aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/sk98lin/Makefile3
-rw-r--r--drivers/net/sk98lin/skge.c42
-rw-r--r--drivers/net/sk98lin/skproc.c265
3 files changed, 2 insertions, 308 deletions
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
index 7653d6e33aa..afd900d5d73 100644
--- a/drivers/net/sk98lin/Makefile
+++ b/drivers/net/sk98lin/Makefile
@@ -26,8 +26,7 @@ sk98lin-objs := \
skrlmt.o \
sktimer.o \
skvpd.o \
- skxmac2.o \
- skproc.o
+ skxmac2.o
# DBGDEF = \
# -DDEBUG
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 8338d497250..e3bdb583600 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -110,7 +110,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
#include <linux/ip.h>
@@ -234,28 +233,6 @@ static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
* Extern Function Prototypes
*
******************************************************************************/
-static const char SKRootName[] = "net/sk98lin";
-static struct proc_dir_entry *pSkRootDir;
-extern struct file_operations sk_proc_fops;
-
-static inline void SkGeProcCreate(struct net_device *dev)
-{
- struct proc_dir_entry *pe;
-
- if (pSkRootDir &&
- (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) {
- pe->proc_fops = &sk_proc_fops;
- pe->data = dev;
- pe->owner = THIS_MODULE;
- }
-}
-
-static inline void SkGeProcRemove(struct net_device *dev)
-{
- if (pSkRootDir)
- remove_proc_entry(dev->name, pSkRootDir);
-}
-
extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);
extern void SkDimDisplayModerationSettings(SK_AC *pAC);
extern void SkDimStartModerationTimer(SK_AC *pAC);
@@ -4898,8 +4875,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- SkGeProcCreate(dev);
-
pNet->PortNr = 0;
pNet->NetNr = 0;
@@ -4947,7 +4922,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
free_netdev(dev);
pAC->dev[1] = pAC->dev[0];
} else {
- SkGeProcCreate(dev);
memcpy(&dev->dev_addr,
&pAC->Addr.Net[1].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
@@ -4988,10 +4962,7 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
SK_AC *pAC = pNet->pAC;
struct net_device *otherdev = pAC->dev[1];
- SkGeProcRemove(dev);
unregister_netdev(dev);
- if (otherdev != dev)
- SkGeProcRemove(otherdev);
SkGeYellowLED(pAC, pAC->IoBase, 0);
@@ -5136,23 +5107,12 @@ static struct pci_driver skge_driver = {
static int __init skge_init(void)
{
- int error;
-
- pSkRootDir = proc_mkdir(SKRootName, NULL);
- if (pSkRootDir)
- pSkRootDir->owner = THIS_MODULE;
-
- error = pci_register_driver(&skge_driver);
- if (error)
- remove_proc_entry(SKRootName, NULL);
- return error;
+ return pci_module_init(&skge_driver);
}
static void __exit skge_exit(void)
{
pci_unregister_driver(&skge_driver);
- remove_proc_entry(SKRootName, NULL);
-
}
module_init(skge_init);
diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c
deleted file mode 100644
index 5cece25c034..00000000000
--- a/drivers/net/sk98lin/skproc.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/******************************************************************************
- *
- * Name: skproc.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.11 $
- * Date: $Date: 2003/12/11 16:03:57 $
- * Purpose: Funktions to display statictic data
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect GmbH.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Created 22-Nov-2000
- * Author: Mirko Lindner (mlindner@syskonnect.de)
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-#include "h/skversion.h"
-
-static int sk_seq_show(struct seq_file *seq, void *v);
-static int sk_proc_open(struct inode *inode, struct file *file);
-
-struct file_operations sk_proc_fops = {
- .owner = THIS_MODULE,
- .open = sk_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-
-/*****************************************************************************
- *
- * sk_seq_show - show proc information of a particular adapter
- *
- * Description:
- * This function fills the proc entry with statistic data about
- * the ethernet device. It invokes the generic sk_gen_browse() to
- * print out all items one per one.
- *
- * Returns: 0
- *
- */
-static int sk_seq_show(struct seq_file *seq, void *v)
-{
- struct net_device *dev = seq->private;
- DEV_NET *pNet = netdev_priv(dev);
- SK_AC *pAC = pNet->pAC;
- SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct;
- unsigned long Flags;
- unsigned int Size;
- char sens_msg[50];
- int t;
- int i;
-
- /* NetIndex in GetStruct is now required, zero is only dummy */
- for (t=pAC->GIni.GIMacsFound; t > 0; t--) {
- if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1)
- t--;
-
- spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- Size = SK_PNMI_STRUCT_SIZE;
-#ifdef SK_DIAG_SUPPORT
- if (pAC->BoardLevel == SK_INIT_DATA) {
- SK_MEMCPY(&(pAC->PnmiStruct), &(pAC->PnmiBackup), sizeof(SK_PNMI_STRUCT_DATA));
- if (pAC->DiagModeActive == DIAG_NOTACTIVE) {
- pAC->Pnmi.DiagAttached = SK_DIAG_IDLE;
- }
- } else {
- SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1);
- }
-#else
- SkPnmiGetStruct(pAC, pAC->IoBase,
- pPnmiStruct, &Size, t-1);
-#endif
- spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
- if (pAC->dev[t-1] == dev) {
- SK_PNMI_STAT *pPnmiStat = &pPnmiStruct->Stat[0];
-
- seq_printf(seq, "\nDetailed statistic for device %s\n",
- pAC->dev[t-1]->name);
- seq_printf(seq, "=======================================\n");
-
- /* Board statistics */
- seq_printf(seq, "\nBoard statistics\n\n");
- seq_printf(seq, "Active Port %c\n",
- 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
- Net[t-1].PrefPort]->PortNumber);
- seq_printf(seq, "Preferred Port %c\n",
- 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt.
- Net[t-1].PrefPort]->PortNumber);
-
- seq_printf(seq, "Bus speed (MHz) %d\n",
- pPnmiStruct->BusSpeed);
-
- seq_printf(seq, "Bus width (Bit) %d\n",
- pPnmiStruct->BusWidth);
- seq_printf(seq, "Driver version %s\n",
- VER_STRING);
- seq_printf(seq, "Hardware revision v%d.%d\n",
- (pAC->GIni.GIPciHwRev >> 4) & 0x0F,
- pAC->GIni.GIPciHwRev & 0x0F);
-
- /* Print sensor informations */
- for (i=0; i < pAC->I2c.MaxSens; i ++) {
- /* Check type */
- switch (pAC->I2c.SenTable[i].SenType) {
- case 1:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (C)");
- seq_printf(seq, "%-25s %d.%02d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue / 10,
- pAC->I2c.SenTable[i].SenValue % 10);
-
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (F)");
- seq_printf(seq, "%-25s %d.%02d\n",
- sens_msg,
- ((((pAC->I2c.SenTable[i].SenValue)
- *10)*9)/5 + 3200)/100,
- ((((pAC->I2c.SenTable[i].SenValue)
- *10)*9)/5 + 3200) % 10);
- break;
- case 2:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (V)");
- seq_printf(seq, "%-25s %d.%03d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue / 1000,
- pAC->I2c.SenTable[i].SenValue % 1000);
- break;
- case 3:
- strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc);
- strcat(sens_msg, " (rpm)");
- seq_printf(seq, "%-25s %d\n",
- sens_msg,
- pAC->I2c.SenTable[i].SenValue);
- break;
- default:
- break;
- }
- }
-
- /*Receive statistics */
- seq_printf(seq, "\nReceive statistics\n\n");
-
- seq_printf(seq, "Received bytes %Lu\n",
- (unsigned long long) pPnmiStat->StatRxOctetsOkCts);
- seq_printf(seq, "Received packets %Lu\n",
- (unsigned long long) pPnmiStat->StatRxOkCts);
-#if 0
- if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC &&
- pAC->HWRevision < 12) {
- pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
- pPnmiStat->StatRxShortsCts;
- pPnmiStat->StatRxShortsCts = 0;
- }
-#endif
- if (dev->mtu > 1500)
- pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts -
- pPnmiStat->StatRxTooLongCts;
-
- seq_printf(seq, "Receive errors %Lu\n",
- (unsigned long long) pPnmiStruct->InErrorsCts);
- seq_printf(seq, "Receive dropped %Lu\n",
- (unsigned long long) pPnmiStruct->RxNoBufCts);
- seq_printf(seq, "Received multicast %Lu\n",
- (unsigned long long) pPnmiStat->StatRxMulticastOkCts);
- seq_printf(seq, "Receive error types\n");
- seq_printf(seq, " length %Lu\n",
- (unsigned long long) pPnmiStat->StatRxRuntCts);
- seq_printf(seq, " buffer overflow %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFifoOverflowCts);
- seq_printf(seq, " bad crc %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFcsCts);
- seq_printf(seq, " framing %Lu\n",
- (unsigned long long) pPnmiStat->StatRxFramingCts);
- seq_printf(seq, " missed frames %Lu\n",
- (unsigned long long) pPnmiStat->StatRxMissedCts);
-
- if (dev->mtu > 1500)
- pPnmiStat->StatRxTooLongCts = 0;
-
- seq_printf(seq, " too long %Lu\n",
- (unsigned long long) pPnmiStat->StatRxTooLongCts);
- seq_printf(seq, " carrier extension %Lu\n",
- (unsigned long long) pPnmiStat->StatRxCextCts);
- seq_printf(seq, " too short %Lu\n",
- (unsigned long long) pPnmiStat->StatRxShortsCts);
- seq_printf(seq, " symbol %Lu\n",
- (unsigned long long) pPnmiStat->StatRxSymbolCts);
- seq_printf(seq, " LLC MAC size %Lu\n",
- (unsigned long long) pPnmiStat->StatRxIRLengthCts);
- seq_printf(seq, " carrier event %Lu\n",
- (unsigned long long) pPnmiStat->StatRxCarrierCts);
- seq_printf(seq, " jabber %Lu\n",
- (unsigned long long) pPnmiStat->StatRxJabberCts);
-
-
- /*Transmit statistics */
- seq_printf(seq, "\nTransmit statistics\n\n");
-
- seq_printf(seq, "Transmited bytes %Lu\n",
- (unsigned long long) pPnmiStat->StatTxOctetsOkCts);
- seq_printf(seq, "Transmited packets %Lu\n",
- (unsigned long long) pPnmiStat->StatTxOkCts);
- seq_printf(seq, "Transmit errors %Lu\n",
- (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
- seq_printf(seq, "Transmit dropped %Lu\n",
- (unsigned long long) pPnmiStruct->TxNoBufCts);
- seq_printf(seq, "Transmit collisions %Lu\n",
- (unsigned long long) pPnmiStat->StatTxSingleCollisionCts);
- seq_printf(seq, "Transmit error types\n");
- seq_printf(seq, " excessive collision %ld\n",
- pAC->stats.tx_aborted_errors);
- seq_printf(seq, " carrier %Lu\n",
- (unsigned long long) pPnmiStat->StatTxCarrierCts);
- seq_printf(seq, " fifo underrun %Lu\n",
- (unsigned long long) pPnmiStat->StatTxFifoUnderrunCts);
- seq_printf(seq, " heartbeat %Lu\n",
- (unsigned long long) pPnmiStat->StatTxCarrierCts);
- seq_printf(seq, " window %ld\n",
- pAC->stats.tx_window_errors);
-
- }
- }
- return 0;
-}
-
-/*****************************************************************************
- *
- * sk_proc_open - register the show function when proc is open'ed
- *
- * Description:
- * This function is called whenever a sk98lin proc file is queried.
- *
- * Returns: the return value of single_open()
- *
- */
-static int sk_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, sk_seq_show, PDE(inode)->data);
-}
-
-/*******************************************************************************
- *
- * End of file
- *
- ******************************************************************************/
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 20:58:17 +0000