diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ieee80211.h | 1 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 31 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 19 |
3 files changed, 47 insertions, 4 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7f4df7c7659..be456450cd2 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,7 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_SGI_40 0x0040 #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 /* 802.11n HT capability AMPDU settings */ #define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 #define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2be7c63bc0f..0c1147de3ec 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -89,6 +89,8 @@ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use @@ -127,6 +129,8 @@ enum nl80211_commands { NL80211_CMD_NEW_MPATH, NL80211_CMD_DEL_MPATH, + NL80211_CMD_SET_BSS, + /* add commands here */ /* used to define NL80211_CMD_MAX below */ @@ -134,6 +138,11 @@ enum nl80211_commands { NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS /** * enum nl80211_attrs - nl80211 netlink attributes @@ -192,6 +201,15 @@ enum nl80211_commands { * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -235,16 +253,29 @@ enum nl80211_attrs { NL80211_ATTR_MPATH_NEXT_HOP, NL80211_ATTR_MPATH_INFO, + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 /** * enum nl80211_iftype - (virtual) interface types diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index ebad0bac980..99a0f991e85 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -245,8 +245,6 @@ /* SPROM Revision 3 (inherits most data from rev 2) */ #define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ -#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -267,8 +265,6 @@ /* SPROM Revision 4 */ #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ @@ -316,6 +312,21 @@ #define SSB_SPROM4_PA1B1 0x1090 #define SSB_SPROM4_PA1B2 0x1092 +/* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM5_GPIOA_P1_SHIFT 8 +#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, |