diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/ide-tape.c | 96 |
1 files changed, 15 insertions, 81 deletions
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8b9da8bb5cc..06d21bba4ea 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3152,69 +3152,20 @@ static int idetape_write_filemark (ide_drive_t *drive) } /* - * idetape_mtioctop is called from idetape_chrdev_ioctl when - * the general mtio MTIOCTOP ioctl is requested. + * Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is + * requested. * - * We currently support the following mtio.h operations: + * Note: MTBSF and MTBSFM are not supported when the tape doesn't support + * spacing over filemarks in the reverse direction. In this case, MTFSFM is also + * usually not supported (it is supported in the rare case in which we crossed + * the filemark during our read-ahead pipelined operation mode). * - * MTFSF - Space over mt_count filemarks in the positive direction. - * The tape is positioned after the last spaced filemark. + * The following commands are currently not supported: * - * MTFSFM - Same as MTFSF, but the tape is positioned before the - * last filemark. - * - * MTBSF - Steps background over mt_count filemarks, tape is - * positioned before the last filemark. - * - * MTBSFM - Like MTBSF, only tape is positioned after the last filemark. - * - * Note: - * - * MTBSF and MTBSFM are not supported when the tape doesn't - * support spacing over filemarks in the reverse direction. - * In this case, MTFSFM is also usually not supported (it is - * supported in the rare case in which we crossed the filemark - * during our read-ahead pipelined operation mode). - * - * MTWEOF - Writes mt_count filemarks. Tape is positioned after - * the last written filemark. - * - * MTREW - Rewinds tape. - * - * MTLOAD - Loads the tape. - * - * MTOFFL - Puts the tape drive "Offline": Rewinds the tape and - * MTUNLOAD prevents further access until the media is replaced. - * - * MTNOP - Flushes tape buffers. - * - * MTRETEN - Retension media. This typically consists of one end - * to end pass on the media. - * - * MTEOM - Moves to the end of recorded data. - * - * MTERASE - Erases tape. - * - * MTSETBLK - Sets the user block size to mt_count bytes. If - * mt_count is 0, we will attempt to autodetect - * the block size. - * - * MTSEEK - Positions the tape in a specific block number, where - * each block is assumed to contain which user_block_size - * bytes. - * - * MTSETPART - Switches to another tape partition. - * - * MTLOCK - Locks the tape door. - * - * MTUNLOCK - Unlocks the tape door. - * - * The following commands are currently not supported: - * - * MTFSS, MTBSS, MTWSM, MTSETDENSITY, - * MTSETDRVBUFFER, MT_ST_BOOLEANS, MT_ST_WRITE_THRESHOLD. + * MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS, + * MT_ST_WRITE_THRESHOLD. */ -static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) +static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -3329,29 +3280,12 @@ static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) } /* - * Our character device ioctls. - * - * General mtio.h magnetic io commands are supported here, and not in - * the corresponding block interface. - * - * The following ioctls are supported: - * - * MTIOCTOP - Refer to idetape_mtioctop for detailed description. - * - * MTIOCGET - The mt_dsreg field in the returned mtget structure - * will be set to (user block size in bytes << - * MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK. - * - * The mt_blkno is set to the current user block number. - * The other mtget fields are not supported. - * - * MTIOCPOS - The current tape "block position" is returned. We - * assume that each block contains user_block_size - * bytes. - * - * Our own ide-tape ioctls are supported on both interfaces. + * Our character device ioctls. General mtio.h magnetic io commands are + * supported here, and not in the corresponding block interface. Our own + * ide-tape ioctls are supported on both interfaces. */ -static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { struct ide_tape_obj *tape = ide_tape_f(file); ide_drive_t *drive = tape->drive; |