ - u32 inbound_doorbell; /*0020h */ - u32 inbound_intr_status; /*0024h */ - u32 inbound_intr_mask; /*0028h */ + u32 outbound_doorbell; /*002Ch*/ + u32 outbound_intr_status; /*0030h*/ + u32 outbound_intr_mask; /*0034h*/ - u32 outbound_doorbell; /*002Ch */ - u32 outbound_intr_status; /*0030h */ - u32 outbound_intr_mask; /*0034h */ + u32 reserved_1[2]; /*0038h*/ - u32 reserved_1[2]; /*0038h */ + u32 inbound_queue_port; /*0040h*/ + u32 outbound_queue_port; /*0044h*/ - u32 inbound_queue_port; /*0040h */ - u32 outbound_queue_port; /*0044h */ + u32 reserved_2[22]; /*0048h*/ - u32 reserved_2; /*004Ch */ + u32 outbound_doorbell_clear; /*00A0h*/ - u32 index_registers[1004]; /*0050h */ + u32 reserved_3[3]; /*00A4h*/ + + u32 outbound_scratch_pad ; /*00B0h*/ + + u32 reserved_4[3]; /*00B4h*/ + + u32 inbound_low_queue_port ; /*00C0h*/ + + u32 inbound_high_queue_port ; /*00C4h*/ + + u32 reserved_5; /*00C8h*/ + u32 index_registers[820]; /*00CCh*/ } __attribute__ ((packed)); |