aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ieee1394/sbp2.c384
-rw-r--r--drivers/ieee1394/sbp2.h80
2 files changed, 109 insertions, 355 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 5156b88b0f2..625f1eb8069 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -404,15 +404,15 @@ static int sbp2util_access_timeout(struct scsi_id_instance_data *scsi_id,
return leftover <= 0;
}
-/* Frees an allocated packet */
static void sbp2_free_packet(struct hpsb_packet *packet)
{
hpsb_free_tlabel(packet);
hpsb_free_packet(packet);
}
-/* This is much like hpsb_node_write(), except it ignores the response
- * subaction and returns immediately. Can be used from interrupts.
+/*
+ * This is much like hpsb_node_write(), except it ignores the response
+ * subaction and returns immediately. Can be used from atomic context.
*/
static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr,
quadlet_t *buffer, size_t length)
@@ -476,10 +476,6 @@ static void sbp2util_write_doorbell(struct work_struct *work)
sbp2util_notify_fetch_agent(container_of(work, struct scsi_id_instance_data, protocol_work), SBP2_DOORBELL_OFFSET, NULL, 4);
}
-/*
- * This function is called to create a pool of command orbs used for
- * command processing. It is called when a new sbp2 device is detected.
- */
static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
@@ -513,9 +509,6 @@ static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_i
return 0;
}
-/*
- * This function is called to delete a pool of command orbs.
- */
static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id)
{
struct hpsb_host *host = scsi_id->hi->host;
@@ -527,8 +520,6 @@ static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_
if (!list_empty(&scsi_id->sbp2_command_orb_completed)) {
list_for_each_safe(lh, next, &scsi_id->sbp2_command_orb_completed) {
command = list_entry(lh, struct sbp2_command_info, list);
-
- /* Release our generic DMA's */
pci_unmap_single(host->pdev, command->command_orb_dma,
sizeof(struct sbp2_command_orb),
PCI_DMA_TODEVICE);
@@ -543,8 +534,8 @@ static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_
}
/*
- * This function finds the sbp2_command for a given outstanding command
- * orb.Only looks at the inuse list.
+ * Finds the sbp2_command for a given outstanding command ORB.
+ * Only looks at the in-use list.
*/
static struct sbp2_command_info *sbp2util_find_command_for_orb(
struct scsi_id_instance_data *scsi_id, dma_addr_t orb)
@@ -566,8 +557,8 @@ static struct sbp2_command_info *sbp2util_find_command_for_orb(
}
/*
- * This function finds the sbp2_command for a given outstanding SCpnt.
- * Only looks at the inuse list.
+ * Finds the sbp2_command for a given outstanding SCpnt.
+ * Only looks at the in-use list.
* Must be called with scsi_id->sbp2_command_orb_lock held.
*/
static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(
@@ -582,9 +573,6 @@ static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(
return NULL;
}
-/*
- * This function allocates a command orb used to send a scsi command.
- */
static struct sbp2_command_info *sbp2util_allocate_command_orb(
struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *Current_SCpnt,
@@ -609,7 +597,6 @@ static struct sbp2_command_info *sbp2util_allocate_command_orb(
return command;
}
-/* Free our DMA's */
static void sbp2util_free_command_dma(struct sbp2_command_info *command)
{
struct scsi_id_instance_data *scsi_id =
@@ -705,7 +692,7 @@ static int sbp2_remove(struct device *dev)
* send them. */
if (!sbp2util_node_is_available(scsi_id))
sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
- /* scsi_remove_device() will trigger shutdown functions of SCSI
+ /* scsi_remove_device() may trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
atomic_set(&scsi_id->state, SBP2LU_STATE_IN_SHUTDOWN);
scsi_unblock_requests(scsi_id->scsi_host);
@@ -727,12 +714,9 @@ static int sbp2_update(struct unit_directory *ud)
struct scsi_id_instance_data *scsi_id = ud->device.driver_data;
if (sbp2_reconnect_device(scsi_id)) {
-
- /*
- * Ok, reconnect has failed. Perhaps we didn't
- * reconnect fast enough. Try doing a regular login, but
- * first do a logout just in case of any weirdness.
- */
+ /* Reconnect has failed. Perhaps we didn't reconnect fast
+ * enough. Try a regular login, but first log out just in
+ * case of any weirdness. */
sbp2_logout_device(scsi_id);
if (sbp2_login_device(scsi_id)) {
@@ -743,18 +727,12 @@ static int sbp2_update(struct unit_directory *ud)
}
}
- /* Set max retries to something large on the device. */
sbp2_set_busy_timeout(scsi_id);
-
- /* Do a SBP-2 fetch agent reset. */
sbp2_agent_reset(scsi_id, 1);
-
- /* Get the max speed and packet size that we can use. */
sbp2_max_speed_and_size(scsi_id);
- /* Complete any pending commands with busy (so they get
- * retried) and remove them from our queue
- */
+ /* Complete any pending commands with busy (so they get retried)
+ * and remove them from our queue. */
sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
/* Accept new commands unless there was another bus reset in the
@@ -766,8 +744,6 @@ static int sbp2_update(struct unit_directory *ud)
return 0;
}
-/* This functions is called by the sbp2_probe, for each new device. We now
- * allocate one scsi host for each scsi_id (unit directory). */
static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud)
{
struct sbp2scsi_host_info *hi;
@@ -843,7 +819,6 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
goto failed_alloc;
}
- /* Register our host with the SCSI stack. */
scsi_host = scsi_host_alloc(&scsi_driver_template,
sizeof(unsigned long));
if (!scsi_host) {
@@ -882,16 +857,11 @@ static void sbp2_host_reset(struct hpsb_host *host)
}
}
-/*
- * This function is where we first pull the node unique ids, and then
- * allocate memory and register a SBP-2 device.
- */
static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
int error;
- /* Login FIFO DMA */
scsi_id->login_response =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_login_response),
@@ -899,7 +869,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->login_response)
goto alloc_fail;
- /* Query logins ORB DMA */
scsi_id->query_logins_orb =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_query_logins_orb),
@@ -907,7 +876,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->query_logins_orb)
goto alloc_fail;
- /* Query logins response DMA */
scsi_id->query_logins_response =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_query_logins_response),
@@ -915,7 +883,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->query_logins_response)
goto alloc_fail;
- /* Reconnect ORB DMA */
scsi_id->reconnect_orb =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_reconnect_orb),
@@ -923,7 +890,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->reconnect_orb)
goto alloc_fail;
- /* Logout ORB DMA */
scsi_id->logout_orb =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_logout_orb),
@@ -931,7 +897,6 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->logout_orb)
goto alloc_fail;
- /* Login ORB DMA */
scsi_id->login_orb =
pci_alloc_consistent(hi->host->pdev,
sizeof(struct sbp2_login_orb),
@@ -939,51 +904,28 @@ static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
if (!scsi_id->login_orb)
goto alloc_fail;
- /*
- * Create our command orb pool
- */
if (sbp2util_create_command_orb_pool(scsi_id)) {
SBP2_ERR("sbp2util_create_command_orb_pool failed!");
sbp2_remove_device(scsi_id);
return -ENOMEM;
}
- /* Schedule a timeout here. The reason is that we may be so close
- * to a bus reset, that the device is not available for logins.
- * This can happen when the bus reset is caused by the host
- * connected to the sbp2 device being removed. That host would
- * have a certain amount of time to relogin before the sbp2 device
- * allows someone else to login instead. One second makes sense. */
+ /* Wait a second before trying to log in. Previously logged in
+ * initiators need a chance to reconnect. */
if (msleep_interruptible(1000)) {
sbp2_remove_device(scsi_id);
return -EINTR;
}
- /*
- * Login to the sbp-2 device
- */
if (sbp2_login_device(scsi_id)) {
- /* Login failed, just remove the device. */
sbp2_remove_device(scsi_id);
return -EBUSY;
}
- /*
- * Set max retries to something large on the device
- */
sbp2_set_busy_timeout(scsi_id);
-
- /*
- * Do a SBP-2 fetch agent reset
- */
sbp2_agent_reset(scsi_id, 1);
-
- /*
- * Get the max speed and packet size that we can use
- */
sbp2_max_speed_and_size(scsi_id);
- /* Add this device to the scsi layer now */
error = scsi_add_device(scsi_id->scsi_host, 0, scsi_id->ud->id, 0);
if (error) {
SBP2_ERR("scsi_add_device failed");
@@ -1000,9 +942,6 @@ alloc_fail:
return -ENOMEM;
}
-/*
- * This function removes an sbp2 device from the sbp2scsi_host_info struct.
- */
static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi;
@@ -1012,7 +951,6 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
hi = scsi_id->hi;
- /* This will remove our scsi device aswell */
if (scsi_id->scsi_host) {
scsi_remove_host(scsi_id->scsi_host);
scsi_host_put(scsi_id->scsi_host);
@@ -1067,33 +1005,25 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/*
- * This function deals with physical dma write requests (for adapters that do not support
- * physical dma in hardware). Mostly just here for debugging...
+ * Deal with write requests on adapters which do not support physical DMA or
+ * have it switched off.
*/
static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid,
int destid, quadlet_t *data, u64 addr,
size_t length, u16 flags)
{
-
- /*
- * Manually put the data in the right place.
- */
memcpy(bus_to_virt((u32) addr), data, length);
return RCODE_COMPLETE;
}
/*
- * This function deals with physical dma read requests (for adapters that do not support
- * physical dma in hardware). Mostly just here for debugging...
+ * Deal with read requests on adapters which do not support physical DMA or
+ * have it switched off.
*/
static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
quadlet_t *data, u64 addr, size_t length,
u16 flags)
{
-
- /*
- * Grab data from memory and send a read response.
- */
memcpy(data, bus_to_virt((u32) addr), length);
return RCODE_COMPLETE;
}
@@ -1103,10 +1033,6 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
* SBP-2 protocol related section
**************************************/
-/*
- * This function queries the device for the maximum concurrent logins it
- * supports.
- */
static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
@@ -1172,10 +1098,6 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called in order to login to a particular SBP-2 device,
- * after a bus reset.
- */
static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
@@ -1191,17 +1113,18 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
}
}
- /* Set-up login ORB, assume no password */
+ /* assume no password */
scsi_id->login_orb->password_hi = 0;
scsi_id->login_orb->password_lo = 0;
scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma;
scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
-
scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
- scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */
- scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */
- scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */
+
+ /* one second reconnect time */
+ scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0);
+ scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login);
+ scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1);
scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
scsi_id->login_orb->passwd_resp_lengths =
@@ -1222,17 +1145,13 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
- /*
- * Wait for login status (up to 20 seconds)...
- */
+ /* wait up to 20 seconds for login status */
if (sbp2util_access_timeout(scsi_id, 20*HZ)) {
SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
- /*
- * Sanity. Make sure status returned matches login orb.
- */
+ /* make sure that the returned status matches the login ORB */
if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) {
SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
@@ -1243,15 +1162,7 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
return -EIO;
}
- /*
- * Byte swap the login response, for use when reconnecting or
- * logging out.
- */
sbp2util_cpu_to_be32_buffer(scsi_id->login_response, sizeof(struct sbp2_login_response));
-
- /*
- * Grab our command block agent address from the login response.
- */
scsi_id->sbp2_command_block_agent_addr =
((u64)scsi_id->login_response->command_block_agent_hi) << 32;
scsi_id->sbp2_command_block_agent_addr |= ((u64)scsi_id->login_response->command_block_agent_lo);
@@ -1261,19 +1172,12 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called in order to logout from a particular SBP-2
- * device, usually called during driver unload.
- */
static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
quadlet_t data[2];
int error;
- /*
- * Set-up logout ORB
- */
scsi_id->logout_orb->reserved1 = 0x0;
scsi_id->logout_orb->reserved2 = 0x0;
scsi_id->logout_orb->reserved3 = 0x0;
@@ -1281,8 +1185,6 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
scsi_id->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST);
scsi_id->logout_orb->login_ID_misc |= ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID);
-
- /* Notify us when complete */
scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->logout_orb->reserved5 = 0x0;
@@ -1291,14 +1193,8 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
scsi_id->logout_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
- /*
- * Byte swap ORB if necessary
- */
sbp2util_cpu_to_be32_buffer(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb));
- /*
- * Ok, let's write to the target's management agent register
- */
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->logout_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
@@ -1308,7 +1204,7 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
if (error)
return error;
- /* Wait for device to logout...1 second. */
+ /* wait up to 1 second for the device to complete logout */
if (sbp2util_access_timeout(scsi_id, HZ))
return -EIO;
@@ -1316,19 +1212,12 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called in order to reconnect to a particular SBP-2
- * device, after a bus reset.
- */
static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
quadlet_t data[2];
int error;
- /*
- * Set-up reconnect ORB
- */
scsi_id->reconnect_orb->reserved1 = 0x0;
scsi_id->reconnect_orb->reserved2 = 0x0;
scsi_id->reconnect_orb->reserved3 = 0x0;
@@ -1337,8 +1226,6 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
scsi_id->reconnect_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST);
scsi_id->reconnect_orb->login_ID_misc |=
ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID);
-
- /* Notify us when complete */
scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
scsi_id->reconnect_orb->reserved5 = 0x0;
@@ -1347,9 +1234,6 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
scsi_id->reconnect_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
- /*
- * Byte swap ORB if necessary
- */
sbp2util_cpu_to_be32_buffer(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
@@ -1361,17 +1245,13 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
if (error)
return error;
- /*
- * Wait for reconnect status (up to 1 second)...
- */
+ /* wait up to 1 second for reconnect status */
if (sbp2util_access_timeout(scsi_id, HZ)) {
SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
- /*
- * Sanity. Make sure status returned matches reconnect orb.
- */
+ /* make sure that the returned status matches the reconnect ORB */
if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) {
SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
@@ -1387,8 +1267,8 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
}
/*
- * This function is called in order to set the busy timeout (number of
- * retries to attempt) on the sbp2 device.
+ * Set the target node's Single Phase Retry limit. Affects the target's retry
+ * behaviour if our node is too busy to accept requests.
*/
static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id)
{
@@ -1400,11 +1280,6 @@ static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called to parse sbp2 device's config rom unit
- * directory. Used to determine things like sbp2 management agent offset,
- * and command set used (SCSI or RBC).
- */
static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct unit_directory *ud)
{
@@ -1422,12 +1297,10 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
unit_characteristics = 0x0;
firmware_revision = 0x0;
- /* Handle different fields in the unit directory, based on keys */
csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
switch (kv->key.id) {
case CSR1212_KV_ID_DEPENDENT_INFO:
if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET)
- /* Save off the management agent address */
management_agent_addr =
CSR1212_REGISTER_SPACE_BASE +
(kv->value.csr_offset << 2);
@@ -1438,29 +1311,27 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
break;
case SBP2_COMMAND_SET_SPEC_ID_KEY:
- /* Command spec organization */
command_set_spec_id = kv->value.immediate;
break;
case SBP2_COMMAND_SET_KEY:
- /* Command set used by sbp2 device */
command_set = kv->value.immediate;
break;
case SBP2_UNIT_CHARACTERISTICS_KEY:
- /*
- * Unit characterisitcs (orb related stuff
- * that I'm not yet paying attention to)
- */
+ /* FIXME: This is ignored so far.
+ * See SBP-2 clause 7.4.8. */
unit_characteristics = kv->value.immediate;
break;
case SBP2_FIRMWARE_REVISION_KEY:
- /* Firmware revision */
firmware_revision = kv->value.immediate;
break;
default:
+ /* FIXME: Check for SBP2_DEVICE_TYPE_AND_LUN_KEY.
+ * Its "ordered" bit has consequences for command ORB
+ * list handling. See SBP-2 clauses 4.6, 7.4.11, 10.2 */
break;
}
}
@@ -1536,7 +1407,6 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
scsi_id->speed_code =
hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)];
- /* Bump down our speed if the user requested it */
if (scsi_id->speed_code > max_speed) {
scsi_id->speed_code = max_speed;
SBP2_INFO("Reducing speed to %s", hpsb_speedto_str[max_speed]);
@@ -1563,9 +1433,6 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called in order to perform a SBP-2 agent reset.
- */
static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait)
{
quadlet_t data;
@@ -1590,9 +1457,7 @@ static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait)
return -EIO;
}
- /*
- * Need to make sure orb pointer is written on next command
- */
+ /* make sure that the ORB_POINTER is written on next command */
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
scsi_id->last_orb = NULL;
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
@@ -1612,7 +1477,7 @@ static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
- /* Special case if only one element (and less than 64KB in size) */
+ /* special case if only one element (and less than 64KB in size) */
if ((scsi_use_sg == 1) &&
(sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) {
@@ -1642,10 +1507,8 @@ static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
orb->data_descriptor_lo = command->sge_dma;
- /*
- * Loop through and fill out our sbp-2 page tables
- * (and split up anything too large)
- */
+ /* loop through and fill out our SBP-2 page tables
+ * (and split up anything too large) */
for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) {
sg_len = sg_dma_len(sgpnt);
sg_addr = sg_dma_address(sgpnt);
@@ -1665,10 +1528,8 @@ static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
}
}
- /* Number of page table (s/g) elements */
orb->misc |= ORB_SET_DATA_SIZE(sg_count);
- /* Byte swap page tables if necessary */
sbp2util_cpu_to_be32_buffer(sg_element,
(sizeof(struct sbp2_unrestricted_page_table)) *
sg_count);
@@ -1692,34 +1553,25 @@ static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
- /*
- * Handle case where we get a command w/o s/g enabled (but
- * check for transfers larger than 64K)
- */
+ /* handle case where we get a command w/o s/g enabled
+ * (but check for transfers larger than 64K) */
if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) {
orb->data_descriptor_lo = command->cmd_dma;
orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen);
} else {
+ /* The buffer is too large. Turn this into page tables. */
+
struct sbp2_unrestricted_page_table *sg_element =
&command->scatter_gather_element[0];
u32 sg_count, sg_len;
dma_addr_t sg_addr;
- /*
- * Need to turn this into page tables, since the
- * buffer is too large.
- */
orb->data_descriptor_lo = command->sge_dma;
-
- /* Use page tables (s/g) */
orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
- /*
- * fill out our sbp-2 page tables (and split up
- * the large buffer)
- */
+ /* fill out our SBP-2 page tables; split up the large buffer */
sg_count = 0;
sg_len = scsi_request_bufflen;
sg_addr = command->cmd_dma;
@@ -1738,20 +1590,14 @@ static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
sg_count++;
}
- /* Number of page table (s/g) elements */
orb->misc |= ORB_SET_DATA_SIZE(sg_count);
- /* Byte swap page tables if necessary */
sbp2util_cpu_to_be32_buffer(sg_element,
(sizeof(struct sbp2_unrestricted_page_table)) *
sg_count);
}
}
-/*
- * This function is called to create the actual command orb and s/g list
- * out of the scsi command itself.
- */
static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command,
unchar *scsi_cmd,
@@ -1766,7 +1612,7 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
u32 orb_direction;
/*
- * Set-up our command ORB..
+ * Set-up our command ORB.
*
* NOTE: We're doing unrestricted page tables (s/g), as this is
* best performance (at least with the devices I have). This means
@@ -1777,7 +1623,7 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
command_orb->next_ORB_lo = 0x0;
command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size);
command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code);
- command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */
+ command_orb->misc |= ORB_SET_NOTIFY(1);
if (dma_dir == DMA_NONE)
orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
@@ -1790,7 +1636,7 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
}
- /* Set-up our pagetable stuff */
+ /* set up our page table stuff */
if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) {
command_orb->data_descriptor_hi = 0x0;
command_orb->data_descriptor_lo = 0x0;
@@ -1803,17 +1649,12 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
orb_direction, scsi_request_bufflen,
scsi_request_buffer, dma_dir);
- /* Byte swap command ORB if necessary */
sbp2util_cpu_to_be32_buffer(command_orb, sizeof(struct sbp2_command_orb));
- /* Put our scsi command in the command ORB */
memset(command_orb->cdb, 0, 12);
memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
}
-/*
- * This function is called in order to begin a regular SBP-2 command.
- */
static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
struct sbp2_command_info *command)
{
@@ -1832,9 +1673,8 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
- /*
- * Check to see if there are any previous orbs to use
- */
+
+ /* check to see if there are any previous orbs to use */
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
last_orb = scsi_id->last_orb;
last_orb_dma = scsi_id->last_orb_dma;
@@ -1892,9 +1732,6 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
}
}
-/*
- * This function is called in order to begin a regular SBP-2 command.
- */
static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
@@ -1903,23 +1740,13 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
unsigned int request_bufflen = SCpnt->request_bufflen;
struct sbp2_command_info *command;
- /*
- * Allocate a command orb and s/g structure
- */
command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done);
if (!command)
return -EIO;
- /*
- * Now actually fill in the comamnd orb and sbp2 s/g list
- */
sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg,
request_bufflen, SCpnt->request_buffer,
SCpnt->sc_data_direction);
-
- /*
- * Link up the orb, and ring the doorbell if needed
- */
sbp2_link_orb_command(scsi_id, command);
return 0;
@@ -1930,9 +1757,7 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
*/
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data)
{
- /*
- * Ok, it's pretty ugly... ;-)
- */
+ /* OK, it's pretty ugly... ;-) */
sense_data[0] = 0x70;
sense_data[1] = 0x0;
sense_data[2] = sbp2_status[9];
@@ -1950,12 +1775,9 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
sense_data[14] = sbp2_status[20];
sense_data[15] = sbp2_status[21];
- return sbp2_status[8] & 0x3f; /* return scsi status */
+ return sbp2_status[8] & 0x3f;
}
-/*
- * This function deals with status writes from the SBP-2 device
- */
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
int destid, quadlet_t *data, u64 addr,
size_t length, u16 fl)
@@ -1981,10 +1803,8 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
SBP2_ERR("host info is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
- /*
- * Find our scsi_id structure by looking at the status fifo address
- * written to by the sbp2 device.
- */
+
+ /* Find the unit which wrote the status. */
list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
if (scsi_id_tmp->ne->nodeid == nodeid &&
scsi_id_tmp->status_fifo_addr == addr) {
@@ -1997,20 +1817,16 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
return RCODE_ADDRESS_ERROR;
}
- /*
- * Put response into scsi_id status fifo buffer. The first two bytes
+ /* Put response into scsi_id status fifo buffer. The first two bytes
* come in big endian bit order. Often the target writes only a
* truncated status block, minimally the first two quadlets. The rest
- * is implied to be zeros.
- */
+ * is implied to be zeros. */
sb = &scsi_id->status_block;
memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent));
memcpy(sb, data, length);
sbp2util_be32_to_cpu_buffer(sb, 8);
- /*
- * Ignore unsolicited status. Handle command ORB status.
- */
+ /* Ignore unsolicited status. Handle command ORB status. */
if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2))
command = NULL;
else
@@ -2023,10 +1839,7 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
sizeof(command->scatter_gather_element),
PCI_DMA_BIDIRECTIONAL);
- /*
- * Matched status with command, now grab scsi command pointers
- * and check status.
- */
+ /* Grab SCSI command pointers and check status. */
/*
* FIXME: If the src field in the status is 1, the ORB DMA must
* not be reused until status for a subsequent ORB is received.
@@ -2048,37 +1861,28 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
SBP2_SCSI_STATUS_BUSY :
SBP2_SCSI_STATUS_COMMAND_TERMINATED;
}
- /*
- * See if the target stored any scsi status information.
- */
+
if (STATUS_GET_LEN(h) > 1)
scsi_status = sbp2_status_to_sense_data(
(unchar *)sb, SCpnt->sense_buffer);
- /*
- * Check to see if the dead bit is set. If so, we'll
- * have to initiate a fetch agent reset.
- */
+
if (STATUS_TEST_DEAD(h))
sbp2_agent_reset(scsi_id, 0);
}
- /*
- * Check here to see if there are no commands in-use. If there
+ /* Check here to see if there are no commands in-use. If there
* are none, we know that the fetch agent left the active state
* _and_ that we did not reactivate it yet. Therefore clear
* last_orb so that next time we write directly to the
* ORB_POINTER register. That way the fetch agent does not need
- * to refetch the next_ORB.
- */
+ * to refetch the next_ORB. */
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
if (list_empty(&scsi_id->sbp2_command_orb_inuse))
scsi_id->last_orb = NULL;
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
} else {
- /*
- * It's probably a login/logout/reconnect status.
- */
+ /* It's probably status after a management request. */
if ((sb->ORB_offset_lo == scsi_id->reconnect_orb_dma) ||
(sb->ORB_offset_lo == scsi_id->login_orb_dma) ||
(sb->ORB_offset_lo == scsi_id->query_logins_orb_dma) ||
@@ -2098,10 +1902,6 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
* SCSI interface related section
**************************************/
-/*
- * This routine is the main request entry routine for doing I/O. It is
- * called from the scsi stack directly.
- */
static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
@@ -2120,17 +1920,13 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
goto done;
}
- /*
- * Until we handle multiple luns, just return selection time-out
- * to any IO directed at non-zero LUNs
- */
+ /* Multiple units are currently represented to the SCSI core as separate
+ * targets, not as one target with multiple LUs. Therefore return
+ * selection time-out to any IO directed at non-zero LUNs. */
if (SCpnt->device->lun)
goto done;
- /*
- * Check for request sense command, and handle it here
- * (autorequest sense)
- */
+ /* handle the request sense command here (auto-request sense) */
if (SCpnt->cmnd[0] == REQUEST_SENSE) {
memcpy(SCpnt->request_buffer, SCpnt->sense_buffer, SCpnt->request_bufflen);
memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
@@ -2138,28 +1934,20 @@ static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
return 0;
}
- /*
- * Check to see if we are in the middle of a bus reset.
- */
if (!hpsb_node_entry_valid(scsi_id->ne)) {
SBP2_ERR("Bus reset in progress - rejecting command");
result = DID_BUS_BUSY << 16;
goto done;
}
- /*
- * Bidirectional commands are not yet implemented,
- * and unknown transfer direction not handled.
- */
+ /* Bidirectional commands are not yet implemented,
+ * and unknown transfer direction not handled. */
if (SCpnt->sc_data_direction == DMA_BIDIRECTIONAL) {
SBP2_ERR("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
result = DID_ERROR << 16;
goto done;
}
- /*
- * Try and send our SCSI command
- */
if (sbp2_send_command(scsi_id, SCpnt, done)) {
SBP2_ERR("Error sending SCSI command");
sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_SELECTION_TIMEOUT,
@@ -2173,10 +1961,6 @@ done:
return 0;
}
-/*
- * This function is called in order to complete all outstanding SBP-2
- * commands (in case of resets, etc.).
- */
static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id,
u32 status)
{
@@ -2207,25 +1991,17 @@ static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id
}
/*
- * This function is called in order to complete a regular SBP-2 command.
- *
- * This can be called in interrupt context.
+ * Complete a regular SCSI command. Can be called in atomic context.
*/
static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
u32 scsi_status, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- /*
- * Sanity
- */
if (!SCpnt) {
SBP2_ERR("SCpnt is NULL");
return;
}
- /*
- * Switch on scsi status
- */
switch (scsi_status) {
case SBP2_SCSI_STATUS_GOOD:
SCpnt->result = DID_OK << 16;
@@ -2259,19 +2035,15 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
SCpnt->result = DID_ERROR << 16;
}
- /*
- * If a bus reset is in progress and there was an error, complete
- * the command as busy so that it will get retried.
- */
+ /* If a bus reset is in progress and there was an error, complete
+ * the command as busy so that it will get retried. */
if (!hpsb_node_entry_valid(scsi_id->ne)
&& (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
SBP2_ERR("Completing command with busy (bus reset)");
SCpnt->result = DID_BUS_BUSY << 16;
}
- /*
- * Tell scsi stack that we're done with this command
- */
+ /* Tell the SCSI stack that we're done with this command. */
done(SCpnt);
}
@@ -2311,8 +2083,8 @@ static void sbp2scsi_slave_destroy(struct scsi_device *sdev)
}
/*
- * Called by scsi stack when something has really gone wrong. Usually
- * called when a command has timed-out for some reason.
+ * Called by scsi stack when something has really gone wrong.
+ * Usually called when a command has timed-out for some reason.
*/
static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
{
@@ -2401,7 +2173,6 @@ static int sbp2_module_init(void)
{
int ret;
- /* Module load debug option to force one command at a time (serializing I/O) */
if (serialize_io) {
scsi_driver_template.can_queue = 1;
scsi_driver_template.cmd_per_lun = 1;
@@ -2412,16 +2183,13 @@ static int sbp2_module_init(void)
max_sectors = 128 * 1024 / 512;
scsi_driver_template.max_sectors = max_sectors;
- /* Register our high level driver with 1394 stack */
hpsb_register_highlevel(&sbp2_highlevel);
-
ret = hpsb_register_protocol(&sbp2_driver);
if (ret) {
SBP2_ERR("Failed to register protocol");
hpsb_unregister_highlevel(&sbp2_highlevel);
return ret;
}
-
return 0;
}
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index 5483b458bd7..d1dbc0d6317 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -25,7 +25,7 @@
#define SBP2_DEVICE_NAME "sbp2"
/*
- * SBP2 specific structures and defines
+ * SBP-2 specific definitions
*/
#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
@@ -185,8 +185,9 @@ struct sbp2_status_block {
u8 command_set_dependent[24];
} __attribute__((packed));
+
/*
- * Miscellaneous SBP2 related config rom defines
+ * SBP2 related configuration ROM definitions
*/
#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
@@ -207,19 +208,17 @@ struct sbp2_status_block {
#define SBP2_UNSOLICITED_STATUS_VALUE 0xf
#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
+/* biggest possible value for Single Phase Retry count is 0xf */
#define SBP2_BUSY_TIMEOUT_VALUE 0xf
#define SBP2_AGENT_RESET_DATA 0xf
-/*
- * Unit spec id and sw version entry for SBP-2 devices
- */
-
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
+
/*
- * SCSI specific stuff
+ * SCSI specific definitions
*/
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
@@ -237,18 +236,19 @@ struct sbp2_status_block {
#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
-/* This is the two dma types we use for cmd_dma below */
+
+/*
+ * Representations of commands and devices
+ */
+
enum cmd_dma_types {
CMD_DMA_NONE,
CMD_DMA_PAGE,
CMD_DMA_SINGLE
};
-/*
- * Encapsulates all the info necessary for an outstanding command.
- */
+/* Per SCSI command */
struct sbp2_command_info {
-
struct list_head list;
struct sbp2_command_orb command_orb ____cacheline_aligned;
dma_addr_t command_orb_dma ____cacheline_aligned;
@@ -263,18 +263,17 @@ struct sbp2_command_info {
enum cmd_dma_types dma_type;
unsigned long dma_size;
int dma_dir;
-
};
-struct sbp2scsi_host_info;
+/* Per FireWire host */
+struct sbp2scsi_host_info {
+ struct hpsb_host *host;
+ struct list_head scsi_ids;
+};
-/*
- * Information needed on a per scsi id basis (one for each sbp2 device)
- */
+/* Per logical unit */
struct scsi_id_instance_data {
- /*
- * Various sbp2 specific structures
- */
+ /* Operation request blocks */
struct sbp2_command_orb *last_orb;
dma_addr_t last_orb_dma;
struct sbp2_login_orb *login_orb;
@@ -291,57 +290,49 @@ struct scsi_id_instance_data {
dma_addr_t logout_orb_dma;
struct sbp2_status_block status_block;
- /*
- * Stuff we need to know about the sbp2 device itself
- */
+ /* How to talk to the unit */
u64 sbp2_management_agent_addr;
u64 sbp2_command_block_agent_addr;
u32 speed_code;
u32 max_payload_size;
- /*
- * Values pulled from the device's unit directory
- */
+ /* Pulled from the device's unit directory */
u32 sbp2_command_set_spec_id;
u32 sbp2_command_set;
u32 sbp2_unit_characteristics;
u32 sbp2_lun;
u32 sbp2_firmware_revision;
- /*
- * Address for the device to write status blocks to
- */
+ /* Address for the unit to write status blocks to */
u64 status_fifo_addr;
- /*
- * Waitqueue flag for logins, reconnects, logouts, query logins
- */
+ /* Waitqueue flag for logins, reconnects, logouts, query logins */
int access_complete:1;
- /*
- * Pool of command orbs, so we can have more than overlapped command per id
- */
+ /* Pool of command ORBs for this logical unit */
spinlock_t sbp2_command_orb_lock;
struct list_head sbp2_command_orb_inuse;
struct list_head sbp2_command_orb_completed;
+ /* Backlink to FireWire host; list of units attached to the host */
+ struct sbp2scsi_host_info *hi;
struct list_head scsi_list;
- /* Node entry, as retrieved from NodeMgr entries */
+ /* IEEE 1394 core's device representations */
struct node_entry *ne;
struct unit_directory *ud;
- /* A backlink to our host_info */
- struct sbp2scsi_host_info *hi;
-
- /* SCSI related pointers */
+ /* SCSI core's device representations */
struct scsi_device *sdev;
struct Scsi_Host *scsi_host;
/* Device specific workarounds/brokeness */
unsigned workarounds;
+ /* Connection state */
atomic_t state;
+
+ /* For deferred requests to the fetch agent */
struct work_struct protocol_work;
};
@@ -352,13 +343,8 @@ enum sbp2lu_state_types {
SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */
};
-/* Sbp2 host data structure (one per IEEE1394 host) */
-struct sbp2scsi_host_info {
- struct hpsb_host *host; /* IEEE1394 host */
- struct list_head scsi_ids; /* List of scsi ids on this host */
-};
-
-/* Flags for detected oddities and brokeness */
+/* For use in scsi_id_instance_data.workarounds and in the corresponding
+ * module load parameter */
#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
#define SBP2_WORKAROUND_INQUIRY_36 0x2
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4