diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mfd/ucb1x00-core.c | 2 | ||||
-rw-r--r-- | drivers/mfd/ucb1x00.h | 1 | ||||
-rw-r--r-- | drivers/serial/8250.c | 25 | ||||
-rw-r--r-- | drivers/serial/dz.c | 2 | ||||
-rw-r--r-- | drivers/serial/ip22zilog.c | 3 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 1 | ||||
-rw-r--r-- | drivers/serial/sunsu.c | 35 |
7 files changed, 52 insertions, 17 deletions
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 632bc218c86..2bf32721eb5 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -479,7 +479,7 @@ static int ucb1x00_probe(struct mcp *mcp) mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); - if (id != UCB_ID_1200 && id != UCB_ID_1300) { + if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); goto err_disable; } diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h index 9c9a647d8b7..ca8df8072d4 100644 --- a/drivers/mfd/ucb1x00.h +++ b/drivers/mfd/ucb1x00.h @@ -94,6 +94,7 @@ #define UCB_ID 0x0c #define UCB_ID_1200 0x1004 #define UCB_ID_1300 0x1005 +#define UCB_ID_TC35143 0x9712 #define UCB_MODE 0x0d #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0995430e4cf..0ae9ced00ed 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) static unsigned int serial_in(struct uart_8250_port *up, int offset) { + unsigned int tmp; offset = map_8250_in_reg(up, offset) << up->port.regshift; switch (up->port.iotype) { @@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) return __raw_readl(up->port.membase + offset); #endif + case UPIO_TSI: + if (offset == UART_IIR) { + tmp = readl((u32 *)(up->port.membase + UART_RX)); + return (cpu_to_le32(tmp) >> 8) & 0xff; + } else + return readb(up->port.membase + offset); + default: return inb(up->port.iobase + offset); } @@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value) __raw_writel(value, up->port.membase + offset); break; #endif + case UPIO_TSI: + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, up->port.membase + offset); + break; default: outb(value, up->port.iobase + offset); @@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); - if (oops_in_progress) { - locked = spin_trylock_irqsave(&up->port.lock, flags); + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); } else - spin_lock_irqsave(&up->port.lock, flags); + spin_lock(&up->port.lock); /* * First save the IER then disable the interrupts @@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial_out(up, UART_IER, ier); if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock(&up->port.lock); + local_irq_restore(flags); } static int serial8250_console_setup(struct console *co, char *options) diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index d119c8296a7..8a98aae80e2 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport) } #ifdef CONFIG_SERIAL_DZ_CONSOLE -static void dz_console_putchar(struct uart_port *port, int ch) +static void dz_console_putchar(struct uart_port *uport, int ch) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 342042889f6..5ff269fb604 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void) up[(chip * 2) + 1].port.fifosize = 1; up[(chip * 2) + 1].port.ops = &ip22zilog_pops; up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; up[(chip * 2) + 1].port.line = (chip * 2) + 1; - up[(chip * 2) + 1].flags = 0; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; } } diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index d5f636fbf29..80ef7d48275 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: + case UPIO_TSI: snprintf(address, sizeof(address), "MMIO 0x%lx", port->mapbase); break; diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index f9013baba05..93bdaa3169f 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1406,25 +1406,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct device_node *dp = op->node; struct uart_sunsu_port *up; struct resource *rp; + enum su_type type; int err; - if (inst >= UART_NR) - return -EINVAL; + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } - up = &sunsu_ports[inst]; up->port.line = inst; spin_lock_init(&up->port.lock); - up->su_type = su_get_type(dp); + up->su_type = type; rp = &op->resource[0]; - up->port.mapbase = op->resource[0].start; - + up->port.mapbase = rp->start; up->reg_size = (rp->end - rp->start) + 1; up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); - if (!up->port.membase) + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); return -ENOMEM; + } up->port.irq = op->irqs[0]; @@ -1436,8 +1446,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m err = 0; if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); - if (err) + if (err) { + kfree(up); goto out_unmap; + } + dev_set_drvdata(&op->dev, up); return 0; } @@ -1476,8 +1489,12 @@ static int __devexit su_remove(struct of_device *dev) #ifdef CONFIG_SERIO serio_unregister_port(&up->serio); #endif - } else if (up->port.type != PORT_UNKNOWN) + kfree(up); + } else if (up->port.type != PORT_UNKNOWN) { uart_remove_one_port(&sunsu_reg, &up->port); + } + + dev_set_drvdata(&dev->dev, NULL); return 0; } |