aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/Kconfig13
-rw-r--r--drivers/scsi/arm/Kconfig1
-rw-r--r--drivers/scsi/constants.c108
-rw-r--r--drivers/scsi/scsi_transport_spi.c109
4 files changed, 123 insertions, 108 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 20dd85a7781..4c42065dea8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -336,6 +336,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -632,6 +634,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
@@ -752,6 +755,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
@@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
@@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
@@ -1423,6 +1429,7 @@ config SCSI_DC390T
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
+ select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
@@ -1681,6 +1688,7 @@ config OKTAGON_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
@@ -1722,6 +1730,7 @@ config TT_DMA_EMUL
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
+ select SCSI_SPI_ATTRS
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
@@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147 && SCSI=y
+ select SCSI_SPI_ATTRS
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
@@ -1750,6 +1760,7 @@ config MVME147_SCSI
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
@@ -1758,6 +1769,7 @@ config MVME16x_SCSI
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
depends on BVME6000 && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
@@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 13f23043c8a..06d7601cdf5 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -4,6 +4,7 @@
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
depends on ARCH_ACORN && SCSI && BROKEN
+ select SCSI_SPI_ATTRS
help
This enables support for the Acorn SCSI card (aka30). If you have an
Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index a972c1e89e3..30a335349ce 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -1278,114 +1278,6 @@ void scsi_print_req_sense(const char *devclass, struct scsi_request *sreq)
}
EXPORT_SYMBOL(scsi_print_req_sense);
-#ifdef CONFIG_SCSI_CONSTANTS
-static const char * const one_byte_msgs[] = {
-/* 0x00 */ "Command Complete", NULL, "Save Pointers",
-/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
-/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
-/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
-/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
-/* 0x0f */ "Initiate Recovery", "Release Recovery"
-};
-#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *))
-
-static const char * const two_byte_msgs[] = {
-/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag"
-/* 0x23 */ "Ignore Wide Residue"
-};
-#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
-
-static const char * const extended_msgs[] = {
-/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
-/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request"
-};
-#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
-
-
-int scsi_print_msg (const unsigned char *msg)
-{
- int len = 0, i;
- if (msg[0] == EXTENDED_MESSAGE) {
- len = 3 + msg[1];
- if (msg[2] < NO_EXTENDED_MSGS)
- printk ("%s ", extended_msgs[msg[2]]);
- else
- printk ("Extended Message, reserved code (0x%02x) ",
- (int) msg[2]);
- switch (msg[2]) {
- case EXTENDED_MODIFY_DATA_POINTER:
- printk("pointer = %d", (int) (msg[3] << 24) |
- (msg[4] << 16) | (msg[5] << 8) | msg[6]);
- break;
- case EXTENDED_SDTR:
- printk("period = %d ns, offset = %d",
- (int) msg[3] * 4, (int) msg[4]);
- break;
- case EXTENDED_WDTR:
- printk("width = 2^%d bytes", msg[3]);
- break;
- default:
- for (i = 2; i < len; ++i)
- printk("%02x ", msg[i]);
- }
- /* Identify */
- } else if (msg[0] & 0x80) {
- printk("Identify disconnect %sallowed %s %d ",
- (msg[0] & 0x40) ? "" : "not ",
- (msg[0] & 0x20) ? "target routine" : "lun",
- msg[0] & 0x7);
- len = 1;
- /* Normal One byte */
- } else if (msg[0] < 0x1f) {
- if (msg[0] < NO_ONE_BYTE_MSGS)
- printk(one_byte_msgs[msg[0]]);
- else
- printk("reserved (%02x) ", msg[0]);
- len = 1;
- /* Two byte */
- } else if (msg[0] <= 0x2f) {
- if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS)
- printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
- msg[1]);
- else
- printk("reserved two byte (%02x %02x) ",
- msg[0], msg[1]);
- len = 2;
- } else
- printk("reserved");
- return len;
-}
-EXPORT_SYMBOL(scsi_print_msg);
-
-#else /* ifndef CONFIG_SCSI_CONSTANTS */
-
-int scsi_print_msg (const unsigned char *msg)
-{
- int len = 0, i;
-
- if (msg[0] == EXTENDED_MESSAGE) {
- len = 3 + msg[1];
- for (i = 0; i < len; ++i)
- printk("%02x ", msg[i]);
- /* Identify */
- } else if (msg[0] & 0x80) {
- printk("%02x ", msg[0]);
- len = 1;
- /* Normal One byte */
- } else if (msg[0] < 0x1f) {
- printk("%02x ", msg[0]);
- len = 1;
- /* Two byte */
- } else if (msg[0] <= 0x2f) {
- printk("%02x %02x", msg[0], msg[1]);
- len = 2;
- } else
- printk("%02x ", msg[0]);
- return len;
-}
-EXPORT_SYMBOL(scsi_print_msg);
-#endif /* ! CONFIG_SCSI_CONSTANTS */
-
void scsi_print_command(struct scsi_cmnd *cmd)
{
/* Assume appended output (i.e. not at start of line) */
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 4002a98ab16..00a73fc23fc 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/config.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -1047,6 +1048,114 @@ void spi_display_xfer_agreement(struct scsi_target *starget)
}
EXPORT_SYMBOL(spi_display_xfer_agreement);
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * const one_byte_msgs[] = {
+/* 0x00 */ "Command Complete", NULL, "Save Pointers",
+/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
+/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
+/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
+/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
+/* 0x0f */ "Initiate Recovery", "Release Recovery"
+};
+#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *))
+
+static const char * const two_byte_msgs[] = {
+/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag"
+/* 0x23 */ "Ignore Wide Residue"
+};
+#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
+
+static const char * const extended_msgs[] = {
+/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
+/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request"
+};
+#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
+
+
+int scsi_print_msg (const unsigned char *msg)
+{
+ int len = 0, i;
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ if (msg[2] < NO_EXTENDED_MSGS)
+ printk ("%s ", extended_msgs[msg[2]]);
+ else
+ printk ("Extended Message, reserved code (0x%02x) ",
+ (int) msg[2]);
+ switch (msg[2]) {
+ case EXTENDED_MODIFY_DATA_POINTER:
+ printk("pointer = %d", (int) (msg[3] << 24) |
+ (msg[4] << 16) | (msg[5] << 8) | msg[6]);
+ break;
+ case EXTENDED_SDTR:
+ printk("period = %d ns, offset = %d",
+ (int) msg[3] * 4, (int) msg[4]);
+ break;
+ case EXTENDED_WDTR:
+ printk("width = 2^%d bytes", msg[3]);
+ break;
+ default:
+ for (i = 2; i < len; ++i)
+ printk("%02x ", msg[i]);
+ }
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("Identify disconnect %sallowed %s %d ",
+ (msg[0] & 0x40) ? "" : "not ",
+ (msg[0] & 0x20) ? "target routine" : "lun",
+ msg[0] & 0x7);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ if (msg[0] < NO_ONE_BYTE_MSGS)
+ printk(one_byte_msgs[msg[0]]);
+ else
+ printk("reserved (%02x) ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS)
+ printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
+ msg[1]);
+ else
+ printk("reserved two byte (%02x %02x) ",
+ msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("reserved");
+ return len;
+}
+EXPORT_SYMBOL(scsi_print_msg);
+
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+
+int scsi_print_msg (const unsigned char *msg)
+{
+ int len = 0, i;
+
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ for (i = 0; i < len; ++i)
+ printk("%02x ", msg[i]);
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ printk("%02x %02x", msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("%02x ", msg[0]);
+ return len;
+}
+EXPORT_SYMBOL(scsi_print_msg);
+#endif /* ! CONFIG_SCSI_CONSTANTS */
+
#define SETUP_ATTRIBUTE(field) \
i->private_attrs[count] = class_device_attr_##field; \
if (!i->f->set_##field) { \