aboutsummaryrefslogtreecommitdiff
path: root/include/asm-mips/mach-cobalt/cobalt.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/mach-cobalt/cobalt.h')
-rw-r--r--include/asm-mips/mach-cobalt/cobalt.h61
1 files changed, 2 insertions, 59 deletions
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index 9c9d2b998ca..a79e7caf3a8 100644
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -12,71 +12,16 @@
#ifndef __ASM_COBALT_H
#define __ASM_COBALT_H
-#include <irq.h>
-
-/*
- * i8259 legacy interrupts used on Cobalt:
- *
- * 8 - RTC
- * 9 - PCI
- * 14 - IDE0
- * 15 - IDE1
- */
-#define COBALT_QUBE_SLOT_IRQ 9
-
-/*
- * CPU IRQs are 16 ... 23
- */
-#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE
-
-#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
-#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3)
-#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3)
-#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4)
-#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4)
-#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5)
-#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5)
-#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */
-
/*
- * PCI configuration space manifest constants. These are wired into
- * the board layout according to the PCI spec to enable the software
- * to probe the hardware configuration space in a well defined manner.
- *
- * The PCI_DEVSHFT() macro transforms these values into numbers
- * suitable for passing as the dev parameter to the various
- * pcibios_read/write_config routines.
+ * The Cobalt board ID information.
*/
-#define COBALT_PCICONF_CPU 0x06
-#define COBALT_PCICONF_ETH0 0x07
-#define COBALT_PCICONF_RAQSCSI 0x08
-#define COBALT_PCICONF_VIA 0x09
-#define COBALT_PCICONF_PCISLOT 0x0A
-#define COBALT_PCICONF_ETH1 0x0C
-
+extern int cobalt_board_id;
-/*
- * The Cobalt board id information. The boards have an ID number wired
- * into the VIA that is available in the high nibble of register 94.
- * This register is available in the VIA configuration space through the
- * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
- */
-#define VIA_COBALT_BRD_ID_REG 0x94
-#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4)
#define COBALT_BRD_ID_QUBE1 0x3
#define COBALT_BRD_ID_RAQ1 0x4
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
-extern int cobalt_board_id;
-
-#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
-# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
-# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
-# define COBALT_LED_WEB (1 << 2) /* RaQ */
-# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */
-# define COBALT_LED_RESET 0x0f
-
#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
# define COBALT_KEY_CLEAR (1 << 1)
# define COBALT_KEY_LEFT (1 << 2)
@@ -87,6 +32,4 @@ extern int cobalt_board_id;
# define COBALT_KEY_SELECT (1 << 7)
# define COBALT_KEY_MASK 0xfe
-#define COBALT_UART ((volatile unsigned char *) CKSEG1ADDR(0x1c800000))
-
#endif /* __ASM_COBALT_H */