diff options
Diffstat (limited to 'drivers')
57 files changed, 1060 insertions, 715 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 087a7028ae8..b9f923ef173 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -50,7 +50,6 @@ config ACPI_SLEEP config ACPI_PROCFS bool "Deprecated /proc/acpi files" depends on PROC_FS - default y ---help--- For backwards compatibility, this option allows deprecated /proc/acpi/ files to exist, even when @@ -61,7 +60,6 @@ config ACPI_PROCFS /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version) /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT) /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP) - /proc/acpi/battery (/sys/class/power_supply) /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer) /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level) @@ -69,7 +67,21 @@ config ACPI_PROCFS and functions which do not yet exist in /sys. Say N to delete /proc/acpi/ files that have moved to /sys/ - +config ACPI_PROCFS_POWER + bool "Deprecated power /proc/acpi folders" + depends on PROC_FS + default y + ---help--- + For backwards compatibility, this option allows + deprecated power /proc/acpi/ folders to exist, even when + they have been replaced by functions in /sys. + The deprecated folders (and their replacements) include: + /proc/acpi/battery/* (/sys/class/power_supply/*) + /proc/acpi/ac_adapter/* (sys/class/power_supply/*) + This option has no effect on /proc/acpi/ folders + and functions, which do not yet exist in /sys + + Say N to delete power /proc/acpi/ folders that have moved to /sys/ config ACPI_PROC_EVENT bool "Deprecated /proc/acpi/event support" depends on PROC_FS diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 54e3ab0e5fc..456446f9007 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -58,6 +58,6 @@ obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o -obj-y += cm_sbs.o +obj-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_SBS) += sbshc.o diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 30238f6ff23..76ed4f52beb 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -27,7 +27,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #endif @@ -51,7 +51,7 @@ MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI AC Adapter Driver"); MODULE_LICENSE("GPL"); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER extern struct proc_dir_entry *acpi_lock_ac_dir(void); extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir); static int acpi_ac_open_fs(struct inode *inode, struct file *file); @@ -86,7 +86,7 @@ struct acpi_ac { #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER static const struct file_operations acpi_ac_fops = { .open = acpi_ac_open_fs, .read = seq_read, @@ -136,7 +136,7 @@ static int acpi_ac_get_state(struct acpi_ac *ac) return 0; } -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -275,7 +275,7 @@ static int acpi_ac_add(struct acpi_device *device) if (result) goto end; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_ac_add_fs(device); #endif if (result) @@ -300,7 +300,7 @@ static int acpi_ac_add(struct acpi_device *device) end: if (result) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_remove_fs(device); #endif kfree(ac); @@ -339,7 +339,7 @@ static int acpi_ac_remove(struct acpi_device *device, int type) ACPI_ALL_NOTIFY, acpi_ac_notify); if (ac->charger.dev) power_supply_unregister(&ac->charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_remove_fs(device); #endif @@ -355,7 +355,7 @@ static int __init acpi_ac_init(void) if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) return -ENODEV; @@ -363,7 +363,7 @@ static int __init acpi_ac_init(void) result = acpi_bus_register_driver(&acpi_ac_driver); if (result < 0) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_ac_dir(acpi_ac_dir); #endif return -ENODEV; @@ -377,7 +377,7 @@ static void __exit acpi_ac_exit(void) acpi_bus_unregister_driver(&acpi_ac_driver); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_ac_dir(acpi_ac_dir); #endif diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 192c244f619..7d6be23eff8 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -31,7 +31,7 @@ #include <linux/types.h> #include <linux/jiffies.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <asm/uaccess.h> @@ -63,7 +63,7 @@ static unsigned int cache_time = 1000; module_param(cache_time, uint, 0644); MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER extern struct proc_dir_entry *acpi_lock_battery_dir(void); extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir); @@ -153,6 +153,8 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_STATUS_CHARGING; else if (battery->state == 0) val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; break; case POWER_SUPPLY_PROP_PRESENT: val->intval = acpi_battery_present(battery); @@ -221,7 +223,7 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER inline char *acpi_battery_units(struct acpi_battery *battery) { return (battery->power_unit)?"mA":"mW"; @@ -479,7 +481,7 @@ static int acpi_battery_update(struct acpi_battery *battery) FS Interface (/proc) -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER static struct proc_dir_entry *acpi_battery_dir; static int acpi_battery_print_info(struct seq_file *seq, int result) @@ -786,7 +788,7 @@ static int acpi_battery_add(struct acpi_device *device) acpi_driver_data(device) = battery; mutex_init(&battery->lock); acpi_battery_update(battery); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_battery_add_fs(device); if (result) goto end; @@ -804,7 +806,7 @@ static int acpi_battery_add(struct acpi_device *device) device->status.battery_present ? "present" : "absent"); end: if (result) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_remove_fs(device); #endif kfree(battery); @@ -823,7 +825,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) status = acpi_remove_notify_handler(device->handle, ACPI_ALL_NOTIFY, acpi_battery_notify); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_remove_fs(device); #endif sysfs_remove_battery(battery); @@ -859,13 +861,13 @@ static int __init acpi_battery_init(void) { if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_dir = acpi_lock_battery_dir(); if (!acpi_battery_dir) return -ENODEV; #endif if (acpi_bus_register_driver(&acpi_battery_driver) < 0) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_battery_dir(acpi_battery_dir); #endif return -ENODEV; @@ -876,7 +878,7 @@ static int __init acpi_battery_init(void) static void __exit acpi_battery_exit(void) { acpi_bus_unregister_driver(&acpi_battery_driver); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_battery_dir(acpi_battery_dir); #endif } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 06b78e5e33a..d411017f8c0 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -47,6 +47,9 @@ #undef PREFIX #define PREFIX "ACPI: EC: " +/* Uncomment next line to get verbose print outs*/ +/* #define DEBUG */ + /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ @@ -75,7 +78,10 @@ enum { EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */ EC_FLAGS_QUERY_PENDING, /* Query is pending */ EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */ - EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */ + EC_FLAGS_NO_ADDRESS_GPE, /* Expect GPE only for non-address event */ + EC_FLAGS_ADDRESS, /* Address is being written */ + EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */ + EC_FLAGS_WDATA, /* Data is being written */ }; static int acpi_ec_remove(struct acpi_device *device, int type); @@ -131,21 +137,27 @@ static struct acpi_ec { static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { - return inb(ec->command_addr); + u8 x = inb(ec->command_addr); + pr_debug(PREFIX "---> status = 0x%2x\n", x); + return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { + u8 x = inb(ec->data_addr); + pr_debug(PREFIX "---> data = 0x%2x\n", x); return inb(ec->data_addr); } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { + pr_debug(PREFIX "<--- command = 0x%2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { + pr_debug(PREFIX "<--- data = 0x%2x\n", data); outb(data, ec->data_addr); } @@ -166,38 +178,54 @@ static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event) static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { + int ret = 0; + if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) && + test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags))) + force_poll = 1; + if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) && + test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags))) + force_poll = 1; if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) && likely(!force_poll)) { if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event), msecs_to_jiffies(ACPI_EC_DELAY))) - return 0; + goto end; clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (acpi_ec_check_status(ec, event)) { - if (event == ACPI_EC_EVENT_OBF_1) { - /* miss OBF = 1 GPE, don't expect it anymore */ - printk(KERN_INFO PREFIX "missing OBF_1 confirmation," - "switching to degraded mode.\n"); - set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags); + if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) { + /* miss address GPE, don't expect it anymore */ + pr_info(PREFIX "missing address confirmation, " + "don't expect it any longer.\n"); + set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags); + } else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) { + /* miss write data GPE, don't expect it */ + pr_info(PREFIX "missing write data confirmation, " + "don't expect it any longer.\n"); + set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags); } else { /* missing GPEs, switch back to poll mode */ - printk(KERN_INFO PREFIX "missing IBF_1 confirmations," - "switch off interrupt mode.\n"); + if (printk_ratelimit()) + pr_info(PREFIX "missing confirmations, " + "switch off interrupt mode.\n"); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); } - return 0; + goto end; } } else { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) - return 0; + goto end; } } - printk(KERN_ERR PREFIX "acpi_ec_wait timeout," + pr_err(PREFIX "acpi_ec_wait timeout," " status = %d, expect_event = %d\n", acpi_ec_read_status(ec), event); - return -ETIME; + ret = -ETIME; + end: + clear_bit(EC_FLAGS_ADDRESS, &ec->flags); + return ret; } static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, @@ -208,22 +236,26 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, int result = 0; set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_cmd(ec, command); - + pr_debug(PREFIX "transaction start\n"); for (; wdata_len > 0; --wdata_len) { result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { - printk(KERN_ERR PREFIX + pr_err(PREFIX "write_cmd timeout, command = %d\n", command); goto end; } + /* mark the address byte written to EC */ + if (rdata_len + wdata_len > 1) + set_bit(EC_FLAGS_ADDRESS, &ec->flags); set_bit(EC_FLAGS_WAIT_GPE, &ec->flags); acpi_ec_write_data(ec, *(wdata++)); } if (!rdata_len) { + set_bit(EC_FLAGS_WDATA, &ec->flags); result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll); if (result) { - printk(KERN_ERR PREFIX + pr_err(PREFIX "finish-write timeout, command = %d\n", command); goto end; } @@ -231,12 +263,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); for (; rdata_len > 0; --rdata_len) { - if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags)) - force_poll = 1; result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll); if (result) { - printk(KERN_ERR PREFIX "read timeout, command = %d\n", - command); + pr_err(PREFIX "read timeout, command = %d\n", command); goto end; } /* Don't expect GPE after last read */ @@ -245,6 +274,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, *(rdata++) = acpi_ec_read_data(ec); } end: + pr_debug(PREFIX "transaction end\n"); return result; } @@ -273,8 +303,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command, status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0); if (status) { - printk(KERN_ERR PREFIX - "input buffer is not empty, aborting transaction\n"); + pr_err(PREFIX "input buffer is not empty, " + "aborting transaction\n"); goto end; } @@ -488,6 +518,7 @@ static u32 acpi_ec_gpe_handler(void *data) acpi_status status = AE_OK; struct acpi_ec *ec = data; + pr_debug(PREFIX "~~~> interrupt\n"); clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) wake_up(&ec->wait); @@ -498,8 +529,9 @@ static u32 acpi_ec_gpe_handler(void *data) acpi_ec_gpe_query, ec); } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) { /* this is non-query, must be confirmation */ - printk(KERN_INFO PREFIX "non-query interrupt received," - " switching to interrupt mode\n"); + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } @@ -701,10 +733,10 @@ static void ec_remove_handlers(struct acpi_ec *ec) { if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) - printk(KERN_ERR PREFIX "failed to remove space handler\n"); + pr_err(PREFIX "failed to remove space handler\n"); if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler))) - printk(KERN_ERR PREFIX "failed to remove gpe handler\n"); + pr_err(PREFIX "failed to remove gpe handler\n"); ec->handlers_installed = 0; } @@ -747,9 +779,9 @@ static int acpi_ec_add(struct acpi_device *device) first_ec = ec; acpi_driver_data(device) = ec; acpi_ec_add_fs(device); - printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", + pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); - printk(KERN_INFO PREFIX "driver started in %s mode\n", + pr_info(PREFIX "driver started in %s mode\n", (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll"); return 0; } @@ -875,18 +907,26 @@ int __init acpi_ec_ecdt_probe(void) status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { - printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n"); + pr_info(PREFIX "EC description table is found, configuring boot EC\n"); boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; boot_ec->handle = ACPI_ROOT_OBJECT; } else { + /* This workaround is needed only on some broken machines, + * which require early EC, but fail to provide ECDT */ + acpi_handle x; printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n"); status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device, boot_ec, NULL); /* Check that acpi_get_devices actually find something */ if (ACPI_FAILURE(status) || !boot_ec->handle) goto error; + /* We really need to limit this workaround, the only ASUS, + * which needs it, has fake EC._INI method, so use it as flag. + */ + if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x))) + goto error; } ret = ec_install_handlers(boot_ec); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index aabc6ca4a81..e3a673a0084 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -387,17 +387,14 @@ acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width) if (!value) value = &dummy; - switch (width) { - case 8: + *value = 0; + if (width <= 8) { *(u8 *) value = inb(port); - break; - case 16: + } else if (width <= 16) { *(u16 *) value = inw(port); - break; - case 32: + } else if (width <= 32) { *(u32 *) value = inl(port); - break; - default: + } else { BUG(); } @@ -408,17 +405,13 @@ EXPORT_SYMBOL(acpi_os_read_port); acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width) { - switch (width) { - case 8: + if (width <= 8) { outb(value, port); - break; - case 16: + } else if (width <= 16) { outw(value, port); - break; - case 32: + } else if (width <= 32) { outl(value, port); - break; - default: + } else { BUG(); } diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 235a51e328c..015689d295c 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -612,12 +612,6 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) request_region(pr->throttling.address, 6, "ACPI CPU throttle"); } -#ifdef CONFIG_CPU_FREQ - acpi_processor_ppc_has_changed(pr); -#endif - acpi_processor_get_throttling_info(pr); - acpi_processor_get_limit_info(pr); - return 0; } @@ -647,7 +641,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) */ if (processor_device_array[pr->id] != NULL && processor_device_array[pr->id] != device) { - printk(KERN_WARNING "BIOS reported wrong ACPI id" + printk(KERN_WARNING "BIOS reported wrong ACPI id " "for the processor\n"); return -ENODEV; } @@ -665,6 +659,12 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) /* _PDC call should be done before doing anything else (if reqd.). */ arch_acpi_processor_init_pdc(pr); acpi_processor_set_pdc(pr); +#ifdef CONFIG_CPU_FREQ + acpi_processor_ppc_has_changed(pr); +#endif + acpi_processor_get_throttling_info(pr); + acpi_processor_get_limit_info(pr); + acpi_processor_power_init(pr, device); @@ -684,7 +684,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) { struct acpi_processor *pr = data; struct acpi_device *device = NULL; - + int saved; if (!pr) return; @@ -694,7 +694,10 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) switch (event) { case ACPI_PROCESSOR_NOTIFY_PERFORMANCE: + saved = pr->performance_platform_limit; acpi_processor_ppc_has_changed(pr); + if (saved == pr->performance_platform_limit) + break; acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f996d0e3768..b1fbee3f7fe 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -197,6 +197,19 @@ static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2) return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2); } +static void acpi_safe_halt(void) +{ + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + if (!need_resched()) + safe_halt(); + current_thread_info()->status |= TS_POLLING; +} + #ifndef CONFIG_CPU_IDLE static void @@ -239,19 +252,6 @@ acpi_processor_power_activate(struct acpi_processor *pr, return; } -static void acpi_safe_halt(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); - current_thread_info()->status |= TS_POLLING; -} - static atomic_t c3_cpu_count; /* Common C-state entry for C2, C3, .. */ @@ -1373,15 +1373,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (pr->flags.bm_check) acpi_idle_update_bm_rld(pr, cx); - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we test - * NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); - current_thread_info()->status |= TS_POLLING; + acpi_safe_halt(); cx->usage++; @@ -1399,6 +1391,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); u32 t1, t2; + int sleep_ticks = 0; + pr = processors[smp_processor_id()]; if (unlikely(!pr)) @@ -1428,6 +1422,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, ACPI_FLUSH_CPU_CACHE(); t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); acpi_state_timer_broadcast(pr, cx, 1); acpi_idle_do_entry(cx); t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); @@ -1436,6 +1432,10 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, /* TSC could halt in idle, so notify users */ mark_tsc_unstable("TSC halts in idle");; #endif + sleep_ticks = ticks_elapsed(t1, t2); + + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); local_irq_enable(); current_thread_info()->status |= TS_POLLING; @@ -1443,7 +1443,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, cx->usage++; acpi_state_timer_broadcast(pr, cx, 0); - cx->time += ticks_elapsed(t1, t2); + cx->time += sleep_ticks; return ticks_elapsed_in_us(t1, t2); } @@ -1463,6 +1463,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); u32 t1, t2; + int sleep_ticks = 0; + pr = processors[smp_processor_id()]; if (unlikely(!pr)) @@ -1471,6 +1473,15 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (acpi_idle_suspend) return(acpi_idle_enter_c1(dev, state)); + if (acpi_idle_bm_check()) { + if (dev->safe_state) { + return dev->safe_state->enter(dev, dev->safe_state); + } else { + acpi_safe_halt(); + return 0; + } + } + local_irq_disable(); current_thread_info()->status &= ~TS_POLLING; /* @@ -1485,38 +1496,45 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, return 0; } + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); /* * Must be done before busmaster disable as we might need to * access HPET ! */ acpi_state_timer_broadcast(pr, cx, 1); - if (acpi_idle_bm_check()) { - cx = pr->power.bm_state; - - acpi_idle_update_bm_rld(pr, cx); - - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - acpi_idle_do_entry(cx); - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); - } else { - acpi_idle_update_bm_rld(pr, cx); + acpi_idle_update_bm_rld(pr, cx); + /* + * disable bus master + * bm_check implies we need ARB_DIS + * !bm_check implies we need cache flush + * bm_control implies whether we can do ARB_DIS + * + * That leaves a case where bm_check is set and bm_control is + * not set. In that case we cannot do much, we enter C3 + * without doing anything. + */ + if (pr->flags.bm_check && pr->flags.bm_control) { spin_lock(&c3_lock); c3_cpu_count++; /* Disable bus master arbitration when all CPUs are in C3 */ if (c3_cpu_count == num_online_cpus()) acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); spin_unlock(&c3_lock); + } else if (!pr->flags.bm_check) { + ACPI_FLUSH_CPU_CACHE(); + } - t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); - acpi_idle_do_entry(cx); - t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); + t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); + acpi_idle_do_entry(cx); + t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); + /* Re-enable bus master arbitration */ + if (pr->flags.bm_check && pr->flags.bm_control) { spin_lock(&c3_lock); - /* Re-enable bus master arbitration */ - if (c3_cpu_count == num_online_cpus()) - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); c3_cpu_count--; spin_unlock(&c3_lock); } @@ -1525,6 +1543,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, /* TSC could halt in idle, so notify users */ mark_tsc_unstable("TSC halts in idle"); #endif + sleep_ticks = ticks_elapsed(t1, t2); + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); local_irq_enable(); current_thread_info()->status |= TS_POLLING; @@ -1532,7 +1553,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, cx->usage++; acpi_state_timer_broadcast(pr, cx, 0); - cx->time += ticks_elapsed(t1, t2); + cx->time += sleep_ticks; return ticks_elapsed_in_us(t1, t2); } @@ -1584,12 +1605,14 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) case ACPI_STATE_C1: state->flags |= CPUIDLE_FLAG_SHALLOW; state->enter = acpi_idle_enter_c1; + dev->safe_state = state; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_BALANCED; state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; + dev->safe_state = state; break; case ACPI_STATE_C3: @@ -1610,14 +1633,6 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) if (!count) return -EINVAL; - /* find the deepest state that can handle active BM */ - if (pr->flags.bm_check) { - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) - if (pr->power.states[i].type == ACPI_STATE_C3) - break; - pr->power.bm_state = &pr->power.states[i-1]; - } - return 0; } @@ -1658,6 +1673,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, if (!first_run) { dmi_check_system(processor_power_dmi_table); + max_cstate = acpi_processor_cstate_check(max_cstate); if (max_cstate < ACPI_C_STATES_MAX) printk(KERN_NOTICE "ACPI: processor limited to max C-state %d\n", diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 0b8204e7082..c26c61fb36c 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -70,7 +70,55 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) int acpi_processor_tstate_has_changed(struct acpi_processor *pr) { - return acpi_processor_get_platform_limit(pr); + int result = 0; + int throttling_limit; + int current_state; + struct acpi_processor_limit *limit; + int target_state; + + result = acpi_processor_get_platform_limit(pr); + if (result) { + /* Throttling Limit is unsupported */ + return result; + } + + throttling_limit = pr->throttling_platform_limit; + if (throttling_limit >= pr->throttling.state_count) { + /* Uncorrect Throttling Limit */ + return -EINVAL; + } + + current_state = pr->throttling.state; + if (current_state > throttling_limit) { + /* + * The current state can meet the requirement of + * _TPC limit. But it is reasonable that OSPM changes + * t-states from high to low for better performance. + * Of course the limit condition of thermal + * and user should be considered. + */ + limit = &pr->limit; + target_state = throttling_limit; + if (limit->thermal.tx > target_state) + target_state = limit->thermal.tx; + if (limit->user.tx > target_state) + target_state = limit->user.tx; + } else if (current_state == throttling_limit) { + /* + * Unnecessary to change the throttling state + */ + return 0; + } else { + /* + * If the current state is lower than the limit of _TPC, it + * will be forced to switch to the throttling state defined + * by throttling_platfor_limit. + * Because the previous state meets with the limit condition + * of thermal and user, it is unnecessary to check it again. + */ + target_state = throttling_limit; + } + return acpi_processor_set_throttling(pr, target_state); } /* @@ -83,6 +131,7 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr) struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *ptc = NULL; union acpi_object obj = { 0 }; + struct acpi_processor_throttling *throttling; status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer); if (ACPI_FAILURE(status)) { @@ -134,6 +183,22 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr) memcpy(&pr->throttling.status_register, obj.buffer.pointer, sizeof(struct acpi_ptc_register)); + throttling = &pr->throttling; + + if ((throttling->control_register.bit_width + + throttling->control_register.bit_offset) > 32) { + printk(KERN_ERR PREFIX "Invalid _PTC control register\n"); + result = -EFAULT; + goto end; + } + + if ((throttling->status_register.bit_width + + throttling->status_register.bit_offset) > 32) { + printk(KERN_ERR PREFIX "Invalid _PTC status register\n"); + result = -EFAULT; + goto end; + } + end: kfree(buffer.pointer); @@ -328,44 +393,132 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr) return 0; } -static int acpi_read_throttling_status(struct acpi_processor_throttling - *throttling) +#ifdef CONFIG_X86 +static int acpi_throttling_rdmsr(struct acpi_processor *pr, + acpi_integer * value) { - int value = -1; + struct cpuinfo_x86 *c; + u64 msr_high, msr_low; + unsigned int cpu; + u64 msr = 0; + int ret = -1; + + cpu = pr->id; + c = &cpu_data(cpu); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + !cpu_has(c, X86_FEATURE_ACPI)) { + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + } else { + msr_low = 0; + msr_high = 0; + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, + (u32 *)&msr_low , (u32 *) &msr_high); + msr = (msr_high << 32) | msr_low; + *value = (acpi_integer) msr; + ret = 0; + } + return ret; +} + +static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +{ + struct cpuinfo_x86 *c; + unsigned int cpu; + int ret = -1; + u64 msr; + + cpu = pr->id; + c = &cpu_data(cpu); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + !cpu_has(c, X86_FEATURE_ACPI)) { + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + } else { + msr = value; + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, + msr & 0xffffffff, msr >> 32); + ret = 0; + } + return ret; +} +#else +static int acpi_throttling_rdmsr(struct acpi_processor *pr, + acpi_integer * value) +{ + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + return -1; +} + +static int acpi_throttling_wrmsr(struct acpi_processor *pr, acpi_integer value) +{ + printk(KERN_ERR PREFIX + "HARDWARE addr space,NOT supported yet\n"); + return -1; +} +#endif + +static int acpi_read_throttling_status(struct acpi_processor *pr, + acpi_integer *value) +{ + u32 bit_width, bit_offset; + u64 ptc_value; + u64 ptc_mask; + struct acpi_processor_throttling *throttling; + int ret = -1; + + throttling = &pr->throttling; switch (throttling->status_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + ptc_value = 0; + bit_width = throttling->status_register.bit_width; + bit_offset = throttling->status_register.bit_offset; + acpi_os_read_port((acpi_io_address) throttling->status_register. - address, &value, - (u32) throttling->status_register.bit_width * - 8); + address, (u32 *) &ptc_value, + (u32) (bit_width + bit_offset)); + ptc_mask = (1 << bit_width) - 1; + *value = (acpi_integer) ((ptc_value >> bit_offset) & ptc_mask); + ret = 0; break; case ACPI_ADR_SPACE_FIXED_HARDWARE: - printk(KERN_ERR PREFIX - "HARDWARE addr space,NOT supported yet\n"); + ret = acpi_throttling_rdmsr(pr, value); break; default: printk(KERN_ERR PREFIX "Unknown addr space %d\n", (u32) (throttling->status_register.space_id)); } - return value; + return ret; } -static int acpi_write_throttling_state(struct acpi_processor_throttling - *throttling, int value) +static int acpi_write_throttling_state(struct acpi_processor *pr, + acpi_integer value) { + u32 bit_width, bit_offset; + u64 ptc_value; + u64 ptc_mask; + struct acpi_processor_throttling *throttling; int ret = -1; + throttling = &pr->throttling; switch (throttling->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: + bit_width = throttling->control_register.bit_width; + bit_offset = throttling->control_register.bit_offset; + ptc_mask = (1 << bit_width) - 1; + ptc_value = value & ptc_mask; + acpi_os_write_port((acpi_io_address) throttling-> - control_register.address, value, - (u32) throttling->control_register. - bit_width * 8); + control_register.address, + (u32) (ptc_value << bit_offset), + (u32) (bit_width + bit_offset)); ret = 0; break; case ACPI_ADR_SPACE_FIXED_HARDWARE: - printk(KERN_ERR PREFIX - "HARDWARE addr space,NOT supported yet\n"); + ret = acpi_throttling_wrmsr(pr, value); break; default: printk(KERN_ERR PREFIX "Unknown addr space %d\n", @@ -374,7 +527,8 @@ static int acpi_write_throttling_state(struct acpi_processor_throttling return ret; } -static int acpi_get_throttling_state(struct acpi_processor *pr, int value) +static int acpi_get_throttling_state(struct acpi_processor *pr, + acpi_integer value) { int i; @@ -390,22 +544,26 @@ static int acpi_get_throttling_state(struct acpi_processor *pr, int value) return i; } -static int acpi_get_throttling_value(struct acpi_processor *pr, int state) +static int acpi_get_throttling_value(struct acpi_processor *pr, + int state, acpi_integer *value) { - int value = -1; + int ret = -1; + if (state >= 0 && state <= pr->throttling.state_count) { struct acpi_processor_tx_tss *tx = (struct acpi_processor_tx_tss *)&(pr->throttling. states_tss[state]); - value = tx->control; + *value = tx->control; + ret = 0; } - return value; + return ret; } static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) { int state = 0; - u32 value = 0; + int ret; + acpi_integer value; if (!pr) return -EINVAL; @@ -415,8 +573,9 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) pr->throttling.state = 0; local_irq_disable(); - value = acpi_read_throttling_status(&pr->throttling); - if (value >= 0) { + value = 0; + ret = acpi_read_throttling_status(pr, &value); + if (ret >= 0) { state = acpi_get_throttling_state(pr, value); pr->throttling.state = state; } @@ -430,6 +589,40 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr) return pr->throttling.acpi_processor_get_throttling(pr); } +static int acpi_processor_get_fadt_info(struct acpi_processor *pr) +{ + int i, step; + + if (!pr->throttling.address) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); + return -EINVAL; + } else if (!pr->throttling.duty_width) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); + return -EINVAL; + } + /* TBD: Support duty_cycle values that span bit 4. */ + else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { + printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); + return -EINVAL; + } + + pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; + + /* + * Compute state values. Note that throttling displays a linear power + * performance relationship (at 50% performance the CPU will consume + * 50% power). Values are in 1/10th of a percent to preserve accuracy. + */ + + step = (1000 / pr->throttling.state_count); + + for (i = 0; i < pr->throttling.state_count; i++) { + pr->throttling.states[i].performance = 1000 - step * i; + pr->throttling.states[i].power = 1000 - step * i; + } + return 0; +} + static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, int state) { @@ -506,7 +699,8 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, int state) { - u32 value = 0; + int ret; + acpi_integer value; if (!pr) return -EINVAL; @@ -524,10 +718,10 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, return -EPERM; local_irq_disable(); - - value = acpi_get_throttling_value(pr, state); - if (value >= 0) { - acpi_write_throttling_state(&pr->throttling, value); + value = 0; + ret = acpi_get_throttling_value(pr, state, &value); + if (ret >= 0) { + acpi_write_throttling_state(pr, value); pr->throttling.state = state; } local_irq_enable(); @@ -543,8 +737,6 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) int acpi_processor_get_throttling_info(struct acpi_processor *pr) { int result = 0; - int step = 0; - int i = 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", @@ -563,6 +755,8 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) acpi_processor_get_throttling_states(pr) || acpi_processor_get_platform_limit(pr)) { + if (acpi_processor_get_fadt_info(pr)) + return 0; pr->throttling.acpi_processor_get_throttling = &acpi_processor_get_throttling_fadt; pr->throttling.acpi_processor_set_throttling = @@ -576,19 +770,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) acpi_processor_get_tsd(pr); - if (!pr->throttling.address) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n")); - return 0; - } else if (!pr->throttling.duty_width) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n")); - return 0; - } - /* TBD: Support duty_cycle values that span bit 4. */ - else if ((pr->throttling.duty_offset + pr->throttling.duty_width) > 4) { - printk(KERN_WARNING PREFIX "duty_cycle spans bit 4\n"); - return 0; - } - /* * PIIX4 Errata: We don't support throttling on the original PIIX4. * This shouldn't be an issue as few (if any) mobile systems ever @@ -600,21 +781,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) return 0; } - pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width; - - /* - * Compute state values. Note that throttling displays a linear power/ - * performance relationship (at 50% performance the CPU will consume - * 50% power). Values are in 1/10th of a percent to preserve accuracy. - */ - - step = (1000 / pr->throttling.state_count); - - for (i = 0; i < pr->throttling.state_count; i++) { - pr->throttling.states[i].performance = step * i; - pr->throttling.states[i].power = step * i; - } - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n", pr->throttling.state_count)); diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 90fd09c65f9..6045cdbe176 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -29,7 +29,7 @@ #include <linux/moduleparam.h> #include <linux/kernel.h> -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <asm/uaccess.h> @@ -88,7 +88,7 @@ MODULE_DEVICE_TABLE(acpi, sbs_device_ids); struct acpi_battery { struct power_supply bat; struct acpi_sbs *sbs; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER struct proc_dir_entry *proc_entry; #endif unsigned long update_time; @@ -113,6 +113,7 @@ struct acpi_battery { u16 spec; u8 id; u8 present:1; + u8 have_sysfs_alarm:1; }; #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat); @@ -122,7 +123,7 @@ struct acpi_sbs { struct acpi_device *device; struct acpi_smb_hc *hc; struct mutex lock; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER struct proc_dir_entry *charger_entry; #endif struct acpi_battery battery[MAX_SBS_BAT]; @@ -468,7 +469,7 @@ static struct device_attribute alarm_attr = { FS Interface (/proc/acpi) -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER /* Generic Routines */ static int acpi_sbs_add_fs(struct proc_dir_entry **dir, @@ -789,7 +790,7 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) return result; sprintf(battery->name, ACPI_BATTERY_DIR_NAME, id); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_sbs_add_fs(&battery->proc_entry, acpi_battery_dir, battery->name, &acpi_battery_info_fops, &acpi_battery_state_fops, &acpi_battery_alarm_fops, @@ -808,7 +809,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) } battery->bat.get_property = acpi_sbs_battery_get_property; result = power_supply_register(&sbs->device->dev, &battery->bat); - device_create_file(battery->bat.dev, &alarm_attr); + if (result) + goto end; + result = device_create_file(battery->bat.dev, &alarm_attr); + if (result) + goto end; + battery->have_sysfs_alarm = 1; + end: printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n", ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device), battery->name, sbs->battery->present ? "present" : "absent"); @@ -817,14 +824,16 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { - if (sbs->battery[id].bat.dev) - device_remove_file(sbs->battery[id].bat.dev, &alarm_attr); - power_supply_unregister(&sbs->battery[id].bat); -#ifdef CONFIG_ACPI_PROCFS - if (sbs->battery[id].proc_entry) { - acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry), - acpi_battery_dir); + struct acpi_battery *battery = &sbs->battery[id]; + + if (battery->bat.dev) { + if (battery->have_sysfs_alarm) + device_remove_file(battery->bat.dev, &alarm_attr); + power_supply_unregister(&battery->bat); } +#ifdef CONFIG_ACPI_PROCFS_POWER + if (battery->proc_entry) + acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir); #endif } @@ -835,7 +844,7 @@ static int acpi_charger_add(struct acpi_sbs *sbs) result = acpi_ac_get_present(sbs); if (result) goto end; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER result = acpi_sbs_add_fs(&sbs->charger_entry, acpi_ac_dir, ACPI_AC_DIR_NAME, NULL, &acpi_ac_state_fops, NULL, sbs); @@ -859,7 +868,7 @@ static void acpi_charger_remove(struct acpi_sbs *sbs) { if (sbs->charger.dev) power_supply_unregister(&sbs->charger); -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER if (sbs->charger_entry) acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir); #endif @@ -965,7 +974,7 @@ static int acpi_sbs_remove(struct acpi_device *device, int type) static void acpi_sbs_rmdirs(void) { -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER if (acpi_ac_dir) { acpi_unlock_ac_dir(acpi_ac_dir); acpi_ac_dir = NULL; @@ -1004,7 +1013,7 @@ static int __init acpi_sbs_init(void) if (acpi_disabled) return -ENODEV; -#ifdef CONFIG_ACPI_PROCFS +#ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_dir = acpi_lock_ac_dir(); if (!acpi_ac_dir) return -ENODEV; diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c index 5f1d85f2ffe..010f19652f8 100644 --- a/drivers/acpi/tables/tbutils.c +++ b/drivers/acpi/tables/tbutils.c @@ -449,7 +449,7 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) /* XSDT has NULL entry, RSDT is used */ address = rsdt_address; table_entry_size = sizeof(u32); - ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry," + ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry, " "using RSDT")); } } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bac956b30c5..44a0d9ba9bd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -29,6 +29,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/list.h> +#include <linux/mutex.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/input.h> @@ -135,8 +136,8 @@ struct acpi_video_bus { u8 attached_count; struct acpi_video_bus_cap cap; struct acpi_video_bus_flags flags; - struct semaphore sem; struct list_head video_device_list; + struct mutex device_list_lock; /* protects video_device_list */ struct proc_dir_entry *dir; struct input_dev *input; char phys[32]; /* for input device */ @@ -896,7 +897,7 @@ acpi_video_device_write_brightness(struct file *file, { struct seq_file *m = file->private_data; struct acpi_video_device *dev = m->private; - char str[4] = { 0 }; + char str[5] = { 0 }; unsigned int level = 0; int i; @@ -1436,9 +1437,9 @@ acpi_video_bus_get_one_device(struct acpi_device *device, return -ENODEV; } - down(&video->sem); + mutex_lock(&video->device_list_lock); list_add_tail(&data->entry, &video->video_device_list); - up(&video->sem); + mutex_unlock(&video->device_list_lock); acpi_video_device_add_fs(device); @@ -1462,12 +1463,14 @@ acpi_video_bus_get_one_device(struct acpi_device *device, static void acpi_video_device_rebind(struct acpi_video_bus *video) { - struct list_head *node, *next; - list_for_each_safe(node, next, &video->video_device_list) { - struct acpi_video_device *dev = - container_of(node, struct acpi_video_device, entry); + struct acpi_video_device *dev; + + mutex_lock(&video->device_list_lock); + + list_for_each_entry(dev, &video->video_device_list, entry) acpi_video_device_bind(video, dev); - } + + mutex_unlock(&video->device_list_lock); } /* @@ -1592,30 +1595,33 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video) static int acpi_video_switch_output(struct acpi_video_bus *video, int event) { - struct list_head *node, *next; + struct list_head *node; struct acpi_video_device *dev = NULL; struct acpi_video_device *dev_next = NULL; struct acpi_video_device *dev_prev = NULL; unsigned long state; int status = 0; + mutex_lock(&video->device_list_lock); - list_for_each_safe(node, next, &video->video_device_list) { + list_for_each(node, &video->video_device_list) { dev = container_of(node, struct acpi_video_device, entry); status = acpi_video_device_get_state(dev, &state); if (state & 0x2) { - dev_next = - container_of(node->next, struct acpi_video_device, - entry); - dev_prev = - container_of(node->prev, struct acpi_video_device, - entry); + dev_next = container_of(node->next, + struct acpi_video_device, entry); + dev_prev = container_of(node->prev, + struct acpi_video_device, entry); goto out; } } + dev_next = container_of(node->next, struct acpi_video_device, entry); dev_prev = container_of(node->prev, struct acpi_video_device, entry); - out: + + out: + mutex_unlock(&video->device_list_lock); + switch (event) { case ACPI_VIDEO_NOTIFY_CYCLE: case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: @@ -1691,24 +1697,17 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, struct acpi_device *device) { int status = 0; - struct list_head *node, *next; - + struct acpi_device *dev; acpi_video_device_enumerate(video); - list_for_each_safe(node, next, &device->children) { - struct acpi_device *dev = - list_entry(node, struct acpi_device, node); - - if (!dev) - continue; + list_for_each_entry(dev, &device->children, node) { status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Cant attach device")); continue; } - } return status; } @@ -1724,9 +1723,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) video = device->video; - down(&video->sem); - list_del(&device->entry); - up(&video->sem); acpi_video_device_remove_fs(device->dev); status = acpi_remove_notify_handler(device->dev->handle, @@ -1734,32 +1730,34 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) acpi_video_device_notify); backlight_device_unregister(device->backlight); video_output_unregister(device->output_dev); + return 0; } static int acpi_video_bus_put_devices(struct acpi_video_bus *video) { int status; - struct list_head *node, *next; + struct acpi_video_device *dev, *next; + mutex_lock(&video->device_list_lock); - list_for_each_safe(node, next, &video->video_device_list) { - struct acpi_video_device *data = - list_entry(node, struct acpi_video_device, entry); - if (!data) - continue; + list_for_each_entry_safe(dev, next, &video->video_device_list, entry) { - status = acpi_video_bus_put_one_device(data); + status = acpi_video_bus_put_one_device(dev); if (ACPI_FAILURE(status)) printk(KERN_WARNING PREFIX "hhuuhhuu bug in acpi video driver.\n"); - if (data->brightness) - kfree(data->brightness->levels); - kfree(data->brightness); - kfree(data); + if (dev->brightness) { + kfree(dev->brightness->levels); + kfree(dev->brightness); + } + list_del(&dev->entry); + kfree(dev); } + mutex_unlock(&video->device_list_lock); + return 0; } @@ -1782,9 +1780,6 @@ static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) struct input_dev *input; int keycode; - - printk("video bus notify\n"); - if (!video) return; @@ -1897,14 +1892,10 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) static int instance; static int acpi_video_bus_add(struct acpi_device *device) { - int result = 0; - acpi_status status = 0; - struct acpi_video_bus *video = NULL; + acpi_status status; + struct acpi_video_bus *video; struct input_dev *input; - - - if (!device) - return -EINVAL; + int error; video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) @@ -1923,15 +1914,15 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_driver_data(device) = video; acpi_video_bus_find_cap(video); - result = acpi_video_bus_check(video); - if (result) - goto end; + error = acpi_video_bus_check(video); + if (error) + goto err_free_video; - result = acpi_video_bus_add_fs(device); - if (result) - goto end; + error = acpi_video_bus_add_fs(device); + if (error) + goto err_free_video; - init_MUTEX(&video->sem); + mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); acpi_video_bus_get_devices(video, device); @@ -1943,16 +1934,15 @@ static int acpi_video_bus_add(struct acpi_device *device) if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error installing notify handler\n")); - acpi_video_bus_stop_devices(video); - acpi_video_bus_put_devices(video); - kfree(video->attached_array); - acpi_video_bus_remove_fs(device); - result = -ENODEV; - goto end; + error = -ENODEV; + goto err_stop_video; } - video->input = input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto err_uninstall_notify; + } snprintf(video->phys, sizeof(video->phys), "%s/video/input0", acpi_device_hid(video->device)); @@ -1961,6 +1951,7 @@ static int acpi_video_bus_add(struct acpi_device *device) input->phys = video->phys; input->id.bustype = BUS_HOST; input->id.product = 0x06; + input->dev.parent = &device->dev; input->evbit[0] = BIT(EV_KEY); set_bit(KEY_SWITCHVIDEOMODE, input->keybit); set_bit(KEY_VIDEO_NEXT, input->keybit); @@ -1971,18 +1962,10 @@ static int acpi_video_bus_add(struct acpi_device *device) set_bit(KEY_BRIGHTNESS_ZERO, input->keybit); set_bit(KEY_DISPLAY_OFF, input->keybit); set_bit(KEY_UNKNOWN, input->keybit); - result = input_register_device(input); - if (result) { - acpi_remove_notify_handler(video->device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); - acpi_video_bus_stop_devices(video); - acpi_video_bus_put_devices(video); - kfree(video->attached_array); - acpi_video_bus_remove_fs(device); - goto end; - } + error = input_register_device(input); + if (error) + goto err_free_input_dev; printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), @@ -1990,11 +1973,23 @@ static int acpi_video_bus_add(struct acpi_device *device) video->flags.rom ? "yes" : "no", video->flags.post ? "yes" : "no"); - end: - if (result) - kfree(video); + return 0; + + err_free_input_dev: + input_free_device(input); + err_uninstall_notify: + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_video_bus_notify); + err_stop_video: + acpi_video_bus_stop_devices(video); + acpi_video_bus_put_devices(video); + kfree(video->attached_array); + acpi_video_bus_remove_fs(device); + err_free_video: + kfree(video); + acpi_driver_data(device) = NULL; - return result; + return error; } static int acpi_video_bus_remove(struct acpi_device *device, int type) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 328ce8a0842..483269db2c7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -119,18 +119,19 @@ enum { PIIX_80C_SEC = (1 << 7) | (1 << 6), /* controller IDs */ - piix_pata_33 = 0, /* PIIX4 at 33Mhz */ - ich_pata_33 = 1, /* ICH up to UDMA 33 only */ - ich_pata_66 = 2, /* ICH up to 66 Mhz */ - ich_pata_100 = 3, /* ICH up to UDMA 100 */ - ich5_sata = 5, - ich6_sata = 6, - ich6_sata_ahci = 7, - ich6m_sata_ahci = 8, - ich8_sata_ahci = 9, - piix_pata_mwdma = 10, /* PIIX3 MWDMA only */ - tolapai_sata_ahci = 11, - ich9_2port_sata = 12, + piix_pata_mwdma = 0, /* PIIX3 MWDMA only */ + piix_pata_33, /* PIIX4 at 33Mhz */ + ich_pata_33, /* ICH up to UDMA 33 only */ + ich_pata_66, /* ICH up to 66 Mhz */ + ich_pata_100, /* ICH up to UDMA 100 */ + ich5_sata, + ich6_sata, + ich6_sata_ahci, + ich6m_sata_ahci, + ich8_sata_ahci, + ich8_2port_sata, + ich8m_apple_sata_ahci, /* locks up on second port enable */ + tolapai_sata_ahci, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -239,19 +240,21 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller 1 IDE (ICH8) */ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller 2 IDE (ICH8) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* Mobile SATA Controller IDE (ICH8M) */ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* Mobile SATA Controller IDE (ICH8M), Apple */ + { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (ICH9) */ - { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9) */ - { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ - { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ - { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata }, + { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (ICH9M) */ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (Tolapai) */ @@ -427,7 +430,7 @@ static const struct piix_map_db ich6m_map_db = { static const struct piix_map_db ich8_map_db = { .mask = 0x3, - .port_enable = 0x3, + .port_enable = 0xf, .map = { /* PM PS SM SS MAP */ { P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */ @@ -437,7 +440,7 @@ static const struct piix_map_db ich8_map_db = { }, }; -static const struct piix_map_db tolapai_map_db = { +static const struct piix_map_db ich8_2port_map_db = { .mask = 0x3, .port_enable = 0x3, .map = { @@ -449,7 +452,19 @@ static const struct piix_map_db tolapai_map_db = { }, }; -static const struct piix_map_db ich9_2port_map_db = { +static const struct piix_map_db ich8m_apple_map_db = { + .mask = 0x3, + .port_enable = 0x1, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, NA, NA }, /* 00b */ + { RV, RV, RV, RV }, + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db tolapai_map_db = { .mask = 0x3, .port_enable = 0x3, .map = { @@ -467,11 +482,21 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich8_sata_ahci] = &ich8_map_db, + [ich8_2port_sata] = &ich8_2port_map_db, + [ich8m_apple_sata_ahci] = &ich8m_apple_map_db, [tolapai_sata_ahci] = &tolapai_map_db, - [ich9_2port_sata] = &ich9_2port_map_db, }; static struct ata_port_info piix_port_info[] = { + [piix_pata_mwdma] = /* PIIX3 MWDMA only */ + { + .sht = &piix_sht, + .flags = PIIX_PATA_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ + .port_ops = &piix_pata_ops, + }, + [piix_pata_33] = /* PIIX4 at 33MHz */ { .sht = &piix_sht, @@ -565,13 +590,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - [piix_pata_mwdma] = /* PIIX3 MWDMA only */ + [ich8_2port_sata] = { .sht = &piix_sht, - .flags = PIIX_PATA_FLAGS, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ - .port_ops = &piix_pata_ops, + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, }, [tolapai_sata_ahci] = @@ -585,7 +612,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - [ich9_2port_sata] = + [ich8m_apple_sata_ahci] = { .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | @@ -595,6 +622,7 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + }; static struct pci_bits piix_enable_bits[] = { @@ -974,6 +1002,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "SATELLITE U205", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"), + }, + }, + { .ident = "Portege M500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -1086,12 +1121,12 @@ static int piix_disable_ahci(struct pci_dev *pdev) if (!mmio) return -ENOMEM; - tmp = readl(mmio + AHCI_GLOBAL_CTL); + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); if (tmp & AHCI_ENABLE) { tmp &= ~AHCI_ENABLE; - writel(tmp, mmio + AHCI_GLOBAL_CTL); + iowrite32(tmp, mmio + AHCI_GLOBAL_CTL); - tmp = readl(mmio + AHCI_GLOBAL_CTL); + tmp = ioread32(mmio + AHCI_GLOBAL_CTL); if (tmp & AHCI_ENABLE) rc = -EIO; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 81898036dbc..33f06277b3b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -30,6 +30,14 @@ * Hardware documentation available from http://www.t13.org/ and * http://www.sata-io.org/ * + * Standards documents from: + * http://www.t13.org (ATA standards, PCI DMA IDE spec) + * http://www.t10.org (SCSI MMC - for ATAPI MMC) + * http://www.sata-io.org (SATA) + * http://www.compactflash.org (CF) + * http://www.qic.org (QIC157 - Tape and DSC) + * http://www.ce-ata.org (CE-ATA: not supported) + * */ #include <linux/kernel.h> @@ -2307,8 +2315,10 @@ int ata_dev_configure(struct ata_device *dev) } if ((dev->class == ATA_DEV_ATAPI) && - (atapi_command_packet_set(id) == TYPE_TAPE)) + (atapi_command_packet_set(id) == TYPE_TAPE)) { dev->max_sectors = ATA_MAX_SECTORS_TAPE; + dev->horkage |= ATA_HORKAGE_STUCK_ERR; + } if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, @@ -2581,81 +2591,6 @@ void sata_print_link_status(struct ata_link *link) } /** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - struct ata_link *link = &ap->link; - unsigned long timeout = jiffies + (HZ * 5); - u32 sstatus; - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(link, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(link, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(link); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_link_offline(link)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** * ata_dev_pair - return other device on cable * @adev: device * @@ -5490,11 +5425,19 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device " - "error, dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_port_printk(ap, KERN_WARNING, + "DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } } /* Send the CDB (atapi) or the first data block (ata pio out). @@ -7653,8 +7596,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable); EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); @@ -7725,7 +7666,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(ata_port_pbar_desc); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_link_abort); EXPORT_SYMBOL_GPL(ata_port_abort); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ed8813b222a..0dac69db1fd 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -559,101 +559,6 @@ void ata_port_wait_eh(struct ata_port *ap) } } -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(ap->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " - "stat 0x%x host_stat 0x%x\n", - qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= AC_ERR_TIMEOUT; - break; - } - - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag)); - - DPRINTK("EXIT\n"); -} - static int ata_eh_nr_in_flight(struct ata_port *ap) { unsigned int tag; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 94144ed50a6..a883bb03d4c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2485,11 +2485,40 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) if (!using_pio && ata_check_atapi_dma(qc)) using_pio = 1; - /* Some controller variants snoop this value for Packet transfers - to do state machine and FIFO management. Thus we want to set it - properly, and for DMA where it is effectively meaningless */ + /* Some controller variants snoop this value for Packet + * transfers to do state machine and FIFO management. Thus we + * want to set it properly, and for DMA where it is + * effectively meaningless. + */ nbytes = min(qc->nbytes, (unsigned int)63 * 1024); + /* Most ATAPI devices which honor transfer chunk size don't + * behave according to the spec when odd chunk size which + * matches the transfer length is specified. If the number of + * bytes to transfer is 2n+1. According to the spec, what + * should happen is to indicate that 2n+1 is going to be + * transferred and transfer 2n+2 bytes where the last byte is + * padding. + * + * In practice, this doesn't happen. ATAPI devices first + * indicate and transfer 2n bytes and then indicate and + * transfer 2 bytes where the last byte is padding. + * + * This inconsistency confuses several controllers which + * perform PIO using DMA such as Intel AHCIs and sil3124/32. + * These controllers use actual number of transferred bytes to + * update DMA poitner and transfer of 4n+2 bytes make those + * controller push DMA pointer by 4n+4 bytes because SATA data + * FISes are aligned to 4 bytes. This causes data corruption + * and buffer overrun. + * + * Always setting nbytes to even number solves this problem + * because then ATAPI devices don't have to split data at 2n + * boundaries. + */ + if (nbytes & 0x1) + nbytes++; + qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); @@ -2869,7 +2898,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, xlat_func = NULL; if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { /* relay SCSI command to ATAPI device */ - if (unlikely(scmd->cmd_len > dev->cdb_len)) + int len = COMMAND_SIZE(scsi_op); + if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) goto bad_cdb_len; xlat_func = atapi_xlat; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 364534e7aff..8caf9afc8b9 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -63,6 +63,9 @@ static int ali_cable_override(struct pci_dev *pdev) /* Fujitsu P2000 */ if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) return 1; + /* Mitac 8317 (Winbook-A) and relatives */ + if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) + return 1; /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; @@ -282,6 +285,21 @@ static void ali_lock_sectors(struct ata_device *adev) adev->max_sectors = 255; } +/** + * ali_check_atapi_dma - DMA check for most ALi controllers + * @adev: Device + * + * Called to decide whether commands should be sent by DMA or PIO + */ + +static int ali_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* If its not a media command, its not worth it */ + if (qc->nbytes < 2048) + return -EOPNOTSUPP; + return 0; +} + static struct scsi_host_template ali_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -378,6 +396,7 @@ static struct ata_port_operations ali_c2_port_ops = { .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, + .check_atapi_dma = ali_check_atapi_dma, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, @@ -415,6 +434,7 @@ static struct ata_port_operations ali_c5_port_ops = { .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, + .check_atapi_dma = ali_check_atapi_dma, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index b5e38426b81..81db405a544 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1145,13 +1145,13 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap) unsigned short int_status = ATAPI_GET_INT_STATUS(base); if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) { - host_stat = ATA_DMA_ACTIVE; + host_stat |= ATA_DMA_ACTIVE; } if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) { - host_stat = ATA_DMA_INTR; + host_stat |= ATA_DMA_INTR; } if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) { - host_stat = ATA_DMA_ERR; + host_stat |= ATA_DMA_ERR; } return host_stat; diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 3816b8605e0..46dc70e0dee 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -329,7 +329,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) /* Restore state */ pci_write_config_byte(pdev, 0x5B, scr2); - if (ata66 & (1 << ap->port_no)) + if (ata66 & (2 >> ap->port_no)) ap->cbl = ATA_CBL_PATA40; else ap->cbl = ATA_CBL_PATA80; diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 88ab0e1d353..4320e798632 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -75,13 +75,16 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; + int irq = 0; + irq_handler_t handler = NULL; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; - /* FIXME: Should selected polled PIO here not fail */ - if (pnp_irq_valid(idev, 0) == 0) - return -ENODEV; + if (pnp_irq_valid(idev, 0)) { + irq = pnp_irq(idev, 0); + handler = ata_interrupt; + } /* allocate host */ host = ata_host_alloc(&idev->dev, 1); @@ -115,7 +118,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev (unsigned long long)pnp_port_start(idev, 1)); /* activate */ - return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, + return ata_host_activate(host, irq, handler, 0, &isapnp_sht); } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 225a7223a72..5b8174d9406 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -80,11 +80,10 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) * actually do our cable checking etc. Thankfully we don't need * to do the plumbing for other cases. */ - switch (port_map[port]) - { + switch (port_map[port]) { case PORT_PATA0: - if (control & (1 << 5)) - return 0; + if ((control & (1 << 5)) == 0) + return -ENOENT; if (control & (1 << 3)) /* 40/80 pin primary */ ap->cbl = ATA_CBL_PATA40; else @@ -93,7 +92,7 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline) case PORT_PATA1: /* Bit 21 is set if the port is enabled */ if ((control5 & (1 << 21)) == 0) - return 0; + return -ENOENT; if (control5 & (1 << 19)) /* 40/80 pin secondary */ ap->cbl = ATA_CBL_PATA40; else diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 5c1e9cb59ec..503245a1eaf 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -33,7 +33,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sil680" -#define DRV_VERSION "0.4.7" +#define DRV_VERSION "0.4.8" #define SIL680_MMIO_BAR 5 @@ -94,34 +94,6 @@ static int sil680_cable_detect(struct ata_port *ap) { } /** - * sil680_bus_reset - reset the SIL680 bus - * @link: ATA link to reset - * @deadline: deadline jiffies for the operation - * - * Perform the SIL680 housekeeping when doing an ATA bus reset - */ - -static int sil680_bus_reset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - unsigned long addr = sil680_selreg(ap, 0); - u8 reset; - - pci_read_config_byte(pdev, addr, &reset); - pci_write_config_byte(pdev, addr, reset | 0x03); - udelay(25); - pci_write_config_byte(pdev, addr, reset); - return ata_std_softreset(link, classes, deadline); -} - -static void sil680_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset); -} - -/** * sil680_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -249,7 +221,7 @@ static struct ata_port_operations sil680_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = sil680_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = sil680_cable_detect, diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 3b5be77e861..87546d9f1ca 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -55,6 +55,7 @@ static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ /* end marker */ { 0, } }; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 187dcb02c68..96fd5260446 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -63,6 +63,21 @@ enum { SIL24_HOST_BAR = 0, SIL24_PORT_BAR = 2, + /* sil24 fetches in chunks of 64bytes. The first block + * contains the PRB and two SGEs. From the second block, it's + * consisted of four SGEs and called SGT. Calculate the + * number of SGTs that fit into one page. + */ + SIL24_PRB_SZ = sizeof(struct sil24_prb) + + 2 * sizeof(struct sil24_sge), + SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ) + / (4 * sizeof(struct sil24_sge)), + + /* This will give us one unused SGEs for ATA. This extra SGE + * will be used to store CDB for ATAPI devices. + */ + SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1, + /* * Global controller registers (128 bytes @ BAR0) */ @@ -247,13 +262,13 @@ enum { struct sil24_ata_block { struct sil24_prb prb; - struct sil24_sge sge[LIBATA_MAX_PRD]; + struct sil24_sge sge[SIL24_MAX_SGE]; }; struct sil24_atapi_block { struct sil24_prb prb; u8 cdb[16]; - struct sil24_sge sge[LIBATA_MAX_PRD - 1]; + struct sil24_sge sge[SIL24_MAX_SGE]; }; union sil24_cmd_block { @@ -378,7 +393,7 @@ static struct scsi_host_template sil24_sht = { .change_queue_depth = ata_scsi_change_queue_depth, .can_queue = SIL24_MAX_CMDS, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, + .sg_tablesize = SIL24_MAX_SGE, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, @@ -1284,6 +1299,7 @@ static void sil24_init_controller(struct ata_host *host) static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { + extern int __MARKER__sil24_cmd_block_is_sized_wrongly; static int printed_version; struct ata_port_info pi = sil24_port_info[ent->driver_data]; const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -1292,6 +1308,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) int i, rc; u32 tmp; + /* cause link error if sil24_cmd_block is sized wrongly */ + if (sizeof(union sil24_cmd_block) != PAGE_SIZE) + __MARKER__sil24_cmd_block_is_sized_wrongly = 1; + if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index d33aba6864c..3b64a99772e 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -394,6 +394,11 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) he_dev->atm_dev->dev_data = he_dev; atm_dev->dev_data = he_dev; he_dev->number = atm_dev->number; +#ifdef USE_TASKLET + tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev); +#endif + spin_lock_init(&he_dev->global_lock); + if (he_start(atm_dev)) { he_stop(he_dev); err = -ENODEV; @@ -1173,11 +1178,6 @@ he_start(struct atm_dev *dev) if ((err = he_init_irq(he_dev)) != 0) return err; -#ifdef USE_TASKLET - tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev); -#endif - spin_lock_init(&he_dev->global_lock); - /* 4.11 enable pci bus controller state machines */ host_cntl |= (OUTFF_ENB | CMDFF_ENB | QUICK_RD_RETRY | QUICK_WR_RETRY | PERR_INT_ENB); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 3cf7129d83e..924ddd8bccd 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -223,7 +223,7 @@ static int virtblk_probe(struct virtio_device *vdev) err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_CAPACITY, &cap); if (err) { dev_err(&vdev->dev, "Bad/missing capacity in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } /* If capacity is too big, truncate with warning. */ @@ -239,7 +239,7 @@ static int virtblk_probe(struct virtio_device *vdev) blk_queue_max_segment_size(vblk->disk->queue, v); else if (err != -ENOENT) { dev_err(&vdev->dev, "Bad SIZE_MAX in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } err = virtio_config_val(vdev, VIRTIO_CONFIG_BLK_F_SEG_MAX, &v); @@ -247,12 +247,14 @@ static int virtblk_probe(struct virtio_device *vdev) blk_queue_max_hw_segments(vblk->disk->queue, v); else if (err != -ENOENT) { dev_err(&vdev->dev, "Bad SEG_MAX in config\n"); - goto out_put_disk; + goto out_cleanup_queue; } add_disk(vblk->disk); return 0; +out_cleanup_queue: + blk_cleanup_queue(vblk->disk->queue); out_put_disk: put_disk(vblk->disk); out_unregister_blkdev: @@ -277,6 +279,8 @@ static void virtblk_remove(struct virtio_device *vdev) put_disk(vblk->disk); unregister_blkdev(major, "virtblk"); mempool_destroy(vblk->pool); + /* There should be nothing in the queue now, so no need to shutdown */ + vdev->config->del_vq(vblk->vq); kfree(vblk); } diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 877e53dcb99..921c6d2bc8f 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1163,7 +1163,7 @@ static struct acpi_driver sonypi_acpi_driver = { }; #endif -static int __devinit sonypi_create_input_devices(void) +static int __devinit sonypi_create_input_devices(struct platform_device *pdev) { struct input_dev *jog_dev; struct input_dev *key_dev; @@ -1177,6 +1177,7 @@ static int __devinit sonypi_create_input_devices(void) jog_dev->name = "Sony Vaio Jogdial"; jog_dev->id.bustype = BUS_ISA; jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + jog_dev->dev.parent = &pdev->dev; jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE); @@ -1191,6 +1192,7 @@ static int __devinit sonypi_create_input_devices(void) key_dev->name = "Sony Vaio Keys"; key_dev->id.bustype = BUS_ISA; key_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &pdev->dev; /* Initialize the Input Drivers: special keys */ key_dev->evbit[0] = BIT_MASK(EV_KEY); @@ -1385,7 +1387,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) if (useinput) { - error = sonypi_create_input_devices(); + error = sonypi_create_input_devices(dev); if (error) { printk(KERN_ERR "sonypi: failed to create input devices\n"); @@ -1432,7 +1434,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) { sonypi_disable(); - synchronize_sched(); /* Allow sonypi interrupt to complete. */ + synchronize_irq(sonypi_device.irq); flush_scheduled_work(); if (useinput) { diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 2316a018fae..dfa6592c10f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -286,7 +286,7 @@ config KEYBOARD_MAPLE config KEYBOARD_BFIN tristate "Blackfin BF54x keypad support" - depends on BF54x + depends on (BF54x && !BF544) help Say Y here if you want to use the BF54x keypad. diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 3eddf52a0bb..6a9ca4bdcb7 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -75,16 +75,32 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { struct gpio_keys_button *button = &pdata->buttons[i]; - int irq = gpio_to_irq(button->gpio); + int irq; unsigned int type = button->type ?: EV_KEY; + error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); + if (error < 0) { + pr_err("gpio-keys: failed to request GPIO %d," + " error %d\n", button->gpio, error); + goto fail; + } + + error = gpio_direction_input(button->gpio); + if (error < 0) { + pr_err("gpio-keys: failed to configure input" + " direction for GPIO %d, error %d\n", + button->gpio, error); + gpio_free(button->gpio); + goto fail; + } + + irq = gpio_to_irq(button->gpio); if (irq < 0) { error = irq; - printk(KERN_ERR - "gpio-keys: " - "Unable to get irq number for GPIO %d," - "error %d\n", + pr_err("gpio-keys: Unable to get irq number" + " for GPIO %d, error %d\n", button->gpio, error); + gpio_free(button->gpio); goto fail; } @@ -94,9 +110,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) button->desc ? button->desc : "gpio_keys", pdev); if (error) { - printk(KERN_ERR - "gpio-keys: Unable to claim irq %d; error %d\n", + pr_err("gpio-keys: Unable to claim irq %d; error %d\n", irq, error); + gpio_free(button->gpio); goto fail; } @@ -108,8 +124,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) error = input_register_device(input); if (error) { - printk(KERN_ERR - "gpio-keys: Unable to register input device, " + pr_err("gpio-keys: Unable to register input device, " "error: %d\n", error); goto fail; } @@ -119,8 +134,10 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) return 0; fail: - while (--i >= 0) + while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), pdev); + gpio_free(pdata->buttons[i].gpio); + } platform_set_drvdata(pdev, NULL); input_free_device(input); @@ -139,6 +156,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, pdev); + gpio_free(pdata->buttons[i].gpio); } input_unregister_device(input); diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 5ce632ca681..b88569e21d6 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -21,7 +21,7 @@ if SERIO config SERIO_I8042 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 default y - depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN + depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN ---help--- i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f8fe4214809..c5e68dcd88a 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -110,6 +110,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), }, }, + { + .ident = "Microsoft Virtual Machine", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), + DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"), + }, + }, { } }; diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index b39d1f5b378..ced83c202ca 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -2104,7 +2104,7 @@ isdn_net_find_icall(int di, int ch, int idx, setup_parm *setup) u_long flags; isdn_net_dev *p; isdn_net_phone *n; - char nr[32]; + char nr[ISDN_MSNLEN]; char *my_eaz; /* Search name in netdev-chain */ @@ -2113,7 +2113,7 @@ isdn_net_find_icall(int di, int ch, int idx, setup_parm *setup) nr[1] = '\0'; printk(KERN_INFO "isdn_net: Incoming call without OAD, assuming '0'\n"); } else - strcpy(nr, setup->phone); + strlcpy(nr, setup->phone, ISDN_MSNLEN); si1 = (int) setup->si1; si2 = (int) setup->si2; if (!setup->eazmsn[0]) { @@ -2789,7 +2789,7 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg) chidx = -1; } } - strcpy(lp->msn, cfg->eaz); + strlcpy(lp->msn, cfg->eaz, sizeof(lp->msn)); lp->pre_device = drvidx; lp->pre_channel = chidx; lp->onhtime = cfg->onhtime; @@ -2936,7 +2936,7 @@ isdn_net_addphone(isdn_net_ioctl_phone * phone) if (p) { if (!(n = kmalloc(sizeof(isdn_net_phone), GFP_KERNEL))) return -ENOMEM; - strcpy(n->num, phone->phone); + strlcpy(n->num, phone->phone, sizeof(n->num)); n->next = p->local->phone[phone->outgoing & 1]; p->local->phone[phone->outgoing & 1] = n; return 0; diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 66f38722253..e2eec38c83c 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -247,6 +247,8 @@ static void lg_del_vq(struct virtqueue *vq) { struct lguest_vq_info *lvq = vq->priv; + /* Release the interrupt */ + free_irq(lvq->config.irq, vq); /* Tell virtio_ring.c to free the virtqueue. */ vring_del_virtqueue(vq); /* Unmap the pages containing the ring. */ diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index bb13858f60a..b0f68031b49 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -338,7 +338,7 @@ static void sony_laptop_report_input_event(u8 event) dprintk("unknown input event %.2x\n", event); } -static int sony_laptop_setup_input(void) +static int sony_laptop_setup_input(struct acpi_device *acpi_device) { struct input_dev *jog_dev; struct input_dev *key_dev; @@ -379,6 +379,7 @@ static int sony_laptop_setup_input(void) key_dev->name = "Sony Vaio Keys"; key_dev->id.bustype = BUS_ISA; key_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &acpi_device->dev; /* Initialize the Input Drivers: special keys */ set_bit(EV_KEY, key_dev->evbit); @@ -410,6 +411,7 @@ static int sony_laptop_setup_input(void) jog_dev->name = "Sony Vaio Jogdial"; jog_dev->id.bustype = BUS_ISA; jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + key_dev->dev.parent = &acpi_device->dev; jog_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); jog_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_MIDDLE); @@ -1006,7 +1008,7 @@ static int sony_nc_add(struct acpi_device *device) } /* setup input devices and helper fifo */ - result = sony_laptop_setup_input(); + result = sony_laptop_setup_input(device); if (result) { printk(KERN_ERR DRV_PFX "Unabe to create input devices.\n"); @@ -1034,7 +1036,7 @@ static int sony_nc_add(struct acpi_device *device) sony_backlight_device->props.brightness = sony_backlight_get_brightness (sony_backlight_device); - sony_backlight_device->props.max_brightness = + sony_backlight_device->props.max_brightness = SONY_MAX_BRIGHTNESS - 1; } @@ -2453,7 +2455,7 @@ static int sony_pic_add(struct acpi_device *device) } /* setup input devices and helper fifo */ - result = sony_laptop_setup_input(); + result = sony_laptop_setup_input(device); if (result) { printk(KERN_ERR DRV_PFX "Unabe to create input devices.\n"); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index e953276664a..ab23a322158 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.16" +#define IBM_VERSION "0.17" #define TPACPI_SYSFS_VERSION 0x020000 /* @@ -964,15 +964,15 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ - KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x10: FN+END (brightness down) */ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - KEY_VOLUMEUP, /* 0x14: VOLUME UP */ - KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */ - KEY_MUTE, /* 0x16: MUTE */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, @@ -993,9 +993,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ - KEY_VOLUMEUP, /* 0x14: VOLUME UP */ - KEY_VOLUMEDOWN, /* 0x15: VOLUME DOWN */ - KEY_MUTE, /* 0x16: MUTE */ + KEY_RESERVED, /* 0x14: VOLUME UP */ + KEY_RESERVED, /* 0x15: VOLUME DOWN */ + KEY_RESERVED, /* 0x16: MUTE */ KEY_VENDOR, /* 0x17: Thinkpad/AccessIBM/Lenovo */ /* (assignments unknown, please report if found) */ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, @@ -1342,9 +1342,8 @@ static int hotkey_read(char *p) return len; } - res = mutex_lock_interruptible(&hotkey_mutex); - if (res < 0) - return res; + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; res = hotkey_get(&status, &mask); mutex_unlock(&hotkey_mutex); if (res) @@ -1373,9 +1372,8 @@ static int hotkey_write(char *buf) if (!tp_features.hotkey) return -ENODEV; - res = mutex_lock_interruptible(&hotkey_mutex); - if (res < 0) - return res; + if (mutex_lock_interruptible(&hotkey_mutex)) + return -ERESTARTSYS; res = hotkey_get(&status, &mask); if (res) @@ -3114,6 +3112,99 @@ static struct backlight_ops ibm_backlight_data = { static struct mutex brightness_mutex; +static int __init tpacpi_query_bcll_levels(acpi_handle handle) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + int rc; + + if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { + obj = (union acpi_object *)buffer.pointer; + if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { + printk(IBM_ERR "Unknown BCLL data, " + "please report this to %s\n", IBM_MAIL); + rc = 0; + } else { + rc = obj->package.count; + } + } else { + return 0; + } + + kfree(buffer.pointer); + return rc; +} + +static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl, + void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("BCLL", name, sizeof(name) - 1)) { + if (tpacpi_query_bcll_levels(handle) == 16) { + *rv = handle; + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } + } else { + return AE_OK; + } +} + +static int __init brightness_check_levels(void) +{ + int status; + void *found_node = NULL; + + if (!vid_handle) { + IBM_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* Search for a BCLL package with 16 levels */ + status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3, + brightness_find_bcll, NULL, &found_node); + + return (ACPI_SUCCESS(status) && found_node != NULL); +} + +static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl, + void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("_BCL", name, sizeof(name) - 1)) { + *rv = handle; + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } +} + +static int __init brightness_check_std_acpi_support(void) +{ + int status; + void *found_node = NULL; + + if (!vid_handle) { + IBM_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* Search for a _BCL method, but don't execute it */ + status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, + brightness_find_bcl, NULL, &found_node); + + return (ACPI_SUCCESS(status) && found_node != NULL); +} + static int __init brightness_init(struct ibm_init_struct *iibm) { int b; @@ -3122,6 +3213,18 @@ static int __init brightness_init(struct ibm_init_struct *iibm) mutex_init(&brightness_mutex); + if (!brightness_enable) { + dbg_printk(TPACPI_DBG_INIT, + "brightness support disabled by module parameter\n"); + return 1; + } else if (brightness_enable > 1) { + if (brightness_check_std_acpi_support()) { + printk(IBM_NOTICE + "standard ACPI backlight interface available, not loading native one...\n"); + return 1; + } + } + if (!brightness_mode) { if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) brightness_mode = 2; @@ -3135,10 +3238,17 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (brightness_mode > 3) return -EINVAL; + tp_features.bright_16levels = + thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO && + brightness_check_levels(); + b = brightness_get(NULL); if (b < 0) return 1; + if (tp_features.bright_16levels) + printk(IBM_INFO "detected a 16-level brightness capable ThinkPad\n"); + ibm_backlight_device = backlight_device_register( TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL, &ibm_backlight_data); @@ -3148,7 +3258,8 @@ static int __init brightness_init(struct ibm_init_struct *iibm) } vdbg_printk(TPACPI_DBG_INIT, "brightness is supported\n"); - ibm_backlight_device->props.max_brightness = 7; + ibm_backlight_device->props.max_brightness = + (tp_features.bright_16levels)? 15 : 7; ibm_backlight_device->props.brightness = b; backlight_update_status(ibm_backlight_device); @@ -3167,6 +3278,8 @@ static void brightness_exit(void) static int brightness_update_status(struct backlight_device *bd) { + /* it is the backlight class's job (caller) to handle + * EINTR and other errors properly */ return brightness_set( (bd->props.fb_blank == FB_BLANK_UNBLANK && bd->props.power == FB_BLANK_UNBLANK) ? @@ -3184,13 +3297,14 @@ static int brightness_get(struct backlight_device *bd) if (brightness_mode & 1) { if (!acpi_ec_read(brightness_offset, &lec)) return -EIO; - lec &= 7; + lec &= (tp_features.bright_16levels)? 0x0f : 0x07; level = lec; }; if (brightness_mode & 2) { lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) & TP_NVRAM_MASK_LEVEL_BRIGHTNESS) >> TP_NVRAM_POS_LEVEL_BRIGHTNESS; + lcmos &= (tp_features.bright_16levels)? 0x0f : 0x07; level = lcmos; } @@ -3206,12 +3320,13 @@ static int brightness_get(struct backlight_device *bd) return level; } +/* May return EINTR which can always be mapped to ERESTARTSYS */ static int brightness_set(int value) { int cmos_cmd, inc, i, res; int current_value; - if (value > 7) + if (value > ((tp_features.bright_16levels)? 15 : 7)) return -EINVAL; res = mutex_lock_interruptible(&brightness_mutex); @@ -3227,7 +3342,7 @@ static int brightness_set(int value) cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : TP_CMOS_BRIGHTNESS_DOWN; - inc = value > current_value ? 1 : -1; + inc = (value > current_value)? 1 : -1; res = 0; for (i = current_value; i != value; i += inc) { @@ -3256,10 +3371,11 @@ static int brightness_read(char *p) if ((level = brightness_get(NULL)) < 0) { len += sprintf(p + len, "level:\t\tunreadable\n"); } else { - len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); + len += sprintf(p + len, "level:\t\t%d\n", level); len += sprintf(p + len, "commands:\tup, down\n"); len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); + " (<level> is 0-%d)\n", + (tp_features.bright_16levels) ? 15 : 7); } return len; @@ -3268,28 +3384,34 @@ static int brightness_read(char *p) static int brightness_write(char *buf) { int level; - int new_level; + int rc; char *cmd; + int max_level = (tp_features.bright_16levels) ? 15 : 7; - while ((cmd = next_cmd(&buf))) { - if ((level = brightness_get(NULL)) < 0) - return level; - level &= 7; + level = brightness_get(NULL); + if (level < 0) + return level; + while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "up") == 0) { - new_level = level == 7 ? 7 : level + 1; + if (level < max_level) + level++; } else if (strlencmp(cmd, "down") == 0) { - new_level = level == 0 ? 0 : level - 1; - } else if (sscanf(cmd, "level %d", &new_level) == 1 && - new_level >= 0 && new_level <= 7) { - /* new_level set */ + if (level > 0) + level--; + } else if (sscanf(cmd, "level %d", &level) == 1 && + level >= 0 && level <= max_level) { + /* new level set */ } else return -EINVAL; - - brightness_set(new_level); } - return 0; + /* + * Now we know what the final level should be, so we try to set it. + * Doing it this way makes the syscall restartable in case of EINTR + */ + rc = brightness_set(level); + return (rc == -EINTR)? ERESTARTSYS : rc; } static struct ibm_struct brightness_driver_data = { @@ -3652,9 +3774,8 @@ static ssize_t fan_pwm1_store(struct device *dev, /* scale down from 0-255 to 0-7 */ newlevel = (s >> 5) & 0x07; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = fan_get_status(&status); if (!rc && (status & @@ -3904,9 +4025,8 @@ static int fan_get_status_safe(u8 *status) int rc; u8 s; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = fan_get_status(&s); if (!rc) fan_update_desired_level(s); @@ -4040,9 +4160,8 @@ static int fan_set_level_safe(int level) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; if (level == TPACPI_FAN_LAST_LEVEL) level = fan_control_desired_level; @@ -4063,9 +4182,8 @@ static int fan_set_enable(void) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; switch (fan_control_access_mode) { case TPACPI_FAN_WR_ACPI_FANS: @@ -4119,9 +4237,8 @@ static int fan_set_disable(void) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = 0; switch (fan_control_access_mode) { @@ -4158,9 +4275,8 @@ static int fan_set_speed(int speed) if (!fan_control_allowed) return -EPERM; - rc = mutex_lock_interruptible(&fan_mutex); - if (rc < 0) - return rc; + if (mutex_lock_interruptible(&fan_mutex)) + return -ERESTARTSYS; rc = 0; switch (fan_control_access_mode) { @@ -4701,9 +4817,15 @@ static int __init set_ibm_param(const char *val, struct kernel_param *kp) unsigned int i; struct ibm_struct *ibm; + if (!kp || !kp->name || !val) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(ibms_init); i++) { ibm = ibms_init[i].data; - BUG_ON(ibm == NULL); + WARN_ON(ibm == NULL); + + if (!ibm || !ibm->name) + continue; if (strcmp(ibm->name, kp->name) == 0 && ibm->write) { if (strlen(val) > sizeof(ibms_init[i].param) - 2) @@ -4732,6 +4854,9 @@ module_param_named(fan_control, fan_control_allowed, bool, 0); static int brightness_mode; module_param_named(brightness_mode, brightness_mode, int, 0); +static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ +module_param(brightness_enable, uint, 0); + static unsigned int hotkey_report_mode; module_param(hotkey_report_mode, uint, 0); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index 3abcc812063..8fba2bbe345 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -84,7 +84,7 @@ /* ThinkPad CMOS NVRAM constants */ #define TP_NVRAM_ADDR_BRIGHTNESS 0x5e -#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07 +#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x0f #define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0 #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") @@ -246,6 +246,7 @@ static struct { u32 hotkey_wlsw:1; u32 light:1; u32 light_status:1; + u32 bright_16levels:1; u32 wan:1; u32 fan_ctrl_status_undef:1; u32 input_device_registered:1; @@ -338,6 +339,7 @@ static int bluetooth_write(char *buf); static struct backlight_device *ibm_backlight_device; static int brightness_offset = 0x31; static int brightness_mode; +static unsigned int brightness_enable; /* 0 = no, 1 = yes, 2 = auto */ static int brightness_init(struct ibm_init_struct *iibm); static void brightness_exit(void); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e38d5a3b2a8..aeb32a93f6a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -44,6 +44,9 @@ * max 8 partitions per card */ #define MMC_SHIFT 3 +#define MMC_NUM_MINORS (256 >> MMC_SHIFT) + +static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; /* * There is one mmc_blk_data per slot. @@ -80,6 +83,9 @@ static void mmc_blk_put(struct mmc_blk_data *md) mutex_lock(&open_lock); md->usage--; if (md->usage == 0) { + int devidx = md->disk->first_minor >> MMC_SHIFT; + __clear_bit(devidx, dev_use); + put_disk(md->disk); kfree(md); } @@ -321,7 +327,13 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) req->rq_disk->disk_name, err); goto cmd_err; } - } while (!(cmd.resp[0] & R1_READY_FOR_DATA)); + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(cmd.resp[0]) == 7)); #if 0 if (cmd.resp[0] & ~0x00000900) @@ -400,9 +412,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) return 0; } -#define MMC_NUM_MINORS (256 >> MMC_SHIFT) - -static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; static inline int mmc_blk_readonly(struct mmc_card *card) { @@ -568,17 +577,12 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); if (md) { - int devidx; - /* Stop new requests from getting into the queue */ del_gendisk(md->disk); /* Then flush out any already in there */ mmc_cleanup_queue(&md->queue); - devidx = md->disk->first_minor >> MMC_SHIFT; - __clear_bit(devidx, dev_use); - mmc_blk_put(md); } mmc_set_drvdata(card, NULL); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index c11a3d25605..20d5c7bd940 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -16,7 +16,6 @@ #include <linux/mmc/host.h> #include <linux/highmem.h> #include <linux/scatterlist.h> -#include <linux/log2.h> #include <asm/io.h> #define DRIVER_NAME "tifm_sd" @@ -638,17 +637,15 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) goto err_out; } - if (mrq->data && !is_power_of_2(mrq->data->blksz)) { - printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n", - sock->dev.bus_id, mrq->data->blksz); - mrq->cmd->error = -EINVAL; - goto err_out; - } - host->cmd_flags = 0; host->block_pos = 0; host->sg_pos = 0; + if (mrq->data && !is_power_of_2(mrq->data->blksz)) + host->no_dma = 1; + else + host->no_dma = no_dma ? 1 : 0; + if (r_data) { tifm_sd_set_data_timeout(host, r_data); @@ -676,7 +673,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) : PCI_DMA_FROMDEVICE)) { printk(KERN_ERR "%s : scatterlist map failed\n", sock->dev.bus_id); - spin_unlock_irqrestore(&sock->lock, flags); + mrq->cmd->error = -ENOMEM; goto err_out; } host->sg_len = tifm_map_sg(sock, r_data->sg, @@ -692,7 +689,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) r_data->flags & MMC_DATA_WRITE ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); - spin_unlock_irqrestore(&sock->lock, flags); + mrq->cmd->error = -ENOMEM; goto err_out; } @@ -966,7 +963,6 @@ static int tifm_sd_probe(struct tifm_dev *sock) return -ENOMEM; host = mmc_priv(mmc); - host->no_dma = no_dma; tifm_set_drvdata(sock, mmc); host->dev = sock; host->timeout_jiffies = msecs_to_jiffies(1000); diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 084acfd6fc5..0b99b554929 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -924,7 +924,7 @@ static int __init bf537mac_probe(struct net_device *dev) if (!is_valid_ether_addr(dev->dev_addr)) { /* Grab the MAC from the board somehow - this is done in the arch/blackfin/mach-bf537/boards/eth_mac.c */ - get_bf537_ether_addr(dev->dev_addr); + bfin_get_ether_addr(dev->dev_addr); } /* If still not valid, get a random one */ diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h index 3a107ad7538..5970ea7142c 100644 --- a/drivers/net/bfin_mac.h +++ b/drivers/net/bfin_mac.h @@ -92,4 +92,4 @@ struct bf537mac_local { struct mii_bus mii_bus; }; -extern void get_bf537_ether_addr(char *addr); +extern void bfin_get_ether_addr(char *addr); diff --git a/drivers/net/plip.c b/drivers/net/plip.c index 5071fcd8a0b..57c98669984 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip.c @@ -663,7 +663,7 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl, case PLIP_PK_DONE: /* Inform the upper layer for the arrival of a packet. */ rcv->skb->protocol=plip_type_trans(rcv->skb, dev); - netif_rx(rcv->skb); + netif_rx_ni(rcv->skb); dev->last_rx = jiffies; dev->stats.rx_bytes += rcv->length.h; dev->stats.rx_packets++; @@ -1269,7 +1269,7 @@ static void plip_attach (struct parport *port) nl = netdev_priv(dev); nl->dev = dev; - nl->pardev = parport_register_device(port, name, plip_preempt, + nl->pardev = parport_register_device(port, dev->name, plip_preempt, plip_wakeup, plip_interrupt, 0, dev); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index a75be57fb20..5413dbf3d4a 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -198,8 +198,8 @@ again: if (vi->num < vi->max / 2) try_fill_recv(vi); - /* All done? */ - if (!skb) { + /* Out of packets? */ + if (received < budget) { netif_rx_complete(vi->dev, napi); if (unlikely(!vi->rvq->vq_ops->restart(vi->rvq)) && netif_rx_reschedule(vi->dev, napi)) @@ -404,8 +404,12 @@ free: static void virtnet_remove(struct virtio_device *vdev) { - unregister_netdev(vdev->priv); - free_netdev(vdev->priv); + struct virtnet_info *vi = vdev->priv; + + vdev->config->del_vq(vi->svq); + vdev->config->del_vq(vi->rvq); + unregister_netdev(vi->dev); + free_netdev(vi->dev); } static struct virtio_device_id id_table[] = { diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 277a020b35e..50775f9234c 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1032,7 +1032,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, } static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - int maxpacket, struct sk_buff *skb) + struct sk_buff *skb) { int length; @@ -1041,7 +1041,7 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * but it must _not_ be a multiple of the USB packet size. */ length = roundup(skb->len, 2); - length += (2 * !(length % maxpacket)); + length += (2 * !(length % rt2x00dev->usb_maxpacket)); return length; } @@ -1643,7 +1643,6 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, struct data_entry *beacon; struct data_entry *guardian; int pipe = usb_sndbulkpipe(usb_dev, 1); - int max_packet = usb_maxpacket(usb_dev, pipe, 1); int length; /* @@ -1672,7 +1671,7 @@ static int rt2500usb_beacon_update(struct ieee80211_hw *hw, ring->desc_size), skb->len - ring->desc_size, control); - length = rt2500usb_get_tx_data_len(rt2x00dev, max_packet, skb); + length = rt2500usb_get_tx_data_len(rt2x00dev, skb); usb_fill_bulk_urb(beacon->priv, usb_dev, pipe, skb->data, length, rt2500usb_beacondone, beacon); diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index d1ad5251a77..c8f16f161c2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -418,7 +418,7 @@ struct rt2x00lib_ops { int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, struct data_ring *ring, struct sk_buff *skb, struct ieee80211_tx_control *control); - int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, int maxpacket, + int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, unsigned int queue); @@ -599,6 +599,11 @@ struct rt2x00_dev { u32 *rf; /* + * USB Max frame size (for rt2500usb & rt73usb). + */ + u16 usb_maxpacket; + + /* * Current TX power value. */ u16 tx_power; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 73cc726c404..1f5675dd329 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -159,7 +159,6 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); struct data_entry *entry = rt2x00_get_data_entry(ring); int pipe = usb_sndbulkpipe(usb_dev, 1); - int max_packet = usb_maxpacket(usb_dev, pipe, 1); u32 length; if (rt2x00_ring_full(ring)) { @@ -194,8 +193,7 @@ int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, - max_packet, skb); + length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb); /* * Initialize URB and send the frame to the device. @@ -490,6 +488,11 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->ops = ops; rt2x00dev->hw = hw; + rt2x00dev->usb_maxpacket = + usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); + if (!rt2x00dev->usb_maxpacket) + rt2x00dev->usb_maxpacket = 1; + retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index dc640bf6b5e..c0671c2e6e7 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1251,7 +1251,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, } static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - int maxpacket, struct sk_buff *skb) + struct sk_buff *skb) { int length; @@ -1260,7 +1260,7 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * but it must _not_ be a multiple of the USB packet size. */ length = roundup(skb->len, 4); - length += (4 * !(length % maxpacket)); + length += (4 * !(length % rt2x00dev->usb_maxpacket)); return length; } diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index cd0a204d96d..11adab13f2b 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -75,6 +75,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res, { int i = 0; int irq; + int p, t; if (!valid_IRQ(gsi)) return; @@ -85,15 +86,22 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res, if (i >= PNP_MAX_IRQ) return; -#ifdef CONFIG_X86 - if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE || - polarity != ACPI_ACTIVE_HIGH)) { - pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, " - "active high", gsi); - triggering = ACPI_EDGE_SENSITIVE; - polarity = ACPI_ACTIVE_HIGH; + /* + * in IO-APIC mode, use overrided attribute. Two reasons: + * 1. BIOS bug in DSDT + * 2. BIOS uses IO-APIC mode Interrupt Source Override + */ + if (!acpi_get_override_irq(gsi, &t, &p)) { + t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; + p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; + + if (triggering != t || polarity != p) { + pnp_warn("IRQ %d override to %s, %s", + gsi, t ? "edge":"level", p ? "low":"high"); + triggering = t; + polarity = p; + } } -#endif res->irq_resource[i].flags = IORESOURCE_IRQ; // Also clears _UNSET flag res->irq_resource[i].flags |= irq_flags(triggering, polarity); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e5cdc0294aa..1e6715ec51e 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -447,7 +447,7 @@ config RTC_DRV_AT91RM9200 config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" - depends on BFIN + depends on BLACKFIN help If you say yes here you will get support for the Blackfin On-Chip Real Time Clock. diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 838f7ac0dc3..6db31089d2d 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -483,7 +483,7 @@ static DECLARE_WORK(css_reprobe_work, reprobe_all); void css_schedule_reprobe(void) { need_reprobe = 1; - queue_work(ccw_device_work, &css_reprobe_work); + queue_work(slow_path_wq, &css_reprobe_work); } EXPORT_SYMBOL_GPL(css_schedule_reprobe); diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 8867443b806..bfad421cda6 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -1034,7 +1034,7 @@ device_trigger_reprobe(struct subchannel *sch) if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) { PREPARE_WORK(&cdev->private->kick_work, ccw_device_move_to_orphanage); - queue_work(ccw_device_work, &cdev->private->kick_work); + queue_work(slow_path_wq, &cdev->private->kick_work); } else ccw_device_start_id(cdev, 0); } diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c index f232832f2b2..2f6bf462425 100644 --- a/drivers/s390/cio/device_id.c +++ b/drivers/s390/cio/device_id.c @@ -113,19 +113,10 @@ __ccw_device_sense_id_start(struct ccw_device *cdev) { struct subchannel *sch; struct ccw1 *ccw; - int ret; sch = to_subchannel(cdev->dev.parent); /* Setup sense channel program. */ ccw = cdev->private->iccws; - if (sch->schib.pmcw.pim != 0x80) { - /* more than one path installed. */ - ccw->cmd_code = CCW_CMD_SUSPEND_RECONN; - ccw->cda = 0; - ccw->count = 0; - ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC; - ccw++; - } ccw->cmd_code = CCW_CMD_SENSE_ID; ccw->cda = (__u32) __pa (&cdev->private->senseid); ccw->count = sizeof (struct senseid); @@ -133,25 +124,9 @@ __ccw_device_sense_id_start(struct ccw_device *cdev) /* Reset device status. */ memset(&cdev->private->irb, 0, sizeof(struct irb)); + cdev->private->flags.intretry = 0; - /* Try on every path. */ - ret = -ENODEV; - while (cdev->private->imask != 0) { - if ((sch->opm & cdev->private->imask) != 0 && - cdev->private->iretry > 0) { - cdev->private->iretry--; - /* Reset internal retry indication. */ - cdev->private->flags.intretry = 0; - ret = cio_start (sch, cdev->private->iccws, - cdev->private->imask); - /* ret is 0, -EBUSY, -EACCES or -ENODEV */ - if (ret != -EACCES) - return ret; - } - cdev->private->imask >>= 1; - cdev->private->iretry = 5; - } - return ret; + return cio_start(sch, ccw, LPM_ANYPATH); } void @@ -161,8 +136,7 @@ ccw_device_sense_id_start(struct ccw_device *cdev) memset (&cdev->private->senseid, 0, sizeof (struct senseid)); cdev->private->senseid.cu_type = 0xFFFF; - cdev->private->imask = 0x80; - cdev->private->iretry = 5; + cdev->private->iretry = 3; ret = __ccw_device_sense_id_start(cdev); if (ret && ret != -EBUSY) ccw_device_sense_id_done(cdev, ret); @@ -278,14 +252,13 @@ ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event) ccw_device_sense_id_done(cdev, ret); break; case -EACCES: /* channel is not operational. */ - sch->lpm &= ~cdev->private->imask; - cdev->private->imask >>= 1; - cdev->private->iretry = 5; - /* fall through. */ case -EAGAIN: /* try again. */ - ret = __ccw_device_sense_id_start(cdev); - if (ret == 0 || ret == -EBUSY) - break; + cdev->private->iretry--; + if (cdev->private->iretry > 0) { + ret = __ccw_device_sense_id_start(cdev); + if (ret == 0 || ret == -EBUSY) + break; + } /* fall through. */ default: /* Sense ID failed. Try asking VM. */ if (MACHINE_IS_VM) { diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ed438bc7e98..d7e1996e2fe 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -600,7 +600,7 @@ config SERIAL_SA1100_CONSOLE config SERIAL_BFIN tristate "Blackfin serial port support" - depends on BFIN + depends on BLACKFIN select SERIAL_CORE select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) help diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a77ede598d3..abf05048c63 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -61,7 +61,7 @@ config SPI_ATMEL config SPI_BFIN tristate "SPI controller driver for ADI Blackfin5xx" - depends on SPI_MASTER && BFIN + depends on SPI_MASTER && BLACKFIN help This is the SPI controller master driver for Blackfin 5xx processor. diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 1e32b3d13f2..62867cb63fe 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -202,6 +202,7 @@ static struct pci_device_id radeonfb_pci_table[] = { CHIP_DEF(PCI_CHIP_RV380_3154, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), CHIP_DEF(PCI_CHIP_RV370_5B60, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B62, RV380, CHIP_HAS_CRTC2), + CHIP_DEF(PCI_CHIP_RV370_5B63, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B64, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5B65, RV380, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV370_5460, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 267422f6625..b87ed37ac0c 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN default y help Saying Y here will allow you to use Linux in text mode through a diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 15d7787dea8..69d7ea02cd4 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -96,10 +96,23 @@ static int virtio_dev_probe(struct device *_d) return err; } +static int virtio_dev_remove(struct device *_d) +{ + struct virtio_device *dev = container_of(_d,struct virtio_device,dev); + struct virtio_driver *drv = container_of(dev->dev.driver, + struct virtio_driver, driver); + + dev->config->set_status(dev, dev->config->get_status(dev) + & ~VIRTIO_CONFIG_S_DRIVER); + drv->remove(dev); + return 0; +} + int register_virtio_driver(struct virtio_driver *driver) { driver->driver.bus = &virtio_bus; driver->driver.probe = virtio_dev_probe; + driver->driver.remove = virtio_dev_remove; return driver_register(&driver->driver); } EXPORT_SYMBOL_GPL(register_virtio_driver); diff --git a/drivers/zorro/zorro-driver.c b/drivers/zorro/zorro-driver.c index 067c07be928..e6c4390d8bd 100644 --- a/drivers/zorro/zorro-driver.c +++ b/drivers/zorro/zorro-driver.c @@ -60,6 +60,20 @@ static int zorro_device_probe(struct device *dev) } +static int zorro_device_remove(struct device *dev) +{ + struct zorro_dev *z = to_zorro_dev(dev); + struct zorro_driver *drv = to_zorro_driver(dev->driver); + + if (drv) { + if (drv->remove) + drv->remove(z); + z->driver = NULL; + } + return 0; +} + + /** * zorro_register_driver - register a new Zorro driver * @drv: the driver structure to register @@ -128,6 +142,7 @@ struct bus_type zorro_bus_type = { .name = "zorro", .match = zorro_bus_match, .probe = zorro_device_probe, + .remove = zorro_device_remove, }; |