diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/host/ohci-au1xxx.c | 102 |
1 files changed, 87 insertions, 15 deletions
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index db280ca7b7a..a1c8b3b2fcc 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -23,6 +23,8 @@ #include <asm/mach-au1x00/au1000.h> +#ifndef CONFIG_SOC_AU1200 + #define USBH_ENABLE_BE (1<<0) #define USBH_ENABLE_C (1<<1) #define USBH_ENABLE_E (1<<2) @@ -37,21 +39,68 @@ #error not byte order defined #endif +#else /* Au1200 */ + +#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG) +#define USB_MCFG_PFEN (1<<31) +#define USB_MCFG_RDCOMB (1<<30) +#define USB_MCFG_SSDEN (1<<23) +#define USB_MCFG_OHCCLKEN (1<<16) +#define USB_MCFG_UCAM (1<<7) +#define USB_MCFG_OBMEN (1<<1) +#define USB_MCFG_OMEMEN (1<<0) + +#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN +#ifdef CONFIG_DMA_COHERENT +#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \ + | USB_MCFG_PFEN | USB_MCFG_RDCOMB \ + | USB_MCFG_SSDEN | USB_MCFG_UCAM \ + | USB_MCFG_OBMEN | USB_MCFG_OMEMEN) +#else +#define USBH_ENABLE_INIT (USB_MCFG_OHCCLKEN \ + | USB_MCFG_PFEN | USB_MCFG_RDCOMB \ + | USB_MCFG_SSDEN \ + | USB_MCFG_OBMEN | USB_MCFG_OMEMEN) +#endif +#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN) + +#endif /* Au1200 */ + extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static void au1xxx_start_hc(struct platform_device *dev) +static void au1xxx_start_ohc(struct platform_device *dev) { printk(KERN_DEBUG __FILE__ ": starting Au1xxx OHCI USB Controller\n"); /* enable host controller */ + +#ifndef CONFIG_SOC_AU1200 + au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG); udelay(1000); au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG); udelay(1000); +#else /* Au1200 */ + + /* write HW defaults again in case Yamon cleared them */ + if (au_readl(USB_HOST_CONFIG) == 0) { + au_writel(0x00d02000, USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + } + au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); + udelay(1000); + +#endif /* Au1200 */ + /* wait for reset complete (read register twice; see au1500 errata) */ while (au_readl(USB_HOST_CONFIG), !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD)) @@ -61,13 +110,25 @@ static void au1xxx_start_hc(struct platform_device *dev) ": Clock to USB host has been enabled \n"); } -static void au1xxx_stop_hc(struct platform_device *dev) +static void au1xxx_stop_ohc(struct platform_device *dev) { printk(KERN_DEBUG __FILE__ ": stopping Au1xxx OHCI USB Controller\n"); +#ifndef CONFIG_SOC_AU1200 + /* Disable clock */ au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG); + +#else /* Au1200 */ + + /* Disable mem */ + au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + udelay(1000); + /* Disable clock */ + au_writel(~USBH_ENABLE_CE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG); + au_readl(USB_HOST_CONFIG); +#endif /* Au1200 */ } @@ -78,7 +139,7 @@ static void au1xxx_stop_hc(struct platform_device *dev) /** - * usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs + * usb_ohci_au1xxx_probe - initialize Au1xxx-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and @@ -86,14 +147,25 @@ static void au1xxx_stop_hc(struct platform_device *dev) * through the hotplug entry's driver_data. * */ -int usb_hcd_au1xxx_probe (const struct hc_driver *driver, +static int usb_ohci_au1xxx_probe(const struct hc_driver *driver, struct platform_device *dev) { int retval; struct usb_hcd *hcd; - if(dev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug ("resource[1] is not IORESOURCE_IRQ"); +#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT) + /* Au1200 AB USB does not support coherent memory */ + if (!(read_c0_prid() & 0xff)) { + pr_info("%s: this is chip revision AB !!\n", + dev->dev.name); + pr_info("%s: update your board or re-configure the kernel\n", + dev->dev.name); + return -ENODEV; + } +#endif + + if (dev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ\n"); return -ENOMEM; } @@ -104,26 +176,26 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver, hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed"); + pr_debug("request_mem_region failed\n"); retval = -EBUSY; goto err1; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { - pr_debug("ioremap failed"); + pr_debug("ioremap failed\n"); retval = -ENOMEM; goto err2; } - au1xxx_start_hc(dev); + au1xxx_start_ohc(dev); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT | SA_SHIRQ); if (retval == 0) return retval; - au1xxx_stop_hc(dev); + au1xxx_stop_ohc(dev); iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -146,10 +218,10 @@ int usb_hcd_au1xxx_probe (const struct hc_driver *driver, * context, normally "rmmod", "apmd", or something similar. * */ -void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev) +static void usb_ohci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev) { usb_remove_hcd(hcd); - au1xxx_stop_hc(dev); + au1xxx_stop_ohc(dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -235,7 +307,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; - ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev); + ret = usb_ohci_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev); return ret; } @@ -243,7 +315,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - usb_hcd_au1xxx_remove(hcd, pdev); + usb_ohci_au1xxx_remove(hcd, pdev); return 0; } /*TBD*/ |