diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/chips/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/i2c/chips/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/chips/mcu_mpc8349emitx.c | 209 |
3 files changed, 0 insertions, 221 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 59c3d23f5bd..b9bef04b7be 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -139,15 +139,4 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config MCU_MPC8349EMITX - tristate "MPC8349E-mITX MCU driver" - depends on I2C && PPC_83xx - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Say Y here to enable soft power-off functionality on the Freescale - boards with the MPC8349E-mITX-compatible MCU chips. This driver will - also register MCU GPIOs with the generic GPIO API, so you'll able - to use MCU pins as GPIOs. - endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 83accaaf816..00fcb5193ac 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o -obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c deleted file mode 100644 index 82a9bcb858b..00000000000 --- a/drivers/i2c/chips/mcu_mpc8349emitx.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU - * - * Copyright (c) 2008 MontaVista Software, Inc. - * - * Author: Anton Vorontsov <avorontsov@ru.mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/of.h> -#include <linux/of_gpio.h> -#include <asm/prom.h> -#include <asm/machdep.h> - -/* - * I don't have specifications for the MCU firmware, I found this register - * and bits positions by the trial&error method. - */ -#define MCU_REG_CTRL 0x20 -#define MCU_CTRL_POFF 0x40 - -#define MCU_NUM_GPIO 2 - -struct mcu { - struct mutex lock; - struct device_node *np; - struct i2c_client *client; - struct of_gpio_chip of_gc; - u8 reg_ctrl; -}; - -static struct mcu *glob_mcu; - -static void mcu_power_off(void) -{ - struct mcu *mcu = glob_mcu; - - pr_info("Sending power-off request to the MCU...\n"); - mutex_lock(&mcu->lock); - i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL, - mcu->reg_ctrl | MCU_CTRL_POFF); - mutex_unlock(&mcu->lock); -} - -static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); - struct mcu *mcu = container_of(of_gc, struct mcu, of_gc); - u8 bit = 1 << (4 + gpio); - - mutex_lock(&mcu->lock); - if (val) - mcu->reg_ctrl &= ~bit; - else - mcu->reg_ctrl |= bit; - - i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); - mutex_unlock(&mcu->lock); -} - -static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - mcu_gpio_set(gc, gpio, val); - return 0; -} - -static int mcu_gpiochip_add(struct mcu *mcu) -{ - struct device_node *np; - struct of_gpio_chip *of_gc = &mcu->of_gc; - struct gpio_chip *gc = &of_gc->gc; - int ret; - - np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); - if (!np) - return -ENODEV; - - gc->owner = THIS_MODULE; - gc->label = np->full_name; - gc->can_sleep = 1; - gc->ngpio = MCU_NUM_GPIO; - gc->base = -1; - gc->set = mcu_gpio_set; - gc->direction_output = mcu_gpio_dir_out; - of_gc->gpio_cells = 2; - of_gc->xlate = of_gpio_simple_xlate; - - np->data = of_gc; - mcu->np = np; - - /* - * We don't want to lose the node, its ->data and ->full_name... - * So, if succeeded, we don't put the node here. - */ - ret = gpiochip_add(gc); - if (ret) - of_node_put(np); - return ret; -} - -static int mcu_gpiochip_remove(struct mcu *mcu) -{ - int ret; - - ret = gpiochip_remove(&mcu->of_gc.gc); - if (ret) - return ret; - of_node_put(mcu->np); - - return 0; -} - -static int __devinit mcu_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct mcu *mcu; - int ret; - - mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); - if (!mcu) - return -ENOMEM; - - mutex_init(&mcu->lock); - mcu->client = client; - i2c_set_clientdata(client, mcu); - - ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); - if (ret < 0) - goto err; - mcu->reg_ctrl = ret; - - ret = mcu_gpiochip_add(mcu); - if (ret) - goto err; - - /* XXX: this is potentially racy, but there is no lock for ppc_md */ - if (!ppc_md.power_off) { - glob_mcu = mcu; - ppc_md.power_off = mcu_power_off; - dev_info(&client->dev, "will provide power-off service\n"); - } - - return 0; -err: - kfree(mcu); - return ret; -} - -static int __devexit mcu_remove(struct i2c_client *client) -{ - struct mcu *mcu = i2c_get_clientdata(client); - int ret; - - if (glob_mcu == mcu) { - ppc_md.power_off = NULL; - glob_mcu = NULL; - } - - ret = mcu_gpiochip_remove(mcu); - if (ret) - return ret; - i2c_set_clientdata(client, NULL); - kfree(mcu); - return 0; -} - -static const struct i2c_device_id mcu_ids[] = { - { "mcu-mpc8349emitx", }, - {}, -}; -MODULE_DEVICE_TABLE(i2c, mcu_ids); - -static struct i2c_driver mcu_driver = { - .driver = { - .name = "mcu-mpc8349emitx", - .owner = THIS_MODULE, - }, - .probe = mcu_probe, - .remove = __devexit_p(mcu_remove), - .id_table = mcu_ids, -}; - -static int __init mcu_init(void) -{ - return i2c_add_driver(&mcu_driver); -} -module_init(mcu_init); - -static void __exit mcu_exit(void) -{ - i2c_del_driver(&mcu_driver); -} -module_exit(mcu_exit); - -MODULE_DESCRIPTION("Power Management and GPIO expander driver for " - "MPC8349E-mITX-compatible MCU"); -MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); -MODULE_LICENSE("GPL"); |