aboutsummaryrefslogtreecommitdiff
path: root/include/asm-sparc64/hypervisor.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc64/hypervisor.h')
-rw-r--r--include/asm-sparc64/hypervisor.h2128
1 files changed, 2128 insertions, 0 deletions
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
new file mode 100644
index 00000000000..612bf319753
--- /dev/null
+++ b/include/asm-sparc64/hypervisor.h
@@ -0,0 +1,2128 @@
+#ifndef _SPARC64_HYPERVISOR_H
+#define _SPARC64_HYPERVISOR_H
+
+/* Sun4v hypervisor interfaces and defines.
+ *
+ * Hypervisor calls are made via traps to software traps number 0x80
+ * and above. Registers %o0 to %o5 serve as argument, status, and
+ * return value registers.
+ *
+ * There are two kinds of these traps. First there are the normal
+ * "fast traps" which use software trap 0x80 and encode the function
+ * to invoke by number in register %o5. Argument and return value
+ * handling is as follows:
+ *
+ * -----------------------------------------------
+ * | %o5 | function number | undefined |
+ * | %o0 | argument 0 | return status |
+ * | %o1 | argument 1 | return value 1 |
+ * | %o2 | argument 2 | return value 2 |
+ * | %o3 | argument 3 | return value 3 |
+ * | %o4 | argument 4 | return value 4 |
+ * -----------------------------------------------
+ *
+ * The second type are "hyper-fast traps" which encode the function
+ * number in the software trap number itself. So these use trap
+ * numbers > 0x80. The register usage for hyper-fast traps is as
+ * follows:
+ *
+ * -----------------------------------------------
+ * | %o0 | argument 0 | return status |
+ * | %o1 | argument 1 | return value 1 |
+ * | %o2 | argument 2 | return value 2 |
+ * | %o3 | argument 3 | return value 3 |
+ * | %o4 | argument 4 | return value 4 |
+ * -----------------------------------------------
+ *
+ * Registers providing explicit arguments to the hypervisor calls
+ * are volatile across the call. Upon return their values are
+ * undefined unless explicitly specified as containing a particular
+ * return value by the specific call. The return status is always
+ * returned in register %o0, zero indicates a successful execution of
+ * the hypervisor call and other values indicate an error status as
+ * defined below. So, for example, if a hyper-fast trap takes
+ * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
+ * the call and %o3, %o4, and %o5 would be preserved.
+ *
+ * If the hypervisor trap is invalid, or the fast trap function number
+ * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits
+ * of the argument and return values are significant.
+ */
+
+/* Trap numbers. */
+#define HV_FAST_TRAP 0x80
+#define HV_MMU_MAP_ADDR_TRAP 0x83
+#define HV_MMU_UNMAP_ADDR_TRAP 0x84
+#define HV_TTRACE_ADDENTRY_TRAP 0x85
+#define HV_CORE_TRAP 0xff
+
+/* Error codes. */
+#define HV_EOK 0 /* Successful return */
+#define HV_ENOCPU 1 /* Invalid CPU id */
+#define HV_ENORADDR 2 /* Invalid real address */
+#define HV_ENOINTR 3 /* Invalid interrupt id */
+#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */
+#define HV_EBADTSB 5 /* Invalid TSB description */
+#define HV_EINVAL 6 /* Invalid argument */
+#define HV_EBADTRAP 7 /* Invalid function number */
+#define HV_EBADALIGN 8 /* Invalid address alignment */
+#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */
+#define HV_ENOACCESS 10 /* No access to resource */
+#define HV_EIO 11 /* I/O error */
+#define HV_ECPUERROR 12 /* CPU in error state */
+#define HV_ENOTSUPPORTED 13 /* Function not supported */
+#define HV_ENOMAP 14 /* No mapping found */
+#define HV_ETOOMANY 15 /* Too many items specified */
+
+/* mach_exit()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_EXIT
+ * ARG0: exit code
+ * ERRORS: This service does not return.
+ *
+ * Stop all CPUs in the virtual domain and place them into the stopped
+ * state. The 64-bit exit code may be passed to a service entity as
+ * the domain's exit status. On systems without a service entity, the
+ * domain will undergo a reset, and the boot firmware will be
+ * reloaded.
+ *
+ * This function will never return to the guest that invokes it.
+ *
+ * Note: By convention an exit code of zero denotes a successful exit by
+ * the guest code. A non-zero exit code denotes a guest specific
+ * error indication.
+ *
+ */
+#define HV_FAST_MACH_EXIT 0x00
+
+/* Domain services. */
+
+/* mach_desc()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_DESC
+ * ARG0: buffer
+ * ARG1: length
+ * RET0: status
+ * RET1: length
+ * ERRORS: HV_EBADALIGN Buffer is badly aligned
+ * HV_ENORADDR Buffer is to an illegal real address.
+ * HV_EINVAL Buffer length is too small for complete
+ * machine description.
+ *
+ * Copy the most current machine description into the buffer indicated
+ * by the real address in ARG0. The buffer provided must be 16 byte
+ * aligned. Upon success or HV_EINVAL, this service returns the
+ * actual size of the machine description in the RET1 return value.
+ *
+ * Note: A method of determining the appropriate buffer size for the
+ * machine description is to first call this service with a buffer
+ * length of 0 bytes.
+ */
+#define HV_FAST_MACH_DESC 0x01
+
+/* mach_exit()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_SIR
+ * ERRORS: This service does not return.
+ *
+ * Perform a software initiated reset of the virtual machine domain.
+ * All CPUs are captured as soon as possible, all hardware devices are
+ * returned to the entry default state, and the domain is restarted at
+ * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
+ * of the CPUs. The single CPU restarted is selected as determined by
+ * platform specific policy. Memory is preserved across this
+ * operation.
+ */
+#define HV_FAST_MACH_SIR 0x02
+
+/* mach_set_soft_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0: software state
+ * ARG1: software state description pointer
+ * RET0: status
+ * ERRORS: EINVAL software state not valid or software state
+ * description is not NULL terminated
+ * ENORADDR software state description pointer is not a
+ * valid real address
+ * EBADALIGNED software state description is not correctly
+ * aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor. There
+ * are two primary components to this state. The first part states whether
+ * the guest software is running or not. The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE 0x03
+#define HV_SOFT_STATE_NORMAL 0x01
+#define HV_SOFT_STATE_TRANSITION 0x02
+
+/* mach_get_soft_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0: software state description pointer
+ * RET0: status
+ * RET1: software state
+ * ERRORS: ENORADDR software state description pointer is not a
+ * valid real address
+ * EBADALIGNED software state description is not correctly
+ * aligned
+ *
+ * Retrieve the current value of the guest's software state. The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE 0x04
+
+/* CPU services.
+ *
+ * CPUs represent devices that can execute software threads. A single
+ * chip that contains multiple cores or strands is represented as
+ * multiple CPUs with unique CPU identifiers. CPUs are exported to
+ * OBP via the machine description (and to the OS via the OBP device
+ * tree). CPUs are always in one of three states: stopped, running,
+ * or error.
+ *
+ * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
+ * CPU within a logical domain. Operations that are to be performed
+ * on multiple CPUs specify them via a CPU list. A CPU list is an
+ * array in real memory, of which each 16-bit word is a CPU ID. CPU
+ * lists are passed through the API as two arguments. The first is
+ * the number of entries (16-bit words) in the CPU list, and the
+ * second is the (real address) pointer to the CPU ID list.
+ */
+
+/* cpu_start()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_START
+ * ARG0: CPU ID
+ * ARG1: PC
+ * ARG1: RTBA
+ * ARG1: target ARG0
+ * RET0: status
+ * ERRORS: ENOCPU Invalid CPU ID
+ * EINVAL Target CPU ID is not in the stopped state
+ * ENORADDR Invalid PC or RTBA real address
+ * EBADALIGN Unaligned PC or unaligned RTBA
+ * EWOULDBLOCK Starting resources are not available
+ *
+ * Start CPU with given CPU ID with PC in %pc and with a real trap
+ * base address value of RTBA. The indicated CPU must be in the
+ * stopped state. The supplied RTBA must be aligned on a 256 byte
+ * boundary. On successful completion, the specified CPU will be in
+ * the running state and will be supplied with "target ARG0" in %o0
+ * and RTBA in %tba.
+ */
+#define HV_FAST_CPU_START 0x10
+
+/* cpu_stop()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_STOP
+ * ARG0: CPU ID
+ * RET0: status
+ * ERRORS: ENOCPU Invalid CPU ID
+ * EINVAL Target CPU ID is the current cpu
+ * EINVAL Target CPU ID is not in the running state
+ * EWOULDBLOCK Stopping resources are not available
+ * ENOTSUPPORTED Not supported on this platform
+ *
+ * The specified CPU is stopped. The indicated CPU must be in the
+ * running state. On completion, it will be in the stopped state. It
+ * is not legal to stop the current CPU.
+ *
+ * Note: As this service cannot be used to stop the current cpu, this service
+ * may not be used to stop the last running CPU in a domain. To stop
+ * and exit a running domain, a guest must use the mach_exit() service.
+ */
+#define HV_FAST_CPU_STOP 0x11
+
+/* cpu_yield()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_YIELD
+ * RET0: status
+ * ERRORS: No possible error.
+ *
+ * Suspend execution on the current CPU. Execution will resume when
+ * an interrupt (device, %stick_compare, or cross-call) is targeted to
+ * the CPU. On some CPUs, this API may be used by the hypervisor to
+ * save power by disabling hardware strands.
+ */
+#define HV_FAST_CPU_YIELD 0x12
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_yield(void);
+#endif
+
+/* cpu_qconf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_QCONF
+ * ARG0: queue
+ * ARG1: base real address
+ * ARG2: number of entries
+ * RET0: status
+ * ERRORS: ENORADDR Invalid base real address
+ * EINVAL Invalid queue or number of entries is less
+ * than 2 or too large.
+ * EBADALIGN Base real address is not correctly aligned
+ * for size.
+ *
+ * Configure the given queue to be placed at the given base real
+ * address, with the given number of entries. The number of entries
+ * must be a power of 2. The base real address must be aligned
+ * exactly to match the queue size. Each queue entry is 64 bytes
+ * long, so for example a 32 entry queue must be aligned on a 2048
+ * byte real address boundary.
+ *
+ * The specified queue is unconfigured if the number of entries is given
+ * as zero.
+ *
+ * For the current version of this API service, the argument queue is defined
+ * as follows:
+ *
+ * queue description
+ * ----- -------------------------
+ * 0x3c cpu mondo queue
+ * 0x3d device mondo queue
+ * 0x3e resumable error queue
+ * 0x3f non-resumable error queue
+ *
+ * Note: The maximum number of entries for each queue for a specific cpu may
+ * be determined from the machine description.
+ */
+#define HV_FAST_CPU_QCONF 0x14
+#define HV_CPU_QUEUE_CPU_MONDO 0x3c
+#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d
+#define HV_CPU_QUEUE_RES_ERROR 0x3e
+#define HV_CPU_QUEUE_NONRES_ERROR 0x3f
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_qconf(unsigned long type,
+ unsigned long queue_paddr,
+ unsigned long num_queue_entries);
+#endif
+
+/* cpu_qinfo()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_QINFO
+ * ARG0: queue
+ * RET0: status
+ * RET1: base real address
+ * RET1: number of entries
+ * ERRORS: EINVAL Invalid queue
+ *
+ * Return the configuration info for the given queue. The base real
+ * address and number of entries of the defined queue are returned.
+ * The queue argument values are the same as for cpu_qconf() above.
+ *
+ * If the specified queue is a valid queue number, but no queue has
+ * been defined, the number of entries will be set to zero and the
+ * base real address returned is undefined.
+ */
+#define HV_FAST_CPU_QINFO 0x15
+
+/* cpu_mondo_send()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_MONDO_SEND
+ * ARG0-1: CPU list
+ * ARG2: data real address
+ * RET0: status
+ * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list
+ * is not 2-byte aligned.
+ * ENORADDR Invalid data mondo address, or invalid cpu list
+ * address.
+ * ENOCPU Invalid cpu in CPU list
+ * EWOULDBLOCK Some or all of the listed CPUs did not receive
+ * the mondo
+ * ECPUERROR One or more of the listed CPUs are in error
+ * state, use HV_FAST_CPU_STATE to see which ones
+ * EINVAL CPU list includes caller's CPU ID
+ *
+ * Send a mondo interrupt to the CPUs in the given CPU list with the
+ * 64-bytes at the given data real address. The data must be 64-byte
+ * aligned. The mondo data will be delivered to the cpu_mondo queues
+ * of the recipient CPUs.
+ *
+ * In all cases, error or not, the CPUs in the CPU list to which the
+ * mondo has been successfully delivered will be indicated by having
+ * their entry in CPU list updated with the value 0xffff.
+ */
+#define HV_FAST_CPU_MONDO_SEND 0x42
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
+#endif
+
+/* cpu_myid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_MYID
+ * RET0: status
+ * RET1: CPU ID
+ * ERRORS: No errors defined.
+ *
+ * Return the hypervisor ID handle for the current CPU. Use by a
+ * virtual CPU to discover it's own identity.
+ */
+#define HV_FAST_CPU_MYID 0x16
+
+/* cpu_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_STATE
+ * ARG0: CPU ID
+ * RET0: status
+ * RET1: state
+ * ERRORS: ENOCPU Invalid CPU ID
+ *
+ * Retrieve the current state of the CPU with the given CPU ID.
+ */
+#define HV_FAST_CPU_STATE 0x17
+#define HV_CPU_STATE_STOPPED 0x01
+#define HV_CPU_STATE_RUNNING 0x02
+#define HV_CPU_STATE_ERROR 0x03
+
+#ifndef __ASSEMBLY__
+extern long sun4v_cpu_state(unsigned long cpuid);
+#endif
+
+/* cpu_set_rtba()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_SET_RTBA
+ * ARG0: RTBA
+ * RET0: status
+ * RET1: previous RTBA
+ * ERRORS: ENORADDR Invalid RTBA real address
+ * EBADALIGN RTBA is incorrectly aligned for a trap table
+ *
+ * Set the real trap base address of the local cpu to the given RTBA.
+ * The supplied RTBA must be aligned on a 256 byte boundary. Upon
+ * success the previous value of the RTBA is returned in RET1.
+ *
+ * Note: This service does not affect %tba
+ */
+#define HV_FAST_CPU_SET_RTBA 0x18
+
+/* cpu_set_rtba()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CPU_GET_RTBA
+ * RET0: status
+ * RET1: previous RTBA
+ * ERRORS: No possible error.
+ *
+ * Returns the current value of RTBA in RET1.
+ */
+#define HV_FAST_CPU_GET_RTBA 0x19
+
+/* MMU services.
+ *
+ * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
+ */
+#ifndef __ASSEMBLY__
+struct hv_tsb_descr {
+ unsigned short pgsz_idx;
+ unsigned short assoc;
+ unsigned int num_ttes; /* in TTEs */
+ unsigned int ctx_idx;
+ unsigned int pgsz_mask;
+ unsigned long tsb_base;
+ unsigned long resv;
+};
+#endif
+#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00
+#define HV_TSB_DESCR_ASSOC_OFFSET 0x02
+#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04
+#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08
+#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c
+#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10
+#define HV_TSB_DESCR_RESV_OFFSET 0x18
+
+/* Page size bitmask. */
+#define HV_PGSZ_MASK_8K (1 << 0)
+#define HV_PGSZ_MASK_64K (1 << 1)
+#define HV_PGSZ_MASK_512K (1 << 2)
+#define HV_PGSZ_MASK_4MB (1 << 3)
+#define HV_PGSZ_MASK_32MB (1 << 4)
+#define HV_PGSZ_MASK_256MB (1 << 5)
+#define HV_PGSZ_MASK_2GB (1 << 6)
+#define HV_PGSZ_MASK_16GB (1 << 7)
+
+/* Page size index. The value given in the TSB descriptor must correspond
+ * to the smallest page size specified in the pgsz_mask page size bitmask.
+ */
+#define HV_PGSZ_IDX_8K 0
+#define HV_PGSZ_IDX_64K 1
+#define HV_PGSZ_IDX_512K 2
+#define HV_PGSZ_IDX_4MB 3
+#define HV_PGSZ_IDX_32MB 4
+#define HV_PGSZ_IDX_256MB 5
+#define HV_PGSZ_IDX_2GB 6
+#define HV_PGSZ_IDX_16GB 7
+
+/* MMU fault status area.
+ *
+ * MMU related faults have their status and fault address information
+ * placed into a memory region made available by privileged code. Each
+ * virtual processor must make a mmu_fault_area_conf() call to tell the
+ * hypervisor where that processor's fault status should be stored.
+ *
+ * The fault status block is a multiple of 64-bytes and must be aligned
+ * on a 64-byte boundary.
+ */
+#ifndef __ASSEMBLY__
+struct hv_fault_status {
+ unsigned long i_fault_type;
+ unsigned long i_fault_addr;
+ unsigned long i_fault_ctx;
+ unsigned long i_reserved[5];
+ unsigned long d_fault_type;
+ unsigned long d_fault_addr;
+ unsigned long d_fault_ctx;
+ unsigned long d_reserved[5];
+};
+#endif
+#define HV_FAULT_I_TYPE_OFFSET 0x00
+#define HV_FAULT_I_ADDR_OFFSET 0x08
+#define HV_FAULT_I_CTX_OFFSET 0x10
+#define HV_FAULT_D_TYPE_OFFSET 0x40
+#define HV_FAULT_D_ADDR_OFFSET 0x48
+#define HV_FAULT_D_CTX_OFFSET 0x50
+
+#define HV_FAULT_TYPE_FAST_MISS 1
+#define HV_FAULT_TYPE_FAST_PROT 2
+#define HV_FAULT_TYPE_MMU_MISS 3
+#define HV_FAULT_TYPE_INV_RA 4
+#define HV_FAULT_TYPE_PRIV_VIOL 5
+#define HV_FAULT_TYPE_PROT_VIOL 6
+#define HV_FAULT_TYPE_NFO 7
+#define HV_FAULT_TYPE_NFO_SEFF 8
+#define HV_FAULT_TYPE_INV_VA 9
+#define HV_FAULT_TYPE_INV_ASI 10
+#define HV_FAULT_TYPE_NC_ATOMIC 11
+#define HV_FAULT_TYPE_PRIV_ACT 12
+#define HV_FAULT_TYPE_RESV1 13
+#define HV_FAULT_TYPE_UNALIGNED 14
+#define HV_FAULT_TYPE_INV_PGSZ 15
+/* Values 16 --> -2 are reserved. */
+#define HV_FAULT_TYPE_MULTIPLE -1
+
+/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
+ * and mmu_{map,unmap}_perm_addr().
+ */
+#define HV_MMU_DMMU 0x01
+#define HV_MMU_IMMU 0x02
+#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU)
+
+/* mmu_map_addr()
+ * TRAP: HV_MMU_MAP_ADDR_TRAP
+ * ARG0: virtual address
+ * ARG1: mmu context
+ * ARG2: TTE
+ * ARG3: flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
+ * EBADPGSZ Invalid page size value
+ * ENORADDR Invalid real address in TTE
+ *
+ * Create a non-permanent mapping using the given TTE, virtual
+ * address, and mmu context. The flags argument determines which
+ * (data, or instruction, or both) TLB the mapping gets loaded into.
+ *
+ * The behavior is undefined if the valid bit is clear in the TTE.
+ *
+ * Note: This API call is for privileged code to specify temporary translation
+ * mappings without the need to create and manage a TSB.
+ */
+
+/* mmu_unmap_addr()
+ * TRAP: HV_MMU_UNMAP_ADDR_TRAP
+ * ARG0: virtual address
+ * ARG1: mmu context
+ * ARG2: flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
+ *
+ * Demaps the given virtual address in the given mmu context on this
+ * CPU. This function is intended to be used to demap pages mapped
+ * with mmu_map_addr. This service is equivalent to invoking
+ * mmu_demap_page() with only the current CPU in the CPU list. The
+ * flags argument determines which (data, or instruction, or both) TLB
+ * the mapping gets unmapped from.
+ *
+ * Attempting to perform an unmap operation for a previously defined
+ * permanent mapping will have undefined results.
+ */
+
+/* mmu_tsb_ctx0()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_TSB_CTX0
+ * ARG0: number of TSB descriptions
+ * ARG1: TSB descriptions pointer
+ * RET0: status
+ * ERRORS: ENORADDR Invalid TSB descriptions pointer or
+ * TSB base within a descriptor
+ * EBADALIGN TSB descriptions pointer is not aligned
+ * to an 8-byte boundary, or TSB base
+ * within a descriptor is not aligned for
+ * the given TSB size
+ * EBADPGSZ Invalid page size in a TSB descriptor
+ * EBADTSB Invalid associativity or size in a TSB
+ * descriptor
+ * EINVAL Invalid number of TSB descriptions, or
+ * invalid context index in a TSB
+ * descriptor, or index page size not
+ * equal to smallest page size in page
+ * size bitmask field.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * context zero. The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: The maximum number of TSBs available to a virtual CPU is given by the
+ * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
+ * machine description.
+ */
+#define HV_FAST_MMU_TSB_CTX0 0x20
+
+/* mmu_tsb_ctxnon0()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_TSB_CTXNON0
+ * ARG0: number of TSB descriptions
+ * ARG1: TSB descriptions pointer
+ * RET0: status
+ * ERRORS: Same as for mmu_tsb_ctx0() above.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * non-zero contexts. The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: A maximum of 16 TSBs may be specified in the TSB description list.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0 0x21
+
+/* mmu_demap_page()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_DEMAP_PAGE
+ * ARG0: reserved, must be zero
+ * ARG1: reserved, must be zero
+ * ARG2: virtual address
+ * ARG3: mmu context
+ * ARG4: flags (HV_MMU_{IMMU,DMMU})
+ * RET0: status
+ * ERRORS: EINVAL Invalid virutal address, context, or
+ * flags value
+ * ENOTSUPPORTED ARG0 or ARG1 is non-zero
+ *
+ * Demaps any page mapping of the given virtual address in the given
+ * mmu context for the current virtual CPU. Any virtually tagged
+ * caches are guaranteed to be kept consistent. The flags argument
+ * determines which TLB (instruction, or data, or both) participate in
+ * the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_PAGE 0x22
+
+/* mmu_demap_ctx()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_DEMAP_CTX
+ * ARG0: reserved, must be zero
+ * ARG1: reserved, must be zero
+ * ARG2: mmu context
+ * ARG3: flags (HV_MMU_{IMMU,DMMU})
+ * RET0: status
+ * ERRORS: EINVAL Invalid context or flags value
+ * ENOTSUPPORTED ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the given context for the current virtual CPU. Any virtual
+ * tagged caches are guaranteed to be kept consistent. The flags
+ * argument determines which TLB (instruction, or data, or both)
+ * participate in the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_CTX 0x23
+
+/* mmu_demap_all()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_DEMAP_ALL
+ * ARG0: reserved, must be zero
+ * ARG1: reserved, must be zero
+ * ARG2: flags (HV_MMU_{IMMU,DMMU})
+ * RET0: status
+ * ERRORS: EINVAL Invalid flags value
+ * ENOTSUPPORTED ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the current virtual CPU. Any virtual tagged caches are
+ * guaranteed to be kept consistent. The flags argument determines
+ * which TLB (instruction, or data, or both) participate in the
+ * operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_ALL 0x24
+
+/* mmu_map_perm_addr()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
+ * ARG0: virtual address
+ * ARG1: reserved, must be zero
+ * ARG2: TTE
+ * ARG3: flags (HV_MMU_{IMMU,DMMU})
+ * RET0: status
+ * ERRORS: EINVAL Invalid virutal address or flags value
+ * EBADPGSZ Invalid page size value
+ * ENORADDR Invalid real address in TTE
+ * ETOOMANY Too many mappings (max of 8 reached)
+ *
+ * Create a permanent mapping using the given TTE and virtual address
+ * for context 0 on the calling virtual CPU. A maximum of 8 such
+ * permanent mappings may be specified by privileged code. Mappings
+ * may be removed with mmu_unmap_perm_addr().
+ *
+ * The behavior is undefined if a TTE with the valid bit clear is given.
+ *
+ * Note: This call is used to specify address space mappings for which
+ * privileged code does not expect to receive misses. For example,
+ * this mechanism can be used to map kernel nucleus code and data.
+ */
+#define HV_FAST_MMU_MAP_PERM_ADDR 0x25
+
+/* mmu_fault_area_conf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
+ * ARG0: real address
+ * RET0: status
+ * RET1: previous mmu fault area real address
+ * ERRORS: ENORADDR Invalid real address
+ * EBADALIGN Invalid alignment for fault area
+ *
+ * Configure the MMU fault status area for the calling CPU. A 64-byte
+ * aligned real address specifies where MMU fault status information
+ * is placed. The return value is the previously specified area, or 0
+ * for the first invocation. Specifying a fault area at real address
+ * 0 is not allowed.
+ */
+#define HV_FAST_MMU_FAULT_AREA_CONF 0x26
+
+/* mmu_enable()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_ENABLE
+ * ARG0: enable flag
+ * ARG1: return target address
+ * RET0: status
+ * ERRORS: ENORADDR Invalid real address when disabling
+ * translation.
+ * EBADALIGN The return target address is not
+ * aligned to an instruction.
+ * EINVAL The enable flag request the current
+ * operating mode (e.g. disable if already
+ * disabled)
+ *
+ * Enable or disable virtual address translation for the calling CPU
+ * within the virtual machine domain. If the enable flag is zero,
+ * translation is disabled, any non-zero value will enable
+ * translation.
+ *
+ * When this function returns, the newly selected translation mode
+ * will be active. If the mmu is being enabled, then the return
+ * target address is a virtual address else it is a real address.
+ *
+ * Upon successful completion, control will be returned to the given
+ * return target address (ie. the cpu will jump to that address). On
+ * failure, the previous mmu mode remains and the trap simply returns
+ * as normal with the appropriate error code in RET0.
+ */
+#define HV_FAST_MMU_ENABLE 0x27
+
+/* mmu_unmap_perm_addr()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR
+ * ARG0: virtual address
+ * ARG1: reserved, must be zero
+ * ARG2: flags (HV_MMU_{IMMU,DMMU})
+ * RET0: status
+ * ERRORS: EINVAL Invalid virutal address or flags value
+ * ENOMAP Specified mapping was not found
+ *
+ * Demaps any permanent page mapping (established via
+ * mmu_map_perm_addr()) at the given virtual address for context 0 on
+ * the current virtual CPU. Any virtual tagged caches are guaranteed
+ * to be kept consistent.
+ */
+#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28
+
+/* mmu_tsb_ctx0_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO
+ * ARG0: max TSBs
+ * ARG1: buffer pointer
+ * RET0: status
+ * RET1: number of TSBs
+ * ERRORS: EINVAL Supplied buffer is too small
+ * EBADALIGN The buffer pointer is badly aligned
+ * ENORADDR Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
+ * into the provided buffer. The size of the buffer is given in ARG1
+ * in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured. If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTX0_INFO 0x29
+
+/* mmu_tsb_ctxnon0_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO
+ * ARG0: max TSBs
+ * ARG1: buffer pointer
+ * RET0: status
+ * RET1: number of TSBs
+ * ERRORS: EINVAL Supplied buffer is too small
+ * EBADALIGN The buffer pointer is badly aligned
+ * ENORADDR Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by
+ * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer
+ * is given in ARG1 in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured. If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a
+
+/* mmu_fault_area_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO
+ * RET0: status
+ * RET1: fault area real address
+ * ERRORS: No errors defined.
+ *
+ * Return the currently defined MMU fault status area for the current
+ * CPU. The real address of the fault status area is returned in
+ * RET1, or 0 is returned in RET1 if no fault status area is defined.
+ *
+ * Note: mmu_fault_area_conf() may be called with the return value (RET1)
+ * from this service if there is a need to save and restore the fault
+ * area for a cpu.
+ */
+#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b
+
+/* Cache and Memory services. */
+
+/* mem_scrub()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MEM_SCRUB
+ * ARG0: real address
+ * ARG1: length
+ * RET0: status
+ * RET1: length scrubbed
+ * ERRORS: ENORADDR Invalid real address
+ * EBADALIGN Start address or length are not correctly
+ * aligned
+ * EINVAL Length is zero
+ *
+ * Zero the memory contents in the range real address to real address
+ * plus length minus 1. Also, valid ECC will be generated for that
+ * memory address range. Scrubbing is started at the given real
+ * address, but may not scrub the entire given length. The actual
+ * length scrubbed will be returned in RET1.
+ *
+ * The real address and length must be aligned on an 8K boundary, or
+ * contain the start address and length from a sun4v error report.
+ *
+ * Note: There are two uses for this function. The first use is to block clear
+ * and initialize memory and the second is to scrub an u ncorrectable
+ * error reported via a resumable or non-resumable trap. The second
+ * use requires the arguments to be equal to the real address and length
+ * provided in a sun4v memory error report.
+ */
+#define HV_FAST_MEM_SCRUB 0x31
+
+/* mem_sync()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MEM_SYNC
+ * ARG0: real address
+ * ARG1: length
+ * RET0: status
+ * RET1: length synced
+ * ERRORS: ENORADDR Invalid real address
+ * EBADALIGN Start address or length are not correctly
+ * aligned
+ * EINVAL Length is zero
+ *
+ * Force the next access within the real address to real address plus
+ * length minus 1 to be fetches from main system memory. Less than
+ * the given length may be synced, the actual amount synced is
+ * returned in RET1. The real address and length must be aligned on
+ * an 8K boundary.
+ */
+#define HV_FAST_MEM_SYNC 0x32
+
+/* Time of day services.
+ *
+ * The hypervisor maintains the time of day on a per-domain basis.
+ * Changing the time of day in one domain does not affect the time of
+ * day on any other domain.
+ *
+ * Time is described by a single unsigned 64-bit word which is the
+ * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
+ * 1970).
+ */
+
+/* tod_get()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TOD_GET
+ * RET0: status
+ * RET1: TOD
+ * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
+ * ENOTSUPPORTED If TOD not supported on this platform
+ *
+ * Return the current time of day. May block if TOD access is
+ * temporarily not possible.
+ */
+#define HV_FAST_TOD_GET 0x50
+
+/* tod_set()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TOD_SET
+ * ARG0: TOD
+ * RET0: status
+ * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
+ * ENOTSUPPORTED If TOD not supported on this platform
+ *
+ * The current time of day is set to the value specified in ARG0. May
+ * block if TOD access is temporarily not possible.
+ */
+#define HV_FAST_TOD_SET 0x51
+
+/* Console services */
+
+/* con_getchar()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CONS_GETCHAR
+ * RET0: status
+ * RET1: character
+ * ERRORS: EWOULDBLOCK No character available.
+ *
+ * Returns a character from the console device. If no character is
+ * available then an EWOULDBLOCK error is returned. If a character is
+ * available, then the returned status is EOK and the character value
+ * is in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit value -2.
+ */
+#define HV_FAST_CONS_GETCHAR 0x60
+
+/* con_putchar()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_CONS_PUTCHAR
+ * ARG0: character
+ * RET0: status
+ * ERRORS: EINVAL Illegal character
+ * EWOULDBLOCK Output buffer currently full, would block
+ *
+ * Send a character to the console device. Only character values
+ * between 0 and 255 may be used. Values outside this range are
+ * invalid except for the 64-bit value -1 which is used to send a
+ * virtual BREAK.
+ */
+#define HV_FAST_CONS_PUTCHAR 0x61
+
+/* Trap trace services.
+ *
+ * The hypervisor provides a trap tracing capability for privileged
+ * code running on each virtual CPU. Privileged code provides a
+ * round-robin trap trace queue within which the hypervisor writes
+ * 64-byte entries detailing hyperprivileged traps taken n behalf of
+ * privileged code. This is provided as a debugging capability for
+ * privileged code.
+ *
+ * The trap trace control structure is 64-bytes long and placed at the
+ * start (offset 0) of the trap trace buffer, and is described as
+ * follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_control {
+ unsigned long head_offset;
+ unsigned long tail_offset;
+ unsigned long __reserved[0x30 / sizeof(unsigned long)];
+};
+#endif
+#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00
+#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08
+
+/* The head offset is the offset of the most recently completed entry
+ * in the trap-trace buffer. The tail offset is the offset of the
+ * next entry to be written. The control structure is owned and
+ * modified by the hypervisor. A guest may not modify the control
+ * structure contents. Attempts to do so will result in undefined
+ * behavior for the guest.
+ *
+ * Each trap trace buffer entry is layed out as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_entry {
+ unsigned char type; /* Hypervisor or guest entry? */
+ unsigned char hpstate; /* Hyper-privileged state */
+ unsigned char tl; /* Trap level */
+ unsigned char gl; /* Global register level */
+ unsigned short tt; /* Trap type */
+ unsigned short tag; /* Extended trap identifier */
+ unsigned long tstate; /* Trap state */
+ unsigned long tick; /* Tick */
+ unsigned long tpc; /* Trap PC */
+ unsigned long f1; /* Entry specific */
+ unsigned long f2; /* Entry specific */
+ unsigned long f3; /* Entry specific */
+ unsigned long f4; /* Entry specific */
+};
+#endif
+#define HV_TRAP_TRACE_ENTRY_TYPE 0x00
+#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01
+#define HV_TRAP_TRACE_ENTRY_TL 0x02
+#define HV_TRAP_TRACE_ENTRY_GL 0x03
+#define HV_TRAP_TRACE_ENTRY_TT 0x04
+#define HV_TRAP_TRACE_ENTRY_TAG 0x06
+#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08
+#define HV_TRAP_TRACE_ENTRY_TICK 0x10
+#define HV_TRAP_TRACE_ENTRY_TPC 0x18
+#define HV_TRAP_TRACE_ENTRY_F1 0x20
+#define HV_TRAP_TRACE_ENTRY_F2 0x28
+#define HV_TRAP_TRACE_ENTRY_F3 0x30
+#define HV_TRAP_TRACE_ENTRY_F4 0x38
+
+/* The type field is encoded as follows. */
+#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */
+#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */
+#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */
+
+/* ttrace_buf_conf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TTRACE_BUF_CONF
+ * ARG0: real address
+ * ARG1: number of entries
+ * RET0: status
+ * RET1: number of entries
+ * ERRORS: ENORADDR Invalid real address
+ * EINVAL Size is too small
+ * EBADALIGN Real address not aligned on 64-byte boundary
+ *
+ * Requests hypervisor trap tracing and declares a virtual CPU's trap
+ * trace buffer to the hypervisor. The real address supplies the real
+ * base address of the trap trace queue and must be 64-byte aligned.
+ * Specifying a value of 0 for the number of entries disables trap
+ * tracing for the calling virtual CPU. The buffer allocated must be
+ * sized for a power of two number of 64-byte trap trace entries plus
+ * an initial 64-byte control structure.
+ *
+ * This may be invoked any number of times so that a virtual CPU may
+ * relocate a trap trace buffer or create "snapshots" of information.
+ *
+ * If the real address is illegal or badly aligned, then trap tracing
+ * is disabled and an error is returned.
+ *
+ * Upon failure with EINVAL, this service call returns in RET1 the
+ * minimum number of buffer entries required. Upon other failures
+ * RET1 is undefined.
+ */
+#define HV_FAST_TTRACE_BUF_CONF 0x90
+
+/* ttrace_buf_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TTRACE_BUF_INFO
+ * RET0: status
+ * RET1: real address
+ * RET2: size
+ * ERRORS: None defined.
+ *
+ * Returns the size and location of the previously declared trap-trace
+ * buffer. In the event that no buffer was previously defined, or the
+ * buffer is disabled, this call will return a size of zero bytes.
+ */
+#define HV_FAST_TTRACE_BUF_INFO 0x91
+
+/* ttrace_enable()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TTRACE_ENABLE
+ * ARG0: enable
+ * RET0: status
+ * RET1: previous enable state
+ * ERRORS: EINVAL No trap trace buffer currently defined
+ *
+ * Enable or disable trap tracing, and return the previous enabled
+ * state in RET1. Future systems may define various flags for the
+ * enable argument (ARG0), for the moment a guest should pass
+ * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
+ * tracing - which will ensure future compatability.
+ */
+#define HV_FAST_TTRACE_ENABLE 0x92
+
+/* ttrace_freeze()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_TTRACE_FREEZE
+ * ARG0: freeze
+ * RET0: status
+ * RET1: previous freeze state
+ * ERRORS: EINVAL No trap trace buffer currently defined
+ *
+ * Freeze or unfreeze trap tracing, returning the previous freeze
+ * state in RET1. A guest should pass a non-zero value to freeze and
+ * a zero value to unfreeze all tracing. The returned previous state
+ * is 0 for not frozen and 1 for frozen.
+ */
+#define HV_FAST_TTRACE_FREEZE 0x93
+
+/* ttrace_addentry()
+ * TRAP: HV_TTRACE_ADDENTRY_TRAP
+ * ARG0: tag (16-bits)
+ * ARG1: data word 0
+ * ARG2: data word 1
+ * ARG3: data word 2
+ * ARG4: data word 3
+ * RET0: status
+ * ERRORS: EINVAL No trap trace buffer currently defined
+ *
+ * Add an entry to the trap trace buffer. Upon return only ARG0/RET0
+ * is modified - none of the other registers holding arguments are
+ * volatile across this hypervisor service.
+ */
+
+/* Core dump services.
+ *
+ * Since the hypervisor viraulizes and thus obscures a lot of the
+ * physical machine layout and state, traditional OS crash dumps can
+ * be difficult to diagnose especially when the problem is a
+ * configuration error of some sort.
+ *
+ * The dump services provide an opaque buffer into which the
+ * hypervisor can place it's internal state in order to assist in
+ * debugging such situations. The contents are opaque and extremely
+ * platform and hypervisor implementation specific. The guest, during
+ * a core dump, requests that the hypervisor update any information in
+ * the dump buffer in preparation to being dumped as part of the
+ * domain's memory image.
+ */
+
+/* dump_buf_update()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_DUMP_BUF_UPDATE
+ * ARG0: real address
+ * ARG1: size
+ * RET0: status
+ * RET1: required size of dump buffer
+ * ERRORS: ENORADDR Invalid real address
+ * EBADALIGN Real address is not aligned on a 64-byte
+ * boundary
+ * EINVAL Size is non-zero but less than minimum size
+ * required
+ * ENOTSUPPORTED Operation not supported on current logical
+ * domain
+ *
+ * Declare a domain dump buffer to the hypervisor. The real address
+ * provided for the domain dump buffer must be 64-byte aligned. The
+ * size specifies the size of the dump buffer and may be larger than
+ * the minimum size specified in the machine description. The
+ * hypervisor will fill the dump buffer with opaque data.
+ *
+ * Note: A guest may elect to include dump buffer contents as part of a crash
+ * dump to assist with debugging. This function may be called any number
+ * of times so that a guest may relocate a dump buffer, or create
+ * "snapshots" of any dump-buffer information. Each call to
+ * dump_buf_update() atomically declares the new dump buffer to the
+ * hypervisor.
+ *
+ * A specified size of 0 unconfigures the dump buffer. If the real
+ * address is illegal or badly aligned, then any currently active dump
+ * buffer is disabled and an error is returned.
+ *
+ * In the event that the call fails with EINVAL, RET1 contains the
+ * minimum size requires by the hypervisor for a valid dump buffer.
+ */
+#define HV_FAST_DUMP_BUF_UPDATE 0x94
+
+/* dump_buf_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_DUMP_BUF_INFO
+ * RET0: status
+ * RET1: real address of current dump buffer
+ * RET2: size of current dump buffer
+ * ERRORS: No errors defined.
+ *
+ * Return the currently configures dump buffer description. A
+ * returned size of 0 bytes indicates an undefined dump buffer. In
+ * this case the return address in RET1 is undefined.
+ */
+#define HV_FAST_DUMP_BUF_INFO 0x95
+
+/* Device interrupt services.
+ *
+ * Device interrupts are allocated to system bus bridges by the hypervisor,
+ * and described to OBP in the machine description. OBP then describes
+ * these interrupts to the OS via properties in the device tree.
+ *
+ * Terminology:
+ *
+ * cpuid Unique opaque value which represents a target cpu.
+ *
+ * devhandle Device handle. It uniquely identifies a device, and
+ * consistes of the lower 28-bits of the hi-cell of the
+ * first entry of the device's "reg" property in the
+ * OBP device tree.
+ *
+ * devino Device interrupt number. Specifies the relative
+ * interrupt number within the device. The unique
+ * combination of devhandle and devino are used to
+ * identify a specific device interrupt.
+ *
+ * Note: The devino value is the same as the values in the
+ * "interrupts" property or "interrupt-map" property
+ * in the OBP device tree for that device.
+ *
+ * sysino System interrupt number. A 64-bit unsigned interger
+ * representing a unique interrupt within a virtual
+ * machine.
+ *
+ * intr_state A flag representing the interrupt state for a given
+ * sysino. The state values are defined below.
+ *
+ * intr_enabled A flag representing the 'enabled' state for a given
+ * sysino. The enable values are defined below.
+ */
+
+#define HV_INTR_STATE_IDLE 0 /* Nothing pending */
+#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */
+#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */
+
+#define HV_INTR_DISABLED 0 /* sysino not enabled */
+#define HV_INTR_ENABLED 1 /* sysino enabled */
+
+/* intr_devino_to_sysino()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO
+ * ARG0: devhandle
+ * ARG1: devino
+ * RET0: status
+ * RET1: sysino
+ * ERRORS: EINVAL Invalid devhandle/devino
+ *
+ * Converts a device specific interrupt number of the given
+ * devhandle/devino into a system specific ino (sysino).
+ */
+#define HV_FAST_INTR_DEVINO2SYSINO 0xa0
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
+ unsigned long devino);
+#endif
+
+/* intr_getenabled()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_GETENABLED
+ * ARG0: sysino
+ * RET0: status
+ * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * ERRORS: EINVAL Invalid sysino
+ *
+ * Returns interrupt enabled state in RET1 for the interrupt defined
+ * by the given sysino.
+ */
+#define HV_FAST_INTR_GETENABLED 0xa1
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
+#endif
+
+/* intr_setenabled()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_SETENABLED
+ * ARG0: sysino
+ * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * RET0: status
+ * ERRORS: EINVAL Invalid sysino or intr_enabled value
+ *
+ * Set the 'enabled' state of the interrupt sysino.
+ */
+#define HV_FAST_INTR_SETENABLED 0xa2
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
+#endif
+
+/* intr_getstate()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_GETSTATE
+ * ARG0: sysino
+ * RET0: status
+ * RET1: intr_state (HV_INTR_STATE_*)
+ * ERRORS: EINVAL Invalid sysino
+ *
+ * Returns current state of the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_GETSTATE 0xa3
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getstate(unsigned long sysino);
+#endif
+
+/* intr_setstate()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_SETSTATE
+ * ARG0: sysino
+ * ARG1: intr_state (HV_INTR_STATE_*)
+ * RET0: status
+ * ERRORS: EINVAL Invalid sysino or intr_state value
+ *
+ * Sets the current state of the interrupt described by the given sysino
+ * value.
+ *
+ * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
+ * interrupt for sysino.
+ */
+#define HV_FAST_INTR_SETSTATE 0xa4
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
+#endif
+
+/* intr_gettarget()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_GETTARGET
+ * ARG0: sysino
+ * RET0: status
+ * RET1: cpuid
+ * ERRORS: EINVAL Invalid sysino
+ *
+ * Returns CPU that is the current target of the interrupt defined by
+ * the given sysino. The CPU value returned is undefined if the target
+ * has not been set via intr_settarget().
+ */
+#define HV_FAST_INTR_GETTARGET 0xa5
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
+#endif
+
+/* intr_settarget()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_INTR_SETTARGET
+ * ARG0: sysino
+ * ARG1: cpuid
+ * RET0: status
+ * ERRORS: EINVAL Invalid sysino
+ * ENOCPU Invalid cpuid
+ *
+ * Set the target CPU for the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_SETTARGET 0xa6
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
+#endif
+
+/* PCI IO services.
+ *
+ * See the terminology descriptions in the device interrupt services
+ * section above as those apply here too. Here are terminology
+ * definitions specific to these PCI IO services:
+ *
+ * tsbnum TSB number. Indentifies which io-tsb is used.
+ * For this version of the specification, tsbnum
+ * must be zero.
+ *
+ * tsbindex TSB index. Identifies which entry in the TSB
+ * is used. The first entry is zero.
+ *
+ * tsbid A 64-bit aligned data structure which contains
+ * a tsbnum and a tsbindex. Bits 63:32 contain the
+ * tsbnum and bits 31:00 contain the tsbindex.
+ *
+ * Use the HV_PCI_TSBID() macro to construct such
+ * values.
+ *
+ * io_attributes IO attributes for IOMMU mappings. One of more
+ * of the attritbute bits are stores in a 64-bit
+ * value. The values are defined below.
+ *
+ * r_addr 64-bit real address
+ *
+ * pci_device PCI device address. A PCI device address identifies
+ * a specific device on a specific PCI bus segment.
+ * A PCI device address ia a 32-bit unsigned integer
+ * with the following format:
+ *
+ * 00000000.bbbbbbbb.dddddfff.00000000
+ *
+ * Use the HV_PCI_DEVICE_BUILD() macro to construct
+ * such values.
+ *
+ * pci_config_offset
+ * PCI configureation space offset. For conventional
+ * PCI a value between 0 and 255. For extended
+ * configuration space, a value between 0 and 4095.
+ *
+ * Note: For PCI configuration space accesses, the offset
+ * must be aligned to the access size.
+ *
+ * error_flag A return value which specifies if the action succeeded
+ * or failed. 0 means no error, non-0 means some error
+ * occurred while performing the service.
+ *
+ * io_sync_direction
+ * Direction definition for pci_dma_sync(), defined
+ * below in HV_PCI_SYNC_*.
+ *
+ * io_page_list A list of io_page_addresses, an io_page_address is
+ * a real address.
+ *
+ * io_page_list_p A pointer to an io_page_list.
+ *
+ * "size based byte swap" - Some functions do size based byte swapping
+ * which allows sw to access pointers and
+ * counters in native form when the processor
+ * operates in a different endianness than the
+ * IO bus. Size-based byte swapping converts a
+ * multi-byte field between big-endian and
+ * little-endian format.
+ */
+
+#define HV_PCI_MAP_ATTR_READ 0x01
+#define HV_PCI_MAP_ATTR_WRITE 0x02
+
+#define HV_PCI_DEVICE_BUILD(b,d,f) \
+ ((((b) & 0xff) << 16) | \
+ (((d) & 0x1f) << 11) | \
+ (((f) & 0x07) << 8))
+
+#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
+ ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
+
+#define HV_PCI_SYNC_FOR_DEVICE 0x01
+#define HV_PCI_SYNC_FOR_CPU 0x02
+
+/* pci_iommu_map()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_IOMMU_MAP
+ * ARG0: devhandle
+ * ARG1: tsbid
+ * ARG2: #ttes
+ * ARG3: io_attributes
+ * ARG4: io_page_list_p
+ * RET0: status
+ * RET1: #ttes mapped
+ * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes
+ * EBADALIGN Improperly aligned real address
+ * ENORADDR Invalid real address
+ *
+ * Create IOMMU mappings in the sun4v device defined by the given
+ * devhandle. The mappings are created in the TSB defined by the
+ * tsbnum component of the given tsbid. The first mapping is created
+ * in the TSB i ndex defined by the tsbindex component of the given tsbid.
+ * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
+ * the second at tsbnum, tsbindex + 1, etc.
+ *
+ * All mappings are created with the attributes defined by the io_attributes
+ * argument. The page mapping addresses are described in the io_page_list
+ * defined by the given io_page_list_p, which is a pointer to the io_page_list.
+ * The first entry in the io_page_list is the address for the first iotte, the
+ * 2nd for the 2nd iotte, and so on.
+ *
+ * Each io_page_address in the io_page_list must be appropriately aligned.
+ * #ttes must be greater than zero. For this version of the spec, the tsbnum
+ * component of the given tsbid must be zero.
+ *
+ * Returns the actual number of mappings creates, which may be less than
+ * or equal to the argument #ttes. If the function returns a value which
+ * is less than the #ttes, the caller may continus to call the function with
+ * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
+ * mapped.
+ *
+ * Note: This function does not imply an iotte cache flush. The guest must
+ * demap an entry before re-mapping it.
+ */
+#define HV_FAST_PCI_IOMMU_MAP 0xb0
+
+/* pci_iommu_demap()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP
+ * ARG0: devhandle
+ * ARG1: tsbid
+ * ARG2: #ttes
+ * RET0: status
+ * RET1: #ttes demapped
+ * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
+ *
+ * Demap and flush IOMMU mappings in the device defined by the given
+ * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum
+ * component of the given tsbid, starting at the TSB index defined by the
+ * tsbindex component of the given tsbid.
+ *
+ * For this version of the spec, the tsbnum of the given tsbid must be zero.
+ * #ttes must be greater than zero.
+ *
+ * Returns the actual number of ttes demapped, which may be less than or equal
+ * to the argument #ttes. If #ttes demapped is less than #ttes, the caller
+ * may continue to call this function with updated tsbid and #ttes arguments
+ * until all pages are demapped.
+ *
+ * Note: Entries do not have to be mapped to be demapped. A demap of an
+ * unmapped page will flush the entry from the tte cache.
+ */
+#define HV_FAST_PCI_IOMMU_DEMAP 0xb1
+
+/* pci_iommu_getmap()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP
+ * ARG0: devhandle
+ * ARG1: tsbid
+ * RET0: status
+ * RET1: io_attributes
+ * RET2: real address
+ * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
+ * ENOMAP Mapping is not valid, no translation exists
+ *
+ * Read and return the mapping in the device described by the given devhandle
+ * and tsbid. If successful, the io_attributes shall be returned in RET1
+ * and the page address of the mapping shall be returned in RET2.
+ *
+ * For this version of the spec, the tsbnum component of the given tsbid
+ * must be zero.
+ */
+#define HV_FAST_PCI_IOMMU_GETMAP 0xb2
+
+/* pci_iommu_getbypass()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS
+ * ARG0: devhandle
+ * ARG1: real address
+ * ARG2: io_attributes
+ * RET0: status
+ * RET1: io_addr
+ * ERRORS: EINVAL Invalid devhandle/io_attributes
+ * ENORADDR Invalid real address
+ * ENOTSUPPORTED Function not supported in this implementation.
+ *
+ * Create a "special" mapping in the device described by the given devhandle,
+ * for the given real address and attributes. Return the IO address in RET1
+ * if successful.
+ */
+#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3
+
+/* pci_config_get()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_CONFIG_GET
+ * ARG0: devhandle
+ * ARG1: pci_device
+ * ARG2: pci_config_offset
+ * ARG3: size
+ * RET0: status
+ * RET1: error_flag
+ * RET2: data
+ * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
+ * EBADALIGN pci_config_offset not size aligned
+ * ENOACCESS Access to this offset is not permitted
+ *
+ * Read PCI configuration space for the adapter described by the given
+ * devhandle. Read size (1, 2, or 4) bytes of data from the given
+ * pci_device, at pci_config_offset from the beginning of the device's
+ * configuration space. If there was no error, RET1 is set to zero and
+ * RET2 is set to the data read. Insignificant bits in RET2 are not
+ * guarenteed to have any specific value and therefore must be ignored.
+ *
+ * The data returned in RET2 is size based byte swapped.
+ *
+ * If an error occurs during the read, set RET1 to a non-zero value. The
+ * given pci_config_offset must be 'size' aligned.
+ */
+#define HV_FAST_PCI_CONFIG_GET 0xb4
+
+/* pci_config_put()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_CONFIG_PUT
+ * ARG0: devhandle
+ * ARG1: pci_device
+ * ARG2: pci_config_offset
+ * ARG3: size
+ * ARG4: data
+ * RET0: status
+ * RET1: error_flag
+ * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
+ * EBADALIGN pci_config_offset not size aligned
+ * ENOACCESS Access to this offset is not permitted
+ *
+ * Write PCI configuration space for the adapter described by the given
+ * devhandle. Write size (1, 2, or 4) bytes of data in a single operation,
+ * at pci_config_offset from the beginning of the device's configuration
+ * space. The data argument contains the data to be written to configuration
+ * space. Prior to writing, the data is size based byte swapped.
+ *
+ * If an error occurs during the write access, do not generate an error
+ * report, do set RET1 to a non-zero value. Otherwise RET1 is zero.
+ * The given pci_config_offset must be 'size' aligned.
+ *
+ * This function is permitted to read from offset zero in the configuration
+ * space described by the given pci_device if necessary to ensure that the
+ * write access to config space completes.
+ */
+#define HV_FAST_PCI_CONFIG_PUT 0xb5
+
+/* pci_peek()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_PEEK
+ * ARG0: devhandle
+ * ARG1: real address
+ * ARG2: size
+ * RET0: status
+ * RET1: error_flag
+ * RET2: data
+ * ERRORS: EINVAL Invalid devhandle or size
+ * EBADALIGN Improperly aligned real address
+ * ENORADDR Bad real address
+ * ENOACCESS Guest access prohibited
+ *
+ * Attempt to read the IO address given by the given devhandle, real address,
+ * and size. Size must be 1, 2, 4, or 8. The read is performed as a single
+ * access operation using the given size. If an error occurs when reading
+ * from the given location, do not generate an error report, but return a
+ * non-zero value in RET1. If the read was successful, return zero in RET1
+ * and return the actual data read in RET2. The data returned is size based
+ * byte swapped.
+ *
+ * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * and therefore must be ignored. If RET1 is returned as non-zero, the data
+ * value is not guarenteed to have any specific value and should be ignored.
+ *
+ * The caller must have permission to read from the given devhandle, real
+ * address, which must be an IO address. The argument real address must be a
+ * size aligned address.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_PEEK 0xb6
+
+/* pci_poke()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_POKE
+ * ARG0: devhandle
+ * ARG1: real address
+ * ARG2: size
+ * ARG3: data
+ * ARG4: pci_device
+ * RET0: status
+ * RET1: error_flag
+ * ERRORS: EINVAL Invalid devhandle, size, or pci_device
+ * EBADALIGN Improperly aligned real address
+ * ENORADDR Bad real address
+ * ENOACCESS Guest access prohibited
+ * ENOTSUPPORTED Function is not supported by implementation
+ *
+ * Attempt to write data to the IO address given by the given devhandle,
+ * real address, and size. Size must be 1, 2, 4, or 8. The write is
+ * performed as a single access operation using the given size. Prior to
+ * writing the data is size based swapped.
+ *
+ * If an error occurs when writing to the given location, do not generate an
+ * error report, but return a non-zero value in RET1. If the write was
+ * successful, return zero in RET1.
+ *
+ * pci_device describes the configuration address of the device being
+ * written to. The implementation may safely read from offset 0 with
+ * the configuration space of the device described by devhandle and
+ * pci_device in order to guarantee that the write portion of the operation
+ * completes
+ *
+ * Any error that occurs due to the read shall be reported using the normal
+ * error reporting mechanisms .. the read error is not suppressed.
+ *
+ * The caller must have permission to write to the given devhandle, real
+ * address, which must be an IO address. The argument real address must be a
+ * size aligned address. The caller must have permission to read from
+ * the given devhandle, pci_device cofiguration space offset 0.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_POKE 0xb7
+
+/* pci_dma_sync()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_DMA_SYNC
+ * ARG0: devhandle
+ * ARG1: real address
+ * ARG2: size
+ * ARG3: io_sync_direction
+ * RET0: status
+ * RET1: #synced
+ * ERRORS: EINVAL Invalid devhandle or io_sync_direction
+ * ENORADDR Bad real address
+ *
+ * Synchronize a memory region described by the given real address and size,
+ * for the device defined by the given devhandle using the direction(s)
+ * defined by the given io_sync_direction. The argument size is the size of
+ * the memory region in bytes.
+ *
+ * Return the actual number of bytes synchronized in the return value #synced,
+ * which may be less than or equal to the argument size. If the return
+ * value #synced is less than size, the caller must continue to call this
+ * function with updated real address and size arguments until the entire
+ * memory region is synchronized.
+ */
+#define HV_FAST_PCI_DMA_SYNC 0xb8
+
+/* PCI MSI services. */
+
+#define HV_MSITYPE_MSI32 0x00
+#define HV_MSITYPE_MSI64 0x01
+
+#define HV_MSIQSTATE_IDLE 0x00
+#define HV_MSIQSTATE_ERROR 0x01
+
+#define HV_MSIQ_INVALID 0x00
+#define HV_MSIQ_VALID 0x01
+
+#define HV_MSISTATE_IDLE 0x00
+#define HV_MSISTATE_DELIVERED 0x01
+
+#define HV_MSIVALID_INVALID 0x00
+#define HV_MSIVALID_VALID 0x01
+
+#define HV_PCIE_MSGTYPE_PME_MSG 0x18
+#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b
+#define HV_PCIE_MSGTYPE_CORR_MSG 0x30
+#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31
+#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33
+
+#define HV_MSG_INVALID 0x00
+#define HV_MSG_VALID 0x01
+
+/* pci_msiq_conf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_CONF
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * ARG2: real address
+ * ARG3: number of entries
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle, msiqid or nentries
+ * EBADALIGN Improperly aligned real address
+ * ENORADDR Bad real address
+ *
+ * Configure the MSI queue given by the devhandle and msiqid arguments,
+ * and to be placed at the given real address and be of the given
+ * number of entries. The real address must be aligned exactly to match
+ * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ
+ * Head and Tail are initialized so that the MSI-EQ is 'empty'.
+ *
+ * Implementation Note: Certain implementations have fixed sized queues. In
+ * that case, number of entries must contain the correct
+ * value.
+ */
+#define HV_FAST_PCI_MSIQ_CONF 0xc0
+
+/* pci_msiq_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_INFO
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * RET0: status
+ * RET1: real address
+ * RET2: number of entries
+ * ERRORS: EINVAL Invalid devhandle or msiqid
+ *
+ * Return the configuration information for the MSI queue described
+ * by the given devhandle and msiqid. The base address of the queue
+ * is returned in ARG1 and the number of entries is returned in ARG2.
+ * If the queue is unconfigured, the real address is undefined and the
+ * number of entries will be returned as zero.
+ */
+#define HV_FAST_PCI_MSIQ_INFO 0xc1
+
+/* pci_msiq_getvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * RET0: status
+ * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * ERRORS: EINVAL Invalid devhandle or msiqid
+ *
+ * Get the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETVALID 0xc2
+
+/* pci_msiq_setvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid
+ * value or MSI EQ is uninitialized
+ *
+ * Set the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETVALID 0xc3
+
+/* pci_msiq_getstate()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * RET0: status
+ * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * ERRORS: EINVAL Invalid devhandle or msiqid
+ *
+ * Get the state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4
+
+/* pci_msiq_getvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate
+ * value or MSI EQ is uninitialized
+ *
+ * Set the state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5
+
+/* pci_msiq_gethead()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * RET0: status
+ * RET1: msiqhead
+ * ERRORS: EINVAL Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6
+
+/* pci_msiq_sethead()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * ARG2: msiqhead
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead,
+ * or MSI EQ is uninitialized
+ *
+ * Set the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7
+
+/* pci_msiq_gettail()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL
+ * ARG0: devhandle
+ * ARG1: msiqid
+ * RET0: status
+ * RET1: msiqtail
+ * ERRORS: EINVAL Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue tail for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8
+
+/* pci_msi_getvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_GETVALID
+ * ARG0: devhandle
+ * ARG1: msinum
+ * RET0: status
+ * RET1: msivalidstate
+ * ERRORS: EINVAL Invalid devhandle or msinum
+ *
+ * Get the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_GETVALID 0xc9
+
+/* pci_msi_setvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_SETVALID
+ * ARG0: devhandle
+ * ARG1: msinum
+ * ARG2: msivalidstate
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate
+ *
+ * Set the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETVALID 0xca
+
+/* pci_msi_getmsiq()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ
+ * ARG0: devhandle
+ * ARG1: msinum
+ * RET0: status
+ * RET1: msiqid
+ * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound
+ *
+ * Get the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_GETMSIQ 0xcb
+
+/* pci_msi_setmsiq()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ
+ * ARG0: devhandle
+ * ARG1: msinum
+ * ARG2: msitype
+ * ARG3: msiqid
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msinum or msiqid
+ *
+ * Set the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_SETMSIQ 0xcc
+
+/* pci_msi_getstate()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_GETSTATE
+ * ARG0: devhandle
+ * ARG1: msinum
+ * RET0: status
+ * RET1: msistate
+ * ERRORS: EINVAL Invalid devhandle or msinum
+ *
+ * Get the state of the MSI defined by the given devhandle and msinum.
+ * If not initialized, return HV_MSISTATE_IDLE.
+ */
+#define HV_FAST_PCI_MSI_GETSTATE 0xcd
+
+/* pci_msi_setstate()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSI_SETSTATE
+ * ARG0: devhandle
+ * ARG1: msinum
+ * ARG2: msistate
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msinum or msistate
+ *
+ * Set the state of the MSI defined by the given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETSTATE 0xce
+
+/* pci_msg_getmsiq()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ
+ * ARG0: devhandle
+ * ARG1: msgtype
+ * RET0: status
+ * RET1: msiqid
+ * ERRORS: EINVAL Invalid devhandle or msgtype
+ *
+ * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETMSIQ 0xd0
+
+/* pci_msg_setmsiq()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ
+ * ARG0: devhandle
+ * ARG1: msgtype
+ * ARG2: msiqid
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid
+ *
+ * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETMSIQ 0xd1
+
+/* pci_msg_getvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSG_GETVALID
+ * ARG0: devhandle
+ * ARG1: msgtype
+ * RET0: status
+ * RET1: msgvalidstate
+ * ERRORS: EINVAL Invalid devhandle or msgtype
+ *
+ * Get the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETVALID 0xd2
+
+/* pci_msg_setvalid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_PCI_MSG_SETVALID
+ * ARG0: devhandle
+ * ARG1: msgtype
+ * ARG2: msgvalidstate
+ * RET0: status
+ * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate
+ *
+ * Set the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETVALID 0xd3
+
+/* Performance counter services. */
+
+#define HV_PERF_JBUS_PERF_CTRL_REG 0x00
+#define HV_PERF_JBUS_PERF_CNT_REG 0x01
+#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02
+#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03
+#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04
+#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05
+#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06
+#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07
+#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08
+#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09
+
+/* get_perfreg()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_GET_PERFREG
+ * ARG0: performance reg number
+ * RET0: status
+ * RET1: performance reg value
+ * ERRORS: EINVAL Invalid performance register number
+ * ENOACCESS No access allowed to performance counters
+ *
+ * Read the value of the given DRAM/JBUS performance counter/control register.
+ */
+#define HV_FAST_GET_PERFREG 0x100
+
+/* set_perfreg()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_SET_PERFREG
+ * ARG0: performance reg number
+ * ARG1: performance reg value
+ * RET0: status
+ * ERRORS: EINVAL Invalid performance register number
+ * ENOACCESS No access allowed to performance counters
+ *
+ * Write the given performance reg value to the given DRAM/JBUS
+ * performance counter/control register.
+ */
+#define HV_FAST_SET_PERFREG 0x101
+
+/* MMU statistics services.
+ *
+ * The hypervisor maintains MMU statistics and privileged code provides
+ * a buffer where these statistics can be collected. It is continually
+ * updated once configured. The layout is as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_mmu_statistics {
+ unsigned long immu_tsb_hits_ctx0_8k_tte;
+ unsigned long immu_tsb_ticks_ctx0_8k_tte;
+ unsigned long immu_tsb_hits_ctx0_64k_tte;
+ unsigned long immu_tsb_ticks_ctx0_64k_tte;
+ unsigned long __reserved1[2];
+ unsigned long immu_tsb_hits_ctx0_4mb_tte;
+ unsigned long immu_tsb_ticks_ctx0_4mb_tte;
+ unsigned long __reserved2[2];
+ unsigned long immu_tsb_hits_ctx0_256mb_tte;
+ unsigned long immu_tsb_ticks_ctx0_256mb_tte;
+ unsigned long __reserved3[4];
+ unsigned long immu_tsb_hits_ctxnon0_8k_tte;
+ unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
+ unsigned long immu_tsb_hits_ctxnon0_64k_tte;
+ unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
+ unsigned long __reserved4[2];
+ unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
+ unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
+ unsigned long __reserved5[2];
+ unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
+ unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
+ unsigned long __reserved6[4];
+ unsigned long dmmu_tsb_hits_ctx0_8k_tte;
+ unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
+ unsigned long dmmu_tsb_hits_ctx0_64k_tte;
+ unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
+ unsigned long __reserved7[2];
+ unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
+ unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
+ unsigned long __reserved8[2];
+ unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
+ unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
+ unsigned long __reserved9[4];
+ unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
+ unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
+ unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
+ unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
+ unsigned long __reserved10[2];
+ unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
+ unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
+ unsigned long __reserved11[2];
+ unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
+ unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
+ unsigned long __reserved12[4];
+};
+#endif
+
+/* mmustat_conf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMUSTAT_CONF
+ * ARG0: real address
+ * RET0: status
+ * RET1: real address
+ * ERRORS: ENORADDR Invalid real address
+ * EBADALIGN Real address not aligned on 64-byte boundary
+ * EBADTRAP API not supported on this processor
+ *
+ * Enable MMU statistic gathering using the buffer at the given real
+ * address on the current virtual CPU. The new buffer real address
+ * is given in ARG1, and the previously specified buffer real address
+ * is returned in RET1, or is returned as zero for the first invocation.
+ *
+ * If the passed in real address argument is zero, this will disable
+ * MMU statistic collection on the current virtual CPU. If an error is
+ * returned then no statistics are collected.
+ *
+ * The buffer contents should be initialized to all zeros before being
+ * given to the hypervisor or else the statistics will be meaningless.
+ */
+#define HV_FAST_MMUSTAT_CONF 0x102
+
+/* mmustat_info()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MMUSTAT_INFO
+ * RET0: status
+ * RET1: real address
+ * ERRORS: EBADTRAP API not supported on this processor
+ *
+ * Return the current state and real address of the currently configured
+ * MMU statistics buffer on the current virtual CPU.
+ */
+#define HV_FAST_MMUSTAT_INFO 0x103
+
+/* Function numbers for HV_CORE_TRAP. */
+#define HV_CORE_VER 0x00
+#define HV_CORE_PUTCHAR 0x01
+#define HV_CORE_EXIT 0x02
+
+#endif /* !(_SPARC64_HYPERVISOR_H) */