diff options
Diffstat (limited to 'include/asm-mips')
78 files changed, 2434 insertions, 1523 deletions
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index c6275088cf6..0b3ff9c4840 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -129,28 +129,12 @@ #define PHYS_TO_XKPHYS(cm,a) (_CONST64_(0x8000000000000000) | \ ((cm)<<59) | (a)) -#if defined (CONFIG_CPU_R4300) \ - || defined (CONFIG_CPU_R4X00) \ - || defined (CONFIG_CPU_R5000) \ - || defined (CONFIG_CPU_RM7000) \ - || defined (CONFIG_CPU_NEVADA) \ - || defined (CONFIG_CPU_TX49XX) \ - || defined (CONFIG_CPU_MIPS64) -#define TO_PHYS_MASK _CONST64_(0x0000000fffffffff) /* 2^^36 - 1 */ -#endif - -#if defined (CONFIG_CPU_R8000) -/* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */ -#define TO_PHYS_MASK _CONST64_(0x000000ffffffffff) /* 2^^40 - 1 */ -#endif - -#if defined (CONFIG_CPU_R10000) -#define TO_PHYS_MASK _CONST64_(0x000000ffffffffff) /* 2^^40 - 1 */ -#endif - -#if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A) -#define TO_PHYS_MASK _CONST64_(0x00000fffffffffff) /* 2^^44 - 1 */ -#endif +/* + * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * R8000 implements most with its 48-bit physical address space. + */ +#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ #ifndef CONFIG_CPU_R8000 diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h index 92e62ef711e..c5f20df780e 100644 --- a/include/asm-mips/asmmacro.h +++ b/include/asm-mips/asmmacro.h @@ -52,21 +52,6 @@ .endm #endif /* CONFIG_MIPS_MT_SMTC */ -#ifdef CONFIG_CPU_SB1 - .macro fpu_enable_hazard - .set push - .set noreorder - .set mips2 - SSNOP - bnezl $0, .+4 - SSNOP - .set pop - .endm -#else - .macro fpu_enable_hazard - .endm -#endif - /* * Temporary until all gas have MT ASE support */ diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index d995413e11f..d9e81af53f7 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -238,10 +238,11 @@ static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { unsigned short bit = nr & SZLONG_MASK; + unsigned long res; if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set mips3 \n" @@ -254,11 +255,9 @@ static inline int test_and_set_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; } else if (cpu_has_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set push \n" @@ -277,25 +276,22 @@ static inline int test_and_set_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; } else { volatile unsigned long *a = addr; unsigned long mask; - int retval; unsigned long flags; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - retval = (mask & *a) != 0; + res = (mask & *a); *a |= mask; raw_local_irq_restore(flags); - - return retval; } smp_mb(); + + return res != 0; } /* @@ -310,10 +306,11 @@ static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { unsigned short bit = nr & SZLONG_MASK; + unsigned long res; if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set mips3 \n" @@ -327,12 +324,10 @@ static inline int test_and_clear_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; #ifdef CONFIG_CPU_MIPSR2 } else if (__builtin_constant_p(nr)) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( "1: " __LL "%0, %1 # test_and_clear_bit \n" @@ -346,12 +341,10 @@ static inline int test_and_clear_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "ri" (bit), "m" (*m) : "memory"); - - return res; #endif } else if (cpu_has_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set push \n" @@ -371,25 +364,22 @@ static inline int test_and_clear_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; } else { volatile unsigned long *a = addr; unsigned long mask; - int retval; unsigned long flags; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - retval = (mask & *a) != 0; + res = (mask & *a); *a &= ~mask; raw_local_irq_restore(flags); - - return retval; } smp_mb(); + + return res != 0; } /* @@ -404,10 +394,11 @@ static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { unsigned short bit = nr & SZLONG_MASK; + unsigned long res; if (cpu_has_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set mips3 \n" @@ -420,11 +411,9 @@ static inline int test_and_change_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; } else if (cpu_has_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp, res; + unsigned long temp; __asm__ __volatile__( " .set push \n" @@ -443,24 +432,22 @@ static inline int test_and_change_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - - return res != 0; } else { volatile unsigned long *a = addr; - unsigned long mask, retval; + unsigned long mask; unsigned long flags; a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); - retval = (mask & *a) != 0; + res = (mask & *a); *a ^= mask; raw_local_irq_restore(flags); - - return retval; } smp_mb(); + + return res != 0; } #include <asm-generic/bitops/non-atomic.h> diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index b0c329783ac..087126a5faf 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -109,18 +109,12 @@ #define MACH_COSINE_ORION 0 /* - * Valid machtype for group GALILEO - */ -#define MACH_GROUP_GALILEO 11 /* Galileo Eval Boards */ -#define MACH_EV64120A 0 /* EV64120A */ - -/* * Valid machtype for group MOMENCO */ #define MACH_GROUP_MOMENCO 12 /* Momentum Boards */ #define MACH_MOMENCO_OCELOT 0 #define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */ -#define MACH_MOMENCO_OCELOT_C 2 +#define MACH_MOMENCO_OCELOT_C 2 /* no more supported (jun 2007) */ #define MACH_MOMENCO_JAGUAR_ATX 3 /* no more supported (may 2007) */ #define MACH_MOMENCO_OCELOT_3 4 @@ -194,13 +188,6 @@ #define MACH_HP_LASERJET 1 /* - * Valid machtype for group LASAT - */ -#define MACH_GROUP_LASAT 21 -#define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */ -#define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */ - -/* * Valid machtype for group TITAN */ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ @@ -213,6 +200,27 @@ #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ +/* + * Valid machtype for group LEMOTE + */ +#define MACH_GROUP_LEMOTE 27 +#define MACH_LEMOTE_FULONG 0 + +/* + * Valid machtype for group PMC-MSP + */ +#define MACH_GROUP_MSP 26 /* PMC-Sierra MSP boards/CPUs */ +#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ +#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ +#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ +#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ +#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ +#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ +#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ + +#define MACH_GROUP_WINDRIVER 28 /* Windriver boards */ +#define MACH_WRPPMC 1 + #define CL_SIZE COMMAND_LINE_SIZE const char *get_system_type(void); diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h index c4a1ec31ff6..df7f2deb3b5 100644 --- a/include/asm-mips/cacheops.h +++ b/include/asm-mips/cacheops.h @@ -20,7 +20,11 @@ #define Index_Load_Tag_D 0x05 #define Index_Store_Tag_I 0x08 #define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else #define Hit_Invalidate_I 0x10 +#endif #define Hit_Invalidate_D 0x11 #define Hit_Writeback_Inv_D 0x15 diff --git a/include/asm-mips/compat-signal.h b/include/asm-mips/compat-signal.h index 6599a901b63..368a99e5c3e 100644 --- a/include/asm-mips/compat-signal.h +++ b/include/asm-mips/compat-signal.h @@ -10,6 +10,68 @@ #include <asm/uaccess.h> +#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) + +typedef struct compat_siginfo { + int si_signo; + int si_code; + int si_errno; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* IRIX SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_clock_t _utime; + int _status; /* exit code */ + compat_clock_t _stime; + } _irix_sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + s32 _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL, SIGXFSZ (To do ...) */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval;/* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + } _sifields; +} compat_siginfo_t; + static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, const sigset_t *s) { diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h index 432653d7ae0..67c3f8ec030 100644 --- a/include/asm-mips/compat.h +++ b/include/asm-mips/compat.h @@ -132,7 +132,8 @@ typedef u32 compat_uptr_t; static inline void __user *compat_ptr(compat_uptr_t uptr) { - return (void __user *)(long)uptr; + /* cast to a __user pointer via "unsigned long" makes sparse happy */ + return (void __user *)(unsigned long)(long)uptr; } static inline compat_uptr_t ptr_to_compat(void __user *uptr) diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h index 5e4bed123b4..d95a83e3e1d 100644 --- a/include/asm-mips/cpu-features.h +++ b/include/asm-mips/cpu-features.h @@ -150,6 +150,10 @@ #define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT) #endif +#ifndef cpu_has_userlocal +#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI) +#endif + #ifdef CONFIG_32BIT # ifndef cpu_has_nofpuex # define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX) diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index d38fdbf845b..3857358fb6d 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -89,6 +89,8 @@ #define PRID_IMP_34K 0x9500 #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 +#define PRID_IMP_LOONGSON1 0x4200 +#define PRID_IMP_LOONGSON2 0x6300 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE @@ -107,6 +109,7 @@ * Definitions for 7:0 on legacy processors */ +#define PRID_REV_MASK 0x00ff #define PRID_REV_TX4927 0x0022 #define PRID_REV_TX4937 0x0030 @@ -123,6 +126,18 @@ #define PRID_REV_VR4122 0x0070 #define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ #define PRID_REV_VR4130 0x0080 +#define PRID_REV_34K_V1_0_2 0x0022 + +/* + * Older processors used to encode processor version and revision in two + * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores + * have switched to use the 8-bits as 3:3:2 bitfield with the last field as + * the patch number. *ARGH* + */ +#define PRID_REV_ENCODE_44(ver, rev) \ + ((ver) << 4 | (rev)) +#define PRID_REV_ENCODE_332(ver, rev, patch) \ + ((ver) << 5 | (rev) << 2 | (patch)) /* * FPU implementation/revision register (CP1 control register 0). @@ -200,7 +215,10 @@ #define CPU_SB1A 62 #define CPU_74K 63 #define CPU_R14000 64 -#define CPU_LAST 64 +#define CPU_LOONGSON1 65 +#define CPU_LOONGSON2 66 + +#define CPU_LAST 66 /* * ISA Level encodings @@ -246,6 +264,7 @@ #define MIPS_CPU_PREFETCH 0x00080000 /* CPU has usable prefetch */ #define MIPS_CPU_VINT 0x00100000 /* CPU supports MIPSR2 vectored interrupts */ #define MIPS_CPU_VEIC 0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */ +#define MIPS_CPU_ULRI 0x00400000 /* CPU has ULRI feature */ /* * CPU ASE encodings diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h index 66189f5f639..716371bd098 100644 --- a/include/asm-mips/div64.h +++ b/include/asm-mips/div64.h @@ -20,7 +20,7 @@ */ #define do_div64_32(res, high, low, base) ({ \ - unsigned long __quot, __mod; \ + unsigned long __quot32, __mod32; \ unsigned long __cf, __tmp, __tmp2, __i; \ \ __asm__(".set push\n\t" \ @@ -48,12 +48,13 @@ "bnez %4, 0b\n\t" \ " srl %5, %1, 0x1f\n\t" \ ".set pop" \ - : "=&r" (__mod), "=&r" (__tmp), "=&r" (__quot), "=&r" (__cf), \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ "=&r" (__i), "=&r" (__tmp2) \ : "Jr" (base), "0" (high), "1" (low)); \ \ - (res) = __quot; \ - __mod; }) + (res) = __quot32; \ + __mod32; }) #define do_div(n, base) ({ \ unsigned long long __quot; \ diff --git a/include/asm-mips/gpio.h b/include/asm-mips/gpio.h new file mode 100644 index 00000000000..06e46faf862 --- /dev/null +++ b/include/asm-mips/gpio.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MIPS_GPIO_H +#define __ASM_MIPS_GPIO_H + +#include <gpio.h> + +#endif /* __ASM_MIPS_GPIO_H */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 92ec2618560..7ba92890ea1 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -178,6 +178,11 @@ extern void __iounmap(const volatile void __iomem *addr); static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, unsigned long flags) { + void __iomem *addr = plat_ioremap(offset, size, flags); + + if (addr) + return addr; + #define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL)) if (cpu_has_64bit_addresses) { @@ -207,7 +212,8 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, */ if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) && flags == _CACHE_UNCACHED) - return (void __iomem *)CKSEG1ADDR(phys_addr); + return (void __iomem *) + (unsigned long)CKSEG1ADDR(phys_addr); } return __ioremap(offset, size, flags); @@ -282,6 +288,9 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, static inline void iounmap(const volatile void __iomem *addr) { + if (plat_iounmap(addr)) + return; + #define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) if (cpu_has_64bit_addresses || diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h index 91803ba30ff..97102ebc54b 100644 --- a/include/asm-mips/irq.h +++ b/include/asm-mips/irq.h @@ -24,7 +24,7 @@ static inline int irq_canonicalize(int irq) #define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ #endif -#ifdef CONFIG_MIPS_MT_SMTC +#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* * Clear interrupt mask handling "backstop" if irq_hwmask * entry so indicates. This implies that the ack() or end() @@ -72,4 +72,13 @@ extern int allocate_irqno(void); extern void alloc_legacy_irqno(void); extern void free_irqno(unsigned int irq); +/* + * Before R2 the timer and performance counter interrupts were both fixed to + * IE7. Since R2 their number has to be read from the c0_intctl register. + */ +#define CP0_LEGACY_COMPARE_IRQ 7 + +extern int cp0_compare_irq; +extern int cp0_perfcount_irq; + #endif /* _ASM_IRQ_H */ diff --git a/include/asm-mips/lasat/ds1603.h b/include/asm-mips/lasat/ds1603.h deleted file mode 100644 index edcd7544b35..00000000000 --- a/include/asm-mips/lasat/ds1603.h +++ /dev/null @@ -1,18 +0,0 @@ -#include <asm/addrspace.h> - -/* Lasat 100 */ -#define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) -#define DS1603_RST_100 (1 << 2) -#define DS1603_CLK_100 (1 << 0) -#define DS1603_DATA_SHIFT_100 1 -#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100) - -/* Lasat 200 */ -#define DS1603_REG_200 (KSEG1ADDR(0x11000000)) -#define DS1603_RST_200 (1 << 3) -#define DS1603_CLK_200 (1 << 4) -#define DS1603_DATA_200 (1 << 5) - -#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000) -#define DS1603_DATA_READ_SHIFT_200 9 -#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200) diff --git a/include/asm-mips/lasat/eeprom.h b/include/asm-mips/lasat/eeprom.h deleted file mode 100644 index 7b53edd5cd5..00000000000 --- a/include/asm-mips/lasat/eeprom.h +++ /dev/null @@ -1,17 +0,0 @@ -#include <asm/addrspace.h> - -/* lasat 100 */ -#define AT93C_REG_100 KSEG1ADDR(0x1c810000) -#define AT93C_RDATA_REG_100 AT93C_REG_100 -#define AT93C_RDATA_SHIFT_100 4 -#define AT93C_WDATA_SHIFT_100 4 -#define AT93C_CS_M_100 ( 1 << 5 ) -#define AT93C_CLK_M_100 ( 1 << 3 ) - -/* lasat 200 */ -#define AT93C_REG_200 KSEG1ADDR(0x11000000) -#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000) -#define AT93C_RDATA_SHIFT_200 8 -#define AT93C_WDATA_SHIFT_200 2 -#define AT93C_CS_M_200 ( 1 << 0 ) -#define AT93C_CLK_M_200 ( 1 << 1 ) diff --git a/include/asm-mips/lasat/head.h b/include/asm-mips/lasat/head.h deleted file mode 100644 index f5589f31a19..00000000000 --- a/include/asm-mips/lasat/head.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Image header stuff - */ -#ifndef _HEAD_H -#define _HEAD_H - -#define LASAT_K_MAGIC0_VAL 0xfedeabba -#define LASAT_K_MAGIC1_VAL 0x00bedead - -#ifndef _LANGUAGE_ASSEMBLY -#include <linux/types.h> -struct bootloader_header { - u32 magic[2]; - u32 version; - u32 image_start; - u32 image_size; - u32 kernel_start; - u32 kernel_entry; -}; -#endif - -#endif /* _HEAD_H */ diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h deleted file mode 100644 index 42077e367a5..00000000000 --- a/include/asm-mips/lasat/lasat.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * lasat.h - * - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Configuration for LASAT boards, loads the appropriate include files. - */ -#ifndef _LASAT_H -#define _LASAT_H - -#ifndef _LANGUAGE_ASSEMBLY - -extern struct lasat_misc { - volatile u32 *reset_reg; - volatile u32 *flash_wp_reg; - u32 flash_wp_bit; -} *lasat_misc; - -enum lasat_mtdparts { - LASAT_MTD_BOOTLOADER, - LASAT_MTD_SERVICE, - LASAT_MTD_NORMAL, - LASAT_MTD_CONFIG, - LASAT_MTD_FS, - LASAT_MTD_LAST -}; - -/* - * The format of the data record in the EEPROM. - * See Documentation/LASAT/eeprom.txt for a detailed description - * of the fields in this struct, and the LASAT Hardware Configuration - * field specification for a detailed description of the config - * field. - */ -#include <linux/types.h> - -#define LASAT_EEPROM_VERSION 7 -struct lasat_eeprom_struct { - unsigned int version; - unsigned int cfg[3]; - unsigned char hwaddr[6]; - unsigned char print_partno[12]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[12]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[16]; - unsigned char pwdnull; - unsigned char vendid; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[11]; - unsigned char debugaccess; - unsigned short prid; - unsigned int serviceflag; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -struct lasat_eeprom_struct_pre7 { - unsigned int version; - unsigned int flags[3]; - unsigned char hwaddr0[6]; - unsigned char hwaddr1[6]; - unsigned char print_partno[9]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[9]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[24]; - unsigned char pwdnull; - unsigned char vendor; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[6]; - unsigned int writecount; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -/* Configuration descriptor encoding - see the doc for details */ - -#define LASAT_W0_DSCTYPE(v) ( ( (v) ) & 0xf ) -#define LASAT_W0_BMID(v) ( ( (v) >> 0x04 ) & 0xf ) -#define LASAT_W0_CPUTYPE(v) ( ( (v) >> 0x08 ) & 0xf ) -#define LASAT_W0_BUSSPEED(v) ( ( (v) >> 0x0c ) & 0xf ) -#define LASAT_W0_CPUCLK(v) ( ( (v) >> 0x10 ) & 0xf ) -#define LASAT_W0_SDRAMBANKSZ(v) ( ( (v) >> 0x14 ) & 0xf ) -#define LASAT_W0_SDRAMBANKS(v) ( ( (v) >> 0x18 ) & 0xf ) -#define LASAT_W0_L2CACHE(v) ( ( (v) >> 0x1c ) & 0xf ) - -#define LASAT_W1_EDHAC(v) ( ( (v) ) & 0xf ) -#define LASAT_W1_HIFN(v) ( ( (v) >> 0x04 ) & 0x1 ) -#define LASAT_W1_ISDN(v) ( ( (v) >> 0x05 ) & 0x1 ) -#define LASAT_W1_IDE(v) ( ( (v) >> 0x06 ) & 0x1 ) -#define LASAT_W1_HDLC(v) ( ( (v) >> 0x07 ) & 0x1 ) -#define LASAT_W1_USVERSION(v) ( ( (v) >> 0x08 ) & 0x1 ) -#define LASAT_W1_4MACS(v) ( ( (v) >> 0x09 ) & 0x1 ) -#define LASAT_W1_EXTSERIAL(v) ( ( (v) >> 0x0a ) & 0x1 ) -#define LASAT_W1_FLASHSIZE(v) ( ( (v) >> 0x0c ) & 0xf ) -#define LASAT_W1_PCISLOTS(v) ( ( (v) >> 0x10 ) & 0xf ) -#define LASAT_W1_PCI1OPT(v) ( ( (v) >> 0x14 ) & 0xf ) -#define LASAT_W1_PCI2OPT(v) ( ( (v) >> 0x18 ) & 0xf ) -#define LASAT_W1_PCI3OPT(v) ( ( (v) >> 0x1c ) & 0xf ) - -/* Routines specific to LASAT boards */ - -#define LASAT_BMID_MASQUERADE2 0 -#define LASAT_BMID_MASQUERADEPRO 1 -#define LASAT_BMID_SAFEPIPE25 2 -#define LASAT_BMID_SAFEPIPE50 3 -#define LASAT_BMID_SAFEPIPE100 4 -#define LASAT_BMID_SAFEPIPE5000 5 -#define LASAT_BMID_SAFEPIPE7000 6 -#define LASAT_BMID_SAFEPIPE1000 7 -//#define LASAT_BMID_SAFEPIPE30 7 -//#define LASAT_BMID_SAFEPIPE5100 8 -//#define LASAT_BMID_SAFEPIPE7100 9 -#define LASAT_BMID_UNKNOWN 0xf -#define LASAT_MAX_BMID_NAMES 9 // no larger than 15! - -#define LASAT_HAS_EDHAC ( 1 << 0 ) -#define LASAT_EDHAC_FAST ( 1 << 1 ) -#define LASAT_HAS_EADI ( 1 << 2 ) -#define LASAT_HAS_HIFN ( 1 << 3 ) -#define LASAT_HAS_ISDN ( 1 << 4 ) -#define LASAT_HAS_LEASEDLINE_IF ( 1 << 5 ) -#define LASAT_HAS_HDC ( 1 << 6 ) - -#define LASAT_PRID_MASQUERADE2 0 -#define LASAT_PRID_MASQUERADEPRO 1 -#define LASAT_PRID_SAFEPIPE25 2 -#define LASAT_PRID_SAFEPIPE50 3 -#define LASAT_PRID_SAFEPIPE100 4 -#define LASAT_PRID_SAFEPIPE5000 5 -#define LASAT_PRID_SAFEPIPE7000 6 -#define LASAT_PRID_SAFEPIPE30 7 -#define LASAT_PRID_SAFEPIPE5100 8 -#define LASAT_PRID_SAFEPIPE7100 9 - -#define LASAT_PRID_SAFEPIPE1110 10 -#define LASAT_PRID_SAFEPIPE3020 11 -#define LASAT_PRID_SAFEPIPE3030 12 -#define LASAT_PRID_SAFEPIPE5020 13 -#define LASAT_PRID_SAFEPIPE5030 14 -#define LASAT_PRID_SAFEPIPE1120 15 -#define LASAT_PRID_SAFEPIPE1130 16 -#define LASAT_PRID_SAFEPIPE6010 17 -#define LASAT_PRID_SAFEPIPE6110 18 -#define LASAT_PRID_SAFEPIPE6210 19 -#define LASAT_PRID_SAFEPIPE1020 20 -#define LASAT_PRID_SAFEPIPE1040 21 -#define LASAT_PRID_SAFEPIPE1060 22 - -struct lasat_info { - unsigned int li_cpu_hz; - unsigned int li_bus_hz; - unsigned int li_bmid; - unsigned int li_memsize; - unsigned int li_flash_size; - unsigned int li_prid; - unsigned char li_bmstr[16]; - unsigned char li_namestr[32]; - unsigned char li_typestr[16]; - /* Info on the Flash layout */ - unsigned int li_flash_base; - unsigned long li_flashpart_base[LASAT_MTD_LAST]; - unsigned long li_flashpart_size[LASAT_MTD_LAST]; - struct lasat_eeprom_struct li_eeprom_info; - unsigned int li_eeprom_upgrade_version; - unsigned int li_debugaccess; -}; - -extern struct lasat_info lasat_board_info; - -static inline unsigned long lasat_flash_partition_start(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_base[partno]; -} - -static inline unsigned long lasat_flash_partition_size(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_size[partno]; -} - -/* Called from setup() to initialize the global board_info struct */ -extern int lasat_init_board_info(void); - -/* Write the modified EEPROM info struct */ -extern void lasat_write_eeprom_info(void); - -#define N_MACHTYPES 2 -/* for calibration of delays */ - -/* the lasat_ndelay function is necessary because it is used at an - * early stage of the boot process where ndelay is not calibrated. - * It is used for the bit-banging rtc and eeprom drivers */ - -#include <asm/delay.h> -/* calculating with the slowest board with 100 MHz clock */ -#define LASAT_100_DIVIDER 20 -/* All 200's run at 250 MHz clock */ -#define LASAT_200_DIVIDER 8 - -extern unsigned int lasat_ndelay_divider; - -static inline void lasat_ndelay(unsigned int ns) -{ - __delay(ns / lasat_ndelay_divider); -} - -#endif /* !defined (_LANGUAGE_ASSEMBLY) */ - -#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef -#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba - -/* Lasat 100 boards */ -#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) - -/* Lasat 200 boards */ -#define Vrc5074_PHYS_BASE 0x1fa00000 -#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) -#define PCI_WINDOW1 0x1a000000 - -#endif /* _LASAT_H */ diff --git a/include/asm-mips/lasat/lasatint.h b/include/asm-mips/lasat/lasatint.h deleted file mode 100644 index 065474feecc..00000000000 --- a/include/asm-mips/lasat/lasatint.h +++ /dev/null @@ -1,12 +0,0 @@ -#define LASATINT_END 16 - -/* lasat 100 */ -#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) -#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) -#define LASATINT_MASK_SHIFT_100 0 - -/* lasat 200 */ -#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASATINT_MASK_SHIFT_200 16 - diff --git a/include/asm-mips/lasat/picvue.h b/include/asm-mips/lasat/picvue.h deleted file mode 100644 index 42a492edc40..00000000000 --- a/include/asm-mips/lasat/picvue.h +++ /dev/null @@ -1,15 +0,0 @@ -/* Lasat 100 */ -#define PVC_REG_100 KSEG1ADDR(0x1c820000) -#define PVC_DATA_SHIFT_100 0 -#define PVC_DATA_M_100 0xFF -#define PVC_E_100 (1 << 8) -#define PVC_RW_100 (1 << 9) -#define PVC_RS_100 (1 << 10) - -/* Lasat 200 */ -#define PVC_REG_200 KSEG1ADDR(0x11000000) -#define PVC_DATA_SHIFT_200 24 -#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200) -#define PVC_E_200 (1 << 16) -#define PVC_RW_200 (1 << 17) -#define PVC_RS_200 (1 << 18) diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h deleted file mode 100644 index 9e88c7669c7..00000000000 --- a/include/asm-mips/lasat/serial.h +++ /dev/null @@ -1,13 +0,0 @@ -#include <asm/lasat/lasat.h> - -/* Lasat 100 boards serial configuration */ -#define LASAT_BASE_BAUD_100 ( 7372800 / 16 ) -#define LASAT_UART_REGS_BASE_100 0x1c8b0000 -#define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 8 - -/* * LASAT 200 boards serial configuration */ -#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) -#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) -#define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 13 diff --git a/include/asm-mips/mach-au1x00/au1xxx_gpio.h b/include/asm-mips/mach-au1x00/au1xxx_gpio.h deleted file mode 100644 index 27911e054ff..00000000000 --- a/include/asm-mips/mach-au1x00/au1xxx_gpio.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __AU1XXX_GPIO_H -#define __AU1XXX_GPIO_H - -void au1xxx_gpio1_set_inputs(void); -void au1xxx_gpio_tristate(int signal); -void au1xxx_gpio_write(int signal, int value); -int au1xxx_gpio_read(int signal); - -typedef volatile struct -{ - u32 dir; - u32 reserved; - u32 output; - u32 pinstate; - u32 inten; - u32 enable; - -} AU1X00_GPIO2; - -#endif //__AU1XXX_GPIO_H diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 8fcae21adbd..4663e8b415c 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -88,26 +88,26 @@ static const struct drive_list_entry dma_white_list [] = { /* * Hitachi */ - { "HITACHI_DK14FA-20" , "ALL" }, - { "HTS726060M9AT00" , "ALL" }, + { "HITACHI_DK14FA-20" , NULL }, + { "HTS726060M9AT00" , NULL }, /* * Maxtor */ - { "Maxtor 6E040L0" , "ALL" }, - { "Maxtor 6Y080P0" , "ALL" }, - { "Maxtor 6Y160P0" , "ALL" }, + { "Maxtor 6E040L0" , NULL }, + { "Maxtor 6Y080P0" , NULL }, + { "Maxtor 6Y160P0" , NULL }, /* * Seagate */ - { "ST3120026A" , "ALL" }, - { "ST320014A" , "ALL" }, - { "ST94011A" , "ALL" }, - { "ST340016A" , "ALL" }, + { "ST3120026A" , NULL }, + { "ST320014A" , NULL }, + { "ST94011A" , NULL }, + { "ST340016A" , NULL }, /* * Western Digital */ - { "WDC WD400UE-00HCT0" , "ALL" }, - { "WDC WD400JB-00JJC0" , "ALL" }, + { "WDC WD400UE-00HCT0" , NULL }, + { "WDC WD400JB-00JJC0" , NULL }, { NULL , NULL } }; @@ -116,9 +116,9 @@ static const struct drive_list_entry dma_black_list [] = { /* * Western Digital */ - { "WDC WD100EB-00CGH0" , "ALL" }, - { "WDC WD200BB-00AUA1" , "ALL" }, - { "WDC AC24300L" , "ALL" }, + { "WDC WD100EB-00CGH0" , NULL }, + { "WDC WD200BB-00AUA1" , NULL }, + { "WDC AC24300L" , NULL }, { NULL , NULL } }; #endif diff --git a/include/asm-mips/mach-au1x00/gpio.h b/include/asm-mips/mach-au1x00/gpio.h new file mode 100644 index 00000000000..2dc61e009a0 --- /dev/null +++ b/include/asm-mips/mach-au1x00/gpio.h @@ -0,0 +1,69 @@ +#ifndef _AU1XXX_GPIO_H_ +#define _AU1XXX_GPIO_H_ + +#include <linux/types.h> + +#define AU1XXX_GPIO_BASE 200 + +struct au1x00_gpio2 { + u32 dir; + u32 reserved; + u32 output; + u32 pinstate; + u32 inten; + u32 enable; +}; + +extern int au1xxx_gpio_get_value(unsigned gpio); +extern void au1xxx_gpio_set_value(unsigned gpio, int value); +extern int au1xxx_gpio_direction_input(unsigned gpio); +extern int au1xxx_gpio_direction_output(unsigned gpio, int value); + + +/* Wrappers for the arch-neutral GPIO API */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + /* Not yet implemented */ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ + /* Not yet implemented */ +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return au1xxx_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return au1xxx_gpio_direction_output(gpio, value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return au1xxx_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + au1xxx_gpio_set_value(gpio, value); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq; +} + +/* For cansleep */ +#include <asm-generic/gpio.h> + +#endif /* _AU1XXX_GPIO_H_ */ diff --git a/include/asm-mips/mach-au1x00/ioremap.h b/include/asm-mips/mach-au1x00/ioremap.h index 098fca4289b..364cea2dc71 100644 --- a/include/asm-mips/mach-au1x00/ioremap.h +++ b/include/asm-mips/mach-au1x00/ioremap.h @@ -28,4 +28,15 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) return __fixup_bigphys_addr(phys_addr, size); } +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + #endif /* __ASM_MACH_AU1X00_IOREMAP_H */ diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h index 684a501c04c..9c9d2b998ca 100644 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ b/include/asm-mips/mach-cobalt/cobalt.h @@ -30,7 +30,6 @@ #define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE #define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) -#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ #define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) #define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) #define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) @@ -71,10 +70,6 @@ extern int cobalt_board_id; -#define PCI_CFG_SET(devfn,where) \ - GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \ - (PCI_FUNC (devfn) << 8) | (where))) - #define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) # define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ # define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ diff --git a/include/asm-mips/mach-ev64120/mach-gt64120.h b/include/asm-mips/mach-ev64120/mach-gt64120.h deleted file mode 100644 index 7e272ce57ea..00000000000 --- a/include/asm-mips/mach-ev64120/mach-gt64120.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H -#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H - -/* - * GT64120 config space base address - */ -extern unsigned long gt64120_base; - -#define GT64120_BASE (gt64120_base) - -/* - * PCI Bus allocation - */ -#define GT_PCI_MEM_BASE 0x12000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL -#define GT_PCI_IO_BASE 0x10000000UL -#define GT_PCI_IO_SIZE 0x02000000UL -#define GT_ISA_IO_BASE PCI_IO_BASE - -/* - * Duart I/O ports. - */ -#define EV64120_COM1_BASE_ADDR (0x1d000000 + 0x20) -#define EV64120_COM2_BASE_ADDR (0x1d000000 + 0x00) - - -/* - * EV64120 interrupt controller register base. - */ -#define EV64120_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000)) - -/* - * EV64120 UART register base. - */ -#define EV64120_UART0_REGS_BASE (KSEG1ADDR(EV64120_COM1_BASE_ADDR)) -#define EV64120_UART1_REGS_BASE (KSEG1ADDR(EV64120_COM2_BASE_ADDR)) -#define EV64120_BASE_BAUD ( 3686400 / 16 ) -#define EV64120_UART_IRQ 6 - -/* - * PCI interrupts will come in on either the INTA or INTD interrups lines, - * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our - * boards, they all either come in on IntD or they all come in on IntA, they - * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the - * "requested" interrupt numbers and go through the list whenever we get an - * IntA/D. - * - * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and - * INTD is 11. - */ -#define GT_TIMER 4 -#define GT_INTA 2 -#define GT_INTD 5 - -#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */ diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h new file mode 100644 index 00000000000..6eaf5efedf3 --- /dev/null +++ b/include/asm-mips/mach-generic/gpio.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MACH_GENERIC_GPIO_H +#define __ASM_MACH_GENERIC_GPIO_H + +int gpio_request(unsigned gpio, const char *label); +void gpio_free(unsigned gpio); +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); +int gpio_get_value(unsigned gpio); +void gpio_set_value(unsigned gpio, int value); +int gpio_to_irq(unsigned gpio); +int irq_to_gpio(unsigned irq); + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +#endif /* __ASM_MACH_GENERIC_GPIO_H */ diff --git a/include/asm-mips/mach-generic/ioremap.h b/include/asm-mips/mach-generic/ioremap.h index 9b64ff6e485..b379938d47f 100644 --- a/include/asm-mips/mach-generic/ioremap.h +++ b/include/asm-mips/mach-generic/ioremap.h @@ -20,4 +20,15 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) return phys_addr; } +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + #endif /* __ASM_MACH_GENERIC_IOREMAP_H */ diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h index 0ae9997bc9a..c9fa4b14968 100644 --- a/include/asm-mips/mach-generic/spaces.h +++ b/include/asm-mips/mach-generic/spaces.h @@ -10,38 +10,54 @@ #ifndef _ASM_MACH_GENERIC_SPACES_H #define _ASM_MACH_GENERIC_SPACES_H +#include <linux/const.h> + +/* + * This gives the physical RAM offset. + */ +#ifndef PHYS_OFFSET +#define PHYS_OFFSET _AC(0, UL) +#endif #ifdef CONFIG_32BIT -#define CAC_BASE 0x80000000 -#define IO_BASE 0xa0000000 -#define UNCAC_BASE 0xa0000000 -#define MAP_BASE 0xc0000000 +#define CAC_BASE _AC(0x80000000, UL) +#define IO_BASE _AC(0xa0000000, UL) +#define UNCAC_BASE _AC(0xa0000000, UL) -/* - * This handles the memory map. - * We handle pages at KSEG0 for kernels with 32 bit address space. - */ -#define PAGE_OFFSET 0x80000000UL +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc0000000, UL) +#endif /* * Memory above this physical address will be considered highmem. */ #ifndef HIGHMEM_START -#define HIGHMEM_START 0x20000000UL +#define HIGHMEM_START _AC(0x20000000, UL) #endif #endif /* CONFIG_32BIT */ #ifdef CONFIG_64BIT -/* - * This handles the memory map. - */ +#ifndef CAC_BASE #ifdef CONFIG_DMA_NONCOHERENT -#define PAGE_OFFSET 0x9800000000000000UL +#define CAC_BASE _AC(0x9800000000000000, UL) #else -#define PAGE_OFFSET 0xa800000000000000UL +#define CAC_BASE _AC(0xa800000000000000, UL) +#endif +#endif + +#ifndef IO_BASE +#define IO_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef UNCAC_BASE +#define UNCAC_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc000000000000000, UL) #endif /* @@ -50,22 +66,20 @@ * in the distant future. Nobody will care for a few years :-) */ #ifndef HIGHMEM_START -#define HIGHMEM_START (1UL << 59UL) +#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) #endif -#ifdef CONFIG_DMA_NONCOHERENT -#define CAC_BASE 0x9800000000000000UL -#else -#define CAC_BASE 0xa800000000000000UL -#endif -#define IO_BASE 0x9000000000000000UL -#define UNCAC_BASE 0x9000000000000000UL -#define MAP_BASE 0xc000000000000000UL - #define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) #define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) #define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) #endif /* CONFIG_64BIT */ +/* + * This handles the memory map. + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) +#endif + #endif /* __ASM_MACH_GENERIC_SPACES_H */ diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h index ab20c026fd1..7f9fa6f6605 100644 --- a/include/asm-mips/mach-ip22/spaces.h +++ b/include/asm-mips/mach-ip22/spaces.h @@ -11,44 +11,17 @@ #define _ASM_MACH_IP22_SPACES_H -#ifdef CONFIG_32BIT - -#define CAC_BASE 0x80000000 -#define IO_BASE 0xa0000000 -#define UNCAC_BASE 0xa0000000 -#define MAP_BASE 0xc0000000 - -/* - * This handles the memory map. - * We handle pages at KSEG0 for kernels with 32 bit address space. - */ -#define PAGE_OFFSET 0x80000000UL - -/* - * Memory above this physical address will be considered highmem. - */ -#ifndef HIGHMEM_START -#define HIGHMEM_START 0x20000000UL -#endif - -#endif /* CONFIG_32BIT */ - #ifdef CONFIG_64BIT -#define PAGE_OFFSET 0xffffffff80000000UL -#ifndef HIGHMEM_START -#define HIGHMEM_START (1UL << 59UL) -#endif +#define PAGE_OFFSET 0xffffffff80000000UL #define CAC_BASE 0xffffffff80000000 #define IO_BASE 0xffffffffa0000000 #define UNCAC_BASE 0xffffffffa0000000 #define MAP_BASE 0xc000000000000000 -#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) -#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) -#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) - #endif /* CONFIG_64BIT */ +#include <asm/mach-generic/spaces.h> + #endif /* __ASM_MACH_IP22_SPACES_H */ diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h index 45e61785ef4..b18802a0b17 100644 --- a/include/asm-mips/mach-ip27/spaces.h +++ b/include/asm-mips/mach-ip27/spaces.h @@ -14,22 +14,17 @@ * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects * uncached memory addressing. */ -#define CAC_BASE 0xa800000000000000 #define HSPEC_BASE 0x9000000000000000 #define IO_BASE 0x9200000000000000 #define MSPEC_BASE 0x9400000000000000 #define UNCAC_BASE 0x9600000000000000 -#define MAP_BASE 0xc000000000000000 -#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) -#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) -#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) #define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK)) #define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK)) -#define PAGE_OFFSET CAC_BASE - #define HIGHMEM_START (~0UL) +#include <asm/mach-generic/spaces.h> + #endif /* _ASM_MACH_IP27_SPACES_H */ diff --git a/include/asm-mips/mach-ip32/dma-coherence.h b/include/asm-mips/mach-ip32/dma-coherence.h index c3f9a6a20eb..a5511ebb2d5 100644 --- a/include/asm-mips/mach-ip32/dma-coherence.h +++ b/include/asm-mips/mach-ip32/dma-coherence.h @@ -6,8 +6,8 @@ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> * */ -#ifndef __ASM_MACH_IP35_DMA_COHERENCE_H -#define __ASM_MACH_IP35_DMA_COHERENCE_H +#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H +#define __ASM_MACH_IP32_DMA_COHERENCE_H #include <asm/ip32/crime.h> @@ -69,4 +69,4 @@ static inline int plat_device_is_coherent(struct device *dev) return 0; /* IP32 is non-cohernet */ } -#endif /* __ASM_MACH_IP35_DMA_COHERENCE_H */ +#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-ip32/spaces.h b/include/asm-mips/mach-ip32/spaces.h deleted file mode 100644 index 44abe5c0238..00000000000 --- a/include/asm-mips/mach-ip32/spaces.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04, 05 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_MACH_IP32_SPACES_H -#define _ASM_MACH_IP32_SPACES_H - -/* - * Memory above this physical address will be considered highmem. - * Fixme: 59 bits is a fictive number and makes assumptions about processors - * in the distant future. Nobody will care for a few years :-) - */ -#ifndef HIGHMEM_START -#define HIGHMEM_START (1UL << 59UL) -#endif - -#define CAC_BASE 0x9800000000000000UL -#define IO_BASE 0x9000000000000000UL -#define UNCAC_BASE 0x9000000000000000UL -#define MAP_BASE 0xc000000000000000UL - -#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) -#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) -#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) - -/* - * This handles the memory map. - */ -#define PAGE_OFFSET CAC_BASE - -#endif /* __ASM_MACH_IP32_SPACES_H */ diff --git a/include/asm-mips/mach-jmr3927/ioremap.h b/include/asm-mips/mach-jmr3927/ioremap.h new file mode 100644 index 00000000000..aa131ad7f71 --- /dev/null +++ b/include/asm-mips/mach-jmr3927/ioremap.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/mach-jmr3927/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_JMR3927_IOREMAP_H +#define __ASM_MACH_JMR3927_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#define TXX9_DIRECTMAP_BASE 0xff000000ul + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0xf0000) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; +} + +#endif /* __ASM_MACH_JMR3927_IOREMAP_H */ diff --git a/include/asm-mips/mach-lasat/mach-gt64120.h b/include/asm-mips/mach-lasat/mach-gt64120.h deleted file mode 100644 index 1a9ad45cc13..00000000000 --- a/include/asm-mips/mach-lasat/mach-gt64120.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H -#define _ASM_GT64120_LASAT_GT64120_DEP_H - -/* - * GT64120 config space base address on Lasat 100 - */ -#define GT64120_BASE (KSEG1ADDR(0x14000000)) - -/* - * PCI Bus allocation - * - * (Guessing ...) - */ -#define GT_PCI_MEM_BASE 0x12000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL -#define GT_PCI_IO_BASE 0x10000000UL -#define GT_PCI_IO_SIZE 0x02000000UL -#define GT_ISA_IO_BASE PCI_IO_BASE - -#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */ diff --git a/include/asm-mips/mach-lemote/dma-coherence.h b/include/asm-mips/mach-lemote/dma-coherence.h new file mode 100644 index 00000000000..7e914777ebc --- /dev/null +++ b/include/asm-mips/mach-lemote/dma-coherence.h @@ -0,0 +1,42 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + */ +#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H +#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + return virt_to_phys(addr) | 0x80000000; +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return page_to_phys(page) | 0x80000000; +} + +static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & 0x7fffffff; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-lemote/mc146818rtc.h b/include/asm-mips/mach-lemote/mc146818rtc.h new file mode 100644 index 00000000000..ed5147e1108 --- /dev/null +++ b/include/asm-mips/mach-lemote/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H +#define __ASM_MACH_LEMOTE_MC146818RTC_H + +#include <linux/io.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 0 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) +#endif + +#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */ diff --git a/include/asm-mips/mach-mips/kernel-entry-init.h b/include/asm-mips/mach-mips/kernel-entry-init.h new file mode 100644 index 00000000000..0b793e7bf67 --- /dev/null +++ b/include/asm-mips/mach-mips/kernel-entry-init.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Chris Dearman (chris@mips.com) + * Copyright (C) 2007 Mips Technologies, Inc. + */ +#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H + + .macro kernel_entry_setup +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 t0, CP0_CONFIG + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 1 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 2 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 3 + and t0, 1<<2 + bnez t0, 0f +9: + /* Assume we came from YAMON... */ + PTR_LA v0, 0x9fc00534 /* YAMON print */ + lw v0, (v0) + move a0, zero + PTR_LA a1, nonmt_processor + jal v0 + + PTR_LA v0, 0x9fc00520 /* YAMON exit */ + lw v0, (v0) + li a0, 1 + jal v0 + +1: b 1b + + __INITDATA +nonmt_processor: + .asciz "SMTC kernel requires the MT ASE to run\n" + __FINIT +0: +#endif + .endm + +/* + * Do SMP slave processor setup necessary before we can safely execute C code. + */ + .macro smp_slave_setup + .endm + +#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-mipssim/cpu-feature-overrides.h index 779b0220573..779b0220573 100644 --- a/include/asm-mips/mach-sim/cpu-feature-overrides.h +++ b/include/asm-mips/mach-mipssim/cpu-feature-overrides.h diff --git a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h b/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h deleted file mode 100644 index 57a12ded061..00000000000 --- a/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * Copyright (C) 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H - -/* - * Momentum Ocelot-3 is based on Rm7900 processor which - * is based on the E9000 core. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-tx49xx/ioremap.h b/include/asm-mips/mach-tx49xx/ioremap.h new file mode 100644 index 00000000000..1e7beae7222 --- /dev/null +++ b/include/asm-mips/mach-tx49xx/ioremap.h @@ -0,0 +1,43 @@ +/* + * include/asm-mips/mach-tx49xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX49XX_IOREMAP_H +#define __ASM_MACH_TX49XX_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#ifdef CONFIG_64BIT +#define TXX9_DIRECTMAP_BASE 0xfff000000ul +#else +#define TXX9_DIRECTMAP_BASE 0xff000000ul +#endif + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0x400000) + return (void __iomem *)(unsigned long)(int)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= + (unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff); +} + +#endif /* __ASM_MACH_TX49XX_IOREMAP_H */ diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h index 76add42e486..93ba1c1b2a4 100644 --- a/include/asm-mips/mips-boards/atlasint.h +++ b/include/asm-mips/mips-boards/atlasint.h @@ -28,11 +28,6 @@ #include <irq.h> -/* - * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode) - */ -#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE - /* CPU interrupt offsets */ #define MIPSCPU_INT_SW0 0 #define MIPSCPU_INT_SW1 1 @@ -42,7 +37,6 @@ #define MIPSCPU_INT_MB2 4 #define MIPSCPU_INT_MB3 5 #define MIPSCPU_INT_MB4 6 -#define MIPSCPU_INT_CPUCTR 7 /* * Interrupts 8..39 are used for Atlas interrupt controller interrupts diff --git a/include/asm-mips/mips-boards/bonito64.h b/include/asm-mips/mips-boards/bonito64.h index cd712561010..dc3fc32eedd 100644 --- a/include/asm-mips/mips-boards/bonito64.h +++ b/include/asm-mips/mips-boards/bonito64.h @@ -26,7 +26,12 @@ /* offsets from base register */ #define BONITO(x) (x) -#else /* !__ASSEMBLY__ */ +#elif defined(CONFIG_LEMOTE_FULONG) + +#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) +#define BONITO_IRQ_BASE 32 + +#else /* * Algorithmics Bonito64 system controller register base. diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index b98f1658cfd..c8ebcc3e126 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -73,12 +73,28 @@ * CoreEMUL with Bonito System Controller is treated like a Core20K * CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC */ -#define MIPS_REVISION_CORID_CORE_EMUL_BON 0x63 -#define MIPS_REVISION_CORID_CORE_EMUL_MSC 0x65 +#define MIPS_REVISION_CORID_CORE_EMUL_BON -1 +#define MIPS_REVISION_CORID_CORE_EMUL_MSC -2 #define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f) -extern unsigned int mips_revision_corid; +extern int mips_revision_corid; + +#define MIPS_REVISION_SCON_OTHER 0 +#define MIPS_REVISION_SCON_SOCITSC 1 +#define MIPS_REVISION_SCON_SOCITSCP 2 + +/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */ +#define MIPS_REVISION_SCON_UNKNOWN -1 +#define MIPS_REVISION_SCON_GT64120 -2 +#define MIPS_REVISION_SCON_BONITO -3 +#define MIPS_REVISION_SCON_BRTL -4 +#define MIPS_REVISION_SCON_SOCIT -5 +#define MIPS_REVISION_SCON_ROCIT -6 + +#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff) + +extern int mips_revision_sconid; #ifdef CONFIG_PCI extern void mips_pcibios_init(void); diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h index 9180d646611..7461318f1cd 100644 --- a/include/asm-mips/mips-boards/maltaint.h +++ b/include/asm-mips/mips-boards/maltaint.h @@ -32,11 +32,6 @@ */ #define MALTA_INT_BASE 0 -/* - * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode) - */ -#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE - /* CPU interrupt offsets */ #define MIPSCPU_INT_SW0 0 #define MIPSCPU_INT_SW1 1 @@ -49,7 +44,6 @@ #define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 #define MIPSCPU_INT_MB4 6 #define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4 -#define MIPSCPU_INT_CPUCTR 7 /* * Interrupts 64..127 are used for Soc-it Classic interrupts diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h index 8eaefb837b9..e036b7dd6de 100644 --- a/include/asm-mips/mips-boards/msc01_pci.h +++ b/include/asm-mips/mips-boards/msc01_pci.h @@ -208,6 +208,7 @@ * latter, they should be moved elsewhere. */ #define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 +#define MIPS_SOCITSC_PCI_REG_BASE 0x1ff10000 extern unsigned long _pcictrl_msc; diff --git a/include/asm-mips/mips-boards/prom.h b/include/asm-mips/mips-boards/prom.h index daaf9f98fc6..a9db576a976 100644 --- a/include/asm-mips/mips-boards/prom.h +++ b/include/asm-mips/mips-boards/prom.h @@ -33,6 +33,7 @@ extern void prom_meminit(void); extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); extern void mips_display_message(const char *str); extern void mips_display_word(unsigned int num); +extern void mips_scroll_message(void); extern int get_ethernet_addr(char *ethernet_addr); /* Memory descriptor management. */ diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h index 4f6a3933699..e710bae0734 100644 --- a/include/asm-mips/mips-boards/seadint.h +++ b/include/asm-mips/mips-boards/seadint.h @@ -22,14 +22,7 @@ #include <irq.h> -/* - * Interrupts 0..7 are used for SEAD CPU interrupts - */ -#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE - #define MIPSCPU_INT_UART0 2 #define MIPSCPU_INT_UART1 3 -#define MIPSCPU_INT_CPUCTR 7 - #endif /* !(_MIPS_SEADINT_H) */ diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h index 54f2fe621d6..8ef6db76d5c 100644 --- a/include/asm-mips/mips-boards/simint.h +++ b/include/asm-mips/mips-boards/simint.h @@ -21,15 +21,11 @@ #define SIM_INT_BASE 0 #define MIPSCPU_INT_MB0 2 -#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE #define MIPS_CPU_TIMER_IRQ 7 -#define MIPSCPU_INT_CPUCTR 7 - #define MSC01E_INT_BASE 64 -#define MIPSCPU_INT_CPUCTR 7 #define MSC01E_INT_CPUCTR 11 #endif diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index 9985cb7c16e..18f47f1e8cd 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -7,7 +7,7 @@ * Copyright (C) 2000 Silicon Graphics, Inc. * Modified for further R[236]000 support by Paul M. Antoine, 1996. * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2000, 07 MIPS Technologies, Inc. * Copyright (C) 2003, 2004 Maciej W. Rozycki */ #ifndef _ASM_MIPSREGS_H @@ -15,6 +15,7 @@ #include <linux/linkage.h> #include <asm/hazards.h> +#include <asm/war.h> /* * The following macros are especially useful for __asm__ @@ -533,6 +534,12 @@ #define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) #define MIPS_CONF3_LPA (_ULCAST_(1) << 7) #define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) + +#define MIPS_CONF7_WII (_ULCAST_(1) << 31) + +#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) + /* * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. @@ -700,10 +707,10 @@ do { \ */ #define __read_64bit_c0_split(source, sel) \ ({ \ - unsigned long long val; \ - unsigned long flags; \ + unsigned long long __val; \ + unsigned long __flags; \ \ - local_irq_save(flags); \ + local_irq_save(__flags); \ if (sel == 0) \ __asm__ __volatile__( \ ".set\tmips64\n\t" \ @@ -712,7 +719,7 @@ do { \ "dsrl\t%M0, %M0, 32\n\t" \ "dsrl\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ - : "=r" (val)); \ + : "=r" (__val)); \ else \ __asm__ __volatile__( \ ".set\tmips64\n\t" \ @@ -721,17 +728,17 @@ do { \ "dsrl\t%M0, %M0, 32\n\t" \ "dsrl\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ - : "=r" (val)); \ - local_irq_restore(flags); \ + : "=r" (__val)); \ + local_irq_restore(__flags); \ \ - val; \ + __val; \ }) #define __write_64bit_c0_split(source, sel, val) \ do { \ - unsigned long flags; \ + unsigned long __flags; \ \ - local_irq_save(flags); \ + local_irq_save(__flags); \ if (sel == 0) \ __asm__ __volatile__( \ ".set\tmips64\n\t" \ @@ -752,7 +759,7 @@ do { \ "dmtc0\t%L0, " #source ", " #sel "\n\t" \ ".set\tmips0" \ : : "r" (val)); \ - local_irq_restore(flags); \ + local_irq_restore(__flags); \ } while (0) #define read_c0_index() __read_32bit_c0_register($0, 0) @@ -770,6 +777,9 @@ do { \ #define read_c0_context() __read_ulong_c0_register($4, 0) #define write_c0_context(val) __write_ulong_c0_register($4, 0, val) +#define read_c0_userlocal() __read_ulong_c0_register($4, 2) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) + #define read_c0_pagemask() __read_32bit_c0_register($5, 0) #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) @@ -1292,10 +1302,39 @@ static inline void tlb_probe(void) static inline void tlb_read(void) { +#if MIPS34K_MISSED_ITLB_WAR + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); +#endif + __asm__ __volatile__( ".set noreorder\n\t" "tlbr\n\t" ".set reorder"); + +#if MIPS34K_MISSED_ITLB_WAR + if ((res & _ULCAST_(1))) + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +#endif } static inline void tlb_write_indexed(void) diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h index 399d03f1c4f..de6d09ebbd8 100644 --- a/include/asm-mips/module.h +++ b/include/asm-mips/module.h @@ -112,6 +112,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "RM9000 " #elif defined CONFIG_CPU_SB1 #define MODULE_PROC_FAMILY "SB1 " +#elif defined CONFIG_CPU_LOONGSON2 +#define MODULE_PROC_FAMILY "LOONGSON2 " #else #error MODULE_PROC_FAMILY undefined for your processor configuration #endif @@ -122,6 +124,13 @@ search_module_dbetables(unsigned long addr) #define MODULE_KERNEL_TYPE "64BIT " #endif -#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_KERNEL_TYPE +#ifdef CONFIG_MIPS_MT_SMTC +#define MODULE_KERNEL_SMTC "MT_SMTC " +#else +#define MODULE_KERNEL_SMTC "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC #endif /* _ASM_MODULE_H */ diff --git a/include/asm-mips/nile4.h b/include/asm-mips/nile4.h deleted file mode 100644 index c3ca959aa4d..00000000000 --- a/include/asm-mips/nile4.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - * - * This file is based on the following documentation: - * - * NEC Vrc 5074 System Controller Data Sheet, June 1998 - */ - -#ifndef _ASM_NILE4_H -#define _ASM_NILE4_H - -#define NILE4_BASE 0xbfa00000 -#define NILE4_SIZE 0x00200000 /* 2 MB */ - - - /* - * Physical Device Address Registers (PDARs) - */ - -#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ -#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */ -#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */ -#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */ -#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */ -#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */ -#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */ -#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */ -#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */ -#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */ -#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */ -#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */ - /* [R/W] */ -#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */ - - - /* - * CPU Interface Registers - */ - -#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ -#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */ -#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */ -#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */ - /* Enable [R/W] */ -#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */ -#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */ - - - /* - * Memory-Interface Registers - */ - -#define NILE4_MEMCTRL 0x00C0 /* Memory Control */ -#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */ -#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */ - - - /* - * PCI-Bus Registers - */ - -#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ -#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */ -#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */ -#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */ -#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */ - - - /* - * Local-Bus Registers - */ - -#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ -#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */ -#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */ -#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */ -#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */ -#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */ -#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */ -#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */ -#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */ - /* Enables [R/W] */ -#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */ -#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */ - - - /* - * DMA Registers - */ - -#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ -#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */ -#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */ -#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */ -#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */ -#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */ - - - /* - * Timer Registers - */ - -#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ -#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */ -#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */ -#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */ -#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */ -#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */ -#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */ -#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */ - - - /* - * PCI Configuration Space Registers - */ - -#define NILE4_PCI_BASE 0x0200 - -#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */ -#define NILE4_DID 0x0202 /* PCI Device ID [R] */ -#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */ -#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */ -#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */ -#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */ -#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */ -#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */ -#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */ -#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */ -#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */ -#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */ -#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */ -#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */ - /* (unimplemented) */ -#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */ -#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */ -#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */ - /* (unimplemented) */ -#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */ -#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */ -#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */ -#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */ -#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */ -#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */ -#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */ -#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */ -#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */ -#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */ -#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */ -#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */ - - - /* - * Serial-Port Registers - */ - -#define NILE4_UART_BASE 0x0300 - -#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ -#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ -#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */ -#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */ -#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */ -#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */ -#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */ -#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */ -#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */ -#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */ -#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */ -#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */ - -#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */ - - - /* - * Interrupt Lines - */ - -#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ -#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */ -#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */ -#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */ -#define NILE4_INT_UART 4 /* UART Interrupt */ -#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ -#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ -#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ -#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ -#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ -#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ -#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */ -#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */ -#define NILE4_INT_RESV 13 /* Reserved */ -#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */ -#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */ - - - /* - * Nile 4 Register Access - */ - -static inline void nile4_sync(void) -{ - volatile u32 *p = (volatile u32 *)0xbfc00000; - (void)(*p); -} - -static inline void nile4_out32(u32 offset, u32 val) -{ - *(volatile u32 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u32 nile4_in32(u32 offset) -{ - u32 val = *(volatile u32 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out16(u32 offset, u16 val) -{ - *(volatile u16 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u16 nile4_in16(u32 offset) -{ - u16 val = *(volatile u16 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out8(u32 offset, u8 val) -{ - *(volatile u8 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u8 nile4_in8(u32 offset) -{ - u8 val = *(volatile u8 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - - - /* - * Physical Device Address Registers - */ - -extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, - int on_memory_bus, int visible); - - - /* - * PCI Master Registers - */ - -#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ -#define NILE4_PCICMD_IO 1 /* PCI I/O Space */ -#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */ -#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */ - - - /* - * PCI Address Spaces - * - * Note that these are multiplexed using PCIINIT[01]! - */ - -#define NILE4_PCI_IO_BASE 0xa6000000 -#define NILE4_PCI_MEM_BASE 0xa8000000 -#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE -#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE - - -extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); - - - /* - * Interrupt Programming - */ - -#define NUM_I8259_INTERRUPTS 16 -#define NUM_NILE4_INTERRUPTS 16 - -#define IRQ_I8259_CASCADE NILE4_INT_INTE -#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS) -#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS) -#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS) - -extern void nile4_map_irq(int nile4_irq, int cpu_irq); -extern void nile4_map_irq_all(int cpu_irq); -extern void nile4_enable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq_all(void); -extern u16 nile4_get_irq_stat(int cpu_irq); -extern void nile4_enable_irq_output(int cpu_irq); -extern void nile4_disable_irq_output(int cpu_irq); -extern void nile4_set_pci_irq_polarity(int pci_irq, int high); -extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); -extern void nile4_clear_irq(int nile4_irq); -extern void nile4_clear_irq_mask(u32 mask); -extern u8 nile4_i8259_iack(void); -extern void nile4_dump_irq_status(void); /* Debug */ - -#endif - diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 5c3239dad0f..b92dd8c760d 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -34,12 +34,8 @@ #ifndef __ASSEMBLY__ -/* - * This gives the physical RAM offset. - */ -#ifndef PHYS_OFFSET -#define PHYS_OFFSET 0UL -#endif +#include <linux/pfn.h> +#include <asm/io.h> /* * It's normally defined only for FLATMEM config but it's @@ -48,9 +44,6 @@ */ #define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET) -#include <linux/pfn.h> -#include <asm/io.h> - extern void clear_page(void * page); extern void copy_page(void * to, void * from); @@ -150,11 +143,15 @@ typedef struct { unsigned long pgprot; } pgprot_t; * __pa()/__va() should be used only during mem init. */ #if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) -#define __pa_page_offset(x) ((unsigned long)(x) < CKSEG0 ? PAGE_OFFSET : CKSEG0) +#define __pa(x) \ +({ \ + unsigned long __x = (unsigned long)(x); \ + __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \ +}) #else -#define __pa_page_offset(x) PAGE_OFFSET +#define __pa(x) \ + ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) #endif -#define __pa(x) ((unsigned long)(x) - __pa_page_offset(x) + PHYS_OFFSET) #define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) #define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x),0)) diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index 3eea3ba0fca..4fcc185cb2d 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -56,7 +56,7 @@ extern void register_pci_controller(struct pci_controller *hose); /* * board supplied pci irq fixup routine */ -extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); /* Can be used to override the logic in pci_scan_bus for skipping @@ -121,20 +121,6 @@ extern unsigned int PCI_DMA_BUS_IS_PHYS; #endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */ -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (1) - -extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction); -extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr); -extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr); -extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction); -extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction); - #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, @@ -181,10 +167,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> -static inline void pcibios_add_platform_entries(struct pci_dev *dev) -{ -} - /* Do platform specific device initialization at pci_enable_device() time */ extern int pcibios_plat_dev_init(struct pci_dev *dev); diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h new file mode 100644 index 00000000000..c84bcf9570b --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h @@ -0,0 +1,151 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_CIC_INT_H +#define _MSP_CIC_INT_H + +/* + * The PMC-Sierra CIC interrupts are all centrally managed by the + * CIC sub-system. + * We attempt to keep the interrupt numbers as consistent as possible + * across all of the MSP devices, but some differences will creep in ... + * The interrupts which are directly forwarded to the MIPS core interrupts + * are assigned interrupts in the range 0-7, interrupts cascaded through + * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 + * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 + * and VPE0 (or thread contexts for that matter). Will have to fix. + * The PER interrupts are assigned interrupts in the range 40-71. +*/ + + +/* + * IRQs directly forwarded to the CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ +#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ +#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ +#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definitions for the CIC + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) + /* External interrupt 3 */ +#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) + /* CPU interface interrupt */ +#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) + /* External interrupt 4 */ +#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) + /* Cascaded IRQ for USB */ +#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) + /* Sec engine mailbox IRQ */ +#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) + /* External interrupt 5 */ +#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) + /* Cascaded IRQ for sec engine */ +#define MSP_INT_PER (MSP_CIC_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) + /* VPE0 MIPS timer */ +#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) + /* External interrupt 5 */ +#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) + /* Cascaded ADSL2+ SAR IRQ */ +#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) + /* ADSL2+ IRQ */ +#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) + /* VPE1 MIPS timer */ +#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) + /* VPE0 Performance counter */ +#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) + /* VPE1 Performance counter */ +#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) + /* External interrupt 5 */ +#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) + /* VPE0 Software interrupt */ +#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) + /* VPE0 Software interrupt */ + +/* + * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_CIC_INT_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_int.h new file mode 100644 index 00000000000..1d9f0547482 --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_int.h @@ -0,0 +1,43 @@ +/* + * Defines for the MSP interrupt handlers. + * + * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_INT_H +#define _MSP_INT_H + +/* + * The PMC-Sierra MSP product line has at least two different interrupt + * controllers, the SLP register based scheme and the CIC interrupt + * controller block mechanism. This file distinguishes between them + * so that devices see a uniform interface. + */ + +#if defined(CONFIG_IRQ_MSP_SLP) + #include "msp_slp_int.h" +#elif defined(CONFIG_IRQ_MSP_CIC) + #include "msp_cic_int.h" +#else + #error "What sort of interrupt controller does *your* MSP have?" +#endif + +#endif /* !_MSP_INT_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h new file mode 100644 index 00000000000..41560690361 --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2000-2006 PMC-Sierra INC. + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + * + * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND + * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS + * SOFTWARE. + */ + +#ifndef _MSP_PCI_H_ +#define _MSP_PCI_H_ + +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) + +/* + * It is convenient to program the OATRAN register so that + * Athena virtual address space and PCI address space are + * the same. This is not a requirement, just a convenience. + * + * The only hard restrictions on the value of OATRAN is that + * OATRAN must not be programmed to allow translated memory + * addresses to fall within the lowest 512MB of + * PCI address space. This region is hardcoded + * for use as Athena PCI Host Controller target + * access memory space to the Athena's SDRAM. + * + * Note that OATRAN applies only to memory accesses, not + * to I/O accesses. + * + * To program OATRAN to make Athena virtual address space + * and PCI address space have the same values, OATRAN + * is to be programmed to 0xB8000000. The top seven + * bits of the value mimic the seven bits clipped off + * by the PCI Host controller. + * + * With OATRAN at the said value, when the CPU does + * an access to its virtual address at, say 0xB900_5000, + * the address appearing on the PCI bus will be + * 0xB900_5000. + * - Michael Penner + */ +#define MSP_PCI_OATRAN 0xB8000000UL + +#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) +#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) +#define MSP_PCI_SPACE_END \ + (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) +#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) +#define MSP_PCI_IOSPACE_SIZE 0x1000 +#define MSP_PCI_IOSPACE_END \ + (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) + +/* IRQ for PCI status interrupts */ +#define PCI_STAT_IRQ 20 + +#define QFLUSH_REG_1 0xB7F40000 + +typedef volatile unsigned int pcireg; +typedef void * volatile ppcireg; + +struct pci_block_copy +{ + pcireg unused1; /* +0x00 */ + pcireg unused2; /* +0x04 */ + ppcireg unused3; /* +0x08 */ + ppcireg unused4; /* +0x0C */ + pcireg unused5; /* +0x10 */ + pcireg unused6; /* +0x14 */ + pcireg unused7; /* +0x18 */ + ppcireg unused8; /* +0x1C */ + ppcireg unused9; /* +0x20 */ + pcireg unusedA; /* +0x24 */ + ppcireg unusedB; /* +0x28 */ + ppcireg unusedC; /* +0x2C */ +}; + +enum +{ + config_device_vendor, /* 0 */ + config_status_command, /* 1 */ + config_class_revision, /* 2 */ + config_BIST_header_latency_cache, /* 3 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ + config_capabilities, /* 13 */ + config_not_used14, /* 14 */ + config_lat_grant_irq, /* 15 */ + config_message_control,/* 16 */ + config_message_addr, /* 17 */ + config_message_data, /* 18 */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ +}; + +struct msp_pci_regs +{ + pcireg hop_unused_00; /* +0x00 */ + pcireg hop_unused_04; /* +0x04 */ + pcireg hop_unused_08; /* +0x08 */ + pcireg hop_unused_0C; /* +0x0C */ + pcireg hop_unused_10; /* +0x10 */ + pcireg hop_unused_14; /* +0x14 */ + pcireg hop_unused_18; /* +0x18 */ + pcireg hop_unused_1C; /* +0x1C */ + pcireg hop_unused_20; /* +0x20 */ + pcireg hop_unused_24; /* +0x24 */ + pcireg hop_unused_28; /* +0x28 */ + pcireg hop_unused_2C; /* +0x2C */ + pcireg hop_unused_30; /* +0x30 */ + pcireg hop_unused_34; /* +0x34 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ + pcireg hop_unused_48; /* +0x48 */ + pcireg msg_signaled_int_status; /* +0x4C */ + pcireg msg_signaled_int_mask; /* +0x50 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ + pcireg hop_unused_5C; /* +0x5C */ + pcireg hop_unused_60; /* +0x60 */ + pcireg hop_unused_64; /* +0x64 */ + pcireg hop_unused_68; /* +0x68 */ + pcireg hop_unused_6C; /* +0x6C */ + pcireg hop_unused_70; /* +0x70 */ + + struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); + + pcireg error_hdr1; /* +0xE0 */ + pcireg error_hdr2; /* +0xE4 */ + + pcireg config[config_maxregs] __attribute__((aligned(256))); + +}; + +#define BPCI_CFGADDR_BUSNUM_SHF 16 +#define BPCI_CFGADDR_FUNCTNUM_SHF 8 +#define BPCI_CFGADDR_REGNUM_SHF 2 +#define BPCI_CFGADDR_ENABLE (1<<31) + +#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ +#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ +#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ +#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ +#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ +#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ +#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ + +#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ +#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ +#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ +#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ +#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ +#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ +#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ +#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ +#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ +#define BPCI_IFSTATUS_SER (1<<19) /* System error */ +#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ +#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ +#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ +#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ +#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ +#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ +#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ +#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ +#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ + +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ +#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ +#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ + +extern struct msp_pci_regs msp_pci_regs + __attribute__((section(".register"))); +extern unsigned long msp_pci_config_space + __attribute__((section(".register"))); + +#endif /* !_MSP_PCI_H_ */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h b/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h new file mode 100644 index 00000000000..14ca7dc382a --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h @@ -0,0 +1,176 @@ +/* + * MIPS boards bootprom interface for the Linux kernel. + * + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _ASM_MSP_PROM_H +#define _ASM_MSP_PROM_H + +#include <linux/types.h> + +#define DEVICEID "deviceid" +#define FEATURES "features" +#define PROM_ENV "prom_env" +#define PROM_ENV_FILE "/proc/"PROM_ENV +#define PROM_ENV_SIZE 256 + +#define CPU_DEVID_FAMILY 0x0000ff00 +#define CPU_DEVID_REVISION 0x000000ff + +#define FPGA_IS_POLO(revision) \ + (((revision >= 0xb0) && (revision < 0xd0))) +#define FPGA_IS_5000(revision) \ + ((revision >= 0x80) && (revision <= 0x90)) +#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) +#define FPGA_IS_DUET(revision) \ + (((revision >= 0xa0) && (revision < 0xb0))) +#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) +#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) + +#define MACHINE_TYPE_POLO "POLO" +#define MACHINE_TYPE_DUET "DUET" +#define MACHINE_TYPE_ZEUS "ZEUS" +#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" +#define MACHINE_TYPE_MSP5000 "MSP5000" +#define MACHINE_TYPE_MSP4200 "MSP4200" +#define MACHINE_TYPE_MSP7120 "MSP7120" +#define MACHINE_TYPE_MSP7130 "MSP7130" +#define MACHINE_TYPE_OTHER "OTHER" + +#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" +#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" +#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" +#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" +#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" +#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" +#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" +#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" + +/* Device Family definitions */ +#define FAMILY_FPGA 0x0000 +#define FAMILY_ZEUS 0x1000 +#define FAMILY_POLO 0x2000 +#define FAMILY_DUET 0x4000 +#define FAMILY_TRIAD 0x5000 +#define FAMILY_MSP4200 0x4200 +#define FAMILY_MSP4200_FPGA 0x4f00 +#define FAMILY_MSP7100 0x7100 +#define FAMILY_MSP7100_FPGA 0x7f00 + +/* Device Type definitions */ +#define TYPE_MSP7120 0x7120 +#define TYPE_MSP7130 0x7130 + +#define ENET_KEY 'E' +#define ENETTXD_KEY 'e' +#define PCI_KEY 'P' +#define PCIMUX_KEY 'p' +#define SEC_KEY 'S' +#define SPAD_KEY 'D' +#define TDM_KEY 'T' +#define ZSP_KEY 'Z' + +#define FEATURE_NOEXIST '-' +#define FEATURE_EXIST '+' + +#define ENET_MII 'M' +#define ENET_RMII 'R' + +#define ENETTXD_FALLING 'F' +#define ENETTXD_RISING 'R' + +#define PCI_HOST 'H' +#define PCI_PERIPHERAL 'P' + +#define PCIMUX_FULL 'F' +#define PCIMUX_SINGLE 'S' + +#define SEC_DUET 'D' +#define SEC_POLO 'P' +#define SEC_SLOW 'S' +#define SEC_TRIAD 'T' + +#define SPAD_POLO 'P' + +#define TDM_DUET 'D' /* DUET TDMs might exist */ +#define TDM_POLO 'P' /* POLO TDMs might exist */ +#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ + +#define ZSP_DUET 'D' /* one DUET zsp engine */ +#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ + +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *name); +extern void prom_init_cmdline(void); +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, + unsigned long end_mem); + +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT +extern bool get_ramroot(void **start, unsigned long *size); +#endif + +extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); +extern unsigned long get_deviceid(void); +extern char identify_enet(unsigned long interface_num); +extern char identify_enetTxD(unsigned long interface_num); +extern char identify_pci(void); +extern char identify_sec(void); +extern char identify_spad(void); +extern char identify_sec(void); +extern char identify_tdm(void); +extern char identify_zsp(void); +extern unsigned long identify_family(void); +extern unsigned long identify_revision(void); + +/* + * The following macro calls prom_printf and puts the format string + * into an init section so it can be reclaimed. + */ +#define ppfinit(f, x...) \ + do { \ + static char _f[] __initdata = KERN_INFO f; \ + printk(_f, ## x); \ + } while (0) + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ + +enum yamon_memtypes { + yamon_dontuse, + yamon_prom, + yamon_free, +}; + +struct prom_pmemblock { + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ +}; + +extern int prom_argc; +extern char **prom_argv; +extern char **prom_envp; +extern int *prom_vec; +extern struct prom_pmemblock *prom_getmdesc(void); + +#endif /* !_ASM_MSP_PROM_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h new file mode 100644 index 00000000000..60a5a38dd5b --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h @@ -0,0 +1,236 @@ +/* + * SMP/VPE-safe functions to access "registers" (see note). + * + * NOTES: +* - These macros use ll/sc instructions, so it is your responsibility to + * ensure these are available on your platform before including this file. + * - The MIPS32 spec states that ll/sc results are undefined for uncached + * accesses. This means they can't be used on HW registers accessed + * through kseg1. Code which requires these macros for this purpose must + * front-end the registers with cached memory "registers" and have a single + * thread update the actual HW registers. + * - A maximum of 2k of code can be inserted between ll and sc. Every + * memory accesses between the instructions will increase the chance of + * sc failing and having to loop. + * - When using custom_read_reg32/custom_write_reg32 only perform the + * necessary logical operations on the register value in between these + * two calls. All other logic should be performed before the first call. + * - There is a bug on the R10000 chips which has a workaround. If you + * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' + * to be non-zero. If you are using this header from within linux, you may + * include <asm/war.h> before including this file to have this defined + * appropriately for you. + * + * Copyright 2005-2007 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO + * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., 675 + * Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_REGOPS_H__ +#define __ASM_REGOPS_H__ + +#include <linux/types.h> + +#include <asm/war.h> + +#ifndef R10000_LLSC_WAR +#define R10000_LLSC_WAR 0 +#endif + +#if R10000_LLSC_WAR == 1 +#define __beqz "beqzl " +#else +#define __beqz "beqz " +#endif + +#ifndef _LINUX_TYPES_H +typedef unsigned int u32; +#endif + +/* + * Sets all the masked bits to the corresponding value bits + */ +static inline void set_value_reg32(volatile u32 *const addr, + u32 const mask, + u32 const value) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_value_reg32 \n" + " and %0, %2 \n" + " or %0, %3 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "ir" (value), "m" (*addr)); +} + +/* + * Sets all the masked bits to '1' + */ +static inline void set_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_reg32 \n" + " or %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Sets all the masked bits to '0' + */ +static inline void clear_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # clear_reg32 \n" + " and %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "m" (*addr)); +} + +/* + * Toggles all masked bits from '0' to '1' and '1' to '0' + */ +static inline void toggle_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # toggle_reg32 \n" + " xor %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Read all masked bits others are returned as '0' + */ +static inline u32 read_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " and %0, %2 # mask \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr), "ir" (mask)); + + return temp; +} + +/* + * blocking_read_reg32 - Read address with blocking load + * + * Uncached writes need to be read back to ensure they reach RAM. + * The returned value must be 'used' to prevent from becoming a + * non-blocking load. + */ +static inline u32 blocking_read_reg32(volatile u32 *const addr) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " move %0, %0 # block \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr)); + + return temp; +} + +/* + * For special strange cases only: + * + * If you need custom processing within a ll/sc loop, use the following macros + * VERY CAREFULLY: + * + * u32 tmp; <-- Define a variable to hold the data + * + * custom_read_reg32(address, tmp); <-- Reads the address and put the value + * in the 'tmp' variable given + * + * From here on out, you are (basicly) atomic, so don't do anything too + * fancy! + * Also, this code may loop if the end of this block fails to write + * everything back safely due do the other CPU, so do NOT do anything + * with side-effects! + * + * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. + */ +#define custom_read_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + "1: ll %0, %1 #custom_read_reg32 \n" \ + " .set pop \n" \ + : "=r" (tmp), "=m" (*address) \ + : "m" (*address)) + +#define custom_write_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + " sc %0, %1 #custom_write_reg32 \n" \ + " "__beqz"%0, 1b \n" \ + " nop \n" \ + " .set pop \n" \ + : "=&r" (tmp), "=m" (*address) \ + : "0" (tmp), "m" (*address)) + +#endif /* __ASM_REGOPS_H__ */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h new file mode 100644 index 00000000000..0b56f55206c --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h @@ -0,0 +1,667 @@ +/* + * Defines for the address space, registers and register configuration + * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. + * This file contains addess maps for all the devices in the line of + * products but only has register definitions and configuration masks for + * registers which aren't definitely associated with any device. Things + * like clock settings, reset access, the ELB etc. Individual device + * drivers will reference the appropriate XXX_BASE value defined here + * and have individual registers offset from that. + * + * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#include <asm/addrspace.h> +#include <linux/types.h> + +#ifndef _ASM_MSP_REGS_H +#define _ASM_MSP_REGS_H + +/* + ######################################################################## + # Address space and device base definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * System Logic and Peripherals (ELB, UART0, etc) device address space * + *************************************************************************** + */ +#define MSP_SLP_BASE 0x1c000000 + /* System Logic and Peripherals */ +#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) + /* System reset register base */ +#define MSP_RST_SIZE 0x0C /* System reset register space */ + +#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) + /* watchdog timer base */ +#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) + /* internal timer base */ +#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) + /* UART0 controller base */ +#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) + /* Block Copy controller base */ +#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) + /* Block Copy descriptor base */ + +/* + *************************************************************************** + * PCI address space * + *************************************************************************** + */ +#define MSP_PCI_BASE 0x19000000 + +/* + *************************************************************************** + * MSbus device address space * + *************************************************************************** + */ +#define MSP_MSB_BASE 0x18000000 + /* MSbus address start */ +#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) + /* Peripheral device registers */ +#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) + /* MAC A device registers */ +#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) + /* MAC B device registers */ +#define MSP_MAC_SIZE 0xE0 /* MAC register space */ + +#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) + /* Security Engine registers */ +#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) + /* MAC C device registers */ +#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) + /* ADSL2 device registers */ +#define MSP_USB_BASE (MSP_MSB_BASE + 0xB40000) + /* USB device registers */ +#define MSP_USB_BASE_START (MSP_MSB_BASE + 0xB40100) + /* USB device registers */ +#define MSP_USB_BASE_END (MSP_MSB_BASE + 0xB401FF) + /* USB device registers */ +#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) + /* CPU interface registers */ + +/* Devices within the MSbus peripheral block */ +#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) + /* UART1 controller base */ +#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) + /* SPI/MPI control registers */ +#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) + /* Two-wire control registers */ +#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) + /* Programmable timer control */ + +/* + *************************************************************************** + * Physical Memory configuration address space * + *************************************************************************** + */ +#define MSP_MEM_CFG_BASE 0x17f00000 + +#define MSP_MEM_INDIRECT_CTL_10 0x10 + +/* + * Notes: + * 1) The SPI registers are split into two blocks, one offset from the + * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by + * 0x68. The SPI driver definitions for the register must be aware + * of this. + * 2) The block copy engine register are divided into two regions, one + * for the control/configuration of the engine proper and one for the + * values of the descriptors used in the copy process. These have + * different base defines (CTRL_BASE vs DESC_BASE) + * 3) These constants are for physical addresses which means that they + * work correctly with "ioremap" and friends. This means that device + * drivers will need to remap these addresses using ioremap and perhaps + * the readw/writew macros. Or they could use the regptr() macro + * defined below, but the readw/writew calls are the correct thing. + * 4) The UARTs have an additional status register offset from the base + * address. This register isn't used in the standard 8250 driver but + * may be used in other software. Consult the hardware datasheet for + * offset details. + * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers + * start at an offset of 0x84 from the base address but the block of + * registers before this is reserved for the security engine. The + * driver will have to be aware of this but it makes the register + * definitions line up better with the documentation. + */ + +/* + ######################################################################## + # System register definitions. Not associated with a specific device # + ######################################################################## + */ + +/* + * This macro maps the physical register number into uncached space + * and (for C code) casts it into a u32 pointer so it can be dereferenced + * Normally these would be accessed with ioremap and readX/writeX, but + * these are convenient for a lot of internal kernel code. + */ +#ifdef __ASSEMBLER__ + #define regptr(addr) (KSEG1ADDR(addr)) +#else + #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) +#endif + +/* + *************************************************************************** + * System Logic and Peripherals (RESET, ELB, etc) registers * + *************************************************************************** + */ + +/* System Control register definitions */ +#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) + /* Device-ID RO */ +#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) + /* Firmware-ID Register RW */ +#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) + /* System-ID Register-0 RW */ +#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) + /* System-ID Register-1 RW */ + +/* System Reset register definitions */ +#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) + /* System Reset Status RO */ +#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) + /* System Set Reset WO */ +#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) + /* System Clear Reset WO */ + +/* System Clock Registers */ +#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) + /* PCI clock generator RW */ +#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) + /* UART clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x24) */ +/* reserved (MSP_SLP_BASE + 0x28) */ +#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) + /* PLL1 clock generator RW */ +#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) + /* PLL0 clock generator RW */ +#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) + /* MIPS clock generator RW */ +#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) + /* Voice Eng clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x3C) */ +#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) + /* MS-Bus clock generator RW */ +#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) + /* Sec & MAC clock generator RW */ +#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) + /* Per & TDM clock generator RW */ + +/* Interrupt Controller Registers */ +#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) + /* Interrupt status register RW */ +#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) + /* Interrupt enable/mask RW */ +#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) + /* Security Engine mailbox RW */ +#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) + /* Voice Engine mailbox RW */ + +/* ELB Controller Registers */ +#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) + /* ELB CS0 Configuration Reg */ +#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) + /* ELB CS0 Base Address Reg */ +#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) + /* ELB CS0 Mask Register */ +#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) + /* ELB CS0 access register */ + +#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) + /* ELB CS1 Configuration Reg */ +#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) + /* ELB CS1 Base Address Reg */ +#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) + /* ELB CS1 Mask Register */ +#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) + /* ELB CS1 access register */ + +#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) + /* ELB CS2 Configuration Reg */ +#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) + /* ELB CS2 Base Address Reg */ +#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) + /* ELB CS2 Mask Register */ +#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) + /* ELB CS2 access register */ + +#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) + /* ELB CS3 Configuration Reg */ +#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) + /* ELB CS3 Base Address Reg */ +#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) + /* ELB CS3 Mask Register */ +#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) + /* ELB CS3 access register */ + +#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) + /* ELB CS4 Configuration Reg */ +#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) + /* ELB CS4 Base Address Reg */ +#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) + /* ELB CS4 Mask Register */ +#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) + /* ELB CS4 access register */ + +#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) + /* ELB CS5 Configuration Reg */ +#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) + /* ELB CS5 Base Address Reg */ +#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) + /* ELB CS5 Mask Register */ +#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) + /* ELB CS5 access register */ + +/* reserved 0xE0 - 0xE8 */ +#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) + /* ELB single PC card detect */ + +/* reserved 0xF0 - 0xF8 */ +#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) + /* SDRAM read/ELB timing Reg */ + +/* Extended UART status registers */ +#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) + /* UART Status Register 0 */ +#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) + /* UART Status Register 1 */ + +/* Performance monitoring registers */ +#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) + /* Performance monitor control */ +#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) + /* Performance monitor clear */ +#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) + /* Perf monitor counter high */ +#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) + /* Perf monitor counter low */ + +/* System control registers */ +#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) + /* System control register */ +#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) + /* System Error status 1 */ +#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) + /* System Error status 2 */ +#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) + /* System Interrupt config */ + +/* Voice Engine Memory configuration */ +#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) + /* Voice engine memory config */ + +/* CPU/SLP Error Status registers */ +#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) + /* CPU/SLP Error status 1 */ +#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) + /* CPU/SLP Error status 1 */ + +#define EXTENDED_GPIO_REG regptr(MSP_SLP_BASE + 0x188) + /* Extended GPIO register */ + +/* System Error registers */ +#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) + /* Int status for SLP errors */ +#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) + /* Int mask for SLP errors */ +#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) + /* External ELB reset */ +#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) + /* Boot Status */ + +/* Extended ELB addressing */ +#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) + /* CS0 Extended address */ +#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) + /* CS1 Extended address */ +#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) + /* CS2 Extended address */ +#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) + /* CS3 Extended address */ +/* reserved 0x1B0 */ +#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) + /* CS5 Extended address */ + +/* PLL Adjustment registers */ +#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) + /* PLL0 lock status */ +#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) + /* PLL Analog reset status */ +#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) + /* PLL0 Adjustment value */ +#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) + /* PLL1 Adjustment value */ + +/* + *************************************************************************** + * Peripheral Register definitions * + *************************************************************************** + */ + +/* Peripheral status */ +#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) + /* Peripheral control register */ +#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) + /* Peripheral status register */ + +/* SPI/MPI Registers */ +#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) + /* SPI/MPI Tx Size register */ +#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) + /* SPI/MPI Rx Size register */ +#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) + /* SPI/MPI Control register */ +#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) + /* SPI/MPI Chip Select reg */ +#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) + /* SPI/MPI Core Data reg */ +#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) + /* SPI/MPI Core Control reg */ +#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) + /* SPI/MPI Core Status reg */ +#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) + /* SPI/MPI Core Ssel reg */ +#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) + /* SPI/MPI Data FIFO reg */ + +/* Peripheral Block Error Registers */ +#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) + /* Error Bit Status Register */ +#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) + /* Error Bit Mask Register */ +#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) + /* Error Header 1 Register */ +#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) + /* Error Header 2 Register */ + +/* Peripheral Block Interrupt Registers */ +#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) + /* Interrupt status register */ +#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) + /* Interrupt Mask Register */ +#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) + /* GPIO interrupt status reg */ +#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) + /* GPIO interrupt MASK Reg */ + +/* POLO GPIO registers */ +#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) + /* Polo GPIO[8:0] data reg */ +#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) + /* Polo GPIO[7:0] config reg */ +#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) + /* Polo GPIO[15:8] config reg */ +#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) + /* Polo GPIO[31:0] output drive */ +#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) + /* Polo GPIO[23:16] config reg */ +#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) + /* Polo GPIO[15:9] data reg */ +#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) + /* Polo GPIO[23:16] data reg */ +#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) + /* Polo GPIO[31:24] data reg */ +#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) + /* Polo GPIO[39:32] data reg */ +#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) + /* Polo GPIO[47:40] data reg */ +#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) + /* Polo GPIO[54:48] data reg */ +#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* Polo GPIO[31:24] config reg */ +#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) + /* Polo GPIO[39:32] config reg */ +#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) + /* Polo GPIO[47:40] config reg */ +#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) + /* Polo GPIO[54:48] config reg */ +#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) + /* Polo GPIO[54:32] output drive */ + +/* Generic GPIO registers */ +#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) + /* GPIO[1:0] data register */ +#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) + /* GPIO[5:2] data register */ +#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) + /* GPIO[9:6] data register */ +#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) + /* GPIO[15:10] data register */ +#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) + /* GPIO[1:0] config register */ +#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) + /* GPIO[5:2] config register */ +#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) + /* GPIO[9:6] config register */ +#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* GPIO[15:10] config register */ +#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) + /* GPIO[15:0] output drive */ + +/* + *************************************************************************** + * CPU Interface register definitions * + *************************************************************************** + */ +#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) + /* PCI-SDRAM queue flush trigger */ +#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) + /* OCP Error Attribute 1 */ +#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) + /* OCP Error Attribute 2 */ +#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) + /* OCP Error Status */ +#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) + /* CPU policy configuration */ +#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) + /* Misc configuration options */ + +/* Central Interrupt Controller Registers */ +#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) + /* Central Interrupt registers */ +#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) + /* External interrupt config */ +#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) + /* CIC Interrupt Status */ +#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) + /* VPE0 Interrupt Mask */ +#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) + /* VPE1 Interrupt Mask */ +#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) + /* Thread Context 0 Int Mask */ +#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) + /* Thread Context 1 Int Mask */ +#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 2 Int Mask */ +#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 3 Int Mask */ +#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 4 Int Mask */ +#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) + + +/* + *************************************************************************** + * Memory controller registers * + *************************************************************************** + */ +#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) +#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) + +/* + *************************************************************************** + * PCI controller registers * + *************************************************************************** + */ +#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) +#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) +#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) + +/* + ######################################################################## + # Register content & macro definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * DEV_ID defines * + *************************************************************************** + */ +#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ +#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ +#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ +#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ +#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ + +#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ +#define MSP5000_ID (0x50 << 8) +#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ +#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ +#define MSP4200_ID (0x42 << 8) +#define MSP4000_ID (0x40 << 8) +#define MSP2XXX_ID (0x20 << 8) +#define MSPZEUS_ID (0x10 << 8) + +#define MSP2004_SUB_ID (0x0 << 16) +#define MSP2005_SUB_ID (0x1 << 16) +#define MSP2006_SUB_ID (0x1 << 16) +#define MSP2007_SUB_ID (0x2 << 16) +#define MSP2010_SUB_ID (0x3 << 16) +#define MSP2015_SUB_ID (0x4 << 16) +#define MSP2020_SUB_ID (0x5 << 16) +#define MSP2100_SUB_ID (0x6 << 16) + +/* + *************************************************************************** + * RESET defines * + *************************************************************************** + */ +#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ +#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ +#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ +#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ +/* reserved */ +#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ +#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ +#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ +#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ +#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ +#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ +#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ +#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ +#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ + +/* + *************************************************************************** + * UART defines * + *************************************************************************** + */ +#ifndef CONFIG_MSP_FPGA +#define MSP_BASE_BAUD 25000000 +#else +#define MSP_BASE_BAUD 6000000 +#endif +#define MSP_UART_REG_LEN 0x20 + +/* + *************************************************************************** + * ELB defines * + *************************************************************************** + */ +#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ +#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ + +/* + *************************************************************************** + * CIC defines * + *************************************************************************** + */ + +/* CIC_EXT_CFG_REG */ +#define EXT_INT_POL(eirq) (1 << (eirq + 8)) +#define EXT_INT_EDGE(eirq) (1 << eirq) + +#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI +#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO + +#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ + ((reg & EXT_INT_EDGE(eirq)) == 0) +#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) +#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) +#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ + ((reg & EXT_INT_POL(eirq)) == 0) +#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI +#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO + +/* + *************************************************************************** + * Memory Controller defines * + *************************************************************************** + */ + +/* Indirect memory controller registers */ +#define DDRC_CFG(n) (n) +#define DDRC_DEBUG(n) (0x04 + n) +#define DDRC_CTL(n) (0x40 + n) + +/* Macro to perform DDRC indirect write */ +#define DDRC_INDIRECT_WRITE(reg, mask, value) \ +({ \ + *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ + *MEM_SS_DATA = (value); \ + *MEM_SS_WRITE = 1; \ +}) + +/* + *************************************************************************** + * SPI/MPI Mode * + *************************************************************************** + */ +#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ +#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ +#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ +#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ + +/* + *************************************************************************** + * SPI/MPI Control Register * + *************************************************************************** + */ +#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ +#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ +#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ + +#endif /* !_ASM_MSP_REGS_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h new file mode 100644 index 00000000000..96d4c8ce8c8 --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h @@ -0,0 +1,141 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_SLP_INT_H +#define _MSP_SLP_INT_H + +/* + * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded + * hierarchical system. The first level are the direct MIPS interrupts + * and are assigned the interrupt range 0-7. The second level is the SLM + * interrupt controller and is assigned the range 8-39. The third level + * comprises the Peripherial block, the PCI block, the PCI MSI block and + * the SLP. The PCI interrupts and the SLP errors are handled by the + * relevant subsystems so the core interrupt code needs only concern + * itself with the Peripheral block. These are assigned interrupts in + * the range 40-71. + */ + +/* + * IRQs directly connected to CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ +#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ +#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ +#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definition for the SLM + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) + /* External interrupt 3 */ +/* Reserved 4-7 */ + +/* + ************************************************************************* + * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * + * Some MSP produces have this interrupt labelled as Voice and some are * + * SEC mbox ... * + ************************************************************************* + */ +#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) + /* Cascaded IRQ for Voice Engine*/ +#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) + /* IRQ for security engine */ +#define MSP_INT_PER (MSP_SLP_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) + /* Cascaded MIPS timer */ +#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) + /* PCI doorbell */ +#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) + /* PCI Block Copy 0 */ +#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) + /* PCI Block Copy 1 */ +#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) + /* IRQ for MAC2 */ +/* Reserved 26-31 */ + +/* + * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_SLP_INT_H */ diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h index 5f80ba71ab9..1d8b9a8ae32 100644 --- a/include/asm-mips/processor.h +++ b/include/asm-mips/processor.h @@ -82,10 +82,6 @@ struct mips_fpu_struct { unsigned int fcr31; }; -#define INIT_FPU { \ - {0,} \ -} - #define NUM_DSP_REGS 6 typedef __u32 dspreg_t; @@ -95,8 +91,6 @@ struct mips_dsp_state { unsigned int dspcontrol; }; -#define INIT_DSP {{0,},} - #define INIT_CPUMASK { \ {0,} \ } @@ -155,41 +149,63 @@ struct thread_struct { #define MF_N64 0 #ifdef CONFIG_MIPS_MT_FPAFF -#define FPAFF_INIT 0, INIT_CPUMASK, +#define FPAFF_INIT \ + .emulated_fp = 0, \ + .user_cpus_allowed = INIT_CPUMASK, #else #define FPAFF_INIT #endif /* CONFIG_MIPS_MT_FPAFF */ -#define INIT_THREAD { \ - /* \ - * saved main processor registers \ - */ \ - 0, 0, 0, 0, 0, 0, 0, 0, \ - 0, 0, 0, \ - /* \ - * saved cp0 stuff \ - */ \ - 0, \ - /* \ - * saved fpu/fpu emulator stuff \ - */ \ - INIT_FPU, \ - /* \ - * fpu affinity state (null if not FPAFF) \ - */ \ - FPAFF_INIT \ - /* \ - * saved dsp/dsp emulator stuff \ - */ \ - INIT_DSP, \ - /* \ - * Other stuff associated with the process \ - */ \ - 0, 0, 0, 0, \ - /* \ - * For now the default is to fix address errors \ - */ \ - MF_FIXADE, 0, 0 \ +#define INIT_THREAD { \ + /* \ + * Saved main processor registers \ + */ \ + .reg16 = 0, \ + .reg17 = 0, \ + .reg18 = 0, \ + .reg19 = 0, \ + .reg20 = 0, \ + .reg21 = 0, \ + .reg22 = 0, \ + .reg23 = 0, \ + .reg29 = 0, \ + .reg30 = 0, \ + .reg31 = 0, \ + /* \ + * Saved cp0 stuff \ + */ \ + .cp0_status = 0, \ + /* \ + * Saved FPU/FPU emulator stuff \ + */ \ + .fpu = { \ + .fpr = {0,}, \ + .fcr31 = 0, \ + }, \ + /* \ + * FPU affinity state (null if not FPAFF) \ + */ \ + FPAFF_INIT \ + /* \ + * Saved DSP stuff \ + */ \ + .dsp = { \ + .dspr = {0, }, \ + .dspcontrol = 0, \ + }, \ + /* \ + * Other stuff associated with the process \ + */ \ + .cp0_badvaddr = 0, \ + .cp0_baduaddr = 0, \ + .error_code = 0, \ + .trap_no = 0, \ + /* \ + * For now the default is to fix address errors \ + */ \ + .mflags = MF_FIXADE, \ + .irix_trampoline = 0, \ + .irix_oldctx = 0, \ } struct task_struct; @@ -237,7 +253,7 @@ unsigned long get_wchan(struct task_struct *p); #define ARCH_HAS_PREFETCH -extern inline void prefetch(const void *addr) +static inline void prefetch(const void *addr) { __asm__ __volatile__( " .set mips4 \n" diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h index 1906938285c..85b44366343 100644 --- a/include/asm-mips/ptrace.h +++ b/include/asm-mips/ptrace.h @@ -86,7 +86,7 @@ struct pt_regs { extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); -extern NORET_TYPE void die(const char *, struct pt_regs *); +extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; static inline void die_if_kernel(const char *str, struct pt_regs *regs) { diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h deleted file mode 100644 index 82ad401c7dc..00000000000 --- a/include/asm-mips/rtc.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-mips/rtc.h - * - * (Really an interface for drivers/char/genrtc.c) - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * Please read the COPYING file for all license details. - */ - -#ifndef _MIPS_RTC_H -#define _MIPS_RTC_H - -#ifdef __KERNEL__ - -#include <linux/rtc.h> -#include <asm/time.h> - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - unsigned long nowtime; - - nowtime = rtc_mips_get_time(); - to_tm(nowtime, time); - time->tm_year -= 1900; - - return RTC_24H; -} - -static inline int set_rtc_time(struct rtc_time *time) -{ - unsigned long nowtime; - int ret; - - nowtime = mktime(time->tm_year+1900, time->tm_mon+1, - time->tm_mday, time->tm_hour, time->tm_min, - time->tm_sec); - ret = rtc_mips_set_time(nowtime); - - return ret; -} - -static inline unsigned int get_rtc_ss(void) -{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} - -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} -#endif -#endif diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index ce51213d84f..c07ebd8eb9e 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -19,159 +19,4 @@ */ #define BASE_BAUD (1843200 / 16) -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#ifdef CONFIG_MACH_JAZZ -#include <asm/jazz.h> - -#ifndef CONFIG_OLIVETTI_M700 - /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know - exactly which ones ... XXX */ -#define JAZZ_BASE_BAUD ( 8000000 / 16 ) /* ( 3072000 / 16) */ -#else -/* but the M700 isn't such a strange beast */ -#define JAZZ_BASE_BAUD BASE_BAUD -#endif - -#define _JAZZ_SERIAL_INIT(int, base) \ - { .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, .iomem_reg_shift = 0, \ - .io_type = SERIAL_IO_MEM } -#define JAZZ_SERIAL_PORT_DEFNS \ - _JAZZ_SERIAL_INIT(JAZZ_SERIAL1_IRQ, JAZZ_SERIAL1_BASE), \ - _JAZZ_SERIAL_INIT(JAZZ_SERIAL2_IRQ, JAZZ_SERIAL2_BASE), -#else -#define JAZZ_SERIAL_PORT_DEFNS -#endif - -/* - * Galileo EV64120 evaluation board - */ -#ifdef CONFIG_MIPS_EV64120 -#include <mach-gt64120.h> -#define EV64120_SERIAL_PORT_DEFNS \ - { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM }, \ - { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM }, -#else -#define EV64120_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT -#define STD_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ - -#else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ -#define STD_SERIAL_PORT_DEFNS -#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */ - -#ifdef CONFIG_MOMENCO_OCELOT_3 -#define OCELOT_3_BASE_BAUD ( 20000000 / 16 ) -#define OCELOT_3_SERIAL_IRQ 6 -#define OCELOT_3_SERIAL_BASE (signed)0xfd000020 - -#define _OCELOT_3_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ - io_type: SERIAL_IO_MEM } - -#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ - _OCELOT_3_SERIAL_INIT(OCELOT_3_SERIAL_IRQ, OCELOT_3_SERIAL_BASE) -#else -#define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_SERIAL1_IRQ 4 -#define OCELOT_SERIAL1_BASE 0xe0001020 - -#define _OCELOT_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM } -#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ - _OCELOT_SERIAL_INIT(OCELOT_SERIAL1_IRQ, OCELOT_SERIAL1_BASE) -#else -#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_MOMENCO_OCELOT_C -/* Ordinary NS16552 duart with a 20MHz crystal. */ -#define OCELOT_C_BASE_BAUD ( 20000000 / 16 ) - -#define OCELOT_C_SERIAL1_IRQ 80 -#define OCELOT_C_SERIAL1_BASE 0xfd000020 - -#define OCELOT_C_SERIAL2_IRQ 81 -#define OCELOT_C_SERIAL2_BASE 0xfd000000 - -#define _OCELOT_C_SERIAL_INIT(int, base) \ - { .baud_base = OCELOT_C_BASE_BAUD, \ - .irq = (int), \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) base, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM \ - } -#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ - _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL1_IRQ, OCELOT_C_SERIAL1_BASE), \ - _OCELOT_C_SERIAL_INIT(OCELOT_C_SERIAL2_IRQ, OCELOT_C_SERIAL2_BASE) -#else -#define MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_DDB5477 -#include <asm/ddb5xxx/ddb5477.h> -#define DDB5477_SERIAL_PORT_DEFNS \ - { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART0, \ - .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04200, \ - .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, \ - { .baud_base = BASE_BAUD, .irq = VRC5477_IRQ_UART1, \ - .flags = STD_COM_FLAGS, .iomem_base = (u8*)0xbfa04240, \ - .iomem_reg_shift = 3, .io_type = SERIAL_IO_MEM}, -#else -#define DDB5477_SERIAL_PORT_DEFNS -#endif - -#ifdef CONFIG_SGI_IP32 -/* - * The IP32 (SGI O2) has standard serial ports (UART 16550A) mapped in memory - * They are initialized in ip32_setup - */ -#define IP32_SERIAL_PORT_DEFNS \ - {},{}, -#else -#define IP32_SERIAL_PORT_DEFNS -#endif /* CONFIG_SGI_IP32 */ - -#define SERIAL_PORT_DFNS \ - DDB5477_SERIAL_PORT_DEFNS \ - EV64120_SERIAL_PORT_DEFNS \ - IP32_SERIAL_PORT_DEFNS \ - JAZZ_SERIAL_PORT_DEFNS \ - STD_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ - MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS - #endif /* _ASM_SERIAL_H */ diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h index 1608fd71d6f..13aef6af422 100644 --- a/include/asm-mips/smp.h +++ b/include/asm-mips/smp.h @@ -49,13 +49,6 @@ extern struct call_data_struct *call_data; extern cpumask_t phys_cpu_present_map; #define cpu_possible_map phys_cpu_present_map -extern cpumask_t cpu_callout_map; -/* We don't mark CPUs online until __cpu_up(), so we need another measure */ -static inline int num_booting_cpus(void) -{ - return cpus_weight(cpu_callout_map); -} - /* * These are defined by the board-specific code. */ diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h index f257509b914..ddaf36a1e38 100644 --- a/include/asm-mips/sni.h +++ b/include/asm-mips/sni.h @@ -146,9 +146,6 @@ extern unsigned int sni_brd_type; #define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE #define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) -#define SNI_DS1216_A20R_BASE 0xbc081ffc -#define SNI_DS1216_RM200_BASE 0xbcd41ffc - #define SNI_PCIT_INT_REG 0xbfff000c #define SNI_PCIT_INT_START 24 diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index 7afa1fdf70c..ed33366b85b 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -17,6 +17,18 @@ #include <asm/mipsregs.h> #include <asm/asm-offsets.h> +/* + * For SMTC kernel, global IE should be left set, and interrupts + * controlled exclusively via IXMT. + */ +#ifdef CONFIG_MIPS_MT_SMTC +#define STATMASK 0x1e +#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +#define STATMASK 0x3f +#else +#define STATMASK 0x1f +#endif + #ifdef CONFIG_MIPS_MT_SMTC #include <asm/mipsmtregs.h> #endif /* CONFIG_MIPS_MT_SMTC */ @@ -236,10 +248,10 @@ .set reorder .set noat mfc0 a0, CP0_STATUS - ori a0, 0x1f - xori a0, 0x1f - mtc0 a0, CP0_STATUS li v1, 0xff00 + ori a0, STATMASK + xori a0, STATMASK + mtc0 a0, CP0_STATUS and a0, v1 LONG_L v0, PT_STATUS(sp) nor v1, $0, v1 @@ -249,10 +261,6 @@ LONG_L $31, PT_R31(sp) LONG_L $28, PT_R28(sp) LONG_L $25, PT_R25(sp) -#ifdef CONFIG_64BIT - LONG_L $8, PT_R8(sp) - LONG_L $9, PT_R9(sp) -#endif LONG_L $7, PT_R7(sp) LONG_L $6, PT_R6(sp) LONG_L $5, PT_R5(sp) @@ -273,16 +281,6 @@ .endm #else -/* - * For SMTC kernel, global IE should be left set, and interrupts - * controlled exclusively via IXMT. - */ - -#ifdef CONFIG_MIPS_MT_SMTC -#define STATMASK 0x1e -#else -#define STATMASK 0x1f -#endif .macro RESTORE_SOME .set push .set reorder @@ -385,9 +383,9 @@ .macro CLI #if !defined(CONFIG_MIPS_MT_SMTC) mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | 0x1f + li t1, ST0_CU0 | STATMASK or t0, t1 - xori t0, 0x1f + xori t0, STATMASK mtc0 t0, CP0_STATUS #else /* CONFIG_MIPS_MT_SMTC */ /* @@ -420,9 +418,9 @@ .macro STI #if !defined(CONFIG_MIPS_MT_SMTC) mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | 0x1f + li t1, ST0_CU0 | STATMASK or t0, t1 - xori t0, 0x1e + xori t0, STATMASK & ~1 mtc0 t0, CP0_STATUS #else /* CONFIG_MIPS_MT_SMTC */ /* @@ -451,7 +449,8 @@ .endm /* - * Just move to kernel mode and leave interrupts as they are. + * Just move to kernel mode and leave interrupts as they are. Note + * for the R3000 this means copying the previous enable from IEp. * Set cp0 enable bit as sign that we're running on the kernel stack */ .macro KMODE @@ -482,9 +481,14 @@ move ra, t0 #endif /* CONFIG_MIPS_MT_SMTC */ mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | 0x1e + li t1, ST0_CU0 | (STATMASK & ~1) +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + andi t2, t0, ST0_IEP + srl t2, 2 + or t0, t2 +#endif or t0, t1 - xori t0, 0x1e + xori t0, STATMASK & ~1 mtc0 t0, CP0_STATUS #ifdef CONFIG_MIPS_MT_SMTC _ehb diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index bb0b289dbc9..46bdb3f566f 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -44,7 +44,7 @@ struct task_struct; * different thread. */ -#define switch_to(prev,next,last) \ +#define __mips_mt_fpaff_switch_to(prev) \ do { \ if (cpu_has_fpu && \ (prev->thread.mflags & MF_FPUBOUND) && \ @@ -52,24 +52,24 @@ do { \ prev->thread.mflags &= ~MF_FPUBOUND; \ prev->cpus_allowed = prev->thread.user_cpus_allowed; \ } \ - if (cpu_has_dsp) \ - __save_dsp(prev); \ next->thread.emulated_fp = 0; \ - (last) = resume(prev, next, task_thread_info(next)); \ - if (cpu_has_dsp) \ - __restore_dsp(current); \ } while(0) #else +#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0) +#endif + #define switch_to(prev,next,last) \ do { \ + __mips_mt_fpaff_switch_to(prev); \ if (cpu_has_dsp) \ __save_dsp(prev); \ (last) = resume(prev, next, task_thread_info(next)); \ if (cpu_has_dsp) \ __restore_dsp(current); \ + if (cpu_has_userlocal) \ + write_c0_userlocal(task_thread_info(current)->tp_value);\ } while(0) -#endif /* * On SMP systems, when the scheduler does migration-cost autodetection, diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h index 0bbe07b42a0..5bfdc3b6451 100644 --- a/include/asm-mips/termbits.h +++ b/include/asm-mips/termbits.h @@ -30,6 +30,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + struct ktermios { tcflag_t c_iflag; /* input mode flags */ tcflag_t c_oflag; /* output mode flags */ diff --git a/include/asm-mips/tlbdebug.h b/include/asm-mips/tlbdebug.h index fff7a73e22d..bb8f5c29c3d 100644 --- a/include/asm-mips/tlbdebug.h +++ b/include/asm-mips/tlbdebug.h @@ -11,10 +11,6 @@ /* * TLB debugging functions: */ -extern void dump_tlb(int first, int last); extern void dump_tlb_all(void); -extern void dump_tlb_wired(void); -extern void dump_tlb_addr(unsigned long addr); -extern void dump_tlb_nonwired(void); #endif /* __ASM_TLBDEBUG_H */ diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h index 0fbedafdcea..74e7d8061e5 100644 --- a/include/asm-mips/tx4938/rbtx4938.h +++ b/include/asm-mips/tx4938/rbtx4938.h @@ -105,12 +105,6 @@ #define rbtx4938_pcireset_ptr \ ((volatile unsigned char *)RBTX4938_PCIRESET_ADDR) -/* SPI */ -#define RBTX4938_SEEPROM1_CHIPID 0 -#define RBTX4938_SEEPROM2_CHIPID 1 -#define RBTX4938_SEEPROM3_CHIPID 2 -#define RBTX4938_SRTC_CHIPID 3 - /* * IRQ mappings */ diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/tx4938/spi.h index 0dbbab820a5..6a60c83e152 100644 --- a/include/asm-mips/tx4938/spi.h +++ b/include/asm-mips/tx4938/spi.h @@ -14,61 +14,7 @@ #ifndef __ASM_TX_BOARDS_TX4938_SPI_H #define __ASM_TX_BOARDS_TX4938_SPI_H -/* SPI */ -struct spi_dev_desc { - unsigned int baud; - unsigned short tcss, tcsh, tcsr; /* CS setup/hold/recovery time */ - unsigned int byteorder:1; /* 0:LSB-First, 1:MSB-First */ - unsigned int polarity:1; /* 0:High-Active */ - unsigned int phase:1; /* 0:Sample-Then-Shift */ -}; - -extern void txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on)) __init; -extern void txx9_spi_irqinit(int irc_irq) __init; -extern int txx9_spi_io(int chipid, struct spi_dev_desc *desc, - unsigned char **inbufs, unsigned int *incounts, - unsigned char **outbufs, unsigned int *outcounts, - int cansleep); -extern int spi_eeprom_write_enable(int chipid, int enable); -extern int spi_eeprom_read_status(int chipid); +extern int spi_eeprom_register(int chipid); extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); -extern int spi_eeprom_write(int chipid, int address, unsigned char *buf, int len); -extern void spi_eeprom_proc_create(struct proc_dir_entry *dir, int chipid) __init; - -#define TXX9_IMCLK (txx9_gbus_clock / 2) - -/* -* SPI -*/ - -/* SPMCR : SPI Master Control */ -#define TXx9_SPMCR_OPMODE 0xc0 -#define TXx9_SPMCR_CONFIG 0x40 -#define TXx9_SPMCR_ACTIVE 0x80 -#define TXx9_SPMCR_SPSTP 0x02 -#define TXx9_SPMCR_BCLR 0x01 - -/* SPCR0 : SPI Status */ -#define TXx9_SPCR0_TXIFL_MASK 0xc000 -#define TXx9_SPCR0_RXIFL_MASK 0x3000 -#define TXx9_SPCR0_SIDIE 0x0800 -#define TXx9_SPCR0_SOEIE 0x0400 -#define TXx9_SPCR0_RBSIE 0x0200 -#define TXx9_SPCR0_TBSIE 0x0100 -#define TXx9_SPCR0_IFSPSE 0x0010 -#define TXx9_SPCR0_SBOS 0x0004 -#define TXx9_SPCR0_SPHA 0x0002 -#define TXx9_SPCR0_SPOL 0x0001 - -/* SPSR : SPI Status */ -#define TXx9_SPSR_TBSI 0x8000 -#define TXx9_SPSR_RBSI 0x4000 -#define TXx9_SPSR_TBS_MASK 0x3800 -#define TXx9_SPSR_RBS_MASK 0x0700 -#define TXx9_SPSR_SPOE 0x0080 -#define TXx9_SPSR_IFSD 0x0008 -#define TXx9_SPSR_SIDLE 0x0004 -#define TXx9_SPSR_STRDY 0x0002 -#define TXx9_SPSR_SRRDY 0x0001 #endif /* __ASM_TX_BOARDS_TX4938_SPI_H */ diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h index 2f1087b3a20..ed16de0a639 100644 --- a/include/asm-mips/unistd.h +++ b/include/asm-mips/unistd.h @@ -336,16 +336,20 @@ #define __NR_epoll_pwait (__NR_Linux + 313) #define __NR_ioprio_set (__NR_Linux + 314) #define __NR_ioprio_get (__NR_Linux + 315) +#define __NR_utimensat (__NR_Linux + 316) +#define __NR_signalfd (__NR_Linux + 317) +#define __NR_timerfd (__NR_Linux + 318) +#define __NR_eventfd (__NR_Linux + 319) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 315 +#define __NR_Linux_syscalls 319 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 315 +#define __NR_O32_Linux_syscalls 319 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -628,16 +632,20 @@ #define __NR_epoll_pwait (__NR_Linux + 272) #define __NR_ioprio_set (__NR_Linux + 273) #define __NR_ioprio_get (__NR_Linux + 274) +#define __NR_utimensat (__NR_Linux + 275) +#define __NR_signalfd (__NR_Linux + 276) +#define __NR_timerfd (__NR_Linux + 277) +#define __NR_eventfd (__NR_Linux + 278) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 274 +#define __NR_Linux_syscalls 278 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 274 +#define __NR_64_Linux_syscalls 278 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -924,16 +932,20 @@ #define __NR_epoll_pwait (__NR_Linux + 276) #define __NR_ioprio_set (__NR_Linux + 277) #define __NR_ioprio_get (__NR_Linux + 278) +#define __NR_utimensat (__NR_Linux + 279) +#define __NR_signalfd (__NR_Linux + 280) +#define __NR_timerfd (__NR_Linux + 281) +#define __NR_eventfd (__NR_Linux + 282) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 278 +#define __NR_Linux_syscalls 282 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 278 +#define __NR_N32_Linux_syscalls 282 #ifdef __KERNEL__ @@ -949,7 +961,6 @@ #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_WAITPID #define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE @@ -966,6 +977,22 @@ # define __ARCH_WANT_COMPAT_SYS_TIME # endif +/* whitelists for checksyscalls */ +#define __IGNORE_select +#define __IGNORE_vfork +#define __IGNORE_time +#define __IGNORE_uselib +#define __IGNORE_fadvise64_64 +#define __IGNORE_getdents64 +#if _MIPS_SIM == _MIPS_SIM_NABI32 +#define __IGNORE_truncate64 +#define __IGNORE_ftruncate64 +#define __IGNORE_stat64 +#define __IGNORE_lstat64 +#define __IGNORE_fstat64 +#define __IGNORE_fstatat64 +#endif + #endif /* !__ASSEMBLY__ */ /* diff --git a/include/asm-mips/vr41xx/giu.h b/include/asm-mips/vr41xx/giu.h index 8109cda557d..0bcdd3a5c25 100644 --- a/include/asm-mips/vr41xx/giu.h +++ b/include/asm-mips/vr41xx/giu.h @@ -20,6 +20,15 @@ #ifndef __NEC_VR41XX_GIU_H #define __NEC_VR41XX_GIU_H +/* + * NEC VR4100 series GIU platform device IDs. + */ +enum { + GPIO_50PINS_PULLUPDOWN, + GPIO_36PINS, + GPIO_48PINS_EDGE_SELECT, +}; + typedef enum { IRQ_TRIGGER_LEVEL, IRQ_TRIGGER_EDGE, diff --git a/include/asm-mips/vr41xx/siu.h b/include/asm-mips/vr41xx/siu.h index 1fcf6e8082b..98cdb409648 100644 --- a/include/asm-mips/vr41xx/siu.h +++ b/include/asm-mips/vr41xx/siu.h @@ -20,6 +20,8 @@ #ifndef __NEC_VR41XX_SIU_H #define __NEC_VR41XX_SIU_H +#define SIU_PORTS_MAX 2 + typedef enum { SIU_INTERFACE_RS232C, SIU_INTERFACE_IRDA, diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index 13a3502eef4..9de52a5b0f3 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -169,26 +169,28 @@ /* * On the RM9000 there is a problem which makes the CreateDirtyExclusive - * cache operation unusable on SMP systems. + * eache operation unusable on SMP systems. */ -#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE) || \ - defined(CONFIG_BASLER_EXCITE) +#if defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE) #define RM9000_CDEX_SMP_WAR 1 #endif /* - * The RM9000 has a bug (though PMC-Sierra opposes it being called that) - * where invalid instructions in the same I-cache line worth of instructions - * being fetched may case spurious exceptions. + * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra + * opposes it being called that) where invalid instructions in the same + * I-cache line worth of instructions being fetched may case spurious + * exceptions. */ -#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \ - defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE) +#if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \ + defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \ + defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \ + defined(CONFIG_WR_PPMC) #define ICACHE_REFILLS_WORKAROUND_WAR 1 #endif /* - * ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that + * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that * may cause ll / sc and lld / scd sequences to execute non-atomically. */ #ifdef CONFIG_SGI_IP27 @@ -196,6 +198,14 @@ #endif /* + * 34K core erratum: "Problems Executing the TLBR Instruction" + */ +#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_FPGA) +#define MIPS34K_MISSED_ITLB_WAR 1 +#endif + +/* * Workarounds default to off */ #ifndef ICACHE_REFILLS_WORKAROUND_WAR @@ -234,5 +244,8 @@ #ifndef R10000_LLSC_WAR #define R10000_LLSC_WAR 0 #endif +#ifndef MIPS34K_MISSED_ITLB_WAR +#define MIPS34K_MISSED_ITLB_WAR 0 +#endif #endif /* _ASM_WAR_H */ diff --git a/include/asm-mips/watch.h b/include/asm-mips/watch.h deleted file mode 100644 index 6aa90cae111..00000000000 --- a/include/asm-mips/watch.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 2000, 2001 by Ralf Baechle - */ -#ifndef _ASM_WATCH_H -#define _ASM_WATCH_H - -#include <linux/linkage.h> - -/* - * Types of reference for watch_set() - */ -enum wref_type { - wr_save = 1, - wr_load = 2 -}; - -extern asmlinkage void __watch_set(unsigned long addr, enum wref_type ref); -extern asmlinkage void __watch_clear(void); -extern asmlinkage void __watch_reenable(void); - -#define watch_set(addr, ref) \ - if (cpu_has_watch) \ - __watch_set(addr, ref) -#define watch_clear() \ - if (cpu_has_watch) \ - __watch_clear() -#define watch_reenable() \ - if (cpu_has_watch) \ - __watch_reenable() - -#endif /* _ASM_WATCH_H */ |