diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/acpi/processor_core.c | 37 | ||||
-rw-r--r-- | drivers/acpi/processor_idle.c | 105 | ||||
-rw-r--r-- | drivers/acpi/processor_perflib.c | 33 |
3 files changed, 109 insertions, 66 deletions
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index f4778747e88..e421842888b 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -256,6 +256,43 @@ acpi_processor_errata ( /* -------------------------------------------------------------------------- + Common ACPI processor fucntions + -------------------------------------------------------------------------- */ + +/* + * _PDC is required for a BIOS-OS handshake for most of the newer + * ACPI processor features. + */ + +int acpi_processor_set_pdc(struct acpi_processor *pr, + struct acpi_object_list *pdc_in) +{ + acpi_status status = AE_OK; + u32 arg0_buf[3]; + union acpi_object arg0 = {ACPI_TYPE_BUFFER}; + struct acpi_object_list no_object = {1, &arg0}; + struct acpi_object_list *pdc; + + ACPI_FUNCTION_TRACE("acpi_processor_set_pdc"); + + arg0.buffer.length = 12; + arg0.buffer.pointer = (u8 *) arg0_buf; + arg0_buf[0] = ACPI_PDC_REVISION_ID; + arg0_buf[1] = 0; + arg0_buf[2] = 0; + + pdc = (pdc_in) ? pdc_in : &no_object; + + status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL); + + if ((ACPI_FAILURE(status)) && (pdc_in)) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n")); + + return_VALUE(status); +} + + +/* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 79d5ca3066c..8f038cd2947 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -6,6 +6,8 @@ * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> * - Added processor hotplug support + * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * - Added support for C3 on SMP * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -142,7 +144,7 @@ acpi_processor_power_activate ( switch (old->type) { case ACPI_STATE_C3: /* Disable bus master reload */ - if (new->type != ACPI_STATE_C3) + if (new->type != ACPI_STATE_C3 && pr->flags.bm_check) acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, ACPI_MTX_DO_NOT_LOCK); break; } @@ -152,7 +154,7 @@ acpi_processor_power_activate ( switch (new->type) { case ACPI_STATE_C3: /* Enable bus master reload */ - if (old->type != ACPI_STATE_C3) + if (old->type != ACPI_STATE_C3 && pr->flags.bm_check) acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1, ACPI_MTX_DO_NOT_LOCK); break; } @@ -163,6 +165,9 @@ acpi_processor_power_activate ( } +static atomic_t c3_cpu_count; + + static void acpi_processor_idle (void) { struct acpi_processor *pr = NULL; @@ -297,8 +302,22 @@ static void acpi_processor_idle (void) break; case ACPI_STATE_C3: - /* Disable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, ACPI_MTX_DO_NOT_LOCK); + + if (pr->flags.bm_check) { + if (atomic_inc_return(&c3_cpu_count) == + num_online_cpus()) { + /* + * All CPUs are trying to go to C3 + * Disable bus master arbitration + */ + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, + ACPI_MTX_DO_NOT_LOCK); + } + } else { + /* SMP with no shared cache... Invalidate cache */ + ACPI_FLUSH_CPU_CACHE(); + } + /* Get start time (ticks) */ t1 = inl(acpi_fadt.xpm_tmr_blk.address); /* Invoke C3 */ @@ -307,8 +326,12 @@ static void acpi_processor_idle (void) t2 = inl(acpi_fadt.xpm_tmr_blk.address); /* Get end time (ticks) */ t2 = inl(acpi_fadt.xpm_tmr_blk.address); - /* Enable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK); + if (pr->flags.bm_check) { + /* Enable bus master arbitration */ + atomic_dec(&c3_cpu_count); + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK); + } + /* Re-enable interrupts */ local_irq_enable(); /* Compute time (ticks) that we were actually asleep */ @@ -552,9 +575,6 @@ static int acpi_processor_get_power_info_cst (struct acpi_processor *pr) ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_cst"); - if (errata.smp) - return_VALUE(-ENODEV); - if (nocst) return_VALUE(-ENODEV); @@ -687,13 +707,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) return_VOID; } - /* We're (currently) only supporting C2 on UP */ - else if (errata.smp) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "C2 not supported in SMP mode\n")); - return_VOID; - } - /* * Otherwise we've met all of our C2 requirements. * Normalize the C2 latency to expidite policy @@ -709,6 +722,8 @@ static void acpi_processor_power_verify_c3( struct acpi_processor *pr, struct acpi_processor_cx *cx) { + static int bm_check_flag; + ACPI_FUNCTION_TRACE("acpi_processor_get_power_verify_c3"); if (!cx->address) @@ -725,20 +740,6 @@ static void acpi_processor_power_verify_c3( return_VOID; } - /* bus mastering control is necessary */ - else if (!pr->flags.bm_control) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "C3 support requires bus mastering control\n")); - return_VOID; - } - - /* We're (currently) only supporting C2 on UP */ - else if (errata.smp) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "C3 not supported in SMP mode\n")); - return_VOID; - } - /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. @@ -752,6 +753,39 @@ static void acpi_processor_power_verify_c3( return_VOID; } + /* All the logic here assumes flags.bm_check is same across all CPUs */ + if (!bm_check_flag) { + /* Determine whether bm_check is needed based on CPU */ + acpi_processor_power_init_bm_check(&(pr->flags), pr->id); + bm_check_flag = pr->flags.bm_check; + } else { + pr->flags.bm_check = bm_check_flag; + } + + if (pr->flags.bm_check) { + printk("Disabling BM access before entering C3\n"); + /* bus mastering control is necessary */ + if (!pr->flags.bm_control) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 support requires bus mastering control\n")); + return_VOID; + } + } else { + printk("Invalidating cache before entering C3\n"); + /* + * WBINVD should be set in fadt, for C3 state to be + * supported on when bm_check is not required. + */ + if (acpi_fadt.wb_invd != 1) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Cache invalidation should work properly" + " for C3 to be enabled on SMP systems\n")); + return_VOID; + } + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, + 0, ACPI_MTX_DO_NOT_LOCK); + } + /* * Otherwise we've met all of our C3 requirements. * Normalize the C3 latency to expidite policy. Enable @@ -760,7 +794,6 @@ static void acpi_processor_power_verify_c3( */ cx->valid = 1; cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency); - pr->flags.bm_check = 1; return_VOID; } @@ -848,7 +881,7 @@ int acpi_processor_cst_has_changed (struct acpi_processor *pr) if (!pr) return_VALUE(-EINVAL); - if (errata.smp || nocst) { + if ( nocst) { return_VALUE(-ENODEV); } @@ -948,7 +981,6 @@ static struct file_operations acpi_processor_power_fops = { .release = single_release, }; - int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device) { acpi_status status = 0; @@ -965,7 +997,10 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev first_run++; } - if (!errata.smp && (pr->id == 0) && acpi_fadt.cst_cnt && !nocst) { + if (!pr) + return_VALUE(-EINVAL); + + if (acpi_fadt.cst_cnt && !nocst) { status = acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, @@ -973,6 +1008,8 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev } } + acpi_processor_power_init_pdc(&(pr->power), pr->id); + acpi_processor_set_pdc(pr, pr->power.pdc); acpi_processor_get_power_info(pr); /* diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index a9a1a8fe319..1f0d6256302 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -165,37 +165,6 @@ void acpi_processor_ppc_exit(void) { acpi_processor_ppc_status &= ~PPC_REGISTERED; } -/* - * when registering a cpufreq driver with this ACPI processor driver, the - * _PCT and _PSS structures are read out and written into struct - * acpi_processor_performance. - */ -static int acpi_processor_set_pdc (struct acpi_processor *pr) -{ - acpi_status status = AE_OK; - u32 arg0_buf[3]; - union acpi_object arg0 = {ACPI_TYPE_BUFFER}; - struct acpi_object_list no_object = {1, &arg0}; - struct acpi_object_list *pdc; - - ACPI_FUNCTION_TRACE("acpi_processor_set_pdc"); - - arg0.buffer.length = 12; - arg0.buffer.pointer = (u8 *) arg0_buf; - arg0_buf[0] = ACPI_PDC_REVISION_ID; - arg0_buf[1] = 0; - arg0_buf[2] = 0; - - pdc = (pr->performance->pdc) ? pr->performance->pdc : &no_object; - - status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL); - - if ((ACPI_FAILURE(status)) && (pr->performance->pdc)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n")); - - return_VALUE(status); -} - static int acpi_processor_get_performance_control ( @@ -357,7 +326,7 @@ acpi_processor_get_performance_info ( if (!pr || !pr->performance || !pr->handle) return_VALUE(-EINVAL); - acpi_processor_set_pdc(pr); + acpi_processor_set_pdc(pr, pr->performance->pdc); status = acpi_get_handle(pr->handle, "_PCT", &handle); if (ACPI_FAILURE(status)) { |