diff options
Diffstat (limited to 'include/asm-mn10300/system.h')
| -rw-r--r-- | include/asm-mn10300/system.h | 237 |
1 files changed, 0 insertions, 237 deletions
diff --git a/include/asm-mn10300/system.h b/include/asm-mn10300/system.h deleted file mode 100644 index 8214fb7e7fe..00000000000 --- a/include/asm-mn10300/system.h +++ /dev/null @@ -1,237 +0,0 @@ -/* MN10300 System definitions - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_SYSTEM_H -#define _ASM_SYSTEM_H - -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include <linux/kernel.h> - -struct task_struct; -struct thread_struct; - -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev, - struct thread_struct *next, - struct task_struct *prev_task); - -/* context switching is now performed out-of-line in switch_to.S */ -#define switch_to(prev, next, last) \ -do { \ - current->thread.wchan = (u_long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ - current->thread.wchan = 0; \ -} while (0) - -#define arch_align_stack(x) (x) - -#define nop() asm volatile ("nop") - -#endif /* !__ASSEMBLY__ */ - -/* - * Force strict CPU ordering. - * And yes, this is required on UP too when we're talking - * to devices. - * - * For now, "wmb()" doesn't actually do anything, as all - * Intel CPU's follow what Intel calls a *Processor Order*, - * in which all writes are seen in the program order even - * outside the CPU. - * - * I expect future Intel CPU's to have a weaker ordering, - * but I'd also expect them to finally get their act together - * and add some real memory barriers if so. - * - * Some non intel clones support out of order store. wmb() ceases to be a - * nop for these. - */ - -#define mb() asm volatile ("": : :"memory") -#define rmb() mb() -#define wmb() asm volatile ("": : :"memory") - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#endif - -#define set_mb(var, value) do { var = value; mb(); } while (0) -#define set_wmb(var, value) do { var = value; wmb(); } while (0) - -#define read_barrier_depends() do {} while (0) -#define smp_read_barrier_depends() do {} while (0) - -/*****************************************************************************/ -/* - * interrupt control - * - "disabled": run in IM1/2 - * - level 0 - GDB stub - * - level 1 - virtual serial DMA (if present) - * - level 5 - normal interrupt priority - * - level 6 - timer interrupt - * - "enabled": run in IM7 - */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif - -#define local_save_flags(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov epsw,%0 \n" \ - : "=d"(x) \ - ); \ -} while (0) - -#define local_irq_disable() \ -do { \ - asm volatile( \ - " and %0,epsw \n" \ - " or %1,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \ - ); \ -} while (0) - -#define local_irq_save(x) \ -do { \ - local_save_flags(x); \ - local_irq_disable(); \ -} while (0) - -/* - * we make sure local_irq_enable() doesn't cause priority inversion - */ -#ifndef __ASSEMBLY__ - -extern unsigned long __mn10300_irq_enabled_epsw; - -#endif - -#define local_irq_enable() \ -do { \ - unsigned long tmp; \ - \ - asm volatile( \ - " mov epsw,%0 \n" \ - " and %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,epsw \n" \ - : "=&d"(tmp) \ - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \ - ); \ -} while (0) - -#define local_irq_restore(x) \ -do { \ - typecheck(unsigned long, x); \ - asm volatile( \ - " mov %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " nop \n" \ - : \ - : "d"(x) \ - : "memory", "cc" \ - ); \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \ -}) - -/* hook to save power by halting the CPU - * - called from the idle loop - * - must reenable interrupts (which takes three instruction cycles to complete) - */ -#define safe_halt() \ -do { \ - asm volatile(" or %0,epsw \n" \ - " nop \n" \ - " nop \n" \ - " bset %2,(%1) \n" \ - : \ - : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\ - : "cc" \ - ); \ -} while (0) - -#define STI or EPSW_IE|EPSW_IM,epsw -#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop - -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_SYSTEM_H */ |