aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c387
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.h42
2 files changed, 25 insertions, 404 deletions
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index c9ec0b3e582..484de6e9766 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -24,7 +24,6 @@
*
*/
-#undef DEBUG
// #define VERBOSE DBG_VERBOSE
#include <linux/device.h>
@@ -75,9 +74,17 @@
* it constrains the sorts of USB configuration change events that work.
* The errata for these chips are misleading; some "fixed" bugs from
* pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
+ *
+ * Note that the UDC hardware supports DMA (except on IXP) but that's
+ * not used here. IN-DMA (to host) is simple enough, when the data is
+ * suitably aligned (16 bytes) ... the network stack doesn't do that,
+ * other software can. OUT-DMA is buggy in most chip versions, as well
+ * as poorly designed (data toggle not automatic). So this driver won't
+ * bother using DMA. (Mostly-working IN-DMA support was available in
+ * kernels before 2.6.23, but was never enabled or well tested.)
*/
-#define DRIVER_VERSION "4-May-2005"
+#define DRIVER_VERSION "30-June-2007"
#define DRIVER_DESC "PXA 25x USB Device Controller driver"
@@ -86,12 +93,9 @@ static const char driver_name [] = "pxa2xx_udc";
static const char ep0name [] = "ep0";
-// #define USE_DMA
-// #define USE_OUT_DMA
// #define DISABLE_TEST_MODE
#ifdef CONFIG_ARCH_IXP4XX
-#undef USE_DMA
/* cpu-specific register addresses are compiled in to this code */
#ifdef CONFIG_ARCH_PXA
@@ -103,25 +107,6 @@ static const char ep0name [] = "ep0";
#include "pxa2xx_udc.h"
-#ifdef USE_DMA
-static int use_dma = 1;
-module_param(use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "true to use dma");
-
-static void dma_nodesc_handler (int dmach, void *_ep);
-static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
-
-#ifdef USE_OUT_DMA
-#define DMASTR " (dma support)"
-#else
-#define DMASTR " (dma in)"
-#endif
-
-#else /* !USE_DMA */
-#define DMASTR " (pio only)"
-#undef USE_OUT_DMA
-#endif
-
#ifdef CONFIG_USB_PXA2XX_SMALL
#define SIZE_STR " (small)"
#else
@@ -280,9 +265,8 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
}
ep->desc = desc;
- ep->dma = -1;
ep->stopped = 0;
- ep->pio_irqs = ep->dma_irqs = 0;
+ ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
/* flush fifo (mostly for OUT buffers) */
@@ -290,30 +274,6 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
/* ... reset halt state too, if we could ... */
-#ifdef USE_DMA
- /* for (some) bulk and ISO endpoints, try to get a DMA channel and
- * bind it to the endpoint. otherwise use PIO.
- */
- switch (ep->bmAttributes) {
- case USB_ENDPOINT_XFER_ISOC:
- if (le16_to_cpu(desc->wMaxPacketSize) % 32)
- break;
- // fall through
- case USB_ENDPOINT_XFER_BULK:
- if (!use_dma || !ep->reg_drcmr)
- break;
- ep->dma = pxa_request_dma ((char *)_ep->name,
- (le16_to_cpu (desc->wMaxPacketSize) > 64)
- ? DMA_PRIO_MEDIUM /* some iso */
- : DMA_PRIO_LOW,
- dma_nodesc_handler, ep);
- if (ep->dma >= 0) {
- *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
- DMSG("%s using dma%d\n", _ep->name, ep->dma);
- }
- }
-#endif
-
DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
return 0;
}
@@ -333,14 +293,6 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
nuke (ep, -ESHUTDOWN);
-#ifdef USE_DMA
- if (ep->dma >= 0) {
- *ep->reg_drcmr = 0;
- pxa_free_dma (ep->dma);
- ep->dma = -1;
- }
-#endif
-
/* flush fifo (mostly for IN buffers) */
pxa2xx_ep_fifo_flush (_ep);
@@ -390,11 +342,6 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
}
-/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
- * no device-affinity and the heap works perfectly well for i/o buffers.
- * It wastes much less memory than dma_alloc_coherent() would, and even
- * prevents cacheline (32 bytes wide) sharing problems.
- */
static void *
pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
dma_addr_t *dma, gfp_t gfp_flags)
@@ -403,11 +350,7 @@ pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
if (retval)
-#ifdef USE_DMA
- *dma = virt_to_bus (retval);
-#else
*dma = (dma_addr_t)~0;
-#endif
return retval;
}
@@ -517,18 +460,8 @@ write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
/* requests complete when all IN data is in the FIFO */
if (is_last) {
done (ep, req, 0);
- if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
+ if (list_empty(&ep->queue))
pio_irq_disable (ep->bEndpointAddress);
-#ifdef USE_DMA
- /* unaligned data and zlps couldn't use dma */
- if (unlikely(!list_empty(&ep->queue))) {
- req = list_entry(ep->queue.next,
- struct pxa2xx_request, queue);
- kick_dma(ep,req);
- return 0;
- }
-#endif
- }
return 1;
}
@@ -727,182 +660,6 @@ read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
return 0;
}
-#ifdef USE_DMA
-
-#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
-
-static void
-start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in)
-{
- u32 dcmd = req->req.length;
- u32 buf = req->req.dma;
- u32 fifo = io_v2p ((u32)ep->reg_uddr);
-
- /* caller guarantees there's a packet or more remaining
- * - IN may end with a short packet (TSP set separately),
- * - OUT is always full length
- */
- buf += req->req.actual;
- dcmd -= req->req.actual;
- ep->dma_fixup = 0;
-
- /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
- DCSR(ep->dma) = DCSR_NODESC;
- if (is_in) {
- DSADR(ep->dma) = buf;
- DTADR(ep->dma) = fifo;
- if (dcmd > MAX_IN_DMA)
- dcmd = MAX_IN_DMA;
- else
- ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0;
- dcmd |= DCMD_BURST32 | DCMD_WIDTH1
- | DCMD_FLOWTRG | DCMD_INCSRCADDR;
- } else {
-#ifdef USE_OUT_DMA
- DSADR(ep->dma) = fifo;
- DTADR(ep->dma) = buf;
- if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
- dcmd = ep->ep.maxpacket;
- dcmd |= DCMD_BURST32 | DCMD_WIDTH1
- | DCMD_FLOWSRC | DCMD_INCTRGADDR;
-#endif
- }
- DCMD(ep->dma) = dcmd;
- DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC
- | (unlikely(is_in)
- ? DCSR_STOPIRQEN /* use dma_nodesc_handler() */
- : 0); /* use handle_ep() */
-}
-
-static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req)
-{
- int is_in = ep->bEndpointAddress & USB_DIR_IN;
-
- if (is_in) {
- /* unaligned tx buffers and zlps only work with PIO */
- if ((req->req.dma & 0x0f) != 0
- || unlikely((req->req.length - req->req.actual)
- == 0)) {
- pio_irq_enable(ep->bEndpointAddress);
- if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0)
- (void) write_fifo(ep, req);
- } else {
- start_dma_nodesc(ep, req, USB_DIR_IN);
- }
- } else {
- if ((req->req.length - req->req.actual) < ep->ep.maxpacket) {
- DMSG("%s short dma read...\n", ep->ep.name);
- /* we're always set up for pio out */
- read_fifo (ep, req);
- } else {
- *ep->reg_udccs = UDCCS_BO_DME
- | (*ep->reg_udccs & UDCCS_BO_FST);
- start_dma_nodesc(ep, req, USB_DIR_OUT);
- }
- }
-}
-
-static void cancel_dma(struct pxa2xx_ep *ep)
-{
- struct pxa2xx_request *req;
- u32 tmp;
-
- if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
- return;
-
- DCSR(ep->dma) = 0;
- while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
- cpu_relax();
-
- req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
- tmp = DCMD(ep->dma) & DCMD_LENGTH;
- req->req.actual = req->req.length - (tmp & DCMD_LENGTH);
-
- /* the last tx packet may be incomplete, so flush the fifo.
- * FIXME correct req.actual if we can
- */
- if (ep->bEndpointAddress & USB_DIR_IN)
- *ep->reg_udccs = UDCCS_BI_FTF;
-}
-
-/* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
-static void dma_nodesc_handler(int dmach, void *_ep)
-{
- struct pxa2xx_ep *ep = _ep;
- struct pxa2xx_request *req;
- u32 tmp, completed;
-
- local_irq_disable();
-
- req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
-
- ep->dma_irqs++;
- ep->dev->stats.irqs++;
- HEX_DISPLAY(ep->dev->stats.irqs);
-
- /* ack/clear */
- tmp = DCSR(ep->dma);
- DCSR(ep->dma) = tmp;
- if ((tmp & DCSR_STOPSTATE) == 0
- || (DDADR(ep->dma) & DDADR_STOP) != 0) {
- DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n",
- ep->ep.name, DCSR(ep->dma), DDADR(ep->dma));
- goto done;
- }
- DCSR(ep->dma) = 0; /* clear DCSR_STOPSTATE */
-
- /* update transfer status */
- completed = tmp & DCSR_BUSERR;
- if (ep->bEndpointAddress & USB_DIR_IN)
- tmp = DSADR(ep->dma);
- else
- tmp = DTADR(ep->dma);
- req->req.actual = tmp - req->req.dma;
-
- /* FIXME seems we sometimes see partial transfers... */
-
- if (unlikely(completed != 0))
- req->req.status = -EIO;
- else if (req->req.actual) {
- /* these registers have zeroes in low bits; they miscount
- * some (end-of-transfer) short packets: tx 14 as tx 12
- */
- if (ep->dma_fixup)
- req->req.actual = min(req->req.actual + 3,
- req->req.length);
-
- tmp = (req->req.length - req->req.actual);
- completed = (tmp == 0);
- if (completed && (ep->bEndpointAddress & USB_DIR_IN)) {
-
- /* maybe validate final short packet ... */
- if ((req->req.actual % ep->ep.maxpacket) != 0)
- *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/;
-
- /* ... or zlp, using pio fallback */
- else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK
- && req->req.zero) {
- DMSG("%s zlp terminate ...\n", ep->ep.name);
- completed = 0;
- }
- }
- }
-
- if (likely(completed)) {
- done(ep, req, 0);
-
- /* maybe re-activate after completion */
- if (ep->stopped || list_empty(&ep->queue))
- goto done;
- req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
- }
- kick_dma(ep, req);
-done:
- local_irq_enable();
-}
-
-#endif
-
/*-------------------------------------------------------------------------*/
static int
@@ -941,19 +698,8 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
(ep->desc->wMaxPacketSize)))
return -EMSGSIZE;
-#ifdef USE_DMA
- // FIXME caller may already have done the dma mapping
- if (ep->dma >= 0) {
- _req->dma = dma_map_single(dev->dev,
- _req->buf, _req->length,
- ((ep->bEndpointAddress & USB_DIR_IN) != 0)
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
-#endif
-
DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
- _ep->name, _req, _req->length, _req->buf);
+ _ep->name, _req, _req->length, _req->buf);
local_irq_save(flags);
@@ -1001,11 +747,6 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
local_irq_restore (flags);
return -EL2HLT;
}
-#ifdef USE_DMA
- /* either start dma or prime pio pump */
- } else if (ep->dma >= 0) {
- kick_dma(ep, req);
-#endif
/* can the FIFO can satisfy the request immediately? */
} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
@@ -1016,7 +757,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
req = NULL;
}
- if (likely (req && ep->desc) && ep->dma < 0)
+ if (likely (req && ep->desc))
pio_irq_enable(ep->bEndpointAddress);
}
@@ -1037,10 +778,6 @@ static void nuke(struct pxa2xx_ep *ep, int status)
struct pxa2xx_request *req;
/* called with irqs blocked */
-#ifdef USE_DMA
- if (ep->dma >= 0 && !ep->stopped)
- cancel_dma(ep);
-#endif
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next,
struct pxa2xx_request,
@@ -1075,19 +812,7 @@ static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
return -EINVAL;
}
-#ifdef USE_DMA
- if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
- cancel_dma(ep);
- done(ep, req, -ECONNRESET);
- /* restart i/o */
- if (!list_empty(&ep->queue)) {
- req = list_entry(ep->queue.next,
- struct pxa2xx_request, queue);
- kick_dma(ep, req);
- }
- } else
-#endif
- done(ep, req, -ECONNRESET);
+ done(ep, req, -ECONNRESET);
local_irq_restore(flags);
return 0;
@@ -1324,7 +1049,7 @@ udc_proc_read(char *page, char **start, off_t off, int count,
/* basic device status */
t = scnprintf(next, size, DRIVER_DESC "\n"
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
- driver_name, DRIVER_VERSION SIZE_STR DMASTR,
+ driver_name, DRIVER_VERSION SIZE_STR "(pio)",
dev->driver ? dev->driver->driver.name : "(none)",
is_vbus_present() ? "full speed" : "disconnected");
size -= t;
@@ -1389,7 +1114,6 @@ udc_proc_read(char *page, char **start, off_t off, int count,
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
struct pxa2xx_ep *ep = &dev->ep [i];
struct pxa2xx_request *req;
- int t;
if (i != 0) {
const struct usb_endpoint_descriptor *d;
@@ -1399,10 +1123,9 @@ udc_proc_read(char *page, char **start, off_t off, int count,
continue;
tmp = *dev->ep [i].reg_udccs;
t = scnprintf(next, size,
- "%s max %d %s udccs %02x irqs %lu/%lu\n",
+ "%s max %d %s udccs %02x irqs %lu\n",
ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
- (ep->dma >= 0) ? "dma" : "pio", tmp,
- ep->pio_irqs, ep->dma_irqs);
+ "pio", tmp, ep->pio_irqs);
/* TODO translate all five groups of udccs bits! */
} else /* ep0 should only have one transfer queued */
@@ -1422,19 +1145,7 @@ udc_proc_read(char *page, char **start, off_t off, int count,
continue;
}
list_for_each_entry(req, &ep->queue, queue) {
-#ifdef USE_DMA
- if (ep->dma >= 0 && req->queue.prev == &ep->queue)
- t = scnprintf(next, size,
- "\treq %p len %d/%d "
- "buf %p (dma%d dcmd %08x)\n",
- &req->req, req->req.actual,
- req->req.length, req->req.buf,
- ep->dma, DCMD(ep->dma)
- // low 13 bits == bytes-to-go
- );
- else
-#endif
- t = scnprintf(next, size,
+ t = scnprintf(next, size,
"\treq %p len %d/%d buf %p\n",
&req->req, req->req.actual,
req->req.length, req->req.buf);
@@ -1487,7 +1198,6 @@ static void udc_disable(struct pxa2xx_udc *dev)
ep0_idle (dev);
dev->gadget.speed = USB_SPEED_UNKNOWN;
- LED_CONNECTED_OFF;
}
@@ -1513,7 +1223,7 @@ static void udc_reinit(struct pxa2xx_udc *dev)
ep->desc = NULL;
ep->stopped = 0;
INIT_LIST_HEAD (&ep->queue);
- ep->pio_irqs = ep->dma_irqs = 0;
+ ep->pio_irqs = 0;
}
/* the rest was statically initialized, and is read-only */
@@ -1665,7 +1375,6 @@ stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
del_timer_sync(&dev->timer);
/* report disconnect; the driver is already quiesced */
- LED_CONNECTED_OFF;
if (driver)
driver->disconnect(&dev->gadget);
@@ -1714,16 +1423,13 @@ lubbock_vbus_irq(int irq, void *_dev)
int vbus;
dev->stats.irqs++;
- HEX_DISPLAY(dev->stats.irqs);
switch (irq) {
case LUBBOCK_USB_IRQ:
- LED_CONNECTED_ON;
vbus = 1;
disable_irq(LUBBOCK_USB_IRQ);
enable_irq(LUBBOCK_USB_DISC_IRQ);
break;
case LUBBOCK_USB_DISC_IRQ:
- LED_CONNECTED_OFF;
vbus = 0;
disable_irq(LUBBOCK_USB_DISC_IRQ);
enable_irq(LUBBOCK_USB_IRQ);
@@ -2039,18 +1745,6 @@ static void handle_ep(struct pxa2xx_ep *ep)
/* fifos can hold packets, ready for reading... */
if (likely(req)) {
-#ifdef USE_OUT_DMA
-// TODO didn't yet debug out-dma. this approach assumes
-// the worst about short packets and RPC; it might be better.
-
- if (likely(ep->dma >= 0)) {
- if (!(udccs & UDCCS_BO_RSP)) {
- *ep->reg_udccs = UDCCS_BO_RPC;
- ep->dma_irqs++;
- return;
- }
- }
-#endif
completed = read_fifo(ep, req);
} else
pio_irq_disable (ep->bEndpointAddress);
@@ -2073,7 +1767,6 @@ pxa2xx_udc_irq(int irq, void *_dev)
int handled;
dev->stats.irqs++;
- HEX_DISPLAY(dev->stats.irqs);
do {
u32 udccr = UDCCR;
@@ -2124,7 +1817,6 @@ pxa2xx_udc_irq(int irq, void *_dev)
} else {
DBG(DBG_VERBOSE, "USB reset end\n");
dev->gadget.speed = USB_SPEED_FULL;
- LED_CONNECTED_ON;
memset(&dev->stats, 0, sizeof dev->stats);
/* driver and endpoints are still reset */
}
@@ -2216,7 +1908,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.reg_udccs = &UDCCS1,
.reg_uddr = &UDDR1,
- drcmr (25)
},
.ep[2] = {
.ep = {
@@ -2231,7 +1922,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS2,
.reg_ubcr = &UBCR2,
.reg_uddr = &UDDR2,
- drcmr (26)
},
#ifndef CONFIG_USB_PXA2XX_SMALL
.ep[3] = {
@@ -2246,7 +1936,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.reg_udccs = &UDCCS3,
.reg_uddr = &UDDR3,
- drcmr (27)
},
.ep[4] = {
.ep = {
@@ -2261,7 +1950,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS4,
.reg_ubcr = &UBCR4,
.reg_uddr = &UDDR4,
- drcmr (28)
},
.ep[5] = {
.ep = {
@@ -2290,7 +1978,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.reg_udccs = &UDCCS6,
.reg_uddr = &UDDR6,
- drcmr (30)
},
.ep[7] = {
.ep = {
@@ -2305,7 +1992,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS7,
.reg_ubcr = &UBCR7,
.reg_uddr = &UDDR7,
- drcmr (31)
},
.ep[8] = {
.ep = {
@@ -2319,7 +2005,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.reg_udccs = &UDCCS8,
.reg_uddr = &UDDR8,
- drcmr (32)
},
.ep[9] = {
.ep = {
@@ -2334,7 +2019,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS9,
.reg_ubcr = &UBCR9,
.reg_uddr = &UDDR9,
- drcmr (33)
},
.ep[10] = {
.ep = {
@@ -2363,7 +2047,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.reg_udccs = &UDCCS11,
.reg_uddr = &UDDR11,
- drcmr (35)
},
.ep[12] = {
.ep = {
@@ -2378,7 +2061,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS12,
.reg_ubcr = &UBCR12,
.reg_uddr = &UDDR12,
- drcmr (36)
},
.ep[13] = {
.ep = {
@@ -2392,7 +2074,6 @@ static struct pxa2xx_udc memory = {
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
.reg_udccs = &UDCCS13,
.reg_uddr = &UDDR13,
- drcmr (37)
},
.ep[14] = {
.ep = {
@@ -2407,7 +2088,6 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS14,
.reg_ubcr = &UBCR14,
.reg_uddr = &UDDR14,
- drcmr (38)
},
.ep[15] = {
.ep = {
@@ -2465,7 +2145,7 @@ static struct pxa2xx_udc memory = {
static int __init pxa2xx_udc_probe(struct platform_device *pdev)
{
struct pxa2xx_udc *dev = &memory;
- int retval, out_dma = 1, vbus_irq, irq;
+ int retval, vbus_irq, irq;
u32 chiprev;
/* insist on Intel/ARM/XScale */
@@ -2488,7 +2168,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
case PXA250_B2: case PXA210_B2:
case PXA250_B1: case PXA210_B1:
case PXA250_B0: case PXA210_B0:
- out_dma = 0;
+ /* OUT-DMA is broken ... */
/* fall through */
case PXA250_C0: case PXA210_C0:
break;
@@ -2497,11 +2177,9 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
case IXP425_B0:
case IXP465_AD:
dev->has_cfr = 1;
- out_dma = 0;
break;
#endif
default:
- out_dma = 0;
printk(KERN_ERR "%s: unrecognized processor: %08x\n",
driver_name, chiprev);
/* iop3xx, ixp4xx, ... */
@@ -2512,25 +2190,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (irq < 0)
return -ENODEV;
- pr_debug("%s: IRQ %d%s%s%s\n", driver_name, irq,
+ pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
- out_dma ? "" : " (broken dma-out)",
- SIZE_STR DMASTR
+ SIZE_STR "(pio)"
);
-#ifdef USE_DMA
-#ifndef USE_OUT_DMA
- out_dma = 0;
-#endif
- /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */
- if (!out_dma) {
- DMSG("disabled OUT dma\n");
- dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0;
- dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0;
- dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0;
- }
-#endif
-
/* other non-static parts of init */
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
@@ -2619,11 +2283,6 @@ lubbock_fail0:
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
goto lubbock_fail0;
}
-#ifdef DEBUG
- /* with U-Boot (but not BLOB), hex is off by default */
- HEX_DISPLAY(dev->stats.irqs);
- LUB_DISC_BLNK_LED &= 0xff;
-#endif
} else
#endif
if (vbus_irq) {
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 6b012e06af3..0e5d0e6fb0e 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -54,8 +54,6 @@ struct pxa2xx_ep {
const struct usb_endpoint_descriptor *desc;
struct list_head queue;
unsigned long pio_irqs;
- unsigned long dma_irqs;
- short dma;
unsigned short fifo_size;
u8 bEndpointAddress;
@@ -63,7 +61,7 @@ struct pxa2xx_ep {
unsigned stopped : 1;
unsigned dma_fixup : 1;
-
+
/* UDCCS = UDC Control/Status for this EP
* UBCR = UDC Byte Count Remaining (contents of OUT fifo)
* UDDR = UDC Endpoint Data Register (the fifo)
@@ -72,12 +70,6 @@ struct pxa2xx_ep {
volatile u32 *reg_udccs;
volatile u32 *reg_ubcr;
volatile u32 *reg_uddr;
-#ifdef USE_DMA
- volatile u32 *reg_drcmr;
-#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
-#else
-#define drcmr(n)
-#endif
};
struct pxa2xx_request {
@@ -85,7 +77,7 @@ struct pxa2xx_request {
struct list_head queue;
};
-enum ep0_state {
+enum ep0_state {
EP0_IDLE,
EP0_IN_DATA_PHASE,
EP0_OUT_DATA_PHASE,
@@ -108,7 +100,6 @@ struct udc_stats {
#ifdef CONFIG_USB_PXA2XX_SMALL
/* when memory's tight, SMALL config saves code+data. */
-#undef USE_DMA
#define PXA_UDC_NUM_ENDPOINTS 3
#endif
@@ -144,37 +135,8 @@ struct pxa2xx_udc {
#ifdef CONFIG_ARCH_LUBBOCK
#include <asm/arch/lubbock.h>
/* lubbock can also report usb connect/disconnect irqs */
-
-#ifdef DEBUG
-#define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); }
#endif
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* LEDs are only for debug */
-#ifndef HEX_DISPLAY
-#define HEX_DISPLAY(n) do {} while(0)
-#endif
-
-#ifdef DEBUG
-#include <asm/leds.h>
-
-#define LED_CONNECTED_ON leds_event(led_green_on)
-#define LED_CONNECTED_OFF do { \
- leds_event(led_green_off); \
- HEX_DISPLAY(0); \
- } while(0)
-#endif
-
-#ifndef LED_CONNECTED_ON
-#define LED_CONNECTED_ON do {} while(0)
-#define LED_CONNECTED_OFF do {} while(0)
-#endif
-
-/*-------------------------------------------------------------------------*/
-
static struct pxa2xx_udc *the_controller;
/*-------------------------------------------------------------------------*/