diff options
Diffstat (limited to 'include/asm-arm/arch-pxa/mainstone.h')
| -rw-r--r-- | include/asm-arm/arch-pxa/mainstone.h | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h deleted file mode 100644 index 14c862adcaa..00000000000 --- a/include/asm-arm/arch-pxa/mainstone.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mainstone.h - * - * Author: Nicolas Pitre - * Created: Nov 14, 2002 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ASM_ARCH_MAINSTONE_H -#define ASM_ARCH_MAINSTONE_H - -#define MST_ETH_PHYS PXA_CS4_PHYS - -#define MST_FPGA_PHYS PXA_CS2_PHYS -#define MST_FPGA_VIRT (0xf0000000) -#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) -#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) - -#ifndef __ASSEMBLY__ -# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) -#else -# define __MST_REG(x) MST_P2V(x) -#endif - -/* board level registers in the FPGA */ - -#define MST_LEDDAT1 __MST_REG(0x08000010) -#define MST_LEDDAT2 __MST_REG(0x08000014) -#define MST_LEDCTRL __MST_REG(0x08000040) -#define MST_GPSWR __MST_REG(0x08000060) -#define MST_MSCWR1 __MST_REG(0x08000080) -#define MST_MSCWR2 __MST_REG(0x08000084) -#define MST_MSCWR3 __MST_REG(0x08000088) -#define MST_MSCRD __MST_REG(0x08000090) -#define MST_INTMSKENA __MST_REG(0x080000c0) -#define MST_INTSETCLR __MST_REG(0x080000d0) -#define MST_PCMCIA0 __MST_REG(0x080000e0) -#define MST_PCMCIA1 __MST_REG(0x080000e4) - -#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ -#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ -#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ -#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ -#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ -#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ -#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ -#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ -#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ - -#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ -#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ -#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ -#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ -#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ - -#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ -#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ -#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ -#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ -#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ - -#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ -#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ -#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ -#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ -#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ -#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ -#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ - -#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ -#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ -#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ - -#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ -#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ -#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ -#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ -#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ -#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ -#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ -#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ -#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ -#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ - -#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ -#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ -#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ -#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ -#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ -#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ -#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ -#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ -#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ -#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ -#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ -#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ -#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ -#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ - -#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ -#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ -#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ -#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ -#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ -#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ -#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ -#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ - -#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ -#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ -#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ -#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ -#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ -#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ - -#endif |