diff options
Diffstat (limited to 'include/asm-ia64/bitops.h')
| -rw-r--r-- | include/asm-ia64/bitops.h | 468 |
1 files changed, 0 insertions, 468 deletions
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h deleted file mode 100644 index e2ca8003733..00000000000 --- a/include/asm-ia64/bitops.h +++ /dev/null @@ -1,468 +0,0 @@ -#ifndef _ASM_IA64_BITOPS_H -#define _ASM_IA64_BITOPS_H - -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * - * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 - * O(1) scheduler patch - */ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <linux/compiler.h> -#include <linux/types.h> -#include <asm/intrinsics.h> - -/** - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - * - * The address must be (at least) "long" aligned. - * Note that there are driver (e.g., eepro100) which use these operations to - * operate on hw-defined data-structures, so we can't easily change these - * operations to force a bigger alignment. - * - * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). - */ -static __inline__ void -set_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = 1 << (nr & 31); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old | bit; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * __set_bit - Set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * Unlike set_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__set_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31)); -} - -/* - * clear_bit() has "acquire" semantics. - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() do { /* skip */; } while (0) - -/** - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static __inline__ void -clear_bit (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * clear_bit_unlock - Clears a bit in memory with release - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit_unlock() is atomic and may not be reordered. It does - * contain a memory barrier suitable for unlock type operations. - */ -static __inline__ void -clear_bit_unlock (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_rel(m, old, new) != old); -} - -/** - * __clear_bit_unlock - Non-atomically clears a bit in memory with release - * @nr: Bit to clear - * @addr: Address to start counting from - * - * Similarly to clear_bit_unlock, the implementation uses a store - * with release semantics. See also __raw_spin_unlock(). - */ -static __inline__ void -__clear_bit_unlock(int nr, void *addr) -{ - __u32 * const m = (__u32 *) addr + (nr >> 5); - __u32 const new = *m & ~(1 << (nr & 31)); - - ia64_st4_rel_nta(m, new); -} - -/** - * __clear_bit - Clears a bit in memory (non-atomic version) - * @nr: the bit to clear - * @addr: the address to start counting from - * - * Unlike clear_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__clear_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31)); -} - -/** - * change_bit - Toggle a bit in memory - * @nr: Bit to toggle - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static __inline__ void -change_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = (1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old ^ bit; - } while (cmpxchg_acq(m, old, new) != old); -} - -/** - * __change_bit - Toggle a bit in memory - * @nr: the bit to toggle - * @addr: the address to start counting from - * - * Unlike change_bit(), this function is non-atomic and may be reordered. - * If it's called on the same region of memory simultaneously, the effect - * may be that only one operation succeeds. - */ -static __inline__ void -__change_bit (int nr, volatile void *addr) -{ - *((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31)); -} - -/** - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_set_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = 1 << (nr & 31); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old | bit; - } while (cmpxchg_acq(m, old, new) != old); - return (old & bit) != 0; -} - -/** - * test_and_set_bit_lock - Set a bit and return its old value for lock - * @nr: Bit to set - * @addr: Address to count from - * - * This is the same as test_and_set_bit on ia64 - */ -#define test_and_set_bit_lock test_and_set_bit - -/** - * __test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int -__test_and_set_bit (int nr, volatile void *addr) -{ - __u32 *p = (__u32 *) addr + (nr >> 5); - __u32 m = 1 << (nr & 31); - int oldbitset = (*p & m) != 0; - - *p |= m; - return oldbitset; -} - -/** - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_clear_bit (int nr, volatile void *addr) -{ - __u32 mask, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - mask = ~(1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old & mask; - } while (cmpxchg_acq(m, old, new) != old); - return (old & ~mask) != 0; -} - -/** - * __test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - * If two examples of this operation race, one can appear to succeed - * but actually fail. You must protect multiple accesses with a lock. - */ -static __inline__ int -__test_and_clear_bit(int nr, volatile void * addr) -{ - __u32 *p = (__u32 *) addr + (nr >> 5); - __u32 m = 1 << (nr & 31); - int oldbitset = *p & m; - - *p &= ~m; - return oldbitset; -} - -/** - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies the acquisition side of the memory barrier. - */ -static __inline__ int -test_and_change_bit (int nr, volatile void *addr) -{ - __u32 bit, old, new; - volatile __u32 *m; - CMPXCHG_BUGCHECK_DECL - - m = (volatile __u32 *) addr + (nr >> 5); - bit = (1 << (nr & 31)); - do { - CMPXCHG_BUGCHECK(m); - old = *m; - new = old ^ bit; - } while (cmpxchg_acq(m, old, new) != old); - return (old & bit) != 0; -} - -/** - * __test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is non-atomic and can be reordered. - */ -static __inline__ int -__test_and_change_bit (int nr, void *addr) -{ - __u32 old, bit = (1 << (nr & 31)); - __u32 *m = (__u32 *) addr + (nr >> 5); - - old = *m; - *m = old ^ bit; - return (old & bit) != 0; -} - -static __inline__ int -test_bit (int nr, const volatile void *addr) -{ - return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31)); -} - -/** - * ffz - find the first zero bit in a long word - * @x: The long word to find the bit in - * - * Returns the bit-number (0..63) of the first (least significant) zero bit. - * Undefined if no zero exists, so code should check against ~0UL first... - */ -static inline unsigned long -ffz (unsigned long x) -{ - unsigned long result; - - result = ia64_popcnt(x & (~x - 1)); - return result; -} - -/** - * __ffs - find first bit in word. - * @x: The word to search - * - * Undefined if no bit exists, so code should check against 0 first. - */ -static __inline__ unsigned long -__ffs (unsigned long x) -{ - unsigned long result; - - result = ia64_popcnt((x-1) & ~x); - return result; -} - -#ifdef __KERNEL__ - -/* - * Return bit number of last (most-significant) bit set. Undefined - * for x==0. Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3). - */ -static inline unsigned long -ia64_fls (unsigned long x) -{ - long double d = x; - long exp; - - exp = ia64_getf_exp(d); - return exp - 0xffff; -} - -/* - * Find the last (most significant) bit set. Returns 0 for x==0 and - * bits are numbered from 1..32 (e.g., fls(9) == 4). - */ -static inline int -fls (int t) -{ - unsigned long x = t & 0xffffffffu; - - if (!x) - return 0; - x |= x >> 1; - x |= x >> 2; - x |= x >> 4; - x |= x >> 8; - x |= x >> 16; - return ia64_popcnt(x); -} - -/* - * Find the last (most significant) bit set. Undefined for x==0. - * Bits are numbered from 0..63 (e.g., __fls(9) == 3). - */ -static inline unsigned long -__fls (unsigned long x) -{ - x |= x >> 1; - x |= x >> 2; - x |= x >> 4; - x |= x >> 8; - x |= x >> 16; - x |= x >> 32; - return ia64_popcnt(x) - 1; -} - -#include <asm-generic/bitops/fls64.h> - -/* - * ffs: find first bit set. This is defined the same way as the libc and - * compiler builtin ffs routines, therefore differs in spirit from the above - * ffz (man ffs): it operates on "int" values only and the result value is the - * bit number + 1. ffs(0) is defined to return zero. - */ -#define ffs(x) __builtin_ffs(x) - -/* - * hweightN: returns the hamming weight (i.e. the number - * of bits set) of a N-bit word - */ -static __inline__ unsigned long -hweight64 (unsigned long x) -{ - unsigned long result; - result = ia64_popcnt(x); - return result; -} - -#define hweight32(x) (unsigned int) hweight64((x) & 0xfffffffful) -#define hweight16(x) (unsigned int) hweight64((x) & 0xfffful) -#define hweight8(x) (unsigned int) hweight64((x) & 0xfful) - -#endif /* __KERNEL__ */ - -#include <asm-generic/bitops/find.h> - -#ifdef __KERNEL__ - -#include <asm-generic/bitops/ext2-non-atomic.h> - -#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) -#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) - -#include <asm-generic/bitops/minix.h> -#include <asm-generic/bitops/sched.h> - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_BITOPS_H */ |