diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ide.h | 131 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 1 |
2 files changed, 7 insertions, 125 deletions
diff --git a/include/linux/ide.h b/include/linux/ide.h index a39c3c59789..7b6a6a58e46 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -23,17 +23,6 @@ #include <asm/io.h> #include <asm/semaphore.h> -/* - * This is the multiple IDE interface driver, as evolved from hd.c. - * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15). - * There can be up to two drives per interface, as per the ATA-2 spec. - * - * Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64 - * Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64 - * Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64 - * Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64 - */ - /****************************************************************************** * IDE driver configuration options (play with these as desired): * @@ -193,11 +182,6 @@ typedef unsigned char byte; /* used everywhere */ #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ -#define HOST(hwif,chipset) \ -{ \ - return ((hwif)->chipset == chipset) ? 1 : 0; \ -} - /* * Check for an interrupt and acknowledge the interrupt status */ @@ -391,45 +375,6 @@ typedef union { } ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t; /* - * ATA-IDE Error Register - * - * mark : Bad address mark - * tzero : Couldn't find track 0 - * abrt : Aborted Command - * mcr : Media Change Request - * id : ID field not found - * mce : Media Change Event - * ecc : Uncorrectable ECC error - * bdd : dual meaing - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned mark :1; - unsigned tzero :1; - unsigned abrt :1; - unsigned mcr :1; - unsigned id :1; - unsigned mce :1; - unsigned ecc :1; - unsigned bdd :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned bdd :1; - unsigned ecc :1; - unsigned mce :1; - unsigned id :1; - unsigned mcr :1; - unsigned abrt :1; - unsigned tzero :1; - unsigned mark :1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - } b; -} ata_error_t; - -/* * ATA-IDE Select Register, aka Device-Head * * head : always zeros here @@ -504,39 +449,6 @@ typedef union { } ata_status_t, atapi_status_t; /* - * ATA-IDE Control Register - * - * bit0 : Should be set to zero - * nIEN : device INTRQ to host - * SRST : host soft reset bit - * bit3 : ATA-2 thingy, Should be set to 1 - * reserved456 : Reserved - * HOB : 48-bit address ordering, High Ordered Bit - */ -typedef union { - unsigned all : 8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned bit0 : 1; - unsigned nIEN : 1; - unsigned SRST : 1; - unsigned bit3 : 1; - unsigned reserved456 : 3; - unsigned HOB : 1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned HOB : 1; - unsigned reserved456 : 3; - unsigned bit3 : 1; - unsigned SRST : 1; - unsigned nIEN : 1; - unsigned bit0 : 1; -#else -#error "Please fix <asm/byteorder.h>" -#endif - } b; -} ata_control_t; - -/* * ATAPI Feature Register * * dma : Using DMA or PIO @@ -618,39 +530,6 @@ typedef union { } atapi_error_t; /* - * ATAPI floppy Drive Select Register - * - * sam_lun : Logical unit number - * reserved3 : Reserved - * drv : The responding drive will be drive 0 (0) or drive 1 (1) - * one5 : Should be set to 1 - * reserved6 : Reserved - * one7 : Should be set to 1 - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned sam_lun :3; - unsigned reserved3 :1; - unsigned drv :1; - unsigned one5 :1; - unsigned reserved6 :1; - unsigned one7 :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned one7 :1; - unsigned reserved6 :1; - unsigned one5 :1; - unsigned drv :1; - unsigned reserved3 :1; - unsigned sam_lun :3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - } b; -} atapi_select_t; - -/* * Status returned from various ide_ functions */ typedef enum { @@ -1101,10 +980,7 @@ typedef struct ide_driver_s { int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); ide_startstop_t (*abort)(ide_drive_t *, struct request *rq); - int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long); ide_proc_entry_t *proc; - void (*ata_prebuilder)(ide_drive_t *); - void (*atapi_prebuilder)(ide_drive_t *); struct device_driver gen_driver; } ide_driver_t; @@ -1298,7 +1174,6 @@ extern int ide_spin_wait_hwgroup(ide_drive_t *); extern void ide_timer_expiry(unsigned long); extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs); extern void do_ide_request(request_queue_t *); -extern void ide_init_subdrivers(void); void ide_init_disk(struct gendisk *, ide_drive_t *); @@ -1371,6 +1246,12 @@ void ide_init_sg_cmd(ide_drive_t *, struct request *); #define GOOD_DMA_DRIVE 1 #ifdef CONFIG_BLK_DEV_IDEDMA +struct drive_list_entry { + const char *id_model; + const char *id_firmware; +}; + +int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); int __ide_dma_bad_drive(ide_drive_t *); int __ide_dma_good_drive(ide_drive_t *); int ide_use_dma(ide_drive_t *); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1e737e269db..4db67b3b05c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1244,6 +1244,7 @@ #define PCI_DEVICE_ID_VIA_8378_0 0x3205 #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 +#define PCI_DEVICE_ID_VIA_8251 0x3287 #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 |