diff options
Diffstat (limited to 'include/asm-powerpc/hvcall.h')
| -rw-r--r-- | include/asm-powerpc/hvcall.h | 185 |
1 files changed, 146 insertions, 39 deletions
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h index b72c04f3f55..6cc7e1fb7bf 100644 --- a/include/asm-powerpc/hvcall.h +++ b/include/asm-powerpc/hvcall.h @@ -4,47 +4,88 @@ #define HVSC .long 0x44000022 -#define H_Success 0 -#define H_Busy 1 /* Hardware busy -- retry later */ -#define H_Closed 2 /* Resource closed */ -#define H_Constrained 4 /* Resource request constrained to max allowed */ -#define H_InProgress 14 /* Kind of like busy */ -#define H_Pending 17 /* returned from H_POLL_PENDING */ -#define H_Continue 18 /* Returned from H_Join on success */ -#define H_LongBusyStartRange 9900 /* Start of long busy range */ -#define H_LongBusyOrder1msec 9900 /* Long busy, hint that 1msec is a good time to retry */ -#define H_LongBusyOrder10msec 9901 /* Long busy, hint that 10msec is a good time to retry */ -#define H_LongBusyOrder100msec 9902 /* Long busy, hint that 100msec is a good time to retry */ -#define H_LongBusyOrder1sec 9903 /* Long busy, hint that 1sec is a good time to retry */ -#define H_LongBusyOrder10sec 9904 /* Long busy, hint that 10sec is a good time to retry */ -#define H_LongBusyOrder100sec 9905 /* Long busy, hint that 100sec is a good time to retry */ -#define H_LongBusyEndRange 9905 /* End of long busy range */ -#define H_Hardware -1 /* Hardware error */ -#define H_Function -2 /* Function not supported */ -#define H_Privilege -3 /* Caller not privileged */ -#define H_Parameter -4 /* Parameter invalid, out-of-range or conflicting */ -#define H_Bad_Mode -5 /* Illegal msr value */ -#define H_PTEG_Full -6 /* PTEG is full */ -#define H_Not_Found -7 /* PTE was not found" */ -#define H_Reserved_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ -#define H_NoMem -9 -#define H_Authority -10 -#define H_Permission -11 -#define H_Dropped -12 -#define H_SourceParm -13 -#define H_DestParm -14 -#define H_RemoteParm -15 -#define H_Resource -16 +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDEND -46 + /* Long Busy is a condition that can be returned by the firmware * when a call cannot be completed now, but the identical call * should be retried later. This prevents calls blocking in the - * firmware for long periods of time. Annoyingly the firmware can return + * firmware for long periods of time. Annoyingly the firmware can return * a range of return codes, hinting at how long we should wait before * retrying. If you don't care for the hint, the macro below is a good * way to check for the long_busy return codes */ -#define H_isLongBusy(x) ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange)) +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) /* Flags */ #define H_LARGE_PAGE (1UL<<(63-16)) @@ -66,6 +107,9 @@ #define H_DABRX_KERNEL (1UL<<(63-62)) #define H_DABRX_USER (1UL<<(63-63)) +/* Each control block has to be on a 4K bondary */ +#define H_CB_ALIGNMENT 4096 + /* pSeries hypervisor opcodes */ #define H_REMOVE 0x04 #define H_ENTER 0x08 @@ -99,25 +143,52 @@ #define H_PERFMON 0x7c #define H_MIGRATE_DMA 0x78 #define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 +#define H_CEDE 0xE0 #define H_CONFER 0xE4 -#define H_PROD 0xE8 +#define H_PROD 0xE8 #define H_GET_PPP 0xEC #define H_SET_PPP 0xF0 #define H_PURR 0xF4 -#define H_PIC 0xF8 +#define H_PIC 0xF8 #define H_REG_CRQ 0xFC #define H_FREE_CRQ 0x100 #define H_VIO_SIGNAL 0x104 #define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 +#define H_COPY_RDMA 0x110 #define H_SET_XDABR 0x134 #define H_STUFF_TCE 0x138 #define H_PUT_TCE_INDIRECT 0x13C #define H_VTERM_PARTNER_INFO 0x150 #define H_REGISTER_VTERM 0x154 #define H_FREE_VTERM 0x158 -#define H_POLL_PENDING 0x1D8 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GETC 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 #define H_JOIN 0x298 #define H_ENABLE_CRQ 0x2B0 @@ -152,7 +223,7 @@ long plpar_hcall_norets(unsigned long opcode, ...); */ long plpar_hcall_8arg_2ret(unsigned long opcode, unsigned long arg1, - unsigned long arg2, + unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5, @@ -176,6 +247,42 @@ long plpar_hcall_4out(unsigned long opcode, unsigned long *out3, unsigned long *out4); +long plpar_hcall_7arg_7ret(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long arg5, + unsigned long arg6, + unsigned long arg7, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3, + unsigned long *out4, + unsigned long *out5, + unsigned long *out6, + unsigned long *out7); + +long plpar_hcall_9arg_9ret(unsigned long opcode, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3, + unsigned long arg4, + unsigned long arg5, + unsigned long arg6, + unsigned long arg7, + unsigned long arg8, + unsigned long arg9, + unsigned long *out1, + unsigned long *out2, + unsigned long *out3, + unsigned long *out4, + unsigned long *out5, + unsigned long *out6, + unsigned long *out7, + unsigned long *out8, + unsigned long *out9); + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HVCALL_H */ |