diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/acpi.h | 3 | ||||
| -rw-r--r-- | include/linux/device.h | 9 | ||||
| -rw-r--r-- | include/linux/pci.h | 57 | ||||
| -rw-r--r-- | include/linux/pci_hotplug.h | 14 | ||||
| -rw-r--r-- | include/linux/pci_regs.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_device.h | 1 | ||||
| -rw-r--r-- | include/linux/pm.h | 314 | ||||
| -rw-r--r-- | include/linux/pm_wakeup.h | 28 | ||||
| -rw-r--r-- | include/linux/suspend.h | 14 |
9 files changed, 373 insertions, 68 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 0601075d09a..a1717763937 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -235,6 +235,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_check_mem_region(resource_size_t start, resource_size_t n, const char *name); +#ifdef CONFIG_PM_SLEEP +void __init acpi_old_suspend_ordering(void); +#endif /* CONFIG_PM_SLEEP */ #else /* CONFIG_ACPI */ static inline int early_acpi_boot_init(void) diff --git a/include/linux/device.h b/include/linux/device.h index 6a2d04c011b..f71a78d123a 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -68,6 +68,8 @@ struct bus_type { int (*resume_early)(struct device *dev); int (*resume)(struct device *dev); + struct pm_ext_ops *pm; + struct bus_type_private *p; }; @@ -131,6 +133,8 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; + struct pm_ops *pm; + struct driver_private *p; }; @@ -197,6 +201,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; extern int __must_check class_register(struct class *class); @@ -248,8 +254,11 @@ struct device_type { struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); void (*release)(struct device *dev); + int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; /* interface for exporting device attributes */ diff --git a/include/linux/pci.h b/include/linux/pci.h index d18b1dd49fa..a6a088e1a80 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -17,8 +17,7 @@ #ifndef LINUX_PCI_H #define LINUX_PCI_H -/* Include the pci register defines */ -#include <linux/pci_regs.h> +#include <linux/pci_regs.h> /* The pci register defines */ /* * The PCI interface treats multi-function devices as independent @@ -49,12 +48,22 @@ #include <linux/list.h> #include <linux/compiler.h> #include <linux/errno.h> +#include <linux/kobject.h> #include <asm/atomic.h> #include <linux/device.h> /* Include the ID list */ #include <linux/pci_ids.h> +/* pci_slot represents a physical slot */ +struct pci_slot { + struct pci_bus *bus; /* The bus this slot is on */ + struct list_head list; /* node in list of slots on this bus */ + struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */ + unsigned char number; /* PCI_SLOT(pci_dev->devfn) */ + struct kobject kobj; +}; + /* File state for mmap()s on /proc/bus/pci/X/Y */ enum pci_mmap_state { pci_mmap_io, @@ -142,6 +151,7 @@ struct pci_dev { void *sysdata; /* hook for sys-specific extension */ struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ + struct pci_slot *slot; /* Physical slot this device is in */ unsigned int devfn; /* encoded device & function index */ unsigned short vendor; @@ -167,6 +177,13 @@ struct pci_dev { pci_power_t current_state; /* Current operating state. In ACPI-speak, this is D0-D3, D0 being fully functional, and D3 being off. */ + int pm_cap; /* PM capability offset in the + configuration space */ + unsigned int pme_support:5; /* Bitmask of states from which PME# + can be generated */ + unsigned int d1_support:1; /* Low power state D1 is supported */ + unsigned int d2_support:1; /* Low power state D2 is supported */ + unsigned int no_d1d2:1; /* Only allow D0 and D3 */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ @@ -191,7 +208,6 @@ struct pci_dev { unsigned int is_added:1; unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ - unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; @@ -267,6 +283,7 @@ struct pci_bus { struct list_head children; /* list of child buses */ struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ + struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BUS_NUM_RESOURCES]; /* address space routed to this bus */ @@ -328,7 +345,7 @@ struct pci_bus_region { struct pci_dynids { spinlock_t lock; /* protects list, index */ struct list_head list; /* for IDs added at runtime */ - unsigned int use_driver_data:1; /* pci_driver->driver_data is used */ + unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */ }; /* ---------------------------------------------------------------- */ @@ -390,7 +407,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); - + struct pm_ext_ops *pm; struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; @@ -489,6 +506,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, + const char *name); +void pci_destroy_slot(struct pci_slot *slot); +void pci_update_slot_number(struct pci_slot *slot, int slot_nr); int pci_scan_slot(struct pci_bus *bus, int devfn); struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn); void pci_device_add(struct pci_dev *dev, struct pci_bus *bus); @@ -618,6 +639,8 @@ int pci_restore_state(struct pci_dev *dev); int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); +int pci_prepare_to_sleep(struct pci_dev *dev); +int pci_back_from_sleep(struct pci_dev *dev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); @@ -839,6 +862,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) return -EIO; } +static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + return -EIO; +} + static inline int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) { @@ -977,9 +1005,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data) /* If you want to know what to call your pci_dev, ask this function. * Again, it's a wrapper around the generic device. */ -static inline char *pci_name(struct pci_dev *pdev) +static inline const char *pci_name(struct pci_dev *pdev) { - return pdev->dev.bus_id; + return dev_name(&pdev->dev); } @@ -1014,7 +1042,9 @@ enum pci_fixup_pass { pci_fixup_header, /* After reading configuration header */ pci_fixup_final, /* Final phase of device fixups */ pci_fixup_enable, /* pci_enable_device() time */ - pci_fixup_resume, /* pci_enable_device() time */ + pci_fixup_resume, /* pci_device_resume() */ + pci_fixup_suspend, /* pci_device_suspend */ + pci_fixup_resume_early, /* pci_device_resume_early() */ }; /* Anonymous variables would be nice... */ @@ -1036,6 +1066,12 @@ enum pci_fixup_pass { #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ resume##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, hook) void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); @@ -1060,7 +1096,10 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern int pcibios_add_platform_entries(struct pci_dev *dev); +int pcibios_add_platform_entries(struct pci_dev *dev); +void pcibios_disable_device(struct pci_dev *dev); +int pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state); #ifdef CONFIG_PCI_MMCONFIG extern void __init pci_mmcfg_early_init(void); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 8f67e8f2a3c..a08cd06b541 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -95,9 +95,6 @@ struct hotplug_slot_attribute { * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. - * @get_address: Called to get pci address of a slot. - * If this field is NULL, the value passed in the struct hotplug_slot_info - * will be used when this value is requested by a user. * @get_max_bus_speed: Called to get the max bus speed for a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. @@ -120,7 +117,6 @@ struct hotplug_slot_ops { int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); - int (*get_address) (struct hotplug_slot *slot, u32 *value); int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); }; @@ -140,7 +136,6 @@ struct hotplug_slot_info { u8 attention_status; u8 latch_status; u8 adapter_status; - u32 address; enum pci_bus_speed max_bus_speed; enum pci_bus_speed cur_bus_speed; }; @@ -166,15 +161,14 @@ struct hotplug_slot { /* Variables below this are for use only by the hotplug pci core. */ struct list_head slot_list; - struct kobject kobj; + struct pci_slot *pci_slot; }; #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) -extern int pci_hp_register (struct hotplug_slot *slot); -extern int pci_hp_deregister (struct hotplug_slot *slot); +extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr); +extern int pci_hp_deregister(struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); -extern struct kset *pci_hotplug_slots_kset; /* PCI Setting Record (Type 0) */ struct hpp_type0 { @@ -227,9 +221,9 @@ struct hotplug_params { #include <acpi/acpi.h> #include <acpi/acpi_bus.h> #include <acpi/actypes.h> -extern acpi_status acpi_run_oshp(acpi_handle handle); extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); +int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_root_bridge(acpi_handle handle); #endif #endif diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index c0c1223c919..19958b92990 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -231,6 +231,7 @@ #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ #define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 3261681c82a..95ac21ab3a0 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -53,6 +53,7 @@ struct platform_driver { int (*suspend_late)(struct platform_device *, pm_message_t state); int (*resume_early)(struct platform_device *); int (*resume)(struct platform_device *); + struct pm_ext_ops *pm; struct device_driver driver; }; diff --git a/include/linux/pm.h b/include/linux/pm.h index 39a7ee859b6..4ad9de94449 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -112,7 +112,9 @@ typedef struct pm_message { int event; } pm_message_t; -/* +/** + * struct pm_ops - device PM callbacks + * * Several driver power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be @@ -120,6 +122,284 @@ typedef struct pm_message { * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * + * The externally visible transitions are handled with the help of the following + * callbacks included in this structure: + * + * @prepare: Prepare the device for the upcoming transition, but do NOT change + * its hardware state. Prevent new children of the device from being + * registered after @prepare() returns (the driver's subsystem and + * generally the rest of the kernel is supposed to prevent new calls to the + * probe method from being made too once @prepare() has succeeded). If + * @prepare() detects a situation it cannot handle (e.g. registration of a + * child already in progress), it may return -EAGAIN, so that the PM core + * can execute it once again (e.g. after the new child has been registered) + * to recover from the race condition. This method is executed for all + * kinds of suspend transitions and is followed by one of the suspend + * callbacks: @suspend(), @freeze(), or @poweroff(). + * The PM core executes @prepare() for all devices before starting to + * execute suspend callbacks for any of them, so drivers may assume all of + * the other devices to be present and functional while @prepare() is being + * executed. In particular, it is safe to make GFP_KERNEL memory + * allocations from within @prepare(). However, drivers may NOT assume + * anything about the availability of the user space at that time and it + * is not correct to request firmware from within @prepare() (it's too + * late to do that). [To work around this limitation, drivers may + * register suspend and hibernation notifiers that are executed before the + * freezing of tasks.] + * + * @complete: Undo the changes made by @prepare(). This method is executed for + * all kinds of resume transitions, following one of the resume callbacks: + * @resume(), @thaw(), @restore(). Also called if the state transition + * fails before the driver's suspend callback (@suspend(), @freeze(), + * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * of the other devices that the PM core has unsuccessfully attempted to + * suspend earlier). + * The PM core executes @complete() after it has executed the appropriate + * resume callback for all devices. + * + * @suspend: Executed before putting the system into a sleep state in which the + * contents of main memory are preserved. Quiesce the device, put it into + * a low power state appropriate for the upcoming system state (such as + * PCI_D3hot), and enable wakeup events as appropriate. + * + * @resume: Executed after waking the system up from a sleep state in which the + * contents of main memory were preserved. Put the device into the + * appropriate state, according to the information saved in memory by the + * preceding @suspend(). The driver starts working again, responding to + * hardware events and software requests. The hardware may have gone + * through a power-off reset, or it may have maintained state from the + * previous suspend() which the driver may rely on while resuming. On most + * platforms, there are no restrictions on availability of resources like + * clocks during @resume(). + * + * @freeze: Hibernation-specific, executed before creating a hibernation image. + * Quiesce operations so that a consistent image can be created, but do NOT + * otherwise put the device into a low power device state and do NOT emit + * system wakeup events. Save in main memory the device settings to be + * used by @restore() during the subsequent resume from hibernation or by + * the subsequent @thaw(), if the creation of the image or the restoration + * of main memory contents from it fails. + * + * @thaw: Hibernation-specific, executed after creating a hibernation image OR + * if the creation of the image fails. Also executed after a failing + * attempt to restore the contents of main memory from such an image. + * Undo the changes made by the preceding @freeze(), so the device can be + * operated in the same way as immediately before the call to @freeze(). + * + * @poweroff: Hibernation-specific, executed after saving a hibernation image. + * Quiesce the device, put it into a low power state appropriate for the + * upcoming system state (such as PCI_D3hot), and enable wakeup events as + * appropriate. + * + * @restore: Hibernation-specific, executed after restoring the contents of main + * memory from a hibernation image. Driver starts working again, + * responding to hardware events and software requests. Drivers may NOT + * make ANY assumptions about the hardware state right prior to @restore(). + * On most platforms, there are no restrictions on availability of + * resources like clocks during @restore(). + * + * All of the above callbacks, except for @complete(), return error codes. + * However, the error codes returned by the resume operations, @resume(), + * @thaw(), and @restore(), do not cause the PM core to abort the resume + * transition during which they are returned. The error codes returned in + * that cases are only printed by the PM core to the system logs for debugging + * purposes. Still, it is recommended that drivers only return error codes + * from their resume methods in case of an unrecoverable failure (i.e. when the + * device being handled refuses to resume and becomes unusable) to allow us to + * modify the PM core in the future, so that it can avoid attempting to handle + * devices that failed to resume and their children. + * + * It is allowed to unregister devices while the above callbacks are being + * executed. However, it is not allowed to unregister a device from within any + * of its own callbacks. + */ + +struct pm_ops { + int (*prepare)(struct device *dev); + void (*complete)(struct device *dev); + int (*suspend)(struct device *dev); + int (*resume)(struct device *dev); + int (*freeze)(struct device *dev); + int (*thaw)(struct device *dev); + int (*poweroff)(struct device *dev); + int (*restore)(struct device *dev); +}; + +/** + * struct pm_ext_ops - extended device PM callbacks + * + * Some devices require certain operations related to suspend and hibernation + * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below + * is defined, adding callbacks to be executed with interrupts disabled to + * 'struct pm_ops'. + * + * The following callbacks included in 'struct pm_ext_ops' are executed with + * the nonboot CPUs switched off and with interrupts disabled on the only + * functional CPU. They also are executed with the PM core list of devices + * locked, so they must NOT unregister any devices. + * + * @suspend_noirq: Complete the operations of ->suspend() by carrying out any + * actions required for suspending the device that need interrupts to be + * disabled + * + * @resume_noirq: Prepare for the execution of ->resume() by carrying out any + * actions required for resuming the device that need interrupts to be + * disabled + * + * @freeze_noirq: Complete the operations of ->freeze() by carrying out any + * actions required for freezing the device that need interrupts to be + * disabled + * + * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any + * actions required for thawing the device that need interrupts to be + * disabled + * + * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any + * actions required for handling the device that need interrupts to be + * disabled + * + * @restore_noirq: Prepare for the execution of ->restore() by carrying out any + * actions required for restoring the operations of the device that need + * interrupts to be disabled + * + * All of the above callbacks return error codes, but the error codes returned + * by the resume operations, @resume_noirq(), @thaw_noirq(), and + * @restore_noirq(), do not cause the PM core to abort the resume transition + * during which they are returned. The error codes returned in that cases are + * only printed by the PM core to the system logs for debugging purposes. + * Still, as stated above, it is recommended that drivers only return error + * codes from their resume methods if the device being handled fails to resume + * and is not usable any more. + */ + +struct pm_ext_ops { + struct pm_ops base; + int (*suspend_noirq)(struct device *dev); + int (*resume_noirq)(struct device *dev); + int (*freeze_noirq)(struct device *dev); + int (*thaw_noirq)(struct device *dev); + int (*poweroff_noirq)(struct device *dev); + int (*restore_noirq)(struct device *dev); +}; + +/** + * PM_EVENT_ messages + * + * The following PM_EVENT_ messages are defined for the internal use of the PM + * core, in order to provide a mechanism allowing the high level suspend and + * hibernation code to convey the necessary information to the device PM core + * code: + * + * ON No transition. + * + * FREEZE System is going to hibernate, call ->prepare() and ->freeze() + * for all devices. + * + * SUSPEND System is going to suspend, call ->prepare() and ->suspend() + * for all devices. + * + * HIBERNATE Hibernation image has been saved, call ->prepare() and + * ->poweroff() for all devices. + * + * QUIESCE Contents of main memory are going to be restored from a (loaded) + * hibernation image, call ->prepare() and ->freeze() for all + * devices. + * + * RESUME System is resuming, call ->resume() and ->complete() for all + * devices. + * + * THAW Hibernation image has been created, call ->thaw() and + * ->complete() for all devices. + * + * RESTORE Contents of main memory have been restored from a hibernation + * image, call ->restore() and ->complete() for all devices. + * + * RECOVER Creation of a hibernation image or restoration of the main + * memory contents from a hibernation image has failed, call + * ->thaw() and ->complete() for all devices. + */ + +#define PM_EVENT_ON 0x0000 +#define PM_EVENT_FREEZE 0x0001 +#define PM_EVENT_SUSPEND 0x0002 +#define PM_EVENT_HIBERNATE 0x0004 +#define PM_EVENT_QUIESCE 0x0008 +#define PM_EVENT_RESUME 0x0010 +#define PM_EVENT_THAW 0x0020 +#define PM_EVENT_RESTORE 0x0040 +#define PM_EVENT_RECOVER 0x0080 + +#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) + +#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) +#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) +#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) +#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) +#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, }) +#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, }) +#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, }) +#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, }) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) + +/** + * Device power management states + * + * These state labels are used internally by the PM core to indicate the current + * status of a device with respect to the PM core operations. + * + * DPM_ON Device is regarded as operational. Set this way + * initially and when ->complete() is about to be called. + * Also set when ->prepare() fails. + * + * DPM_PREPARING Device is going to be prepared for a PM transition. Set + * when ->prepare() is about to be called. + * + * DPM_RESUMING Device is going to be resumed. Set when ->resume(), + * ->thaw(), or ->restore() is about to be called. + * + * DPM_SUSPENDING Device has been prepared for a power transition. Set + * when ->prepare() has just succeeded. + * + * DPM_OFF Device is regarded as inactive. Set immediately after + * ->suspend(), ->freeze(), or ->poweroff() has succeeded. + * Also set when ->resume()_noirq, ->thaw_noirq(), or + * ->restore_noirq() is about to be called. + * + * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after + * ->suspend_noirq(), ->freeze_noirq(), or + * ->poweroff_noirq() has just succeeded. + */ + +enum dpm_state { + DPM_INVALID, + DPM_ON, + DPM_PREPARING, + DPM_RESUMING, + DPM_SUSPENDING, + DPM_OFF, + DPM_OFF_IRQ, +}; + +struct dev_pm_info { + pm_message_t power_state; + unsigned can_wakeup:1; + unsigned should_wakeup:1; + enum dpm_state status; /* Owned by the PM core */ +#ifdef CONFIG_PM_SLEEP + struct list_head entry; +#endif +}; + +/* + * The PM_EVENT_ messages are also used by drivers implementing the legacy + * suspend framework, based on the ->suspend() and ->resume() callbacks common + * for suspend and hibernation transitions, according to the rules below. + */ + +/* Necessary, because several drivers use PM_EVENT_PRETHAW */ +#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE + +/* * One transition is triggered by resume(), after a suspend() call; the * message is implicit: * @@ -164,35 +444,13 @@ typedef struct pm_message { * or from system low-power states such as standby or suspend-to-RAM. */ -#define PM_EVENT_ON 0 -#define PM_EVENT_FREEZE 1 -#define PM_EVENT_SUSPEND 2 -#define PM_EVENT_HIBERNATE 4 -#define PM_EVENT_PRETHAW 8 - -#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) - -#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) -#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, }) -#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) -#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) -#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) - -struct dev_pm_info { - pm_message_t power_state; - unsigned can_wakeup:1; - unsigned should_wakeup:1; - bool sleeping:1; /* Owned by the PM core */ -#ifdef CONFIG_PM_SLEEP - struct list_head entry; -#endif -}; +#ifdef CONFIG_PM_SLEEP +extern void device_pm_lock(void); +extern void device_power_up(pm_message_t state); +extern void device_resume(pm_message_t state); +extern void device_pm_unlock(void); extern int device_power_down(pm_message_t state); -extern void device_power_up(void); -extern void device_resume(void); - -#ifdef CONFIG_PM_SLEEP extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index f0d0b2cb8d2..0aae7776185 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = dev->power.should_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) +{ + dev->power.can_wakeup = !!val; +} + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; @@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val) static inline int device_may_wakeup(struct device *dev) { - return dev->power.can_wakeup & dev->power.should_wakeup; -} - -/* - * Platform hook to activate device wakeup capability, if that's not already - * handled by enable_irq_wake() etc. - * Returns zero on success, else negative errno - */ -extern int (*platform_enable_wakeup)(struct device *dev, int is_on); - -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - if (platform_enable_wakeup) - return (*platform_enable_wakeup)(dev, is_on); - return 0; + return dev->power.can_wakeup && dev->power.should_wakeup; } #else /* !CONFIG_PM */ @@ -72,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) { } + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; @@ -80,11 +73,6 @@ static inline int device_can_wakeup(struct device *dev) #define device_set_wakeup_enable(dev, val) do {} while (0) #define device_may_wakeup(dev) 0 -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - return 0; -} - #endif /* !CONFIG_PM */ #endif /* _LINUX_PM_WAKEUP_H */ diff --git a/include/linux/suspend.h b/include/linux/suspend.h index a6977423baf..e8e69159af7 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t; * that implement @begin(), but platforms implementing @begin() should * also provide a @end() which cleans up transitions aborted before * @enter(). + * + * @recover: Recover the platform from a suspend failure. + * Called by the PM core if the suspending of devices fails. + * This callback is optional and should only be implemented by platforms + * which require special recovery actions in that situation. */ struct platform_suspend_ops { int (*valid)(suspend_state_t state); @@ -94,6 +99,7 @@ struct platform_suspend_ops { int (*enter)(suspend_state_t state); void (*finish)(void); void (*end)(void); + void (*recover)(void); }; #ifdef CONFIG_SUSPEND @@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone); * The methods in this structure allow a platform to carry out special * operations required by it during a hibernation transition. * - * All the methods below must be implemented. + * All the methods below, except for @recover(), must be implemented. * * @begin: Tell the platform driver that we're starting hibernation. * Called right after shrinking memory and before freezing devices. @@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone); * @restore_cleanup: Clean up after a failing image restoration. * Called right after the nonboot CPUs have been enabled and before * thawing devices (runs with IRQs on). + * + * @recover: Recover the platform from a failure to suspend devices. + * Called by the PM core if the suspending of devices during hibernation + * fails. This callback is optional and should only be implemented by + * platforms which require special recovery actions in that situation. */ struct platform_hibernation_ops { int (*begin)(void); @@ -200,6 +211,7 @@ struct platform_hibernation_ops { void (*leave)(void); int (*pre_restore)(void); void (*restore_cleanup)(void); + void (*recover)(void); }; #ifdef CONFIG_HIBERNATION |