aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-floppy.c50
-rw-r--r--drivers/ide/ide-tape.c59
2 files changed, 0 insertions, 109 deletions
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index ff8232ef965..cf48b4a46d6 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1658,7 +1658,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
{
struct idefloppy_id_gcw gcw;
#if IDEFLOPPY_DEBUG_INFO
- u16 mask,i;
char buffer[80];
#endif /* IDEFLOPPY_DEBUG_INFO */
@@ -1705,55 +1704,6 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
default: sprintf(buffer, "Reserved");break;
}
printk(KERN_INFO "Command Packet Size: %s\n", buffer);
- printk(KERN_INFO "Model: %.40s\n",id->model);
- printk(KERN_INFO "Firmware Revision: %.8s\n",id->fw_rev);
- printk(KERN_INFO "Serial Number: %.20s\n",id->serial_no);
- printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
- printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
- printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
- printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
- printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
- printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
- printk(KERN_INFO "Single Word DMA supported modes:\n");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_1word & mask)
- printk(KERN_INFO " Mode %d%s\n", i,
- (id->dma_1word & (mask << 8)) ? " (active)" : "");
- }
- printk(KERN_INFO "Multi Word DMA supported modes:\n");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_mword & mask)
- printk(KERN_INFO " Mode %d%s\n", i,
- (id->dma_mword & (mask << 8)) ? " (active)" : "");
- }
- if (id->field_valid & 0x0002) {
- printk(KERN_INFO "Enhanced PIO Modes: %s\n",
- id->eide_pio_modes & 1 ? "Mode 3":"None");
- if (id->eide_dma_min == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_dma_min);
- printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
- if (id->eide_dma_time == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_dma_time);
- printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
- if (id->eide_pio == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_pio);
- printk(KERN_INFO "Minimum PIO cycle without IORDY: %s\n",
- buffer);
- if (id->eide_pio_iordy == 0)
- sprintf(buffer, "Not supported");
- else
- sprintf(buffer, "%d ns",id->eide_pio_iordy);
- printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
- } else
- printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
#endif /* IDEFLOPPY_DEBUG_INFO */
if (gcw.protocol != 2)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d71a584f076..65037a8295a 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -4291,9 +4291,6 @@ static int idetape_identify_device (ide_drive_t *drive)
{
struct idetape_id_gcw gcw;
struct hd_driveid *id = drive->id;
-#if IDETAPE_DEBUG_INFO
- unsigned short mask,i;
-#endif /* IDETAPE_DEBUG_INFO */
if (drive->id_read == 0)
return 1;
@@ -4333,62 +4330,6 @@ static int idetape_identify_device (ide_drive_t *drive)
case 1: printk("16 bytes\n");break;
default: printk("Reserved\n");break;
}
- printk(KERN_INFO "ide-tape: Model: %.40s\n",id->model);
- printk(KERN_INFO "ide-tape: Firmware Revision: %.8s\n",id->fw_rev);
- printk(KERN_INFO "ide-tape: Serial Number: %.20s\n",id->serial_no);
- printk(KERN_INFO "ide-tape: Write buffer size: %d bytes\n",id->buf_size*512);
- printk(KERN_INFO "ide-tape: DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
- printk(KERN_INFO "ide-tape: ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
- printk(KERN_INFO "ide-tape: PIO Cycle Timing Category: %d\n",id->tPIO);
- printk(KERN_INFO "ide-tape: DMA Cycle Timing Category: %d\n",id->tDMA);
- printk(KERN_INFO "ide-tape: Single Word DMA supported modes: ");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_1word & mask)
- printk("%d ",i);
- if (id->dma_1word & (mask << 8))
- printk("(active) ");
- }
- printk("\n");
- printk(KERN_INFO "ide-tape: Multi Word DMA supported modes: ");
- for (i=0,mask=1;i<8;i++,mask=mask << 1) {
- if (id->dma_mword & mask)
- printk("%d ",i);
- if (id->dma_mword & (mask << 8))
- printk("(active) ");
- }
- printk("\n");
- if (id->field_valid & 0x0002) {
- printk(KERN_INFO "ide-tape: Enhanced PIO Modes: %s\n",
- id->eide_pio_modes & 1 ? "Mode 3":"None");
- printk(KERN_INFO "ide-tape: Minimum Multi-word DMA cycle per word: ");
- if (id->eide_dma_min == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_dma_min);
-
- printk(KERN_INFO "ide-tape: Manufacturer\'s Recommended Multi-word cycle: ");
- if (id->eide_dma_time == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_dma_time);
-
- printk(KERN_INFO "ide-tape: Minimum PIO cycle without IORDY: ");
- if (id->eide_pio == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_pio);
-
- printk(KERN_INFO "ide-tape: Minimum PIO cycle with IORDY: ");
- if (id->eide_pio_iordy == 0)
- printk("Not supported\n");
- else
- printk("%d ns\n",id->eide_pio_iordy);
-
- } else
- printk(KERN_INFO "ide-tape: According to the device, fields 64-70 are not valid.\n");
#endif /* IDETAPE_DEBUG_INFO */
/* Check that we can support this device */