diff options
Diffstat (limited to 'drivers')
49 files changed, 1596 insertions, 335 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 00cf9553f74..a442c8f29fc 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -104,6 +104,8 @@ source "drivers/auxdisplay/Kconfig" source "drivers/uio/Kconfig" +source "drivers/vlynq/Kconfig" + source "drivers/xen/Kconfig" source "drivers/staging/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 9e7d4e56c85..00b44f4ccf0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ +obj-$(CONFIG_VLYNQ) += vlynq/ obj-$(CONFIG_STAGING) += staging/ obj-y += platform/ obj-y += ieee802154/ diff --git a/drivers/base/node.c b/drivers/base/node.c index 40b809742a1..91d4087b403 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -72,10 +72,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, "Node %d Inactive(anon): %8lu kB\n" "Node %d Active(file): %8lu kB\n" "Node %d Inactive(file): %8lu kB\n" -#ifdef CONFIG_UNEVICTABLE_LRU "Node %d Unevictable: %8lu kB\n" "Node %d Mlocked: %8lu kB\n" -#endif #ifdef CONFIG_HIGHMEM "Node %d HighTotal: %8lu kB\n" "Node %d HighFree: %8lu kB\n" @@ -105,10 +103,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_INACTIVE_ANON)), nid, K(node_page_state(nid, NR_ACTIVE_FILE)), nid, K(node_page_state(nid, NR_INACTIVE_FILE)), -#ifdef CONFIG_UNEVICTABLE_LRU nid, K(node_page_state(nid, NR_UNEVICTABLE)), nid, K(node_page_state(nid, NR_MLOCK)), -#endif #ifdef CONFIG_HIGHMEM nid, K(i.totalhigh), nid, K(i.freehigh), diff --git a/drivers/char/vt.c b/drivers/char/vt.c index c796a86ab7f..d9113b4c76e 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -171,8 +171,9 @@ int do_poke_blanked_console; int console_blanked; static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */ -static int blankinterval = 10*60*HZ; static int vesa_off_interval; +static int blankinterval = 10*60; +core_param(consoleblank, blankinterval, int, 0444); static DECLARE_WORK(console_work, console_callback); @@ -1485,7 +1486,7 @@ static void setterm_command(struct vc_data *vc) update_attr(vc); break; case 9: /* set blanking interval */ - blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60 * HZ; + blankinterval = ((vc->vc_par[1] < 60) ? vc->vc_par[1] : 60) * 60; poke_blanked_console(); break; case 10: /* set bell frequency in Hz */ @@ -2871,7 +2872,7 @@ static int __init con_init(void) if (blankinterval) { blank_state = blank_normal_wait; - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); } for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { @@ -3677,7 +3678,7 @@ void do_unblank_screen(int leaving_gfx) return; /* but leave console_blanked != 0 */ if (blankinterval) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); blank_state = blank_normal_wait; } @@ -3711,7 +3712,7 @@ void unblank_screen(void) static void blank_screen_t(unsigned long dummy) { if (unlikely(!keventd_up())) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); return; } blank_timer_expired = 1; @@ -3741,7 +3742,7 @@ void poke_blanked_console(void) if (console_blanked) unblank_screen(); else if (blankinterval) { - mod_timer(&console_timer, jiffies + blankinterval); + mod_timer(&console_timer, jiffies + (blankinterval * HZ)); blank_state = blank_normal_wait; } } diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 40bd8c61c7d..72a633a6ec9 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -18,6 +18,7 @@ #include <linux/acpi_pmtmr.h> #include <linux/clocksource.h> +#include <linux/timex.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/pci.h> diff --git a/drivers/eisa/eisa.ids b/drivers/eisa/eisa.ids index ed69837d8b7..6cbb7a51443 100644 --- a/drivers/eisa/eisa.ids +++ b/drivers/eisa/eisa.ids @@ -1140,6 +1140,11 @@ NON0301 "c't Universale Graphic Adapter" NON0401 "c't Universal Ethernet Adapter" NON0501 "c't Universal 16-Bit Sound Adapter" NON0601 "c't Universal 8-Bit Adapter" +NPI0120 "Network Peripherals NP-EISA-1 FDDI Interface" +NPI0221 "Network Peripherals NP-EISA-2 FDDI Interface" +NPI0223 "Network Peripherals NP-EISA-2E Enhanced FDDI Interface" +NPI0301 "Network Peripherals NP-EISA-3 FDDI Interface" +NPI0303 "Network Peripherals NP-EISA-3E Enhanced FDDI Interface" NSS0011 "Newport Systems Solutions WNIC Adapter" NVL0701 "Novell NE3200 Bus Master Ethernet" NVL0702 "Novell NE3200T Bus Master Ethernet" diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 05aa2d406ac..d5ea8a68d33 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -31,8 +31,12 @@ * information is necessary as for the resource tree. */ struct firmware_map_entry { - resource_size_t start; /* start of the memory range */ - resource_size_t end; /* end of the memory range (incl.) */ + /* + * start and end must be u64 rather than resource_size_t, because e820 + * resources can lie at addresses above 4G. + */ + u64 start; /* start of the memory range */ + u64 end; /* end of the memory range (incl.) */ const char *type; /* type of the memory range */ struct list_head list; /* entry for the linked list */ struct kobject kobj; /* kobject for each entry */ @@ -101,7 +105,7 @@ static LIST_HEAD(map_entries); * Common implementation of firmware_map_add() and firmware_map_add_early() * which expects a pre-allocated struct firmware_map_entry. **/ -static int firmware_map_add_entry(resource_size_t start, resource_size_t end, +static int firmware_map_add_entry(u64 start, u64 end, const char *type, struct firmware_map_entry *entry) { @@ -132,8 +136,7 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end, * * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int firmware_map_add(resource_size_t start, resource_size_t end, - const char *type) +int firmware_map_add(u64 start, u64 end, const char *type) { struct firmware_map_entry *entry; @@ -157,8 +160,7 @@ int firmware_map_add(resource_size_t start, resource_size_t end, * * Returns 0 on success, or -ENOMEM if no memory could be allocated. **/ -int __init firmware_map_add_early(resource_size_t start, resource_size_t end, - const char *type) +int __init firmware_map_add_early(u64 start, u64 end, const char *type) { struct firmware_map_entry *entry; diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 0ecf6b76a40..8e28e5993df 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -504,6 +504,14 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, info->fbops = &intelfb_ops; info->fix.line_length = fb->pitch; + + /* setup aperture base/size for vesafb takeover */ + info->aperture_base = dev->mode_config.fb_base; + if (IS_I9XX(dev)) + info->aperture_size = pci_resource_len(dev->pdev, 2); + else + info->aperture_size = pci_resource_len(dev->pdev, 0); + info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset; info->fix.smem_len = size; diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index f8090e137fe..2d5016691d4 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -950,6 +950,7 @@ config SENSORS_HDAPS config SENSORS_LIS3LV02D tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" depends on ACPI && INPUT + select INPUT_POLLDEV select NEW_LEDS select LEDS_CLASS default n @@ -977,6 +978,7 @@ config SENSORS_LIS3LV02D config SENSORS_LIS3_SPI tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" depends on !ACPI && SPI_MASTER && INPUT + select INPUT_POLLDEV default n help This driver provides support for the LIS3LV02Dx accelerometer connected diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index abca7e9f953..6679854c85b 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -27,9 +27,6 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/kthread.h> -#include <linux/semaphore.h> #include <linux/delay.h> #include <linux/wait.h> #include <linux/poll.h> @@ -161,6 +158,7 @@ static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3}; static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; @@ -194,13 +192,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap), AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted), AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), - AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), + AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), + AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), + AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right), /* Intel-based HP Pavilion dv5 */ AXIS_DMI_MATCH2("HPDV5_I", PRODUCT_NAME, "HP Pavilion dv5", @@ -216,7 +217,6 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" - * HP Compaq 8710x Notebook PC / Mobile Workstation * "NC2400" "HP Compaq nc2400" * "NX74x0" "HP Compaq nx74" * "NX6325" "HP Compaq nx6325" @@ -324,7 +324,7 @@ static int lis3lv02d_remove(struct acpi_device *device, int type) flush_work(&hpled_led.work); led_classdev_unregister(&hpled_led.led_classdev); - return lis3lv02d_remove_fs(); + return lis3lv02d_remove_fs(&lis3_dev); } @@ -338,13 +338,7 @@ static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) static int lis3lv02d_resume(struct acpi_device *device) { - /* put back the device in the right state (ACPI might turn it on) */ - mutex_lock(&lis3_dev.lock); - if (lis3_dev.usage > 0) - lis3lv02d_poweron(&lis3_dev); - else - lis3lv02d_poweroff(&lis3_dev); - mutex_unlock(&lis3_dev.lock); + lis3lv02d_poweron(&lis3_dev); return 0; } #else diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 778eb779598..271338bdb6b 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -27,9 +27,7 @@ #include <linux/types.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/kthread.h> -#include <linux/semaphore.h> +#include <linux/input-polldev.h> #include <linux/delay.h> #include <linux/wait.h> #include <linux/poll.h> @@ -105,56 +103,39 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) { int position[3]; - position[0] = lis3_dev.read_data(lis3, OUTX); - position[1] = lis3_dev.read_data(lis3, OUTY); - position[2] = lis3_dev.read_data(lis3, OUTZ); + position[0] = lis3->read_data(lis3, OUTX); + position[1] = lis3->read_data(lis3, OUTY); + position[2] = lis3->read_data(lis3, OUTZ); - *x = lis3lv02d_get_axis(lis3_dev.ac.x, position); - *y = lis3lv02d_get_axis(lis3_dev.ac.y, position); - *z = lis3lv02d_get_axis(lis3_dev.ac.z, position); + *x = lis3lv02d_get_axis(lis3->ac.x, position); + *y = lis3lv02d_get_axis(lis3->ac.y, position); + *z = lis3lv02d_get_axis(lis3->ac.z, position); } void lis3lv02d_poweroff(struct lis3lv02d *lis3) { - lis3_dev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3->write(lis3, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(struct lis3lv02d *lis3) { - lis3_dev.is_on = 1; - lis3_dev.init(lis3); -} -EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + u8 reg; -/* - * To be called before starting to use the device. It makes sure that the - * device will always be on until a call to lis3lv02d_decrease_use(). Not to be - * used from interrupt context. - */ -static void lis3lv02d_increase_use(struct lis3lv02d *dev) -{ - mutex_lock(&dev->lock); - dev->usage++; - if (dev->usage == 1) { - if (!dev->is_on) - lis3lv02d_poweron(dev); - } - mutex_unlock(&dev->lock); -} + lis3->init(lis3); -/* - * To be called whenever a usage of the device is stopped. - * It will make sure to turn off the device when there is not usage. - */ -static void lis3lv02d_decrease_use(struct lis3lv02d *dev) -{ - mutex_lock(&dev->lock); - dev->usage--; - if (dev->usage == 0) - lis3lv02d_poweroff(dev); - mutex_unlock(&dev->lock); + /* + * Common configuration + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + */ + lis3->read(lis3, CTRL_REG2, ®); + reg |= CTRL2_BDU; + lis3->write(lis3, CTRL_REG2, reg); } +EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + static irqreturn_t lis302dl_interrupt(int irq, void *dummy) { @@ -198,15 +179,12 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file) printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq); return -EBUSY; } - lis3lv02d_increase_use(&lis3_dev); - printk("lis3: registered interrupt %d\n", lis3_dev.irq); return 0; } static int lis3lv02d_misc_release(struct inode *inode, struct file *file) { fasync_helper(-1, file, 0, &lis3_dev.async_queue); - lis3lv02d_decrease_use(&lis3_dev); free_irq(lis3_dev.irq, &lis3_dev); clear_bit(0, &lis3_dev.misc_opened); /* release the device */ return 0; @@ -290,46 +268,16 @@ static struct miscdevice lis3lv02d_misc_device = { .fops = &lis3lv02d_misc_fops, }; -/** - * lis3lv02d_joystick_kthread - Kthread polling function - * @data: unused - here to conform to threadfn prototype - */ -static int lis3lv02d_joystick_kthread(void *data) +static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) { int x, y, z; - while (!kthread_should_stop()) { - lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib); - input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib); - input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib); - - input_sync(lis3_dev.idev); - - try_to_freeze(); - msleep_interruptible(MDPS_POLL_INTERVAL); - } - - return 0; -} - -static int lis3lv02d_joystick_open(struct input_dev *input) -{ - lis3lv02d_increase_use(&lis3_dev); - lis3_dev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); - if (IS_ERR(lis3_dev.kthread)) { - lis3lv02d_decrease_use(&lis3_dev); - return PTR_ERR(lis3_dev.kthread); - } - - return 0; + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib); + input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib); + input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib); } -static void lis3lv02d_joystick_close(struct input_dev *input) -{ - kthread_stop(lis3_dev.kthread); - lis3lv02d_decrease_use(&lis3_dev); -} static inline void lis3lv02d_calibrate_joystick(void) { @@ -339,33 +287,36 @@ static inline void lis3lv02d_calibrate_joystick(void) int lis3lv02d_joystick_enable(void) { + struct input_dev *input_dev; int err; if (lis3_dev.idev) return -EINVAL; - lis3_dev.idev = input_allocate_device(); + lis3_dev.idev = input_allocate_polled_device(); if (!lis3_dev.idev) return -ENOMEM; + lis3_dev.idev->poll = lis3lv02d_joystick_poll; + lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; + input_dev = lis3_dev.idev->input; + lis3lv02d_calibrate_joystick(); - lis3_dev.idev->name = "ST LIS3LV02DL Accelerometer"; - lis3_dev.idev->phys = DRIVER_NAME "/input0"; - lis3_dev.idev->id.bustype = BUS_HOST; - lis3_dev.idev->id.vendor = 0; - lis3_dev.idev->dev.parent = &lis3_dev.pdev->dev; - lis3_dev.idev->open = lis3lv02d_joystick_open; - lis3_dev.idev->close = lis3lv02d_joystick_close; + input_dev->name = "ST LIS3LV02DL Accelerometer"; + input_dev->phys = DRIVER_NAME "/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0; + input_dev->dev.parent = &lis3_dev.pdev->dev; - set_bit(EV_ABS, lis3_dev.idev->evbit); - input_set_abs_params(lis3_dev.idev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - input_set_abs_params(lis3_dev.idev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - input_set_abs_params(lis3_dev.idev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + input_set_abs_params(input_dev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); + input_set_abs_params(input_dev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3); - err = input_register_device(lis3_dev.idev); + err = input_register_polled_device(lis3_dev.idev); if (err) { - input_free_device(lis3_dev.idev); + input_free_polled_device(lis3_dev.idev); lis3_dev.idev = NULL; } @@ -378,8 +329,9 @@ void lis3lv02d_joystick_disable(void) if (!lis3_dev.idev) return; - misc_deregister(&lis3lv02d_misc_device); - input_unregister_device(lis3_dev.idev); + if (lis3_dev.irq) + misc_deregister(&lis3lv02d_misc_device); + input_unregister_polled_device(lis3_dev.idev); lis3_dev.idev = NULL; } EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); @@ -390,9 +342,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev, { int x, y, z; - lis3lv02d_increase_use(&lis3_dev); lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); - lis3lv02d_decrease_use(&lis3_dev); return sprintf(buf, "(%d,%d,%d)\n", x, y, z); } @@ -406,9 +356,7 @@ static ssize_t lis3lv02d_calibrate_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - lis3lv02d_increase_use(&lis3_dev); lis3lv02d_calibrate_joystick(); - lis3lv02d_decrease_use(&lis3_dev); return count; } @@ -420,9 +368,7 @@ static ssize_t lis3lv02d_rate_show(struct device *dev, u8 ctrl; int val; - lis3lv02d_increase_use(&lis3_dev); lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); - lis3lv02d_decrease_use(&lis3_dev); val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); } @@ -446,17 +392,17 @@ static struct attribute_group lis3lv02d_attribute_group = { static int lis3lv02d_add_fs(struct lis3lv02d *lis3) { - lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); - if (IS_ERR(lis3_dev.pdev)) - return PTR_ERR(lis3_dev.pdev); + lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(lis3->pdev)) + return PTR_ERR(lis3->pdev); - return sysfs_create_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group); + return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); } -int lis3lv02d_remove_fs(void) +int lis3lv02d_remove_fs(struct lis3lv02d *lis3) { - sysfs_remove_group(&lis3_dev.pdev->dev.kobj, &lis3lv02d_attribute_group); - platform_device_unregister(lis3_dev.pdev); + sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(lis3->pdev); return 0; } EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); @@ -482,18 +428,35 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) break; default: printk(KERN_ERR DRIVER_NAME - ": unknown sensor type 0x%X\n", lis3_dev.whoami); + ": unknown sensor type 0x%X\n", dev->whoami); return -EINVAL; } - mutex_init(&dev->lock); lis3lv02d_add_fs(dev); - lis3lv02d_increase_use(dev); + lis3lv02d_poweron(dev); if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); - printk("lis3_init_device: irq %d\n", dev->irq); + /* passing in platform specific data is purely optional and only + * used by the SPI transport layer at the moment */ + if (dev->pdata) { + struct lis3lv02d_platform_data *p = dev->pdata; + + if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) { + dev->write(dev, CLICK_CFG, p->click_flags); + dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); + dev->write(dev, CLICK_LATENCY, p->click_latency); + dev->write(dev, CLICK_WINDOW, p->click_window); + dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); + dev->write(dev, CLICK_THSY_X, + (p->click_thresh_x & 0xf) | + (p->click_thresh_y << 4)); + } + + if (p->irq_cfg) + dev->write(dev, CTRL_REG3, p->irq_cfg); + } /* bail if we did not get an IRQ from the bus layer */ if (!dev->irq) { @@ -502,11 +465,9 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) goto out; } - printk("lis3: registering device\n"); if (misc_register(&lis3lv02d_misc_device)) printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); out: - lis3lv02d_decrease_use(dev); return 0; } EXPORT_SYMBOL_GPL(lis3lv02d_init_device); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 745ec96806d..e320e2f511f 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -18,6 +18,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/platform_device.h> +#include <linux/input-polldev.h> /* * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to @@ -27,12 +29,14 @@ * They can also be connected via I²C. */ +#include <linux/lis3lv02d.h> + /* 2-byte registers */ #define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */ /* 1-byte registers */ #define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */ -enum lis3lv02d_reg { +enum lis3_reg { WHO_AM_I = 0x0F, OFFSET_X = 0x16, OFFSET_Y = 0x17, @@ -60,6 +64,19 @@ enum lis3lv02d_reg { FF_WU_THS_L = 0x34, FF_WU_THS_H = 0x35, FF_WU_DURATION = 0x36, +}; + +enum lis302d_reg { + CLICK_CFG = 0x38, + CLICK_SRC = 0x39, + CLICK_THSY_X = 0x3B, + CLICK_THSZ = 0x3C, + CLICK_TIMELIMIT = 0x3D, + CLICK_LATENCY = 0x3E, + CLICK_WINDOW = 0x3F, +}; + +enum lis3lv02d_reg { DD_CFG = 0x38, DD_SRC = 0x39, DD_ACK = 0x3A, @@ -169,22 +186,20 @@ struct lis3lv02d { s16 (*read_data) (struct lis3lv02d *lis3, int reg); int mdps_max_val; - struct input_dev *idev; /* input device */ - struct task_struct *kthread; /* kthread for input */ - struct mutex lock; + struct input_polled_dev *idev; /* input device */ struct platform_device *pdev; /* platform device */ atomic_t count; /* interrupt count after last read */ int xcalib; /* calibrated null value for x */ int ycalib; /* calibrated null value for y */ int zcalib; /* calibrated null value for z */ - unsigned char is_on; /* whether the device is on or off */ - unsigned char usage; /* usage counter */ struct axis_conversion ac; /* hw -> logical axis */ u32 irq; /* IRQ number */ struct fasync_struct *async_queue; /* queue for the misc device */ wait_queue_head_t misc_wait; /* Wait queue for the misc device */ unsigned long misc_opened; /* bit0: whether the device is open */ + + struct lis3lv02d_platform_data *pdata; /* for passing board config */ }; int lis3lv02d_init_device(struct lis3lv02d *lis3); @@ -192,6 +207,6 @@ int lis3lv02d_joystick_enable(void); void lis3lv02d_joystick_disable(void); void lis3lv02d_poweroff(struct lis3lv02d *lis3); void lis3lv02d_poweron(struct lis3lv02d *lis3); -int lis3lv02d_remove_fs(void); +int lis3lv02d_remove_fs(struct lis3lv02d *lis3); extern struct lis3lv02d lis3_dev; diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c index 07ae74b0e19..3827ff04485 100644 --- a/drivers/hwmon/lis3lv02d_spi.c +++ b/drivers/hwmon/lis3lv02d_spi.c @@ -72,6 +72,7 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi) lis3_dev.write = lis3_spi_write; lis3_dev.irq = spi->irq; lis3_dev.ac = lis3lv02d_axis_normal; + lis3_dev.pdata = spi->dev.platform_data; spi_set_drvdata(spi, &lis3_dev); ret = lis3lv02d_init_device(&lis3_dev); diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 356b3a25efa..1c0b529c06a 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -35,7 +35,7 @@ #include <linux/input.h> #include <linux/gameport.h> #include <linux/jiffies.h> -#include <asm/timex.h> +#include <linux/timex.h> #define DRIVER_DESC "Analog joystick and gamepad driver" diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index d6a30cee7bc..6d67af5387a 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/platform_device.h> +#include <linux/timex.h> #include <asm/io.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index 6109fb5f34e..0c29a019bc8 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/pagemap.h> #include <linux/dma-mapping.h> #include <media/videobuf-dma-contig.h> @@ -25,6 +26,7 @@ struct videobuf_dma_contig_memory { void *vaddr; dma_addr_t dma_handle; unsigned long size; + int is_userptr; }; #define MAGIC_DC_MEM 0x0733ac61 @@ -108,6 +110,82 @@ static struct vm_operations_struct videobuf_vm_ops = { .close = videobuf_vm_close, }; +/** + * videobuf_dma_contig_user_put() - reset pointer to user space buffer + * @mem: per-buffer private videobuf-dma-contig data + * + * This function resets the user space pointer + */ +static void videobuf_dma_contig_user_put(struct videobuf_dma_contig_memory *mem) +{ + mem->is_userptr = 0; + mem->dma_handle = 0; + mem->size = 0; +} + +/** + * videobuf_dma_contig_user_get() - setup user space memory pointer + * @mem: per-buffer private videobuf-dma-contig data + * @vb: video buffer to map + * + * This function validates and sets up a pointer to user space memory. + * Only physically contiguous pfn-mapped memory is accepted. + * + * Returns 0 if successful. + */ +static int videobuf_dma_contig_user_get(struct videobuf_dma_contig_memory *mem, + struct videobuf_buffer *vb) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long prev_pfn, this_pfn; + unsigned long pages_done, user_address; + int ret; + + mem->size = PAGE_ALIGN(vb->size); + mem->is_userptr = 0; + ret = -EINVAL; + + down_read(&mm->mmap_sem); + + vma = find_vma(mm, vb->baddr); + if (!vma) + goto out_up; + + if ((vb->baddr + mem->size) > vma->vm_end) + goto out_up; + + pages_done = 0; + prev_pfn = 0; /* kill warning */ + user_address = vb->baddr; + + while (pages_done < (mem->size >> PAGE_SHIFT)) { + ret = follow_pfn(vma, user_address, &this_pfn); + if (ret) + break; + + if (pages_done == 0) + mem->dma_handle = this_pfn << PAGE_SHIFT; + else if (this_pfn != (prev_pfn + 1)) + ret = -EFAULT; + + if (ret) + break; + + prev_pfn = this_pfn; + user_address += PAGE_SIZE; + pages_done++; + } + + if (!ret) + mem->is_userptr = 1; + + out_up: + up_read(¤t->mm->mmap_sem); + + return ret; +} + static void *__videobuf_alloc(size_t size) { struct videobuf_dma_contig_memory *mem; @@ -154,12 +232,11 @@ static int __videobuf_iolock(struct videobuf_queue *q, case V4L2_MEMORY_USERPTR: dev_dbg(q->dev, "%s memory method USERPTR\n", __func__); - /* The only USERPTR currently supported is the one needed for - read() method. - */ + /* handle pointer from user space */ if (vb->baddr) - return -EINVAL; + return videobuf_dma_contig_user_get(mem, vb); + /* allocate memory for the read() method */ mem->size = PAGE_ALIGN(vb->size); mem->vaddr = dma_alloc_coherent(q->dev, mem->size, &mem->dma_handle, GFP_KERNEL); @@ -400,7 +477,7 @@ void videobuf_dma_contig_free(struct videobuf_queue *q, So, it should free memory only if the memory were allocated for read() operation. */ - if ((buf->memory != V4L2_MEMORY_USERPTR) || buf->baddr) + if (buf->memory != V4L2_MEMORY_USERPTR) return; if (!mem) @@ -408,6 +485,13 @@ void videobuf_dma_contig_free(struct videobuf_queue *q, MAGIC_CHECK(mem->magic, MAGIC_DC_MEM); + /* handle user space pointer case */ + if (buf->baddr) { + videobuf_dma_contig_user_put(mem); + return; + } + + /* read() method */ dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle); mem->vaddr = NULL; } diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index bbefe77c67a..3ce2920e2bf 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -302,7 +302,7 @@ static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr) pnode = uv_node_to_pnode(nid); if (bid < 0 || gru_base[bid]) continue; - page = alloc_pages_node(nid, GFP_KERNEL, order); + page = alloc_pages_exact_node(nid, GFP_KERNEL, order); if (!page) goto fail; gru_base[bid] = page_address(page); diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 9172fcdee4e..c76677afda1 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -232,7 +232,7 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpu, char *irq_name, mq->mmr_blade = uv_cpu_to_blade_id(cpu); nid = cpu_to_node(cpu); - page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + page = alloc_pages_exact_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, pg_order); if (page == NULL) { dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 1703b20cad5..6095f8daecd 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -915,12 +915,9 @@ static int ds_ioctl(struct inode * inode, struct file * file, err = -EPERM; goto free_out; } else { - static int printed = 0; - if (!printed) { - printk(KERN_WARNING "2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n"); - printk(KERN_WARNING "MTD handling any more.\n"); - printed++; - } + printk_once(KERN_WARNING + "2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n"); + printk_once(KERN_WARNING "MTD handling any more.\n"); } err = -EINVAL; goto free_out; diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index f4573a96af2..a32ccb44065 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -711,12 +711,12 @@ static int of_mpc83xx_spi_get_chipselects(struct device *dev) return 0; } - pinfo->gpios = kmalloc(ngpios * sizeof(pinfo->gpios), GFP_KERNEL); + pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL); if (!pinfo->gpios) return -ENOMEM; - memset(pinfo->gpios, -1, ngpios * sizeof(pinfo->gpios)); + memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios)); - pinfo->alow_flags = kzalloc(ngpios * sizeof(pinfo->alow_flags), + pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags), GFP_KERNEL); if (!pinfo->alow_flags) { ret = -ENOMEM; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2b5a691064b..932ffdbf86d 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2104,6 +2104,7 @@ config FB_MB862XX_LIME bool "Lime GDC" depends on FB_MB862XX depends on OF && !FB_MB862XX_PCI_GDC + depends on PPC select FB_FOREIGN_ENDIAN select FB_LITTLE_ENDIAN ---help--- diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c index 6995fe1e86d..0bcc59eb37f 100644 --- a/drivers/video/acornfb.c +++ b/drivers/video/acornfb.c @@ -859,43 +859,6 @@ acornfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } -/* - * Note that we are entered with the kernel locked. - */ -static int -acornfb_mmap(struct fb_info *info, struct vm_area_struct *vma) -{ - unsigned long off, start; - u32 len; - - off = vma->vm_pgoff << PAGE_SHIFT; - - start = info->fix.smem_start; - len = PAGE_ALIGN(start & ~PAGE_MASK) + info->fix.smem_len; - start &= PAGE_MASK; - if ((vma->vm_end - vma->vm_start + off) > len) - return -EINVAL; - off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; - - /* This is an IO map - tell maydump to skip this VMA */ - vma->vm_flags |= VM_IO; - - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); - - /* - * Don't alter the page protection flags; we want to keep the area - * cached for better performance. This does mean that we may miss - * some updates to the screen occasionally, but process switches - * should cause the caches and buffers to be flushed often enough. - */ - if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) - return -EAGAIN; - return 0; -} - static struct fb_ops acornfb_ops = { .owner = THIS_MODULE, .fb_check_var = acornfb_check_var, @@ -905,7 +868,6 @@ static struct fb_ops acornfb_ops = { .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, - .fb_mmap = acornfb_mmap, }; /* diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 2fb63f6ea2f..5afd64482f5 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -345,7 +345,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel); dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz); - if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) { + if (PICOS2KHZ(var->pixclock) > clk_value_khz) { dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock)); return -EINVAL; } diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 97a1f095f32..515cf1978d1 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -213,7 +213,6 @@ static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo) PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb | PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb | PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | - PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF); OUTPLL(pllPIXCLKS_CNTL, tmp); @@ -395,7 +394,7 @@ static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb | PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb | PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | - PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb); + PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb); OUTPLL(pllPIXCLKS_CNTL, tmp); tmp = INPLL(pllMCLK_MISC); diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 37e60b1d2ed..e49ae5edcc0 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -323,7 +323,6 @@ static int bfin_bf54x_fb_release(struct fb_info *info, int user) bfin_write_EPPI0_CONTROL(0); SSYNC(); disable_dma(CH_EPPI0); - memset(fbi->fb_buffer, 0, info->fix.smem_len); } spin_unlock(&fbi->lock); @@ -530,7 +529,7 @@ static irqreturn_t bfin_bf54x_irq_error(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init bfin_bf54x_probe(struct platform_device *pdev) +static int __devinit bfin_bf54x_probe(struct platform_device *pdev) { struct bfin_bf54xfb_info *info; struct fb_info *fbinfo; @@ -626,14 +625,12 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev) goto out3; } - memset(info->fb_buffer, 0, fbinfo->fix.smem_len); - fbinfo->screen_base = (void *)info->fb_buffer; fbinfo->fix.smem_start = (int)info->fb_buffer; fbinfo->fbops = &bfin_bf54x_fb_ops; - fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); + fbinfo->pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL); if (!fbinfo->pseudo_palette) { printk(KERN_ERR DRIVER_NAME "Fail to allocate pseudo_palette\n"); @@ -642,8 +639,6 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev) goto out4; } - memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16); - if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) < 0) { printk(KERN_ERR DRIVER_NAME @@ -712,7 +707,7 @@ out1: return ret; } -static int bfin_bf54x_remove(struct platform_device *pdev) +static int __devexit bfin_bf54x_remove(struct platform_device *pdev) { struct fb_info *fbinfo = platform_get_drvdata(pdev); @@ -781,7 +776,7 @@ static int bfin_bf54x_resume(struct platform_device *pdev) static struct platform_driver bfin_bf54x_driver = { .probe = bfin_bf54x_probe, - .remove = bfin_bf54x_remove, + .remove = __devexit_p(bfin_bf54x_remove), .suspend = bfin_bf54x_suspend, .resume = bfin_bf54x_resume, .driver = { @@ -790,7 +785,7 @@ static struct platform_driver bfin_bf54x_driver = { }, }; -static int __devinit bfin_bf54x_driver_init(void) +static int __init bfin_bf54x_driver_init(void) { return platform_driver_register(&bfin_bf54x_driver); } diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index 90cfddabf1f..5cc36cfbf07 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -242,7 +242,6 @@ static int bfin_t350mcqb_fb_release(struct fb_info *info, int user) SSYNC(); disable_dma(CH_PPI); bfin_t350mcqb_stop_timers(); - memset(fbi->fb_buffer, 0, info->fix.smem_len); } spin_unlock(&fbi->lock); @@ -527,8 +526,6 @@ static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev) goto out3; } - memset(info->fb_buffer, 0, fbinfo->fix.smem_len); - fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; @@ -602,7 +599,7 @@ out1: return ret; } -static int bfin_t350mcqb_remove(struct platform_device *pdev) +static int __devexit bfin_t350mcqb_remove(struct platform_device *pdev) { struct fb_info *fbinfo = platform_get_drvdata(pdev); @@ -637,9 +634,6 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state) { - struct fb_info *fbinfo = platform_get_drvdata(pdev); - struct bfin_t350mcqbfb_info *info = fbinfo->par; - bfin_t350mcqb_disable_ppi(); disable_dma(CH_PPI); bfin_write_PPI_STATUS(0xFFFF); @@ -649,9 +643,6 @@ static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t stat static int bfin_t350mcqb_resume(struct platform_device *pdev) { - struct fb_info *fbinfo = platform_get_drvdata(pdev); - struct bfin_t350mcqbfb_info *info = fbinfo->par; - enable_dma(CH_PPI); bfin_t350mcqb_enable_ppi(); @@ -664,7 +655,7 @@ static int bfin_t350mcqb_resume(struct platform_device *pdev) static struct platform_driver bfin_t350mcqb_driver = { .probe = bfin_t350mcqb_probe, - .remove = bfin_t350mcqb_remove, + .remove = __devexit_p(bfin_t350mcqb_remove), .suspend = bfin_t350mcqb_suspend, .resume = bfin_t350mcqb_resume, .driver = { @@ -673,7 +664,7 @@ static struct platform_driver bfin_t350mcqb_driver = { }, }; -static int __devinit bfin_t350mcqb_driver_init(void) +static int __init bfin_t350mcqb_driver_init(void) { return platform_driver_register(&bfin_t350mcqb_driver); } diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c index c7ff3c1a266..0c02f8ec4bf 100644 --- a/drivers/video/carminefb.c +++ b/drivers/video/carminefb.c @@ -562,7 +562,7 @@ static int __devinit alloc_carmine_fb(void __iomem *regs, void __iomem *smem_bas if (ret < 0) goto err_free_fb; - if (fb_mode > ARRAY_SIZE(carmine_modedb)) + if (fb_mode >= ARRAY_SIZE(carmine_modedb)) fb_mode = CARMINEFB_DEFAULT_VIDEO_MODE; par->cur_mode = par->new_mode = ~0; diff --git a/drivers/video/chipsfb.c b/drivers/video/chipsfb.c index 777389c4098..57b9d276497 100644 --- a/drivers/video/chipsfb.c +++ b/drivers/video/chipsfb.c @@ -414,7 +414,6 @@ chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) } pci_set_drvdata(dp, p); - p->device = &dp->dev; init_chips(p, addr); diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c index 8dea2bc9270..eb12182b205 100644 --- a/drivers/video/efifb.c +++ b/drivers/video/efifb.c @@ -280,6 +280,9 @@ static int __init efifb_probe(struct platform_device *dev) info->pseudo_palette = info->par; info->par = NULL; + info->aperture_base = efifb_fix.smem_start; + info->aperture_size = size_total; + info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len); if (!info->screen_base) { printk(KERN_ERR "efifb: abort, cannot ioremap video memory " @@ -337,7 +340,7 @@ static int __init efifb_probe(struct platform_device *dev) info->fbops = &efifb_ops; info->var = efifb_defined; info->fix = efifb_fix; - info->flags = FBINFO_FLAG_DEFAULT; + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE; if ((err = fb_alloc_cmap(&info->cmap, 256, 0)) < 0) { printk(KERN_ERR "efifb: cannot allocate colormap\n"); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index d412a1ddc12..f8a09bf8d0c 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1462,6 +1462,16 @@ static int fb_check_foreignness(struct fb_info *fi) return 0; } +static bool fb_do_apertures_overlap(struct fb_info *gen, struct fb_info *hw) +{ + /* is the generic aperture base the same as the HW one */ + if (gen->aperture_base == hw->aperture_base) + return true; + /* is the generic aperture base inside the hw base->hw base+size */ + if (gen->aperture_base > hw->aperture_base && gen->aperture_base <= hw->aperture_base + hw->aperture_size) + return true; + return false; +} /** * register_framebuffer - registers a frame buffer device * @fb_info: frame buffer info structure @@ -1485,6 +1495,23 @@ register_framebuffer(struct fb_info *fb_info) if (fb_check_foreignness(fb_info)) return -ENOSYS; + /* check all firmware fbs and kick off if the base addr overlaps */ + for (i = 0 ; i < FB_MAX; i++) { + if (!registered_fb[i]) + continue; + + if (registered_fb[i]->flags & FBINFO_MISC_FIRMWARE) { + if (fb_do_apertures_overlap(registered_fb[i], fb_info)) { + printk(KERN_ERR "fb: conflicting fb hw usage " + "%s vs %s - removing generic driver\n", + fb_info->fix.id, + registered_fb[i]->fix.id); + unregister_framebuffer(registered_fb[i]); + break; + } + } + } + num_registered_fb++; for (i = 0 ; i < FB_MAX; i++) if (!registered_fb[i]) @@ -1586,6 +1613,10 @@ unregister_framebuffer(struct fb_info *fb_info) device_destroy(fb_class, MKDEV(FB_MAJOR, i)); event.info = fb_info; fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event); + + /* this may free fb info */ + if (fb_info->fbops->fb_destroy) + fb_info->fbops->fb_destroy(fb_info); done: return ret; } diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c index 3a81060137a..15d20010944 100644 --- a/drivers/video/igafb.c +++ b/drivers/video/igafb.c @@ -395,17 +395,16 @@ int __init igafb_init(void) /* We leak a reference here but as it cannot be unloaded this is fine. If you write unload code remember to free it in unload */ - size = sizeof(struct fb_info) + sizeof(struct iga_par) + sizeof(u32)*16; + size = sizeof(struct iga_par) + sizeof(u32)*16; - info = kzalloc(size, GFP_ATOMIC); + info = framebuffer_alloc(size, &pdev->dev); if (!info) { printk("igafb_init: can't alloc fb_info\n"); pci_dev_put(pdev); return -ENOMEM; } - par = (struct iga_par *) (info + 1); - + par = info->par; if ((addr = pdev->resource[0].start) == 0) { printk("igafb_init: no memory start\n"); @@ -526,7 +525,6 @@ int __init igafb_init(void) info->var = default_var; info->fix = igafb_fix; info->pseudo_palette = (void *)(par + 1); - info->device = &pdev->dev; if (!iga_init(info, par)) { iounmap((void *)par->io_base); diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index ace14fe02fc..0cafd642fbc 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -1365,6 +1365,11 @@ static int intelfb_set_par(struct fb_info *info) DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres, info->var.yres, info->var.bits_per_pixel); + /* + * Disable VCO prior to timing register change. + */ + OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE); + intelfb_blank(FB_BLANK_POWERDOWN, info); if (ACCEL(dinfo, info)) diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile index b91251d1fe4..3b437813584 100644 --- a/drivers/video/logo/Makefile +++ b/drivers/video/logo/Makefile @@ -37,22 +37,24 @@ extra-y += $(call logo-cfiles,_clut224,ppm) # Gray 256 extra-y += $(call logo-cfiles,_gray256,pgm) +pnmtologo := scripts/pnmtologo + # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..." quiet_cmd_logo = LOGO $@ - cmd_logo = scripts/pnmtologo \ + cmd_logo = $(pnmtologo) \ -t $(patsubst $*_%,%,$(notdir $(basename $<))) \ -n $(notdir $(basename $<)) -o $@ $< -$(obj)/%_mono.c: $(src)/%_mono.pbm FORCE +$(obj)/%_mono.c: $(src)/%_mono.pbm $(pnmtologo) FORCE $(call if_changed,logo) -$(obj)/%_vga16.c: $(src)/%_vga16.ppm FORCE +$(obj)/%_vga16.c: $(src)/%_vga16.ppm $(pnmtologo) FORCE $(call if_changed,logo) -$(obj)/%_clut224.c: $(src)/%_clut224.ppm FORCE +$(obj)/%_clut224.c: $(src)/%_clut224.ppm $(pnmtologo) FORCE $(call if_changed,logo) -$(obj)/%_gray256.c: $(src)/%_gray256.pgm FORCE +$(obj)/%_gray256.c: $(src)/%_gray256.pgm $(pnmtologo) FORCE $(call if_changed,logo) # Files generated that shall be removed upon make clean diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index 2e85a2b52d0..ea7a8ccc830 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -21,21 +21,6 @@ #include <asm/bootinfo.h> #endif -extern const struct linux_logo logo_linux_mono; -extern const struct linux_logo logo_linux_vga16; -extern const struct linux_logo logo_linux_clut224; -extern const struct linux_logo logo_blackfin_vga16; -extern const struct linux_logo logo_blackfin_clut224; -extern const struct linux_logo logo_dec_clut224; -extern const struct linux_logo logo_mac_clut224; -extern const struct linux_logo logo_parisc_clut224; -extern const struct linux_logo logo_sgi_clut224; -extern const struct linux_logo logo_sun_clut224; -extern const struct linux_logo logo_superh_mono; -extern const struct linux_logo logo_superh_vga16; -extern const struct linux_logo logo_superh_clut224; -extern const struct linux_logo logo_m32r_clut224; - static int nologo; module_param(nologo, bool, 0); MODULE_PARM_DESC(nologo, "Disables startup logo"); diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index fb64234a382..a28e3cfbbf7 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -19,7 +19,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/pci.h> -#if defined(CONFIG_PPC_OF) +#if defined(CONFIG_OF) #include <linux/of_platform.h> #endif #include "mb862xxfb.h" diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 16186240c5f..34e4e799516 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -264,6 +264,14 @@ static const struct fb_videomode modedb[] = { /* 1280x800, 60 Hz, 47.403 kHz hsync, WXGA 16:10 aspect ratio */ NULL, 60, 1280, 800, 12048, 200, 64, 24, 1, 136, 3, 0, FB_VMODE_NONINTERLACED + }, { + /* 720x576i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */ + NULL, 50, 720, 576, 74074, 64, 16, 39, 5, 64, 5, + 0, FB_VMODE_INTERLACED + }, { + /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */ + NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5, + 0, FB_VMODE_INTERLACED }, }; diff --git a/drivers/video/offb.c b/drivers/video/offb.c index e1d9eeb1aea..4d8c54c23dd 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -378,7 +378,6 @@ static void __init offb_init_fb(const char *name, const char *full_name, struct fb_fix_screeninfo *fix; struct fb_var_screeninfo *var; struct fb_info *info; - int size; if (!request_mem_region(res_start, res_size, "offb")) return; @@ -393,15 +392,12 @@ static void __init offb_init_fb(const char *name, const char *full_name, return; } - size = sizeof(struct fb_info) + sizeof(u32) * 16; - - info = kmalloc(size, GFP_ATOMIC); + info = framebuffer_alloc(sizeof(u32) * 16, NULL); if (info == 0) { release_mem_region(res_start, res_size); return; } - memset(info, 0, size); fix = &info->fix; var = &info->var; @@ -497,7 +493,7 @@ static void __init offb_init_fb(const char *name, const char *full_name, iounmap(par->cmap_adr); par->cmap_adr = NULL; iounmap(info->screen_base); - kfree(info); + framebuffer_release(info); release_mem_region(res_start, res_size); return; } diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index c6dd924976a..36436ee6c1a 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -1748,7 +1748,7 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); fb_dealloc_cmap(&info->cmap); kfree(info->pixmap.addr); - kfree(info); + framebuffer_release(info); } static struct pci_device_id pm2fb_id_table[] = { diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 0726aecf3b7..0deb0a8867b 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -2,6 +2,7 @@ * * (c) 2004 Simtec Electronics * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org> + * (c) 2009 Kristoffer Ericson <kristoffer.ericson@gmail.com> * * Driver for Epson S1D13xxx series framebuffer chips * @@ -10,18 +11,10 @@ * linux/drivers/video/epson1355fb.c * linux/drivers/video/epson/s1d13xxxfb.c (2.4 driver by Epson) * - * Note, currently only tested on S1D13806 with 16bit CRT. - * As such, this driver might still contain some hardcoded bits relating to - * S1D13806. - * Making it work on other S1D13XXX chips should merely be a matter of adding - * a few switch()s, some missing glue here and there maybe, and split header - * files. - * * TODO: - handle dual screen display (CRT and LCD at the same time). * - check_var(), mode change, etc. - * - PM untested. - * - Accelerated interfaces. - * - Probably not SMP safe :) + * - probably not SMP safe :) + * - support all bitblt operations on all cards * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for @@ -31,19 +24,24 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/delay.h> - #include <linux/types.h> #include <linux/errno.h> #include <linux/mm.h> #include <linux/mman.h> #include <linux/fb.h> +#include <linux/spinlock_types.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <video/s1d13xxxfb.h> -#define PFX "s1d13xxxfb: " +#define PFX "s1d13xxxfb: " +#define BLIT "s1d13xxxfb_bitblt: " +/* + * set this to enable debugging on general functions + */ #if 0 #define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0) #else @@ -51,7 +49,21 @@ #endif /* - * List of card production ids + * set this to enable debugging on 2D acceleration + */ +#if 0 +#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0) +#else +#define dbg_blit(fmt, args...) do { } while (0) +#endif + +/* + * we make sure only one bitblt operation is running + */ +static DEFINE_SPINLOCK(s1d13xxxfb_bitblt_lock); + +/* + * list of card production ids */ static const int s1d13xxxfb_prod_ids[] = { S1D13505_PROD_ID, @@ -69,7 +81,7 @@ static const char *s1d13xxxfb_prod_names[] = { }; /* - * Here we define the default struct fb_fix_screeninfo + * here we define the default struct fb_fix_screeninfo */ static struct fb_fix_screeninfo __devinitdata s1d13xxxfb_fix = { .id = S1D_FBID, @@ -145,8 +157,10 @@ crt_enable(struct s1d13xxxfb_par *par, int enable) s1d13xxxfb_writereg(par, S1DREG_COM_DISP_MODE, mode); } -/* framebuffer control routines */ +/************************************************************* + framebuffer control functions + *************************************************************/ static inline void s1d13xxxfb_setup_pseudocolour(struct fb_info *info) { @@ -242,13 +256,13 @@ s1d13xxxfb_set_par(struct fb_info *info) } /** - * s1d13xxxfb_setcolreg - sets a color register. - * @regno: Which register in the CLUT we are programming - * @red: The red value which can be up to 16 bits wide + * s1d13xxxfb_setcolreg - sets a color register. + * @regno: Which register in the CLUT we are programming + * @red: The red value which can be up to 16 bits wide * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported the alpha value which can be up to 16 bits wide. - * @info: frame buffer info structure + * @info: frame buffer info structure * * Returns negative errno on error, or zero on success. */ @@ -351,15 +365,15 @@ s1d13xxxfb_blank(int blank_mode, struct fb_info *info) } /** - * s1d13xxxfb_pan_display - Pans the display. - * @var: frame buffer variable screen structure - * @info: frame buffer structure that represents a single frame buffer + * s1d13xxxfb_pan_display - Pans the display. + * @var: frame buffer variable screen structure + * @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the - * `yoffset' field of the `var' structure (`xoffset' not yet supported). - * If the values don't fit, return -EINVAL. + * `yoffset' field of the `var' structure (`xoffset' not yet supported). + * If the values don't fit, return -EINVAL. * - * Returns negative errno on error, or zero on success. + * Returns negative errno on error, or zero on success. */ static int s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) @@ -390,8 +404,259 @@ s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } -/* framebuffer information structures */ +/************************************************************ + functions to handle bitblt acceleration + ************************************************************/ + +/** + * bltbit_wait_bitset - waits for change in register value + * @info : framebuffer structure + * @bit : value expected in register + * @timeout : ... + * + * waits until value changes INTO bit + */ +static u8 +bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout) +{ + while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) { + udelay(10); + if (!--timeout) { + dbg_blit("wait_bitset timeout\n"); + break; + } + } + + return timeout; +} + +/** + * bltbit_wait_bitclear - waits for change in register value + * @info : frambuffer structure + * @bit : value currently in register + * @timeout : ... + * + * waits until value changes FROM bit + * + */ +static u8 +bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout) +{ + while (s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit) { + udelay(10); + if (!--timeout) { + dbg_blit("wait_bitclear timeout\n"); + break; + } + } + + return timeout; +} + +/** + * bltbit_fifo_status - checks the current status of the fifo + * @info : framebuffer structure + * + * returns number of free words in buffer + */ +static u8 +bltbit_fifo_status(struct fb_info *info) +{ + u8 status; + status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0); + + /* its empty so room for 16 words */ + if (status & BBLT_FIFO_EMPTY) + return 16; + + /* its full so we dont want to add */ + if (status & BBLT_FIFO_FULL) + return 0; + + /* its atleast half full but we can add one atleast */ + if (status & BBLT_FIFO_NOT_FULL) + return 1; + + return 0; +} + +/* + * s1d13xxxfb_bitblt_copyarea - accelerated copyarea function + * @info : framebuffer structure + * @area : fb_copyarea structure + * + * supports (atleast) S1D13506 + * + */ +static void +s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + u32 dst, src; + u32 stride; + u16 reverse = 0; + u16 sx = area->sx, sy = area->sy; + u16 dx = area->dx, dy = area->dy; + u16 width = area->width, height = area->height; + u16 bpp; + + spin_lock(&s1d13xxxfb_bitblt_lock); + + /* bytes per xres line */ + bpp = (info->var.bits_per_pixel >> 3); + stride = bpp * info->var.xres; + + /* reverse, calculate the last pixel in rectangle */ + if ((dy > sy) || ((dy == sy) && (dx >= sx))) { + dst = (((dy + height - 1) * stride) + (bpp * (dx + width - 1))); + src = (((sy + height - 1) * stride) + (bpp * (sx + width - 1))); + reverse = 1; + /* not reverse, calculate the first pixel in rectangle */ + } else { /* (y * xres) + (bpp * x) */ + dst = (dy * stride) + (bpp * dx); + src = (sy * stride) + (bpp * sx); + } + + /* set source adress */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); + + /* set destination adress */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); + + /* program height and width */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, (width & 0xff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (width >> 8)); + + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, (height & 0xff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (height >> 8)); + + /* negative direction ROP */ + if (reverse == 1) { + dbg_blit("(copyarea) negative rop\n"); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x03); + } else /* positive direction ROP */ { + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, 0x02); + dbg_blit("(copyarea) positive rop\n"); + } + + /* set for rectangel mode and not linear */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); + + /* setup the bpp 1 = 16bpp, 0 = 8bpp*/ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (bpp >> 1)); + + /* set words per xres */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (stride >> 1) & 0xff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (stride >> 9)); + + dbg_blit("(copyarea) dx=%d, dy=%d\n", dx, dy); + dbg_blit("(copyarea) sx=%d, sy=%d\n", sx, sy); + dbg_blit("(copyarea) width=%d, height=%d\n", width - 1, height - 1); + dbg_blit("(copyarea) stride=%d\n", stride); + dbg_blit("(copyarea) bpp=%d=0x0%d, mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1), + (stride >> 1) & 0xff, stride >> 9); + + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CC_EXP, 0x0c); + + /* initialize the engine */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); + + /* wait to complete */ + bltbit_wait_bitclear(info, 0x80, 8000); + + spin_unlock(&s1d13xxxfb_bitblt_lock); +} + +/** + * + * s1d13xxxfb_bitblt_solidfill - accelerated solidfill function + * @info : framebuffer structure + * @rect : fb_fillrect structure + * + * supports (atleast 13506) + * + **/ +static void +s1d13xxxfb_bitblt_solidfill(struct fb_info *info, const struct fb_fillrect *rect) +{ + u32 screen_stride, dest; + u32 fg; + u16 bpp = (info->var.bits_per_pixel >> 3); + + /* grab spinlock */ + spin_lock(&s1d13xxxfb_bitblt_lock); + + /* bytes per x width */ + screen_stride = (bpp * info->var.xres); + + /* bytes to starting point */ + dest = ((rect->dy * screen_stride) + (bpp * rect->dx)); + + dbg_blit("(solidfill) dx=%d, dy=%d, stride=%d, dest=%d\n" + "(solidfill) : rect_width=%d, rect_height=%d\n", + rect->dx, rect->dy, screen_stride, dest, + rect->width - 1, rect->height - 1); + + dbg_blit("(solidfill) : xres=%d, yres=%d, bpp=%d\n", + info->var.xres, info->var.yres, + info->var.bits_per_pixel); + dbg_blit("(solidfill) : rop=%d\n", rect->rop); + + /* We split the destination into the three registers */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dest & 0x00ff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, ((dest >> 8) & 0x00ff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, ((dest >> 16) & 0x00ff)); + + /* give information regarding rectangel width */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH0, ((rect->width) & 0x00ff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_WIDTH1, (rect->width >> 8)); + + /* give information regarding rectangel height */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT0, ((rect->height) & 0x00ff) - 1); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_HEIGHT1, (rect->height >> 8)); + + if (info->fix.visual == FB_VISUAL_TRUECOLOR || + info->fix.visual == FB_VISUAL_DIRECTCOLOR) { + fg = ((u32 *)info->pseudo_palette)[rect->color]; + dbg_blit("(solidfill) truecolor/directcolor\n"); + dbg_blit("(solidfill) pseudo_palette[%d] = %d\n", rect->color, fg); + } else { + fg = rect->color; + dbg_blit("(solidfill) color = %d\n", rect->color); + } + + /* set foreground color */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC0, (fg & 0xff)); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_FGC1, (fg >> 8) & 0xff); + + /* set rectangual region of memory (rectangle and not linear) */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x0); + + /* set operation mode SOLID_FILL */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_OP, BBLT_SOLID_FILL); + + /* set bits per pixel (1 = 16bpp, 0 = 8bpp) */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL1, (info->var.bits_per_pixel >> 4)); + + /* set the memory offset for the bblt in word sizes */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF0, (screen_stride >> 1) & 0x00ff); + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_MEM_OFF1, (screen_stride >> 9)); + + /* and away we go.... */ + s1d13xxxfb_writereg(info->par, S1DREG_BBLT_CTL0, 0x80); + + /* wait until its done */ + bltbit_wait_bitclear(info, 0x80, 8000); + + /* let others play */ + spin_unlock(&s1d13xxxfb_bitblt_lock); +} + +/* framebuffer information structures */ static struct fb_ops s1d13xxxfb_fbops = { .owner = THIS_MODULE, .fb_set_par = s1d13xxxfb_set_par, @@ -400,7 +665,7 @@ static struct fb_ops s1d13xxxfb_fbops = { .fb_pan_display = s1d13xxxfb_pan_display, - /* to be replaced by any acceleration we can */ + /* gets replaced at chip detection time */ .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -412,9 +677,9 @@ static int s1d13xxxfb_width_tab[2][4] __devinitdata = { }; /** - * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to + * s1d13xxxfb_fetch_hw_state - Configure the framebuffer according to * hardware setup. - * @info: frame buffer structure + * @info: frame buffer structure * * We setup the framebuffer structures according to the current * hardware setup. On some machines, the BIOS will have filled @@ -569,7 +834,6 @@ s1d13xxxfb_probe(struct platform_device *pdev) if (pdata && pdata->platform_init_video) pdata->platform_init_video(); - if (pdev->num_resources != 2) { dev_err(&pdev->dev, "invalid num_resources: %i\n", pdev->num_resources); @@ -655,16 +919,27 @@ s1d13xxxfb_probe(struct platform_device *pdev) info->fix = s1d13xxxfb_fix; info->fix.mmio_start = pdev->resource[1].start; - info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start +1; + info->fix.mmio_len = pdev->resource[1].end - pdev->resource[1].start + 1; info->fix.smem_start = pdev->resource[0].start; - info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start +1; + info->fix.smem_len = pdev->resource[0].end - pdev->resource[0].start + 1; printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n", default_par->regs, info->fix.smem_len / 1024, info->screen_base); info->par = default_par; - info->fbops = &s1d13xxxfb_fbops; info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->fbops = &s1d13xxxfb_fbops; + + switch(prod_id) { + case S1D13506_PROD_ID: /* activate acceleration */ + s1d13xxxfb_fbops.fb_fillrect = s1d13xxxfb_bitblt_solidfill; + s1d13xxxfb_fbops.fb_copyarea = s1d13xxxfb_bitblt_copyarea; + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | + FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; + break; + default: + break; + } /* perform "manual" chip initialization, if needed */ if (pdata && pdata->initregs) diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index d3a568e6b16..43680e54542 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -358,9 +358,16 @@ static int s3c_fb_set_par(struct fb_info *info) writel(data, regs + VIDOSD_B(win_no)); data = var->xres * var->yres; + + u32 osdc_data = 0; + + osdc_data = VIDISD14C_ALPHA1_R(0xf) | + VIDISD14C_ALPHA1_G(0xf) | + VIDISD14C_ALPHA1_B(0xf); + if (s3c_fb_has_osd_d(win_no)) { writel(data, regs + VIDOSD_D(win_no)); - writel(0, regs + VIDOSD_C(win_no)); + writel(osdc_data, regs + VIDOSD_C(win_no)); } else writel(data, regs + VIDOSD_C(win_no)); @@ -409,8 +416,12 @@ static int s3c_fb_set_par(struct fb_info *info) data |= WINCON1_BPPMODE_19BPP_A1666; else data |= WINCON1_BPPMODE_18BPP_666; - } else if (var->transp.length != 0) - data |= WINCON1_BPPMODE_25BPP_A1888; + } else if (var->transp.length == 1) + data |= WINCON1_BPPMODE_25BPP_A1888 + | WINCON1_BLD_PIX; + else if (var->transp.length == 4) + data |= WINCON1_BPPMODE_28BPP_A4888 + | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL; else data |= WINCON0_BPPMODE_24BPP_888; @@ -418,6 +429,20 @@ static int s3c_fb_set_par(struct fb_info *info) break; } + /* It has no color key control register for window0 */ + if (win_no > 0) { + u32 keycon0_data = 0, keycon1_data = 0; + + keycon0_data = ~(WxKEYCON0_KEYBL_EN | + WxKEYCON0_KEYEN_F | + WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); + + keycon1_data = WxKEYCON1_COLVAL(0xffffff); + + writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0)); + writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1)); + } + writel(data, regs + WINCON(win_no)); writel(0x0, regs + WINxMAP(win_no)); @@ -700,9 +725,12 @@ static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win) */ static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win) { - fb_dealloc_cmap(&win->fbinfo->cmap); - unregister_framebuffer(win->fbinfo); - s3c_fb_free_memory(sfb, win); + if (win->fbinfo) { + unregister_framebuffer(win->fbinfo); + fb_dealloc_cmap(&win->fbinfo->cmap); + s3c_fb_free_memory(sfb, win); + framebuffer_release(win->fbinfo); + } } /** @@ -753,7 +781,7 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, ret = s3c_fb_alloc_memory(sfb, win); if (ret) { dev_err(sfb->dev, "failed to allocate display memory\n"); - goto err_framebuffer; + return ret; } /* setup the r/b/g positions for the window's palette */ @@ -776,7 +804,7 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, ret = s3c_fb_check_var(&fbinfo->var, fbinfo); if (ret < 0) { dev_err(sfb->dev, "check_var failed on initial video params\n"); - goto err_alloc_mem; + return ret; } /* create initial colour map */ @@ -796,20 +824,13 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, ret = register_framebuffer(fbinfo); if (ret < 0) { dev_err(sfb->dev, "failed to register framebuffer\n"); - goto err_alloc_mem; + return ret; } *res = win; dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id); return 0; - -err_alloc_mem: - s3c_fb_free_memory(sfb, win); - -err_framebuffer: - unregister_framebuffer(fbinfo); - return ret; } /** diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index b0b4513ba53..7da0027e240 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -24,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/cpufreq.h> #include <asm/io.h> #include <asm/div64.h> @@ -89,7 +90,7 @@ static void s3c2410fb_set_lcdaddr(struct fb_info *info) static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi, unsigned long pixclk) { - unsigned long clk = clk_get_rate(fbi->clk); + unsigned long clk = fbi->clk_rate; unsigned long long div; /* pixclk is in picoseconds, our clock is in Hz @@ -758,6 +759,57 @@ static irqreturn_t s3c2410fb_irq(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_CPU_FREQ + +static int s3c2410fb_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freqs = data; + struct s3c2410fb_info *info; + struct fb_info *fbinfo; + long delta_f; + + info = container_of(nb, struct s3c2410fb_info, freq_transition); + fbinfo = platform_get_drvdata(to_platform_device(info->dev)); + + /* work out change, <0 for speed-up */ + delta_f = info->clk_rate - clk_get_rate(info->clk); + + if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) || + (val == CPUFREQ_PRECHANGE && delta_f < 0)) { + info->clk_rate = clk_get_rate(info->clk); + s3c2410fb_activate_var(fbinfo); + } + + return 0; +} + +static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info) +{ + info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition; + + return cpufreq_register_notifier(&info->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info) +{ + cpufreq_unregister_notifier(&info->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info) +{ + return 0; +} + +static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info) +{ +} +#endif + + static char driver_name[] = "s3c2410fb"; static int __init s3c24xxfb_probe(struct platform_device *pdev, @@ -875,6 +927,8 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, msleep(1); + info->clk_rate = clk_get_rate(info->clk); + /* find maximum required memory size for display */ for (i = 0; i < mach_info->num_displays; i++) { unsigned long smem_len = mach_info->displays[i].xres; @@ -904,11 +958,17 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, s3c2410fb_check_var(&fbinfo->var, fbinfo); + ret = s3c2410fb_cpufreq_register(info); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register cpufreq\n"); + goto free_video_memory; + } + ret = register_framebuffer(fbinfo); if (ret < 0) { printk(KERN_ERR "Failed to register framebuffer device: %d\n", ret); - goto free_video_memory; + goto free_cpufreq; } /* create device files */ @@ -922,6 +982,8 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, return 0; + free_cpufreq: + s3c2410fb_cpufreq_deregister(info); free_video_memory: s3c2410fb_unmap_video_memory(fbinfo); release_clock: @@ -961,6 +1023,7 @@ static int s3c2410fb_remove(struct platform_device *pdev) int irq; unregister_framebuffer(fbinfo); + s3c2410fb_cpufreq_deregister(info); s3c2410fb_lcd_enable(info, 0); msleep(1); diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h index 9a6ba3e9d1b..47a17bd2301 100644 --- a/drivers/video/s3c2410fb.h +++ b/drivers/video/s3c2410fb.h @@ -29,8 +29,13 @@ struct s3c2410fb_info { enum s3c_drv_type drv_type; struct s3c2410fb_hw regs; + unsigned long clk_rate; unsigned int palette_ready; +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif + /* keep these registers in case we need to re-write palette */ u32 palette_buffer[256]; u32 pseudo_pal[16]; diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 7e17ee95a97..7072d19080d 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -5928,7 +5928,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if(pci_enable_device(pdev)) { if(ivideo->nbridge) pci_dev_put(ivideo->nbridge); pci_set_drvdata(pdev, NULL); - kfree(sis_fb_info); + framebuffer_release(sis_fb_info); return -EIO; } } @@ -6134,7 +6134,7 @@ error_3: vfree(ivideo->bios_abase); pci_set_drvdata(pdev, NULL); if(!ivideo->sisvga_enabled) pci_disable_device(pdev); - kfree(sis_fb_info); + framebuffer_release(sis_fb_info); return ret; } diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index eabaad765ae..eec9dcb7f59 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -1380,7 +1380,7 @@ stifb_cleanup(void) if (info->screen_base) iounmap(info->screen_base); fb_dealloc_cmap(&info->cmap); - kfree(info); + framebuffer_release(info); } sti->info = NULL; } diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c index 643afbfe827..45b883598bf 100644 --- a/drivers/video/tcx.c +++ b/drivers/video/tcx.c @@ -116,17 +116,16 @@ struct tcx_par { u32 flags; #define TCX_FLAG_BLANKED 0x00000001 - unsigned long physbase; unsigned long which_io; - unsigned long fbsize; struct sbus_mmap_map mmap_map[TCX_MMAP_ENTRIES]; int lowdepth; }; /* Reset control plane so that WID is 8-bit plane. */ -static void __tcx_set_control_plane(struct tcx_par *par) +static void __tcx_set_control_plane(struct fb_info *info) { + struct tcx_par *par = info->par; u32 __iomem *p, *pend; if (par->lowdepth) @@ -135,7 +134,7 @@ static void __tcx_set_control_plane(struct tcx_par *par) p = par->cplane; if (p == NULL) return; - for (pend = p + par->fbsize; p < pend; p++) { + for (pend = p + info->fix.smem_len; p < pend; p++) { u32 tmp = sbus_readl(p); tmp &= 0xffffff; @@ -149,7 +148,7 @@ static void tcx_reset(struct fb_info *info) unsigned long flags; spin_lock_irqsave(&par->lock, flags); - __tcx_set_control_plane(par); + __tcx_set_control_plane(info); spin_unlock_irqrestore(&par->lock, flags); } @@ -304,7 +303,7 @@ static int tcx_mmap(struct fb_info *info, struct vm_area_struct *vma) struct tcx_par *par = (struct tcx_par *)info->par; return sbusfb_mmap_helper(par->mmap_map, - par->physbase, par->fbsize, + info->fix.smem_start, info->fix.smem_len, par->which_io, vma); } @@ -316,7 +315,7 @@ static int tcx_ioctl(struct fb_info *info, unsigned int cmd, return sbusfb_ioctl_helper(cmd, arg, info, FBTYPE_TCXCOLOR, (par->lowdepth ? 8 : 24), - par->fbsize); + info->fix.smem_len); } /* @@ -358,10 +357,10 @@ static void tcx_unmap_regs(struct of_device *op, struct fb_info *info, par->bt, sizeof(struct bt_regs)); if (par->cplane) of_iounmap(&op->resource[4], - par->cplane, par->fbsize * sizeof(u32)); + par->cplane, info->fix.smem_len * sizeof(u32)); if (info->screen_base) of_iounmap(&op->resource[0], - info->screen_base, par->fbsize); + info->screen_base, info->fix.smem_len); } static int __devinit tcx_probe(struct of_device *op, @@ -391,7 +390,7 @@ static int __devinit tcx_probe(struct of_device *op, linebytes = of_getintprop_default(dp, "linebytes", info->var.xres); - par->fbsize = PAGE_ALIGN(linebytes * info->var.yres); + info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres); par->tec = of_ioremap(&op->resource[7], 0, sizeof(struct tcx_tec), "tcx tec"); @@ -400,7 +399,7 @@ static int __devinit tcx_probe(struct of_device *op, par->bt = of_ioremap(&op->resource[8], 0, sizeof(struct bt_regs), "tcx dac"); info->screen_base = of_ioremap(&op->resource[0], 0, - par->fbsize, "tcx ram"); + info->fix.smem_len, "tcx ram"); if (!par->tec || !par->thc || !par->bt || !info->screen_base) goto out_unmap_regs; @@ -408,7 +407,7 @@ static int __devinit tcx_probe(struct of_device *op, memcpy(&par->mmap_map, &__tcx_mmap_map, sizeof(par->mmap_map)); if (!par->lowdepth) { par->cplane = of_ioremap(&op->resource[4], 0, - par->fbsize * sizeof(u32), + info->fix.smem_len * sizeof(u32), "tcx cplane"); if (!par->cplane) goto out_unmap_regs; @@ -419,7 +418,7 @@ static int __devinit tcx_probe(struct of_device *op, par->mmap_map[6].size = SBUS_MMAP_EMPTY; } - par->physbase = op->resource[0].start; + info->fix.smem_start = op->resource[0].start; par->which_io = op->resource[0].flags & IORESOURCE_BITS; for (i = 0; i < TCX_MMAP_ENTRIES; i++) { @@ -473,7 +472,7 @@ static int __devinit tcx_probe(struct of_device *op, printk(KERN_INFO "%s: TCX at %lx:%lx, %s\n", dp->full_name, par->which_io, - par->physbase, + info->fix.smem_start, par->lowdepth ? "8-bit only" : "24-bit depth"); return 0; diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index d6856f43d24..bd37ee1f6a2 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -174,8 +174,17 @@ static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green, return err; } +static void vesafb_destroy(struct fb_info *info) +{ + if (info->screen_base) + iounmap(info->screen_base); + release_mem_region(info->aperture_base, info->aperture_size); + framebuffer_release(info); +} + static struct fb_ops vesafb_ops = { .owner = THIS_MODULE, + .fb_destroy = vesafb_destroy, .fb_setcolreg = vesafb_setcolreg, .fb_pan_display = vesafb_pan_display, .fb_fillrect = cfb_fillrect, @@ -286,6 +295,10 @@ static int __init vesafb_probe(struct platform_device *dev) info->pseudo_palette = info->par; info->par = NULL; + /* set vesafb aperture size for generic probing */ + info->aperture_base = screen_info.lfb_base; + info->aperture_size = size_total; + info->screen_base = ioremap(vesafb_fix.smem_start, vesafb_fix.smem_len); if (!info->screen_base) { printk(KERN_ERR @@ -437,7 +450,7 @@ static int __init vesafb_probe(struct platform_device *dev) info->fbops = &vesafb_ops; info->var = vesafb_defined; info->fix = vesafb_fix; - info->flags = FBINFO_FLAG_DEFAULT | + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE | (ypan ? FBINFO_HWACCEL_YPAN : 0); if (!ypan) diff --git a/drivers/vlynq/Kconfig b/drivers/vlynq/Kconfig new file mode 100644 index 00000000000..f6542211db4 --- /dev/null +++ b/drivers/vlynq/Kconfig @@ -0,0 +1,20 @@ +menu "TI VLYNQ" + +config VLYNQ + bool "TI VLYNQ bus support" + depends on AR7 && EXPERIMENTAL + help + Support for Texas Instruments(R) VLYNQ bus. + The VLYNQ bus is a high-speed, serial and packetized + data bus which allows external peripherals of a SoC + to appear into the system's main memory. + + If unsure, say N + +config VLYNQ_DEBUG + bool "VLYNQ bus debug" + depends on VLYNQ && KERNEL_DEBUG + help + Turn on VLYNQ bus debugging. + +endmenu diff --git a/drivers/vlynq/Makefile b/drivers/vlynq/Makefile new file mode 100644 index 00000000000..b3f61149b59 --- /dev/null +++ b/drivers/vlynq/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for kernel vlynq drivers +# + +obj-$(CONFIG_VLYNQ) += vlynq.o diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c new file mode 100644 index 00000000000..7335433b067 --- /dev/null +++ b/drivers/vlynq/vlynq.c @@ -0,0 +1,814 @@ +/* + * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Parts of the VLYNQ specification can be found here: + * http://www.ti.com/litv/pdf/sprue36a + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/vlynq.h> + +#define VLYNQ_CTRL_PM_ENABLE 0x80000000 +#define VLYNQ_CTRL_CLOCK_INT 0x00008000 +#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16) +#define VLYNQ_CTRL_INT_LOCAL 0x00004000 +#define VLYNQ_CTRL_INT_ENABLE 0x00002000 +#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8) +#define VLYNQ_CTRL_INT2CFG 0x00000080 +#define VLYNQ_CTRL_RESET 0x00000001 + +#define VLYNQ_CTRL_CLOCK_MASK (0x7 << 16) + +#define VLYNQ_INT_OFFSET 0x00000014 +#define VLYNQ_REMOTE_OFFSET 0x00000080 + +#define VLYNQ_STATUS_LINK 0x00000001 +#define VLYNQ_STATUS_LERROR 0x00000080 +#define VLYNQ_STATUS_RERROR 0x00000100 + +#define VINT_ENABLE 0x00000100 +#define VINT_TYPE_EDGE 0x00000080 +#define VINT_LEVEL_LOW 0x00000040 +#define VINT_VECTOR(x) ((x) & 0x1f) +#define VINT_OFFSET(irq) (8 * ((irq) % 4)) + +#define VLYNQ_AUTONEGO_V2 0x00010000 + +struct vlynq_regs { + u32 revision; + u32 control; + u32 status; + u32 int_prio; + u32 int_status; + u32 int_pending; + u32 int_ptr; + u32 tx_offset; + struct vlynq_mapping rx_mapping[4]; + u32 chip; + u32 autonego; + u32 unused[6]; + u32 int_device[8]; +}; + +#ifdef VLYNQ_DEBUG +static void vlynq_dump_regs(struct vlynq_device *dev) +{ + int i; + + printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n", + dev->local, dev->remote); + for (i = 0; i < 32; i++) { + printk(KERN_DEBUG "VLYNQ: local %d: %08x\n", + i + 1, ((u32 *)dev->local)[i]); + printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n", + i + 1, ((u32 *)dev->remote)[i]); + } +} + +static void vlynq_dump_mem(u32 *base, int count) +{ + int i; + + for (i = 0; i < (count + 3) / 4; i++) { + if (i % 4 == 0) + printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4); + printk(KERN_DEBUG " 0x%08x", *(base + i)); + } + printk(KERN_DEBUG "\n"); +} +#endif + +/* Check the VLYNQ link status with a given device */ +static int vlynq_linked(struct vlynq_device *dev) +{ + int i; + + for (i = 0; i < 100; i++) + if (readl(&dev->local->status) & VLYNQ_STATUS_LINK) + return 1; + else + cpu_relax(); + + return 0; +} + +static void vlynq_reset(struct vlynq_device *dev) +{ + writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET, + &dev->local->control); + + /* Wait for the devices to finish resetting */ + msleep(5); + + /* Remove reset bit */ + writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET, + &dev->local->control); + + /* Give some time for the devices to settle */ + msleep(5); +} + +static void vlynq_irq_unmask(unsigned int irq) +{ + u32 val; + struct vlynq_device *dev = get_irq_chip_data(irq); + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = readl(&dev->remote->int_device[virq >> 2]); + val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq); + writel(val, &dev->remote->int_device[virq >> 2]); +} + +static void vlynq_irq_mask(unsigned int irq) +{ + u32 val; + struct vlynq_device *dev = get_irq_chip_data(irq); + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = readl(&dev->remote->int_device[virq >> 2]); + val &= ~(VINT_ENABLE << VINT_OFFSET(virq)); + writel(val, &dev->remote->int_device[virq >> 2]); +} + +static int vlynq_irq_type(unsigned int irq, unsigned int flow_type) +{ + u32 val; + struct vlynq_device *dev = get_irq_chip_data(irq); + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = readl(&dev->remote->int_device[virq >> 2]); + switch (flow_type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + val |= VINT_TYPE_EDGE << VINT_OFFSET(virq); + val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); + break; + case IRQ_TYPE_LEVEL_HIGH: + val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); + val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); + break; + case IRQ_TYPE_LEVEL_LOW: + val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); + val |= VINT_LEVEL_LOW << VINT_OFFSET(virq); + break; + default: + return -EINVAL; + } + writel(val, &dev->remote->int_device[virq >> 2]); + return 0; +} + +static void vlynq_local_ack(unsigned int irq) +{ + struct vlynq_device *dev = get_irq_chip_data(irq); + + u32 status = readl(&dev->local->status); + + pr_debug("%s: local status: 0x%08x\n", + dev_name(&dev->dev), status); + writel(status, &dev->local->status); +} + +static void vlynq_remote_ack(unsigned int irq) +{ + struct vlynq_device *dev = get_irq_chip_data(irq); + + u32 status = readl(&dev->remote->status); + + pr_debug("%s: remote status: 0x%08x\n", + dev_name(&dev->dev), status); + writel(status, &dev->remote->status); +} + +static irqreturn_t vlynq_irq(int irq, void *dev_id) +{ + struct vlynq_device *dev = dev_id; + u32 status; + int virq = 0; + + status = readl(&dev->local->int_status); + writel(status, &dev->local->int_status); + + if (unlikely(!status)) + spurious_interrupt(); + + while (status) { + if (status & 1) + do_IRQ(dev->irq_start + virq); + status >>= 1; + virq++; + } + + return IRQ_HANDLED; +} + +static struct irq_chip vlynq_irq_chip = { + .name = "vlynq", + .unmask = vlynq_irq_unmask, + .mask = vlynq_irq_mask, + .set_type = vlynq_irq_type, +}; + +static struct irq_chip vlynq_local_chip = { + .name = "vlynq local error", + .unmask = vlynq_irq_unmask, + .mask = vlynq_irq_mask, + .ack = vlynq_local_ack, +}; + +static struct irq_chip vlynq_remote_chip = { + .name = "vlynq local error", + .unmask = vlynq_irq_unmask, + .mask = vlynq_irq_mask, + .ack = vlynq_remote_ack, +}; + +static int vlynq_setup_irq(struct vlynq_device *dev) +{ + u32 val; + int i, virq; + + if (dev->local_irq == dev->remote_irq) { + printk(KERN_ERR + "%s: local vlynq irq should be different from remote\n", + dev_name(&dev->dev)); + return -EINVAL; + } + + /* Clear local and remote error bits */ + writel(readl(&dev->local->status), &dev->local->status); + writel(readl(&dev->remote->status), &dev->remote->status); + + /* Now setup interrupts */ + val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq); + val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL | + VLYNQ_CTRL_INT2CFG; + val |= readl(&dev->local->control); + writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr); + writel(val, &dev->local->control); + + val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq); + val |= VLYNQ_CTRL_INT_ENABLE; + val |= readl(&dev->remote->control); + writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr); + writel(val, &dev->remote->int_ptr); + writel(val, &dev->remote->control); + + for (i = dev->irq_start; i <= dev->irq_end; i++) { + virq = i - dev->irq_start; + if (virq == dev->local_irq) { + set_irq_chip_and_handler(i, &vlynq_local_chip, + handle_level_irq); + set_irq_chip_data(i, dev); + } else if (virq == dev->remote_irq) { + set_irq_chip_and_handler(i, &vlynq_remote_chip, + handle_level_irq); + set_irq_chip_data(i, dev); + } else { + set_irq_chip_and_handler(i, &vlynq_irq_chip, + handle_simple_irq); + set_irq_chip_data(i, dev); + writel(0, &dev->remote->int_device[virq >> 2]); + } + } + + if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) { + printk(KERN_ERR "%s: request_irq failed\n", + dev_name(&dev->dev)); + return -EAGAIN; + } + + return 0; +} + +static void vlynq_device_release(struct device *dev) +{ + struct vlynq_device *vdev = to_vlynq_device(dev); + kfree(vdev); +} + +static int vlynq_device_match(struct device *dev, + struct device_driver *drv) +{ + struct vlynq_device *vdev = to_vlynq_device(dev); + struct vlynq_driver *vdrv = to_vlynq_driver(drv); + struct vlynq_device_id *ids = vdrv->id_table; + + while (ids->id) { + if (ids->id == vdev->dev_id) { + vdev->divisor = ids->divisor; + vlynq_set_drvdata(vdev, ids); + printk(KERN_INFO "Driver found for VLYNQ " + "device: %08x\n", vdev->dev_id); + return 1; + } + printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" + " for VLYNQ device: %08x\n", ids->id, vdev->dev_id); + ids++; + } + return 0; +} + +static int vlynq_device_probe(struct device *dev) +{ + struct vlynq_device *vdev = to_vlynq_device(dev); + struct vlynq_driver *drv = to_vlynq_driver(dev->driver); + struct vlynq_device_id *id = vlynq_get_drvdata(vdev); + int result = -ENODEV; + + if (drv->probe) + result = drv->probe(vdev, id); + if (result) + put_device(dev); + return result; +} + +static int vlynq_device_remove(struct device *dev) +{ + struct vlynq_driver *drv = to_vlynq_driver(dev->driver); + + if (drv->remove) + drv->remove(to_vlynq_device(dev)); + + return 0; +} + +int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner) +{ + driver->driver.name = driver->name; + driver->driver.bus = &vlynq_bus_type; + return driver_register(&driver->driver); +} +EXPORT_SYMBOL(__vlynq_register_driver); + +void vlynq_unregister_driver(struct vlynq_driver *driver) +{ + driver_unregister(&driver->driver); +} +EXPORT_SYMBOL(vlynq_unregister_driver); + +/* + * A VLYNQ remote device can clock the VLYNQ bus master + * using a dedicated clock line. In that case, both the + * remove device and the bus master should have the same + * serial clock dividers configured. Iterate through the + * 8 possible dividers until we actually link with the + * device. + */ +static int __vlynq_try_remote(struct vlynq_device *dev) +{ + int i; + + vlynq_reset(dev); + for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ? + i <= vlynq_rdiv8 : i >= vlynq_rdiv2; + dev->dev_id ? i++ : i--) { + + if (!vlynq_linked(dev)) + break; + + writel((readl(&dev->remote->control) & + ~VLYNQ_CTRL_CLOCK_MASK) | + VLYNQ_CTRL_CLOCK_INT | + VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), + &dev->remote->control); + writel((readl(&dev->local->control) + & ~(VLYNQ_CTRL_CLOCK_INT | + VLYNQ_CTRL_CLOCK_MASK)) | + VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), + &dev->local->control); + + if (vlynq_linked(dev)) { + printk(KERN_DEBUG + "%s: using remote clock divisor %d\n", + dev_name(&dev->dev), i - vlynq_rdiv1 + 1); + dev->divisor = i; + return 0; + } else { + vlynq_reset(dev); + } + } + + return -ENODEV; +} + +/* + * A VLYNQ remote device can be clocked by the VLYNQ bus + * master using a dedicated clock line. In that case, only + * the bus master configures the serial clock divider. + * Iterate through the 8 possible dividers until we + * actually get a link with the device. + */ +static int __vlynq_try_local(struct vlynq_device *dev) +{ + int i; + + vlynq_reset(dev); + + for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ? + i <= vlynq_ldiv8 : i >= vlynq_ldiv2; + dev->dev_id ? i++ : i--) { + + writel((readl(&dev->local->control) & + ~VLYNQ_CTRL_CLOCK_MASK) | + VLYNQ_CTRL_CLOCK_INT | + VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1), + &dev->local->control); + + if (vlynq_linked(dev)) { + printk(KERN_DEBUG + "%s: using local clock divisor %d\n", + dev_name(&dev->dev), i - vlynq_ldiv1 + 1); + dev->divisor = i; + return 0; + } else { + vlynq_reset(dev); + } + } + + return -ENODEV; +} + +/* + * When using external clocking method, serial clock + * is supplied by an external oscillator, therefore we + * should mask the local clock bit in the clock control + * register for both the bus master and the remote device. + */ +static int __vlynq_try_external(struct vlynq_device *dev) +{ + vlynq_reset(dev); + if (!vlynq_linked(dev)) + return -ENODEV; + + writel((readl(&dev->remote->control) & + ~VLYNQ_CTRL_CLOCK_INT), + &dev->remote->control); + + writel((readl(&dev->local->control) & + ~VLYNQ_CTRL_CLOCK_INT), + &dev->local->control); + + if (vlynq_linked(dev)) { + printk(KERN_DEBUG "%s: using external clock\n", + dev_name(&dev->dev)); + dev->divisor = vlynq_div_external; + return 0; + } + + return -ENODEV; +} + +static int __vlynq_enable_device(struct vlynq_device *dev) +{ + int result; + struct plat_vlynq_ops *ops = dev->dev.platform_data; + + result = ops->on(dev); + if (result) + return result; + + switch (dev->divisor) { + case vlynq_div_external: + case vlynq_div_auto: + /* When the device is brought from reset it should have clock + * generation negotiated by hardware. + * Check which device is generating clocks and perform setup + * accordingly */ + if (vlynq_linked(dev) && readl(&dev->remote->control) & + VLYNQ_CTRL_CLOCK_INT) { + if (!__vlynq_try_remote(dev) || + !__vlynq_try_local(dev) || + !__vlynq_try_external(dev)) + return 0; + } else { + if (!__vlynq_try_external(dev) || + !__vlynq_try_local(dev) || + !__vlynq_try_remote(dev)) + return 0; + } + break; + case vlynq_ldiv1: + case vlynq_ldiv2: + case vlynq_ldiv3: + case vlynq_ldiv4: + case vlynq_ldiv5: + case vlynq_ldiv6: + case vlynq_ldiv7: + case vlynq_ldiv8: + writel(VLYNQ_CTRL_CLOCK_INT | + VLYNQ_CTRL_CLOCK_DIV(dev->divisor - + vlynq_ldiv1), &dev->local->control); + writel(0, &dev->remote->control); + if (vlynq_linked(dev)) { + printk(KERN_DEBUG + "%s: using local clock divisor %d\n", + dev_name(&dev->dev), + dev->divisor - vlynq_ldiv1 + 1); + return 0; + } + break; + case vlynq_rdiv1: + case vlynq_rdiv2: + case vlynq_rdiv3: + case vlynq_rdiv4: + case vlynq_rdiv5: + case vlynq_rdiv6: + case vlynq_rdiv7: + case vlynq_rdiv8: + writel(0, &dev->local->control); + writel(VLYNQ_CTRL_CLOCK_INT | + VLYNQ_CTRL_CLOCK_DIV(dev->divisor - + vlynq_rdiv1), &dev->remote->control); + if (vlynq_linked(dev)) { + printk(KERN_DEBUG + "%s: using remote clock divisor %d\n", + dev_name(&dev->dev), + dev->divisor - vlynq_rdiv1 + 1); + return 0; + } + break; + } + + ops->off(dev); + return -ENODEV; +} + +int vlynq_enable_device(struct vlynq_device *dev) +{ + struct plat_vlynq_ops *ops = dev->dev.platform_data; + int result = -ENODEV; + + result = __vlynq_enable_device(dev); + if (result) + return result; + + result = vlynq_setup_irq(dev); + if (result) + ops->off(dev); + + dev->enabled = !result; + return result; +} +EXPORT_SYMBOL(vlynq_enable_device); + + +void vlynq_disable_device(struct vlynq_device *dev) +{ + struct plat_vlynq_ops *ops = dev->dev.platform_data; + + dev->enabled = 0; + free_irq(dev->irq, dev); + ops->off(dev); +} +EXPORT_SYMBOL(vlynq_disable_device); + +int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset, + struct vlynq_mapping *mapping) +{ + int i; + + if (!dev->enabled) + return -ENXIO; + + writel(tx_offset, &dev->local->tx_offset); + for (i = 0; i < 4; i++) { + writel(mapping[i].offset, &dev->local->rx_mapping[i].offset); + writel(mapping[i].size, &dev->local->rx_mapping[i].size); + } + return 0; +} +EXPORT_SYMBOL(vlynq_set_local_mapping); + +int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset, + struct vlynq_mapping *mapping) +{ + int i; + + if (!dev->enabled) + return -ENXIO; + + writel(tx_offset, &dev->remote->tx_offset); + for (i = 0; i < 4; i++) { + writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset); + writel(mapping[i].size, &dev->remote->rx_mapping[i].size); + } + return 0; +} +EXPORT_SYMBOL(vlynq_set_remote_mapping); + +int vlynq_set_local_irq(struct vlynq_device *dev, int virq) +{ + int irq = dev->irq_start + virq; + if (dev->enabled) + return -EBUSY; + + if ((irq < dev->irq_start) || (irq > dev->irq_end)) + return -EINVAL; + + if (virq == dev->remote_irq) + return -EINVAL; + + dev->local_irq = virq; + + return 0; +} +EXPORT_SYMBOL(vlynq_set_local_irq); + +int vlynq_set_remote_irq(struct vlynq_device *dev, int virq) +{ + int irq = dev->irq_start + virq; + if (dev->enabled) + return -EBUSY; + + if ((irq < dev->irq_start) || (irq > dev->irq_end)) + return -EINVAL; + + if (virq == dev->local_irq) + return -EINVAL; + + dev->remote_irq = virq; + + return 0; +} +EXPORT_SYMBOL(vlynq_set_remote_irq); + +static int vlynq_probe(struct platform_device *pdev) +{ + struct vlynq_device *dev; + struct resource *regs_res, *mem_res, *irq_res; + int len, result; + + regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + if (!regs_res) + return -ENODEV; + + mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem"); + if (!mem_res) + return -ENODEV; + + irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq"); + if (!irq_res) + return -ENODEV; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR + "vlynq: failed to allocate device structure\n"); + return -ENOMEM; + } + + dev->id = pdev->id; + dev->dev.bus = &vlynq_bus_type; + dev->dev.parent = &pdev->dev; + dev_set_name(&dev->dev, "vlynq%d", dev->id); + dev->dev.platform_data = pdev->dev.platform_data; + dev->dev.release = vlynq_device_release; + + dev->regs_start = regs_res->start; + dev->regs_end = regs_res->end; + dev->mem_start = mem_res->start; + dev->mem_end = mem_res->end; + + len = regs_res->end - regs_res->start; + if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) { + printk(KERN_ERR "%s: Can't request vlynq registers\n", + dev_name(&dev->dev)); + result = -ENXIO; + goto fail_request; + } + + dev->local = ioremap(regs_res->start, len); + if (!dev->local) { + printk(KERN_ERR "%s: Can't remap vlynq registers\n", + dev_name(&dev->dev)); + result = -ENXIO; + goto fail_remap; + } + + dev->remote = (struct vlynq_regs *)((void *)dev->local + + VLYNQ_REMOTE_OFFSET); + + dev->irq = platform_get_irq_byname(pdev, "irq"); + dev->irq_start = irq_res->start; + dev->irq_end = irq_res->end; + dev->local_irq = dev->irq_end - dev->irq_start; + dev->remote_irq = dev->local_irq - 1; + + if (device_register(&dev->dev)) + goto fail_register; + platform_set_drvdata(pdev, dev); + + printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", + dev_name(&dev->dev), (void *)dev->regs_start, dev->irq, + (void *)dev->mem_start); + + dev->dev_id = 0; + dev->divisor = vlynq_div_auto; + result = __vlynq_enable_device(dev); + if (result == 0) { + dev->dev_id = readl(&dev->remote->chip); + ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev); + } + if (dev->dev_id) + printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id); + + return 0; + +fail_register: + iounmap(dev->local); +fail_remap: +fail_request: + release_mem_region(regs_res->start, len); + kfree(dev); + return result; +} + +static int vlynq_remove(struct platform_device *pdev) +{ + struct vlynq_device *dev = platform_get_drvdata(pdev); + + device_unregister(&dev->dev); + iounmap(dev->local); + release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start); + + kfree(dev); + + return 0; +} + +static struct platform_driver vlynq_platform_driver = { + .driver.name = "vlynq", + .probe = vlynq_probe, + .remove = __devexit_p(vlynq_remove), +}; + +struct bus_type vlynq_bus_type = { + .name = "vlynq", + .match = vlynq_device_match, + .probe = vlynq_device_probe, + .remove = vlynq_device_remove, +}; +EXPORT_SYMBOL(vlynq_bus_type); + +static int __devinit vlynq_init(void) +{ + int res = 0; + + res = bus_register(&vlynq_bus_type); + if (res) + goto fail_bus; + + res = platform_driver_register(&vlynq_platform_driver); + if (res) + goto fail_platform; + + return 0; + +fail_platform: + bus_unregister(&vlynq_bus_type); +fail_bus: + return res; +} + +static void __devexit vlynq_exit(void) +{ + platform_driver_unregister(&vlynq_platform_driver); + bus_unregister(&vlynq_bus_type); +} + +module_init(vlynq_init); +module_exit(vlynq_exit); |