diff options
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/ieee80211.h | 17 | ||||
-rw-r--r-- | include/linux/if_frad.h | 1 | ||||
-rw-r--r-- | include/linux/netdevice.h | 1 | ||||
-rw-r--r-- | include/linux/netfilter/x_tables.h | 23 | ||||
-rw-r--r-- | include/linux/nl80211.h | 88 | ||||
-rw-r--r-- | include/linux/pci_ids.h | 2 |
6 files changed, 129 insertions, 3 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b1bb817d142..4b501b48ce8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -18,6 +18,22 @@ #include <linux/types.h> #include <asm/byteorder.h> +/* + * DS bit usage + * + * TA = transmitter address + * RA = receiver address + * DA = destination address + * SA = source address + * + * ToDS FromDS A1(RA) A2(TA) A3 A4 Use + * ----------------------------------------------------------------- + * 0 0 DA SA BSSID - IBSS/DLS + * 0 1 DA BSSID SA - AP -> STA + * 1 0 BSSID SA DA - AP <- STA + * 1 1 RA TA DA SA unspecified (WDS) + */ + #define FCS_LEN 4 #define IEEE80211_FCTL_VERS 0x0003 @@ -851,6 +867,7 @@ struct ieee80211_ht_info { /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 +#define WLAN_AUTH_FT 2 #define WLAN_AUTH_LEAP 128 #define WLAN_AUTH_CHALLENGE_LEN 128 diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 60e16a551dd..673f2209453 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -153,7 +153,6 @@ struct frhdr struct dlci_local { - struct net_device_stats stats; struct net_device *master; struct net_device *slave; struct dlci_conf config; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index be3ebd7e8ce..1b55952a17f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -32,6 +32,7 @@ #ifdef __KERNEL__ #include <linux/timer.h> #include <linux/delay.h> +#include <linux/mm.h> #include <asm/atomic.h> #include <asm/cache.h> #include <asm/byteorder.h> diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index adbc50a20ec..7b1a652066c 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -437,6 +437,29 @@ extern void xt_free_table_info(struct xt_table_info *info); extern void xt_table_entry_swap_rcu(struct xt_table_info *old, struct xt_table_info *new); +/* + * This helper is performance critical and must be inlined + */ +static inline unsigned long ifname_compare_aligned(const char *_a, + const char *_b, + const char *_mask) +{ + const unsigned long *a = (const unsigned long *)_a; + const unsigned long *b = (const unsigned long *)_b; + const unsigned long *mask = (const unsigned long *)_mask; + unsigned long ret; + + ret = (a[0] ^ b[0]) & mask[0]; + if (IFNAMSIZ > sizeof(unsigned long)) + ret |= (a[1] ^ b[1]) & mask[1]; + if (IFNAMSIZ > 2 * sizeof(unsigned long)) + ret |= (a[2] ^ b[2]) & mask[2]; + if (IFNAMSIZ > 3 * sizeof(unsigned long)) + ret |= (a[3] ^ b[3]) & mask[3]; + BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long)); + return ret; +} + #ifdef CONFIG_COMPAT #include <net/compat.h> diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index f33aa08dd9b..cbe8ce3bf48 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -142,6 +142,12 @@ * %NL80211_ATTR_IE. If the command succeeds, the requested data will be * added to all specified management frames generated by * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. * * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters @@ -161,6 +167,38 @@ * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on * to (%NL80211_ATTR_REG_ALPHA2). * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -206,7 +244,7 @@ enum nl80211_commands { NL80211_CMD_GET_MESH_PARAMS, NL80211_CMD_SET_MESH_PARAMS, - NL80211_CMD_SET_MGMT_EXTRA_IE, + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, NL80211_CMD_GET_REG, @@ -217,6 +255,11 @@ enum nl80211_commands { NL80211_CMD_REG_CHANGE, + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -230,8 +273,11 @@ enum nl80211_commands { */ #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE - #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -349,6 +395,19 @@ enum nl80211_commands { * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -426,6 +485,13 @@ enum nl80211_attrs { NL80211_ATTR_REG_INITIATOR, NL80211_ATTR_REG_TYPE, + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -445,6 +511,10 @@ enum nl80211_attrs { #define NL80211_ATTR_IE NL80211_ATTR_IE #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -978,4 +1048,18 @@ enum nl80211_bss { NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 }; +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, +}; #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 097f410edef..05dfa7c4fb6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2271,6 +2271,8 @@ #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 #define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff +#define PCI_VENDOR_ID_QMI 0x1a32 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 |