aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-at91/board.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-at91/board.h')
-rw-r--r--include/asm-arm/arch-at91/board.h172
1 files changed, 0 insertions, 172 deletions
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
deleted file mode 100644
index 48bbd854f57..00000000000
--- a/include/asm-arm/arch-at91/board.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * include/asm-arm/arch-at91/board.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers. For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
-struct at91_udc_data {
- u8 vbus_pin; /* high == host powering us */
- u8 pullup_pin; /* active == D+ pulled up */
- u8 pullup_active_low; /* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
- u8 irq_pin; /* I/O IRQ */
- u8 det_pin; /* Card detect */
- u8 vcc_pin; /* power switching */
- u8 rst_pin; /* card reset */
- u8 chipselect; /* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
- u8 det_pin; /* card detect IRQ */
- unsigned slot_b:1; /* uses Slot B */
- unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
- u8 wp_pin; /* (SD) writeprotect detect */
- u8 vcc_pin; /* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
- u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
-#define eth_platform_data at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
- u8 ports; /* number of ports on root hub */
- u8 vbus_pin[]; /* port power-control pin */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct atmel_nand_data {
- u8 enable_pin; /* chip enable */
- u8 det_pin; /* card detect */
- u8 rdy_pin; /* ready/busy */
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS 0x01
-#define ATMEL_UART_RTS 0x02
-#define ATMEL_UART_DSR 0x04
-#define ATMEL_UART_DTR 0x08
-#define ATMEL_UART_DCD 0x10
-#define ATMEL_UART_RI 0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
- * platform devices. Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK 0x01
-#define ATMEL_SSC_TF 0x02
-#define ATMEL_SSC_TD 0x04
-#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK 0x10
-#define ATMEL_SSC_RF 0x20
-#define ATMEL_SSC_RD 0x40
-#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-struct atmel_ac97_data {
- u8 reset_pin; /* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif