aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/edac/Kconfig8
-rw-r--r--drivers/edac/Makefile2
-rw-r--r--drivers/edac/amd8111_edac.c4
-rw-r--r--drivers/edac/amd8131_edac.c2
-rw-r--r--drivers/md/raid5.c6
-rw-r--r--drivers/parport/parport_gsc.c4
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/serial/8250_gsc.c4
-rw-r--r--drivers/serial/mpc52xx_uart.c2
-rw-r--r--drivers/video/atmel_lcdfb.c10
-rw-r--r--drivers/video/s3c-fb.c12
11 files changed, 47 insertions, 22 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e5f5c5a8ba6..956982f8739 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -192,16 +192,20 @@ config EDAC_PPC4XX
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index a5fdcf02f59..59076819135 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -35,3 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
index 61469218112..2cb58ef743e 100644
--- a/drivers/edac/amd8111_edac.c
+++ b/drivers/edac/amd8111_edac.c
@@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev,
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = dev_info->check;
@@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev,
pci_info->edac_dev->dev = &pci_info->dev->dev;
pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+ pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
pci_info->edac_dev->edac_check = pci_info->check;
diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c
index c083b31cac5..b432d60c622 100644
--- a/drivers/edac/amd8131_edac.c
+++ b/drivers/edac/amd8131_edac.c
@@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = amd8131_chipset.check;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3c3626d2a1f..5d400aef8d9 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->delta_disks < 0) {
- writepos -= min(reshape_sectors, writepos);
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
readpos += reshape_sectors;
safepos += reshape_sectors;
} else {
writepos += reshape_sectors;
- readpos -= min(reshape_sectors, readpos);
- safepos -= min(reshape_sectors, safepos);
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
}
/* 'writepos' is the most advanced device address we might write.
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index e6a7e847ee8..ea31a452b15 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
- dev->hpa.start);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b39811b44..a0127e93ade 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@ struct uart_8250_port {
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
@@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
@@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port)
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
@@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe9a0a..33149d982e8 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8ceaa6..b3feb6198d5 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options)
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 9a577a800db..2fb63f6ea2f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -29,14 +29,8 @@
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
- defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE 2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE 512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
+#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5e9c6302433..d3a568e6b16 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
int win;
for (win = 0; win <= S3C_FB_MAX_WIN; win++)
- s3c_fb_release_win(sfb, sfb->windows[win]);
+ if (sfb->windows[win])
+ s3c_fb_release_win(sfb, sfb->windows[win]);
iounmap(sfb->regs);
@@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
static int s3c_fb_resume(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
+ struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
clk_enable(sfb->bus_clk);
+ /* setup registers */
+ writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+ /* zero all windows before we do anything */
+ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ s3c_fb_clear_win(sfb, win_no);
+
+ /* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 18:53:05 +0000