diff options
Diffstat (limited to 'include/asm-mips/serial.h')
| -rw-r--r-- | include/asm-mips/serial.h | 84 |
1 files changed, 0 insertions, 84 deletions
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index 8a70ff58f76..4eed8e2acdc 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -29,32 +29,6 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS -#define FOURPORT_FLAGS ASYNC_FOURPORT -#define ACCENT_FLAGS 0 -#define BOCA_FLAGS 0 -#define HUB6_FLAGS 0 -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE -#endif - -/* - * The following define the access methods for the HUB6 card. All - * access is through two ports for all 24 possible chips. The card is - * selected through the high 2 bits, the port on that card with the - * "middle" 3 bits, and the register on that port with the bottom - * 3 bits. - * - * While the access port and interrupt is configurable, the default - * port locations are 0x302 for the port control register, and 0x303 - * for the data read/write register. Normally, the interrupt is at irq3 - * but can be anything from 3 to 7 inclusive. Note that using 3 will - * require disabling com2. - */ - -#define C_P(card,port) (((card)<<6|(port)<<3) + 1) - #ifdef CONFIG_MACH_JAZZ #include <asm/jazz.h> @@ -240,66 +214,10 @@ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ -#ifdef CONFIG_SERIAL_MANY_PORTS -#define EXTRA_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \ - { 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS }, /* ttyS5 */ \ - { 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS }, /* ttyS6 */ \ - { 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS }, /* ttyS7 */ \ - { 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS }, /* ttyS8 */ \ - { 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS }, /* ttyS9 */ \ - { 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS }, /* ttyS10 */ \ - { 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS }, /* ttyS11 */ \ - { 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS }, /* ttyS12 */ \ - { 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS }, /* ttyS13 */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS14 (spare) */ \ - { 0, BASE_BAUD, 0x000, 0, 0 }, /* ttyS15 (spare) */ \ - { 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS }, /* ttyS16 */ \ - { 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS }, /* ttyS17 */ \ - { 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS }, /* ttyS18 */ \ - { 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS }, /* ttyS19 */ \ - { 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS }, /* ttyS20 */ \ - { 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS }, /* ttyS21 */ \ - { 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS }, /* ttyS22 */ \ - { 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS }, /* ttyS23 */ \ - { 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS }, /* ttyS24 */ \ - { 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS }, /* ttyS25 */ \ - { 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS }, /* ttyS26 */ \ - { 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS }, /* ttyS27 */ \ - { 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS }, /* ttyS28 */ \ - { 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS }, /* ttyS29 */ \ - { 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS }, /* ttyS30 */ \ - { 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS }, /* ttyS31 */ -#else /* CONFIG_SERIAL_MANY_PORTS */ -#define EXTRA_SERIAL_PORT_DEFNS -#endif /* CONFIG_SERIAL_MANY_PORTS */ - #else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ #define STD_SERIAL_PORT_DEFNS -#define EXTRA_SERIAL_PORT_DEFNS #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ -/* You can have up to four HUB6's in the system, but I've only - * included two cards here for a total of twelve ports. - */ -#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS)) -#define HUB6_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) }, /* ttyS32 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) }, /* ttyS33 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) }, /* ttyS34 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) }, /* ttyS35 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) }, /* ttyS36 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) }, /* ttyS37 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) }, /* ttyS38 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) }, /* ttyS39 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) }, /* ttyS40 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) }, /* ttyS41 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) }, /* ttyS42 */ \ - { 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) }, /* ttyS43 */ -#else -#define HUB6_SERIAL_PORT_DFNS -#endif - #ifdef CONFIG_MOMENCO_JAGUAR_ATX /* Ordinary NS16552 duart with a 20MHz crystal. */ #define JAGUAR_ATX_UART_CLK 20000000 @@ -427,8 +345,6 @@ COBALT_SERIAL_PORT_DEFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ - EXTRA_SERIAL_PORT_DEFNS \ - HUB6_SERIAL_PORT_DFNS \ IP32_SERIAL_PORT_DEFNS \ ITE_SERIAL_PORT_DEFNS \ IVR_SERIAL_PORT_DEFNS \ |