diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/staging/rt2860/common/action.c | 11 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/ba_action.c | 8 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/cmm_data.c | 4 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/eeprom.c | 18 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/mlme.c | 65 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/rtmp_init.c | 6 | ||||
-rw-r--r-- | drivers/staging/rt2860/oid.h | 8 | ||||
-rw-r--r-- | drivers/staging/rt2860/rt28xx.h | 19 | ||||
-rw-r--r-- | drivers/staging/rt2860/rtmp.h | 20 | ||||
-rw-r--r-- | drivers/staging/rt2860/rtmp_def.h | 6 | ||||
-rw-r--r-- | drivers/staging/rt2860/sta/connect.c | 11 | ||||
-rw-r--r-- | drivers/staging/rt2860/sta/rtmp_data.c | 10 | ||||
-rw-r--r-- | drivers/staging/rt2860/sta_ioctl.c | 10 | ||||
-rw-r--r-- | drivers/staging/rt2860/wpa.h | 2 | ||||
-rw-r--r-- | drivers/staging/rt2870/2870_main_dev.c | 5 | ||||
-rw-r--r-- | drivers/staging/rt2870/common/2870_rtmp_init.c | 5 | ||||
-rw-r--r-- | drivers/staging/rt2870/rt2870.h | 19 |
17 files changed, 34 insertions, 193 deletions
diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c index a4d9fdc0736..256cb67e059 100644 --- a/drivers/staging/rt2860/common/action.c +++ b/drivers/staging/rt2860/common/action.c @@ -528,15 +528,8 @@ VOID SendRefreshBAR( sizeof(FRAME_BAR), &FrameBar, END_OF_ARGS); - if (1) // Now we always send BAR. - { -#ifndef RT30xx - MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen); -#endif -#ifdef RT30xx - MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen); -#endif - } + MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen); + MlmeFreeMemory(pAd, pOutBuffer); } } diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c index b95a341caac..872349a9cc6 100644 --- a/drivers/staging/rt2860/common/ba_action.c +++ b/drivers/staging/rt2860/common/ba_action.c @@ -1391,10 +1391,8 @@ VOID SendPSMPAction( //ULONG Idx; FRAME_PSMP_ACTION Frame; ULONG FrameLen; -#ifdef RT30xx UCHAR bbpdata=0; UINT32 macdata; -#endif // RT30xx // NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory if (NStatus != NDIS_STATUS_SUCCESS) @@ -1410,7 +1408,6 @@ VOID SendPSMPAction( switch (Psmp) { case MMPS_ENABLE: -#ifdef RT30xx if (IS_RT3090(pAd)) { // disable MMPS BBP control register @@ -1423,11 +1420,9 @@ VOID SendPSMPAction( macdata &= ~(0x09); //bit 0, 3 RTMP_IO_WRITE32(pAd, 0x1210, macdata); } -#endif // RT30xx // Frame.Psmp = 0; break; case MMPS_DYNAMIC: -#ifdef RT30xx if (IS_RT3090(pAd)) { // enable MMPS BBP control register @@ -1440,11 +1435,9 @@ VOID SendPSMPAction( macdata |= 0x09; //bit 0, 3 RTMP_IO_WRITE32(pAd, 0x1210, macdata); } -#endif // RT30xx // Frame.Psmp = 3; break; case MMPS_STATIC: -#ifdef RT30xx if (IS_RT3090(pAd)) { // enable MMPS BBP control register @@ -1457,7 +1450,6 @@ VOID SendPSMPAction( macdata |= 0x09; //bit 0, 3 RTMP_IO_WRITE32(pAd, 0x1210, macdata); } -#endif // RT30xx // Frame.Psmp = 1; break; } diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index 2936ca38e44..8d2e7db8b7a 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -2616,7 +2616,9 @@ BOOLEAN MacTableDeleteEntry( AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/); #endif #ifdef RT30xx - RT28XX_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet + // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet + // Set MAC register value according operation mode + RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0); #endif } diff --git a/drivers/staging/rt2860/common/eeprom.c b/drivers/staging/rt2860/common/eeprom.c index d179a9f2565..3a529667067 100644 --- a/drivers/staging/rt2860/common/eeprom.c +++ b/drivers/staging/rt2860/common/eeprom.c @@ -73,16 +73,12 @@ USHORT ShiftInBits( RaiseClock(pAd, &x); RTMP_IO_READ32(pAd, E2PROM_CSR, &x); -#ifdef RT30xx - LowerClock(pAd, &x); //prevent read failed -#endif + + LowerClock(pAd, &x); /* prevent read failed */ + x &= ~(EEDI); if(x & EEDO) data |= 1; - -#ifndef RT30xx - LowerClock(pAd, &x); -#endif } return data; @@ -201,17 +197,13 @@ USHORT RTMP_EEPROM_READ16( x |= EECS; RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); -#ifdef RT30xx // patch can not access e-Fuse issue if (!IS_RT3090(pAd)) { -#endif // kick a pulse RaiseClock(pAd, &x); LowerClock(pAd, &x); -#ifdef RT30xx } -#endif // output the read_opcode and register number in that order ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3); @@ -262,17 +254,13 @@ VOID RTMP_EEPROM_WRITE16( x |= EECS; RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); -#ifdef RT30xx // patch can not access e-Fuse issue if (!IS_RT3090(pAd)) { -#endif // kick a pulse RaiseClock(pAd, &x); LowerClock(pAd, &x); -#ifdef RT30xx } -#endif // output the read_opcode ,register number and data in that order ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3); diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index c9be8898020..d2f0a8be59c 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -449,13 +449,7 @@ FREQUENCY_ITEM FreqItems3020[] = {13, 247, 2, 2}, {14, 248, 2, 4}, }; -#ifndef RT30xx -#define NUM_OF_3020_CHNL (sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM)) -#endif -#ifdef RT30xx -//2008/07/10:KH Modified to share this variable UCHAR NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM)); -#endif /* ========================================================================== @@ -3949,14 +3943,12 @@ VOID BssTableSsidSort( continue; // check group cipher + if ( #ifndef RT30xx - if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && - (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && - (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) -#endif -#ifdef RT30xx - if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) + pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled && + pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled && #endif + pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) continue; // check pairwise cipher, skip if none matched @@ -3975,14 +3967,12 @@ VOID BssTableSsidSort( continue; // check group cipher + if ( #ifndef RT30xx - if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && - (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && - (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) -#endif -#ifdef RT30xx - if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) + pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled && + pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled && #endif + pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) continue; // check pairwise cipher, skip if none matched @@ -8229,7 +8219,6 @@ VOID AsicSetRxAnt( IN PRTMP_ADAPTER pAd, IN UCHAR Ant) { -#ifdef RT30xx UINT32 Value; UINT32 x; @@ -8268,7 +8257,6 @@ VOID AsicSetRxAnt( RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value); DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n")); } -#endif // RT30xx // } #endif /* RT30xx */ @@ -8330,9 +8318,7 @@ VOID AsicEvaluateRxAnt( fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) || OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) -#ifdef RT30xx || (pAd->EepromAccess) -#endif // RT30xx // ) return; @@ -8822,27 +8808,13 @@ VOID AsicStaBbpTuning( { R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20; if (OrigR66Value != R66) - { -#ifndef RT30xx - RTUSBWriteBBPRegister(pAd, BBP_R66, R66); -#endif -#ifdef RT30xx RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); -#endif - } } else { R66 = 0x1C + 2*GET_LNA_GAIN(pAd); if (OrigR66Value != R66) - { -#ifndef RT30xx - RTUSBWriteBBPRegister(pAd, BBP_R66, R66); -#endif -#ifdef RT30xx RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66); -#endif - } } } else @@ -9051,15 +9023,13 @@ VOID AsicTurnOffRFClk( UCHAR index; RTMP_RF_REGS *RFRegTable; -#ifdef RT30xx // The RF programming sequence is difference between 3xxx and 2xxx if (IS_RT3090(pAd)) { RT30xxLoadRFSleepModeSetup(pAd); // add by johnli, RF power sequence setup, load RF sleep-mode setup + return; } - else - { -#endif // RT30xx // + RFRegTable = RF2850RegTable; switch (pAd->RfIcType) @@ -9101,10 +9071,6 @@ VOID AsicTurnOffRFClk( default: break; } -#ifdef RT30xx - } -#endif // RT30xx // - } @@ -9118,14 +9084,10 @@ VOID AsicTurnOnRFClk( UCHAR index; RTMP_RF_REGS *RFRegTable; -#ifdef RT30xx // The RF programming sequence is difference between 3xxx and 2xxx if (IS_RT3090(pAd)) - { - } - else - { -#endif // RT30xx // + return; + RFRegTable = RF2850RegTable; switch (pAd->RfIcType) @@ -9178,8 +9140,5 @@ VOID AsicTurnOnRFClk( pAd->RfIcType, R2)); #endif -#ifdef RT30xx - } -#endif // RT30xx // } diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 004f53023b0..88c0615bf6c 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -1675,7 +1675,6 @@ VOID NICReadEEPROMParameters( Antenna.word = pAd->EEPROMDefaultValue[0]; if (Antenna.word == 0xFFFF) { -#ifdef RT30xx if(IS_RT3090(pAd)) { Antenna.word = 0; @@ -1685,15 +1684,12 @@ VOID NICReadEEPROMParameters( } else { -#endif // RT30xx // Antenna.word = 0; Antenna.field.RfIcType = RFIC_2820; Antenna.field.TxPath = 1; Antenna.field.RxPath = 2; DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); -#ifdef RT30xx } -#endif // RT30xx // } // Choose the desired Tx&Rx stream. @@ -2445,7 +2441,6 @@ NDIS_STATUS NICInitializeAsic( } } -#ifdef RT30xx // Initialize RT3070 serial MAc registers which is different from RT2870 serial if (IS_RT3090(pAd)) { @@ -2468,6 +2463,7 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); } } +#ifdef RT30xx else if (IS_RT3070(pAd)) { RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h index 8a3b2abbe25..61fbe937039 100644 --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -535,10 +535,8 @@ typedef enum _NDIS_802_11_WEP_STATUS Ndis802_11Encryption3KeyAbsent, Ndis802_11Encryption4Enabled, // TKIP or AES mix Ndis802_11Encryption4KeyAbsent, -#ifndef RT30xx Ndis802_11GroupWEP40Enabled, Ndis802_11GroupWEP104Enabled, -#endif } NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS, NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS; @@ -626,17 +624,13 @@ typedef struct _NDIS_802_11_CAPABILITY NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1]; } NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY; -#ifdef RT30xx #define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon -#endif #define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02) #ifdef DBG #define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03) #define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05) -#ifdef RT30xx #define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13) -#endif #define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07) #endif @@ -660,7 +654,7 @@ enum { RAIO_OFF = 10, RAIO_ON = 11, SHOW_CFG_VALUE = 20, -#if !defined(RT2860) && !defined(RT30xx) +#if !defined(RT2860) SHOW_ADHOC_ENTRY_INFO = 21, #endif }; diff --git a/drivers/staging/rt2860/rt28xx.h b/drivers/staging/rt2860/rt28xx.h index 0f832ab5c92..c08525002cc 100644 --- a/drivers/staging/rt2860/rt28xx.h +++ b/drivers/staging/rt2860/rt28xx.h @@ -49,14 +49,8 @@ typedef int NTSTATUS; -#ifdef RT30xx #define OPT_14 0x114 -#define RETRY_LIMIT 10 -#define STATUS_SUCCESS 0x00 -#define STATUS_UNSUCCESSFUL 0x01 -#endif - // // SCH/DMA registers - base address 0x0200 // @@ -292,7 +286,6 @@ typedef union _USB_DMA_CFG_STRUC { #define PBF_DBG 0x043c #define PBF_CAP_CTRL 0x0440 -#ifdef RT30xx // eFuse registers #define EFUSE_CTRL 0x0580 #define EFUSE_DATA0 0x0590 @@ -320,7 +313,6 @@ typedef union _EFUSE_CTRL_STRUC { #define LDO_CFG0 0x05d4 #define GPIO_SWITCH 0x05dc -#endif /* RT30xx */ // // 4 MAC registers @@ -1137,9 +1129,7 @@ typedef struct _HW_WCID_ENTRY { // 8-byte per entry #define BBP_R22 22 #define BBP_R24 24 #define BBP_R25 25 -#ifdef RT30xx #define BBP_R31 31 -#endif #define BBP_R49 49 //TSSI #define BBP_R50 50 #define BBP_R51 51 @@ -1157,10 +1147,8 @@ typedef struct _HW_WCID_ENTRY { // 8-byte per entry #define BBP_R73 73 #define BBP_R75 75 #define BBP_R77 77 -#ifdef RT30xx #define BBP_R79 79 #define BBP_R80 80 -#endif #define BBP_R81 81 #define BBP_R82 82 #define BBP_R83 83 @@ -1182,9 +1170,7 @@ typedef struct _HW_WCID_ENTRY { // 8-byte per entry #define BBP_R121 121 #define BBP_R122 122 #define BBP_R123 123 -#ifdef RT30xx #define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control -#endif // RT30xx // #define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db @@ -1608,15 +1594,10 @@ typedef union _EEPROM_NIC_CINFIG2_STRUC { USHORT EnableWPSPBC:1; // WPS PBC Control bit USHORT BW40MAvailForG:1; // 0:enable, 1:disable USHORT BW40MAvailForA:1; // 0:enable, 1:disable -#ifndef RT30xx - USHORT Rsv2:6; // must be 0 -#endif -#ifdef RT30xx USHORT Rsv1:1; // must be 0 USHORT AntDiversity:1; // Antenna diversity USHORT Rsv2:3; // must be 0 USHORT DACTestBit:1; // control if driver should patch the DAC issue -#endif } field; USHORT word; } EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC; diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 99f9ebc8d55..4c17cc5248c 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -403,6 +403,8 @@ typedef struct _QUEUE_HEADER { #ifdef RT30xx // We will have a cost down version which mac version is 0x3090xxxx #define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000)) +#else +#define IS_RT3090(_pAd) 0 #endif #define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000) #ifdef RT30xx @@ -928,7 +930,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { } #endif // RT2870 // -#ifdef RT30xx //Need to collect each ant's rssi concurrently //rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant #define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2) \ @@ -960,8 +961,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { _pAd->RxAnt.RcvPktNumWhenEvaluate++; \ } \ } -#endif // RT30xx // - #define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \ NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen) @@ -4885,11 +4884,9 @@ CHAR RTMPMaxRssi( IN CHAR Rssi1, IN CHAR Rssi2); -#ifdef RT30xx VOID AsicSetRxAnt( IN PRTMP_ADAPTER pAd, IN UCHAR Ant); -#endif VOID AsicEvaluateRxAnt( IN PRTMP_ADAPTER pAd); @@ -5564,11 +5561,6 @@ VOID RTMPSendTriggerFrame( IN UCHAR TxRate, IN BOOLEAN bQosNull); -#ifdef RT30xx -VOID RTMPFilterCalibration( - IN PRTMP_ADAPTER pAd); -#endif // RT30xx // - /* timeout -- ms */ VOID RTMP_SetPeriodicTimer( IN NDIS_MINIPORT_TIMER *pTimer, @@ -6538,8 +6530,6 @@ NTSTATUS RT30xxReadRFRegister( IN UCHAR RegID, IN PUCHAR pValue); -#ifdef RT30xx -//2008/09/11:KH add to support efuse<-- UCHAR eFuseReadRegisters( IN PRTMP_ADAPTER pAd, IN USHORT Offset, @@ -6615,11 +6605,7 @@ NDIS_STATUS NICLoadEEPROM( BOOLEAN bNeedLoadEEPROM( IN PRTMP_ADAPTER pAd); -//2008/09/11:KH add to support efuse--> -#endif // RT30xx // -#ifdef RT30xx -// add by johnli, RF power sequence setup VOID RT30xxLoadRFNormalModeSetup( IN PRTMP_ADAPTER pAd); @@ -6628,8 +6614,6 @@ VOID RT30xxLoadRFSleepModeSetup( VOID RT30xxReverseRFSleepModeSetup( IN PRTMP_ADAPTER pAd); -// end johnli -#endif // RT30xx // #ifdef RT2870 // diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index 8a7dd10feb5..def240bd319 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -148,11 +148,7 @@ #define MAX_PACKETS_IN_PS_QUEUE 128 //32 #define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */ -#ifdef RT30xx -//2008/09/11:KH add to support efuse<-- #define MAX_EEPROM_BIN_FILE_SIZE 1024 -//2008/09/11:KH add to support efuse--> -#endif // RxFilter #define STANORMAL 0x17f97 @@ -1210,10 +1206,8 @@ #define RFIC_2750 4 // 2.4G/5G 1T2R #define RFIC_3020 5 // 2.4G 1T1R #define RFIC_2020 6 // 2.4G B/G -#ifdef RT30xx #define RFIC_3021 7 // 2.4G 1T2R #define RFIC_3022 8 // 2.4G 2T2R -#endif // LED Status. #define LED_LINK_DOWN 0 diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index ac713518666..a0c64071539 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -1711,15 +1711,12 @@ VOID LinkUp( // Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable // // if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is. + if ( #ifdef RT30xx - if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) && + !(pAd->CommonCfg.RxStream == 1 && pAd->CommonCfg.TxStream == 1) && +#endif (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)) || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))) -#endif -#ifndef RT30xx - if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))) - || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))) -#endif { RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data); Data &= 0xFFFFFF00; @@ -2101,7 +2098,6 @@ VOID LinkDown( wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL); } -#ifdef RT30xx if (IS_RT3090(pAd)) { UINT32 macdata; @@ -2115,7 +2111,6 @@ VOID LinkDown( macdata &= ~(0x09); //bit 0, 3 RTMP_IO_WRITE32(pAd, 0x1210, macdata); } -#endif // RT30xx // } /* diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index b41ce230c50..91a98afcee1 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -575,14 +575,12 @@ VOID STAHandleRxMgmtFrame( { // We should collect RSSI not only U2M data but also my beacon + if ( #ifdef RT30xx - if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)) - && (pAd->RxAnt.EvaluatePeriod == 0)) + pAd->RxAnt.EvaluatePeriod == 0 && #endif -#ifndef RT30xx - if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))) -#endif - { + pHeader->FC.SubType == SUBTYPE_BEACON && + MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)) { Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI); pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0); diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index fa09441dcfa..bfbfba9d39f 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -1676,15 +1676,11 @@ int rt_ioctl_siwencode(struct net_device *dev, pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus; pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen; goto done; - } + } else if ( #ifndef RT30xx - else if ((erq->length == 0) && - (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)) -#endif -#ifdef RT30xx - else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN) + erq->length == 0 && #endif - { + (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)) { STA_PORT_SECURED(pAdapter); pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled; pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled; diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h index e6716748adf..355309a6863 100644 --- a/drivers/staging/rt2860/wpa.h +++ b/drivers/staging/rt2860/wpa.h @@ -90,9 +90,7 @@ #define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK) #define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK)) #define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY)) -#ifndef RT30xx #define MIN_LEN_OF_GTK 5 -#endif // RSN IE Length definition #define MAX_LEN_OF_RSNIE 90 diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c index 26ba0132158..35c19708861 100644 --- a/drivers/staging/rt2870/2870_main_dev.c +++ b/drivers/staging/rt2870/2870_main_dev.c @@ -1101,12 +1101,7 @@ BOOLEAN RT28XXChipsetCheck( if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor && dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct) { -#ifndef RT30xx printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n", -#endif -#ifdef RT30xx - printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n", -#endif dev_p->descriptor.idVendor, dev_p->descriptor.idProduct); break; } diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c index 259dca99b92..a20550e4cf1 100644 --- a/drivers/staging/rt2870/common/2870_rtmp_init.c +++ b/drivers/staging/rt2870/common/2870_rtmp_init.c @@ -737,12 +737,7 @@ NDIS_STATUS CreateThreads( { PRTMP_ADAPTER pAd = net_dev->ml_priv; POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; -#ifndef RT30xx - pid_t pid_number = -1; -#endif -#ifdef RT30xx pid_t pid_number; -#endif //init_MUTEX(&(pAd->usbdev_semaphore)); diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index a555f166f51..04508c222e9 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -46,9 +46,7 @@ #define MAX_TXBULK_SIZE (LOCAL_TXBUF_SIZE*BULKAGGRE_ZISE) #define MAX_RXBULK_SIZE (LOCAL_TXBUF_SIZE*RXBULKAGGRE_ZISE) #define MAX_MLME_HANDLER_MEMORY 20 -#ifndef RT30xx #define RETRY_LIMIT 10 -#endif #define BUFFER_SIZE 2400 //2048 #define TX_RING 0xa #define PRIO_RING 0xc @@ -64,9 +62,7 @@ #define fRTUSB_BULK_OUT_DATA_NORMAL_2 0x00020000 #define fRTUSB_BULK_OUT_DATA_NORMAL_3 0x00040000 #define fRTUSB_BULK_OUT_DATA_NORMAL_4 0x00080000 -#ifdef RT30xx #define fRTUSB_BULK_OUT_DATA_NORMAL_5 0x00100000 -#endif #define fRTUSB_BULK_OUT_PSPOLL 0x00000020 #define fRTUSB_BULK_OUT_DATA_FRAG 0x00000040 @@ -284,14 +280,6 @@ extern UCHAR EpToQueue[6]; RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, \ pEntry, sizeof(MAC_TABLE_ENTRY)); -#ifdef RT30xx -// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet -// Set MAC register value according operation mode -#define RT28XX_UPDATE_PROTECT(pAd) \ - RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0); -// end johnli -#endif - // remove Pair-wise key material from ASIC // yet implement #define RT28XX_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid) @@ -383,10 +371,8 @@ extern UCHAR EpToQueue[6]; #define RT28xx_CHIP_NAME "RT2870" #endif #define USB_CYC_CFG 0x02a4 -#ifndef RT30xx #define STATUS_SUCCESS 0x00 #define STATUS_UNSUCCESSFUL 0x01 -#endif #define NT_SUCCESS(status) (((status) > 0) ? (1):(0)) #define InterlockedIncrement atomic_inc #define NdisInterlockedIncrement atomic_inc @@ -595,12 +581,7 @@ typedef struct _CMDHandler_TLV { #define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 // cmd #define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 // cmd #define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 // cmd - -#ifdef RT30xx -// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet #define CMDTHREAD_UPDATE_PROTECT 0x0D790103 // cmd -// end johnli -#endif #define WPA1AKMBIT 0x01 #define WPA2AKMBIT 0x02 |