diff options
Diffstat (limited to 'include/asm-x86/visws/cobalt.h')
-rw-r--r-- | include/asm-x86/visws/cobalt.h | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/include/asm-x86/visws/cobalt.h b/include/asm-x86/visws/cobalt.h new file mode 100644 index 00000000000..995258831b7 --- /dev/null +++ b/include/asm-x86/visws/cobalt.h @@ -0,0 +1,125 @@ +#ifndef __I386_SGI_COBALT_H +#define __I386_SGI_COBALT_H + +#include <asm/fixmap.h> + +/* + * Cobalt SGI Visual Workstation system ASIC + */ + +#define CO_CPU_NUM_PHYS 0x1e00 +#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2) + +#define CO_CPU_MAX 4 + +#define CO_CPU_PHYS 0xc2000000 +#define CO_APIC_PHYS 0xc4000000 + +/* see set_fixmap() and asm/fixmap.h */ +#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU)) +#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC)) + +/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */ +#define CO_CPU_REV 0x08 +#define CO_CPU_CTRL 0x10 +#define CO_CPU_STAT 0x20 +#define CO_CPU_TIMEVAL 0x30 + +/* CO_CPU_CTRL bits */ +#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */ +#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */ + +/* CO_CPU_STATUS bits */ +#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */ + +/* CO_CPU_TIMEVAL value */ +#define CO_TIME_HZ 100000000 /* Cobalt core rate */ + +/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */ +#define CO_APIC_HI(n) (((n) * 0x10) + 4) +#define CO_APIC_LO(n) ((n) * 0x10) +#define CO_APIC_ID 0x0ffc + +/* CO_APIC_ID bits */ +#define CO_APIC_ENABLE 0x00000100 + +/* CO_APIC_LO bits */ +#define CO_APIC_MASK 0x00010000 /* 0 = enabled */ +#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */ + +/* + * Where things are physically wired to Cobalt + * #defines with no board _<type>_<rev>_ are common to all (thus far) + */ +#define CO_APIC_IDE0 4 +#define CO_APIC_IDE1 2 /* Only on 320 */ + +#define CO_APIC_8259 12 /* serial, floppy, par-l-l */ + +/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */ +#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */ +#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */ + +#define CO_APIC_PIIX4_USB 7 /* this one is weird */ + +/* Lithium PCI Bridge B -- "the one with PIIX4" */ +#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */ +#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */ + +#define CO_APIC_VIDOUT0 16 +#define CO_APIC_VIDOUT1 17 +#define CO_APIC_VIDIN0 18 +#define CO_APIC_VIDIN1 19 + +#define CO_APIC_LI_AUDIO 22 + +#define CO_APIC_AS 24 +#define CO_APIC_RE 25 + +#define CO_APIC_CPU 28 /* Timer and Cache interrupt */ +#define CO_APIC_NMI 29 +#define CO_APIC_LAST CO_APIC_NMI + +/* + * This is how irqs are assigned on the Visual Workstation. + * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU). + * All other devices (including PCI) go to Cobalt and are irq's 16 on up. + */ +#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */ +#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0) +#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */ +#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */ +#define CO_IRQ_IDE0 14 /* knowledge of... */ +#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */ +#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259) + +#ifdef CONFIG_X86_VISWS_APIC +static inline void co_cpu_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v; +} + +static inline unsigned long co_cpu_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_CPU_VADDR+reg)); +} + +static inline void co_apic_write(unsigned long reg, unsigned long v) +{ + *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v; +} + +static inline unsigned long co_apic_read(unsigned long reg) +{ + return *((volatile unsigned long *)(CO_APIC_VADDR+reg)); +} +#endif + +extern char visws_board_type; + +#define VISWS_320 0 +#define VISWS_540 1 + +extern char visws_board_rev; + +#endif /* __I386_SGI_COBALT_H */ |