aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/Kconfig1
-rw-r--r--drivers/i2c/busses/Kconfig16
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c2
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c3
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c6
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c3
-rw-r--r--drivers/i2c/busses/i2c-powermac.c139
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c2
-rw-r--r--drivers/i2c/busses/i2c-sis630.c2
-rw-r--r--drivers/i2c/busses/i2c-stub.c34
-rw-r--r--drivers/i2c/busses/i2c-voodoo3.c248
-rw-r--r--drivers/i2c/chips/Kconfig10
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/i2c-core.c169
-rw-r--r--drivers/i2c/i2c-dev.c22
-rw-r--r--drivers/misc/Kconfig10
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/ds1682.c (renamed from drivers/i2c/chips/ds1682.c)0
-rw-r--r--drivers/misc/ics932s401.c37
21 files changed, 183 insertions, 528 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d7ece131b4f..8d8a00e5a30 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -5,6 +5,7 @@
menuconfig I2C
tristate "I2C support"
depends on HAS_IOMEM
+ select RT_MUTEXES
---help---
I2C (pronounce: I-square-C) is a slow serial bus protocol used in
many micro controller applications and developed by Philips. SMBus,
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e8fe7f169e2..5f318ce2977 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -640,22 +640,6 @@ config I2C_TINY_USB
This driver can also be built as a module. If so, the module
will be called i2c-tiny-usb.
-comment "Graphics adapter I2C/DDC channel drivers"
- depends on PCI
-
-config I2C_VOODOO3
- tristate "Voodoo 3 (DEPRECATED)"
- depends on PCI
- select I2C_ALGOBIT
- help
- If you say yes to this option, support will be included for the
- Voodoo 3 I2C interface. This driver is deprecated and you should
- use the tdfxfb driver instead, which additionally provides
- framebuffer support.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
comment "Other I2C/SMBus bus drivers"
config I2C_ACORN
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ff937ac69f5..302c551977b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -61,9 +61,6 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
-# Graphics adapter I2C/DDC channel drivers
-obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
-
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index d108450df06..8de7d7b87bb 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -138,7 +138,7 @@ static unsigned short ali1535_smba;
Note the differences between kernels with the old PCI BIOS interface and
newer kernels with the real PCI interface. In compat.h some things are
defined to make the transition easier. */
-static int ali1535_setup(struct pci_dev *dev)
+static int __devinit ali1535_setup(struct pci_dev *dev)
{
int retval = -ENODEV;
unsigned char temp;
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index d627fceb790..e7e3205f128 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -131,7 +131,7 @@ MODULE_PARM_DESC(force_addr,
static struct pci_driver ali15x3_driver;
static unsigned short ali15x3_smba;
-static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
+static int __devinit ali15x3_setup(struct pci_dev *ALI15X3_dev)
{
u16 a;
unsigned char temp;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 55edcfe5b85..df6ab553f97 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -767,6 +767,9 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
/* set up the sysfs linkage to our parent device */
i801_adapter.dev.parent = &dev->dev;
+ /* Retry up to 3 times on lost arbitration */
+ i801_adapter.retries = 3;
+
snprintf(i801_adapter.name, sizeof(i801_adapter.name),
"SMBus I801 adapter at %04lx", i801_smba);
err = i2c_add_adapter(&i801_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index a75c75e77b9..5901707fc66 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -56,12 +56,6 @@ iic_cook_addr(struct i2c_msg *msg)
if (msg->flags & I2C_M_RD)
addr |= 1;
- /*
- * Read or Write?
- */
- if (msg->flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
-
return addr;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index bbab0e16663..ed387ffa473 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -338,9 +338,6 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
if (msg->flags & I2C_M_RD)
dir = 1;
- if (msg->flags & I2C_M_REV_DIR_ADDR)
- dir ^= 1;
-
if (msg->flags & I2C_M_TEN) {
drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
drv_data->addr2 = (u32)msg->addr & 0xff;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 3c9d71f6018..1c440a70ec6 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -49,48 +49,38 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
int rc = 0;
int read = (read_write == I2C_SMBUS_READ);
int addrdir = (addr << 1) | read;
+ int mode, subsize, len;
+ u32 subaddr;
+ u8 *buf;
u8 local[2];
- rc = pmac_i2c_open(bus, 0);
- if (rc)
- return rc;
+ if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
+ mode = pmac_i2c_mode_std;
+ subsize = 0;
+ subaddr = 0;
+ } else {
+ mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
+ subsize = 1;
+ subaddr = command;
+ }
switch (size) {
case I2C_SMBUS_QUICK:
- rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
- if (rc)
- goto bail;
- rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+ buf = NULL;
+ len = 0;
break;
case I2C_SMBUS_BYTE:
- rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
- if (rc)
- goto bail;
- rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
- break;
case I2C_SMBUS_BYTE_DATA:
- rc = pmac_i2c_setmode(bus, read ?
- pmac_i2c_mode_combined :
- pmac_i2c_mode_stdsub);
- if (rc)
- goto bail;
- rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+ buf = &data->byte;
+ len = 1;
break;
case I2C_SMBUS_WORD_DATA:
- rc = pmac_i2c_setmode(bus, read ?
- pmac_i2c_mode_combined :
- pmac_i2c_mode_stdsub);
- if (rc)
- goto bail;
if (!read) {
local[0] = data->word & 0xff;
local[1] = (data->word >> 8) & 0xff;
}
- rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
- if (rc == 0 && read) {
- data->word = ((u16)local[1]) << 8;
- data->word |= local[0];
- }
+ buf = local;
+ len = 2;
break;
/* Note that these are broken vs. the expected smbus API where
@@ -105,28 +95,44 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
* a repeat start/addr phase (but not stop in between)
*/
case I2C_SMBUS_BLOCK_DATA:
- rc = pmac_i2c_setmode(bus, read ?
- pmac_i2c_mode_combined :
- pmac_i2c_mode_stdsub);
- if (rc)
- goto bail;
- rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
- data->block[0] + 1);
-
+ buf = data->block;
+ len = data->block[0] + 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- rc = pmac_i2c_setmode(bus, read ?
- pmac_i2c_mode_combined :
- pmac_i2c_mode_stdsub);
- if (rc)
- goto bail;
- rc = pmac_i2c_xfer(bus, addrdir, 1, command,
- &data->block[1], data->block[0]);
+ buf = &data->block[1];
+ len = data->block[0];
break;
default:
- rc = -EINVAL;
+ return -EINVAL;
+ }
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc) {
+ dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
+ return rc;
+ }
+
+ rc = pmac_i2c_setmode(bus, mode);
+ if (rc) {
+ dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+ mode, rc);
+ goto bail;
}
+
+ rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
+ if (rc) {
+ dev_err(&adap->dev,
+ "I2C transfer at 0x%02x failed, size %d, err %d\n",
+ addrdir >> 1, size, rc);
+ goto bail;
+ }
+
+ if (size == I2C_SMBUS_WORD_DATA && read) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+
bail:
pmac_i2c_close(bus);
return rc;
@@ -146,20 +152,33 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
int read;
int addrdir;
+ if (num != 1) {
+ dev_err(&adap->dev,
+ "Multi-message I2C transactions not supported\n");
+ return -EOPNOTSUPP;
+ }
+
if (msgs->flags & I2C_M_TEN)
return -EINVAL;
read = (msgs->flags & I2C_M_RD) != 0;
addrdir = (msgs->addr << 1) | read;
- if (msgs->flags & I2C_M_REV_DIR_ADDR)
- addrdir ^= 1;
rc = pmac_i2c_open(bus, 0);
- if (rc)
+ if (rc) {
+ dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
return rc;
+ }
rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
- if (rc)
+ if (rc) {
+ dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+ pmac_i2c_mode_std, rc);
goto bail;
+ }
rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ if (rc < 0)
+ dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+ addrdir & 1 ? "read from" : "write to", addrdir >> 1,
+ rc);
bail:
pmac_i2c_close(bus);
return rc < 0 ? rc : 1;
@@ -183,19 +202,16 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
static int __devexit i2c_powermac_remove(struct platform_device *dev)
{
struct i2c_adapter *adapter = platform_get_drvdata(dev);
- struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
int rc;
rc = i2c_del_adapter(adapter);
- pmac_i2c_detach_adapter(bus, adapter);
- i2c_set_adapdata(adapter, NULL);
/* We aren't that prepared to deal with this... */
if (rc)
printk(KERN_WARNING
"i2c-powermac.c: Failed to remove bus %s !\n",
adapter->name);
platform_set_drvdata(dev, NULL);
- kfree(adapter);
+ memset(adapter, 0, sizeof(*adapter));
return 0;
}
@@ -206,12 +222,12 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
struct pmac_i2c_bus *bus = dev->dev.platform_data;
struct device_node *parent = NULL;
struct i2c_adapter *adapter;
- char name[32];
const char *basename;
int rc;
if (bus == NULL)
return -EINVAL;
+ adapter = pmac_i2c_get_adapter(bus);
/* Ok, now we need to make up a name for the interface that will
* match what we used to do in the past, that is basically the
@@ -237,29 +253,22 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
default:
return -EINVAL;
}
- snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+ snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
+ pmac_i2c_get_channel(bus));
of_node_put(parent);
- adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
- if (adapter == NULL) {
- printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
- return -ENOMEM;
- }
platform_set_drvdata(dev, adapter);
- strcpy(adapter->name, name);
adapter->algo = &i2c_powermac_algorithm;
i2c_set_adapdata(adapter, bus);
adapter->dev.parent = &dev->dev;
- pmac_i2c_attach_adapter(bus, adapter);
rc = i2c_add_adapter(adapter);
if (rc) {
printk(KERN_ERR "i2c-powermac: Adapter %s registration "
- "failed\n", name);
- i2c_set_adapdata(adapter, NULL);
- pmac_i2c_detach_adapter(bus, adapter);
+ "failed\n", adapter->name);
+ memset(adapter, 0, sizeof(*adapter));
}
- printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+ printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
if (!strncmp(basename, "uni-n", 5)) {
struct device_node *np;
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 139f0c7f12a..844569f7d8b 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -142,7 +142,7 @@ static void sis5595_write(u8 reg, u8 data)
outb(data, sis5595_base + SMB_DAT);
}
-static int sis5595_setup(struct pci_dev *SIS5595_dev)
+static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
{
u16 a;
u8 val;
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 70ca41e90e5..68cff7af701 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -389,7 +389,7 @@ static u32 sis630_func(struct i2c_adapter *adapter)
I2C_FUNC_SMBUS_BLOCK_DATA;
}
-static int sis630_setup(struct pci_dev *sis630_dev)
+static int __devinit sis630_setup(struct pci_dev *sis630_dev)
{
unsigned char b;
struct pci_dev *dummy = NULL;
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 1b7b2af9403..0c770eabe85 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -35,6 +35,10 @@ module_param_array(chip_addr, ushort, NULL, S_IRUGO);
MODULE_PARM_DESC(chip_addr,
"Chip addresses (up to 10, between 0x03 and 0x77)");
+static unsigned long functionality = ~0UL;
+module_param(functionality, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(functionality, "Override functionality bitfield");
+
struct stub_chip {
u8 pointer;
u16 words[256]; /* Byte operations use the LSB as per SMBus
@@ -48,7 +52,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data * data)
{
s32 ret;
- int i;
+ int i, len;
struct stub_chip *chip = NULL;
/* Search for the right chip */
@@ -118,6 +122,29 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
ret = 0;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ len = data->block[0];
+ if (read_write == I2C_SMBUS_WRITE) {
+ for (i = 0; i < len; i++) {
+ chip->words[command + i] &= 0xff00;
+ chip->words[command + i] |= data->block[1 + i];
+ }
+ dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
+ "wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
+ } else {
+ for (i = 0; i < len; i++) {
+ data->block[1 + i] =
+ chip->words[command + i] & 0xff;
+ }
+ dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
+ "read %d bytes at 0x%02x.\n",
+ addr, len, command);
+ }
+
+ ret = 0;
+ break;
+
default:
dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
ret = -EOPNOTSUPP;
@@ -129,8 +156,9 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
static u32 stub_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+ return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK) & functionality;
}
static const struct i2c_algorithm smbus_algorithm = {
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
deleted file mode 100644
index 7663d57833a..00000000000
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
- Simon Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Voodoo3 to gain access to
- the BT869 and possibly other I2C devices. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* the only registers we use */
-#define REG 0x78
-#define REG2 0x70
-
-/* bit locations in the register */
-#define DDC_ENAB 0x00040000
-#define DDC_SCL_OUT 0x00080000
-#define DDC_SDA_OUT 0x00100000
-#define DDC_SCL_IN 0x00200000
-#define DDC_SDA_IN 0x00400000
-#define I2C_ENAB 0x00800000
-#define I2C_SCL_OUT 0x01000000
-#define I2C_SDA_OUT 0x02000000
-#define I2C_SCL_IN 0x04000000
-#define I2C_SDA_IN 0x08000000
-
-/* initialization states */
-#define INIT2 0x2
-#define INIT3 0x4
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The voo GPIO registers don't have individual masks for each bit
- so we always have to read before writing. */
-
-static void bit_vooi2c_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= I2C_SCL_OUT;
- else
- r &= ~I2C_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_vooi2c_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= I2C_SDA_OUT;
- else
- r &= ~I2C_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
- We rely on the i2c-algo-bit routines to set the pins high before
- reading the input from other chips. */
-
-static int bit_vooi2c_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_vooi2c_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-static void bit_vooddc_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= DDC_SCL_OUT;
- else
- r &= ~DDC_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_vooddc_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= DDC_SDA_OUT;
- else
- r &= ~DDC_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static int bit_vooddc_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
-}
-
-static int bit_vooddc_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
-}
-
-static int config_v3(struct pci_dev *dev)
-{
- unsigned long cadr;
-
- /* map Voodoo3 memory */
- cadr = dev->resource[0].start;
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
- ioaddr = ioremap_nocache(cadr, 0x1000);
- if (ioaddr) {
- writel(0x8160, ioaddr + REG2);
- writel(0xcffc0020, ioaddr + REG);
- dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct i2c_algo_bit_data voo_i2c_bit_data = {
- .setsda = bit_vooi2c_setsda,
- .setscl = bit_vooi2c_setscl,
- .getsda = bit_vooi2c_getsda,
- .getscl = bit_vooi2c_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_i2c_adapter = {
- .owner = THIS_MODULE,
- .name = "I2C Voodoo3/Banshee adapter",
- .algo_data = &voo_i2c_bit_data,
-};
-
-static struct i2c_algo_bit_data voo_ddc_bit_data = {
- .setsda = bit_vooddc_setsda,
- .setscl = bit_vooddc_setscl,
- .getsda = bit_vooddc_getsda,
- .getscl = bit_vooddc_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_ddc_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_DDC,
- .name = "DDC Voodoo3/Banshee adapter",
- .algo_data = &voo_ddc_bit_data,
-};
-
-static struct pci_device_id voodoo3_ids[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, voodoo3_ids);
-
-static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = config_v3(dev);
- if (retval)
- return retval;
-
- /* set up the sysfs linkage to our parent device */
- voodoo3_i2c_adapter.dev.parent = &dev->dev;
- voodoo3_ddc_adapter.dev.parent = &dev->dev;
-
- retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
- if (retval)
- return retval;
- retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
- if (retval)
- i2c_del_adapter(&voodoo3_i2c_adapter);
- return retval;
-}
-
-static void __devexit voodoo3_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&voodoo3_i2c_adapter);
- i2c_del_adapter(&voodoo3_ddc_adapter);
- iounmap(ioaddr);
-}
-
-static struct pci_driver voodoo3_driver = {
- .name = "voodoo3_smbus",
- .id_table = voodoo3_ids,
- .probe = voodoo3_probe,
- .remove = __devexit_p(voodoo3_remove),
-};
-
-static int __init i2c_voodoo3_init(void)
-{
- return pci_register_driver(&voodoo3_driver);
-}
-
-static void __exit i2c_voodoo3_exit(void)
-{
- pci_unregister_driver(&voodoo3_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Ralph Metzler <rjkm@thp.uni-koeln.de>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_voodoo3_init);
-module_exit(i2c_voodoo3_exit);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index f9618f4d4e4..ae4539d99be 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -6,16 +6,6 @@
menu "Miscellaneous I2C Chip support"
-config DS1682
- tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
- depends on EXPERIMENTAL
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1682 Total Elapsed Time Recorder.
-
- This driver can also be built as a module. If so, the module
- will be called ds1682.
-
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 749cf360629..fe0af0f81f2 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -10,7 +10,6 @@
# * I/O expander drivers go to drivers/gpio
#
-obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 29650435514..4f34823e86b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -558,11 +558,9 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
up_read(&__i2c_board_lock);
}
-static int i2c_do_add_adapter(struct device_driver *d, void *data)
+static int i2c_do_add_adapter(struct i2c_driver *driver,
+ struct i2c_adapter *adap)
{
- struct i2c_driver *driver = to_i2c_driver(d);
- struct i2c_adapter *adap = data;
-
/* Detect supported devices on that bus, and instantiate them */
i2c_detect(adap, driver);
@@ -574,6 +572,11 @@ static int i2c_do_add_adapter(struct device_driver *d, void *data)
return 0;
}
+static int __process_new_adapter(struct device_driver *d, void *data)
+{
+ return i2c_do_add_adapter(to_i2c_driver(d), data);
+}
+
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = 0, dummy;
@@ -584,7 +587,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
goto out_list;
}
- mutex_init(&adap->bus_lock);
+ rt_mutex_init(&adap->bus_lock);
/* Set default timeout to 1 second if not already set */
if (adap->timeout == 0)
@@ -614,7 +617,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
/* Notify drivers */
mutex_lock(&core_lock);
dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
- i2c_do_add_adapter);
+ __process_new_adapter);
mutex_unlock(&core_lock);
return 0;
@@ -715,10 +718,9 @@ retry:
}
EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
-static int i2c_do_del_adapter(struct device_driver *d, void *data)
+static int i2c_do_del_adapter(struct i2c_driver *driver,
+ struct i2c_adapter *adapter)
{
- struct i2c_driver *driver = to_i2c_driver(d);
- struct i2c_adapter *adapter = data;
struct i2c_client *client, *_n;
int res;
@@ -750,6 +752,11 @@ static int __unregister_client(struct device *dev, void *dummy)
return 0;
}
+static int __process_removed_adapter(struct device_driver *d, void *data)
+{
+ return i2c_do_del_adapter(to_i2c_driver(d), data);
+}
+
/**
* i2c_del_adapter - unregister I2C adapter
* @adap: the adapter being unregistered
@@ -777,7 +784,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
/* Tell drivers about this removal */
mutex_lock(&core_lock);
res = bus_for_each_drv(&i2c_bus_type, NULL, adap,
- i2c_do_del_adapter);
+ __process_removed_adapter);
mutex_unlock(&core_lock);
if (res)
return res;
@@ -826,22 +833,11 @@ EXPORT_SYMBOL(i2c_del_adapter);
/* ------------------------------------------------------------------------- */
-static int __attach_adapter(struct device *dev, void *data)
+static int __process_new_driver(struct device *dev, void *data)
{
- struct i2c_adapter *adapter;
- struct i2c_driver *driver = data;
-
if (dev->type != &i2c_adapter_type)
return 0;
- adapter = to_i2c_adapter(dev);
-
- i2c_detect(adapter, driver);
-
- /* Legacy drivers scan i2c busses directly */
- if (driver->attach_adapter)
- driver->attach_adapter(adapter);
-
- return 0;
+ return i2c_do_add_adapter(data, to_i2c_adapter(dev));
}
/*
@@ -873,40 +869,18 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
mutex_lock(&core_lock);
- bus_for_each_dev(&i2c_bus_type, NULL, driver, __attach_adapter);
+ bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_new_driver);
mutex_unlock(&core_lock);
return 0;
}
EXPORT_SYMBOL(i2c_register_driver);
-static int __detach_adapter(struct device *dev, void *data)
+static int __process_removed_driver(struct device *dev, void *data)
{
- struct i2c_adapter *adapter;
- struct i2c_driver *driver = data;
- struct i2c_client *client, *_n;
-
if (dev->type != &i2c_adapter_type)
return 0;
- adapter = to_i2c_adapter(dev);
-
- /* Remove the devices we created ourselves as the result of hardware
- * probing (using a driver's detect method) */
- list_for_each_entry_safe(client, _n, &driver->clients, detected) {
- dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
- client->name, client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
-
- if (driver->detach_adapter) {
- if (driver->detach_adapter(adapter))
- dev_err(&adapter->dev,
- "detach_adapter failed for driver [%s]\n",
- driver->driver.name);
- }
-
- return 0;
+ return i2c_do_del_adapter(data, to_i2c_adapter(dev));
}
/**
@@ -917,7 +891,7 @@ static int __detach_adapter(struct device *dev, void *data)
void i2c_del_driver(struct i2c_driver *driver)
{
mutex_lock(&core_lock);
- bus_for_each_dev(&i2c_bus_type, NULL, driver, __detach_adapter);
+ bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_removed_driver);
mutex_unlock(&core_lock);
driver_unregister(&driver->driver);
@@ -1092,12 +1066,12 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
#endif
if (in_atomic() || irqs_disabled()) {
- ret = mutex_trylock(&adap->bus_lock);
+ ret = rt_mutex_trylock(&adap->bus_lock);
if (!ret)
/* I2C activity is ongoing. */
return -EAGAIN;
} else {
- mutex_lock_nested(&adap->bus_lock, adap->level);
+ rt_mutex_lock(&adap->bus_lock);
}
/* Retry automatically on arbitration loss */
@@ -1109,7 +1083,7 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if (time_after(jiffies, orig_jiffies + adap->timeout))
break;
}
- mutex_unlock(&adap->bus_lock);
+ rt_mutex_unlock(&adap->bus_lock);
return ret;
} else {
@@ -1180,7 +1154,7 @@ EXPORT_SYMBOL(i2c_master_recv);
* ----------------------------------------------------
*/
-static int i2c_detect_address(struct i2c_client *temp_client, int kind,
+static int i2c_detect_address(struct i2c_client *temp_client,
struct i2c_driver *driver)
{
struct i2c_board_info info;
@@ -1199,22 +1173,18 @@ static int i2c_detect_address(struct i2c_client *temp_client, int kind,
if (i2c_check_addr(adapter, addr))
return 0;
- /* Make sure there is something at this address, unless forced */
- if (kind < 0) {
- if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
- I2C_SMBUS_QUICK, NULL) < 0)
- return 0;
+ /* Make sure there is something at this address */
+ if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
- /* prevent 24RF08 corruption */
- if ((addr & ~0x0f) == 0x50)
- i2c_smbus_xfer(adapter, addr, 0, 0, 0,
- I2C_SMBUS_QUICK, NULL);
- }
+ /* Prevent 24RF08 corruption */
+ if ((addr & ~0x0f) == 0x50)
+ i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
/* Finally call the custom detection function */
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = addr;
- err = driver->detect(temp_client, kind, &info);
+ err = driver->detect(temp_client, -1, &info);
if (err) {
/* -ENODEV is returned if the detection fails. We catch it
here as this isn't an error. */
@@ -1259,40 +1229,13 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
return -ENOMEM;
temp_client->adapter = adapter;
- /* Force entries are done first, and are not affected by ignore
- entries */
- if (address_data->forces) {
- const unsigned short * const *forces = address_data->forces;
- int kind;
-
- for (kind = 0; forces[kind]; kind++) {
- for (i = 0; forces[kind][i] != I2C_CLIENT_END;
- i += 2) {
- if (forces[kind][i] == adap_id
- || forces[kind][i] == ANY_I2C_BUS) {
- dev_dbg(&adapter->dev, "found force "
- "parameter for adapter %d, "
- "addr 0x%02x, kind %d\n",
- adap_id, forces[kind][i + 1],
- kind);
- temp_client->addr = forces[kind][i + 1];
- err = i2c_detect_address(temp_client,
- kind, driver);
- if (err)
- goto exit_free;
- }
- }
- }
- }
-
/* Stop here if the classes do not match */
if (!(adapter->class & driver->class))
goto exit_free;
/* Stop here if we can't use SMBUS_QUICK */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
- if (address_data->probe[0] == I2C_CLIENT_END
- && address_data->normal_i2c[0] == I2C_CLIENT_END)
+ if (address_data->normal_i2c[0] == I2C_CLIENT_END)
goto exit_free;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
@@ -1301,48 +1244,12 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
goto exit_free;
}
- /* Probe entries are done second, and are not affected by ignore
- entries either */
- for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
- if (address_data->probe[i] == adap_id
- || address_data->probe[i] == ANY_I2C_BUS) {
- dev_dbg(&adapter->dev, "found probe parameter for "
- "adapter %d, addr 0x%02x\n", adap_id,
- address_data->probe[i + 1]);
- temp_client->addr = address_data->probe[i + 1];
- err = i2c_detect_address(temp_client, -1, driver);
- if (err)
- goto exit_free;
- }
- }
-
- /* Normal entries are done last, unless shadowed by an ignore entry */
for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
- int j, ignore;
-
- ignore = 0;
- for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
- j += 2) {
- if ((address_data->ignore[j] == adap_id ||
- address_data->ignore[j] == ANY_I2C_BUS)
- && address_data->ignore[j + 1]
- == address_data->normal_i2c[i]) {
- dev_dbg(&adapter->dev, "found ignore "
- "parameter for adapter %d, "
- "addr 0x%02x\n", adap_id,
- address_data->ignore[j + 1]);
- ignore = 1;
- break;
- }
- }
- if (ignore)
- continue;
-
dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
"addr 0x%02x\n", adap_id,
address_data->normal_i2c[i]);
temp_client->addr = address_data->normal_i2c[i];
- err = i2c_detect_address(temp_client, -1, driver);
+ err = i2c_detect_address(temp_client, driver);
if (err)
goto exit_free;
}
@@ -1913,7 +1820,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
if (adapter->algo->smbus_xfer) {
- mutex_lock(&adapter->bus_lock);
+ rt_mutex_lock(&adapter->bus_lock);
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
@@ -1927,7 +1834,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
orig_jiffies + adapter->timeout))
break;
}
- mutex_unlock(&adapter->bus_lock);
+ rt_mutex_unlock(&adapter->bus_lock);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command, protocol, data);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 7e13d2df9af..f4110aa4960 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -34,7 +34,6 @@
#include <linux/list.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
-#include <linux/smp_lock.h>
#include <linux/jiffies.h>
#include <asm/uaccess.h>
@@ -445,20 +444,14 @@ static int i2cdev_open(struct inode *inode, struct file *file)
struct i2c_client *client;
struct i2c_adapter *adap;
struct i2c_dev *i2c_dev;
- int ret = 0;
- lock_kernel();
i2c_dev = i2c_dev_get_by_minor(minor);
- if (!i2c_dev) {
- ret = -ENODEV;
- goto out;
- }
+ if (!i2c_dev)
+ return -ENODEV;
adap = i2c_get_adapter(i2c_dev->adap->nr);
- if (!adap) {
- ret = -ENODEV;
- goto out;
- }
+ if (!adap)
+ return -ENODEV;
/* This creates an anonymous i2c_client, which may later be
* pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.
@@ -470,8 +463,7 @@ static int i2cdev_open(struct inode *inode, struct file *file)
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (!client) {
i2c_put_adapter(adap);
- ret = -ENOMEM;
- goto out;
+ return -ENOMEM;
}
snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
client->driver = &i2cdev_driver;
@@ -479,9 +471,7 @@ static int i2cdev_open(struct inode *inode, struct file *file)
client->adapter = adap;
file->private_data = client;
-out:
- unlock_kernel();
- return ret;
+ return 0;
}
static int i2cdev_release(struct inode *inode, struct file *file)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a2ea383105a..2c16ca6501d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -246,6 +246,16 @@ config EP93XX_PWM
To compile this driver as a module, choose M here: the module will
be called ep93xx_pwm.
+config DS1682
+ tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1682 Total Elapsed Time Recorder.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds1682.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e311267a355..906a0edcea4 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_ISL29003) += isl29003.o
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
+obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_C2PORT) += c2port/
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-y += eeprom/
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/misc/ds1682.c
index f3ee4a1abb7..f3ee4a1abb7 100644
--- a/drivers/i2c/chips/ds1682.c
+++ b/drivers/misc/ds1682.c
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
index 6e43ab4231a..4bb7a3af9ad 100644
--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -417,32 +417,25 @@ static int ics932s401_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
-
- vendor = i2c_smbus_read_word_data(client,
- ICS932S401_REG_VENDOR_REV);
- vendor >>= 8;
- revision = vendor >> ICS932S401_REV_SHIFT;
- vendor &= ICS932S401_VENDOR_MASK;
- if (vendor != ICS932S401_VENDOR)
- return -ENODEV;
-
- device = i2c_smbus_read_word_data(client,
- ICS932S401_REG_DEVICE);
- device >>= 8;
- if (device != ICS932S401_DEVICE)
- return -ENODEV;
-
- if (revision != ICS932S401_REV)
- dev_info(&adapter->dev, "Unknown revision %d\n",
- revision);
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ vendor = i2c_smbus_read_word_data(client, ICS932S401_REG_VENDOR_REV);
+ vendor >>= 8;
+ revision = vendor >> ICS932S401_REV_SHIFT;
+ vendor &= ICS932S401_VENDOR_MASK;
+ if (vendor != ICS932S401_VENDOR)
+ return -ENODEV;
+
+ device = i2c_smbus_read_word_data(client, ICS932S401_REG_DEVICE);
+ device >>= 8;
+ if (device != ICS932S401_DEVICE)
+ return -ENODEV;
+
+ if (revision != ICS932S401_REV)
+ dev_info(&adapter->dev, "Unknown revision %d\n", revision);
strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);